diff options
author | Deng Qingfang <dengqf6@mail2.sysu.edu.cn> | 2018-12-27 13:39:16 +0800 |
---|---|---|
committer | Mathias Kresin <dev@kresin.me> | 2018-12-29 16:03:30 +0100 |
commit | 5580a9dd314be953fdac9827d7819058af9bea20 (patch) | |
tree | 9fc079ae117f07da16677b7ca02ab6efb174416e /target/linux | |
parent | 0599cd90e185860bbddd7dea8899f29b82368050 (diff) | |
download | upstream-5580a9dd314be953fdac9827d7819058af9bea20.tar.gz upstream-5580a9dd314be953fdac9827d7819058af9bea20.tar.bz2 upstream-5580a9dd314be953fdac9827d7819058af9bea20.zip |
ramips: add support for GeHua GHL-R-001
Specs
SoC: MT7621AT
RAM: 512MiB
Flash: 32MiB MX25L25635F SPI NOR
2.4G: MT7603EN
5G: MT7612EN
Ethernet: 4x GE ports (1x WAN, 3x LAN) with link status LEDs
USB 3.0
LEDs: POWER, 5G WIFI, 2.4G WIFI, USB, Internet.
The last two ones are controlled by GPIO
UART: There are 2 UARTs (UARTLITE1/ttyS0 and UARTLITE3/ttyS1) on board.
UARTLITE1 is close to LEDs, and UARTLITE3 is close to flash chip.
The stock u-boot uses UARTLITE1 by default. Baud rate is 57600
Flash instruction
1. telnet 192.168.9.1 2317, username is "root" and password is "admin"
One can alternatively use UART to log in
2. Put OpenWrt firmware in a FAT32 USB drive, and connect it to the router
One can alternatively download the firmware via wget through Internet
3. mtd write /path/to/openwrt.bin firmware
4. reboot
Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
Diffstat (limited to 'target/linux')
-rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/01_leds | 1 | ||||
-rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 4 | ||||
-rw-r--r-- | target/linux/ramips/dts/GHL-R-001.dts | 129 | ||||
-rw-r--r-- | target/linux/ramips/image/mt7621.mk | 9 |
4 files changed, 143 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 35a28174cc..d5238776c2 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -254,6 +254,7 @@ netgear,r6120) oy-0001) set_wifi_led "$boardname:green:wifi" ;; +gehua,ghl-r-001|\ pbr-m1) ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2" ;; diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index f958ac2bd0..2dbd891574 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -142,6 +142,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" ;; + gehua,ghl-r-001) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "4:wan" "6@eth0" + ;; alfa-network,awusfree1|\ cs-qr10|\ d105|\ diff --git a/target/linux/ramips/dts/GHL-R-001.dts b/target/linux/ramips/dts/GHL-R-001.dts new file mode 100644 index 0000000000..8aef0dcce8 --- /dev/null +++ b/target/linux/ramips/dts/GHL-R-001.dts @@ -0,0 +1,129 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7621.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "gehua,ghl-r-001", "mediatek,mt7621-soc"; + model = "GeHua GHL-R-001"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x1c000000>, <0x20000000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + leds { + compatible = "gpio-leds"; + + internet { + label = "ghl-r-001:blue:internet"; + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; + }; + + usb { + label = "ghl-r-001:blue:usb"; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; +}; + +&uartlite3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x1fb0000>; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0000>; + }; +}; + +&pcie1 { + wifi@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + + led { + led-sources = <2>; + led-active-low; + }; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0xe000>; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "jtag", "wdt"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index cb86bad9ce..810890acfa 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -179,6 +179,15 @@ define Device/firewrt endef TARGET_DEVICES += firewrt +define Device/gehua_ghl-r-001 + DTS := GHL-R-001 + IMAGE_SIZE := $(ralink_default_fw_size_32M) + DEVICE_TITLE := GeHua GHL-R-001 + DEVICE_PACKAGES := \ + kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic +endef +TARGET_DEVICES += gehua_ghl-r-001 + define Device/gnubee_gb-pc1 DTS := GB-PC1 DEVICE_TITLE := GnuBee Personal Cloud One |