aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorVladimir Vid <vladimir.vid@sartura.hr>2020-06-01 17:51:37 +0200
committerPetr Štetiar <ynezz@true.cz>2020-11-23 22:53:15 +0100
commitc0af4a0ca259022d9d2dedcfb31e11ab46e443c2 (patch)
treeb6189cf718a6ac6372fb1f387abf35df89ebd968 /target/linux
parent651f0c09999f2b10b412bdd3f60d4711034e5a90 (diff)
downloadupstream-c0af4a0ca259022d9d2dedcfb31e11ab46e443c2.tar.gz
upstream-c0af4a0ca259022d9d2dedcfb31e11ab46e443c2.tar.bz2
upstream-c0af4a0ca259022d9d2dedcfb31e11ab46e443c2.zip
mvebu: add initial support for Globalscale ESPRESSObin-Ultra
This patch adds support for Globalscale ESPRESSObin-Ultra. Device uses the same Armada-3720 SoC with extended hardware support. - SoC: Armada-3720 - RAM: 1 GB DDR4 - Flash: 4MB SPI NOR (mx25u3235f) + 8 GB eMMC - Ethernet: Topaz 6341 88e6341 (4x GB LAN + 1x WAN with 30W PoE) - WiFI: 2x2 802.11ac Wi-Fi marvell (88w8997 PCIe+USB) - 1x USB 2.0 port - 1x USB 3.0 port - 1x microSD slot - 1x mini-PCIe slot (USB [with nano-sim slot]) - 1x mini-USB debug UART - 1x RTC Clock and battery - 1x reset button - 1x power button - 4x LED (RGBY) - Optional 1x M.2 2280 slot ** Installation ** Copy dtb from build_dir to bin/ and run tftpserver there: $ cp ./build_dir/target-aarch64_cortex-a53_musl/linux-mvebu_cortexa53/ linux-5.4.65/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dtb bin/targets/mvebu/cortexa53/ $ in.tftpd -L -s bin/targets/mvebu/cortexa53/ Connect to the device UART via microUSB port on the back side and power on the device. Power on the device and hit any key to stop the autoboot. Set serverip (host IP) and ipaddr (any free IP address on the same subnet), e.g: $ setenv serverip 192.168.1.10 # Host $ setenv ipaddr 192.168.1.15 # Device Ping server to confirm network is working: $ ping $serverip Using neta@30000 device host 192.168.1.15 is alive Tftpboot the firmware: $ tftpboot $kernel_addr_r openwrt-mvebu-cortexa53-globalscale_espressobin-ultra-initramfs-kernel.bin $ tftpboot $fdt_addr_r armada-3720-espressobin-ultra.dtb Set the console and boot the image: $ setenv bootargs $console $ booti $kernel_addr_r - $fdt_addr_r Once the initramfs is booted, transfer openwrt-mvebu-cortexa53-globalscale_espressobin-ultra-squashfs-sdcard.img.gz to /tmp dir on the device. Gunzip and dd the image: $ gunzip /tmp/openwrt-mvebu-cortexa53-globalscale_espressobin-ultra-squashfs-sdcard.img.gz $ dd if=/tmp/openwrt-mvebu-cortexa53-globalscale_espressobin-ultra-squashfs-sdcard.img of=/dev/mmcblk0 && sync Reboot the device. Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/mvebu/cortexa53/base-files/etc/board.d/02_network3
-rwxr-xr-xtarget/linux/mvebu/cortexa53/base-files/lib/upgrade/platform.sh3
-rw-r--r--target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts241
-rw-r--r--target/linux/mvebu/image/cortexa53.mk11
4 files changed, 258 insertions, 0 deletions
diff --git a/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network b/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network
index 0a2a2b144c..c945251e4e 100755
--- a/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network
+++ b/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network
@@ -18,6 +18,9 @@ globalscale,espressobin-v7|\
globalscale,espressobin-v7-emmc)
ucidef_set_interfaces_lan_wan "lan0 lan1" "wan"
;;
+globalscale,espressobin-ultra)
+ ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" "wan"
+ ;;
marvell,armada-3720-db|\
methode,udpu)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
diff --git a/target/linux/mvebu/cortexa53/base-files/lib/upgrade/platform.sh b/target/linux/mvebu/cortexa53/base-files/lib/upgrade/platform.sh
index cdf5933272..1153fd8f38 100755
--- a/target/linux/mvebu/cortexa53/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mvebu/cortexa53/base-files/lib/upgrade/platform.sh
@@ -11,6 +11,7 @@ platform_check_image() {
case "$(board_name)" in
globalscale,espressobin|\
globalscale,espressobin-emmc|\
+ globalscale,espressobin-ultra|\
globalscale,espressobin-v7|\
globalscale,espressobin-v7-emmc)
platform_check_image_sdcard "$1"
@@ -25,6 +26,7 @@ platform_do_upgrade() {
case "$(board_name)" in
globalscale,espressobin|\
globalscale,espressobin-emmc|\
+ globalscale,espressobin-ultra|\
globalscale,espressobin-v7|\
globalscale,espressobin-v7-emmc)
platform_do_upgrade_sdcard "$1"
@@ -41,6 +43,7 @@ platform_copy_config() {
case "$(board_name)" in
globalscale,espressobin|\
globalscale,espressobin-emmc|\
+ globalscale,espressobin-ultra|\
globalscale,espressobin-v7|\
globalscale,espressobin-v7-emmc)
platform_copy_config_sdcard
diff --git a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
new file mode 100644
index 0000000000..669b67e5a9
--- /dev/null
+++ b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for ESPRESSObin-Ultra
+ * Copyright (C) 2019 Globalscale technologies, Inc.
+ *
+ * Jason Hung <jhung@globalscaletechnologies.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-372x.dtsi"
+
+/ {
+ model = "Globalscale Marvell ESPRESSOBin Ultra Board";
+ compatible = "globalscale,espressobin-ultra", "marvell,armada3720",
+ "marvell,armada3710";
+
+ aliases {
+ /* for dsa slave device */
+ ethernet1 = &switch0port1;
+ ethernet2 = &switch0port2;
+ ethernet3 = &switch0port3;
+ ethernet4 = &switch0port4;
+ ethernet5 = &switch0port5;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+ };
+
+ reg_usb3_vbus: usb3-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb3-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpionb 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb3_phy: usb3-phy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&reg_usb3_vbus>;
+ };
+
+ leds {
+ pinctrl-names = "default";
+ compatible = "gpio-leds";
+ /* No assigned functions to the LEDs by default */
+ led1 {
+ label = "ebin-ultra:blue:led1";
+ gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
+ };
+ led2 {
+ label = "ebin-ultra:green:led2";
+ gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
+ };
+ led3 {
+ label = "ebin-ultra:red:led3";
+ gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
+ };
+ led4 {
+ label = "ebin-ultra:yellow:led4";
+ gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&sdhci0 {
+ status = "okay";
+ non-removable;
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+ marvell,pad-type = "fixed-1-8v";
+};
+
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_quad_pins>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <108000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "firmware";
+ reg = <0x0 0x3e0000>;
+ };
+ partition@3e0000 {
+ label = "hw-info";
+ reg = <0x3e0000 0x10000>;
+ read-only;
+ };
+ partition@3f0000 {
+ label = "u-boot-env";
+ reg = <0x3f0000 0x10000>;
+ };
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+};
+
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ clock-frequency = <100000>;
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&usb3 {
+ status = "okay";
+ usb-phy = <&usb3_phy>;
+};
+
+&usb2 {
+ status = "okay";
+};
+
+&eth0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii-id";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ extphy: ethernet-phy@0 {
+ reg = <1>;
+ };
+
+ switch0: switch0@1 {
+ compatible = "marvell,mv88e6085";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ dsa,member = <0 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0port0: port@0 {
+ reg = <0>;
+ label = "cpu";
+ ethernet = <&eth0>;
+ };
+
+ switch0port1: port@1 {
+ reg = <1>;
+ label = "lan0";
+ phy-handle = <&switch0phy1>;
+ };
+
+ switch0port2: port@2 {
+ reg = <2>;
+ label = "lan1";
+ phy-handle = <&switch0phy2>;
+ };
+
+ switch0port3: port@3 {
+ reg = <3>;
+ label = "lan2";
+ phy-handle = <&switch0phy3>;
+ };
+
+ switch0port4: port@4 {
+ reg = <4>;
+ label = "lan3";
+ phy-handle = <&switch0phy4>;
+ };
+
+ switch0port5: port@5 {
+ reg = <5>;
+ label = "wan";
+ phy-handle = <&extphy>;
+ phy-mode = "sgmii";
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0phy1: switch0phy1@11 {
+ reg = <0x11>;
+ };
+ switch0phy2: switch0phy2@12 {
+ reg = <0x12>;
+ };
+ switch0phy3: switch0phy3@13 {
+ reg = <0x13>;
+ };
+ switch0phy4: switch0phy4@14 {
+ reg = <0x14>;
+ };
+ };
+ };
+};
diff --git a/target/linux/mvebu/image/cortexa53.mk b/target/linux/mvebu/image/cortexa53.mk
index b65f25472c..6a3a568655 100644
--- a/target/linux/mvebu/image/cortexa53.mk
+++ b/target/linux/mvebu/image/cortexa53.mk
@@ -32,6 +32,17 @@ define Device/globalscale_espressobin-emmc
endef
TARGET_DEVICES += globalscale_espressobin-emmc
+define Device/globalscale_espressobin-ultra
+ $(call Device/Default-arm64)
+ DEVICE_VENDOR := Marvell
+ DEVICE_MODEL := ESPRESSObin
+ DEVICE_VARIANT := Ultra
+ DEVICE_PACKAGES += kmod-i2c-pxa kmod-rtc-pcf8563
+ SOC := armada-3720
+ BOOT_SCRIPT := espressobin
+endef
+TARGET_DEVICES += globalscale_espressobin-ultra
+
define Device/globalscale_espressobin-v7
$(call Device/Default-arm64)
DEVICE_VENDOR := Marvell