aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorFelix Fietkau <nbd@nbd.name>2017-02-06 11:46:48 +0100
committerFelix Fietkau <nbd@nbd.name>2017-02-16 17:17:15 +0100
commit2bf9ea6a31736db059aa97addce3a34b933dacc1 (patch)
treeecfe628aabaf38e6bd40ca841443d19079105a83 /target/linux
parent237454991618e0e8b7ceb8a8a2a43fca12c1a454 (diff)
downloadupstream-2bf9ea6a31736db059aa97addce3a34b933dacc1.tar.gz
upstream-2bf9ea6a31736db059aa97addce3a34b933dacc1.tar.bz2
upstream-2bf9ea6a31736db059aa97addce3a34b933dacc1.zip
mvebu: add linux 4.9 support
Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/mvebu/Makefile2
-rw-r--r--target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac20
-rw-r--r--target/linux/mvebu/config-4.9454
-rw-r--r--target/linux/mvebu/patches-4.9/002-add_powertables.patch748
-rw-r--r--target/linux/mvebu/patches-4.9/003-add_switch_nodes.patch40
-rw-r--r--target/linux/mvebu/patches-4.9/010-build_new_dtbs.patch11
-rw-r--r--target/linux/mvebu/patches-4.9/100-find_active_root.patch60
-rw-r--r--target/linux/mvebu/patches-4.9/102-revert_i2c_delay.patch15
-rw-r--r--target/linux/mvebu/patches-4.9/103-remove-nand-driver-bug.patch13
-rw-r--r--target/linux/mvebu/patches-4.9/104-linksys_mamba_disable_keep_config.patch10
-rw-r--r--target/linux/mvebu/patches-4.9/106-enable-bm-on-linksys-devices.patch107
-rw-r--r--target/linux/mvebu/patches-4.9/110-pxa3xxx_revert_irq_thread.patch69
-rw-r--r--target/linux/mvebu/patches-4.9/120-net-mvneta-add-BQL-support.patch83
-rw-r--r--target/linux/mvebu/patches-4.9/200-gpio_mvebu_add_limited_pwm_support.patch433
-rw-r--r--target/linux/mvebu/patches-4.9/201-dt_bindings_extend_mvebu_gpio_documentation_with_pwm.patch52
-rw-r--r--target/linux/mvebu/patches-4.9/202-mvebu_xp_add_pwm_properties_to_dtsi_files.patch149
-rw-r--r--target/linux/mvebu/patches-4.9/203-arm_mvebu_enable_pwm_in_defconfig.patch18
-rw-r--r--target/linux/mvebu/patches-4.9/204-mvebu_wrt1900ac_use_pwm-fan_rather_than_gpio-fan.patch28
-rw-r--r--target/linux/mvebu/patches-4.9/205-armada-385-rd-mtd-partitions.patch19
-rw-r--r--target/linux/mvebu/patches-4.9/206-ARM-mvebu-385-ap-Add-partitions.patch35
-rw-r--r--target/linux/mvebu/patches-4.9/210-clearfog_switch_node.patch21
-rw-r--r--target/linux/mvebu/patches-4.9/220-ARM-dts-armada388-clearfog-add-SFP-module-support.patch84
-rw-r--r--target/linux/mvebu/patches-4.9/300-mvneta-tx-queue-workaround.patch36
-rw-r--r--target/linux/mvebu/patches-4.9/400-phy-provide-a-hook-for-link-up-link-down-events.patch177
-rw-r--r--target/linux/mvebu/patches-4.9/401-net-phy-move-phy-MMD-accessors-to-phy-core.c.patch292
-rw-r--r--target/linux/mvebu/patches-4.9/402-net-phy-make-phy_-read-write-_mmd-generic-MMD-access.patch97
-rw-r--r--target/linux/mvebu/patches-4.9/403-net-phy-avoid-setting-unsupported-EEE-advertisments.patch52
-rw-r--r--target/linux/mvebu/patches-4.9/404-net-phy-restart-phy-autonegotiation-after-EEE-advert.patch50
-rw-r--r--target/linux/mvebu/patches-4.9/405-net-phy-allow-EEE-with-SGMII-interface-modes.patch21
-rw-r--r--target/linux/mvebu/patches-4.9/406-net-phy-improve-phylib-correctness-for-non-autoneg-s.patch199
-rw-r--r--target/linux/mvebu/patches-4.9/407-net-phy-add-802.3-clause-45-support-to-phylib.patch323
-rw-r--r--target/linux/mvebu/patches-4.9/408-net-phy-hook-up-clause-45-autonegotiation-restart.patch54
-rw-r--r--target/linux/mvebu/patches-4.9/409-net-phy-don-t-double-read-clause-45-status-register.patch35
-rw-r--r--target/linux/mvebu/patches-4.9/410-net-phy-allow-settings-table-to-support-more-than-32.patch142
-rw-r--r--target/linux/mvebu/patches-4.9/411-net-phy-split-out-PHY-speed-and-duplex-string-genera.patch103
-rw-r--r--target/linux/mvebu/patches-4.9/412-net-phy-move-phy_lookup_setting-and-guts-of-phy_supp.patch329
-rw-r--r--target/linux/mvebu/patches-4.9/413-phy-export-phy_start_machine-for-phylink.patch22
-rw-r--r--target/linux/mvebu/patches-4.9/414-phy-add-I2C-mdio-bus.patch180
-rw-r--r--target/linux/mvebu/patches-4.9/415-phylink-add-phylink-infrastructure.patch1120
-rw-r--r--target/linux/mvebu/patches-4.9/416-phylink-add-hooks-for-SFP-support.patch177
-rw-r--r--target/linux/mvebu/patches-4.9/417-sfp-add-phylink-based-SFP-module-support.patch1477
-rw-r--r--target/linux/mvebu/patches-4.9/418-sfp-display-SFP-module-information.patch280
-rw-r--r--target/linux/mvebu/patches-4.9/419-net-mvneta-convert-to-phylink.patch743
-rw-r--r--target/linux/mvebu/patches-4.9/420-net-mvneta-disable-MVNETA_CAUSE_PSC_SYNC_CHANGE-inte.patch58
-rw-r--r--target/linux/mvebu/patches-4.9/421-phylink-add-ethtool-nway_reset-support.patch44
-rw-r--r--target/linux/mvebu/patches-4.9/422-net-mvneta-add-nway_reset-support.patch35
-rw-r--r--target/linux/mvebu/patches-4.9/423-phylink-add-flow-control-support.patch232
-rw-r--r--target/linux/mvebu/patches-4.9/424-net-mvneta-add-flow-control-support-via-phylink.patch76
-rw-r--r--target/linux/mvebu/patches-4.9/425-net-mvneta-enable-flow-control-for-PHY-connections.patch28
-rw-r--r--target/linux/mvebu/patches-4.9/426-net-mvneta-enable-flow-control-for-fixed-connections.patch32
-rw-r--r--target/linux/mvebu/patches-4.9/427-phylink-add-EEE-support.patch116
-rw-r--r--target/linux/mvebu/patches-4.9/428-net-mvneta-add-EEE-support.patch179
-rw-r--r--target/linux/mvebu/patches-4.9/429-phylink-add-module-EEPROM-support.patch123
-rw-r--r--target/linux/mvebu/patches-4.9/430-net-mvneta-add-module-EEPROM-reading-support.patch41
-rw-r--r--target/linux/mvebu/patches-4.9/431-sfp-phylink-hook-up-eeprom-functions.patch65
-rw-r--r--target/linux/mvebu/patches-4.9/432-phy-marvell-88E1512-add-flow-control-support.patch24
-rw-r--r--target/linux/mvebu/patches-4.9/433-phy-marvell-88E1111-add-flow-control-support.patch22
-rw-r--r--target/linux/mvebu/patches-4.9/434-phy-marvell-88E1540-add-flow-control-support.patch22
-rw-r--r--target/linux/mvebu/patches-4.9/435-net-phy-fix-marvell-phy-status-reading.patch26
-rw-r--r--target/linux/mvebu/patches-4.9/436-phylink-propagate-PHY-interface-mode-to-MAC-driver.patch126
-rw-r--r--target/linux/mvebu/patches-4.9/437-phylink-ensure-link-drops-are-reported.patch52
-rw-r--r--target/linux/mvebu/patches-4.9/450-reprobe_sfp_phy.patch119
62 files changed, 9799 insertions, 1 deletions
diff --git a/target/linux/mvebu/Makefile b/target/linux/mvebu/Makefile
index e319a8f822..a07aa7cf2d 100644
--- a/target/linux/mvebu/Makefile
+++ b/target/linux/mvebu/Makefile
@@ -14,7 +14,7 @@ CPU_TYPE:=cortex-a9
CPU_SUBTYPE:=vfpv3
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
-KERNEL_PATCHVER:=4.4
+KERNEL_PATCHVER:=4.9
include $(INCLUDE_DIR)/target.mk
diff --git a/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac b/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
index 3e870e8b84..ae34ef49da 100644
--- a/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
@@ -16,11 +16,31 @@ preinit_set_mac_address() {
ifconfig eth1 hw ether $mac 2>/dev/null
;;
armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby)
+ # rename interfaces back to the way they were with 4.4
+ case "$(readlink /sys/class/net/eth0)" in
+ *f1070000*)
+ ip link set eth0 name tmp0
+ ip link set eth1 name eth0
+ ip link set tmp0 name eth1
+ ;;
+ esac
+
mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
mac_wan=$(macaddr_setbit_la "$mac")
ifconfig eth1 hw ether $mac 2>/dev/null
ifconfig eth0 hw ether $mac_wan 2>/dev/null
;;
+ armada-385-db-ap|armada-388-clearfog)
+ # rename interfaces back to the way they were with 4.4
+ case "$(readlink /sys/class/net/eth0)" in
+ *f1070000*)
+ ip link set eth0 name tmp0
+ ip link set eth1 name eth0
+ ip link set eth2 name eth1
+ ip link set tmp0 name eth2
+ ;;
+ esac
+ ;;
esac
}
diff --git a/target/linux/mvebu/config-4.9 b/target/linux/mvebu/config-4.9
new file mode 100644
index 0000000000..6b0369d6ae
--- /dev/null
+++ b/target/linux/mvebu/config-4.9
@@ -0,0 +1,454 @@
+CONFIG_AHCI_MVEBU=y
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+CONFIG_ARCH_HAS_SG_CHAIN=y
+CONFIG_ARCH_HAS_TICK_BROADCAST=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MULTIPLATFORM=y
+# CONFIG_ARCH_MULTI_CPU_AUTO is not set
+CONFIG_ARCH_MULTI_V6_V7=y
+CONFIG_ARCH_MULTI_V7=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_ARCH_NR_GPIO=0
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARM=y
+CONFIG_ARMADA_370_CLK=y
+CONFIG_ARMADA_370_XP_IRQ=y
+CONFIG_ARMADA_370_XP_TIMER=y
+CONFIG_ARMADA_38X_CLK=y
+CONFIG_ARMADA_THERMAL=y
+CONFIG_ARMADA_XP_CLK=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
+CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_ARM_CPU_SUSPEND=y
+CONFIG_ARM_CRYPTO=y
+CONFIG_ARM_ERRATA_720789=y
+CONFIG_ARM_GIC=y
+CONFIG_ARM_HAS_SG_CHAIN=y
+CONFIG_ARM_HEAVY_MB=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+# CONFIG_ARM_LPAE is not set
+CONFIG_ARM_MVEBU_V7_CPUIDLE=y
+CONFIG_ARM_PATCH_IDIV=y
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_ARM_VIRT_EXT=y
+CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
+CONFIG_ATA=y
+CONFIG_ATAGS=y
+CONFIG_AUTO_ZRELADDR=y
+# CONFIG_BINFMT_FLAT is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BOUNCE=y
+# CONFIG_CACHE_FEROCEON_L2 is not set
+CONFIG_CACHE_L2X0=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLKSRC_OF=y
+CONFIG_CLKSRC_PROBE=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_COMMON_CLK=y
+CONFIG_CPUFREQ_DT=y
+CONFIG_CPUFREQ_DT_PLATDEV=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_GOV_ATTR_SET=y
+CONFIG_CPU_FREQ_GOV_COMMON=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_HAS_ASID=y
+# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_PJ4B=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_RMAP=y
+CONFIG_CPU_THERMAL=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_V7=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_ABLK_HELPER=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_AES_ARM=y
+CONFIG_CRYPTO_AES_ARM_BS=y
+# CONFIG_CRYPTO_AES_ARM_CE is not set
+CONFIG_CRYPTO_CRC32=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_DEV_MARVELL_CESA=y
+# CONFIG_CRYPTO_GHASH_ARM_CE is not set
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_NULL2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA1_ARM=y
+# CONFIG_CRYPTO_SHA1_ARM_CE is not set
+CONFIG_CRYPTO_SHA1_ARM_NEON=y
+CONFIG_CRYPTO_SHA256_ARM=y
+# CONFIG_CRYPTO_SHA2_ARM_CE is not set
+CONFIG_CRYPTO_SHA512_ARM=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
+CONFIG_DEBUG_MVEBU_UART0=y
+# CONFIG_DEBUG_MVEBU_UART0_ALTERNATE is not set
+# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set
+CONFIG_DEBUG_UART_8250=y
+# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
+CONFIG_DEBUG_UART_8250_SHIFT=2
+# CONFIG_DEBUG_UART_8250_WORD is not set
+CONFIG_DEBUG_UART_PHYS=0xd0012000
+CONFIG_DEBUG_UART_VIRT=0xfec12000
+CONFIG_DEBUG_UNCOMPRESS=y
+CONFIG_DEBUG_USER=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_ENGINE_RAID=y
+CONFIG_DMA_OF=y
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_EXT4_FS=y
+# CONFIG_F2FS_CHECK_FS is not set
+CONFIG_F2FS_FS=y
+# CONFIG_F2FS_FS_SECURITY is not set
+CONFIG_F2FS_FS_XATTR=y
+CONFIG_F2FS_STAT_FS=y
+CONFIG_FIXED_PHY=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_FS_MBCACHE=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_MSI_IRQ=y
+CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GLOB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_MVEBU=y
+CONFIG_GPIO_MVEBU_PWM=y
+CONFIG_GPIO_PCA953X=y
+# CONFIG_GPIO_PCA953X_IRQ is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+CONFIG_HAVE_ARCH_BITREVERSE=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_ARM_SCU=y
+CONFIG_HAVE_ARM_SMCCC=y
+CONFIG_HAVE_ARM_TWD=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CBPF_JIT=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SMP=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_UID16=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HIGHMEM=y
+# CONFIG_HIGHPTE is not set
+CONFIG_HOTPLUG_CPU=y
+CONFIG_HWBM=y
+CONFIG_HWMON=y
+CONFIG_HZ_FIXED=0
+CONFIG_HZ_PERIODIC=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MV64XXX=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IOMMU_HELPER=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+# CONFIG_IWMMXT is not set
+CONFIG_JBD2=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PCA963X=y
+CONFIG_LEDS_TLC591XX=y
+CONFIG_LIBFDT=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MACH_ARMADA_370=y
+# CONFIG_MACH_ARMADA_375 is not set
+CONFIG_MACH_ARMADA_38X=y
+# CONFIG_MACH_ARMADA_39X is not set
+CONFIG_MACH_ARMADA_XP=y
+# CONFIG_MACH_DOVE is not set
+CONFIG_MACH_MVEBU_ANY=y
+CONFIG_MACH_MVEBU_V7=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MANGLE_BOOTARGS=y
+CONFIG_MARVELL_PHY=y
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MDIO_I2C=y
+CONFIG_MEMORY=y
+# CONFIG_MFD_MAX77620 is not set
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_MIGHT_HAVE_PCI=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_MVSDIO=y
+CONFIG_MMC_SDHCI=y
+# CONFIG_MMC_SDHCI_PCI is not set
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_PXAV3=y
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_PXA3xx=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
+CONFIG_MTD_UBI_BLOCK=y
+# CONFIG_MTD_UBI_FASTMAP is not set
+# CONFIG_MTD_UBI_GLUEBI is not set
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MULTI_IRQ_HANDLER=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_MVEBU_CLK_COMMON=y
+CONFIG_MVEBU_CLK_COREDIV=y
+CONFIG_MVEBU_CLK_CPU=y
+CONFIG_MVEBU_DEVBUS=y
+CONFIG_MVEBU_MBUS=y
+CONFIG_MVMDIO=y
+CONFIG_MVNETA=y
+CONFIG_MVNETA_BM=y
+CONFIG_MVNETA_BM_ENABLE=y
+CONFIG_MVSW61XX_PHY=y
+CONFIG_MV_XOR=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEON=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NLS=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_NO_BOOTMEM=y
+CONFIG_NR_CPUS=4
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_ADDRESS_PCI=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_OF_RESERVED_MEM=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_ORION_WATCHDOG=y
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+CONFIG_PADATA=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DOMAINS_GENERIC=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MSI_IRQ_DOMAIN=y
+CONFIG_PCI_MVEBU=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PHYLINK=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_ARMADA_370=y
+CONFIG_PINCTRL_ARMADA_38X=y
+CONFIG_PINCTRL_ARMADA_XP=y
+CONFIG_PINCTRL_MVEBU=y
+# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_PJ4B_ERRATA_4742=y
+# CONFIG_PL310_ERRATA_588369 is not set
+# CONFIG_PL310_ERRATA_727915 is not set
+# CONFIG_PL310_ERRATA_753970 is not set
+# CONFIG_PL310_ERRATA_769419 is not set
+CONFIG_PLAT_ORION=y
+CONFIG_PM_OPP=y
+CONFIG_PWM=y
+CONFIG_PWM_SYSFS=y
+CONFIG_RATIONAL=y
+CONFIG_RCU_STALL_COMMON=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_SPI=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_ARMADA38X=y
+CONFIG_RTC_DRV_MV=y
+CONFIG_RTC_I2C_AND_SPI=y
+CONFIG_RTC_MC146818_LIB=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_MV=y
+CONFIG_SCHED_HRTICK=y
+# CONFIG_SCHED_INFO is not set
+CONFIG_SCSI=y
+CONFIG_SENSORS_PWM_FAN=y
+CONFIG_SENSORS_TMP421=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_MVEBU_CONSOLE=y
+CONFIG_SERIAL_MVEBU_UART=y
+CONFIG_SFP=y
+CONFIG_SMP=y
+CONFIG_SMP_ON_UP=y
+CONFIG_SOC_BUS=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+# CONFIG_SPI_CADENCE_QUADSPI is not set
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_ORION=y
+CONFIG_SRAM=y
+CONFIG_SRCU=y
+CONFIG_SWCONFIG=y
+CONFIG_SWIOTLB=y
+CONFIG_SWPHY=y
+CONFIG_SWP_EMULATE=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_THERMAL=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+CONFIG_THERMAL_GOV_STEP_WISE=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_THERMAL_OF=y
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_STATS=y
+CONFIG_TREE_RCU=y
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_USB=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_ORION=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_EHCI_PCI=y
+CONFIG_USB_LEDS_TRIGGER_USBPORT=y
+CONFIG_USB_PHY=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_UHCI_HCD is not set
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_MVEBU=y
+CONFIG_USB_XHCI_PCI=y
+CONFIG_USB_XHCI_PLATFORM=y
+CONFIG_USE_OF=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_XPS=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/mvebu/patches-4.9/002-add_powertables.patch b/target/linux/mvebu/patches-4.9/002-add_powertables.patch
new file mode 100644
index 0000000000..a5a47e4ab2
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/002-add_powertables.patch
@@ -0,0 +1,748 @@
+--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
++++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+@@ -86,12 +86,100 @@
+ pcie@2,0 {
+ /* Port 0, Lane 1 */
+ status = "okay";
++
++ mwlwifi {
++ marvell,5ghz = <0>;
++ marvell,chainmask = <4 4>;
++ marvell,powertable {
++ FCC =
++ <1 0 0x17 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>,
++ <2 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
++ <3 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
++ <4 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
++ <5 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
++ <6 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
++ <7 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
++ <8 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
++ <9 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
++ <10 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
++ <11 0 0x17 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>;
++
++ ETSI =
++ <1 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
++ <2 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
++ <3 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
++ <4 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
++ <5 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
++ <6 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
++ <7 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
++ <8 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
++ <9 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
++ <10 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
++ <11 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
++ <12 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
++ <13 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>;
++ };
++ };
+ };
+
+ /* Second mini-PCIe port */
+ pcie@3,0 {
+ /* Port 0, Lane 3 */
+ status = "okay";
++
++ mwlwifi {
++ marvell,2ghz = <0>;
++ marvell,chainmask = <4 4>;
++ marvell,powertable {
++ FCC =
++ <36 0 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
++ <40 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
++ <44 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
++ <48 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
++ <52 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
++ <56 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
++ <60 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
++ <64 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
++ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <149 0 0x16 0x16 0x16 0x16 0x14 0x14 0x14 0x14 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
++ <153 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
++ <157 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
++ <161 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
++ <165 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>;
++
++ ETSI =
++ <36 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++ <40 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++ <44 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++ <48 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++ <52 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++ <56 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++ <60 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++ <64 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++ <100 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++ <104 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++ <108 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++ <112 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++ <116 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++ <120 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++ <124 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++ <128 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++ <132 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++ <136 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++ <140 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++ <149 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>;
++ };
++ };
+ };
+ };
+
+--- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
++++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
+@@ -100,6 +100,212 @@
+ };
+ };
+ };
++
++ pcie-controller {
++ pcie@1,0 {
++ mwlwifi {
++ marvell,2ghz = <0>;
++ marvell,chainmask = <4 4>;
++ marvell,powertable {
++ AU =
++ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <149 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
++ <153 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
++ <157 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
++ <161 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
++ <165 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>;
++ CA =
++ <36 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
++ <40 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
++ <44 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
++ <48 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
++ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
++ CN =
++ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <149 0 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
++ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
++ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
++ <165 0 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>;
++ ETSI =
++ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <149 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>;
++ FCC =
++ <36 0 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0 0xf>,
++ <40 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
++ <44 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
++ <48 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
++ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
++ };
++ };
++ };
++
++ pcie@2,0 {
++ mwlwifi {
++ marvell,5ghz = <0>;
++ marvell,chainmask = <4 4>;
++ marvell,powertable {
++ AU =
++ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
++ CA =
++ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
++ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
++ CN =
++ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <14 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
++ ETSI =
++ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
++ FCC =
++ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
++ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
++ };
++ };
++ };
++ };
+ };
+
+ gpio-leds {
+--- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
++++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
+@@ -100,6 +100,212 @@
+ };
+ };
+ };
++
++ pcie-controller {
++ pcie@1,0 {
++ mwlwifi {
++ marvell,2ghz = <0>;
++ marvell,chainmask = <2 2>;
++ marvell,powertable {
++ AU =
++ <36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <100 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
++ <104 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
++ <108 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
++ <112 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
++ <116 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
++ <120 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
++ <124 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
++ <128 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
++ <132 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
++ <136 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
++ <140 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
++ <149 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
++ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
++ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
++ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
++ <165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>;
++ CA =
++ <36 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
++ <40 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
++ <44 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
++ <48 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
++ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <149 0 0x1a 0x1a 0x18 0x17 0x19 0x19 0x17 0x15 0x18 0x18 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
++ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
++ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
++ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
++ <165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>;
++ CN =
++ <36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <100 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <104 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <108 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <112 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <116 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <120 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <124 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <128 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <132 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <136 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <140 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <149 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x11 0x11 0x11 0x11 0 0xf>,
++ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
++ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
++ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
++ <165 0 0x15 0x15 0x15 0x15 0x16 0x16 0x16 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>;
++ ETSI =
++ <36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <100 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <104 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <108 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <112 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <116 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <120 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <124 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <128 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <132 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <136 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <140 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++ <149 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>;
++ FCC =
++ <36 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <40 0 0x19 0x19 0x18 0x17 0x19 0x19 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
++ <44 0 0x19 0x19 0x18 0x17 0x19 0x19 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
++ <48 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
++ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <149 0 0x1a 0x1a 0x18 0x17 0x19 0x19 0x17 0x15 0x18 0x18 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
++ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
++ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
++ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
++ <165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>;
++ };
++ };
++ };
++
++ pcie@2,0 {
++ mwlwifi {
++ marvell,5ghz = <0>;
++ marvell,chainmask = <2 2>;
++ marvell,powertable {
++ AU =
++ <1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
++ CA =
++ <1 0 0x19 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x10 0x10 0x10 0x10 0x00 0x00 0x00 0x00 0 0xf>,
++ <2 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
++ <3 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
++ <4 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
++ <5 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
++ <6 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
++ <7 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
++ <8 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
++ <9 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
++ <10 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
++ <11 0 0x19 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x00 0x00 0x00 0x00 0 0xf>;
++ CN =
++ <1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <12 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <13 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <14 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
++ ETSI =
++ <1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <12 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++ <13 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
++ FCC =
++ <1 0 0x19 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
++ <2 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
++ <3 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
++ <4 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
++ <5 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
++ <6 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
++ <7 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
++ <8 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
++ <9 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
++ <10 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
++ <11 0 0x19 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x0 0x0 0x0 0x0 0 0xf>;
++ };
++ };
++ };
++ };
+ };
+
+ gpio-leds {
+--- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
++++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
+@@ -100,6 +100,212 @@
+ };
+ };
+ };
++
++ pcie-controller {
++ pcie@1,0 {
++ mwlwifi {
++ marvell,2ghz = <0>;
++ marvell,chainmask = <4 4>;
++ marvell,powertable {
++ AU =
++ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++ <149 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
++ <153 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
++ <157 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
++ <161 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
++ <165 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>;
++ CA =
++ <36 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
++ <40 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
++ <44 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
++ <48 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
++ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
++ CN =
++ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <149 0 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
++ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
++ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
++ <165 0 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>;
++ ETSI =
++ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++ <149 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>;
++ FCC =
++ <36 0 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0 0xf>,
++ <40 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
++ <44 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
++ <48 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
++ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
++ };
++ };
++ };
++
++ pcie@2,0 {
++ mwlwifi {
++ marvell,5ghz = <0>;
++ marvell,chainmask = <4 4>;
++ marvell,powertable {
++ AU =
++ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
++ CA =
++ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
++ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
++ CN =
++ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <14 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
++ ETSI =
++ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
++ FCC =
++ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
++ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
++ };
++ };
++ };
++ };
+ };
+
+ gpio-leds {
diff --git a/target/linux/mvebu/patches-4.9/003-add_switch_nodes.patch b/target/linux/mvebu/patches-4.9/003-add_switch_nodes.patch
new file mode 100644
index 0000000000..38a48d308e
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/003-add_switch_nodes.patch
@@ -0,0 +1,40 @@
+--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
++++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+@@ -455,6 +455,16 @@
+ };
+ };
+ };
++
++ mvsw61xx {
++ compatible = "marvell,88e6172";
++ status = "okay";
++ reg = <0x10>;
++
++ mii-bus = <&mdio>;
++ cpu-port-0 = <5>;
++ cpu-port-1 = <6>;
++ };
+ };
+
+ &pinctrl {
+--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
++++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
+@@ -304,6 +304,18 @@
+ };
+ };
+ };
++
++ mvsw61xx {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ compatible = "marvell,88e6176";
++ status = "okay";
++ reg = <0x10>;
++
++ mii-bus = <&mdio>;
++ cpu-port-0 = <5>;
++ cpu-port-1 = <6>;
++ };
+ };
+
+ &pinctrl {
diff --git a/target/linux/mvebu/patches-4.9/010-build_new_dtbs.patch b/target/linux/mvebu/patches-4.9/010-build_new_dtbs.patch
new file mode 100644
index 0000000000..1eb647df9c
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/010-build_new_dtbs.patch
@@ -0,0 +1,11 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -921,6 +921,8 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
+ armada-385-db-ap.dtb \
+ armada-385-linksys-caiman.dtb \
+ armada-385-linksys-cobra.dtb \
++ armada-385-linksys-rango.dtb \
++ armada-385-linksys-shelby.dtb \
+ armada-388-clearfog.dtb \
+ armada-388-db.dtb \
+ armada-388-gp.dtb \
diff --git a/target/linux/mvebu/patches-4.9/100-find_active_root.patch b/target/linux/mvebu/patches-4.9/100-find_active_root.patch
new file mode 100644
index 0000000000..b8e8c92aab
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/100-find_active_root.patch
@@ -0,0 +1,60 @@
+The WRT1900AC among other Linksys routers uses a dual-firmware layout.
+Dynamically rename the active partition to "ubi".
+
+Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
+
+--- a/drivers/mtd/ofpart.c
++++ b/drivers/mtd/ofpart.c
+@@ -25,6 +25,8 @@ static bool node_has_compatible(struct d
+ return of_get_property(pp, "compatible", NULL);
+ }
+
++static int mangled_rootblock;
++
+ static int parse_ofpart_partitions(struct mtd_info *master,
+ const struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+@@ -33,6 +35,7 @@ static int parse_ofpart_partitions(struc
+ struct device_node *mtd_node;
+ struct device_node *ofpart_node;
+ const char *partname;
++ const char *owrtpart = "ubi";
+ struct device_node *pp;
+ int nr_parts, i, ret = 0;
+ bool dedicated = true;
+@@ -109,9 +112,13 @@ static int parse_ofpart_partitions(struc
+ parts[i].offset = of_read_number(reg, a_cells);
+ parts[i].size = of_read_number(reg + a_cells, s_cells);
+
+- partname = of_get_property(pp, "label", &len);
+- if (!partname)
+- partname = of_get_property(pp, "name", &len);
++ if (mangled_rootblock && (i == mangled_rootblock)) {
++ partname = owrtpart;
++ } else {
++ partname = of_get_property(pp, "label", &len);
++ if (!partname)
++ partname = of_get_property(pp, "name", &len);
++ }
+ parts[i].name = partname;
+
+ if (of_get_property(pp, "read-only", &len))
+@@ -212,6 +219,18 @@ static int __init ofpart_parser_init(voi
+ return 0;
+ }
+
++static int __init active_root(char *str)
++{
++ get_option(&str, &mangled_rootblock);
++
++ if (!mangled_rootblock)
++ return 1;
++
++ return 1;
++}
++
++__setup("mangled_rootblock=", active_root);
++
+ static void __exit ofpart_parser_exit(void)
+ {
+ deregister_mtd_parser(&ofpart_parser);
diff --git a/target/linux/mvebu/patches-4.9/102-revert_i2c_delay.patch b/target/linux/mvebu/patches-4.9/102-revert_i2c_delay.patch
new file mode 100644
index 0000000000..473bdd9973
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/102-revert_i2c_delay.patch
@@ -0,0 +1,15 @@
+--- a/arch/arm/boot/dts/armada-xp.dtsi
++++ b/arch/arm/boot/dts/armada-xp.dtsi
+@@ -85,12 +85,10 @@
+ };
+
+ i2c0: i2c@11000 {
+- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+ reg = <0x11000 0x100>;
+ };
+
+ i2c1: i2c@11100 {
+- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+ reg = <0x11100 0x100>;
+ };
+
diff --git a/target/linux/mvebu/patches-4.9/103-remove-nand-driver-bug.patch b/target/linux/mvebu/patches-4.9/103-remove-nand-driver-bug.patch
new file mode 100644
index 0000000000..19a2a1e276
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/103-remove-nand-driver-bug.patch
@@ -0,0 +1,13 @@
+Remove a BUG() call that would crash on a race condition that should
+otherwise be harmless.
+
+--- a/drivers/mtd/nand/pxa3xx_nand.c
++++ b/drivers/mtd/nand/pxa3xx_nand.c
+@@ -727,7 +727,6 @@ static void handle_data_pio(struct pxa3x
+ default:
+ dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
+ info->state);
+- BUG();
+ }
+
+ /* Update buffer pointers for multi-page read/write */
diff --git a/target/linux/mvebu/patches-4.9/104-linksys_mamba_disable_keep_config.patch b/target/linux/mvebu/patches-4.9/104-linksys_mamba_disable_keep_config.patch
new file mode 100644
index 0000000000..4c6b3115ed
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/104-linksys_mamba_disable_keep_config.patch
@@ -0,0 +1,10 @@
+--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
++++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+@@ -298,7 +298,6 @@
+ nand@d0000 {
+ status = "okay";
+ num-cs = <1>;
+- marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
diff --git a/target/linux/mvebu/patches-4.9/106-enable-bm-on-linksys-devices.patch b/target/linux/mvebu/patches-4.9/106-enable-bm-on-linksys-devices.patch
new file mode 100644
index 0000000000..39e713898a
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/106-enable-bm-on-linksys-devices.patch
@@ -0,0 +1,107 @@
+--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
++++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
+@@ -59,7 +59,8 @@
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
++ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
++ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+ internal-regs {
+ i2c@11000 {
+@@ -88,6 +89,9 @@
+ ethernet@70000 {
+ status = "okay";
+ phy-mode = "rgmii-id";
++ buffer-manager = <&bm>;
++ bm,pool-long = <0>;
++ bm,pool-short = <3>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+@@ -97,6 +101,9 @@
+ ethernet@34000 {
+ status = "okay";
+ phy-mode = "sgmii";
++ buffer-manager = <&bm>;
++ bm,pool-long = <2>;
++ bm,pool-short = <3>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+@@ -107,6 +114,10 @@
+ status = "okay";
+ };
+
++ bm@c8000 {
++ status = "okay";
++ };
++
+ sata@a8000 {
+ status = "okay";
+ };
+@@ -193,6 +204,10 @@
+ };
+ };
+
++ bm-bppi {
++ status = "okay";
++ };
++
+ pcie-controller {
+ status = "okay";
+
+--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
++++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+@@ -71,7 +71,8 @@
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+- MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
++ MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
++ MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
+
+ pcie-controller {
+ status = "okay";
+@@ -205,6 +206,9 @@
+ pinctrl-names = "default";
+ status = "okay";
+ phy-mode = "rgmii-id";
++ buffer-manager = <&bm>;
++ bm,pool-long = <0>;
++ bm,pool-short = <3>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+@@ -216,12 +220,19 @@
+ pinctrl-names = "default";
+ status = "okay";
+ phy-mode = "rgmii-id";
++ buffer-manager = <&bm>;
++ bm,pool-long = <1>;
++ bm,pool-short = <3>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
++ bm@c0000 {
++ status = "okay";
++ };
++
+ /* USB part of the eSATA/USB 2.0 port */
+ usb@50000 {
+ status = "okay";
+@@ -367,6 +378,10 @@
+ };
+ };
+ };
++
++ bm-bppi {
++ status = "okay";
++ };
+ };
+
+ gpio_keys {
diff --git a/target/linux/mvebu/patches-4.9/110-pxa3xxx_revert_irq_thread.patch b/target/linux/mvebu/patches-4.9/110-pxa3xxx_revert_irq_thread.patch
new file mode 100644
index 0000000000..419306ed90
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/110-pxa3xxx_revert_irq_thread.patch
@@ -0,0 +1,69 @@
+Revert "mtd: pxa3xx-nand: handle PIO in threaded interrupt"
+
+This reverts commit 24542257a3b987025d4b998ec2d15e556c98ad3f
+This upstream change has been causing spurious timeouts on accesses
+to the NAND flash if something else on the system is causing
+significant latency.
+
+Nothing guarantees that the thread will run in time, so the
+usual timeout is unreliable.
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+
+--- a/drivers/mtd/nand/pxa3xx_nand.c
++++ b/drivers/mtd/nand/pxa3xx_nand.c
+@@ -791,24 +791,11 @@ static void start_data_dma(struct pxa3xx
+ __func__, direction, info->dma_cookie, info->sg.length);
+ }
+
+-static irqreturn_t pxa3xx_nand_irq_thread(int irq, void *data)
+-{
+- struct pxa3xx_nand_info *info = data;
+-
+- handle_data_pio(info);
+-
+- info->state = STATE_CMD_DONE;
+- nand_writel(info, NDSR, NDSR_WRDREQ | NDSR_RDDREQ);
+-
+- return IRQ_HANDLED;
+-}
+-
+ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
+ {
+ struct pxa3xx_nand_info *info = devid;
+ unsigned int status, is_completed = 0, is_ready = 0;
+ unsigned int ready, cmd_done;
+- irqreturn_t ret = IRQ_HANDLED;
+
+ if (info->cs == 0) {
+ ready = NDSR_FLASH_RDY;
+@@ -850,8 +837,7 @@ static irqreturn_t pxa3xx_nand_irq(int i
+ } else {
+ info->state = (status & NDSR_RDDREQ) ?
+ STATE_PIO_READING : STATE_PIO_WRITING;
+- ret = IRQ_WAKE_THREAD;
+- goto NORMAL_IRQ_EXIT;
++ handle_data_pio(info);
+ }
+ }
+ if (status & cmd_done) {
+@@ -896,7 +882,7 @@ static irqreturn_t pxa3xx_nand_irq(int i
+ if (is_ready)
+ complete(&info->dev_ready);
+ NORMAL_IRQ_EXIT:
+- return ret;
++ return IRQ_HANDLED;
+ }
+
+ static inline int is_buf_blank(uint8_t *buf, size_t len)
+@@ -1856,9 +1842,7 @@ static int alloc_nand_resource(struct pl
+ /* initialize all interrupts to be disabled */
+ disable_int(info, NDSR_MASK);
+
+- ret = request_threaded_irq(irq, pxa3xx_nand_irq,
+- pxa3xx_nand_irq_thread, IRQF_ONESHOT,
+- pdev->name, info);
++ ret = request_irq(irq, pxa3xx_nand_irq, 0, pdev->name, info);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to request IRQ\n");
+ goto fail_free_buf;
diff --git a/target/linux/mvebu/patches-4.9/120-net-mvneta-add-BQL-support.patch b/target/linux/mvebu/patches-4.9/120-net-mvneta-add-BQL-support.patch
new file mode 100644
index 0000000000..0b822f3863
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/120-net-mvneta-add-BQL-support.patch
@@ -0,0 +1,83 @@
+--- a/drivers/net/ethernet/marvell/mvneta.c
++++ b/drivers/net/ethernet/marvell/mvneta.c
+@@ -1719,8 +1719,10 @@ static struct mvneta_tx_queue *mvneta_tx
+
+ /* Free tx queue skbuffs */
+ static void mvneta_txq_bufs_free(struct mvneta_port *pp,
+- struct mvneta_tx_queue *txq, int num)
++ struct mvneta_tx_queue *txq, int num,
++ struct netdev_queue *nq)
+ {
++ unsigned int bytes_compl = 0, pkts_compl = 0;
+ int i;
+
+ for (i = 0; i < num; i++) {
+@@ -1728,6 +1730,11 @@ static void mvneta_txq_bufs_free(struct
+ txq->txq_get_index;
+ struct sk_buff *skb = txq->tx_skb[txq->txq_get_index];
+
++ if (skb) {
++ bytes_compl += skb->len;
++ pkts_compl++;
++ }
++
+ mvneta_txq_inc_get(txq);
+
+ if (!IS_TSO_HEADER(txq, tx_desc->buf_phys_addr))
+@@ -1738,6 +1745,8 @@ static void mvneta_txq_bufs_free(struct
+ continue;
+ dev_kfree_skb_any(skb);
+ }
++
++ netdev_tx_completed_queue(nq, pkts_compl, bytes_compl);
+ }
+
+ /* Handle end of transmission */
+@@ -1751,7 +1760,7 @@ static void mvneta_txq_done(struct mvnet
+ if (!tx_done)
+ return;
+
+- mvneta_txq_bufs_free(pp, txq, tx_done);
++ mvneta_txq_bufs_free(pp, txq, tx_done, nq);
+
+ txq->count -= tx_done;
+
+@@ -2358,6 +2367,8 @@ out:
+ struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats);
+ struct netdev_queue *nq = netdev_get_tx_queue(dev, txq_id);
+
++ netdev_tx_sent_queue(nq, len);
++
+ txq->count += frags;
+ mvneta_txq_pend_desc_add(pp, txq, frags);
+
+@@ -2382,9 +2393,10 @@ static void mvneta_txq_done_force(struct
+ struct mvneta_tx_queue *txq)
+
+ {
++ struct netdev_queue *nq = netdev_get_tx_queue(pp->dev, txq->id);
+ int tx_done = txq->count;
+
+- mvneta_txq_bufs_free(pp, txq, tx_done);
++ mvneta_txq_bufs_free(pp, txq, tx_done, nq);
+
+ /* reset txq */
+ txq->count = 0;
+@@ -2882,6 +2894,8 @@ static int mvneta_txq_init(struct mvneta
+ static void mvneta_txq_deinit(struct mvneta_port *pp,
+ struct mvneta_tx_queue *txq)
+ {
++ struct netdev_queue *nq = netdev_get_tx_queue(pp->dev, txq->id);
++
+ kfree(txq->tx_skb);
+
+ if (txq->tso_hdrs)
+@@ -2893,6 +2907,8 @@ static void mvneta_txq_deinit(struct mvn
+ txq->size * MVNETA_DESC_ALIGNED_SIZE,
+ txq->descs, txq->descs_phys);
+
++ netdev_tx_reset_queue(nq);
++
+ txq->descs = NULL;
+ txq->last_desc = 0;
+ txq->next_desc_to_proc = 0;
diff --git a/target/linux/mvebu/patches-4.9/200-gpio_mvebu_add_limited_pwm_support.patch b/target/linux/mvebu/patches-4.9/200-gpio_mvebu_add_limited_pwm_support.patch
new file mode 100644
index 0000000000..0261b1e538
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/200-gpio_mvebu_add_limited_pwm_support.patch
@@ -0,0 +1,433 @@
+Armada 370/XP devices can 'blink' gpio lines with a configurable on
+and off period. This can be modelled as a PWM.
+
+However, there are only two sets of PWM configuration registers for
+all the gpio lines. This driver simply allows a single gpio line per
+gpio chip of 32 lines to be used as a PWM. Attempts to use more return
+EBUSY.
+
+Due to the interleaving of registers it is not simple to separate the
+PWM driver from the gpio driver. Thus the gpio driver has been
+extended with a PWM driver.
+
+Signed-off-by: Andrew Lunn <andrew@lunn.ch>
+---
+ drivers/gpio/Kconfig | 5 ++
+ drivers/gpio/Makefile | 1 +
+ drivers/gpio/gpio-mvebu-pwm.c | 202 ++++++++++++++++++++++++++++++++++++++++++
+ drivers/gpio/gpio-mvebu.c | 37 +++-----
+ drivers/gpio/gpio-mvebu.h | 79 +++++++++++++++++
+ 5 files changed, 299 insertions(+), 25 deletions(-)
+ create mode 100644 drivers/gpio/gpio-mvebu-pwm.c
+ create mode 100644 drivers/gpio/gpio-mvebu.h
+
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -319,6 +319,11 @@ config GPIO_MVEBU
+ depends on OF_GPIO
+ select GENERIC_IRQ_CHIP
+
++config GPIO_MVEBU_PWM
++ def_bool y
++ depends on GPIO_MVEBU
++ depends on PWM
++
+ config GPIO_MXC
+ def_bool y
+ depends on ARCH_MXC
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -81,6 +81,7 @@ obj-$(CONFIG_GPIO_MPC5200) += gpio-mpc52
+ obj-$(CONFIG_GPIO_MPC8XXX) += gpio-mpc8xxx.o
+ obj-$(CONFIG_GPIO_MSIC) += gpio-msic.o
+ obj-$(CONFIG_GPIO_MVEBU) += gpio-mvebu.o
++obj-$(CONFIG_GPIO_MVEBU_PWM) += gpio-mvebu-pwm.o
+ obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o
+ obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o
+ obj-$(CONFIG_GPIO_OCTEON) += gpio-octeon.o
+--- /dev/null
++++ b/drivers/gpio/gpio-mvebu-pwm.c
+@@ -0,0 +1,202 @@
++#include <linux/err.h>
++#include <linux/module.h>
++#include <linux/gpio.h>
++#include <linux/pwm.h>
++#include <linux/clk.h>
++#include <linux/platform_device.h>
++#include "gpio-mvebu.h"
++#include "gpiolib.h"
++
++static void __iomem *mvebu_gpioreg_blink_select(struct mvebu_gpio_chip *mvchip)
++{
++ return mvchip->membase + GPIO_BLINK_CNT_SELECT;
++}
++
++static inline struct mvebu_pwm *to_mvebu_pwm(struct pwm_chip *chip)
++{
++ return container_of(chip, struct mvebu_pwm, chip);
++}
++
++static inline struct mvebu_gpio_chip *to_mvchip(struct mvebu_pwm *pwm)
++{
++ return container_of(pwm, struct mvebu_gpio_chip, pwm);
++}
++
++static int mvebu_pwm_request(struct pwm_chip *chip, struct pwm_device *pwmd)
++{
++ struct mvebu_pwm *pwm = to_mvebu_pwm(chip);
++ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm);
++ struct gpio_desc *desc = gpio_to_desc(pwmd->pwm);
++ unsigned long flags;
++ int ret = 0;
++
++ spin_lock_irqsave(&pwm->lock, flags);
++ if (pwm->used) {
++ ret = -EBUSY;
++ } else {
++ if (!desc) {
++ ret = -ENODEV;
++ goto out;
++ }
++ ret = gpiod_request(desc, "mvebu-pwm");
++ if (ret)
++ goto out;
++
++ ret = gpiod_direction_output(desc, 0);
++ if (ret) {
++ gpiod_free(desc);
++ goto out;
++ }
++
++ pwm->pin = pwmd->pwm - mvchip->chip.base;
++ pwm->used = true;
++ }
++
++out:
++ spin_unlock_irqrestore(&pwm->lock, flags);
++ return ret;
++}
++
++static void mvebu_pwm_free(struct pwm_chip *chip, struct pwm_device *pwmd)
++{
++ struct mvebu_pwm *pwm = to_mvebu_pwm(chip);
++ struct gpio_desc *desc = gpio_to_desc(pwmd->pwm);
++ unsigned long flags;
++
++ spin_lock_irqsave(&pwm->lock, flags);
++ gpiod_free(desc);
++ pwm->used = false;
++ spin_unlock_irqrestore(&pwm->lock, flags);
++}
++
++static int mvebu_pwm_config(struct pwm_chip *chip, struct pwm_device *pwmd,
++ int duty_ns, int period_ns)
++{
++ struct mvebu_pwm *pwm = to_mvebu_pwm(chip);
++ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm);
++ unsigned int on, off;
++ unsigned long long val;
++ u32 u;
++
++ val = (unsigned long long) pwm->clk_rate * duty_ns;
++ do_div(val, NSEC_PER_SEC);
++ if (val > UINT_MAX)
++ return -EINVAL;
++ if (val)
++ on = val;
++ else
++ on = 1;
++
++ val = (unsigned long long) pwm->clk_rate * (period_ns - duty_ns);
++ do_div(val, NSEC_PER_SEC);
++ if (val > UINT_MAX)
++ return -EINVAL;
++ if (val)
++ off = val;
++ else
++ off = 1;
++
++ u = readl_relaxed(mvebu_gpioreg_blink_select(mvchip));
++ u &= ~(1 << pwm->pin);
++ u |= (pwm->id << pwm->pin);
++ writel_relaxed(u, mvebu_gpioreg_blink_select(mvchip));
++
++ writel_relaxed(on, pwm->membase + BLINK_ON_DURATION);
++ writel_relaxed(off, pwm->membase + BLINK_OFF_DURATION);
++
++ return 0;
++}
++
++static int mvebu_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwmd)
++{
++ struct mvebu_pwm *pwm = to_mvebu_pwm(chip);
++ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm);
++
++ mvebu_gpio_blink(&mvchip->chip, pwm->pin, 1);
++
++ return 0;
++}
++
++static void mvebu_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwmd)
++{
++ struct mvebu_pwm *pwm = to_mvebu_pwm(chip);
++ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm);
++
++ mvebu_gpio_blink(&mvchip->chip, pwm->pin, 0);
++}
++
++static const struct pwm_ops mvebu_pwm_ops = {
++ .request = mvebu_pwm_request,
++ .free = mvebu_pwm_free,
++ .config = mvebu_pwm_config,
++ .enable = mvebu_pwm_enable,
++ .disable = mvebu_pwm_disable,
++ .owner = THIS_MODULE,
++};
++
++void mvebu_pwm_suspend(struct mvebu_gpio_chip *mvchip)
++{
++ struct mvebu_pwm *pwm = &mvchip->pwm;
++
++ pwm->blink_select = readl_relaxed(mvebu_gpioreg_blink_select(mvchip));
++ pwm->blink_on_duration =
++ readl_relaxed(pwm->membase + BLINK_ON_DURATION);
++ pwm->blink_off_duration =
++ readl_relaxed(pwm->membase + BLINK_OFF_DURATION);
++}
++
++void mvebu_pwm_resume(struct mvebu_gpio_chip *mvchip)
++{
++ struct mvebu_pwm *pwm = &mvchip->pwm;
++
++ writel_relaxed(pwm->blink_select, mvebu_gpioreg_blink_select(mvchip));
++ writel_relaxed(pwm->blink_on_duration,
++ pwm->membase + BLINK_ON_DURATION);
++ writel_relaxed(pwm->blink_off_duration,
++ pwm->membase + BLINK_OFF_DURATION);
++}
++
++/*
++ * Armada 370/XP has simple PWM support for gpio lines. Other SoCs
++ * don't have this hardware. So if we don't have the necessary
++ * resource, it is not an error.
++ */
++int mvebu_pwm_probe(struct platform_device *pdev,
++ struct mvebu_gpio_chip *mvchip,
++ int id)
++{
++ struct device *dev = &pdev->dev;
++ struct mvebu_pwm *pwm = &mvchip->pwm;
++ struct resource *res;
++
++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pwm");
++ if (!res)
++ return 0;
++
++ mvchip->pwm.membase = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(mvchip->pwm.membase))
++ return PTR_ERR(mvchip->percpu_membase);
++
++ if (id < 0 || id > 1)
++ return -EINVAL;
++ pwm->id = id;
++
++ if (IS_ERR(mvchip->clk))
++ return PTR_ERR(mvchip->clk);
++
++ pwm->clk_rate = clk_get_rate(mvchip->clk);
++ if (!pwm->clk_rate) {
++ dev_err(dev, "failed to get clock rate\n");
++ return -EINVAL;
++ }
++
++ pwm->chip.dev = dev;
++ pwm->chip.ops = &mvebu_pwm_ops;
++ pwm->chip.base = mvchip->chip.base;
++ pwm->chip.npwm = mvchip->chip.ngpio;
++ pwm->chip.can_sleep = false;
++
++ spin_lock_init(&pwm->lock);
++
++ return pwmchip_add(&pwm->chip);
++}
+--- a/drivers/gpio/gpio-mvebu.c
++++ b/drivers/gpio/gpio-mvebu.c
+@@ -42,10 +42,11 @@
+ #include <linux/io.h>
+ #include <linux/of_irq.h>
+ #include <linux/of_device.h>
++#include <linux/pwm.h>
+ #include <linux/clk.h>
+ #include <linux/pinctrl/consumer.h>
+ #include <linux/irqchip/chained_irq.h>
+-
++#include "gpio-mvebu.h"
+ /*
+ * GPIO unit register offsets.
+ */
+@@ -75,24 +76,6 @@
+
+ #define MVEBU_MAX_GPIO_PER_BANK 32
+
+-struct mvebu_gpio_chip {
+- struct gpio_chip chip;
+- spinlock_t lock;
+- void __iomem *membase;
+- void __iomem *percpu_membase;
+- int irqbase;
+- struct irq_domain *domain;
+- int soc_variant;
+-
+- /* Used to preserve GPIO registers across suspend/resume */
+- u32 out_reg;
+- u32 io_conf_reg;
+- u32 blink_en_reg;
+- u32 in_pol_reg;
+- u32 edge_mask_regs[4];
+- u32 level_mask_regs[4];
+-};
+-
+ /*
+ * Functions returning addresses of individual registers for a given
+ * GPIO controller.
+@@ -216,7 +199,7 @@ static int mvebu_gpio_get(struct gpio_ch
+ return (u >> pin) & 1;
+ }
+
+-static void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value)
++void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value)
+ {
+ struct mvebu_gpio_chip *mvchip = gpiochip_get_data(chip);
+ unsigned long flags;
+@@ -596,6 +579,8 @@ static int mvebu_gpio_suspend(struct pla
+ BUG();
+ }
+
++ mvebu_pwm_suspend(mvchip);
++
+ return 0;
+ }
+
+@@ -639,6 +624,8 @@ static int mvebu_gpio_resume(struct plat
+ BUG();
+ }
+
++ mvebu_pwm_resume(mvchip);
++
+ return 0;
+ }
+
+@@ -650,7 +637,6 @@ static int mvebu_gpio_probe(struct platf
+ struct resource *res;
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+- struct clk *clk;
+ unsigned int ngpios;
+ bool have_irqs;
+ int soc_variant;
+@@ -684,10 +670,10 @@ static int mvebu_gpio_probe(struct platf
+ return id;
+ }
+
+- clk = devm_clk_get(&pdev->dev, NULL);
++ mvchip->clk = devm_clk_get(&pdev->dev, NULL);
+ /* Not all SoCs require a clock.*/
+- if (!IS_ERR(clk))
+- clk_prepare_enable(clk);
++ if (!IS_ERR(mvchip->clk))
++ clk_prepare_enable(mvchip->clk);
+
+ mvchip->soc_variant = soc_variant;
+ mvchip->chip.label = dev_name(&pdev->dev);
+@@ -814,7 +800,8 @@ static int mvebu_gpio_probe(struct platf
+ mvchip);
+ }
+
+- return 0;
++ /* Armada 370/XP has simple PWM support for gpio lines */
++ return mvebu_pwm_probe(pdev, mvchip, id);
+
+ err_domain:
+ irq_domain_remove(mvchip->domain);
+--- /dev/null
++++ b/drivers/gpio/gpio-mvebu.h
+@@ -0,0 +1,79 @@
++/*
++ * Interface between MVEBU GPIO driver and PWM driver for GPIO pins
++ *
++ * Copyright (C) 2015, Andrew Lunn <andrew@lunn.ch>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#ifndef MVEBU_GPIO_PWM_H
++#define MVEBU_GPIO_PWM_H
++
++#define BLINK_ON_DURATION 0x0
++#define BLINK_OFF_DURATION 0x4
++#define GPIO_BLINK_CNT_SELECT 0x0020
++
++struct mvebu_pwm {
++ void __iomem *membase;
++ unsigned long clk_rate;
++ bool used;
++ unsigned pin;
++ struct pwm_chip chip;
++ int id;
++ spinlock_t lock;
++
++ /* Used to preserve GPIO/PWM registers across suspend /
++ * resume */
++ u32 blink_select;
++ u32 blink_on_duration;
++ u32 blink_off_duration;
++};
++
++struct mvebu_gpio_chip {
++ struct gpio_chip chip;
++ spinlock_t lock;
++ void __iomem *membase;
++ void __iomem *percpu_membase;
++ int irqbase;
++ struct irq_domain *domain;
++ int soc_variant;
++ struct clk *clk;
++#ifdef CONFIG_PWM
++ struct mvebu_pwm pwm;
++#endif
++ /* Used to preserve GPIO registers across suspend/resume */
++ u32 out_reg;
++ u32 io_conf_reg;
++ u32 blink_en_reg;
++ u32 in_pol_reg;
++ u32 edge_mask_regs[4];
++ u32 level_mask_regs[4];
++};
++
++void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value);
++
++#ifdef CONFIG_PWM
++int mvebu_pwm_probe(struct platform_device *pdev,
++ struct mvebu_gpio_chip *mvchip,
++ int id);
++void mvebu_pwm_suspend(struct mvebu_gpio_chip *mvchip);
++void mvebu_pwm_resume(struct mvebu_gpio_chip *mvchip);
++#else
++int mvebu_pwm_probe(struct platform_device *pdev,
++ struct mvebu_gpio_chip *mvchip,
++ int id)
++{
++ return 0;
++}
++
++void mvebu_pwm_suspend(struct mvebu_gpio_chip *mvchip)
++{
++}
++
++void mvebu_pwm_resume(struct mvebu_gpio_chip *mvchip)
++{
++}
++#endif
++#endif
diff --git a/target/linux/mvebu/patches-4.9/201-dt_bindings_extend_mvebu_gpio_documentation_with_pwm.patch b/target/linux/mvebu/patches-4.9/201-dt_bindings_extend_mvebu_gpio_documentation_with_pwm.patch
new file mode 100644
index 0000000000..48f93944bf
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/201-dt_bindings_extend_mvebu_gpio_documentation_with_pwm.patch
@@ -0,0 +1,52 @@
+Document the optional parameters needed for PWM operation of gpio
+lines.
+
+Signed-off-by: Andrew Lunn <andrew@lunn.ch>
+---
+ .../devicetree/bindings/gpio/gpio-mvebu.txt | 31 ++++++++++++++++++++++
+ 1 file changed, 31 insertions(+)
+
+--- a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
++++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
+@@ -38,6 +38,23 @@ Required properties:
+ - #gpio-cells: Should be two. The first cell is the pin number. The
+ second cell is reserved for flags, unused at the moment.
+
++Optional properties:
++
++In order to use the gpio lines in PWM mode, some additional optional
++properties are required. Only Armada 370 and XP supports these
++properties.
++
++- reg: an additional register set is needed, for the GPIO Blink
++ Counter on/off registers.
++
++- reg-names: Must contain an entry "pwm" corresponding to the
++ additional register range needed for pwm operation.
++
++- #pwm-cells: Should be two. The first cell is the pin number. The
++ second cell is reserved for flags, unused at the moment.
++
++- clocks: Must be a phandle to the clock for the gpio controller.
++
+ Example:
+
+ gpio0: gpio@d0018100 {
+@@ -51,3 +68,17 @@ Example:
+ #interrupt-cells = <2>;
+ interrupts = <16>, <17>, <18>, <19>;
+ };
++
++ gpio1: gpio@18140 {
++ compatible = "marvell,orion-gpio";
++ reg = <0x18140 0x40>, <0x181c8 0x08>;
++ reg-names = "gpio", "pwm";
++ ngpios = <17>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ #pwm-cells = <2>;
++ interrupt-controller;
++ #interrupt-cells = <2>;
++ interrupts = <87>, <88>, <89>;
++ clocks = <&coreclk 0>;
++ };
diff --git a/target/linux/mvebu/patches-4.9/202-mvebu_xp_add_pwm_properties_to_dtsi_files.patch b/target/linux/mvebu/patches-4.9/202-mvebu_xp_add_pwm_properties_to_dtsi_files.patch
new file mode 100644
index 0000000000..90e951e2d2
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/202-mvebu_xp_add_pwm_properties_to_dtsi_files.patch
@@ -0,0 +1,149 @@
+Add properties to the gpio nodes to allow them to be also used
+as pwm lines.
+
+Signed-off-by: Andrew Lunn <andrew@lunn.ch>
+---
+ arch/arm/boot/dts/armada-370.dtsi | 10 ++++++++--
+ arch/arm/boot/dts/armada-xp-mv78230.dtsi | 10 ++++++++--
+ arch/arm/boot/dts/armada-xp-mv78260.dtsi | 8 ++++++--
+ arch/arm/boot/dts/armada-xp-mv78460.dtsi | 10 ++++++++--
+ 4 files changed, 30 insertions(+), 8 deletions(-)
+
+--- a/arch/arm/boot/dts/armada-370.dtsi
++++ b/arch/arm/boot/dts/armada-370.dtsi
+@@ -144,24 +144,30 @@
+
+ gpio0: gpio@18100 {
+ compatible = "marvell,orion-gpio";
+- reg = <0x18100 0x40>;
++ reg = <0x18100 0x40>, <0x181c0 0x08>;
++ reg-names = "gpio", "pwm";
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
++ #pwm-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <82>, <83>, <84>, <85>;
++ clocks = <&coreclk 0>;
+ };
+
+ gpio1: gpio@18140 {
+ compatible = "marvell,orion-gpio";
+- reg = <0x18140 0x40>;
++ reg = <0x18140 0x40>, <0x181c8 0x08>;
++ reg-names = "gpio", "pwm";
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
++ #pwm-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <87>, <88>, <89>, <90>;
++ clocks = <&coreclk 0>;
+ };
+
+ gpio2: gpio@18180 {
+--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
++++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+@@ -203,24 +203,30 @@
+ internal-regs {
+ gpio0: gpio@18100 {
+ compatible = "marvell,orion-gpio";
+- reg = <0x18100 0x40>;
++ reg = <0x18100 0x40>, <0x181c0 0x08>;
++ reg-names = "gpio", "pwm";
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
++ #pwm-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <82>, <83>, <84>, <85>;
++ clocks = <&coreclk 0>;
+ };
+
+ gpio1: gpio@18140 {
+ compatible = "marvell,orion-gpio";
+- reg = <0x18140 0x40>;
++ reg = <0x18140 0x40>, <0x181c8 0x08>;
++ reg-names = "gpio", "pwm";
+ ngpios = <17>;
+ gpio-controller;
+ #gpio-cells = <2>;
++ #pwm-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <87>, <88>, <89>;
++ clocks = <&coreclk 0>;
+ };
+ };
+ };
+--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
++++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+@@ -286,24 +286,28 @@
+ internal-regs {
+ gpio0: gpio@18100 {
+ compatible = "marvell,orion-gpio";
+- reg = <0x18100 0x40>;
++ reg = <0x18100 0x40>, <0x181c0 0x08>;
++ reg-names = "gpio", "pwm";
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
++ #pwm-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <82>, <83>, <84>, <85>;
++ clocks = <&coreclk 0>;
+ };
+
+ gpio1: gpio@18140 {
+ compatible = "marvell,orion-gpio";
+- reg = <0x18140 0x40>;
++ reg = <0x18140 0x40>, <0x181c8 0x08>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <87>, <88>, <89>, <90>;
++ clocks = <&coreclk 0>;
+ };
+
+ gpio2: gpio@18180 {
+--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
++++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+@@ -324,24 +324,30 @@
+ internal-regs {
+ gpio0: gpio@18100 {
+ compatible = "marvell,orion-gpio";
+- reg = <0x18100 0x40>;
++ reg = <0x18100 0x40>, <0x181c0 0x08>;
++ reg-names = "gpio", "pwm";
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
++ #pwm-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <82>, <83>, <84>, <85>;
++ clocks = <&coreclk 0>;
+ };
+
+ gpio1: gpio@18140 {
+ compatible = "marvell,orion-gpio";
+- reg = <0x18140 0x40>;
++ reg = <0x18140 0x40>, <0x181c8 0x08>;
++ reg-names = "gpio", "pwm";
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
++ #pwm-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <87>, <88>, <89>, <90>;
++ clocks = <&coreclk 0>;
+ };
+
+ gpio2: gpio@18180 {
diff --git a/target/linux/mvebu/patches-4.9/203-arm_mvebu_enable_pwm_in_defconfig.patch b/target/linux/mvebu/patches-4.9/203-arm_mvebu_enable_pwm_in_defconfig.patch
new file mode 100644
index 0000000000..21eb24da22
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/203-arm_mvebu_enable_pwm_in_defconfig.patch
@@ -0,0 +1,18 @@
+Now that the gpio driver also supports PWM operation, enable
+the PWM framework in mvebu_v7_defconfig.
+
+Signed-off-by: Andrew Lunn <andrew@lunn.ch>
+---
+ arch/arm/configs/mvebu_v7_defconfig | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/arm/configs/mvebu_v7_defconfig
++++ b/arch/arm/configs/mvebu_v7_defconfig
+@@ -135,6 +135,7 @@ CONFIG_DMADEVICES=y
+ CONFIG_MV_XOR=y
+ # CONFIG_IOMMU_SUPPORT is not set
+ CONFIG_MEMORY=y
++CONFIG_PWM=y
+ CONFIG_EXT4_FS=y
+ CONFIG_ISO9660_FS=y
+ CONFIG_JOLIET=y
diff --git a/target/linux/mvebu/patches-4.9/204-mvebu_wrt1900ac_use_pwm-fan_rather_than_gpio-fan.patch b/target/linux/mvebu/patches-4.9/204-mvebu_wrt1900ac_use_pwm-fan_rather_than_gpio-fan.patch
new file mode 100644
index 0000000000..b46697b727
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/204-mvebu_wrt1900ac_use_pwm-fan_rather_than_gpio-fan.patch
@@ -0,0 +1,28 @@
+The mvebu gpio driver can also perform PWM on some pins. Us the
+pwm-fan driver to control the fan of the WRT1900AC, giving us fine
+grain control over its speed and hence noise.
+
+Signed-off-by: Andrew Lunn <andrew@lunn.ch>
+---
+ arch/arm/boot/dts/armada-xp-wrt1900ac.dts | 8 +++-----
+ 1 file changed, 3 insertions(+), 5 deletions(-)
+
+--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
++++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+@@ -416,13 +416,11 @@
+ };
+ };
+
+- gpio_fan {
++ pwm_fan {
+ /* SUNON HA4010V4-0000-C99 */
+- compatible = "gpio-fan";
+- gpios = <&gpio0 24 0>;
+
+- gpio-fan,speed-map = <0 0
+- 4500 1>;
++ compatible = "pwm-fan";
++ pwms = <&gpio0 24 4000 0>;
+ };
+
+ dsa@0 {
diff --git a/target/linux/mvebu/patches-4.9/205-armada-385-rd-mtd-partitions.patch b/target/linux/mvebu/patches-4.9/205-armada-385-rd-mtd-partitions.patch
new file mode 100644
index 0000000000..e75a5eebda
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/205-armada-385-rd-mtd-partitions.patch
@@ -0,0 +1,19 @@
+--- a/arch/arm/boot/dts/armada-388-rd.dts
++++ b/arch/arm/boot/dts/armada-388-rd.dts
+@@ -140,6 +140,16 @@
+ compatible = "st,m25p128", "jedec,spi-nor";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <108000000>;
++
++ partition@0 {
++ label = "uboot";
++ reg = <0 0x400000>;
++ };
++
++ partition@1 {
++ label = "firmware";
++ reg = <0x400000 0xc00000>;
++ };
+ };
+ };
+
diff --git a/target/linux/mvebu/patches-4.9/206-ARM-mvebu-385-ap-Add-partitions.patch b/target/linux/mvebu/patches-4.9/206-ARM-mvebu-385-ap-Add-partitions.patch
new file mode 100644
index 0000000000..b7af272360
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/206-ARM-mvebu-385-ap-Add-partitions.patch
@@ -0,0 +1,35 @@
+From 9861f93a59142a3131870df2521eb2deb73026d7 Mon Sep 17 00:00:00 2001
+From: Maxime Ripard <maxime.ripard@free-electrons.com>
+Date: Tue, 13 Jan 2015 11:14:09 +0100
+Subject: [PATCH 2/2] ARM: mvebu: 385-ap: Add partitions
+
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ arch/arm/boot/dts/armada-385-db-ap.dts | 15 +++++++++++++++
+ 1 file changed, 15 insertions(+)
+
+--- a/arch/arm/boot/dts/armada-385-db-ap.dts
++++ b/arch/arm/boot/dts/armada-385-db-ap.dts
+@@ -181,19 +181,19 @@
+ #size-cells = <1>;
+
+ partition@0 {
+- label = "U-Boot";
++ label = "u-boot";
+ reg = <0x00000000 0x00800000>;
+ read-only;
+ };
+
+ partition@800000 {
+- label = "uImage";
++ label = "kernel";
+ reg = <0x00800000 0x00400000>;
+ read-only;
+ };
+
+ partition@c00000 {
+- label = "Root";
++ label = "ubi";
+ reg = <0x00c00000 0x3f400000>;
+ };
+ };
diff --git a/target/linux/mvebu/patches-4.9/210-clearfog_switch_node.patch b/target/linux/mvebu/patches-4.9/210-clearfog_switch_node.patch
new file mode 100644
index 0000000000..022dc6f5de
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/210-clearfog_switch_node.patch
@@ -0,0 +1,21 @@
+--- a/arch/arm/boot/dts/armada-388-clearfog.dts
++++ b/arch/arm/boot/dts/armada-388-clearfog.dts
+@@ -406,6 +406,18 @@
+ };
+ };
+
++ mvsw61xx {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ compatible = "marvell,88e6176";
++ status = "okay";
++ reg = <0x4>;
++ is-indirect;
++
++ mii-bus = <&mdio>;
++ cpu-port-0 = <5>;
++ };
++
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&rear_button_pins>;
diff --git a/target/linux/mvebu/patches-4.9/220-ARM-dts-armada388-clearfog-add-SFP-module-support.patch b/target/linux/mvebu/patches-4.9/220-ARM-dts-armada388-clearfog-add-SFP-module-support.patch
new file mode 100644
index 0000000000..e7aa5c4cb7
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/220-ARM-dts-armada388-clearfog-add-SFP-module-support.patch
@@ -0,0 +1,84 @@
+From 63ff73593c2f5d3fc1cba479321d192caaca48aa Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@arm.linux.org.uk>
+Date: Sat, 12 Sep 2015 18:43:39 +0100
+Subject: [PATCH 738/744] ARM: dts: armada388-clearfog: add SFP module support
+
+Add SFP module support for Clearfog using the SFP phylink support.
+
+Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
+---
+ arch/arm/boot/dts/armada-388-clearfog.dts | 44 ++++++++-----------------------
+ 1 file changed, 11 insertions(+), 33 deletions(-)
+
+--- a/arch/arm/boot/dts/armada-388-clearfog.dts
++++ b/arch/arm/boot/dts/armada-388-clearfog.dts
+@@ -90,16 +90,12 @@
+ };
+
+ ethernet@34000 {
++ managed = "in-band-status";
+ phy-mode = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <3>;
+ bm,pool-short = <1>;
+ status = "okay";
+-
+- fixed-link {
+- speed = <1000>;
+- full-duplex;
+- };
+ };
+
+ i2c@11000 {
+@@ -183,34 +179,6 @@
+ output-low;
+ line-name = "m.2 devslp";
+ };
+- sfp_los {
+- /* SFP loss of signal */
+- gpio-hog;
+- gpios = <12 GPIO_ACTIVE_HIGH>;
+- input;
+- line-name = "sfp-los";
+- };
+- sfp_tx_fault {
+- /* SFP laser fault */
+- gpio-hog;
+- gpios = <13 GPIO_ACTIVE_HIGH>;
+- input;
+- line-name = "sfp-tx-fault";
+- };
+- sfp_tx_disable {
+- /* SFP transmit disable */
+- gpio-hog;
+- gpios = <14 GPIO_ACTIVE_HIGH>;
+- output-low;
+- line-name = "sfp-tx-disable";
+- };
+- sfp_mod_def0 {
+- /* SFP module present */
+- gpio-hog;
+- gpios = <15 GPIO_ACTIVE_LOW>;
+- input;
+- line-name = "sfp-mod-def0";
+- };
+ };
+
+ /* The MCP3021 is 100kHz clock only */
+@@ -350,6 +318,16 @@
+ };
+ };
+
++ sfp: sfp {
++ compatible = "sff,sfp";
++ i2c-bus = <&i2c1>;
++ los-gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
++ moddef0-gpio = <&expander0 15 GPIO_ACTIVE_LOW>;
++ sfp,ethernet = <&eth2>;
++ tx-disable-gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
++ tx-fault-gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
++ };
++
+ dsa@0 {
+ compatible = "marvell,dsa";
+ dsa,ethernet = <&eth1>;
diff --git a/target/linux/mvebu/patches-4.9/300-mvneta-tx-queue-workaround.patch b/target/linux/mvebu/patches-4.9/300-mvneta-tx-queue-workaround.patch
new file mode 100644
index 0000000000..4801c4a0de
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/300-mvneta-tx-queue-workaround.patch
@@ -0,0 +1,36 @@
+The hardware queue scheduling is apparently configured with fixed
+priorities, which creates a nasty fairness issue where traffic from one
+CPU can starve traffic from all other CPUs.
+
+Work around this issue by forcing all tx packets to go through one CPU,
+until this issue is fixed properly.
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+--- a/drivers/net/ethernet/marvell/mvneta.c
++++ b/drivers/net/ethernet/marvell/mvneta.c
+@@ -3835,6 +3835,16 @@ static int mvneta_ethtool_get_rxfh(struc
+ return 0;
+ }
+
++static u16 mvneta_select_queue(struct net_device *dev, struct sk_buff *skb,
++ void *accel_priv,
++ select_queue_fallback_t fallback)
++{
++ /* XXX: hardware queue scheduling is broken,
++ * use only one queue until it is fixed */
++ return 0;
++}
++
++
+ static const struct net_device_ops mvneta_netdev_ops = {
+ .ndo_open = mvneta_open,
+ .ndo_stop = mvneta_stop,
+@@ -3845,6 +3855,7 @@ static const struct net_device_ops mvnet
+ .ndo_fix_features = mvneta_fix_features,
+ .ndo_get_stats64 = mvneta_get_stats64,
+ .ndo_do_ioctl = mvneta_ioctl,
++ .ndo_select_queue = mvneta_select_queue,
+ };
+
+ const struct ethtool_ops mvneta_eth_tool_ops = {
diff --git a/target/linux/mvebu/patches-4.9/400-phy-provide-a-hook-for-link-up-link-down-events.patch b/target/linux/mvebu/patches-4.9/400-phy-provide-a-hook-for-link-up-link-down-events.patch
new file mode 100644
index 0000000000..3e30d4957c
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/400-phy-provide-a-hook-for-link-up-link-down-events.patch
@@ -0,0 +1,177 @@
+From: Russell King <rmk+kernel@arm.linux.org.uk>
+Date: Sun, 12 Feb 2017 17:27:17 +0100
+Subject: [PATCH] phy: provide a hook for link up/link down events
+
+Sometimes, we need to do additional work between the PHY coming up and
+marking the carrier present - for example, we may need to wait for the
+PHY to MAC link to finish negotiation. This changes phylib to provide
+a notification function pointer which avoids the built-in
+netif_carrier_on() and netif_carrier_off() functions.
+
+Standard ->adjust_link functionality is provided by hooking a helper
+into the new ->phy_link_change method.
+
+Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
+---
+
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -955,6 +955,16 @@ void phy_start(struct phy_device *phydev
+ }
+ EXPORT_SYMBOL(phy_start);
+
++static void phy_link_up(struct phy_device *phydev)
++{
++ phydev->phy_link_change(phydev, true, true);
++}
++
++static void phy_link_down(struct phy_device *phydev, bool do_carrier)
++{
++ phydev->phy_link_change(phydev, false, do_carrier);
++}
++
+ /**
+ * phy_state_machine - Handle the state machine
+ * @work: work_struct that describes the work to be done
+@@ -996,8 +1006,7 @@ void phy_state_machine(struct work_struc
+ /* If the link is down, give up on negotiation for now */
+ if (!phydev->link) {
+ phydev->state = PHY_NOLINK;
+- netif_carrier_off(phydev->attached_dev);
+- phydev->adjust_link(phydev->attached_dev);
++ phy_link_down(phydev, true);
+ break;
+ }
+
+@@ -1009,9 +1018,7 @@ void phy_state_machine(struct work_struc
+ /* If AN is done, we're running */
+ if (err > 0) {
+ phydev->state = PHY_RUNNING;
+- netif_carrier_on(phydev->attached_dev);
+- phydev->adjust_link(phydev->attached_dev);
+-
++ phy_link_up(phydev);
+ } else if (0 == phydev->link_timeout--)
+ needs_aneg = true;
+ break;
+@@ -1036,8 +1043,7 @@ void phy_state_machine(struct work_struc
+ }
+ }
+ phydev->state = PHY_RUNNING;
+- netif_carrier_on(phydev->attached_dev);
+- phydev->adjust_link(phydev->attached_dev);
++ phy_link_up(phydev);
+ }
+ break;
+ case PHY_FORCING:
+@@ -1047,13 +1053,12 @@ void phy_state_machine(struct work_struc
+
+ if (phydev->link) {
+ phydev->state = PHY_RUNNING;
+- netif_carrier_on(phydev->attached_dev);
++ phy_link_up(phydev);
+ } else {
+ if (0 == phydev->link_timeout--)
+ needs_aneg = true;
++ phy_link_down(phydev, false);
+ }
+-
+- phydev->adjust_link(phydev->attached_dev);
+ break;
+ case PHY_RUNNING:
+ /* Only register a CHANGE if we are polling and link changed
+@@ -1076,14 +1081,12 @@ void phy_state_machine(struct work_struc
+
+ if (phydev->link) {
+ phydev->state = PHY_RUNNING;
+- netif_carrier_on(phydev->attached_dev);
++ phy_link_up(phydev);
+ } else {
+ phydev->state = PHY_NOLINK;
+- netif_carrier_off(phydev->attached_dev);
++ phy_link_down(phydev, true);
+ }
+
+- phydev->adjust_link(phydev->attached_dev);
+-
+ if (phy_interrupt_is_valid(phydev))
+ err = phy_config_interrupt(phydev,
+ PHY_INTERRUPT_ENABLED);
+@@ -1091,8 +1094,7 @@ void phy_state_machine(struct work_struc
+ case PHY_HALTED:
+ if (phydev->link) {
+ phydev->link = 0;
+- netif_carrier_off(phydev->attached_dev);
+- phydev->adjust_link(phydev->attached_dev);
++ phy_link_down(phydev, true);
+ do_suspend = true;
+ }
+ break;
+@@ -1112,11 +1114,11 @@ void phy_state_machine(struct work_struc
+
+ if (phydev->link) {
+ phydev->state = PHY_RUNNING;
+- netif_carrier_on(phydev->attached_dev);
++ phy_link_up(phydev);
+ } else {
+ phydev->state = PHY_NOLINK;
++ phy_link_down(phydev, false);
+ }
+- phydev->adjust_link(phydev->attached_dev);
+ } else {
+ phydev->state = PHY_AN;
+ phydev->link_timeout = PHY_AN_TIMEOUT;
+@@ -1128,11 +1130,11 @@ void phy_state_machine(struct work_struc
+
+ if (phydev->link) {
+ phydev->state = PHY_RUNNING;
+- netif_carrier_on(phydev->attached_dev);
++ phy_link_up(phydev);
+ } else {
+ phydev->state = PHY_NOLINK;
++ phy_link_down(phydev, false);
+ }
+- phydev->adjust_link(phydev->attached_dev);
+ }
+ break;
+ }
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -645,6 +645,19 @@ struct phy_device *phy_find_first(struct
+ }
+ EXPORT_SYMBOL(phy_find_first);
+
++static void phy_link_change(struct phy_device *phydev, bool up, bool do_carrier)
++{
++ struct net_device *netdev = phydev->attached_dev;
++
++ if (do_carrier) {
++ if (up)
++ netif_carrier_on(netdev);
++ else
++ netif_carrier_off(netdev);
++ }
++ phydev->adjust_link(netdev);
++}
++
+ /**
+ * phy_prepare_link - prepares the PHY layer to monitor link status
+ * @phydev: target phy_device struct
+@@ -899,6 +912,7 @@ int phy_attach_direct(struct net_device
+ goto error;
+ }
+
++ phydev->phy_link_change = phy_link_change;
+ phydev->attached_dev = dev;
+ dev->phydev = phydev;
+
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -426,6 +426,7 @@ struct phy_device {
+
+ u8 mdix;
+
++ void (*phy_link_change)(struct phy_device *, bool up, bool do_carrier);
+ void (*adjust_link)(struct net_device *dev);
+ };
+ #define to_phy_device(d) container_of(to_mdio_device(d), \
diff --git a/target/linux/mvebu/patches-4.9/401-net-phy-move-phy-MMD-accessors-to-phy-core.c.patch b/target/linux/mvebu/patches-4.9/401-net-phy-move-phy-MMD-accessors-to-phy-core.c.patch
new file mode 100644
index 0000000000..970aec1d24
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/401-net-phy-move-phy-MMD-accessors-to-phy-core.c.patch
@@ -0,0 +1,292 @@
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Wed, 4 Jan 2017 10:46:43 +0000
+Subject: [PATCH] net: phy: move phy MMD accessors to phy-core.c
+
+Move the phy_(read|write)__mmd() helpers out of line, they will become
+our main MMD accessor functions, and so will be a little more complex.
+This complexity doesn't belong in an inline function. Also move the
+_indirect variants as well to keep like functionality together.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ create mode 100644 drivers/net/phy/phy-core.c
+
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -1,6 +1,7 @@
+ # Makefile for Linux PHY drivers and MDIO bus drivers
+
+-libphy-y := phy.o phy_device.o mdio_bus.o mdio_device.o
++libphy-y := phy.o phy_device.o mdio_bus.o mdio_device.o \
++ phy-core.o
+ libphy-$(CONFIG_SWPHY) += swphy.o
+
+ obj-$(CONFIG_MDIO_BOARDINFO) += mdio-boardinfo.o
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -1171,91 +1171,6 @@ void phy_mac_interrupt(struct phy_device
+ }
+ EXPORT_SYMBOL(phy_mac_interrupt);
+
+-static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad,
+- int addr)
+-{
+- /* Write the desired MMD Devad */
+- bus->write(bus, addr, MII_MMD_CTRL, devad);
+-
+- /* Write the desired MMD register address */
+- bus->write(bus, addr, MII_MMD_DATA, prtad);
+-
+- /* Select the Function : DATA with no post increment */
+- bus->write(bus, addr, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
+-}
+-
+-/**
+- * phy_read_mmd_indirect - reads data from the MMD registers
+- * @phydev: The PHY device bus
+- * @prtad: MMD Address
+- * @devad: MMD DEVAD
+- *
+- * Description: it reads data from the MMD registers (clause 22 to access to
+- * clause 45) of the specified phy address.
+- * To read these register we have:
+- * 1) Write reg 13 // DEVAD
+- * 2) Write reg 14 // MMD Address
+- * 3) Write reg 13 // MMD Data Command for MMD DEVAD
+- * 3) Read reg 14 // Read MMD data
+- */
+-int phy_read_mmd_indirect(struct phy_device *phydev, int prtad, int devad)
+-{
+- struct phy_driver *phydrv = phydev->drv;
+- int addr = phydev->mdio.addr;
+- int value = -1;
+-
+- if (!phydrv->read_mmd_indirect) {
+- struct mii_bus *bus = phydev->mdio.bus;
+-
+- mutex_lock(&bus->mdio_lock);
+- mmd_phy_indirect(bus, prtad, devad, addr);
+-
+- /* Read the content of the MMD's selected register */
+- value = bus->read(bus, addr, MII_MMD_DATA);
+- mutex_unlock(&bus->mdio_lock);
+- } else {
+- value = phydrv->read_mmd_indirect(phydev, prtad, devad, addr);
+- }
+- return value;
+-}
+-EXPORT_SYMBOL(phy_read_mmd_indirect);
+-
+-/**
+- * phy_write_mmd_indirect - writes data to the MMD registers
+- * @phydev: The PHY device
+- * @prtad: MMD Address
+- * @devad: MMD DEVAD
+- * @data: data to write in the MMD register
+- *
+- * Description: Write data from the MMD registers of the specified
+- * phy address.
+- * To write these register we have:
+- * 1) Write reg 13 // DEVAD
+- * 2) Write reg 14 // MMD Address
+- * 3) Write reg 13 // MMD Data Command for MMD DEVAD
+- * 3) Write reg 14 // Write MMD data
+- */
+-void phy_write_mmd_indirect(struct phy_device *phydev, int prtad,
+- int devad, u32 data)
+-{
+- struct phy_driver *phydrv = phydev->drv;
+- int addr = phydev->mdio.addr;
+-
+- if (!phydrv->write_mmd_indirect) {
+- struct mii_bus *bus = phydev->mdio.bus;
+-
+- mutex_lock(&bus->mdio_lock);
+- mmd_phy_indirect(bus, prtad, devad, addr);
+-
+- /* Write the data into MMD's selected register */
+- bus->write(bus, addr, MII_MMD_DATA, data);
+- mutex_unlock(&bus->mdio_lock);
+- } else {
+- phydrv->write_mmd_indirect(phydev, prtad, devad, addr, data);
+- }
+-}
+-EXPORT_SYMBOL(phy_write_mmd_indirect);
+-
+ /**
+ * phy_init_eee - init and check the EEE feature
+ * @phydev: target phy_device struct
+--- /dev/null
++++ b/drivers/net/phy/phy-core.c
+@@ -0,0 +1,135 @@
++/*
++ * Core PHY library, taken from phy.c
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ */
++#include <linux/export.h>
++#include <linux/phy.h>
++
++static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad,
++ int addr)
++{
++ /* Write the desired MMD Devad */
++ bus->write(bus, addr, MII_MMD_CTRL, devad);
++
++ /* Write the desired MMD register address */
++ bus->write(bus, addr, MII_MMD_DATA, prtad);
++
++ /* Select the Function : DATA with no post increment */
++ bus->write(bus, addr, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
++}
++
++/**
++ * phy_read_mmd_indirect - reads data from the MMD registers
++ * @phydev: The PHY device bus
++ * @prtad: MMD Address
++ * @devad: MMD DEVAD
++ *
++ * Description: it reads data from the MMD registers (clause 22 to access to
++ * clause 45) of the specified phy address.
++ * To read these register we have:
++ * 1) Write reg 13 // DEVAD
++ * 2) Write reg 14 // MMD Address
++ * 3) Write reg 13 // MMD Data Command for MMD DEVAD
++ * 3) Read reg 14 // Read MMD data
++ */
++int phy_read_mmd_indirect(struct phy_device *phydev, int prtad, int devad)
++{
++ struct phy_driver *phydrv = phydev->drv;
++ int addr = phydev->mdio.addr;
++ int value = -1;
++
++ if (!phydrv->read_mmd_indirect) {
++ struct mii_bus *bus = phydev->mdio.bus;
++
++ mutex_lock(&bus->mdio_lock);
++ mmd_phy_indirect(bus, prtad, devad, addr);
++
++ /* Read the content of the MMD's selected register */
++ value = bus->read(bus, addr, MII_MMD_DATA);
++ mutex_unlock(&bus->mdio_lock);
++ } else {
++ value = phydrv->read_mmd_indirect(phydev, prtad, devad, addr);
++ }
++ return value;
++}
++EXPORT_SYMBOL(phy_read_mmd_indirect);
++
++/**
++ * phy_read_mmd - Convenience function for reading a register
++ * from an MMD on a given PHY.
++ * @phydev: The phy_device struct
++ * @devad: The MMD to read from
++ * @regnum: The register on the MMD to read
++ *
++ * Same rules as for phy_read();
++ */
++int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
++{
++ if (!phydev->is_c45)
++ return -EOPNOTSUPP;
++
++ return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr,
++ MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff));
++}
++EXPORT_SYMBOL(phy_read_mmd);
++
++/**
++ * phy_write_mmd_indirect - writes data to the MMD registers
++ * @phydev: The PHY device
++ * @prtad: MMD Address
++ * @devad: MMD DEVAD
++ * @data: data to write in the MMD register
++ *
++ * Description: Write data from the MMD registers of the specified
++ * phy address.
++ * To write these register we have:
++ * 1) Write reg 13 // DEVAD
++ * 2) Write reg 14 // MMD Address
++ * 3) Write reg 13 // MMD Data Command for MMD DEVAD
++ * 3) Write reg 14 // Write MMD data
++ */
++void phy_write_mmd_indirect(struct phy_device *phydev, int prtad,
++ int devad, u32 data)
++{
++ struct phy_driver *phydrv = phydev->drv;
++ int addr = phydev->mdio.addr;
++
++ if (!phydrv->write_mmd_indirect) {
++ struct mii_bus *bus = phydev->mdio.bus;
++
++ mutex_lock(&bus->mdio_lock);
++ mmd_phy_indirect(bus, prtad, devad, addr);
++
++ /* Write the data into MMD's selected register */
++ bus->write(bus, addr, MII_MMD_DATA, data);
++ mutex_unlock(&bus->mdio_lock);
++ } else {
++ phydrv->write_mmd_indirect(phydev, prtad, devad, addr, data);
++ }
++}
++EXPORT_SYMBOL(phy_write_mmd_indirect);
++
++/**
++ * phy_write_mmd - Convenience function for writing a register
++ * on an MMD on a given PHY.
++ * @phydev: The phy_device struct
++ * @devad: The MMD to read from
++ * @regnum: The register on the MMD to read
++ * @val: value to write to @regnum
++ *
++ * Same rules as for phy_write();
++ */
++int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
++{
++ if (!phydev->is_c45)
++ return -EOPNOTSUPP;
++
++ regnum = MII_ADDR_C45 | ((devad & 0x1f) << 16) | (regnum & 0xffff);
++
++ return mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, regnum, val);
++}
++EXPORT_SYMBOL(phy_write_mmd);
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -627,14 +627,7 @@ struct phy_fixup {
+ *
+ * Same rules as for phy_read();
+ */
+-static inline int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
+-{
+- if (!phydev->is_c45)
+- return -EOPNOTSUPP;
+-
+- return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr,
+- MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff));
+-}
++int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum);
+
+ /**
+ * phy_read_mmd_indirect - reads data from the MMD registers
+@@ -728,16 +721,7 @@ static inline bool phy_is_pseudo_fixed_l
+ *
+ * Same rules as for phy_write();
+ */
+-static inline int phy_write_mmd(struct phy_device *phydev, int devad,
+- u32 regnum, u16 val)
+-{
+- if (!phydev->is_c45)
+- return -EOPNOTSUPP;
+-
+- regnum = MII_ADDR_C45 | ((devad & 0x1f) << 16) | (regnum & 0xffff);
+-
+- return mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, regnum, val);
+-}
++int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val);
+
+ /**
+ * phy_write_mmd_indirect - writes data to the MMD registers
diff --git a/target/linux/mvebu/patches-4.9/402-net-phy-make-phy_-read-write-_mmd-generic-MMD-access.patch b/target/linux/mvebu/patches-4.9/402-net-phy-make-phy_-read-write-_mmd-generic-MMD-access.patch
new file mode 100644
index 0000000000..a37b0a7527
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/402-net-phy-make-phy_-read-write-_mmd-generic-MMD-access.patch
@@ -0,0 +1,97 @@
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Wed, 4 Jan 2017 19:20:21 +0000
+Subject: [PATCH] net: phy: make phy_(read|write)_mmd() generic MMD
+ accessors
+
+Make phy_(read|write)_mmd() generic 802.3 clause 45 register accessors
+for both Clause 22 and Clause 45 PHYs, using either the direct register
+reading for Clause 45, or the indirect method for Clause 22 PHYs.
+Allow this behaviour to be overriden by PHY drivers where necessary.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+
+--- a/drivers/net/phy/phy-core.c
++++ b/drivers/net/phy/phy-core.c
+@@ -69,11 +69,18 @@ EXPORT_SYMBOL(phy_read_mmd_indirect);
+ */
+ int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
+ {
+- if (!phydev->is_c45)
+- return -EOPNOTSUPP;
++ if (regnum > (u16)~0 || devad > 32)
++ return -EINVAL;
+
+- return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr,
+- MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff));
++ if (phydev->drv->read_mmd)
++ return phydev->drv->read_mmd(phydev, devad, regnum);
++
++ if (phydev->is_c45) {
++ u32 addr = MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff);
++ return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, addr);
++ }
++
++ return phy_read_mmd_indirect(phydev, regnum, devad);
+ }
+ EXPORT_SYMBOL(phy_read_mmd);
+
+@@ -125,11 +132,21 @@ EXPORT_SYMBOL(phy_write_mmd_indirect);
+ */
+ int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
+ {
+- if (!phydev->is_c45)
+- return -EOPNOTSUPP;
++ if (regnum > (u16)~0 || devad > 32)
++ return -EINVAL;
++
++ if (phydev->drv->read_mmd)
++ return phydev->drv->write_mmd(phydev, devad, regnum, val);
++
++ if (phydev->is_c45) {
++ u32 addr = MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff);
++
++ return mdiobus_write(phydev->mdio.bus, phydev->mdio.addr,
++ addr, val);
++ }
+
+- regnum = MII_ADDR_C45 | ((devad & 0x1f) << 16) | (regnum & 0xffff);
++ phy_write_mmd_indirect(phydev, regnum, devad, val);
+
+- return mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, regnum, val);
++ return 0;
+ }
+ EXPORT_SYMBOL(phy_write_mmd);
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -570,6 +570,30 @@ struct phy_driver {
+ */
+ void (*link_change_notify)(struct phy_device *dev);
+
++ /*
++ * Phy specific driver override for reading a MMD register.
++ * This function is optional for PHY specific drivers. When
++ * not provided, the default MMD read function will be used
++ * by phy_read_mmd(), which will use either a direct read for
++ * Clause 45 PHYs or an indirect read for Clause 22 PHYs.
++ * devnum is the MMD device number within the PHY device,
++ * regnum is the register within the selected MMD device.
++ */
++ int (*read_mmd)(struct phy_device *dev, int devnum, u16 regnum);
++
++ /*
++ * Phy specific driver override for writing a MMD register.
++ * This function is optional for PHY specific drivers. When
++ * not provided, the default MMD write function will be used
++ * by phy_write_mmd(), which will use either a direct write for
++ * Clause 45 PHYs, or an indirect write for Clause 22 PHYs.
++ * devnum is the MMD device number within the PHY device,
++ * regnum is the register within the selected MMD device.
++ * val is the value to be written.
++ */
++ int (*write_mmd)(struct phy_device *dev, int devnum, u16 regnum,
++ u16 val);
++
+ /* A function provided by a phy specific driver to override the
+ * the PHY driver framework support for reading a MMD register
+ * from the PHY. If not supported, return -1. This function is
diff --git a/target/linux/mvebu/patches-4.9/403-net-phy-avoid-setting-unsupported-EEE-advertisments.patch b/target/linux/mvebu/patches-4.9/403-net-phy-avoid-setting-unsupported-EEE-advertisments.patch
new file mode 100644
index 0000000000..35479007d0
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/403-net-phy-avoid-setting-unsupported-EEE-advertisments.patch
@@ -0,0 +1,52 @@
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Wed, 4 Jan 2017 21:00:51 +0000
+Subject: [PATCH] net: phy: avoid setting unsupported EEE advertisments
+
+We currently allow userspace to set any EEE advertisments it desires,
+whether or not the PHY supports them. For example:
+
+ # ethtool --set-eee eth1 advertise 0xffffffff
+ # ethtool --show-eee eth1
+ EEE Settings for eth1:
+ EEE status: disabled
+ Tx LPI: disabled
+ Supported EEE link modes: 100baseT/Full
+ 1000baseT/Full
+ 10000baseT/Full
+ Advertised EEE link modes: 100baseT/Full
+ 1000baseT/Full
+ 1000baseKX/Full
+ 10000baseT/Full
+ 10000baseKX4/Full
+ 10000baseKR/Full
+
+Clearly, this is not sane, we should only allow link modes that are
+supported to be advertised (as we do elsewhere.) Ensure that we mask
+the MDIO_AN_EEE_ADV value with the capabilities retrieved from the
+MDIO_PCS_EEE_ABLE register.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -1307,11 +1307,16 @@ EXPORT_SYMBOL(phy_ethtool_get_eee);
+ */
+ int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
+ {
+- int val = ethtool_adv_to_mmd_eee_adv_t(data->advertised);
++ int cap, adv;
+
+- phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN, val);
++ /* Get Supported EEE */
++ cap = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE);
++ if (cap < 0)
++ return cap;
+
+- return 0;
++ adv = ethtool_adv_to_mmd_eee_adv_t(data->advertised) & cap;
++
++ return phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, adv);
+ }
+ EXPORT_SYMBOL(phy_ethtool_set_eee);
+
diff --git a/target/linux/mvebu/patches-4.9/404-net-phy-restart-phy-autonegotiation-after-EEE-advert.patch b/target/linux/mvebu/patches-4.9/404-net-phy-restart-phy-autonegotiation-after-EEE-advert.patch
new file mode 100644
index 0000000000..5290e71408
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/404-net-phy-restart-phy-autonegotiation-after-EEE-advert.patch
@@ -0,0 +1,50 @@
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Thu, 5 Jan 2017 12:21:09 +0000
+Subject: [PATCH] net: phy: restart phy autonegotiation after EEE
+ advertisment change
+
+When the EEE advertisment is changed, we should restart autonegotiation
+to update the link partner with the new EEE settings. Add this trigger
+but only if the advertisment has changed.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -1307,16 +1307,33 @@ EXPORT_SYMBOL(phy_ethtool_get_eee);
+ */
+ int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
+ {
+- int cap, adv;
++ int cap, old_adv, adv, ret;
+
+ /* Get Supported EEE */
+ cap = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE);
+ if (cap < 0)
+ return cap;
+
++ old_adv = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV);
++ if (old_adv < 0)
++ return old_adv;
++
+ adv = ethtool_adv_to_mmd_eee_adv_t(data->advertised) & cap;
+
+- return phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, adv);
++ if (old_adv != adv) {
++ ret = phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, adv);
++ if (ret < 0)
++ return ret;
++
++ /* Restart autonegotiation so the new modes get sent to the
++ * link partner.
++ */
++ ret = phy_restart_aneg(phydev);
++ if (ret < 0)
++ return ret;
++ }
++
++ return 0;
+ }
+ EXPORT_SYMBOL(phy_ethtool_set_eee);
+
diff --git a/target/linux/mvebu/patches-4.9/405-net-phy-allow-EEE-with-SGMII-interface-modes.patch b/target/linux/mvebu/patches-4.9/405-net-phy-allow-EEE-with-SGMII-interface-modes.patch
new file mode 100644
index 0000000000..db7b00404f
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/405-net-phy-allow-EEE-with-SGMII-interface-modes.patch
@@ -0,0 +1,21 @@
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Thu, 5 Jan 2017 09:34:42 +0000
+Subject: [PATCH] net: phy: allow EEE with SGMII interface modes
+
+As EEE is able to work in SGMII mode as well, add it to the list of
+permissable EEE modes that phy_init_eee() will accept. This is
+necessary so that EEE can work with an 88E1512 connected in SGMII mode.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -1191,6 +1191,7 @@ int phy_init_eee(struct phy_device *phyd
+ if ((phydev->duplex == DUPLEX_FULL) &&
+ ((phydev->interface == PHY_INTERFACE_MODE_MII) ||
+ (phydev->interface == PHY_INTERFACE_MODE_GMII) ||
++ phydev->interface == PHY_INTERFACE_MODE_SGMII ||
+ phy_interface_is_rgmii(phydev) ||
+ phy_is_internal(phydev))) {
+ int eee_lp, eee_cap, eee_adv;
diff --git a/target/linux/mvebu/patches-4.9/406-net-phy-improve-phylib-correctness-for-non-autoneg-s.patch b/target/linux/mvebu/patches-4.9/406-net-phy-improve-phylib-correctness-for-non-autoneg-s.patch
new file mode 100644
index 0000000000..16516c6846
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/406-net-phy-improve-phylib-correctness-for-non-autoneg-s.patch
@@ -0,0 +1,199 @@
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Thu, 5 Jan 2017 16:32:14 +0000
+Subject: [PATCH] net: phy: improve phylib correctness for non-autoneg
+ settings
+
+phylib has some undesirable behaviour when forcing a link mode through
+ethtool. phylib uses this code:
+
+ idx = phy_find_valid(phy_find_setting(phydev->speed, phydev->duplex),
+ features);
+
+to find an index in the settings table. phy_find_setting() starts at
+index 0, and scans upwards looking for an exact speed and duplex match.
+When it doesn't find it, it returns MAX_NUM_SETTINGS - 1, which is
+10baseT-Half duplex.
+
+phy_find_valid() then scans from the point (and effectively only checks
+one entry) before bailing out, returning MAX_NUM_SETTINGS - 1.
+
+phy_sanitize_settings() then sets ->speed to SPEED_10 and ->duplex to
+DUPLEX_HALF whether or not 10baseT-Half is supported or not. This goes
+against all the comments against these functions, and 10baseT-Half may
+not even be supported by the hardware.
+
+Rework these functions, introducing a new method of scanning the table.
+There are two modes of lookup that phylib wants: exact, and inexact.
+
+- in exact mode, we return either an exact match or failure
+- in inexact mode, we return an exact match if it exists, a match at
+ the highest speed that is not greater than the requested speed
+ (ignoring duplex), or failing that, the lowest supported speed, or
+ failure.
+
+The biggest difference is that we always check whether the entry is
+supported before further consideration, so all unsupported entries are
+not considered as candidates.
+
+This results in arguably saner behaviour, better matches the comments,
+and is probably what users would expect.
+
+This becomes important as ethernet speeds increase, PHYs exist which do
+not support the 10Mbit speeds, and half-duplex is likely to become
+obsolete - it's already not even an option on 10Gbit and faster links.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -160,7 +160,9 @@ struct phy_setting {
+ u32 setting;
+ };
+
+-/* A mapping of all SUPPORTED settings to speed/duplex */
++/* A mapping of all SUPPORTED settings to speed/duplex. This table
++ * must be grouped by speed and sorted in descending match priority
++ * - iow, descending speed. */
+ static const struct phy_setting settings[] = {
+ {
+ .speed = SPEED_10000,
+@@ -219,45 +221,70 @@ static const struct phy_setting settings
+ },
+ };
+
+-#define MAX_NUM_SETTINGS ARRAY_SIZE(settings)
+-
+ /**
+- * phy_find_setting - find a PHY settings array entry that matches speed & duplex
++ * phy_lookup_setting - lookup a PHY setting
+ * @speed: speed to match
+ * @duplex: duplex to match
++ * @feature: allowed link modes
++ * @exact: an exact match is required
++ *
++ * Search the settings array for a setting that matches the speed and
++ * duplex, and which is supported.
++ *
++ * If @exact is unset, either an exact match or %NULL for no match will
++ * be returned.
+ *
+- * Description: Searches the settings array for the setting which
+- * matches the desired speed and duplex, and returns the index
+- * of that setting. Returns the index of the last setting if
+- * none of the others match.
++ * If @exact is set, an exact match, the fastest supported setting at
++ * or below the specified speed, the slowest supported setting, or if
++ * they all fail, %NULL will be returned.
+ */
+-static inline unsigned int phy_find_setting(int speed, int duplex)
++static const struct phy_setting *
++phy_lookup_setting(int speed, int duplex, u32 features, bool exact)
+ {
+- unsigned int idx = 0;
++ const struct phy_setting *p, *match = NULL, *last = NULL;
++ int i;
+
+- while (idx < ARRAY_SIZE(settings) &&
+- (settings[idx].speed != speed || settings[idx].duplex != duplex))
+- idx++;
++ for (i = 0, p = settings; i < ARRAY_SIZE(settings); i++, p++) {
++ if (p->setting & features) {
++ last = p;
++ if (p->speed == speed && p->duplex == duplex) {
++ /* Exact match for speed and duplex */
++ match = p;
++ break;
++ } else if (!exact) {
++ if (!match && p->speed <= speed)
++ /* Candidate */
++ match = p;
++
++ if (p->speed < speed)
++ break;
++ }
++ }
++ }
+
+- return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1;
++ if (!match && !exact)
++ match = last;
++
++ return match;
+ }
+
+ /**
+- * phy_find_valid - find a PHY setting that matches the requested features mask
+- * @idx: The first index in settings[] to search
+- * @features: A mask of the valid settings
++ * phy_find_valid - find a PHY setting that matches the requested parameters
++ * @speed: desired speed
++ * @duplex: desired duplex
++ * @supported: mask of supported link modes
+ *
+- * Description: Returns the index of the first valid setting less
+- * than or equal to the one pointed to by idx, as determined by
+- * the mask in features. Returns the index of the last setting
+- * if nothing else matches.
++ * Locate a supported phy setting that is, in priority order:
++ * - an exact match for the specified speed and duplex mode
++ * - a match for the specified speed, or slower speed
++ * - the slowest supported speed
++ * Returns the matched phy_setting entry, or %NULL if no supported phy
++ * settings were found.
+ */
+-static inline unsigned int phy_find_valid(unsigned int idx, u32 features)
++static const struct phy_setting *
++phy_find_valid(int speed, int duplex, u32 supported)
+ {
+- while (idx < MAX_NUM_SETTINGS && !(settings[idx].setting & features))
+- idx++;
+-
+- return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1;
++ return phy_lookup_setting(speed, duplex, supported, false);
+ }
+
+ /**
+@@ -271,12 +298,7 @@ static inline unsigned int phy_find_vali
+ */
+ static inline bool phy_check_valid(int speed, int duplex, u32 features)
+ {
+- unsigned int idx;
+-
+- idx = phy_find_valid(phy_find_setting(speed, duplex), features);
+-
+- return settings[idx].speed == speed && settings[idx].duplex == duplex &&
+- (settings[idx].setting & features);
++ return !!phy_lookup_setting(speed, duplex, features, true);
+ }
+
+ /**
+@@ -289,18 +311,22 @@ static inline bool phy_check_valid(int s
+ */
+ static void phy_sanitize_settings(struct phy_device *phydev)
+ {
++ const struct phy_setting *setting;
+ u32 features = phydev->supported;
+- unsigned int idx;
+
+ /* Sanitize settings based on PHY capabilities */
+ if ((features & SUPPORTED_Autoneg) == 0)
+ phydev->autoneg = AUTONEG_DISABLE;
+
+- idx = phy_find_valid(phy_find_setting(phydev->speed, phydev->duplex),
+- features);
+-
+- phydev->speed = settings[idx].speed;
+- phydev->duplex = settings[idx].duplex;
++ setting = phy_find_valid(phydev->speed, phydev->duplex, features);
++ if (setting) {
++ phydev->speed = setting->speed;
++ phydev->duplex = setting->duplex;
++ } else {
++ /* We failed to find anything (no supported speeds?) */
++ phydev->speed = SPEED_UNKNOWN;
++ phydev->duplex = DUPLEX_UNKNOWN;
++ }
+ }
+
+ /**
diff --git a/target/linux/mvebu/patches-4.9/407-net-phy-add-802.3-clause-45-support-to-phylib.patch b/target/linux/mvebu/patches-4.9/407-net-phy-add-802.3-clause-45-support-to-phylib.patch
new file mode 100644
index 0000000000..8e983cc7ff
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/407-net-phy-add-802.3-clause-45-support-to-phylib.patch
@@ -0,0 +1,323 @@
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Thu, 29 Dec 2016 11:03:09 +0000
+Subject: [PATCH] net: phy: add 802.3 clause 45 support to phylib
+
+Add generic helpers for 802.3 clause 45 PHYs for >= 10Gbps support.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ create mode 100644 drivers/net/phy/phy-c45.c
+
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -1,7 +1,7 @@
+ # Makefile for Linux PHY drivers and MDIO bus drivers
+
+ libphy-y := phy.o phy_device.o mdio_bus.o mdio_device.o \
+- phy-core.o
++ phy-c45.o phy-core.o
+ libphy-$(CONFIG_SWPHY) += swphy.o
+
+ obj-$(CONFIG_MDIO_BOARDINFO) += mdio-boardinfo.o
+--- /dev/null
++++ b/drivers/net/phy/phy-c45.c
+@@ -0,0 +1,234 @@
++/*
++ * Clause 45 PHY support
++ */
++#include <linux/ethtool.h>
++#include <linux/export.h>
++#include <linux/mdio.h>
++#include <linux/mii.h>
++#include <linux/phy.h>
++
++/**
++ * genphy_c45_setup_forced - configures a forced speed
++ * @phydev: target phy_device struct
++ */
++int genphy_c45_pma_setup_forced(struct phy_device *phydev)
++{
++ int ctrl1, ctrl2, ret;
++
++ /* Half duplex is not supported */
++ if (phydev->duplex != DUPLEX_FULL)
++ return -EINVAL;
++
++ ctrl1 = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1);
++ if (ctrl1 < 0)
++ return ctrl1;
++
++ ctrl2 = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL2);
++ if (ctrl2 < 0)
++ return ctrl2;
++
++ ctrl1 &= ~MDIO_CTRL1_SPEEDSEL;
++ /* PMA/PMD type selection is 1.7.5:0 not 1.7.3:0. See 45.2.1.6.1. */
++ ctrl2 &= ~(MDIO_PMA_CTRL2_TYPE | 0x30);
++
++ switch (phydev->speed) {
++ case SPEED_10:
++ ctrl2 |= MDIO_PMA_CTRL2_10BT;
++ break;
++ case SPEED_100:
++ ctrl1 |= MDIO_PMA_CTRL1_SPEED100;
++ ctrl2 |= MDIO_PMA_CTRL2_100BTX;
++ break;
++ case SPEED_1000:
++ ctrl1 |= MDIO_PMA_CTRL1_SPEED1000;
++ /* Assume 1000base-T */
++ ctrl2 |= MDIO_PMA_CTRL2_1000BT;
++ break;
++ case SPEED_10000:
++ ctrl1 |= MDIO_CTRL1_SPEED10G;
++ /* Assume 10Gbase-T */
++ ctrl2 |= MDIO_PMA_CTRL2_10GBT;
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1, ctrl1);
++ if (ret < 0)
++ return ret;
++
++ return phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL2, ctrl2);
++}
++EXPORT_SYMBOL_GPL(genphy_c45_pma_setup_forced);
++
++/**
++ * genphy_c45_an_disable_aneg - disable auto-negotiation
++ * @phydev: target phy_device struct
++ *
++ * Disable auto-negotiation in the Clause 45 PHY. The link parameters
++ * parameters are controlled through the PMA/PMD MMD registers.
++ *
++ * Returns zero on success, negative errno code on failure.
++ */
++int genphy_c45_an_disable_aneg(struct phy_device *phydev)
++{
++ int val;
++
++ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1);
++ if (val < 0)
++ return val;
++
++ val &= ~(MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART);
++
++ return phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, val);
++}
++EXPORT_SYMBOL_GPL(genphy_c45_an_disable_aneg);
++
++/**
++ * genphy_c45_restart_aneg - Enable and restart auto-negotiation
++ * @phydev: target phy_device struct
++ *
++ * This assumes that the auto-negotiation MMD is present.
++ *
++ * Enable and restart auto-negotiation.
++ */
++int genphy_c45_restart_aneg(struct phy_device *phydev)
++{
++ int val;
++
++ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1);
++ if (val < 0)
++ return val;
++
++ val |= MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART;
++
++ return phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, val);
++}
++EXPORT_SYMBOL_GPL(genphy_c45_restart_aneg);
++
++/**
++ * genphy_c45_aneg_done - return auto-negotiation complete status
++ * @phydev: target phy_device struct
++ *
++ * This assumes that the auto-negotiation MMD is present.
++ *
++ * Reads the status register from the auto-negotiation MMD, returning:
++ * - positive if auto-negotiation is complete
++ * - negative errno code on error
++ * - zero otherwise
++ */
++int genphy_c45_aneg_done(struct phy_device *phydev)
++{
++ int val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
++
++ return val < 0 ? val : val & MDIO_AN_STAT1_COMPLETE ? 1 : 0;
++}
++EXPORT_SYMBOL_GPL(genphy_c45_aneg_done);
++
++/**
++ * genphy_c45_read_link - read the overall link status from the MMDs
++ * @phydev: target phy_device struct
++ * @mmd_mask: MMDs to read status from
++ *
++ * Read the link status from the specified MMDs, and if they all indicate
++ * that the link is up, return positive. If an error is encountered,
++ * a negative errno will be returned, otherwise zero.
++ */
++int genphy_c45_read_link(struct phy_device *phydev, u32 mmd_mask)
++{
++ int val, devad;
++ bool link = true;
++
++ while (mmd_mask) {
++ devad = __ffs(mmd_mask);
++ mmd_mask &= ~BIT(devad);
++
++ val = phy_read_mmd(phydev, devad, MDIO_STAT1);
++ if (val < 0)
++ return val;
++
++ /* Read twice because link state is latched and a
++ * read moves the current state into the register
++ */
++ val = phy_read_mmd(phydev, devad, MDIO_STAT1);
++ if (val < 0)
++ return val;
++
++ if (!(val & MDIO_STAT1_LSTATUS))
++ link = false;
++ }
++
++ return link;
++}
++EXPORT_SYMBOL_GPL(genphy_c45_read_link);
++
++/**
++ * genphy_c45_read_lpa - read the link partner advertisment and pause
++ * @phydev: target phy_device struct
++ *
++ * Read the Clause 45 defined base (7.19) and 10G (7.33) status registers,
++ * filling in the link partner advertisment, pause and asym_pause members
++ * in @phydev. This assumes that the auto-negotiation MMD is present, and
++ * the backplane bit (7.48.0) is clear. Clause 45 PHY drivers are expected
++ * to fill in the remainder of the link partner advert from vendor registers.
++ */
++int genphy_c45_read_lpa(struct phy_device *phydev)
++{
++ int val;
++
++ /* Read the link partner's base page advertisment */
++ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA);
++ if (val < 0)
++ return val;
++
++ phydev->lp_advertising = mii_lpa_to_ethtool_lpa_t(val);
++ phydev->pause = val & LPA_PAUSE_CAP ? 1 : 0;
++ phydev->asym_pause = val & LPA_PAUSE_ASYM ? 1 : 0;
++
++ /* Read the link partner's 10G advertisment */
++ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_STAT);
++ if (val < 0)
++ return val;
++
++ if (val & MDIO_AN_10GBT_STAT_LP10G)
++ phydev->lp_advertising |= ADVERTISED_10000baseT_Full;
++
++ return 0;
++}
++EXPORT_SYMBOL_GPL(genphy_c45_read_lpa);
++
++/**
++ * genphy_c45_read_pma - read link speed etc from PMA
++ * @phydev: target phy_device struct
++ */
++int genphy_c45_read_pma(struct phy_device *phydev)
++{
++ int val;
++
++ val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1);
++ if (val < 0)
++ return val;
++
++ switch (val & MDIO_CTRL1_SPEEDSEL) {
++ case 0:
++ phydev->speed = SPEED_10;
++ break;
++ case MDIO_PMA_CTRL1_SPEED100:
++ phydev->speed = SPEED_100;
++ break;
++ case MDIO_PMA_CTRL1_SPEED1000:
++ phydev->speed = SPEED_1000;
++ break;
++ case MDIO_CTRL1_SPEED10G:
++ phydev->speed = SPEED_10000;
++ break;
++ default:
++ phydev->speed = SPEED_UNKNOWN;
++ break;
++ }
++
++ phydev->duplex = DUPLEX_FULL;
++
++ return 0;
++}
++EXPORT_SYMBOL_GPL(genphy_c45_read_pma);
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -1390,27 +1390,19 @@ EXPORT_SYMBOL(genphy_read_status);
+
+ static int gen10g_read_status(struct phy_device *phydev)
+ {
+- int devad, reg;
+ u32 mmd_mask = phydev->c45_ids.devices_in_package;
+-
+- phydev->link = 1;
++ int ret;
+
+ /* For now just lie and say it's 10G all the time */
+ phydev->speed = SPEED_10000;
+ phydev->duplex = DUPLEX_FULL;
+
+- for (devad = 0; mmd_mask; devad++, mmd_mask = mmd_mask >> 1) {
+- if (!(mmd_mask & 1))
+- continue;
+-
+- /* Read twice because link state is latched and a
+- * read moves the current state into the register
+- */
+- phy_read_mmd(phydev, devad, MDIO_STAT1);
+- reg = phy_read_mmd(phydev, devad, MDIO_STAT1);
+- if (reg < 0 || !(reg & MDIO_STAT1_LSTATUS))
+- phydev->link = 0;
+- }
++ /* Avoid reading the vendor MMDs */
++ mmd_mask &= ~(BIT(MDIO_MMD_VEND1) | BIT(MDIO_MMD_VEND2));
++
++ ret = genphy_c45_read_link(phydev, mmd_mask);
++
++ phydev->link = ret > 0 ? 1 : 0;
+
+ return 0;
+ }
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -807,6 +807,8 @@ static inline const char *phydev_name(co
+ void phy_attached_print(struct phy_device *phydev, const char *fmt, ...)
+ __printf(2, 3);
+ void phy_attached_info(struct phy_device *phydev);
++
++/* Clause 22 PHY */
+ int genphy_config_init(struct phy_device *phydev);
+ int genphy_setup_forced(struct phy_device *phydev);
+ int genphy_restart_aneg(struct phy_device *phydev);
+@@ -817,6 +819,16 @@ int genphy_read_status(struct phy_device
+ int genphy_suspend(struct phy_device *phydev);
+ int genphy_resume(struct phy_device *phydev);
+ int genphy_soft_reset(struct phy_device *phydev);
++
++/* Clause 45 PHY */
++int genphy_c45_restart_aneg(struct phy_device *phydev);
++int genphy_c45_aneg_done(struct phy_device *phydev);
++int genphy_c45_read_link(struct phy_device *phydev, u32 mmd_mask);
++int genphy_c45_read_lpa(struct phy_device *phydev);
++int genphy_c45_read_pma(struct phy_device *phydev);
++int genphy_c45_pma_setup_forced(struct phy_device *phydev);
++int genphy_c45_an_disable_aneg(struct phy_device *phydev);
++
+ void phy_driver_unregister(struct phy_driver *drv);
+ void phy_drivers_unregister(struct phy_driver *drv, int n);
+ int phy_driver_register(struct phy_driver *new_driver, struct module *owner);
diff --git a/target/linux/mvebu/patches-4.9/408-net-phy-hook-up-clause-45-autonegotiation-restart.patch b/target/linux/mvebu/patches-4.9/408-net-phy-hook-up-clause-45-autonegotiation-restart.patch
new file mode 100644
index 0000000000..7a16bd5963
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/408-net-phy-hook-up-clause-45-autonegotiation-restart.patch
@@ -0,0 +1,54 @@
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Fri, 13 Jan 2017 11:17:30 +0000
+Subject: [PATCH] net: phy: hook up clause 45 autonegotiation restart
+
+genphy_restart_aneg() can only restart autonegotiation on clause 22
+PHYs. Add a phy_restart_aneg() function which selects between the
+clause 22 and clause 45 restart functionality depending on the PHY
+type.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -134,6 +134,24 @@ static int phy_config_interrupt(struct p
+ return 0;
+ }
+
++/**
++ * phy_restart_aneg - restart auto-negotiation
++ * @phydev: target phy_device struct
++ *
++ * Restart the autonegotiation on @phydev. Returns >= 0 on success or
++ * negative errno on error.
++ */
++static int phy_restart_aneg(struct phy_device *phydev)
++{
++ int ret;
++
++ if (phydev->is_c45)
++ ret = genphy_c45_restart_aneg(phydev);
++ else
++ ret = genphy_restart_aneg(phydev);
++
++ return ret;
++}
+
+ /**
+ * phy_aneg_done - return auto-negotiation status
+@@ -1403,3 +1421,14 @@ int phy_ethtool_set_link_ksettings(struc
+ return phy_ethtool_ksettings_set(phydev, cmd);
+ }
+ EXPORT_SYMBOL(phy_ethtool_set_link_ksettings);
++
++int phy_ethtool_nway_reset(struct net_device *ndev)
++{
++ struct phy_device *phydev = ndev->phydev;
++
++ if (!phydev)
++ return -ENODEV;
++
++ return phy_restart_aneg(phydev);
++}
++EXPORT_SYMBOL(phy_ethtool_nway_reset);
diff --git a/target/linux/mvebu/patches-4.9/409-net-phy-don-t-double-read-clause-45-status-register.patch b/target/linux/mvebu/patches-4.9/409-net-phy-don-t-double-read-clause-45-status-register.patch
new file mode 100644
index 0000000000..ee53fe0380
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/409-net-phy-don-t-double-read-clause-45-status-register.patch
@@ -0,0 +1,35 @@
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Thu, 5 Jan 2017 00:23:40 +0000
+Subject: [PATCH] net: phy: don't double-read clause 45 status register
+
+One of the design decisions behind the link status bit in the status
+register is that it latches low on link loss. This is so that link loss
+events are not missed. Double-reading the status register means that we
+always read the current state of the link, clearing any link loss event.
+
+This can cause problems - for example, if the link has negotiated a
+different set of operating parameters, these will not be communicated
+to the MAC as the PHY state machine will still think that the link has
+remained active.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+
+--- a/drivers/net/phy/phy-c45.c
++++ b/drivers/net/phy/phy-c45.c
+@@ -143,12 +143,9 @@ int genphy_c45_read_link(struct phy_devi
+ devad = __ffs(mmd_mask);
+ mmd_mask &= ~BIT(devad);
+
+- val = phy_read_mmd(phydev, devad, MDIO_STAT1);
+- if (val < 0)
+- return val;
+-
+- /* Read twice because link state is latched and a
+- * read moves the current state into the register
++ /* The link state is latched low so that momentary link
++ * drops can be detected. Do not double-read the status
++ * register if the link is down.
+ */
+ val = phy_read_mmd(phydev, devad, MDIO_STAT1);
+ if (val < 0)
diff --git a/target/linux/mvebu/patches-4.9/410-net-phy-allow-settings-table-to-support-more-than-32.patch b/target/linux/mvebu/patches-4.9/410-net-phy-allow-settings-table-to-support-more-than-32.patch
new file mode 100644
index 0000000000..b6d850577f
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/410-net-phy-allow-settings-table-to-support-more-than-32.patch
@@ -0,0 +1,142 @@
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Thu, 5 Jan 2017 16:32:14 +0000
+Subject: [PATCH] net: phy: allow settings table to support more than 32
+ link modes
+
+Allow the phy settings table to support more than 32 link modes by
+switching to the ethtool link mode bit number representation, rather
+than storing the mask. This will allow phylink and other ethtool
+code to share the settings table to look up settings.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -175,7 +175,7 @@ static inline int phy_aneg_done(struct p
+ struct phy_setting {
+ int speed;
+ int duplex;
+- u32 setting;
++ int bit;
+ };
+
+ /* A mapping of all SUPPORTED settings to speed/duplex. This table
+@@ -185,57 +185,57 @@ static const struct phy_setting settings
+ {
+ .speed = SPEED_10000,
+ .duplex = DUPLEX_FULL,
+- .setting = SUPPORTED_10000baseKR_Full,
++ .bit = ETHTOOL_LINK_MODE_10000baseKR_Full_BIT,
+ },
+ {
+ .speed = SPEED_10000,
+ .duplex = DUPLEX_FULL,
+- .setting = SUPPORTED_10000baseKX4_Full,
++ .bit = ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT,
+ },
+ {
+ .speed = SPEED_10000,
+ .duplex = DUPLEX_FULL,
+- .setting = SUPPORTED_10000baseT_Full,
++ .bit = ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
+ },
+ {
+ .speed = SPEED_2500,
+ .duplex = DUPLEX_FULL,
+- .setting = SUPPORTED_2500baseX_Full,
++ .bit = ETHTOOL_LINK_MODE_2500baseX_Full_BIT,
+ },
+ {
+ .speed = SPEED_1000,
+ .duplex = DUPLEX_FULL,
+- .setting = SUPPORTED_1000baseKX_Full,
++ .bit = ETHTOOL_LINK_MODE_1000baseKX_Full_BIT,
+ },
+ {
+ .speed = SPEED_1000,
+ .duplex = DUPLEX_FULL,
+- .setting = SUPPORTED_1000baseT_Full,
++ .bit = ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+ },
+ {
+ .speed = SPEED_1000,
+ .duplex = DUPLEX_HALF,
+- .setting = SUPPORTED_1000baseT_Half,
++ .bit = ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
+ },
+ {
+ .speed = SPEED_100,
+ .duplex = DUPLEX_FULL,
+- .setting = SUPPORTED_100baseT_Full,
++ .bit = ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+ },
+ {
+ .speed = SPEED_100,
+ .duplex = DUPLEX_HALF,
+- .setting = SUPPORTED_100baseT_Half,
++ .bit = ETHTOOL_LINK_MODE_100baseT_Half_BIT,
+ },
+ {
+ .speed = SPEED_10,
+ .duplex = DUPLEX_FULL,
+- .setting = SUPPORTED_10baseT_Full,
++ .bit = ETHTOOL_LINK_MODE_10baseT_Full_BIT,
+ },
+ {
+ .speed = SPEED_10,
+ .duplex = DUPLEX_HALF,
+- .setting = SUPPORTED_10baseT_Half,
++ .bit = ETHTOOL_LINK_MODE_10baseT_Half_BIT,
+ },
+ };
+
+@@ -243,7 +243,8 @@ static const struct phy_setting settings
+ * phy_lookup_setting - lookup a PHY setting
+ * @speed: speed to match
+ * @duplex: duplex to match
+- * @feature: allowed link modes
++ * @mask: allowed link modes
++ * @maxbit: bit size of link modes
+ * @exact: an exact match is required
+ *
+ * Search the settings array for a setting that matches the speed and
+@@ -257,13 +258,14 @@ static const struct phy_setting settings
+ * they all fail, %NULL will be returned.
+ */
+ static const struct phy_setting *
+-phy_lookup_setting(int speed, int duplex, u32 features, bool exact)
++phy_lookup_setting(int speed, int duplex, const unsigned long *mask,
++ size_t maxbit, bool exact)
+ {
+ const struct phy_setting *p, *match = NULL, *last = NULL;
+ int i;
+
+ for (i = 0, p = settings; i < ARRAY_SIZE(settings); i++, p++) {
+- if (p->setting & features) {
++ if (p->bit < maxbit && test_bit(p->bit, mask)) {
+ last = p;
+ if (p->speed == speed && p->duplex == duplex) {
+ /* Exact match for speed and duplex */
+@@ -302,7 +304,9 @@ phy_lookup_setting(int speed, int duplex
+ static const struct phy_setting *
+ phy_find_valid(int speed, int duplex, u32 supported)
+ {
+- return phy_lookup_setting(speed, duplex, supported, false);
++ unsigned long mask = supported;
++
++ return phy_lookup_setting(speed, duplex, &mask, BITS_PER_LONG, false);
+ }
+
+ /**
+@@ -316,7 +320,9 @@ phy_find_valid(int speed, int duplex, u3
+ */
+ static inline bool phy_check_valid(int speed, int duplex, u32 features)
+ {
+- return !!phy_lookup_setting(speed, duplex, features, true);
++ unsigned long mask = features;
++
++ return !!phy_lookup_setting(speed, duplex, &mask, BITS_PER_LONG, true);
+ }
+
+ /**
diff --git a/target/linux/mvebu/patches-4.9/411-net-phy-split-out-PHY-speed-and-duplex-string-genera.patch b/target/linux/mvebu/patches-4.9/411-net-phy-split-out-PHY-speed-and-duplex-string-genera.patch
new file mode 100644
index 0000000000..4111b004d2
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/411-net-phy-split-out-PHY-speed-and-duplex-string-genera.patch
@@ -0,0 +1,103 @@
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Mon, 2 Jan 2017 17:52:18 +0000
+Subject: [PATCH] net: phy: split out PHY speed and duplex string
+ generation
+
+Other code would like to make use of this, so make the speed and duplex
+string generation visible, and place it in a separate file.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -38,26 +38,6 @@
+
+ #include <asm/irq.h>
+
+-static const char *phy_speed_to_str(int speed)
+-{
+- switch (speed) {
+- case SPEED_10:
+- return "10Mbps";
+- case SPEED_100:
+- return "100Mbps";
+- case SPEED_1000:
+- return "1Gbps";
+- case SPEED_2500:
+- return "2.5Gbps";
+- case SPEED_10000:
+- return "10Gbps";
+- case SPEED_UNKNOWN:
+- return "Unknown";
+- default:
+- return "Unsupported (update phy.c)";
+- }
+-}
+-
+ #define PHY_STATE_STR(_state) \
+ case PHY_##_state: \
+ return __stringify(_state); \
+@@ -93,7 +73,7 @@ void phy_print_status(struct phy_device
+ netdev_info(phydev->attached_dev,
+ "Link is Up - %s/%s - flow control %s\n",
+ phy_speed_to_str(phydev->speed),
+- DUPLEX_FULL == phydev->duplex ? "Full" : "Half",
++ phy_duplex_to_str(phydev->duplex),
+ phydev->pause ? "rx/tx" : "off");
+ } else {
+ netdev_info(phydev->attached_dev, "Link is Down\n");
+--- a/drivers/net/phy/phy-core.c
++++ b/drivers/net/phy/phy-core.c
+@@ -9,6 +9,39 @@
+ #include <linux/export.h>
+ #include <linux/phy.h>
+
++const char *phy_speed_to_str(int speed)
++{
++ switch (speed) {
++ case SPEED_10:
++ return "10Mbps";
++ case SPEED_100:
++ return "100Mbps";
++ case SPEED_1000:
++ return "1Gbps";
++ case SPEED_2500:
++ return "2.5Gbps";
++ case SPEED_10000:
++ return "10Gbps";
++ case SPEED_UNKNOWN:
++ return "Unknown";
++ default:
++ return "Unsupported (update phy-core.c)";
++ }
++}
++EXPORT_SYMBOL_GPL(phy_speed_to_str);
++
++const char *phy_duplex_to_str(unsigned int duplex)
++{
++ if (duplex == DUPLEX_HALF)
++ return "Half";
++ if (duplex == DUPLEX_FULL)
++ return "Full";
++ if (duplex == DUPLEX_UNKNOWN)
++ return "Unknown";
++ return "Unsupported (update phy-core.c)";
++}
++EXPORT_SYMBOL_GPL(phy_duplex_to_str);
++
+ static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad,
+ int addr)
+ {
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -642,6 +642,9 @@ struct phy_fixup {
+ int (*run)(struct phy_device *phydev);
+ };
+
++const char *phy_speed_to_str(int speed);
++const char *phy_duplex_to_str(unsigned int duplex);
++
+ /**
+ * phy_read_mmd - Convenience function for reading a register
+ * from an MMD on a given PHY.
diff --git a/target/linux/mvebu/patches-4.9/412-net-phy-move-phy_lookup_setting-and-guts-of-phy_supp.patch b/target/linux/mvebu/patches-4.9/412-net-phy-move-phy_lookup_setting-and-guts-of-phy_supp.patch
new file mode 100644
index 0000000000..02a8fa5748
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/412-net-phy-move-phy_lookup_setting-and-guts-of-phy_supp.patch
@@ -0,0 +1,329 @@
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Thu, 5 Jan 2017 16:47:39 +0000
+Subject: [PATCH] net: phy: move phy_lookup_setting() and guts of
+ phy_supported_speeds() to phy-core
+
+phy_lookup_setting() provides useful functionality in ethtool code
+outside phylib. Move it to phy-core and allow it to be re-used (eg,
+in phylink) rather than duplicated elsewhere. Note that this supports
+the larger linkmode space.
+
+As we move the phy settings table, we also need to move the guts of
+phy_supported_speeds() as well.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -149,125 +149,6 @@ static inline int phy_aneg_done(struct p
+ return genphy_aneg_done(phydev);
+ }
+
+-/* A structure for mapping a particular speed and duplex
+- * combination to a particular SUPPORTED and ADVERTISED value
+- */
+-struct phy_setting {
+- int speed;
+- int duplex;
+- int bit;
+-};
+-
+-/* A mapping of all SUPPORTED settings to speed/duplex. This table
+- * must be grouped by speed and sorted in descending match priority
+- * - iow, descending speed. */
+-static const struct phy_setting settings[] = {
+- {
+- .speed = SPEED_10000,
+- .duplex = DUPLEX_FULL,
+- .bit = ETHTOOL_LINK_MODE_10000baseKR_Full_BIT,
+- },
+- {
+- .speed = SPEED_10000,
+- .duplex = DUPLEX_FULL,
+- .bit = ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT,
+- },
+- {
+- .speed = SPEED_10000,
+- .duplex = DUPLEX_FULL,
+- .bit = ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
+- },
+- {
+- .speed = SPEED_2500,
+- .duplex = DUPLEX_FULL,
+- .bit = ETHTOOL_LINK_MODE_2500baseX_Full_BIT,
+- },
+- {
+- .speed = SPEED_1000,
+- .duplex = DUPLEX_FULL,
+- .bit = ETHTOOL_LINK_MODE_1000baseKX_Full_BIT,
+- },
+- {
+- .speed = SPEED_1000,
+- .duplex = DUPLEX_FULL,
+- .bit = ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+- },
+- {
+- .speed = SPEED_1000,
+- .duplex = DUPLEX_HALF,
+- .bit = ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
+- },
+- {
+- .speed = SPEED_100,
+- .duplex = DUPLEX_FULL,
+- .bit = ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+- },
+- {
+- .speed = SPEED_100,
+- .duplex = DUPLEX_HALF,
+- .bit = ETHTOOL_LINK_MODE_100baseT_Half_BIT,
+- },
+- {
+- .speed = SPEED_10,
+- .duplex = DUPLEX_FULL,
+- .bit = ETHTOOL_LINK_MODE_10baseT_Full_BIT,
+- },
+- {
+- .speed = SPEED_10,
+- .duplex = DUPLEX_HALF,
+- .bit = ETHTOOL_LINK_MODE_10baseT_Half_BIT,
+- },
+-};
+-
+-/**
+- * phy_lookup_setting - lookup a PHY setting
+- * @speed: speed to match
+- * @duplex: duplex to match
+- * @mask: allowed link modes
+- * @maxbit: bit size of link modes
+- * @exact: an exact match is required
+- *
+- * Search the settings array for a setting that matches the speed and
+- * duplex, and which is supported.
+- *
+- * If @exact is unset, either an exact match or %NULL for no match will
+- * be returned.
+- *
+- * If @exact is set, an exact match, the fastest supported setting at
+- * or below the specified speed, the slowest supported setting, or if
+- * they all fail, %NULL will be returned.
+- */
+-static const struct phy_setting *
+-phy_lookup_setting(int speed, int duplex, const unsigned long *mask,
+- size_t maxbit, bool exact)
+-{
+- const struct phy_setting *p, *match = NULL, *last = NULL;
+- int i;
+-
+- for (i = 0, p = settings; i < ARRAY_SIZE(settings); i++, p++) {
+- if (p->bit < maxbit && test_bit(p->bit, mask)) {
+- last = p;
+- if (p->speed == speed && p->duplex == duplex) {
+- /* Exact match for speed and duplex */
+- match = p;
+- break;
+- } else if (!exact) {
+- if (!match && p->speed <= speed)
+- /* Candidate */
+- match = p;
+-
+- if (p->speed < speed)
+- break;
+- }
+- }
+- }
+-
+- if (!match && !exact)
+- match = last;
+-
+- return match;
+-}
+-
+ /**
+ * phy_find_valid - find a PHY setting that matches the requested parameters
+ * @speed: desired speed
+@@ -290,6 +171,25 @@ phy_find_valid(int speed, int duplex, u3
+ }
+
+ /**
++ * phy_supported_speeds - return all speeds currently supported by a phy device
++ * @phy: The phy device to return supported speeds of.
++ * @speeds: buffer to store supported speeds in.
++ * @size: size of speeds buffer.
++ *
++ * Description: Returns the number of supported speeds, and fills the speeds
++ * buffer with the supported speeds. If speeds buffer is too small to contain
++ * all currently supported speeds, will return as many speeds as can fit.
++ */
++unsigned int phy_supported_speeds(struct phy_device *phy,
++ unsigned int *speeds,
++ unsigned int size)
++{
++ unsigned long supported = phy->supported;
++
++ return phy_speeds(speeds, size, &supported, BITS_PER_LONG);
++}
++
++/**
+ * phy_check_valid - check if there is a valid PHY setting which matches
+ * speed, duplex, and feature mask
+ * @speed: speed to match
+--- a/drivers/net/phy/phy-core.c
++++ b/drivers/net/phy/phy-core.c
+@@ -42,6 +42,132 @@ const char *phy_duplex_to_str(unsigned i
+ }
+ EXPORT_SYMBOL_GPL(phy_duplex_to_str);
+
++/* A mapping of all SUPPORTED settings to speed/duplex. This table
++ * must be grouped by speed and sorted in descending match priority
++ * - iow, descending speed. */
++static const struct phy_setting settings[] = {
++ {
++ .speed = SPEED_10000,
++ .duplex = DUPLEX_FULL,
++ .bit = ETHTOOL_LINK_MODE_10000baseKR_Full_BIT,
++ },
++ {
++ .speed = SPEED_10000,
++ .duplex = DUPLEX_FULL,
++ .bit = ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT,
++ },
++ {
++ .speed = SPEED_10000,
++ .duplex = DUPLEX_FULL,
++ .bit = ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
++ },
++ {
++ .speed = SPEED_2500,
++ .duplex = DUPLEX_FULL,
++ .bit = ETHTOOL_LINK_MODE_2500baseX_Full_BIT,
++ },
++ {
++ .speed = SPEED_1000,
++ .duplex = DUPLEX_FULL,
++ .bit = ETHTOOL_LINK_MODE_1000baseKX_Full_BIT,
++ },
++ {
++ .speed = SPEED_1000,
++ .duplex = DUPLEX_FULL,
++ .bit = ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
++ },
++ {
++ .speed = SPEED_1000,
++ .duplex = DUPLEX_HALF,
++ .bit = ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
++ },
++ {
++ .speed = SPEED_100,
++ .duplex = DUPLEX_FULL,
++ .bit = ETHTOOL_LINK_MODE_100baseT_Full_BIT,
++ },
++ {
++ .speed = SPEED_100,
++ .duplex = DUPLEX_HALF,
++ .bit = ETHTOOL_LINK_MODE_100baseT_Half_BIT,
++ },
++ {
++ .speed = SPEED_10,
++ .duplex = DUPLEX_FULL,
++ .bit = ETHTOOL_LINK_MODE_10baseT_Full_BIT,
++ },
++ {
++ .speed = SPEED_10,
++ .duplex = DUPLEX_HALF,
++ .bit = ETHTOOL_LINK_MODE_10baseT_Half_BIT,
++ },
++};
++
++/**
++ * phy_lookup_setting - lookup a PHY setting
++ * @speed: speed to match
++ * @duplex: duplex to match
++ * @mask: allowed link modes
++ * @maxbit: bit size of link modes
++ * @exact: an exact match is required
++ *
++ * Search the settings array for a setting that matches the speed and
++ * duplex, and which is supported.
++ *
++ * If @exact is unset, either an exact match or %NULL for no match will
++ * be returned.
++ *
++ * If @exact is set, an exact match, the fastest supported setting at
++ * or below the specified speed, the slowest supported setting, or if
++ * they all fail, %NULL will be returned.
++ */
++const struct phy_setting *
++phy_lookup_setting(int speed, int duplex, const unsigned long *mask,
++ size_t maxbit, bool exact)
++{
++ const struct phy_setting *p, *match = NULL, *last = NULL;
++ int i;
++
++ for (i = 0, p = settings; i < ARRAY_SIZE(settings); i++, p++) {
++ if (p->bit < maxbit && test_bit(p->bit, mask)) {
++ last = p;
++ if (p->speed == speed && p->duplex == duplex) {
++ /* Exact match for speed and duplex */
++ match = p;
++ break;
++ } else if (!exact) {
++ if (!match && p->speed <= speed)
++ /* Candidate */
++ match = p;
++
++ if (p->speed < speed)
++ break;
++ }
++ }
++ }
++
++ if (!match && !exact)
++ match = last;
++
++ return match;
++}
++EXPORT_SYMBOL_GPL(phy_lookup_setting);
++
++size_t phy_speeds(unsigned int *speeds, size_t size,
++ unsigned long *mask, size_t maxbit)
++{
++ size_t count;
++ int i;
++
++ for (i = 0, count = 0; i < ARRAY_SIZE(settings) && count < size; i++)
++ if (settings[i].bit < maxbit &&
++ test_bit(settings[i].bit, mask) &&
++ (count == 0 || speeds[count - 1] != settings[i].speed))
++ speeds[count++] = settings[i].speed;
++
++ return count;
++}
++
+ static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad,
+ int addr)
+ {
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -645,6 +645,21 @@ struct phy_fixup {
+ const char *phy_speed_to_str(int speed);
+ const char *phy_duplex_to_str(unsigned int duplex);
+
++/* A structure for mapping a particular speed and duplex
++ * combination to a particular SUPPORTED and ADVERTISED value
++ */
++struct phy_setting {
++ u32 speed;
++ u8 duplex;
++ u8 bit;
++};
++
++const struct phy_setting *
++phy_lookup_setting(int speed, int duplex, const unsigned long *mask,
++ size_t maxbit, bool exact);
++size_t phy_speeds(unsigned int *speeds, size_t size,
++ unsigned long *mask, size_t maxbit);
++
+ /**
+ * phy_read_mmd - Convenience function for reading a register
+ * from an MMD on a given PHY.
diff --git a/target/linux/mvebu/patches-4.9/413-phy-export-phy_start_machine-for-phylink.patch b/target/linux/mvebu/patches-4.9/413-phy-export-phy_start_machine-for-phylink.patch
new file mode 100644
index 0000000000..93f979ab53
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/413-phy-export-phy_start_machine-for-phylink.patch
@@ -0,0 +1,22 @@
+From: Russell King <rmk+kernel@arm.linux.org.uk>
+Date: Fri, 16 Oct 2015 12:18:41 +0100
+Subject: [PATCH] phy: export phy_start_machine() for phylink
+
+phylink will need phy_start_machine exported, so lets export it as a
+GPL symbol. Documentation/networking/phy.txt indicates that this
+should be a PHY API function.
+
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
+---
+
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -580,6 +580,7 @@ void phy_start_machine(struct phy_device
+ {
+ queue_delayed_work(system_power_efficient_wq, &phydev->state_queue, HZ);
+ }
++EXPORT_SYMBOL_GPL(phy_start_machine);
+
+ /**
+ * phy_trigger_machine - trigger the state machine to run
diff --git a/target/linux/mvebu/patches-4.9/414-phy-add-I2C-mdio-bus.patch b/target/linux/mvebu/patches-4.9/414-phy-add-I2C-mdio-bus.patch
new file mode 100644
index 0000000000..c389817c6e
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/414-phy-add-I2C-mdio-bus.patch
@@ -0,0 +1,180 @@
+From: Russell King <rmk+kernel@arm.linux.org.uk>
+Date: Fri, 25 Sep 2015 17:43:52 +0100
+Subject: [PATCH] phy: add I2C mdio bus
+
+Add an I2C MDIO bus bridge library, to allow phylib to access PHYs which
+are connected to an I2C bus instead of the more conventional MDIO bus.
+Such PHYs can be found in SFP adapters and SFF modules.
+
+Since PHYs appear at I2C bus address 0x40..0x5f, and 0x50/0x51 are
+reserved for SFP EEPROMs/diagnostics, we must not allow the MDIO bus
+to access these I2C addresses.
+
+Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
+---
+ create mode 100644 drivers/net/phy/mdio-i2c.c
+ create mode 100644 drivers/net/phy/mdio-i2c.h
+
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -105,6 +105,16 @@ config MDIO_HISI_FEMAC
+ This module provides a driver for the MDIO busses found in the
+ Hisilicon SoC that have an Fast Ethernet MAC.
+
++config MDIO_I2C
++ tristate
++ depends on I2C
++ help
++ Support I2C based PHYs. This provides a MDIO bus bridged
++ to I2C to allow PHYs connected in I2C mode to be accessed
++ using the existing infrastructure.
++
++ This is library mode.
++
+ config MDIO_MOXART
+ tristate "MOXA ART MDIO interface support"
+ depends on ARCH_MOXART
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -33,6 +33,7 @@ obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += md
+ obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium.o
+ obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
+ obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o
++obj-$(CONFIG_MDIO_I2C) += mdio-i2c.o
+ obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
+ obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
+ obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o
+--- /dev/null
++++ b/drivers/net/phy/mdio-i2c.c
+@@ -0,0 +1,109 @@
++/*
++ * MDIO I2C bridge
++ *
++ * Copyright (C) 2015-2016 Russell King
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * Network PHYs can appear on I2C buses when they are part of SFP module.
++ * This driver exposes these PHYs to the networking PHY code, allowing
++ * our PHY drivers access to these PHYs, and so allowing configuration
++ * of their settings.
++ */
++#include <linux/i2c.h>
++#include <linux/phy.h>
++
++#include "mdio-i2c.h"
++
++/*
++ * I2C bus addresses 0x50 and 0x51 are normally an EEPROM, which is
++ * specified to be present in SFP modules. These correspond with PHY
++ * addresses 16 and 17. Disallow access to these "phy" addresses.
++ */
++static bool i2c_mii_valid_phy_id(int phy_id)
++{
++ return phy_id != 0x10 && phy_id != 0x11;
++}
++
++static unsigned int i2c_mii_phy_addr(int phy_id)
++{
++ return phy_id + 0x40;
++}
++
++static int i2c_mii_read(struct mii_bus *bus, int phy_id, int reg)
++{
++ struct i2c_adapter *i2c = bus->priv;
++ struct i2c_msg msgs[2];
++ u8 data[2], dev_addr = reg;
++ int bus_addr, ret;
++
++ if (!i2c_mii_valid_phy_id(phy_id))
++ return 0xffff;
++
++ bus_addr = i2c_mii_phy_addr(phy_id);
++ msgs[0].addr = bus_addr;
++ msgs[0].flags = 0;
++ msgs[0].len = 1;
++ msgs[0].buf = &dev_addr;
++ msgs[1].addr = bus_addr;
++ msgs[1].flags = I2C_M_RD;
++ msgs[1].len = sizeof(data);
++ msgs[1].buf = data;
++
++ ret = i2c_transfer(i2c, msgs, ARRAY_SIZE(msgs));
++ if (ret != ARRAY_SIZE(msgs))
++ return 0xffff;
++
++ return data[0] << 8 | data[1];
++}
++
++static int i2c_mii_write(struct mii_bus *bus, int phy_id, int reg, u16 val)
++{
++ struct i2c_adapter *i2c = bus->priv;
++ struct i2c_msg msg;
++ int ret;
++ u8 data[3];
++
++ if (!i2c_mii_valid_phy_id(phy_id))
++ return 0;
++
++ data[0] = reg;
++ data[1] = val >> 8;
++ data[2] = val;
++
++ msg.addr = i2c_mii_phy_addr(phy_id);
++ msg.flags = 0;
++ msg.len = 3;
++ msg.buf = data;
++
++ ret = i2c_transfer(i2c, &msg, 1);
++
++ return ret < 0 ? ret : 0;
++}
++
++struct mii_bus *mdio_i2c_alloc(struct device *parent, struct i2c_adapter *i2c)
++{
++ struct mii_bus *mii;
++
++ if (!i2c_check_functionality(i2c, I2C_FUNC_I2C))
++ return ERR_PTR(-EINVAL);
++
++ mii = mdiobus_alloc();
++ if (!mii)
++ return ERR_PTR(-ENOMEM);
++
++ snprintf(mii->id, MII_BUS_ID_SIZE, "i2c:%s", dev_name(parent));
++ mii->parent = parent;
++ mii->read = i2c_mii_read;
++ mii->write = i2c_mii_write;
++ mii->priv = i2c;
++
++ return mii;
++}
++EXPORT_SYMBOL_GPL(mdio_i2c_alloc);
++
++MODULE_AUTHOR("Russell King");
++MODULE_DESCRIPTION("MDIO I2C bridge library");
++MODULE_LICENSE("GPL v2");
+--- /dev/null
++++ b/drivers/net/phy/mdio-i2c.h
+@@ -0,0 +1,19 @@
++/*
++ * MDIO I2C bridge
++ *
++ * Copyright (C) 2015 Russell King
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef MDIO_I2C_H
++#define MDIO_I2C_H
++
++struct device;
++struct i2c_adapter;
++struct mii_bus;
++
++struct mii_bus *mdio_i2c_alloc(struct device *parent, struct i2c_adapter *i2c);
++
++#endif
diff --git a/target/linux/mvebu/patches-4.9/415-phylink-add-phylink-infrastructure.patch b/target/linux/mvebu/patches-4.9/415-phylink-add-phylink-infrastructure.patch
new file mode 100644
index 0000000000..87c0daf178
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/415-phylink-add-phylink-infrastructure.patch
@@ -0,0 +1,1120 @@
+From: Russell King <rmk+kernel@arm.linux.org.uk>
+Date: Tue, 22 Sep 2015 20:52:18 +0100
+Subject: [PATCH] phylink: add phylink infrastructure
+
+The link between the ethernet MAC and its PHY has become more complex
+as the interface evolves. This is especially true with serdes links,
+where the part of the PHY is effectively integrated into the MAC.
+
+Serdes links can be connected to a variety of devices, including SFF
+modules soldered down onto the board with the MAC, a SFP cage with
+a hotpluggable SFP module which may contain a PHY or directly modulate
+the serdes signals onto optical media with or without a PHY, or even
+a classical PHY connection.
+
+Moreover, the negotiation information on serdes links comes in two
+varieties - SGMII mode, where the PHY provides its speed/duplex/flow
+control information to the MAC, and 1000base-X mode where both ends
+exchange their abilities and each resolve the link capabilities.
+
+This means we need a more flexible means to support these arrangements,
+particularly with the hotpluggable nature of SFP, where the PHY can
+be attached or detached after the network device has been brought up.
+
+Ethtool information can come from multiple sources:
+- we may have a PHY operating in either SGMII or 1000base-X mode, in
+ which case we take ethtool/mii data directly from the PHY.
+- we may have a optical SFP module without a PHY, with the MAC
+ operating in 1000base-X mode - the ethtool/mii data needs to come
+ from the MAC.
+- we may have a copper SFP module with a PHY whic can't be accessed,
+ which means we need to take ethtool/mii data from the MAC.
+
+Phylink aims to solve this by providing an intermediary between the
+MAC and PHY, providing a safe way for PHYs to be hotplugged, and
+allowing a SFP driver to reconfigure the serdes connection.
+
+Phylink also takes over support of fixed link connections, where the
+speed/duplex/flow control are fixed, but link status may be controlled
+by a GPIO signal. By avoiding the fixed-phy implementation, phylink
+can provide a faster response to link events: fixed-phy has to wait for
+phylib to operate its state machine, which can take several seconds.
+In comparison, phylink takes milliseconds.
+
+Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
+
+- remove sync status
+- rework supported and advertisment handling
+- add 1000base-x speed for fixed links
+- use functionality exported from phy-core, reworking
+ __phylink_ethtool_ksettings_set for it
+---
+ create mode 100644 drivers/net/phy/phylink.c
+ create mode 100644 include/linux/phylink.h
+
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -10,6 +10,16 @@ menuconfig PHYLIB
+ devices. This option provides infrastructure for
+ managing PHY devices.
+
++config PHYLINK
++ tristate
++ depends on NETDEVICES
++ select PHYLIB
++ select SWPHY
++ help
++ PHYlink models the link between the PHY and MAC, allowing fixed
++ configuration links, PHYs, and Serdes links with MAC level
++ autonegotiation modes.
++
+ if PHYLIB
+
+ config SWPHY
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -6,6 +6,7 @@ libphy-$(CONFIG_SWPHY) += swphy.o
+
+ obj-$(CONFIG_MDIO_BOARDINFO) += mdio-boardinfo.o
+
++obj-$(CONFIG_PHYLINK) += phylink.o
+ obj-$(CONFIG_PHYLIB) += libphy.o
+
+ obj-$(CONFIG_SWCONFIG) += swconfig.o
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -1003,6 +1003,7 @@ void phy_detach(struct phy_device *phyde
+ phydev->attached_dev->phydev = NULL;
+ phydev->attached_dev = NULL;
+ phy_suspend(phydev);
++ phydev->phylink = NULL;
+
+ /* If the device had no specific driver before (i.e. - it
+ * was using the generic driver), we unbind the device
+--- /dev/null
++++ b/drivers/net/phy/phylink.c
+@@ -0,0 +1,903 @@
++/*
++ * phylink models the MAC to optional PHY connection, supporting
++ * technologies such as SFP cages where the PHY is hot-pluggable.
++ *
++ * Copyright (C) 2015 Russell King
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/ethtool.h>
++#include <linux/export.h>
++#include <linux/gpio/consumer.h>
++#include <linux/netdevice.h>
++#include <linux/of.h>
++#include <linux/of_mdio.h>
++#include <linux/phy.h>
++#include <linux/phy_fixed.h>
++#include <linux/phylink.h>
++#include <linux/spinlock.h>
++#include <linux/workqueue.h>
++
++#include "swphy.h"
++
++#define SUPPORTED_INTERFACES \
++ (SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_FIBRE | \
++ SUPPORTED_BNC | SUPPORTED_AUI | SUPPORTED_Backplane)
++#define ADVERTISED_INTERFACES \
++ (ADVERTISED_TP | ADVERTISED_MII | ADVERTISED_FIBRE | \
++ ADVERTISED_BNC | ADVERTISED_AUI | ADVERTISED_Backplane)
++
++enum {
++ PHYLINK_DISABLE_STOPPED,
++};
++
++struct phylink {
++ struct net_device *netdev;
++ const struct phylink_mac_ops *ops;
++ struct mutex config_mutex;
++
++ unsigned long phylink_disable_state; /* bitmask of disables */
++ struct phy_device *phydev;
++ phy_interface_t link_interface; /* PHY_INTERFACE_xxx */
++ u8 link_an_mode; /* MLO_AN_xxx */
++ u8 link_port; /* The current non-phy ethtool port */
++ /* ethtool supported mask for ports */
++ __ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
++
++ /* The link configuration settings */
++ struct phylink_link_state link_config;
++ struct gpio_desc *link_gpio;
++
++ struct mutex state_mutex; /* may be taken within config_mutex */
++ struct phylink_link_state phy_state;
++ struct work_struct resolve;
++
++ const struct phylink_module_ops *module_ops;
++ void *module_data;
++};
++
++static inline void linkmode_zero(unsigned long *dst)
++{
++ bitmap_zero(dst, __ETHTOOL_LINK_MODE_MASK_NBITS);
++}
++
++static inline void linkmode_copy(unsigned long *dst, const unsigned long *src)
++{
++ bitmap_copy(dst, src, __ETHTOOL_LINK_MODE_MASK_NBITS);
++}
++
++static inline void linkmode_and(unsigned long *dst, const unsigned long *a,
++ const unsigned long *b)
++{
++ bitmap_and(dst, a, b, __ETHTOOL_LINK_MODE_MASK_NBITS);
++}
++
++static inline void linkmode_or(unsigned long *dst, const unsigned long *a,
++ const unsigned long *b)
++{
++ bitmap_or(dst, a, b, __ETHTOOL_LINK_MODE_MASK_NBITS);
++}
++
++static inline bool linkmode_empty(const unsigned long *src)
++{
++ return bitmap_empty(src, __ETHTOOL_LINK_MODE_MASK_NBITS);
++}
++
++static void phylink_set_port_bits(unsigned long *bits)
++{
++ __set_bit(ETHTOOL_LINK_MODE_TP_BIT, bits);
++ __set_bit(ETHTOOL_LINK_MODE_AUI_BIT, bits);
++ __set_bit(ETHTOOL_LINK_MODE_MII_BIT, bits);
++ __set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, bits);
++ __set_bit(ETHTOOL_LINK_MODE_BNC_BIT, bits);
++ __set_bit(ETHTOOL_LINK_MODE_Backplane_BIT, bits);
++}
++
++static const char *phylink_an_mode_str(unsigned int mode)
++{
++ static const char *modestr[] = {
++ [MLO_AN_PHY] = "phy",
++ [MLO_AN_FIXED] = "fixed",
++ [MLO_AN_SGMII] = "SGMII",
++ [MLO_AN_8023Z] = "802.3z",
++ };
++
++ return mode < ARRAY_SIZE(modestr) ? modestr[mode] : "unknown";
++}
++
++static int phylink_parse_fixedlink(struct phylink *pl, struct device_node *np)
++{
++ __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
++ struct device_node *fixed_node;
++ const struct phy_setting *s;
++ struct gpio_desc *desc;
++ const __be32 *fixed_prop;
++ u32 speed;
++ int ret, len;
++
++ fixed_node = of_get_child_by_name(np, "fixed-link");
++ if (fixed_node) {
++ ret = of_property_read_u32(fixed_node, "speed", &speed);
++
++ pl->link_config.speed = speed;
++ pl->link_config.duplex = DUPLEX_HALF;
++
++ if (of_property_read_bool(fixed_node, "full-duplex"))
++ pl->link_config.duplex = DUPLEX_FULL;
++ if (of_property_read_bool(fixed_node, "pause"))
++ pl->link_config.pause |= MLO_PAUSE_SYM;
++ if (of_property_read_bool(fixed_node, "asym-pause"))
++ pl->link_config.pause |= MLO_PAUSE_ASYM;
++
++ if (ret == 0) {
++ desc = fwnode_get_named_gpiod(&fixed_node->fwnode,
++ "link-gpios");
++
++ if (!IS_ERR(desc))
++ pl->link_gpio = desc;
++ else if (desc == ERR_PTR(-EPROBE_DEFER))
++ ret = -EPROBE_DEFER;
++ }
++ of_node_put(fixed_node);
++
++ if (ret)
++ return ret;
++ } else {
++ fixed_prop = of_get_property(np, "fixed-link", &len);
++ if (!fixed_prop) {
++ netdev_err(pl->netdev, "broken fixed-link?\n");
++ return -EINVAL;
++ }
++ if (len == 5 * sizeof(*fixed_prop)) {
++ pl->link_config.duplex = be32_to_cpu(fixed_prop[1]) ?
++ DUPLEX_FULL : DUPLEX_HALF;
++ pl->link_config.speed = be32_to_cpu(fixed_prop[2]);
++ if (be32_to_cpu(fixed_prop[3]))
++ pl->link_config.pause |= MLO_PAUSE_SYM;
++ if (be32_to_cpu(fixed_prop[4]))
++ pl->link_config.pause |= MLO_PAUSE_ASYM;
++ }
++ }
++
++ bitmap_fill(mask, __ETHTOOL_LINK_MODE_MASK_NBITS);
++ pl->ops->validate_support(pl->netdev, MLO_AN_FIXED, mask);
++
++ pl->link_config.link = 1;
++ pl->link_config.an_complete = 1;
++
++ if (pl->link_config.speed > SPEED_1000 &&
++ pl->link_config.duplex != DUPLEX_FULL)
++ netdev_warn(pl->netdev, "fixed link specifies half duplex for %dMbps link?\n",
++ pl->link_config.speed);
++
++ s = phy_lookup_setting(pl->link_config.speed, pl->link_config.duplex,
++ mask, __ETHTOOL_LINK_MODE_MASK_NBITS, true);
++ if (s) {
++ __set_bit(s->bit, pl->supported);
++ } else {
++ netdev_warn(pl->netdev, "fixed link %s duplex %dMbps not recognised\n",
++ pl->link_config.duplex == DUPLEX_FULL ? "full" : "half",
++ pl->link_config.speed);
++ }
++ return 0;
++}
++
++static int phylink_parse_mode(struct phylink *pl, struct device_node *np)
++{
++ struct device_node *dn;
++ const char *managed;
++
++ dn = of_get_child_by_name(np, "fixed-link");
++ if (dn || of_find_property(np, "fixed-link", NULL))
++ pl->link_an_mode = MLO_AN_FIXED;
++ of_node_put(dn);
++
++ if (of_property_read_string(np, "managed", &managed) == 0 &&
++ strcmp(managed, "in-band-status") == 0) {
++ if (pl->link_an_mode == MLO_AN_FIXED) {
++ netdev_err(pl->netdev,
++ "can't use both fixed-link and in-band-status\n");
++ return -EINVAL;
++ }
++ phylink_set(pl->supported, 10baseT_Half);
++ phylink_set(pl->supported, 10baseT_Full);
++ phylink_set(pl->supported, 100baseT_Half);
++ phylink_set(pl->supported, 100baseT_Full);
++ phylink_set(pl->supported, 1000baseT_Half);
++ phylink_set(pl->supported, 1000baseT_Full);
++ phylink_set(pl->supported, Asym_Pause);
++ phylink_set(pl->supported, Pause);
++ pl->link_an_mode = MLO_AN_SGMII;
++ pl->link_config.an_enabled = true;
++ pl->ops->validate_support(pl->netdev, pl->link_an_mode,
++ pl->supported);
++ }
++
++ return 0;
++}
++
++
++static void phylink_init_advert(struct phylink *pl, unsigned int mode,
++ const unsigned long *supported,
++ unsigned long *advertising)
++{
++ linkmode_copy(advertising, supported);
++ if (pl->ops->validate_advert)
++ pl->ops->validate_advert(pl->netdev, mode, supported,
++ advertising);
++}
++
++static void phylink_mac_config(struct phylink *pl,
++ const struct phylink_link_state *state)
++{
++ netdev_dbg(pl->netdev,
++ "%s: mode=%s/%s/%s adv=%*pb pause=%02x link=%u an=%u\n",
++ __func__, phylink_an_mode_str(pl->link_an_mode),
++ phy_speed_to_str(state->speed),
++ phy_duplex_to_str(state->duplex),
++ __ETHTOOL_LINK_MODE_MASK_NBITS, state->advertising,
++ state->pause, state->link, state->an_enabled);
++
++ pl->ops->mac_config(pl->netdev, pl->link_an_mode, state);
++}
++
++static void phylink_mac_an_restart(struct phylink *pl)
++{
++ if (pl->link_config.an_enabled)
++ pl->ops->mac_an_restart(pl->netdev, pl->link_an_mode);
++}
++
++static int phylink_get_mac_state(struct phylink *pl, struct phylink_link_state *state)
++{
++ struct net_device *ndev = pl->netdev;
++
++ linkmode_copy(state->advertising, pl->link_config.advertising);
++ linkmode_zero(state->lp_advertising);
++ state->an_enabled = pl->link_config.an_enabled;
++ state->link = 1;
++
++ return pl->ops->mac_link_state(ndev, state);
++}
++
++/* The fixed state is... fixed except for the link state,
++ * which may be determined by a GPIO.
++ */
++static void phylink_get_fixed_state(struct phylink *pl, struct phylink_link_state *state)
++{
++ *state = pl->link_config;
++ if (pl->link_gpio)
++ state->link = !!gpiod_get_value(pl->link_gpio);
++}
++
++static void phylink_resolve(struct work_struct *w)
++{
++ struct phylink *pl = container_of(w, struct phylink, resolve);
++ struct phylink_link_state link_state;
++ struct net_device *ndev = pl->netdev;
++
++ mutex_lock(&pl->state_mutex);
++ if (pl->phylink_disable_state) {
++ link_state.link = false;
++ } else {
++ switch (pl->link_an_mode) {
++ case MLO_AN_PHY:
++ link_state = pl->phy_state;
++ break;
++
++ case MLO_AN_FIXED:
++ phylink_get_fixed_state(pl, &link_state);
++ break;
++
++ case MLO_AN_SGMII:
++ phylink_get_mac_state(pl, &link_state);
++ if (pl->phydev)
++ link_state.link = link_state.link &&
++ pl->phy_state.link;
++ break;
++
++ case MLO_AN_8023Z:
++ phylink_get_mac_state(pl, &link_state);
++ break;
++ }
++ }
++
++ if (link_state.link != netif_carrier_ok(ndev)) {
++ if (!link_state.link) {
++ netif_carrier_off(ndev);
++ pl->ops->mac_link_down(ndev, pl->link_an_mode);
++ netdev_info(ndev, "Link is Down\n");
++ } else {
++ /* If we have a PHY, we need the MAC updated with
++ * the current link parameters (eg, in SGMII mode,
++ * with flow control status.)
++ */
++ if (pl->phydev)
++ phylink_mac_config(pl, &link_state);
++
++ pl->ops->mac_link_up(ndev, pl->link_an_mode);
++
++ netif_carrier_on(ndev);
++
++ netdev_info(ndev,
++ "Link is Up - %s/%s - flow control %s\n",
++ phy_speed_to_str(link_state.speed),
++ phy_duplex_to_str(link_state.duplex),
++ link_state.pause ? "rx/tx" : "off");
++ }
++ }
++ mutex_unlock(&pl->state_mutex);
++}
++
++static void phylink_run_resolve(struct phylink *pl)
++{
++ if (!pl->phylink_disable_state)
++ queue_work(system_power_efficient_wq, &pl->resolve);
++}
++
++struct phylink *phylink_create(struct net_device *ndev, struct device_node *np,
++ phy_interface_t iface, const struct phylink_mac_ops *ops)
++{
++ struct phylink *pl;
++ int ret;
++
++ pl = kzalloc(sizeof(*pl), GFP_KERNEL);
++ if (!pl)
++ return ERR_PTR(-ENOMEM);
++
++ mutex_init(&pl->state_mutex);
++ mutex_init(&pl->config_mutex);
++ INIT_WORK(&pl->resolve, phylink_resolve);
++ pl->netdev = ndev;
++ pl->link_interface = iface;
++ pl->link_port = PORT_MII;
++ pl->link_config.speed = SPEED_UNKNOWN;
++ pl->link_config.duplex = DUPLEX_UNKNOWN;
++ pl->ops = ops;
++ __set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
++
++ ret = phylink_parse_mode(pl, np);
++ if (ret < 0) {
++ kfree(pl);
++ return ERR_PTR(ret);
++ }
++
++ if (pl->link_an_mode == MLO_AN_FIXED) {
++ ret = phylink_parse_fixedlink(pl, np);
++ if (ret < 0) {
++ kfree(pl);
++ return ERR_PTR(ret);
++ }
++ }
++
++ phylink_set(pl->supported, MII);
++ phylink_init_advert(pl, pl->link_an_mode, pl->supported,
++ pl->link_config.advertising);
++
++ return pl;
++}
++EXPORT_SYMBOL_GPL(phylink_create);
++
++void phylink_destroy(struct phylink *pl)
++{
++ cancel_work_sync(&pl->resolve);
++ kfree(pl);
++}
++EXPORT_SYMBOL_GPL(phylink_destroy);
++
++void phylink_phy_change(struct phy_device *phydev, bool up, bool do_carrier)
++{
++ struct phylink *pl = phydev->phylink;
++
++ mutex_lock(&pl->state_mutex);
++ pl->phy_state.speed = phydev->speed;
++ pl->phy_state.duplex = phydev->duplex;
++ pl->phy_state.pause = MLO_PAUSE_NONE;
++ if (phydev->pause)
++ pl->phy_state.pause |= MLO_PAUSE_SYM;
++ if (phydev->asym_pause)
++ pl->phy_state.pause |= MLO_PAUSE_ASYM;
++ pl->phy_state.link = up;
++ mutex_unlock(&pl->state_mutex);
++
++ phylink_run_resolve(pl);
++
++ netdev_dbg(pl->netdev, "phy link %s %s/%s\n", up ? "up" : "down",
++ phy_speed_to_str(phydev->speed),
++ phy_duplex_to_str(phydev->duplex));
++}
++
++static int phylink_empty_linkmode(const unsigned long *linkmode)
++{
++ __ETHTOOL_DECLARE_LINK_MODE_MASK(tmp) = { 0, };
++
++ phylink_set_port_bits(tmp);
++ phylink_set(tmp, Autoneg);
++ phylink_set(tmp, Pause);
++ phylink_set(tmp, Asym_Pause);
++
++ bitmap_andnot(tmp, linkmode, tmp, __ETHTOOL_LINK_MODE_MASK_NBITS);
++
++ return linkmode_empty(tmp);
++}
++
++static int phylink_validate_support(struct phylink *pl, int mode,
++ unsigned long *mask)
++{
++ pl->ops->validate_support(pl->netdev, mode, mask);
++
++ return phylink_empty_linkmode(mask) ? -EINVAL : 0;
++}
++
++static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy)
++{
++ __ETHTOOL_DECLARE_LINK_MODE_MASK(mask);
++ u32 advertising;
++ int ret;
++
++ ethtool_convert_legacy_u32_to_link_mode(mask, phy->supported);
++ ret = phylink_validate_support(pl, pl->link_an_mode, mask);
++ if (ret)
++ return ret;
++
++ mutex_lock(&pl->config_mutex);
++ phy->phylink = pl;
++ phy->phy_link_change = phylink_phy_change;
++
++ netdev_info(pl->netdev,
++ "PHY [%s] driver [%s]\n", dev_name(&phy->mdio.dev),
++ phy->drv->name);
++
++ mutex_lock(&pl->state_mutex);
++ pl->phydev = phy;
++ linkmode_copy(pl->supported, mask);
++
++ /* Restrict the phy advertisment according to the MAC support. */
++ ethtool_convert_link_mode_to_legacy_u32(&advertising, mask);
++ phy->advertising &= ADVERTISED_INTERFACES | advertising;
++ ethtool_convert_legacy_u32_to_link_mode(pl->link_config.advertising,
++ phy->advertising);
++ mutex_unlock(&pl->state_mutex);
++
++ netdev_dbg(pl->netdev,
++ "phy: setting supported %*pb advertising 0x%08x\n",
++ __ETHTOOL_LINK_MODE_MASK_NBITS, pl->supported,
++ phy->advertising);
++
++ phy_start_machine(phy);
++ if (phy->irq > 0)
++ phy_start_interrupts(phy);
++
++ mutex_unlock(&pl->config_mutex);
++
++ return 0;
++}
++
++int phylink_connect_phy(struct phylink *pl, struct phy_device *phy)
++{
++ int ret;
++
++ ret = phy_attach_direct(pl->netdev, phy, 0, pl->link_interface);
++ if (ret)
++ return ret;
++
++ ret = phylink_bringup_phy(pl, phy);
++ if (ret)
++ phy_detach(phy);
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(phylink_connect_phy);
++
++int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn)
++{
++ struct device_node *phy_node;
++ struct phy_device *phy_dev;
++ int ret;
++
++ /* Fixed links are handled without needing a PHY */
++ if (pl->link_an_mode == MLO_AN_FIXED)
++ return 0;
++
++ phy_node = of_parse_phandle(dn, "phy-handle", 0);
++ if (!phy_node)
++ phy_node = of_parse_phandle(dn, "phy", 0);
++ if (!phy_node)
++ phy_node = of_parse_phandle(dn, "phy-device", 0);
++
++ if (!phy_node) {
++ if (pl->link_an_mode == MLO_AN_PHY) {
++ netdev_err(pl->netdev, "unable to find PHY node\n");
++ return -ENODEV;
++ }
++ return 0;
++ }
++
++ phy_dev = of_phy_attach(pl->netdev, phy_node, 0, pl->link_interface);
++ /* We're done with the phy_node handle */
++ of_node_put(phy_node);
++
++ if (!phy_dev)
++ return -ENODEV;
++
++ ret = phylink_bringup_phy(pl, phy_dev);
++ if (ret)
++ phy_detach(phy_dev);
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(phylink_of_phy_connect);
++
++void phylink_disconnect_phy(struct phylink *pl)
++{
++ struct phy_device *phy;
++
++ mutex_lock(&pl->config_mutex);
++ phy = pl->phydev;
++
++ mutex_lock(&pl->state_mutex);
++ pl->phydev = NULL;
++ mutex_unlock(&pl->state_mutex);
++ flush_work(&pl->resolve);
++
++ if (phy)
++ phy_disconnect(phy);
++
++ mutex_unlock(&pl->config_mutex);
++}
++EXPORT_SYMBOL_GPL(phylink_disconnect_phy);
++
++void phylink_mac_change(struct phylink *pl, bool up)
++{
++ phylink_run_resolve(pl);
++ netdev_dbg(pl->netdev, "mac link %s\n", up ? "up" : "down");
++}
++EXPORT_SYMBOL_GPL(phylink_mac_change);
++
++void phylink_start(struct phylink *pl)
++{
++ mutex_lock(&pl->config_mutex);
++
++ netdev_info(pl->netdev, "configuring for %s link mode\n",
++ phylink_an_mode_str(pl->link_an_mode));
++
++ /* Apply the link configuration to the MAC when starting. This allows
++ * a fixed-link to start with the correct parameters, and also
++ * ensures that we set the appropriate advertisment for Serdes links.
++ */
++ phylink_mac_config(pl, &pl->link_config);
++
++ clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
++ phylink_run_resolve(pl);
++
++ if (pl->phydev)
++ phy_start(pl->phydev);
++
++ mutex_unlock(&pl->config_mutex);
++}
++EXPORT_SYMBOL_GPL(phylink_start);
++
++void phylink_stop(struct phylink *pl)
++{
++ mutex_lock(&pl->config_mutex);
++
++ if (pl->phydev)
++ phy_stop(pl->phydev);
++
++ set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
++ flush_work(&pl->resolve);
++
++ mutex_unlock(&pl->config_mutex);
++}
++EXPORT_SYMBOL_GPL(phylink_stop);
++
++static void phylink_merge_link_mode(unsigned long *dst, const unsigned long *b)
++{
++ __ETHTOOL_DECLARE_LINK_MODE_MASK(mask);
++
++ linkmode_zero(mask);
++ phylink_set_port_bits(mask);
++
++ linkmode_and(dst, dst, mask);
++ linkmode_or(dst, dst, b);
++}
++
++static void phylink_get_ksettings(const struct phylink_link_state *state,
++ struct ethtool_link_ksettings *kset)
++{
++ phylink_merge_link_mode(kset->link_modes.advertising, state->advertising);
++ linkmode_copy(kset->link_modes.lp_advertising, state->lp_advertising);
++ kset->base.speed = state->speed;
++ kset->base.duplex = state->duplex;
++ kset->base.autoneg = state->an_enabled ? AUTONEG_ENABLE :
++ AUTONEG_DISABLE;
++}
++
++static int __phylink_ethtool_ksettings_get(struct phylink *pl,
++ struct ethtool_link_ksettings *kset)
++{
++ struct phylink_link_state link_state;
++ int ret;
++
++ if (pl->phydev) {
++ ret = phy_ethtool_ksettings_get(pl->phydev, kset);
++ if (ret)
++ return ret;
++ } else {
++ kset->base.port = pl->link_port;
++ }
++
++ linkmode_copy(kset->link_modes.supported, pl->supported);
++
++ switch (pl->link_an_mode) {
++ case MLO_AN_FIXED:
++ /* We are using fixed settings. Report these as the
++ * current link settings - and note that these also
++ * represent the supported speeds/duplex/pause modes.
++ */
++ phylink_get_fixed_state(pl, &link_state);
++ phylink_get_ksettings(&link_state, kset);
++ break;
++
++ case MLO_AN_SGMII:
++ /* If there is a phy attached, then use the reported
++ * settings from the phy with no modification.
++ */
++ if (pl->phydev)
++ break;
++
++ case MLO_AN_8023Z:
++ phylink_get_mac_state(pl, &link_state);
++
++ /* The MAC is reporting the link results from its own PCS
++ * layer via in-band status. Report these as the current
++ * link settings.
++ */
++ phylink_get_ksettings(&link_state, kset);
++ break;
++ }
++
++ return 0;
++}
++
++int phylink_ethtool_ksettings_get(struct phylink *pl,
++ struct ethtool_link_ksettings *kset)
++{
++ int ret;
++
++ mutex_lock(&pl->config_mutex);
++ ret = __phylink_ethtool_ksettings_get(pl, kset);
++ mutex_unlock(&pl->config_mutex);
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(phylink_ethtool_ksettings_get);
++
++static int __phylink_ethtool_ksettings_set(struct phylink *pl,
++ const struct ethtool_link_ksettings *kset)
++{
++ struct ethtool_link_ksettings our_kset = *kset;
++ int ret;
++
++ /* Mask out unsupported advertisments */
++ linkmode_and(our_kset.link_modes.advertising,
++ kset->link_modes.advertising, pl->supported);
++
++ if (pl->ops->validate_advert)
++ pl->ops->validate_advert(pl->netdev, pl->link_an_mode,
++ pl->supported,
++ our_kset.link_modes.advertising);
++
++ /* FIXME: should we reject autoneg if phy/mac does not support it? */
++
++ if (kset->base.autoneg == AUTONEG_DISABLE) {
++ const struct phy_setting *s;
++
++ /* Autonegotiation disabled, select a suitable speed and
++ * duplex.
++ */
++ s = phy_lookup_setting(kset->base.speed, kset->base.duplex,
++ pl->supported,
++ __ETHTOOL_LINK_MODE_MASK_NBITS, false);
++ if (!s)
++ return -EINVAL;
++
++ /* If we have a fixed link (as specified by firmware), refuse
++ * to change link parameters.
++ */
++ if (pl->link_an_mode == MLO_AN_FIXED &&
++ (s->speed != pl->link_config.speed ||
++ s->duplex != pl->link_config.duplex))
++ return -EINVAL;
++
++ our_kset.base.speed = s->speed;
++ our_kset.base.duplex = s->duplex;
++
++ __clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
++ our_kset.link_modes.advertising);
++ } else {
++ /* If we have a fixed link, refuse to enable autonegotiation */
++ if (pl->link_an_mode == MLO_AN_FIXED)
++ return -EINVAL;
++
++ /* Autonegotiation enabled, validate advertisment */
++ if (phylink_empty_linkmode(our_kset.link_modes.advertising))
++ return -EINVAL;
++
++ __set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
++ our_kset.link_modes.advertising);
++ }
++
++ /* If we have a PHY, configure the phy */
++ if (pl->phydev) {
++ ret = phy_ethtool_ksettings_set(pl->phydev, &our_kset);
++ if (ret)
++ return ret;
++ }
++
++ mutex_lock(&pl->state_mutex);
++ /* Configure the MAC to match the new settings */
++ linkmode_copy(pl->link_config.advertising, our_kset.link_modes.advertising);
++ pl->link_config.speed = our_kset.base.speed;
++ pl->link_config.duplex = our_kset.base.duplex;
++ pl->link_config.an_enabled = our_kset.base.autoneg != AUTONEG_DISABLE;
++
++ if (!test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) {
++ phylink_mac_config(pl, &pl->link_config);
++ phylink_mac_an_restart(pl);
++ }
++ mutex_unlock(&pl->state_mutex);
++
++ return ret;
++}
++
++int phylink_ethtool_ksettings_set(struct phylink *pl,
++ const struct ethtool_link_ksettings *kset)
++{
++ int ret;
++
++ if (kset->base.autoneg != AUTONEG_DISABLE &&
++ kset->base.autoneg != AUTONEG_ENABLE)
++ return -EINVAL;
++
++ mutex_lock(&pl->config_mutex);
++ ret = __phylink_ethtool_ksettings_set(pl, kset);
++ mutex_unlock(&pl->config_mutex);
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(phylink_ethtool_ksettings_set);
++
++/* This emulates MII registers for a fixed-mode phy operating as per the
++ * passed in state. "aneg" defines if we report negotiation is possible.
++ *
++ * FIXME: should deal with negotiation state too.
++ */
++static int phylink_mii_emul_read(struct net_device *ndev, unsigned int reg,
++ struct phylink_link_state *state, bool aneg)
++{
++ struct fixed_phy_status fs;
++ int val;
++
++ fs.link = state->link;
++ fs.speed = state->speed;
++ fs.duplex = state->duplex;
++ fs.pause = state->pause & MLO_PAUSE_SYM;
++ fs.asym_pause = state->pause & MLO_PAUSE_ASYM;
++
++ val = swphy_read_reg(reg, &fs);
++ if (reg == MII_BMSR) {
++ if (!state->an_complete)
++ val &= ~BMSR_ANEGCOMPLETE;
++ if (!aneg)
++ val &= ~BMSR_ANEGCAPABLE;
++ }
++ return val;
++}
++
++static int phylink_mii_read(struct phylink *pl, unsigned int phy_id,
++ unsigned int reg)
++{
++ struct phylink_link_state state;
++ int val = 0xffff;
++
++ /* PHYs only exist for MLO_AN_PHY and MLO_AN_SGMII */
++ if (pl->phydev)
++ return mdiobus_read(pl->phydev->mdio.bus, phy_id, reg);
++
++ switch (pl->link_an_mode) {
++ case MLO_AN_FIXED:
++ if (phy_id == 0) {
++ phylink_get_fixed_state(pl, &state);
++ val = phylink_mii_emul_read(pl->netdev, reg, &state,
++ true);
++ }
++ break;
++
++ case MLO_AN_PHY:
++ return -EOPNOTSUPP;
++
++ case MLO_AN_SGMII:
++ /* No phy, fall through to 8023z method */
++ case MLO_AN_8023Z:
++ if (phy_id == 0) {
++ val = phylink_get_mac_state(pl, &state);
++ if (val < 0)
++ return val;
++
++ val = phylink_mii_emul_read(pl->netdev, reg, &state,
++ true);
++ }
++ break;
++ }
++
++ return val & 0xffff;
++}
++
++static int phylink_mii_write(struct phylink *pl, unsigned int phy_id,
++ unsigned int reg, unsigned int val)
++{
++ /* PHYs only exist for MLO_AN_PHY and MLO_AN_SGMII */
++ if (pl->phydev) {
++ mdiobus_write(pl->phydev->mdio.bus, phy_id, reg, val);
++ return 0;
++ }
++
++ switch (pl->link_an_mode) {
++ case MLO_AN_FIXED:
++ break;
++
++ case MLO_AN_PHY:
++ return -EOPNOTSUPP;
++
++ case MLO_AN_SGMII:
++ /* No phy, fall through to 8023z method */
++ case MLO_AN_8023Z:
++ break;
++ }
++
++ return 0;
++}
++
++int phylink_mii_ioctl(struct phylink *pl, struct ifreq *ifr, int cmd)
++{
++ struct mii_ioctl_data *mii_data = if_mii(ifr);
++ int val, ret;
++
++ mutex_lock(&pl->config_mutex);
++
++ switch (cmd) {
++ case SIOCGMIIPHY:
++ mii_data->phy_id = pl->phydev ? pl->phydev->mdio.addr : 0;
++ /* fallthrough */
++
++ case SIOCGMIIREG:
++ val = phylink_mii_read(pl, mii_data->phy_id, mii_data->reg_num);
++ if (val < 0) {
++ ret = val;
++ } else {
++ mii_data->val_out = val;
++ ret = 0;
++ }
++ break;
++
++ case SIOCSMIIREG:
++ ret = phylink_mii_write(pl, mii_data->phy_id, mii_data->reg_num,
++ mii_data->val_in);
++ break;
++
++ default:
++ ret = -EOPNOTSUPP;
++ if (pl->phydev)
++ ret = phy_mii_ioctl(pl->phydev, ifr, cmd);
++ break;
++ }
++
++ mutex_unlock(&pl->config_mutex);
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(phylink_mii_ioctl);
++
++MODULE_LICENSE("GPL");
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -153,6 +153,7 @@ static inline const char *phy_modes(phy_
+ #define MII_ADDR_C45 (1<<30)
+
+ struct device;
++struct phylink;
+ struct sk_buff;
+
+ /*
+@@ -422,6 +423,7 @@ struct phy_device {
+
+ struct mutex lock;
+
++ struct phylink *phylink;
+ struct net_device *attached_dev;
+
+ u8 mdix;
+--- /dev/null
++++ b/include/linux/phylink.h
+@@ -0,0 +1,100 @@
++#ifndef NETDEV_PCS_H
++#define NETDEV_PCS_H
++
++#include <linux/phy.h>
++#include <linux/spinlock.h>
++#include <linux/workqueue.h>
++
++struct device_node;
++struct ethtool_cmd;
++struct net_device;
++
++enum {
++ MLO_PAUSE_NONE,
++ MLO_PAUSE_ASYM = BIT(0),
++ MLO_PAUSE_SYM = BIT(1),
++
++ MLO_AN_PHY = 0,
++ MLO_AN_FIXED,
++ MLO_AN_SGMII,
++ MLO_AN_8023Z,
++};
++
++struct phylink_link_state {
++ __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
++ __ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising);
++ int speed;
++ int duplex;
++ int pause;
++ unsigned int link:1;
++ unsigned int an_enabled:1;
++ unsigned int an_complete:1;
++};
++
++struct phylink_mac_ops {
++ /**
++ * @validate_support:
++ *
++ * Validate and update the support mask provided by a PHY or
++ * module. Unsupported link modes should be cleared by the
++ * MAC.
++ *
++ * Note: the PHY may be able to transform from one connection
++ * technology to another, so, eg, don't clear 1000base-X just
++ * because the MAC is unable to support it. This is more about
++ * clearing unsupported speeds and duplex settings.
++ */
++ void (*validate_support)(struct net_device *, unsigned int mode,
++ unsigned long *support);
++
++ /**
++ * @validate_advert:
++ *
++ * Validate and update the advertisment mask, clearing bits that
++ * can not be advertised in the chosen mode or with each other.
++ */
++ void (*validate_advert)(struct net_device *, unsigned int mode,
++ const unsigned long *support,
++ unsigned long *advert);
++
++ /* Read the current link state from the hardware */
++ int (*mac_link_state)(struct net_device *, struct phylink_link_state *);
++
++ /* Configure the MAC */
++ void (*mac_config)(struct net_device *, unsigned int mode,
++ const struct phylink_link_state *);
++ void (*mac_an_restart)(struct net_device *, unsigned int mode);
++
++ void (*mac_link_down)(struct net_device *, unsigned int mode);
++ void (*mac_link_up)(struct net_device *, unsigned int mode);
++};
++
++struct phylink *phylink_create(struct net_device *, struct device_node *,
++ phy_interface_t iface, const struct phylink_mac_ops *ops);
++void phylink_destroy(struct phylink *);
++
++int phylink_connect_phy(struct phylink *, struct phy_device *);
++int phylink_of_phy_connect(struct phylink *, struct device_node *);
++void phylink_disconnect_phy(struct phylink *);
++
++void phylink_mac_change(struct phylink *, bool up);
++
++void phylink_start(struct phylink *);
++void phylink_stop(struct phylink *);
++
++int phylink_ethtool_ksettings_get(struct phylink *,
++ struct ethtool_link_ksettings *);
++int phylink_ethtool_ksettings_set(struct phylink *,
++ const struct ethtool_link_ksettings *);
++int phylink_mii_ioctl(struct phylink *, struct ifreq *, int);
++
++#define phylink_zero(bm) \
++ bitmap_zero(bm, __ETHTOOL_LINK_MODE_MASK_NBITS)
++#define __phylink_do_bit(op, bm, mode) \
++ op(ETHTOOL_LINK_MODE_ ## mode ## _BIT, bm)
++
++#define phylink_set(bm, mode) __phylink_do_bit(__set_bit, bm, mode)
++#define phylink_clear(bm, mode) __phylink_do_bit(__clear_bit, bm, mode)
++#define phylink_test(bm, mode) __phylink_do_bit(test_bit, bm, mode)
++
++#endif
diff --git a/target/linux/mvebu/patches-4.9/416-phylink-add-hooks-for-SFP-support.patch b/target/linux/mvebu/patches-4.9/416-phylink-add-hooks-for-SFP-support.patch
new file mode 100644
index 0000000000..da44f75dbe
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/416-phylink-add-hooks-for-SFP-support.patch
@@ -0,0 +1,177 @@
+From: Russell King <rmk+kernel@arm.linux.org.uk>
+Date: Thu, 24 Sep 2015 11:01:13 +0100
+Subject: [PATCH] phylink: add hooks for SFP support
+
+Add support to phylink for SFP, which needs to control and configure
+the ethernet MAC link state. Specifically, SFP needs to:
+
+1. set the negotiation mode between SGMII and 1000base-X
+2. attach and detach the module PHY
+3. prevent the link coming up when errors are reported
+
+In the absence of a PHY, we also need to set the ethtool port type
+according to the module plugged in.
+
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
+
+- rework phylink_set_link_*(), combining into a single function.
+---
+
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -11,6 +11,7 @@
+ #include <linux/ethtool.h>
+ #include <linux/export.h>
+ #include <linux/gpio/consumer.h>
++#include <linux/list.h>
+ #include <linux/netdevice.h>
+ #include <linux/of.h>
+ #include <linux/of_mdio.h>
+@@ -29,11 +30,16 @@
+ (ADVERTISED_TP | ADVERTISED_MII | ADVERTISED_FIBRE | \
+ ADVERTISED_BNC | ADVERTISED_AUI | ADVERTISED_Backplane)
+
++static LIST_HEAD(phylinks);
++static DEFINE_MUTEX(phylink_mutex);
++
+ enum {
+ PHYLINK_DISABLE_STOPPED,
++ PHYLINK_DISABLE_LINK,
+ };
+
+ struct phylink {
++ struct list_head node;
+ struct net_device *netdev;
+ const struct phylink_mac_ops *ops;
+ struct mutex config_mutex;
+@@ -375,12 +381,20 @@ struct phylink *phylink_create(struct ne
+ phylink_init_advert(pl, pl->link_an_mode, pl->supported,
+ pl->link_config.advertising);
+
++ mutex_lock(&phylink_mutex);
++ list_add_tail(&pl->node, &phylinks);
++ mutex_unlock(&phylink_mutex);
++
+ return pl;
+ }
+ EXPORT_SYMBOL_GPL(phylink_create);
+
+ void phylink_destroy(struct phylink *pl)
+ {
++ mutex_lock(&phylink_mutex);
++ list_del(&pl->node);
++ mutex_unlock(&phylink_mutex);
++
+ cancel_work_sync(&pl->resolve);
+ kfree(pl);
+ }
+@@ -900,4 +914,93 @@ int phylink_mii_ioctl(struct phylink *pl
+ }
+ EXPORT_SYMBOL_GPL(phylink_mii_ioctl);
+
++
++
++void phylink_disable(struct phylink *pl)
++{
++ set_bit(PHYLINK_DISABLE_LINK, &pl->phylink_disable_state);
++ flush_work(&pl->resolve);
++
++ netif_carrier_off(pl->netdev);
++}
++EXPORT_SYMBOL_GPL(phylink_disable);
++
++void phylink_enable(struct phylink *pl)
++{
++ clear_bit(PHYLINK_DISABLE_LINK, &pl->phylink_disable_state);
++ phylink_run_resolve(pl);
++}
++EXPORT_SYMBOL_GPL(phylink_enable);
++
++int phylink_set_link(struct phylink *pl, unsigned int mode, u8 port,
++ const unsigned long *support)
++{
++ __ETHTOOL_DECLARE_LINK_MODE_MASK(mask);
++ int ret = 0;
++
++ netdev_dbg(pl->netdev, "requesting link mode %s with support %*pb\n",
++ phylink_an_mode_str(mode),
++ __ETHTOOL_LINK_MODE_MASK_NBITS, support);
++
++ if (mode == MLO_AN_FIXED)
++ return -EINVAL;
++
++ linkmode_copy(mask, support);
++
++ /* Ignore errors if we're expecting a PHY to attach later */
++ ret = phylink_validate_support(pl, mode, mask);
++ if (ret && mode != MLO_AN_PHY)
++ return ret;
++
++ mutex_lock(&pl->config_mutex);
++ if (mode == MLO_AN_8023Z && pl->phydev) {
++ ret = -EINVAL;
++ } else {
++ bool changed = !bitmap_equal(pl->supported, mask,
++ __ETHTOOL_LINK_MODE_MASK_NBITS);
++ if (changed) {
++ linkmode_copy(pl->supported, mask);
++
++ phylink_init_advert(pl, mode, mask,
++ pl->link_config.advertising);
++ }
++
++ if (pl->link_an_mode != mode) {
++ pl->link_an_mode = mode;
++
++ changed = true;
++
++ netdev_info(pl->netdev, "switched to %s link mode\n",
++ phylink_an_mode_str(mode));
++ }
++
++ pl->link_port = port;
++
++ if (changed && !test_bit(PHYLINK_DISABLE_STOPPED,
++ &pl->phylink_disable_state))
++ phylink_mac_config(pl, &pl->link_config);
++ }
++ mutex_unlock(&pl->config_mutex);
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(phylink_set_link);
++
++struct phylink *phylink_lookup_by_netdev(struct net_device *ndev)
++{
++ struct phylink *pl, *found = NULL;
++
++ mutex_lock(&phylink_mutex);
++ list_for_each_entry(pl, &phylinks, node)
++ if (pl->netdev == ndev) {
++ found = pl;
++ break;
++ }
++
++ mutex_unlock(&phylink_mutex);
++
++ return found;
++}
++EXPORT_SYMBOL_GPL(phylink_lookup_by_netdev);
++
+ MODULE_LICENSE("GPL");
+--- a/include/linux/phylink.h
++++ b/include/linux/phylink.h
+@@ -88,6 +88,12 @@ int phylink_ethtool_ksettings_set(struct
+ const struct ethtool_link_ksettings *);
+ int phylink_mii_ioctl(struct phylink *, struct ifreq *, int);
+
++int phylink_set_link(struct phylink *pl, unsigned int mode, u8 port,
++ const unsigned long *support);
++void phylink_disable(struct phylink *pl);
++void phylink_enable(struct phylink *pl);
++struct phylink *phylink_lookup_by_netdev(struct net_device *ndev);
++
+ #define phylink_zero(bm) \
+ bitmap_zero(bm, __ETHTOOL_LINK_MODE_MASK_NBITS)
+ #define __phylink_do_bit(op, bm, mode) \
diff --git a/target/linux/mvebu/patches-4.9/417-sfp-add-phylink-based-SFP-module-support.patch b/target/linux/mvebu/patches-4.9/417-sfp-add-phylink-based-SFP-module-support.patch
new file mode 100644
index 0000000000..4abefe6236
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/417-sfp-add-phylink-based-SFP-module-support.patch
@@ -0,0 +1,1477 @@
+From: Russell King <rmk+kernel@arm.linux.org.uk>
+Date: Sat, 12 Sep 2015 18:43:39 +0100
+Subject: [PATCH] sfp: add phylink based SFP module support
+
+Add support for SFP hotpluggable modules via phylink. This supports
+both copper and optical SFP modules, which require different Serdes
+modes in order to properly negotiate the link.
+
+Optical SFP modules typically require the Serdes link to be talking
+1000base-X mode - this is the gigabit ethernet mode defined by the
+802.3 standard.
+
+Copper SFP modules typically integrate a PHY in the module to convert
+from Serdes to copper, and the PHY will be configured by the vendor
+to either present a 1000base-X Serdes link (for fixed 1000base-T) or
+a SGMII Serdes link. However, this is vendor defined, so we instead
+detect the PHY, switch the link to SGMII mode, and use traditional
+PHY based negotiation.
+
+Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
+
+- set port and port capability depending on connector type
+- move autoneg mode setting to probe function
+- set "supported" speed capabilities depending on reported ethernet
+ capabilities
+- checks for short read
+- dump eeprom base ID when checksum fails
+---
+ create mode 100644 drivers/net/phy/sfp.c
+ create mode 100644 include/linux/sfp.h
+
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -256,6 +256,11 @@ endif # RTL8366_SMI
+
+ comment "MII PHY device drivers"
+
++config SFP
++ tristate "SFP cage support"
++ depends on I2C && PHYLINK
++ select MDIO_I2C
++
+ config AMD_PHY
+ tristate "AMD PHYs"
+ ---help---
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -41,6 +41,8 @@ obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o
+ obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o
+ obj-$(CONFIG_MDIO_XGENE) += mdio-xgene.o
+
++obj-$(CONFIG_SFP) += sfp.o
++
+ obj-$(CONFIG_AMD_PHY) += amd.o
+ obj-$(CONFIG_AQUANTIA_PHY) += aquantia.o
+ obj-$(CONFIG_AT803X_PHY) += at803x.o
+--- /dev/null
++++ b/drivers/net/phy/sfp.c
+@@ -0,0 +1,1071 @@
++#include <linux/delay.h>
++#include <linux/gpio.h>
++#include <linux/i2c.h>
++#include <linux/interrupt.h>
++#include <linux/jiffies.h>
++#include <linux/module.h>
++#include <linux/mutex.h>
++#include <linux/netdevice.h>
++#include <linux/of.h>
++#include <linux/of_net.h>
++#include <linux/phylink.h>
++#include <linux/platform_device.h>
++#include <linux/sfp.h>
++#include <linux/slab.h>
++#include <linux/workqueue.h>
++
++#include "mdio-i2c.h"
++#include "swphy.h"
++
++enum {
++ GPIO_MODDEF0,
++ GPIO_LOS,
++ GPIO_TX_FAULT,
++ GPIO_TX_DISABLE,
++ GPIO_RATE_SELECT,
++ GPIO_MAX,
++
++ SFP_F_PRESENT = BIT(GPIO_MODDEF0),
++ SFP_F_LOS = BIT(GPIO_LOS),
++ SFP_F_TX_FAULT = BIT(GPIO_TX_FAULT),
++ SFP_F_TX_DISABLE = BIT(GPIO_TX_DISABLE),
++ SFP_F_RATE_SELECT = BIT(GPIO_RATE_SELECT),
++
++ SFP_E_INSERT = 0,
++ SFP_E_REMOVE,
++ SFP_E_DEV_DOWN,
++ SFP_E_DEV_UP,
++ SFP_E_TX_FAULT,
++ SFP_E_TX_CLEAR,
++ SFP_E_LOS_HIGH,
++ SFP_E_LOS_LOW,
++ SFP_E_TIMEOUT,
++
++ SFP_MOD_EMPTY = 0,
++ SFP_MOD_PROBE,
++ SFP_MOD_PRESENT,
++ SFP_MOD_ERROR,
++
++ SFP_DEV_DOWN = 0,
++ SFP_DEV_UP,
++
++ SFP_S_DOWN = 0,
++ SFP_S_INIT,
++ SFP_S_WAIT_LOS,
++ SFP_S_LINK_UP,
++ SFP_S_TX_FAULT,
++ SFP_S_REINIT,
++ SFP_S_TX_DISABLE,
++};
++
++static const char *gpio_of_names[] = {
++ "moddef0",
++ "los",
++ "tx-fault",
++ "tx-disable",
++ "rate-select",
++};
++
++static const enum gpiod_flags gpio_flags[] = {
++ GPIOD_IN,
++ GPIOD_IN,
++ GPIOD_IN,
++ GPIOD_ASIS,
++ GPIOD_ASIS,
++};
++
++#define T_INIT_JIFFIES msecs_to_jiffies(300)
++#define T_RESET_US 10
++#define T_FAULT_RECOVER msecs_to_jiffies(1000)
++
++/* SFP module presence detection is poor: the three MOD DEF signals are
++ * the same length on the PCB, which means it's possible for MOD DEF 0 to
++ * connect before the I2C bus on MOD DEF 1/2.
++ *
++ * The SFP MSA specifies 300ms as t_init (the time taken for TX_FAULT to
++ * be deasserted) but makes no mention of the earliest time before we can
++ * access the I2C EEPROM. However, Avago modules require 300ms.
++ */
++#define T_PROBE_INIT msecs_to_jiffies(300)
++#define T_PROBE_RETRY msecs_to_jiffies(100)
++
++/*
++ * SFP modules appear to always have their PHY configured for bus address
++ * 0x56 (which with mdio-i2c, translates to a PHY address of 22).
++ */
++#define SFP_PHY_ADDR 22
++
++/*
++ * Give this long for the PHY to reset.
++ */
++#define T_PHY_RESET_MS 50
++
++static DEFINE_MUTEX(sfp_mutex);
++
++struct sfp {
++ struct device *dev;
++ struct i2c_adapter *i2c;
++ struct mii_bus *i2c_mii;
++ struct net_device *ndev;
++ struct phylink *phylink;
++ struct phy_device *mod_phy;
++
++ unsigned int (*get_state)(struct sfp *);
++ void (*set_state)(struct sfp *, unsigned int);
++ int (*read)(struct sfp *, bool, u8, void *, size_t);
++
++ struct gpio_desc *gpio[GPIO_MAX];
++
++ unsigned int state;
++ struct delayed_work poll;
++ struct delayed_work timeout;
++ struct mutex sm_mutex;
++ unsigned char sm_mod_state;
++ unsigned char sm_dev_state;
++ unsigned short sm_state;
++ unsigned int sm_retries;
++
++ struct sfp_eeprom_id id;
++
++ struct notifier_block netdev_nb;
++};
++
++static unsigned long poll_jiffies;
++
++static unsigned int sfp_gpio_get_state(struct sfp *sfp)
++{
++ unsigned int i, state, v;
++
++ for (i = state = 0; i < GPIO_MAX; i++) {
++ if (gpio_flags[i] != GPIOD_IN || !sfp->gpio[i])
++ continue;
++
++ v = gpiod_get_value_cansleep(sfp->gpio[i]);
++ if (v)
++ state |= BIT(i);
++ }
++
++ return state;
++}
++
++static void sfp_gpio_set_state(struct sfp *sfp, unsigned int state)
++{
++ if (state & SFP_F_PRESENT) {
++ /* If the module is present, drive the signals */
++ if (sfp->gpio[GPIO_TX_DISABLE])
++ gpiod_direction_output(sfp->gpio[GPIO_TX_DISABLE],
++ state & SFP_F_TX_DISABLE);
++ if (state & SFP_F_RATE_SELECT)
++ gpiod_direction_output(sfp->gpio[GPIO_RATE_SELECT],
++ state & SFP_F_RATE_SELECT);
++ } else {
++ /* Otherwise, let them float to the pull-ups */
++ if (sfp->gpio[GPIO_TX_DISABLE])
++ gpiod_direction_input(sfp->gpio[GPIO_TX_DISABLE]);
++ if (state & SFP_F_RATE_SELECT)
++ gpiod_direction_input(sfp->gpio[GPIO_RATE_SELECT]);
++ }
++}
++
++static int sfp__i2c_read(struct i2c_adapter *i2c, u8 bus_addr, u8 dev_addr,
++ void *buf, size_t len)
++{
++ struct i2c_msg msgs[2];
++ int ret;
++
++ msgs[0].addr = bus_addr;
++ msgs[0].flags = 0;
++ msgs[0].len = 1;
++ msgs[0].buf = &dev_addr;
++ msgs[1].addr = bus_addr;
++ msgs[1].flags = I2C_M_RD;
++ msgs[1].len = len;
++ msgs[1].buf = buf;
++
++ ret = i2c_transfer(i2c, msgs, ARRAY_SIZE(msgs));
++ if (ret < 0)
++ return ret;
++
++ return ret == ARRAY_SIZE(msgs) ? len : 0;
++}
++
++static int sfp_i2c_read(struct sfp *sfp, bool a2, u8 addr, void *buf,
++ size_t len)
++{
++ return sfp__i2c_read(sfp->i2c, a2 ? 0x51 : 0x50, addr, buf, len);
++}
++
++static int sfp_i2c_configure(struct sfp *sfp, struct i2c_adapter *i2c)
++{
++ struct mii_bus *i2c_mii;
++ int ret;
++
++ if (!i2c_check_functionality(i2c, I2C_FUNC_I2C))
++ return -EINVAL;
++
++ sfp->i2c = i2c;
++ sfp->read = sfp_i2c_read;
++
++ i2c_mii = mdio_i2c_alloc(sfp->dev, i2c);
++ if (IS_ERR(i2c_mii))
++ return PTR_ERR(i2c_mii);
++
++ i2c_mii->name = "SFP I2C Bus";
++ i2c_mii->phy_mask = ~0;
++
++ ret = mdiobus_register(i2c_mii);
++ if (ret < 0) {
++ mdiobus_free(i2c_mii);
++ return ret;
++ }
++
++ sfp->i2c_mii = i2c_mii;
++
++ return 0;
++}
++
++
++/* Interface */
++static unsigned int sfp_get_state(struct sfp *sfp)
++{
++ return sfp->get_state(sfp);
++}
++
++static void sfp_set_state(struct sfp *sfp, unsigned int state)
++{
++ sfp->set_state(sfp, state);
++}
++
++static int sfp_read(struct sfp *sfp, bool a2, u8 addr, void *buf, size_t len)
++{
++ return sfp->read(sfp, a2, addr, buf, len);
++}
++
++static unsigned int sfp_check(void *buf, size_t len)
++{
++ u8 *p, check;
++
++ for (p = buf, check = 0; len; p++, len--)
++ check += *p;
++
++ return check;
++}
++
++/* Helpers */
++static void sfp_module_tx_disable(struct sfp *sfp)
++{
++ dev_dbg(sfp->dev, "tx disable %u -> %u\n",
++ sfp->state & SFP_F_TX_DISABLE ? 1 : 0, 1);
++ sfp->state |= SFP_F_TX_DISABLE;
++ sfp_set_state(sfp, sfp->state);
++}
++
++static void sfp_module_tx_enable(struct sfp *sfp)
++{
++ dev_dbg(sfp->dev, "tx disable %u -> %u\n",
++ sfp->state & SFP_F_TX_DISABLE ? 1 : 0, 0);
++ sfp->state &= ~SFP_F_TX_DISABLE;
++ sfp_set_state(sfp, sfp->state);
++}
++
++static void sfp_module_tx_fault_reset(struct sfp *sfp)
++{
++ unsigned int state = sfp->state;
++
++ if (state & SFP_F_TX_DISABLE)
++ return;
++
++ sfp_set_state(sfp, state | SFP_F_TX_DISABLE);
++
++ udelay(T_RESET_US);
++
++ sfp_set_state(sfp, state);
++}
++
++/* SFP state machine */
++static void sfp_sm_set_timer(struct sfp *sfp, unsigned int timeout)
++{
++ if (timeout)
++ mod_delayed_work(system_power_efficient_wq, &sfp->timeout,
++ timeout);
++ else
++ cancel_delayed_work(&sfp->timeout);
++}
++
++static void sfp_sm_next(struct sfp *sfp, unsigned int state,
++ unsigned int timeout)
++{
++ sfp->sm_state = state;
++ sfp_sm_set_timer(sfp, timeout);
++}
++
++static void sfp_sm_ins_next(struct sfp *sfp, unsigned int state, unsigned int timeout)
++{
++ sfp->sm_mod_state = state;
++ sfp_sm_set_timer(sfp, timeout);
++}
++
++static void sfp_sm_phy_detach(struct sfp *sfp)
++{
++ phy_stop(sfp->mod_phy);
++ if (sfp->phylink)
++ phylink_disconnect_phy(sfp->phylink);
++ phy_device_remove(sfp->mod_phy);
++ phy_device_free(sfp->mod_phy);
++ sfp->mod_phy = NULL;
++}
++
++static void sfp_sm_probe_phy(struct sfp *sfp)
++{
++ struct phy_device *phy;
++ int err;
++
++ msleep(T_PHY_RESET_MS);
++
++ phy = mdiobus_scan(sfp->i2c_mii, SFP_PHY_ADDR);
++ if (IS_ERR(phy)) {
++ dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy));
++ return;
++ }
++ if (!phy) {
++ dev_info(sfp->dev, "no PHY detected\n");
++ return;
++ }
++
++ if (sfp->phylink) {
++ err = phylink_connect_phy(sfp->phylink, phy);
++ if (err) {
++ phy_device_remove(phy);
++ phy_device_free(phy);
++ dev_err(sfp->dev, "phylink_connect_phy failed: %d\n",
++ err);
++ return;
++ }
++ }
++
++ sfp->mod_phy = phy;
++ phy_start(phy);
++}
++
++static void sfp_sm_link_up(struct sfp *sfp)
++{
++ if (sfp->phylink)
++ phylink_enable(sfp->phylink);
++
++ sfp_sm_next(sfp, SFP_S_LINK_UP, 0);
++}
++
++static void sfp_sm_link_down(struct sfp *sfp)
++{
++ if (sfp->phylink)
++ phylink_disable(sfp->phylink);
++}
++
++static void sfp_sm_link_check_los(struct sfp *sfp)
++{
++ unsigned int los = sfp->state & SFP_F_LOS;
++
++ /* FIXME: what if neither SFP_OPTIONS_LOS_INVERTED nor
++ * SFP_OPTIONS_LOS_NORMAL are set? For now, we assume
++ * the same as SFP_OPTIONS_LOS_NORMAL set.
++ */
++ if (sfp->id.ext.options & SFP_OPTIONS_LOS_INVERTED)
++ los ^= SFP_F_LOS;
++
++ if (los)
++ sfp_sm_next(sfp, SFP_S_WAIT_LOS, 0);
++ else
++ sfp_sm_link_up(sfp);
++}
++
++static void sfp_sm_fault(struct sfp *sfp, bool warn)
++{
++ if (sfp->sm_retries && !--sfp->sm_retries) {
++ dev_err(sfp->dev, "module persistently indicates fault, disabling\n");
++ sfp_sm_next(sfp, SFP_S_TX_DISABLE, 0);
++ } else {
++ if (warn)
++ dev_err(sfp->dev, "module transmit fault indicated\n");
++
++ sfp_sm_next(sfp, SFP_S_TX_FAULT, T_FAULT_RECOVER);
++ }
++}
++
++static void sfp_sm_mod_init(struct sfp *sfp)
++{
++ sfp_module_tx_enable(sfp);
++
++ /* Wait t_init before indicating that the link is up, provided the
++ * current state indicates no TX_FAULT. If TX_FAULT clears before
++ * this time, that's fine too.
++ */
++ sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
++ sfp->sm_retries = 5;
++
++ if (sfp->phylink) {
++ /* Setting the serdes link mode is guesswork: there's no
++ * field in the EEPROM which indicates what mode should
++ * be used.
++ *
++ * If it's a gigabit-only fiber module, it probably does
++ * not have a PHY, so switch to 802.3z negotiation mode.
++ * Otherwise, switch to SGMII mode (which is required to
++ * support non-gigabit speeds) and probe for a PHY.
++ */
++ if (sfp->id.base.e1000_base_t ||
++ sfp->id.base.e100_base_lx ||
++ sfp->id.base.e100_base_fx)
++ sfp_sm_probe_phy(sfp);
++ }
++}
++
++static int sfp_sm_mod_probe(struct sfp *sfp)
++{
++ /* SFP module inserted - read I2C data */
++ struct sfp_eeprom_id id;
++ char vendor[17];
++ char part[17];
++ char sn[17];
++ char date[9];
++ char rev[5];
++ u8 check;
++ int err;
++
++ err = sfp_read(sfp, false, 0, &id, sizeof(id));
++ if (err < 0) {
++ dev_err(sfp->dev, "failed to read EEPROM: %d\n", err);
++ return -EAGAIN;
++ }
++
++ if (err != sizeof(id)) {
++ dev_err(sfp->dev, "EEPROM short read: %d\n", err);
++ return -EAGAIN;
++ }
++
++ /* Validate the checksum over the base structure */
++ check = sfp_check(&id.base, sizeof(id.base) - 1);
++ if (check != id.base.cc_base) {
++ dev_err(sfp->dev,
++ "EEPROM base structure checksum failure: 0x%02x\n",
++ check);
++ print_hex_dump(KERN_ERR, "sfp EE: ", DUMP_PREFIX_OFFSET,
++ 16, 1, &id, sizeof(id.base) - 1, true);
++ return -EINVAL;
++ }
++
++ check = sfp_check(&id.ext, sizeof(id.ext) - 1);
++ if (check != id.ext.cc_ext) {
++ dev_err(sfp->dev,
++ "EEPROM extended structure checksum failure: 0x%02x\n",
++ check);
++ memset(&id.ext, 0, sizeof(id.ext));
++ }
++
++ sfp->id = id;
++
++ memcpy(vendor, sfp->id.base.vendor_name, 16);
++ vendor[16] = '\0';
++ memcpy(part, sfp->id.base.vendor_pn, 16);
++ part[16] = '\0';
++ memcpy(rev, sfp->id.base.vendor_rev, 4);
++ rev[4] = '\0';
++ memcpy(sn, sfp->id.ext.vendor_sn, 16);
++ sn[16] = '\0';
++ memcpy(date, sfp->id.ext.datecode, 8);
++ date[8] = '\0';
++
++ dev_info(sfp->dev, "module %s %s rev %s sn %s dc %s\n", vendor, part, rev, sn, date);
++
++ /* We only support SFP modules, not the legacy GBIC modules. */
++ if (sfp->id.base.phys_id != SFP_PHYS_ID_SFP ||
++ sfp->id.base.phys_ext_id != SFP_PHYS_EXT_ID_SFP) {
++ dev_err(sfp->dev, "module is not SFP - phys id 0x%02x 0x%02x\n",
++ sfp->id.base.phys_id, sfp->id.base.phys_ext_id);
++ return -EINVAL;
++ }
++
++ /*
++ * What isn't clear from the SFP documentation is whether this
++ * specifies the encoding expected on the TD/RD lines, or whether
++ * the TD/RD lines are always 8b10b encoded, but the transceiver
++ * converts. Eg, think of a copper SFP supporting 1G/100M/10M
++ * ethernet: this requires 8b10b encoding for 1G, 4b5b for 100M,
++ * and manchester for 10M.
++ */
++ /* 1Gbit ethernet requires 8b10b encoding */
++ if (sfp->id.base.encoding != SFP_ENCODING_8B10B) {
++ dev_err(sfp->dev, "module does not support 8B10B encoding\n");
++ return -EINVAL;
++ }
++
++ if (sfp->phylink) {
++ __ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
++ int mode;
++ u8 port;
++
++ phylink_set(support, Autoneg);
++ phylink_set(support, Pause);
++ phylink_set(support, Asym_Pause);
++
++ /* Set ethtool support from the compliance fields. */
++ if (sfp->id.base.e10g_base_sr)
++ phylink_set(support, 10000baseSR_Full);
++ if (sfp->id.base.e10g_base_lr)
++ phylink_set(support, 10000baseLR_Full);
++ if (sfp->id.base.e10g_base_lrm)
++ phylink_set(support, 10000baseLRM_Full);
++ if (sfp->id.base.e10g_base_er)
++ phylink_set(support, 10000baseER_Full);
++ if (sfp->id.base.e1000_base_sx ||
++ sfp->id.base.e1000_base_lx ||
++ sfp->id.base.e1000_base_cx)
++ phylink_set(support, 1000baseX_Full);
++ if (sfp->id.base.e1000_base_t) {
++ phylink_set(support, 1000baseT_Half);
++ phylink_set(support, 1000baseT_Full);
++ }
++
++ /* port is the physical connector, set this from the
++ * connector field.
++ */
++ switch (sfp->id.base.connector) {
++ case SFP_CONNECTOR_SC:
++ case SFP_CONNECTOR_FIBERJACK:
++ case SFP_CONNECTOR_LC:
++ case SFP_CONNECTOR_MT_RJ:
++ case SFP_CONNECTOR_MU:
++ case SFP_CONNECTOR_OPTICAL_PIGTAIL:
++ phylink_set(support, FIBRE);
++ port = PORT_FIBRE;
++ break;
++
++ case SFP_CONNECTOR_RJ45:
++ phylink_set(support, TP);
++ port = PORT_TP;
++ break;
++
++ case SFP_CONNECTOR_UNSPEC:
++ if (sfp->id.base.e1000_base_t) {
++ phylink_set(support, TP);
++ port = PORT_TP;
++ break;
++ }
++ /* fallthrough */
++ case SFP_CONNECTOR_SG: /* guess */
++ case SFP_CONNECTOR_MPO_1X12:
++ case SFP_CONNECTOR_MPO_2X16:
++ case SFP_CONNECTOR_HSSDC_II:
++ case SFP_CONNECTOR_COPPER_PIGTAIL:
++ case SFP_CONNECTOR_NOSEPARATE:
++ case SFP_CONNECTOR_MXC_2X16:
++ default:
++ /* a guess at the supported link modes */
++ dev_warn(sfp->dev, "Guessing link modes, please report...\n");
++ phylink_set(support, 1000baseT_Half);
++ phylink_set(support, 1000baseT_Full);
++ port = PORT_OTHER;
++ break;
++ }
++
++ /* Setting the serdes link mode is guesswork: there's no
++ * field in the EEPROM which indicates what mode should
++ * be used.
++ *
++ * If it's a gigabit-only fiber module, it probably does
++ * not have a PHY, so switch to 802.3z negotiation mode.
++ * Otherwise, switch to SGMII mode (which is required to
++ * support non-gigabit speeds) and probe for a PHY.
++ */
++ if (!sfp->id.base.e1000_base_t &&
++ !sfp->id.base.e100_base_lx &&
++ !sfp->id.base.e100_base_fx) {
++ mode = MLO_AN_8023Z;
++ } else {
++ mode = MLO_AN_SGMII;
++ }
++
++ phylink_set_link(sfp->phylink, mode, port, support);
++ }
++
++ return 0;
++}
++
++static void sfp_sm_mod_remove(struct sfp *sfp)
++{
++ if (sfp->mod_phy)
++ sfp_sm_phy_detach(sfp);
++
++ sfp_module_tx_disable(sfp);
++
++ memset(&sfp->id, 0, sizeof(sfp->id));
++
++ dev_info(sfp->dev, "module removed\n");
++}
++
++static void sfp_sm_event(struct sfp *sfp, unsigned int event)
++{
++ mutex_lock(&sfp->sm_mutex);
++
++ dev_dbg(sfp->dev, "SM: enter %u:%u:%u event %u\n",
++ sfp->sm_mod_state, sfp->sm_dev_state, sfp->sm_state, event);
++
++ /* This state machine tracks the insert/remove state of
++ * the module, and handles probing the on-board EEPROM.
++ */
++ switch (sfp->sm_mod_state) {
++ default:
++ if (event == SFP_E_INSERT) {
++ sfp_module_tx_disable(sfp);
++ sfp_sm_ins_next(sfp, SFP_MOD_PROBE, T_PROBE_INIT);
++ }
++ break;
++
++ case SFP_MOD_PROBE:
++ if (event == SFP_E_REMOVE) {
++ sfp_sm_ins_next(sfp, SFP_MOD_EMPTY, 0);
++ } else if (event == SFP_E_TIMEOUT) {
++ int err = sfp_sm_mod_probe(sfp);
++
++ if (err == 0)
++ sfp_sm_ins_next(sfp, SFP_MOD_PRESENT, 0);
++ else if (err == -EAGAIN)
++ sfp_sm_set_timer(sfp, T_PROBE_RETRY);
++ else
++ sfp_sm_ins_next(sfp, SFP_MOD_ERROR, 0);
++ }
++ break;
++
++ case SFP_MOD_PRESENT:
++ case SFP_MOD_ERROR:
++ if (event == SFP_E_REMOVE) {
++ sfp_sm_mod_remove(sfp);
++ sfp_sm_ins_next(sfp, SFP_MOD_EMPTY, 0);
++ }
++ break;
++ }
++
++ /* This state machine tracks the netdev up/down state */
++ switch (sfp->sm_dev_state) {
++ default:
++ if (event == SFP_E_DEV_UP)
++ sfp->sm_dev_state = SFP_DEV_UP;
++ break;
++
++ case SFP_DEV_UP:
++ if (event == SFP_E_DEV_DOWN) {
++ /* If the module has a PHY, avoid raising TX disable
++ * as this resets the PHY. Otherwise, raise it to
++ * turn the laser off.
++ */
++ if (!sfp->mod_phy)
++ sfp_module_tx_disable(sfp);
++ sfp->sm_dev_state = SFP_DEV_DOWN;
++ }
++ break;
++ }
++
++ /* Some events are global */
++ if (sfp->sm_state != SFP_S_DOWN &&
++ (sfp->sm_mod_state != SFP_MOD_PRESENT ||
++ sfp->sm_dev_state != SFP_DEV_UP)) {
++ if (sfp->sm_state == SFP_S_LINK_UP &&
++ sfp->sm_dev_state == SFP_DEV_UP)
++ sfp_sm_link_down(sfp);
++ if (sfp->mod_phy)
++ sfp_sm_phy_detach(sfp);
++ sfp_sm_next(sfp, SFP_S_DOWN, 0);
++ mutex_unlock(&sfp->sm_mutex);
++ return;
++ }
++
++ /* The main state machine */
++ switch (sfp->sm_state) {
++ case SFP_S_DOWN:
++ if (sfp->sm_mod_state == SFP_MOD_PRESENT &&
++ sfp->sm_dev_state == SFP_DEV_UP)
++ sfp_sm_mod_init(sfp);
++ break;
++
++ case SFP_S_INIT:
++ if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT)
++ sfp_sm_fault(sfp, true);
++ else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR)
++ sfp_sm_link_check_los(sfp);
++ break;
++
++ case SFP_S_WAIT_LOS:
++ if (event == SFP_E_TX_FAULT)
++ sfp_sm_fault(sfp, true);
++ else if (event ==
++ (sfp->id.ext.options & SFP_OPTIONS_LOS_INVERTED ?
++ SFP_E_LOS_HIGH : SFP_E_LOS_LOW))
++ sfp_sm_link_up(sfp);
++ break;
++
++ case SFP_S_LINK_UP:
++ if (event == SFP_E_TX_FAULT) {
++ sfp_sm_link_down(sfp);
++ sfp_sm_fault(sfp, true);
++ } else if (event ==
++ (sfp->id.ext.options & SFP_OPTIONS_LOS_INVERTED ?
++ SFP_E_LOS_LOW : SFP_E_LOS_HIGH)) {
++ sfp_sm_link_down(sfp);
++ sfp_sm_next(sfp, SFP_S_WAIT_LOS, 0);
++ }
++ break;
++
++ case SFP_S_TX_FAULT:
++ if (event == SFP_E_TIMEOUT) {
++ sfp_module_tx_fault_reset(sfp);
++ sfp_sm_next(sfp, SFP_S_REINIT, T_INIT_JIFFIES);
++ }
++ break;
++
++ case SFP_S_REINIT:
++ if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT) {
++ sfp_sm_fault(sfp, false);
++ } else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
++ dev_info(sfp->dev, "module transmit fault recovered\n");
++ sfp_sm_link_check_los(sfp);
++ }
++ break;
++
++ case SFP_S_TX_DISABLE:
++ break;
++ }
++
++ dev_dbg(sfp->dev, "SM: exit %u:%u:%u\n",
++ sfp->sm_mod_state, sfp->sm_dev_state, sfp->sm_state);
++
++ mutex_unlock(&sfp->sm_mutex);
++}
++
++#if 0
++static int sfp_phy_module_info(struct phy_device *phy,
++ struct ethtool_modinfo *modinfo)
++{
++ struct sfp *sfp = phy->priv;
++
++ /* locking... and check module is present */
++
++ if (sfp->id.ext.sff8472_compliance) {
++ modinfo->type = ETH_MODULE_SFF_8472;
++ modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
++ } else {
++ modinfo->type = ETH_MODULE_SFF_8079;
++ modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
++ }
++ return 0;
++}
++
++static int sfp_phy_module_eeprom(struct phy_device *phy,
++ struct ethtool_eeprom *ee, u8 *data)
++{
++ struct sfp *sfp = phy->priv;
++ unsigned int first, last, len;
++ int ret;
++
++ if (ee->len == 0)
++ return -EINVAL;
++
++ first = ee->offset;
++ last = ee->offset + ee->len;
++ if (first < ETH_MODULE_SFF_8079_LEN) {
++ len = last;
++ if (len > ETH_MODULE_SFF_8079_LEN)
++ len = ETH_MODULE_SFF_8079_LEN;
++ len -= first;
++
++ ret = sfp->read(sfp, false, first, data, len);
++ if (ret < 0)
++ return ret;
++
++ first += len;
++ data += len;
++ }
++ if (first >= ETH_MODULE_SFF_8079_LEN && last > first) {
++ len = last - first;
++
++ ret = sfp->read(sfp, true, first, data, len);
++ if (ret < 0)
++ return ret;
++ }
++ return 0;
++}
++#endif
++
++static void sfp_timeout(struct work_struct *work)
++{
++ struct sfp *sfp = container_of(work, struct sfp, timeout.work);
++
++ sfp_sm_event(sfp, SFP_E_TIMEOUT);
++}
++
++static void sfp_check_state(struct sfp *sfp)
++{
++ unsigned int state, i, changed;
++
++ state = sfp_get_state(sfp);
++ changed = state ^ sfp->state;
++ changed &= SFP_F_PRESENT | SFP_F_LOS | SFP_F_TX_FAULT;
++
++ for (i = 0; i < GPIO_MAX; i++)
++ if (changed & BIT(i))
++ dev_dbg(sfp->dev, "%s %u -> %u\n", gpio_of_names[i],
++ !!(sfp->state & BIT(i)), !!(state & BIT(i)));
++
++ state |= sfp->state & (SFP_F_TX_DISABLE | SFP_F_RATE_SELECT);
++ sfp->state = state;
++
++ if (changed & SFP_F_PRESENT)
++ sfp_sm_event(sfp, state & SFP_F_PRESENT ?
++ SFP_E_INSERT : SFP_E_REMOVE);
++
++ if (changed & SFP_F_TX_FAULT)
++ sfp_sm_event(sfp, state & SFP_F_TX_FAULT ?
++ SFP_E_TX_FAULT : SFP_E_TX_CLEAR);
++
++ if (changed & SFP_F_LOS)
++ sfp_sm_event(sfp, state & SFP_F_LOS ?
++ SFP_E_LOS_HIGH : SFP_E_LOS_LOW);
++}
++
++static irqreturn_t sfp_irq(int irq, void *data)
++{
++ struct sfp *sfp = data;
++
++ sfp_check_state(sfp);
++
++ return IRQ_HANDLED;
++}
++
++static void sfp_poll(struct work_struct *work)
++{
++ struct sfp *sfp = container_of(work, struct sfp, poll.work);
++
++ sfp_check_state(sfp);
++ mod_delayed_work(system_wq, &sfp->poll, poll_jiffies);
++}
++
++static int sfp_netdev_notify(struct notifier_block *nb, unsigned long act, void *data)
++{
++ struct sfp *sfp = container_of(nb, struct sfp, netdev_nb);
++ struct netdev_notifier_info *info = data;
++ struct net_device *ndev = info->dev;
++
++ if (!sfp->ndev || ndev != sfp->ndev)
++ return NOTIFY_DONE;
++
++ switch (act) {
++ case NETDEV_UP:
++ sfp_sm_event(sfp, SFP_E_DEV_UP);
++ break;
++
++ case NETDEV_GOING_DOWN:
++ sfp_sm_event(sfp, SFP_E_DEV_DOWN);
++ break;
++
++ case NETDEV_UNREGISTER:
++ if (sfp->mod_phy && sfp->phylink)
++ phylink_disconnect_phy(sfp->phylink);
++ sfp->phylink = NULL;
++ dev_put(sfp->ndev);
++ sfp->ndev = NULL;
++ break;
++ }
++ return NOTIFY_OK;
++}
++
++static struct sfp *sfp_alloc(struct device *dev)
++{
++ struct sfp *sfp;
++
++ sfp = kzalloc(sizeof(*sfp), GFP_KERNEL);
++ if (!sfp)
++ return ERR_PTR(-ENOMEM);
++
++ sfp->dev = dev;
++
++ mutex_init(&sfp->sm_mutex);
++ INIT_DELAYED_WORK(&sfp->poll, sfp_poll);
++ INIT_DELAYED_WORK(&sfp->timeout, sfp_timeout);
++
++ sfp->netdev_nb.notifier_call = sfp_netdev_notify;
++
++ return sfp;
++}
++
++static void sfp_destroy(struct sfp *sfp)
++{
++ cancel_delayed_work_sync(&sfp->poll);
++ cancel_delayed_work_sync(&sfp->timeout);
++ if (sfp->i2c_mii) {
++ mdiobus_unregister(sfp->i2c_mii);
++ mdiobus_free(sfp->i2c_mii);
++ }
++ if (sfp->i2c)
++ i2c_put_adapter(sfp->i2c);
++ of_node_put(sfp->dev->of_node);
++ kfree(sfp);
++}
++
++static void sfp_cleanup(void *data)
++{
++ struct sfp *sfp = data;
++
++ sfp_destroy(sfp);
++}
++
++static int sfp_probe(struct platform_device *pdev)
++{
++ struct sfp *sfp;
++ bool poll = false;
++ int irq, err, i;
++
++ sfp = sfp_alloc(&pdev->dev);
++ if (IS_ERR(sfp))
++ return PTR_ERR(sfp);
++
++ platform_set_drvdata(pdev, sfp);
++
++ err = devm_add_action(sfp->dev, sfp_cleanup, sfp);
++ if (err < 0)
++ return err;
++
++ if (pdev->dev.of_node) {
++ struct device_node *node = pdev->dev.of_node;
++ struct device_node *np;
++
++ np = of_parse_phandle(node, "i2c-bus", 0);
++ if (np) {
++ struct i2c_adapter *i2c;
++
++ i2c = of_find_i2c_adapter_by_node(np);
++ of_node_put(np);
++ if (!i2c)
++ return -EPROBE_DEFER;
++
++ err = sfp_i2c_configure(sfp, i2c);
++ if (err < 0) {
++ i2c_put_adapter(i2c);
++ return err;
++ }
++ }
++
++ for (i = 0; i < GPIO_MAX; i++) {
++ sfp->gpio[i] = devm_gpiod_get_optional(sfp->dev,
++ gpio_of_names[i], gpio_flags[i]);
++ if (IS_ERR(sfp->gpio[i]))
++ return PTR_ERR(sfp->gpio[i]);
++ }
++
++ sfp->get_state = sfp_gpio_get_state;
++ sfp->set_state = sfp_gpio_set_state;
++
++ np = of_parse_phandle(node, "sfp,ethernet", 0);
++ if (!np) {
++ dev_err(sfp->dev, "missing sfp,ethernet property\n");
++ return -EINVAL;
++ }
++
++ sfp->ndev = of_find_net_device_by_node(np);
++ if (!sfp->ndev) {
++ dev_err(sfp->dev, "ethernet device not found\n");
++ return -EPROBE_DEFER;
++ }
++
++ dev_hold(sfp->ndev);
++ put_device(&sfp->ndev->dev);
++
++ sfp->phylink = phylink_lookup_by_netdev(sfp->ndev);
++ if (!sfp->phylink) {
++ dev_err(sfp->dev, "phylink for %s not found\n",
++ netdev_name(sfp->ndev));
++ return -EPROBE_DEFER;
++ }
++
++ phylink_disable(sfp->phylink);
++ }
++
++ sfp->state = sfp_get_state(sfp);
++ if (sfp->gpio[GPIO_TX_DISABLE] &&
++ gpiod_get_value_cansleep(sfp->gpio[GPIO_TX_DISABLE]))
++ sfp->state |= SFP_F_TX_DISABLE;
++ if (sfp->gpio[GPIO_RATE_SELECT] &&
++ gpiod_get_value_cansleep(sfp->gpio[GPIO_RATE_SELECT]))
++ sfp->state |= SFP_F_RATE_SELECT;
++ sfp_set_state(sfp, sfp->state);
++ sfp_module_tx_disable(sfp);
++ if (sfp->state & SFP_F_PRESENT)
++ sfp_sm_event(sfp, SFP_E_INSERT);
++
++ for (i = 0; i < GPIO_MAX; i++) {
++ if (gpio_flags[i] != GPIOD_IN || !sfp->gpio[i])
++ continue;
++
++ irq = gpiod_to_irq(sfp->gpio[i]);
++ if (!irq) {
++ poll = true;
++ continue;
++ }
++
++ err = devm_request_threaded_irq(sfp->dev, irq, NULL, sfp_irq,
++ IRQF_ONESHOT |
++ IRQF_TRIGGER_RISING |
++ IRQF_TRIGGER_FALLING,
++ dev_name(sfp->dev), sfp);
++ if (err)
++ poll = true;
++ }
++
++ if (poll)
++ mod_delayed_work(system_wq, &sfp->poll, poll_jiffies);
++
++ register_netdevice_notifier(&sfp->netdev_nb);
++
++ return 0;
++}
++
++static int sfp_remove(struct platform_device *pdev)
++{
++ struct sfp *sfp = platform_get_drvdata(pdev);
++
++ unregister_netdevice_notifier(&sfp->netdev_nb);
++ if (sfp->ndev)
++ dev_put(sfp->ndev);
++
++ return 0;
++}
++
++static const struct of_device_id sfp_of_match[] = {
++ { .compatible = "sff,sfp", },
++ { },
++};
++MODULE_DEVICE_TABLE(of, sfp_of_match);
++
++static struct platform_driver sfp_driver = {
++ .probe = sfp_probe,
++ .remove = sfp_remove,
++ .driver = {
++ .name = "sfp",
++ .of_match_table = sfp_of_match,
++ },
++};
++
++static int sfp_init(void)
++{
++ poll_jiffies = msecs_to_jiffies(100);
++
++ return platform_driver_register(&sfp_driver);
++}
++module_init(sfp_init);
++
++static void sfp_exit(void)
++{
++ platform_driver_unregister(&sfp_driver);
++}
++module_exit(sfp_exit);
++
++MODULE_ALIAS("platform:sfp");
++MODULE_AUTHOR("Russell King");
++MODULE_LICENSE("GPL v2");
+--- /dev/null
++++ b/include/linux/sfp.h
+@@ -0,0 +1,344 @@
++#ifndef LINUX_SFP_H
++#define LINUX_SFP_H
++
++struct __packed sfp_eeprom_base {
++ u8 phys_id;
++ u8 phys_ext_id;
++ u8 connector;
++#if defined __BIG_ENDIAN_BITFIELD
++ u8 e10g_base_er:1;
++ u8 e10g_base_lrm:1;
++ u8 e10g_base_lr:1;
++ u8 e10g_base_sr:1;
++ u8 if_1x_sx:1;
++ u8 if_1x_lx:1;
++ u8 if_1x_copper_active:1;
++ u8 if_1x_copper_passive:1;
++
++ u8 escon_mmf_1310_led:1;
++ u8 escon_smf_1310_laser:1;
++ u8 sonet_oc192_short_reach:1;
++ u8 sonet_reach_bit1:1;
++ u8 sonet_reach_bit2:1;
++ u8 sonet_oc48_long_reach:1;
++ u8 sonet_oc48_intermediate_reach:1;
++ u8 sonet_oc48_short_reach:1;
++
++ u8 unallocated_5_7:1;
++ u8 sonet_oc12_smf_long_reach:1;
++ u8 sonet_oc12_smf_intermediate_reach:1;
++ u8 sonet_oc12_short_reach:1;
++ u8 unallocated_5_3:1;
++ u8 sonet_oc3_smf_long_reach:1;
++ u8 sonet_oc3_smf_intermediate_reach:1;
++ u8 sonet_oc3_short_reach:1;
++
++ u8 e_base_px:1;
++ u8 e_base_bx10:1;
++ u8 e100_base_fx:1;
++ u8 e100_base_lx:1;
++ u8 e1000_base_t:1;
++ u8 e1000_base_cx:1;
++ u8 e1000_base_lx:1;
++ u8 e1000_base_sx:1;
++
++ u8 fc_ll_v:1;
++ u8 fc_ll_s:1;
++ u8 fc_ll_i:1;
++ u8 fc_ll_l:1;
++ u8 fc_ll_m:1;
++ u8 fc_tech_sa:1;
++ u8 fc_tech_lc:1;
++ u8 fc_tech_electrical_inter_enclosure:1;
++
++ u8 fc_tech_electrical_intra_enclosure:1;
++ u8 fc_tech_sn:1;
++ u8 fc_tech_sl:1;
++ u8 fc_tech_ll:1;
++ u8 sfp_ct_active:1;
++ u8 sfp_ct_passive:1;
++ u8 unallocated_8_1:1;
++ u8 unallocated_8_0:1;
++
++ u8 fc_media_tw:1;
++ u8 fc_media_tp:1;
++ u8 fc_media_mi:1;
++ u8 fc_media_tv:1;
++ u8 fc_media_m6:1;
++ u8 fc_media_m5:1;
++ u8 unallocated_9_1:1;
++ u8 fc_media_sm:1;
++
++ u8 fc_speed_1200:1;
++ u8 fc_speed_800:1;
++ u8 fc_speed_1600:1;
++ u8 fc_speed_400:1;
++ u8 fc_speed_3200:1;
++ u8 fc_speed_200:1;
++ u8 unallocated_10_1:1;
++ u8 fc_speed_100:1;
++#elif defined __LITTLE_ENDIAN_BITFIELD
++ u8 if_1x_copper_passive:1;
++ u8 if_1x_copper_active:1;
++ u8 if_1x_lx:1;
++ u8 if_1x_sx:1;
++ u8 e10g_base_sr:1;
++ u8 e10g_base_lr:1;
++ u8 e10g_base_lrm:1;
++ u8 e10g_base_er:1;
++
++ u8 sonet_oc3_short_reach:1;
++ u8 sonet_oc3_smf_intermediate_reach:1;
++ u8 sonet_oc3_smf_long_reach:1;
++ u8 unallocated_5_3:1;
++ u8 sonet_oc12_short_reach:1;
++ u8 sonet_oc12_smf_intermediate_reach:1;
++ u8 sonet_oc12_smf_long_reach:1;
++ u8 unallocated_5_7:1;
++
++ u8 sonet_oc48_short_reach:1;
++ u8 sonet_oc48_intermediate_reach:1;
++ u8 sonet_oc48_long_reach:1;
++ u8 sonet_reach_bit2:1;
++ u8 sonet_reach_bit1:1;
++ u8 sonet_oc192_short_reach:1;
++ u8 escon_smf_1310_laser:1;
++ u8 escon_mmf_1310_led:1;
++
++ u8 e1000_base_sx:1;
++ u8 e1000_base_lx:1;
++ u8 e1000_base_cx:1;
++ u8 e1000_base_t:1;
++ u8 e100_base_lx:1;
++ u8 e100_base_fx:1;
++ u8 e_base_bx10:1;
++ u8 e_base_px:1;
++
++ u8 fc_tech_electrical_inter_enclosure:1;
++ u8 fc_tech_lc:1;
++ u8 fc_tech_sa:1;
++ u8 fc_ll_m:1;
++ u8 fc_ll_l:1;
++ u8 fc_ll_i:1;
++ u8 fc_ll_s:1;
++ u8 fc_ll_v:1;
++
++ u8 unallocated_8_0:1;
++ u8 unallocated_8_1:1;
++ u8 sfp_ct_passive:1;
++ u8 sfp_ct_active:1;
++ u8 fc_tech_ll:1;
++ u8 fc_tech_sl:1;
++ u8 fc_tech_sn:1;
++ u8 fc_tech_electrical_intra_enclosure:1;
++
++ u8 fc_media_sm:1;
++ u8 unallocated_9_1:1;
++ u8 fc_media_m5:1;
++ u8 fc_media_m6:1;
++ u8 fc_media_tv:1;
++ u8 fc_media_mi:1;
++ u8 fc_media_tp:1;
++ u8 fc_media_tw:1;
++
++ u8 fc_speed_100:1;
++ u8 unallocated_10_1:1;
++ u8 fc_speed_200:1;
++ u8 fc_speed_3200:1;
++ u8 fc_speed_400:1;
++ u8 fc_speed_1600:1;
++ u8 fc_speed_800:1;
++ u8 fc_speed_1200:1;
++#else
++#error Unknown Endian
++#endif
++ u8 encoding;
++ u8 br_nominal;
++ u8 rate_id;
++ u8 link_len[6];
++ char vendor_name[16];
++ u8 reserved36;
++ char vendor_oui[3];
++ char vendor_pn[16];
++ char vendor_rev[4];
++ union {
++ __be16 optical_wavelength;
++ u8 cable_spec;
++ };
++ u8 reserved62;
++ u8 cc_base;
++};
++
++struct __packed sfp_eeprom_ext {
++ __be16 options;
++ u8 br_max;
++ u8 br_min;
++ char vendor_sn[16];
++ char datecode[8];
++ u8 diagmon;
++ u8 enhopts;
++ u8 sff8472_compliance;
++ u8 cc_ext;
++};
++
++struct __packed sfp_eeprom_id {
++ struct sfp_eeprom_base base;
++ struct sfp_eeprom_ext ext;
++};
++
++/* SFP EEPROM registers */
++enum {
++ SFP_PHYS_ID = 0x00,
++ SFP_PHYS_EXT_ID = 0x01,
++ SFP_CONNECTOR = 0x02,
++ SFP_COMPLIANCE = 0x03,
++ SFP_ENCODING = 0x0b,
++ SFP_BR_NOMINAL = 0x0c,
++ SFP_RATE_ID = 0x0d,
++ SFP_LINK_LEN_SM_KM = 0x0e,
++ SFP_LINK_LEN_SM_100M = 0x0f,
++ SFP_LINK_LEN_50UM_OM2_10M = 0x10,
++ SFP_LINK_LEN_62_5UM_OM1_10M = 0x11,
++ SFP_LINK_LEN_COPPER_1M = 0x12,
++ SFP_LINK_LEN_50UM_OM4_10M = 0x12,
++ SFP_LINK_LEN_50UM_OM3_10M = 0x13,
++ SFP_VENDOR_NAME = 0x14,
++ SFP_VENDOR_OUI = 0x25,
++ SFP_VENDOR_PN = 0x28,
++ SFP_VENDOR_REV = 0x38,
++ SFP_OPTICAL_WAVELENGTH_MSB = 0x3c,
++ SFP_OPTICAL_WAVELENGTH_LSB = 0x3d,
++ SFP_CABLE_SPEC = 0x3c,
++ SFP_CC_BASE = 0x3f,
++ SFP_OPTIONS = 0x40, /* 2 bytes, MSB, LSB */
++ SFP_BR_MAX = 0x42,
++ SFP_BR_MIN = 0x43,
++ SFP_VENDOR_SN = 0x44,
++ SFP_DATECODE = 0x54,
++ SFP_DIAGMON = 0x5c,
++ SFP_ENHOPTS = 0x5d,
++ SFP_SFF8472_COMPLIANCE = 0x5e,
++ SFP_CC_EXT = 0x5f,
++
++ SFP_PHYS_ID_SFP = 0x03,
++ SFP_PHYS_EXT_ID_SFP = 0x04,
++ SFP_CONNECTOR_UNSPEC = 0x00,
++ /* codes 01-05 not supportable on SFP, but some modules have single SC */
++ SFP_CONNECTOR_SC = 0x01,
++ SFP_CONNECTOR_FIBERJACK = 0x06,
++ SFP_CONNECTOR_LC = 0x07,
++ SFP_CONNECTOR_MT_RJ = 0x08,
++ SFP_CONNECTOR_MU = 0x09,
++ SFP_CONNECTOR_SG = 0x0a,
++ SFP_CONNECTOR_OPTICAL_PIGTAIL = 0x0b,
++ SFP_CONNECTOR_MPO_1X12 = 0x0c,
++ SFP_CONNECTOR_MPO_2X16 = 0x0d,
++ SFP_CONNECTOR_HSSDC_II = 0x20,
++ SFP_CONNECTOR_COPPER_PIGTAIL = 0x21,
++ SFP_CONNECTOR_RJ45 = 0x22,
++ SFP_CONNECTOR_NOSEPARATE = 0x23,
++ SFP_CONNECTOR_MXC_2X16 = 0x24,
++ SFP_ENCODING_UNSPEC = 0x00,
++ SFP_ENCODING_8B10B = 0x01,
++ SFP_ENCODING_4B5B = 0x02,
++ SFP_ENCODING_NRZ = 0x03,
++ SFP_ENCODING_MANCHESTER = 0x04,
++ SFP_OPTIONS_HIGH_POWER_LEVEL = BIT(13),
++ SFP_OPTIONS_PAGING_A2 = BIT(12),
++ SFP_OPTIONS_RETIMER = BIT(11),
++ SFP_OPTIONS_COOLED_XCVR = BIT(10),
++ SFP_OPTIONS_POWER_DECL = BIT(9),
++ SFP_OPTIONS_RX_LINEAR_OUT = BIT(8),
++ SFP_OPTIONS_RX_DECISION_THRESH = BIT(7),
++ SFP_OPTIONS_TUNABLE_TX = BIT(6),
++ SFP_OPTIONS_RATE_SELECT = BIT(5),
++ SFP_OPTIONS_TX_DISABLE = BIT(4),
++ SFP_OPTIONS_TX_FAULT = BIT(3),
++ SFP_OPTIONS_LOS_INVERTED = BIT(2),
++ SFP_OPTIONS_LOS_NORMAL = BIT(1),
++ SFP_DIAGMON_DDM = BIT(6),
++ SFP_DIAGMON_INT_CAL = BIT(5),
++ SFP_DIAGMON_EXT_CAL = BIT(4),
++ SFP_DIAGMON_RXPWR_AVG = BIT(3),
++ SFP_DIAGMON_ADDRMODE = BIT(2),
++ SFP_ENHOPTS_ALARMWARN = BIT(7),
++ SFP_ENHOPTS_SOFT_TX_DISABLE = BIT(6),
++ SFP_ENHOPTS_SOFT_TX_FAULT = BIT(5),
++ SFP_ENHOPTS_SOFT_RX_LOS = BIT(4),
++ SFP_ENHOPTS_SOFT_RATE_SELECT = BIT(3),
++ SFP_ENHOPTS_APP_SELECT_SFF8079 = BIT(2),
++ SFP_ENHOPTS_SOFT_RATE_SFF8431 = BIT(1),
++ SFP_SFF8472_COMPLIANCE_NONE = 0x00,
++ SFP_SFF8472_COMPLIANCE_REV9_3 = 0x01,
++ SFP_SFF8472_COMPLIANCE_REV9_5 = 0x02,
++ SFP_SFF8472_COMPLIANCE_REV10_2 = 0x03,
++ SFP_SFF8472_COMPLIANCE_REV10_4 = 0x04,
++ SFP_SFF8472_COMPLIANCE_REV11_0 = 0x05,
++ SFP_SFF8472_COMPLIANCE_REV11_3 = 0x06,
++ SFP_SFF8472_COMPLIANCE_REV11_4 = 0x07,
++ SFP_SFF8472_COMPLIANCE_REV12_0 = 0x08,
++};
++
++/* SFP Diagnostics */
++enum {
++ /* Alarm and warnings stored MSB at lower address then LSB */
++ SFP_TEMP_HIGH_ALARM = 0x00,
++ SFP_TEMP_LOW_ALARM = 0x02,
++ SFP_TEMP_HIGH_WARN = 0x04,
++ SFP_TEMP_LOW_WARN = 0x06,
++ SFP_VOLT_HIGH_ALARM = 0x08,
++ SFP_VOLT_LOW_ALARM = 0x0a,
++ SFP_VOLT_HIGH_WARN = 0x0c,
++ SFP_VOLT_LOW_WARN = 0x0e,
++ SFP_BIAS_HIGH_ALARM = 0x10,
++ SFP_BIAS_LOW_ALARM = 0x12,
++ SFP_BIAS_HIGH_WARN = 0x14,
++ SFP_BIAS_LOW_WARN = 0x16,
++ SFP_TXPWR_HIGH_ALARM = 0x18,
++ SFP_TXPWR_LOW_ALARM = 0x1a,
++ SFP_TXPWR_HIGH_WARN = 0x1c,
++ SFP_TXPWR_LOW_WARN = 0x1e,
++ SFP_RXPWR_HIGH_ALARM = 0x20,
++ SFP_RXPWR_LOW_ALARM = 0x22,
++ SFP_RXPWR_HIGH_WARN = 0x24,
++ SFP_RXPWR_LOW_WARN = 0x26,
++ SFP_LASER_TEMP_HIGH_ALARM = 0x28,
++ SFP_LASER_TEMP_LOW_ALARM = 0x2a,
++ SFP_LASER_TEMP_HIGH_WARN = 0x2c,
++ SFP_LASER_TEMP_LOW_WARN = 0x2e,
++ SFP_TEC_CUR_HIGH_ALARM = 0x30,
++ SFP_TEC_CUR_LOW_ALARM = 0x32,
++ SFP_TEC_CUR_HIGH_WARN = 0x34,
++ SFP_TEC_CUR_LOW_WARN = 0x36,
++ SFP_CAL_RXPWR4 = 0x38,
++ SFP_CAL_RXPWR3 = 0x3c,
++ SFP_CAL_RXPWR2 = 0x40,
++ SFP_CAL_RXPWR1 = 0x44,
++ SFP_CAL_RXPWR0 = 0x48,
++ SFP_CAL_TXI_SLOPE = 0x4c,
++ SFP_CAL_TXI_OFFSET = 0x4e,
++ SFP_CAL_TXPWR_SLOPE = 0x50,
++ SFP_CAL_TXPWR_OFFSET = 0x52,
++ SFP_CAL_T_SLOPE = 0x54,
++ SFP_CAL_T_OFFSET = 0x56,
++ SFP_CAL_V_SLOPE = 0x58,
++ SFP_CAL_V_OFFSET = 0x5a,
++ SFP_CHKSUM = 0x5f,
++
++ SFP_TEMP = 0x60,
++ SFP_VCC = 0x62,
++ SFP_TX_BIAS = 0x64,
++ SFP_TX_POWER = 0x66,
++ SFP_RX_POWER = 0x68,
++ SFP_LASER_TEMP = 0x6a,
++ SFP_TEC_CUR = 0x6c,
++
++ SFP_STATUS = 0x6e,
++ SFP_ALARM = 0x70,
++
++ SFP_EXT_STATUS = 0x76,
++ SFP_VSL = 0x78,
++ SFP_PAGE = 0x7f,
++};
++
++#endif
diff --git a/target/linux/mvebu/patches-4.9/418-sfp-display-SFP-module-information.patch b/target/linux/mvebu/patches-4.9/418-sfp-display-SFP-module-information.patch
new file mode 100644
index 0000000000..f0f2edae94
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/418-sfp-display-SFP-module-information.patch
@@ -0,0 +1,280 @@
+From: Russell King <rmk+kernel@arm.linux.org.uk>
+Date: Sun, 13 Sep 2015 01:06:31 +0100
+Subject: [PATCH] sfp: display SFP module information
+
+Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
+---
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -251,6 +251,182 @@ static unsigned int sfp_check(void *buf,
+ return check;
+ }
+
++static const char *sfp_link_len(char *buf, size_t size, unsigned int length,
++ unsigned int multiplier)
++{
++ if (length == 0)
++ return "unsupported/unspecified";
++
++ if (length == 255) {
++ *buf++ = '>';
++ size -= 1;
++ length -= 1;
++ }
++
++ length *= multiplier;
++
++ if (length >= 1000)
++ snprintf(buf, size, "%u.%0*ukm",
++ length / 1000,
++ multiplier > 100 ? 1 :
++ multiplier > 10 ? 2 : 3,
++ length % 1000);
++ else
++ snprintf(buf, size, "%um", length);
++
++ return buf;
++}
++
++struct bitfield {
++ unsigned int mask;
++ unsigned int val;
++ const char *str;
++};
++
++static const struct bitfield sfp_options[] = {
++ {
++ .mask = SFP_OPTIONS_HIGH_POWER_LEVEL,
++ .val = SFP_OPTIONS_HIGH_POWER_LEVEL,
++ .str = "hpl",
++ }, {
++ .mask = SFP_OPTIONS_PAGING_A2,
++ .val = SFP_OPTIONS_PAGING_A2,
++ .str = "paginga2",
++ }, {
++ .mask = SFP_OPTIONS_RETIMER,
++ .val = SFP_OPTIONS_RETIMER,
++ .str = "retimer",
++ }, {
++ .mask = SFP_OPTIONS_COOLED_XCVR,
++ .val = SFP_OPTIONS_COOLED_XCVR,
++ .str = "cooled",
++ }, {
++ .mask = SFP_OPTIONS_POWER_DECL,
++ .val = SFP_OPTIONS_POWER_DECL,
++ .str = "powerdecl",
++ }, {
++ .mask = SFP_OPTIONS_RX_LINEAR_OUT,
++ .val = SFP_OPTIONS_RX_LINEAR_OUT,
++ .str = "rxlinear",
++ }, {
++ .mask = SFP_OPTIONS_RX_DECISION_THRESH,
++ .val = SFP_OPTIONS_RX_DECISION_THRESH,
++ .str = "rxthresh",
++ }, {
++ .mask = SFP_OPTIONS_TUNABLE_TX,
++ .val = SFP_OPTIONS_TUNABLE_TX,
++ .str = "tunabletx",
++ }, {
++ .mask = SFP_OPTIONS_RATE_SELECT,
++ .val = SFP_OPTIONS_RATE_SELECT,
++ .str = "ratesel",
++ }, {
++ .mask = SFP_OPTIONS_TX_DISABLE,
++ .val = SFP_OPTIONS_TX_DISABLE,
++ .str = "txdisable",
++ }, {
++ .mask = SFP_OPTIONS_TX_FAULT,
++ .val = SFP_OPTIONS_TX_FAULT,
++ .str = "txfault",
++ }, {
++ .mask = SFP_OPTIONS_LOS_INVERTED,
++ .val = SFP_OPTIONS_LOS_INVERTED,
++ .str = "los-",
++ }, {
++ .mask = SFP_OPTIONS_LOS_NORMAL,
++ .val = SFP_OPTIONS_LOS_NORMAL,
++ .str = "los+",
++ }, { }
++};
++
++static const struct bitfield diagmon[] = {
++ {
++ .mask = SFP_DIAGMON_DDM,
++ .val = SFP_DIAGMON_DDM,
++ .str = "ddm",
++ }, {
++ .mask = SFP_DIAGMON_INT_CAL,
++ .val = SFP_DIAGMON_INT_CAL,
++ .str = "intcal",
++ }, {
++ .mask = SFP_DIAGMON_EXT_CAL,
++ .val = SFP_DIAGMON_EXT_CAL,
++ .str = "extcal",
++ }, {
++ .mask = SFP_DIAGMON_RXPWR_AVG,
++ .val = SFP_DIAGMON_RXPWR_AVG,
++ .str = "rxpwravg",
++ }, { }
++};
++
++static const char *sfp_bitfield(char *out, size_t outsz, const struct bitfield *bits, unsigned int val)
++{
++ char *p = out;
++ int n;
++
++ *p = '\0';
++ while (bits->mask) {
++ if ((val & bits->mask) == bits->val) {
++ n = snprintf(p, outsz, "%s%s",
++ out != p ? ", " : "",
++ bits->str);
++ if (n == outsz)
++ break;
++ p += n;
++ outsz -= n;
++ }
++ bits++;
++ }
++
++ return out;
++}
++
++static const char *sfp_connector(unsigned int connector)
++{
++ switch (connector) {
++ case SFP_CONNECTOR_UNSPEC:
++ return "unknown/unspecified";
++ case SFP_CONNECTOR_SC:
++ return "SC";
++ case SFP_CONNECTOR_FIBERJACK:
++ return "Fiberjack";
++ case SFP_CONNECTOR_LC:
++ return "LC";
++ case SFP_CONNECTOR_MT_RJ:
++ return "MT-RJ";
++ case SFP_CONNECTOR_MU:
++ return "MU";
++ case SFP_CONNECTOR_SG:
++ return "SG";
++ case SFP_CONNECTOR_OPTICAL_PIGTAIL:
++ return "Optical pigtail";
++ case SFP_CONNECTOR_HSSDC_II:
++ return "HSSDC II";
++ case SFP_CONNECTOR_COPPER_PIGTAIL:
++ return "Copper pigtail";
++ default:
++ return "unknown";
++ }
++}
++
++static const char *sfp_encoding(unsigned int encoding)
++{
++ switch (encoding) {
++ case SFP_ENCODING_UNSPEC:
++ return "unspecified";
++ case SFP_ENCODING_8B10B:
++ return "8b10b";
++ case SFP_ENCODING_4B5B:
++ return "4b5b";
++ case SFP_ENCODING_NRZ:
++ return "NRZ";
++ case SFP_ENCODING_MANCHESTER:
++ return "MANCHESTER";
++ default:
++ return "unknown";
++ }
++}
++
+ /* Helpers */
+ static void sfp_module_tx_disable(struct sfp *sfp)
+ {
+@@ -428,6 +604,7 @@ static int sfp_sm_mod_probe(struct sfp *
+ char sn[17];
+ char date[9];
+ char rev[5];
++ char options[80];
+ u8 check;
+ int err;
+
+@@ -471,10 +648,78 @@ static int sfp_sm_mod_probe(struct sfp *
+ rev[4] = '\0';
+ memcpy(sn, sfp->id.ext.vendor_sn, 16);
+ sn[16] = '\0';
+- memcpy(date, sfp->id.ext.datecode, 8);
++ date[0] = sfp->id.ext.datecode[4];
++ date[1] = sfp->id.ext.datecode[5];
++ date[2] = '-';
++ date[3] = sfp->id.ext.datecode[2];
++ date[4] = sfp->id.ext.datecode[3];
++ date[5] = '-';
++ date[6] = sfp->id.ext.datecode[0];
++ date[7] = sfp->id.ext.datecode[1];
+ date[8] = '\0';
+
+ dev_info(sfp->dev, "module %s %s rev %s sn %s dc %s\n", vendor, part, rev, sn, date);
++ dev_info(sfp->dev, " %s connector, encoding %s, nominal bitrate %u.%uGbps +%u%% -%u%%\n",
++ sfp_connector(sfp->id.base.connector),
++ sfp_encoding(sfp->id.base.encoding),
++ sfp->id.base.br_nominal / 10,
++ sfp->id.base.br_nominal % 10,
++ sfp->id.ext.br_max, sfp->id.ext.br_min);
++ dev_info(sfp->dev, " 1000BaseSX%c 1000BaseLX%c 1000BaseCX%c 1000BaseT%c 100BaseTLX%c 1000BaseFX%c BaseBX10%c BasePX%c\n",
++ sfp->id.base.e1000_base_sx ? '+' : '-',
++ sfp->id.base.e1000_base_lx ? '+' : '-',
++ sfp->id.base.e1000_base_cx ? '+' : '-',
++ sfp->id.base.e1000_base_t ? '+' : '-',
++ sfp->id.base.e100_base_lx ? '+' : '-',
++ sfp->id.base.e100_base_fx ? '+' : '-',
++ sfp->id.base.e_base_bx10 ? '+' : '-',
++ sfp->id.base.e_base_px ? '+' : '-');
++
++ if (!sfp->id.base.sfp_ct_passive && !sfp->id.base.sfp_ct_active &&
++ !sfp->id.base.e1000_base_t) {
++ char len_9um[16], len_om[16];
++
++ dev_info(sfp->dev, " Wavelength %unm, fiber lengths:\n",
++ be16_to_cpup(&sfp->id.base.optical_wavelength));
++
++ if (sfp->id.base.link_len[0] == 255)
++ strcpy(len_9um, ">254km");
++ else if (sfp->id.base.link_len[1] && sfp->id.base.link_len[1] != 255)
++ sprintf(len_9um, "%um",
++ sfp->id.base.link_len[1] * 100);
++ else if (sfp->id.base.link_len[0])
++ sprintf(len_9um, "%ukm", sfp->id.base.link_len[0]);
++ else if (sfp->id.base.link_len[1] == 255)
++ strcpy(len_9um, ">25.4km");
++ else
++ strcpy(len_9um, "unsupported");
++
++ dev_info(sfp->dev, " 9µm SM : %s\n", len_9um);
++ dev_info(sfp->dev, " 62.5µm MM OM1: %s\n",
++ sfp_link_len(len_om, sizeof(len_om),
++ sfp->id.base.link_len[3], 10));
++ dev_info(sfp->dev, " 50µm MM OM2: %s\n",
++ sfp_link_len(len_om, sizeof(len_om),
++ sfp->id.base.link_len[2], 10));
++ dev_info(sfp->dev, " 50µm MM OM3: %s\n",
++ sfp_link_len(len_om, sizeof(len_om),
++ sfp->id.base.link_len[5], 10));
++ dev_info(sfp->dev, " 50µm MM OM4: %s\n",
++ sfp_link_len(len_om, sizeof(len_om),
++ sfp->id.base.link_len[4], 10));
++ } else {
++ char len[16];
++ dev_info(sfp->dev, " Copper length: %s\n",
++ sfp_link_len(len, sizeof(len),
++ sfp->id.base.link_len[4], 1));
++ }
++
++ dev_info(sfp->dev, " Options: %s\n",
++ sfp_bitfield(options, sizeof(options), sfp_options,
++ be16_to_cpu(sfp->id.ext.options)));
++ dev_info(sfp->dev, " Diagnostics: %s\n",
++ sfp_bitfield(options, sizeof(options), diagmon,
++ sfp->id.ext.diagmon));
+
+ /* We only support SFP modules, not the legacy GBIC modules. */
+ if (sfp->id.base.phys_id != SFP_PHYS_ID_SFP ||
diff --git a/target/linux/mvebu/patches-4.9/419-net-mvneta-convert-to-phylink.patch b/target/linux/mvebu/patches-4.9/419-net-mvneta-convert-to-phylink.patch
new file mode 100644
index 0000000000..dca4fa2992
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/419-net-mvneta-convert-to-phylink.patch
@@ -0,0 +1,743 @@
+From: Russell King <rmk+kernel@arm.linux.org.uk>
+Date: Wed, 16 Sep 2015 21:27:10 +0100
+Subject: [PATCH] net: mvneta: convert to phylink
+
+Convert mvneta to use phylink, which models the MAC to PHY link in
+a generic, reusable form.
+
+Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
+---
+
+--- a/drivers/net/ethernet/marvell/Kconfig
++++ b/drivers/net/ethernet/marvell/Kconfig
+@@ -57,7 +57,7 @@ config MVNETA
+ tristate "Marvell Armada 370/38x/XP network interface support"
+ depends on PLAT_ORION
+ select MVMDIO
+- select FIXED_PHY
++ select PHYLINK
+ ---help---
+ This driver supports the network interface units in the
+ Marvell ARMADA XP, ARMADA 370 and ARMADA 38x SoC family.
+--- a/drivers/net/ethernet/marvell/mvneta.c
++++ b/drivers/net/ethernet/marvell/mvneta.c
+@@ -28,6 +28,7 @@
+ #include <linux/of_mdio.h>
+ #include <linux/of_net.h>
+ #include <linux/phy.h>
++#include <linux/phylink.h>
+ #include <linux/platform_device.h>
+ #include <linux/skbuff.h>
+ #include <net/hwbm.h>
+@@ -188,6 +189,7 @@
+ #define MVNETA_GMAC_CTRL_0 0x2c00
+ #define MVNETA_GMAC_MAX_RX_SIZE_SHIFT 2
+ #define MVNETA_GMAC_MAX_RX_SIZE_MASK 0x7ffc
++#define MVNETA_GMAC0_PORT_1000BASE_X BIT(1)
+ #define MVNETA_GMAC0_PORT_ENABLE BIT(0)
+ #define MVNETA_GMAC_CTRL_2 0x2c08
+ #define MVNETA_GMAC2_INBAND_AN_ENABLE BIT(0)
+@@ -203,13 +205,19 @@
+ #define MVNETA_GMAC_TX_FLOW_CTRL_ENABLE BIT(5)
+ #define MVNETA_GMAC_RX_FLOW_CTRL_ACTIVE BIT(6)
+ #define MVNETA_GMAC_TX_FLOW_CTRL_ACTIVE BIT(7)
++#define MVNETA_GMAC_AN_COMPLETE BIT(11)
++#define MVNETA_GMAC_SYNC_OK BIT(14)
+ #define MVNETA_GMAC_AUTONEG_CONFIG 0x2c0c
+ #define MVNETA_GMAC_FORCE_LINK_DOWN BIT(0)
+ #define MVNETA_GMAC_FORCE_LINK_PASS BIT(1)
+ #define MVNETA_GMAC_INBAND_AN_ENABLE BIT(2)
++#define MVNETA_GMAC_AN_BYPASS_ENABLE BIT(3)
++#define MVNETA_GMAC_INBAND_RESTART_AN BIT(4)
+ #define MVNETA_GMAC_CONFIG_MII_SPEED BIT(5)
+ #define MVNETA_GMAC_CONFIG_GMII_SPEED BIT(6)
+ #define MVNETA_GMAC_AN_SPEED_EN BIT(7)
++#define MVNETA_GMAC_CONFIG_FLOW_CTRL BIT(8)
++#define MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL BIT(9)
+ #define MVNETA_GMAC_AN_FLOW_CTRL_EN BIT(11)
+ #define MVNETA_GMAC_CONFIG_FULL_DUPLEX BIT(12)
+ #define MVNETA_GMAC_AN_DUPLEX_EN BIT(13)
+@@ -399,14 +407,9 @@ struct mvneta_port {
+ u16 tx_ring_size;
+ u16 rx_ring_size;
+
+- struct mii_bus *mii_bus;
+- phy_interface_t phy_interface;
+- struct device_node *phy_node;
+- unsigned int link;
+- unsigned int duplex;
+- unsigned int speed;
++ struct device_node *dn;
+ unsigned int tx_csum_limit;
+- unsigned int use_inband_status:1;
++ struct phylink *phylink;
+
+ struct mvneta_bm *bm_priv;
+ struct mvneta_bm_pool *pool_long;
+@@ -1240,44 +1243,6 @@ static void mvneta_set_other_mcast_table
+ mvreg_write(pp, MVNETA_DA_FILT_OTH_MCAST + offset, val);
+ }
+
+-static void mvneta_set_autoneg(struct mvneta_port *pp, int enable)
+-{
+- u32 val;
+-
+- if (enable) {
+- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+- val &= ~(MVNETA_GMAC_FORCE_LINK_PASS |
+- MVNETA_GMAC_FORCE_LINK_DOWN |
+- MVNETA_GMAC_AN_FLOW_CTRL_EN);
+- val |= MVNETA_GMAC_INBAND_AN_ENABLE |
+- MVNETA_GMAC_AN_SPEED_EN |
+- MVNETA_GMAC_AN_DUPLEX_EN;
+- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+-
+- val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
+- val |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
+- mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
+-
+- val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
+- val |= MVNETA_GMAC2_INBAND_AN_ENABLE;
+- mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
+- } else {
+- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+- val &= ~(MVNETA_GMAC_INBAND_AN_ENABLE |
+- MVNETA_GMAC_AN_SPEED_EN |
+- MVNETA_GMAC_AN_DUPLEX_EN);
+- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+-
+- val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
+- val &= ~MVNETA_GMAC_1MS_CLOCK_ENABLE;
+- mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
+-
+- val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
+- val &= ~MVNETA_GMAC2_INBAND_AN_ENABLE;
+- mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
+- }
+-}
+-
+ static void mvneta_percpu_unmask_interrupt(void *arg)
+ {
+ struct mvneta_port *pp = arg;
+@@ -1425,7 +1390,6 @@ static void mvneta_defaults_set(struct m
+ val &= ~MVNETA_PHY_POLLING_ENABLE;
+ mvreg_write(pp, MVNETA_UNIT_CONTROL, val);
+
+- mvneta_set_autoneg(pp, pp->use_inband_status);
+ mvneta_set_ucast_table(pp, -1);
+ mvneta_set_special_mcast_table(pp, -1);
+ mvneta_set_other_mcast_table(pp, -1);
+@@ -2630,26 +2594,11 @@ static irqreturn_t mvneta_isr(int irq, v
+ return IRQ_HANDLED;
+ }
+
+-static int mvneta_fixed_link_update(struct mvneta_port *pp,
+- struct phy_device *phy)
++static void mvneta_link_change(struct mvneta_port *pp)
+ {
+- struct fixed_phy_status status;
+- struct fixed_phy_status changed = {};
+ u32 gmac_stat = mvreg_read(pp, MVNETA_GMAC_STATUS);
+
+- status.link = !!(gmac_stat & MVNETA_GMAC_LINK_UP);
+- if (gmac_stat & MVNETA_GMAC_SPEED_1000)
+- status.speed = SPEED_1000;
+- else if (gmac_stat & MVNETA_GMAC_SPEED_100)
+- status.speed = SPEED_100;
+- else
+- status.speed = SPEED_10;
+- status.duplex = !!(gmac_stat & MVNETA_GMAC_FULL_DUPLEX);
+- changed.link = 1;
+- changed.speed = 1;
+- changed.duplex = 1;
+- fixed_phy_update_state(phy, &status, &changed);
+- return 0;
++ phylink_mac_change(pp->phylink, !!(gmac_stat & MVNETA_GMAC_LINK_UP));
+ }
+
+ /* NAPI handler
+@@ -2665,7 +2614,6 @@ static int mvneta_poll(struct napi_struc
+ u32 cause_rx_tx;
+ int rx_queue;
+ struct mvneta_port *pp = netdev_priv(napi->dev);
+- struct net_device *ndev = pp->dev;
+ struct mvneta_pcpu_port *port = this_cpu_ptr(pp->ports);
+
+ if (!netif_running(pp->dev)) {
+@@ -2679,12 +2627,11 @@ static int mvneta_poll(struct napi_struc
+ u32 cause_misc = mvreg_read(pp, MVNETA_INTR_MISC_CAUSE);
+
+ mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0);
+- if (pp->use_inband_status && (cause_misc &
+- (MVNETA_CAUSE_PHY_STATUS_CHANGE |
+- MVNETA_CAUSE_LINK_CHANGE |
+- MVNETA_CAUSE_PSC_SYNC_CHANGE))) {
+- mvneta_fixed_link_update(pp, ndev->phydev);
+- }
++
++ if (cause_misc & (MVNETA_CAUSE_PHY_STATUS_CHANGE |
++ MVNETA_CAUSE_LINK_CHANGE |
++ MVNETA_CAUSE_PSC_SYNC_CHANGE))
++ mvneta_link_change(pp);
+ }
+
+ /* Release Tx descriptors */
+@@ -2982,7 +2929,6 @@ static int mvneta_setup_txqs(struct mvne
+ static void mvneta_start_dev(struct mvneta_port *pp)
+ {
+ int cpu;
+- struct net_device *ndev = pp->dev;
+
+ mvneta_max_rx_size_set(pp, pp->pkt_size);
+ mvneta_txq_max_tx_size_set(pp, pp->pkt_size);
+@@ -3005,16 +2951,15 @@ static void mvneta_start_dev(struct mvne
+ MVNETA_CAUSE_LINK_CHANGE |
+ MVNETA_CAUSE_PSC_SYNC_CHANGE);
+
+- phy_start(ndev->phydev);
++ phylink_start(pp->phylink);
+ netif_tx_start_all_queues(pp->dev);
+ }
+
+ static void mvneta_stop_dev(struct mvneta_port *pp)
+ {
+ unsigned int cpu;
+- struct net_device *ndev = pp->dev;
+
+- phy_stop(ndev->phydev);
++ phylink_stop(pp->phylink);
+
+ for_each_online_cpu(cpu) {
+ struct mvneta_pcpu_port *port = per_cpu_ptr(pp->ports, cpu);
+@@ -3184,99 +3129,210 @@ static int mvneta_set_mac_addr(struct ne
+ return 0;
+ }
+
+-static void mvneta_adjust_link(struct net_device *ndev)
++static void mvneta_validate_support(struct net_device *ndev, unsigned int mode,
++ unsigned long *support)
++{
++ __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
++
++ /* Allow all the expected bits */
++ phylink_set(mask, Autoneg);
++ phylink_set(mask, TP);
++ phylink_set(mask, AUI);
++ phylink_set(mask, MII);
++ phylink_set(mask, FIBRE);
++ phylink_set(mask, BNC);
++ phylink_set(mask, Backplane);
++
++ /* Half-duplex at speeds higher than 100Mbit is unsupported */
++ phylink_set(mask, 1000baseT_Full);
++ phylink_set(mask, 1000baseX_Full);
++
++ if (mode != MLO_AN_8023Z) {
++ /* 10M and 100M are only supported in non-802.3z mode */
++ phylink_set(mask, 10baseT_Half);
++ phylink_set(mask, 10baseT_Full);
++ phylink_set(mask, 100baseT_Half);
++ phylink_set(mask, 100baseT_Full);
++ } else {
++ phylink_set(mask, Pause);
++ }
++
++ bitmap_and(support, support, mask, __ETHTOOL_LINK_MODE_MASK_NBITS);
++}
++
++static int mvneta_mac_link_state(struct net_device *ndev,
++ struct phylink_link_state *state)
+ {
+ struct mvneta_port *pp = netdev_priv(ndev);
+- struct phy_device *phydev = ndev->phydev;
+- int status_change = 0;
++ u32 gmac_stat;
++
++ gmac_stat = mvreg_read(pp, MVNETA_GMAC_STATUS);
++
++ if (gmac_stat & MVNETA_GMAC_SPEED_1000)
++ state->speed = SPEED_1000;
++ else if (gmac_stat & MVNETA_GMAC_SPEED_100)
++ state->speed = SPEED_100;
++ else
++ state->speed = SPEED_10;
+
+- if (phydev->link) {
+- if ((pp->speed != phydev->speed) ||
+- (pp->duplex != phydev->duplex)) {
+- u32 val;
+-
+- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+- val &= ~(MVNETA_GMAC_CONFIG_MII_SPEED |
+- MVNETA_GMAC_CONFIG_GMII_SPEED |
+- MVNETA_GMAC_CONFIG_FULL_DUPLEX);
+-
+- if (phydev->duplex)
+- val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
+-
+- if (phydev->speed == SPEED_1000)
+- val |= MVNETA_GMAC_CONFIG_GMII_SPEED;
+- else if (phydev->speed == SPEED_100)
+- val |= MVNETA_GMAC_CONFIG_MII_SPEED;
++ state->an_complete = !!(gmac_stat & MVNETA_GMAC_AN_COMPLETE);
++ state->link = !!(gmac_stat & MVNETA_GMAC_LINK_UP);
++ state->duplex = !!(gmac_stat & MVNETA_GMAC_FULL_DUPLEX);
+
+- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
++ return 1;
++}
+
+- pp->duplex = phydev->duplex;
+- pp->speed = phydev->speed;
+- }
++static void mvneta_mac_an_restart(struct net_device *ndev, unsigned int mode)
++{
++ struct mvneta_port *pp = netdev_priv(ndev);
++
++ if (mode == MLO_AN_8023Z) {
++ u32 gmac_an = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
++
++ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG,
++ gmac_an | MVNETA_GMAC_INBAND_RESTART_AN);
++ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG,
++ gmac_an & ~MVNETA_GMAC_INBAND_RESTART_AN);
+ }
++}
+
+- if (phydev->link != pp->link) {
+- if (!phydev->link) {
+- pp->duplex = -1;
+- pp->speed = 0;
+- }
++static void mvneta_mac_config(struct net_device *ndev, unsigned int mode,
++ const struct phylink_link_state *state)
++{
++ struct mvneta_port *pp = netdev_priv(ndev);
++ u32 new_ctrl0, gmac_ctrl0 = mvreg_read(pp, MVNETA_GMAC_CTRL_0);
++ u32 new_ctrl2, gmac_ctrl2 = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
++ u32 new_clk, gmac_clk = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
++ u32 new_an, gmac_an = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
++
++ new_ctrl0 = gmac_ctrl0 & ~MVNETA_GMAC0_PORT_1000BASE_X;
++ new_ctrl2 = gmac_ctrl2 & ~MVNETA_GMAC2_INBAND_AN_ENABLE;
++ new_clk = gmac_clk & ~MVNETA_GMAC_1MS_CLOCK_ENABLE;
++ new_an = gmac_an & ~(MVNETA_GMAC_INBAND_AN_ENABLE |
++ MVNETA_GMAC_INBAND_RESTART_AN |
++ MVNETA_GMAC_CONFIG_MII_SPEED |
++ MVNETA_GMAC_CONFIG_GMII_SPEED |
++ MVNETA_GMAC_AN_SPEED_EN |
++ MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL |
++ MVNETA_GMAC_CONFIG_FLOW_CTRL |
++ MVNETA_GMAC_AN_FLOW_CTRL_EN |
++ MVNETA_GMAC_CONFIG_FULL_DUPLEX |
++ MVNETA_GMAC_AN_DUPLEX_EN);
++
++ if (phylink_test(state->advertising, Pause))
++ new_an |= MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL;
++
++ switch (mode) {
++ case MLO_AN_SGMII:
++ /* SGMII mode receives the state from the PHY */
++ new_ctrl2 |= MVNETA_GMAC2_INBAND_AN_ENABLE;
++ new_clk |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
++ new_an = (new_an & ~(MVNETA_GMAC_FORCE_LINK_DOWN |
++ MVNETA_GMAC_FORCE_LINK_PASS)) |
++ MVNETA_GMAC_INBAND_AN_ENABLE |
++ MVNETA_GMAC_AN_SPEED_EN |
++ MVNETA_GMAC_AN_DUPLEX_EN;
++ break;
+
+- pp->link = phydev->link;
+- status_change = 1;
++ case MLO_AN_8023Z:
++ /* 802.3z negotiation - only 1000base-X */
++ new_ctrl0 |= MVNETA_GMAC0_PORT_1000BASE_X;
++ new_clk |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
++ new_an = (new_an & ~(MVNETA_GMAC_FORCE_LINK_DOWN |
++ MVNETA_GMAC_FORCE_LINK_PASS)) |
++ MVNETA_GMAC_INBAND_AN_ENABLE |
++ MVNETA_GMAC_CONFIG_GMII_SPEED |
++ /* The MAC only supports FD mode */
++ MVNETA_GMAC_CONFIG_FULL_DUPLEX;
++
++ if (state->an_enabled)
++ new_an |= MVNETA_GMAC_AN_FLOW_CTRL_EN;
++ break;
++
++ default:
++ /* Phy or fixed speed */
++ if (state->duplex)
++ new_an |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
++
++ if (state->speed == SPEED_1000)
++ new_an |= MVNETA_GMAC_CONFIG_GMII_SPEED;
++ else if (state->speed == SPEED_100)
++ new_an |= MVNETA_GMAC_CONFIG_MII_SPEED;
++ break;
+ }
+
+- if (status_change) {
+- if (phydev->link) {
+- if (!pp->use_inband_status) {
+- u32 val = mvreg_read(pp,
+- MVNETA_GMAC_AUTONEG_CONFIG);
+- val &= ~MVNETA_GMAC_FORCE_LINK_DOWN;
+- val |= MVNETA_GMAC_FORCE_LINK_PASS;
+- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG,
+- val);
+- }
+- mvneta_port_up(pp);
+- } else {
+- if (!pp->use_inband_status) {
+- u32 val = mvreg_read(pp,
+- MVNETA_GMAC_AUTONEG_CONFIG);
+- val &= ~MVNETA_GMAC_FORCE_LINK_PASS;
+- val |= MVNETA_GMAC_FORCE_LINK_DOWN;
+- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG,
+- val);
+- }
+- mvneta_port_down(pp);
+- }
+- phy_print_status(phydev);
++ /* Armada 370 documentation says we can only change the port mode
++ * and in-band enable when the link is down, so force it down
++ * while making these changes. We also do this for GMAC_CTRL2 */
++ if ((new_ctrl0 ^ gmac_ctrl0) & MVNETA_GMAC0_PORT_1000BASE_X ||
++ (new_ctrl2 ^ gmac_ctrl2) & MVNETA_GMAC2_INBAND_AN_ENABLE ||
++ (new_an ^ gmac_an) & MVNETA_GMAC_INBAND_AN_ENABLE) {
++ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG,
++ (gmac_an & ~MVNETA_GMAC_FORCE_LINK_PASS) |
++ MVNETA_GMAC_FORCE_LINK_DOWN);
++ }
++
++ if (new_ctrl0 != gmac_ctrl0)
++ mvreg_write(pp, MVNETA_GMAC_CTRL_0, new_ctrl0);
++ if (new_ctrl2 != gmac_ctrl2)
++ mvreg_write(pp, MVNETA_GMAC_CTRL_2, new_ctrl2);
++ if (new_clk != gmac_clk)
++ mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, new_clk);
++ if (new_an != gmac_an)
++ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, new_an);
++}
++
++static void mvneta_mac_link_down(struct net_device *ndev, unsigned int mode)
++{
++ struct mvneta_port *pp = netdev_priv(ndev);
++ u32 val;
++
++ mvneta_port_down(pp);
++
++ if (mode == MLO_AN_PHY || mode == MLO_AN_FIXED) {
++ val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
++ val &= ~MVNETA_GMAC_FORCE_LINK_PASS;
++ val |= MVNETA_GMAC_FORCE_LINK_DOWN;
++ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+ }
+ }
+
+-static int mvneta_mdio_probe(struct mvneta_port *pp)
++static void mvneta_mac_link_up(struct net_device *ndev, unsigned int mode)
+ {
+- struct phy_device *phy_dev;
++ struct mvneta_port *pp = netdev_priv(ndev);
++ u32 val;
+
+- phy_dev = of_phy_connect(pp->dev, pp->phy_node, mvneta_adjust_link, 0,
+- pp->phy_interface);
+- if (!phy_dev) {
+- netdev_err(pp->dev, "could not find the PHY\n");
+- return -ENODEV;
++ if (mode == MLO_AN_PHY || mode == MLO_AN_FIXED) {
++ val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
++ val &= ~MVNETA_GMAC_FORCE_LINK_DOWN;
++ val |= MVNETA_GMAC_FORCE_LINK_PASS;
++ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+ }
+
+- phy_dev->supported &= PHY_GBIT_FEATURES;
+- phy_dev->advertising = phy_dev->supported;
++ mvneta_port_up(pp);
++}
+
+- pp->link = 0;
+- pp->duplex = 0;
+- pp->speed = 0;
++static const struct phylink_mac_ops mvneta_phylink_ops = {
++ .validate_support = mvneta_validate_support,
++ .mac_link_state = mvneta_mac_link_state,
++ .mac_an_restart = mvneta_mac_an_restart,
++ .mac_config = mvneta_mac_config,
++ .mac_link_down = mvneta_mac_link_down,
++ .mac_link_up = mvneta_mac_link_up,
++};
+
+- return 0;
++static int mvneta_mdio_probe(struct mvneta_port *pp)
++{
++ int err = phylink_of_phy_connect(pp->phylink, pp->dn);
++ if (err)
++ netdev_err(pp->dev, "could not attach PHY\n");
++
++ return err;
+ }
+
+ static void mvneta_mdio_remove(struct mvneta_port *pp)
+ {
+- struct net_device *ndev = pp->dev;
+-
+- phy_disconnect(ndev->phydev);
++ phylink_disconnect_phy(pp->phylink);
+ }
+
+ /* Electing a CPU must be done in an atomic way: it should be done
+@@ -3534,10 +3590,9 @@ static int mvneta_stop(struct net_device
+
+ static int mvneta_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+ {
+- if (!dev->phydev)
+- return -ENOTSUPP;
++ struct mvneta_port *pp = netdev_priv(dev);
+
+- return phy_mii_ioctl(dev->phydev, ifr, cmd);
++ return phylink_mii_ioctl(pp->phylink, ifr, cmd);
+ }
+
+ /* Ethtool methods */
+@@ -3548,44 +3603,18 @@ mvneta_ethtool_set_link_ksettings(struct
+ const struct ethtool_link_ksettings *cmd)
+ {
+ struct mvneta_port *pp = netdev_priv(ndev);
+- struct phy_device *phydev = ndev->phydev;
+-
+- if (!phydev)
+- return -ENODEV;
+
+- if ((cmd->base.autoneg == AUTONEG_ENABLE) != pp->use_inband_status) {
+- u32 val;
+-
+- mvneta_set_autoneg(pp, cmd->base.autoneg == AUTONEG_ENABLE);
+-
+- if (cmd->base.autoneg == AUTONEG_DISABLE) {
+- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+- val &= ~(MVNETA_GMAC_CONFIG_MII_SPEED |
+- MVNETA_GMAC_CONFIG_GMII_SPEED |
+- MVNETA_GMAC_CONFIG_FULL_DUPLEX);
+-
+- if (phydev->duplex)
+- val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
+-
+- if (phydev->speed == SPEED_1000)
+- val |= MVNETA_GMAC_CONFIG_GMII_SPEED;
+- else if (phydev->speed == SPEED_100)
+- val |= MVNETA_GMAC_CONFIG_MII_SPEED;
+-
+- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+- }
++ return phylink_ethtool_ksettings_set(pp->phylink, cmd);
++}
+
+- pp->use_inband_status = (cmd->base.autoneg == AUTONEG_ENABLE);
+- netdev_info(pp->dev, "autoneg status set to %i\n",
+- pp->use_inband_status);
+-
+- if (netif_running(ndev)) {
+- mvneta_port_down(pp);
+- mvneta_port_up(pp);
+- }
+- }
++/* Get link ksettings for ethtools */
++static int
++mvneta_ethtool_get_link_ksettings(struct net_device *ndev,
++ struct ethtool_link_ksettings *cmd)
++{
++ struct mvneta_port *pp = netdev_priv(ndev);
+
+- return phy_ethtool_ksettings_set(ndev->phydev, cmd);
++ return phylink_ethtool_ksettings_get(pp->phylink, cmd);
+ }
+
+ /* Set interrupt coalescing for ethtools */
+@@ -3693,26 +3722,28 @@ static void mvneta_ethtool_update_stats(
+ {
+ const struct mvneta_statistic *s;
+ void __iomem *base = pp->base;
+- u32 high, low, val;
+- u64 val64;
++ u32 high, low;
++ u64 val;
+ int i;
+
+ for (i = 0, s = mvneta_statistics;
+ s < mvneta_statistics + ARRAY_SIZE(mvneta_statistics);
+ s++, i++) {
++ val = 0;
++
+ switch (s->type) {
+ case T_REG_32:
+ val = readl_relaxed(base + s->offset);
+- pp->ethtool_stats[i] += val;
+ break;
+ case T_REG_64:
+ /* Docs say to read low 32-bit then high */
+ low = readl_relaxed(base + s->offset);
+ high = readl_relaxed(base + s->offset + 4);
+- val64 = (u64)high << 32 | low;
+- pp->ethtool_stats[i] += val64;
++ val = (u64)high << 32 | low;
+ break;
+ }
++
++ pp->ethtool_stats[i] += val;
+ }
+ }
+
+@@ -3872,7 +3903,7 @@ const struct ethtool_ops mvneta_eth_tool
+ .get_rxnfc = mvneta_ethtool_get_rxnfc,
+ .get_rxfh = mvneta_ethtool_get_rxfh,
+ .set_rxfh = mvneta_ethtool_set_rxfh,
+- .get_link_ksettings = phy_ethtool_get_link_ksettings,
++ .get_link_ksettings = mvneta_ethtool_get_link_ksettings,
+ .set_link_ksettings = mvneta_ethtool_set_link_ksettings,
+ };
+
+@@ -3999,14 +4030,13 @@ static int mvneta_probe(struct platform_
+ const struct mbus_dram_target_info *dram_target_info;
+ struct resource *res;
+ struct device_node *dn = pdev->dev.of_node;
+- struct device_node *phy_node;
+ struct device_node *bm_node;
+ struct mvneta_port *pp;
+ struct net_device *dev;
++ struct phylink *phylink;
+ const char *dt_mac_addr;
+ char hw_mac_addr[ETH_ALEN];
+ const char *mac_from;
+- const char *managed;
+ int tx_csum_limit;
+ int phy_mode;
+ int err;
+@@ -4022,31 +4052,11 @@ static int mvneta_probe(struct platform_
+ goto err_free_netdev;
+ }
+
+- phy_node = of_parse_phandle(dn, "phy", 0);
+- if (!phy_node) {
+- if (!of_phy_is_fixed_link(dn)) {
+- dev_err(&pdev->dev, "no PHY specified\n");
+- err = -ENODEV;
+- goto err_free_irq;
+- }
+-
+- err = of_phy_register_fixed_link(dn);
+- if (err < 0) {
+- dev_err(&pdev->dev, "cannot register fixed PHY\n");
+- goto err_free_irq;
+- }
+-
+- /* In the case of a fixed PHY, the DT node associated
+- * to the PHY is the Ethernet MAC DT node.
+- */
+- phy_node = of_node_get(dn);
+- }
+-
+ phy_mode = of_get_phy_mode(dn);
+ if (phy_mode < 0) {
+ dev_err(&pdev->dev, "incorrect phy-mode\n");
+ err = -EINVAL;
+- goto err_put_phy_node;
++ goto err_free_irq;
+ }
+
+ dev->tx_queue_len = MVNETA_MAX_TXD;
+@@ -4057,12 +4067,7 @@ static int mvneta_probe(struct platform_
+
+ pp = netdev_priv(dev);
+ spin_lock_init(&pp->lock);
+- pp->phy_node = phy_node;
+- pp->phy_interface = phy_mode;
+-
+- err = of_property_read_string(dn, "managed", &managed);
+- pp->use_inband_status = (err == 0 &&
+- strcmp(managed, "in-band-status") == 0);
++ pp->dn = dn;
+
+ pp->rxq_def = rxq_def;
+
+@@ -4073,7 +4078,7 @@ static int mvneta_probe(struct platform_
+ pp->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(pp->clk)) {
+ err = PTR_ERR(pp->clk);
+- goto err_put_phy_node;
++ goto err_free_irq;
+ }
+
+ clk_prepare_enable(pp->clk);
+@@ -4181,6 +4186,14 @@ static int mvneta_probe(struct platform_
+ dev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
+ dev->gso_max_segs = MVNETA_MAX_TSO_SEGS;
+
++ phylink = phylink_create(dev, dn, phy_mode, &mvneta_phylink_ops);
++ if (IS_ERR(phylink)) {
++ err = PTR_ERR(phylink);
++ goto err_free_stats;
++ }
++
++ pp->phylink = phylink;
++
+ err = register_netdev(dev);
+ if (err < 0) {
+ dev_err(&pdev->dev, "failed to register\n");
+@@ -4192,14 +4205,6 @@ static int mvneta_probe(struct platform_
+
+ platform_set_drvdata(pdev, pp->dev);
+
+- if (pp->use_inband_status) {
+- struct phy_device *phy = of_phy_find_device(dn);
+-
+- mvneta_fixed_link_update(pp, phy);
+-
+- put_device(&phy->mdio.dev);
+- }
+-
+ return 0;
+
+ err_netdev:
+@@ -4210,16 +4215,14 @@ err_netdev:
+ 1 << pp->id);
+ }
+ err_free_stats:
++ if (pp->phylink)
++ phylink_destroy(pp->phylink);
+ free_percpu(pp->stats);
+ err_free_ports:
+ free_percpu(pp->ports);
+ err_clk:
+ clk_disable_unprepare(pp->clk_bus);
+ clk_disable_unprepare(pp->clk);
+-err_put_phy_node:
+- of_node_put(phy_node);
+- if (of_phy_is_fixed_link(dn))
+- of_phy_deregister_fixed_link(dn);
+ err_free_irq:
+ irq_dispose_mapping(dev->irq);
+ err_free_netdev:
+@@ -4231,7 +4234,6 @@ err_free_netdev:
+ static int mvneta_remove(struct platform_device *pdev)
+ {
+ struct net_device *dev = platform_get_drvdata(pdev);
+- struct device_node *dn = pdev->dev.of_node;
+ struct mvneta_port *pp = netdev_priv(dev);
+
+ unregister_netdev(dev);
+@@ -4239,10 +4241,8 @@ static int mvneta_remove(struct platform
+ clk_disable_unprepare(pp->clk);
+ free_percpu(pp->ports);
+ free_percpu(pp->stats);
+- if (of_phy_is_fixed_link(dn))
+- of_phy_deregister_fixed_link(dn);
+ irq_dispose_mapping(dev->irq);
+- of_node_put(pp->phy_node);
++ phylink_destroy(pp->phylink);
+ free_netdev(dev);
+
+ if (pp->bm_priv) {
diff --git a/target/linux/mvebu/patches-4.9/420-net-mvneta-disable-MVNETA_CAUSE_PSC_SYNC_CHANGE-inte.patch b/target/linux/mvebu/patches-4.9/420-net-mvneta-disable-MVNETA_CAUSE_PSC_SYNC_CHANGE-inte.patch
new file mode 100644
index 0000000000..c0abab57da
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/420-net-mvneta-disable-MVNETA_CAUSE_PSC_SYNC_CHANGE-inte.patch
@@ -0,0 +1,58 @@
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Sat, 24 Dec 2016 10:27:08 +0000
+Subject: [PATCH] net: mvneta: disable MVNETA_CAUSE_PSC_SYNC_CHANGE
+ interrupt
+
+The PSC sync change interrupt can fire multiple times while the link is
+down. As this isn't information we make use of, it's pointless having
+the interrupt enabled, so let's disable this interrupt.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+
+--- a/drivers/net/ethernet/marvell/mvneta.c
++++ b/drivers/net/ethernet/marvell/mvneta.c
+@@ -2629,9 +2629,11 @@ static int mvneta_poll(struct napi_struc
+ mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0);
+
+ if (cause_misc & (MVNETA_CAUSE_PHY_STATUS_CHANGE |
+- MVNETA_CAUSE_LINK_CHANGE |
+- MVNETA_CAUSE_PSC_SYNC_CHANGE))
++ MVNETA_CAUSE_LINK_CHANGE)) {
++ printk(KERN_DEBUG "%s: cause 0x%08x:0x%08x\n",
++ __func__, cause_rx_tx, cause_misc);
+ mvneta_link_change(pp);
++ }
+ }
+
+ /* Release Tx descriptors */
+@@ -2948,8 +2950,7 @@ static void mvneta_start_dev(struct mvne
+
+ mvreg_write(pp, MVNETA_INTR_MISC_MASK,
+ MVNETA_CAUSE_PHY_STATUS_CHANGE |
+- MVNETA_CAUSE_LINK_CHANGE |
+- MVNETA_CAUSE_PSC_SYNC_CHANGE);
++ MVNETA_CAUSE_LINK_CHANGE);
+
+ phylink_start(pp->phylink);
+ netif_tx_start_all_queues(pp->dev);
+@@ -3440,8 +3441,7 @@ static int mvneta_cpu_online(unsigned in
+ on_each_cpu(mvneta_percpu_unmask_interrupt, pp, true);
+ mvreg_write(pp, MVNETA_INTR_MISC_MASK,
+ MVNETA_CAUSE_PHY_STATUS_CHANGE |
+- MVNETA_CAUSE_LINK_CHANGE |
+- MVNETA_CAUSE_PSC_SYNC_CHANGE);
++ MVNETA_CAUSE_LINK_CHANGE);
+ netif_tx_start_all_queues(pp->dev);
+ spin_unlock(&pp->lock);
+ return 0;
+@@ -3482,8 +3482,7 @@ static int mvneta_cpu_dead(unsigned int
+ on_each_cpu(mvneta_percpu_unmask_interrupt, pp, true);
+ mvreg_write(pp, MVNETA_INTR_MISC_MASK,
+ MVNETA_CAUSE_PHY_STATUS_CHANGE |
+- MVNETA_CAUSE_LINK_CHANGE |
+- MVNETA_CAUSE_PSC_SYNC_CHANGE);
++ MVNETA_CAUSE_LINK_CHANGE);
+ netif_tx_start_all_queues(pp->dev);
+ return 0;
+ }
diff --git a/target/linux/mvebu/patches-4.9/421-phylink-add-ethtool-nway_reset-support.patch b/target/linux/mvebu/patches-4.9/421-phylink-add-ethtool-nway_reset-support.patch
new file mode 100644
index 0000000000..d4436a732e
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/421-phylink-add-ethtool-nway_reset-support.patch
@@ -0,0 +1,44 @@
+From: Russell King <rmk+kernel@arm.linux.org.uk>
+Date: Thu, 1 Oct 2015 20:27:19 +0100
+Subject: [PATCH] phylink: add ethtool nway_reset support
+
+Add ethtool nway_reset support to phylink, to allow userspace to
+request a re-negotiation of the link.
+
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
+---
+
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -783,6 +783,20 @@ int phylink_ethtool_ksettings_set(struct
+ }
+ EXPORT_SYMBOL_GPL(phylink_ethtool_ksettings_set);
+
++int phylink_ethtool_nway_reset(struct phylink *pl)
++{
++ int ret = 0;
++
++ mutex_lock(&pl->config_mutex);
++ if (pl->phydev)
++ ret = genphy_restart_aneg(pl->phydev);
++ phylink_mac_an_restart(pl);
++ mutex_unlock(&pl->config_mutex);
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(phylink_ethtool_nway_reset);
++
+ /* This emulates MII registers for a fixed-mode phy operating as per the
+ * passed in state. "aneg" defines if we report negotiation is possible.
+ *
+--- a/include/linux/phylink.h
++++ b/include/linux/phylink.h
+@@ -86,6 +86,7 @@ int phylink_ethtool_ksettings_get(struct
+ struct ethtool_link_ksettings *);
+ int phylink_ethtool_ksettings_set(struct phylink *,
+ const struct ethtool_link_ksettings *);
++int phylink_ethtool_nway_reset(struct phylink *);
+ int phylink_mii_ioctl(struct phylink *, struct ifreq *, int);
+
+ int phylink_set_link(struct phylink *pl, unsigned int mode, u8 port,
diff --git a/target/linux/mvebu/patches-4.9/422-net-mvneta-add-nway_reset-support.patch b/target/linux/mvebu/patches-4.9/422-net-mvneta-add-nway_reset-support.patch
new file mode 100644
index 0000000000..c7725b3590
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/422-net-mvneta-add-nway_reset-support.patch
@@ -0,0 +1,35 @@
+From: Russell King <rmk+kernel@arm.linux.org.uk>
+Date: Thu, 1 Oct 2015 19:40:31 +0100
+Subject: [PATCH] net: mvneta: add nway_reset support
+
+Add ethtool nway_reset support to mvneta via phylink, so that userspace
+can request the link in whatever mode to be renegotiated via
+ethtool -r ethX.
+
+Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
+---
+
+--- a/drivers/net/ethernet/marvell/mvneta.c
++++ b/drivers/net/ethernet/marvell/mvneta.c
+@@ -3616,6 +3616,13 @@ mvneta_ethtool_get_link_ksettings(struct
+ return phylink_ethtool_ksettings_get(pp->phylink, cmd);
+ }
+
++static int mvneta_ethtool_nway_reset(struct net_device *dev)
++{
++ struct mvneta_port *pp = netdev_priv(dev);
++
++ return phylink_ethtool_nway_reset(pp->phylink);
++}
++
+ /* Set interrupt coalescing for ethtools */
+ static int mvneta_ethtool_set_coalesce(struct net_device *dev,
+ struct ethtool_coalesce *c)
+@@ -3889,6 +3896,7 @@ static const struct net_device_ops mvnet
+ };
+
+ const struct ethtool_ops mvneta_eth_tool_ops = {
++ .nway_reset = mvneta_ethtool_nway_reset,
+ .get_link = ethtool_op_get_link,
+ .set_coalesce = mvneta_ethtool_set_coalesce,
+ .get_coalesce = mvneta_ethtool_get_coalesce,
diff --git a/target/linux/mvebu/patches-4.9/423-phylink-add-flow-control-support.patch b/target/linux/mvebu/patches-4.9/423-phylink-add-flow-control-support.patch
new file mode 100644
index 0000000000..b0359f19a2
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/423-phylink-add-flow-control-support.patch
@@ -0,0 +1,232 @@
+From: Russell King <rmk+kernel@arm.linux.org.uk>
+Date: Thu, 1 Oct 2015 20:32:07 +0100
+Subject: [PATCH] phylink: add flow control support
+
+Add flow control support, including ethtool support, to phylink. We
+add support to allow ethtool to get and set the current flow control
+settings, and the 802.3 specified resolution for the local and remote
+link partner abilities.
+
+Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
+---
+
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -132,6 +132,9 @@ static int phylink_parse_fixedlink(struc
+
+ if (of_property_read_bool(fixed_node, "full-duplex"))
+ pl->link_config.duplex = DUPLEX_FULL;
++
++ /* We treat the "pause" and "asym-pause" terminology as
++ * defining the link partner's ability. */
+ if (of_property_read_bool(fixed_node, "pause"))
+ pl->link_config.pause |= MLO_PAUSE_SYM;
+ if (of_property_read_bool(fixed_node, "asym-pause"))
+@@ -277,6 +280,56 @@ static void phylink_get_fixed_state(stru
+ state->link = !!gpiod_get_value(pl->link_gpio);
+ }
+
++/* Flow control is resolved according to our and the link partners
++ * advertisments using the following drawn from the 802.3 specs:
++ * Local device Link partner
++ * Pause AsymDir Pause AsymDir Result
++ * 1 X 1 X TX+RX
++ * 0 1 1 1 RX
++ * 1 1 0 1 TX
++ */
++static void phylink_resolve_flow(struct phylink *pl,
++ struct phylink_link_state *state)
++{
++ int new_pause = 0;
++
++ if (pl->link_config.pause & MLO_PAUSE_AN) {
++ int pause = 0;
++
++ if (phylink_test(pl->link_config.advertising, Pause))
++ pause |= MLO_PAUSE_SYM;
++ if (phylink_test(pl->link_config.advertising, Asym_Pause))
++ pause |= MLO_PAUSE_ASYM;
++
++ pause &= state->pause;
++
++ if (pause & MLO_PAUSE_SYM)
++ new_pause = MLO_PAUSE_TX | MLO_PAUSE_RX;
++ else if (pause & MLO_PAUSE_ASYM)
++ new_pause = state->pause & MLO_PAUSE_SYM ?
++ MLO_PAUSE_RX : MLO_PAUSE_TX;
++ } else {
++ new_pause = pl->link_config.pause & MLO_PAUSE_TXRX_MASK;
++ }
++
++ state->pause &= ~MLO_PAUSE_TXRX_MASK;
++ state->pause |= new_pause;
++}
++
++static const char *phylink_pause_to_str(int pause)
++{
++ switch (pause & MLO_PAUSE_TXRX_MASK) {
++ case MLO_PAUSE_TX | MLO_PAUSE_RX:
++ return "rx/tx";
++ case MLO_PAUSE_TX:
++ return "tx";
++ case MLO_PAUSE_RX:
++ return "rx";
++ default:
++ return "off";
++ }
++}
++
+ static void phylink_resolve(struct work_struct *w)
+ {
+ struct phylink *pl = container_of(w, struct phylink, resolve);
+@@ -290,6 +343,7 @@ static void phylink_resolve(struct work_
+ switch (pl->link_an_mode) {
+ case MLO_AN_PHY:
+ link_state = pl->phy_state;
++ phylink_resolve_flow(pl, &link_state);
+ break;
+
+ case MLO_AN_FIXED:
+@@ -298,9 +352,12 @@ static void phylink_resolve(struct work_
+
+ case MLO_AN_SGMII:
+ phylink_get_mac_state(pl, &link_state);
+- if (pl->phydev)
++ if (pl->phydev) {
+ link_state.link = link_state.link &&
+ pl->phy_state.link;
++ link_state.pause |= pl->phy_state.pause;
++ phylink_resolve_flow(pl, &link_state);
++ }
+ break;
+
+ case MLO_AN_8023Z:
+@@ -330,7 +387,7 @@ static void phylink_resolve(struct work_
+ "Link is Up - %s/%s - flow control %s\n",
+ phy_speed_to_str(link_state.speed),
+ phy_duplex_to_str(link_state.duplex),
+- link_state.pause ? "rx/tx" : "off");
++ phylink_pause_to_str(link_state.pause));
+ }
+ }
+ mutex_unlock(&pl->state_mutex);
+@@ -358,6 +415,7 @@ struct phylink *phylink_create(struct ne
+ pl->netdev = ndev;
+ pl->link_interface = iface;
+ pl->link_port = PORT_MII;
++ pl->link_config.pause = MLO_PAUSE_AN;
+ pl->link_config.speed = SPEED_UNKNOWN;
+ pl->link_config.duplex = DUPLEX_UNKNOWN;
+ pl->ops = ops;
+@@ -580,6 +638,7 @@ void phylink_start(struct phylink *pl)
+ * a fixed-link to start with the correct parameters, and also
+ * ensures that we set the appropriate advertisment for Serdes links.
+ */
++ phylink_resolve_flow(pl, &pl->link_config);
+ phylink_mac_config(pl, &pl->link_config);
+
+ clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
+@@ -797,6 +856,79 @@ int phylink_ethtool_nway_reset(struct ph
+ }
+ EXPORT_SYMBOL_GPL(phylink_ethtool_nway_reset);
+
++void phylink_ethtool_get_pauseparam(struct phylink *pl,
++ struct ethtool_pauseparam *pause)
++{
++ mutex_lock(&pl->config_mutex);
++
++ pause->autoneg = !!(pl->link_config.pause & MLO_PAUSE_AN);
++ pause->rx_pause = !!(pl->link_config.pause & MLO_PAUSE_RX);
++ pause->tx_pause = !!(pl->link_config.pause & MLO_PAUSE_TX);
++
++ mutex_unlock(&pl->config_mutex);
++}
++EXPORT_SYMBOL_GPL(phylink_ethtool_get_pauseparam);
++
++static int __phylink_ethtool_set_pauseparam(struct phylink *pl,
++ struct ethtool_pauseparam *pause)
++{
++ struct phylink_link_state *config = &pl->link_config;
++
++ if (!phylink_test(pl->supported, Pause) &&
++ !phylink_test(pl->supported, Asym_Pause))
++ return -EOPNOTSUPP;
++
++ if (!phylink_test(pl->supported, Asym_Pause) &&
++ !pause->autoneg && pause->rx_pause != pause->tx_pause)
++ return -EINVAL;
++
++ config->pause &= ~(MLO_PAUSE_AN | MLO_PAUSE_TXRX_MASK);
++
++ if (pause->autoneg)
++ config->pause |= MLO_PAUSE_AN;
++ if (pause->rx_pause)
++ config->pause |= MLO_PAUSE_RX;
++ if (pause->tx_pause)
++ config->pause |= MLO_PAUSE_TX;
++
++ if (!test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) {
++ switch (pl->link_an_mode) {
++ case MLO_AN_PHY:
++ /* Silently mark the carrier down, and then trigger a resolve */
++ netif_carrier_off(pl->netdev);
++ phylink_run_resolve(pl);
++ break;
++
++ case MLO_AN_FIXED:
++ /* Should we allow fixed links to change against the config? */
++ phylink_resolve_flow(pl, config);
++ phylink_mac_config(pl, config);
++ break;
++
++ case MLO_AN_SGMII:
++ case MLO_AN_8023Z:
++ phylink_mac_config(pl, config);
++ phylink_mac_an_restart(pl);
++ break;
++ }
++ }
++
++ return 0;
++}
++
++int phylink_ethtool_set_pauseparam(struct phylink *pl,
++ struct ethtool_pauseparam *pause)
++{
++ int ret;
++
++ mutex_lock(&pl->config_mutex);
++ ret = __phylink_ethtool_set_pauseparam(pl, pause);
++ mutex_unlock(&pl->config_mutex);
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(phylink_ethtool_set_pauseparam);
++
+ /* This emulates MII registers for a fixed-mode phy operating as per the
+ * passed in state. "aneg" defines if we report negotiation is possible.
+ *
+--- a/include/linux/phylink.h
++++ b/include/linux/phylink.h
+@@ -13,6 +13,10 @@ enum {
+ MLO_PAUSE_NONE,
+ MLO_PAUSE_ASYM = BIT(0),
+ MLO_PAUSE_SYM = BIT(1),
++ MLO_PAUSE_RX = BIT(2),
++ MLO_PAUSE_TX = BIT(3),
++ MLO_PAUSE_TXRX_MASK = MLO_PAUSE_TX | MLO_PAUSE_RX,
++ MLO_PAUSE_AN = BIT(4),
+
+ MLO_AN_PHY = 0,
+ MLO_AN_FIXED,
+@@ -87,6 +91,10 @@ int phylink_ethtool_ksettings_get(struct
+ int phylink_ethtool_ksettings_set(struct phylink *,
+ const struct ethtool_link_ksettings *);
+ int phylink_ethtool_nway_reset(struct phylink *);
++void phylink_ethtool_get_pauseparam(struct phylink *,
++ struct ethtool_pauseparam *);
++int phylink_ethtool_set_pauseparam(struct phylink *,
++ struct ethtool_pauseparam *);
+ int phylink_mii_ioctl(struct phylink *, struct ifreq *, int);
+
+ int phylink_set_link(struct phylink *pl, unsigned int mode, u8 port,
diff --git a/target/linux/mvebu/patches-4.9/424-net-mvneta-add-flow-control-support-via-phylink.patch b/target/linux/mvebu/patches-4.9/424-net-mvneta-add-flow-control-support-via-phylink.patch
new file mode 100644
index 0000000000..b46359ccc8
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/424-net-mvneta-add-flow-control-support-via-phylink.patch
@@ -0,0 +1,76 @@
+From: Russell King <rmk+kernel@arm.linux.org.uk>
+Date: Thu, 1 Oct 2015 17:41:44 +0100
+Subject: [PATCH] net: mvneta: add flow control support via phylink
+
+Add flow control support to mvneta, including the ethtool hooks. This
+uses the phylink code to calculate the result of autonegotiation where
+a phy is attached, and to handle the ethtool settings.
+
+Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
+---
+
+--- a/drivers/net/ethernet/marvell/mvneta.c
++++ b/drivers/net/ethernet/marvell/mvneta.c
+@@ -3180,6 +3180,12 @@ static int mvneta_mac_link_state(struct
+ state->link = !!(gmac_stat & MVNETA_GMAC_LINK_UP);
+ state->duplex = !!(gmac_stat & MVNETA_GMAC_FULL_DUPLEX);
+
++ state->pause = 0;
++ if (gmac_stat & MVNETA_GMAC_RX_FLOW_CTRL_ENABLE)
++ state->pause |= MLO_PAUSE_RX;
++ if (gmac_stat & MVNETA_GMAC_TX_FLOW_CTRL_ENABLE)
++ state->pause |= MLO_PAUSE_TX;
++
+ return 1;
+ }
+
+@@ -3222,6 +3228,8 @@ static void mvneta_mac_config(struct net
+
+ if (phylink_test(state->advertising, Pause))
+ new_an |= MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL;
++ if (state->pause & MLO_PAUSE_TXRX_MASK)
++ new_an |= MVNETA_GMAC_CONFIG_FLOW_CTRL;
+
+ switch (mode) {
+ case MLO_AN_SGMII:
+@@ -3246,7 +3254,7 @@ static void mvneta_mac_config(struct net
+ /* The MAC only supports FD mode */
+ MVNETA_GMAC_CONFIG_FULL_DUPLEX;
+
+- if (state->an_enabled)
++ if (state->pause & MLO_PAUSE_AN && state->an_enabled)
+ new_an |= MVNETA_GMAC_AN_FLOW_CTRL_EN;
+ break;
+
+@@ -3712,6 +3720,22 @@ static int mvneta_ethtool_set_ringparam(
+ return 0;
+ }
+
++static void mvneta_ethtool_get_pauseparam(struct net_device *dev,
++ struct ethtool_pauseparam *pause)
++{
++ struct mvneta_port *pp = netdev_priv(dev);
++
++ phylink_ethtool_get_pauseparam(pp->phylink, pause);
++}
++
++static int mvneta_ethtool_set_pauseparam(struct net_device *dev,
++ struct ethtool_pauseparam *pause)
++{
++ struct mvneta_port *pp = netdev_priv(dev);
++
++ return phylink_ethtool_set_pauseparam(pp->phylink, pause);
++}
++
+ static void mvneta_ethtool_get_strings(struct net_device *netdev, u32 sset,
+ u8 *data)
+ {
+@@ -3903,6 +3927,8 @@ const struct ethtool_ops mvneta_eth_tool
+ .get_drvinfo = mvneta_ethtool_get_drvinfo,
+ .get_ringparam = mvneta_ethtool_get_ringparam,
+ .set_ringparam = mvneta_ethtool_set_ringparam,
++ .get_pauseparam = mvneta_ethtool_get_pauseparam,
++ .set_pauseparam = mvneta_ethtool_set_pauseparam,
+ .get_strings = mvneta_ethtool_get_strings,
+ .get_ethtool_stats = mvneta_ethtool_get_stats,
+ .get_sset_count = mvneta_ethtool_get_sset_count,
diff --git a/target/linux/mvebu/patches-4.9/425-net-mvneta-enable-flow-control-for-PHY-connections.patch b/target/linux/mvebu/patches-4.9/425-net-mvneta-enable-flow-control-for-PHY-connections.patch
new file mode 100644
index 0000000000..a4ba988198
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/425-net-mvneta-enable-flow-control-for-PHY-connections.patch
@@ -0,0 +1,28 @@
+From: Russell King <rmk+kernel@arm.linux.org.uk>
+Date: Thu, 1 Oct 2015 00:34:08 +0100
+Subject: [PATCH] net: mvneta: enable flow control for PHY connections
+
+Enable flow control support for PHY connections by indicating our
+support via the ethtool capabilities. phylink takes care of the
+appropriate handling.
+
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
+---
+
+--- a/drivers/net/ethernet/marvell/mvneta.c
++++ b/drivers/net/ethernet/marvell/mvneta.c
+@@ -3154,10 +3154,11 @@ static void mvneta_validate_support(stru
+ phylink_set(mask, 10baseT_Full);
+ phylink_set(mask, 100baseT_Half);
+ phylink_set(mask, 100baseT_Full);
+- } else {
+- phylink_set(mask, Pause);
+ }
+
++ if (mode != MLO_AN_FIXED)
++ phylink_set(mask, Pause);
++
+ bitmap_and(support, support, mask, __ETHTOOL_LINK_MODE_MASK_NBITS);
+ }
+
diff --git a/target/linux/mvebu/patches-4.9/426-net-mvneta-enable-flow-control-for-fixed-connections.patch b/target/linux/mvebu/patches-4.9/426-net-mvneta-enable-flow-control-for-fixed-connections.patch
new file mode 100644
index 0000000000..9c1d36328a
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/426-net-mvneta-enable-flow-control-for-fixed-connections.patch
@@ -0,0 +1,32 @@
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Tue, 12 Jul 2016 00:04:13 +0100
+Subject: [PATCH] net: mvneta: enable flow control for fixed connections
+
+Allow symetric flow control to be enabled for fixed link connections as
+well as other types of connections by setting the supported and
+advertised capability bits.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+
+--- a/drivers/net/ethernet/marvell/mvneta.c
++++ b/drivers/net/ethernet/marvell/mvneta.c
+@@ -3144,6 +3144,8 @@ static void mvneta_validate_support(stru
+ phylink_set(mask, BNC);
+ phylink_set(mask, Backplane);
+
++ /* Asymmetric pause is unsupported */
++ phylink_set(mask, Pause);
+ /* Half-duplex at speeds higher than 100Mbit is unsupported */
+ phylink_set(mask, 1000baseT_Full);
+ phylink_set(mask, 1000baseX_Full);
+@@ -3156,9 +3158,6 @@ static void mvneta_validate_support(stru
+ phylink_set(mask, 100baseT_Full);
+ }
+
+- if (mode != MLO_AN_FIXED)
+- phylink_set(mask, Pause);
+-
+ bitmap_and(support, support, mask, __ETHTOOL_LINK_MODE_MASK_NBITS);
+ }
+
diff --git a/target/linux/mvebu/patches-4.9/427-phylink-add-EEE-support.patch b/target/linux/mvebu/patches-4.9/427-phylink-add-EEE-support.patch
new file mode 100644
index 0000000000..27bae047b9
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/427-phylink-add-EEE-support.patch
@@ -0,0 +1,116 @@
+From: Russell King <rmk+kernel@arm.linux.org.uk>
+Date: Thu, 1 Oct 2015 21:19:53 +0100
+Subject: [PATCH] phylink: add EEE support
+
+Add EEE hooks to phylink to allow the phylib EEE functions for the
+connected phy to be safely accessed.
+
+Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
+---
+
+--- a/drivers/net/ethernet/marvell/mvneta.c
++++ b/drivers/net/ethernet/marvell/mvneta.c
+@@ -3306,7 +3306,8 @@ static void mvneta_mac_link_down(struct
+ }
+ }
+
+-static void mvneta_mac_link_up(struct net_device *ndev, unsigned int mode)
++static void mvneta_mac_link_up(struct net_device *ndev, unsigned int mode,
++ struct phy_device *phy)
+ {
+ struct mvneta_port *pp = netdev_priv(ndev);
+ u32 val;
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -379,7 +379,8 @@ static void phylink_resolve(struct work_
+ if (pl->phydev)
+ phylink_mac_config(pl, &link_state);
+
+- pl->ops->mac_link_up(ndev, pl->link_an_mode);
++ pl->ops->mac_link_up(ndev, pl->link_an_mode,
++ pl->phydev);
+
+ netif_carrier_on(ndev);
+
+@@ -929,6 +930,58 @@ int phylink_ethtool_set_pauseparam(struc
+ }
+ EXPORT_SYMBOL_GPL(phylink_ethtool_set_pauseparam);
+
++int phylink_init_eee(struct phylink *pl, bool clk_stop_enable)
++{
++ int ret = -EPROTONOSUPPORT;
++
++ mutex_lock(&pl->config_mutex);
++ if (pl->phydev)
++ ret = phy_init_eee(pl->phydev, clk_stop_enable);
++ mutex_unlock(&pl->config_mutex);
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(phylink_init_eee);
++
++int phylink_get_eee_err(struct phylink *pl)
++{
++ int ret = 0;
++
++ mutex_lock(&pl->config_mutex);
++ if (pl->phydev)
++ ret = phy_get_eee_err(pl->phydev);
++ mutex_unlock(&pl->config_mutex);
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(phylink_get_eee_err);
++
++int phylink_ethtool_get_eee(struct phylink *pl, struct ethtool_eee *eee)
++{
++ int ret = -EOPNOTSUPP;
++
++ mutex_lock(&pl->config_mutex);
++ if (pl->phydev)
++ ret = phy_ethtool_get_eee(pl->phydev, eee);
++ mutex_unlock(&pl->config_mutex);
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(phylink_ethtool_get_eee);
++
++int phylink_ethtool_set_eee(struct phylink *pl, struct ethtool_eee *eee)
++{
++ int ret = -EOPNOTSUPP;
++
++ mutex_lock(&pl->config_mutex);
++ if (pl->phydev)
++ ret = phy_ethtool_set_eee(pl->phydev, eee);
++ mutex_unlock(&pl->config_mutex);
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(phylink_ethtool_set_eee);
++
+ /* This emulates MII registers for a fixed-mode phy operating as per the
+ * passed in state. "aneg" defines if we report negotiation is possible.
+ *
+--- a/include/linux/phylink.h
++++ b/include/linux/phylink.h
+@@ -70,7 +70,8 @@ struct phylink_mac_ops {
+ void (*mac_an_restart)(struct net_device *, unsigned int mode);
+
+ void (*mac_link_down)(struct net_device *, unsigned int mode);
+- void (*mac_link_up)(struct net_device *, unsigned int mode);
++ void (*mac_link_up)(struct net_device *, unsigned int mode,
++ struct phy_device *);
+ };
+
+ struct phylink *phylink_create(struct net_device *, struct device_node *,
+@@ -95,6 +96,10 @@ void phylink_ethtool_get_pauseparam(stru
+ struct ethtool_pauseparam *);
+ int phylink_ethtool_set_pauseparam(struct phylink *,
+ struct ethtool_pauseparam *);
++int phylink_init_eee(struct phylink *, bool);
++int phylink_get_eee_err(struct phylink *);
++int phylink_ethtool_get_eee(struct phylink *, struct ethtool_eee *);
++int phylink_ethtool_set_eee(struct phylink *, struct ethtool_eee *);
+ int phylink_mii_ioctl(struct phylink *, struct ifreq *, int);
+
+ int phylink_set_link(struct phylink *pl, unsigned int mode, u8 port,
diff --git a/target/linux/mvebu/patches-4.9/428-net-mvneta-add-EEE-support.patch b/target/linux/mvebu/patches-4.9/428-net-mvneta-add-EEE-support.patch
new file mode 100644
index 0000000000..a8bafd9dd0
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/428-net-mvneta-add-EEE-support.patch
@@ -0,0 +1,179 @@
+From: Russell King <rmk+kernel@arm.linux.org.uk>
+Date: Tue, 29 Sep 2015 15:17:39 +0100
+Subject: [PATCH] net: mvneta: add EEE support
+
+Add EEE support to mvneta. This allows us to enable the low power idle
+support at MAC level if there is a PHY attached through phylink which
+supports LPI. The appropriate ethtool support is provided to allow the
+feature to be controlled, including ethtool statistics for EEE wakeup
+errors.
+
+Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
+---
+
+--- a/drivers/net/ethernet/marvell/mvneta.c
++++ b/drivers/net/ethernet/marvell/mvneta.c
+@@ -243,6 +243,12 @@
+ #define MVNETA_TXQ_TOKEN_SIZE_REG(q) (0x3e40 + ((q) << 2))
+ #define MVNETA_TXQ_TOKEN_SIZE_MAX 0x7fffffff
+
++#define MVNETA_LPI_CTRL_0 0x2cc0
++#define MVNETA_LPI_CTRL_1 0x2cc4
++#define MVNETA_LPI_REQUEST_ENABLE BIT(0)
++#define MVNETA_LPI_CTRL_2 0x2cc8
++#define MVNETA_LPI_STATUS 0x2ccc
++
+ #define MVNETA_CAUSE_TXQ_SENT_DESC_ALL_MASK 0xff
+
+ /* Descriptor ring Macros */
+@@ -316,6 +322,11 @@
+ #define MVNETA_RX_GET_BM_POOL_ID(rxd) \
+ (((rxd)->status & MVNETA_RXD_BM_POOL_MASK) >> MVNETA_RXD_BM_POOL_SHIFT)
+
++enum {
++ ETHTOOL_STAT_EEE_WAKEUP,
++ ETHTOOL_MAX_STATS,
++};
++
+ struct mvneta_statistic {
+ unsigned short offset;
+ unsigned short type;
+@@ -324,6 +335,7 @@ struct mvneta_statistic {
+
+ #define T_REG_32 32
+ #define T_REG_64 64
++#define T_SW 1
+
+ static const struct mvneta_statistic mvneta_statistics[] = {
+ { 0x3000, T_REG_64, "good_octets_received", },
+@@ -358,6 +370,7 @@ static const struct mvneta_statistic mvn
+ { 0x304c, T_REG_32, "broadcast_frames_sent", },
+ { 0x3054, T_REG_32, "fc_sent", },
+ { 0x300c, T_REG_32, "internal_mac_transmit_err", },
++ { ETHTOOL_STAT_EEE_WAKEUP, T_SW, "eee_wakeup_errors", },
+ };
+
+ struct mvneta_pcpu_stats {
+@@ -416,6 +429,10 @@ struct mvneta_port {
+ struct mvneta_bm_pool *pool_short;
+ int bm_win_id;
+
++ bool eee_enabled;
++ bool eee_active;
++ bool tx_lpi_enabled;
++
+ u64 ethtool_stats[ARRAY_SIZE(mvneta_statistics)];
+
+ u32 indir[MVNETA_RSS_LU_TABLE_SIZE];
+@@ -3291,6 +3308,18 @@ static void mvneta_mac_config(struct net
+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, new_an);
+ }
+
++static void mvneta_set_eee(struct mvneta_port *pp, bool enable)
++{
++ u32 lpi_ctl1;
++
++ lpi_ctl1 = mvreg_read(pp, MVNETA_LPI_CTRL_1);
++ if (enable)
++ lpi_ctl1 |= MVNETA_LPI_REQUEST_ENABLE;
++ else
++ lpi_ctl1 &= ~MVNETA_LPI_REQUEST_ENABLE;
++ mvreg_write(pp, MVNETA_LPI_CTRL_1, lpi_ctl1);
++}
++
+ static void mvneta_mac_link_down(struct net_device *ndev, unsigned int mode)
+ {
+ struct mvneta_port *pp = netdev_priv(ndev);
+@@ -3304,6 +3333,9 @@ static void mvneta_mac_link_down(struct
+ val |= MVNETA_GMAC_FORCE_LINK_DOWN;
+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+ }
++
++ pp->eee_active = false;
++ mvneta_set_eee(pp, false);
+ }
+
+ static void mvneta_mac_link_up(struct net_device *ndev, unsigned int mode,
+@@ -3320,6 +3352,11 @@ static void mvneta_mac_link_up(struct ne
+ }
+
+ mvneta_port_up(pp);
++
++ if (phy && pp->eee_enabled) {
++ pp->eee_active = phy_init_eee(phy, 0) >= 0;
++ mvneta_set_eee(pp, pp->eee_active && pp->tx_lpi_enabled);
++ }
+ }
+
+ static const struct phylink_mac_ops mvneta_phylink_ops = {
+@@ -3772,6 +3809,13 @@ static void mvneta_ethtool_update_stats(
+ high = readl_relaxed(base + s->offset + 4);
+ val = (u64)high << 32 | low;
+ break;
++ case T_SW:
++ switch (s->offset) {
++ case ETHTOOL_STAT_EEE_WAKEUP:
++ val = phylink_get_eee_err(pp->phylink);
++ break;
++ }
++ break;
+ }
+
+ pp->ethtool_stats[i] += val;
+@@ -3907,6 +3951,47 @@ static u16 mvneta_select_queue(struct ne
+ }
+
+
++static int mvneta_ethtool_get_eee(struct net_device *dev,
++ struct ethtool_eee *eee)
++{
++ struct mvneta_port *pp = netdev_priv(dev);
++ u32 lpi_ctl0;
++
++ lpi_ctl0 = mvreg_read(pp, MVNETA_LPI_CTRL_0);
++
++ eee->eee_enabled = pp->eee_enabled;
++ eee->eee_active = pp->eee_active;
++ eee->tx_lpi_enabled = pp->tx_lpi_enabled;
++ eee->tx_lpi_timer = (lpi_ctl0) >> 8; // * scale;
++
++ return phylink_ethtool_get_eee(pp->phylink, eee);
++}
++
++static int mvneta_ethtool_set_eee(struct net_device *dev,
++ struct ethtool_eee *eee)
++{
++ struct mvneta_port *pp = netdev_priv(dev);
++ u32 lpi_ctl0;
++
++ /* The Armada 37x documents do not give limits for this other than
++ * it being an 8-bit register. */
++ if (eee->tx_lpi_enabled &&
++ (eee->tx_lpi_timer < 0 || eee->tx_lpi_timer > 255))
++ return -EINVAL;
++
++ lpi_ctl0 = mvreg_read(pp, MVNETA_LPI_CTRL_0);
++ lpi_ctl0 &= ~(0xff << 8);
++ lpi_ctl0 |= eee->tx_lpi_timer << 8;
++ mvreg_write(pp, MVNETA_LPI_CTRL_0, lpi_ctl0);
++
++ pp->eee_enabled = eee->eee_enabled;
++ pp->tx_lpi_enabled = eee->tx_lpi_enabled;
++
++ mvneta_set_eee(pp, eee->tx_lpi_enabled && eee->eee_enabled);
++
++ return phylink_ethtool_set_eee(pp->phylink, eee);
++}
++
+ static const struct net_device_ops mvneta_netdev_ops = {
+ .ndo_open = mvneta_open,
+ .ndo_stop = mvneta_stop,
+@@ -3939,6 +4024,8 @@ const struct ethtool_ops mvneta_eth_tool
+ .set_rxfh = mvneta_ethtool_set_rxfh,
+ .get_link_ksettings = mvneta_ethtool_get_link_ksettings,
+ .set_link_ksettings = mvneta_ethtool_set_link_ksettings,
++ .get_eee = mvneta_ethtool_get_eee,
++ .set_eee = mvneta_ethtool_set_eee,
+ };
+
+ /* Initialize hw */
diff --git a/target/linux/mvebu/patches-4.9/429-phylink-add-module-EEPROM-support.patch b/target/linux/mvebu/patches-4.9/429-phylink-add-module-EEPROM-support.patch
new file mode 100644
index 0000000000..88853ca4a4
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/429-phylink-add-module-EEPROM-support.patch
@@ -0,0 +1,123 @@
+From: Russell King <rmk+kernel@arm.linux.org.uk>
+Date: Thu, 1 Oct 2015 23:10:05 +0100
+Subject: [PATCH] phylink: add module EEPROM support
+
+Add support for reading module EEPROMs through phylink.
+
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
+---
+
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -930,6 +930,36 @@ int phylink_ethtool_set_pauseparam(struc
+ }
+ EXPORT_SYMBOL_GPL(phylink_ethtool_set_pauseparam);
+
++int phylink_ethtool_get_module_info(struct phylink *pl,
++ struct ethtool_modinfo *modinfo)
++{
++ int ret = -EOPNOTSUPP;
++
++ mutex_lock(&pl->config_mutex);
++ if (pl->module_ops)
++ ret = pl->module_ops->get_module_info(pl->module_data,
++ modinfo);
++ mutex_unlock(&pl->config_mutex);
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(phylink_ethtool_get_module_info);
++
++int phylink_ethtool_get_module_eeprom(struct phylink *pl,
++ struct ethtool_eeprom *ee, u8 *buf)
++{
++ int ret = -EOPNOTSUPP;
++
++ mutex_lock(&pl->config_mutex);
++ if (pl->module_ops)
++ ret = pl->module_ops->get_module_eeprom(pl->module_data, ee,
++ buf);
++ mutex_unlock(&pl->config_mutex);
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(phylink_ethtool_get_module_eeprom);
++
+ int phylink_init_eee(struct phylink *pl, bool clk_stop_enable)
+ {
+ int ret = -EPROTONOSUPPORT;
+@@ -1115,6 +1145,39 @@ EXPORT_SYMBOL_GPL(phylink_mii_ioctl);
+
+
+
++int phylink_register_module(struct phylink *pl, void *data,
++ const struct phylink_module_ops *ops)
++{
++ int ret = -EBUSY;
++
++ mutex_lock(&pl->config_mutex);
++ if (!pl->module_ops) {
++ pl->module_ops = ops;
++ pl->module_data = data;
++ ret = 0;
++ }
++ mutex_unlock(&pl->config_mutex);
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(phylink_register_module);
++
++int phylink_unregister_module(struct phylink *pl, void *data)
++{
++ int ret = -EINVAL;
++
++ mutex_lock(&pl->config_mutex);
++ if (pl->module_data == data) {
++ pl->module_ops = NULL;
++ pl->module_data = NULL;
++ ret = 0;
++ }
++ mutex_unlock(&pl->config_mutex);
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(phylink_unregister_module);
++
+ void phylink_disable(struct phylink *pl)
+ {
+ set_bit(PHYLINK_DISABLE_LINK, &pl->phylink_disable_state);
+--- a/include/linux/phylink.h
++++ b/include/linux/phylink.h
+@@ -74,6 +74,11 @@ struct phylink_mac_ops {
+ struct phy_device *);
+ };
+
++struct phylink_module_ops {
++ int (*get_module_info)(void *, struct ethtool_modinfo *);
++ int (*get_module_eeprom)(void *, struct ethtool_eeprom *, u8 *);
++};
++
+ struct phylink *phylink_create(struct net_device *, struct device_node *,
+ phy_interface_t iface, const struct phylink_mac_ops *ops);
+ void phylink_destroy(struct phylink *);
+@@ -96,12 +101,19 @@ void phylink_ethtool_get_pauseparam(stru
+ struct ethtool_pauseparam *);
+ int phylink_ethtool_set_pauseparam(struct phylink *,
+ struct ethtool_pauseparam *);
++int phylink_ethtool_get_module_info(struct phylink *, struct ethtool_modinfo *);
++int phylink_ethtool_get_module_eeprom(struct phylink *,
++ struct ethtool_eeprom *, u8 *);
+ int phylink_init_eee(struct phylink *, bool);
+ int phylink_get_eee_err(struct phylink *);
+ int phylink_ethtool_get_eee(struct phylink *, struct ethtool_eee *);
+ int phylink_ethtool_set_eee(struct phylink *, struct ethtool_eee *);
+ int phylink_mii_ioctl(struct phylink *, struct ifreq *, int);
+
++int phylink_register_module(struct phylink *, void *,
++ const struct phylink_module_ops *);
++int phylink_unregister_module(struct phylink *, void *);
++
+ int phylink_set_link(struct phylink *pl, unsigned int mode, u8 port,
+ const unsigned long *support);
+ void phylink_disable(struct phylink *pl);
diff --git a/target/linux/mvebu/patches-4.9/430-net-mvneta-add-module-EEPROM-reading-support.patch b/target/linux/mvebu/patches-4.9/430-net-mvneta-add-module-EEPROM-reading-support.patch
new file mode 100644
index 0000000000..a73aa8502c
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/430-net-mvneta-add-module-EEPROM-reading-support.patch
@@ -0,0 +1,41 @@
+From: Russell King <rmk+kernel@arm.linux.org.uk>
+Date: Thu, 1 Oct 2015 23:32:39 +0100
+Subject: [PATCH] net: mvneta: add module EEPROM reading support
+
+Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
+---
+
+--- a/drivers/net/ethernet/marvell/mvneta.c
++++ b/drivers/net/ethernet/marvell/mvneta.c
+@@ -3951,6 +3951,22 @@ static u16 mvneta_select_queue(struct ne
+ }
+
+
++static int mvneta_ethtool_get_module_info(struct net_device *dev,
++ struct ethtool_modinfo *modinfo)
++{
++ struct mvneta_port *pp = netdev_priv(dev);
++
++ return phylink_ethtool_get_module_info(pp->phylink, modinfo);
++}
++
++static int mvneta_ethtool_get_module_eeprom(struct net_device *dev,
++ struct ethtool_eeprom *ee, u8 *buf)
++{
++ struct mvneta_port *pp = netdev_priv(dev);
++
++ return phylink_ethtool_get_module_eeprom(pp->phylink, ee, buf);
++}
++
+ static int mvneta_ethtool_get_eee(struct net_device *dev,
+ struct ethtool_eee *eee)
+ {
+@@ -4024,6 +4040,8 @@ const struct ethtool_ops mvneta_eth_tool
+ .set_rxfh = mvneta_ethtool_set_rxfh,
+ .get_link_ksettings = mvneta_ethtool_get_link_ksettings,
+ .set_link_ksettings = mvneta_ethtool_set_link_ksettings,
++ .get_module_info = mvneta_ethtool_get_module_info,
++ .get_module_eeprom = mvneta_ethtool_get_module_eeprom,
+ .get_eee = mvneta_ethtool_get_eee,
+ .set_eee = mvneta_ethtool_set_eee,
+ };
diff --git a/target/linux/mvebu/patches-4.9/431-sfp-phylink-hook-up-eeprom-functions.patch b/target/linux/mvebu/patches-4.9/431-sfp-phylink-hook-up-eeprom-functions.patch
new file mode 100644
index 0000000000..9f049aaa44
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/431-sfp-phylink-hook-up-eeprom-functions.patch
@@ -0,0 +1,65 @@
+From: Russell King <rmk+kernel@arm.linux.org.uk>
+Date: Thu, 8 Oct 2015 23:49:47 +0100
+Subject: [PATCH] sfp/phylink: hook up eeprom functions
+
+Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
+---
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -985,11 +985,9 @@ static void sfp_sm_event(struct sfp *sfp
+ mutex_unlock(&sfp->sm_mutex);
+ }
+
+-#if 0
+-static int sfp_phy_module_info(struct phy_device *phy,
+- struct ethtool_modinfo *modinfo)
++static int sfp_module_info(void *priv, struct ethtool_modinfo *modinfo)
+ {
+- struct sfp *sfp = phy->priv;
++ struct sfp *sfp = priv;
+
+ /* locking... and check module is present */
+
+@@ -1003,10 +1001,9 @@ static int sfp_phy_module_info(struct ph
+ return 0;
+ }
+
+-static int sfp_phy_module_eeprom(struct phy_device *phy,
+- struct ethtool_eeprom *ee, u8 *data)
++static int sfp_module_eeprom(void *priv, struct ethtool_eeprom *ee, u8 *data)
+ {
+- struct sfp *sfp = phy->priv;
++ struct sfp *sfp = priv;
+ unsigned int first, last, len;
+ int ret;
+
+@@ -1037,7 +1034,11 @@ static int sfp_phy_module_eeprom(struct
+ }
+ return 0;
+ }
+-#endif
++
++static const struct phylink_module_ops sfp_module_ops = {
++ .get_module_info = sfp_module_info,
++ .get_module_eeprom = sfp_module_eeprom,
++};
+
+ static void sfp_timeout(struct work_struct *work)
+ {
+@@ -1113,6 +1114,7 @@ static int sfp_netdev_notify(struct noti
+ case NETDEV_UNREGISTER:
+ if (sfp->mod_phy && sfp->phylink)
+ phylink_disconnect_phy(sfp->phylink);
++ phylink_unregister_module(sfp->phylink, sfp);
+ sfp->phylink = NULL;
+ dev_put(sfp->ndev);
+ sfp->ndev = NULL;
+@@ -1230,6 +1232,7 @@ static int sfp_probe(struct platform_dev
+ }
+
+ phylink_disable(sfp->phylink);
++ phylink_register_module(sfp->phylink, sfp, &sfp_module_ops);
+ }
+
+ sfp->state = sfp_get_state(sfp);
diff --git a/target/linux/mvebu/patches-4.9/432-phy-marvell-88E1512-add-flow-control-support.patch b/target/linux/mvebu/patches-4.9/432-phy-marvell-88E1512-add-flow-control-support.patch
new file mode 100644
index 0000000000..749d1680ef
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/432-phy-marvell-88E1512-add-flow-control-support.patch
@@ -0,0 +1,24 @@
+From: Russell King <rmk+kernel@arm.linux.org.uk>
+Date: Thu, 1 Oct 2015 00:34:08 +0100
+Subject: [PATCH] phy: marvell: 88E1512: add flow control support
+
+The Marvell PHYs support pause frame advertisments, so we should not be
+masking their support off. Add the necessary flag to the Marvell PHY
+to allow any MAC level pause frame support to be advertised.
+
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
+---
+
+--- a/drivers/net/phy/marvell.c
++++ b/drivers/net/phy/marvell.c
+@@ -1671,7 +1671,8 @@ static struct phy_driver marvell_drivers
+ .phy_id = MARVELL_PHY_ID_88E1510,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1510",
+- .features = PHY_GBIT_FEATURES | SUPPORTED_FIBRE,
++ .features = PHY_GBIT_FEATURES | SUPPORTED_FIBRE |
++ SUPPORTED_Pause,
+ .flags = PHY_HAS_INTERRUPT,
+ .probe = marvell_probe,
+ .config_init = &m88e1510_config_init,
diff --git a/target/linux/mvebu/patches-4.9/433-phy-marvell-88E1111-add-flow-control-support.patch b/target/linux/mvebu/patches-4.9/433-phy-marvell-88E1111-add-flow-control-support.patch
new file mode 100644
index 0000000000..1b8bace560
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/433-phy-marvell-88E1111-add-flow-control-support.patch
@@ -0,0 +1,22 @@
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Tue, 12 Jul 2016 16:45:43 +0100
+Subject: [PATCH] phy: marvell: 88E1111: add flow control support
+
+The Marvell PHYs support pause frame advertisments, so we should not be
+masking their support off. Add the necessary flag to the Marvell PHY
+to allow any MAC level pause frame support to be advertised.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+
+--- a/drivers/net/phy/marvell.c
++++ b/drivers/net/phy/marvell.c
+@@ -1523,7 +1523,7 @@ static struct phy_driver marvell_drivers
+ .phy_id = MARVELL_PHY_ID_88E1111,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1111",
+- .features = PHY_GBIT_FEATURES,
++ .features = PHY_GBIT_FEATURES | SUPPORTED_Pause,
+ .flags = PHY_HAS_INTERRUPT,
+ .probe = marvell_probe,
+ .config_init = &m88e1111_config_init,
diff --git a/target/linux/mvebu/patches-4.9/434-phy-marvell-88E1540-add-flow-control-support.patch b/target/linux/mvebu/patches-4.9/434-phy-marvell-88E1540-add-flow-control-support.patch
new file mode 100644
index 0000000000..95a4f5773e
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/434-phy-marvell-88E1540-add-flow-control-support.patch
@@ -0,0 +1,22 @@
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Tue, 12 Jul 2016 16:45:43 +0100
+Subject: [PATCH] phy: marvell: 88E1540: add flow control support
+
+The Marvell PHYs support pause frame advertisments, so we should not be
+masking their support off. Add the necessary flag to the Marvell PHY
+to allow any MAC level pause frame support to be advertised.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+
+--- a/drivers/net/phy/marvell.c
++++ b/drivers/net/phy/marvell.c
+@@ -1691,7 +1691,7 @@ static struct phy_driver marvell_drivers
+ .phy_id = MARVELL_PHY_ID_88E1540,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1540",
+- .features = PHY_GBIT_FEATURES,
++ .features = PHY_GBIT_FEATURES | SUPPORTED_Pause,
+ .flags = PHY_HAS_INTERRUPT,
+ .probe = marvell_probe,
+ .config_init = &marvell_config_init,
diff --git a/target/linux/mvebu/patches-4.9/435-net-phy-fix-marvell-phy-status-reading.patch b/target/linux/mvebu/patches-4.9/435-net-phy-fix-marvell-phy-status-reading.patch
new file mode 100644
index 0000000000..f0fe26e3d0
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/435-net-phy-fix-marvell-phy-status-reading.patch
@@ -0,0 +1,26 @@
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Fri, 23 Dec 2016 18:54:01 +0000
+Subject: [PATCH] net: phy: fix marvell phy status reading
+
+The Marvell driver incorrectly provides phydev->lp_advertising as the
+logical and of the link partner's advert and our advert. This is
+incorrect - this field is supposed to store the link parter's unmodified
+advertisment.
+
+This allows ethtool to report the correct link partner auto-negotiation
+status.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+
+--- a/drivers/net/phy/marvell.c
++++ b/drivers/net/phy/marvell.c
+@@ -1106,8 +1106,6 @@ static int marvell_read_status_page(stru
+ if (adv < 0)
+ return adv;
+
+- lpa &= adv;
+-
+ if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
+ phydev->duplex = DUPLEX_FULL;
+ else
diff --git a/target/linux/mvebu/patches-4.9/436-phylink-propagate-PHY-interface-mode-to-MAC-driver.patch b/target/linux/mvebu/patches-4.9/436-phylink-propagate-PHY-interface-mode-to-MAC-driver.patch
new file mode 100644
index 0000000000..9b872b82d7
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/436-phylink-propagate-PHY-interface-mode-to-MAC-driver.patch
@@ -0,0 +1,126 @@
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Tue, 3 Jan 2017 18:34:17 +0000
+Subject: [PATCH] phylink: propagate PHY interface mode to MAC driver
+
+Some 10Gigabit PHYs automatically switch the mode of their host
+interface depending on their negotiated speed. We need to communicate
+this to the MAC driver so the MAC can switch its host interface to
+match the PHYs new operating mode. Provide the current PHY interface
+mode to the MAC driver.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -242,8 +242,9 @@ static void phylink_mac_config(struct ph
+ const struct phylink_link_state *state)
+ {
+ netdev_dbg(pl->netdev,
+- "%s: mode=%s/%s/%s adv=%*pb pause=%02x link=%u an=%u\n",
++ "%s: mode=%s/%s/%s/%s adv=%*pb pause=%02x link=%u an=%u\n",
+ __func__, phylink_an_mode_str(pl->link_an_mode),
++ phy_modes(state->interface),
+ phy_speed_to_str(state->speed),
+ phy_duplex_to_str(state->duplex),
+ __ETHTOOL_LINK_MODE_MASK_NBITS, state->advertising,
+@@ -264,6 +265,7 @@ static int phylink_get_mac_state(struct
+
+ linkmode_copy(state->advertising, pl->link_config.advertising);
+ linkmode_zero(state->lp_advertising);
++ state->interface = pl->link_config.interface;
+ state->an_enabled = pl->link_config.an_enabled;
+ state->link = 1;
+
+@@ -344,19 +346,38 @@ static void phylink_resolve(struct work_
+ case MLO_AN_PHY:
+ link_state = pl->phy_state;
+ phylink_resolve_flow(pl, &link_state);
++ phylink_mac_config(pl, &link_state);
+ break;
+
+ case MLO_AN_FIXED:
+ phylink_get_fixed_state(pl, &link_state);
++ phylink_mac_config(pl, &link_state);
+ break;
+
+ case MLO_AN_SGMII:
+ phylink_get_mac_state(pl, &link_state);
+ if (pl->phydev) {
++ bool changed = false;
++
+ link_state.link = link_state.link &&
+ pl->phy_state.link;
+- link_state.pause |= pl->phy_state.pause;
+- phylink_resolve_flow(pl, &link_state);
++
++ if (pl->phy_state.interface !=
++ link_state.interface) {
++ link_state.interface = pl->phy_state.interface;
++ changed = true;
++ }
++
++ /* Propagate the flow control from the PHY
++ * to the MAC. Also propagate the interface
++ * if changed.
++ */
++ if (pl->phy_state.link || changed) {
++ link_state.pause |= pl->phy_state.pause;
++ phylink_resolve_flow(pl, &link_state);
++
++ phylink_mac_config(pl, &link_state);
++ }
+ }
+ break;
+
+@@ -372,13 +393,6 @@ static void phylink_resolve(struct work_
+ pl->ops->mac_link_down(ndev, pl->link_an_mode);
+ netdev_info(ndev, "Link is Down\n");
+ } else {
+- /* If we have a PHY, we need the MAC updated with
+- * the current link parameters (eg, in SGMII mode,
+- * with flow control status.)
+- */
+- if (pl->phydev)
+- phylink_mac_config(pl, &link_state);
+-
+ pl->ops->mac_link_up(ndev, pl->link_an_mode,
+ pl->phydev);
+
+@@ -414,8 +428,10 @@ struct phylink *phylink_create(struct ne
+ mutex_init(&pl->config_mutex);
+ INIT_WORK(&pl->resolve, phylink_resolve);
+ pl->netdev = ndev;
++ pl->phy_state.interface = iface;
+ pl->link_interface = iface;
+ pl->link_port = PORT_MII;
++ pl->link_config.interface = iface;
+ pl->link_config.pause = MLO_PAUSE_AN;
+ pl->link_config.speed = SPEED_UNKNOWN;
+ pl->link_config.duplex = DUPLEX_UNKNOWN;
+@@ -471,12 +487,14 @@ void phylink_phy_change(struct phy_devic
+ pl->phy_state.pause |= MLO_PAUSE_SYM;
+ if (phydev->asym_pause)
+ pl->phy_state.pause |= MLO_PAUSE_ASYM;
++ pl->phy_state.interface = phydev->interface;
+ pl->phy_state.link = up;
+ mutex_unlock(&pl->state_mutex);
+
+ phylink_run_resolve(pl);
+
+- netdev_dbg(pl->netdev, "phy link %s %s/%s\n", up ? "up" : "down",
++ netdev_dbg(pl->netdev, "phy link %s %s/%s/%s\n", up ? "up" : "down",
++ phy_modes(phydev->interface),
+ phy_speed_to_str(phydev->speed),
+ phy_duplex_to_str(phydev->duplex));
+ }
+--- a/include/linux/phylink.h
++++ b/include/linux/phylink.h
+@@ -27,6 +27,7 @@ enum {
+ struct phylink_link_state {
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising);
++ phy_interface_t interface; /* PHY_INTERFACE_xxx */
+ int speed;
+ int duplex;
+ int pause;
diff --git a/target/linux/mvebu/patches-4.9/437-phylink-ensure-link-drops-are-reported.patch b/target/linux/mvebu/patches-4.9/437-phylink-ensure-link-drops-are-reported.patch
new file mode 100644
index 0000000000..8544197478
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/437-phylink-ensure-link-drops-are-reported.patch
@@ -0,0 +1,52 @@
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Mon, 19 Dec 2016 12:17:57 +0000
+Subject: [PATCH] phylink: ensure link drops are reported
+
+When the MAC reports a link failure, it can be momentary. Ensure
+that the event is reported by latching the loss of link, so that the
+worker reports link down.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -60,6 +60,8 @@ struct phylink {
+ struct phylink_link_state phy_state;
+ struct work_struct resolve;
+
++ bool mac_link_dropped;
++
+ const struct phylink_module_ops *module_ops;
+ void *module_data;
+ };
+@@ -340,6 +342,9 @@ static void phylink_resolve(struct work_
+
+ mutex_lock(&pl->state_mutex);
+ if (pl->phylink_disable_state) {
++ pl->mac_link_dropped = false;
++ link_state.link = false;
++ } else if (pl->mac_link_dropped) {
+ link_state.link = false;
+ } else {
+ switch (pl->link_an_mode) {
+@@ -405,6 +410,10 @@ static void phylink_resolve(struct work_
+ phylink_pause_to_str(link_state.pause));
+ }
+ }
++ if (!link_state.link && pl->mac_link_dropped) {
++ pl->mac_link_dropped = false;
++ queue_work(system_power_efficient_wq, &pl->resolve);
++ }
+ mutex_unlock(&pl->state_mutex);
+ }
+
+@@ -641,6 +650,8 @@ EXPORT_SYMBOL_GPL(phylink_disconnect_phy
+
+ void phylink_mac_change(struct phylink *pl, bool up)
+ {
++ if (!up)
++ pl->mac_link_dropped = true;
+ phylink_run_resolve(pl);
+ netdev_dbg(pl->netdev, "mac link %s\n", up ? "up" : "down");
+ }
diff --git a/target/linux/mvebu/patches-4.9/450-reprobe_sfp_phy.patch b/target/linux/mvebu/patches-4.9/450-reprobe_sfp_phy.patch
new file mode 100644
index 0000000000..69eaa3773e
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/450-reprobe_sfp_phy.patch
@@ -0,0 +1,119 @@
+From 28baa5e2635285b178326b301f534ed95c65dd01 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Thu, 29 Sep 2016 11:44:39 +0200
+Subject: [PATCH] sfp: retry phy probe if unsuccessful
+
+Some phys seem to take longer than 50 ms to come out of reset, so retry
+until we find a phy.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/net/phy/sfp.c | 38 +++++++++++++++++++++++++-------------
+ 1 file changed, 25 insertions(+), 13 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -491,7 +491,7 @@ static void sfp_sm_phy_detach(struct sfp
+ sfp->mod_phy = NULL;
+ }
+
+-static void sfp_sm_probe_phy(struct sfp *sfp)
++static int sfp_sm_probe_phy(struct sfp *sfp)
+ {
+ struct phy_device *phy;
+ int err;
+@@ -500,12 +500,12 @@ static void sfp_sm_probe_phy(struct sfp
+
+ phy = mdiobus_scan(sfp->i2c_mii, SFP_PHY_ADDR);
+ if (IS_ERR(phy)) {
++ if (PTR_ERR(phy) == -ENODEV) {
++ dev_dbg(sfp->dev, "no PHY detected\n");
++ return -EAGAIN;
++ }
+ dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy));
+- return;
+- }
+- if (!phy) {
+- dev_info(sfp->dev, "no PHY detected\n");
+- return;
++ return PTR_ERR(phy);
+ }
+
+ if (sfp->phylink) {
+@@ -515,12 +515,14 @@ static void sfp_sm_probe_phy(struct sfp
+ phy_device_free(phy);
+ dev_err(sfp->dev, "phylink_connect_phy failed: %d\n",
+ err);
+- return;
++ return err;
+ }
+ }
+
+ sfp->mod_phy = phy;
+ phy_start(phy);
++
++ return 0;
+ }
+
+ static void sfp_sm_link_up(struct sfp *sfp)
+@@ -569,30 +571,41 @@ static void sfp_sm_fault(struct sfp *sfp
+
+ static void sfp_sm_mod_init(struct sfp *sfp)
+ {
++ int ret = 0;
++
+ sfp_module_tx_enable(sfp);
+
+- /* Wait t_init before indicating that the link is up, provided the
+- * current state indicates no TX_FAULT. If TX_FAULT clears before
+- * this time, that's fine too.
+- */
+- sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
+- sfp->sm_retries = 5;
++ if (!sfp->phylink)
++ return;
+
+- if (sfp->phylink) {
+- /* Setting the serdes link mode is guesswork: there's no
+- * field in the EEPROM which indicates what mode should
+- * be used.
+- *
+- * If it's a gigabit-only fiber module, it probably does
+- * not have a PHY, so switch to 802.3z negotiation mode.
+- * Otherwise, switch to SGMII mode (which is required to
+- * support non-gigabit speeds) and probe for a PHY.
++ /* Setting the serdes link mode is guesswork: there's no
++ * field in the EEPROM which indicates what mode should
++ * be used.
++ *
++ * If it's a gigabit-only fiber module, it probably does
++ * not have a PHY, so switch to 802.3z negotiation mode.
++ * Otherwise, switch to SGMII mode (which is required to
++ * support non-gigabit speeds) and probe for a PHY.
++ */
++ if (sfp->id.base.e1000_base_t ||
++ sfp->id.base.e100_base_lx ||
++ sfp->id.base.e100_base_fx)
++ ret = sfp_sm_probe_phy(sfp);
++
++ if (!ret) {
++ /* Wait t_init before indicating that the link is up, provided
++ * the current state indicates no TX_FAULT. If TX_FAULT clears
++ * this time, that's fine too.
+ */
+- if (sfp->id.base.e1000_base_t ||
+- sfp->id.base.e100_base_lx ||
+- sfp->id.base.e100_base_fx)
+- sfp_sm_probe_phy(sfp);
++ sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
++ sfp->sm_retries = 5;
++ return;
+ }
++
++ if (ret == -EAGAIN)
++ sfp_sm_set_timer(sfp, T_PROBE_RETRY);
++ else
++ sfp_sm_next(sfp, SFP_S_TX_DISABLE, 0);
+ }
+
+ static int sfp_sm_mod_probe(struct sfp *sfp)