aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorLuka Perkov <luka@openwrt.org>2014-05-12 12:29:22 +0000
committerLuka Perkov <luka@openwrt.org>2014-05-12 12:29:22 +0000
commitdce36465ad4b17274d9256b8e39b6d877bb4beff (patch)
tree8f78b9c143af56440f7d594fcaf363750c572473 /target/linux
parentaa3d844d34302f5ecb81b9987a800acb5024e8cb (diff)
downloadupstream-dce36465ad4b17274d9256b8e39b6d877bb4beff.tar.gz
upstream-dce36465ad4b17274d9256b8e39b6d877bb4beff.tar.bz2
upstream-dce36465ad4b17274d9256b8e39b6d877bb4beff.zip
imx6: drop support for 3.13
Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 40754
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/imx6/config-3.13362
-rw-r--r--target/linux/imx6/patches-3.13/0001-ARM-dts-disable-flexcan-by-default.patch31
-rw-r--r--target/linux/imx6/patches-3.13/0002-ARM-dts-added-several-new-imx-pinmux-groups.patch115
-rw-r--r--target/linux/imx6/patches-3.13/0003-ARM-dts-add-Gateworks-Ventana-support.patch2240
-rw-r--r--target/linux/imx6/patches-3.13/0004-imx-add-PCI-fixup-for-PEX860X-on-Gateworks-board.patch68
-rw-r--r--target/linux/imx6/patches-3.13/0005-PCI-designware-Fix-I-O-transfers-by-using-CPU-not-re.patch67
-rw-r--r--target/linux/imx6/patches-3.13/0050-sky2-allow-mac-to-come-from-dt.patch69
-rw-r--r--target/linux/imx6/patches-3.13/100-bootargs.patch11
-rw-r--r--target/linux/imx6/patches-3.13/200-PCI-imx6-add-support-for-legacy-irqs.patch43
9 files changed, 0 insertions, 3006 deletions
diff --git a/target/linux/imx6/config-3.13 b/target/linux/imx6/config-3.13
deleted file mode 100644
index fc78c55c54..0000000000
--- a/target/linux/imx6/config-3.13
+++ /dev/null
@@ -1,362 +0,0 @@
-CONFIG_AHCI_IMX=y
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_ARCH_HAS_OPP=y
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-# CONFIG_ARCH_MULTI_CPU_AUTO is not set
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
-# CONFIG_ARM_CPU_SUSPEND is not set
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_IMX6Q_CPUFREQ=y
-# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_NR_BANKS=8
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-# CONFIG_ATA_SFF is not set
-CONFIG_AUTO_ZRELADDR=y
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_XZ=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_IMX_UART_PORT=1
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-# CONFIG_DEBUG_UART_8250 is not set
-# CONFIG_DEBUG_UART_PL01X is not set
-# CONFIG_DEBUG_USER is not set
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_DECOMPRESS_XZ=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DTC=y
-# CONFIG_DW_DMAC_CORE is not set
-# CONFIG_DW_DMAC_PCI is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_FEC=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CPUFREQ_CPU0=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_NET_UTILS=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_MXC=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_TWD=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IMX_ANATOP=y
-CONFIG_HAVE_IMX_GPC=y
-CONFIG_HAVE_IMX_MMDC=y
-CONFIG_HAVE_IMX_SRC=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZ4=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-CONFIG_IMX2_WDT=y
-CONFIG_IMX_DMA=y
-CONFIG_IMX_SDMA=y
-# CONFIG_IMX_WEIM is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IOMMU_HELPER=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD=y
-CONFIG_JBD2=y
-CONFIG_KTIME_SCALAR=y
-# CONFIG_LEDS_REGULATOR is not set
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-# CONFIG_MACH_EUKREA_CPUIMX51SD is not set
-# CONFIG_MACH_IMX51_DT is not set
-# CONFIG_MACH_MX51_BABBAGE is not set
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_MXC is not set
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ESDHC_IMX=y
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_GPMI_NAND=y
-# CONFIG_MTD_PHYSMAP_OF is not set
-# CONFIG_MTD_SM_COMMON is not set
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-# CONFIG_MX3_IPU is not set
-# CONFIG_MXC_DEBUG_BOARD is not set
-# CONFIG_MXC_IRQ_PRIOR is not set
-CONFIG_MXS_DMA=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_RX_BUSY_POLL=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=4
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_DW=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_IMX6=y
-CONFIG_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX=y
-CONFIG_PINCTRL_IMX6Q=y
-CONFIG_PINCTRL_IMX6SL=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PM_OPP=y
-CONFIG_PPS=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_RATIONAL=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_GZIP=y
-CONFIG_RD_LZO=y
-CONFIG_RD_XZ=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_ANATOP=y
-# CONFIG_REGULATOR_DEBUG is not set
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_PFUZE100=y
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_RFKILL_REGULATOR is not set
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_IMXDI is not set
-# CONFIG_RTC_DRV_MXC is not set
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SCHED_HRTICK=y
-CONFIG_SCSI=y
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SOC_BUS=y
-# CONFIG_SOC_IMX53 is not set
-CONFIG_SOC_IMX6Q=y
-CONFIG_SOC_IMX6SL=y
-# CONFIG_SOC_VF610 is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_IMX=y
-CONFIG_SPI_MASTER=y
-CONFIG_STMP_DEVICE=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SWIOTLB=y
-# CONFIG_SWP_EMULATE is not set
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TREE_RCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_XZ=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UID16=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-# CONFIG_USB_MXS_PHY is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VMSPLIT_2G=y
-# CONFIG_VMSPLIT_3G is not set
-# CONFIG_XEN is not set
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-# CONFIG_ZBUD is not set
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/imx6/patches-3.13/0001-ARM-dts-disable-flexcan-by-default.patch b/target/linux/imx6/patches-3.13/0001-ARM-dts-disable-flexcan-by-default.patch
deleted file mode 100644
index babd544af8..0000000000
--- a/target/linux/imx6/patches-3.13/0001-ARM-dts-disable-flexcan-by-default.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 1759b172f78263de7077a2743e11f3b718682849 Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Tue, 22 Oct 2013 21:51:27 -0700
-Subject: [PATCH 1/3] ARM: dts: disable flexcan by default
-
-Typically nodes are disabled by default and enabled when needed.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/boot/dts/imx6qdl.dtsi | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm/boot/dts/imx6qdl.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl.dtsi
-@@ -331,6 +331,7 @@
- interrupts = <0 110 0x04>;
- clocks = <&clks 108>, <&clks 109>;
- clock-names = "ipg", "per";
-+ status = "disabled";
- };
-
- can2: flexcan@02094000 {
-@@ -339,6 +340,7 @@
- interrupts = <0 111 0x04>;
- clocks = <&clks 110>, <&clks 111>;
- clock-names = "ipg", "per";
-+ status = "disabled";
- };
-
- gpt: gpt@02098000 {
diff --git a/target/linux/imx6/patches-3.13/0002-ARM-dts-added-several-new-imx-pinmux-groups.patch b/target/linux/imx6/patches-3.13/0002-ARM-dts-added-several-new-imx-pinmux-groups.patch
deleted file mode 100644
index f2d7f6ca17..0000000000
--- a/target/linux/imx6/patches-3.13/0002-ARM-dts-added-several-new-imx-pinmux-groups.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-From 925467009cc6d92edb02b9e68710db022cd56f41 Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Tue, 22 Oct 2013 21:51:25 -0700
-Subject: [PATCH 2/3] ARM: dts: added several new imx-pinmux groups
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/boot/dts/imx6qdl.dtsi | 60 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 60 insertions(+)
-
---- a/arch/arm/boot/dts/imx6qdl.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl.dtsi
-@@ -639,6 +639,14 @@
- MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x80000000
- >;
- };
-+
-+ pinctrl_audmux_4: audmux-4 {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D24__AUD5_RXFS 0x80000000
-+ MX6QDL_PAD_EIM_D25__AUD5_RXC 0x80000000
-+ MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x80000000
-+ >;
-+ };
- };
-
- ecspi1 {
-@@ -811,6 +819,28 @@
- MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
- >;
- };
-+
-+ /* No Strobe */
-+ pinctrl_gpmi_nand_2: gpmi-nand-2 {
-+ fsl,pins = <
-+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
-+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
-+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
-+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
-+ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
-+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
-+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
-+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
-+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
-+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
-+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
-+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
-+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
-+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
-+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
-+ >;
-+ };
- };
-
- hdmi_hdcp {
-@@ -1058,6 +1088,13 @@
- MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
- >;
- };
-+
-+ pinctrl_uart1_2: uart1grp-2 {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
-+ >;
-+ };
- };
-
- uart2 {
-@@ -1076,6 +1113,13 @@
- MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1
- >;
- };
-+
-+ pinctrl_uart2_3: uart2grp-3 {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
-+ >;
-+ };
- };
-
- uart3 {
-@@ -1096,6 +1140,13 @@
- MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1
- >;
- };
-+
-+ pinctrl_uart3_3: uart3grp-3 {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
-+ >;
-+ };
- };
-
- uart4 {
-@@ -1106,6 +1157,15 @@
- >;
- };
- };
-+
-+ uart5 {
-+ pinctrl_uart5_1: uart5grp-1 {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
-+ >;
-+ };
-+ };
-
- usbotg {
- pinctrl_usbotg_1: usbotggrp-1 {
diff --git a/target/linux/imx6/patches-3.13/0003-ARM-dts-add-Gateworks-Ventana-support.patch b/target/linux/imx6/patches-3.13/0003-ARM-dts-add-Gateworks-Ventana-support.patch
deleted file mode 100644
index 33904b4a58..0000000000
--- a/target/linux/imx6/patches-3.13/0003-ARM-dts-add-Gateworks-Ventana-support.patch
+++ /dev/null
@@ -1,2240 +0,0 @@
-From bf2ef777f8ed0830be49b62167cc67d3be6abba6 Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Tue, 22 Oct 2013 21:51:26 -0700
-Subject: [PATCH 3/3] ARM: dts: add Gateworks Ventana support
-
-The Gateworks Ventana product family consists of several baseboard designs
-based on the Freescale i.MX6 family of processors. Each baseboard has a
-different set of possible features.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/boot/dts/Makefile | 9 +
- arch/arm/boot/dts/imx6dl-gw51xx.dts | 19 ++
- arch/arm/boot/dts/imx6dl-gw52xx.dts | 19 ++
- arch/arm/boot/dts/imx6dl-gw53xx.dts | 19 ++
- arch/arm/boot/dts/imx6dl-gw54xx.dts | 19 ++
- arch/arm/boot/dts/imx6q-gw51xx.dts | 19 ++
- arch/arm/boot/dts/imx6q-gw52xx.dts | 23 ++
- arch/arm/boot/dts/imx6q-gw53xx.dts | 23 ++
- arch/arm/boot/dts/imx6q-gw5400-a.dts | 443 ++++++++++++++++++++++++++++++++
- arch/arm/boot/dts/imx6q-gw54xx.dts | 23 ++
- arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 272 ++++++++++++++++++++
- arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 373 +++++++++++++++++++++++++++
- arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 429 +++++++++++++++++++++++++++++++
- arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 457 ++++++++++++++++++++++++++++++++++
- 14 files changed, 2147 insertions(+)
- create mode 100644 arch/arm/boot/dts/imx6dl-gw51xx.dts
- create mode 100644 arch/arm/boot/dts/imx6dl-gw52xx.dts
- create mode 100644 arch/arm/boot/dts/imx6dl-gw53xx.dts
- create mode 100644 arch/arm/boot/dts/imx6dl-gw54xx.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw51xx.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw52xx.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw53xx.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw5400-a.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw54xx.dts
- create mode 100644 arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
- create mode 100644 arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
- create mode 100644 arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
- create mode 100644 arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -136,10 +136,19 @@ dtb-$(CONFIG_ARCH_MXC) += \
- imx53-mba53.dtb \
- imx53-qsb.dtb \
- imx53-smd.dtb \
-+ imx6dl-gw51xx.dtb \
-+ imx6dl-gw52xx.dtb \
-+ imx6dl-gw53xx.dtb \
-+ imx6dl-gw54xx.dtb \
- imx6dl-sabreauto.dtb \
- imx6dl-sabresd.dtb \
- imx6dl-wandboard.dtb \
- imx6q-arm2.dtb \
-+ imx6q-gw51xx.dtb \
-+ imx6q-gw52xx.dtb \
-+ imx6q-gw53xx.dtb \
-+ imx6q-gw5400-a.dtb \
-+ imx6q-gw54xx.dtb \
- imx6q-phytec-pbab01.dtb \
- imx6q-sabreauto.dtb \
- imx6q-sabrelite.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-gw51xx.dts
-@@ -0,0 +1,19 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-gw51xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 DualLite GW51XX";
-+ compatible = "gw,imx6dl-gw51xx", "gw,ventana", "fsl,imx6dl";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-gw52xx.dts
-@@ -0,0 +1,19 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-gw52xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 DualLite GW52XX";
-+ compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-gw53xx.dts
-@@ -0,0 +1,19 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-gw53xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 DualLite GW53XX";
-+ compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-gw54xx.dts
-@@ -0,0 +1,19 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-gw54xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 DualLite GW54XX";
-+ compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw51xx.dts
-@@ -0,0 +1,19 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+#include "imx6qdl-gw54xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 Quad GW51XX";
-+ compatible = "gw,imx6q-gw51xx", "gw,ventana", "fsl,imx6q";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw52xx.dts
-@@ -0,0 +1,23 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+#include "imx6qdl-gw52xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 Quad GW52XX";
-+ compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q";
-+};
-+
-+&sata {
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw53xx.dts
-@@ -0,0 +1,23 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+#include "imx6qdl-gw53xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 Quad GW53XX";
-+ compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q";
-+};
-+
-+&sata {
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
-@@ -0,0 +1,443 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana GW5400-A";
-+ compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q";
-+
-+ /* these are used by bootloader for disabling nodes */
-+ aliases {
-+ ethernet0 = &fec;
-+ ethernet1 = &eth1;
-+ i2c0 = &i2c1;
-+ i2c1 = &i2c2;
-+ i2c2 = &i2c3;
-+ led0 = &led0;
-+ led1 = &led1;
-+ led2 = &led2;
-+ sky2 = &eth1;
-+ ssi0 = &ssi1;
-+ spi0 = &ecspi1;
-+ usb0 = &usbh1;
-+ usb1 = &usbotg;
-+ usdhc2 = &usdhc3;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttymxc1,115200";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ led0: user1 {
-+ label = "user1";
-+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led1: user2 {
-+ label = "user2";
-+ gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR */
-+ default-state = "off";
-+ };
-+
-+ led2: user3 {
-+ label = "user3";
-+ gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
-+ default-state = "off";
-+ };
-+ };
-+
-+ memory {
-+ reg = <0x10000000 0x40000000>;
-+ };
-+
-+ pps {
-+ compatible = "pps-gpio";
-+ gpios = <&gpio1 5 0>;
-+ status = "okay";
-+ };
-+
-+ regulators {
-+ compatible = "simple-bus";
-+
-+ reg_1p0v: 1p0v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "1P0V";
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_3p3v: 3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_h1_vbus: usb_h1_vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_h1_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_otg_vbus: usb_otg_vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_otg_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ gpio = <&gpio3 22 0>;
-+ enable-active-high;
-+ };
-+ };
-+
-+ sound {
-+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
-+ "fsl,imx-audio-sgtl5000";
-+ model = "imx6q-sabrelite-sgtl5000";
-+ ssi-controller = <&ssi1>;
-+ audio-codec = <&codec>;
-+ audio-routing =
-+ "MIC_IN", "Mic Jack",
-+ "Mic Jack", "Mic Bias",
-+ "Headphone Jack", "HP_OUT";
-+ mux-int-port = <1>;
-+ mux-ext-port = <4>;
-+ };
-+};
-+
-+&audmux {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_audmux_1>;
-+ status = "okay";
-+};
-+
-+&ecspi1 {
-+ fsl,spi-num-chipselects = <1>;
-+ cs-gpios = <&gpio3 19 0>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_ecspi1_1>;
-+ status = "okay";
-+
-+ flash: m25p80@0 {
-+ compatible = "sst,w25q256";
-+ spi-max-frequency = <30000000>;
-+ reg = <0>;
-+ };
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet_1>;
-+ phy-mode = "rgmii";
-+ phy-reset-gpios = <&gpio1 30 0>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1_1>;
-+ status = "okay";
-+
-+ eeprom1: eeprom@50 {
-+ compatible = "atmel,24c02";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom2: eeprom@51 {
-+ compatible = "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom3: eeprom@52 {
-+ compatible = "atmel,24c02";
-+ reg = <0x52>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom4: eeprom@53 {
-+ compatible = "atmel,24c02";
-+ reg = <0x53>;
-+ pagesize = <16>;
-+ };
-+
-+ gpio: pca9555@23 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ hwmon: gsc@29 {
-+ compatible = "gw,gsp";
-+ reg = <0x29>;
-+ };
-+
-+ rtc: ds1672@68 {
-+ compatible = "dallas,ds1672";
-+ reg = <0x68>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2_2>;
-+ status = "okay";
-+
-+ pmic: pfuze100@08 {
-+ compatible = "fsl,pfuze100";
-+ reg = <0x08>;
-+
-+ regulators {
-+ sw1a_reg: sw1ab {
-+ regulator-min-microvolt = <300000>;
-+ regulator-max-microvolt = <1875000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-ramp-delay = <6250>;
-+ };
-+
-+ sw1c_reg: sw1c {
-+ regulator-min-microvolt = <300000>;
-+ regulator-max-microvolt = <1875000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-ramp-delay = <6250>;
-+ };
-+
-+ sw2_reg: sw2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <3950000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3a_reg: sw3a {
-+ regulator-min-microvolt = <400000>;
-+ regulator-max-microvolt = <1975000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3b_reg: sw3b {
-+ regulator-min-microvolt = <400000>;
-+ regulator-max-microvolt = <1975000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw4_reg: sw4 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ swbst_reg: swbst {
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5150000>;
-+ };
-+
-+ snvs_reg: vsnvs {
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ vref_reg: vrefddr {
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ vgen1_reg: vgen1 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-+
-+ vgen2_reg: vgen2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-+
-+ vgen3_reg: vgen3 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ vgen4_reg: vgen4 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen5_reg: vgen5 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen6_reg: vgen6 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+ };
-+ };
-+
-+ pciswitch: pex8609@3f {
-+ compatible = "plx,pex8609";
-+ reg = <0x3f>;
-+ };
-+
-+ pciclkgen: si52147@6b {
-+ compatible = "sil,si52147";
-+ reg = <0x6b>;
-+ };
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3_2>;
-+ status = "okay";
-+
-+ accelerometer: mma8450@1c {
-+ compatible = "fsl,mma8450";
-+ reg = <0x1c>;
-+ };
-+
-+ codec: sgtl5000@0a {
-+ compatible = "fsl,sgtl5000";
-+ reg = <0x0a>;
-+ clocks = <&clks 201>;
-+ VDDA-supply = <&sw4_reg>;
-+ VDDIO-supply = <&reg_3p3v>;
-+ };
-+
-+ hdmiin: adv7611@4c {
-+ compatible = "adi,adv7611";
-+ reg = <0x4c>;
-+ };
-+
-+ touchscreen: egalax_ts@04 {
-+ compatible = "eeti,egalax_ts";
-+ reg = <0x04>;
-+ interrupt-parent = <&gpio7>;
-+ interrupts = <12 2>; /* gpio7_12 active low */
-+ wakeup-gpios = <&gpio7 12 0>;
-+ };
-+
-+ videoout: adv7393@2a {
-+ compatible = "adi,adv7393";
-+ reg = <0x2a>;
-+ };
-+
-+ videoin: adv7180@20 {
-+ compatible = "adi,adv7180";
-+ reg = <0x20>;
-+ };
-+};
-+
-+&iomuxc {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_hog>;
-+
-+ hog {
-+ pinctrl_hog: hoggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
-+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */
-+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
-+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
-+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
-+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 /* GPS_PPS */
-+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
-+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
-+ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x80000000 /* user2 led */
-+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
-+ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */
-+ MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */
-+ >;
-+ };
-+ };
-+};
-+
-+&ldb {
-+ status = "okay";
-+ lvds-channel@0 {
-+ crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
-+ };
-+};
-+
-+&pcie {
-+ reset-gpio = <&gpio1 29 0>;
-+ status = "okay";
-+
-+ eth1: sky2@8 { /* MAC/PHY on bus 8 */
-+ compatible = "marvell,sky2";
-+ };
-+};
-+
-+&ssi1 {
-+ fsl,mode = "i2s-slave";
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1_2>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2_3>;
-+ status = "okay";
-+};
-+
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5_1>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ vbus-supply = <&reg_usb_otg_vbus>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg_1>;
-+ disable-over-current;
-+ status = "okay";
-+};
-+
-+&usbh1 {
-+ vbus-supply = <&reg_usb_h1_vbus>;
-+ status = "okay";
-+};
-+
-+&usdhc3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usdhc3_2>;
-+ cd-gpios = <&gpio7 0 0>;
-+ vmmc-supply = <&reg_3p3v>;
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw54xx.dts
-@@ -0,0 +1,23 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+#include "imx6qdl-gw54xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 Quad GW54XX";
-+ compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
-+};
-+
-+&sata {
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
-@@ -0,0 +1,272 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/ {
-+ /* these are used by bootloader for disabling nodes */
-+ aliases {
-+ can0 = &can1;
-+ ethernet0 = &fec;
-+ led0 = &led0;
-+ led1 = &led1;
-+ nand = &gpmi;
-+ usb0 = &usbh1;
-+ usb1 = &usbotg;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttymxc1,115200";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ led0: user1 {
-+ label = "user1";
-+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led1: user2 {
-+ label = "user2";
-+ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
-+ default-state = "off";
-+ };
-+ };
-+
-+ memory {
-+ reg = <0x10000000 0x20000000>;
-+ };
-+
-+ pps {
-+ compatible = "pps-gpio";
-+ gpios = <&gpio1 26 0>;
-+ status = "okay";
-+ };
-+
-+ regulators {
-+ compatible = "simple-bus";
-+
-+ reg_3p3v: 3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_5p0v: 5p0v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "5P0V";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_otg_vbus: usb_otg_vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_otg_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ gpio = <&gpio3 22 0>;
-+ enable-active-high;
-+ };
-+ };
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet_1>;
-+ phy-mode = "rgmii";
-+ phy-reset-gpios = <&gpio1 30 0>;
-+ status = "okay";
-+};
-+
-+&gpmi {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpmi_nand_2>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1_1>;
-+ status = "okay";
-+
-+ eeprom1: eeprom@50 {
-+ compatible = "atmel,24c02";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom2: eeprom@51 {
-+ compatible = "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom3: eeprom@52 {
-+ compatible = "atmel,24c02";
-+ reg = <0x52>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom4: eeprom@53 {
-+ compatible = "atmel,24c02";
-+ reg = <0x53>;
-+ pagesize = <16>;
-+ };
-+
-+ gpio: pca9555@23 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ hwmon: gsc@29 {
-+ compatible = "gw,gsp";
-+ reg = <0x29>;
-+ };
-+
-+ rtc: ds1672@68 {
-+ compatible = "dallas,ds1672";
-+ reg = <0x68>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2_2>;
-+ status = "okay";
-+
-+ pmic: ltc3676@3c {
-+ compatible = "ltc,ltc3676";
-+ reg = <0x3c>;
-+
-+ regulators {
-+ sw1_reg: ltc3676__sw1 {
-+ regulator-min-microvolt = <1175000>;
-+ regulator-max-microvolt = <1175000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw2_reg: ltc3676__sw2 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3_reg: ltc3676__sw3 {
-+ regulator-min-microvolt = <1175000>;
-+ regulator-max-microvolt = <1175000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw4_reg: ltc3676__sw4 {
-+ regulator-min-microvolt = <1500000>;
-+ regulator-max-microvolt = <1500000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ ldo2_reg: ltc3676__ldo2 {
-+ regulator-min-microvolt = <2500000>;
-+ regulator-max-microvolt = <2500000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ ldo4_reg: ltc3676__ldo4 {
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ };
-+ };
-+ };
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3_2>;
-+ status = "okay";
-+
-+ videoin: adv7180@20 {
-+ compatible = "adi,adv7180";
-+ reg = <0x20>;
-+ };
-+};
-+
-+&iomuxc {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_hog>;
-+
-+ hog {
-+ pinctrl_hog: hoggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */
-+ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */
-+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
-+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
-+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
-+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x80000000 /* PCIE_RST# */
-+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
-+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
-+ >;
-+ };
-+ };
-+};
-+
-+&pcie {
-+ reset-gpio = <&gpio1 0 0>;
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1_2>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2_3>;
-+ status = "okay";
-+};
-+
-+&uart3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart3_3>;
-+ status = "okay";
-+};
-+
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5_1>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ vbus-supply = <&reg_usb_otg_vbus>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg_1>;
-+ disable-over-current;
-+ status = "okay";
-+};
-+
-+&usbh1 {
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
-@@ -0,0 +1,373 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/ {
-+ /* these are used by bootloader for disabling nodes */
-+ aliases {
-+ ethernet0 = &fec;
-+ led0 = &led0;
-+ led1 = &led1;
-+ led2 = &led2;
-+ nand = &gpmi;
-+ ssi0 = &ssi1;
-+ usb0 = &usbh1;
-+ usb1 = &usbotg;
-+ usdhc2 = &usdhc3;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttymxc1,115200";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ led0: user1 {
-+ label = "user1";
-+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led1: user2 {
-+ label = "user2";
-+ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
-+ default-state = "off";
-+ };
-+
-+ led2: user3 {
-+ label = "user3";
-+ gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */
-+ default-state = "off";
-+ };
-+ };
-+
-+ memory {
-+ reg = <0x10000000 0x20000000>;
-+ };
-+
-+ pps {
-+ compatible = "pps-gpio";
-+ gpios = <&gpio1 26 0>;
-+ status = "okay";
-+ };
-+
-+ regulators {
-+ compatible = "simple-bus";
-+
-+ reg_1p0v: 1p0v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "1P0V";
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1000000>;
-+ regulator-always-on;
-+ };
-+
-+ /* remove this fixed regulator once ltc3676__sw2 driver available */
-+ reg_1p8v: 1p8v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "1P8V";
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_3p3v: 3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_5p0v: 5p0v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "5P0V";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_otg_vbus: usb_otg_vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_otg_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ gpio = <&gpio3 22 0>;
-+ enable-active-high;
-+ };
-+ };
-+
-+ sound {
-+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
-+ "fsl,imx-audio-sgtl5000";
-+ model = "imx6q-sabrelite-sgtl5000";
-+ ssi-controller = <&ssi1>;
-+ audio-codec = <&codec>;
-+ audio-routing =
-+ "MIC_IN", "Mic Jack",
-+ "Mic Jack", "Mic Bias",
-+ "Headphone Jack", "HP_OUT";
-+ mux-int-port = <1>;
-+ mux-ext-port = <4>;
-+ };
-+};
-+
-+&audmux {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_audmux_1>;
-+ status = "okay";
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet_1>;
-+ phy-mode = "rgmii";
-+ phy-reset-gpios = <&gpio1 30 0>;
-+ status = "okay";
-+};
-+
-+&gpmi {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpmi_nand_2>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1_1>;
-+ status = "okay";
-+
-+ eeprom1: eeprom@50 {
-+ compatible = "atmel,24c02";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom2: eeprom@51 {
-+ compatible = "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom3: eeprom@52 {
-+ compatible = "atmel,24c02";
-+ reg = <0x52>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom4: eeprom@53 {
-+ compatible = "atmel,24c02";
-+ reg = <0x53>;
-+ pagesize = <16>;
-+ };
-+
-+ gpio: pca9555@23 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ hwmon: gsc@29 {
-+ compatible = "gw,gsp";
-+ reg = <0x29>;
-+ };
-+
-+ rtc: ds1672@68 {
-+ compatible = "dallas,ds1672";
-+ reg = <0x68>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2_2>;
-+ status = "okay";
-+
-+ pciswitch: pex8609@3f {
-+ compatible = "plx,pex8609";
-+ reg = <0x3f>;
-+ };
-+
-+ pmic: ltc3676@3c {
-+ compatible = "ltc,ltc3676";
-+ reg = <0x3c>;
-+
-+ regulators {
-+ sw1_reg: ltc3676__sw1 {
-+ regulator-min-microvolt = <1175000>;
-+ regulator-max-microvolt = <1175000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw2_reg: ltc3676__sw2 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3_reg: ltc3676__sw3 {
-+ regulator-min-microvolt = <1175000>;
-+ regulator-max-microvolt = <1175000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw4_reg: ltc3676__sw4 {
-+ regulator-min-microvolt = <1500000>;
-+ regulator-max-microvolt = <1500000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ ldo2_reg: ltc3676__ldo2 {
-+ regulator-min-microvolt = <2500000>;
-+ regulator-max-microvolt = <2500000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ ldo3_reg: ltc3676__ldo3 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ ldo4_reg: ltc3676__ldo4 {
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ };
-+ };
-+ };
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3_2>;
-+ status = "okay";
-+
-+ accelerometer: fxos8700@1e {
-+ compatible = "fsl,fxos8700";
-+ reg = <0x13>;
-+ };
-+
-+ codec: sgtl5000@0a {
-+ compatible = "fsl,sgtl5000";
-+ reg = <0x0a>;
-+ clocks = <&clks 169>;
-+ VDDA-supply = <&reg_1p8v>;
-+ VDDIO-supply = <&reg_3p3v>;
-+ };
-+
-+ touchscreen: egalax_ts@04 {
-+ compatible = "eeti,egalax_ts";
-+ reg = <0x04>;
-+ interrupt-parent = <&gpio7>;
-+ interrupts = <12 2>; /* gpio7_12 active low */
-+ wakeup-gpios = <&gpio7 12 0>;
-+ };
-+
-+ videoin: adv7180@20 {
-+ compatible = "adi,adv7180";
-+ reg = <0x20>;
-+ };
-+};
-+
-+&iomuxc {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_hog>;
-+
-+ hog {
-+ pinctrl_hog: hoggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */
-+ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */
-+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
-+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x80000000 /* VIDDEC_PDN# */
-+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
-+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */
-+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */
-+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
-+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
-+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USB_SEL_PCI */
-+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
-+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
-+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
-+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
-+ MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* LVDS_TCH# */
-+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_CD# */
-+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x80000000 /* UART2_EN# */
-+ >;
-+ };
-+ };
-+};
-+
-+&ldb {
-+ status = "okay";
-+ lvds-channel@0 {
-+ crtcs = <&ipu1 0>, <&ipu1 1>;
-+ };
-+};
-+
-+&pcie {
-+ reset-gpio = <&gpio1 29 0>;
-+ status = "okay";
-+};
-+
-+&ssi1 {
-+ fsl,mode = "i2s-slave";
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1_2>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2_3>;
-+ status = "okay";
-+};
-+
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5_1>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ vbus-supply = <&reg_usb_otg_vbus>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg_1>;
-+ disable-over-current;
-+ status = "okay";
-+};
-+
-+&usbh1 {
-+ status = "okay";
-+};
-+
-+&usdhc3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usdhc3_2>;
-+ cd-gpios = <&gpio7 0 0>;
-+ vmmc-supply = <&reg_3p3v>;
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
-@@ -0,0 +1,429 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/ {
-+ /* these are used by bootloader for disabling nodes */
-+ aliases {
-+ can0 = &can1;
-+ ethernet0 = &fec;
-+ ethernet1 = &eth1;
-+ led0 = &led0;
-+ led1 = &led1;
-+ led2 = &led2;
-+ nand = &gpmi;
-+ sky2 = &eth1;
-+ ssi0 = &ssi1;
-+ usb0 = &usbh1;
-+ usb1 = &usbotg;
-+ usdhc2 = &usdhc3;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttymxc1,115200";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ led0: user1 {
-+ label = "user1";
-+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led1: user2 {
-+ label = "user2";
-+ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
-+ default-state = "off";
-+ };
-+
-+ led2: user3 {
-+ label = "user3";
-+ gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
-+ default-state = "off";
-+ };
-+ };
-+
-+ memory {
-+ reg = <0x10000000 0x40000000>;
-+ };
-+
-+ pps {
-+ compatible = "pps-gpio";
-+ gpios = <&gpio1 26 0>;
-+ status = "okay";
-+ };
-+
-+ regulators {
-+ compatible = "simple-bus";
-+
-+ reg_1p0v: 1p0v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "1P0V";
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1000000>;
-+ regulator-always-on;
-+ };
-+
-+ /* remove when pmic 1p8 regulator available */
-+ reg_1p8v: 1p8v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "1P8V";
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_3p3v: 3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_h1_vbus: usb_h1_vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_h1_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_otg_vbus: usb_otg_vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_otg_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ gpio = <&gpio3 22 0>;
-+ enable-active-high;
-+ };
-+ };
-+
-+ sound {
-+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
-+ "fsl,imx-audio-sgtl5000";
-+ model = "imx6q-sabrelite-sgtl5000";
-+ ssi-controller = <&ssi1>;
-+ audio-codec = <&codec>;
-+ audio-routing =
-+ "MIC_IN", "Mic Jack",
-+ "Mic Jack", "Mic Bias",
-+ "Headphone Jack", "HP_OUT";
-+ mux-int-port = <1>;
-+ mux-ext-port = <4>;
-+ };
-+};
-+
-+&audmux {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_audmux_1>;
-+ status = "okay";
-+};
-+
-+&can1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_flexcan1_1>;
-+ status = "okay";
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet_1>;
-+ phy-mode = "rgmii";
-+ phy-reset-gpios = <&gpio1 30 0>;
-+ status = "okay";
-+};
-+
-+&gpmi {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpmi_nand_2>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1_1>;
-+ status = "okay";
-+
-+ eeprom1: eeprom@50 {
-+ compatible = "atmel,24c02";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom2: eeprom@51 {
-+ compatible = "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom3: eeprom@52 {
-+ compatible = "atmel,24c02";
-+ reg = <0x52>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom4: eeprom@53 {
-+ compatible = "atmel,24c02";
-+ reg = <0x53>;
-+ pagesize = <16>;
-+ };
-+
-+ gpio: pca9555@23 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ hwmon: gsc@29 {
-+ compatible = "gw,gsp";
-+ reg = <0x29>;
-+ };
-+
-+ rtc: ds1672@68 {
-+ compatible = "dallas,ds1672";
-+ reg = <0x68>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2_2>;
-+ status = "okay";
-+
-+ pciclkgen: si53156@6b {
-+ compatible = "sil,si53156";
-+ reg = <0x6b>;
-+ };
-+
-+ pciswitch: pex8606@3f {
-+ compatible = "plx,pex8606";
-+ reg = <0x3f>;
-+ };
-+
-+ pmic: ltc3676@3c {
-+ compatible = "ltc,ltc3676";
-+ reg = <0x3c>;
-+
-+ regulators {
-+ /* VDD_SOC */
-+ sw1_reg: ltc3676__sw1 {
-+ regulator-min-microvolt = <1175000>;
-+ regulator-max-microvolt = <1175000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ /* VDD_1P8 */
-+ sw2_reg: ltc3676__sw2 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ /* VDD_ARM */
-+ sw3_reg: ltc3676__sw3 {
-+ regulator-min-microvolt = <1175000>;
-+ regulator-max-microvolt = <1175000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ /* VDD_DDR */
-+ sw4_reg: ltc3676__sw4 {
-+ regulator-min-microvolt = <1500000>;
-+ regulator-max-microvolt = <1500000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ /* VDD_2P5 */
-+ ldo2_reg: ltc3676__ldo2 {
-+ regulator-min-microvolt = <2500000>;
-+ regulator-max-microvolt = <2500000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ /* VDD_1P8 */
-+ ldo3_reg: ltc3676__ldo3 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ /* VDD_HIGH */
-+ ldo4_reg: ltc3676__ldo4 {
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ };
-+ };
-+ };
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3_2>;
-+ status = "okay";
-+
-+ accelerometer: fxos8700@1e {
-+ compatible = "fsl,fxos8700";
-+ reg = <0x1e>;
-+ };
-+
-+ codec: sgtl5000@0a {
-+ compatible = "fsl,sgtl5000";
-+ reg = <0x0a>;
-+ clocks = <&clks 201>;
-+ VDDA-supply = <&reg_1p8v>;
-+ VDDIO-supply = <&reg_3p3v>;
-+ };
-+
-+ hdmiin: adv7611@4c {
-+ compatible = "adi,adv7611";
-+ reg = <0x4c>;
-+ };
-+
-+ touchscreen: egalax_ts@04 {
-+ compatible = "eeti,egalax_ts";
-+ reg = <0x04>;
-+ interrupt-parent = <&gpio1>;
-+ interrupts = <11 2>; /* gpio1_11 active low */
-+ wakeup-gpios = <&gpio1 11 0>;
-+ };
-+
-+ videoout: adv7393@2a {
-+ compatible = "adi,adv7393";
-+ reg = <0x2a>;
-+ };
-+
-+ videoin: adv7180@20 {
-+ compatible = "adi,adv7180";
-+ reg = <0x20>;
-+ };
-+};
-+
-+&iomuxc {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_hog>;
-+
-+ hog {
-+ pinctrl_hog: hoggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* PCIE6EXP_DIO0 */
-+ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* PCIE6EXP_DIO1 */
-+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
-+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_SHDN */
-+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
-+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
-+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
-+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
-+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */
-+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x80000000 /* PMIC_IRQ# */
-+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x80000000 /* HUB_RST# */
-+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* PCIE_WDIS# */
-+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x80000000 /* ACCEL_IRQ# */
-+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
-+ MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x80000000 /* USBOTG_OC# */
-+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
-+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
-+ MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* TOUCH_IRQ# */
-+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_DET# */
-+ >;
-+ };
-+ };
-+};
-+
-+&ldb {
-+ status = "okay";
-+
-+ lvds-channel@1 {
-+ fsl,data-mapping = "spwg";
-+ fsl,data-width = <18>;
-+ status = "okay";
-+
-+ display-timings {
-+ native-mode = <&timing0>;
-+ timing0: hsd100pxn1 {
-+ clock-frequency = <65000000>;
-+ hactive = <1024>;
-+ vactive = <768>;
-+ hback-porch = <220>;
-+ hfront-porch = <40>;
-+ vback-porch = <21>;
-+ vfront-porch = <7>;
-+ hsync-len = <60>;
-+ vsync-len = <10>;
-+ };
-+ };
-+ };
-+};
-+
-+&pcie {
-+ reset-gpio = <&gpio1 29 0>;
-+ status = "okay";
-+
-+ eth1: sky2@8 { /* MAC/PHY on bus 8 */
-+ compatible = "marvell,sky2";
-+ };
-+};
-+
-+&ssi1 {
-+ fsl,mode = "i2s-slave";
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1_2>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2_3>;
-+ status = "okay";
-+};
-+
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5_1>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ vbus-supply = <&reg_usb_otg_vbus>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg_1>;
-+ disable-over-current;
-+ status = "okay";
-+};
-+
-+&usbh1 {
-+ vbus-supply = <&reg_usb_h1_vbus>;
-+ status = "okay";
-+};
-+
-+&usdhc3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usdhc3_2>;
-+ cd-gpios = <&gpio7 0 0>;
-+ vmmc-supply = <&reg_3p3v>;
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-@@ -0,0 +1,457 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/ {
-+ /* these are used by bootloader for disabling nodes */
-+ aliases {
-+ can0 = &can1;
-+ ethernet0 = &fec;
-+ ethernet1 = &eth1;
-+ led0 = &led0;
-+ led1 = &led1;
-+ led2 = &led2;
-+ nand = &gpmi;
-+ sky2 = &eth1;
-+ ssi0 = &ssi1;
-+ usb0 = &usbh1;
-+ usb1 = &usbotg;
-+ usdhc2 = &usdhc3;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttymxc1,115200";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ led0: user1 {
-+ label = "user1";
-+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led1: user2 {
-+ label = "user2";
-+ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
-+ default-state = "off";
-+ };
-+
-+ led2: user3 {
-+ label = "user3";
-+ gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
-+ default-state = "off";
-+ };
-+ };
-+
-+ memory {
-+ reg = <0x10000000 0x40000000>;
-+ };
-+
-+ pps {
-+ compatible = "pps-gpio";
-+ gpios = <&gpio1 26 0>;
-+ status = "okay";
-+ };
-+
-+ regulators {
-+ compatible = "simple-bus";
-+
-+ reg_1p0v: 1p0v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "1P0V";
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_3p3v: 3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_h1_vbus: usb_h1_vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_h1_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_otg_vbus: usb_otg_vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_otg_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ gpio = <&gpio3 22 0>;
-+ enable-active-high;
-+ };
-+ };
-+
-+ sound {
-+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
-+ "fsl,imx-audio-sgtl5000";
-+ model = "imx6q-sabrelite-sgtl5000";
-+ ssi-controller = <&ssi1>;
-+ audio-codec = <&codec>;
-+ audio-routing =
-+ "MIC_IN", "Mic Jack",
-+ "Mic Jack", "Mic Bias",
-+ "Headphone Jack", "HP_OUT";
-+ mux-int-port = <1>;
-+ mux-ext-port = <4>;
-+ };
-+};
-+
-+&audmux {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_audmux_1>; /* AUD4<->sgtl5000 */
-+ status = "okay";
-+};
-+
-+&can1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_flexcan1_1>;
-+ status = "okay";
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet_1>;
-+ phy-mode = "rgmii";
-+ phy-reset-gpios = <&gpio1 30 0>;
-+ status = "okay";
-+};
-+
-+&gpmi {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpmi_nand_2>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1_1>;
-+ status = "okay";
-+
-+ eeprom1: eeprom@50 {
-+ compatible = "atmel,24c02";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom2: eeprom@51 {
-+ compatible = "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom3: eeprom@52 {
-+ compatible = "atmel,24c02";
-+ reg = <0x52>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom4: eeprom@53 {
-+ compatible = "atmel,24c02";
-+ reg = <0x53>;
-+ pagesize = <16>;
-+ };
-+
-+ gpio: pca9555@23 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ hwmon: gsc@29 {
-+ compatible = "gw,gsp";
-+ reg = <0x29>;
-+ };
-+
-+ rtc: ds1672@68 {
-+ compatible = "dallas,ds1672";
-+ reg = <0x68>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2_2>;
-+ status = "okay";
-+
-+ pmic: pfuze100@08 {
-+ compatible = "fsl,pfuze100";
-+ reg = <0x08>;
-+
-+ regulators {
-+ sw1a_reg: sw1ab {
-+ regulator-min-microvolt = <300000>;
-+ regulator-max-microvolt = <1875000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-ramp-delay = <6250>;
-+ };
-+
-+ sw1c_reg: sw1c {
-+ regulator-min-microvolt = <300000>;
-+ regulator-max-microvolt = <1875000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-ramp-delay = <6250>;
-+ };
-+
-+ sw2_reg: sw2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <3950000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3a_reg: sw3a {
-+ regulator-min-microvolt = <400000>;
-+ regulator-max-microvolt = <1975000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3b_reg: sw3b {
-+ regulator-min-microvolt = <400000>;
-+ regulator-max-microvolt = <1975000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw4_reg: sw4 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ swbst_reg: swbst {
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5150000>;
-+ };
-+
-+ snvs_reg: vsnvs {
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ vref_reg: vrefddr {
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ vgen1_reg: vgen1 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-+
-+ vgen2_reg: vgen2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-+
-+ vgen3_reg: vgen3 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ vgen4_reg: vgen4 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen5_reg: vgen5 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen6_reg: vgen6 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+ };
-+ };
-+
-+ pciswitch: pex8609@3f {
-+ compatible = "plx,pex8609";
-+ reg = <0x3f>;
-+ };
-+
-+ pciclkgen: si52147@6b {
-+ compatible = "sil,si52147";
-+ reg = <0x6b>;
-+ };
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3_2>;
-+ status = "okay";
-+
-+ accelerometer: fxos8700@1e {
-+ compatible = "fsl,fxos8700";
-+ reg = <0x1e>;
-+ };
-+
-+ codec: sgtl5000@0a {
-+ compatible = "fsl,sgtl5000";
-+ reg = <0x0a>;
-+ clocks = <&clks 201>;
-+ VDDA-supply = <&sw4_reg>;
-+ VDDIO-supply = <&reg_3p3v>;
-+ };
-+
-+ hdmiin: adv7611@4c {
-+ compatible = "adi,adv7611";
-+ reg = <0x4c>;
-+ };
-+
-+ touchscreen: egalax_ts@04 {
-+ compatible = "eeti,egalax_ts";
-+ reg = <0x04>;
-+ interrupt-parent = <&gpio7>;
-+ interrupts = <12 2>; /* gpio7_12 active low */
-+ wakeup-gpios = <&gpio7 12 0>;
-+ };
-+
-+ videoout: adv7393@2a {
-+ compatible = "adi,adv7393";
-+ reg = <0x2a>;
-+ };
-+
-+ videoin: adv7180@20 {
-+ compatible = "adi,adv7180";
-+ reg = <0x20>;
-+ };
-+};
-+
-+&iomuxc {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_hog>;
-+
-+ hog {
-+ pinctrl_hog: hoggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
-+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */
-+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
-+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
-+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
-+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
-+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */
-+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
-+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
-+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
-+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
-+ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */
-+ MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */
-+ >;
-+ };
-+ };
-+};
-+
-+&ldb {
-+ status = "okay";
-+
-+ lvds-channel@1 {
-+ fsl,data-mapping = "spwg";
-+ fsl,data-width = <18>;
-+ status = "okay";
-+
-+ display-timings {
-+ native-mode = <&timing0>;
-+ timing0: hsd100pxn1 {
-+ clock-frequency = <65000000>;
-+ hactive = <1024>;
-+ vactive = <768>;
-+ hback-porch = <220>;
-+ hfront-porch = <40>;
-+ vback-porch = <21>;
-+ vfront-porch = <7>;
-+ hsync-len = <60>;
-+ vsync-len = <10>;
-+ };
-+ };
-+ };
-+};
-+
-+&pcie {
-+ reset-gpio = <&gpio1 29 0>;
-+ status = "okay";
-+
-+ eth1: sky2@8 { /* MAC/PHY on bus 8 */
-+ compatible = "marvell,sky2";
-+ };
-+};
-+
-+&ssi1 {
-+ fsl,mode = "i2s-slave";
-+ status = "okay";
-+};
-+
-+&ssi2 {
-+ fsl,mode = "i2s-slave";
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1_2>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2_3>;
-+ status = "okay";
-+};
-+
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5_1>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ vbus-supply = <&reg_usb_otg_vbus>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg_1>;
-+ disable-over-current;
-+ status = "okay";
-+};
-+
-+&usbh1 {
-+ vbus-supply = <&reg_usb_h1_vbus>;
-+ status = "okay";
-+};
-+
-+&usdhc3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usdhc3_2>;
-+ cd-gpios = <&gpio7 0 0>;
-+ vmmc-supply = <&reg_3p3v>;
-+ status = "okay";
-+};
diff --git a/target/linux/imx6/patches-3.13/0004-imx-add-PCI-fixup-for-PEX860X-on-Gateworks-board.patch b/target/linux/imx6/patches-3.13/0004-imx-add-PCI-fixup-for-PEX860X-on-Gateworks-board.patch
deleted file mode 100644
index 93f1ee4e28..0000000000
--- a/target/linux/imx6/patches-3.13/0004-imx-add-PCI-fixup-for-PEX860X-on-Gateworks-board.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 4bb1d09fe48f51efac2f51b9280796e2d00a6c4a Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Tue, 22 Oct 2013 21:51:28 -0700
-Subject: [PATCH] ARM: imx: add PCI fixup for PEX860X on Gateworks board
-
-The PEX860X has GPIO's which are used for PCI Reset lines on the
-Gateworks Ventana boards. The GPIO's need to be set as output
-level high so as to allow the PCIe devices to come out of reset.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/mach-imx/mach-imx6q.c | 30 ++++++++++++++++++++++++++++++
- 1 file changed, 30 insertions(+)
-
---- a/arch/arm/mach-imx/mach-imx6q.c
-+++ b/arch/arm/mach-imx/mach-imx6q.c
-@@ -13,6 +13,7 @@
- #include <linux/clk.h>
- #include <linux/clkdev.h>
- #include <linux/cpu.h>
-+#include <linux/delay.h>
- #include <linux/export.h>
- #include <linux/init.h>
- #include <linux/io.h>
-@@ -23,6 +24,7 @@
- #include <linux/of_irq.h>
- #include <linux/of_platform.h>
- #include <linux/pm_opp.h>
-+#include <linux/pci.h>
- #include <linux/phy.h>
- #include <linux/reboot.h>
- #include <linux/regmap.h>
-@@ -78,6 +80,34 @@ static int ksz9031rn_phy_fixup(struct ph
- return 0;
- }
-
-+/*
-+ * fixup for PLX PEX8909 bridge to configure GPIO1-7 as output High
-+ * as they are used for slots1-7 PERST#
-+ */
-+static void ventana_pciesw_early_fixup(struct pci_dev *dev)
-+{
-+ u32 dw;
-+
-+ if (!of_machine_is_compatible("gw,ventana"))
-+ return;
-+
-+ if (dev->devfn != 0)
-+ return;
-+
-+ pci_read_config_dword(dev, 0x62c, &dw);
-+ dw |= 0xaaa8; // GPIO1-7 outputs
-+ pci_write_config_dword(dev, 0x62c, dw);
-+
-+ pci_read_config_dword(dev, 0x644, &dw);
-+ dw |= 0xfe; // GPIO1-7 output high
-+ pci_write_config_dword(dev, 0x644, dw);
-+
-+ msleep(100);
-+}
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609, ventana_pciesw_early_fixup);
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8606, ventana_pciesw_early_fixup);
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8604, ventana_pciesw_early_fixup);
-+
- static int ar8031_phy_fixup(struct phy_device *dev)
- {
- u16 val;
diff --git a/target/linux/imx6/patches-3.13/0005-PCI-designware-Fix-I-O-transfers-by-using-CPU-not-re.patch b/target/linux/imx6/patches-3.13/0005-PCI-designware-Fix-I-O-transfers-by-using-CPU-not-re.patch
deleted file mode 100644
index 688de09a73..0000000000
--- a/target/linux/imx6/patches-3.13/0005-PCI-designware-Fix-I-O-transfers-by-using-CPU-not-re.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From fce8591f73c6a30c231f220d1092362aae0b985c Mon Sep 17 00:00:00 2001
-From: Pratyush Anand <pratyush.anand@st.com>
-Date: Wed, 11 Dec 2013 15:08:33 +0530
-Subject: [PATCH] PCI: designware: Fix I/O transfers by using CPU (not realio)
- address
-
-pp->io_base, which is the input of the outbound IO address translation
-unit, should be the CPU address. It was incorrectly programmed to the
-realio address.
-
-We should pass global_io_offset rather than sys->io_offset to
-pci_ioremap_io(), so we map the new window into the first available spot in
-the Linux view of the I/O space.
-
-We must also pass CPU address instead of realio address to pci_ioremap_io().
-
-This patch fixes above issue. It has been tested with Lecroy PTC in AIC
-mode and Pericom PI7C9X2G303EL PCIe switch, which does not work otherwise.
-
-Tested-by: Mohit Kumar <mohit.kumar@st.com>
-Tested-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
-Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
-Reviewed-by: Marek Vasut <marex@denx.de
-Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
-Acked-by: Arnd Bergmann <arnd@arndb.de>
-Acked-by: Jingoo Han <jg1.han@samsung.com>
-Cc: Richard Zhu <Hong-Xing.Zhu@freescale.com>
----
- drivers/pci/host/pcie-designware.c | 5 ++---
- 1 file changed, 2 insertions(+), 3 deletions(-)
-
---- a/drivers/pci/host/pcie-designware.c
-+++ b/drivers/pci/host/pcie-designware.c
-@@ -394,6 +394,7 @@ int __init dw_pcie_host_init(struct pcie
- + global_io_offset);
- pp->config.io_size = resource_size(&pp->io);
- pp->config.io_bus_addr = range.pci_addr;
-+ pp->io_base = range.cpu_addr;
- }
- if (restype == IORESOURCE_MEM) {
- of_pci_range_to_resource(&range, np, &pp->mem);
-@@ -419,7 +420,6 @@ int __init dw_pcie_host_init(struct pcie
-
- pp->cfg0_base = pp->cfg.start;
- pp->cfg1_base = pp->cfg.start + pp->config.cfg0_size;
-- pp->io_base = pp->io.start;
- pp->mem_base = pp->mem.start;
-
- pp->va_cfg0_base = devm_ioremap(pp->dev, pp->cfg0_base,
-@@ -585,7 +585,6 @@ static int dw_pcie_wr_other_conf(struct
- return ret;
- }
-
--
- static int dw_pcie_valid_config(struct pcie_port *pp,
- struct pci_bus *bus, int dev)
- {
-@@ -679,7 +678,7 @@ static int dw_pcie_setup(int nr, struct
-
- if (global_io_offset < SZ_1M && pp->config.io_size > 0) {
- sys->io_offset = global_io_offset - pp->config.io_bus_addr;
-- pci_ioremap_io(sys->io_offset, pp->io.start);
-+ pci_ioremap_io(global_io_offset, pp->io_base);
- global_io_offset += SZ_64K;
- pci_add_resource_offset(&sys->resources, &pp->io,
- sys->io_offset);
diff --git a/target/linux/imx6/patches-3.13/0050-sky2-allow-mac-to-come-from-dt.patch b/target/linux/imx6/patches-3.13/0050-sky2-allow-mac-to-come-from-dt.patch
deleted file mode 100644
index bab418bf26..0000000000
--- a/target/linux/imx6/patches-3.13/0050-sky2-allow-mac-to-come-from-dt.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From: Tim Harvey <tharvey@gateworks.com>
-Subject: [PATCH] sky2: allow mac to come from dt
-
-The driver reads the mac address from the device registers which would
-need to have been programmed by the bootloader. This patch adds
-the ability to pull the mac from devicetree via the aliases/sky2 node.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
----
- drivers/net/ethernet/marvell/sky2.c | 33 ++++++++++++++++++++++++++++++++-
- 1 file changed, 32 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/marvell/sky2.c
-+++ b/drivers/net/ethernet/marvell/sky2.c
-@@ -44,6 +44,8 @@
- #include <linux/prefetch.h>
- #include <linux/debugfs.h>
- #include <linux/mii.h>
-+#include <linux/of_device.h>
-+#include <linux/of_net.h>
-
- #include <asm/irq.h>
-
-@@ -4748,6 +4750,7 @@ static struct net_device *sky2_init_netd
- {
- struct sky2_port *sky2;
- struct net_device *dev = alloc_etherdev(sizeof(*sky2));
-+ unsigned char *iap, tmpaddr[ETH_ALEN];
-
- if (!dev)
- return NULL;
-@@ -4805,8 +4808,36 @@ static struct net_device *sky2_init_netd
-
- dev->features |= dev->hw_features;
-
-+ /*
-+ * try to get mac address in the following order:
-+ * 1) from device tree data
-+ * 2) from internal registers set by bootloader
-+ */
-+ iap = NULL;
-+ if (IS_ENABLED(CONFIG_OF)) {
-+ struct device_node *np;
-+ np = of_find_node_by_path("/aliases");
-+ if (np) {
-+ const char *path = of_get_property(np, "sky2", NULL);
-+ if (path)
-+ np = of_find_node_by_path(path);
-+ if (np)
-+ path = of_get_mac_address(np);
-+ if (path)
-+ iap = (unsigned char *) path;
-+ }
-+ }
-+
-+ /*
-+ * 2) mac registers set by bootloader
-+ */
-+ if (!iap || !is_valid_ether_addr(iap)) {
-+ memcpy_fromio(&tmpaddr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
-+ iap = &tmpaddr[0];
-+ }
-+
- /* read the mac address */
-- memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
-+ memcpy(dev->dev_addr, iap, ETH_ALEN);
-
- return dev;
- }
diff --git a/target/linux/imx6/patches-3.13/100-bootargs.patch b/target/linux/imx6/patches-3.13/100-bootargs.patch
deleted file mode 100644
index 0954391203..0000000000
--- a/target/linux/imx6/patches-3.13/100-bootargs.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/arm/boot/dts/imx6dl-wandboard.dts
-+++ b/arch/arm/boot/dts/imx6dl-wandboard.dts
-@@ -19,4 +19,8 @@
- memory {
- reg = <0x10000000 0x40000000>;
- };
-+
-+ chosen {
-+ bootargs = "console=ttymxc0,115200";
-+ };
- };
diff --git a/target/linux/imx6/patches-3.13/200-PCI-imx6-add-support-for-legacy-irqs.patch b/target/linux/imx6/patches-3.13/200-PCI-imx6-add-support-for-legacy-irqs.patch
deleted file mode 100644
index 23e94a96a5..0000000000
--- a/target/linux/imx6/patches-3.13/200-PCI-imx6-add-support-for-legacy-irqs.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From: Tim Harvey <tharvey@gateworks.com>
-Subject: [PATCH] PCI: imx6: add support for legacy irqs
-
-The i.MX6 supports legacy IRQ's via 155,154,153,152. When devices
-are behind a PCIe-to-PCIe switch (at least for the TI XIO2001) the
-mapping is reversed from when they are behind a PCIe switch.
-
-This patch still needs some review and clarification before going
-upstream.
----
- drivers/pci/host/pcie-designware.c | 21 ++++++++++++++++++++-
- 1 file changed, 20 insertions(+), 1 deletion(-)
-
---- a/drivers/pci/host/pcie-designware.c
-+++ b/drivers/pci/host/pcie-designware.c
-@@ -711,7 +711,26 @@ static int dw_pcie_map_irq(const struct
- {
- struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata);
-
-- return pp->irq;
-+ /* TI XIO2001 PCIe-to-PCI bridge IRQs are flipped it seems */
-+ if ( dev->bus && dev->bus->self
-+ && (dev->bus->self->vendor == 0x104c)
-+ && (dev->bus->self->device == 0x8240)) {
-+ switch (pin) {
-+ case 1: return pp->irq - 3;
-+ case 2: return pp->irq - 2;
-+ case 3: return pp->irq - 1;
-+ case 4: return pp->irq;
-+ default: return -1;
-+ }
-+ } else {
-+ switch (pin) {
-+ case 1: return pp->irq;
-+ case 2: return pp->irq - 1;
-+ case 3: return pp->irq - 2;
-+ case 4: return pp->irq - 3;
-+ default: return -1;
-+ }
-+ }
- }
-
- static void dw_pcie_add_bus(struct pci_bus *bus)