sunxi: add sata driver for sun[47]i

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39197

5 files changed, 706 insertions, 0 deletions

diff --git a/target/linux/sunxi/config-3.12 b/target/linux/sunxi/config-3.12
index 3b0d0b327b..4158cf6e2e 100644
--- a/target/linux/sunxi/config-3.12
+++ b/target/linux/sunxi/config-3.12
@@ -1,3 +1,4 @@
+# CONFIG_AHCI_SUNXI is not set
 CONFIG_ALIGNMENT_TRAP=y
 # CONFIG_APM_EMULATION is not set
 CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
diff --git a/target/linux/sunxi/modules.mk b/target/linux/sunxi/modules.mk
index 5fffbc7a8b..1a54677046 100644
--- a/target/linux/sunxi/modules.mk
+++ b/target/linux/sunxi/modules.mk
@@ -38,3 +38,19 @@ endef
 
 $(eval $(call KernelPackage,eeprom-sunxi))
 
+define KernelPackage/ata-sunxi
+    TITLE:=AllWinner sunXi AHCI SATA support
+    SUBMENU:=$(BLOCK_MENU)
+    DEPENDS:=@TARGET_sunxi +kmod-scsi-core
+    KCONFIG:=\
+	CONFIG_AHCI_SUNXI \
+	CONFIG_SATA_AHCI_PLATFORM
+    FILES:=$(LINUX_DIR)/drivers/ata/ahci_sunxi.ko
+    AUTOLOAD:=$(call AutoLoad,41,ahci_sunxi,1)
+endef
+
+define KernelPackage/ata-sunxi/description
+ SATA support for the AllWinner sunXi SoC's onboard AHCI SATA
+endef
+
+$(eval $(call KernelPackage,ata-sunxi))
diff --git a/target/linux/sunxi/patches-3.12/190-ahci-missing-dma-for-sunxi.patch b/target/linux/sunxi/patches-3.12/190-ahci-missing-dma-for-sunxi.patch
new file mode 100644
index 0000000000..c7a529967b
--- /dev/null
+++ b/target/linux/sunxi/patches-3.12/190-ahci-missing-dma-for-sunxi.patch
@@ -0,0 +1,60 @@
+From a4c21089299ba411d998b16423a76cbae111194e Mon Sep 17 00:00:00 2001
+From: Oliver Schinagl <oliver@schinagl.nl>
+Date: Mon, 2 Dec 2013 16:13:32 +0100
+Subject: [PATCH] RFC: AHCI: libahci is missing DMA
+
+The Allwinner sunxi platforms have patched in the following to enable
+DMA. This patch enables DMA controllers for the SUNXI Architecture.
+
+Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
+---
+ drivers/ata/ahci.h    | 6 ++++++
+ drivers/ata/libahci.c | 8 ++++++++
+ 2 files changed, 14 insertions(+)
+
+diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
+index 2289efd..2bf2423 100644
+--- a/drivers/ata/ahci.h
++++ b/drivers/ata/ahci.h
+@@ -138,6 +138,7 @@ enum {
+ 	PORT_SCR_NTF		= 0x3c, /* SATA phy register: SNotification */
+ 	PORT_FBS		= 0x40, /* FIS-based Switching */
+ 	PORT_DEVSLP		= 0x44, /* device sleep */
++	PORT_DMA		= 0x70, /* direct memory access */
+ 
+ 	/* PORT_IRQ_{STAT,MASK} bits */
+ 	PORT_IRQ_COLD_PRES	= (1 << 31), /* cold presence detect */
+@@ -209,6 +210,11 @@ enum {
+ 	PORT_DEVSLP_DSP		= (1 << 1),       /* DevSlp present */
+ 	PORT_DEVSLP_ADSE	= (1 << 0),       /* Aggressive DevSlp enable */
+ 
++	/* PORT_DMA bits */
++	PORT_DMA_SETUP_OFFSET	= 8, /* dma setup offset */
++	PORT_DMA_SETUP_MASK	= (0xff << PORT_DMA_SETUP_OFFSET),/* dma mask */
++	PORT_DMA_SETUP_INIT	= (0x44 << 0),
++
+ 	/* hpriv->flags bits */
+ 
+ #define AHCI_HFLAGS(flags)		.private_data	= (void *)(flags)
+diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
+index c482f8c..d697a74 100644
+--- a/drivers/ata/libahci.c
++++ b/drivers/ata/libahci.c
+@@ -570,6 +570,14 @@ void ahci_start_engine(struct ata_port *ap)
+ 	void __iomem *port_mmio = ahci_port_base(ap);
+ 	u32 tmp;
+ 
++#ifdef CONFIG_ARCH_SUNXI
++	/* Setup DMA before DMA start */
++	tmp = readl(port_mmio + PORT_DMA);
++	tmp &= ~PORT_DMA_SETUP_MASK;
++	tmp |= PORT_DMA_SETUP_INIT << PORT_DMA_SETUP_OFFSET;
++	writel(tmp, port_mmio + PORT_DMA);
++#endif
++
+ 	/* start DMA */
+ 	tmp = readl(port_mmio + PORT_CMD);
+ 	tmp |= PORT_CMD_START;
+-- 
+1.8.5.1
+
diff --git a/target/linux/sunxi/patches-3.12/191-add-sunxi-ahci.patch b/target/linux/sunxi/patches-3.12/191-add-sunxi-ahci.patch
new file mode 100644
index 0000000000..9034be3101
--- /dev/null
+++ b/target/linux/sunxi/patches-3.12/191-add-sunxi-ahci.patch
@@ -0,0 +1,436 @@
+From b7f492ca20e480ea3402692e165f919f20145935 Mon Sep 17 00:00:00 2001
+From: Oliver Schinagl <oliver@schinagl.nl>
+Date: Tue, 3 Dec 2013 12:07:01 +0100
+Subject: [PATCH] ARM: sunxi: Add an ahci-platform compatible AHCI driver for
+ the Allwinner SUNXi series of SoCs
+
+This patch adds support for the sunxi series of SoC's by allwinner. It
+plugs into the ahci-platform framework.
+
+Note: Currently it uses a somewhat hackish approach that probably needs
+a lot more work, but does the same as the IMX SoC's.
+
+Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
+---
+ .../devicetree/bindings/ata/ahci-sunxi.txt         |  24 ++
+ drivers/ata/Kconfig                                |   9 +
+ drivers/ata/Makefile                               |   1 +
+ drivers/ata/ahci_platform.c                        |  12 +
+ drivers/ata/ahci_sunxi.c                           | 305 +++++++++++++++++++++
+ 5 files changed, 351 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/ata/ahci-sunxi.txt
+ create mode 100644 drivers/ata/ahci_sunxi.c
+
+diff --git a/Documentation/devicetree/bindings/ata/ahci-sunxi.txt b/Documentation/devicetree/bindings/ata/ahci-sunxi.txt
+new file mode 100644
+index 0000000..0792fa5
+--- /dev/null
++++ b/Documentation/devicetree/bindings/ata/ahci-sunxi.txt
+@@ -0,0 +1,24 @@
++Allwinner SUNXI AHCI SATA Controller
++
++SATA nodes are defined to describe on-chip Serial ATA controllers.
++Each SATA controller should have its own node.
++
++Required properties:
++- compatible	: compatible list, contains "allwinner,sun4i-a10-ahci"
++- reg		: <registers mapping>
++- interrupts	: <interrupt mapping for AHCI IRQ>
++- clocks	: clocks for ACHI
++- clock-names	: clock names for AHCI
++
++Optional properties:
++- pwr-supply	: regulator to control the power supply GPIO
++
++Example:
++	ahci@01c18000 {
++		compatible = "allwinner,sun4i-a10-ahci";
++		reg = <0x01c18000 0x1000>;
++		interrupts = <0 56 1>;
++		clocks = <&ahb_gates 25>, <&pll6 0>;
++		clock-names = "ahb_sata", "pll6_sata";
++		pwr-supply = <&reg_ahci_5v>;
++	};
+diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
+index 4e73772..b87e2ba 100644
+--- a/drivers/ata/Kconfig
++++ b/drivers/ata/Kconfig
+@@ -106,6 +106,15 @@ config AHCI_IMX
+ 
+ 	  If unsure, say N.
+ 
++config AHCI_SUNXI
++	tristate "Allwinner sunxi AHCI SATA support"
++	depends on SATA_AHCI_PLATFORM && ARCH_SUNXI
++	help
++	  This option enables support for the Allwinner sunxi SoC's
++	  onboard AHCI SATA.
++
++	  If unsure, say N.
++
+ config SATA_FSL
+ 	tristate "Freescale 3.0Gbps SATA support"
+ 	depends on FSL_SOC
+diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
+index 46518c6..246050b 100644
+--- a/drivers/ata/Makefile
++++ b/drivers/ata/Makefile
+@@ -11,6 +11,7 @@ obj-$(CONFIG_SATA_SIL24)	+= sata_sil24.o
+ obj-$(CONFIG_SATA_DWC)		+= sata_dwc_460ex.o
+ obj-$(CONFIG_SATA_HIGHBANK)	+= sata_highbank.o libahci.o
+ obj-$(CONFIG_AHCI_IMX)		+= ahci_imx.o
++obj-$(CONFIG_AHCI_SUNXI)	+= ahci_sunxi.o
+ 
+ # SFF w/ custom DMA
+ obj-$(CONFIG_PDC_ADMA)		+= pdc_adma.o
+diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
+index 4b231ba..1046b44 100644
+--- a/drivers/ata/ahci_platform.c
++++ b/drivers/ata/ahci_platform.c
+@@ -31,6 +31,7 @@ enum ahci_type {
+ 	AHCI,		/* standard platform ahci */
+ 	IMX53_AHCI,	/* ahci on i.mx53 */
+ 	STRICT_AHCI,	/* delayed DMA engine start */
++	SUNXI_AHCI,	/* ahci on sunxi */
+ };
+ 
+ static struct platform_device_id ahci_devtype[] = {
+@@ -44,6 +45,9 @@ enum ahci_type {
+ 		.name = "strict-ahci",
+ 		.driver_data = STRICT_AHCI,
+ 	}, {
++		.name = "sunxi-ahci",
++		.driver_data = SUNXI_AHCI,
++	}, {
+ 		/* sentinel */
+ 	}
+ };
+@@ -81,6 +85,14 @@ struct ata_port_operations ahci_platform_ops = {
+ 		.udma_mask	= ATA_UDMA6,
+ 		.port_ops	= &ahci_platform_ops,
+ 	},
++	[SUNXI_AHCI] = {
++		AHCI_HFLAGS	(AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI |
++				 AHCI_HFLAG_NO_PMP | AHCI_HFLAG_YES_NCQ),
++		.flags		= AHCI_FLAG_COMMON,
++		.pio_mask	= ATA_PIO4,
++		.udma_mask	= ATA_UDMA6,
++		.port_ops	= &ahci_platform_ops,
++	},
+ };
+ 
+ static struct scsi_host_template ahci_platform_sht = {
+diff --git a/drivers/ata/ahci_sunxi.c b/drivers/ata/ahci_sunxi.c
+new file mode 100644
+index 0000000..982641f
+--- /dev/null
++++ b/drivers/ata/ahci_sunxi.c
+@@ -0,0 +1,305 @@
++/*
++ * Allwinner sunxi AHCI SATA platform driver
++ * Copyright 2013 Olliver Schinagl <oliver@schinagl.nl>
++ *
++ * Based on the AHCI SATA platform driver by Freescale and Allwinner
++ * Based on code from
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ * Daniel Wang <danielwang@allwinnertech.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms and conditions of the GNU General Public License,
++ * version 2, as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <linux/kernel.h>
++#include <linux/regulator/consumer.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/mod_devicetable.h>
++#include <linux/of_device.h>
++#include <linux/ioport.h>
++#include <linux/device.h>
++#include <linux/gfp.h>
++#include <linux/clk.h>
++#include <linux/clk-provider.h>
++#include <linux/errno.h>
++#include <linux/ahci_platform.h>
++#include "ahci.h"
++
++#define DRV_NAME "sunxi-sata"
++
++#define AHCI_BISTAFR 0x00a0
++#define AHCI_BISTCR 0x00a4
++#define AHCI_BISTFCTR 0x00a8
++#define AHCI_BISTSR 0x00ac
++#define AHCI_BISTDECR 0x00b0
++#define AHCI_DIAGNR0 0x00b4
++#define AHCI_DIAGNR1 0x00b8
++#define AHCI_OOBR 0x00bc
++#define AHCI_PHYCS0R 0x00c0
++#define AHCI_PHYCS1R 0x00c4
++#define AHCI_PHYCS2R 0x00c8
++#define AHCI_TIMER1MS 0x00e0
++#define AHCI_GPARAM1R 0x00e8
++#define AHCI_GPARAM2R 0x00ec
++#define AHCI_PPARAMR 0x00f0
++#define AHCI_TESTR 0x00f4
++#define AHCI_VERSIONR 0x00f8
++#define AHCI_IDR 0x00fc
++#define AHCI_RWCR 0x00fc
++#define AHCI_P0DMACR 0x0170
++#define AHCI_P0PHYCR 0x0178
++#define AHCI_P0PHYSR 0x017c
++
++struct sunxi_ahci_data {
++	struct platform_device *ahci_pdev;
++	struct regulator *regulator;
++	struct clk *sata_clk;
++	struct clk *ahb_clk;
++};
++
++static void sunxi_clrbits(void __iomem *reg, u32 clr_val)
++{
++	u32 reg_val;
++
++	reg_val = readl(reg);
++	reg_val &= ~(clr_val);
++	writel(reg_val, reg);
++}
++
++static void sunxi_setbits(void __iomem *reg, u32 set_val)
++{
++	u32 reg_val;
++
++	reg_val = readl(reg);
++	reg_val |= set_val;
++	writel(reg_val, reg);
++}
++
++static void sunxi_clrsetbits(void __iomem *reg, u32 clr_val, u32 set_val)
++{
++	u32 reg_val;
++
++	reg_val = readl(reg);
++	reg_val &= ~(clr_val);
++	reg_val |= set_val;
++	writel(reg_val, reg);
++}
++
++static u32 sunxi_getbits(void __iomem *reg, u8 mask, u8 shift)
++{
++	return (readl(reg) >> shift) & mask;
++}
++
++static int sunxi_ahci_phy_init(struct device *dev, void __iomem *reg_base)
++{
++	u32 reg_val;
++	int timeout;
++
++	/* This magic is from the original code */
++	writel(0, reg_base + AHCI_RWCR);
++	mdelay(5);
++
++	sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(19));
++	sunxi_clrsetbits(reg_base + AHCI_PHYCS0R,
++			 (0x7 << 24),
++			 (0x5 << 24) | BIT(23) | BIT(18));
++	sunxi_clrsetbits(reg_base + AHCI_PHYCS1R,
++			 (0x3 << 16) | (0x1f << 8) | (0x3 << 6),
++			 (0x2 << 16) | (0x6 << 8) | (0x2 << 6));
++	sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(28) | BIT(15));
++	sunxi_clrbits(reg_base + AHCI_PHYCS1R, BIT(19));
++	sunxi_clrsetbits(reg_base + AHCI_PHYCS0R,
++			 (0x7 << 20), (0x3 << 20));
++	sunxi_clrsetbits(reg_base + AHCI_PHYCS2R,
++			 (0x1f << 5), (0x19 << 5));
++	mdelay(5);
++
++	sunxi_setbits(reg_base + AHCI_PHYCS0R, (0x1 << 19));
++
++	timeout = 0x100000;
++	do {
++		reg_val = sunxi_getbits(reg_base + AHCI_PHYCS0R, 0x7, 28);
++	} while (--timeout && (reg_val != 0x2));
++	if (!timeout)
++		dev_err(dev, "PHY power up failed.\n");
++
++	sunxi_setbits(reg_base + AHCI_PHYCS2R, (0x1 << 24));
++
++	timeout = 0x100000;
++	do {
++		reg_val = sunxi_getbits(reg_base + AHCI_PHYCS2R, 0x1, 24);
++	} while (--timeout && reg_val);
++	if (!timeout)
++		dev_err(dev, "PHY calibration failed.\n");
++	mdelay(15);
++
++	writel(0x7, reg_base + AHCI_RWCR);
++
++	return 0;
++}
++
++static int sunxi_ahci_init(struct device *dev, void __iomem *reg_base)
++{
++	struct sunxi_ahci_data *ahci_data;
++	int ret;
++
++	ahci_data = dev_get_drvdata(dev->parent);
++
++	ret = clk_prepare_enable(ahci_data->sata_clk);
++	if (ret < 0)
++		return ret;
++
++	ret = clk_prepare_enable(ahci_data->ahb_clk);
++	if (ret < 0)
++		return ret;
++
++	ret = regulator_enable(ahci_data->regulator);
++	if (ret)
++		return ret;
++
++	return sunxi_ahci_phy_init(dev, reg_base);
++}
++
++static void sunxi_ahci_exit(struct device *dev)
++{
++	struct sunxi_ahci_data *ahci_data;
++
++	ahci_data = dev_get_drvdata(dev->parent);
++
++	regulator_disable(ahci_data->regulator);
++
++	clk_disable_unprepare(ahci_data->ahb_clk);
++	clk_disable_unprepare(ahci_data->sata_clk);
++}
++
++static struct ahci_platform_data sunxi_ahci_pdata = {
++	.init = sunxi_ahci_init,
++	.exit = sunxi_ahci_exit,
++};
++
++static int sunxi_ahci_remove(struct platform_device *pdev)
++{
++	struct sunxi_ahci_data *ahci_data;
++
++	ahci_data = platform_get_drvdata(pdev);
++	platform_device_unregister(ahci_data->ahci_pdev);
++
++	dev_dbg(&pdev->dev, "driver unloaded\n");
++
++	return 0;
++}
++
++static const struct of_device_id sunxi_ahci_of_match[] = {
++	{ .compatible = "allwinner,sun4i-a10-ahci", .data = &sunxi_ahci_pdata},
++	{/* sentinel */},
++};
++MODULE_DEVICE_TABLE(of, sunxi_ahci_of_match);
++
++static int sunxi_ahci_probe(struct platform_device *pdev)
++{
++	const struct ahci_platform_data *pdata;
++	const struct of_device_id *of_dev_id;
++	struct resource *mem, *irq, res[2];
++	struct platform_device *ahci_pdev;
++	struct sunxi_ahci_data *ahci_data;
++	struct regulator *regulator;
++	int ret;
++
++	regulator = devm_regulator_get(&pdev->dev, "pwr");
++	if (IS_ERR(regulator)) {
++		ret = PTR_ERR(regulator);
++		if (ret != -EPROBE_DEFER)
++			dev_err(&pdev->dev, "no regulator found (%d)\n", ret);
++		return ret;
++	}
++
++	ahci_data = devm_kzalloc(&pdev->dev, sizeof(*ahci_data), GFP_KERNEL);
++	if (!ahci_data)
++		return -ENOMEM;
++
++	ahci_pdev = platform_device_alloc("sunxi-ahci", -1);
++	if (!ahci_pdev)
++		return -ENODEV;
++
++	ahci_pdev->dev.parent = &pdev->dev;
++
++	ahci_data->regulator = regulator;
++	ahci_data->ahb_clk = devm_clk_get(&pdev->dev, "ahb_sata");
++	if (IS_ERR(ahci_data->ahb_clk)) {
++		ret = PTR_ERR(ahci_data->ahb_clk);
++		goto err_out;
++	}
++
++	ahci_data->sata_clk = devm_clk_get(&pdev->dev, "pll6_sata");
++	if (IS_ERR(ahci_data->sata_clk)) {
++		ret = PTR_ERR(ahci_data->sata_clk);
++		goto err_out;
++	}
++
++	ahci_data->ahci_pdev = ahci_pdev;
++	platform_set_drvdata(pdev, ahci_data);
++
++	ahci_pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
++	ahci_pdev->dev.dma_mask = &ahci_pdev->dev.coherent_dma_mask;
++	ahci_pdev->dev.of_node = pdev->dev.of_node;
++
++	of_dev_id = of_match_device(sunxi_ahci_of_match, &pdev->dev);
++	if (of_dev_id) {
++		pdata = of_dev_id->data;
++	} else {
++		ret = -EINVAL;
++		goto err_out;
++	}
++
++	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
++	if (!mem || !irq) {
++		ret = -ENOMEM;
++		goto err_out;
++	}
++	res[0] = *mem;
++	res[1] = *irq;
++	ret = platform_device_add_resources(ahci_pdev, res, 2);
++	if (ret)
++		goto err_out;
++
++	ret = platform_device_add_data(ahci_pdev, pdata, sizeof(*pdata));
++	if (ret)
++		goto err_out;
++
++	ret = platform_device_add(ahci_pdev);
++	if (ret)
++		goto err_out;
++
++	return 0;
++
++err_out:
++	platform_device_put(ahci_pdev);
++	return ret;
++}
++
++static struct platform_driver sunxi_ahci_driver = {
++	.probe = sunxi_ahci_probe,
++	.remove = sunxi_ahci_remove,
++	.driver = {
++		.name = DRV_NAME,
++		.owner = THIS_MODULE,
++		.of_match_table = sunxi_ahci_of_match,
++	},
++};
++module_platform_driver(sunxi_ahci_driver);
++
++MODULE_DESCRIPTION("Allwinner sunxi AHCI SATA platform driver");
++MODULE_AUTHOR("Olliver Schinagl <oliver@schinagl.nl>");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("ahci:sunxi");
+-- 
+1.8.5.1
+
diff --git a/target/linux/sunxi/patches-3.12/192-dt-add-ahci-sun47i.patch b/target/linux/sunxi/patches-3.12/192-dt-add-ahci-sun47i.patch
new file mode 100644
index 0000000000..a9d5056f93
--- /dev/null
+++ b/target/linux/sunxi/patches-3.12/192-dt-add-ahci-sun47i.patch
@@ -0,0 +1,193 @@
+From e5b4d58432bec91414e82069a402d61e6aed631e Mon Sep 17 00:00:00 2001
+From: Oliver Schinagl <oliver@schinagl.nl>
+Date: Tue, 3 Dec 2013 12:10:11 +0100
+Subject: [PATCH] ARM: sunxi: dts: Add ahci support to a few A10 and A20 boards
+
+This patch adds sunxi sata support to A10 and A20 boards that have such
+a connector. Some boards also feature a regulator via a GPIO and support
+for this is also added.
+
+Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
+---
+ arch/arm/boot/dts/sun4i-a10-cubieboard.dts      | 27 +++++++++++++++++++++++++
+ arch/arm/boot/dts/sun4i-a10.dtsi                |  9 +++++++++
+ arch/arm/boot/dts/sun7i-a20-cubieboard2.dts     | 27 +++++++++++++++++++++++++
+ arch/arm/boot/dts/sun7i-a20-cubietruck.dts      | 27 +++++++++++++++++++++++++
+ arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 26 ++++++++++++++++++++++++
+ arch/arm/boot/dts/sun7i-a20.dtsi                |  9 +++++++++
+ 6 files changed, 125 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+index d193937..63bd00d 100644
+--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
++++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+@@ -51,7 +51,19 @@
+ 			status = "okay";
+ 		};
+ 
++		sata: ahci@01c18000 {
++			pwr-supply = <&reg_ahci_5v>;
++			status = "okay";
++		};
++
+ 		pinctrl@01c20800 {
++			ahci_pwr_pin: ahci_pwr_pin@0 {
++				allwinner,pins = "PB8";
++				allwinner,function = "gpio_out";
++				allwinner,drive = <0>;
++				allwinner,pull = <0>;
++			};
++
+ 			mmc0_cd_pin_cubieboard: mmc0_cd_pin@0 {
+ 				allwinner,pins = "PH1";
+ 				allwinner,function = "gpio_in";
+@@ -102,4 +114,19 @@
+ 			linux,default-trigger = "heartbeat";
+ 		};
+ 	};
++
++	regulators {
++		compatible = "simple-bus";
++		pinctrl-names = "default";
++
++		reg_ahci_5v: ahci-5v {
++			compatible = "regulator-fixed";
++			regulator-name = "ahci-5v";
++			regulator-min-microvolt = <5000000>;
++			regulator-max-microvolt = <5000000>;
++			pinctrl-0 = <&ahci_pwr_pin>;
++			gpio = <&pio 1 8 0>;
++			enable-active-high;
++		};
++	};
+ };
+diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
+index 13bccd5..a6dafec 100644
+--- a/arch/arm/boot/dts/sun4i-a10.dtsi
++++ b/arch/arm/boot/dts/sun4i-a10.dtsi
+@@ -315,6 +315,15 @@
+ 			status = "disabled";
+ 		};
+ 
++		sata: ahci@01c18000 {
++			compatible = "allwinner,sun4i-a10-ahci";
++			reg = <0x01c18000 0x1000>;
++			interrupts = <56>;
++			clocks = <&ahb_gates 25>, <&pll6 0>;
++			clock-names = "ahb_sata", "pll6_sata";
++			status = "disabled";
++		};
++
+ 		intc: interrupt-controller@01c20400 {
+ 			compatible = "allwinner,sun4i-ic";
+ 			reg = <0x01c20400 0x400>;
+diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+index ea55563..1d810bb 100644
+--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
++++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+@@ -28,7 +28,19 @@
+ 			status = "okay";
+ 		};
+ 
++		sata: ahci@01c18000 {
++			pwr-supply = <&reg_ahci_5v>;
++			status = "okay";
++		};
++
+ 		pinctrl@01c20800 {
++			ahci_pwr_pin: ahci_pwr_pin@0 {
++				allwinner,pins = "PB8";
++				allwinner,function = "gpio_out";
++				allwinner,drive = <0>;
++				allwinner,pull = <0>;
++			};
++
+ 			mmc0_cd_pin_cubieboard2: mmc0_cd_pin@0 {
+ 				allwinner,pins = "PH1";
+ 				allwinner,function = "gpio_in";
+@@ -86,4 +98,19 @@
+ 			gpios = <&pio 7 20 0>;
+ 		};
+ 	};
++
++	regulators {
++		compatible = "simple-bus";
++		pinctrl-names = "default";
++
++		reg_ahci_5v: ahci-5v {
++			compatible = "regulator-fixed";
++			regulator-name = "ahci-5v";
++			regulator-min-microvolt = <5000000>;
++			regulator-max-microvolt = <5000000>;
++			pinctrl-0 = <&ahci_pwr_pin>;
++			gpio = <&pio 1 8 0>;
++			enable-active-high;
++		};
++	};
+ };
+diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+index bc04cc7..5e9f2ab 100644
+--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
++++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+@@ -37,7 +37,19 @@
+ 			status = "okay";
+ 		};
+ 
++		sata: ahci@01c18000 {
++			pwr-supply = <&reg_ahci_5v>;
++			status = "okay";
++		};
++
+ 		pinctrl@01c20800 {
++			ahci_pwr_pin: ahci_pwr_pin@0 {
++				allwinner,pins = "PB8";
++				allwinner,function = "gpio_out";
++				allwinner,drive = <0>;
++				allwinner,pull = <0>;
++			};
++
+ 			mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
+ 				allwinner,pins = "PH1";
+ 				allwinner,function = "gpio_in";
+@@ -116,4 +128,18 @@
+ 			default-state = "on";
+ 		};
+ 	};
++
++	regulators {
++		compatible = "simple-bus";
++
++		reg_ahci_5v: ahci-5v {
++			compatible = "regulator-fixed";
++			regulator-name = "ahci-5v";
++			regulator-min-microvolt = <5000000>;
++			regulator-max-microvolt = <5000000>;
++			pinctrl-0 = <&ahci_pwr_pin>;
++			gpio = <&pio 1 8 0>;
++			enable-active-high;
++		};
++	};
+ };
+diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
+index 7ebfc89..f161590 100644
+--- a/arch/arm/boot/dts/sun7i-a20.dtsi
++++ b/arch/arm/boot/dts/sun7i-a20.dtsi
+@@ -432,6 +432,15 @@
+ 			};
+ 		};
+ 
++		sata: ahci@01c18000 {
++			compatible = "allwinner,sun4i-a10-ahci";
++			reg = <0x01c18000 0x1000>;
++			interrupts = <0 56 1>;
++			clocks = <&ahb_gates 25>, <&pll6 0>;
++			clock-names = "ahb_sata", "pll6_sata";
++			status = "disabled";
++		};
++
+ 		timer@01c20c00 {
+ 			compatible = "allwinner,sun4i-timer";
+ 			reg = <0x01c20c00 0x90>;
+-- 
+1.8.5.1
+