aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorSungbo Eo <mans0n@gorani.run>2019-11-12 01:23:07 +0900
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-05-17 18:41:48 +0200
commita4e9c8f14b63cd44300ed452312c03a69aae9ca1 (patch)
tree0b3a77ff42a5e42b489913ac9e0e461a4d12c119 /target/linux
parent46674723e1a44785b7638a7a1069139312c08bc2 (diff)
downloadupstream-a4e9c8f14b63cd44300ed452312c03a69aae9ca1.tar.gz
upstream-a4e9c8f14b63cd44300ed452312c03a69aae9ca1.tar.bz2
upstream-a4e9c8f14b63cd44300ed452312c03a69aae9ca1.zip
ramips: add support for netis WF2770
netis WF2770 is a 2.4/5GHz band AC750 router, based on MediaTek MT7620A. Specifications: - SoC: MT7620A - RAM: DDR2 64MB - Flash: SPI NOR 16MB - WiFi: - 2.4GHz: SoC internal - 5GHz: MT7610EN - Ethernet: 5x 10/100/1000Mbps - Switch: MT7530BU - UART: - J2: 3.3V, RX, TX, GND (3.3V is the square pad) / 57600 8N1 MAC addresses in factory partition: 0x0004: LAN, WiFi 2.4GHz (label_mac-6) 0x0028: not used (label_mac-1) 0x002e: WAN (label_mac) 0x8004: WiFi 5GHz (label_mac+2) Installation via web interface: 1. Flash **initramfs** image through the stock web interface. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Revert to stock firmware: 1. Perform sysupgrade with stock image. Reviewed-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ramips/dts/mt7620a_netis_wf2770.dts161
-rw-r--r--target/linux/ramips/image/Makefile6
-rw-r--r--target/linux/ramips/image/mt7620.mk11
-rw-r--r--target/linux/ramips/image/mt7621.mk6
-rwxr-xr-xtarget/linux/ramips/mt7620/base-files/etc/board.d/02_network5
5 files changed, 183 insertions, 6 deletions
diff --git a/target/linux/ramips/dts/mt7620a_netis_wf2770.dts b/target/linux/ramips/dts/mt7620a_netis_wf2770.dts
new file mode 100644
index 0000000000..a0e9cfff10
--- /dev/null
+++ b/target/linux/ramips/dts/mt7620a_netis_wf2770.dts
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "netis,wf2770", "ralink,mt7620a-soc";
+ model = "NETIS WF2770";
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "wf2770:blue:wlan";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+
+ led-toggle {
+ label = "led-toggle";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_LIGHTS_TOGGLE>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "config";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "i2c", "uartf";
+ function = "gpio";
+ };
+};
+
+&ethernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &mdio_pins>;
+
+ mtd-mac-address = <&factory 0x4>;
+
+ port@5 {
+ status = "okay";
+ mediatek,fixed-link = <1000 1 1 1>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+ };
+
+ ethernet-phy@1 {
+ reg = <1>;
+ phy-mode = "rgmii";
+ };
+
+ ethernet-phy@2 {
+ reg = <2>;
+ phy-mode = "rgmii";
+ };
+
+ ethernet-phy@3 {
+ reg = <3>;
+ phy-mode = "rgmii";
+ };
+
+ ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+
+ ethernet-phy@1f {
+ reg = <0x1f>;
+ phy-mode = "rgmii";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0x0>;
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 4806226fd0..b00e6d8726 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -100,6 +100,12 @@ define Build/mkdlinkfw-factory
mv $@.new $@
endef
+define Build/netis-tail
+ echo -n $(1) >> $@
+ echo -n $(UIMAGE_NAME)-yun | $(STAGING_DIR_HOST)/bin/mkhash md5 | \
+ sed 's/../\\\\x&/g' | xargs echo -ne >> $@
+endef
+
define Build/poray-header
$(STAGING_DIR_HOST)/bin/mkporayfw $(1) -f $@ -o $@.new
mv $@.new $@
diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index 4fa8c68a88..e435b1d15f 100644
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -700,6 +700,17 @@ define Device/netgear_wn3000rp-v3
endef
TARGET_DEVICES += netgear_wn3000rp-v3
+define Device/netis_wf2770
+ SOC := mt7620a
+ IMAGE_SIZE := 16064k
+ UIMAGE_NAME := WF2770_0.0.00
+ DEVICE_VENDOR := NETIS
+ DEVICE_MODEL := WF2770
+ DEVICE_PACKAGES := kmod-mt76x0e
+ KERNEL_INITRAMFS := $(KERNEL_DTB) | netis-tail WF2770 | uImage lzma
+endef
+TARGET_DEVICES += netis_wf2770
+
define Device/nexx_wt3020-4m
SOC := mt7620n
BLOCKSIZE := 4k
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 082bb31b79..343379b764 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -81,12 +81,6 @@ define Build/iodata-mstc-header
)
endef
-define Build/netis-tail
- echo -n $(1) >> $@
- echo -n $(UIMAGE_NAME)-yun | $(STAGING_DIR_HOST)/bin/mkhash md5 | \
- sed 's/../\\\\x&/g' | xargs echo -ne >> $@
-endef
-
define Build/ubnt-erx-factory-image
if [ -e $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) -a "$$(stat -c%s $@)" -lt "$(KERNEL_SIZE)" ]; then \
echo '21001:6' > $(1).compat; \
diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
index 20932f60e9..c1dbf8d71d 100755
--- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
@@ -170,6 +170,7 @@ ramips_setup_interfaces()
"1:lan:4" "2:lan:3" "4:lan:2" "5:lan:1" "0:wan" "6@eth0"
;;
linksys,e1700|\
+ netis,wf2770|\
ralink,mt7620a-mt7530-evb)
ucidef_add_switch "switch0"
ucidef_add_switch_attr "switch0" "enable" "false"
@@ -338,6 +339,10 @@ ramips_setup_macs()
linksys,e1700)
wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
;;
+ netis,wf2770)
+ wan_mac=$(mtd_get_mac_binary factory 0x2e)
+ label_mac=$wan_mac
+ ;;
tplink,archer-c2-v1|\
tplink,archer-c20-v1|\
tplink,archer-c20i|\