aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorBirger Koblitz <git@birger-koblitz.de>2021-05-01 09:18:48 +0200
committerPetr Štetiar <ynezz@true.cz>2021-05-07 07:05:16 +0200
commit408990464c77abdb341d18346d192c0c14c9461c (patch)
tree618ff9a42bc6bdd8f029403dff53143fd46324aa /target/linux
parent515d9c85f22241b4ec08dbb3d63f6469ef412384 (diff)
downloadupstream-408990464c77abdb341d18346d192c0c14c9461c.tar.gz
upstream-408990464c77abdb341d18346d192c0c14c9461c.tar.bz2
upstream-408990464c77abdb341d18346d192c0c14c9461c.zip
realtek: Add support for clause45 PHYs
This adds support for the MMD access registers the RTL-SoCs use to access clause 45 PHYs via mdio. This new interface is used to add EEE-support for the RTL8226 Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/realtek/files-5.4/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h23
-rw-r--r--target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl838x.c73
-rw-r--r--target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl839x.c70
-rw-r--r--target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl930x.c2
-rw-r--r--target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl931x.c69
-rw-r--r--target/linux/realtek/files-5.4/drivers/net/phy/rtl83xx-phy.c560
6 files changed, 563 insertions, 234 deletions
diff --git a/target/linux/realtek/files-5.4/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h b/target/linux/realtek/files-5.4/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h
index fc401e5481..0abfc6f4d2 100644
--- a/target/linux/realtek/files-5.4/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h
+++ b/target/linux/realtek/files-5.4/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h
@@ -313,8 +313,29 @@
#define RTL839X_SMI_PORT_POLLING_CTRL (0x03fc)
#define RTL839X_PHYREG_ACCESS_CTRL (0x03DC)
#define RTL839X_PHYREG_CTRL (0x03E0)
-#define RTL839X_PHYREG_PORT_CTRL(p) (0x03E4 + ((p >> 5) << 2))
+#define RTL839X_PHYREG_PORT_CTRL (0x03E4)
#define RTL839X_PHYREG_DATA_CTRL (0x03F0)
+#define RTL839X_PHYREG_MMD_CTRL (0x3F4)
+
+#define RTL930X_SMI_GLB_CTRL (0xCA00)
+#define RTL930X_SMI_POLL_CTRL (0xca90)
+#define RTL930X_SMI_PORT0_15_POLLING_SEL (0xCA08)
+#define RTL930X_SMI_PORT16_27_POLLING_SEL (0xCA0C)
+#define RTL930X_SMI_PORT0_5_ADDR (0xCB80)
+#define RTL930X_SMI_ACCESS_PHY_CTRL_0 (0xCB70)
+#define RTL930X_SMI_ACCESS_PHY_CTRL_1 (0xCB74)
+#define RTL930X_SMI_ACCESS_PHY_CTRL_2 (0xCB78)
+#define RTL930X_SMI_ACCESS_PHY_CTRL_3 (0xCB7C)
+
+#define RTL931X_SMI_GLB_CTRL1 (0x0CBC)
+#define RTL931X_SMI_GLB_CTRL0 (0x0CC0)
+#define RTL931X_SMI_PORT_POLLING_CTRL (0x0CCC)
+#define RTL931X_SMI_INDRT_ACCESS_CTRL_0 (0x0C00)
+#define RTL931X_SMI_INDRT_ACCESS_CTRL_1 (0x0C04)
+#define RTL931X_SMI_INDRT_ACCESS_CTRL_2 (0x0C08)
+#define RTL931X_SMI_INDRT_ACCESS_CTRL_3 (0x0C10)
+#define RTL931X_SMI_INDRT_ACCESS_BC_PHYID_CTRL (0x0C14)
+#define RTL931X_SMI_INDRT_ACCESS_MMD_CTRL (0xC18)
#define RTL930X_SMI_GLB_CTRL (0xCA00)
#define RTL930X_SMI_POLL_CTRL (0xca90)
diff --git a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl838x.c b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl838x.c
index d0e5162b66..773225b3c4 100644
--- a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl838x.c
+++ b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl838x.c
@@ -513,6 +513,79 @@ timeout:
return -ETIMEDOUT;
}
+/*
+ * Read an mmd register of a PHY
+ */
+int rtl838x_read_mmd_phy(u32 port, u32 addr, u32 reg, u32 *val)
+{
+ u32 v;
+
+ mutex_lock(&smi_lock);
+
+ if (rtl838x_smi_wait_op(10000))
+ goto timeout;
+
+ sw_w32(1 << port, RTL838X_SMI_ACCESS_PHY_CTRL_0);
+ mdelay(10);
+
+ sw_w32_mask(0xffff0000, port << 16, RTL838X_SMI_ACCESS_PHY_CTRL_2);
+
+ v = addr << 16 | reg;
+ sw_w32(v, RTL838X_SMI_ACCESS_PHY_CTRL_3);
+
+ /* mmd-access | read | cmd-start */
+ v = 1 << 1 | 0 << 2 | 1;
+ sw_w32(v, RTL838X_SMI_ACCESS_PHY_CTRL_1);
+
+ if (rtl838x_smi_wait_op(10000))
+ goto timeout;
+
+ *val = sw_r32(RTL838X_SMI_ACCESS_PHY_CTRL_2) & 0xffff;
+
+ mutex_unlock(&smi_lock);
+ return 0;
+
+timeout:
+ mutex_unlock(&smi_lock);
+ return -ETIMEDOUT;
+}
+
+/*
+ * Write to an mmd register of a PHY
+ */
+int rtl838x_write_mmd_phy(u32 port, u32 addr, u32 reg, u32 val)
+{
+ u32 v;
+
+ pr_debug("MMD write: port %d, dev %d, reg %d, val %x\n", port, addr, reg, val);
+ val &= 0xffff;
+ mutex_lock(&smi_lock);
+
+ if (rtl838x_smi_wait_op(10000))
+ goto timeout;
+
+ sw_w32(1 << port, RTL838X_SMI_ACCESS_PHY_CTRL_0);
+ mdelay(10);
+
+ sw_w32_mask(0xffff0000, val << 16, RTL838X_SMI_ACCESS_PHY_CTRL_2);
+
+ sw_w32_mask(0x1f << 16, addr << 16, RTL838X_SMI_ACCESS_PHY_CTRL_3);
+ sw_w32_mask(0xffff, reg, RTL838X_SMI_ACCESS_PHY_CTRL_3);
+ /* mmd-access | write | cmd-start */
+ v = 1 << 1 | 1 << 2 | 1;
+ sw_w32(v, RTL838X_SMI_ACCESS_PHY_CTRL_1);
+
+ if (rtl838x_smi_wait_op(10000))
+ goto timeout;
+
+ mutex_unlock(&smi_lock);
+ return 0;
+
+timeout:
+ mutex_unlock(&smi_lock);
+ return -ETIMEDOUT;
+}
+
void rtl8380_get_version(struct rtl838x_switch_priv *priv)
{
u32 rw_save, info_save;
diff --git a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl839x.c b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl839x.c
index b9fdd2c955..b2846deb11 100644
--- a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl839x.c
+++ b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl839x.c
@@ -321,6 +321,7 @@ int rtl8390_sds_power(int mac, int val)
return 0;
}
+
int rtl839x_read_phy(u32 port, u32 page, u32 reg, u32 *val)
{
u32 v;
@@ -358,10 +359,9 @@ int rtl839x_write_phy(u32 port, u32 page, u32 reg, u32 val)
return -ENOTSUPP;
mutex_lock(&smi_lock);
- /* Clear both port registers */
- sw_w32(0, RTL839X_PHYREG_PORT_CTRL(0));
- sw_w32(0, RTL839X_PHYREG_PORT_CTRL(0) + 4);
- sw_w32_mask(0, BIT(port), RTL839X_PHYREG_PORT_CTRL(port));
+
+ // Set PHY to access
+ rtl839x_set_port_reg_le(BIT_ULL(port), RTL839X_PHYREG_PORT_CTRL);
sw_w32_mask(0xffff0000, val << 16, RTL839X_PHYREG_DATA_CTRL);
@@ -383,6 +383,68 @@ int rtl839x_write_phy(u32 port, u32 page, u32 reg, u32 val)
return err;
}
+/*
+ * Read an mmd register of the PHY
+ */
+int rtl839x_read_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 *val)
+{
+ int err = 0;
+ u32 v;
+
+ mutex_lock(&smi_lock);
+
+ // Set PHY to access
+ sw_w32_mask(0xffff << 16, port << 16, RTL839X_PHYREG_DATA_CTRL);
+
+ // Set MMD device number and register to write to
+ sw_w32(devnum << 16 | (regnum & 0xffff), RTL839X_PHYREG_MMD_CTRL);
+
+ v = BIT(2) | BIT(0); // MMD-access | EXEC
+ sw_w32(v, RTL839X_PHYREG_ACCESS_CTRL);
+
+ do {
+ v = sw_r32(RTL839X_PHYREG_ACCESS_CTRL);
+ } while (v & BIT(0));
+ // There is no error-checking via BIT 1 of v, as it does not seem to be set correctly
+ *val = (sw_r32(RTL839X_PHYREG_DATA_CTRL) & 0xffff);
+ pr_debug("%s: port %d, regnum: %x, val: %x (err %d)\n", __func__, port, regnum, *val, err);
+
+ mutex_unlock(&smi_lock);
+
+ return err;
+}
+
+/*
+ * Write to an mmd register of the PHY
+ */
+int rtl839x_write_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 val)
+{
+ int err = 0;
+ u32 v;
+
+ mutex_lock(&smi_lock);
+
+ // Set PHY to access
+ rtl839x_set_port_reg_le(BIT_ULL(port), RTL839X_PHYREG_PORT_CTRL);
+
+ // Set data to write
+ sw_w32_mask(0xffff << 16, val << 16, RTL839X_PHYREG_DATA_CTRL);
+
+ // Set MMD device number and register to write to
+ sw_w32(devnum << 16 | (regnum & 0xffff), RTL839X_PHYREG_MMD_CTRL);
+
+ v = BIT(3) | BIT(2) | BIT(0); // WRITE | MMD-access | EXEC
+ sw_w32(v, RTL839X_PHYREG_ACCESS_CTRL);
+
+ do {
+ v = sw_r32(RTL839X_PHYREG_ACCESS_CTRL);
+ } while (v & BIT(0));
+
+ pr_debug("%s: port %d, regnum: %x, val: %x (err %d)\n", __func__, port, regnum, val, err);
+ mutex_unlock(&smi_lock);
+ return err;
+}
+
void rtl8390_get_version(struct rtl838x_switch_priv *priv)
{
u32 info;
diff --git a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl930x.c b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl930x.c
index 6c2fde1040..4214c7694d 100644
--- a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl930x.c
+++ b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl930x.c
@@ -382,7 +382,6 @@ int rtl9300_sds_power(int mac, int val)
return 0;
}
-
int rtl930x_write_phy(u32 port, u32 page, u32 reg, u32 val)
{
u32 v;
@@ -445,7 +444,6 @@ int rtl930x_read_phy(u32 port, u32 page, u32 reg, u32 *val)
return err;
}
-
/*
* Write to an mmd register of the PHY
*/
diff --git a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl931x.c b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl931x.c
index a33941a0eb..f98bf7df29 100644
--- a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl931x.c
+++ b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl931x.c
@@ -175,6 +175,7 @@ static u64 rtl931x_read_cam(int idx, struct rtl838x_l2_entry *e)
// TODO: Implement
return entry;
}
+
irqreturn_t rtl931x_switch_irq(int irq, void *dev_id)
{
struct dsa_switch *ds = dev_id;
@@ -199,7 +200,6 @@ irqreturn_t rtl931x_switch_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
-
int rtl931x_write_phy(u32 port, u32 page, u32 reg, u32 val)
{
u32 v;
@@ -264,6 +264,73 @@ int rtl931x_read_phy(u32 port, u32 page, u32 reg, u32 *val)
return 0;
}
+/*
+ * Read an mmd register of the PHY
+ */
+int rtl931x_read_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 *val)
+{
+ int err = 0;
+ u32 v;
+ int type = 1; // TODO: For C45 PHYs need to set to 2
+
+ mutex_lock(&smi_lock);
+
+ // Set PHY to access via port-number
+ sw_w32(port << 5, RTL931X_SMI_INDRT_ACCESS_BC_PHYID_CTRL);
+
+ // Set MMD device number and register to write to
+ sw_w32(devnum << 16 | (regnum & 0xffff), RTL931X_SMI_INDRT_ACCESS_MMD_CTRL);
+
+ v = type << 2 | BIT(0); // MMD-access-type | EXEC
+ sw_w32(v, RTL931X_SMI_INDRT_ACCESS_CTRL_0);
+
+ do {
+ v = sw_r32(RTL931X_SMI_INDRT_ACCESS_CTRL_0);
+ } while (v & BIT(0));
+
+ // There is no error-checking via BIT 1 of v, as it does not seem to be set correctly
+
+ *val = (sw_r32(RTL931X_SMI_INDRT_ACCESS_CTRL_3) & 0xffff);
+
+ pr_debug("%s: port %d, regnum: %x, val: %x (err %d)\n", __func__, port, regnum, *val, err);
+
+ mutex_unlock(&smi_lock);
+
+ return err;
+}
+
+/*
+ * Write to an mmd register of the PHY
+ */
+int rtl931x_write_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 val)
+{
+ int err = 0;
+ u32 v;
+ int type = 1; // TODO: For C45 PHYs need to set to 2
+
+ mutex_lock(&smi_lock);
+
+ // Set PHY to access via port-number
+ sw_w32(port << 5, RTL931X_SMI_INDRT_ACCESS_BC_PHYID_CTRL);
+
+ // Set data to write
+ sw_w32_mask(0xffff << 16, val << 16, RTL931X_SMI_INDRT_ACCESS_CTRL_3);
+
+ // Set MMD device number and register to write to
+ sw_w32(devnum << 16 | (regnum & 0xffff), RTL931X_SMI_INDRT_ACCESS_MMD_CTRL);
+
+ v = BIT(4) | type << 2 | BIT(0); // WRITE | MMD-access-type | EXEC
+ sw_w32(v, RTL931X_SMI_INDRT_ACCESS_CTRL_0);
+
+ do {
+ v = sw_r32(RTL931X_SMI_INDRT_ACCESS_CTRL_0);
+ } while (v & BIT(0));
+
+ pr_debug("%s: port %d, regnum: %x, val: %x (err %d)\n", __func__, port, regnum, val, err);
+ mutex_unlock(&smi_lock);
+ return err;
+}
+
void rtl931x_print_matrix(void)
{
volatile u64 *ptr = RTL838X_SW_BASE + RTL839X_PORT_ISO_CTRL(0);
diff --git a/target/linux/realtek/files-5.4/drivers/net/phy/rtl83xx-phy.c b/target/linux/realtek/files-5.4/drivers/net/phy/rtl83xx-phy.c
index 78953c6d17..3e187228a9 100644
--- a/target/linux/realtek/files-5.4/drivers/net/phy/rtl83xx-phy.c
+++ b/target/linux/realtek/files-5.4/drivers/net/phy/rtl83xx-phy.c
@@ -18,12 +18,26 @@
extern struct rtl83xx_soc_info soc_info;
extern struct mutex smi_lock;
+/*
+ * This lock protects the state of the SoC automatically polling the PHYs over the SMI
+ * bus to detect e.g. link and media changes. For operations on the PHYs such as
+ * patching or other configuration changes such as EEE, polling needs to be disabled
+ * since otherwise these operations may fails or lead to unpredictable results.
+ */
+DEFINE_MUTEX(poll_lock);
+
static const struct firmware rtl838x_8380_fw;
static const struct firmware rtl838x_8214fc_fw;
static const struct firmware rtl838x_8218b_fw;
+int rtl838x_read_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 *val);
+int rtl838x_write_mmd_phy(u32 port, u32 devnum, u32 reg, u32 val);
+int rtl839x_read_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 *val);
+int rtl839x_write_mmd_phy(u32 port, u32 devnum, u32 reg, u32 val);
int rtl930x_read_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 *val);
-int rtl930x_write_mmd_phy(u32 port, u32 addr, u32 reg, u32 val);
+int rtl930x_write_mmd_phy(u32 port, u32 devnum, u32 reg, u32 val);
+int rtl931x_read_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 *val);
+int rtl931x_write_mmd_phy(u32 port, u32 devnum, u32 reg, u32 val);
static int read_phy(u32 port, u32 page, u32 reg, u32 *val)
{ switch (soc_info.family) {
@@ -54,6 +68,93 @@ static int write_phy(u32 port, u32 page, u32 reg, u32 val)
return -1;
}
+static int read_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 *val)
+{
+ switch (soc_info.family) {
+ case RTL8380_FAMILY_ID:
+ return rtl838x_read_mmd_phy(port, devnum, regnum, val);
+ case RTL8390_FAMILY_ID:
+ return rtl839x_read_mmd_phy(port, devnum, regnum, val);
+ case RTL9300_FAMILY_ID:
+ return rtl930x_read_mmd_phy(port, devnum, regnum, val);
+ case RTL9310_FAMILY_ID:
+ return rtl931x_read_mmd_phy(port, devnum, regnum, val);
+ }
+ return -1;
+}
+
+int write_mmd_phy(u32 port, u32 devnum, u32 reg, u32 val)
+{
+ switch (soc_info.family) {
+ case RTL8380_FAMILY_ID:
+ return rtl838x_write_mmd_phy(port, devnum, reg, val);
+ case RTL8390_FAMILY_ID:
+ return rtl839x_write_mmd_phy(port, devnum, reg, val);
+ case RTL9300_FAMILY_ID:
+ return rtl930x_write_mmd_phy(port, devnum, reg, val);
+ case RTL9310_FAMILY_ID:
+ return rtl931x_write_mmd_phy(port, devnum, reg, val);
+ }
+ return -1;
+}
+
+static u64 disable_polling(int port)
+{
+ u64 saved_state;
+
+ mutex_lock(&poll_lock);
+
+ switch (soc_info.family) {
+ case RTL8380_FAMILY_ID:
+ saved_state = sw_r32(RTL838X_SMI_POLL_CTRL);
+ sw_w32_mask(BIT(port), 0, RTL838X_SMI_POLL_CTRL);
+ break;
+ case RTL8390_FAMILY_ID:
+ saved_state = sw_r32(RTL839X_SMI_PORT_POLLING_CTRL + 4);
+ saved_state <<= 32;
+ saved_state |= sw_r32(RTL839X_SMI_PORT_POLLING_CTRL);
+ sw_w32_mask(BIT(port % 32), 0,
+ RTL839X_SMI_PORT_POLLING_CTRL + ((port >> 5) << 2));
+ break;
+ case RTL9300_FAMILY_ID:
+ saved_state = sw_r32(RTL930X_SMI_POLL_CTRL);
+ sw_w32_mask(BIT(port), 0, RTL930X_SMI_POLL_CTRL);
+ break;
+ case RTL9310_FAMILY_ID:
+ pr_warn("%s not implemented for RTL931X\n", __func__);
+ break;
+ }
+
+ mutex_unlock(&poll_lock);
+
+ return saved_state;
+}
+
+static int resume_polling(u64 saved_state)
+{
+ mutex_lock(&poll_lock);
+
+ switch (soc_info.family) {
+ case RTL8380_FAMILY_ID:
+ sw_w32(saved_state, RTL838X_SMI_POLL_CTRL);
+ break;
+ case RTL8390_FAMILY_ID:
+ sw_w32(saved_state >> 32, RTL839X_SMI_PORT_POLLING_CTRL + 4);
+ sw_w32(saved_state, RTL839X_SMI_PORT_POLLING_CTRL);
+ break;
+ case RTL9300_FAMILY_ID:
+ sw_w32(saved_state, RTL930X_SMI_POLL_CTRL);
+ break;
+ case RTL9310_FAMILY_ID:
+ pr_warn("%s not implemented for RTL931X\n", __func__);
+ break;
+ }
+
+ mutex_unlock(&poll_lock);
+
+ return 0;
+}
+
static void rtl8380_int_phy_on_off(int mac, bool on)
{
u32 val;
@@ -94,18 +195,6 @@ static void rtl8380_phy_reset(int mac)
write_phy(mac, 0, 0, val | BIT(15));
}
-static void rtl8380_sds_rst(int mac)
-{
- u32 offset = (mac == 24) ? 0 : 0x100;
-
- sw_w32_mask(1 << 11, 0, RTL8380_SDS4_FIB_REG0 + offset);
- sw_w32_mask(0x3, 0, RTL838X_SDS4_REG28 + offset);
- sw_w32_mask(0x3, 0x3, RTL838X_SDS4_REG28 + offset);
- sw_w32_mask(0, 0x1 << 6, RTL838X_SDS4_DUMMY0 + offset);
- sw_w32_mask(0x1 << 6, 0, RTL838X_SDS4_DUMMY0 + offset);
- pr_info("SERDES reset: %d\n", mac);
-}
-
/*
* Reset the SerDes by powering it off and set a new operations mode
* of the SerDes. 0x1f is off. Other modes are
@@ -307,6 +396,7 @@ static int rtl8393_read_status(struct phy_device *phydev)
return err;
}
+
static int rtl8226_read_page(struct phy_device *phydev)
{
return __phy_read(phydev, 0x1f);
@@ -331,20 +421,20 @@ static int rtl8226_read_status(struct phy_device *phydev)
// Link status must be read twice
for (i = 0; i < 2; i++) {
- rtl930x_read_mmd_phy(port, MMD_VEND2, 0xA402, &val);
+ read_mmd_phy(port, MMD_VEND2, 0xA402, &val);
}
phydev->link = val & BIT(2) ? 1 : 0;
if (!phydev->link)
goto out;
// Read duplex status
- ret = rtl930x_read_mmd_phy(port, MMD_VEND2, 0xA434, &val);
+ ret = read_mmd_phy(port, MMD_VEND2, 0xA434, &val);
if (ret)
goto out;
phydev->duplex = !!(val & BIT(3));
// Read speed
- ret = rtl930x_read_mmd_phy(port, MMD_VEND2, 0xA434, &val);
+ ret = read_mmd_phy(port, MMD_VEND2, 0xA434, &val);
switch (val & 0x0630) {
case 0x0000:
phydev->speed = SPEED_10;
@@ -371,7 +461,7 @@ out:
return ret;
}
-static int rtl8266_advertise_aneg(struct phy_device *phydev)
+static int rtl8226_advertise_aneg(struct phy_device *phydev)
{
int ret = 0;
u32 v;
@@ -379,7 +469,7 @@ static int rtl8266_advertise_aneg(struct phy_device *phydev)
pr_info("In %s\n", __func__);
- ret = rtl930x_read_mmd_phy(port, MMD_AN, 16, &v);
+ ret = read_mmd_phy(port, MMD_AN, 16, &v);
if (ret)
goto out;
@@ -388,31 +478,30 @@ static int rtl8266_advertise_aneg(struct phy_device *phydev)
v |= BIT(7); // HD 100M
v |= BIT(8); // FD 100M
- ret = rtl930x_write_mmd_phy(port, MMD_AN, 16, v);
+ ret = write_mmd_phy(port, MMD_AN, 16, v);
// Allow 1GBit
- ret = rtl930x_read_mmd_phy(port, MMD_VEND2, 0xA412, &v);
+ ret = read_mmd_phy(port, MMD_VEND2, 0xA412, &v);
if (ret)
goto out;
v |= BIT(9); // FD 1000M
- ret = rtl930x_write_mmd_phy(port, MMD_VEND2, 0xA412, v);
+ ret = write_mmd_phy(port, MMD_VEND2, 0xA412, v);
if (ret)
goto out;
// Allow 2.5G
- ret = rtl930x_read_mmd_phy(port, MMD_AN, 32, &v);
+ ret = read_mmd_phy(port, MMD_AN, 32, &v);
if (ret)
goto out;
v |= BIT(7);
- ret = rtl930x_write_mmd_phy(port, MMD_AN, 32, v);
+ ret = write_mmd_phy(port, MMD_AN, 32, v);
out:
return ret;
}
-
static int rtl8226_config_aneg(struct phy_device *phydev)
{
int ret = 0;
@@ -421,26 +510,26 @@ static int rtl8226_config_aneg(struct phy_device *phydev)
pr_info("In %s\n", __func__);
if (phydev->autoneg == AUTONEG_ENABLE) {
- ret = rtl8266_advertise_aneg(phydev);
+ ret = rtl8226_advertise_aneg(phydev);
if (ret)
goto out;
// AutoNegotiationEnable
- ret = rtl930x_read_mmd_phy(port, MMD_AN, 0, &v);
+ ret = read_mmd_phy(port, MMD_AN, 0, &v);
if (ret)
goto out;
v |= BIT(12); // Enable AN
- ret = rtl930x_write_mmd_phy(port, MMD_AN, 0, v);
+ ret = write_mmd_phy(port, MMD_AN, 0, v);
if (ret)
goto out;
// RestartAutoNegotiation
- ret = rtl930x_read_mmd_phy(port, MMD_VEND2, 0xA400, &v);
+ ret = read_mmd_phy(port, MMD_VEND2, 0xA400, &v);
if (ret)
goto out;
v |= BIT(9);
- ret = rtl930x_write_mmd_phy(port, MMD_VEND2, 0xA400, v);
+ ret = write_mmd_phy(port, MMD_VEND2, 0xA400, v);
}
pr_info("%s: Ret is already: %d\n", __func__, ret);
@@ -451,6 +540,68 @@ out:
return ret;
}
+static int rtl8226_get_eee(struct phy_device *phydev,
+ struct ethtool_eee *e)
+{
+ u32 val;
+ int addr = phydev->mdio.addr;
+
+ pr_debug("In %s, port %d, was enabled: %d\n", __func__, addr, e->eee_enabled);
+
+ read_mmd_phy(addr, MMD_AN, 60, &val);
+ if (e->eee_enabled) {
+ e->eee_enabled = !!(val & BIT(1));
+ if (!e->eee_enabled) {
+ read_mmd_phy(addr, MMD_AN, 62, &val);
+ e->eee_enabled = !!(val & BIT(0));
+ }
+ }
+ pr_debug("%s: enabled: %d\n", __func__, e->eee_enabled);
+
+ return 0;
+}
+
+static int rtl8226_set_eee(struct phy_device *phydev, struct ethtool_eee *e)
+{
+ int port = phydev->mdio.addr;
+ u64 poll_state;
+ bool an_enabled;
+ u32 val;
+
+ pr_info("In %s, port %d, enabled %d\n", __func__, port, e->eee_enabled);
+
+ poll_state = disable_polling(port);
+
+ // Remember aneg state
+ read_mmd_phy(port, MMD_AN, 0, &val);
+ an_enabled = !!(val & BIT(12));
+
+ // Setup 100/1000MBit
+ read_mmd_phy(port, MMD_AN, 60, &val);
+ if (e->eee_enabled)
+ val |= 0x6;
+ else
+ val &= 0x6;
+ write_mmd_phy(port, MMD_AN, 60, val);
+
+ // Setup 2.5GBit
+ read_mmd_phy(port, MMD_AN, 62, &val);
+ if (e->eee_enabled)
+ val |= 0x1;
+ else
+ val &= 0x1;
+ write_mmd_phy(port, MMD_AN, 62, val);
+
+ // RestartAutoNegotiation
+ read_mmd_phy(port, MMD_VEND2, 0xA400, &val);
+ val |= BIT(9);
+ write_mmd_phy(port, MMD_VEND2, 0xA400, val);
+
+ resume_polling(poll_state);
+
+ return 0;
+}
+
static struct fw_header *rtl838x_request_fw(struct phy_device *phydev,
const struct firmware *fw,
const char *name)
@@ -750,79 +901,6 @@ static int rtl8218b_ext_match_phy_device(struct phy_device *phydev)
return phydev->phy_id == PHY_ID_RTL8218B_E;
}
-/*
- * Read an mmd register of the PHY
- */
-static int rtl83xx_read_mmd_phy(u32 port, u32 addr, u32 reg, u32 *val)
-{
- u32 v;
-
- mutex_lock(&smi_lock);
-
- if (rtl838x_smi_wait_op(10000))
- goto timeout;
-
- sw_w32(1 << port, RTL838X_SMI_ACCESS_PHY_CTRL_0);
- mdelay(10);
-
- sw_w32_mask(0xffff0000, port << 16, RTL838X_SMI_ACCESS_PHY_CTRL_2);
-
- v = addr << 16 | reg;
- sw_w32(v, RTL838X_SMI_ACCESS_PHY_CTRL_3);
-
- /* mmd-access | read | cmd-start */
- v = 1 << 1 | 0 << 2 | 1;
- sw_w32(v, RTL838X_SMI_ACCESS_PHY_CTRL_1);
-
- if (rtl838x_smi_wait_op(10000))
- goto timeout;
-
- *val = sw_r32(RTL838X_SMI_ACCESS_PHY_CTRL_2) & 0xffff;
-
- mutex_unlock(&smi_lock);
- return 0;
-
-timeout:
- mutex_unlock(&smi_lock);
- return -ETIMEDOUT;
-}
-
-/*
- * Write to an mmd register of the PHY
- */
-static int rtl838x_write_mmd_phy(u32 port, u32 addr, u32 reg, u32 val)
-{
- u32 v;
-
- pr_debug("MMD write: port %d, dev %d, reg %d, val %x\n", port, addr, reg, val);
- val &= 0xffff;
- mutex_lock(&smi_lock);
-
- if (rtl838x_smi_wait_op(10000))
- goto timeout;
-
- sw_w32(1 << port, RTL838X_SMI_ACCESS_PHY_CTRL_0);
- mdelay(10);
-
- sw_w32_mask(0xffff0000, val << 16, RTL838X_SMI_ACCESS_PHY_CTRL_2);
-
- sw_w32_mask(0x1f << 16, addr << 16, RTL838X_SMI_ACCESS_PHY_CTRL_3);
- sw_w32_mask(0xffff, reg, RTL838X_SMI_ACCESS_PHY_CTRL_3);
- /* mmd-access | write | cmd-start */
- v = 1 << 1 | 1 << 2 | 1;
- sw_w32(v, RTL838X_SMI_ACCESS_PHY_CTRL_1);
-
- if (rtl838x_smi_wait_op(10000))
- goto timeout;
-
- mutex_unlock(&smi_lock);
- return 0;
-
-timeout:
- mutex_unlock(&smi_lock);
- return -ETIMEDOUT;
-}
-
static int rtl8218b_read_mmd(struct phy_device *phydev,
int devnum, u16 regnum)
{
@@ -830,7 +908,7 @@ static int rtl8218b_read_mmd(struct phy_device *phydev,
u32 val;
int addr = phydev->mdio.addr;
- ret = rtl83xx_read_mmd_phy(addr, devnum, regnum, &val);
+ ret = read_mmd_phy(addr, devnum, regnum, &val);
if (ret)
return ret;
return val;
@@ -850,8 +928,7 @@ static int rtl8226_read_mmd(struct phy_device *phydev, int devnum, u16 regnum)
int err;
u32 val;
- err = rtl930x_read_mmd_phy(port, devnum, regnum, &val);
-
+ err = read_mmd_phy(port, devnum, regnum, &val);
if (err)
return err;
return val;
@@ -861,7 +938,7 @@ static int rtl8226_write_mmd(struct phy_device *phydev, int devnum, u16 regnum,
{
int port = phydev->mdio.addr; // the SoC translates port addresses to PHY addr
- return rtl930x_write_mmd_phy(port, devnum, regnum, val);
+ return write_mmd_phy(port, devnum, regnum, val);
}
static void rtl8380_rtl8214fc_media_set(int mac, bool set_fibre)
@@ -957,90 +1034,46 @@ static int rtl8214fc_get_port(struct phy_device *phydev)
return PORT_MII;
}
-static void rtl8218b_eee_set_u_boot(int port, bool enable)
-{
- u32 val;
- bool an_enabled;
-
- /* Set GPHY page to copper */
- write_phy(port, 0, 30, 0x0001);
- read_phy(port, 0, 0, &val);
- an_enabled = val & (1 << 12);
-
- if (enable) {
- /* 100/1000M EEE Capability */
- write_phy(port, 0, 13, 0x0007);
- write_phy(port, 0, 14, 0x003C);
- write_phy(port, 0, 13, 0x4007);
- write_phy(port, 0, 14, 0x0006);
-
- read_phy(port, 0x0A43, 25, &val);
- val |= 1 << 4;
- write_phy(port, 0x0A43, 25, val);
- } else {
- /* 100/1000M EEE Capability */
- write_phy(port, 0, 13, 0x0007);
- write_phy(port, 0, 14, 0x003C);
- write_phy(port, 0, 13, 0x0007);
- write_phy(port, 0, 14, 0x0000);
-
- read_phy(port, 0x0A43, 25, &val);
- val &= ~(1 << 4);
- write_phy(port, 0x0A43, 25, val);
- }
-
- /* Restart AN if enabled */
- if (an_enabled) {
- read_phy(port, 0, 0, &val);
- val |= (1 << 12) | (1 << 9);
- write_phy(port, 0, 0, val);
- }
-
- /* GPHY page back to auto*/
- write_phy(port, 0xa42, 29, 0);
-}
-
-// TODO: unused
-void rtl8380_rtl8218b_eee_set(int port, bool enable)
+/*
+ * Enable EEE on the RTL8218B PHYs
+ * The method used is not the preferred way (which would be based on the MAC-EEE state,
+ * but the only way that works since the kernel first enables EEE in the MAC
+ * and then sets up the PHY. The MAC-based approach would require the oppsite.
+ */
+void rtl8218d_eee_set(int port, bool enable)
{
u32 val;
bool an_enabled;
pr_debug("In %s %d, enable %d\n", __func__, port, enable);
/* Set GPHY page to copper */
- write_phy(port, 0xa42, 29, 0x0001);
+ write_phy(port, 0xa42, 30, 0x0001);
read_phy(port, 0, 0, &val);
- an_enabled = val & (1 << 12);
+ an_enabled = val & BIT(12);
- /* MAC based EEE */
- read_phy(port, 0xa43, 25, &val);
- val &= ~(1 << 5);
- write_phy(port, 0xa43, 25, val);
-
- /* 100M / 1000M EEE */
- if (enable)
- rtl838x_write_mmd_phy(port, 7, 60, 0x6);
- else
- rtl838x_write_mmd_phy(port, 7, 60, 0);
+ /* Enable 100M (bit 1) / 1000M (bit 2) EEE */
+ read_mmd_phy(port, 7, 60, &val);
+ val |= BIT(2) | BIT(1);
+ write_mmd_phy(port, 7, 60, enable ? 0x6 : 0);
/* 500M EEE ability */
read_phy(port, 0xa42, 20, &val);
if (enable)
- val |= 1 << 7;
+ val |= BIT(7);
else
- val &= ~(1 << 7);
+ val &= ~BIT(7);
write_phy(port, 0xa42, 20, val);
/* Restart AN if enabled */
if (an_enabled) {
read_phy(port, 0, 0, &val);
- val |= (1 << 12) | (1 << 9);
+ val |= BIT(9);
write_phy(port, 0, 0, val);
}
/* GPHY page back to auto*/
- write_phy(port, 0xa42, 29, 0);
+ write_phy(port, 0xa42, 30, 0);
}
static int rtl8218b_get_eee(struct phy_device *phydev,
@@ -1049,16 +1082,21 @@ static int rtl8218b_get_eee(struct phy_device *phydev,
u32 val;
int addr = phydev->mdio.addr;
- pr_debug("In %s, port %d\n", __func__, addr);
+ pr_debug("In %s, port %d, was enabled: %d\n", __func__, addr, e->eee_enabled);
/* Set GPHY page to copper */
write_phy(addr, 0xa42, 29, 0x0001);
- rtl83xx_read_mmd_phy(addr, 7, 60, &val);
- if (e->eee_enabled && (!!(val & (1 << 7))))
- e->eee_enabled = !!(val & (1 << 7));
- else
- e->eee_enabled = 0;
+ read_phy(addr, 7, 60, &val);
+ if (e->eee_enabled) {
+ // Verify vs MAC-based EEE
+ e->eee_enabled = !!(val & BIT(7));
+ if (!e->eee_enabled) {
+ read_phy(addr, 0x0A43, 25, &val);
+ e->eee_enabled = !!(val & BIT(4));
+ }
+ }
+ pr_debug("%s: enabled: %d\n", __func__, e->eee_enabled);
/* GPHY page to auto */
write_phy(addr, 0xa42, 29, 0x0000);
@@ -1066,49 +1104,24 @@ static int rtl8218b_get_eee(struct phy_device *phydev,
return 0;
}
-// TODO: unused
-void rtl8380_rtl8218b_green_set(int mac, bool enable)
-{
- u32 val;
-
- /* Set GPHY page to copper */
- write_phy(mac, 0xa42, 29, 0x0001);
-
- write_phy(mac, 0, 27, 0x8011);
- read_phy(mac, 0, 28, &val);
- if (enable) {
- val |= 1 << 9;
- write_phy(mac, 0, 27, 0x8011);
- write_phy(mac, 0, 28, val);
- } else {
- val &= ~(1 << 9);
- write_phy(mac, 0, 27, 0x8011);
- write_phy(mac, 0, 28, val);
- }
-
- /* GPHY page to auto */
- write_phy(mac, 0xa42, 29, 0x0000);
-}
-
-// TODO: unused
-int rtl8380_rtl8214fc_get_green(struct phy_device *phydev, struct ethtool_eee *e)
+static int rtl8218d_get_eee(struct phy_device *phydev,
+ struct ethtool_eee *e)
{
u32 val;
int addr = phydev->mdio.addr;
- pr_debug("In %s %d\n", __func__, addr);
+ pr_debug("In %s, port %d, was enabled: %d\n", __func__, addr, e->eee_enabled);
+
/* Set GPHY page to copper */
- write_phy(addr, 0xa42, 29, 0x0001);
+ write_phy(addr, 0xa42, 30, 0x0001);
- write_phy(addr, 0, 27, 0x8011);
- read_phy(addr, 0, 28, &val);
- if (e->eee_enabled && (!!(val & (1 << 9))))
- e->eee_enabled = !!(val & (1 << 9));
- else
- e->eee_enabled = 0;
+ read_phy(addr, 7, 60, &val);
+ if (e->eee_enabled)
+ e->eee_enabled = !!(val & BIT(7));
+ pr_debug("%s: enabled: %d\n", __func__, e->eee_enabled);
/* GPHY page to auto */
- write_phy(addr, 0xa42, 29, 0x0000);
+ write_phy(addr, 0xa42, 30, 0x0000);
return 0;
}
@@ -1116,20 +1129,56 @@ int rtl8380_rtl8214fc_get_green(struct phy_device *phydev, struct ethtool_eee *e
static int rtl8214fc_set_eee(struct phy_device *phydev,
struct ethtool_eee *e)
{
- u32 pollMask;
- int addr = phydev->mdio.addr;
+ u32 poll_state;
+ int port = phydev->mdio.addr;
+ bool an_enabled;
+ u32 val;
- pr_debug("In %s port %d, enabled %d\n", __func__, addr, e->eee_enabled);
+ pr_debug("In %s port %d, enabled %d\n", __func__, port, e->eee_enabled);
- if (rtl8380_rtl8214fc_media_is_fibre(addr)) {
- netdev_err(phydev->attached_dev, "Port %d configured for FIBRE", addr);
+ if (rtl8380_rtl8214fc_media_is_fibre(port)) {
+ netdev_err(phydev->attached_dev, "Port %d configured for FIBRE", port);
return -ENOTSUPP;
}
- pollMask = sw_r32(RTL838X_SMI_POLL_CTRL);
- sw_w32(0, RTL838X_SMI_POLL_CTRL);
- rtl8218b_eee_set_u_boot(addr, (bool) e->eee_enabled);
- sw_w32(pollMask, RTL838X_SMI_POLL_CTRL);
+ poll_state = disable_polling(port);
+
+ /* Set GPHY page to copper */
+ write_phy(port, 0xa42, 29, 0x0001);
+
+ // Get auto-negotiation status
+ read_phy(port, 0, 0, &val);
+ an_enabled = val & BIT(12);
+
+ pr_info("%s: aneg: %d\n", __func__, an_enabled);
+ read_phy(port, 0x0A43, 25, &val);
+ val &= ~BIT(5); // Use MAC-based EEE
+ write_phy(port, 0x0A43, 25, val);
+
+ /* Enable 100M (bit 1) / 1000M (bit 2) EEE */
+ write_phy(port, 7, 60, e->eee_enabled ? 0x6 : 0);
+
+ /* 500M EEE ability */
+ read_phy(port, 0xa42, 20, &val);
+ if (e->eee_enabled)
+ val |= BIT(7);
+ else
+ val &= ~BIT(7);
+ write_phy(port, 0xa42, 20, val);
+
+ /* Restart AN if enabled */
+ if (an_enabled) {
+ pr_info("%s: doing aneg\n", __func__);
+ read_phy(port, 0, 0, &val);
+ val |= BIT(9);
+ write_phy(port, 0, 0, val);
+ }
+
+ /* GPHY page back to auto*/
+ write_phy(port, 0xa42, 29, 0);
+
+ resume_polling(poll_state);
+
return 0;
}
@@ -1147,18 +1196,72 @@ static int rtl8214fc_get_eee(struct phy_device *phydev,
return rtl8218b_get_eee(phydev, e);
}
-static int rtl8218b_set_eee(struct phy_device *phydev,
- struct ethtool_eee *e)
+static int rtl8218b_set_eee(struct phy_device *phydev, struct ethtool_eee *e)
+{
+ int port = phydev->mdio.addr;
+ u64 poll_state;
+ u32 val;
+ bool an_enabled;
+
+ pr_info("In %s, port %d, enabled %d\n", __func__, port, e->eee_enabled);
+
+ poll_state = disable_polling(port);
+
+ /* Set GPHY page to copper */
+ write_phy(port, 0, 30, 0x0001);
+ read_phy(port, 0, 0, &val);
+ an_enabled = val & BIT(12);
+
+ if (e->eee_enabled) {
+ /* 100/1000M EEE Capability */
+ write_phy(port, 0, 13, 0x0007);
+ write_phy(port, 0, 14, 0x003C);
+ write_phy(port, 0, 13, 0x4007);
+ write_phy(port, 0, 14, 0x0006);
+
+ read_phy(port, 0x0A43, 25, &val);
+ val |= BIT(4);
+ write_phy(port, 0x0A43, 25, val);
+ } else {
+ /* 100/1000M EEE Capability */
+ write_phy(port, 0, 13, 0x0007);
+ write_phy(port, 0, 14, 0x003C);
+ write_phy(port, 0, 13, 0x0007);
+ write_phy(port, 0, 14, 0x0000);
+
+ read_phy(port, 0x0A43, 25, &val);
+ val &= ~BIT(4);
+ write_phy(port, 0x0A43, 25, val);
+ }
+
+ /* Restart AN if enabled */
+ if (an_enabled) {
+ read_phy(port, 0, 0, &val);
+ val |= BIT(9);
+ write_phy(port, 0, 0, val);
+ }
+
+ /* GPHY page back to auto*/
+ write_phy(port, 0xa42, 30, 0);
+
+ pr_info("%s done\n", __func__);
+ resume_polling(poll_state);
+
+ return 0;
+}
+
+static int rtl8218d_set_eee(struct phy_device *phydev, struct ethtool_eee *e)
{
- u32 pollMask;
int addr = phydev->mdio.addr;
+ u64 poll_state;
- pr_debug("In %s, port %d, enabled %d\n", __func__, addr, e->eee_enabled);
+ pr_info("In %s, port %d, enabled %d\n", __func__, addr, e->eee_enabled);
- pollMask = sw_r32(RTL838X_SMI_POLL_CTRL);
- sw_w32(0, RTL838X_SMI_POLL_CTRL);
- rtl8218b_eee_set_u_boot(addr, (bool) e->eee_enabled);
- sw_w32(pollMask, RTL838X_SMI_POLL_CTRL);
+ poll_state = disable_polling(addr);
+
+ rtl8218d_eee_set(addr, (bool) e->eee_enabled);
+
+ resume_polling(poll_state);
return 0;
}
@@ -1791,7 +1894,10 @@ static struct phy_driver rtl83xx_phy_driver[] = {
.suspend = genphy_suspend,
.resume = genphy_resume,
.set_loopback = genphy_loopback,
- }, {
+ .set_eee = rtl8218d_set_eee,
+ .get_eee = rtl8218d_get_eee,
+ },
+ {
PHY_ID_MATCH_MODEL(PHY_ID_RTL8226),
.name = "REALTEK RTL8226",
.features = PHY_GBIT_FEATURES,
@@ -1805,6 +1911,8 @@ static struct phy_driver rtl83xx_phy_driver[] = {
.write_page = rtl8226_write_page,
.read_status = rtl8226_read_status,
.config_aneg = rtl8226_config_aneg,
+ .set_eee = rtl8226_set_eee,
+ .get_eee = rtl8226_get_eee,
},
{
PHY_ID_MATCH_MODEL(PHY_ID_RTL8218B_I),