aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorChris Blake <chrisrblake93@gmail.com>2019-05-05 12:56:03 -0500
committerChristian Lamparter <chunkeey@gmail.com>2019-05-18 16:44:41 +0200
commitaee5c9861996983394ac49f91a831c4641a4bf83 (patch)
tree9a7bf1ad39ce0b9c8706e5798efc937c1082112d /target/linux
parent2fdd02cc7c3516c2cce2ace2c7b539e0821ecbe8 (diff)
downloadupstream-aee5c9861996983394ac49f91a831c4641a4bf83.tar.gz
upstream-aee5c9861996983394ac49f91a831c4641a4bf83.tar.bz2
upstream-aee5c9861996983394ac49f91a831c4641a4bf83.zip
ath79: add support for Aruba AP-105
SoC: Atheros AR7161-8C1A @ 680 MHz RAM: 128MB - 2x Etron Technology EM6AB160TSA-5G NOR: 16MB - 1x MXIC MX25L12845EMI-10G (SPI-NOR) WI1: Atheros AR9223-AC1A 802.11bgn WI2: Atheros AR9220-AC1A 802.11an ETH: Atheros AR8021-BL1E + PoE LED: Dual-Color Power/Status, Ethernet, WLAN2G and WLAN5G BTN: 1 x Reset I2C: AT97SC4303s TPM (needs driver!) CON: RS232-level 8P8C/RJ45 Console Port - 9600 Baud Factory installation: - Needs a u-boot replacement. See Wiki for information on how to do a in-circut flash with a SPI-Flasher like a CH314A or flashrom. Wiki page can be found at https://openwrt.org/toh/aruba/aruba_ap-105 - Be careful when dis- and reassembling the device to not squish any of the antenna cables in the process! - Be sure to make a full 16 MiB backup of your device before flashing the new u-boot! This is needed if you ever have interest in reverting back to stock firmware. Not working: - TPM (needs a driver) Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ath79/dts/ar7161_aruba_ap-105.dts190
-rw-r--r--target/linux/ath79/image/generic.mk8
3 files changed, 199 insertions, 0 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 5892baca80..897b59af33 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -9,6 +9,7 @@ ath79_setup_interfaces()
local board="$1"
case "$board" in
+ aruba,ap-105|\
avm,fritz300e|\
devolo,dvl1200i|\
devolo,dvl1750c|\
diff --git a/target/linux/ath79/dts/ar7161_aruba_ap-105.dts b/target/linux/ath79/dts/ar7161_aruba_ap-105.dts
new file mode 100644
index 0000000000..45d4d03f31
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_aruba_ap-105.dts
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar7100.dtsi"
+
+/ {
+ compatible = "aruba,ap-105", "qca,ar7161";
+ model = "Aruba AP-105";
+
+ chosen {
+ bootargs = "console=ttyS0,9600";
+ };
+
+ aliases {
+ led-boot = &power_green;
+ led-failsafe = &power_red;
+ led-running = &power_green;
+ led-upgrade = &power_green;
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "ref";
+ clock-frequency = <40000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power_green: power_green {
+ label = "ap-105:green:power";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ power_red: power_red {
+ label = "ap-105:red:power";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ panic-indicator;
+ };
+
+ wifi_2g_red: wifi_2g_red {
+ label = "ap-105:red:wlan2g";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi_5g_red: wifi_5g_red {
+ label = "ap-105:red:wlan5g";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wifi_2g_green {
+ label = "ap-105:green:wlan2g";
+ gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wifi_5g_green {
+ label = "ap-105:green:wlan5g";
+ gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ i2c {
+ compatible = "i2c-gpio";
+
+ sda-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ scl-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+
+ /* can be removed on 4.19 */
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>,
+ <&gpio 4 GPIO_ACTIVE_LOW>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tpm@29 {
+ compatible = "atmel,at97sc3203s";
+ reg = <0x29>;
+
+ /* triggering it, will also kill system */
+ reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+
+ ath9k0: wifi@0,11 { /* 2.4 GHz */
+ compatible = "pci168c,0029";
+ mtd-mac-address = <&hwinfo 0x1c>;
+ mtd-mac-address-increment = <1>;
+ reg = <0x8800 0 0 0 0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ ath9k1: wifi@0,12 { /* 5 GHz */
+ compatible = "pci168c,0029";
+ mtd-mac-address = <&hwinfo 0x1c>;
+ mtd-mac-address-increment = <2>;
+ reg = <0x9000 0 0 0 0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0x1>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&eth0 {
+ status = "okay";
+ mtd-mac-address = <&hwinfo 0x1c>;
+
+ pll-data = <0x00110000 0x00001099 0x00991099>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "firmware";
+ reg = <0x40000 0xfa0000>;
+ compatible = "denx,uimage";
+ };
+
+ hwinfo: partition@fe0000 {
+ label = "hwinfo";
+ reg = <0xfe0000 0x10000>;
+ read-only;
+ };
+
+ partition@ff0000 {
+ label = "u-boot-env";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index a96c9d279a..dd5843d436 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -75,6 +75,14 @@ define Device/seama
SEAMA_SIGNATURE :=
endef
+define Device/aruba_ap-105
+ ATH_SOC := ar7161
+ DEVICE_TITLE := Aruba AP-105
+ IMAGE_SIZE := 16000k
+ DEVICE_PACKAGES := kmod-i2c-core kmod-i2c-gpio kmod-tpm-i2c-atmel
+endef
+TARGET_DEVICES += aruba_ap-105
+
define Device/avm_fritz300e
ATH_SOC := ar7242
DEVICE_TITLE := AVM FRITZ!WLAN Repeater 300E