diff options
| author | Roger Pueyo Centelles <roger.pueyo@guifi.net> | 2020-03-12 11:37:10 +0100 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-04-27 23:17:30 +0200 |
| commit | e210fe91b186ba5b229fd64d165a631810d60dac (patch) | |
| tree | 08bafb66e4939c7a39db014e558e2f539f2e7996 /target/linux | |
| parent | f0435d53439bdf2a329d2145e40b8e8e65508754 (diff) | |
| download | upstream-e210fe91b186ba5b229fd64d165a631810d60dac.tar.gz upstream-e210fe91b186ba5b229fd64d165a631810d60dac.tar.bz2 upstream-e210fe91b186ba5b229fd64d165a631810d60dac.zip | |
ath79: add support for Ubiquiti PowerBeam 5AC Gen2
The Ubiquiti PowerBeam 5AC Gen 2 (PBE-5AC-Gen2) is an outdoor 802.11ac
5 GHz bridge with a radio feed and a dish antenna. The device is
hardware-compatible with the LiteBeam AC Gen2, plus the 4 extra LEDs.
Specifications:
- SoC: Qualcomm Atheros AR9342 rev 2
- RAM: 64 MB DDR2
- Flash: 16 MB SPI NOR (mx25l12805d)
- Ethernet: 1x 10/100/1000 Mbps Atheros 8035, 24 Vdc PoE-in
- WiFi 5 GHz: QCA988x HW2.0 Ubiquiti target 0x4100016c chip_id 0x043222ff
- WiFi 2.4 GHz: Atheros AR9340 (SoC-based)
- Buttons: 1x (reset)
- LEDs: 1x power, 1x Ethernet, 4x RSSI via GPIO. All blue.
- UART: not tested
Installation from stock airOS firmware:
- Follow instructions for WA-type Ubiquiti devices on OpenWrt wiki
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
[changed device name in commit title]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux')
5 files changed, 80 insertions, 2 deletions
diff --git a/target/linux/ath79/dts/ar9342_ubnt_powerbeam-5ac-gen2.dts b/target/linux/ath79/dts/ar9342_ubnt_powerbeam-5ac-gen2.dts new file mode 100644 index 0000000000..6b60ed256e --- /dev/null +++ b/target/linux/ath79/dts/ar9342_ubnt_powerbeam-5ac-gen2.dts @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "ar9342_ubnt_wa.dtsi" + +/ { + compatible = "ubnt,powerbeam-5ac-gen2", "ubnt,wa", "qca,ar9342"; + model = "Ubiquiti PowerBeam 5AC Gen2"; + + aliases { + led-boot = &led_rssi3; + led-failsafe = &led_rssi3; + led-upgrade = &led_rssi3; + }; + + leds { + compatible = "gpio-leds"; + + rssi0 { + label = "ubnt:blue:rssi0"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + + rssi1 { + label = "ubnt:blue:rssi1"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + rssi2 { + label = "ubnt:blue:rssi2"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + led_rssi3: rssi3 { + label = "ubnt:blue:rssi3"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy-mask = <4>; + phy4: ethernet-phy@4 { + reg = <4>; + }; +}; + +ð0 { + status = "okay"; + + /* default for ar934x, except for 1000M and 10M */ + pll-data = <0x02000000 0x00000101 0x00001313>; + + mtd-mac-address = <&art 0x0>; + + phy-mode = "rgmii-id"; + phy-handle = <&phy4>; + + gmac-config { + device = <&gmac>; + rxd-delay = <3>; + rxdv-delay = <3>; + }; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index ca4bb3dd33..a3c5b3f988 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -282,7 +282,8 @@ ubnt,rocket-m) ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "ubnt:green:link4" "wlan0" "76" "100" ;; ubnt,nanobeam-ac|\ -ubnt,nanostation-ac) +ubnt,nanostation-ac|\ +ubnt,powerbeam-5ac-gen2) ucidef_set_rssimon "wlan0" "200000" "1" ucidef_set_led_rssi "rssilow" "RSSILOW" "ubnt:blue:rssi0" "wlan0" "1" "100" ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "ubnt:blue:rssi1" "wlan0" "26" "100" diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 543543ad54..d7f7eed829 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -53,6 +53,7 @@ ath79_setup_interfaces() ubnt,nanostation-loco-m|\ ubnt,nanostation-loco-m-xw|\ ubnt,picostation-m|\ + ubnt,powerbeam-5ac-gen2|\ ubnt,rocket-m|\ ubnt,unifiac-lite|\ ubnt,unifiac-lr|\ @@ -468,7 +469,8 @@ ath79_setup_macs() ubnt,unifi) label_mac=$(cat /sys/class/ieee80211/phy0/macaddress) ;; - ubnt,litebeam-ac-gen2) + ubnt,litebeam-ac-gen2|\ + ubnt,powerbeam-5ac-gen2) label_mac=$(mtd_get_mac_binary art 0x5006) ;; ubnt,routerstation|\ diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index dd821dd339..336b0f3c8f 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -25,6 +25,7 @@ case "$FIRMWARE" in ubnt,nanobeam-ac|\ ubnt,nanostation-ac|\ ubnt,nanostation-ac-loco|\ + ubnt,powerbeam-5ac-gen2|\ ubnt,unifiac-pro|\ yuncore,a770) caldata_extract "art" 0x5000 0x844 diff --git a/target/linux/ath79/image/generic-ubnt.mk b/target/linux/ath79/image/generic-ubnt.mk index 7ad54083b6..d056ab6783 100644 --- a/target/linux/ath79/image/generic-ubnt.mk +++ b/target/linux/ath79/image/generic-ubnt.mk @@ -243,6 +243,14 @@ define Device/ubnt_picostation-m endef TARGET_DEVICES += ubnt_picostation-m +define Device/ubnt_powerbeam-5ac-gen2 + $(Device/ubnt-wa) + DEVICE_MODEL := PowerBeam 5AC + DEVICE_VARIANT := Gen2 + DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds +endef +TARGET_DEVICES += ubnt_powerbeam-5ac-gen2 + define Device/ubnt_rocket-m $(Device/ubnt-xm) SOC := ar7241 |