aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorMauri Sandberg <sandberg@mailfence.com>2020-09-07 22:04:26 +0300
committerPetr Štetiar <ynezz@true.cz>2021-03-22 09:23:10 +0100
commitbc356de2850f14629cb1301be719772fa1212e72 (patch)
tree2aa6d0b97e6c84a42e78cf2a8923d9e009f90d78 /target/linux
parent8cc0fa8faceadac85353bb1a96e074518ef124e2 (diff)
downloadupstream-bc356de2850f14629cb1301be719772fa1212e72.tar.gz
upstream-bc356de2850f14629cb1301be719772fa1212e72.tar.bz2
upstream-bc356de2850f14629cb1301be719772fa1212e72.zip
ath79: Add support for Buffalo WZR-HP-G300NH
This device is a wireless router working on 2.4GHz band based on Qualcom/Atheros AR9132 rev 2 SoC and is accompanied by Atheros AR9103 wireless chip and Realtek RTL8366RB/S switches. Due to two different switches being used also two different devices are provided. Specification: - 400 MHz CPU - 64 MB of RAM - 32 MB of FLASH (NOR) - 3x3:2 2.4 GHz 802.11bgn - 5x 10/100/1000 Mbps Ethernet - 4x LED, 3x button, On/Off slider, Auto/On/Off slider - 1x USB 2.0 - bare UART header place on PCB Flash instruction: - NOTE: Pay attention to the switch variant and choose the image to flash accordingly. (dmesg / kernel logs can tell it) - Methods for flashing - Apply factory image in OEM firmware web-gui. - Sysupgrade on top of existing OpenWRT image - U-Boot TFPT recovery for both stock or OpenWRT images: The device U-boot contains a TFTP server that by default has an address 192.168.11.1 (MAC 02:AA:BB:CC:DD:1A). During the boot there is a time window, during which the device allows an image to be uploaded from a client with address 192.168.11.2. The image will be written on flash automatically. 1) Have a computer with static IP address 192.168.11.2 and the router device switched off. 2) Connect the LAN port next to the WAN port in the device and the computer using a network switch. 3) Assign IP 192.168.11.1 the MAC address 02:AA:BB:CC:DD:1A arp -s 192.168.11.1 02:AA:BB:CC:DD:1A 4) Initiate an upload using TFTP image variant curl -T <imagename> tftp://192.168.11.1 5) Switch on the device. The image will be uploaded subsequently. You can keep an eye on the diag light on the device, it should keep on blinking for a while indicating the writing of the image. General notes: - In the stock firmware the MAC address is the same among all interfaces so it is left here that way too. Recovery: - TFTP method - U-boot serial console Differences to ar71xx platform - This device is split in two different targets now due to hardware being a bit different under the hood. Dynamic solution within the same image is left for later time. - GPIOs for a sliding On/Off switch, marked 'Movie engine' on the device cover, were the wrong way around and were renamed qos_on -> movie_off, qos_off -> movie_on. Associated key codes remained the same they were. The device tree source code is mostly based on musashino's work Signed-off-by: Mauri Sandberg <sandberg@mailfence.com>
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ath79/dts/ar9132_buffalo_wzr-hp-g300nh-rb.dts26
-rw-r--r--target/linux/ath79/dts/ar9132_buffalo_wzr-hp-g300nh-s.dts26
-rw-r--r--target/linux/ath79/dts/ar9132_buffalo_wzr-hp-g300nh.dtsi249
-rw-r--r--target/linux/ath79/generic/base-files/etc/board.d/01_leds4
-rw-r--r--target/linux/ath79/generic/base-files/etc/board.d/02_network12
-rw-r--r--target/linux/ath79/image/generic.mk23
6 files changed, 335 insertions, 5 deletions
diff --git a/target/linux/ath79/dts/ar9132_buffalo_wzr-hp-g300nh-rb.dts b/target/linux/ath79/dts/ar9132_buffalo_wzr-hp-g300nh-rb.dts
new file mode 100644
index 0000000000..52b0c86d65
--- /dev/null
+++ b/target/linux/ath79/dts/ar9132_buffalo_wzr-hp-g300nh-rb.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9132_buffalo_wzr-hp-g300nh.dtsi"
+
+/ {
+ compatible = "buffalo,wzr-hp-g300nh-rb", "qca,ar9132";
+ model = "Buffalo WZR-HP-G300NH (rtl8366rb)";
+};
+
+&switch {
+ status = "okay";
+
+ compatible = "realtek,rtl8366rb";
+};
+
+&eth0 {
+ status = "okay";
+
+ pll-data = <0x1f000000 0x13000a44 0x00441099>;
+};
+
+&eth1 {
+ status = "okay";
+
+ pll-data = <0x100 0x13000a44 0x00441099>;
+};
diff --git a/target/linux/ath79/dts/ar9132_buffalo_wzr-hp-g300nh-s.dts b/target/linux/ath79/dts/ar9132_buffalo_wzr-hp-g300nh-s.dts
new file mode 100644
index 0000000000..1c4da1ed67
--- /dev/null
+++ b/target/linux/ath79/dts/ar9132_buffalo_wzr-hp-g300nh-s.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9132_buffalo_wzr-hp-g300nh.dtsi"
+
+/ {
+ compatible = "buffalo,wzr-hp-g300nh-s", "qca,ar9132";
+ model = "Buffalo WZR-HP-G300NH (rtl8366s)";
+};
+
+&switch {
+ status = "okay";
+
+ compatible = "realtek,rtl8366s";
+};
+
+&eth0 {
+ status = "okay";
+
+ pll-data = <0x1e000100 0x13000a44 0x00441099>;
+};
+
+&eth1 {
+ status = "okay";
+
+ pll-data = <0x1e000100 0x13000a44 0x00441099>;
+};
diff --git a/target/linux/ath79/dts/ar9132_buffalo_wzr-hp-g300nh.dtsi b/target/linux/ath79/dts/ar9132_buffalo_wzr-hp-g300nh.dtsi
new file mode 100644
index 0000000000..9bd4656d85
--- /dev/null
+++ b/target/linux/ath79/dts/ar9132_buffalo_wzr-hp-g300nh.dtsi
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9132.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_diag;
+ led-failsafe = &led_security;
+ led-upgrade = &led_diag;
+ };
+
+ clock40mhz: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <40000000>;
+ };
+
+ gpio2: gpio-extender {
+ compatible = "nxp,74hc153-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ // GPIOs used by this node
+ gpio-s0 = <&gpio 9 GPIO_ACTIVE_HIGH>;
+ gpio-s1 = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ gpio-1y = <&gpio 12 GPIO_ACTIVE_HIGH>;
+ gpio-2y = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ aoss {
+ label = "aoss";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ router_on {
+ label = "router_on";
+ linux,code = <BTN_5>;
+ gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+
+ movie_off {
+ label = "movie_off";
+ linux,code = <BTN_3>;
+ gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+
+ usb {
+ label = "usb";
+ linux,code = <BTN_2>;
+ gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ router_auto {
+ label = "router_auto";
+ linux,code = <BTN_6>;
+ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+
+ movie_on {
+ label = "movie_on";
+ linux,code = <BTN_4>;
+ gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+ };
+
+ flash@1e000000 {
+ compatible = "cfi-flash";
+ reg = <0x1e000000 0x2000000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x0040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x0040000 0x0020000>;
+ read-only;
+ };
+
+ partition@60000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x0060000 0x1f60000>;
+ };
+
+ partition@1fc0000 {
+ label = "user_property";
+ reg = <0x1fc0000 0x0020000>;
+ read-only;
+ };
+
+ art: partition@1fe0000 {
+ label = "art";
+ reg = <0x1fe0000 0x020000>;
+ read-only;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb {
+ label = "blue:usb";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port>;
+ linux,default-trigger = "usbport";
+ };
+
+ led_diag: diag {
+ label = "red:diag";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wireless {
+ label = "green:wireless";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led_security: security {
+ label = "amber:security";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ router {
+ label = "green:router";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ switch: switch {
+ status = "disabled";
+
+ gpio-sda = <&gpio 19 GPIO_ACTIVE_HIGH>;
+ gpio-sck = <&gpio 20 GPIO_ACTIVE_HIGH>;
+ mii-bus = <&mdio0>;
+
+ mdio-bus {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy-mask = <0x10>;
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+};
+
+&eth0 {
+ status = "disabled";
+
+ phy-mode = "rgmii";
+ mtd-mac-address = <&art 0x1120c>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&mdio1 {
+ status = "okay";
+};
+
+&eth1 {
+ status = "disabled";
+
+ compatible = "qca,ar9130-eth", "syscon";
+ reg = <0x1a000000 0x200
+ 0x18070004 0x4>;
+
+ pll-reg = <0x4 0x18 22>;
+ pll-handle = <&pll>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy4>;
+ resets = <&rst 13>;
+ reset-names = "mac";
+ qca,mac-idx = <1>;
+ mtd-mac-address = <&art 0x1120c>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x11000>;
+};
+
+&uart {
+ status = "okay";
+};
+
+&pll {
+ clocks = <&clock40mhz>;
+};
+
+&usb {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 31bc8f70df..783b55ec32 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -83,6 +83,10 @@ avm,fritzdvbc)
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "green:rssimediumhigh" "wlan1" "60" "100"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:rssihigh" "wlan1" "80" "100"
;;
+buffalo,wzr-hp-g300nh-rb|\
+buffalo,wzr-hp-g300nh-s)
+ ucidef_set_led_netdev "router" "Router" "green:router" "eth1"
+ ;;
comfast,cf-e110n-v2)
ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth1"
ucidef_set_led_switch "wan" "WAN" "green:wan" "switch0" "0x02"
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index aa5a336c57..e0c4f31e9d 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -155,6 +155,13 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
;;
+ buffalo,wzr-hp-g300nh-rb|\
+ buffalo,wzr-hp-g300nh-s|\
+ dlink,dir-825-b1)
+ ucidef_set_interface_wan "eth1"
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
+ ;;
buffalo,wzr-hp-g302h-a1a0)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:1" "3:lan:4" "4:lan:3" "5:lan:2" "2:wan"
@@ -211,11 +218,6 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:2" "2:lan:1"
;;
- dlink,dir-825-b1)
- ucidef_set_interface_wan "eth1"
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
- ;;
dlink,dir-825-c1|\
dlink,dir-835-a1|\
dlink,dir-842-c1|\
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index a746bcfb8e..f358d44064 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -453,6 +453,29 @@ define Device/buffalo_wzr-hp-ag300h
endef
TARGET_DEVICES += buffalo_wzr-hp-ag300h
+define Device/buffalo_wzr-hp-g300nh
+ $(Device/buffalo_common)
+ SOC := ar9132
+ BUFFALO_PRODUCT := WZR-HP-G300NH
+ BUFFALO_HWVER := 1
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-gpio-nxp-74hc153
+ BLOCKSIZE := 128k
+ IMAGE_SIZE := 32128k
+ SUPPORTED_DEVICES += wzr-hp-g300nh
+endef
+
+define Device/buffalo_wzr-hp-g300nh-rb
+ $(Device/buffalo_wzr-hp-g300nh)
+ DEVICE_MODEL := WZR-HP-G300NH (RTL8366RB switch)
+endef
+TARGET_DEVICES += buffalo_wzr-hp-g300nh-rb
+
+define Device/buffalo_wzr-hp-g300nh-s
+ $(Device/buffalo_wzr-hp-g300nh)
+ DEVICE_MODEL := WZR-HP-G300NH (RTL8366S switch)
+endef
+TARGET_DEVICES += buffalo_wzr-hp-g300nh-s
+
define Device/buffalo_wzr-hp-g302h-a1a0
$(Device/buffalo_common)
SOC := ar7242