aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorHenryk Heisig <hyniu@o2.pl>2017-06-16 15:26:30 +0200
committerPiotr Dymacz <pepe2k@gmail.com>2017-06-29 10:37:36 +0200
commitb05c7193fd289ff697324caccf77adf9ffa76373 (patch)
treee6a96df1048c168ef6f7b3f484a0e5fbaaf27bd9 /target/linux
parent01280bc8dc1d9ca089fad7b231d718e166698f4a (diff)
downloadupstream-b05c7193fd289ff697324caccf77adf9ffa76373.tar.gz
upstream-b05c7193fd289ff697324caccf77adf9ffa76373.tar.bz2
upstream-b05c7193fd289ff697324caccf77adf9ffa76373.zip
ar71xx: add support for TP-Link Archer C58 v1
TP-Link Archer C58 v1 is a dual-band AC1350 router, based on Qualcomm QCA9561 + QCA9886. It looks like Archer C59 v1 without USB port. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 6x LED, 3x button - UART header on PCB, RX, TX at TP4+5 (backside) QCA9886 wlan needs pre_cal_data file and enable ieee80211 phy hotplug to patch macaddress. Flash instruction: Use "factory" image directly in vendor GUI. Recovery method: 1. Set PC to fixed ip address 192.168.0.66/24. 2. Download "lede-ar71xx-generic-archer-c58-v1-squashfs-factory.bin" and rename it to "tp_recovery.bin". 3. Start a tftp server with the file "tp_recovery.bin" in its root directory. 4. Turn off the router. 5. Press and hold Reset button. 6. Turn on router with the reset button pressed and wait ~15 seconds. 7. Release the reset button and after a short time the firmware should be transferred from the tftp server. 8. Wait ~30 second to complete recovery. Flash instruction under U-Boot, using UART: tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin erase 0x9f020000 +$filesize cp.b $fileaddr 0x9f020000 $filesize reset This commit is based on GitHub PR#1112 Signed-off-by: Henryk Heisig <hyniu@o2.pl>
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/01_leds1
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ar71xx/base-files/etc/diag.sh1
-rw-r--r--target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata7
-rw-r--r--target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac21
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ar71xx/config-4.41
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt10
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Makefile1
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c64
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h1
-rw-r--r--target/linux/ar71xx/image/tp-link.mk13
-rw-r--r--target/linux/ar71xx/mikrotik/config-default1
-rw-r--r--target/linux/ar71xx/nand/config-default1
15 files changed, 120 insertions, 7 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index d80efefc34..de9072e55c 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -63,6 +63,7 @@ archer-c25-v1)
ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04"
ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02"
;;
+archer-c58-v1|\
archer-c59-v1|\
archer-c60-v1)
ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x1E"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index a7a9921faf..311e091da7 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -217,6 +217,7 @@ ar71xx_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
;;
+ archer-c58-v1|\
archer-c59-v1|\
rb-450g)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 0bb338a573..2d2a6788a7 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -52,6 +52,7 @@ get_status_led() {
status_led="ap135:green:status"
;;
archer-c25-v1|\
+ archer-c58-v1|\
archer-c59-v1|\
archer-c60-v1|\
fritz300e|\
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 91db049c44..ecbc9b8163 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -134,6 +134,13 @@ case "$FIRMWARE" in
;;
esac
;;
+"ath10k/pre-cal-pci-0000:00:00.0.bin")
+ case $board in
+ archer-c58-v1)
+ ath10kcal_extract "art" 20480 12064
+ ;;
+ esac
+ ;;
*)
exit 1
;;
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
new file mode 100644
index 0000000000..7d2eca546d
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -0,0 +1,21 @@
+#!/bin/ash
+
+[ "$ACTION" == "add" ] || exit 0
+
+PHYNBR=${DEVPATH##*/phy}
+
+[ -n $PHYNBR ] || exit 0
+
+. /lib/ar71xx.sh
+. /lib/functions/system.sh
+
+board=$(ar71xx_board_name)
+
+case "$board" in
+ archer-c58-v1)
+ echo $(macaddr_add $(mtd_get_mac_binary mac 8) $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress
+ ;;
+ *)
+ ;;
+esac
+
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 3f781a8e5c..df8c6d7283 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -449,6 +449,9 @@ ar71xx_board_detect() {
*"Archer C5")
name="archer-c5"
;;
+ *"Archer C58 v1")
+ name="archer-c58-v1"
+ ;;
*"Archer C59 v1")
name="archer-c59-v1"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 454af2c3e6..85fc1e9122 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -207,6 +207,7 @@ platform_check_image() {
ap531b0|\
ap90q|\
archer-c25-v1|\
+ archer-c58-v1|\
archer-c59-v1|\
archer-c60-v1|\
bullet-m|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 8be13e16cd..6abd7a4021 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -52,6 +52,7 @@ CONFIG_ATH79_MACH_AP531B0=y
CONFIG_ATH79_MACH_AP90Q=y
CONFIG_ATH79_MACH_AP96=y
CONFIG_ATH79_MACH_ARCHER_C25_V1=y
+CONFIG_ATH79_MACH_ARCHER_C58_V1=y
CONFIG_ATH79_MACH_ARCHER_C59_V1=y
CONFIG_ATH79_MACH_ARCHER_C60_V1=y
CONFIG_ATH79_MACH_ARCHER_C7=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 0ae9a11ff6..0584e3896b 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1328,6 +1328,16 @@ config ATH79_MACH_ARCHER_C25_V1
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
+config ATH79_MACH_ARCHER_C58_V1
+ bool "TP-LINK Archer C58 v1 support"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_ARCHER_C59_V1
bool "TP-LINK Archer C59 v1 support"
select SOC_QCA956X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 869920ca30..dd0b729996 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_ATH79_MACH_AP531B0) += mach-ap531b0.o
obj-$(CONFIG_ATH79_MACH_AP90Q) += mach-ap90q.o
obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C25_V1) += mach-archer-c25-v1.o
+obj-$(CONFIG_ATH79_MACH_ARCHER_C58_V1) += mach-archer-c59-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C59_V1) += mach-archer-c59-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V1) += mach-archer-c60-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
index d55f9b9f75..f385d4a5a3 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
@@ -1,7 +1,7 @@
/*
- * TP-Link Archer C59 v1 board support
+ * TP-Link Archer C58/C59 v1 board support
*
- * Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
+ * Copyright (C) 2017 Henryk Heisig <hyniu@o2.pl>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
@@ -65,6 +65,44 @@
#define ARCHER_C59_V1_WMAC_CALDATA_OFFSET 0x1000
#define ARCHER_C59_V1_PCI_CALDATA_OFFSET 0x5000
+static struct gpio_led archer_c58_v1_leds_gpio[] __initdata = {
+ {
+ .name = "archer-c58-v1:green:power",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c58-v1:green:wlan2g",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN2,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c58-v1:green:wlan5g",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN5,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c58-v1:green:lan",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_LAN,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c58-v1:green:wan",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c58-v1:amber:wan",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_AMBER,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c58-v1:green:wps",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WPS,
+ .active_low = 1,
+ },
+};
+
static struct gpio_led archer_c59_v1_leds_gpio[] __initdata = {
{
.name = "archer-c59-v1:green:power",
@@ -177,7 +215,7 @@ static struct spi_board_info archer_c59_v1_spi_info[] = {
},
};
-static void __init archer_c59_v1_setup(void)
+static void __init archer_c5x_v1_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f010008);
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
@@ -187,9 +225,6 @@ static void __init archer_c59_v1_setup(void)
ARRAY_SIZE(archer_c59_v1_spi_info));
platform_device_register(&archer_c59_v1_spi_device);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c59_v1_leds_gpio),
- archer_c59_v1_leds_gpio);
-
ath79_register_gpio_keys_polled(-1, ARCHER_C59_V1_KEYS_POLL_INTERVAL,
ARRAY_SIZE(archer_c59_v1_gpio_keys),
archer_c59_v1_gpio_keys);
@@ -233,5 +268,22 @@ static void __init archer_c59_v1_setup(void)
"LED reset");
}
+static void __init archer_c58_v1_setup(void)
+{
+ archer_c5x_v1_setup();
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c58_v1_leds_gpio),
+ archer_c58_v1_leds_gpio);
+}
+
+MIPS_MACHINE(ATH79_MACH_ARCHER_C58_V1, "ARCHER-C58-V1",
+ "TP-LINK Archer C58 v1", archer_c58_v1_setup);
+
+static void __init archer_c59_v1_setup(void)
+{
+ archer_c5x_v1_setup();
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c59_v1_leds_gpio),
+ archer_c59_v1_leds_gpio);
+}
+
MIPS_MACHINE(ATH79_MACH_ARCHER_C59_V1, "ARCHER-C59-V1",
"TP-LINK Archer C59 v1", archer_c59_v1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 618abfb1dc..dde6d9735a 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -42,6 +42,7 @@ enum ath79_mach_type {
ATH79_MACH_AP96, /* Atheros AP96 */
ATH79_MACH_ARCHER_C25_V1, /* TP-LINK Archer C25 V1 board */
ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */
+ ATH79_MACH_ARCHER_C58_V1, /* TP-LINK Archer C58 V1 board */
ATH79_MACH_ARCHER_C59_V1, /* TP-LINK Archer C59 V1 board */
ATH79_MACH_ARCHER_C60_V1, /* TP-LINK Archer C60 V1 board */
ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
index 243c15a858..0979505a78 100644
--- a/target/linux/ar71xx/image/tp-link.mk
+++ b/target/linux/ar71xx/image/tp-link.mk
@@ -137,6 +137,17 @@ define Device/archer-c25-v1
MTDPARTS := spi0.0:128k(factory-uboot)ro,64k(u-boot)ro,1536k(kernel),6272k(rootfs),128k(config)ro,64k(art)ro,7808k@0x30000(firmware)
endef
+define Device/archer-c58-v1
+ $(Device/archer-cxx)
+ DEVICE_TITLE := TP-LINK Archer C58 v1
+ DEVICE_PACKAGES := kmod-ath10k
+ BOARDNAME := ARCHER-C58-V1
+ TPLINK_BOARD_NAME := ARCHER-C58-V1
+ DEVICE_PROFILE := ARCHERC58V1
+ IMAGE_SIZE := 7936k
+ MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,1344k(kernel),6592k(rootfs),64k(tplink)ro,64k(art)ro,7936k@0x20000(firmware)
+endef
+
define Device/archer-c59-v1
$(Device/archer-cxx)
DEVICE_TITLE := TP-LINK Archer C59 v1
@@ -158,7 +169,7 @@ define Device/archer-c60-v1
IMAGE_SIZE := 7936k
MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,1344k(kernel),6592k(rootfs),64k(tplink)ro,64k(art)ro,7936k@0x20000(firmware)
endef
-TARGET_DEVICES += archer-c25-v1 archer-c59-v1 archer-c60-v1
+TARGET_DEVICES += archer-c25-v1 archer-c58-v1 archer-c59-v1 archer-c60-v1
define Device/archer-c5-v1
$(Device/tplink-16mlzma)
diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
index 6b87871b9a..ac9ba1bd28 100644
--- a/target/linux/ar71xx/mikrotik/config-default
+++ b/target/linux/ar71xx/mikrotik/config-default
@@ -17,6 +17,7 @@
# CONFIG_ATH79_MACH_AP90Q is not set
# CONFIG_ATH79_MACH_AP96 is not set
# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
+# CONFIG_ATH79_MACH_ARCHER_C58_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C7 is not set
diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default
index 0e1827663a..9a96830fbd 100644
--- a/target/linux/ar71xx/nand/config-default
+++ b/target/linux/ar71xx/nand/config-default
@@ -17,6 +17,7 @@
# CONFIG_ATH79_MACH_AP90Q is not set
# CONFIG_ATH79_MACH_AP96 is not set
# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
+# CONFIG_ATH79_MACH_ARCHER_C58_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C7 is not set