ramips: express diag led handling via devicetree

Use the default-state property to express the desired led handling in
the devicetree source file instead of the userspace.

Signed-off-by: Mathias Kresin <dev@kresin.me>

6 files changed, 12 insertions, 9 deletions

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 6da04ea9b1..c92712c453 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -117,9 +117,6 @@ d240)
 	set_wifi_led "$boardname:blue:wifi"
 	set_usb_led "$boardname:blue:usb"
 	;;
-dch-m225)
-	ucidef_set_led_default "status" "STATUS" "$board:red:status" "0"
-	;;
 dcs-930l-b1)
 	ucidef_set_led_netdev "wifi" "WiFi" "$boardname:blue:wps"
 	;;
@@ -143,7 +140,6 @@ wt1520-8M)
 	;;
 dir-615-d|\
 dir-615-h1)
-	ucidef_set_led_default "status" "Status LED (amber)" "$boardname:amber:status" "0"
 	set_wifi_led "rt2800pci-phy0::radio"
 	;;
 dir-620-d1|\
@@ -228,7 +224,6 @@ hiwifi,hc5861b)
 	set_wifi_led "$boardname:green:wlan2g"
 	;;
 hpm)
-	ucidef_set_led_default "power" "POWER" "$boardname:orange:power" "1"
 	ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0"
 	set_wifi_led "$boardname:green:wifi"
 	;;
@@ -314,7 +309,6 @@ pbr-d1)
 	;;
 pbr-m1)
 	ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
-	ucidef_set_led_default "sys" "sys" "$boardname:blue:sys" "1"
 	;;
 d-team,newifi-d2)
 	set_usb_led "$boardname:blue:usb"
diff --git a/target/linux/ramips/dts/DCH-M225.dts b/target/linux/ramips/dts/DCH-M225.dts
index 1e32c6d194..b218436929 100644
--- a/target/linux/ramips/dts/DCH-M225.dts
+++ b/target/linux/ramips/dts/DCH-M225.dts
@@ -36,11 +36,13 @@
 		led_power: power {
 			label = "dch-m225:green:power";
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+			default-state = "on";
 		};
 
 		status {
 			label = "dch-m225:red:status";
 			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
 		};
 	};
 
diff --git a/target/linux/ramips/dts/DIR-615-D.dts b/target/linux/ramips/dts/DIR-615-D.dts
index 7931a26fa3..b59ff3c7c2 100644
--- a/target/linux/ramips/dts/DIR-615-D.dts
+++ b/target/linux/ramips/dts/DIR-615-D.dts
@@ -72,11 +72,13 @@
 		status {
 			label = "dir-615-d:amber:status";
 			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+			default-state = "off";
 		};
 
 		led_status_green: status2 {
 			label = "dir-615-d:green:status";
 			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+			default-state = "on";
 		};
 
 		wan {
diff --git a/target/linux/ramips/dts/DIR-615-H1.dts b/target/linux/ramips/dts/DIR-615-H1.dts
index 4bfeb951e5..cbc3dadb74 100644
--- a/target/linux/ramips/dts/DIR-615-H1.dts
+++ b/target/linux/ramips/dts/DIR-615-H1.dts
@@ -19,11 +19,13 @@
 		status {
 			label = "dir-615-h1:amber:status";
 			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
 		};
 
 		led_status_green: status2 {
 			label = "dir-615-h1:green:status";
 			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
 		};
 
 		wan {
diff --git a/target/linux/ramips/dts/HPM.dts b/target/linux/ramips/dts/HPM.dts
index 3a262f2b91..9d50697d88 100644
--- a/target/linux/ramips/dts/HPM.dts
+++ b/target/linux/ramips/dts/HPM.dts
@@ -34,11 +34,13 @@
 		power {
 			label = "hpm:orange:power";
 			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+			default-state = "on";
 		};
 
 		led_status: status {
 			label = "hpm:green:status";
 			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+			default-state = "on";
 		};
 
 		eth {
diff --git a/target/linux/ramips/dts/PBR-M1.dts b/target/linux/ramips/dts/PBR-M1.dts
index 39960481f0..537e5f208f 100644
--- a/target/linux/ramips/dts/PBR-M1.dts
+++ b/target/linux/ramips/dts/PBR-M1.dts
@@ -10,7 +10,7 @@
 	model = "PBR-M1";
 
 	aliases {
-		led-status = &led_power;
+		led-status = &led_sys;
 	};
 
 	memory@0 {
@@ -37,12 +37,13 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		led_power: power {
+		power {
 			label = "pbr-m1:blue:power";
 			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+			default-state = "on";
 		};
 
-		sys {
+		led_sys: sys {
 			label = "pbr-m1:blue:sys";
 			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
 		};