aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
author张鹏 <sd20@qxwlan.com>2020-10-16 12:53:51 +0200
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-10-17 20:18:00 +0200
commit4ff7bdfeebd4c974b74df74f779fc10891898f5d (patch)
tree137954aa25585029c2c5c62c8ac32d7b718c17fe /target/linux
parent987d9028e12f37fcb3ca095efd6ffde6d7007469 (diff)
downloadupstream-4ff7bdfeebd4c974b74df74f779fc10891898f5d.tar.gz
upstream-4ff7bdfeebd4c974b74df74f779fc10891898f5d.tar.bz2
upstream-4ff7bdfeebd4c974b74df74f779fc10891898f5d.zip
ath79: add support for Qxwlan E1700AC v2
E1700AC v2 based on Qualcomm/Atheros QCA9563 + QCA9880. Specification: - 750/400/250 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 2 x 10/1000M Mbps Ethernet (RJ45) - 1 x MiniPCI-e - 1 x SIM (3G/4G) - 1 x USB 2.0 Port - 5 x LED , 2 x Button(S8-Reset Buttun), 1 x power input - UART (J5) header on PCB (115200 8N1) Flash instruction: 1.Using tftp mode with UART connection and original LEDE image - Configure PC with static IP 192.168.1.10 and tftp server. - Rename "openwrt-ar71xx-generic-xxx-squashfs-sysupgrade.bin" to "firmware.bin" and place it in tftp server directory. - Connect PC with one of LAN ports, power up the router and press key "Enter" to access U-Boot CLI. - Use the following commands to update the device to LEDE: run lfw - After that the device will reboot and boot to LEDE. - Wait until all LEDs stops flashing and use the router. 2.Using httpd mode with Web UI connection and original LEDE image - Configure PC with static IP 192.168.1.xxx(2-255) and tftp server. - Connect PC with one of LAN ports,press the reset button, power up the router and keep button pressed for around 6-7 seconds, until leds flashing. - Open your browser and enter 192.168.1.1,You will see the upgrade interface, select "openwrt-ar71xx-generic-xxx-squashfs- sysupgrade.bin" and click the upgrade button. - After that the device will reboot and boot to LEDE. - Wait until all LEDs stops flashing and use the router. Signed-off-by: 张鹏 <sd20@qxwlan.com> [cut out of bigger patch, keep swconfig, whitespace fixes] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ath79/dts/qca9563_qxwlan_e1700ac-v2-16m.dts16
-rw-r--r--target/linux/ath79/dts/qca9563_qxwlan_e1700ac-v2-8m.dts16
-rw-r--r--target/linux/ath79/dts/qca9563_qxwlan_e1700ac.dtsi157
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/02_network2
-rw-r--r--target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata2
-rw-r--r--target/linux/ath79/image/generic.mk21
6 files changed, 214 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/qca9563_qxwlan_e1700ac-v2-16m.dts b/target/linux/ath79/dts/qca9563_qxwlan_e1700ac-v2-16m.dts
new file mode 100644
index 0000000000..b851380a47
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_qxwlan_e1700ac-v2-16m.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_qxwlan_e1700ac.dtsi"
+
+/ {
+ model = "Qxwlan E1700AC v2 16M";
+ compatible = "qxwlan,e1700ac-v2-16m", "qca,qca9563";
+};
+
+&partitions {
+ partition@70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x070000 0xf90000>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9563_qxwlan_e1700ac-v2-8m.dts b/target/linux/ath79/dts/qca9563_qxwlan_e1700ac-v2-8m.dts
new file mode 100644
index 0000000000..7aaac487c2
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_qxwlan_e1700ac-v2-8m.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_qxwlan_e1700ac.dtsi"
+
+/ {
+ model = "Qxwlan E1700AC v2 8M";
+ compatible = "qxwlan,e1700ac-v2-8m", "qca,qca9563";
+};
+
+&partitions {
+ partition@70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x070000 0x790000>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9563_qxwlan_e1700ac.dtsi b/target/linux/ath79/dts/qca9563_qxwlan_e1700ac.dtsi
new file mode 100644
index 0000000000..0c397e7dd9
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_qxwlan_e1700ac.dtsi
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ label-mac-device = &eth0;
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ usb {
+ label = "green:usb";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port0>;
+ linux,default-trigger = "usbport";
+ };
+
+ wlan2g {
+ label = "green:wlan2g";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ pridata: partition@50000 {
+ label = "pri-data";
+ reg = <0x050000 0x010000>;
+ read-only;
+ };
+
+ art: partition@60000 {
+ label = "art";
+ reg = <0x060000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "sgmii";
+ qca,mib-poll-interval = <500>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001919>;
+
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+
+ mtd-mac-address = <&pridata 0x400>;
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port0: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&uart {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 8f528c33cd..a587cfac96 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -244,6 +244,8 @@ ath79_setup_interfaces()
"0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
;;
nec,wg1200cr|\
+ qxwlan,e1700ac-v2-8m|\
+ qxwlan,e1700ac-v2-16m|\
qxwlan,e750g-v8-8m|\
qxwlan,e750g-v8-16m|\
ubnt,nanostation-ac|\
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 857f566db8..25e864ba72 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -22,6 +22,8 @@ case "$FIRMWARE" in
comfast,cf-wr650ac-v1|\
comfast,cf-wr650ac-v2|\
devolo,magic-2-wifi|\
+ qxwlan,e1700ac-v2-8m|\
+ qxwlan,e1700ac-v2-16m|\
ubnt,unifiac-lite|\
ubnt,unifiac-lr|\
ubnt,unifiac-mesh|\
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 528a63f629..8b0c247876 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -1475,6 +1475,27 @@ define Device/qihoo_c301
endef
TARGET_DEVICES += qihoo_c301
+define Device/qxwlan_e1700ac-v2
+ SOC := qca9563
+ DEVICE_VENDOR := Qxwlan
+ DEVICE_MODEL := E1700AC
+ DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
+endef
+
+define Device/qxwlan_e1700ac-v2-16m
+ $(Device/qxwlan_e1700ac-v2)
+ DEVICE_VARIANT := v2 (16M)
+ IMAGE_SIZE := 15936k
+endef
+TARGET_DEVICES += qxwlan_e1700ac-v2-16m
+
+define Device/qxwlan_e1700ac-v2-8m
+ $(Device/qxwlan_e1700ac-v2)
+ DEVICE_VARIANT := v2 (8M)
+ IMAGE_SIZE := 7744k
+endef
+TARGET_DEVICES += qxwlan_e1700ac-v2-8m
+
define Device/qxwlan_e558-v2
SOC := qca9558
DEVICE_VENDOR := Qxwlan