aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorÁlvaro Fernández Rojas <noltari@gmail.com>2023-06-15 18:16:21 +0200
committerÁlvaro Fernández Rojas <noltari@gmail.com>2023-06-16 09:50:34 +0200
commit66e1bef8f73b5857e7791d04643e2e580741dd9f (patch)
treec36a1e9ce29132e3b0284f51b2e949f5fc9e77c4 /target/linux
parentb073d6cf7a7116d92f3de4bb59124e3ed0466420 (diff)
downloadupstream-66e1bef8f73b5857e7791d04643e2e580741dd9f.tar.gz
upstream-66e1bef8f73b5857e7791d04643e2e580741dd9f.tar.bz2
upstream-66e1bef8f73b5857e7791d04643e2e580741dd9f.zip
bmips: add support for Comtrend VG-8050
The Comtrend VG-8050 is a wifi gigabit ethernet router, 2.4 GHz single band with two external antennas. Hardware: - SoC: Broadcom BCM63169 - CPU: dual core BMIPS4350 @ 400Mhz - RAM: 128 MB DDR - Flash: 128 MB NAND - LAN switch: Broadcom BCM53125, 5x 1Gbit - Wifi 2.4 GHz: SoC (BCM63268) 802.11bgn - USB: 1x 2.0 (optional) - Buttons: 2x (reset) - LEDs: yes - UART: yes Installation via CFE web UI: 1. Power off the router. 2. Press reset button near the power switch. 3. Keep it pressed while powering up during ~20+ seconds. 4. Browse to http://192.168.1.1 and upload the firmware. 5. Wait a few minutes for it to finish. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 47cc09aa7a9a12cb7b18ef96f0b5d0bcb5d84b9e)
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/bmips/bcm63268/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/bmips/bcm63268/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/bmips/dts/bcm63169-comtrend-vg-8050.dts237
-rw-r--r--target/linux/bmips/image/bcm63268.mk19
4 files changed, 258 insertions, 0 deletions
diff --git a/target/linux/bmips/bcm63268/base-files/etc/board.d/02_network b/target/linux/bmips/bcm63268/base-files/etc/board.d/02_network
index ad7f2432e2..7fb9333cc1 100644
--- a/target/linux/bmips/bcm63268/base-files/etc/board.d/02_network
+++ b/target/linux/bmips/bcm63268/base-files/etc/board.d/02_network
@@ -16,6 +16,7 @@ sercomm,h500-s-vfes)
ucidef_set_interface "qtn" device "wifi" protocol "static" ipaddr "1.1.1.1" netmask "255.255.255.252"
uci add_list firewall.@zone[0].network='qtn'
;;
+comtrend,vg-8050 |\
sercomm,shg2500)
ucidef_set_bridge_device switch
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
diff --git a/target/linux/bmips/bcm63268/base-files/lib/upgrade/platform.sh b/target/linux/bmips/bcm63268/base-files/lib/upgrade/platform.sh
index befffd346e..fd309d3809 100644
--- a/target/linux/bmips/bcm63268/base-files/lib/upgrade/platform.sh
+++ b/target/linux/bmips/bcm63268/base-files/lib/upgrade/platform.sh
@@ -9,6 +9,7 @@ platform_check_image() {
platform_do_upgrade() {
case "$(board_name)" in
+ comtrend,vg-8050 |\
comtrend,vr-3032u)
CI_JFFS2_CLEAN_MARKERS=1
nand_do_upgrade "$1"
diff --git a/target/linux/bmips/dts/bcm63169-comtrend-vg-8050.dts b/target/linux/bmips/dts/bcm63169-comtrend-vg-8050.dts
new file mode 100644
index 0000000000..bf96673af8
--- /dev/null
+++ b/target/linux/bmips/dts/bcm63169-comtrend-vg-8050.dts
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "bcm63268.dtsi"
+
+/ {
+ model = "Comtrend VG-8050";
+ compatible = "comtrend,vg-8050", "brcm,bcm63169", "brcm,bcm63268";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ethernet {
+ status = "okay";
+
+ nvmem-cells = <&macaddr_cferom_6a0>;
+ nvmem-cell-names = "mac-address";
+};
+
+&hsspi {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hsspi_cs5>;
+
+ switch@5 {
+ compatible = "brcm,bcm53125";
+ reg = <5>;
+ spi-max-frequency = <781000>;
+ spi-cpha;
+ spi-cpol;
+ dsa,member = <1 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan4";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan3";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan1";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@8 {
+ reg = <8>;
+
+ phy-mode = "rgmii";
+ ethernet = <&switch0port6>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
+
+&leds {
+ status = "okay";
+
+ brcm,serial-leds;
+ brcm,serial-dat-low;
+ brcm,serial-shift-inv;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_serial_led>;
+
+ led@2 {
+ reg = <2>;
+ active-low;
+ label = "red:internet";
+ };
+
+ led_power_red: led@3 {
+ reg = <3>;
+ active-low;
+ label = "red:power";
+ panic-indicator;
+ };
+
+ led_power_green: led@6 {
+ reg = <6>;
+ active-low;
+ label = "green:power";
+ };
+
+ led@7 {
+ reg = <7>;
+ active-low;
+ label = "green:wps";
+ };
+
+ led@8 {
+ reg = <8>;
+ active-low;
+ label = "green:internet";
+ };
+
+ led@10 {
+ reg = <10>;
+ active-low;
+ label = "green:voip";
+ };
+
+ led@12 {
+ reg = <12>;
+ active-low;
+ label = "red:voip";
+ };
+
+ led@14 {
+ reg = <14>;
+ active-low;
+ label = "red:wps";
+ };
+};
+
+&nflash {
+ status = "okay";
+
+ nandcs@0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-ecc-step-size = <512>;
+ nand-ecc-strength = <15>;
+ nand-on-flash-bbt;
+ brcm,nand-oob-sector-size = <64>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cferom: partition@0 {
+ label = "cferom";
+ reg = <0x0000000 0x0020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "brcm,wfi-split";
+ label = "wfi";
+ reg = <0x0020000 0x7ac0000>;
+ };
+ };
+ };
+};
+
+&ohci {
+ status = "okay";
+};
+
+&switch0 {
+ dsa,member = <0 0>;
+
+ ports {
+ switch0port6: port@6 {
+ reg = <6>;
+ label = "extsw";
+
+ phy-mode = "rgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usbh {
+ status = "okay";
+};
+
+&cferom {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_cferom_6a0: macaddr@6a0 {
+ reg = <0x6a0 0x6>;
+ };
+};
diff --git a/target/linux/bmips/image/bcm63268.mk b/target/linux/bmips/image/bcm63268.mk
index 6e27b16624..941e83f71b 100644
--- a/target/linux/bmips/image/bcm63268.mk
+++ b/target/linux/bmips/image/bcm63268.mk
@@ -1,5 +1,24 @@
# SPDX-License-Identifier: GPL-2.0-or-later
+define Device/comtrend_vg-8050
+ $(Device/bcm63xx-nand)
+ DEVICE_VENDOR := Comtrend
+ DEVICE_MODEL := VG-8050
+ CHIP_ID := 63268
+ SOC := bcm63169
+ CFE_RAM_FILE := comtrend,vg-8050/cferam.000
+ CFE_RAM_JFFS2_NAME := cferam.000
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ SUBPAGESIZE := 512
+ VID_HDR_OFFSET := 2048
+ DEVICE_PACKAGES += $(USB2_PACKAGES) \
+ kmod-leds-bcm6328
+ CFE_WFI_FLASH_TYPE := 3
+ CFE_WFI_VERSION := 0x5732
+endef
+TARGET_DEVICES += comtrend_vg-8050
+
define Device/comtrend_vr-3032u
$(Device/bcm63xx-nand)
DEVICE_VENDOR := Comtrend