ipq806x: replace phy dwc3 patch with upstream version

- Replace dwc3 phy patch with upstream version
- Rework the dts to use the upstream bindings
- Update changed config flags
- Rename module to reflect config name

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
[fix qcom,tx-deamp_3_5db typo, refresh patches, rename kmod]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Paul Blazejowski <paulb@blazebox.homeip.net> [R7800]

8 files changed, 673 insertions, 664 deletions

diff --git a/target/linux/ipq806x/Makefile b/target/linux/ipq806x/Makefile
index 98ea35e0a6..14f65474f9 100644
--- a/target/linux/ipq806x/Makefile
+++ b/target/linux/ipq806x/Makefile
@@ -19,7 +19,7 @@ DEFAULT_PACKAGES += \
 	kmod-leds-gpio kmod-gpio-button-hotplug swconfig \
 	kmod-ata-ahci kmod-ata-ahci-platform \
 	kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \
-	kmod-usb-phy-qcom-dwc3 kmod-usb3 kmod-usb-dwc3-qcom \
+	kmod-phy-qcom-ipq806x-usb kmod-usb3 kmod-usb-dwc3-qcom \
 	kmod-ath10k-ct wpad-basic \
 	uboot-envtools
 
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
index 5d762046af..c0bcee783d 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
@@ -31,13 +31,13 @@
 };
 
 &ss_phy_0 {
-	rx_eq = <2>;
-	tx_deamp_3_5db = <32>;
-	mpll = <0xa0>;
+	qcom,rx-eq = <2>;
+	qcom,tx-deamp_3_5db = <32>;
+	qcom,mpll = <5>;
 };
 
 &ss_phy_1 {
-	rx_eq = <2>;
-	tx_deamp_3_5db = <32>;
-	mpll = <0xa0>;
+	qcom,rx-eq = <2>;
+	qcom,tx-deamp_3_5db = <32>;
+	qcom,mpll = <5>;
 };
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065.dtsi b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065.dtsi
index fad39cf008..0a58c97095 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065.dtsi
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065.dtsi
@@ -46,15 +46,15 @@
 };
 
 &ss_phy_0 {
-	rx_eq = <2>;
-	tx_deamp_3_5db = <32>;
-	mpll = <0xa0>;
+	qcom,rx-eq = <2>;
+	qcom,tx-deamp_3_5db = <32>;
+	qcom,mpll = <5>;
 };
 
 &ss_phy_1 {
-	rx_eq = <2>;
-	tx_deamp_3_5db = <32>;
-	mpll = <0xa0>;
+	qcom,rx-eq = <2>;
+	qcom,tx-deamp_3_5db = <32>;
+	qcom,mpll = <5>;
 };
 
 &opp_table0 {
diff --git a/target/linux/ipq806x/patches-5.4/0032-phy-add-qcom-dwc3-phy.patch b/target/linux/ipq806x/patches-5.4/0032-phy-add-qcom-dwc3-phy.patch
deleted file mode 100644
index 3eabba0ab4..0000000000
--- a/target/linux/ipq806x/patches-5.4/0032-phy-add-qcom-dwc3-phy.patch
+++ /dev/null
@@ -1,614 +0,0 @@
-From b9004f4fd23e4c614d71c972f3a9311665480e29 Mon Sep 17 00:00:00 2001
-From: Andy Gross <agross@codeaurora.org>
-Date: Thu, 9 Mar 2017 08:19:18 +0100
-Subject: [PATCH 32/69] phy: add qcom dwc3 phy
-
-Signed-off-by: Andy Gross <agross@codeaurora.org>
----
-
---- a/drivers/phy/qualcomm/Kconfig
-+++ b/drivers/phy/qualcomm/Kconfig
-@@ -91,3 +91,15 @@ config PHY_QCOM_USB_HSIC
- 	select GENERIC_PHY
- 	help
- 	  Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
-+
-+config PHY_QCOM_DWC3
-+	tristate "QCOM DWC3 USB PHY support"
-+	depends on ARCH_QCOM
-+	depends on HAS_IOMEM
-+	depends on OF
-+	select GENERIC_PHY
-+	help
-+	  This option enables support for the Synopsis PHYs present inside the
-+	  Qualcomm USB3.0 DWC3 controller.  This driver supports both HS and SS
-+	  PHY controllers.
-+
---- a/drivers/phy/qualcomm/Makefile
-+++ b/drivers/phy/qualcomm/Makefile
-@@ -10,3 +10,4 @@ obj-$(CONFIG_PHY_QCOM_UFS_14NM)		+= phy-
- obj-$(CONFIG_PHY_QCOM_UFS_20NM)		+= phy-qcom-ufs-qmp-20nm.o
- obj-$(CONFIG_PHY_QCOM_USB_HS) 		+= phy-qcom-usb-hs.o
- obj-$(CONFIG_PHY_QCOM_USB_HSIC) 	+= phy-qcom-usb-hsic.o
-+obj-$(CONFIG_PHY_QCOM_DWC3)		+= phy-qcom-dwc3.o
---- /dev/null
-+++ b/drivers/phy/qualcomm/phy-qcom-dwc3.c
-@@ -0,0 +1,578 @@
-+/* Copyright (c) 2014-2015, Code Aurora Forum. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+* This program is distributed in the hope that it will be useful,
-+* but WITHOUT ANY WARRANTY; without even the implied warranty of
-+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+* GNU General Public License for more details.
-+*/
-+
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/phy/phy.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/regmap.h>
-+#include <linux/mfd/syscon.h>
-+
-+/**
-+ *  USB QSCRATCH Hardware registers
-+ */
-+#define QSCRATCH_GENERAL_CFG		(0x08)
-+#define HSUSB_PHY_CTRL_REG		(0x10)
-+
-+/* PHY_CTRL_REG */
-+#define HSUSB_CTRL_DMSEHV_CLAMP			BIT(24)
-+#define HSUSB_CTRL_USB2_SUSPEND			BIT(23)
-+#define HSUSB_CTRL_UTMI_CLK_EN			BIT(21)
-+#define HSUSB_CTRL_UTMI_OTG_VBUS_VALID		BIT(20)
-+#define HSUSB_CTRL_USE_CLKCORE			BIT(18)
-+#define HSUSB_CTRL_DPSEHV_CLAMP			BIT(17)
-+#define HSUSB_CTRL_COMMONONN			BIT(11)
-+#define HSUSB_CTRL_ID_HV_CLAMP			BIT(9)
-+#define HSUSB_CTRL_OTGSESSVLD_CLAMP		BIT(8)
-+#define HSUSB_CTRL_CLAMP_EN			BIT(7)
-+#define HSUSB_CTRL_RETENABLEN			BIT(1)
-+#define HSUSB_CTRL_POR				BIT(0)
-+
-+/* QSCRATCH_GENERAL_CFG */
-+#define HSUSB_GCFG_XHCI_REV		BIT(2)
-+
-+/**
-+ *  USB QSCRATCH Hardware registers
-+ */
-+#define SSUSB_PHY_CTRL_REG		(0x30)
-+#define SSUSB_PHY_PARAM_CTRL_1		(0x34)
-+#define SSUSB_PHY_PARAM_CTRL_2		(0x38)
-+#define CR_PROTOCOL_DATA_IN_REG	(0x3c)
-+#define CR_PROTOCOL_DATA_OUT_REG	(0x40)
-+#define CR_PROTOCOL_CAP_ADDR_REG	(0x44)
-+#define CR_PROTOCOL_CAP_DATA_REG	(0x48)
-+#define CR_PROTOCOL_READ_REG		(0x4c)
-+#define CR_PROTOCOL_WRITE_REG		(0x50)
-+
-+/* PHY_CTRL_REG */
-+#define SSUSB_CTRL_REF_USE_PAD		BIT(28)
-+#define SSUSB_CTRL_TEST_POWERDOWN	BIT(27)
-+#define SSUSB_CTRL_LANE0_PWR_PRESENT	BIT(24)
-+#define SSUSB_CTRL_SS_PHY_EN		BIT(8)
-+#define SSUSB_CTRL_SS_PHY_RESET		BIT(7)
-+
-+/* SSPHY control registers - Does this need 0x30? */
-+#define SSPHY_CTRL_RX_OVRD_IN_HI(lane)	(0x1006 + 0x100 * lane)
-+#define SSPHY_CTRL_TX_OVRD_DRV_LO(lane)	(0x1002 + 0x100 * lane)
-+
-+/* SSPHY SoC version specific values */
-+#define SSPHY_RX_EQ_VALUE		4	/* Override value for rx_eq */
-+#define SSPHY_TX_DEEMPH_3_5DB		23	/* Override value for transmit
-+						   preemphasis */
-+#define SSPHY_MPLL_VALUE		0	/* Override value for mpll */
-+
-+/* QSCRATCH PHY_PARAM_CTRL1 fields */
-+#define PHY_PARAM_CTRL1_TX_FULL_SWING_MASK	0x07f00000u
-+#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK	0x000fc000u
-+#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK	0x00003f00u
-+#define PHY_PARAM_CTRL1_LOS_BIAS_MASK		0x000000f8u
-+
-+#define PHY_PARAM_CTRL1_MASK				\
-+		(PHY_PARAM_CTRL1_TX_FULL_SWING_MASK |	\
-+		 PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK |	\
-+		 PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK |	\
-+		 PHY_PARAM_CTRL1_LOS_BIAS_MASK)
-+
-+#define PHY_PARAM_CTRL1_TX_FULL_SWING(x)	\
-+		(((x) << 20) & PHY_PARAM_CTRL1_TX_FULL_SWING_MASK)
-+#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB(x)	\
-+		(((x) << 14) & PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK)
-+#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(x)	\
-+		(((x) <<  8) & PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK)
-+#define PHY_PARAM_CTRL1_LOS_BIAS(x)	\
-+		(((x) <<  3) & PHY_PARAM_CTRL1_LOS_BIAS_MASK)
-+
-+/* RX OVRD IN HI bits */
-+#define RX_OVRD_IN_HI_RX_RESET_OVRD		BIT(13)
-+#define RX_OVRD_IN_HI_RX_RX_RESET		BIT(12)
-+#define RX_OVRD_IN_HI_RX_EQ_OVRD		BIT(11)
-+#define RX_OVRD_IN_HI_RX_EQ_MASK		0x0700
-+#define RX_OVRD_IN_HI_RX_EQ_SHIFT		8
-+#define RX_OVRD_IN_HI_RX_EQ_EN_OVRD		BIT(7)
-+#define RX_OVRD_IN_HI_RX_EQ_EN			BIT(6)
-+#define RX_OVRD_IN_HI_RX_LOS_FILTER_OVRD	BIT(5)
-+#define RX_OVRD_IN_HI_RX_LOS_FILTER_MASK	0x0018
-+#define RX_OVRD_IN_HI_RX_RATE_OVRD		BIT(2)
-+#define RX_OVRD_IN_HI_RX_RATE_MASK		0x0003
-+
-+/* TX OVRD DRV LO register bits */
-+#define TX_OVRD_DRV_LO_AMPLITUDE_MASK	0x007F
-+#define TX_OVRD_DRV_LO_PREEMPH_MASK	0x3F80
-+#define TX_OVRD_DRV_LO_PREEMPH_SHIFT	7
-+#define TX_OVRD_DRV_LO_EN		BIT(14)
-+
-+/* SS CAP register bits */
-+#define SS_CR_CAP_ADDR_REG		BIT(0)
-+#define SS_CR_CAP_DATA_REG		BIT(0)
-+#define SS_CR_READ_REG			BIT(0)
-+#define SS_CR_WRITE_REG			BIT(0)
-+
-+struct qcom_dwc3_usb_phy {
-+	struct regmap		*base;
-+	struct device		*dev;
-+	struct clk		*xo_clk;
-+	struct clk		*ref_clk;
-+	u32			rx_eq;
-+	u32			tx_deamp_3_5db;
-+	u32			mpll;
-+};
-+
-+struct qcom_dwc3_phy_drvdata {
-+	struct phy_ops	ops;
-+	u32		clk_rate;
-+};
-+
-+/**
-+ * Write register and read back masked value to confirm it is written
-+ *
-+ * @base - QCOM DWC3 PHY base virtual address.
-+ * @offset - register offset.
-+ * @mask - register bitmask specifying what should be updated
-+ * @val - value to write.
-+ */
-+static inline void qcom_dwc3_phy_write_readback(
-+	struct qcom_dwc3_usb_phy *phy_dwc3, u32 offset,
-+	const u32 mask, u32 val)
-+{
-+	u32 write_val, tmp;
-+
-+	tmp = regmap_read(phy_dwc3->base, offset, &tmp);
-+	tmp &= ~mask;		/* retain other bits */
-+	write_val = tmp | val;
-+
-+	regmap_write(phy_dwc3->base, offset, write_val);
-+
-+	/* Read back to see if val was written */
-+	regmap_read(phy_dwc3->base, offset, &tmp);
-+	tmp &= mask;		/* clear other bits */
-+
-+	if (tmp != val)
-+		dev_err(phy_dwc3->dev, "write: %x to QSCRATCH: %x FAILED\n",
-+			val, offset);
-+}
-+
-+static int wait_for_latch(struct regmap *base, u32 addr)
-+{
-+	u32 retry = 10, data;
-+
-+	while (true) {
-+		regmap_read(base, addr, &data);
-+		if (!data)
-+			break;
-+
-+		if (--retry == 0)
-+			return -ETIMEDOUT;
-+
-+		usleep_range(10, 20);
-+	}
-+
-+	return 0;
-+}
-+
-+/**
-+ * Write SSPHY register
-+ *
-+ * @base - QCOM DWC3 PHY base virtual address.
-+ * @addr - SSPHY address to write.
-+ * @val - value to write.
-+ */
-+static int qcom_dwc3_ss_write_phycreg(struct qcom_dwc3_usb_phy *phy_dwc3,
-+					u32 addr, u32 val)
-+{
-+	int ret;
-+
-+	regmap_write(phy_dwc3->base, CR_PROTOCOL_DATA_IN_REG, addr);
-+	regmap_write(phy_dwc3->base, CR_PROTOCOL_CAP_ADDR_REG, SS_CR_CAP_ADDR_REG);
-+
-+	ret = wait_for_latch(phy_dwc3->base, CR_PROTOCOL_CAP_ADDR_REG);
-+	if (ret)
-+		goto err_wait;
-+
-+	regmap_write(phy_dwc3->base, CR_PROTOCOL_DATA_IN_REG, val);
-+	regmap_write(phy_dwc3->base, CR_PROTOCOL_CAP_DATA_REG, SS_CR_CAP_DATA_REG);
-+
-+	ret = wait_for_latch(phy_dwc3->base, CR_PROTOCOL_CAP_DATA_REG);
-+	if (ret)
-+		goto err_wait;
-+
-+	regmap_write(phy_dwc3->base, CR_PROTOCOL_WRITE_REG, SS_CR_WRITE_REG);
-+
-+	ret = wait_for_latch(phy_dwc3->base, CR_PROTOCOL_WRITE_REG);
-+
-+err_wait:
-+	if (ret)
-+		dev_err(phy_dwc3->dev, "timeout waiting for latch\n");
-+	return ret;
-+}
-+
-+/**
-+ * Read SSPHY register.
-+ *
-+ * @base - QCOM DWC3 PHY base virtual address.
-+ * @addr - SSPHY address to read.
-+ */
-+static int qcom_dwc3_ss_read_phycreg(struct regmap *base, u32 addr, u32 *val)
-+{
-+	int ret;
-+
-+	regmap_write(base, CR_PROTOCOL_DATA_IN_REG, addr);
-+	regmap_write(base, CR_PROTOCOL_CAP_ADDR_REG, SS_CR_CAP_ADDR_REG);
-+
-+	ret = wait_for_latch(base, CR_PROTOCOL_CAP_ADDR_REG);
-+	if (ret)
-+		goto err_wait;
-+
-+	/*
-+	 * Due to hardware bug, first read of SSPHY register might be
-+	 * incorrect. Hence as workaround, SW should perform SSPHY register
-+	 * read twice, but use only second read and ignore first read.
-+	 */
-+	regmap_write(base, CR_PROTOCOL_READ_REG, SS_CR_READ_REG);
-+
-+	ret = wait_for_latch(base, CR_PROTOCOL_READ_REG);
-+	if (ret)
-+		goto err_wait;
-+
-+	/* throwaway read */
-+	regmap_read(base, CR_PROTOCOL_DATA_OUT_REG, &ret);
-+
-+	regmap_write(base, CR_PROTOCOL_READ_REG, SS_CR_READ_REG);
-+
-+	ret = wait_for_latch(base, CR_PROTOCOL_READ_REG);
-+	if (ret)
-+		goto err_wait;
-+
-+	regmap_read(base, CR_PROTOCOL_DATA_OUT_REG, val);
-+
-+err_wait:
-+	return ret;
-+}
-+
-+static int qcom_dwc3_hs_phy_init(struct phy *phy)
-+{
-+	struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
-+	int ret;
-+	u32 val;
-+
-+	ret = clk_prepare_enable(phy_dwc3->xo_clk);
-+	if (ret)
-+		return ret;
-+
-+	ret = clk_prepare_enable(phy_dwc3->ref_clk);
-+	if (ret) {
-+		clk_disable_unprepare(phy_dwc3->xo_clk);
-+		return ret;
-+	}
-+
-+	/*
-+	 * HSPHY Initialization: Enable UTMI clock, select 19.2MHz fsel
-+	 * enable clamping, and disable RETENTION (power-on default is ENABLED)
-+	 */
-+	val = HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_DMSEHV_CLAMP |
-+		HSUSB_CTRL_RETENABLEN  | HSUSB_CTRL_COMMONONN |
-+		HSUSB_CTRL_OTGSESSVLD_CLAMP | HSUSB_CTRL_ID_HV_CLAMP |
-+		HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_UTMI_OTG_VBUS_VALID |
-+		HSUSB_CTRL_UTMI_CLK_EN | HSUSB_CTRL_CLAMP_EN | 0x70;
-+
-+	/* use core clock if external reference is not present */
-+	if (!phy_dwc3->xo_clk)
-+		val |= HSUSB_CTRL_USE_CLKCORE;
-+
-+	regmap_write(phy_dwc3->base, HSUSB_PHY_CTRL_REG, val);
-+	usleep_range(2000, 2200);
-+
-+	/* Disable (bypass) VBUS and ID filters */
-+	regmap_write(phy_dwc3->base, QSCRATCH_GENERAL_CFG, HSUSB_GCFG_XHCI_REV);
-+
-+	return 0;
-+}
-+
-+static int qcom_dwc3_hs_phy_exit(struct phy *phy)
-+{
-+	struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
-+
-+	clk_disable_unprepare(phy_dwc3->ref_clk);
-+	clk_disable_unprepare(phy_dwc3->xo_clk);
-+
-+	return 0;
-+}
-+
-+static int qcom_dwc3_ss_phy_init(struct phy *phy)
-+{
-+	struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
-+	int ret;
-+	u32 data = 0;
-+
-+	ret = clk_prepare_enable(phy_dwc3->xo_clk);
-+	if (ret)
-+		return ret;
-+
-+	ret = clk_prepare_enable(phy_dwc3->ref_clk);
-+	if (ret) {
-+		clk_disable_unprepare(phy_dwc3->xo_clk);
-+		return ret;
-+	}
-+
-+	/* reset phy */
-+	regmap_read(phy_dwc3->base, SSUSB_PHY_CTRL_REG, &data);
-+	regmap_write(phy_dwc3->base, SSUSB_PHY_CTRL_REG,
-+		data | SSUSB_CTRL_SS_PHY_RESET);
-+	usleep_range(2000, 2200);
-+	regmap_write(phy_dwc3->base, SSUSB_PHY_CTRL_REG, data);
-+
-+	/* clear REF_PAD if we don't have XO clk */
-+	if (!phy_dwc3->xo_clk)
-+		data &= ~SSUSB_CTRL_REF_USE_PAD;
-+	else
-+		data |= SSUSB_CTRL_REF_USE_PAD;
-+
-+	regmap_write(phy_dwc3->base, SSUSB_PHY_CTRL_REG, data);
-+
-+	/* wait for ref clk to become stable, this can take up to 30ms */
-+	msleep(30);
-+
-+	data |= SSUSB_CTRL_SS_PHY_EN | SSUSB_CTRL_LANE0_PWR_PRESENT;
-+	regmap_write(phy_dwc3->base, SSUSB_PHY_CTRL_REG, data);
-+
-+	/*
-+	 * WORKAROUND: There is SSPHY suspend bug due to which USB enumerates
-+	 * in HS mode instead of SS mode. Workaround it by asserting
-+	 * LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus mode
-+	 */
-+	ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, 0x102D, &data);
-+	if (ret)
-+		goto err_phy_trans;
-+
-+	data |= (1 << 7);
-+	ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x102D, data);
-+	if (ret)
-+		goto err_phy_trans;
-+
-+	ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, 0x1010, &data);
-+	if (ret)
-+		goto err_phy_trans;
-+
-+	data &= ~0xff0;
-+	data |= 0x20;
-+	ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x1010, data);
-+	if (ret)
-+		goto err_phy_trans;
-+
-+	/*
-+	 * Fix RX Equalization setting as follows
-+	 * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0
-+	 * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1
-+	 * LANE0.RX_OVRD_IN_HI.RX_EQ set based on SoC version
-+	 * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1
-+	 */
-+	ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base,
-+			SSPHY_CTRL_RX_OVRD_IN_HI(0), &data);
-+	if (ret)
-+		goto err_phy_trans;
-+
-+	data &= ~RX_OVRD_IN_HI_RX_EQ_EN;
-+	data |= RX_OVRD_IN_HI_RX_EQ_EN_OVRD;
-+	data &= ~RX_OVRD_IN_HI_RX_EQ_MASK;
-+	data |= phy_dwc3->rx_eq << RX_OVRD_IN_HI_RX_EQ_SHIFT;
-+	data |= RX_OVRD_IN_HI_RX_EQ_OVRD;
-+	ret = qcom_dwc3_ss_write_phycreg(phy_dwc3,
-+		SSPHY_CTRL_RX_OVRD_IN_HI(0), data);
-+	if (ret)
-+		goto err_phy_trans;
-+
-+	/*
-+	 * Set EQ and TX launch amplitudes as follows
-+	 * LANE0.TX_OVRD_DRV_LO.PREEMPH set based on SoC version
-+	 * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 110
-+	 * LANE0.TX_OVRD_DRV_LO.EN set to 1.
-+	 */
-+	ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base,
-+		SSPHY_CTRL_TX_OVRD_DRV_LO(0), &data);
-+	if (ret)
-+		goto err_phy_trans;
-+
-+	data &= ~TX_OVRD_DRV_LO_PREEMPH_MASK;
-+	data |= phy_dwc3->tx_deamp_3_5db << TX_OVRD_DRV_LO_PREEMPH_SHIFT;
-+	data &= ~TX_OVRD_DRV_LO_AMPLITUDE_MASK;
-+	data |= 0x6E;
-+	data |= TX_OVRD_DRV_LO_EN;
-+	ret = qcom_dwc3_ss_write_phycreg(phy_dwc3,
-+		SSPHY_CTRL_TX_OVRD_DRV_LO(0), data);
-+	if (ret)
-+		goto err_phy_trans;
-+
-+	qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x30, phy_dwc3->mpll);
-+
-+	/*
-+	 * Set the QSCRATCH PHY_PARAM_CTRL1 parameters as follows
-+	 * TX_FULL_SWING [26:20] amplitude to 110
-+	 * TX_DEEMPH_6DB [19:14] to 32
-+	 * TX_DEEMPH_3_5DB [13:8] set based on SoC version
-+	 * LOS_BIAS [7:3] to 9
-+	 */
-+	regmap_read(phy_dwc3->base, SSUSB_PHY_PARAM_CTRL_1, &data);
-+
-+	data &= ~PHY_PARAM_CTRL1_MASK;
-+
-+	data |= PHY_PARAM_CTRL1_TX_FULL_SWING(0x6e) |
-+		PHY_PARAM_CTRL1_TX_DEEMPH_6DB(0x20) |
-+		PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(phy_dwc3->tx_deamp_3_5db) |
-+		PHY_PARAM_CTRL1_LOS_BIAS(0x9);
-+
-+	qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_PARAM_CTRL_1,
-+				     PHY_PARAM_CTRL1_MASK, data);
-+
-+err_phy_trans:
-+	return ret;
-+}
-+
-+static int qcom_dwc3_ss_phy_exit(struct phy *phy)
-+{
-+	struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
-+
-+	/* Sequence to put SSPHY in low power state:
-+	 * 1. Clear REF_PHY_EN in PHY_CTRL_REG
-+	 * 2. Clear REF_USE_PAD in PHY_CTRL_REG
-+	 * 3. Set TEST_POWERED_DOWN in PHY_CTRL_REG to enable PHY retention
-+	 */
-+	qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
-+		SSUSB_CTRL_SS_PHY_EN, 0x0);
-+	qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
-+		SSUSB_CTRL_REF_USE_PAD, 0x0);
-+	qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
-+		SSUSB_CTRL_TEST_POWERDOWN, 0x0);
-+
-+	clk_disable_unprepare(phy_dwc3->ref_clk);
-+	clk_disable_unprepare(phy_dwc3->xo_clk);
-+
-+	return 0;
-+}
-+
-+static const struct qcom_dwc3_phy_drvdata qcom_dwc3_hs_drvdata = {
-+	.ops = {
-+		.init		= qcom_dwc3_hs_phy_init,
-+		.exit		= qcom_dwc3_hs_phy_exit,
-+		.owner		= THIS_MODULE,
-+	},
-+	.clk_rate = 60000000,
-+};
-+
-+static const struct qcom_dwc3_phy_drvdata qcom_dwc3_ss_drvdata = {
-+	.ops = {
-+		.init		= qcom_dwc3_ss_phy_init,
-+		.exit		= qcom_dwc3_ss_phy_exit,
-+		.owner		= THIS_MODULE,
-+	},
-+	.clk_rate = 125000000,
-+};
-+
-+static const struct of_device_id qcom_dwc3_phy_table[] = {
-+	{ .compatible = "qcom,dwc3-hs-usb-phy", .data = &qcom_dwc3_hs_drvdata },
-+	{ .compatible = "qcom,dwc3-ss-usb-phy", .data = &qcom_dwc3_ss_drvdata },
-+	{ /* Sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, qcom_dwc3_phy_table);
-+
-+static int qcom_dwc3_phy_probe(struct platform_device *pdev)
-+{
-+	struct qcom_dwc3_usb_phy	*phy_dwc3;
-+	struct phy_provider		*phy_provider;
-+	struct phy			*generic_phy;
-+	struct resource			*res;
-+	const struct of_device_id *match;
-+	const struct qcom_dwc3_phy_drvdata *data;
-+	struct device_node *np;
-+
-+	phy_dwc3 = devm_kzalloc(&pdev->dev, sizeof(*phy_dwc3), GFP_KERNEL);
-+	if (!phy_dwc3)
-+		return -ENOMEM;
-+
-+	match = of_match_node(qcom_dwc3_phy_table, pdev->dev.of_node);
-+	data = match->data;
-+
-+	phy_dwc3->dev = &pdev->dev;
-+
-+	phy_dwc3->base = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "regmap");
-+	if (IS_ERR_OR_NULL(phy_dwc3->base))
-+		return PTR_ERR_OR_ZERO(phy_dwc3->base) ? : -EINVAL;
-+
-+	phy_dwc3->ref_clk = devm_clk_get(phy_dwc3->dev, "ref");
-+	if (IS_ERR(phy_dwc3->ref_clk)) {
-+		dev_dbg(phy_dwc3->dev, "cannot get reference clock\n");
-+		return PTR_ERR(phy_dwc3->ref_clk);
-+	}
-+
-+	clk_set_rate(phy_dwc3->ref_clk, data->clk_rate);
-+
-+	phy_dwc3->xo_clk = devm_clk_get(phy_dwc3->dev, "xo");
-+	if (IS_ERR(phy_dwc3->xo_clk)) {
-+		dev_dbg(phy_dwc3->dev, "cannot get TCXO clock\n");
-+		phy_dwc3->xo_clk = NULL;
-+	}
-+
-+	/* Parse device node to probe HSIO settings */
-+	np = of_node_get(pdev->dev.of_node);
-+	if (!of_compat_cmp(match->compatible, "qcom,dwc3-ss-usb-phy",
-+			   strlen(match->compatible))) {
-+
-+		if (of_property_read_u32(np, "rx_eq", &phy_dwc3->rx_eq) ||
-+		    of_property_read_u32(np, "tx_deamp_3_5db",
-+					 &phy_dwc3->tx_deamp_3_5db) ||
-+		    of_property_read_u32(np, "mpll", &phy_dwc3->mpll)) {
-+
-+			dev_err(phy_dwc3->dev, "cannot get HSIO settings from device node, using default values\n");
-+
-+			/* Default HSIO settings */
-+			phy_dwc3->rx_eq = SSPHY_RX_EQ_VALUE;
-+			phy_dwc3->tx_deamp_3_5db = SSPHY_TX_DEEMPH_3_5DB;
-+			phy_dwc3->mpll = SSPHY_MPLL_VALUE;
-+		}
-+	}
-+
-+	generic_phy = devm_phy_create(phy_dwc3->dev, pdev->dev.of_node,
-+				      &data->ops);
-+
-+	if (IS_ERR(generic_phy))
-+		return PTR_ERR(generic_phy);
-+
-+	phy_set_drvdata(generic_phy, phy_dwc3);
-+	platform_set_drvdata(pdev, phy_dwc3);
-+
-+	phy_provider = devm_of_phy_provider_register(phy_dwc3->dev,
-+			of_phy_simple_xlate);
-+
-+	if (IS_ERR(phy_provider))
-+		return PTR_ERR(phy_provider);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver qcom_dwc3_phy_driver = {
-+	.probe		= qcom_dwc3_phy_probe,
-+	.driver		= {
-+		.name	= "qcom-dwc3-usb-phy",
-+		.owner	= THIS_MODULE,
-+		.of_match_table = qcom_dwc3_phy_table,
-+	},
-+};
-+
-+module_platform_driver(qcom_dwc3_phy_driver);
-+
-+MODULE_ALIAS("platform:phy-qcom-dwc3");
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
-+MODULE_AUTHOR("Ivan T. Ivanov <iivanov@mm-sol.com>");
-+MODULE_DESCRIPTION("DesignWare USB3 QCOM PHY driver");
diff --git a/target/linux/ipq806x/patches-5.4/0077-phy-dwc3-qcom-fix-kernel-5_4.patch b/target/linux/ipq806x/patches-5.4/0077-phy-dwc3-qcom-fix-kernel-5_4.patch
deleted file mode 100644
index 11893ea11f..0000000000
--- a/target/linux/ipq806x/patches-5.4/0077-phy-dwc3-qcom-fix-kernel-5_4.patch
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/drivers/phy/qualcomm/phy-qcom-dwc3.c
-+++ b/drivers/phy/qualcomm/phy-qcom-dwc3.c
-@@ -491,7 +491,6 @@ static int qcom_dwc3_phy_probe(struct pl
- 	struct qcom_dwc3_usb_phy	*phy_dwc3;
- 	struct phy_provider		*phy_provider;
- 	struct phy			*generic_phy;
--	struct resource			*res;
- 	const struct of_device_id *match;
- 	const struct qcom_dwc3_phy_drvdata *data;
- 	struct device_node *np;
-@@ -505,7 +504,17 @@ static int qcom_dwc3_phy_probe(struct pl
- 
- 	phy_dwc3->dev = &pdev->dev;
- 
--	phy_dwc3->base = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "regmap");
-+	np = of_parse_phandle(pdev->dev.of_node, "regmap", 0);
-+	if (!np)
-+		return -ENODEV;
-+
-+	if (!of_device_is_compatible(np, "syscon"))
-+		return -EINVAL;
-+
-+	phy_dwc3->base = device_node_to_regmap(np);
-+
-+	of_node_put(np);
-+
- 	if (IS_ERR_OR_NULL(phy_dwc3->base))
- 		return PTR_ERR_OR_ZERO(phy_dwc3->base) ? : -EINVAL;
- 
diff --git a/target/linux/ipq806x/patches-5.4/083-ipq8064-dtsi-additions.patch b/target/linux/ipq806x/patches-5.4/083-ipq8064-dtsi-additions.patch
index bd3c972f5c..9db5190dae 100644
--- a/target/linux/ipq806x/patches-5.4/083-ipq8064-dtsi-additions.patch
+++ b/target/linux/ipq806x/patches-5.4/083-ipq8064-dtsi-additions.patch
@@ -718,16 +718,16 @@
 +		};
 +
 +		hs_phy_0: hs_phy_0 {
-+			compatible = "qcom,dwc3-hs-usb-phy";
-+			regmap = <&usb3_0>;
++			compatible = "qcom,ipq806x-usb-phy-hs";
++			reg = <0x110f8800 0x30>;
 +			clocks = <&gcc USB30_0_UTMI_CLK>;
 +			clock-names = "ref";
 +			#phy-cells = <0>;
 +		};
 +
 +		ss_phy_0: ss_phy_0 {
-+			compatible = "qcom,dwc3-ss-usb-phy";
-+			regmap = <&usb3_0>;
++			compatible = "qcom,ipq806x-usb-phy-ss";
++			reg = <0x110f8830 0x30>;
 +			clocks = <&gcc USB30_0_MASTER_CLK>;
 +			clock-names = "ref";
 +			#phy-cells = <0>;
@@ -760,16 +760,16 @@
 +		};
 +
 +		hs_phy_1: hs_phy_1 {
-+			compatible = "qcom,dwc3-hs-usb-phy";
-+			regmap = <&usb3_1>;
++			compatible = "qcom,ipq806x-usb-phy-hs";
++			reg = <0x100f8800 0x30>;
 +			clocks = <&gcc USB30_1_UTMI_CLK>;
 +			clock-names = "ref";
 +			#phy-cells = <0>;
 +		};
 +
 +		ss_phy_1: ss_phy_1 {
-+			compatible = "qcom,dwc3-ss-usb-phy";
-+			regmap = <&usb3_1>;
++			compatible = "qcom,ipq806x-usb-phy-ss";
++			reg = <0x100f8830 0x30>;
 +			clocks = <&gcc USB30_1_MASTER_CLK>;
 +			clock-names = "ref";
 +			#phy-cells = <0>;
diff --git a/target/linux/ipq806x/patches-5.4/095-1-v5.9-phy-qualcomm-add-qcom-ipq806x-dwc-usb-phy-driver.patch b/target/linux/ipq806x/patches-5.4/095-1-v5.9-phy-qualcomm-add-qcom-ipq806x-dwc-usb-phy-driver.patch
new file mode 100644
index 0000000000..47dc455715
--- /dev/null
+++ b/target/linux/ipq806x/patches-5.4/095-1-v5.9-phy-qualcomm-add-qcom-ipq806x-dwc-usb-phy-driver.patch
@@ -0,0 +1,621 @@
+From ef19b117b83466e1c030368101a24367a34be7f0 Mon Sep 17 00:00:00 2001
+From: Ansuel Smith <ansuelsmth@gmail.com>
+Date: Fri, 17 Jul 2020 15:16:31 +0200
+Subject: phy: qualcomm: add qcom ipq806x dwc usb phy driver
+
+This has lost in the original push for the dwc3 qcom driver.
+This is needed for ipq806x SoC as without this the usb ports
+doesn't work at all.
+
+Signed-off-by: Andy Gross <agross@codeaurora.org>
+Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
+Tested-by: Jonathan McDowell <noodles@earth.li>
+Link: https://lore.kernel.org/r/20200717131635.11076-1-ansuelsmth@gmail.com
+Signed-off-by: Vinod Koul <vkoul@kernel.org>
+---
+
+Light modification to Kconfig as some config are missing in kernel 5.4
+
+ drivers/phy/qualcomm/Kconfig                |  10 +
+ drivers/phy/qualcomm/Makefile               |   1 +
+ drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c | 571 ++++++++++++++++++++++++++++
+ 3 files changed, 582 insertions(+)
+ create mode 100644 drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
+
+--- a/drivers/phy/qualcomm/Kconfig
++++ b/drivers/phy/qualcomm/Kconfig
+@@ -91,3 +91,13 @@ config PHY_QCOM_USB_HSIC
+ 	select GENERIC_PHY
+ 	help
+ 	  Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
++
++config PHY_QCOM_IPQ806X_USB
++	tristate "Qualcomm IPQ806x DWC3 USB PHY driver"
++	depends on HAS_IOMEM
++	depends on OF && (ARCH_QCOM || COMPILE_TEST)
++	select GENERIC_PHY
++	help
++	  This option enables support for the Synopsis PHYs present inside the
++	  Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports
++	  both HS and SS PHY controllers.
+--- a/drivers/phy/qualcomm/Makefile
++++ b/drivers/phy/qualcomm/Makefile
+@@ -10,3 +10,4 @@ obj-$(CONFIG_PHY_QCOM_UFS_14NM)		+= phy-
+ obj-$(CONFIG_PHY_QCOM_UFS_20NM)		+= phy-qcom-ufs-qmp-20nm.o
+ obj-$(CONFIG_PHY_QCOM_USB_HS) 		+= phy-qcom-usb-hs.o
+ obj-$(CONFIG_PHY_QCOM_USB_HSIC) 	+= phy-qcom-usb-hsic.o
++obj-$(CONFIG_PHY_QCOM_IPQ806X_USB)		+= phy-qcom-ipq806x-usb.o
+--- /dev/null
++++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
+@@ -0,0 +1,571 @@
++// SPDX-License-Identifier: GPL-2.0-only
++
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/module.h>
++#include <linux/of_device.h>
++#include <linux/phy/phy.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++#include <linux/regmap.h>
++#include <linux/mfd/syscon.h>
++
++/* USB QSCRATCH Hardware registers */
++#define QSCRATCH_GENERAL_CFG		(0x08)
++#define HSUSB_PHY_CTRL_REG		(0x10)
++
++/* PHY_CTRL_REG */
++#define HSUSB_CTRL_DMSEHV_CLAMP		BIT(24)
++#define HSUSB_CTRL_USB2_SUSPEND		BIT(23)
++#define HSUSB_CTRL_UTMI_CLK_EN		BIT(21)
++#define HSUSB_CTRL_UTMI_OTG_VBUS_VALID	BIT(20)
++#define HSUSB_CTRL_USE_CLKCORE		BIT(18)
++#define HSUSB_CTRL_DPSEHV_CLAMP		BIT(17)
++#define HSUSB_CTRL_COMMONONN		BIT(11)
++#define HSUSB_CTRL_ID_HV_CLAMP		BIT(9)
++#define HSUSB_CTRL_OTGSESSVLD_CLAMP	BIT(8)
++#define HSUSB_CTRL_CLAMP_EN		BIT(7)
++#define HSUSB_CTRL_RETENABLEN		BIT(1)
++#define HSUSB_CTRL_POR			BIT(0)
++
++/* QSCRATCH_GENERAL_CFG */
++#define HSUSB_GCFG_XHCI_REV		BIT(2)
++
++/* USB QSCRATCH Hardware registers */
++#define SSUSB_PHY_CTRL_REG		(0x00)
++#define SSUSB_PHY_PARAM_CTRL_1		(0x04)
++#define SSUSB_PHY_PARAM_CTRL_2		(0x08)
++#define CR_PROTOCOL_DATA_IN_REG		(0x0c)
++#define CR_PROTOCOL_DATA_OUT_REG	(0x10)
++#define CR_PROTOCOL_CAP_ADDR_REG	(0x14)
++#define CR_PROTOCOL_CAP_DATA_REG	(0x18)
++#define CR_PROTOCOL_READ_REG		(0x1c)
++#define CR_PROTOCOL_WRITE_REG		(0x20)
++
++/* PHY_CTRL_REG */
++#define SSUSB_CTRL_REF_USE_PAD		BIT(28)
++#define SSUSB_CTRL_TEST_POWERDOWN	BIT(27)
++#define SSUSB_CTRL_LANE0_PWR_PRESENT	BIT(24)
++#define SSUSB_CTRL_SS_PHY_EN		BIT(8)
++#define SSUSB_CTRL_SS_PHY_RESET		BIT(7)
++
++/* SSPHY control registers - Does this need 0x30? */
++#define SSPHY_CTRL_RX_OVRD_IN_HI(lane)	(0x1006 + 0x100 * (lane))
++#define SSPHY_CTRL_TX_OVRD_DRV_LO(lane)	(0x1002 + 0x100 * (lane))
++
++/* SSPHY SoC version specific values */
++#define SSPHY_RX_EQ_VALUE		4 /* Override value for rx_eq */
++/* Override value for transmit preemphasis */
++#define SSPHY_TX_DEEMPH_3_5DB		23
++/* Override value for mpll */
++#define SSPHY_MPLL_VALUE		0
++
++/* QSCRATCH PHY_PARAM_CTRL1 fields */
++#define PHY_PARAM_CTRL1_TX_FULL_SWING_MASK	GENMASK(26, 19)
++#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK	GENMASK(19, 13)
++#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK	GENMASK(13, 7)
++#define PHY_PARAM_CTRL1_LOS_BIAS_MASK		GENMASK(7, 2)
++
++#define PHY_PARAM_CTRL1_MASK				\
++		(PHY_PARAM_CTRL1_TX_FULL_SWING_MASK |	\
++		 PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK |	\
++		 PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK |	\
++		 PHY_PARAM_CTRL1_LOS_BIAS_MASK)
++
++#define PHY_PARAM_CTRL1_TX_FULL_SWING(x)	\
++		(((x) << 20) & PHY_PARAM_CTRL1_TX_FULL_SWING_MASK)
++#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB(x)	\
++		(((x) << 14) & PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK)
++#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(x)	\
++		(((x) <<  8) & PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK)
++#define PHY_PARAM_CTRL1_LOS_BIAS(x)	\
++		(((x) <<  3) & PHY_PARAM_CTRL1_LOS_BIAS_MASK)
++
++/* RX OVRD IN HI bits */
++#define RX_OVRD_IN_HI_RX_RESET_OVRD		BIT(13)
++#define RX_OVRD_IN_HI_RX_RX_RESET		BIT(12)
++#define RX_OVRD_IN_HI_RX_EQ_OVRD		BIT(11)
++#define RX_OVRD_IN_HI_RX_EQ_MASK		GENMASK(10, 7)
++#define RX_OVRD_IN_HI_RX_EQ(x)			((x) << 8)
++#define RX_OVRD_IN_HI_RX_EQ_EN_OVRD		BIT(7)
++#define RX_OVRD_IN_HI_RX_EQ_EN			BIT(6)
++#define RX_OVRD_IN_HI_RX_LOS_FILTER_OVRD	BIT(5)
++#define RX_OVRD_IN_HI_RX_LOS_FILTER_MASK	GENMASK(4, 2)
++#define RX_OVRD_IN_HI_RX_RATE_OVRD		BIT(2)
++#define RX_OVRD_IN_HI_RX_RATE_MASK		GENMASK(2, 0)
++
++/* TX OVRD DRV LO register bits */
++#define TX_OVRD_DRV_LO_AMPLITUDE_MASK		GENMASK(6, 0)
++#define TX_OVRD_DRV_LO_PREEMPH_MASK		GENMASK(13, 6)
++#define TX_OVRD_DRV_LO_PREEMPH(x)		((x) << 7)
++#define TX_OVRD_DRV_LO_EN			BIT(14)
++
++/* MPLL bits */
++#define SSPHY_MPLL_MASK				GENMASK(8, 5)
++#define SSPHY_MPLL(x)				((x) << 5)
++
++/* SS CAP register bits */
++#define SS_CR_CAP_ADDR_REG			BIT(0)
++#define SS_CR_CAP_DATA_REG			BIT(0)
++#define SS_CR_READ_REG				BIT(0)
++#define SS_CR_WRITE_REG				BIT(0)
++
++struct usb_phy {
++	void __iomem		*base;
++	struct device		*dev;
++	struct clk		*xo_clk;
++	struct clk		*ref_clk;
++	u32			rx_eq;
++	u32			tx_deamp_3_5db;
++	u32			mpll;
++};
++
++struct phy_drvdata {
++	struct phy_ops	ops;
++	u32		clk_rate;
++};
++
++/**
++ * Write register and read back masked value to confirm it is written
++ *
++ * @base - QCOM DWC3 PHY base virtual address.
++ * @offset - register offset.
++ * @mask - register bitmask specifying what should be updated
++ * @val - value to write.
++ */
++static inline void usb_phy_write_readback(struct usb_phy *phy_dwc3,
++					  u32 offset,
++					  const u32 mask, u32 val)
++{
++	u32 write_val, tmp = readl(phy_dwc3->base + offset);
++
++	tmp &= ~mask;		/* retain other bits */
++	write_val = tmp | val;
++
++	writel(write_val, phy_dwc3->base + offset);
++
++	/* Read back to see if val was written */
++	tmp = readl(phy_dwc3->base + offset);
++	tmp &= mask;		/* clear other bits */
++
++	if (tmp != val)
++		dev_err(phy_dwc3->dev, "write: %x to QSCRATCH: %x FAILED\n", val, offset);
++}
++
++static int wait_for_latch(void __iomem *addr)
++{
++	u32 retry = 10;
++
++	while (true) {
++		if (!readl(addr))
++			break;
++
++		if (--retry == 0)
++			return -ETIMEDOUT;
++
++		usleep_range(10, 20);
++	}
++
++	return 0;
++}
++
++/**
++ * Write SSPHY register
++ *
++ * @base - QCOM DWC3 PHY base virtual address.
++ * @addr - SSPHY address to write.
++ * @val - value to write.
++ */
++static int usb_ss_write_phycreg(struct usb_phy *phy_dwc3,
++				u32 addr, u32 val)
++{
++	int ret;
++
++	writel(addr, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
++	writel(SS_CR_CAP_ADDR_REG,
++	       phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
++
++	ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
++	if (ret)
++		goto err_wait;
++
++	writel(val, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
++	writel(SS_CR_CAP_DATA_REG,
++	       phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG);
++
++	ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG);
++	if (ret)
++		goto err_wait;
++
++	writel(SS_CR_WRITE_REG, phy_dwc3->base + CR_PROTOCOL_WRITE_REG);
++
++	ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_WRITE_REG);
++
++err_wait:
++	if (ret)
++		dev_err(phy_dwc3->dev, "timeout waiting for latch\n");
++	return ret;
++}
++
++/**
++ * Read SSPHY register.
++ *
++ * @base - QCOM DWC3 PHY base virtual address.
++ * @addr - SSPHY address to read.
++ */
++static int usb_ss_read_phycreg(struct usb_phy *phy_dwc3,
++			       u32 addr, u32 *val)
++{
++	int ret;
++
++	writel(addr, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
++	writel(SS_CR_CAP_ADDR_REG,
++	       phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
++
++	ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
++	if (ret)
++		goto err_wait;
++
++	/*
++	 * Due to hardware bug, first read of SSPHY register might be
++	 * incorrect. Hence as workaround, SW should perform SSPHY register
++	 * read twice, but use only second read and ignore first read.
++	 */
++	writel(SS_CR_READ_REG, phy_dwc3->base + CR_PROTOCOL_READ_REG);
++
++	ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_READ_REG);
++	if (ret)
++		goto err_wait;
++
++	/* throwaway read */
++	readl(phy_dwc3->base + CR_PROTOCOL_DATA_OUT_REG);
++
++	writel(SS_CR_READ_REG, phy_dwc3->base + CR_PROTOCOL_READ_REG);
++
++	ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_READ_REG);
++	if (ret)
++		goto err_wait;
++
++	*val = readl(phy_dwc3->base + CR_PROTOCOL_DATA_OUT_REG);
++
++err_wait:
++	return ret;
++}
++
++static int qcom_ipq806x_usb_hs_phy_init(struct phy *phy)
++{
++	struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
++	int ret;
++	u32 val;
++
++	ret = clk_prepare_enable(phy_dwc3->xo_clk);
++	if (ret)
++		return ret;
++
++	ret = clk_prepare_enable(phy_dwc3->ref_clk);
++	if (ret) {
++		clk_disable_unprepare(phy_dwc3->xo_clk);
++		return ret;
++	}
++
++	/*
++	 * HSPHY Initialization: Enable UTMI clock, select 19.2MHz fsel
++	 * enable clamping, and disable RETENTION (power-on default is ENABLED)
++	 */
++	val = HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_DMSEHV_CLAMP |
++		HSUSB_CTRL_RETENABLEN  | HSUSB_CTRL_COMMONONN |
++		HSUSB_CTRL_OTGSESSVLD_CLAMP | HSUSB_CTRL_ID_HV_CLAMP |
++		HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_UTMI_OTG_VBUS_VALID |
++		HSUSB_CTRL_UTMI_CLK_EN | HSUSB_CTRL_CLAMP_EN | 0x70;
++
++	/* use core clock if external reference is not present */
++	if (!phy_dwc3->xo_clk)
++		val |= HSUSB_CTRL_USE_CLKCORE;
++
++	writel(val, phy_dwc3->base + HSUSB_PHY_CTRL_REG);
++	usleep_range(2000, 2200);
++
++	/* Disable (bypass) VBUS and ID filters */
++	writel(HSUSB_GCFG_XHCI_REV, phy_dwc3->base + QSCRATCH_GENERAL_CFG);
++
++	return 0;
++}
++
++static int qcom_ipq806x_usb_hs_phy_exit(struct phy *phy)
++{
++	struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
++
++	clk_disable_unprepare(phy_dwc3->ref_clk);
++	clk_disable_unprepare(phy_dwc3->xo_clk);
++
++	return 0;
++}
++
++static int qcom_ipq806x_usb_ss_phy_init(struct phy *phy)
++{
++	struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
++	int ret;
++	u32 data;
++
++	ret = clk_prepare_enable(phy_dwc3->xo_clk);
++	if (ret)
++		return ret;
++
++	ret = clk_prepare_enable(phy_dwc3->ref_clk);
++	if (ret) {
++		clk_disable_unprepare(phy_dwc3->xo_clk);
++		return ret;
++	}
++
++	/* reset phy */
++	data = readl(phy_dwc3->base + SSUSB_PHY_CTRL_REG);
++	writel(data | SSUSB_CTRL_SS_PHY_RESET,
++	       phy_dwc3->base + SSUSB_PHY_CTRL_REG);
++	usleep_range(2000, 2200);
++	writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
++
++	/* clear REF_PAD if we don't have XO clk */
++	if (!phy_dwc3->xo_clk)
++		data &= ~SSUSB_CTRL_REF_USE_PAD;
++	else
++		data |= SSUSB_CTRL_REF_USE_PAD;
++
++	writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
++
++	/* wait for ref clk to become stable, this can take up to 30ms */
++	msleep(30);
++
++	data |= SSUSB_CTRL_SS_PHY_EN | SSUSB_CTRL_LANE0_PWR_PRESENT;
++	writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
++
++	/*
++	 * WORKAROUND: There is SSPHY suspend bug due to which USB enumerates
++	 * in HS mode instead of SS mode. Workaround it by asserting
++	 * LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus mode
++	 */
++	ret = usb_ss_read_phycreg(phy_dwc3, 0x102D, &data);
++	if (ret)
++		goto err_phy_trans;
++
++	data |= (1 << 7);
++	ret = usb_ss_write_phycreg(phy_dwc3, 0x102D, data);
++	if (ret)
++		goto err_phy_trans;
++
++	ret = usb_ss_read_phycreg(phy_dwc3, 0x1010, &data);
++	if (ret)
++		goto err_phy_trans;
++
++	data &= ~0xff0;
++	data |= 0x20;
++	ret = usb_ss_write_phycreg(phy_dwc3, 0x1010, data);
++	if (ret)
++		goto err_phy_trans;
++
++	/*
++	 * Fix RX Equalization setting as follows
++	 * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0
++	 * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1
++	 * LANE0.RX_OVRD_IN_HI.RX_EQ set based on SoC version
++	 * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1
++	 */
++	ret = usb_ss_read_phycreg(phy_dwc3, SSPHY_CTRL_RX_OVRD_IN_HI(0), &data);
++	if (ret)
++		goto err_phy_trans;
++
++	data &= ~RX_OVRD_IN_HI_RX_EQ_EN;
++	data |= RX_OVRD_IN_HI_RX_EQ_EN_OVRD;
++	data &= ~RX_OVRD_IN_HI_RX_EQ_MASK;
++	data |= RX_OVRD_IN_HI_RX_EQ(phy_dwc3->rx_eq);
++	data |= RX_OVRD_IN_HI_RX_EQ_OVRD;
++	ret = usb_ss_write_phycreg(phy_dwc3,
++				   SSPHY_CTRL_RX_OVRD_IN_HI(0), data);
++	if (ret)
++		goto err_phy_trans;
++
++	/*
++	 * Set EQ and TX launch amplitudes as follows
++	 * LANE0.TX_OVRD_DRV_LO.PREEMPH set based on SoC version
++	 * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 110
++	 * LANE0.TX_OVRD_DRV_LO.EN set to 1.
++	 */
++	ret = usb_ss_read_phycreg(phy_dwc3,
++				  SSPHY_CTRL_TX_OVRD_DRV_LO(0), &data);
++	if (ret)
++		goto err_phy_trans;
++
++	data &= ~TX_OVRD_DRV_LO_PREEMPH_MASK;
++	data |= TX_OVRD_DRV_LO_PREEMPH(phy_dwc3->tx_deamp_3_5db);
++	data &= ~TX_OVRD_DRV_LO_AMPLITUDE_MASK;
++	data |= 0x6E;
++	data |= TX_OVRD_DRV_LO_EN;
++	ret = usb_ss_write_phycreg(phy_dwc3,
++				   SSPHY_CTRL_TX_OVRD_DRV_LO(0), data);
++	if (ret)
++		goto err_phy_trans;
++
++	data = 0;
++	data &= ~SSPHY_MPLL_MASK;
++	data |= SSPHY_MPLL(phy_dwc3->mpll);
++	usb_ss_write_phycreg(phy_dwc3, 0x30, data);
++
++	/*
++	 * Set the QSCRATCH PHY_PARAM_CTRL1 parameters as follows
++	 * TX_FULL_SWING [26:20] amplitude to 110
++	 * TX_DEEMPH_6DB [19:14] to 32
++	 * TX_DEEMPH_3_5DB [13:8] set based on SoC version
++	 * LOS_BIAS [7:3] to 9
++	 */
++	data = readl(phy_dwc3->base + SSUSB_PHY_PARAM_CTRL_1);
++
++	data &= ~PHY_PARAM_CTRL1_MASK;
++
++	data |= PHY_PARAM_CTRL1_TX_FULL_SWING(0x6e) |
++		PHY_PARAM_CTRL1_TX_DEEMPH_6DB(0x20) |
++		PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(phy_dwc3->tx_deamp_3_5db) |
++		PHY_PARAM_CTRL1_LOS_BIAS(0x9);
++
++	usb_phy_write_readback(phy_dwc3, SSUSB_PHY_PARAM_CTRL_1,
++			       PHY_PARAM_CTRL1_MASK, data);
++
++err_phy_trans:
++	return ret;
++}
++
++static int qcom_ipq806x_usb_ss_phy_exit(struct phy *phy)
++{
++	struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
++
++	/* Sequence to put SSPHY in low power state:
++	 * 1. Clear REF_PHY_EN in PHY_CTRL_REG
++	 * 2. Clear REF_USE_PAD in PHY_CTRL_REG
++	 * 3. Set TEST_POWERED_DOWN in PHY_CTRL_REG to enable PHY retention
++	 */
++	usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
++			       SSUSB_CTRL_SS_PHY_EN, 0x0);
++	usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
++			       SSUSB_CTRL_REF_USE_PAD, 0x0);
++	usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
++			       SSUSB_CTRL_TEST_POWERDOWN, 0x0);
++
++	clk_disable_unprepare(phy_dwc3->ref_clk);
++	clk_disable_unprepare(phy_dwc3->xo_clk);
++
++	return 0;
++}
++
++static const struct phy_drvdata qcom_ipq806x_usb_hs_drvdata = {
++	.ops = {
++		.init		= qcom_ipq806x_usb_hs_phy_init,
++		.exit		= qcom_ipq806x_usb_hs_phy_exit,
++		.owner		= THIS_MODULE,
++	},
++	.clk_rate = 60000000,
++};
++
++static const struct phy_drvdata qcom_ipq806x_usb_ss_drvdata = {
++	.ops = {
++		.init		= qcom_ipq806x_usb_ss_phy_init,
++		.exit		= qcom_ipq806x_usb_ss_phy_exit,
++		.owner		= THIS_MODULE,
++	},
++	.clk_rate = 125000000,
++};
++
++static const struct of_device_id qcom_ipq806x_usb_phy_table[] = {
++	{ .compatible = "qcom,ipq806x-usb-phy-hs",
++	  .data = &qcom_ipq806x_usb_hs_drvdata },
++	{ .compatible = "qcom,ipq806x-usb-phy-ss",
++	  .data = &qcom_ipq806x_usb_ss_drvdata },
++	{ /* Sentinel */ }
++};
++MODULE_DEVICE_TABLE(of, qcom_ipq806x_usb_phy_table);
++
++static int qcom_ipq806x_usb_phy_probe(struct platform_device *pdev)
++{
++	struct resource *res;
++	resource_size_t size;
++	struct phy *generic_phy;
++	struct usb_phy *phy_dwc3;
++	const struct phy_drvdata *data;
++	struct phy_provider *phy_provider;
++
++	phy_dwc3 = devm_kzalloc(&pdev->dev, sizeof(*phy_dwc3), GFP_KERNEL);
++	if (!phy_dwc3)
++		return -ENOMEM;
++
++	data = of_device_get_match_data(&pdev->dev);
++
++	phy_dwc3->dev = &pdev->dev;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res)
++		return -EINVAL;
++	size = resource_size(res);
++	phy_dwc3->base = devm_ioremap(phy_dwc3->dev, res->start, size);
++
++	if (IS_ERR(phy_dwc3->base)) {
++		dev_err(phy_dwc3->dev, "failed to map reg\n");
++		return PTR_ERR(phy_dwc3->base);
++	}
++
++	phy_dwc3->ref_clk = devm_clk_get(phy_dwc3->dev, "ref");
++	if (IS_ERR(phy_dwc3->ref_clk)) {
++		dev_dbg(phy_dwc3->dev, "cannot get reference clock\n");
++		return PTR_ERR(phy_dwc3->ref_clk);
++	}
++
++	clk_set_rate(phy_dwc3->ref_clk, data->clk_rate);
++
++	phy_dwc3->xo_clk = devm_clk_get(phy_dwc3->dev, "xo");
++	if (IS_ERR(phy_dwc3->xo_clk)) {
++		dev_dbg(phy_dwc3->dev, "cannot get TCXO clock\n");
++		phy_dwc3->xo_clk = NULL;
++	}
++
++	/* Parse device node to probe HSIO settings */
++	if (device_property_read_u32(&pdev->dev, "qcom,rx-eq",
++				     &phy_dwc3->rx_eq))
++		phy_dwc3->rx_eq = SSPHY_RX_EQ_VALUE;
++
++	if (device_property_read_u32(&pdev->dev, "qcom,tx-deamp_3_5db",
++				     &phy_dwc3->tx_deamp_3_5db))
++		phy_dwc3->rx_eq = SSPHY_TX_DEEMPH_3_5DB;
++
++	if (device_property_read_u32(&pdev->dev, "qcom,mpll", &phy_dwc3->mpll))
++		phy_dwc3->mpll = SSPHY_MPLL_VALUE;
++
++	generic_phy = devm_phy_create(phy_dwc3->dev, pdev->dev.of_node, &data->ops);
++
++	if (IS_ERR(generic_phy))
++		return PTR_ERR(generic_phy);
++
++	phy_set_drvdata(generic_phy, phy_dwc3);
++	platform_set_drvdata(pdev, phy_dwc3);
++
++	phy_provider = devm_of_phy_provider_register(phy_dwc3->dev,
++						     of_phy_simple_xlate);
++
++	if (IS_ERR(phy_provider))
++		return PTR_ERR(phy_provider);
++
++	return 0;
++}
++
++static struct platform_driver qcom_ipq806x_usb_phy_driver = {
++	.probe		= qcom_ipq806x_usb_phy_probe,
++	.driver		= {
++		.name	= "qcom-ipq806x-usb-phy",
++		.owner	= THIS_MODULE,
++		.of_match_table = qcom_ipq806x_usb_phy_table,
++	},
++};
++
++module_platform_driver(qcom_ipq806x_usb_phy_driver);
++
++MODULE_ALIAS("platform:phy-qcom-ipq806x-usb");
++MODULE_LICENSE("GPL v2");
++MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
++MODULE_AUTHOR("Ivan T. Ivanov <iivanov@mm-sol.com>");
++MODULE_DESCRIPTION("DesignWare USB3 QCOM PHY driver");
diff --git a/target/linux/ipq806x/patches-5.4/095-2-v5.9-phy-qualcomm-fix-setting-of-tx_deamp_3_5db-when-device-property-read-fails.patch b/target/linux/ipq806x/patches-5.4/095-2-v5.9-phy-qualcomm-fix-setting-of-tx_deamp_3_5db-when-device-property-read-fails.patch
new file mode 100644
index 0000000000..dedbb51049
--- /dev/null
+++ b/target/linux/ipq806x/patches-5.4/095-2-v5.9-phy-qualcomm-fix-setting-of-tx_deamp_3_5db-when-device-property-read-fails.patch
@@ -0,0 +1,31 @@
+From 3d7b0ca5300bd01b176f2b4c10e173db802560d8 Mon Sep 17 00:00:00 2001
+From: Colin Ian King <colin.king@canonical.com>
+Date: Tue, 21 Jul 2020 16:06:13 +0100
+Subject: phy: qualcomm: fix setting of tx_deamp_3_5db when device property
+ read fails
+
+Currently when reading of the device property for "qcom,tx-deamp_3_5db"
+fails the default is being assigned incorrectly to phy_dwc3->rx_eq. This
+looks like a copy-n-paste error and in fact should be assigning the
+default instead to phy_dwc3->tx_deamp_3_5db
+
+Addresses-Coverity: ("Copy-paste error")
+Fixes: ef19b117b834 ("phy: qualcomm: add qcom ipq806x dwc usb phy driver")
+Signed-off-by: Colin Ian King <colin.king@canonical.com>
+Link: https://lore.kernel.org/r/20200721150613.416876-1-colin.king@canonical.com
+Signed-off-by: Vinod Koul <vkoul@kernel.org>
+---
+ drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
++++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
+@@ -531,7 +531,7 @@ static int qcom_ipq806x_usb_phy_probe(st
+ 
+ 	if (device_property_read_u32(&pdev->dev, "qcom,tx-deamp_3_5db",
+ 				     &phy_dwc3->tx_deamp_3_5db))
+-		phy_dwc3->rx_eq = SSPHY_TX_DEEMPH_3_5DB;
++		phy_dwc3->tx_deamp_3_5db = SSPHY_TX_DEEMPH_3_5DB;
+ 
+ 	if (device_property_read_u32(&pdev->dev, "qcom,mpll", &phy_dwc3->mpll))
+ 		phy_dwc3->mpll = SSPHY_MPLL_VALUE;