ramips: mt7621: add support for Netgear R6800

This patch adds support for the Netgear R6800, aka Netgear AC1900 and
R6800-100PES.

Specification:
- SoC: MediaTek MT7621AT (880 MHz)
- Flash: 128 MiB NAND
- RAM: 256 MiB
- Wireless: MediaTek MT7615EN b/g/n , MediaTek MT7615EN an+ac
- LAN speed: 10/100/1000
- LAN ports: 4
- WAN speed: 10/100/1000
- WAN ports: 1
- USB 2.0
- USB 3.0
- Serial baud rate of Bootloader and factory firmware: 57600

Known issues:
- Device has 3 wifi LEDs: Wifi 5Ghz, Wifi 2.4Ghz and Wifi on/off.
  Wifi on/off is not used.

Installation:
- apply factory image via stock web-gui.

Back to stock:
- nmrpflash can be used to recover to the stock Netgear firmware.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>

7 files changed, 272 insertions, 0 deletions

diff --git a/target/linux/ramips/dts/mt7621_netgear_r6800.dts b/target/linux/ramips/dts/mt7621_netgear_r6800.dts
new file mode 100644
index 0000000000..fed7bbba38
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_netgear_r6800.dts
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "mt7621_netgear_sercomm_bzv.dtsi"
+
+/ {
+	compatible = "netgear,r6800", "mediatek,mt7621-soc";
+	model = "Netgear R6800";
+
+	aliases {
+		led-boot = &led_power_white;
+		led-failsafe = &led_power_orange;
+		led-running = &led_power_white;
+		led-upgrade = &led_power_orange;
+		label-mac-device = &ethernet;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power_orange: power_orange {
+			gpios = <&gpio_expander 0 GPIO_ACTIVE_LOW>;
+			label = "r6800:orange:power";
+		};
+
+		led_power_white: power_white {
+			gpios = <&gpio_expander 1 GPIO_ACTIVE_LOW>;
+			label = "r6800:white:power";
+		};
+
+		wan_orange {
+			gpios = <&gpio_expander 2 GPIO_ACTIVE_LOW>;
+			label = "r6800:orange:wan";
+		};
+
+		wan_white {
+			gpios = <&gpio_expander 3 GPIO_ACTIVE_LOW>;
+			label = "r6800:white:wan";
+		};
+
+		wlan2g {
+			gpios = <&gpio_expander 4 GPIO_ACTIVE_LOW>;
+			label = "r6800:white:wlan2g";
+			linux,default-trigger = "phy0radio";
+		};
+
+		wlan5g {
+			gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>;
+			label = "r6800:white:wlan5g";
+			linux,default-trigger = "phy1radio";
+		};
+
+		usb2 {
+			gpios = <&gpio_expander 6 GPIO_ACTIVE_LOW>;
+			label = "r6800:white:usb2";
+			linux,default-trigger = "usbport";
+			trigger-sources = <&ehci_port2>;
+		};
+
+		usb3 {
+			gpios = <&gpio_expander 7 GPIO_ACTIVE_LOW>;
+			label = "r6800:white:usb3";
+			linux,default-trigger = "usbport";
+			trigger-sources = <&xhci_ehci_port1>;
+		};
+
+		lan1_orange {
+			gpios = <&gpio_expander 8 GPIO_ACTIVE_LOW>;
+			label = "r6800:orange:lan1";
+		};
+
+		lan1_white {
+			gpios = <&gpio_expander 9 GPIO_ACTIVE_LOW>;
+			label = "r6800:white:lan1";
+		};
+
+		lan2_orange {
+			gpios = <&gpio_expander 10 GPIO_ACTIVE_LOW>;
+			label = "r6800:orange:lan2";
+		};
+
+		lan2_white {
+			gpios = <&gpio_expander 11 GPIO_ACTIVE_LOW>;
+			label = "r6800:white:lan2";
+		};
+
+		lan3_orange {
+			gpios = <&gpio_expander 12 GPIO_ACTIVE_LOW>;
+			label = "r6800:orange:lan3";
+		};
+
+		lan3_white {
+			gpios = <&gpio_expander 13 GPIO_ACTIVE_LOW>;
+			label = "r6800:white:lan3";
+		};
+
+		lan4_orange {
+			gpios = <&gpio_expander 14 GPIO_ACTIVE_LOW>;
+			label = "r6800:orange:lan4";
+		};
+
+		lan4_white {
+			gpios = <&gpio_expander 15 GPIO_ACTIVE_LOW>;
+			label = "r6800:white:lan4";
+		};
+
+		wps {
+			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+			label = "r6800:white:wps";
+		};
+
+		wlan {
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+			label = "r6800:white:wlan";
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		ralink,group = "uart3", "uart2", "jtag", "wdt";
+		ralink,function = "gpio";
+	};
+};
diff --git a/target/linux/ramips/dts/mt7621_netgear_sercomm_bzv.dtsi b/target/linux/ramips/dts/mt7621_netgear_sercomm_bzv.dtsi
new file mode 100644
index 0000000000..6538b6926e
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_netgear_sercomm_bzv.dtsi
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "mediatek,mt7621-soc";
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0 0 0 0 0>;
+		mediatek,mtd-eeprom = <&factory 0x0>;
+		ieee80211-freq-limit = <2400000 2500000>;
+	};
+};
+
+&pcie1 {
+	wifi@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0 0 0 0 0>;
+		mediatek,mtd-eeprom = <&factory 0x8000>;
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};
+
+&ethernet {
+	mtd-mac-address = <&factory 0x4>;
+};
+
+&i2c {
+	status = "okay";
+
+	gpio_expander: i2c0gpio-expander@20{
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		compatible = "semtech,sx1503q";
+		reg = <0x20>;
+
+		gpio-controller;
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x100000>;
+			read-only;
+		};
+
+		partition@100000 {
+			label = "SC PART_MAP";
+			reg = <0x100000 0x100000>;
+			read-only;
+		};
+
+		partition@200000 {
+			label = "kernel";
+			reg = <0x200000 0x400000>;
+		};
+
+		partition@600000 {
+			label = "ubi";
+			reg = <0x600000 0x2800000>;
+		};
+
+		partition@2e00000 {
+			label = "reserved0";
+			reg = <0x2e00000 0x1800000>;
+			read-only;
+		};
+
+		factory: partition@4600000 {
+			label = "factory";
+			reg = <0x4600000 0x200000>;
+			read-only;
+		};
+
+		partition@4800000 {
+			label = "reserved1";
+			reg = <0x4800000 0x3800000>;
+			read-only;
+		};
+	};
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 4c27cdbd31..82fbd87df9 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -595,6 +595,18 @@ define Device/netgear_r6350
 endef
 TARGET_DEVICES += netgear_r6350
 
+define Device/netgear_r6800
+  $(Device/netgear_sercomm_nand)
+  DEVICE_MODEL := R6800
+  SERCOMM_HWNAME := R6950
+  SERCOMM_HWID := BZV
+  SERCOMM_HWVER := A001
+  SERCOMM_SWVER := 0x0062
+  IMAGE_SIZE := 40960k
+  DEVICE_PACKAGES += kmod-mt7615e
+endef
+TARGET_DEVICES += netgear_r6800
+
 define Device/netgear_r6850
   $(Device/netgear_sercomm_nand)
   DEVICE_MODEL := R6850
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
index 4eab8f42fe..ac73729d1b 100755
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
@@ -52,6 +52,13 @@ netgear,r6850|\
 netgear,wndr3700-v5)
 	ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
 	;;
+netgear,r6800)
+	ucidef_set_led_switch "wan" "WAN" "$boardname:white:wan" "switch0" "0x10"
+	ucidef_set_led_switch "lan1" "LAN1" "$boardname:white:lan1" "switch0" "0x08"
+	ucidef_set_led_switch "lan2" "LAN2" "$boardname:white:lan2" "switch0" "0x04"
+	ucidef_set_led_switch "lan3" "LAN3" "$boardname:white:lan3" "switch0" "0x02"
+	ucidef_set_led_switch "lan4" "LAN4" "$boardname:white:lan4" "switch0" "0x01"
+	;;
 tplink,re350-v1|\
 tplink,re650-v1)
 	ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "$boardname:blue:wifi2G" "wlan0"
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index 9b7b56f0ba..a84ee808a3 100755
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -41,6 +41,7 @@ ramips_setup_interfaces()
 	netgear,r6220|\
 	netgear,r6260|\
 	netgear,r6350|\
+	netgear,r6800|\
 	netgear,r6850|\
 	netgear,wndr3700-v5|\
 	netis,wf2881|\
@@ -252,6 +253,7 @@ ramips_setup_macs()
 		;;
 	netgear,r6260|\
 	netgear,r6350|\
+	netgear,r6800|\
 	netgear,r6850)
 		wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 2)
 		;;
diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
index 465ea0a909..f6b5c86431 100755
--- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
@@ -48,6 +48,7 @@ platform_do_upgrade() {
 	netgear,r6220|\
 	netgear,r6260|\
 	netgear,r6350|\
+	netgear,r6800|\
 	netgear,r6850|\
 	netis,wf2881|\
 	xiaomi,mir3g|\
diff --git a/target/linux/ramips/mt7621/config-4.14 b/target/linux/ramips/mt7621/config-4.14
index 4112cad780..2ae6afb97f 100644
--- a/target/linux/ramips/mt7621/config-4.14
+++ b/target/linux/ramips/mt7621/config-4.14
@@ -236,6 +236,7 @@ CONFIG_PHYLIB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_RT2880=y
 # CONFIG_PINCTRL_SINGLE is not set
+CONFIG_PINCTRL_SX150X=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_SUPPLY=y