aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorKeith Harrison <keithh@protonmail.com>2023-01-07 10:23:03 -0500
committerHauke Mehrtens <hauke@hauke-m.de>2023-01-14 19:09:56 +0100
commitc13263ca07a8d0d7b7eeb02261723f409550c9dd (patch)
treeb3127c8c293b8db7bad43dcaed687c4d6e49f831 /target/linux
parentacd3b5e83b99879b326a940907a9ff334586f86b (diff)
downloadupstream-c13263ca07a8d0d7b7eeb02261723f409550c9dd.tar.gz
upstream-c13263ca07a8d0d7b7eeb02261723f409550c9dd.tar.bz2
upstream-c13263ca07a8d0d7b7eeb02261723f409550c9dd.zip
ramips: add support for D-Link DIR-1935 A1
Add support for D-Link DIR-1935 A1 based on similarities to DIR-882 A1, DIR-867 A1 and other DIR-8xx A1 models. Existing DIR-882 A1 openwrt "factory" firmware installs without modificaitons via the D-Link Recovery GUI and has no known incompatibilities with the DIR-1935 A1. Changes to be committed: new file: target/linux/ramips/dts/mt7621_dlink_dir-1935-a1.dts modified: target/linux/ramips/image/mt7621.mk modified: target/linux/ramips/mt7621/base-files/etc/board.d/01_leds Specifications: * Board: Not known * SoC: MediaTek MT7621 Family * RAM: 128 MB (DDR3) * Flash: 16 MB (SPI NOR) * WiFi: MediaTek MT7615 Family (x2) * Switch: 1 WAN, 4 LAN (Gigabit) * Ports: 1 USB 3.0 * Buttons: Reset, WiFi Toggle, WPS * LEDs: Power (green/orange), Internet (green/orange), WiFi 2.4G (green), WiFi 5G (green) Notes: * 160MHz 5GHz is available in LuCi but does not appear to work (i.e. no SSID is visible in wifi scanning apps on other devices) with either official DIR-882 A1 firmware or a test build for the DIR-1935 A1 based on the 22.03.2 branch. 80 MHz 5GHz works. Serial port: * Untested (potential user damage/error) * Expected to be identical to other DIR-8xx A1 models: * Parameters: 57600, 8N1 * Location: J1 header (close to the Reset, WiFi and WPS buttons) * Pinout: 1 - VCC 2 - RXD 3 - TXD 4 - GND Installation: * D-Link Recovery GUI: power down the router, press and hold the reset button, then re-plug it. Keep the reset button pressed until the power LED starts flashing orange, manually assign a static IP address under the 192.168.0.xxx subnet (e.g. 192.168.0.2) and go to http://192.168.0.1 * Some modern browsers may have problems flashing via the Recovery GUI, if that occurs consider uploading the firmware through cURL: curl -v -i -F "firmware=@file.bin" 192.168.0.1 Signed-off-by: Keith Harrison <keithh@protonmail.com>
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ramips/dts/mt7621_dlink_dir-1935-a1.dts37
-rw-r--r--target/linux/ramips/image/mt7621.mk8
-rw-r--r--target/linux/ramips/mt7621/base-files/etc/board.d/01_leds1
3 files changed, 46 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/mt7621_dlink_dir-1935-a1.dts b/target/linux/ramips/dts/mt7621_dlink_dir-1935-a1.dts
new file mode 100644
index 0000000000..a6a0eb8ba0
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_dlink_dir-1935-a1.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621_dlink_dir-8xx.dtsi"
+#include "mt7621_dlink_flash-16m-a1.dtsi"
+
+/ {
+ compatible = "dlink,dir-1935-a1", "mediatek,mt7621-soc";
+ model = "D-Link DIR-1935 A1";
+
+ aliases {
+ label-mac-device = &gmac0;
+ };
+};
+
+&gmac0 {
+ nvmem-cells = <&macaddr_factory_e000>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+ nvmem-cells = <&macaddr_factory_e006>;
+ nvmem-cell-names = "mac-address";
+};
+
+&factory {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_factory_e000: macaddr@e000 {
+ reg = <0xe000 0x6>;
+ };
+
+ macaddr_factory_e006: macaddr@e006 {
+ reg = <0xe006 0x6>;
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 9644b14c3f..ca3766365c 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -540,6 +540,14 @@ define Device/dlink_dir-xx60-a1
check-size
endef
+define Device/dlink_dir-1935-a1
+ $(Device/dlink_dir-8xx-a1)
+ DEVICE_MODEL := DIR-1935
+ DEVICE_VARIANT := A1
+ DEVICE_PACKAGES += kmod-usb3
+endef
+TARGET_DEVICES += dlink_dir-1935-a1
+
define Device/dlink_dir-1960-a1
$(Device/dlink_dir-xx60-a1)
DEVICE_MODEL := DIR-1960
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
index 0f0d8009ca..91f3fe6e93 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
@@ -78,6 +78,7 @@ dlink,dir-853-a3)
dlink,dir-853-r1)
ucidef_set_led_netdev "internet" "internet" "blue:net" "wan"
;;
+dlink,dir-1935-a1|\
dlink,dir-860l-b1|\
dlink,dir-867-a1|\
dlink,dir-878-a1|\