diff options
author | Enrico Mioso <mrkiko.rs@gmail.com> | 2020-01-17 13:15:52 +0100 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-01-21 14:15:48 +0100 |
commit | b99b60b2f164cb62212dd9812ddc8ce8df9f90a9 (patch) | |
tree | aef2081a247d8db840f886e671fb10539f39be68 /target/linux | |
parent | 83708f233daceacebd1c49da44711cc87b49162a (diff) | |
download | upstream-b99b60b2f164cb62212dd9812ddc8ce8df9f90a9.tar.gz upstream-b99b60b2f164cb62212dd9812ddc8ce8df9f90a9.tar.bz2 upstream-b99b60b2f164cb62212dd9812ddc8ce8df9f90a9.zip |
ath79: add support for TP-Link TL-MR6400
This device is an LTE router supported in ar71xx so far.
As per original commit, hardware specifications (v1.0 EU):
- SoC: QCA9531
- Flash: Winbond W25Q64FV (8MiB)
- RAM: EtronTech EM6AB160TSE-5G (64MiB)
- Wireless: SoC platform only (2.4GHz b/g/n, 2x internal antenna)
- Ethernet: 2NIC (3x100M + 1x100M)
- WWAN: TP-LINK LTE MODULE (2x external detachable antenna)
- Power: DC 12V 1A
Flashing instructions:
You can flash via tftp recovery (serve factory image as /mr6400_tp_recovery.bin
on 192.168.0.66/24, connect to any ethernet port and power on device while
holding the reset button). Flashing via OEM web interface does not work.
Known issues:
- LTE module does not always come up during boot (showing USB enumeration errors). Similar behavior has been reported at least from one user for ar71xx, too. Turning USB off and on again will serve as a workaround.
- eth0 (LAN) always shows carrier as 1 even if no cable is plugged in (this works "correctly" on ar71xx)
Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
[several adjustments]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Filip Moc <lede@moc6.cz>
Diffstat (limited to 'target/linux')
4 files changed, 189 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/qca9531_tplink_tl-mr6400-v1.dts b/target/linux/ath79/dts/qca9531_tplink_tl-mr6400-v1.dts new file mode 100644 index 0000000000..7299257cda --- /dev/null +++ b/target/linux/ath79/dts/qca9531_tplink_tl-mr6400-v1.dts @@ -0,0 +1,167 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "qca953x.dtsi" + +/ { + compatible = "tplink,tl-mr6400-v1", "qca,qca9531"; + model = "TP-Link TL-MR6400 v1"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + label-mac-device = &wmac; + }; + + leds { + compatible = "gpio-leds"; + + /* D12 */ + wan { + label = "tp-link:white:wan"; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + }; + + /* D11 */ + 4g { + label = "tp-link:white:4g"; + gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + }; + + /* D5 */ + wps { + label = "tp-link:white:wps"; + gpios = <&gpio 3 GPIO_ACTIVE_HIGH>; + }; + + /* D3 */ + wlan { + label = "tp-link:white:wlan"; + gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; + }; + + /* D2 */ + led_power: power { + label = "tp-link:white:power"; + gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; + }; + + /* D4 */ + lan { + label = "tp-link:white:lan"; + gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + + /* SW2 */ + reset { + label = "Reset button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + + /* SW3 */ + rfkill { + label = "RF kill button"; + linux,code = <KEY_RFKILL>; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + gpio-export { + compatible = "gpio-export"; + + gpio_usb_power { + gpio-export,name = "tp-link:power:lte"; + gpio-export,output = <0>; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart { + status = "okay"; +}; + +&spi { + status = "okay"; + + num-cs = <1>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot: partition@0 { + label = "u-boot"; + reg = <0x000000 0x020000>; + read-only; + }; + + partition@20000 { + compatible = "tplink,firmware"; + label = "firmware"; + reg = <0x020000 0x7d0000>; + }; + + art: partition@7f0000 { + label = "art"; + reg = <0x7f0000 0x010000>; + read-only; + }; + }; + }; +}; + +ð0 { + status = "okay"; + + phy-handle = <&swphy0>; + + mtd-mac-address = <&uboot 0x1fc00>; + mtd-mac-address-increment = <1>; +}; + +ð1 { + mtd-mac-address = <&uboot 0x1fc00>; + mtd-mac-address-increment = <(-1)>; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&uboot 0x1fc00>; +}; + +&usb0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + hub_port: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; + +&usb_phy { + status = "okay"; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index de4e8b4a7f..1023ba7a39 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -215,6 +215,11 @@ tplink,re450-v2) ucidef_set_led_netdev "lan_data" "LAN Data" "tp-link:green:lan_data" "eth0" "tx rx" ucidef_set_led_netdev "lan_link" "LAN Link" "tp-link:green:lan_link" "eth0" "link" ;; +tplink,tl-mr6400-v1) + ucidef_set_led_switch "lan" "LAN" "tp-link:white:lan" "switch0" "0x0e" + ucidef_set_led_netdev "wan" "WAN" "tp-link:white:wan" "eth1" + ucidef_set_led_netdev "4g" "4G" "tp-link:white:4g" "usb0" + ;; tplink,tl-wr842n-v2) ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1" ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04" diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index a96b504d5a..0bae9dc384 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -236,6 +236,11 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "1:wan" ;; + tplink,tl-mr6400-v1) + ucidef_set_interfaces_lan_wan "eth0.1 eth1" "usb0" + ucidef_add_switch "switch0" \ + "0@eth0" "1:lan:1" "2:lan:3" "3:lan:2" + ;; tplink,tl-wr842n-v2) ucidef_set_interface_wan "eth1" ucidef_add_switch "switch0" \ diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index a7266f05a9..53138e343b 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -374,6 +374,18 @@ define Device/tplink_re450-v2 endef TARGET_DEVICES += tplink_re450-v2 +define Device/tplink_tl-mr6400-v1 + $(Device/tplink-8mlzma) + SOC := qca9531 + DEVICE_MODEL := TL-MR6400 + DEVICE_VARIANT := v1 + TPLINK_HWID := 0x64000001 + DEVICE_PACKAGES := kmod-usb2 kmod-usb-net kmod-usb-net-rndis kmod-usb-serial \ + kmod-usb-serial-option adb-enablemodem + SUPPORTED_DEVICES += tl-mr6400 +endef +TARGET_DEVICES += tplink_tl-mr6400-v1 + define Device/tplink_tl-wdr3500-v1 $(Device/tplink-8mlzma) SOC := ar9344 |