aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorLars Wessels <software@bytebox.org>2020-06-25 21:09:59 +0200
committerDavid Bauer <mail@david-bauer.net>2020-06-29 01:08:01 +0200
commitdbaf0d20bb6afec4a592456af6b1238b46fa1acb (patch)
tree6d6d2a66cc28bfc036847f375d947ff164fdcf51 /target/linux
parent5234593462bc72582fafd0769d3b679f9b598574 (diff)
downloadupstream-dbaf0d20bb6afec4a592456af6b1238b46fa1acb.tar.gz
upstream-dbaf0d20bb6afec4a592456af6b1238b46fa1acb.tar.bz2
upstream-dbaf0d20bb6afec4a592456af6b1238b46fa1acb.zip
ramips: add support for WAVLINK WL-WN577A2
This commit adds support for the Wavlink WL-WN577A2 (black case) dual-band wall-plug wireless router. In Germany this device is sold under the brand name Maginon WL-755 (white case): Device specifications: - CPU: MediaTek MT7628AN (580MHz) - Flash: 8MB - RAM: 64MB - Bootloader: U-Boot - Ethernet: 2x 10/100 Mbps (Ralink RT3050) - 2.4 GHz: 802.11b/g/n SoC - 5 GHz: 802.11a/n/ac MT7610E - Antennas: internal - 4 green LEDs: 1 programmable (WPS) + LAN, WAN, POWER - Buttons: Reset, WPS - Small sliding power switch Flashing instructions (U-boot): - Configure a TFTP server on your PC/Laptop and set its IP to 192.168.10.100 - Rename the OpenWrt image to firmware.bin and place it in the root folder of the TFTP server - Power off (using the small sliding power switch on the left side) the device and connect an ethernet cable from its LAN or WAN port to your PC/Laptop - Press the WPS button (and keep it pressed) - Power on the device (using the small power switch) - After a few seconds, when the WAN/LAN LED stops blinking very fast, release the WPS button - Flashing OpenWrt takes less than a minute, system will reboot automatically - After reboot the WPS LED will indicate the current OpenWrt running status Signed-off-by: Lars Wessels <software@bytebox.org> [removed unused labels - fix whitespace errors - wrap commit message] Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ramips/dts/mt7628an_wavlink_wl-wn577a2.dts137
-rw-r--r--target/linux/ramips/image/mt76x8.mk10
-rwxr-xr-xtarget/linux/ramips/mt76x8/base-files/etc/board.d/01_leds4
-rwxr-xr-xtarget/linux/ramips/mt76x8/base-files/etc/board.d/02_network7
4 files changed, 157 insertions, 1 deletions
diff --git a/target/linux/ramips/dts/mt7628an_wavlink_wl-wn577a2.dts b/target/linux/ramips/dts/mt7628an_wavlink_wl-wn577a2.dts
new file mode 100644
index 0000000000..41dfec3275
--- /dev/null
+++ b/target/linux/ramips/dts/mt7628an_wavlink_wl-wn577a2.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#include "mt7628an.dtsi"
+
+/ {
+ compatible = "wavlink,wl-wn577a2", "maginon,wlr-755", "mediatek,mt7628an-soc";
+ model = "WAVLINK WL-WN577A2";
+
+ aliases {
+ led-boot = &led_wps;
+ led-failsafe = &led_wps;
+ led-running = &led_wps;
+ led-upgrade = &led_wps;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "wl-wn577a2:green:lan";
+ gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "wl-wn577a2:green:wan";
+ gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+ };
+
+ led_wps: wps {
+ label = "wl-wn577a2:green:wps";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "i2c", "wdt", "p0led_an", "p3led_an", "p4led_an";
+ function = "gpio";
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&usbphy {
+ status = "disabled";
+};
+
+&ehci {
+ status = "disabled";
+};
+
+&ohci {
+ status = "disabled";
+};
diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk
index a18afefd74..605537ace3 100644
--- a/target/linux/ramips/image/mt76x8.mk
+++ b/target/linux/ramips/image/mt76x8.mk
@@ -556,6 +556,16 @@ define Device/wavlink_wl-wn575a3
endef
TARGET_DEVICES += wavlink_wl-wn575a3
+define Device/wavlink_wl-wn577a2
+ IMAGE_SIZE := 7872k
+ DEVICE_VENDOR := Wavlink
+ DEVICE_MODEL := WL-WN577A2
+ DEVICE_ALT0_VENDOR := Maginon
+ DEVICE_ALT0_MODEL := WLR-755
+ DEVICE_PACKAGES := kmod-mt76x0e
+endef
+TARGET_DEVICES += wavlink_wl-wn577a2
+
define Device/widora_neo-16m
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Widora
diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
index fc582becb9..9db39cbdde 100755
--- a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
@@ -122,6 +122,10 @@ wavlink,wl-wn575a3)
ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan1" "50" "84"
ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan1" "85" "100"
;;
+wavlink,wl-wn577a2)
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x8"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
+ ;;
zbtlink,zbt-we1226)
set_wifi_led "$boardname:green:wlan"
ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x01"
diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
index 2b4ca0926f..1cccc16415 100755
--- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
@@ -38,7 +38,8 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
;;
- buffalo,wcr-1166ds)
+ buffalo,wcr-1166ds|\
+ wavlink,wl-wn577a2)
ucidef_add_switch "switch0" \
"3:lan" "4:wan" "6@eth0"
;;
@@ -186,6 +187,10 @@ ramips_setup_macs()
wiznet,wizfi630s)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x28)" 1)
;;
+ wavlink,wl-wn577a2)
+ wan_mac=$(mtd_get_mac_binary factory 0x2e)
+ label_mac=$(mtd_get_mac_binary factory 0x4)
+ ;;
skylab,skw92a|\
totolink,lr1200)
wan_mac=$(mtd_get_mac_binary factory 0x2e)