kernel: bump 5.4 to 5.4.60

Deleted upstream patches:
  generic:
    041-genirq-affinity-Make-affinity-setting-if-activated-o.patch
  ipq806x:
    093-5-v5.8-ipq806x-PCI-qcom-Define-some-PARF-params-needed-for-ipq8064-SoC.patch
    093-6-v5.8-ipq806x-PCI-qcom-Add-support-for-tx-term-offset-for-rev-2_1_0.patch

Merged manually:
  ipq806x:
    093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch
  layerscape:
    804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch

Build-tested: ath79/generic, ipq806x, layerscape/armv7, layerscape/armv8_64b
Run-tested: ipq806x (R7800)

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

27 files changed, 132 insertions, 383 deletions

diff --git a/target/linux/bcm27xx/patches-5.4/950-0018-Register-the-clocks-early-during-the-boot-process-so.patch b/target/linux/bcm27xx/patches-5.4/950-0018-Register-the-clocks-early-during-the-boot-process-so.patch
index 40653989b4..322be7bc5c 100644
--- a/target/linux/bcm27xx/patches-5.4/950-0018-Register-the-clocks-early-during-the-boot-process-so.patch
+++ b/target/linux/bcm27xx/patches-5.4/950-0018-Register-the-clocks-early-during-the-boot-process-so.patch
@@ -13,7 +13,7 @@ Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
 
 --- a/drivers/clk/bcm/clk-bcm2835.c
 +++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -2248,8 +2248,15 @@ static int bcm2835_clk_probe(struct plat
+@@ -2265,8 +2265,15 @@ static int bcm2835_clk_probe(struct plat
  	if (ret)
  		return ret;
  
@@ -30,7 +30,7 @@ Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
  }
  
  static const struct cprman_plat_data cprman_bcm2835_plat_data = {
-@@ -2275,7 +2282,11 @@ static struct platform_driver bcm2835_cl
+@@ -2292,7 +2299,11 @@ static struct platform_driver bcm2835_cl
  	.probe          = bcm2835_clk_probe,
  };
  
diff --git a/target/linux/bcm27xx/patches-5.4/950-0020-clk-bcm2835-Mark-used-PLLs-and-dividers-CRITICAL.patch b/target/linux/bcm27xx/patches-5.4/950-0020-clk-bcm2835-Mark-used-PLLs-and-dividers-CRITICAL.patch
index 8baed2af49..63f116f68f 100644
--- a/target/linux/bcm27xx/patches-5.4/950-0020-clk-bcm2835-Mark-used-PLLs-and-dividers-CRITICAL.patch
+++ b/target/linux/bcm27xx/patches-5.4/950-0020-clk-bcm2835-Mark-used-PLLs-and-dividers-CRITICAL.patch
@@ -14,7 +14,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
 
 --- a/drivers/clk/bcm/clk-bcm2835.c
 +++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1363,6 +1363,11 @@ bcm2835_register_pll_divider(struct bcm2
+@@ -1379,6 +1379,11 @@ bcm2835_register_pll_divider(struct bcm2
  	divider->div.hw.init = &init;
  	divider->div.table = NULL;
  
diff --git a/target/linux/bcm27xx/patches-5.4/950-0021-clk-bcm2835-Add-claim-clocks-property.patch b/target/linux/bcm27xx/patches-5.4/950-0021-clk-bcm2835-Add-claim-clocks-property.patch
index 928fe23253..87113e8829 100644
--- a/target/linux/bcm27xx/patches-5.4/950-0021-clk-bcm2835-Add-claim-clocks-property.patch
+++ b/target/linux/bcm27xx/patches-5.4/950-0021-clk-bcm2835-Add-claim-clocks-property.patch
@@ -17,7 +17,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
 
 --- a/drivers/clk/bcm/clk-bcm2835.c
 +++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1295,6 +1295,8 @@ static const struct clk_ops bcm2835_vpu_
+@@ -1311,6 +1311,8 @@ static const struct clk_ops bcm2835_vpu_
  	.debug_init = bcm2835_clock_debug_init,
  };
  
@@ -26,7 +26,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman,
  					   const struct bcm2835_pll_data *data)
  {
-@@ -1311,6 +1313,9 @@ static struct clk_hw *bcm2835_register_p
+@@ -1327,6 +1329,9 @@ static struct clk_hw *bcm2835_register_p
  	init.ops = &bcm2835_pll_clk_ops;
  	init.flags = CLK_IGNORE_UNUSED;
  
@@ -36,7 +36,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
  	if (!pll)
  		return NULL;
-@@ -1364,8 +1369,10 @@ bcm2835_register_pll_divider(struct bcm2
+@@ -1380,8 +1385,10 @@ bcm2835_register_pll_divider(struct bcm2
  	divider->div.table = NULL;
  
  	if (!(cprman_read(cprman, data->cm_reg) & data->hold_mask)) {
@@ -49,7 +49,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  	}
  
  	divider->cprman = cprman;
-@@ -2173,6 +2180,8 @@ static const struct bcm2835_clk_desc clk
+@@ -2189,6 +2196,8 @@ static const struct bcm2835_clk_desc clk
  		.ctl_reg = CM_PERIICTL),
  };
  
@@ -58,7 +58,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  /*
   * Permanently take a reference on the parent of the SDRAM clock.
   *
-@@ -2192,6 +2201,19 @@ static int bcm2835_mark_sdc_parent_criti
+@@ -2208,6 +2217,19 @@ static int bcm2835_mark_sdc_parent_criti
  	return clk_prepare_enable(parent);
  }
  
@@ -78,7 +78,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  static int bcm2835_clk_probe(struct platform_device *pdev)
  {
  	struct device *dev = &pdev->dev;
-@@ -2202,6 +2224,7 @@ static int bcm2835_clk_probe(struct plat
+@@ -2218,6 +2240,7 @@ static int bcm2835_clk_probe(struct plat
  	const size_t asize = ARRAY_SIZE(clk_desc_array);
  	const struct cprman_plat_data *pdata;
  	size_t i;
@@ -86,7 +86,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  	int ret;
  
  	pdata = of_device_get_match_data(&pdev->dev);
-@@ -2221,6 +2244,13 @@ static int bcm2835_clk_probe(struct plat
+@@ -2237,6 +2260,13 @@ static int bcm2835_clk_probe(struct plat
  	if (IS_ERR(cprman->regs))
  		return PTR_ERR(cprman->regs);
  
diff --git a/target/linux/bcm27xx/patches-5.4/950-0022-clk-bcm2835-Read-max-core-clock-from-firmware.patch b/target/linux/bcm27xx/patches-5.4/950-0022-clk-bcm2835-Read-max-core-clock-from-firmware.patch
index b6d0b8173d..094eed705b 100644
--- a/target/linux/bcm27xx/patches-5.4/950-0022-clk-bcm2835-Read-max-core-clock-from-firmware.patch
+++ b/target/linux/bcm27xx/patches-5.4/950-0022-clk-bcm2835-Read-max-core-clock-from-firmware.patch
@@ -48,9 +48,9 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  	void __iomem *regs;
 +	struct rpi_firmware *fw;
  	spinlock_t regs_lock; /* spinlock for all clocks */
+ 	unsigned int soc;
  
- 	/*
-@@ -999,6 +1003,30 @@ static unsigned long bcm2835_clock_get_r
+@@ -1015,6 +1019,30 @@ static unsigned long bcm2835_clock_get_r
  	return bcm2835_clock_rate_from_divisor(clock, parent_rate, div);
  }
  
@@ -81,7 +81,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  static void bcm2835_clock_wait_busy(struct bcm2835_clock *clock)
  {
  	struct bcm2835_cprman *cprman = clock->cprman;
-@@ -1287,7 +1315,7 @@ static int bcm2835_vpu_clock_is_on(struc
+@@ -1303,7 +1331,7 @@ static int bcm2835_vpu_clock_is_on(struc
   */
  static const struct clk_ops bcm2835_vpu_clock_clk_ops = {
  	.is_prepared = bcm2835_vpu_clock_is_on,
@@ -90,7 +90,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  	.set_rate = bcm2835_clock_set_rate,
  	.determine_rate = bcm2835_clock_determine_rate,
  	.set_parent = bcm2835_clock_set_parent,
-@@ -2223,6 +2251,7 @@ static int bcm2835_clk_probe(struct plat
+@@ -2239,6 +2267,7 @@ static int bcm2835_clk_probe(struct plat
  	const struct bcm2835_clk_desc *desc;
  	const size_t asize = ARRAY_SIZE(clk_desc_array);
  	const struct cprman_plat_data *pdata;
@@ -98,7 +98,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  	size_t i;
  	u32 clk_id;
  	int ret;
-@@ -2244,6 +2273,14 @@ static int bcm2835_clk_probe(struct plat
+@@ -2260,6 +2289,14 @@ static int bcm2835_clk_probe(struct plat
  	if (IS_ERR(cprman->regs))
  		return PTR_ERR(cprman->regs);
  
diff --git a/target/linux/bcm27xx/patches-5.4/950-0023-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch b/target/linux/bcm27xx/patches-5.4/950-0023-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch
index b01c267035..bee256b030 100644
--- a/target/linux/bcm27xx/patches-5.4/950-0023-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch
+++ b/target/linux/bcm27xx/patches-5.4/950-0023-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch
@@ -20,7 +20,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net>
 
 --- a/drivers/clk/bcm/clk-bcm2835.c
 +++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1455,6 +1455,15 @@ static struct clk_hw *bcm2835_register_c
+@@ -1471,6 +1471,15 @@ static struct clk_hw *bcm2835_register_c
  	init.flags = data->flags | CLK_IGNORE_UNUSED;
  
  	/*
diff --git a/target/linux/bcm27xx/patches-5.4/950-0179-clk-clk-bcm2835-Use-zd-when-printing-size_t.patch b/target/linux/bcm27xx/patches-5.4/950-0179-clk-clk-bcm2835-Use-zd-when-printing-size_t.patch
index c5285056fe..717822f5cd 100644
--- a/target/linux/bcm27xx/patches-5.4/950-0179-clk-clk-bcm2835-Use-zd-when-printing-size_t.patch
+++ b/target/linux/bcm27xx/patches-5.4/950-0179-clk-clk-bcm2835-Use-zd-when-printing-size_t.patch
@@ -13,7 +13,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
 
 --- a/drivers/clk/bcm/clk-bcm2835.c
 +++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -2335,7 +2335,7 @@ static int bcm2835_clk_probe(struct plat
+@@ -2352,7 +2352,7 @@ static int bcm2835_clk_probe(struct plat
  		return ret;
  
  	/* note that we have registered all the clocks */
diff --git a/target/linux/bcm27xx/patches-5.4/950-0216-clk-bcm2835-Don-t-wait-for-pllh-lock.patch b/target/linux/bcm27xx/patches-5.4/950-0216-clk-bcm2835-Don-t-wait-for-pllh-lock.patch
index d60b6f3d85..77625e8e23 100644
--- a/target/linux/bcm27xx/patches-5.4/950-0216-clk-bcm2835-Don-t-wait-for-pllh-lock.patch
+++ b/target/linux/bcm27xx/patches-5.4/950-0216-clk-bcm2835-Don-t-wait-for-pllh-lock.patch
@@ -10,7 +10,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
 
 --- a/drivers/clk/bcm/clk-bcm2835.c
 +++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -628,15 +628,17 @@ static int bcm2835_pll_on(struct clk_hw
+@@ -643,15 +643,17 @@ static int bcm2835_pll_on(struct clk_hw
  	spin_unlock(&cprman->regs_lock);
  
  	/* Wait for the PLL to lock. */
diff --git a/target/linux/bcm27xx/patches-5.4/950-0219-clk-bcm2835-Add-support-for-setting-leaf-clock-rates.patch b/target/linux/bcm27xx/patches-5.4/950-0219-clk-bcm2835-Add-support-for-setting-leaf-clock-rates.patch
index 056dc69ae7..26b17393d9 100644
--- a/target/linux/bcm27xx/patches-5.4/950-0219-clk-bcm2835-Add-support-for-setting-leaf-clock-rates.patch
+++ b/target/linux/bcm27xx/patches-5.4/950-0219-clk-bcm2835-Add-support-for-setting-leaf-clock-rates.patch
@@ -14,7 +14,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net>
 
 --- a/drivers/clk/bcm/clk-bcm2835.c
 +++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1098,15 +1098,19 @@ static int bcm2835_clock_set_rate(struct
+@@ -1114,15 +1114,19 @@ static int bcm2835_clock_set_rate(struct
  
  	spin_lock(&cprman->regs_lock);
  
@@ -42,7 +42,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net>
  	ctl |= (div & CM_DIV_FRAC_MASK) ? CM_FRAC : 0;
  	cprman_write(cprman, data->ctl_reg, ctl);
  
-@@ -1476,7 +1480,7 @@ static struct clk_hw *bcm2835_register_c
+@@ -1492,7 +1496,7 @@ static struct clk_hw *bcm2835_register_c
  		init.ops = &bcm2835_vpu_clock_clk_ops;
  	} else {
  		init.ops = &bcm2835_clock_clk_ops;
diff --git a/target/linux/bcm27xx/patches-5.4/950-0220-clk-bcm2835-Allow-reparenting-leaf-clocks-while-they.patch b/target/linux/bcm27xx/patches-5.4/950-0220-clk-bcm2835-Allow-reparenting-leaf-clocks-while-they.patch
index 59d030c1eb..22ecf91d63 100644
--- a/target/linux/bcm27xx/patches-5.4/950-0220-clk-bcm2835-Allow-reparenting-leaf-clocks-while-they.patch
+++ b/target/linux/bcm27xx/patches-5.4/950-0220-clk-bcm2835-Allow-reparenting-leaf-clocks-while-they.patch
@@ -15,7 +15,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net>
 
 --- a/drivers/clk/bcm/clk-bcm2835.c
 +++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1087,8 +1087,10 @@ static int bcm2835_clock_on(struct clk_h
+@@ -1103,8 +1103,10 @@ static int bcm2835_clock_on(struct clk_h
  	return 0;
  }
  
@@ -28,7 +28,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net>
  {
  	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
  	struct bcm2835_cprman *cprman = clock->cprman;
-@@ -1110,6 +1112,11 @@ static int bcm2835_clock_set_rate(struct
+@@ -1126,6 +1128,11 @@ static int bcm2835_clock_set_rate(struct
  		bcm2835_clock_wait_busy(clock);
  	}
  
@@ -40,7 +40,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net>
  	ctl &= ~CM_FRAC;
  	ctl |= (div & CM_DIV_FRAC_MASK) ? CM_FRAC : 0;
  	cprman_write(cprman, data->ctl_reg, ctl);
-@@ -1121,6 +1128,12 @@ static int bcm2835_clock_set_rate(struct
+@@ -1137,6 +1144,12 @@ static int bcm2835_clock_set_rate(struct
  	return 0;
  }
  
@@ -53,7 +53,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net>
  static bool
  bcm2835_clk_is_pllc(struct clk_hw *hw)
  {
-@@ -1304,6 +1317,7 @@ static const struct clk_ops bcm2835_cloc
+@@ -1320,6 +1333,7 @@ static const struct clk_ops bcm2835_cloc
  	.unprepare = bcm2835_clock_off,
  	.recalc_rate = bcm2835_clock_get_rate,
  	.set_rate = bcm2835_clock_set_rate,
@@ -61,7 +61,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net>
  	.determine_rate = bcm2835_clock_determine_rate,
  	.set_parent = bcm2835_clock_set_parent,
  	.get_parent = bcm2835_clock_get_parent,
-@@ -1480,7 +1494,6 @@ static struct clk_hw *bcm2835_register_c
+@@ -1496,7 +1510,6 @@ static struct clk_hw *bcm2835_register_c
  		init.ops = &bcm2835_vpu_clock_clk_ops;
  	} else {
  		init.ops = &bcm2835_clock_clk_ops;
diff --git a/target/linux/bcm27xx/patches-5.4/950-0270-clk-bcm2835-Avoid-null-pointer-exception.patch b/target/linux/bcm27xx/patches-5.4/950-0270-clk-bcm2835-Avoid-null-pointer-exception.patch
index d669d4066b..1542f781f0 100644
--- a/target/linux/bcm27xx/patches-5.4/950-0270-clk-bcm2835-Avoid-null-pointer-exception.patch
+++ b/target/linux/bcm27xx/patches-5.4/950-0270-clk-bcm2835-Avoid-null-pointer-exception.patch
@@ -12,7 +12,7 @@ Signed-off-by: popcornmix <popcornmix@gmail.com>
 
 --- a/drivers/clk/bcm/clk-bcm2835.c
 +++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -2262,9 +2262,11 @@ static bool bcm2835_clk_is_claimed(const
+@@ -2278,9 +2278,11 @@ static bool bcm2835_clk_is_claimed(const
  	int i;
  
  	for (i = 0; i < ARRAY_SIZE(clk_desc_array); i++) {
diff --git a/target/linux/bcm27xx/patches-5.4/950-0351-clk-bcm2835-Disable-v3d-clock.patch b/target/linux/bcm27xx/patches-5.4/950-0351-clk-bcm2835-Disable-v3d-clock.patch
index 160b39b9cd..7e55e7d8a6 100644
--- a/target/linux/bcm27xx/patches-5.4/950-0351-clk-bcm2835-Disable-v3d-clock.patch
+++ b/target/linux/bcm27xx/patches-5.4/950-0351-clk-bcm2835-Disable-v3d-clock.patch
@@ -12,7 +12,7 @@ Signed-off-by: popcornmix <popcornmix@gmail.com>
 
 --- a/drivers/clk/bcm/clk-bcm2835.c
 +++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1716,16 +1716,12 @@ static const struct bcm2835_clk_desc clk
+@@ -1732,16 +1732,12 @@ static const struct bcm2835_clk_desc clk
  		.hold_mask = CM_PLLA_HOLDCORE,
  		.fixed_divider = 1,
  		.flags = CLK_SET_RATE_PARENT),
@@ -35,7 +35,7 @@ Signed-off-by: popcornmix <popcornmix@gmail.com>
  	[BCM2835_PLLA_DSI0]	= REGISTER_PLL_DIV(
  		SOC_ALL,
  		.name = "plla_dsi0",
-@@ -2003,14 +1999,12 @@ static const struct bcm2835_clk_desc clk
+@@ -2019,14 +2015,12 @@ static const struct bcm2835_clk_desc clk
  		.int_bits = 6,
  		.frac_bits = 0,
  		.tcnt_mux = 3),
diff --git a/target/linux/bcm27xx/patches-5.4/950-0394-Initialise-rpi-firmware-before-clk-bcm2835.patch b/target/linux/bcm27xx/patches-5.4/950-0394-Initialise-rpi-firmware-before-clk-bcm2835.patch
index 0e0173085d..f993fb4e1a 100644
--- a/target/linux/bcm27xx/patches-5.4/950-0394-Initialise-rpi-firmware-before-clk-bcm2835.patch
+++ b/target/linux/bcm27xx/patches-5.4/950-0394-Initialise-rpi-firmware-before-clk-bcm2835.patch
@@ -25,7 +25,7 @@ Co-authored-by: Phil Elwell <phil@raspberrypi.org>
 
 --- a/drivers/clk/bcm/clk-bcm2835.c
 +++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -2382,7 +2382,7 @@ static int __init __bcm2835_clk_driver_i
+@@ -2399,7 +2399,7 @@ static int __init __bcm2835_clk_driver_i
  {
  	return platform_driver_register(&bcm2835_clk_driver);
  }
diff --git a/target/linux/generic/backport-5.4/041-genirq-affinity-Make-affinity-setting-if-activated-o.patch b/target/linux/generic/backport-5.4/041-genirq-affinity-Make-affinity-setting-if-activated-o.patch
deleted file mode 100644
index cf4f6e1e21..0000000000
--- a/target/linux/generic/backport-5.4/041-genirq-affinity-Make-affinity-setting-if-activated-o.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-From: Thomas Gleixner <tglx@linutronix.de>
-Date: Fri, 24 Jul 2020 22:44:41 +0200
-Subject: [PATCH] genirq/affinity: Make affinity setting if activated opt-in
-
-commit f0c7baca180046824e07fc5f1326e83a8fd150c7 upstream.
-
-John reported that on a RK3288 system the perf per CPU interrupts are all
-affine to CPU0 and provided the analysis:
-
- "It looks like what happens is that because the interrupts are not per-CPU
-  in the hardware, armpmu_request_irq() calls irq_force_affinity() while
-  the interrupt is deactivated and then request_irq() with IRQF_PERCPU |
-  IRQF_NOBALANCING.
-
-  Now when irq_startup() runs with IRQ_STARTUP_NORMAL, it calls
-  irq_setup_affinity() which returns early because IRQF_PERCPU and
-  IRQF_NOBALANCING are set, leaving the interrupt on its original CPU."
-
-This was broken by the recent commit which blocked interrupt affinity
-setting in hardware before activation of the interrupt. While this works in
-general, it does not work for this particular case. As contrary to the
-initial analysis not all interrupt chip drivers implement an activate
-callback, the safe cure is to make the deferred interrupt affinity setting
-at activation time opt-in.
-
-Implement the necessary core logic and make the two irqchip implementations
-for which this is required opt-in. In hindsight this would have been the
-right thing to do, but ...
-
-Fixes: baedb87d1b53 ("genirq/affinity: Handle affinity setting on inactive interrupts correctly")
-Reported-by: John Keeping <john@metanate.com>
-Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-Tested-by: Marc Zyngier <maz@kernel.org>
-Acked-by: Marc Zyngier <maz@kernel.org>
-Cc: stable@vger.kernel.org
-Link: https://lkml.kernel.org/r/87blk4tzgm.fsf@nanos.tec.linutronix.de
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
-
---- a/arch/x86/kernel/apic/vector.c
-+++ b/arch/x86/kernel/apic/vector.c
-@@ -554,6 +554,10 @@ static int x86_vector_alloc_irqs(struct
- 		irqd->chip_data = apicd;
- 		irqd->hwirq = virq + i;
- 		irqd_set_single_target(irqd);
-+
-+		/* Don't invoke affinity setter on deactivated interrupts */
-+		irqd_set_affinity_on_activate(irqd);
-+
- 		/*
- 		 * Legacy vectors are already assigned when the IOAPIC
- 		 * takes them over. They stay on the same vector. This is
---- a/drivers/irqchip/irq-gic-v3-its.c
-+++ b/drivers/irqchip/irq-gic-v3-its.c
-@@ -2581,6 +2581,7 @@ static int its_irq_domain_alloc(struct i
- 	msi_alloc_info_t *info = args;
- 	struct its_device *its_dev = info->scratchpad[0].ptr;
- 	struct its_node *its = its_dev->its;
-+	struct irq_data *irqd;
- 	irq_hw_number_t hwirq;
- 	int err;
- 	int i;
-@@ -2600,7 +2601,9 @@ static int its_irq_domain_alloc(struct i
- 
- 		irq_domain_set_hwirq_and_chip(domain, virq + i,
- 					      hwirq + i, &its_irq_chip, its_dev);
--		irqd_set_single_target(irq_desc_get_irq_data(irq_to_desc(virq + i)));
-+		irqd = irq_get_irq_data(virq + i);
-+		irqd_set_single_target(irqd);
-+		irqd_set_affinity_on_activate(irqd);
- 		pr_debug("ID:%d pID:%d vID:%d\n",
- 			 (int)(hwirq + i - its_dev->event_map.lpi_base),
- 			 (int)(hwirq + i), virq + i);
---- a/include/linux/irq.h
-+++ b/include/linux/irq.h
-@@ -211,6 +211,8 @@ struct irq_data {
-  * IRQD_CAN_RESERVE		- Can use reservation mode
-  * IRQD_MSI_NOMASK_QUIRK	- Non-maskable MSI quirk for affinity change
-  *				  required
-+ * IRQD_AFFINITY_ON_ACTIVATE	- Affinity is set on activation. Don't call
-+ *				  irq_chip::irq_set_affinity() when deactivated.
-  */
- enum {
- 	IRQD_TRIGGER_MASK		= 0xf,
-@@ -234,6 +236,7 @@ enum {
- 	IRQD_DEFAULT_TRIGGER_SET	= (1 << 25),
- 	IRQD_CAN_RESERVE		= (1 << 26),
- 	IRQD_MSI_NOMASK_QUIRK		= (1 << 27),
-+	IRQD_AFFINITY_ON_ACTIVATE	= (1 << 29),
- };
- 
- #define __irqd_to_state(d) ACCESS_PRIVATE((d)->common, state_use_accessors)
-@@ -408,6 +411,16 @@ static inline bool irqd_msi_nomask_quirk
- 	return __irqd_to_state(d) & IRQD_MSI_NOMASK_QUIRK;
- }
- 
-+static inline void irqd_set_affinity_on_activate(struct irq_data *d)
-+{
-+	__irqd_to_state(d) |= IRQD_AFFINITY_ON_ACTIVATE;
-+}
-+
-+static inline bool irqd_affinity_on_activate(struct irq_data *d)
-+{
-+	return __irqd_to_state(d) & IRQD_AFFINITY_ON_ACTIVATE;
-+}
-+
- #undef __irqd_to_state
- 
- static inline irq_hw_number_t irqd_to_hwirq(struct irq_data *d)
---- a/kernel/irq/manage.c
-+++ b/kernel/irq/manage.c
-@@ -281,12 +281,16 @@ static bool irq_set_affinity_deactivated
- 	struct irq_desc *desc = irq_data_to_desc(data);
- 
- 	/*
-+	 * Handle irq chips which can handle affinity only in activated
-+	 * state correctly
-+	 *
- 	 * If the interrupt is not yet activated, just store the affinity
- 	 * mask and do not call the chip driver at all. On activation the
- 	 * driver has to make sure anyway that the interrupt is in a
- 	 * useable state so startup works.
- 	 */
--	if (!IS_ENABLED(CONFIG_IRQ_DOMAIN_HIERARCHY) || irqd_is_activated(data))
-+	if (!IS_ENABLED(CONFIG_IRQ_DOMAIN_HIERARCHY) ||
-+	    irqd_is_activated(data) || !irqd_affinity_on_activate(data))
- 		return false;
- 
- 	cpumask_copy(desc->irq_common_data.affinity, mask);
diff --git a/target/linux/generic/hack-5.4/204-module_strip.patch b/target/linux/generic/hack-5.4/204-module_strip.patch
index a36b6d959f..458736b498 100644
--- a/target/linux/generic/hack-5.4/204-module_strip.patch
+++ b/target/linux/generic/hack-5.4/204-module_strip.patch
@@ -112,7 +112,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  config MODULES_TREE_LOOKUP
 --- a/kernel/module.c
 +++ b/kernel/module.c
-@@ -3110,9 +3110,11 @@ static int setup_load_info(struct load_i
+@@ -3126,9 +3126,11 @@ static int setup_load_info(struct load_i
  
  static int check_modinfo(struct module *mod, struct load_info *info, int flags)
  {
@@ -125,7 +125,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	if (flags & MODULE_INIT_IGNORE_VERMAGIC)
  		modmagic = NULL;
  
-@@ -3133,6 +3135,7 @@ static int check_modinfo(struct module *
+@@ -3149,6 +3151,7 @@ static int check_modinfo(struct module *
  				mod->name);
  		add_taint_module(mod, TAINT_OOT_MODULE, LOCKDEP_STILL_OK);
  	}
diff --git a/target/linux/generic/hack-5.4/902-debloat_proc.patch b/target/linux/generic/hack-5.4/902-debloat_proc.patch
index 7eb6224d4e..8813b38da7 100644
--- a/target/linux/generic/hack-5.4/902-debloat_proc.patch
+++ b/target/linux/generic/hack-5.4/902-debloat_proc.patch
@@ -330,7 +330,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  
 --- a/net/core/sock.c
 +++ b/net/core/sock.c
-@@ -3613,6 +3613,8 @@ static __net_initdata struct pernet_oper
+@@ -3634,6 +3634,8 @@ static __net_initdata struct pernet_oper
  
  static int __init proto_init(void)
  {
diff --git a/target/linux/generic/pending-5.4/690-net-add-support-for-threaded-NAPI-polling.patch b/target/linux/generic/pending-5.4/690-net-add-support-for-threaded-NAPI-polling.patch
index 0fd837d45e..2544645809 100644
--- a/target/linux/generic/pending-5.4/690-net-add-support-for-threaded-NAPI-polling.patch
+++ b/target/linux/generic/pending-5.4/690-net-add-support-for-threaded-NAPI-polling.patch
@@ -226,7 +226,8 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	have = netpoll_poll_lock(n);
  
 -	weight = n->weight;
--
++	work = __napi_poll(n, &do_repoll);
+ 
 -	/* This NAPI_STATE_SCHED test is for avoiding a race
 -	 * with netpoll's poll_napi().  Only the entity which
 -	 * obtains the lock and sees NAPI_STATE_SCHED set will
@@ -243,8 +244,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 -
 -	if (likely(work < weight))
 -		goto out_unlock;
-+	work = __napi_poll(n, &do_repoll);
- 
+-
 -	/* Drivers must not modify the NAPI state if they
 -	 * consume the entire weight.  In such cases this code
 -	 * still "owns" the NAPI instance and therefore can
diff --git a/target/linux/ipq806x/patches-5.4/093-1-v5.8-ipq806x-PCI-qcom-Add-missing-ipq806x-clocks-in-PCIe-driver.patch b/target/linux/ipq806x/patches-5.4/093-1-v5.8-ipq806x-PCI-qcom-Add-missing-ipq806x-clocks-in-PCIe-driver.patch
index 7eb79cae4d..6098cb8fe0 100644
--- a/target/linux/ipq806x/patches-5.4/093-1-v5.8-ipq806x-PCI-qcom-Add-missing-ipq806x-clocks-in-PCIe-driver.patch
+++ b/target/linux/ipq806x/patches-5.4/093-1-v5.8-ipq806x-PCI-qcom-Add-missing-ipq806x-clocks-in-PCIe-driver.patch
@@ -19,7 +19,7 @@ Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
 
 --- a/drivers/pci/controller/dwc/pcie-qcom.c
 +++ b/drivers/pci/controller/dwc/pcie-qcom.c
-@@ -85,6 +85,8 @@ struct qcom_pcie_resources_2_1_0 {
+@@ -103,6 +103,8 @@ struct qcom_pcie_resources_2_1_0 {
  	struct clk *iface_clk;
  	struct clk *core_clk;
  	struct clk *phy_clk;
@@ -28,7 +28,7 @@ Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
  	struct reset_control *pci_reset;
  	struct reset_control *axi_reset;
  	struct reset_control *ahb_reset;
-@@ -235,6 +237,14 @@ static int qcom_pcie_get_resources_2_1_0
+@@ -253,6 +255,14 @@ static int qcom_pcie_get_resources_2_1_0
  	if (IS_ERR(res->phy_clk))
  		return PTR_ERR(res->phy_clk);
  
@@ -43,7 +43,7 @@ Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
  	res->pci_reset = devm_reset_control_get_exclusive(dev, "pci");
  	if (IS_ERR(res->pci_reset))
  		return PTR_ERR(res->pci_reset);
-@@ -267,6 +277,8 @@ static void qcom_pcie_deinit_2_1_0(struc
+@@ -285,6 +295,8 @@ static void qcom_pcie_deinit_2_1_0(struc
  	clk_disable_unprepare(res->iface_clk);
  	clk_disable_unprepare(res->core_clk);
  	clk_disable_unprepare(res->phy_clk);
@@ -52,7 +52,7 @@ Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
  	regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
  }
  
-@@ -296,16 +308,28 @@ static int qcom_pcie_init_2_1_0(struct q
+@@ -315,16 +327,28 @@ static int qcom_pcie_init_2_1_0(struct q
  		goto err_assert_ahb;
  	}
  
@@ -84,7 +84,7 @@ Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
  	}
  
  	ret = reset_control_deassert(res->ahb_reset);
-@@ -361,10 +385,14 @@ static int qcom_pcie_init_2_1_0(struct q
+@@ -400,10 +424,14 @@ static int qcom_pcie_init_2_1_0(struct q
  	return 0;
  
  err_deassert_ahb:
diff --git a/target/linux/ipq806x/patches-5.4/093-2-v5.8-ipq806x-PCI-qcom-Change-duplicate-PCI-reset-to-phy-reset.patch b/target/linux/ipq806x/patches-5.4/093-2-v5.8-ipq806x-PCI-qcom-Change-duplicate-PCI-reset-to-phy-reset.patch
index a2d44a4fb0..9600419710 100644
--- a/target/linux/ipq806x/patches-5.4/093-2-v5.8-ipq806x-PCI-qcom-Change-duplicate-PCI-reset-to-phy-reset.patch
+++ b/target/linux/ipq806x/patches-5.4/093-2-v5.8-ipq806x-PCI-qcom-Change-duplicate-PCI-reset-to-phy-reset.patch
@@ -18,7 +18,7 @@ Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
 
 --- a/drivers/pci/controller/dwc/pcie-qcom.c
 +++ b/drivers/pci/controller/dwc/pcie-qcom.c
-@@ -269,14 +269,14 @@ static void qcom_pcie_deinit_2_1_0(struc
+@@ -287,14 +287,14 @@ static void qcom_pcie_deinit_2_1_0(struc
  {
  	struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
  
@@ -35,7 +35,7 @@ Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
  	clk_disable_unprepare(res->aux_clk);
  	clk_disable_unprepare(res->ref_clk);
  	regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
-@@ -314,12 +314,6 @@ static int qcom_pcie_init_2_1_0(struct q
+@@ -333,12 +333,6 @@ static int qcom_pcie_init_2_1_0(struct q
  		goto err_clk_core;
  	}
  
@@ -48,7 +48,7 @@ Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
  	ret = clk_prepare_enable(res->aux_clk);
  	if (ret) {
  		dev_err(dev, "cannot prepare/enable aux clock\n");
-@@ -372,6 +366,12 @@ static int qcom_pcie_init_2_1_0(struct q
+@@ -411,6 +405,12 @@ static int qcom_pcie_init_2_1_0(struct q
  		return ret;
  	}
  
@@ -61,7 +61,7 @@ Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
  	/* wait for clock acquisition */
  	usleep_range(1000, 1500);
  
-@@ -389,8 +389,6 @@ err_deassert_ahb:
+@@ -428,8 +428,6 @@ err_deassert_ahb:
  err_clk_ref:
  	clk_disable_unprepare(res->aux_clk);
  err_clk_aux:
diff --git a/target/linux/ipq806x/patches-5.4/093-3-v5.8-ipq806x-PCI-qcom-Add-missing-reset-for-ipq806x.patch b/target/linux/ipq806x/patches-5.4/093-3-v5.8-ipq806x-PCI-qcom-Add-missing-reset-for-ipq806x.patch
index e9595dc2a9..fe31e55de3 100644
--- a/target/linux/ipq806x/patches-5.4/093-3-v5.8-ipq806x-PCI-qcom-Add-missing-reset-for-ipq806x.patch
+++ b/target/linux/ipq806x/patches-5.4/093-3-v5.8-ipq806x-PCI-qcom-Add-missing-reset-for-ipq806x.patch
@@ -20,7 +20,7 @@ Cc: stable@vger.kernel.org # v4.5+
 
 --- a/drivers/pci/controller/dwc/pcie-qcom.c
 +++ b/drivers/pci/controller/dwc/pcie-qcom.c
-@@ -92,6 +92,7 @@ struct qcom_pcie_resources_2_1_0 {
+@@ -110,6 +110,7 @@ struct qcom_pcie_resources_2_1_0 {
  	struct reset_control *ahb_reset;
  	struct reset_control *por_reset;
  	struct reset_control *phy_reset;
@@ -28,7 +28,7 @@ Cc: stable@vger.kernel.org # v4.5+
  	struct regulator_bulk_data supplies[QCOM_PCIE_2_1_0_MAX_SUPPLY];
  };
  
-@@ -261,6 +262,10 @@ static int qcom_pcie_get_resources_2_1_0
+@@ -279,6 +280,10 @@ static int qcom_pcie_get_resources_2_1_0
  	if (IS_ERR(res->por_reset))
  		return PTR_ERR(res->por_reset);
  
@@ -39,7 +39,7 @@ Cc: stable@vger.kernel.org # v4.5+
  	res->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
  	return PTR_ERR_OR_ZERO(res->phy_reset);
  }
-@@ -274,6 +279,7 @@ static void qcom_pcie_deinit_2_1_0(struc
+@@ -292,6 +297,7 @@ static void qcom_pcie_deinit_2_1_0(struc
  	reset_control_assert(res->axi_reset);
  	reset_control_assert(res->ahb_reset);
  	reset_control_assert(res->por_reset);
@@ -47,7 +47,7 @@ Cc: stable@vger.kernel.org # v4.5+
  	reset_control_assert(res->phy_reset);
  	clk_disable_unprepare(res->iface_clk);
  	clk_disable_unprepare(res->core_clk);
-@@ -332,6 +338,12 @@ static int qcom_pcie_init_2_1_0(struct q
+@@ -351,6 +357,12 @@ static int qcom_pcie_init_2_1_0(struct q
  		goto err_deassert_ahb;
  	}
  
diff --git a/target/linux/ipq806x/patches-5.4/093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch b/target/linux/ipq806x/patches-5.4/093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch
index 4d2da5f768..32fc297fe0 100644
--- a/target/linux/ipq806x/patches-5.4/093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch
+++ b/target/linux/ipq806x/patches-5.4/093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch
@@ -17,7 +17,7 @@ Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
 
 --- a/drivers/pci/controller/dwc/pcie-qcom.c
 +++ b/drivers/pci/controller/dwc/pcie-qcom.c
-@@ -81,12 +81,9 @@
+@@ -99,12 +99,9 @@
  #define SLV_ADDR_SPACE_SZ			0x10000000
  
  #define QCOM_PCIE_2_1_0_MAX_SUPPLY	3
@@ -32,7 +32,7 @@ Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
  	struct reset_control *pci_reset;
  	struct reset_control *axi_reset;
  	struct reset_control *ahb_reset;
-@@ -226,25 +223,21 @@ static int qcom_pcie_get_resources_2_1_0
+@@ -244,25 +241,21 @@ static int qcom_pcie_get_resources_2_1_0
  	if (ret)
  		return ret;
  
@@ -73,7 +73,7 @@ Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
  
  	res->pci_reset = devm_reset_control_get_exclusive(dev, "pci");
  	if (IS_ERR(res->pci_reset))
-@@ -274,17 +267,13 @@ static void qcom_pcie_deinit_2_1_0(struc
+@@ -292,17 +285,13 @@ static void qcom_pcie_deinit_2_1_0(struc
  {
  	struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
  
@@ -92,111 +92,113 @@ Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
  	regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
  }
  
-@@ -302,36 +291,6 @@ static int qcom_pcie_init_2_1_0(struct q
+@@ -321,47 +310,45 @@ static int qcom_pcie_init_2_1_0(struct q
  		return ret;
  	}
  
 -	ret = reset_control_assert(res->ahb_reset);
--	if (ret) {
++	ret = reset_control_deassert(res->ahb_reset);
+ 	if (ret) {
 -		dev_err(dev, "cannot assert ahb reset\n");
 -		goto err_assert_ahb;
--	}
--
++		dev_err(dev, "cannot deassert ahb reset\n");
++		goto err_deassert_ahb;
+ 	}
+ 
 -	ret = clk_prepare_enable(res->iface_clk);
--	if (ret) {
++	ret = reset_control_deassert(res->ext_reset);
+ 	if (ret) {
 -		dev_err(dev, "cannot prepare/enable iface clock\n");
 -		goto err_assert_ahb;
--	}
--
--	ret = clk_prepare_enable(res->core_clk);
--	if (ret) {
--		dev_err(dev, "cannot prepare/enable core clock\n");
--		goto err_clk_core;
--	}
--
--	ret = clk_prepare_enable(res->aux_clk);
--	if (ret) {
--		dev_err(dev, "cannot prepare/enable aux clock\n");
--		goto err_clk_aux;
--	}
--
--	ret = clk_prepare_enable(res->ref_clk);
--	if (ret) {
--		dev_err(dev, "cannot prepare/enable ref clock\n");
--		goto err_clk_ref;
--	}
--
- 	ret = reset_control_deassert(res->ahb_reset);
- 	if (ret) {
- 		dev_err(dev, "cannot deassert ahb reset\n");
-@@ -341,48 +300,46 @@ static int qcom_pcie_init_2_1_0(struct q
- 	ret = reset_control_deassert(res->ext_reset);
- 	if (ret) {
- 		dev_err(dev, "cannot deassert ext reset\n");
--		goto err_deassert_ahb;
++		dev_err(dev, "cannot deassert ext reset\n");
 +		goto err_deassert_ext;
  	}
  
--	/* enable PCIe clocks and resets */
--	val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
--	val &= ~BIT(0);
--	writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
--
--	/* enable external reference clock */
--	val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
--	val |= BIT(16);
--	writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
--
- 	ret = reset_control_deassert(res->phy_reset);
+-	ret = clk_prepare_enable(res->core_clk);
++	ret = reset_control_deassert(res->phy_reset);
  	if (ret) {
- 		dev_err(dev, "cannot deassert phy reset\n");
--		return ret;
+-		dev_err(dev, "cannot prepare/enable core clock\n");
+-		goto err_clk_core;
++		dev_err(dev, "cannot deassert phy reset\n");
 +		goto err_deassert_phy;
  	}
  
- 	ret = reset_control_deassert(res->pci_reset);
+-	ret = clk_prepare_enable(res->aux_clk);
++	ret = reset_control_deassert(res->pci_reset);
  	if (ret) {
- 		dev_err(dev, "cannot deassert pci reset\n");
--		return ret;
+-		dev_err(dev, "cannot prepare/enable aux clock\n");
+-		goto err_clk_aux;
++		dev_err(dev, "cannot deassert pci reset\n");
 +		goto err_deassert_pci;
  	}
  
- 	ret = reset_control_deassert(res->por_reset);
+-	ret = clk_prepare_enable(res->ref_clk);
++	ret = reset_control_deassert(res->por_reset);
  	if (ret) {
- 		dev_err(dev, "cannot deassert por reset\n");
--		return ret;
+-		dev_err(dev, "cannot prepare/enable ref clock\n");
+-		goto err_clk_ref;
++		dev_err(dev, "cannot deassert por reset\n");
 +		goto err_deassert_por;
  	}
  
- 	ret = reset_control_deassert(res->axi_reset);
+-	ret = reset_control_deassert(res->ahb_reset);
++	ret = reset_control_deassert(res->axi_reset);
  	if (ret) {
- 		dev_err(dev, "cannot deassert axi reset\n");
--		return ret;
+-		dev_err(dev, "cannot deassert ahb reset\n");
+-		goto err_deassert_ahb;
++		dev_err(dev, "cannot deassert axi reset\n");
 +		goto err_deassert_axi;
  	}
  
--	ret = clk_prepare_enable(res->phy_clk);
+-	ret = reset_control_deassert(res->ext_reset);
 -	if (ret) {
--		dev_err(dev, "cannot prepare/enable phy clock\n");
+-		dev_err(dev, "cannot deassert ext reset\n");
 -		goto err_deassert_ahb;
 -	}
 +	ret = clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks);
 +	if (ret)
 +		goto err_clks;
-+
-+	/* enable PCIe clocks and resets */
-+	val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
-+	val &= ~BIT(0);
-+	writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
-+
-+	/* enable external reference clock */
-+	val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
-+	val |= BIT(16);
-+	writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
  
+ 	/* enable PCIe clocks and resets */
+ 	val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
+@@ -393,36 +380,6 @@ static int qcom_pcie_init_2_1_0(struct q
+ 	val |= PHY_REFCLK_SSP_EN;
+ 	writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
+ 
+-	ret = reset_control_deassert(res->phy_reset);
+-	if (ret) {
+-		dev_err(dev, "cannot deassert phy reset\n");
+-		return ret;
+-	}
+-
+-	ret = reset_control_deassert(res->pci_reset);
+-	if (ret) {
+-		dev_err(dev, "cannot deassert pci reset\n");
+-		return ret;
+-	}
+-
+-	ret = reset_control_deassert(res->por_reset);
+-	if (ret) {
+-		dev_err(dev, "cannot deassert por reset\n");
+-		return ret;
+-	}
+-
+-	ret = reset_control_deassert(res->axi_reset);
+-	if (ret) {
+-		dev_err(dev, "cannot deassert axi reset\n");
+-		return ret;
+-	}
+-
+-	ret = clk_prepare_enable(res->phy_clk);
+-	if (ret) {
+-		dev_err(dev, "cannot prepare/enable phy clock\n");
+-		goto err_deassert_ahb;
+-	}
+-
  	/* wait for clock acquisition */
  	usleep_range(1000, 1500);
-@@ -396,15 +353,19 @@ static int qcom_pcie_init_2_1_0(struct q
+ 
+@@ -435,15 +392,19 @@ static int qcom_pcie_init_2_1_0(struct q
  
  	return 0;
  
diff --git a/target/linux/ipq806x/patches-5.4/093-5-v5.8-ipq806x-PCI-qcom-Define-some-PARF-params-needed-for-ipq8064-SoC.patch b/target/linux/ipq806x/patches-5.4/093-5-v5.8-ipq806x-PCI-qcom-Define-some-PARF-params-needed-for-ipq8064-SoC.patch
deleted file mode 100644
index ff3f34cbf8..0000000000
--- a/target/linux/ipq806x/patches-5.4/093-5-v5.8-ipq806x-PCI-qcom-Define-some-PARF-params-needed-for-ipq8064-SoC.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From 5149901e9e6deca487c01cc434a3ac4125c7b00b Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Mon, 15 Jun 2020 23:06:03 +0200
-Subject: PCI: qcom: Define some PARF params needed for ipq8064 SoC
-
-Set some specific value for Tx De-Emphasis, Tx Swing and Rx equalization
-needed on some ipq8064 based device (Netgear R7800 for example). Without
-this the system locks on kernel load.
-
-Link: https://lore.kernel.org/r/20200615210608.21469-8-ansuelsmth@gmail.com
-Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
-Cc: stable@vger.kernel.org # v4.5+
----
- drivers/pci/controller/dwc/pcie-qcom.c | 24 ++++++++++++++++++++++++
- 1 file changed, 24 insertions(+)
-
---- a/drivers/pci/controller/dwc/pcie-qcom.c
-+++ b/drivers/pci/controller/dwc/pcie-qcom.c
-@@ -76,6 +76,18 @@
- #define DBI_RO_WR_EN				1
- 
- #define PERST_DELAY_US				1000
-+/* PARF registers */
-+#define PCIE20_PARF_PCS_DEEMPH			0x34
-+#define PCS_DEEMPH_TX_DEEMPH_GEN1(x)		((x) << 16)
-+#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x)	((x) << 8)
-+#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x)	((x) << 0)
-+
-+#define PCIE20_PARF_PCS_SWING			0x38
-+#define PCS_SWING_TX_SWING_FULL(x)		((x) << 8)
-+#define PCS_SWING_TX_SWING_LOW(x)		((x) << 0)
-+
-+#define PCIE20_PARF_CONFIG_BITS		0x50
-+#define PHY_RX0_EQ(x)				((x) << 24)
- 
- #define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE	0x358
- #define SLV_ADDR_SPACE_SZ			0x10000000
-@@ -282,6 +294,7 @@ static int qcom_pcie_init_2_1_0(struct q
- 	struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
- 	struct dw_pcie *pci = pcie->pci;
- 	struct device *dev = pci->dev;
-+	struct device_node *node = dev->of_node;
- 	u32 val;
- 	int ret;
- 
-@@ -336,6 +349,17 @@ static int qcom_pcie_init_2_1_0(struct q
- 	val &= ~BIT(0);
- 	writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
- 
-+	if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) {
-+		writel(PCS_DEEMPH_TX_DEEMPH_GEN1(24) |
-+			       PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(24) |
-+			       PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(34),
-+		       pcie->parf + PCIE20_PARF_PCS_DEEMPH);
-+		writel(PCS_SWING_TX_SWING_FULL(120) |
-+			       PCS_SWING_TX_SWING_LOW(120),
-+		       pcie->parf + PCIE20_PARF_PCS_SWING);
-+		writel(PHY_RX0_EQ(4), pcie->parf + PCIE20_PARF_CONFIG_BITS);
-+	}
-+
- 	/* enable external reference clock */
- 	val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
- 	val |= BIT(16);
diff --git a/target/linux/ipq806x/patches-5.4/093-6-v5.8-ipq806x-PCI-qcom-Add-support-for-tx-term-offset-for-rev-2_1_0.patch b/target/linux/ipq806x/patches-5.4/093-6-v5.8-ipq806x-PCI-qcom-Add-support-for-tx-term-offset-for-rev-2_1_0.patch
deleted file mode 100644
index 911c18e69d..0000000000
--- a/target/linux/ipq806x/patches-5.4/093-6-v5.8-ipq806x-PCI-qcom-Add-support-for-tx-term-offset-for-rev-2_1_0.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From de3c4bf648975ea0b1d344d811e9b0748907b47c Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Mon, 15 Jun 2020 23:06:04 +0200
-Subject: PCI: qcom: Add support for tx term offset for rev 2.1.0
-
-Add tx term offset support to pcie qcom driver need in some revision of
-the ipq806x SoC. Ipq8064 needs tx term offset set to 7.
-
-Link: https://lore.kernel.org/r/20200615210608.21469-9-ansuelsmth@gmail.com
-Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
-Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
-Cc: stable@vger.kernel.org # v4.5+
----
- drivers/pci/controller/dwc/pcie-qcom.c | 17 ++++++++++++++++-
- 1 file changed, 16 insertions(+), 1 deletion(-)
-
---- a/drivers/pci/controller/dwc/pcie-qcom.c
-+++ b/drivers/pci/controller/dwc/pcie-qcom.c
-@@ -45,7 +45,13 @@
- #define PCIE_CAP_CPL_TIMEOUT_DISABLE		0x10
- 
- #define PCIE20_PARF_PHY_CTRL			0x40
-+#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK	GENMASK(20, 16)
-+#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x)		((x) << 16)
-+
- #define PCIE20_PARF_PHY_REFCLK			0x4C
-+#define PHY_REFCLK_SSP_EN			BIT(16)
-+#define PHY_REFCLK_USE_PAD			BIT(12)
-+
- #define PCIE20_PARF_DBI_BASE_ADDR		0x168
- #define PCIE20_PARF_SLV_ADDR_SPACE_SIZE		0x16C
- #define PCIE20_PARF_MHI_CLOCK_RESET_CTRL	0x174
-@@ -360,9 +366,18 @@ static int qcom_pcie_init_2_1_0(struct q
- 		writel(PHY_RX0_EQ(4), pcie->parf + PCIE20_PARF_CONFIG_BITS);
- 	}
- 
-+	if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) {
-+		/* set TX termination offset */
-+		val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
-+		val &= ~PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK;
-+		val |= PHY_CTRL_PHY_TX0_TERM_OFFSET(7);
-+		writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
-+	}
-+
- 	/* enable external reference clock */
- 	val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
--	val |= BIT(16);
-+	val &= ~PHY_REFCLK_USE_PAD;
-+	val |= PHY_REFCLK_SSP_EN;
- 	writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
- 
- 	/* wait for clock acquisition */
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch b/target/linux/layerscape/patches-5.4/804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch
index 23839a36cd..f062276254 100644
--- a/target/linux/layerscape/patches-5.4/804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch
+++ b/target/linux/layerscape/patches-5.4/804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch
@@ -30,7 +30,7 @@ Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
 
 --- a/drivers/crypto/caam/caamalg.c
 +++ b/drivers/crypto/caam/caamalg.c
-@@ -3542,13 +3542,14 @@ int caam_algapi_init(struct device *ctrl
+@@ -3520,13 +3520,14 @@ int caam_algapi_init(struct device *ctrl
  	 * First, detect presence and attributes of DES, AES, and MD blocks.
  	 */
  	if (priv->era < 10) {
@@ -47,7 +47,7 @@ Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
  		des_inst = (cha_inst & CHA_ID_LS_DES_MASK) >>
  			   CHA_ID_LS_DES_SHIFT;
  		aes_inst = cha_inst & CHA_ID_LS_AES_MASK;
-@@ -3558,24 +3559,24 @@ int caam_algapi_init(struct device *ctrl
+@@ -3534,23 +3535,23 @@ int caam_algapi_init(struct device *ctrl
  		ccha_inst = 0;
  		ptha_inst = 0;
  
@@ -73,10 +73,8 @@ Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
  		md_inst = mdha & CHA_VER_NUM_MASK;
 -		ccha_inst = rd_reg32(&priv->ctrl->vreg.ccha) & CHA_VER_NUM_MASK;
 -		ptha_inst = rd_reg32(&priv->ctrl->vreg.ptha) & CHA_VER_NUM_MASK;
--		arc4_inst = rd_reg32(&priv->ctrl->vreg.afha) & CHA_VER_NUM_MASK;
 +		ccha_inst = rd_reg32(&vreg->ccha) & CHA_VER_NUM_MASK;
 +		ptha_inst = rd_reg32(&vreg->ptha) & CHA_VER_NUM_MASK;
-+		arc4_inst = rd_reg32(&vreg->afha) & CHA_VER_NUM_MASK;
  
  		gcm_support = aesa & CHA_VER_MISC_AES_GCM;
  	}
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0022-MLK-19801-2-crypto-caam-add-support-of-tagged-keys-i.patch b/target/linux/layerscape/patches-5.4/804-crypto-0022-MLK-19801-2-crypto-caam-add-support-of-tagged-keys-i.patch
index cf982f8a58..81f2010aba 100644
--- a/target/linux/layerscape/patches-5.4/804-crypto-0022-MLK-19801-2-crypto-caam-add-support-of-tagged-keys-i.patch
+++ b/target/linux/layerscape/patches-5.4/804-crypto-0022-MLK-19801-2-crypto-caam-add-support-of-tagged-keys-i.patch
@@ -127,8 +127,8 @@ Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
  	/* skcipher_encrypt shared descriptor */
  	desc = ctx->sh_desc_enc;
  	cnstr_shdsc_skcipher_encap(desc, &ctx->cdata, ivsize, is_rfc3686,
-@@ -824,6 +867,14 @@ static int arc4_skcipher_setkey(struct c
- 	return skcipher_setkey(skcipher, key, keylen, 0);
+@@ -818,6 +861,14 @@ static int ctr_skcipher_setkey(struct cr
+ 	return skcipher_setkey(skcipher, key, keylen, ctx1_iv_off);
  }
  
 +#ifdef CONFIG_CRYPTO_DEV_FSL_CAAM_TK_API
@@ -142,7 +142,7 @@ Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
  static int des_skcipher_setkey(struct crypto_skcipher *skcipher,
  			       const u8 *key, unsigned int keylen)
  {
-@@ -1924,6 +1975,25 @@ static struct caam_skcipher_alg driver_a
+@@ -1918,6 +1969,25 @@ static struct caam_skcipher_alg driver_a
  		},
  		.caam.class1_alg_type = OP_ALG_ALGSEL_AES | OP_ALG_AAI_CBC,
  	},
@@ -168,7 +168,7 @@ Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
  	{
  		.skcipher = {
  			.base = {
-@@ -2043,6 +2113,24 @@ static struct caam_skcipher_alg driver_a
+@@ -2037,6 +2107,24 @@ static struct caam_skcipher_alg driver_a
  		},
  		.caam.class1_alg_type = OP_ALG_ALGSEL_AES | OP_ALG_AAI_ECB,
  	},
@@ -193,7 +193,7 @@ Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
  	{
  		.skcipher = {
  			.base = {
-@@ -3507,7 +3595,8 @@ static void caam_skcipher_alg_init(struc
+@@ -3486,7 +3574,8 @@ static void caam_skcipher_alg_init(struc
  	struct skcipher_alg *alg = &t_alg->skcipher;
  
  	alg->base.cra_module = THIS_MODULE;
diff --git a/target/linux/mvebu/patches-5.4/522-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch b/target/linux/mvebu/patches-5.4/522-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch
index 1a608f2b6a..7b112eb8ad 100644
--- a/target/linux/mvebu/patches-5.4/522-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch
+++ b/target/linux/mvebu/patches-5.4/522-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch
@@ -15,7 +15,7 @@ Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
 
 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
 +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -137,7 +137,7 @@
+@@ -143,7 +143,7 @@
  
  		dsa,member = <0 0>;
  
diff --git a/target/linux/mvebu/patches-5.4/523-arm64-dts-marvell-espressobin-remove-COMPHY-nodes-as.patch b/target/linux/mvebu/patches-5.4/523-arm64-dts-marvell-espressobin-remove-COMPHY-nodes-as.patch
index 75c4688c75..dd7a9b2cd1 100644
--- a/target/linux/mvebu/patches-5.4/523-arm64-dts-marvell-espressobin-remove-COMPHY-nodes-as.patch
+++ b/target/linux/mvebu/patches-5.4/523-arm64-dts-marvell-espressobin-remove-COMPHY-nodes-as.patch
@@ -24,7 +24,7 @@ Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
 
 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
 +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -54,8 +54,6 @@
+@@ -60,8 +60,6 @@
  /* J6 */
  &sata {
  	status = "okay";
@@ -33,7 +33,7 @@ Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
  };
  
  /* J1 */
-@@ -121,11 +119,17 @@
+@@ -127,11 +125,17 @@
  /* J7 */
  &usb3 {
  	status = "okay";
diff --git a/target/linux/octeontx/patches-5.4/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch b/target/linux/octeontx/patches-5.4/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch
index 200baec643..833604ae55 100644
--- a/target/linux/octeontx/patches-5.4/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch
+++ b/target/linux/octeontx/patches-5.4/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch
@@ -22,7 +22,7 @@ Signed-off-by: Tim Harvey <tharvey@gateworks.com>
  #include <linux/platform_data/x86/apple.h>
  #include <linux/pm_runtime.h>
  #include <linux/switchtec.h>
-@@ -5619,3 +5620,34 @@ static void apex_pci_fixup_class(struct
+@@ -5622,3 +5623,34 @@ static void apex_pci_fixup_class(struct
  }
  DECLARE_PCI_FIXUP_CLASS_HEADER(0x1ac1, 0x089a,
  			       PCI_CLASS_NOT_DEFINED, 8, apex_pci_fixup_class);