aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorINAGAKI Hiroshi <musashino.open@gmail.com>2019-09-14 00:14:36 +0900
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2021-02-11 16:37:53 +0100
commit08768b44d9b6983ae8d2b96434225fef1f5f664c (patch)
tree59a571239d88c9ce4485bb4ceaea1b92b3e1e7d5 /target/linux
parente95b1b23f1b6951318d6c6caf3803fb933f71a6c (diff)
downloadupstream-08768b44d9b6983ae8d2b96434225fef1f5f664c.tar.gz
upstream-08768b44d9b6983ae8d2b96434225fef1f5f664c.tar.bz2
upstream-08768b44d9b6983ae8d2b96434225fef1f5f664c.zip
ramips: add support for ELECOM WRC-1167FS
ELECOM WRC-1167FS is a 2.4/5 GHz band 11ac (WiFi-5) router, based on MT7628AN. Specification: - SoC : MediaTek MT7628AN - RAM : DDR2 64 MiB (NT5TU32M16FG-AC) - Flash : SPI-NOR 16 MiB (W25Q128JVSIQ) - WLAN : 2.4/5 GHz 2T2R - 2.4 GHz : MediaTek MT7628AN (SoC) - 5 GHz : MediaTek MT7612E - Ethernet : 10/100 Mbps x2 - Switch : MT7628AN (SoC) - LEDs/Keys : 6x, 3x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J1: 3.3V, GND, TX, RX from "J1" marking - 57600n8 - Power : 12 VDC, 1 A Flash instruction using factory image: 1. Boot WRC-1167FS normally 2. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory image and click apply ("適用") button to perform firmware update 4. Wait ~120 seconds to complete flashing Notes: - Last 0x800000 (8 MiB) in SPI-NOR flash is not used on stock firmware - Additional padding in factory image is required to avoid incomplete flashing on stock firmware MAC addresses: - LAN : BC:5C:4C:xx:xx:68 (Config, ethaddr (text) / Factory, 0x28 (hex)) - WAN : BC:5C:4C:xx:xx:69 (Config, wanaddr (text) / Factory, 0x22 (hex)) - 2.4GHz: BC:5C:4C:xx:xx:6A (Config, rmac (text) / Factory, 0x4 (hex)) - 5GHz : BC:5C:4C:xx:xx:6B (Config, rmac2 (text) / Factory, 0x8004 (hex)) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ramips/dts/mt7628an_elecom_wrc-1167fs.dts164
-rw-r--r--target/linux/ramips/image/mt76x8.mk27
-rwxr-xr-xtarget/linux/ramips/mt76x8/base-files/etc/board.d/01_leds4
-rwxr-xr-xtarget/linux/ramips/mt76x8/base-files/etc/board.d/02_network5
4 files changed, 200 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/mt7628an_elecom_wrc-1167fs.dts b/target/linux/ramips/dts/mt7628an_elecom_wrc-1167fs.dts
new file mode 100644
index 0000000000..aa60b8a2c6
--- /dev/null
+++ b/target/linux/ramips/dts/mt7628an_elecom_wrc-1167fs.dts
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "elecom,wrc-1167fs", "mediatek,mt7628an-soc";
+ model = "ELECOM WRC-1167FS";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan5g {
+ label = "green:wlan5g";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wps {
+ label = "red:wps";
+ gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+ };
+
+ internet {
+ label = "green:internet";
+ gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "green:wlan2g";
+ gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ ap {
+ label = "ap";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x730000>;
+ };
+
+ partition@780000 {
+ label = "storage";
+ reg = <0x780000 0x80000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "disabled";
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+ mediatek,portdisable = <0x27>;
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&ohci {
+ status = "disabled";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "wled_an", "p3led_an", "p4led_an", "wdt", "refclk", "i2c", "i2s";
+ function = "gpio";
+ };
+};
+
+&wmac {
+ status = "okay";
+};
diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk
index 00976f6044..7ba2acacb8 100644
--- a/target/linux/ramips/image/mt76x8.mk
+++ b/target/linux/ramips/image/mt76x8.mk
@@ -6,6 +6,21 @@ include ./common-tp-link.mk
DEFAULT_SOC := mt7628an
+define Build/elecom-header
+ $(eval model_id=$(1))
+ ( \
+ fw_size="$$(printf '%08x' $$(stat -c%s $@))"; \
+ echo -ne "$$(echo "031d6129$${fw_size}06000000$(model_id)" | \
+ sed 's/../\\x&/g')"; \
+ dd if=/dev/zero bs=92 count=1; \
+ data_crc="$$(dd if=$@ | gzip -c | tail -c 8 | \
+ od -An -N4 -tx4 --endian little | tr -d ' \n')"; \
+ echo -ne "$$(echo "$${data_crc}00000000" | sed 's/../\\x&/g')"; \
+ dd if=$@; \
+ ) > $@.new
+ mv $@.new $@
+endef
+
define Build/ravpower-wd009-factory
mkimage -A mips -T standalone -C none -a 0x80010000 -e 0x80010000 \
-n "OpenWrt Bootloader" -d $(UBOOT_PATH) $@.new
@@ -93,6 +108,18 @@ define Device/duzun_dm06
endef
TARGET_DEVICES += duzun_dm06
+define Device/elecom_wrc-1167fs
+ IMAGE_SIZE := 7360k
+ DEVICE_VENDOR := ELECOM
+ DEVICE_MODEL := WRC-1167FS
+ IMAGES += factory.bin
+ IMAGE/factory.bin := $$(sysupgrade_bin) | pad-to 64k | check-size | \
+ xor-image -p 29944A25 -x | elecom-header 00228000 | \
+ elecom-product-header WRC-1167FS
+ DEVICE_PACKAGES := kmod-mt76x2
+endef
+TARGET_DEVICES += elecom_wrc-1167fs
+
define Device/glinet_gl-mt300n-v2
IMAGE_SIZE := 16064k
DEVICE_VENDOR := GL.iNet
diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
index bcbc2ed1e6..47b73e01a2 100755
--- a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
@@ -25,6 +25,10 @@ cudy,wr1000)
ucidef_set_led_switch "lan1" "lan1" "blue:lan1" "switch0" "0x08"
ucidef_set_led_switch "lan2" "lan2" "blue:lan2" "switch0" "0x04"
;;
+elecom,wrc-1167fs)
+ ucidef_set_led_switch "lan" "lan" "green:lan" "switch0" "0x8"
+ ucidef_set_led_switch "internet" "internet" "green:internet" "switch0" "0x10"
+ ;;
glinet,gl-mt300n-v2)
ucidef_set_led_netdev "wifi_led" "wifi" "red:wlan" "wlan0"
ucidef_set_led_switch "wan" "wan" "green:wan" "switch0" "0x1"
diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
index 8bbcbb2190..b741b4f9b4 100755
--- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
@@ -46,6 +46,7 @@ ramips_setup_interfaces()
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
;;
buffalo,wcr-1166ds|\
+ elecom,wrc-1167fs|\
wavlink,wl-wn577a2)
ucidef_add_switch "switch0" \
"3:lan" "4:wan" "6@eth0"
@@ -181,6 +182,10 @@ ramips_setup_macs()
zyxel,keenetic-extra-ii)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1)
;;
+ elecom,wrc-1167fs)
+ wan_mac=$(mtd_get_mac_binary factory 0x22)
+ label_mac=$wan_mac
+ ;;
hilink,hlk-7628n)
lan_mac=$(macaddr_setbit_la "$(cat /sys/class/net/eth0/address)")
wan_mac=$(macaddr_add "$lan_mac" 1)