diff options
| author | Martin Blumenstingl <martin.blumenstingl@googlemail.com> | 2017-02-12 22:29:16 +0000 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2017-02-13 07:57:15 +0100 |
| commit | 70395ae8cbe0bc7d0d0b27b5088b9ac4b2f67f86 (patch) | |
| tree | 01b7b4100bec67f707485ef3da3c33386e3dcf9c /target/linux | |
| parent | 4c09f996054ca1fa2bbef6b4ef8acec3f466e839 (diff) | |
| download | upstream-70395ae8cbe0bc7d0d0b27b5088b9ac4b2f67f86.tar.gz upstream-70395ae8cbe0bc7d0d0b27b5088b9ac4b2f67f86.tar.bz2 upstream-70395ae8cbe0bc7d0d0b27b5088b9ac4b2f67f86.zip | |
lantiq: fix patching the wifi mac address on BTHOMEHUBV3A
The firmware hotplug script tries to read the mac address from a
partition with the name "uboot-env" which does not exist (instead it's
name is uboot_env). This broke calculation of the new checksum (after
patching the mac address) which resulted in ath9k refusing to use the
EEPROM data.
The original error reported by ath9k was:
PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
ath: phy0: Bad EEPROM checksum 0x2523
ath: phy0: Unable to initialize hardware; initialization status: -22
ath9k 0000:00:0e.0: Failed to initialize device
Fixes: a20616863d32d9 ("lantiq: use ath9k device tree bindings
binding/owl-loader")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Diffstat (limited to 'target/linux')
| -rw-r--r-- | target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom index fa52dd59ec..1c6b0663fa 100644 --- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom +++ b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom @@ -129,7 +129,7 @@ case "$FIRMWARE" in ;; BTHOMEHUBV3A) ath9k_eeprom_extract "art-copy" 0 1 - ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 268 + ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot_env ethaddr) +2) 268 ;; BTHOMEHUBV5A) ath9k_ubi_eeprom_extract "caldata" 4096 0 |