diff options
| author | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-06-09 11:52:26 +0200 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-06-11 01:51:34 +0200 |
| commit | e6d4744f9ad0f76ddf1cded75355e240e81be41e (patch) | |
| tree | 9f68a39121883dcbea735ff468ece495729da027 /target/linux | |
| parent | 78e8360878d716c75fc98d6f93bdd61f156caa28 (diff) | |
| download | upstream-e6d4744f9ad0f76ddf1cded75355e240e81be41e.tar.gz upstream-e6d4744f9ad0f76ddf1cded75355e240e81be41e.tar.bz2 upstream-e6d4744f9ad0f76ddf1cded75355e240e81be41e.zip | |
ramips: fix WAN LED for D-Link DIR-810L/TRENDnet TEW-810DR
The WAN LED on DIR-810L was actually blinking on LAN1 port
activity. This has already been improved for the TEW-810DR, where
the GPIO has been set up explicitly rather than having it controlled
by the switch.
This patch also applies this setup to the DIR-810L.
In addition, the trigger in 01_leds is set up with
ucidef_set_led_switch for both devices now, so state changes should
be displayed correctly as well.
Reported-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> [DIR-810L]
Tested-by: J. Scott Heppler <shep971@centurylink.net> [TEW-810DR]
Diffstat (limited to 'target/linux')
4 files changed, 19 insertions, 20 deletions
diff --git a/target/linux/ramips/dts/mt7620a_cameo_810.dtsi b/target/linux/ramips/dts/mt7620a_cameo_810.dtsi index 8ab166d283..adbb4cf65c 100644 --- a/target/linux/ramips/dts/mt7620a_cameo_810.dtsi +++ b/target/linux/ramips/dts/mt7620a_cameo_810.dtsi @@ -93,6 +93,14 @@ mediatek,portmap = "llllw"; }; +&gsw { + mediatek,port4 = "ephy"; +}; + +&gpio2 { + status = "okay"; +}; + &wmac { pinctrl-names = "default"; pinctrl-0 = <&pa_pins>; diff --git a/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts b/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts index 63952d3e64..9dd9825433 100644 --- a/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts +++ b/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts @@ -22,11 +22,16 @@ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; }; - wan { + wan_orange { label = "dir-810l:orange:wan"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; + wan_green { + label = "dir-810l:green:wan"; + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + }; + power_orange { label = "dir-810l:orange:power"; gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; @@ -36,14 +41,7 @@ &state_default { gpio { - groups = "i2c", "uartf"; + groups = "i2c", "uartf", "ephy"; function = "gpio"; }; }; - -&gsw { - pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; - - mediatek,port4 = "ephy"; -}; diff --git a/target/linux/ramips/dts/mt7620a_trendnet_tew-810dr.dts b/target/linux/ramips/dts/mt7620a_trendnet_tew-810dr.dts index 679b429b6d..7437cde073 100644 --- a/target/linux/ramips/dts/mt7620a_trendnet_tew-810dr.dts +++ b/target/linux/ramips/dts/mt7620a_trendnet_tew-810dr.dts @@ -46,11 +46,3 @@ function = "gpio"; }; }; - -&gsw { - mediatek,port4 = "ephy"; -}; - -&gpio2 { - status = "okay"; -}; diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds index e7b9413a48..2b2ac6b46b 100755 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds @@ -54,6 +54,10 @@ comfast,cf-wr800n) ucidef_set_led_netdev "lan" "lan" "$boardname:white:ethernet" eth0.1 set_wifi_led "$boardname:white:wifi" ;; +dlink,dir-810l|\ +trendnet,tew-810dr) + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10" + ;; dlink,dwr-116-a1|\ head-weblink,hdrm200|\ ohyeah,oy-0001|\ @@ -191,9 +195,6 @@ tplink,archer-mr200) tplink,re200-v1) ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0" ;; -trendnet,tew-810dr) - ucidef_set_led_netdev "wan" "wan" "$boardname:green:wan" "eth0.2" - ;; youku,yk1) set_wifi_led "$boardname:blue:air" ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10" |