ar71xx: add AR724x PCIe init fixes

Add upstream send AR724x PCIe patches to get the PCIe controller out of
reset during driver init.

The AVM Fritz 300E bootloader doesn't take care of releasing the
different PCIe controller related resets which causes an endless hang
as soon as either the PCIE Reset register (0x180f0018) or the PCI
Application Control register (0x180f0000) is read from.

Signed-off-by: Mathias Kresin <dev@kresin.me>

8 files changed, 175 insertions, 33 deletions

diff --git a/target/linux/ar71xx/patches-4.4/106-01-MIPS-ath79-fix-AR724X_PLL_REG_PCIE_CONFIG-offset.patch b/target/linux/ar71xx/patches-4.4/106-01-MIPS-ath79-fix-AR724X_PLL_REG_PCIE_CONFIG-offset.patch
new file mode 100644
index 0000000000..e785b30eff
--- /dev/null
+++ b/target/linux/ar71xx/patches-4.4/106-01-MIPS-ath79-fix-AR724X_PLL_REG_PCIE_CONFIG-offset.patch
@@ -0,0 +1,29 @@
+From 0f15814bcdf59f10b708a3fba636acb089e9a4f1 Mon Sep 17 00:00:00 2001
+From: Mathias Kresin <dev@kresin.me>
+Date: Thu, 30 Mar 2017 15:34:39 +0200
+Subject: [PATCH] MIPS: ath79: fix AR724X_PLL_REG_PCIE_CONFIG offset
+
+According to the QCA u-boot source the "PCIE Phase Lock Loop
+Configuration (PCIE_PLL_CONFIG)" register is for all SoCs except the
+QCA955X and QCA956X at offset 0x10.
+
+Since the PCIE PLL config register is only defined for the AR724x fix
+only this value. The value is wrong since the day it was added and isn't
+yet used by any driver.
+
+Signed-off-by: Mathias Kresin <dev@kresin.me>
+---
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -167,7 +167,7 @@
+ #define AR71XX_AHB_DIV_MASK		0x7
+ 
+ #define AR724X_PLL_REG_CPU_CONFIG	0x00
+-#define AR724X_PLL_REG_PCIE_CONFIG	0x18
++#define AR724X_PLL_REG_PCIE_CONFIG	0x10
+ 
+ #define AR724X_PLL_FB_SHIFT		0
+ #define AR724X_PLL_FB_MASK		0x3ff
diff --git a/target/linux/ar71xx/patches-4.4/106-02-MIPS-ath79-do-AR724x-PCIe-root-complex-init.patch b/target/linux/ar71xx/patches-4.4/106-02-MIPS-ath79-do-AR724x-PCIe-root-complex-init.patch
new file mode 100644
index 0000000000..d3948b8353
--- /dev/null
+++ b/target/linux/ar71xx/patches-4.4/106-02-MIPS-ath79-do-AR724x-PCIe-root-complex-init.patch
@@ -0,0 +1,113 @@
+From 460f382c278fe66059a773c41cbcd0db86d53983 Mon Sep 17 00:00:00 2001
+From: Mathias Kresin <dev@kresin.me>
+Date: Thu, 13 Apr 2017 09:47:42 +0200
+Subject: [PATCH] MIPS: pci-ar724x: get PCIe controller out of reset
+
+The ar724x pci driver expects the PCIe controller to be brought out of
+reset by the bootloader.
+
+At least the AVM Fritz 300E bootloader doesn't take care of releasing
+the different PCIe controller related resets which causes an endless
+hang as soon as either the PCIE Reset register (0x180f0018) or the PCI
+Application Control register (0x180f0000) is read from.
+
+Do the full "PCIE Root Complex Initialization Sequence" if the PCIe
+host controller is still in reset during probing.
+
+The QCA u-boot sleeps 10ms after the PCIE Application Control bit is
+set to ready. It has been shown that 10ms might not be enough time if
+PCIe should be used right after setting the bit. During my tests it
+took up to 20ms till the link was up. Giving the link up to 100ms
+should work for all cases.
+
+Signed-off-by: Mathias Kresin <dev@kresin.me>
+---
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h |  3 ++
+ arch/mips/pci/pci-ar724x.c                     | 42 ++++++++++++++++++++++++++
+ 2 files changed, 45 insertions(+)
+
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -169,6 +169,9 @@
+ #define AR724X_PLL_REG_CPU_CONFIG	0x00
+ #define AR724X_PLL_REG_PCIE_CONFIG	0x10
+ 
++#define AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS	BIT(16)
++#define AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET	BIT(25)
++
+ #define AR724X_PLL_FB_SHIFT		0
+ #define AR724X_PLL_FB_MASK		0x3ff
+ #define AR724X_PLL_REF_DIV_SHIFT	10
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -12,14 +12,18 @@
+ #include <linux/irq.h>
+ #include <linux/pci.h>
+ #include <linux/module.h>
++#include <linux/delay.h>
+ #include <linux/platform_device.h>
+ #include <asm/mach-ath79/ath79.h>
+ #include <asm/mach-ath79/ar71xx_regs.h>
+ 
++#define AR724X_PCI_REG_APP		0x0
+ #define AR724X_PCI_REG_RESET		0x18
+ #define AR724X_PCI_REG_INT_STATUS	0x4c
+ #define AR724X_PCI_REG_INT_MASK		0x50
+ 
++#define AR724X_PCI_APP_LTSSM_ENABLE	BIT(0)
++
+ #define AR724X_PCI_RESET_LINK_UP	BIT(0)
+ 
+ #define AR724X_PCI_INT_DEV0		BIT(14)
+@@ -325,6 +329,37 @@ static void ar724x_pci_irq_init(struct a
+ 					 apc);
+ }
+ 
++static void ar724x_pci_hw_init(struct ar724x_pci_controller *apc)
++{
++	u32 ppl, app;
++	int wait = 0;
++
++	/* deassert PCIe host controller and PCIe PHY reset */
++	ath79_device_reset_clear(AR724X_RESET_PCIE);
++	ath79_device_reset_clear(AR724X_RESET_PCIE_PHY);
++
++	/* remove the reset of the PCIE PLL */
++	ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
++	ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET;
++	ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
++
++	/* deassert bypass for the PCIE PLL */
++	ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
++	ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS;
++	ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
++
++	/* set PCIE Application Control to ready */
++	app = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_APP);
++	app |= AR724X_PCI_APP_LTSSM_ENABLE;
++	__raw_writel(app, apc->ctrl_base + AR724X_PCI_REG_APP);
++
++	/* wait up to 100ms for PHY link up */
++	do {
++		mdelay(10);
++		wait++;
++	} while (wait < 10 && !ar724x_pci_check_link(apc));
++}
++
+ static int ar724x_pci_probe(struct platform_device *pdev)
+ {
+ 	struct ar724x_pci_controller *apc;
+@@ -383,6 +418,13 @@ static int ar724x_pci_probe(struct platf
+ 	apc->pci_controller.io_resource = &apc->io_res;
+ 	apc->pci_controller.mem_resource = &apc->mem_res;
+ 
++	/*
++	 * Do the full PCIE Root Complex Initialization Sequence if the PCIe
++	 * host controller is in reset.
++	 */
++	if (ath79_reset_rr(AR724X_RESET_REG_RESET_MODULE) & AR724X_RESET_PCIE)
++		ar724x_pci_hw_init(apc);
++
+ 	apc->link_up = ar724x_pci_check_link(apc);
+ 	if (!apc->link_up)
+ 		dev_warn(&pdev->dev, "PCIe link is down\n");
diff --git a/target/linux/ar71xx/patches-4.4/601-MIPS-ath79-add-more-register-defines.patch b/target/linux/ar71xx/patches-4.4/601-MIPS-ath79-add-more-register-defines.patch
index e4d82acf5e..d0f5b78901 100644
--- a/target/linux/ar71xx/patches-4.4/601-MIPS-ath79-add-more-register-defines.patch
+++ b/target/linux/ar71xx/patches-4.4/601-MIPS-ath79-add-more-register-defines.patch
@@ -66,9 +66,9 @@
 +#define AR71XX_ETH1_PLL_SHIFT		19
 +
  #define AR724X_PLL_REG_CPU_CONFIG	0x00
- #define AR724X_PLL_REG_PCIE_CONFIG	0x18
+ #define AR724X_PLL_REG_PCIE_CONFIG	0x10
  
-@@ -193,6 +212,8 @@
+@@ -196,6 +215,8 @@
  #define AR724X_DDR_DIV_SHIFT		22
  #define AR724X_DDR_DIV_MASK		0x3
  
@@ -77,7 +77,7 @@
  #define AR913X_PLL_REG_CPU_CONFIG	0x00
  #define AR913X_PLL_REG_ETH_CONFIG	0x04
  #define AR913X_PLL_REG_ETH0_INT_CLOCK	0x14
-@@ -205,6 +226,9 @@
+@@ -208,6 +229,9 @@
  #define AR913X_AHB_DIV_SHIFT		19
  #define AR913X_AHB_DIV_MASK		0x1
  
@@ -87,7 +87,7 @@
  #define AR933X_PLL_CPU_CONFIG_REG	0x00
  #define AR933X_PLL_CLOCK_CTRL_REG	0x08
  
-@@ -226,6 +250,8 @@
+@@ -229,6 +253,8 @@
  #define AR934X_PLL_CPU_CONFIG_REG		0x00
  #define AR934X_PLL_DDR_CONFIG_REG		0x04
  #define AR934X_PLL_CPU_DDR_CLK_CTRL_REG		0x08
@@ -96,7 +96,7 @@
  
  #define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT	0
  #define AR934X_PLL_CPU_CONFIG_NFRAC_MASK	0x3f
-@@ -258,9 +284,13 @@
+@@ -261,9 +287,13 @@
  #define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL	BIT(21)
  #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL	BIT(24)
  
@@ -110,7 +110,7 @@
  
  #define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT	0
  #define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK	0x3f
-@@ -385,16 +415,83 @@
+@@ -388,16 +418,83 @@
  #define AR913X_RESET_USB_HOST		BIT(5)
  #define AR913X_RESET_USB_PHY		BIT(4)
  
@@ -194,7 +194,7 @@
  #define AR933X_BOOTSTRAP_REF_CLK_40	BIT(0)
  
  #define AR934X_BOOTSTRAP_SW_OPTION8	BIT(23)
-@@ -536,8 +633,22 @@
+@@ -539,8 +636,22 @@
  #define AR71XX_GPIO_REG_INT_ENABLE	0x24
  #define AR71XX_GPIO_REG_FUNC		0x28
  
@@ -217,7 +217,7 @@
  #define AR71XX_GPIO_COUNT		16
  #define AR7240_GPIO_COUNT		18
  #define AR7241_GPIO_COUNT		20
-@@ -567,4 +678,235 @@
+@@ -570,4 +681,235 @@
  #define AR934X_SRIF_DPLL2_OUTDIV_SHIFT	13
  #define AR934X_SRIF_DPLL2_OUTDIV_MASK	0x7
  
diff --git a/target/linux/ar71xx/patches-4.4/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch b/target/linux/ar71xx/patches-4.4/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch
index 64ebf59366..d117f94021 100644
--- a/target/linux/ar71xx/patches-4.4/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch
+++ b/target/linux/ar71xx/patches-4.4/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch
@@ -459,7 +459,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
  /*
   * PLL block
   */
-@@ -286,6 +307,44 @@
+@@ -289,6 +310,44 @@
  
  #define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL	BIT(6)
  
@@ -504,7 +504,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
  #define QCA955X_PLL_CPU_CONFIG_REG		0x00
  #define QCA955X_PLL_DDR_CONFIG_REG		0x04
  #define QCA955X_PLL_CLK_CTRL_REG		0x08
-@@ -362,6 +421,10 @@
+@@ -365,6 +424,10 @@
  #define AR934X_RESET_REG_BOOTSTRAP		0xb0
  #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS	0xac
  
@@ -515,7 +515,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
  #define QCA955X_RESET_REG_RESET_MODULE		0x1c
  #define QCA955X_RESET_REG_BOOTSTRAP		0xb0
  #define QCA955X_RESET_REG_EXT_INT_STATUS	0xac
-@@ -457,6 +520,27 @@
+@@ -460,6 +523,27 @@
  #define AR934X_RESET_MBOX		BIT(1)
  #define AR934X_RESET_I2S		BIT(0)
  
@@ -543,7 +543,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
  #define QCA955X_RESET_HOST		BIT(31)
  #define QCA955X_RESET_SLIC		BIT(30)
  #define QCA955X_RESET_HDMA		BIT(29)
-@@ -510,6 +594,13 @@
+@@ -513,6 +597,13 @@
  #define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
  #define AR934X_BOOTSTRAP_DDR1		BIT(0)
  
@@ -557,7 +557,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
  #define QCA955X_BOOTSTRAP_REF_CLK_40	BIT(4)
  
  #define AR934X_PCIE_WMAC_INT_WMAC_MISC		BIT(0)
-@@ -530,6 +621,24 @@
+@@ -533,6 +624,24 @@
  	 AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \
  	 AR934X_PCIE_WMAC_INT_PCIE_RC3)
  
@@ -582,7 +582,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
  #define QCA955X_EXT_INT_WMAC_MISC		BIT(0)
  #define QCA955X_EXT_INT_WMAC_TX			BIT(1)
  #define QCA955X_EXT_INT_WMAC_RXLP		BIT(2)
-@@ -572,6 +681,8 @@
+@@ -575,6 +684,8 @@
  #define REV_ID_MAJOR_AR9341		0x0120
  #define REV_ID_MAJOR_AR9342		0x1120
  #define REV_ID_MAJOR_AR9344		0x2120
@@ -591,7 +591,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
  #define REV_ID_MAJOR_QCA9556		0x0130
  #define REV_ID_MAJOR_QCA9558		0x1130
  
-@@ -594,6 +705,8 @@
+@@ -597,6 +708,8 @@
  
  #define AR934X_REV_ID_REVISION_MASK	0xf
  
@@ -600,7 +600,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
  #define QCA955X_REV_ID_REVISION_MASK	0xf
  
  /*
-@@ -641,6 +754,25 @@
+@@ -644,6 +757,25 @@
  #define AR934X_GPIO_REG_OUT_FUNC5	0x40
  #define AR934X_GPIO_REG_FUNC		0x6c
  
@@ -626,7 +626,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
  #define QCA955X_GPIO_REG_OUT_FUNC0	0x2c
  #define QCA955X_GPIO_REG_OUT_FUNC1	0x30
  #define QCA955X_GPIO_REG_OUT_FUNC2	0x34
-@@ -655,6 +787,7 @@
+@@ -658,6 +790,7 @@
  #define AR913X_GPIO_COUNT		22
  #define AR933X_GPIO_COUNT		30
  #define AR934X_GPIO_COUNT		23
@@ -634,7 +634,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
  #define QCA955X_GPIO_COUNT		24
  
  /*
-@@ -678,6 +811,24 @@
+@@ -681,6 +814,24 @@
  #define AR934X_SRIF_DPLL2_OUTDIV_SHIFT	13
  #define AR934X_SRIF_DPLL2_OUTDIV_MASK	0x7
  
@@ -659,7 +659,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
  #define AR71XX_GPIO_FUNC_STEREO_EN		BIT(17)
  #define AR71XX_GPIO_FUNC_SLIC_EN		BIT(16)
  #define AR71XX_GPIO_FUNC_SPI_CS2_EN		BIT(13)
-@@ -884,6 +1035,16 @@
+@@ -887,6 +1038,16 @@
  #define AR934X_ETH_CFG_RDV_DELAY_SHIFT  16
  
  /*
diff --git a/target/linux/ar71xx/patches-4.4/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch b/target/linux/ar71xx/patches-4.4/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch
index d8bb248a14..1f3a19886d 100644
--- a/target/linux/ar71xx/patches-4.4/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch
+++ b/target/linux/ar71xx/patches-4.4/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch
@@ -522,7 +522,7 @@
   * DDR_CTRL block
   */
  #define AR71XX_DDR_REG_PCI_WIN0		0x7c
-@@ -382,6 +406,49 @@
+@@ -385,6 +409,49 @@
  #define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL		BIT(21)
  #define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL		BIT(24)
  
@@ -572,7 +572,7 @@
  /*
   * USB_CONFIG block
   */
-@@ -429,6 +496,11 @@
+@@ -432,6 +499,11 @@
  #define QCA955X_RESET_REG_BOOTSTRAP		0xb0
  #define QCA955X_RESET_REG_EXT_INT_STATUS	0xac
  
@@ -584,7 +584,7 @@
  #define MISC_INT_ETHSW			BIT(12)
  #define MISC_INT_TIMER4			BIT(10)
  #define MISC_INT_TIMER3			BIT(9)
-@@ -603,6 +675,8 @@
+@@ -606,6 +678,8 @@
  
  #define QCA955X_BOOTSTRAP_REF_CLK_40	BIT(4)
  
@@ -593,7 +593,7 @@
  #define AR934X_PCIE_WMAC_INT_WMAC_MISC		BIT(0)
  #define AR934X_PCIE_WMAC_INT_WMAC_TX		BIT(1)
  #define AR934X_PCIE_WMAC_INT_WMAC_RXLP		BIT(2)
-@@ -670,6 +744,37 @@
+@@ -673,6 +747,37 @@
  	 QCA955X_EXT_INT_PCIE_RC2_INT1 | QCA955X_EXT_INT_PCIE_RC2_INT2 | \
  	 QCA955X_EXT_INT_PCIE_RC2_INT3)
  
@@ -631,7 +631,7 @@
  #define REV_ID_MAJOR_MASK		0xfff0
  #define REV_ID_MAJOR_AR71XX		0x00a0
  #define REV_ID_MAJOR_AR913X		0x00b0
-@@ -685,6 +790,8 @@
+@@ -688,6 +793,8 @@
  #define REV_ID_MAJOR_QCA9533_V2		0x0160
  #define REV_ID_MAJOR_QCA9556		0x0130
  #define REV_ID_MAJOR_QCA9558		0x1130
@@ -640,7 +640,7 @@
  
  #define AR71XX_REV_ID_MINOR_MASK	0x3
  #define AR71XX_REV_ID_MINOR_AR7130	0x0
-@@ -709,6 +816,8 @@
+@@ -712,6 +819,8 @@
  
  #define QCA955X_REV_ID_REVISION_MASK	0xf
  
@@ -649,7 +649,7 @@
  /*
   * SPI block
   */
-@@ -781,6 +890,19 @@
+@@ -784,6 +893,19 @@
  #define QCA955X_GPIO_REG_OUT_FUNC5	0x40
  #define QCA955X_GPIO_REG_FUNC		0x6c
  
@@ -669,7 +669,7 @@
  #define AR71XX_GPIO_COUNT		16
  #define AR7240_GPIO_COUNT		18
  #define AR7241_GPIO_COUNT		20
-@@ -789,6 +911,7 @@
+@@ -792,6 +914,7 @@
  #define AR934X_GPIO_COUNT		23
  #define QCA953X_GPIO_COUNT		18
  #define QCA955X_GPIO_COUNT		24
diff --git a/target/linux/ar71xx/patches-4.4/622-MIPS-ath79-add-more-register-defines-for-QCA956x-SoC.patch b/target/linux/ar71xx/patches-4.4/622-MIPS-ath79-add-more-register-defines-for-QCA956x-SoC.patch
index 6573b298a5..cab2f6f9cb 100644
--- a/target/linux/ar71xx/patches-4.4/622-MIPS-ath79-add-more-register-defines-for-QCA956x-SoC.patch
+++ b/target/linux/ar71xx/patches-4.4/622-MIPS-ath79-add-more-register-defines-for-QCA956x-SoC.patch
@@ -11,7 +11,7 @@
  #define QCA956X_GMAC_BASE	(AR71XX_APB_BASE + 0x00070000)
  #define QCA956X_GMAC_SIZE	0x64
  
-@@ -411,6 +415,7 @@
+@@ -414,6 +418,7 @@
  #define QCA956X_PLL_DDR_CONFIG_REG			0x08
  #define QCA956X_PLL_DDR_CONFIG1_REG			0x0c
  #define QCA956X_PLL_CLK_CTRL_REG			0x10
@@ -19,7 +19,7 @@
  
  #define QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT		12
  #define QCA956X_PLL_CPU_CONFIG_REFDIV_MASK		0x1f
-@@ -1193,4 +1198,16 @@
+@@ -1196,4 +1201,16 @@
  #define QCA955X_ETH_CFG_TXE_DELAY_MASK	0x3
  #define QCA955X_ETH_CFG_TXE_DELAY_SHIFT	20
  
diff --git a/target/linux/ar71xx/patches-4.4/820-MIPS-ath79-add_gpio_function2_setup.patch b/target/linux/ar71xx/patches-4.4/820-MIPS-ath79-add_gpio_function2_setup.patch
index 4d72a6c67d..a773e57dec 100644
--- a/target/linux/ar71xx/patches-4.4/820-MIPS-ath79-add_gpio_function2_setup.patch
+++ b/target/linux/ar71xx/patches-4.4/820-MIPS-ath79-add_gpio_function2_setup.patch
@@ -48,7 +48,7 @@ functions on the Arduino Yun.
  	void __iomem *reg = ath79_gpio_get_function_reg();
 --- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
 +++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -862,6 +862,7 @@
+@@ -865,6 +865,7 @@
  #define AR71XX_GPIO_REG_INT_PENDING	0x20
  #define AR71XX_GPIO_REG_INT_ENABLE	0x24
  #define AR71XX_GPIO_REG_FUNC		0x28
@@ -56,7 +56,7 @@ functions on the Arduino Yun.
  
  #define AR934X_GPIO_REG_OUT_FUNC0	0x2c
  #define AR934X_GPIO_REG_OUT_FUNC1	0x30
-@@ -986,6 +987,8 @@
+@@ -989,6 +990,8 @@
  #define AR724X_GPIO_FUNC_UART_EN		BIT(1)
  #define AR724X_GPIO_FUNC_JTAG_DISABLE		BIT(0)
  
diff --git a/target/linux/ar71xx/patches-4.4/920-usb-chipidea-AR933x-platform-support.patch b/target/linux/ar71xx/patches-4.4/920-usb-chipidea-AR933x-platform-support.patch
index 1aa4120624..1a78af0779 100644
--- a/target/linux/ar71xx/patches-4.4/920-usb-chipidea-AR933x-platform-support.patch
+++ b/target/linux/ar71xx/patches-4.4/920-usb-chipidea-AR933x-platform-support.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
 +++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -656,6 +656,7 @@
+@@ -659,6 +659,7 @@
  
  #define AR933X_BOOTSTRAP_MDIO_GPIO_EN	BIT(18)
  #define AR933X_BOOTSTRAP_EEPBUSY	BIT(4)
@@ -8,7 +8,7 @@
  #define AR933X_BOOTSTRAP_REF_CLK_40	BIT(0)
  
  #define AR934X_BOOTSTRAP_SW_OPTION8	BIT(23)
-@@ -685,6 +686,8 @@
+@@ -688,6 +689,8 @@
  
  #define QCA956X_BOOTSTRAP_REF_CLK_40	BIT(2)