aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorAndreas Wiese <aw-openwrt@meterriblecrew.net>2020-05-27 15:31:30 +0200
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-05-31 15:44:05 +0200
commitc764c512ac18ce9724b3fb0e476831150817c162 (patch)
tree1e9d99d246846b38ba5e8ca95160a073ba967c03 /target/linux
parent7e513136c63108bf55b38be4d2b65aa00b0d2b26 (diff)
downloadupstream-c764c512ac18ce9724b3fb0e476831150817c162.tar.gz
upstream-c764c512ac18ce9724b3fb0e476831150817c162.tar.bz2
upstream-c764c512ac18ce9724b3fb0e476831150817c162.zip
ath79: add support for TP-Link RE450 v3
TP-Link RE450 v3 is a dual band router/range-extender based on Qualcomm/Atheros QCA9563 + QCA9880. This device is nearly identical to RE450 v2 besides a modified flash layout (hence I think force-flashing a RE450v2 image will lead to at least loss of MAC address). Specification: - 775 MHz CPU - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 1x 10/100/1000 Mbps Ethernet (AR8033 PHY) - 7x LED, 4x button- - possible UART header on PCB¹ Flash instruction: Apply factory image in OEM firmware web-gui. ¹ Didn't check to connect as I didn't even manage to connect on RE450v2 (AFAIU it requires disconnecting some resistors, which I was too much of a coward to do). But given the similarities to v2 I think it's the same or very similar procedure (and most likely also the only way to debrick). Signed-off-by: Andreas Wiese <aw-openwrt@meterriblecrew.net> [remove dts-v1 and compatible in DTSI] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ath79/dts/qca9563_tplink_re450-v2.dts201
-rw-r--r--target/linux/ath79/dts/qca9563_tplink_re450-v3.dts53
-rw-r--r--target/linux/ath79/dts/qca9563_tplink_re450.dtsi154
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata3
-rw-r--r--target/linux/ath79/image/generic-tp-link.mk12
7 files changed, 251 insertions, 176 deletions
diff --git a/target/linux/ath79/dts/qca9563_tplink_re450-v2.dts b/target/linux/ath79/dts/qca9563_tplink_re450-v2.dts
index 16bc26c978..4446163a50 100644
--- a/target/linux/ath79/dts/qca9563_tplink_re450-v2.dts
+++ b/target/linux/ath79/dts/qca9563_tplink_re450-v2.dts
@@ -1,194 +1,47 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca956x.dtsi"
+#include "qca9563_tplink_re450.dtsi"
/ {
compatible = "tplink,re450-v2", "qca,qca9563";
model = "TP-Link RE450 v2";
+};
- chosen {
- bootargs = "console=ttyS0,115200n8";
+&partitions {
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
};
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- mdio-gpio0 = &mdio2;
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x5e0000>;
};
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "tp-link:blue:power";
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- };
-
- wlan2g {
- label = "tp-link:blue:wlan2g";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy1tpt";
- };
-
- wlan5g {
- label = "tp-link:blue:wlan5g";
- gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
-
- lan_link {
- label = "tp-link:green:lan_link";
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- };
-
- lan_data {
- label = "tp-link:green:lan_data";
- gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
- };
-
- wps_blue {
- label = "tp-link:blue:wps";
- gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
- };
-
- wps_red {
- label = "tp-link:red:wps";
- gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
- };
+ partition@600000 {
+ label = "partition-table";
+ reg = <0x600000 0x010000>;
+ read-only;
};
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "Reset button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- power {
- label = "Power button";
- linux,code = <KEY_POWER>;
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- leds {
- label = "LED control button";
- linux,code = <BTN_0>;
- gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- wps {
- label = "WPS button";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
+ info: partition@610000 {
+ label = "info";
+ reg = <0x610000 0x020000>;
+ read-only;
};
- mdio2: mdio {
- compatible = "virtual,mdio-gpio";
-
- gpios = <&gpio 3 GPIO_ACTIVE_HIGH>, /* MDC */
- <&gpio 4 GPIO_ACTIVE_HIGH>; /* MDIO */
- #address-cells = <1>;
- #size-cells = <0>;
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- device_type = "ethernet-phy";
- reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- };
+ partition@630000 {
+ label = "config";
+ reg = <0x630000 0x020000>;
+ read-only;
};
-};
-
-&pcie {
- status = "okay";
-};
-
-&uart {
- status = "okay";
-};
-
-&gpio {
- status = "okay";
-};
-
-&spi {
- status = "okay";
-
- num-cs = <1>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x000000 0x020000>;
- read-only;
- };
-
- partition@20000 {
- compatible = "tplink,firmware";
- label = "firmware";
- reg = <0x020000 0x5e0000>;
- };
-
- partition@600000 {
- label = "partition-table";
- reg = <0x600000 0x010000>;
- read-only;
- };
- info: partition@610000 {
- label = "info";
- reg = <0x610000 0x020000>;
- read-only;
- };
-
- partition@630000 {
- label = "config";
- reg = <0x630000 0x020000>;
- read-only;
- };
-
- art: partition@7f0000 {
- label = "art";
- reg = <0x7f0000 0x010000>;
- read-only;
- };
- };
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
};
};
-
-&eth0 {
- status = "okay";
-
- phy-mode = "sgmii";
- phy-handle = <&phy4>;
-
- mtd-mac-address = <&info 0x8>;
-};
-
-&wmac {
- status = "okay";
-
- mtd-cal-data = <&art 0x1000>;
- mtd-mac-address = <&info 0x8>;
-};
diff --git a/target/linux/ath79/dts/qca9563_tplink_re450-v3.dts b/target/linux/ath79/dts/qca9563_tplink_re450-v3.dts
new file mode 100644
index 0000000000..f85f02428b
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_re450-v3.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "qca9563_tplink_re450.dtsi"
+
+/ {
+ compatible = "tplink,re450-v3", "qca,qca9563";
+ model = "TP-Link RE450 v3";
+};
+
+&partitions {
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ info: partition@20000 {
+ label = "info";
+ reg = <0x020000 0x002000>;
+ read-only;
+ };
+
+ partition@22000 {
+ label = "partition-table";
+ reg = <0x022000 0x002000>;
+ read-only;
+ };
+
+ partition@24000 {
+ label = "info2";
+ reg = <0x024000 0x00a000>;
+ read-only;
+ };
+
+ partition@2e000 {
+ label = "config";
+ reg = <0x02e000 0x022000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x050000 0x7a0000>;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9563_tplink_re450.dtsi b/target/linux/ath79/dts/qca9563_tplink_re450.dtsi
new file mode 100644
index 0000000000..4e1195b647
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_re450.dtsi
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca956x.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ mdio-gpio0 = &mdio2;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "tp-link:blue:power";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "tp-link:blue:wlan2g";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wlan5g {
+ label = "tp-link:blue:wlan5g";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ lan_link {
+ label = "tp-link:green:lan_link";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ lan_data {
+ label = "tp-link:green:lan_data";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wps_blue {
+ label = "tp-link:blue:wps";
+ gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps_red {
+ label = "tp-link:red:wps";
+ gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ power {
+ label = "Power button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ leds {
+ label = "LED control button";
+ linux,code = <BTN_0>;
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ mdio2: mdio {
+ compatible = "virtual,mdio-gpio";
+
+ gpios = <&gpio 3 GPIO_ACTIVE_HIGH>, /* MDC */
+ <&gpio 4 GPIO_ACTIVE_HIGH>; /* MDIO */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ device_type = "ethernet-phy";
+ reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ phy-mode = "sgmii";
+ phy-handle = <&phy4>;
+
+ mtd-mac-address = <&info 0x8>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&info 0x8>;
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index d4fdb423ab..5521379cea 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -248,7 +248,8 @@ tplink,tl-wr902ac-v1)
;;
tplink,re355-v1|\
tplink,re450-v1|\
-tplink,re450-v2)
+tplink,re450-v2|\
+tplink,re450-v3)
ucidef_set_led_netdev "lan_data" "LAN Data" "tp-link:green:lan_data" "eth0" "tx rx"
ucidef_set_led_netdev "lan_link" "LAN Link" "tp-link:green:lan_link" "eth0" "link"
;;
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 6fe76817ff..1672f093a7 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -43,6 +43,7 @@ ath79_setup_interfaces()
tplink,re355-v1|\
tplink,re450-v1|\
tplink,re450-v2|\
+ tplink,re450-v3|\
tplink,tl-wr902ac-v1|\
ubnt,bullet-m-ar7240|\
ubnt,bullet-m-ar7241|\
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 3ce95905b8..29815a1ada 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -118,7 +118,8 @@ case "$FIRMWARE" in
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
;;
- tplink,re450-v2)
+ tplink,re450-v2|\
+ tplink,re450-v3)
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
;;
diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk
index 3eedce4f8e..5fb36ca621 100644
--- a/target/linux/ath79/image/generic-tp-link.mk
+++ b/target/linux/ath79/image/generic-tp-link.mk
@@ -400,6 +400,18 @@ define Device/tplink_re450-v2
endef
TARGET_DEVICES += tplink_re450-v2
+define Device/tplink_re450-v3
+ $(Device/tplink-safeloader)
+ SOC := qca9563
+ IMAGE_SIZE := 7808k
+ DEVICE_MODEL := RE450
+ DEVICE_VARIANT := v3
+ DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
+ TPLINK_BOARD_ID := RE450-V3
+ LOADER_TYPE := elf
+endef
+TARGET_DEVICES += tplink_re450-v3
+
define Device/tplink_tl-mr6400-v1
$(Device/tplink-8mlzma)
SOC := qca9531