refresh patches to match upstream style

SVN-Revision: 11374

40 files changed, 285 insertions, 433 deletions

diff --git a/target/linux/adm5120/patches-2.6.25/001-adm5120.patch b/target/linux/adm5120/patches-2.6.25/001-adm5120.patch
index 8818fd852d..84d0a8d2fc 100644
--- a/target/linux/adm5120/patches-2.6.25/001-adm5120.patch
+++ b/target/linux/adm5120/patches-2.6.25/001-adm5120.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/mips/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/arch/mips/Kconfig
-+++ linux-2.6.25.4/arch/mips/Kconfig
-@@ -18,6 +18,20 @@ choice
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -18,6 +18,20 @@
  	prompt "System type"
  	default SGI_IP22
  
@@ -23,7 +21,7 @@ Index: linux-2.6.25.4/arch/mips/Kconfig
  config MACH_ALCHEMY
  	bool "Alchemy processor based machines"
  
-@@ -683,6 +697,7 @@ config WR_PPMC
+@@ -683,6 +697,7 @@
  
  endchoice
  
@@ -31,11 +29,9 @@ Index: linux-2.6.25.4/arch/mips/Kconfig
  source "arch/mips/au1000/Kconfig"
  source "arch/mips/basler/excite/Kconfig"
  source "arch/mips/jazz/Kconfig"
-Index: linux-2.6.25.4/arch/mips/Makefile
-===================================================================
---- linux-2.6.25.4.orig/arch/mips/Makefile
-+++ linux-2.6.25.4/arch/mips/Makefile
-@@ -174,6 +174,16 @@ cflags-$(CONFIG_MACH_JAZZ)	+= -Iinclude/
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -174,6 +174,16 @@
  load-$(CONFIG_MACH_JAZZ)	+= 0xffffffff80080000
  
  #
@@ -52,10 +48,8 @@ Index: linux-2.6.25.4/arch/mips/Makefile
  # Common Alchemy Au1x00 stuff
  #
  core-$(CONFIG_SOC_AU1X00)	+= arch/mips/au1000/common/
-Index: linux-2.6.25.4/include/asm-mips/bootinfo.h
-===================================================================
---- linux-2.6.25.4.orig/include/asm-mips/bootinfo.h
-+++ linux-2.6.25.4/include/asm-mips/bootinfo.h
+--- a/include/asm-mips/bootinfo.h
++++ b/include/asm-mips/bootinfo.h
 @@ -94,6 +94,58 @@
  #define MACH_MSP7120_FPGA       5	/* PMC-Sierra MSP7120 Emulation */
  #define MACH_MSP_OTHER        255	/* PMC-Sierra unknown board type */
diff --git a/target/linux/adm5120/patches-2.6.25/002-adm5120_flash.patch b/target/linux/adm5120/patches-2.6.25/002-adm5120_flash.patch
index dfe8eb72c8..143952321a 100644
--- a/target/linux/adm5120/patches-2.6.25/002-adm5120_flash.patch
+++ b/target/linux/adm5120/patches-2.6.25/002-adm5120_flash.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/drivers/mtd/maps/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/mtd/maps/Kconfig
-+++ linux-2.6.25.4/drivers/mtd/maps/Kconfig
-@@ -590,5 +590,9 @@ config MTD_PLATRAM
+--- a/drivers/mtd/maps/Kconfig
++++ b/drivers/mtd/maps/Kconfig
+@@ -590,5 +590,9 @@
  
  	  This selection automatically selects the map_ram driver.
  
@@ -12,11 +10,9 @@ Index: linux-2.6.25.4/drivers/mtd/maps/Kconfig
 +
  endmenu
  
-Index: linux-2.6.25.4/drivers/mtd/maps/Makefile
-===================================================================
---- linux-2.6.25.4.orig/drivers/mtd/maps/Makefile
-+++ linux-2.6.25.4/drivers/mtd/maps/Makefile
-@@ -44,6 +44,7 @@ obj-$(CONFIG_MTD_DBOX2)		+= dbox2-flash.
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -44,6 +44,7 @@
  obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
  obj-$(CONFIG_MTD_PCI)		+= pci.o
  obj-$(CONFIG_MTD_ALCHEMY)       += alchemy-flash.o
diff --git a/target/linux/adm5120/patches-2.6.25/003-adm5120_switch.patch b/target/linux/adm5120/patches-2.6.25/003-adm5120_switch.patch
index 36579c529d..20718119fa 100644
--- a/target/linux/adm5120/patches-2.6.25/003-adm5120_switch.patch
+++ b/target/linux/adm5120/patches-2.6.25/003-adm5120_switch.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/drivers/net/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/net/Kconfig
-+++ linux-2.6.25.4/drivers/net/Kconfig
-@@ -606,6 +606,10 @@ config MIPS_AU1X00_ENET
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -606,6 +606,10 @@
  	  If you have an Alchemy Semi AU1X00 based system
  	  say Y.  Otherwise, say N.
  
@@ -13,11 +11,9 @@ Index: linux-2.6.25.4/drivers/net/Kconfig
  config SGI_IOC3_ETH
  	bool "SGI IOC3 Ethernet"
  	depends on PCI && SGI_IP27
-Index: linux-2.6.25.4/drivers/net/Makefile
-===================================================================
---- linux-2.6.25.4.orig/drivers/net/Makefile
-+++ linux-2.6.25.4/drivers/net/Makefile
-@@ -187,6 +187,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -187,6 +187,7 @@
  # This is also a 82596 and should probably be merged
  obj-$(CONFIG_LP486E) += lp486e.o
  
diff --git a/target/linux/adm5120/patches-2.6.25/005-adm5120_usb.patch b/target/linux/adm5120/patches-2.6.25/005-adm5120_usb.patch
index 262ab779c7..4ab31dd980 100644
--- a/target/linux/adm5120/patches-2.6.25/005-adm5120_usb.patch
+++ b/target/linux/adm5120/patches-2.6.25/005-adm5120_usb.patch
@@ -1,19 +1,15 @@
-Index: linux-2.6.25.4/drivers/usb/host/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/usb/host/Kconfig
-+++ linux-2.6.25.4/drivers/usb/host/Kconfig
-@@ -260,3 +260,6 @@ config USB_R8A66597_HCD
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -260,3 +260,6 @@
  	  To compile this driver as a module, choose M here: the
  	  module will be called r8a66597-hcd.
  
 +config USB_ADM5120_HCD
 +	tristate "ADM5120 HCD support (EXPERIMENTAL)"
 +	depends on USB && MIPS_ADM5120 && EXPERIMENTAL
-Index: linux-2.6.25.4/drivers/usb/host/Makefile
-===================================================================
---- linux-2.6.25.4.orig/drivers/usb/host/Makefile
-+++ linux-2.6.25.4/drivers/usb/host/Makefile
-@@ -8,6 +8,7 @@ endif
+--- a/drivers/usb/host/Makefile
++++ b/drivers/usb/host/Makefile
+@@ -8,6 +8,7 @@
  
  obj-$(CONFIG_PCI)		+= pci-quirks.o
  
@@ -21,11 +17,9 @@ Index: linux-2.6.25.4/drivers/usb/host/Makefile
  obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
  obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
  obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
-Index: linux-2.6.25.4/drivers/usb/Makefile
-===================================================================
---- linux-2.6.25.4.orig/drivers/usb/Makefile
-+++ linux-2.6.25.4/drivers/usb/Makefile
-@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD)	+= host/
+--- a/drivers/usb/Makefile
++++ b/drivers/usb/Makefile
+@@ -16,6 +16,7 @@
  obj-$(CONFIG_USB_SL811_HCD)	+= host/
  obj-$(CONFIG_USB_U132_HCD)	+= host/
  obj-$(CONFIG_USB_R8A66597_HCD)	+= host/
diff --git a/target/linux/adm5120/patches-2.6.25/006-adm5120_leds.patch b/target/linux/adm5120/patches-2.6.25/006-adm5120_leds.patch
index 8d3789e8b0..ac108e512f 100644
--- a/target/linux/adm5120/patches-2.6.25/006-adm5120_leds.patch
+++ b/target/linux/adm5120/patches-2.6.25/006-adm5120_leds.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/drivers/leds/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/leds/Kconfig
-+++ linux-2.6.25.4/drivers/leds/Kconfig
-@@ -25,6 +25,21 @@ config LEDS_ATMEL_PWM
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -25,6 +25,21 @@
  	  This option enables support for LEDs driven using outputs
  	  of the dedicated PWM controller found on newer Atmel SOCs.
  
@@ -24,11 +22,9 @@ Index: linux-2.6.25.4/drivers/leds/Kconfig
  config LEDS_CORGI
  	tristate "LED Support for the Sharp SL-C7x0 series"
  	depends on LEDS_CLASS && PXA_SHARP_C7xx
-Index: linux-2.6.25.4/drivers/leds/Makefile
-===================================================================
---- linux-2.6.25.4.orig/drivers/leds/Makefile
-+++ linux-2.6.25.4/drivers/leds/Makefile
-@@ -5,6 +5,7 @@ obj-$(CONFIG_LEDS_CLASS)		+= led-class.o
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -5,6 +5,7 @@
  obj-$(CONFIG_LEDS_TRIGGERS)		+= led-triggers.o
  
  # LED Platform Drivers
diff --git a/target/linux/adm5120/patches-2.6.25/007-adm5120_pci.patch b/target/linux/adm5120/patches-2.6.25/007-adm5120_pci.patch
index d113fd3ce4..571c87675f 100644
--- a/target/linux/adm5120/patches-2.6.25/007-adm5120_pci.patch
+++ b/target/linux/adm5120/patches-2.6.25/007-adm5120_pci.patch
@@ -1,16 +1,12 @@
-Index: linux-2.6.25.4/arch/mips/pci/Makefile
-===================================================================
---- linux-2.6.25.4.orig/arch/mips/pci/Makefile
-+++ linux-2.6.25.4/arch/mips/pci/Makefile
-@@ -48,3 +48,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938)	+= fixup-
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -48,3 +48,4 @@
  obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
  obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
  obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
 +obj-$(CONFIG_PCI_ADM5120)	+= pci-adm5120.o
-Index: linux-2.6.25.4/include/linux/pci_ids.h
-===================================================================
---- linux-2.6.25.4.orig/include/linux/pci_ids.h
-+++ linux-2.6.25.4/include/linux/pci_ids.h
+--- a/include/linux/pci_ids.h
++++ b/include/linux/pci_ids.h
 @@ -1704,6 +1704,9 @@
  #define PCI_VENDOR_ID_ESDGMBH		0x12fe
  #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
diff --git a/target/linux/adm5120/patches-2.6.25/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-2.6.25/009-adm5120_leds_switch_trigger.patch
index 15f9582dd6..18280ed85e 100644
--- a/target/linux/adm5120/patches-2.6.25/009-adm5120_leds_switch_trigger.patch
+++ b/target/linux/adm5120/patches-2.6.25/009-adm5120_leds_switch_trigger.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/drivers/leds/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/leds/Kconfig
-+++ linux-2.6.25.4/drivers/leds/Kconfig
-@@ -213,4 +213,12 @@ config LEDS_TRIGGER_DEFAULT_ON
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -213,4 +213,12 @@
  	  This allows LEDs to be initialised in the ON state.
  	  If unsure, say Y.
  
@@ -15,11 +13,9 @@ Index: linux-2.6.25.4/drivers/leds/Kconfig
 +	  If unsure, say N.
 +
  endif # NEW_LEDS
-Index: linux-2.6.25.4/drivers/leds/Makefile
-===================================================================
---- linux-2.6.25.4.orig/drivers/leds/Makefile
-+++ linux-2.6.25.4/drivers/leds/Makefile
-@@ -30,3 +30,4 @@ obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK)	+= l
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -30,3 +30,4 @@
  obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+= ledtrig-heartbeat.o
  obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
  obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
diff --git a/target/linux/adm5120/patches-2.6.25/100-mtd_myloder_partition_parser.patch b/target/linux/adm5120/patches-2.6.25/100-mtd_myloder_partition_parser.patch
index 5b5d38b280..f5188936da 100644
--- a/target/linux/adm5120/patches-2.6.25/100-mtd_myloder_partition_parser.patch
+++ b/target/linux/adm5120/patches-2.6.25/100-mtd_myloder_partition_parser.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/drivers/mtd/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/mtd/Kconfig
-+++ linux-2.6.25.4/drivers/mtd/Kconfig
-@@ -168,6 +168,22 @@ config MTD_OF_PARTS
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -168,6 +168,22 @@
  	  the partition map from the children of the flash node,
  	  as described in Documentation/powerpc/booting-without-of.txt.
  
@@ -25,11 +23,9 @@ Index: linux-2.6.25.4/drivers/mtd/Kconfig
  comment "User Modules And Translation Layers"
  
  config MTD_CHAR
-Index: linux-2.6.25.4/drivers/mtd/Makefile
-===================================================================
---- linux-2.6.25.4.orig/drivers/mtd/Makefile
-+++ linux-2.6.25.4/drivers/mtd/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -12,6 +12,7 @@
  obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
  obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
  obj-$(CONFIG_MTD_OF_PARTS)      += ofpart.o
diff --git a/target/linux/adm5120/patches-2.6.25/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-2.6.25/101-cfi_fixup_macronix_bootloc.patch
index e1f0f6e21e..9179088934 100644
--- a/target/linux/adm5120/patches-2.6.25/101-cfi_fixup_macronix_bootloc.patch
+++ b/target/linux/adm5120/patches-2.6.25/101-cfi_fixup_macronix_bootloc.patch
@@ -1,7 +1,5 @@
-Index: linux-2.6.25.4/drivers/mtd/chips/cfi_cmdset_0002.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ linux-2.6.25.4/drivers/mtd/chips/cfi_cmdset_0002.c
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
 @@ -47,12 +47,19 @@
  #define MANUFACTURER_AMD	0x0001
  #define MANUFACTURER_ATMEL	0x001F
@@ -22,7 +20,7 @@ Index: linux-2.6.25.4/drivers/mtd/chips/cfi_cmdset_0002.c
  static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
  static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
  static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -221,6 +228,41 @@ static void fixup_use_atmel_lock(struct 
+@@ -221,6 +228,41 @@
  	mtd->flags |= MTD_POWERUP_LOCK;
  }
  
@@ -64,7 +62,7 @@ Index: linux-2.6.25.4/drivers/mtd/chips/cfi_cmdset_0002.c
  static struct cfi_fixup cfi_fixup_table[] = {
  	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
  #ifdef AMD_BOOTLOC_BUG
-@@ -252,6 +294,9 @@ static struct cfi_fixup fixup_table[] = 
+@@ -252,6 +294,9 @@
  	 */
  	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL },
  	{ CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL },
@@ -74,11 +72,9 @@ Index: linux-2.6.25.4/drivers/mtd/chips/cfi_cmdset_0002.c
  	{ 0, 0, NULL, NULL }
  };
  
-Index: linux-2.6.25.4/drivers/mtd/chips/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/mtd/chips/Kconfig
-+++ linux-2.6.25.4/drivers/mtd/chips/Kconfig
-@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
+--- a/drivers/mtd/chips/Kconfig
++++ b/drivers/mtd/chips/Kconfig
+@@ -196,6 +196,14 @@
  	  provides support for one of those command sets, used on chips
  	  including the AMD Am29LV320.
  
diff --git a/target/linux/adm5120/patches-2.6.25/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches-2.6.25/102-jedec_pmc_39lvxxx_chips.patch
index d3bd11e870..7f352f67ec 100644
--- a/target/linux/adm5120/patches-2.6.25/102-jedec_pmc_39lvxxx_chips.patch
+++ b/target/linux/adm5120/patches-2.6.25/102-jedec_pmc_39lvxxx_chips.patch
@@ -1,7 +1,5 @@
-Index: linux-2.6.25.4/drivers/mtd/chips/jedec_probe.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/mtd/chips/jedec_probe.c
-+++ linux-2.6.25.4/drivers/mtd/chips/jedec_probe.c
+--- a/drivers/mtd/chips/jedec_probe.c
++++ b/drivers/mtd/chips/jedec_probe.c
 @@ -121,6 +121,10 @@
  #define UPD29F064115	0x221C
  
@@ -13,7 +11,7 @@ Index: linux-2.6.25.4/drivers/mtd/chips/jedec_probe.c
  #define PM49FL002	0x006D
  #define PM49FL004	0x006E
  #define PM49FL008	0x006A
-@@ -1170,6 +1174,54 @@ static const struct amd_flash_info jedec
+@@ -1170,6 +1174,54 @@
  			ERASEINFO(0x02000,2),
  			ERASEINFO(0x04000,1),
  		}
diff --git a/target/linux/adm5120/patches-2.6.25/103-mtd_trxsplit.patch b/target/linux/adm5120/patches-2.6.25/103-mtd_trxsplit.patch
index 110286e49e..267293aa56 100644
--- a/target/linux/adm5120/patches-2.6.25/103-mtd_trxsplit.patch
+++ b/target/linux/adm5120/patches-2.6.25/103-mtd_trxsplit.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/drivers/mtd/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/mtd/Kconfig
-+++ linux-2.6.25.4/drivers/mtd/Kconfig
-@@ -57,6 +57,11 @@ config MTD_ROOTFS_SPLIT
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -57,6 +57,11 @@
  	depends on MTD_PARTITIONS
  	default y
  
@@ -14,11 +12,9 @@ Index: linux-2.6.25.4/drivers/mtd/Kconfig
  config MTD_REDBOOT_PARTS
  	tristate "RedBoot partition table parsing"
  	depends on MTD_PARTITIONS
-Index: linux-2.6.25.4/drivers/mtd/Makefile
-===================================================================
---- linux-2.6.25.4.orig/drivers/mtd/Makefile
-+++ linux-2.6.25.4/drivers/mtd/Makefile
-@@ -8,6 +8,7 @@ mtd-y				:= mtdcore.o mtdsuper.o
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -8,6 +8,7 @@
  mtd-$(CONFIG_MTD_PARTITIONS)	+= mtdpart.o
  
  obj-$(CONFIG_MTD_CONCAT)	+= mtdconcat.o
diff --git a/target/linux/adm5120/patches-2.6.25/120-rb153_cf_driver.patch b/target/linux/adm5120/patches-2.6.25/120-rb153_cf_driver.patch
index c9a00d8788..6f371e340b 100644
--- a/target/linux/adm5120/patches-2.6.25/120-rb153_cf_driver.patch
+++ b/target/linux/adm5120/patches-2.6.25/120-rb153_cf_driver.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/drivers/ata/Makefile
-===================================================================
---- linux-2.6.25.4.orig/drivers/ata/Makefile
-+++ linux-2.6.25.4/drivers/ata/Makefile
-@@ -71,6 +71,7 @@ obj-$(CONFIG_PATA_BF54X)	+= pata_bf54x.o
+--- a/drivers/ata/Makefile
++++ b/drivers/ata/Makefile
+@@ -71,6 +71,7 @@
  obj-$(CONFIG_PATA_PLATFORM)	+= pata_platform.o
  obj-$(CONFIG_PATA_OF_PLATFORM)	+= pata_of_platform.o
  obj-$(CONFIG_PATA_ICSIDE)	+= pata_icside.o
@@ -10,11 +8,9 @@ Index: linux-2.6.25.4/drivers/ata/Makefile
  # Should be last but two libata driver
  obj-$(CONFIG_PATA_ACPI)		+= pata_acpi.o
  # Should be last but one libata driver
-Index: linux-2.6.25.4/drivers/ata/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/ata/Kconfig
-+++ linux-2.6.25.4/drivers/ata/Kconfig
-@@ -679,4 +679,13 @@ config PATA_BF54X
+--- a/drivers/ata/Kconfig
++++ b/drivers/ata/Kconfig
+@@ -679,4 +679,13 @@
  
  	  If unsure, say N.
  
diff --git a/target/linux/adm5120/patches-2.6.25/140-cmdline_hack.patch b/target/linux/adm5120/patches-2.6.25/140-cmdline_hack.patch
index e3ff7f0c77..1ced3f62dd 100644
--- a/target/linux/adm5120/patches-2.6.25/140-cmdline_hack.patch
+++ b/target/linux/adm5120/patches-2.6.25/140-cmdline_hack.patch
@@ -1,7 +1,5 @@
-Index: linux-2.6.25.4/arch/mips/kernel/head.S
-===================================================================
---- linux-2.6.25.4.orig/arch/mips/kernel/head.S
-+++ linux-2.6.25.4/arch/mips/kernel/head.S
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
 @@ -126,7 +126,12 @@
  	/*
  	 * Reserved space for exception handlers.
diff --git a/target/linux/adm5120/patches-2.6.25/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-2.6.25/200-amba_pl010_hacks.patch
index 92b92d1ced..97b06acec8 100644
--- a/target/linux/adm5120/patches-2.6.25/200-amba_pl010_hacks.patch
+++ b/target/linux/adm5120/patches-2.6.25/200-amba_pl010_hacks.patch
@@ -1,7 +1,5 @@
-Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/serial/amba-pl010.c
-+++ linux-2.6.25.4/drivers/serial/amba-pl010.c
+--- a/drivers/serial/amba-pl010.c
++++ b/drivers/serial/amba-pl010.c
 @@ -52,11 +52,10 @@
  
  #include <asm/io.h>
@@ -16,7 +14,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
  
  #define AMBA_ISR_PASS_LIMIT	256
  
-@@ -82,7 +81,7 @@ static void pl010_stop_tx(struct uart_po
+@@ -82,7 +81,7 @@
  	struct uart_amba_port *uap = (struct uart_amba_port *)port;
  	unsigned int cr;
  
@@ -25,7 +23,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
  	cr &= ~UART010_CR_TIE;
  	writel(cr, uap->port.membase + UART010_CR);
  }
-@@ -92,7 +91,7 @@ static void pl010_start_tx(struct uart_p
+@@ -92,7 +91,7 @@
  	struct uart_amba_port *uap = (struct uart_amba_port *)port;
  	unsigned int cr;
  
@@ -34,7 +32,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
  	cr |= UART010_CR_TIE;
  	writel(cr, uap->port.membase + UART010_CR);
  }
-@@ -102,7 +101,7 @@ static void pl010_stop_rx(struct uart_po
+@@ -102,7 +101,7 @@
  	struct uart_amba_port *uap = (struct uart_amba_port *)port;
  	unsigned int cr;
  
@@ -43,7 +41,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
  	cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
  	writel(cr, uap->port.membase + UART010_CR);
  }
-@@ -112,7 +111,7 @@ static void pl010_enable_ms(struct uart_
+@@ -112,7 +111,7 @@
  	struct uart_amba_port *uap = (struct uart_amba_port *)port;
  	unsigned int cr;
  
@@ -52,7 +50,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
  	cr |= UART010_CR_MSIE;
  	writel(cr, uap->port.membase + UART010_CR);
  }
-@@ -122,9 +121,9 @@ static void pl010_rx_chars(struct uart_a
+@@ -122,9 +121,9 @@
  	struct tty_struct *tty = uap->port.info->tty;
  	unsigned int status, ch, flag, rsr, max_count = 256;
  
@@ -64,7 +62,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
  		flag = TTY_NORMAL;
  
  		uap->port.icount.rx++;
-@@ -133,7 +132,7 @@ static void pl010_rx_chars(struct uart_a
+@@ -133,7 +132,7 @@
  		 * Note that the error handling code is
  		 * out of the main execution path
  		 */
@@ -73,7 +71,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
  		if (unlikely(rsr & UART01x_RSR_ANY)) {
  			writel(0, uap->port.membase + UART01x_ECR);
  
-@@ -165,7 +164,7 @@ static void pl010_rx_chars(struct uart_a
+@@ -165,7 +164,7 @@
  		uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
  
  	ignore_char:
@@ -82,7 +80,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
  	}
  	spin_unlock(&uap->port.lock);
  	tty_flip_buffer_push(tty);
-@@ -210,7 +209,7 @@ static void pl010_modem_status(struct ua
+@@ -210,7 +209,7 @@
  
  	writel(0, uap->port.membase + UART010_ICR);
  
@@ -91,7 +89,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
  
  	delta = status ^ uap->old_status;
  	uap->old_status = status;
-@@ -238,7 +237,7 @@ static irqreturn_t pl010_int(int irq, vo
+@@ -238,7 +237,7 @@
  
  	spin_lock(&uap->port.lock);
  
@@ -100,7 +98,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
  	if (status) {
  		do {
  			if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
-@@ -251,7 +250,7 @@ static irqreturn_t pl010_int(int irq, vo
+@@ -251,7 +250,7 @@
  			if (pass_counter-- == 0)
  				break;
  
@@ -109,7 +107,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
  		} while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
  				   UART010_IIR_TIS));
  		handled = 1;
-@@ -265,7 +264,7 @@ static irqreturn_t pl010_int(int irq, vo
+@@ -265,7 +264,7 @@
  static unsigned int pl010_tx_empty(struct uart_port *port)
  {
  	struct uart_amba_port *uap = (struct uart_amba_port *)port;
@@ -118,7 +116,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
  	return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
  }
  
-@@ -275,7 +274,7 @@ static unsigned int pl010_get_mctrl(stru
+@@ -275,7 +274,7 @@
  	unsigned int result = 0;
  	unsigned int status;
  
@@ -127,7 +125,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
  	if (status & UART01x_FR_DCD)
  		result |= TIOCM_CAR;
  	if (status & UART01x_FR_DSR)
-@@ -301,7 +300,7 @@ static void pl010_break_ctl(struct uart_
+@@ -301,7 +300,7 @@
  	unsigned int lcr_h;
  
  	spin_lock_irqsave(&uap->port.lock, flags);
@@ -136,7 +134,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
  	if (break_state == -1)
  		lcr_h |= UART01x_LCRH_BRK;
  	else
-@@ -334,7 +333,7 @@ static int pl010_startup(struct uart_por
+@@ -334,7 +333,7 @@
  	/*
  	 * initialise the old status of the modem signals
  	 */
@@ -145,7 +143,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
  
  	/*
  	 * Finally, enable interrupts
-@@ -365,7 +364,7 @@ static void pl010_shutdown(struct uart_p
+@@ -365,7 +364,7 @@
  	writel(0, uap->port.membase + UART010_CR);
  
  	/* disable break condition and fifos */
@@ -154,7 +152,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
  		~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
  	       uap->port.membase + UART010_LCRH);
  
-@@ -387,7 +386,7 @@ pl010_set_termios(struct uart_port *port
+@@ -387,7 +386,7 @@
  	/*
  	 * Ask the core to calculate the divisor for us.
  	 */
@@ -163,7 +161,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
  	quot = uart_get_divisor(port, baud);
  
  	switch (termios->c_cflag & CSIZE) {
-@@ -450,7 +449,7 @@ pl010_set_termios(struct uart_port *port
+@@ -450,7 +449,7 @@
  		uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
  
  	/* first, disable everything */
@@ -172,7 +170,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
  
  	if (UART_ENABLE_MS(port, termios->c_cflag))
  		old_cr |= UART010_CR_MSIE;
-@@ -540,7 +539,7 @@ static struct uart_ops amba_pl010_pops =
+@@ -540,7 +539,7 @@
  	.verify_port	= pl010_verify_port,
  };
  
@@ -181,7 +179,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
  
  #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
  
-@@ -550,7 +549,7 @@ static void pl010_console_putchar(struct
+@@ -550,7 +549,7 @@
  	unsigned int status;
  
  	do {
@@ -190,7 +188,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
  		barrier();
  	} while (!UART_TX_READY(status));
  	writel(ch, uap->port.membase + UART01x_DR);
-@@ -567,7 +566,7 @@ pl010_console_write(struct console *co, 
+@@ -567,7 +566,7 @@
  	/*
  	 *	First save the CR then disable the interrupts
  	 */
@@ -199,7 +197,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
  	writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
  
  	uart_console_write(&uap->port, s, count, pl010_console_putchar);
-@@ -577,7 +576,7 @@ pl010_console_write(struct console *co, 
+@@ -577,7 +576,7 @@
  	 *	and restore the TCR
  	 */
  	do {
@@ -208,7 +206,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
  		barrier();
  	} while (status & UART01x_FR_BUSY);
  	writel(old_cr, uap->port.membase + UART010_CR);
-@@ -589,9 +588,9 @@ static void __init
+@@ -589,9 +588,9 @@
  pl010_console_get_options(struct uart_amba_port *uap, int *baud,
  			     int *parity, int *bits)
  {
@@ -220,7 +218,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
  
  		*parity = 'n';
  		if (lcr_h & UART01x_LCRH_PEN) {
-@@ -606,8 +605,8 @@ pl010_console_get_options(struct uart_am
+@@ -606,8 +605,8 @@
  		else
  			*bits = 8;
  
@@ -231,7 +229,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
  		*baud = uap->port.uartclk / (16 * (quot + 1));
  	}
  }
-@@ -625,7 +624,7 @@ static int __init pl010_console_setup(st
+@@ -625,7 +624,7 @@
  	 * if so, search for the first available port that does have
  	 * console support.
  	 */
@@ -240,7 +238,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
  		co->index = 0;
  	uap = amba_ports[co->index];
  	if (!uap)
-@@ -643,7 +642,7 @@ static int __init pl010_console_setup(st
+@@ -643,7 +642,7 @@
  
  static struct uart_driver amba_reg;
  static struct console amba_console = {
@@ -249,7 +247,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
  	.write		= pl010_console_write,
  	.device		= uart_console_device,
  	.setup		= pl010_console_setup,
-@@ -659,11 +658,11 @@ static struct console amba_console = {
+@@ -659,11 +658,11 @@
  
  static struct uart_driver amba_reg = {
  	.owner			= THIS_MODULE,
@@ -264,11 +262,9 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
  	.cons			= AMBA_CONSOLE,
  };
  
-Index: linux-2.6.25.4/drivers/serial/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/serial/Kconfig
-+++ linux-2.6.25.4/drivers/serial/Kconfig
-@@ -287,10 +287,25 @@ config SERIAL_AMBA_PL010
+--- a/drivers/serial/Kconfig
++++ b/drivers/serial/Kconfig
+@@ -287,10 +287,25 @@
  	help
  	  This selects the ARM(R) AMBA(R) PrimeCell PL010 UART.  If you have
  	  an Integrator/AP or Integrator/PP2 platform, or if you have a
diff --git a/target/linux/adm5120/patches-2.6.25/201-amba_bus_hacks.patch b/target/linux/adm5120/patches-2.6.25/201-amba_bus_hacks.patch
index b0881fbe7c..299f216523 100644
--- a/target/linux/adm5120/patches-2.6.25/201-amba_bus_hacks.patch
+++ b/target/linux/adm5120/patches-2.6.25/201-amba_bus_hacks.patch
@@ -1,7 +1,5 @@
-Index: linux-2.6.25.4/drivers/amba/bus.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/amba/bus.c
-+++ linux-2.6.25.4/drivers/amba/bus.c
+--- a/drivers/amba/bus.c
++++ b/drivers/amba/bus.c
 @@ -17,6 +17,10 @@
  #include <asm/io.h>
  #include <asm/sizes.h>
diff --git a/target/linux/adm5120/patches-2.6.25/202-pci_disable_common_quirks.patch b/target/linux/adm5120/patches-2.6.25/202-pci_disable_common_quirks.patch
index 59db560313..25149885a5 100644
--- a/target/linux/adm5120/patches-2.6.25/202-pci_disable_common_quirks.patch
+++ b/target/linux/adm5120/patches-2.6.25/202-pci_disable_common_quirks.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/drivers/pci/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/pci/Kconfig
-+++ linux-2.6.25.4/drivers/pci/Kconfig
-@@ -42,6 +42,12 @@ config PCI_DEBUG
+--- a/drivers/pci/Kconfig
++++ b/drivers/pci/Kconfig
+@@ -42,6 +42,12 @@
  
  	  When in doubt, say N.
  
@@ -15,10 +13,8 @@ Index: linux-2.6.25.4/drivers/pci/Kconfig
  config HT_IRQ
  	bool "Interrupts on hypertransport devices"
  	default y
-Index: linux-2.6.25.4/drivers/pci/quirks.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/pci/quirks.c
-+++ linux-2.6.25.4/drivers/pci/quirks.c
+--- a/drivers/pci/quirks.c
++++ b/drivers/pci/quirks.c
 @@ -24,6 +24,7 @@
  #include <linux/kallsyms.h>
  #include "pci.h"
@@ -27,7 +23,7 @@ Index: linux-2.6.25.4/drivers/pci/quirks.c
  /* The Mellanox Tavor device gives false positive parity errors
   * Mark this device with a broken_parity_status, to allow
   * PCI scanning code to "skip" this now blacklisted device.
-@@ -1495,6 +1496,7 @@ static void __devinit fixup_rev1_53c810(
+@@ -1495,6 +1496,7 @@
  	}
  }
  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
@@ -35,7 +31,7 @@ Index: linux-2.6.25.4/drivers/pci/quirks.c
  
  static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end)
  {
-@@ -1562,6 +1564,7 @@ void pci_fixup_device(enum pci_fixup_pas
+@@ -1562,6 +1564,7 @@
  }
  EXPORT_SYMBOL(pci_fixup_device);
  
@@ -43,7 +39,7 @@ Index: linux-2.6.25.4/drivers/pci/quirks.c
  /* Enable 1k I/O space granularity on the Intel P64H2 */
  static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
  {
-@@ -1875,3 +1878,4 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AT
+@@ -1875,3 +1878,4 @@
  			quirk_msi_intx_disable_bug);
  
  #endif /* CONFIG_PCI_MSI */
diff --git a/target/linux/adm5120/patches-2.6.25/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches-2.6.25/203-gpio_leds_brightness.patch
index b5e45c87f6..06394da295 100644
--- a/target/linux/adm5120/patches-2.6.25/203-gpio_leds_brightness.patch
+++ b/target/linux/adm5120/patches-2.6.25/203-gpio_leds_brightness.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/drivers/leds/leds-gpio.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/leds/leds-gpio.c
-+++ linux-2.6.25.4/drivers/leds/leds-gpio.c
-@@ -41,13 +41,17 @@ static void gpio_led_set(struct led_clas
+--- a/drivers/leds/leds-gpio.c
++++ b/drivers/leds/leds-gpio.c
+@@ -41,13 +41,17 @@
  		container_of(led_cdev, struct gpio_led_data, cdev);
  	int level;
  
diff --git a/target/linux/adm5120/patches-2.6.25/310-adm5120_wdt.patch b/target/linux/adm5120/patches-2.6.25/310-adm5120_wdt.patch
index 4b4c54a70b..78eb62862d 100644
--- a/target/linux/adm5120/patches-2.6.25/310-adm5120_wdt.patch
+++ b/target/linux/adm5120/patches-2.6.25/310-adm5120_wdt.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/drivers/watchdog/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/watchdog/Kconfig
-+++ linux-2.6.25.4/drivers/watchdog/Kconfig
-@@ -619,6 +619,18 @@ config SBC_EPX_C3_WATCHDOG
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -619,6 +619,18 @@
  
  # MIPS Architecture
  
@@ -21,11 +19,9 @@ Index: linux-2.6.25.4/drivers/watchdog/Kconfig
  config INDYDOG
  	tristate "Indy/I2 Hardware Watchdog"
  	depends on SGI_HAS_INDYDOG
-Index: linux-2.6.25.4/drivers/watchdog/Makefile
-===================================================================
---- linux-2.6.25.4.orig/drivers/watchdog/Makefile
-+++ linux-2.6.25.4/drivers/watchdog/Makefile
-@@ -90,6 +90,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -90,6 +90,7 @@
  # M68KNOMMU Architecture
  
  # MIPS Architecture
diff --git a/target/linux/adm5120/patches-2.6.25/900-usb_bump_version_number.patch b/target/linux/adm5120/patches-2.6.25/900-usb_bump_version_number.patch
index c9a59be4ca..d15c89c00b 100644
--- a/target/linux/adm5120/patches-2.6.25/900-usb_bump_version_number.patch
+++ b/target/linux/adm5120/patches-2.6.25/900-usb_bump_version_number.patch
@@ -1,7 +1,5 @@
-Index: linux-2.6.25.4/drivers/usb/host/adm5120-hcd.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/usb/host/adm5120-hcd.c
-+++ linux-2.6.25.4/drivers/usb/host/adm5120-hcd.c
+--- a/drivers/usb/host/adm5120-hcd.c
++++ b/drivers/usb/host/adm5120-hcd.c
 @@ -45,7 +45,7 @@
  #include "../core/hcd.h"
  #include "../core/hub.h"
diff --git a/target/linux/adm5120/patches-2.6.25/901-usb_convert_from_class_device.patch b/target/linux/adm5120/patches-2.6.25/901-usb_convert_from_class_device.patch
index 5f4d087e2f..da868ccbab 100644
--- a/target/linux/adm5120/patches-2.6.25/901-usb_convert_from_class_device.patch
+++ b/target/linux/adm5120/patches-2.6.25/901-usb_convert_from_class_device.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/usb/host/adm5120-dbg.c
-+++ linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c
-@@ -456,7 +456,7 @@ show_list(struct admhcd *ahcd, char *buf
+--- a/drivers/usb/host/adm5120-dbg.c
++++ b/drivers/usb/host/adm5120-dbg.c
+@@ -456,7 +456,7 @@
  }
  
  static ssize_t
@@ -11,7 +9,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c
  {
  	struct usb_bus		*bus;
  	struct usb_hcd		*hcd;
-@@ -464,7 +464,7 @@ show_async(struct class_device *class_de
+@@ -464,7 +464,7 @@
  	size_t			temp;
  	unsigned long		flags;
  
@@ -20,7 +18,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c
  	hcd = bus_to_hcd(bus);
  	ahcd = hcd_to_admhcd(hcd);
  
-@@ -475,13 +475,13 @@ show_async(struct class_device *class_de
+@@ -475,13 +475,13 @@
  
  	return temp;
  }
@@ -36,7 +34,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c
  {
  	struct usb_bus		*bus;
  	struct usb_hcd		*hcd;
-@@ -496,7 +496,7 @@ show_periodic(struct class_device *class
+@@ -496,7 +496,7 @@
  		return 0;
  	seen_count = 0;
  
@@ -45,7 +43,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c
  	hcd = bus_to_hcd(bus);
  	ahcd = hcd_to_admhcd(hcd);
  	next = buf;
-@@ -574,13 +574,13 @@ show_periodic(struct class_device *class
+@@ -574,13 +574,13 @@
  
  	return PAGE_SIZE - size;
  }
@@ -61,7 +59,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c
  {
  	struct usb_bus		*bus;
  	struct usb_hcd		*hcd;
-@@ -591,7 +591,7 @@ show_registers(struct class_device *clas
+@@ -591,7 +591,7 @@
  	char			*next;
  	u32			rdata;
  
@@ -70,7 +68,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c
  	hcd = bus_to_hcd(bus);
  	ahcd = hcd_to_admhcd(hcd);
  	regs = ahcd->regs;
-@@ -656,27 +656,27 @@ done:
+@@ -656,27 +656,27 @@
  	spin_unlock_irqrestore(&ahcd->lock, flags);
  	return PAGE_SIZE - size;
  }
diff --git a/target/linux/adm5120/patches-2.6.25/902-usb_use_debugfs_instead_of_sysfs.patch b/target/linux/adm5120/patches-2.6.25/902-usb_use_debugfs_instead_of_sysfs.patch
index 88688ea6eb..5b513c0f66 100644
--- a/target/linux/adm5120/patches-2.6.25/902-usb_use_debugfs_instead_of_sysfs.patch
+++ b/target/linux/adm5120/patches-2.6.25/902-usb_use_debugfs_instead_of_sysfs.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/drivers/usb/host/adm5120.h
-===================================================================
---- linux-2.6.25.4.orig/drivers/usb/host/adm5120.h
-+++ linux-2.6.25.4/drivers/usb/host/adm5120.h
-@@ -431,6 +431,13 @@ struct admhcd {
+--- a/drivers/usb/host/adm5120.h
++++ b/drivers/usb/host/adm5120.h
+@@ -431,6 +431,13 @@
  #define	OHCI_QUIRK_BE_MMIO	0x10			/* BE registers */
  #define	OHCI_QUIRK_ZFMICRO	0x20			/* Compaq ZFMicro chipset*/
  	// there are also chip quirks/bugs in init logic
@@ -16,10 +14,8 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120.h
  };
  
  /* convert between an hcd pointer and the corresponding ahcd_hcd */
-Index: linux-2.6.25.4/drivers/usb/host/adm5120-hcd.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/usb/host/adm5120-hcd.c
-+++ linux-2.6.25.4/drivers/usb/host/adm5120-hcd.c
+--- a/drivers/usb/host/adm5120-hcd.c
++++ b/drivers/usb/host/adm5120-hcd.c
 @@ -35,6 +35,7 @@
  #include <linux/dma-mapping.h>
  #include <linux/dmapool.h>
@@ -28,7 +24,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-hcd.c
  
  #include <asm/io.h>
  #include <asm/irq.h>
-@@ -799,6 +800,14 @@ static int __init admhc_hcd_mod_init(voi
+@@ -804,6 +805,14 @@
  	pr_info("%s: block sizes: ed %Zd td %Zd\n", hcd_name,
  		sizeof (struct ed), sizeof (struct td));
  
@@ -43,7 +39,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-hcd.c
  #ifdef PLATFORM_DRIVER
  	ret = platform_driver_register(&PLATFORM_DRIVER);
  	if (ret < 0)
-@@ -811,6 +820,12 @@ static int __init admhc_hcd_mod_init(voi
+@@ -816,6 +825,12 @@
  	platform_driver_unregister(&PLATFORM_DRIVER);
  error_platform:
  #endif
@@ -56,7 +52,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-hcd.c
  	return ret;
  }
  module_init(admhc_hcd_mod_init);
-@@ -818,6 +833,9 @@ module_init(admhc_hcd_mod_init);
+@@ -823,6 +838,9 @@
  static void __exit admhc_hcd_mod_exit(void)
  {
  	platform_driver_unregister(&PLATFORM_DRIVER);
@@ -66,11 +62,9 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-hcd.c
  }
  module_exit(admhc_hcd_mod_exit);
  
-Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/usb/host/adm5120-dbg.c
-+++ linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c
-@@ -390,6 +390,42 @@ static inline void remove_debug_files(st
+--- a/drivers/usb/host/adm5120-dbg.c
++++ b/drivers/usb/host/adm5120-dbg.c
+@@ -390,6 +390,42 @@
  
  #else
  
@@ -113,7 +107,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c
  static ssize_t
  show_list(struct admhcd *ahcd, char *buf, size_t count, struct ed *ed)
  {
-@@ -455,8 +491,7 @@ show_list(struct admhcd *ahcd, char *buf
+@@ -455,8 +491,7 @@
  	return count - size;
  }
  
@@ -123,7 +117,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c
  {
  	struct usb_bus		*bus;
  	struct usb_hcd		*hcd;
-@@ -464,24 +499,22 @@ show_async(struct device *dev, struct de
+@@ -464,24 +499,22 @@
  	size_t			temp;
  	unsigned long		flags;
  
@@ -151,7 +145,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c
  {
  	struct usb_bus		*bus;
  	struct usb_hcd		*hcd;
-@@ -496,10 +529,10 @@ show_periodic(struct device *dev, struct
+@@ -496,10 +529,10 @@
  		return 0;
  	seen_count = 0;
  
@@ -164,7 +158,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c
  	size = PAGE_SIZE;
  
  	temp = scnprintf(next, size, "size = %d\n", NUM_INTS);
-@@ -574,13 +607,11 @@ show_periodic(struct device *dev, struct
+@@ -574,13 +607,11 @@
  
  	return PAGE_SIZE - size;
  }
@@ -179,7 +173,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c
  {
  	struct usb_bus		*bus;
  	struct usb_hcd		*hcd;
-@@ -591,11 +622,11 @@ show_registers(struct device *dev, struc
+@@ -591,11 +622,11 @@
  	char			*next;
  	u32			rdata;
  
@@ -193,7 +187,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c
  	size = PAGE_SIZE;
  
  	spin_lock_irqsave(&ahcd->lock, flags);
-@@ -656,27 +687,154 @@ done:
+@@ -656,27 +687,154 @@
  	spin_unlock_irqrestore(&ahcd->lock, flags);
  	return PAGE_SIZE - size;
  }
diff --git a/target/linux/adm5120/patches-2.6.25/910-pata_rb153_cf_fix_compiler_warning.patch b/target/linux/adm5120/patches-2.6.25/910-pata_rb153_cf_fix_compiler_warning.patch
index b99ddc8e78..27ae067d90 100644
--- a/target/linux/adm5120/patches-2.6.25/910-pata_rb153_cf_fix_compiler_warning.patch
+++ b/target/linux/adm5120/patches-2.6.25/910-pata_rb153_cf_fix_compiler_warning.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/drivers/ata/pata_rb153_cf.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/ata/pata_rb153_cf.c
-+++ linux-2.6.25.4/drivers/ata/pata_rb153_cf.c
-@@ -68,20 +68,23 @@ static void rb153_pata_exec_command(stru
+--- a/drivers/ata/pata_rb153_cf.c
++++ b/drivers/ata/pata_rb153_cf.c
+@@ -68,20 +68,23 @@
  	rb153_pata_finish_io(ap);
  }
  
diff --git a/target/linux/adm5120/patches/001-adm5120.patch b/target/linux/adm5120/patches/001-adm5120.patch
index 9280271800..26c0265049 100644
--- a/target/linux/adm5120/patches/001-adm5120.patch
+++ b/target/linux/adm5120/patches/001-adm5120.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.24.7/arch/mips/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/arch/mips/Kconfig
-+++ linux-2.6.24.7/arch/mips/Kconfig
-@@ -16,6 +16,20 @@ choice
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -16,6 +16,20 @@
  	prompt "System type"
  	default SGI_IP22
  
@@ -23,7 +21,7 @@ Index: linux-2.6.24.7/arch/mips/Kconfig
  config MACH_ALCHEMY
  	bool "Alchemy processor based machines"
  
-@@ -689,6 +703,7 @@ config WR_PPMC
+@@ -689,6 +703,7 @@
  
  endchoice
  
@@ -31,11 +29,9 @@ Index: linux-2.6.24.7/arch/mips/Kconfig
  source "arch/mips/au1000/Kconfig"
  source "arch/mips/jazz/Kconfig"
  source "arch/mips/lasat/Kconfig"
-Index: linux-2.6.24.7/arch/mips/Makefile
-===================================================================
---- linux-2.6.24.7.orig/arch/mips/Makefile
-+++ linux-2.6.24.7/arch/mips/Makefile
-@@ -166,6 +166,16 @@ cflags-$(CONFIG_MACH_JAZZ)	+= -Iinclude/
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -166,6 +166,16 @@
  load-$(CONFIG_MACH_JAZZ)	+= 0xffffffff80080000
  
  #
@@ -52,10 +48,8 @@ Index: linux-2.6.24.7/arch/mips/Makefile
  # Common Alchemy Au1x00 stuff
  #
  core-$(CONFIG_SOC_AU1X00)	+= arch/mips/au1000/common/
-Index: linux-2.6.24.7/include/asm-mips/bootinfo.h
-===================================================================
---- linux-2.6.24.7.orig/include/asm-mips/bootinfo.h
-+++ linux-2.6.24.7/include/asm-mips/bootinfo.h
+--- a/include/asm-mips/bootinfo.h
++++ b/include/asm-mips/bootinfo.h
 @@ -198,6 +198,58 @@
  #define MACH_GROUP_BRCM		23	/* Broadcom			*/
  #define  MACH_BCM47XX		1	/* Broadcom BCM47XX		*/
diff --git a/target/linux/adm5120/patches/002-adm5120_flash.patch b/target/linux/adm5120/patches/002-adm5120_flash.patch
index a81ccde50c..d2326fa959 100644
--- a/target/linux/adm5120/patches/002-adm5120_flash.patch
+++ b/target/linux/adm5120/patches/002-adm5120_flash.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.24.7/drivers/mtd/maps/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/mtd/maps/Kconfig
-+++ linux-2.6.24.7/drivers/mtd/maps/Kconfig
-@@ -597,5 +597,9 @@ config MTD_PLATRAM
+--- a/drivers/mtd/maps/Kconfig
++++ b/drivers/mtd/maps/Kconfig
+@@ -597,5 +597,9 @@
  
  	  This selection automatically selects the map_ram driver.
  
@@ -12,11 +10,9 @@ Index: linux-2.6.24.7/drivers/mtd/maps/Kconfig
 +
  endmenu
  
-Index: linux-2.6.24.7/drivers/mtd/maps/Makefile
-===================================================================
---- linux-2.6.24.7.orig/drivers/mtd/maps/Makefile
-+++ linux-2.6.24.7/drivers/mtd/maps/Makefile
-@@ -45,6 +45,7 @@ obj-$(CONFIG_MTD_DBOX2)		+= dbox2-flash.
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -45,6 +45,7 @@
  obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
  obj-$(CONFIG_MTD_PCI)		+= pci.o
  obj-$(CONFIG_MTD_ALCHEMY)       += alchemy-flash.o
diff --git a/target/linux/adm5120/patches/003-adm5120_switch.patch b/target/linux/adm5120/patches/003-adm5120_switch.patch
index 7694eb0b31..1d2e428dde 100644
--- a/target/linux/adm5120/patches/003-adm5120_switch.patch
+++ b/target/linux/adm5120/patches/003-adm5120_switch.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.24.7/drivers/net/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/net/Kconfig
-+++ linux-2.6.24.7/drivers/net/Kconfig
-@@ -601,6 +601,10 @@ config MIPS_AU1X00_ENET
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -601,6 +601,10 @@
  	  If you have an Alchemy Semi AU1X00 based system
  	  say Y.  Otherwise, say N.
  
@@ -13,11 +11,9 @@ Index: linux-2.6.24.7/drivers/net/Kconfig
  config SGI_IOC3_ETH
  	bool "SGI IOC3 Ethernet"
  	depends on PCI && SGI_IP27
-Index: linux-2.6.24.7/drivers/net/Makefile
-===================================================================
---- linux-2.6.24.7.orig/drivers/net/Makefile
-+++ linux-2.6.24.7/drivers/net/Makefile
-@@ -183,6 +183,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -183,6 +183,7 @@
  # This is also a 82596 and should probably be merged
  obj-$(CONFIG_LP486E) += lp486e.o
  
diff --git a/target/linux/adm5120/patches/005-adm5120_usb.patch b/target/linux/adm5120/patches/005-adm5120_usb.patch
index ddb4a3df8f..ef9a4fd9d3 100644
--- a/target/linux/adm5120/patches/005-adm5120_usb.patch
+++ b/target/linux/adm5120/patches/005-adm5120_usb.patch
@@ -1,19 +1,15 @@
-Index: linux-2.6.24.7/drivers/usb/host/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/usb/host/Kconfig
-+++ linux-2.6.24.7/drivers/usb/host/Kconfig
-@@ -261,3 +261,6 @@ config USB_R8A66597_HCD
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -261,3 +261,6 @@
  	  To compile this driver as a module, choose M here: the
  	  module will be called r8a66597-hcd.
  
 +config USB_ADM5120_HCD
 +	tristate "ADM5120 HCD support (EXPERIMENTAL)"
 +	depends on USB && MIPS_ADM5120 && EXPERIMENTAL
-Index: linux-2.6.24.7/drivers/usb/host/Makefile
-===================================================================
---- linux-2.6.24.7.orig/drivers/usb/host/Makefile
-+++ linux-2.6.24.7/drivers/usb/host/Makefile
-@@ -8,6 +8,7 @@ endif
+--- a/drivers/usb/host/Makefile
++++ b/drivers/usb/host/Makefile
+@@ -8,6 +8,7 @@
  
  obj-$(CONFIG_PCI)		+= pci-quirks.o
  
@@ -21,11 +17,9 @@ Index: linux-2.6.24.7/drivers/usb/host/Makefile
  obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
  obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
  obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
-Index: linux-2.6.24.7/drivers/usb/Makefile
-===================================================================
---- linux-2.6.24.7.orig/drivers/usb/Makefile
-+++ linux-2.6.24.7/drivers/usb/Makefile
-@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD)	+= host/
+--- a/drivers/usb/Makefile
++++ b/drivers/usb/Makefile
+@@ -16,6 +16,7 @@
  obj-$(CONFIG_USB_SL811_HCD)	+= host/
  obj-$(CONFIG_USB_U132_HCD)	+= host/
  obj-$(CONFIG_USB_R8A66597_HCD)	+= host/
diff --git a/target/linux/adm5120/patches/006-adm5120_leds.patch b/target/linux/adm5120/patches/006-adm5120_leds.patch
index fc4943401e..6c8886da5c 100644
--- a/target/linux/adm5120/patches/006-adm5120_leds.patch
+++ b/target/linux/adm5120/patches/006-adm5120_leds.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.24.7/drivers/leds/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/leds/Kconfig
-+++ linux-2.6.24.7/drivers/leds/Kconfig
-@@ -18,6 +18,21 @@ config LEDS_CLASS
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -18,6 +18,21 @@
  
  comment "LED drivers"
  
@@ -24,11 +22,9 @@ Index: linux-2.6.24.7/drivers/leds/Kconfig
  config LEDS_CORGI
  	tristate "LED Support for the Sharp SL-C7x0 series"
  	depends on LEDS_CLASS && PXA_SHARP_C7xx
-Index: linux-2.6.24.7/drivers/leds/Makefile
-===================================================================
---- linux-2.6.24.7.orig/drivers/leds/Makefile
-+++ linux-2.6.24.7/drivers/leds/Makefile
-@@ -5,6 +5,7 @@ obj-$(CONFIG_LEDS_CLASS)		+= led-class.o
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -5,6 +5,7 @@
  obj-$(CONFIG_LEDS_TRIGGERS)		+= led-triggers.o
  
  # LED Platform Drivers
diff --git a/target/linux/adm5120/patches/007-adm5120_pci.patch b/target/linux/adm5120/patches/007-adm5120_pci.patch
index 2d6903cd3e..540b7d90ec 100644
--- a/target/linux/adm5120/patches/007-adm5120_pci.patch
+++ b/target/linux/adm5120/patches/007-adm5120_pci.patch
@@ -1,16 +1,12 @@
-Index: linux-2.6.24.7/arch/mips/pci/Makefile
-===================================================================
---- linux-2.6.24.7.orig/arch/mips/pci/Makefile
-+++ linux-2.6.24.7/arch/mips/pci/Makefile
-@@ -48,3 +48,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938)	+= fixup-
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -48,3 +48,4 @@
  obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
  obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
  obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
 +obj-$(CONFIG_PCI_ADM5120)	+= pci-adm5120.o
-Index: linux-2.6.24.7/include/linux/pci_ids.h
-===================================================================
---- linux-2.6.24.7.orig/include/linux/pci_ids.h
-+++ linux-2.6.24.7/include/linux/pci_ids.h
+--- a/include/linux/pci_ids.h
++++ b/include/linux/pci_ids.h
 @@ -1703,6 +1703,9 @@
  #define PCI_VENDOR_ID_ESDGMBH		0x12fe
  #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
diff --git a/target/linux/adm5120/patches/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches/009-adm5120_leds_switch_trigger.patch
index cf10f7963c..bb04038753 100644
--- a/target/linux/adm5120/patches/009-adm5120_leds_switch_trigger.patch
+++ b/target/linux/adm5120/patches/009-adm5120_leds_switch_trigger.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.24.7/drivers/leds/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/leds/Kconfig
-+++ linux-2.6.24.7/drivers/leds/Kconfig
-@@ -178,4 +178,12 @@ config LEDS_TRIGGER_DEFAULT_ON
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -178,4 +178,12 @@
  	  This allows LEDs to be initialised in the ON state.
  	  If unsure, say Y.
  
@@ -15,11 +13,9 @@ Index: linux-2.6.24.7/drivers/leds/Kconfig
 +	  If unsure, say N.
 +
  endif # NEW_LEDS
-Index: linux-2.6.24.7/drivers/leds/Makefile
-===================================================================
---- linux-2.6.24.7.orig/drivers/leds/Makefile
-+++ linux-2.6.24.7/drivers/leds/Makefile
-@@ -28,3 +28,4 @@ obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK)	+= l
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -28,3 +28,4 @@
  obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+= ledtrig-heartbeat.o
  obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
  obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
diff --git a/target/linux/adm5120/patches/100-mtd_myloder_partition_parser.patch b/target/linux/adm5120/patches/100-mtd_myloder_partition_parser.patch
index 47166ed3cb..fe9c45b092 100644
--- a/target/linux/adm5120/patches/100-mtd_myloder_partition_parser.patch
+++ b/target/linux/adm5120/patches/100-mtd_myloder_partition_parser.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.24.7/drivers/mtd/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/mtd/Kconfig
-+++ linux-2.6.24.7/drivers/mtd/Kconfig
-@@ -160,6 +160,22 @@ config MTD_AFS_PARTS
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -160,6 +160,22 @@
  	  for your particular device. It won't happen automatically. The
  	  'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
  
@@ -25,11 +23,9 @@ Index: linux-2.6.24.7/drivers/mtd/Kconfig
  comment "User Modules And Translation Layers"
  
  config MTD_CHAR
-Index: linux-2.6.24.7/drivers/mtd/Makefile
-===================================================================
---- linux-2.6.24.7.orig/drivers/mtd/Makefile
-+++ linux-2.6.24.7/drivers/mtd/Makefile
-@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_CONCAT)	+= mtdconcat.o
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -11,6 +11,7 @@
  obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
  obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
  obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
diff --git a/target/linux/adm5120/patches/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches/101-cfi_fixup_macronix_bootloc.patch
index 859b5ca01a..9acb626bb5 100644
--- a/target/linux/adm5120/patches/101-cfi_fixup_macronix_bootloc.patch
+++ b/target/linux/adm5120/patches/101-cfi_fixup_macronix_bootloc.patch
@@ -1,7 +1,5 @@
-Index: linux-2.6.24.7/drivers/mtd/chips/cfi_cmdset_0002.c
-===================================================================
---- linux-2.6.24.7.orig/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ linux-2.6.24.7/drivers/mtd/chips/cfi_cmdset_0002.c
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
 @@ -47,12 +47,19 @@
  #define MANUFACTURER_AMD	0x0001
  #define MANUFACTURER_ATMEL	0x001F
@@ -22,7 +20,7 @@ Index: linux-2.6.24.7/drivers/mtd/chips/cfi_cmdset_0002.c
  static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
  static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
  static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -217,6 +224,41 @@ static void fixup_use_atmel_lock(struct 
+@@ -217,6 +224,41 @@
  	mtd->flags |= MTD_STUPID_LOCK;
  }
  
@@ -64,7 +62,7 @@ Index: linux-2.6.24.7/drivers/mtd/chips/cfi_cmdset_0002.c
  static struct cfi_fixup cfi_fixup_table[] = {
  #ifdef AMD_BOOTLOC_BUG
  	{ CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
-@@ -231,6 +273,9 @@ static struct cfi_fixup cfi_fixup_table[
+@@ -231,6 +273,9 @@
  	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
  #endif
  	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
@@ -74,11 +72,9 @@ Index: linux-2.6.24.7/drivers/mtd/chips/cfi_cmdset_0002.c
  	{ 0, 0, NULL, NULL }
  };
  static struct cfi_fixup jedec_fixup_table[] = {
-Index: linux-2.6.24.7/drivers/mtd/chips/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/mtd/chips/Kconfig
-+++ linux-2.6.24.7/drivers/mtd/chips/Kconfig
-@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
+--- a/drivers/mtd/chips/Kconfig
++++ b/drivers/mtd/chips/Kconfig
+@@ -196,6 +196,14 @@
  	  provides support for one of those command sets, used on chips
  	  including the AMD Am29LV320.
  
diff --git a/target/linux/adm5120/patches/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches/102-jedec_pmc_39lvxxx_chips.patch
index 14c675cd91..0c512ea6a4 100644
--- a/target/linux/adm5120/patches/102-jedec_pmc_39lvxxx_chips.patch
+++ b/target/linux/adm5120/patches/102-jedec_pmc_39lvxxx_chips.patch
@@ -1,7 +1,5 @@
-Index: linux-2.6.24.7/drivers/mtd/chips/jedec_probe.c
-===================================================================
---- linux-2.6.24.7.orig/drivers/mtd/chips/jedec_probe.c
-+++ linux-2.6.24.7/drivers/mtd/chips/jedec_probe.c
+--- a/drivers/mtd/chips/jedec_probe.c
++++ b/drivers/mtd/chips/jedec_probe.c
 @@ -121,6 +121,10 @@
  #define UPD29F064115	0x221C
  
@@ -13,7 +11,7 @@ Index: linux-2.6.24.7/drivers/mtd/chips/jedec_probe.c
  #define PM49FL002	0x006D
  #define PM49FL004	0x006E
  #define PM49FL008	0x006A
-@@ -1264,6 +1268,58 @@ static const struct amd_flash_info jedec
+@@ -1264,6 +1268,58 @@
  			ERASEINFO(0x02000,2),
  			ERASEINFO(0x04000,1),
  		}
diff --git a/target/linux/adm5120/patches/103-mtd_trxsplit.patch b/target/linux/adm5120/patches/103-mtd_trxsplit.patch
index 73df926f74..267293aa56 100644
--- a/target/linux/adm5120/patches/103-mtd_trxsplit.patch
+++ b/target/linux/adm5120/patches/103-mtd_trxsplit.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.24.7/drivers/mtd/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/mtd/Kconfig
-+++ linux-2.6.24.7/drivers/mtd/Kconfig
-@@ -57,6 +57,11 @@ config MTD_ROOTFS_SPLIT
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -57,6 +57,11 @@
  	depends on MTD_PARTITIONS
  	default y
  
@@ -14,11 +12,9 @@ Index: linux-2.6.24.7/drivers/mtd/Kconfig
  config MTD_REDBOOT_PARTS
  	tristate "RedBoot partition table parsing"
  	depends on MTD_PARTITIONS
-Index: linux-2.6.24.7/drivers/mtd/Makefile
-===================================================================
---- linux-2.6.24.7.orig/drivers/mtd/Makefile
-+++ linux-2.6.24.7/drivers/mtd/Makefile
-@@ -8,6 +8,7 @@ mtd-y				:= mtdcore.o mtdsuper.o
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -8,6 +8,7 @@
  mtd-$(CONFIG_MTD_PARTITIONS)	+= mtdpart.o
  
  obj-$(CONFIG_MTD_CONCAT)	+= mtdconcat.o
diff --git a/target/linux/adm5120/patches/120-rb153_cf_driver.patch b/target/linux/adm5120/patches/120-rb153_cf_driver.patch
index 0e9ddacdac..ad07b7a8a7 100644
--- a/target/linux/adm5120/patches/120-rb153_cf_driver.patch
+++ b/target/linux/adm5120/patches/120-rb153_cf_driver.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.24.7/drivers/ata/Makefile
-===================================================================
---- linux-2.6.24.7.orig/drivers/ata/Makefile
-+++ linux-2.6.24.7/drivers/ata/Makefile
-@@ -69,6 +69,7 @@ obj-$(CONFIG_PATA_BF54X)	+= pata_bf54x.o
+--- a/drivers/ata/Makefile
++++ b/drivers/ata/Makefile
+@@ -69,6 +69,7 @@
  obj-$(CONFIG_PATA_PLATFORM)	+= pata_platform.o
  obj-$(CONFIG_PATA_OF_PLATFORM)	+= pata_of_platform.o
  obj-$(CONFIG_PATA_ICSIDE)	+= pata_icside.o
@@ -10,11 +8,9 @@ Index: linux-2.6.24.7/drivers/ata/Makefile
  # Should be last but two libata driver
  obj-$(CONFIG_PATA_ACPI)		+= pata_acpi.o
  # Should be last but one libata driver
-Index: linux-2.6.24.7/drivers/ata/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/ata/Kconfig
-+++ linux-2.6.24.7/drivers/ata/Kconfig
-@@ -660,4 +660,13 @@ config PATA_BF54X
+--- a/drivers/ata/Kconfig
++++ b/drivers/ata/Kconfig
+@@ -660,4 +660,13 @@
  
  	  If unsure, say N.
  
diff --git a/target/linux/adm5120/patches/140-cmdline_hack.patch b/target/linux/adm5120/patches/140-cmdline_hack.patch
index b366129c56..1ced3f62dd 100644
--- a/target/linux/adm5120/patches/140-cmdline_hack.patch
+++ b/target/linux/adm5120/patches/140-cmdline_hack.patch
@@ -1,7 +1,5 @@
-Index: linux-2.6.24.7/arch/mips/kernel/head.S
-===================================================================
---- linux-2.6.24.7.orig/arch/mips/kernel/head.S
-+++ linux-2.6.24.7/arch/mips/kernel/head.S
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
 @@ -126,7 +126,12 @@
  	/*
  	 * Reserved space for exception handlers.
diff --git a/target/linux/adm5120/patches/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches/200-amba_pl010_hacks.patch
index 120d1ac316..97b06acec8 100644
--- a/target/linux/adm5120/patches/200-amba_pl010_hacks.patch
+++ b/target/linux/adm5120/patches/200-amba_pl010_hacks.patch
@@ -1,7 +1,5 @@
-Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
-===================================================================
---- linux-2.6.24.7.orig/drivers/serial/amba-pl010.c
-+++ linux-2.6.24.7/drivers/serial/amba-pl010.c
+--- a/drivers/serial/amba-pl010.c
++++ b/drivers/serial/amba-pl010.c
 @@ -52,11 +52,10 @@
  
  #include <asm/io.h>
@@ -16,7 +14,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
  
  #define AMBA_ISR_PASS_LIMIT	256
  
-@@ -82,7 +81,7 @@ static void pl010_stop_tx(struct uart_po
+@@ -82,7 +81,7 @@
  	struct uart_amba_port *uap = (struct uart_amba_port *)port;
  	unsigned int cr;
  
@@ -25,7 +23,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
  	cr &= ~UART010_CR_TIE;
  	writel(cr, uap->port.membase + UART010_CR);
  }
-@@ -92,7 +91,7 @@ static void pl010_start_tx(struct uart_p
+@@ -92,7 +91,7 @@
  	struct uart_amba_port *uap = (struct uart_amba_port *)port;
  	unsigned int cr;
  
@@ -34,7 +32,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
  	cr |= UART010_CR_TIE;
  	writel(cr, uap->port.membase + UART010_CR);
  }
-@@ -102,7 +101,7 @@ static void pl010_stop_rx(struct uart_po
+@@ -102,7 +101,7 @@
  	struct uart_amba_port *uap = (struct uart_amba_port *)port;
  	unsigned int cr;
  
@@ -43,7 +41,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
  	cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
  	writel(cr, uap->port.membase + UART010_CR);
  }
-@@ -112,7 +111,7 @@ static void pl010_enable_ms(struct uart_
+@@ -112,7 +111,7 @@
  	struct uart_amba_port *uap = (struct uart_amba_port *)port;
  	unsigned int cr;
  
@@ -52,7 +50,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
  	cr |= UART010_CR_MSIE;
  	writel(cr, uap->port.membase + UART010_CR);
  }
-@@ -122,9 +121,9 @@ static void pl010_rx_chars(struct uart_a
+@@ -122,9 +121,9 @@
  	struct tty_struct *tty = uap->port.info->tty;
  	unsigned int status, ch, flag, rsr, max_count = 256;
  
@@ -64,7 +62,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
  		flag = TTY_NORMAL;
  
  		uap->port.icount.rx++;
-@@ -133,7 +132,7 @@ static void pl010_rx_chars(struct uart_a
+@@ -133,7 +132,7 @@
  		 * Note that the error handling code is
  		 * out of the main execution path
  		 */
@@ -73,7 +71,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
  		if (unlikely(rsr & UART01x_RSR_ANY)) {
  			writel(0, uap->port.membase + UART01x_ECR);
  
-@@ -165,7 +164,7 @@ static void pl010_rx_chars(struct uart_a
+@@ -165,7 +164,7 @@
  		uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
  
  	ignore_char:
@@ -82,7 +80,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
  	}
  	spin_unlock(&uap->port.lock);
  	tty_flip_buffer_push(tty);
-@@ -210,7 +209,7 @@ static void pl010_modem_status(struct ua
+@@ -210,7 +209,7 @@
  
  	writel(0, uap->port.membase + UART010_ICR);
  
@@ -91,7 +89,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
  
  	delta = status ^ uap->old_status;
  	uap->old_status = status;
-@@ -238,7 +237,7 @@ static irqreturn_t pl010_int(int irq, vo
+@@ -238,7 +237,7 @@
  
  	spin_lock(&uap->port.lock);
  
@@ -100,7 +98,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
  	if (status) {
  		do {
  			if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
-@@ -251,7 +250,7 @@ static irqreturn_t pl010_int(int irq, vo
+@@ -251,7 +250,7 @@
  			if (pass_counter-- == 0)
  				break;
  
@@ -109,7 +107,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
  		} while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
  				   UART010_IIR_TIS));
  		handled = 1;
-@@ -265,7 +264,7 @@ static irqreturn_t pl010_int(int irq, vo
+@@ -265,7 +264,7 @@
  static unsigned int pl010_tx_empty(struct uart_port *port)
  {
  	struct uart_amba_port *uap = (struct uart_amba_port *)port;
@@ -118,7 +116,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
  	return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
  }
  
-@@ -275,7 +274,7 @@ static unsigned int pl010_get_mctrl(stru
+@@ -275,7 +274,7 @@
  	unsigned int result = 0;
  	unsigned int status;
  
@@ -127,7 +125,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
  	if (status & UART01x_FR_DCD)
  		result |= TIOCM_CAR;
  	if (status & UART01x_FR_DSR)
-@@ -301,7 +300,7 @@ static void pl010_break_ctl(struct uart_
+@@ -301,7 +300,7 @@
  	unsigned int lcr_h;
  
  	spin_lock_irqsave(&uap->port.lock, flags);
@@ -136,7 +134,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
  	if (break_state == -1)
  		lcr_h |= UART01x_LCRH_BRK;
  	else
-@@ -334,7 +333,7 @@ static int pl010_startup(struct uart_por
+@@ -334,7 +333,7 @@
  	/*
  	 * initialise the old status of the modem signals
  	 */
@@ -145,7 +143,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
  
  	/*
  	 * Finally, enable interrupts
-@@ -365,7 +364,7 @@ static void pl010_shutdown(struct uart_p
+@@ -365,7 +364,7 @@
  	writel(0, uap->port.membase + UART010_CR);
  
  	/* disable break condition and fifos */
@@ -154,7 +152,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
  		~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
  	       uap->port.membase + UART010_LCRH);
  
-@@ -387,7 +386,7 @@ pl010_set_termios(struct uart_port *port
+@@ -387,7 +386,7 @@
  	/*
  	 * Ask the core to calculate the divisor for us.
  	 */
@@ -163,7 +161,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
  	quot = uart_get_divisor(port, baud);
  
  	switch (termios->c_cflag & CSIZE) {
-@@ -450,7 +449,7 @@ pl010_set_termios(struct uart_port *port
+@@ -450,7 +449,7 @@
  		uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
  
  	/* first, disable everything */
@@ -172,7 +170,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
  
  	if (UART_ENABLE_MS(port, termios->c_cflag))
  		old_cr |= UART010_CR_MSIE;
-@@ -540,7 +539,7 @@ static struct uart_ops amba_pl010_pops =
+@@ -540,7 +539,7 @@
  	.verify_port	= pl010_verify_port,
  };
  
@@ -181,7 +179,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
  
  #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
  
-@@ -550,7 +549,7 @@ static void pl010_console_putchar(struct
+@@ -550,7 +549,7 @@
  	unsigned int status;
  
  	do {
@@ -190,7 +188,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
  		barrier();
  	} while (!UART_TX_READY(status));
  	writel(ch, uap->port.membase + UART01x_DR);
-@@ -567,7 +566,7 @@ pl010_console_write(struct console *co, 
+@@ -567,7 +566,7 @@
  	/*
  	 *	First save the CR then disable the interrupts
  	 */
@@ -199,7 +197,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
  	writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
  
  	uart_console_write(&uap->port, s, count, pl010_console_putchar);
-@@ -577,7 +576,7 @@ pl010_console_write(struct console *co, 
+@@ -577,7 +576,7 @@
  	 *	and restore the TCR
  	 */
  	do {
@@ -208,7 +206,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
  		barrier();
  	} while (status & UART01x_FR_BUSY);
  	writel(old_cr, uap->port.membase + UART010_CR);
-@@ -589,9 +588,9 @@ static void __init
+@@ -589,9 +588,9 @@
  pl010_console_get_options(struct uart_amba_port *uap, int *baud,
  			     int *parity, int *bits)
  {
@@ -220,7 +218,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
  
  		*parity = 'n';
  		if (lcr_h & UART01x_LCRH_PEN) {
-@@ -606,8 +605,8 @@ pl010_console_get_options(struct uart_am
+@@ -606,8 +605,8 @@
  		else
  			*bits = 8;
  
@@ -231,7 +229,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
  		*baud = uap->port.uartclk / (16 * (quot + 1));
  	}
  }
-@@ -625,7 +624,7 @@ static int __init pl010_console_setup(st
+@@ -625,7 +624,7 @@
  	 * if so, search for the first available port that does have
  	 * console support.
  	 */
@@ -240,7 +238,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
  		co->index = 0;
  	uap = amba_ports[co->index];
  	if (!uap)
-@@ -643,7 +642,7 @@ static int __init pl010_console_setup(st
+@@ -643,7 +642,7 @@
  
  static struct uart_driver amba_reg;
  static struct console amba_console = {
@@ -249,7 +247,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
  	.write		= pl010_console_write,
  	.device		= uart_console_device,
  	.setup		= pl010_console_setup,
-@@ -659,11 +658,11 @@ static struct console amba_console = {
+@@ -659,11 +658,11 @@
  
  static struct uart_driver amba_reg = {
  	.owner			= THIS_MODULE,
@@ -264,11 +262,9 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
  	.cons			= AMBA_CONSOLE,
  };
  
-Index: linux-2.6.24.7/drivers/serial/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/serial/Kconfig
-+++ linux-2.6.24.7/drivers/serial/Kconfig
-@@ -287,10 +287,25 @@ config SERIAL_AMBA_PL010
+--- a/drivers/serial/Kconfig
++++ b/drivers/serial/Kconfig
+@@ -287,10 +287,25 @@
  	help
  	  This selects the ARM(R) AMBA(R) PrimeCell PL010 UART.  If you have
  	  an Integrator/AP or Integrator/PP2 platform, or if you have a
diff --git a/target/linux/adm5120/patches/201-amba_bus_hacks.patch b/target/linux/adm5120/patches/201-amba_bus_hacks.patch
index 4fe89b991a..299f216523 100644
--- a/target/linux/adm5120/patches/201-amba_bus_hacks.patch
+++ b/target/linux/adm5120/patches/201-amba_bus_hacks.patch
@@ -1,7 +1,5 @@
-Index: linux-2.6.24.7/drivers/amba/bus.c
-===================================================================
---- linux-2.6.24.7.orig/drivers/amba/bus.c
-+++ linux-2.6.24.7/drivers/amba/bus.c
+--- a/drivers/amba/bus.c
++++ b/drivers/amba/bus.c
 @@ -17,6 +17,10 @@
  #include <asm/io.h>
  #include <asm/sizes.h>
diff --git a/target/linux/adm5120/patches/202-pci_disable_common_quirks.patch b/target/linux/adm5120/patches/202-pci_disable_common_quirks.patch
index 52fa931c84..13142add37 100644
--- a/target/linux/adm5120/patches/202-pci_disable_common_quirks.patch
+++ b/target/linux/adm5120/patches/202-pci_disable_common_quirks.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.24.7/drivers/pci/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/pci/Kconfig
-+++ linux-2.6.24.7/drivers/pci/Kconfig
-@@ -42,6 +42,12 @@ config PCI_DEBUG
+--- a/drivers/pci/Kconfig
++++ b/drivers/pci/Kconfig
+@@ -42,6 +42,12 @@
  
  	  When in doubt, say N.
  
@@ -15,10 +13,8 @@ Index: linux-2.6.24.7/drivers/pci/Kconfig
  config HT_IRQ
  	bool "Interrupts on hypertransport devices"
  	default y
-Index: linux-2.6.24.7/drivers/pci/quirks.c
-===================================================================
---- linux-2.6.24.7.orig/drivers/pci/quirks.c
-+++ linux-2.6.24.7/drivers/pci/quirks.c
+--- a/drivers/pci/quirks.c
++++ b/drivers/pci/quirks.c
 @@ -23,6 +23,7 @@
  #include <linux/acpi.h>
  #include "pci.h"
@@ -27,7 +23,7 @@ Index: linux-2.6.24.7/drivers/pci/quirks.c
  /* The Mellanox Tavor device gives false positive parity errors
   * Mark this device with a broken_parity_status, to allow
   * PCI scanning code to "skip" this now blacklisted device.
-@@ -1480,6 +1481,7 @@ static void __devinit fixup_rev1_53c810(
+@@ -1480,6 +1481,7 @@
  	}
  }
  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
@@ -35,7 +31,7 @@ Index: linux-2.6.24.7/drivers/pci/quirks.c
  
  static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end)
  {
-@@ -1543,6 +1545,7 @@ void pci_fixup_device(enum pci_fixup_pas
+@@ -1543,6 +1545,7 @@
  }
  EXPORT_SYMBOL(pci_fixup_device);
  
@@ -43,7 +39,7 @@ Index: linux-2.6.24.7/drivers/pci/quirks.c
  /* Enable 1k I/O space granularity on the Intel P64H2 */
  static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
  {
-@@ -1756,3 +1759,4 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AT
+@@ -1756,3 +1759,4 @@
  			quirk_msi_intx_disable_bug);
  
  #endif /* CONFIG_PCI_MSI */
diff --git a/target/linux/adm5120/patches/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches/203-gpio_leds_brightness.patch
index 1c53192bc3..3e9f5271c5 100644
--- a/target/linux/adm5120/patches/203-gpio_leds_brightness.patch
+++ b/target/linux/adm5120/patches/203-gpio_leds_brightness.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.24.7/drivers/leds/leds-gpio.c
-===================================================================
---- linux-2.6.24.7.orig/drivers/leds/leds-gpio.c
-+++ linux-2.6.24.7/drivers/leds/leds-gpio.c
-@@ -41,13 +41,17 @@ static void gpio_led_set(struct led_clas
+--- a/drivers/leds/leds-gpio.c
++++ b/drivers/leds/leds-gpio.c
+@@ -41,13 +41,17 @@
  		container_of(led_cdev, struct gpio_led_data, cdev);
  	int level;
  
diff --git a/target/linux/adm5120/patches/310-adm5120_wdt.patch b/target/linux/adm5120/patches/310-adm5120_wdt.patch
index 2729243466..1136ee8e65 100644
--- a/target/linux/adm5120/patches/310-adm5120_wdt.patch
+++ b/target/linux/adm5120/patches/310-adm5120_wdt.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.24.7/drivers/watchdog/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/watchdog/Kconfig
-+++ linux-2.6.24.7/drivers/watchdog/Kconfig
-@@ -607,6 +607,18 @@ config SBC_EPX_C3_WATCHDOG
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -607,6 +607,18 @@
  
  # MIPS Architecture
  
@@ -21,11 +19,9 @@ Index: linux-2.6.24.7/drivers/watchdog/Kconfig
  config INDYDOG
  	tristate "Indy/I2 Hardware Watchdog"
  	depends on SGI_IP22
-Index: linux-2.6.24.7/drivers/watchdog/Makefile
-===================================================================
---- linux-2.6.24.7.orig/drivers/watchdog/Makefile
-+++ linux-2.6.24.7/drivers/watchdog/Makefile
-@@ -89,6 +89,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -89,6 +89,7 @@
  # M68KNOMMU Architecture
  
  # MIPS Architecture