aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorJohn Crispin <john@openwrt.org>2016-03-10 19:12:10 +0000
committerJohn Crispin <john@openwrt.org>2016-03-10 19:12:10 +0000
commitbe7962925927ab5cdc7a13fdb24d1b08792f8f23 (patch)
tree0c17a18e3dbec5c38be2003f1347f9a17ebd8c2f /target/linux
parentbe53e5a154931109dd76a8015583123201c4b602 (diff)
downloadupstream-be7962925927ab5cdc7a13fdb24d1b08792f8f23.tar.gz
upstream-be7962925927ab5cdc7a13fdb24d1b08792f8f23.tar.bz2
upstream-be7962925927ab5cdc7a13fdb24d1b08792f8f23.zip
ramips: Add support for GL-MT750
This patch adds support for GL-MT750. GL-MT750 is powered by MT7620A and MT7610e, dual band 802.11ac, 2.4G 300Mbps and 5G 450Mbps. It has 5 LANs, MMC interface, USB, a lot of IOs and PoE support. SVN-Revision: 48994
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network1
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ramips/dts/GL-MT750.dts159
-rw-r--r--target/linux/ramips/image/Makefile2
-rw-r--r--target/linux/ramips/mt7620/profiles/gli.mk9
7 files changed, 177 insertions, 1 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 132c7cecbb..6c25c86753 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -138,7 +138,8 @@ fonera20n)
set_wifi_led "$board:orange:wifi"
;;
gl-mt300a|\
-gl-mt300n)
+gl-mt300n|\
+gl-mt750)
set_wifi_led "$board:wlan"
;;
hc5661)
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 40c24a9769..dc9b5b2b94 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -115,6 +115,7 @@ ramips_setup_interfaces()
f5d8235-v2|\
gl-mt300a|\
gl-mt300n|\
+ gl-mt750|\
hg255d|\
mzk-wdpr|\
jhr-n805r|\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index fcc4b9fb08..815765a75e 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -181,6 +181,9 @@ ramips_board_detect() {
*"GL-MT300N")
name="gl-mt300n"
;;
+ *"GL-MT750")
+ name="gl-mt750"
+ ;;
*"HC5661")
name="hc5661"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 87278317bb..b1d23471d9 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -58,6 +58,7 @@ platform_check_image() {
freestation5|\
gl-mt300a|\
gl-mt300n|\
+ gl-mt750|\
hc5*61|\
hg255d|\
hlk-rm04|\
diff --git a/target/linux/ramips/dts/GL-MT750.dts b/target/linux/ramips/dts/GL-MT750.dts
new file mode 100644
index 0000000000..a36ae5e4dc
--- /dev/null
+++ b/target/linux/ramips/dts/GL-MT750.dts
@@ -0,0 +1,159 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+ compatible = "GL-MT750", "ralink,mt7620a-soc";
+ model = "GL-MT750";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ palmbus@10000000 {
+ gpio0: gpio@600 {
+ status = "okay";
+ };
+
+ gpio1: gpio@638 {
+ status = "okay";
+ };
+
+ gpio2: gpio@660 {
+ status = "okay";
+ };
+
+ gpio3: gpio@688 {
+ status = "okay";
+ };
+
+ spi@b00 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25q128";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q128";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xf80000>;
+ };
+
+ partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x10000>;
+ };
+ };
+ };
+ };
+
+ sdhci@10130000 {
+ status = "okay";
+ };
+
+ ehci@101c0000 {
+ status = "okay";
+ };
+
+ ohci@101c1000 {
+ status = "okay";
+ };
+
+ ethernet@10100000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4000>;
+ ralink,port-map = "llllw";
+ };
+
+ wmac@10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ pcie@10140000 {
+ status = "okay";
+
+ pcie-bridge {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "wled","ephy","uartf";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ wan {
+ label = "gl-mt750:wan";
+ gpios = <&gpio2 0 1>;
+ };
+
+ lan {
+ label = "gl-mt750:lan";
+ gpios = <&gpio2 1 1>;
+ };
+
+ wlan {
+ label = "gl-mt750:wlan";
+ gpios = <&gpio3 0 1>;
+ };
+
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 13 1>;
+ linux,code = <0x198>;
+ };
+
+ BTN_0 {
+ label = "BTN_0";
+ gpios = <&gpio2 2 1>;
+ linux,code = <0x100>;
+ };
+
+ BTN_1 {
+ label = "BTN_1";
+ gpios = <&gpio2 3 1>;
+ linux,code = <0x101>;
+ };
+ };
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 4a2d60767f..bc42d148ad 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -995,6 +995,7 @@ Image/Build/Profile/WT3020=$(call BuildFirmware/PorayDualSize/$(1),$(1),wt3020,W
Image/Build/Profile/MIWIFI-MINI=$(call BuildFirmware/Default16M/$(1),$(1),miwifi-mini,MIWIFI-MINI)
Image/Build/Profile/GL-MT300A=$(call BuildFirmware/Default16M/$(1),$(1),gl-mt300a,GL-MT300A)
Image/Build/Profile/GL-MT300N=$(call BuildFirmware/Default16M/$(1),$(1),gl-mt300n,GL-MT300N)
+Image/Build/Profile/GL-MT750=$(call BuildFirmware/Default16M/$(1),$(1),gl-mt750,GL-MT750)
Image/Build/Profile/ZTE-Q7=$(call BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7)
Image/Build/Profile/YOUKU-YK1=$(call BuildFirmware/Default16M/$(1),$(1),youku-yk1,YOUKU-YK1)
Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
@@ -1040,6 +1041,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/MIWIFI-MINI,$(1))
$(call Image/Build/Profile/GL-MT300A,$(1))
$(call Image/Build/Profile/GL-MT300N,$(1))
+ $(call Image/Build/Profile/GL-MT750,$(1))
$(call Image/Build/Profile/ZTE-Q7,$(1))
$(call Image/Build/Profile/YOUKU-YK1,$(1))
$(call Image/Build/Profile/ZBT-WA05,$(1))
diff --git a/target/linux/ramips/mt7620/profiles/gli.mk b/target/linux/ramips/mt7620/profiles/gli.mk
index 6473ff07e5..ae220d5adf 100644
--- a/target/linux/ramips/mt7620/profiles/gli.mk
+++ b/target/linux/ramips/mt7620/profiles/gli.mk
@@ -25,3 +25,12 @@ define Profile/GL-MT300N/Description
endef
$(eval $(call Profile,GL-MT300N))
+define Profile/GL-MT750
+ NAME:=GL-MT750
+ PACKAGES:=kmod-usb-core kmod-usb-dwc2 kmod-usb2 kmod-usb-ohci kmod-mt76 kmod-mt7610e
+endef
+
+define Profile/GL-MT750/Description
+ Support for gl-mt750 Router
+endef
+$(eval $(call Profile,GL-MT750))