bcm63xx: smp: add NAND support

NAND controller is present on BCM6328, BCM6362, BCM6368 and BCM63268.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

21 files changed, 816 insertions, 5 deletions

diff --git a/target/linux/bcm63xx/dts/bcm63268.dtsi b/target/linux/bcm63xx/dts/bcm63268.dtsi
index 1b4b3e6178..0c08aead20 100644
--- a/target/linux/bcm63xx/dts/bcm63268.dtsi
+++ b/target/linux/bcm63xx/dts/bcm63268.dtsi
@@ -4,6 +4,7 @@
 	compatible = "brcm,bcm63268";
 
 	aliases {
+		nflash = &nflash;
 		pinctrl = &pinctrl;
 		serial0 = &uart0;
 		serial1 = &uart1;
@@ -239,6 +240,30 @@
 			/* clocks = <&clkctl 16>; */
 		};
 
+		nflash: nand@10000200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm6368",
+				     "brcm,brcmnand-v4.0",
+				     "brcm,brcmnand";
+			reg = <0x10000200 0x180>,
+			      <0x10000600 0x200>,
+			      <0x100000b0 0x10>;
+			reg-names = "nand",
+				    "nand-cache",
+				    "nand-int-base";
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <50>;
+
+			/* clocks = <&clkctl 20>; */
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+
+			status = "disabled";
+		};
+
 		leds: led-controller@10001900 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/target/linux/bcm63xx/dts/bcm6328.dtsi b/target/linux/bcm63xx/dts/bcm6328.dtsi
index d08b6bab7a..f62fad783e 100644
--- a/target/linux/bcm63xx/dts/bcm6328.dtsi
+++ b/target/linux/bcm63xx/dts/bcm6328.dtsi
@@ -4,6 +4,7 @@
 	compatible = "brcm,bcm6328";
 
 	aliases {
+		nflash = &nflash;
 		pinctrl = &pinctrl;
 		serial0 = &uart0;
 		serial1 = &uart1;
@@ -179,6 +180,25 @@
 			status = "disabled";
 		};
 
+		nflash: nand@10000200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm6368",
+				     "brcm,brcmnand-v2.2",
+				     "brcm,brcmnand";
+			reg = <0x10000200 0x180>,
+			      <0x10000400 0x200>,
+			      <0x10000070 0x10>;
+			reg-names = "nand",
+				    "nand-cache",
+				    "nand-int-base";
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <0>;
+
+			status = "disabled";
+		};
+
 		leds: led-controller@10000800 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/target/linux/bcm63xx/dts/bcm6362.dtsi b/target/linux/bcm63xx/dts/bcm6362.dtsi
index 2ff5c52ad7..e639fc8837 100644
--- a/target/linux/bcm63xx/dts/bcm6362.dtsi
+++ b/target/linux/bcm63xx/dts/bcm6362.dtsi
@@ -4,6 +4,7 @@
 	compatible = "brcm,bcm6362";
 
 	aliases {
+		nflash = &nflash;
 		pinctrl = &pinctrl;
 		serial0 = &uart0;
 		serial1 = &uart1;
@@ -283,6 +284,30 @@
 			/* clocks = <&clkctl 16>; */
 		};
 
+		nflash: nand@10000200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm6368",
+				     "brcm,brcmnand-v2.2",
+				     "brcm,brcmnand";
+			reg = <0x10000200 0x180>,
+			      <0x10000600 0x200>,
+			      <0x10000070 0x10>;
+			reg-names = "nand",
+				    "nand-cache",
+				    "nand-int-base";
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <12>;
+
+			/* clocks = <&clkctl 20>; */
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+
+			status = "disabled";
+		};
+
 		leds: led-controller@10001900 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/target/linux/bcm63xx/dts/bcm6368.dtsi b/target/linux/bcm63xx/dts/bcm6368.dtsi
index b834f9ef0f..b539020c21 100644
--- a/target/linux/bcm63xx/dts/bcm6368.dtsi
+++ b/target/linux/bcm63xx/dts/bcm6368.dtsi
@@ -4,6 +4,7 @@
 	compatible = "brcm,bcm6368";
 
 	aliases {
+		nflash = &nflash;
 		pflash = &pflash;
 		pinctrl = &pinctrl;
 		serial0 = &uart0;
@@ -298,6 +299,27 @@
 			status = "disabled";
 		};
 
+		nflash: nand@10000200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm6368",
+				     "brcm,brcmnand-v2.1",
+				     "brcm,brcmnand";
+			reg = <0x10000200 0x180>,
+			      <0x10000600 0x200>,
+			      <0x10000070 0x10>;
+			reg-names = "nand",
+				    "nand-cache",
+				    "nand-int-base";
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <10>;
+
+			/* clocks = <&clkctl 17>; */
+
+			status = "disabled";
+		};
+
 		lsspi: spi@10000800 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/target/linux/bcm63xx/image/Makefile b/target/linux/bcm63xx/image/Makefile
index 321aec93a1..e392d99f2c 100644
--- a/target/linux/bcm63xx/image/Makefile
+++ b/target/linux/bcm63xx/image/Makefile
@@ -105,6 +105,79 @@ define Build/cfe-bin
 		$(CFE_EXTRAS) $(1)
 endef
 
+define Build/cfe-jffs2
+	$(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
+		--big-endian \
+		--pad \
+		--no-cleanmarkers \
+		--eraseblock=$(patsubst %k,%KiB,$(BLOCKSIZE)) \
+		--root=$(1) \
+		--output=$@ \
+		--compression-mode=none
+
+	$(call Build/pad-to,$(BLOCKSIZE))
+endef
+
+define Build/cfe-jffs2-cferam
+	mv $@ $@.kernel
+
+	rm -rf $@-cferam
+	mkdir -p $@-cferam
+
+	# CFE ROM checks JFFS2 dirent version of cferam.
+	# If version is not > 0 it will ignore the fs entry.
+	# JFFS2 sets version 0 to the first fs entry and increments
+	# it on the following ones, so let's create a dummy file that
+	# will have version 0 and let cferam be the second (version 1).
+	touch $@-cferam/1-openwrt
+	# Add cferam as the last file in the JFFS2 partition
+	cp $(KDIR)/bcm63xx-cfe/$(CFE_RAM_FILE) $@-cferam/$(CFE_RAM_JFFS2_NAME)
+
+	# The JFFS2 partition creation should result in the following
+	# layout:
+	# 1) 1-openwrt (version 0, ino 2)
+	# 2) cferam.000 (version 1, ino 3)
+	$(call Build/cfe-jffs2,$@-cferam)
+
+	# Some devices need padding between CFE RAM and kernel
+	$(if $(CFE_RAM_JFFS2_PAD),$(call Build/pad-to,$(CFE_RAM_JFFS2_PAD)))
+
+	# Append kernel
+	dd if=$@.kernel >> $@
+	rm -f $@.kernel
+endef
+
+define Build/cfe-jffs2-kernel
+	rm -rf $@-kernel
+	mkdir -p $@-kernel
+
+	# CFE RAM checks JFFS2 dirent version of vmlinux.
+	# If version is not > 0 it will ignore the fs entry.
+	# JFFS2 sets version 0 to the first fs entry and increments
+	# it on the following ones, so let's create a dummy file that
+	# will have version 0 and let cferam be the second (version 1).
+	touch $@-kernel/1-openwrt
+	# vmlinux is located on a different JFFS2 partition, but CFE RAM
+	# ignores it, so let's create another dummy file that will match
+	# the JFFS2 ino of cferam entry on the first JFFS2 partition.
+	# CFE RAM won't be able to find vmlinux if cferam has the same
+	# ino as vmlinux.
+	touch $@-kernel/2-openwrt
+	# Add vmlinux as the last file in the JFFS2 partition
+	$(TOPDIR)/scripts/cfe-bin-header.py \
+		--input-file $@ \
+		--output-file $@-kernel/vmlinux.lz \
+		--load-addr $(LOADER_ENTRY) \
+		--entry-addr $(LOADER_ENTRY)
+
+	# The JFFS2 partition creation should result in the following
+	# layout:
+	# 1) 1-openwrt (version 0, ino 2)
+	# 2) 2-openwrt (version 1, ino 3)
+	# 3) vmlinux.lz (version 2, ino 4)
+	$(call Build/cfe-jffs2,$@-kernel)
+endef
+
 define Build/cfe-old-bin
 	$(TOPDIR)/scripts/brcmImage.pl -t -p \
 		-o $@ -b $(CFE_BOARD_ID) -c $(CFE_CHIP_ID) \
@@ -121,6 +194,17 @@ define Build/cfe-spw303v-bin
 		$(CFE_EXTRAS) $(1)
 endef
 
+define Build/cfe-wfi-tag
+	$(TOPDIR)/scripts/cfe-wfi-tag.py \
+		--input-file $@ \
+		--output-file $@.new \
+		--version $(if $(1),$(1),$(CFE_WFI_VERSION)) \
+		--chip-id $(CFE_WFI_CHIP_ID) \
+		--flash-type $(CFE_WFI_FLASH_TYPE) \
+		$(if $(CFE_WFI_FLAGS),--flags $(CFE_WFI_FLAGS))
+	mv $@.new $@
+endef
+
 define Build/spw303v-bin
 	$(STAGING_DIR_HOST)/bin/spw303v -i $@ -o $@.spw303v
 	mv $@.spw303v $@
@@ -170,4 +254,8 @@ USB2_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
 
 include bcm63xx.mk
 
+ifeq ($(SUBTARGET),smp)
+include bcm63xx_nand.mk
+endif
+
 $(eval $(call BuildImage))
diff --git a/target/linux/bcm63xx/image/bcm63xx_nand.mk b/target/linux/bcm63xx/image/bcm63xx_nand.mk
new file mode 100644
index 0000000000..8e733f2b23
--- /dev/null
+++ b/target/linux/bcm63xx/image/bcm63xx_nand.mk
@@ -0,0 +1,35 @@
+#
+# BCM63XX NAND Profiles
+#
+
+DEVICE_VARS += CFE_RAM_FILE
+DEVICE_VARS += CFE_RAM_JFFS2_NAME CFE_RAM_JFFS2_PAD
+DEVICE_VARS += CFE_WFI_CHIP_ID CFE_WFI_FLASH_TYPE
+DEVICE_VARS += CFE_WFI_FLAGS CFE_WFI_VERSION
+
+# CFE expects a single JFFS2 partition with cferam and kernel. However,
+# it's possible to fool CFE into properly loading both cferam and kernel
+# from two different JFFS2 partitions by adding dummy files (see
+# cfe-jffs2-cferam and cfe-jffs2-kernel).
+# Separate JFFS2 partitions allow upgrading openwrt without reflashing cferam
+# JFFS2 partition, which is much safer in case anything goes wrong.
+define Device/bcm63xx-nand
+  FILESYSTEMS := squashfs ubifs
+  KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | cfe-jffs2-kernel
+  KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-lzma elf
+  IMAGES := cfe.bin sysupgrade.bin
+  IMAGE/cfe.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | cfe-jffs2-cferam | append-ubi | cfe-wfi-tag
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+  KERNEL_SIZE := 5120k
+  CFE_CHIP_ID :=
+  CFE_RAM_FILE :=
+  CFE_RAM_JFFS2_NAME :=
+  CFE_RAM_JFFS2_PAD :=
+  CFE_WFI_VERSION := 0x5731
+  CFE_WFI_CHIP_ID = 0x$$(CFE_CHIP_ID)
+  CFE_WFI_FLASH_TYPE :=
+  CFE_WFI_FLAGS :=
+  UBINIZE_OPTS := -E 5
+  DEVICE_PACKAGES += nand-utils
+  SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
+endef
diff --git a/target/linux/bcm63xx/patches-5.4/430-MIPS-BCM63XX-add-nand-clocks.patch b/target/linux/bcm63xx/patches-5.4/430-MIPS-BCM63XX-add-nand-clocks.patch
new file mode 100644
index 0000000000..883f76fe76
--- /dev/null
+++ b/target/linux/bcm63xx/patches-5.4/430-MIPS-BCM63XX-add-nand-clocks.patch
@@ -0,0 +1,50 @@
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -430,6 +430,23 @@ static struct clk clk_pcie = {
+ };
+ 
+ /*
++ * NAND clock
++ */
++static void nand_set(struct clk *clk, int enable)
++{
++	if (BCMCPU_IS_6362())
++		bcm_hwclock_set(CKCTL_6362_NAND_EN, enable);
++	else if (BCMCPU_IS_6368())
++		bcm_hwclock_set(CKCTL_6368_NAND_EN, enable);
++	else if (BCMCPU_IS_63268())
++		bcm_hwclock_set(CKCTL_63268_NAND_EN, enable);
++}
++
++static struct clk clk_nand = {
++	.set	= nand_set,
++};
++
++/*
+  * Internal peripheral clock
+  */
+ static struct clk clk_periph = {
+@@ -612,6 +629,7 @@ static struct clk_lookup bcm6362_clks[]
+ 	CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
+ 	CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll),
+ 	/* gated clocks */
++	CLKDEV_INIT(NULL, "nand", &clk_nand),
+ 	CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
+ 	CLKDEV_INIT(NULL, "usbh", &clk_usbh),
+ 	CLKDEV_INIT(NULL, "usbd", &clk_usbd),
+@@ -629,6 +647,7 @@ static struct clk_lookup bcm6368_clks[]
+ 	CLKDEV_INIT("10000100.serial", "refclk", &clk_periph),
+ 	CLKDEV_INIT("10000120.serial", "refclk", &clk_periph),
+ 	/* gated clocks */
++	CLKDEV_INIT(NULL, "nand", &clk_nand),
+ 	CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
+ 	CLKDEV_INIT(NULL, "usbh", &clk_usbh),
+ 	CLKDEV_INIT(NULL, "usbd", &clk_usbd),
+@@ -647,6 +666,7 @@ static struct clk_lookup bcm63268_clks[]
+ 	CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
+ 	CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll),
+ 	/* gated clocks */
++	CLKDEV_INIT(NULL, "nand", &clk_nand),
+ 	CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
+ 	CLKDEV_INIT(NULL, "usbh", &clk_usbh),
+ 	CLKDEV_INIT(NULL, "usbd", &clk_usbd),
diff --git a/target/linux/bcm63xx/patches-5.4/431-MIPS-BCM63XX-add-nand-rset.patch b/target/linux/bcm63xx/patches-5.4/431-MIPS-BCM63XX-add-nand-rset.patch
new file mode 100644
index 0000000000..1172b23197
--- /dev/null
+++ b/target/linux/bcm63xx/patches-5.4/431-MIPS-BCM63XX-add-nand-rset.patch
@@ -0,0 +1,145 @@
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -181,7 +181,8 @@ enum bcm63xx_regs_set {
+ 	RSET_PCMDMAC,
+ 	RSET_PCMDMAS,
+ 	RSET_RNG,
+-	RSET_MISC
++	RSET_MISC,
++	RSET_NAND
+ };
+ 
+ #define RSET_DSL_LMEM_SIZE		(64 * 1024 * 4)
+@@ -259,6 +260,7 @@ enum bcm63xx_regs_set {
+ #define BCM_3368_PCMDMAS_BASE		(0xdeadbeef)
+ #define BCM_3368_RNG_BASE		(0xdeadbeef)
+ #define BCM_3368_MISC_BASE		(0xdeadbeef)
++#define BCM_3368_NAND_BASE		(0xdeadbeef)
+ 
+ /*
+  * 6318 register sets base address
+@@ -306,6 +308,7 @@ enum bcm63xx_regs_set {
+ #define BCM_6318_PCMDMAS_BASE		(0xdeadbeef)
+ #define BCM_6318_RNG_BASE		(0xdeadbeef)
+ #define BCM_6318_MISC_BASE		(0xb0000280)
++#define BCM_6318_NAND_BASE		(0xdeadbeef)
+ #define BCM_6318_OTP_BASE		(0xdeadbeef)
+ 
+ #define BCM_6318_STRAP_BASE		(0xb0000900)
+@@ -356,6 +359,7 @@ enum bcm63xx_regs_set {
+ #define BCM_6328_PCMDMAS_BASE		(0xdeadbeef)
+ #define BCM_6328_RNG_BASE		(0xdeadbeef)
+ #define BCM_6328_MISC_BASE		(0xb0001800)
++#define BCM_6328_NAND_BASE		(0xb0000200)
+ #define BCM_6328_OTP_BASE		(0xb0000600)
+ 
+ /*
+@@ -405,6 +409,7 @@ enum bcm63xx_regs_set {
+ #define BCM_6338_PCMDMAS_BASE		(0xdeadbeef)
+ #define BCM_6338_RNG_BASE		(0xdeadbeef)
+ #define BCM_6338_MISC_BASE		(0xdeadbeef)
++#define BCM_6338_NAND_BASE		(0xdeadbeef)
+ 
+ /*
+  * 6345 register sets base address
+@@ -453,6 +458,7 @@ enum bcm63xx_regs_set {
+ #define BCM_6345_PCMDMAS_BASE		(0xdeadbeef)
+ #define BCM_6345_RNG_BASE		(0xdeadbeef)
+ #define BCM_6345_MISC_BASE		(0xdeadbeef)
++#define BCM_6345_NAND_BASE		(0xdeadbeef)
+ 
+ /*
+  * 6348 register sets base address
+@@ -499,6 +505,7 @@ enum bcm63xx_regs_set {
+ #define BCM_6348_PCMDMAS_BASE		(0xdeadbeef)
+ #define BCM_6348_RNG_BASE		(0xdeadbeef)
+ #define BCM_6348_MISC_BASE		(0xdeadbeef)
++#define BCM_6348_NAND_BASE		(0xdeadbeef)
+ 
+ /*
+  * 6358 register sets base address
+@@ -545,7 +552,7 @@ enum bcm63xx_regs_set {
+ #define BCM_6358_PCMDMAS_BASE		(0xfffe1a00)
+ #define BCM_6358_RNG_BASE		(0xdeadbeef)
+ #define BCM_6358_MISC_BASE		(0xdeadbeef)
+-
++#define BCM_6358_NAND_BASE		(0xdeadbeef)
+ 
+ /*
+  * 6362 register sets base address
+@@ -593,6 +600,7 @@ enum bcm63xx_regs_set {
+ #define BCM_6362_PCMDMAS_BASE		(0xdeadbeef)
+ #define BCM_6362_RNG_BASE		(0xdeadbeef)
+ #define BCM_6362_MISC_BASE		(0xb0001800)
++#define BCM_6362_NAND_BASE		(0xb0000200)
+ 
+ #define BCM_6362_NAND_REG_BASE		(0xb0000200)
+ #define BCM_6362_NAND_CACHE_BASE	(0xb0000600)
+@@ -648,6 +656,7 @@ enum bcm63xx_regs_set {
+ #define BCM_6368_PCMDMAS_BASE		(0xb0005c00)
+ #define BCM_6368_RNG_BASE		(0xb0004180)
+ #define BCM_6368_MISC_BASE		(0xdeadbeef)
++#define BCM_6368_NAND_BASE		(0xb0000200)
+ 
+ /*
+  * 63268 register sets base address
+@@ -695,6 +704,7 @@ enum bcm63xx_regs_set {
+ #define BCM_63268_PCMDMAS_BASE		(0xdeadbeef)
+ #define BCM_63268_RNG_BASE		(0xdeadbeef)
+ #define BCM_63268_MISC_BASE		(0xb0001800)
++#define BCM_63268_NAND_BASE		(0xb0000200)
+ 
+ extern const unsigned long *bcm63xx_regs_base;
+ 
+@@ -740,6 +750,7 @@ extern const unsigned long *bcm63xx_regs
+ 	[RSET_PCMDMAS]		= BCM_## __cpu ##_PCMDMAS_BASE,		\
+ 	[RSET_RNG]		= BCM_## __cpu ##_RNG_BASE,		\
+ 	[RSET_MISC]		= BCM_## __cpu ##_MISC_BASE,		\
++	[RSET_NAND]		= BCM_## __cpu ##_NAND_BASE,		\
+ 
+ 
+ static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set)
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
+@@ -111,5 +111,7 @@
+ #define bcm_ddr_writel(v, o)	bcm_rset_writel(RSET_DDR, (v), (o))
+ #define bcm_misc_readl(o)	bcm_rset_readl(RSET_MISC, (o))
+ #define bcm_misc_writel(v, o)	bcm_rset_writel(RSET_MISC, (v), (o))
++#define bcm_nand_readl(o)	bcm_rset_readl(RSET_NAND, (o))
++#define bcm_nand_writel(v, o)	bcm_rset_writel(RSET_NAND, (v), (o))
+ 
+ #endif /* ! BCM63XX_IO_H_ */
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -1688,4 +1688,31 @@
+ #define OTP_USER_BITS_6328_REG(i)	(0x20 + (i) * 4)
+ #define   OTP_6328_REG3_TP1_DISABLED	BIT(9)
+ 
++/*************************************************************************
++ * _REG relative to RSET_NAND
++ *************************************************************************/
++
++#define NAND_CS_SEL_REG		0x14
++#define NAND_CS_SEL_EBC_CS0_SEL	(1 << 0)
++#define NAND_CS_SEL_EBC_CS1_SEL	(1 << 1)
++#define NAND_CS_SEL_EBC_CS2_SEL	(1 << 2)
++#define NAND_CS_SEL_EBC_CS3_SEL	(1 << 3)
++#define NAND_CS_SEL_EBC_CS4_SEL	(1 << 4)
++#define NAND_CS_SEL_EBC_CS5_SEL	(1 << 5)
++#define NAND_CS_SEL_EBC_CS6_SEL	(1 << 6)
++#define NAND_CS_SEL_EBC_CS7_SEL	(1 << 7)
++#define NAND_CS_SEL_EBI_CS0_USES_NAND	(1 << 8)
++#define NAND_CS_SEL_EBI_CS1_USES_NAND	(1 << 9)
++#define NAND_CS_SEL_EBI_CS2_USES_NAND	(1 << 10)
++#define NAND_CS_SEL_EBI_CS3_USES_NAND	(1 << 11)
++#define NAND_CS_SEL_EBI_CS4_USES_NAND	(1 << 12)
++#define NAND_CS_SEL_EBI_CS5_USES_NAND	(1 << 13)
++#define NAND_CS_SEL_EBI_CS6_USES_NAND	(1 << 14)
++#define NAND_CS_SEL_EBI_CS7_USES_NAND	(1 << 15)
++#define NAND_CS_SEL_WR_PROT_BLK0	(1 << 28)
++#define NAND_CS_SEL_AUTO_DEV_ID	(1 << 30)
++#define NAND_CS_SEL_CS_LOCK		(1 << 31)
++
++#define NAND_CS_XOR_REG			0x18
++
+ #endif /* BCM63XX_REGS_H_ */
diff --git a/target/linux/bcm63xx/patches-5.4/432-MIPS-BCM63XX-detect-nand-nvram.patch b/target/linux/bcm63xx/patches-5.4/432-MIPS-BCM63XX-detect-nand-nvram.patch
new file mode 100644
index 0000000000..5a2a5f2489
--- /dev/null
+++ b/target/linux/bcm63xx/patches-5.4/432-MIPS-BCM63XX-detect-nand-nvram.patch
@@ -0,0 +1,17 @@
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -229,6 +229,14 @@ void __init bcm63xx_flash_detect(void)
+ 		}
+ 
+ 		bcm_rset_writel(RSET_HSSPI, val, HSSPI_FLASH_CTRL_REG);
++	} else if (flash_type == BCM63XX_FLASH_TYPE_NAND &&
++		   (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
++		    BCMCPU_IS_63268())) {
++		bcm_nand_writel(NAND_CS_SEL_AUTO_DEV_ID
++				| NAND_CS_SEL_EBI_CS0_USES_NAND
++				| NAND_CS_SEL_EBC_CS0_SEL,
++				NAND_CS_SEL_REG);
++		bcm_nand_writel(1, NAND_CS_XOR_REG);
+ 	}
+ }
+ 
diff --git a/target/linux/bcm63xx/patches-5.4/433-MIPS-BCM63XX-enable-nand-support.patch b/target/linux/bcm63xx/patches-5.4/433-MIPS-BCM63XX-enable-nand-support.patch
new file mode 100644
index 0000000000..7d63ee7983
--- /dev/null
+++ b/target/linux/bcm63xx/patches-5.4/433-MIPS-BCM63XX-enable-nand-support.patch
@@ -0,0 +1,17 @@
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -271,8 +271,12 @@ int __init bcm63xx_flash_register(void)
+ 			return -ENODEV;
+ 		}
+ 	case BCM63XX_FLASH_TYPE_NAND:
+-		pr_warn("unsupported NAND flash detected\n");
+-		return -ENODEV;
++		if (board_of_device_present("nflash")) {
++			return 0;
++		} else {
++			pr_warn("unsupported NAND flash detected\n");
++			return -ENODEV;
++		}
+ 	default:
+ 		pr_err("flash detection failed for BCM%x: %d\n",
+ 		       bcm63xx_get_cpu_id(), flash_type);
diff --git a/target/linux/bcm63xx/patches-5.4/434-nand-raw-use-write_oob_raw-for-MTD_OPS_AUTO_OOB-mode.patch b/target/linux/bcm63xx/patches-5.4/434-nand-raw-use-write_oob_raw-for-MTD_OPS_AUTO_OOB-mode.patch
new file mode 100644
index 0000000000..cf4322f29f
--- /dev/null
+++ b/target/linux/bcm63xx/patches-5.4/434-nand-raw-use-write_oob_raw-for-MTD_OPS_AUTO_OOB-mode.patch
@@ -0,0 +1,11 @@
+--- a/drivers/mtd/nand/raw/nand_base.c
++++ b/drivers/mtd/nand/raw/nand_base.c
+@@ -488,7 +488,7 @@ static int nand_do_write_oob(struct nand
+ 
+ 	nand_fill_oob(chip, ops->oobbuf, ops->ooblen, ops);
+ 
+-	if (ops->mode == MTD_OPS_RAW)
++	if (ops->mode == MTD_OPS_AUTO_OOB || ops->mode == MTD_OPS_RAW)
+ 		status = chip->ecc.write_oob_raw(chip, page & chip->pagemask);
+ 	else
+ 		status = chip->ecc.write_oob(chip, page & chip->pagemask);
diff --git a/target/linux/bcm63xx/patches-5.4/435-mtd-rawnand-brcmnand-correctly-verify-erased-pages.patch b/target/linux/bcm63xx/patches-5.4/435-mtd-rawnand-brcmnand-correctly-verify-erased-pages.patch
new file mode 100644
index 0000000000..cbd9e9e147
--- /dev/null
+++ b/target/linux/bcm63xx/patches-5.4/435-mtd-rawnand-brcmnand-correctly-verify-erased-pages.patch
@@ -0,0 +1,42 @@
+--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
++++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+@@ -1787,28 +1787,31 @@ static int brcmnand_read_by_pio(struct m
+ static int brcmstb_nand_verify_erased_page(struct mtd_info *mtd,
+ 		  struct nand_chip *chip, void *buf, u64 addr)
+ {
+-	int i, sas;
+-	void *oob = chip->oob_poi;
++	struct mtd_oob_region ecc;
++	int i;
+ 	int bitflips = 0;
+ 	int page = addr >> chip->page_shift;
+ 	int ret;
++	void *ecc_bytes;
+ 	void *ecc_chunk;
+ 
+ 	if (!buf)
+ 		buf = nand_get_data_buf(chip);
+ 
+-	sas = mtd->oobsize / chip->ecc.steps;
+-
+ 	/* read without ecc for verification */
+ 	ret = chip->ecc.read_page_raw(chip, buf, true, page);
+ 	if (ret)
+ 		return ret;
+ 
+-	for (i = 0; i < chip->ecc.steps; i++, oob += sas) {
++	for (i = 0; i < chip->ecc.steps; i++) {
+ 		ecc_chunk = buf + chip->ecc.size * i;
+-		ret = nand_check_erased_ecc_chunk(ecc_chunk,
+-						  chip->ecc.size,
+-						  oob, sas, NULL, 0,
++
++		mtd_ooblayout_ecc(mtd, i, &ecc);
++		ecc_bytes = chip->oob_poi + ecc.offset;
++
++		ret = nand_check_erased_ecc_chunk(ecc_chunk, chip->ecc.size,
++						  ecc_bytes, ecc.length,
++						  NULL, 0,
+ 						  chip->ecc.strength);
+ 		if (ret < 0)
+ 			return ret;
diff --git a/target/linux/bcm63xx/patches-5.4/436-mtd-rawnand-brcmnand-fix-hamming-oob-layout.patch b/target/linux/bcm63xx/patches-5.4/436-mtd-rawnand-brcmnand-fix-hamming-oob-layout.patch
new file mode 100644
index 0000000000..40536c282f
--- /dev/null
+++ b/target/linux/bcm63xx/patches-5.4/436-mtd-rawnand-brcmnand-fix-hamming-oob-layout.patch
@@ -0,0 +1,21 @@
+--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
++++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+@@ -1019,11 +1019,14 @@ static int brcmnand_hamming_ooblayout_fr
+ 		if (!section) {
+ 			/*
+ 			 * Small-page NAND use byte 6 for BBI while large-page
+-			 * NAND use byte 0.
++			 * NAND use bytes 0 and 1.
+ 			 */
+-			if (cfg->page_size > 512)
+-				oobregion->offset++;
+-			oobregion->length--;
++			if (cfg->page_size > 512) {
++				oobregion->offset += 2;
++				oobregion->length -= 2;
++			} else {
++				oobregion->length--;
++			}
+ 		}
+ 	}
+ 
diff --git a/target/linux/bcm63xx/patches-5.4/437-mtd-rawnand-brcmnand-improve-hamming-oob-layout.patch b/target/linux/bcm63xx/patches-5.4/437-mtd-rawnand-brcmnand-improve-hamming-oob-layout.patch
new file mode 100644
index 0000000000..68bbc7ad19
--- /dev/null
+++ b/target/linux/bcm63xx/patches-5.4/437-mtd-rawnand-brcmnand-improve-hamming-oob-layout.patch
@@ -0,0 +1,52 @@
+--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
++++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+@@ -1003,33 +1003,30 @@ static int brcmnand_hamming_ooblayout_fr
+ 	struct brcmnand_cfg *cfg = &host->hwcfg;
+ 	int sas = cfg->spare_area_size << cfg->sector_size_1k;
+ 	int sectors = cfg->page_size / (512 << cfg->sector_size_1k);
++	u32 next;
+ 
+-	if (section >= sectors * 2)
++	if (section > sectors)
+ 		return -ERANGE;
+ 
+-	oobregion->offset = (section / 2) * sas;
++	next = (section * sas);
++	if (section < sectors)
++		next += 6;
+ 
+-	if (section & 1) {
+-		oobregion->offset += 9;
+-		oobregion->length = 7;
++	if (section) {
++		oobregion->offset = ((section - 1) * sas) + 9;
+ 	} else {
+-		oobregion->length = 6;
+-
+-		/* First sector of each page may have BBI */
+-		if (!section) {
+-			/*
+-			 * Small-page NAND use byte 6 for BBI while large-page
+-			 * NAND use bytes 0 and 1.
+-			 */
+-			if (cfg->page_size > 512) {
+-				oobregion->offset += 2;
+-				oobregion->length -= 2;
+-			} else {
+-				oobregion->length--;
+-			}
++		if (cfg->page_size > 512) {
++			/* Large page NAND uses first 2 bytes for BBI */
++			oobregion->offset = 2;
++		} else {
++			/* Small page NAND uses last byte before ECC for BBI */
++			oobregion->offset = 0;
++			next--;
+ 		}
+ 	}
+ 
++	oobregion->length = next - oobregion->offset;
++
+ 	return 0;
+ }
+ 
diff --git a/target/linux/bcm63xx/patches-5.4/438-mtd-rawnand-brcmnand-rename-v4-registers.patch b/target/linux/bcm63xx/patches-5.4/438-mtd-rawnand-brcmnand-rename-v4-registers.patch
new file mode 100644
index 0000000000..091f63f663
--- /dev/null
+++ b/target/linux/bcm63xx/patches-5.4/438-mtd-rawnand-brcmnand-rename-v4-registers.patch
@@ -0,0 +1,24 @@
+--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
++++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+@@ -269,8 +269,8 @@ enum brcmnand_reg {
+ 	BRCMNAND_FC_BASE,
+ };
+ 
+-/* BRCMNAND v4.0 */
+-static const u16 brcmnand_regs_v40[] = {
++/* BRCMNAND v3.3-v4.0 */
++static const u16 brcmnand_regs_v33[] = {
+ 	[BRCMNAND_CMD_START]		=  0x04,
+ 	[BRCMNAND_CMD_EXT_ADDRESS]	=  0x08,
+ 	[BRCMNAND_CMD_ADDRESS]		=  0x0c,
+@@ -522,8 +522,8 @@ static int brcmnand_revision_init(struct
+ 		ctrl->reg_offsets = brcmnand_regs_v60;
+ 	else if (ctrl->nand_version >= 0x0500)
+ 		ctrl->reg_offsets = brcmnand_regs_v50;
+-	else if (ctrl->nand_version >= 0x0400)
+-		ctrl->reg_offsets = brcmnand_regs_v40;
++	else if (ctrl->nand_version >= 0x0303)
++		ctrl->reg_offsets = brcmnand_regs_v33;
+ 
+ 	/* Chip-select stride */
+ 	if (ctrl->nand_version >= 0x0701)
diff --git a/target/linux/bcm63xx/patches-5.4/439-mtd-rawnand-brcmnand-fix-CS0-layout.patch b/target/linux/bcm63xx/patches-5.4/439-mtd-rawnand-brcmnand-fix-CS0-layout.patch
new file mode 100644
index 0000000000..fdeff8734d
--- /dev/null
+++ b/target/linux/bcm63xx/patches-5.4/439-mtd-rawnand-brcmnand-fix-CS0-layout.patch
@@ -0,0 +1,14 @@
+--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
++++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+@@ -537,8 +537,9 @@ static int brcmnand_revision_init(struct
+ 	} else {
+ 		ctrl->cs_offsets = brcmnand_cs_offsets;
+ 
+-		/* v5.0 and earlier has a different CS0 offset layout */
+-		if (ctrl->nand_version <= 0x0500)
++		/* v3.3-5.0 have a different CS0 offset layout */
++		if (ctrl->nand_version >= 0x0303 &&
++		    ctrl->nand_version <= 0x0500)
+ 			ctrl->cs0_offsets = brcmnand_cs_offsets_cs0;
+ 	}
+ 
diff --git a/target/linux/bcm63xx/patches-5.4/440-mtd-rawnand-brcmnand-rename-page-sizes.patch b/target/linux/bcm63xx/patches-5.4/440-mtd-rawnand-brcmnand-rename-page-sizes.patch
new file mode 100644
index 0000000000..cdf8d3d4d6
--- /dev/null
+++ b/target/linux/bcm63xx/patches-5.4/440-mtd-rawnand-brcmnand-rename-page-sizes.patch
@@ -0,0 +1,20 @@
+--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
++++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+@@ -502,7 +502,7 @@ static int brcmnand_revision_init(struct
+ {
+ 	static const unsigned int block_sizes_v6[] = { 8, 16, 128, 256, 512, 1024, 2048, 0 };
+ 	static const unsigned int block_sizes_v4[] = { 16, 128, 8, 512, 256, 1024, 2048, 0 };
+-	static const unsigned int page_sizes[] = { 512, 2048, 4096, 8192, 0 };
++	static const unsigned int page_sizes_v3_4[] = { 512, 2048, 4096, 8192, 0 };
+ 
+ 	ctrl->nand_version = nand_readreg(ctrl, 0) & 0xffff;
+ 
+@@ -549,7 +549,7 @@ static int brcmnand_revision_init(struct
+ 		ctrl->max_page_size = 16 * 1024;
+ 		ctrl->max_block_size = 2 * 1024 * 1024;
+ 	} else {
+-		ctrl->page_sizes = page_sizes;
++		ctrl->page_sizes = page_sizes_v3_4;
+ 		if (ctrl->nand_version >= 0x0600)
+ 			ctrl->block_sizes = block_sizes_v6;
+ 		else
diff --git a/target/linux/bcm63xx/patches-5.4/441-mtd-rawnand-brcmnand-support-v2.1-v2.2-controllers.patch b/target/linux/bcm63xx/patches-5.4/441-mtd-rawnand-brcmnand-support-v2.1-v2.2-controllers.patch
new file mode 100644
index 0000000000..a212a5bda9
--- /dev/null
+++ b/target/linux/bcm63xx/patches-5.4/441-mtd-rawnand-brcmnand-support-v2.1-v2.2-controllers.patch
@@ -0,0 +1,143 @@
+--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
++++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+@@ -269,6 +269,36 @@ enum brcmnand_reg {
+ 	BRCMNAND_FC_BASE,
+ };
+ 
++/* BRCMNAND v2.1-v2.2 */
++static const u16 brcmnand_regs_v21[] = {
++	[BRCMNAND_CMD_START]		=  0x04,
++	[BRCMNAND_CMD_EXT_ADDRESS]	=  0x08,
++	[BRCMNAND_CMD_ADDRESS]		=  0x0c,
++	[BRCMNAND_INTFC_STATUS]		=  0x5c,
++	[BRCMNAND_CS_SELECT]		=  0x14,
++	[BRCMNAND_CS_XOR]		=  0x18,
++	[BRCMNAND_LL_OP]		=     0,
++	[BRCMNAND_CS0_BASE]		=  0x40,
++	[BRCMNAND_CS1_BASE]		=     0,
++	[BRCMNAND_CORR_THRESHOLD]	=     0,
++	[BRCMNAND_CORR_THRESHOLD_EXT]	=     0,
++	[BRCMNAND_UNCORR_COUNT]		=     0,
++	[BRCMNAND_CORR_COUNT]		=     0,
++	[BRCMNAND_CORR_EXT_ADDR]	=  0x60,
++	[BRCMNAND_CORR_ADDR]		=  0x64,
++	[BRCMNAND_UNCORR_EXT_ADDR]	=  0x68,
++	[BRCMNAND_UNCORR_ADDR]		=  0x6c,
++	[BRCMNAND_SEMAPHORE]		=  0x50,
++	[BRCMNAND_ID]			=  0x54,
++	[BRCMNAND_ID_EXT]		=     0,
++	[BRCMNAND_LL_RDATA]		=     0,
++	[BRCMNAND_OOB_READ_BASE]	=  0x20,
++	[BRCMNAND_OOB_READ_10_BASE]	=     0,
++	[BRCMNAND_OOB_WRITE_BASE]	=  0x30,
++	[BRCMNAND_OOB_WRITE_10_BASE]	=     0,
++	[BRCMNAND_FC_BASE]		= 0x200,
++};
++
+ /* BRCMNAND v3.3-v4.0 */
+ static const u16 brcmnand_regs_v33[] = {
+ 	[BRCMNAND_CMD_START]		=  0x04,
+@@ -502,12 +532,16 @@ static int brcmnand_revision_init(struct
+ {
+ 	static const unsigned int block_sizes_v6[] = { 8, 16, 128, 256, 512, 1024, 2048, 0 };
+ 	static const unsigned int block_sizes_v4[] = { 16, 128, 8, 512, 256, 1024, 2048, 0 };
++	static const unsigned int block_sizes_v2_2[] = { 16, 128, 8, 512, 256, 0 };
++	static const unsigned int block_sizes_v2_1[] = { 16, 128, 8, 512, 0 };
+ 	static const unsigned int page_sizes_v3_4[] = { 512, 2048, 4096, 8192, 0 };
++	static const unsigned int page_sizes_v2_2[] = { 512, 2048, 4096, 0 };
++	static const unsigned int page_sizes_v2_1[] = { 512, 2048, 0 };
+ 
+ 	ctrl->nand_version = nand_readreg(ctrl, 0) & 0xffff;
+ 
+-	/* Only support v4.0+? */
+-	if (ctrl->nand_version < 0x0400) {
++	/* Only support v2.1+ */
++	if (ctrl->nand_version < 0x0201) {
+ 		dev_err(ctrl->dev, "version %#x not supported\n",
+ 			ctrl->nand_version);
+ 		return -ENODEV;
+@@ -524,6 +558,8 @@ static int brcmnand_revision_init(struct
+ 		ctrl->reg_offsets = brcmnand_regs_v50;
+ 	else if (ctrl->nand_version >= 0x0303)
+ 		ctrl->reg_offsets = brcmnand_regs_v33;
++	else if (ctrl->nand_version >= 0x0201)
++		ctrl->reg_offsets = brcmnand_regs_v21;
+ 
+ 	/* Chip-select stride */
+ 	if (ctrl->nand_version >= 0x0701)
+@@ -549,14 +585,27 @@ static int brcmnand_revision_init(struct
+ 		ctrl->max_page_size = 16 * 1024;
+ 		ctrl->max_block_size = 2 * 1024 * 1024;
+ 	} else {
+-		ctrl->page_sizes = page_sizes_v3_4;
++		if (ctrl->nand_version >= 0x0304)
++			ctrl->page_sizes = page_sizes_v3_4;
++		else if (ctrl->nand_version >= 0x0202)
++			ctrl->page_sizes = page_sizes_v2_2;
++		else
++			ctrl->page_sizes = page_sizes_v2_1;
++
+ 		if (ctrl->nand_version >= 0x0600)
+ 			ctrl->block_sizes = block_sizes_v6;
+-		else
++		else if (ctrl->nand_version >= 0x0400)
+ 			ctrl->block_sizes = block_sizes_v4;
++		else if (ctrl->nand_version >= 0x0202)
++			ctrl->block_sizes = block_sizes_v2_2;
++		else
++			ctrl->block_sizes = block_sizes_v2_1;
+ 
+ 		if (ctrl->nand_version < 0x0400) {
+-			ctrl->max_page_size = 4096;
++			if (ctrl->nand_version < 0x0202)
++				ctrl->max_page_size = 2048;
++			else
++				ctrl->max_page_size = 4096;
+ 			ctrl->max_block_size = 512 * 1024;
+ 		}
+ 	}
+@@ -724,6 +773,9 @@ static void brcmnand_wr_corr_thresh(stru
+ 	enum brcmnand_reg reg = BRCMNAND_CORR_THRESHOLD;
+ 	int cs = host->cs;
+ 
++	if (!ctrl->reg_offsets[reg])
++		return;
++
+ 	if (ctrl->nand_version == 0x0702)
+ 		bits = 7;
+ 	else if (ctrl->nand_version >= 0x0600)
+@@ -782,8 +834,10 @@ static inline u32 brcmnand_spare_area_ma
+ 		return GENMASK(7, 0);
+ 	else if (ctrl->nand_version >= 0x0600)
+ 		return GENMASK(6, 0);
+-	else
++	else if (ctrl->nand_version >= 0x0303)
+ 		return GENMASK(5, 0);
++	else
++		return GENMASK(4, 0);
+ }
+ 
+ #define NAND_ACC_CONTROL_ECC_SHIFT	16
+@@ -2158,9 +2212,11 @@ static int brcmnand_set_cfg(struct brcmn
+ 
+ 	tmp = nand_readreg(ctrl, acc_control_offs);
+ 	tmp &= ~brcmnand_ecc_level_mask(ctrl);
+-	tmp |= cfg->ecc_level << NAND_ACC_CONTROL_ECC_SHIFT;
+ 	tmp &= ~brcmnand_spare_area_mask(ctrl);
+-	tmp |= cfg->spare_area_size;
++	if (ctrl->nand_version >= 0x0302) {
++		tmp |= cfg->ecc_level << NAND_ACC_CONTROL_ECC_SHIFT;
++		tmp |= cfg->spare_area_size;
++	}
+ 	nand_writereg(ctrl, acc_control_offs, tmp);
+ 
+ 	brcmnand_set_sector_size_1k(host, cfg->sector_size_1k);
+@@ -2524,6 +2580,8 @@ const struct dev_pm_ops brcmnand_pm_ops
+ EXPORT_SYMBOL_GPL(brcmnand_pm_ops);
+ 
+ static const struct of_device_id brcmnand_of_match[] = {
++	{ .compatible = "brcm,brcmnand-v2.1" },
++	{ .compatible = "brcm,brcmnand-v2.2" },
+ 	{ .compatible = "brcm,brcmnand-v4.0" },
+ 	{ .compatible = "brcm,brcmnand-v5.0" },
+ 	{ .compatible = "brcm,brcmnand-v6.0" },
diff --git a/target/linux/bcm63xx/patches-5.4/511-board_V2500V.patch b/target/linux/bcm63xx/patches-5.4/511-board_V2500V.patch
index e2a10846e0..47590af6e3 100644
--- a/target/linux/bcm63xx/patches-5.4/511-board_V2500V.patch
+++ b/target/linux/bcm63xx/patches-5.4/511-board_V2500V.patch
@@ -76,7 +76,7 @@
  #include <bcm63xx_cpu.h>
  #include <bcm63xx_dev_flash.h>
  #include <bcm63xx_regs.h>
-@@ -248,6 +249,13 @@ int __init bcm63xx_flash_register(void)
+@@ -256,6 +257,13 @@ int __init bcm63xx_flash_register(void)
  			val = bcm_mpi_readl(MPI_CSBASE_REG(0));
  			val &= MPI_CSBASE_BASE_MASK;
  
diff --git a/target/linux/bcm63xx/smp/config-default b/target/linux/bcm63xx/smp/config-default
index 935e97f91a..cc43bb2023 100644
--- a/target/linux/bcm63xx/smp/config-default
+++ b/target/linux/bcm63xx/smp/config-default
@@ -1,17 +1,48 @@
 CONFIG_CPU_RMAP=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_ACOMP2=y
 CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_HASH_INFO=y
 CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_LZO=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_NULL2=y
+CONFIG_CRYPTO_ZSTD=y
+CONFIG_JFFS2_FS_NAND=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MTD_NAND_BRCMNAND=y
+CONFIG_MTD_NAND_CORE=y
+CONFIG_MTD_NAND_ECC_SW_HAMMING=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_MTD_SPLIT_BCM_WFI_FW=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
+CONFIG_MTD_UBI_BLOCK=y
+# CONFIG_MTD_UBI_FASTMAP is not set
+# CONFIG_MTD_UBI_GLUEBI is not set
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
 CONFIG_NET_FLOW_LIMIT=y
 CONFIG_NR_CPUS=2
 CONFIG_PADATA=y
 CONFIG_RCU_STALL_COMMON=y
 CONFIG_RFS_ACCEL=y
 CONFIG_RPS=y
+CONFIG_SGL_ALLOC=y
 CONFIG_SMP=y
 CONFIG_SMP_UP=y
 CONFIG_TREE_RCU=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_UBIFS_FS_ZSTD=y
 CONFIG_XPS=y
+CONFIG_XXHASH=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZSTD_COMPRESS=y
+CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/bcm63xx/smp/target.mk b/target/linux/bcm63xx/smp/target.mk
index b0ccf97498..36bc2becdc 100644
--- a/target/linux/bcm63xx/smp/target.mk
+++ b/target/linux/bcm63xx/smp/target.mk
@@ -1,8 +1,17 @@
 BOARDNAME:=smp
+FEATURES+=nand
 
 define Target/Description
-	Build firmware images for BCM63XX boards with SMP support.
-	Currently only BCM6362 and BCM6368 supported.
+  Build firmware images for BCM63XX boards with SMP and NAND support.
+  SoCs with 2 cores:
+    - BCM6328 (some boards only have 1 core)
+    - BCM6358 (SMP unsupported due to shared TLB)
+    - BCM6362
+    - BCM6368
+    - BCM63268
+  SoCs with NAND controller:
+    - BCM6328 (v2.2)
+    - BCM6362 (v2.2)
+    - BCM6368 (v2.1)
+    - BCM63268 (v4.0)
 endef
-
-