diff options
| author | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-02-27 14:46:25 +0100 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-03-05 12:53:35 +0100 |
| commit | 938bc57a45a7f76597c8a38d3dbe930414b10aab (patch) | |
| tree | af69036404766529788185fabc59b733a3fb2d9c /target/linux | |
| parent | 6b7a525a725a78ff961d91a76e4ea9fbb7066178 (diff) | |
| download | upstream-938bc57a45a7f76597c8a38d3dbe930414b10aab.tar.gz upstream-938bc57a45a7f76597c8a38d3dbe930414b10aab.tar.bz2 upstream-938bc57a45a7f76597c8a38d3dbe930414b10aab.zip | |
ramips: fix and tidy up DTS for D-Link DIR-810L
This patch addresses several issues for D-Link DIR-810L:
- add correct button codes
- harmonize button node names
- use generic flash@0
- remove unused pin groups from state_default
- improve sorting of properties
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Diffstat (limited to 'target/linux')
| -rw-r--r-- | target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts | 18 |
1 files changed, 10 insertions, 8 deletions
diff --git a/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts b/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts index 0b1ca26ba4..514e9cc354 100644 --- a/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts +++ b/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts @@ -23,20 +23,20 @@ reset { label = "reset"; gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = <BTN_0>; + linux,code = <KEY_RESTART>; }; wps { label = "wps"; gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = <BTN_0>; + linux,code = <KEY_WPS_BUTTON>; }; }; leds { compatible = "gpio-leds"; - led_power_green: power { + led_power_green: power_green { label = "dir-810l:green:power"; gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; }; @@ -46,7 +46,7 @@ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; - power2 { + power_orange { label = "dir-810l:orange:power"; gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; }; @@ -56,7 +56,7 @@ &spi0 { status = "okay"; - m25p80@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; @@ -119,7 +119,7 @@ &state_default { gpio { - ralink,group = "mdio", "rgmii1", "i2c", "wled", "uartf"; + ralink,group = "i2c", "uartf"; ralink,function = "gpio"; }; }; @@ -130,9 +130,10 @@ }; &gsw { - mediatek,port4 = "ephy"; pinctrl-names = "default"; pinctrl-0 = <&ephy_pins>; + + mediatek,port4 = "ephy"; }; &pcie { @@ -140,9 +141,10 @@ }; &wmac { - ralink,mtd-eeprom = <&factory 0x0>; pinctrl-names = "default"; pinctrl-0 = <&pa_pins>; + + ralink,mtd-eeprom = <&factory 0x0>; mtd-mac-address = <&factory 0x28>; }; |