aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorLars-Peter Clausen <lars@metafoo.de>2010-08-29 21:10:59 +0000
committerLars-Peter Clausen <lars@metafoo.de>2010-08-29 21:10:59 +0000
commit429c8a56b6b9a1ada2d10d17488b29590232c579 (patch)
treed77f05c13a8ff26133fad3669a81903c31db9112 /target/linux
parent014765e77cc3ae594f482ac98f9ca4fa08c29981 (diff)
downloadupstream-429c8a56b6b9a1ada2d10d17488b29590232c579.tar.gz
upstream-429c8a56b6b9a1ada2d10d17488b29590232c579.tar.bz2
upstream-429c8a56b6b9a1ada2d10d17488b29590232c579.zip
Use kirkwood_nand_init instead of manually registering the nand driver
This fixes that the device would hang during boot. SVN-Revision: 22837
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/kirkwood/patches/100-dockstar.patch35
1 files changed, 4 insertions, 31 deletions
diff --git a/target/linux/kirkwood/patches/100-dockstar.patch b/target/linux/kirkwood/patches/100-dockstar.patch
index f6ac90b7a8..59334b4cda 100644
--- a/target/linux/kirkwood/patches/100-dockstar.patch
+++ b/target/linux/kirkwood/patches/100-dockstar.patch
@@ -38,7 +38,7 @@ Signed-off-by: Eric Cooper <ecc@xxxxxxx>
obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
--- /dev/null
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
-@@ -0,0 +1,148 @@
+@@ -0,0 +1,121 @@
+/*
+ * arch/arm/mach-kirkwood/dockstar-setup.c
+ *
@@ -61,7 +61,6 @@ Signed-off-by: Eric Cooper <ecc@xxxxxxx>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
-+#include <plat/orion_nand.h>
+#include "common.h"
+#include "mpp.h"
+
@@ -81,7 +80,7 @@ Signed-off-by: Eric Cooper <ecc@xxxxxxx>
+ }, {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = SZ_64M,
++ .size = SZ_32M,
+ }, {
+ .name = "data",
+ .offset = MTDPART_OFS_NXTBLK,
@@ -89,33 +88,6 @@ Signed-off-by: Eric Cooper <ecc@xxxxxxx>
+ },
+};
+
-+static struct resource dockstar_nand_resource = {
-+ .flags = IORESOURCE_MEM,
-+ .start = KIRKWOOD_NAND_MEM_PHYS_BASE,
-+ .end = KIRKWOOD_NAND_MEM_PHYS_BASE +
-+ KIRKWOOD_NAND_MEM_SIZE - 1,
-+};
-+
-+static struct orion_nand_data dockstar_nand_data = {
-+ .parts = dockstar_nand_parts,
-+ .nr_parts = ARRAY_SIZE(dockstar_nand_parts),
-+ .cle = 0,
-+ .ale = 1,
-+ .width = 8,
-+ .chip_delay = 25,
-+};
-+
-+static struct platform_device dockstar_nand_flash = {
-+ .name = "orion_nand",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &dockstar_nand_data,
-+ },
-+ .resource = &dockstar_nand_resource,
-+ .num_resources = 1,
-+};
-+
-+
+static struct mv643xx_eth_platform_data dockstar_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
@@ -172,9 +144,10 @@ Signed-off-by: Eric Cooper <ecc@xxxxxxx>
+ printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+ kirkwood_ehci_init();
+
++ kirkwood_nand_init(ARRAY_AND_SIZE(dockstar_nand_parts), 25);
++
+ kirkwood_ge00_init(&dockstar_ge00_data);
+
-+ platform_device_register(&dockstar_nand_flash);
+ platform_device_register(&dockstar_leds);
+}
+