kernel: update 3.18 to 3.18.21

Changelog:
 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.21

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46768

19 files changed, 43 insertions, 78 deletions

diff --git a/target/linux/brcm2708/patches-3.18/0019-Add-Chris-Boot-s-i2c-and-spi-drivers.patch b/target/linux/brcm2708/patches-3.18/0019-Add-Chris-Boot-s-i2c-and-spi-drivers.patch
index 95e4a6d244..7795597451 100644
--- a/target/linux/brcm2708/patches-3.18/0019-Add-Chris-Boot-s-i2c-and-spi-drivers.patch
+++ b/target/linux/brcm2708/patches-3.18/0019-Add-Chris-Boot-s-i2c-and-spi-drivers.patch
@@ -212,7 +212,7 @@ The correct baudrate is shown in the log after the cdiv > 0xffff correction.
  static void timer_set_mode(enum clock_event_mode mode,
 --- a/drivers/i2c/busses/Kconfig
 +++ b/drivers/i2c/busses/Kconfig
-@@ -371,6 +371,25 @@ config I2C_BCM2835
+@@ -372,6 +372,25 @@ config I2C_BCM2835
  	  This support is also available as a module.  If so, the module
  	  will be called i2c-bcm2835.
  
diff --git a/target/linux/brcm2708/patches-3.18/0053-i2c-bcm2708-add-device-tree-support.patch b/target/linux/brcm2708/patches-3.18/0053-i2c-bcm2708-add-device-tree-support.patch
index acf920359b..0269052ae3 100644
--- a/target/linux/brcm2708/patches-3.18/0053-i2c-bcm2708-add-device-tree-support.patch
+++ b/target/linux/brcm2708/patches-3.18/0053-i2c-bcm2708-add-device-tree-support.patch
@@ -147,7 +147,7 @@ Signed-off-by: Noralf Tronnes <notro@tronnes.org>
  	bcm_register_device(&bcm2835_thermal_device);
 --- a/drivers/i2c/busses/Kconfig
 +++ b/drivers/i2c/busses/Kconfig
-@@ -361,7 +361,7 @@ config I2C_AXXIA
+@@ -362,7 +362,7 @@ config I2C_AXXIA
  
  config I2C_BCM2835
  	tristate "Broadcom BCM2835 I2C controller"
diff --git a/target/linux/brcm2708/patches-3.18/0089-Add-2709-platform-for-Raspberry-Pi-2.patch b/target/linux/brcm2708/patches-3.18/0089-Add-2709-platform-for-Raspberry-Pi-2.patch
index 6878838590..c1e938bb33 100644
--- a/target/linux/brcm2708/patches-3.18/0089-Add-2709-platform-for-Raspberry-Pi-2.patch
+++ b/target/linux/brcm2708/patches-3.18/0089-Add-2709-platform-for-Raspberry-Pi-2.patch
@@ -9352,7 +9352,7 @@ Subject: [PATCH 089/114] Add 2709 platform for Raspberry Pi 2
  
 --- a/drivers/i2c/busses/Kconfig
 +++ b/drivers/i2c/busses/Kconfig
-@@ -361,7 +361,7 @@ config I2C_AXXIA
+@@ -362,7 +362,7 @@ config I2C_AXXIA
  
  config I2C_BCM2835
  	tristate "Broadcom BCM2835 I2C controller"
@@ -9361,7 +9361,7 @@ Subject: [PATCH 089/114] Add 2709 platform for Raspberry Pi 2
  	help
  	  If you say yes to this option, support will be included for the
  	  BCM2835 I2C controller.
-@@ -373,7 +373,7 @@ config I2C_BCM2835
+@@ -374,7 +374,7 @@ config I2C_BCM2835
  
  config I2C_BCM2708
  	tristate "BCM2708 BSC"
diff --git a/target/linux/brcm47xx/patches-3.18/159-cpu_fixes.patch b/target/linux/brcm47xx/patches-3.18/159-cpu_fixes.patch
index dd430f52dd..48cf095d0e 100644
--- a/target/linux/brcm47xx/patches-3.18/159-cpu_fixes.patch
+++ b/target/linux/brcm47xx/patches-3.18/159-cpu_fixes.patch
@@ -242,7 +242,7 @@
  #endif /* _ASM_R4KCACHE_H */
 --- a/arch/mips/include/asm/stackframe.h
 +++ b/arch/mips/include/asm/stackframe.h
-@@ -333,6 +333,10 @@
+@@ -358,6 +358,10 @@
  		.macro	RESTORE_SP_AND_RET
  		LONG_L	sp, PT_R29(sp)
  		.set	arch=r4000
diff --git a/target/linux/brcm63xx/patches-3.18/572-board_VR-3026e.patch b/target/linux/brcm63xx/patches-3.18/572-board_VR-3026e.patch
index 260602adca..4358afda59 100644
--- a/target/linux/brcm63xx/patches-3.18/572-board_VR-3026e.patch
+++ b/target/linux/brcm63xx/patches-3.18/572-board_VR-3026e.patch
@@ -1,9 +1,9 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
 @@ -2168,6 +2168,60 @@ static struct board_info __initdata boar
-	},
+ 	},
  };
-
+ 
 +static struct sprom_fixup __initdata vr3026e_fixups[] = {
 +	{ .offset = 97, .value = 0xfeb3 },
 +	{ .offset = 98, .value = 0x1618 },
@@ -59,21 +59,21 @@
 +};
 +
  static struct b53_platform_data WAP5813n_b53_pdata = {
-	.alias = "eth0",
+ 	.alias = "eth0",
  };
 @@ -2472,6 +2526,7 @@ static const struct board_info __initcon
-	&board_P870HW51A_V2,
-	&board_VR3025u,
-	&board_VR3025un,
+ 	&board_P870HW51A_V2,
+ 	&board_VR3025u,
+ 	&board_VR3025un,
 +	&board_VR3026e,
-	&board_WAP5813n,
+ 	&board_WAP5813n,
  #endif
  #ifdef CONFIG_BCM63XX_CPU_63268
 @@ -2572,6 +2627,7 @@ static struct of_device_id const bcm963x
-	{ .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
-	{ .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
-	{ .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
+ 	{ .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
+ 	{ .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
+ 	{ .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
 +	{ .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, },
-	{ .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
-	{ .compatible = "huawei,hg655b", .data = &board_HG655b, },
-	{ .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B, },
+ 	{ .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
+ 	{ .compatible = "huawei,hg655b", .data = &board_HG655b, },
+ 	{ .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B, },
diff --git a/target/linux/cns3xxx/patches-3.18/070-i2c_support.patch b/target/linux/cns3xxx/patches-3.18/070-i2c_support.patch
index 0114d7e781..ff6be6a1ba 100644
--- a/target/linux/cns3xxx/patches-3.18/070-i2c_support.patch
+++ b/target/linux/cns3xxx/patches-3.18/070-i2c_support.patch
@@ -1,6 +1,6 @@
 --- a/drivers/i2c/busses/Kconfig
 +++ b/drivers/i2c/busses/Kconfig
-@@ -416,6 +416,18 @@ config I2C_CBUS_GPIO
+@@ -417,6 +417,18 @@ config I2C_CBUS_GPIO
  	  This driver can also be built as a module.  If so, the module
  	  will be called i2c-cbus-gpio.
  
diff --git a/target/linux/generic/patches-3.18/130-MIPS-kernel-fix-sched_getaffinity-with-MT-FPAFF-enab.patch b/target/linux/generic/patches-3.18/130-MIPS-kernel-fix-sched_getaffinity-with-MT-FPAFF-enab.patch
deleted file mode 100644
index a7bfef347c..0000000000
--- a/target/linux/generic/patches-3.18/130-MIPS-kernel-fix-sched_getaffinity-with-MT-FPAFF-enab.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Sun, 19 Jul 2015 00:21:57 +0200
-Subject: [PATCH] MIPS: kernel: fix sched_getaffinity with MT FPAFF enabled
-
-p->thread.user_cpus_allowed is zero-initialized and is only filled on
-the first sched_setaffinity call.
-
-To avoid adding overhead in the task initialization codepath, simply OR
-the returned mask in sched_getaffinity with p->cpus_allowed.
-
-Cc: stable@vger.kernel.org
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/arch/mips/kernel/mips-mt-fpaff.c
-+++ b/arch/mips/kernel/mips-mt-fpaff.c
-@@ -154,7 +154,7 @@ asmlinkage long mipsmt_sys_sched_getaffi
- 				      unsigned long __user *user_mask_ptr)
- {
- 	unsigned int real_len;
--	cpumask_t mask;
-+	cpumask_t allowed, mask;
- 	int retval;
- 	struct task_struct *p;
- 
-@@ -173,7 +173,8 @@ asmlinkage long mipsmt_sys_sched_getaffi
- 	if (retval)
- 		goto out_unlock;
- 
--	cpumask_and(&mask, &p->thread.user_cpus_allowed, cpu_possible_mask);
-+	cpumask_or(&allowed, &p->thread.user_cpus_allowed, &p->cpus_allowed);
-+	cpumask_and(&mask, &allowed, cpu_active_mask);
- 
- out_unlock:
- 	read_unlock(&tasklist_lock);
diff --git a/target/linux/generic/patches-3.18/834-ledtrig-libata.patch b/target/linux/generic/patches-3.18/834-ledtrig-libata.patch
index 1360ce9fb8..4c0ffcac91 100644
--- a/target/linux/generic/patches-3.18/834-ledtrig-libata.patch
+++ b/target/linux/generic/patches-3.18/834-ledtrig-libata.patch
@@ -69,7 +69,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  /**
   *	ata_build_rw_tf - Build ATA taskfile for given read/write request
   *	@tf: Target ATA taskfile
-@@ -4761,6 +4774,9 @@ static struct ata_queued_cmd *ata_qc_new
+@@ -4798,6 +4811,9 @@ static struct ata_queued_cmd *ata_qc_new
  			break;
  		}
  	}
@@ -79,7 +79,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  
  	return qc;
  }
-@@ -5671,6 +5687,9 @@ struct ata_port *ata_port_alloc(struct a
+@@ -5708,6 +5724,9 @@ struct ata_port *ata_port_alloc(struct a
  	ap->stats.unhandled_irq = 1;
  	ap->stats.idle_irq = 1;
  #endif
@@ -89,7 +89,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  	ata_sff_port_init(ap);
  
  	return ap;
-@@ -5692,6 +5711,12 @@ static void ata_host_release(struct devi
+@@ -5729,6 +5748,12 @@ static void ata_host_release(struct devi
  
  		kfree(ap->pmp_link);
  		kfree(ap->slave_link);
@@ -102,7 +102,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  		kfree(ap);
  		host->ports[i] = NULL;
  	}
-@@ -6138,7 +6163,23 @@ int ata_host_register(struct ata_host *h
+@@ -6175,7 +6200,23 @@ int ata_host_register(struct ata_host *h
  		host->ports[i]->print_id = atomic_inc_return(&ata_print_id);
  		host->ports[i]->local_port_no = i + 1;
  	}
@@ -138,7 +138,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  
  /*
   * Define if arch has non-standard setup.  This is a _PCI_ standard
-@@ -872,6 +875,12 @@ struct ata_port {
+@@ -874,6 +877,12 @@ struct ata_port {
  #ifdef CONFIG_ATA_ACPI
  	struct ata_acpi_gtm	__acpi_init_gtm; /* use ata_acpi_init_gtm() */
  #endif
diff --git a/target/linux/generic/patches-3.18/921-use_preinit_as_init.patch b/target/linux/generic/patches-3.18/921-use_preinit_as_init.patch
index d297e3bc30..57c2fe27be 100644
--- a/target/linux/generic/patches-3.18/921-use_preinit_as_init.patch
+++ b/target/linux/generic/patches-3.18/921-use_preinit_as_init.patch
@@ -1,6 +1,6 @@
 --- a/init/main.c
 +++ b/init/main.c
-@@ -962,7 +962,8 @@ static int __ref kernel_init(void *unuse
+@@ -963,7 +963,8 @@ static int __ref kernel_init(void *unuse
  		pr_err("Failed to execute %s (error %d).  Attempting defaults...\n",
  			execute_command, ret);
  	}
diff --git a/target/linux/lantiq/patches-3.18/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch b/target/linux/lantiq/patches-3.18/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
index 819eb322cb..4f655db499 100644
--- a/target/linux/lantiq/patches-3.18/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
+++ b/target/linux/lantiq/patches-3.18/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
@@ -18,7 +18,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 
 --- a/drivers/i2c/busses/Kconfig
 +++ b/drivers/i2c/busses/Kconfig
-@@ -553,6 +553,16 @@ config I2C_KEMPLD
+@@ -554,6 +554,16 @@ config I2C_KEMPLD
  	  This driver can also be built as a module. If so, the module
  	  will be called i2c-kempld.
  
diff --git a/target/linux/lantiq/patches-3.18/0101-mtd-split.patch b/target/linux/lantiq/patches-3.18/0101-mtd-split.patch
index 6753a2156c..6152e0e211 100644
--- a/target/linux/lantiq/patches-3.18/0101-mtd-split.patch
+++ b/target/linux/lantiq/patches-3.18/0101-mtd-split.patch
@@ -164,7 +164,7 @@
  				 enum mtd_parser_type type,
 --- a/drivers/mtd/mtdpart.c
 +++ b/drivers/mtd/mtdpart.c
-@@ -627,7 +627,7 @@ out_register:
+@@ -628,7 +628,7 @@ out_register:
  }
  
  
@@ -173,7 +173,7 @@
  __mtd_add_partition(struct mtd_info *master, const char *name,
  		    long long offset, long long length, bool dup_check)
  {
-@@ -748,7 +748,7 @@ run_parsers_by_type(struct mtd_part *sla
+@@ -749,7 +749,7 @@ run_parsers_by_type(struct mtd_part *sla
  	return nr_parts;
  }
  
@@ -182,7 +182,7 @@
  mtd_pad_erasesize(struct mtd_info *mtd, int offset, int len)
  {
  	unsigned long mask = mtd->erasesize - 1;
-@@ -818,7 +818,6 @@ static void split_uimage(struct mtd_info
+@@ -819,7 +819,6 @@ static void split_uimage(struct mtd_info
  		return;
  
  	len = be32_to_cpu(hdr.size) + 0x40;
diff --git a/target/linux/ramips/patches-3.18/0037-USB-phy-add-ralink-SoC-driver.patch b/target/linux/ramips/patches-3.18/0037-USB-phy-add-ralink-SoC-driver.patch
index 5a7d416726..2448d0ab31 100644
--- a/target/linux/ramips/patches-3.18/0037-USB-phy-add-ralink-SoC-driver.patch
+++ b/target/linux/ramips/patches-3.18/0037-USB-phy-add-ralink-SoC-driver.patch
@@ -1,6 +1,6 @@
 --- a/drivers/phy/Kconfig
 +++ b/drivers/phy/Kconfig
-@@ -239,6 +239,11 @@
+@@ -239,6 +239,11 @@ config PHY_XGENE
  	help
  	  This option enables support for APM X-Gene SoC multi-purpose PHY.
  
@@ -14,7 +14,7 @@
  	depends on RESET_CONTROLLER
 --- a/drivers/phy/Makefile
 +++ b/drivers/phy/Makefile
-@@ -31,3 +31,4 @@
+@@ -31,3 +31,4 @@ obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY)	+=
  obj-$(CONFIG_PHY_XGENE)			+= phy-xgene.o
  obj-$(CONFIG_PHY_STIH407_USB)		+= phy-stih407-usb.o
  obj-$(CONFIG_PHY_STIH41X_USB)		+= phy-stih41x-usb.o
diff --git a/target/linux/ramips/patches-3.18/0052-i2c-MIPS-adds-ralink-I2C-driver.patch b/target/linux/ramips/patches-3.18/0052-i2c-MIPS-adds-ralink-I2C-driver.patch
index 8ed061070a..0cf554265e 100644
--- a/target/linux/ramips/patches-3.18/0052-i2c-MIPS-adds-ralink-I2C-driver.patch
+++ b/target/linux/ramips/patches-3.18/0052-i2c-MIPS-adds-ralink-I2C-driver.patch
@@ -45,7 +45,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +};
 --- a/drivers/i2c/busses/Kconfig
 +++ b/drivers/i2c/busses/Kconfig
-@@ -710,6 +710,10 @@ config I2C_RK3X
+@@ -711,6 +711,10 @@ config I2C_RK3X
  	  This driver can also be built as a module. If so, the module will
  	  be called i2c-rk3x.
  
diff --git a/target/linux/ramips/patches-3.18/0060-soc_type.patch b/target/linux/ramips/patches-3.18/0060-soc_type.patch
index 292a4ad456..41cc1208c3 100644
--- a/target/linux/ramips/patches-3.18/0060-soc_type.patch
+++ b/target/linux/ramips/patches-3.18/0060-soc_type.patch
@@ -219,7 +219,7 @@
  {
 --- a/arch/mips/ralink/mt7621.c
 +++ b/arch/mips/ralink/mt7621.c
-@@ -176,6 +176,7 @@ void prom_soc_init(struct ralink_soc_inf
+@@ -193,6 +193,7 @@ void prom_soc_init(struct ralink_soc_inf
  	soc_info->mem_size_min = MT7621_DDR2_SIZE_MIN;
  	soc_info->mem_size_max = MT7621_DDR2_SIZE_MAX;
  	soc_info->mem_base = MT7621_DRAM_BASE;
diff --git a/target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch b/target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch
index 15f5ee8378..98e8ca5a49 100644
--- a/target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch
+++ b/target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch
@@ -5546,7 +5546,7 @@
  	ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs);
  	new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
  
-@@ -4451,8 +4597,14 @@ static u16 xhci_call_host_update_timeout
+@@ -4454,8 +4600,14 @@ static u16 xhci_call_host_update_timeout
  		u16 *timeout)
  {
  	if (state == USB3_LPM_U1)
@@ -5561,7 +5561,7 @@
  		return xhci_calculate_u2_timeout(xhci, udev, desc);
  
  	return USB3_LPM_DISABLED;
-@@ -4837,7 +4989,9 @@ int xhci_gen_setup(struct usb_hcd *hcd,
+@@ -4840,7 +4992,9 @@ int xhci_gen_setup(struct usb_hcd *hcd,
  	hcd->self.no_sg_constraint = 1;
  
  	/* XHCI controllers don't stop the ep queue on short packets :| */
@@ -5571,7 +5571,7 @@
  
  	if (usb_hcd_is_primary_hcd(hcd)) {
  		xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL);
-@@ -4900,6 +5054,10 @@ int xhci_gen_setup(struct usb_hcd *hcd,
+@@ -4903,6 +5057,10 @@ int xhci_gen_setup(struct usb_hcd *hcd,
  		goto error;
  	xhci_dbg(xhci, "Reset complete\n");
  
@@ -5582,7 +5582,7 @@
  	/* Set dma_mask and coherent_dma_mask to 64-bits,
  	 * if xHC supports 64-bit addressing */
  	if (HCC_64BIT_ADDR(xhci->hcc_params) &&
-@@ -4994,8 +5152,57 @@ MODULE_DESCRIPTION(DRIVER_DESC);
+@@ -4997,8 +5155,57 @@ MODULE_DESCRIPTION(DRIVER_DESC);
  MODULE_AUTHOR(DRIVER_AUTHOR);
  MODULE_LICENSE("GPL");
  
diff --git a/target/linux/ramips/patches-3.18/0065-fix_dts_cache_issues.patch b/target/linux/ramips/patches-3.18/0065-fix_dts_cache_issues.patch
index 42c04aef96..520c570ee2 100644
--- a/target/linux/ramips/patches-3.18/0065-fix_dts_cache_issues.patch
+++ b/target/linux/ramips/patches-3.18/0065-fix_dts_cache_issues.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/kernel/setup.c
 +++ b/arch/mips/kernel/setup.c
-@@ -675,7 +675,6 @@
+@@ -675,7 +675,6 @@ static void __init arch_mem_init(char **
  				crashk_res.end - crashk_res.start + 1,
  				BOOTMEM_DEFAULT);
  #endif
@@ -8,7 +8,7 @@
  	sparse_init();
  	plat_swiotlb_setup();
  	paging_init();
-@@ -784,6 +783,7 @@
+@@ -784,6 +783,7 @@ void __init setup_arch(char **cmdline_p)
  	prefill_possible_map();
  
  	cpu_cache_init();
diff --git a/target/linux/ramips/patches-3.18/0074-i2c-MIPS-add-mt7621-I2C-driver.patch b/target/linux/ramips/patches-3.18/0074-i2c-MIPS-add-mt7621-I2C-driver.patch
index b34581ed63..9b9a72bc7b 100644
--- a/target/linux/ramips/patches-3.18/0074-i2c-MIPS-add-mt7621-I2C-driver.patch
+++ b/target/linux/ramips/patches-3.18/0074-i2c-MIPS-add-mt7621-I2C-driver.patch
@@ -1,6 +1,6 @@
 --- a/drivers/i2c/busses/Kconfig
 +++ b/drivers/i2c/busses/Kconfig
-@@ -714,6 +714,10 @@ config I2C_RALINK
+@@ -715,6 +715,10 @@ config I2C_RALINK
  	tristate "Ralink I2C Controller"
  	select OF_I2C
  
diff --git a/target/linux/ramips/patches-3.18/0100-mtd-split-remove-padding.patch b/target/linux/ramips/patches-3.18/0100-mtd-split-remove-padding.patch
index 32cea7ded9..81702c28e8 100644
--- a/target/linux/ramips/patches-3.18/0100-mtd-split-remove-padding.patch
+++ b/target/linux/ramips/patches-3.18/0100-mtd-split-remove-padding.patch
@@ -1,6 +1,6 @@
 --- a/drivers/mtd/mtdpart.c
 +++ b/drivers/mtd/mtdpart.c
-@@ -818,9 +818,6 @@ static void split_uimage(struct mtd_info
+@@ -819,9 +819,6 @@ static void split_uimage(struct mtd_info
  		return;
  
  	len = be32_to_cpu(hdr.size) + 0x40;
diff --git a/target/linux/ramips/patches-3.18/0101-mtd-add-rtn56u-support.patch b/target/linux/ramips/patches-3.18/0101-mtd-add-rtn56u-support.patch
index 6f6458fc1c..50b88dbcd3 100644
--- a/target/linux/ramips/patches-3.18/0101-mtd-add-rtn56u-support.patch
+++ b/target/linux/ramips/patches-3.18/0101-mtd-add-rtn56u-support.patch
@@ -1,6 +1,6 @@
 --- a/drivers/mtd/mtdpart.c
 +++ b/drivers/mtd/mtdpart.c
-@@ -806,8 +806,11 @@ static void split_uimage(struct mtd_info
+@@ -807,8 +807,11 @@ static void split_uimage(struct mtd_info
  {
  	struct {
  		__be32 magic;
@@ -13,7 +13,7 @@
  	} hdr;
  	size_t len;
  
-@@ -817,7 +820,10 @@ static void split_uimage(struct mtd_info
+@@ -818,7 +821,10 @@ static void split_uimage(struct mtd_info
  	if (len != sizeof(hdr) || hdr.magic != cpu_to_be32(UBOOT_MAGIC))
  		return;