diff options
| author | Tomasz Maciej Nowak <tomek_n@o2.pl> | 2020-02-25 20:07:36 +0100 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2020-03-12 12:59:44 +0100 |
| commit | 3a3d998c129c3316c188b1abd9b2d3b0fc82ab2e (patch) | |
| tree | 2b254548a57ea46d4065c0fc2818f75d23b086c2 /target/linux | |
| parent | 4ec2f33bfea560ecfa6b75e13abc515fe90d76a4 (diff) | |
| download | upstream-3a3d998c129c3316c188b1abd9b2d3b0fc82ab2e.tar.gz upstream-3a3d998c129c3316c188b1abd9b2d3b0fc82ab2e.tar.bz2 upstream-3a3d998c129c3316c188b1abd9b2d3b0fc82ab2e.zip | |
layerscape: resurrect support for FRDM-LS1012A
Re-add support for NXP FRDM-LS1012A, which mimics the flash layout of the
rest boards supported by LSDK.
0x000000000000-0x000000100000 : "bl2"
0x000000100000-0x000000500000 : "fip"
0x000000500000-0x000000600000 : "u-boot-env"
0x000000600000-0x000000a00000 : "reserved-1"
0x000000a00000-0x000000d00000 : "pfe"
0x000000d00000-0x000000f00000 : "reserved-2"
0x000000f00000-0x000001000000 : "dtb"
0x000001000000-0x000002000000 : "kernel"
0x000002000000-0x000004000000 : "ubifs"
Specification
SoC: LS1012A single core 800MHz
RAM: 512 MB DDR3
Flash: 64 MB QSPI NOR
Ethernet: 2x 10/100/1000 Mbps
Connectors: µUSB 3.0 OTG
µUSB 2.0 (debugging & power input)
2x 3.5mm jack for microphone & headphone (SGTL5000)
Arduino Shield expansion with I2C, SPI, UART, and GPIO
JTAG
LEDS: 3x (non-configurable)
Buttons: 1x (reset, non-configurable)
Be advised that erasing or writing 64MB flash takes some time to finish.
Do not reset the board until all operations end with success, otherwise
You'll need external tools to re-program the flash chip.
Installation
Follow the QSPI programing procedure for LS1012AFRWY board in
target/linux/layerscape/README, point 3.3.
Don't forget about updating U-Boot environment with MAC addresses of
ethernet interfaces, variable 'ethaddr' for eth0 and 'eth1addr' for eth1.
As the LSDK images do not support sysupgrade, nor do changes in this
commit, it's planed in upcoming submissions.
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
Diffstat (limited to 'target/linux')
| -rw-r--r-- | target/linux/layerscape/image/armv8_64b.mk | 23 |
1 files changed, 23 insertions, 0 deletions
diff --git a/target/linux/layerscape/image/armv8_64b.mk b/target/linux/layerscape/image/armv8_64b.mk index 61ea849119..0322183b96 100644 --- a/target/linux/layerscape/image/armv8_64b.mk +++ b/target/linux/layerscape/image/armv8_64b.mk @@ -15,6 +15,29 @@ define Device/Default KERNEL_ENTRY_POINT := 0x80080000 endef +define Device/ls1012afrdm + DEVICE_VENDOR := NXP + DEVICE_MODEL := FRDM-LS1012A + DEVICE_PACKAGES += \ + layerscape-ppfe \ + tfa-ls1012afrdm \ + kmod-ppfe + DEVICE_DTS := freescale/fsl-ls1012a-frdm + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 256KiB + PAGESIZE := 1 + IMAGE/firmware.bin := \ + ls-clean | \ + ls-append $(1)-bl2.pbl | pad-to 1M | \ + ls-append $(1)-fip.bin | pad-to 5M | \ + ls-append $(1)-uboot-env.bin | pad-to 10M | \ + ls-append pfe.itb | pad-to 15M | \ + ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \ + append-kernel | pad-to 32M | \ + append-ubi | check-size 67108865 +endef +TARGET_DEVICES += ls1012afrdm + define Device/ls1012ardb DEVICE_VENDOR := NXP DEVICE_MODEL := LS1012A-RDB |