diff options
| author | Vieno Hakkerinen <vieno@hakkerinen.eu> | 2020-07-10 23:23:01 +0200 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-07-15 18:33:56 +0200 |
| commit | 8c7e9cc6b5a026176b1b2cb64ecc8206c7be2b84 (patch) | |
| tree | a048e0e97dad3c7a61646338f4093e2a1beaed24 /target/linux | |
| parent | f886a26851f3f6e82fbd8c11fb0e7ff2f3295c5b (diff) | |
| download | upstream-8c7e9cc6b5a026176b1b2cb64ecc8206c7be2b84.tar.gz upstream-8c7e9cc6b5a026176b1b2cb64ecc8206c7be2b84.tar.bz2 upstream-8c7e9cc6b5a026176b1b2cb64ecc8206c7be2b84.zip | |
ath79: add support for Ubiquiti PowerBridge M
This adds support for the Ubiquiti PowerBridge M, which has the same
board/LEDs as the Bullet M XM, but different case and antennas.
Specifications:
- AR7241 SoC @ 400 MHz
- 64 MB RAM
- 8 MB SPI flash
- 1x 10/100 Mbps Ethernet, 24 Vdc PoE-in
- Internal antenna: 25 dBi
- POWER/LAN green LEDs
- 4x RSSI LEDs (red, orange, green, green)
- UART (115200 8N1) on PCB
Flashing via WebUI:
Upload the factory image via the stock firmware web UI.
Attention: airOS firmware versions >= 5.6 have a new bootloader with
an incompatible partition table!
Please downgrade to <= 5.5 _before_ flashing OpenWrt!
Refer to the device's Wiki page for further information.
Flashing via TFTP:
Same procedure as other Bullet M (XM) boards.
- Use a pointy tool (e.g., pen cap, paper clip) and keep the reset
button on the device or on the PoE supply pressed
- Power on the device via PoE (keep reset button pressed)
- Keep pressing until LEDs flash alternatively LED1+LED3 =>
LED2+LED4 => LED1+LED3, etc.
- Release reset button
- The device starts a TFTP server at 192.168.1.20
- Set a static IP on the computer (e.g., 192.168.1.21/24)
- Upload via tftp the factory image:
$ tftp 192.168.1.20
tftp> bin
tftp> trace
tftp> put openwrt-ath79-generic-xxxxx-ubnt_powerbridge-m-squashfs-factory.bin
Signed-off-by: Vieno Hakkerinen <vieno@hakkerinen.eu>
Diffstat (limited to 'target/linux')
5 files changed, 28 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/ar7241_ubnt_powerbridge-m.dts b/target/linux/ath79/dts/ar7241_ubnt_powerbridge-m.dts new file mode 100644 index 0000000000..3bf9ca4a90 --- /dev/null +++ b/target/linux/ath79/dts/ar7241_ubnt_powerbridge-m.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "ar7241.dtsi" +#include "ar724x_ubnt_xm.dtsi" +#include "ar724x_ubnt_xm_outdoor.dtsi" + +/ { + compatible = "ubnt,powerbridge-m", "ubnt,xm", "qca,ar7241"; + model = "Ubiquiti PowerBridge M"; +}; + +ð1 { + compatible = "syscon", "simple-mfd"; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index f3f8742560..636ff16a17 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -315,6 +315,7 @@ ubnt,nanostation-loco-m-xw|\ ubnt,nanostation-m|\ ubnt,nanostation-m-xw|\ ubnt,picostation-m|\ +ubnt,powerbridge-m|\ ubnt,rocket-m) ucidef_set_rssimon "wlan0" "200000" "1" ucidef_set_led_rssi "rssilow" "RSSILOW" "ubnt:red:link1" "wlan0" "1" "100" diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index f93d914374..e301b6f616 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -63,6 +63,7 @@ ath79_setup_interfaces() ubnt,picostation-m|\ ubnt,powerbeam-5ac-500|\ ubnt,powerbeam-5ac-gen2|\ + ubnt,powerbridge-m|\ ubnt,rocket-m|\ ubnt,unifiac-lite|\ ubnt,unifiac-lr|\ @@ -513,6 +514,7 @@ ath79_setup_macs() ubnt,nanostation-loco-m|\ ubnt,nanostation-m|\ ubnt,picostation-m|\ + ubnt,powerbridge-m|\ ubnt,rocket-m|\ ubnt,unifi) label_mac=$(cat /sys/class/ieee80211/phy0/macaddress) diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 2573f66f4a..90752a8f9b 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -111,6 +111,7 @@ case "$FIRMWARE" in ubnt,nanostation-loco-m|\ ubnt,nanostation-m|\ ubnt,picostation-m|\ + ubnt,powerbridge-m|\ ubnt,rocket-m) caldata_extract "art" 0x1000 0x1000 ;; diff --git a/target/linux/ath79/image/generic-ubnt.mk b/target/linux/ath79/image/generic-ubnt.mk index 3f4cc13916..e9202eadf7 100644 --- a/target/linux/ath79/image/generic-ubnt.mk +++ b/target/linux/ath79/image/generic-ubnt.mk @@ -269,6 +269,15 @@ define Device/ubnt_powerbeam-5ac-gen2 endef TARGET_DEVICES += ubnt_powerbeam-5ac-gen2 +define Device/ubnt_powerbridge-m + $(Device/ubnt-xm) + SOC := ar7241 + DEVICE_MODEL := PowerBridge M + DEVICE_PACKAGES += rssileds + SUPPORTED_DEVICES += bullet-m +endef +TARGET_DEVICES += ubnt_powerbridge-m + define Device/ubnt_rocket-m $(Device/ubnt-xm) SOC := ar7241 |