ipq40xx: revert usage of VLAN S-TAG

This reverts the usage of the S-Tag for separating LAN and WAN port on
the embedded switch. Many users complained about not being able to
manage C-Tag addition / removal on the switch as well as degraded
performance.

Fixes: commit 9da2b567605b ("ipq40xx: fix ethernet vlan double tagging")

Signed-off-by: David Bauer <mail@david-bauer.net>

2 files changed, 9 insertions, 37 deletions

diff --git a/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma_axi.c b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma_axi.c
index 49ee31a1bd..68718de9f4 100644
--- a/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma_axi.c
+++ b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma_axi.c
@@ -969,7 +969,7 @@ static int edma_axi_probe(struct platform_device *pdev)
 		edma_netdev[i]->max_mtu = 9000;
 		edma_netdev[i]->features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM
 				      | NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_SG |
-				      NETIF_F_TSO | NETIF_F_GRO;
+				      NETIF_F_TSO | NETIF_F_GRO | NETIF_F_HW_VLAN_CTAG_TX;
 		edma_netdev[i]->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM |
 				NETIF_F_HW_VLAN_CTAG_RX
 				| NETIF_F_SG | NETIF_F_TSO | NETIF_F_GRO;
@@ -978,20 +978,11 @@ static int edma_axi_probe(struct platform_device *pdev)
 		edma_netdev[i]->wanted_features = NETIF_F_HW_CSUM | NETIF_F_SG |
 					     NETIF_F_TSO | NETIF_F_GRO;
 
-		if (of_property_read_bool(np, "qcom,single-phy") && edma_cinfo->num_gmac == 1)
-			edma_netdev[i]->features |= NETIF_F_HW_VLAN_CTAG_TX;
-
 #ifdef CONFIG_RFS_ACCEL
-		edma_netdev[i]->features |=  NETIF_F_NTUPLE;
-		edma_netdev[i]->hw_features |=  NETIF_F_NTUPLE;
-		edma_netdev[i]->vlan_features |= NETIF_F_NTUPLE;
-		edma_netdev[i]->wanted_features |= NETIF_F_NTUPLE;
-		if (of_property_read_bool(np, "qcom,single-phy") && edma_cinfo->num_gmac == 1) {
-			edma_netdev[i]->features |= NETIF_F_RXHASH;
-			edma_netdev[i]->hw_features |= NETIF_F_RXHASH;
-			edma_netdev[i]->vlan_features |= NETIF_F_RXHASH;
-			edma_netdev[i]->wanted_features |= NETIF_F_RXHASH;
-		}
+		edma_netdev[i]->features |=  NETIF_F_NTUPLE | NETIF_F_RXHASH;
+		edma_netdev[i]->hw_features |=  NETIF_F_NTUPLE | NETIF_F_RXHASH;
+		edma_netdev[i]->vlan_features |= NETIF_F_NTUPLE | NETIF_F_RXHASH;
+		edma_netdev[i]->wanted_features |= NETIF_F_NTUPLE | NETIF_F_RXHASH;
 #endif
 		edma_set_ethtool_ops(edma_netdev[i]);
 
diff --git a/target/linux/ipq40xx/files/drivers/net/phy/ar40xx.c b/target/linux/ipq40xx/files/drivers/net/phy/ar40xx.c
index db21547a03..18ff26affc 100644
--- a/target/linux/ipq40xx/files/drivers/net/phy/ar40xx.c
+++ b/target/linux/ipq40xx/files/drivers/net/phy/ar40xx.c
@@ -1200,11 +1200,7 @@ ar40xx_init_port(struct ar40xx_priv *priv, int port)
 	ar40xx_rmw(priv, AR40XX_REG_PORT_STATUS(port),
 			AR40XX_PORT_AUTO_LINK_EN, 0);
 
-	/* CPU port is setting headers to limit output ports */
-	if (port == 0)
-		ar40xx_write(priv, AR40XX_REG_PORT_HEADER(port), 0x8);
-	else
-		ar40xx_write(priv, AR40XX_REG_PORT_HEADER(port), 0);
+	ar40xx_write(priv, AR40XX_REG_PORT_HEADER(port), 0);
 
 	ar40xx_write(priv, AR40XX_REG_PORT_VLAN0(port), 0);
 
@@ -1247,10 +1243,6 @@ ar40xx_init_globals(struct ar40xx_priv *priv)
 	t = (AR40XX_PORT0_FC_THRESH_ON_DFLT << 16) |
 	      AR40XX_PORT0_FC_THRESH_OFF_DFLT;
 	ar40xx_write(priv, AR40XX_REG_PORT_FLOWCTRL_THRESH(0), t);
-
-	/* set service tag to 802.1q */
-	t = ETH_P_8021Q | AR40XX_ESS_SERVICE_TAG_STAG;
-	ar40xx_write(priv, AR40XX_ESS_SERVICE_TAG, t);
 }
 
 static void
@@ -1576,10 +1568,7 @@ ar40xx_setup_port(struct ar40xx_priv *priv, int port, u32 members)
 	u32 pvid = priv->vlan_id[priv->pvid[port]];
 
 	if (priv->vlan) {
-		if (priv->vlan_tagged & BIT(port))
-			egress = AR40XX_PORT_VLAN1_OUT_MODE_TAG;
-		else
-			egress = AR40XX_PORT_VLAN1_OUT_MODE_UNMOD;
+		egress = AR40XX_PORT_VLAN1_OUT_MODE_UNMOD;
 
 		ingress = AR40XX_IN_SECURE;
 	} else {
@@ -1591,16 +1580,8 @@ ar40xx_setup_port(struct ar40xx_priv *priv, int port, u32 members)
 	t |= pvid << AR40XX_PORT_VLAN0_DEF_CVID_S;
 	ar40xx_write(priv, AR40XX_REG_PORT_VLAN0(port), t);
 
-	t = egress << AR40XX_PORT_VLAN1_OUT_MODE_S;
-
-	/* set CPU port to core port */
-	if (port == 0)
-		t |= AR40XX_PORT_VLAN1_CORE_PORT;
-
-	if (priv->vlan_tagged & BIT(port))
-		t |= AR40XX_PORT_VLAN1_PORT_VLAN_PROP;
-	else
-		t |= AR40XX_PORT_VLAN1_PORT_TLS_MODE;
+	t = AR40XX_PORT_VLAN1_PORT_VLAN_PROP;
+	t |= egress << AR40XX_PORT_VLAN1_OUT_MODE_S;
 
 	ar40xx_write(priv, AR40XX_REG_PORT_VLAN1(port), t);