brcm47xx: add initial support for kernel 3.9

SVN-Revision: 36926

30 files changed, 3419 insertions, 0 deletions

diff --git a/target/linux/brcm47xx/config-3.9 b/target/linux/brcm47xx/config-3.9
new file mode 100644
index 0000000000..dc3b9b826e
--- /dev/null
+++ b/target/linux/brcm47xx/config-3.9
@@ -0,0 +1,152 @@
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_ARPD is not set
+CONFIG_BCM47XX=y
+CONFIG_BCM47XX_BCMA=y
+CONFIG_BCM47XX_SSB=y
+CONFIG_BCM47XX_WDT=y
+CONFIG_BCMA=y
+CONFIG_BCMA_BLOCKIO=y
+CONFIG_BCMA_DEBUG=y
+CONFIG_BCMA_DRIVER_GMAC_CMN=y
+CONFIG_BCMA_DRIVER_GPIO=y
+CONFIG_BCMA_DRIVER_MIPS=y
+CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y
+CONFIG_BCMA_HOST_PCI=y
+CONFIG_BCMA_HOST_PCI_POSSIBLE=y
+CONFIG_BCMA_HOST_SOC=y
+CONFIG_BCMA_NFLASH=y
+CONFIG_BCMA_SFLASH=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CMDLINE="noinitrd console=ttyS0,115200"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+CONFIG_CPU_MIPSR1=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_FW_CFE=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MIPS=y
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_MT_DISABLED=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MTD_BCM47XXSFLASH=y
+CONFIG_MTD_BCM47XX_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_BCM47XXNFLASH=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_SM_COMMON is not set
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NO_EXCEPT_FILL=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PERCPU_RWSEM=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SSB=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_DEBUG=y
+CONFIG_SSB_DRIVER_EXTIF=y
+CONFIG_SSB_DRIVER_GIGE=y
+CONFIG_SSB_DRIVER_GPIO=y
+CONFIG_SSB_DRIVER_MIPS=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_EMBEDDED=y
+CONFIG_SSB_PCICORE_HOSTMODE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_SERIAL=y
+CONFIG_SSB_SFLASH=y
+CONFIG_SSB_SPROM=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_UIDGID_CONVERTED=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+# CONFIG_USB_HCD_BCMA is not set
+# CONFIG_USB_HCD_SSB is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/brcm47xx/patches-3.9/026-mtd-bcm47xxpart-find-boot-partition-by-CFE-magic.patch b/target/linux/brcm47xx/patches-3.9/026-mtd-bcm47xxpart-find-boot-partition-by-CFE-magic.patch
new file mode 100644
index 0000000000..d3fb9d3a66
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/026-mtd-bcm47xxpart-find-boot-partition-by-CFE-magic.patch
@@ -0,0 +1,26 @@
+--- a/drivers/mtd/bcm47xxpart.c
++++ b/drivers/mtd/bcm47xxpart.c
+@@ -23,9 +23,10 @@
+  * Amount of bytes we read when analyzing each block of flash memory.
+  * Set it big enough to allow detecting partition and reading important data.
+  */
+-#define BCM47XXPART_BYTES_TO_READ	0x404
++#define BCM47XXPART_BYTES_TO_READ	0x4e8
+ 
+ /* Magics */
++#define CFE_MAGIC			0x43464531	/* 1EFC */
+ #define BOARD_DATA_MAGIC		0x5246504D	/* MPFR */
+ #define POT_MAGIC1			0x54544f50	/* POTT */
+ #define POT_MAGIC2			0x504f		/* OP */
+@@ -93,8 +94,9 @@ static int bcm47xxpart_parse(struct mtd_
+ 			continue;
+ 		}
+ 
+-		/* CFE has small NVRAM at 0x400 */
+-		if (buf[0x400 / 4] == NVRAM_HEADER) {
++		/* Magic or small NVRAM at 0x400 */
++		if (buf[0x4e0 / 4] == CFE_MAGIC ||
++		    buf[0x400 / 4] == NVRAM_HEADER) {
+ 			bcm47xxpart_add_part(&parts[curr_part++], "boot",
+ 					     offset, MTD_WRITEABLE);
+ 			continue;
diff --git a/target/linux/brcm47xx/patches-3.9/027-mtd-bcm47xxpart-get-nvram.patch b/target/linux/brcm47xx/patches-3.9/027-mtd-bcm47xxpart-get-nvram.patch
new file mode 100644
index 0000000000..4cd78c2011
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/027-mtd-bcm47xxpart-get-nvram.patch
@@ -0,0 +1,34 @@
+--- a/drivers/mtd/bcm47xxpart.c
++++ b/drivers/mtd/bcm47xxpart.c
+@@ -65,6 +65,7 @@ static int bcm47xxpart_parse(struct mtd_
+ 	int trx_part = -1;
+ 	int last_trx_part = -1;
+ 	int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
++	bool found_nvram = false;
+ 
+ 	if (blocksize <= 0x10000)
+ 		blocksize = 0x10000;
+@@ -190,12 +191,23 @@ static int bcm47xxpart_parse(struct mtd_
+ 		if (buf[0] == NVRAM_HEADER) {
+ 			bcm47xxpart_add_part(&parts[curr_part++], "nvram",
+ 					     master->size - blocksize, 0);
++			found_nvram = true;
+ 			break;
+ 		}
+ 	}
+ 
+ 	kfree(buf);
+ 
++	if (!found_nvram) {
++		pr_err("can not find a nvram partition reserve last block\n");
++		bcm47xxpart_add_part(&parts[curr_part++], "nvram_guess",
++				     master->size - blocksize * 2, MTD_WRITEABLE);
++		for (i = 0; i < curr_part; i++) {
++			if (parts[i].size + parts[i].offset == master->size)
++				parts[i].offset -= blocksize * 2;
++		}
++	}
++
+ 	/*
+ 	 * Assume that partitions end at the beginning of the one they are
+ 	 * followed by.
diff --git a/target/linux/brcm47xx/patches-3.9/028-mtd-bcm47xxpart-use-old-part-names.patch b/target/linux/brcm47xx/patches-3.9/028-mtd-bcm47xxpart-use-old-part-names.patch
new file mode 100644
index 0000000000..e43bb87283
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/028-mtd-bcm47xxpart-use-old-part-names.patch
@@ -0,0 +1,20 @@
+--- a/drivers/mtd/bcm47xxpart.c
++++ b/drivers/mtd/bcm47xxpart.c
+@@ -134,7 +134,7 @@ static int bcm47xxpart_parse(struct mtd_
+ 			trx = (struct trx_header *)buf;
+ 
+ 			trx_part = curr_part;
+-			bcm47xxpart_add_part(&parts[curr_part++], "firmware",
++			bcm47xxpart_add_part(&parts[curr_part++], "linux",
+ 					     offset, 0);
+ 
+ 			i = 0;
+@@ -147,7 +147,7 @@ static int bcm47xxpart_parse(struct mtd_
+ 				i++;
+ 			}
+ 
+-			bcm47xxpart_add_part(&parts[curr_part++], "linux",
++			bcm47xxpart_add_part(&parts[curr_part++], "kernel",
+ 					     offset + trx->offset[i], 0);
+ 			i++;
+ 
diff --git a/target/linux/brcm47xx/patches-3.9/052-mtd-add-serial-flash-driver.patch b/target/linux/brcm47xx/patches-3.9/052-mtd-add-serial-flash-driver.patch
new file mode 100644
index 0000000000..844f89d4b3
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/052-mtd-add-serial-flash-driver.patch
@@ -0,0 +1,345 @@
+--- a/drivers/mtd/devices/bcm47xxsflash.c
++++ b/drivers/mtd/devices/bcm47xxsflash.c
+@@ -1,47 +1,153 @@
+-#include <linux/kernel.h>
++/*
++ * Broadcom SiliconBackplane chipcommon serial flash interface
++ *
++ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de>
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#define pr_fmt(fmt) "bcm47xxsflash: " fmt
+ #include <linux/module.h>
+ #include <linux/slab.h>
++#include <linux/ioport.h>
++#include <linux/sched.h>
+ #include <linux/mtd/mtd.h>
++#include <linux/mtd/map.h>
++#include <linux/mtd/partitions.h>
++#include <linux/errno.h>
++#include <linux/delay.h>
+ #include <linux/platform_device.h>
+-#include <linux/bcma/bcma.h>
+-
+-#include "bcm47xxsflash.h"
++#include <linux/mtd/bcm47xxsflash.h>
+ 
+ MODULE_LICENSE("GPL");
+-MODULE_DESCRIPTION("Serial flash driver for BCMA bus");
++MODULE_DESCRIPTION("BCM47XX serial flash driver");
+ 
+ static const char *probes[] = { "bcm47xxpart", NULL };
+ 
++static int
++sflash_mtd_poll(struct bcm47xxsflash *sflash, unsigned int offset, int timeout)
++{
++	unsigned long now = jiffies;
++
++	for (;;) {
++		if (!sflash->poll(sflash, offset)) {
++			break;
++		}
++		if (time_after(jiffies, now + timeout)) {
++			pr_err("timeout while polling\n");
++			return -ETIMEDOUT;
++
++		}
++		cpu_relax();
++		udelay(1);
++	}
++
++	return 0;
++}
++
+ static int bcm47xxsflash_read(struct mtd_info *mtd, loff_t from, size_t len,
+ 			      size_t *retlen, u_char *buf)
+ {
+-	struct bcm47xxsflash *b47s = mtd->priv;
++	struct bcm47xxsflash *sflash = (struct bcm47xxsflash *)mtd->priv;
+ 
+ 	/* Check address range */
++	if (!len)
++		return 0;
++
+ 	if ((from + len) > mtd->size)
+ 		return -EINVAL;
+ 
+-	memcpy_fromio(buf, (void __iomem *)KSEG0ADDR(b47s->window + from),
++	memcpy_fromio(buf, (void __iomem *)KSEG0ADDR(sflash->window + from),
+ 		      len);
+ 	*retlen = len;
+ 
+ 	return len;
+ }
+ 
+-static void bcm47xxsflash_fill_mtd(struct bcm47xxsflash *b47s)
++static int
++sflash_mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
+ {
+-	struct mtd_info *mtd = &b47s->mtd;
++	int bytes;
++	int ret;
++	struct bcm47xxsflash *sflash = (struct bcm47xxsflash *)mtd->priv;
+ 
+-	mtd->priv = b47s;
+-	mtd->name = "bcm47xxsflash";
+-	mtd->owner = THIS_MODULE;
+-	mtd->type = MTD_ROM;
+-	mtd->size = b47s->size;
+-	mtd->_read = bcm47xxsflash_read;
++	/* Check address range */
++	if (!len)
++		return 0;
++
++	if ((to + len) > mtd->size)
++		return -EINVAL;
++
++	*retlen = 0;
++	while (len) {
++		ret = sflash->write(sflash, to, len, buf);
++		if (ret < 0)
++			return ret;
++
++		bytes = ret;
++
++		ret = sflash_mtd_poll(sflash, (unsigned int) to, HZ / 10);
++		if (ret)
++			return ret;
++
++		to += (loff_t) bytes;
++		len -= bytes;
++		buf += bytes;
++		*retlen += bytes;
++	}
+ 
+-	/* TODO: implement writing support and verify/change following code */
+-	mtd->flags = MTD_CAP_ROM;
+-	mtd->writebufsize = mtd->writesize = 1;
++	return 0;
++}
++
++static int
++sflash_mtd_erase(struct mtd_info *mtd, struct erase_info *erase)
++{
++	struct bcm47xxsflash *sflash = (struct bcm47xxsflash *) mtd->priv;
++	int i, j, ret = 0;
++	unsigned int addr, len;
++
++	/* Check address range */
++	if (!erase->len)
++		return 0;
++	if ((erase->addr + erase->len) > mtd->size)
++		return -EINVAL;
++
++	addr = erase->addr;
++	len = erase->len;
++
++	/* Ensure that requested regions are aligned */
++	for (i = 0; i < mtd->numeraseregions; i++) {
++		for (j = 0; j < mtd->eraseregions[i].numblocks; j++) {
++			if (addr == mtd->eraseregions[i].offset +
++					mtd->eraseregions[i].erasesize * j &&
++			    len >= mtd->eraseregions[i].erasesize) {
++				ret = sflash->erase(sflash, addr);
++				if (ret < 0)
++					break;
++				ret = sflash_mtd_poll(sflash, addr, 10 * HZ);
++				if (ret)
++					break;
++				addr += mtd->eraseregions[i].erasesize;
++				len -= mtd->eraseregions[i].erasesize;
++			}
++		}
++		if (ret)
++			break;
++	}
++
++	/* Set erase status */
++	if (ret)
++		erase->state = MTD_ERASE_FAILED;
++	else
++		erase->state = MTD_ERASE_DONE;
++
++	/* Call erase callback */
++	if (erase->callback)
++		erase->callback(erase);
++
++	return ret;
+ }
+ 
+ /**************************************************
+@@ -50,53 +156,94 @@ static void bcm47xxsflash_fill_mtd(struc
+ 
+ static int bcm47xxsflash_bcma_probe(struct platform_device *pdev)
+ {
+-	struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev);
+-	struct bcm47xxsflash *b47s;
+-	int err;
++	struct bcm47xxsflash *sflash = dev_get_platdata(&pdev->dev);
++	struct mtd_info *mtd;
++	struct mtd_erase_region_info *eraseregions;
++	int ret = 0;
++
++	mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
++	if (!mtd){
++		ret =  -ENOMEM;
++		goto err_out;
++	}
+ 
+-	b47s = kzalloc(sizeof(*b47s), GFP_KERNEL);
+-	if (!b47s) {
+-		err = -ENOMEM;
+-		goto out;
+-	}
+-	sflash->priv = b47s;
+-
+-	b47s->window = sflash->window;
+-	b47s->blocksize = sflash->blocksize;
+-	b47s->numblocks = sflash->numblocks;
+-	b47s->size = sflash->size;
+-	bcm47xxsflash_fill_mtd(b47s);
+-
+-	err = mtd_device_parse_register(&b47s->mtd, probes, NULL, NULL, 0);
+-	if (err) {
+-		pr_err("Failed to register MTD device: %d\n", err);
+-		goto err_dev_reg;
++	eraseregions = kzalloc(sizeof(struct mtd_erase_region_info), GFP_KERNEL);
++	if (!eraseregions) {
++		ret =  -ENOMEM;
++		goto err_free_mtd;
+ 	}
+ 
++	pr_info("found serial flash: blocksize=%dKB, numblocks=%d, size=%dKB\n",
++		sflash->blocksize / 1024, sflash->numblocks, sflash->size / 1024);
++
++	/* Setup region info */
++	eraseregions->offset = 0;
++	eraseregions->erasesize = sflash->blocksize;
++	eraseregions->numblocks = sflash->numblocks;
++	if (eraseregions->erasesize > mtd->erasesize)
++		mtd->erasesize = eraseregions->erasesize;
++	mtd->size = sflash->size;
++	mtd->numeraseregions = 1;
++
++	/* Register with MTD */
++	mtd->name = "bcm47xx-sflash";
++	mtd->type = MTD_NORFLASH;
++	mtd->flags = MTD_CAP_NORFLASH;
++	mtd->eraseregions = eraseregions;
++	mtd->_erase = sflash_mtd_erase;
++	mtd->_read = bcm47xxsflash_read;
++	mtd->_write = sflash_mtd_write;
++	mtd->writesize = 1;
++	mtd->priv = sflash;
++	ret = dev_set_drvdata(&pdev->dev, mtd);
++	mtd->owner = THIS_MODULE;
++	if (ret) {
++		pr_err("adding private data failed\n");
++		goto err_free_eraseregions;
++	}
++
++	ret = mtd_device_parse_register(mtd, probes, NULL, NULL, 0);
++
++	if (ret) {
++		pr_err("mtd_device_register failed\n");
++		goto err_free_eraseregions;
++	}
+ 	return 0;
+ 
+-err_dev_reg:
+-	kfree(&b47s->mtd);
+-out:
+-	return err;
++err_free_eraseregions:
++	kfree(eraseregions);
++err_free_mtd:
++	kfree(mtd);
++err_out:
++	return ret;
+ }
+ 
+ static int bcm47xxsflash_bcma_remove(struct platform_device *pdev)
+ {
+-	struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev);
+-	struct bcm47xxsflash *b47s = sflash->priv;
+-
+-	mtd_device_unregister(&b47s->mtd);
+-	kfree(b47s);
++	struct mtd_info *mtd = dev_get_drvdata(&pdev->dev);
+ 
++	if (mtd) {
++		mtd_device_unregister(mtd);
++		map_destroy(mtd);
++		kfree(mtd->eraseregions);
++		kfree(mtd);
++		dev_set_drvdata(&pdev->dev, NULL);
++	}
+ 	return 0;
+ }
+ 
++static const struct platform_device_id bcm47xxsflash_table[] = {
++	{ "bcm47xx-sflash", 0 },
++	{ }
++};
++MODULE_DEVICE_TABLE(platform, bcm47xxsflash_table);
++
+ static struct platform_driver bcma_sflash_driver = {
++	.id_table	= bcm47xxsflash_table,
+ 	.probe	= bcm47xxsflash_bcma_probe,
+ 	.remove = bcm47xxsflash_bcma_remove,
+ 	.driver = {
+-		.name = "bcma_sflash",
++		.name = "bcm47xx-sflash",
+ 		.owner = THIS_MODULE,
+ 	},
+ };
+@@ -111,8 +258,7 @@ static int __init bcm47xxsflash_init(voi
+ 
+ 	err = platform_driver_register(&bcma_sflash_driver);
+ 	if (err)
+-		pr_err("Failed to register BCMA serial flash driver: %d\n",
+-		       err);
++		pr_err("error registering platform driver: %i\n", err);
+ 
+ 	return err;
+ }
+--- /dev/null
++++ b/include/linux/mtd/bcm47xxsflash.h
+@@ -0,0 +1,33 @@
++#ifndef LINUX_MTD_BCM47XX_SFLASH_H_
++#define LINUX_MTD_BCM47XX_SFLASH_H_
++
++#include <linux/mtd/mtd.h>
++
++enum bcm47xxsflash_type {
++	BCM47XX_SFLASH_SSB,
++	BCM47XX_SFLASH_BCMA,
++};
++
++struct ssb_chipcommon;
++struct bcma_drv_cc;
++
++struct bcm47xxsflash {
++	enum bcm47xxsflash_type type;
++	union {
++		struct ssb_chipcommon *scc;
++		struct bcma_drv_cc *bcc;
++	};
++
++	bool present;
++	u16 numblocks;
++	u32 window;
++	u32 blocksize;
++	u32 size;
++
++	int (*poll)(struct bcm47xxsflash *dev, u32 offset);
++	int (*write)(struct bcm47xxsflash *dev, u32 offset, u32 len, const u8 *buf);
++	int (*erase)(struct bcm47xxsflash *dev, u32 offset);
++
++	struct mtd_info *mtd;
++};
++#endif /* LINUX_MTD_BCM47XX_SFLASH_H_ */
diff --git a/target/linux/brcm47xx/patches-3.9/060-ssb-add-serial-flash-driver.patch b/target/linux/brcm47xx/patches-3.9/060-ssb-add-serial-flash-driver.patch
new file mode 100644
index 0000000000..1148a489db
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/060-ssb-add-serial-flash-driver.patch
@@ -0,0 +1,372 @@
+--- a/drivers/ssb/Kconfig
++++ b/drivers/ssb/Kconfig
+@@ -139,7 +139,7 @@ config SSB_DRIVER_MIPS
+ 
+ config SSB_SFLASH
+ 	bool "SSB serial flash support"
+-	depends on SSB_DRIVER_MIPS && BROKEN
++	depends on SSB_DRIVER_MIPS
+ 	default y
+ 
+ # Assumption: We are on embedded, if we compile the MIPS core.
+--- a/drivers/ssb/driver_chipcommon_sflash.c
++++ b/drivers/ssb/driver_chipcommon_sflash.c
+@@ -1,14 +1,35 @@
+ /*
+  * Sonics Silicon Backplane
+  * ChipCommon serial flash interface
++ * Copyright 2011, Jonas Gorski <jonas.gorski@gmail.com>
++ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de>
++ * Copyright 2010, Broadcom Corporation
+  *
+  * Licensed under the GNU/GPL. See COPYING for details.
+  */
+ 
++#include <linux/platform_device.h>
++#include <linux/delay.h>
+ #include <linux/ssb/ssb.h>
++#include <linux/ssb/ssb_driver_chipcommon.h>
+ 
+ #include "ssb_private.h"
+ 
++#define NUM_RETRIES	3
++
++static struct resource ssb_sflash_resource = {
++	.name	= "ssb_sflash",
++	.start	= SSB_FLASH2,
++	.end	= 0,
++	.flags  = IORESOURCE_MEM | IORESOURCE_READONLY,
++};
++
++struct platform_device ssb_sflash_dev = {
++	.name		= "bcm47xx-sflash",
++	.resource	= &ssb_sflash_resource,
++	.num_resources	= 1,
++};
++
+ struct ssb_sflash_tbl_e {
+ 	char *name;
+ 	u32 id;
+@@ -16,7 +37,7 @@ struct ssb_sflash_tbl_e {
+ 	u16 numblocks;
+ };
+ 
+-static struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
++static const struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
+ 	{ "M25P20", 0x11, 0x10000, 4, },
+ 	{ "M25P40", 0x12, 0x10000, 8, },
+ 
+@@ -27,7 +48,7 @@ static struct ssb_sflash_tbl_e ssb_sflas
+ 	{ 0 },
+ };
+ 
+-static struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
++static const struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
+ 	{ "SST25WF512", 1, 0x1000, 16, },
+ 	{ "SST25VF512", 0x48, 0x1000, 16, },
+ 	{ "SST25WF010", 2, 0x1000, 32, },
+@@ -45,7 +66,7 @@ static struct ssb_sflash_tbl_e ssb_sflas
+ 	{ 0 },
+ };
+ 
+-static struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
++static const struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
+ 	{ "AT45DB011", 0xc, 256, 512, },
+ 	{ "AT45DB021", 0x14, 256, 1024, },
+ 	{ "AT45DB041", 0x1c, 256, 2048, },
+@@ -70,10 +91,186 @@ static void ssb_sflash_cmd(struct ssb_ch
+ 	pr_err("SFLASH control command failed (timeout)!\n");
+ }
+ 
++static void ssb_sflash_write_u8(struct ssb_chipcommon *chipco, u32 offset, u8 byte)
++{
++	chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, offset);
++	chipco_write32(chipco, SSB_CHIPCO_FLASHDATA, byte);
++}
++
++/* Poll for command completion. Returns zero when complete. */
++static int ssb_sflash_poll(struct bcm47xxsflash *dev, u32 offset)
++{
++	struct ssb_chipcommon *chipco = dev->scc;
++
++	if (offset >= chipco->sflash.size)
++		return -22;
++
++	switch (chipco->capabilities & SSB_CHIPCO_CAP_FLASHT) {
++	case SSB_CHIPCO_FLASHT_STSER:
++		/* Check for ST Write In Progress bit */
++		ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_RDSR);
++		return chipco_read32(chipco, SSB_CHIPCO_FLASHDATA)
++				& SSB_CHIPCO_FLASHDATA_ST_WIP;
++	case SSB_CHIPCO_FLASHT_ATSER:
++		/* Check for Atmel Ready bit */
++		ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_STATUS);
++		return !(chipco_read32(chipco, SSB_CHIPCO_FLASHDATA)
++				& SSB_CHIPCO_FLASHDATA_AT_READY);
++	}
++
++	return 0;
++}
++
++
++static int sflash_st_write(struct bcm47xxsflash *dev, u32 offset, u32 len,
++			   const u8 *buf)
++{
++	int written = 1;
++	struct ssb_chipcommon *chipco = dev->scc;
++
++	/* Enable writes */
++	ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_WREN);
++	ssb_sflash_write_u8(chipco, offset, *buf++);
++	/* Issue a page program with CSA bit set */
++	ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_CSA | SSB_CHIPCO_FLASHCTL_ST_PP);
++	offset++;
++	len--;
++	while (len > 0) {
++		if ((offset & 255) == 0) {
++			/* Page boundary, poll droping cs and return */
++			chipco_write32(chipco, SSB_CHIPCO_FLASHCTL, 0);
++			udelay(1);
++			if (!ssb_sflash_poll(dev, offset)) {
++				/* Flash rejected command */
++				return -EAGAIN;
++			}
++			return written;
++		} else {
++			/* Write single byte */
++			ssb_sflash_cmd(chipco,
++					SSB_CHIPCO_FLASHCTL_ST_CSA |
++					*buf++);
++		}
++		written++;
++		offset++;
++		len--;
++	}
++	/* All done, drop cs & poll */
++	chipco_write32(chipco, SSB_CHIPCO_FLASHCTL, 0);
++	udelay(1);
++	if (!ssb_sflash_poll(dev, offset)) {
++		/* Flash rejected command */
++		return -EAGAIN;
++	}
++	return written;
++}
++
++static int sflash_at_write(struct bcm47xxsflash *dev, u32 offset, u32 len,
++			   const u8 *buf)
++{
++	struct ssb_chipcommon *chipco = dev->scc;
++	u32 page, byte, mask;
++	int ret = 0;
++
++	mask = dev->blocksize - 1;
++	page = (offset & ~mask) << 1;
++	byte = offset & mask;
++	/* Read main memory page into buffer 1 */
++	if (byte || (len < dev->blocksize)) {
++		int i = 100;
++		chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, page);
++		ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_BUF1_LOAD);
++		/* 250 us for AT45DB321B */
++		while (i > 0 && ssb_sflash_poll(dev, offset)) {
++			udelay(10);
++			i--;
++		}
++		BUG_ON(!ssb_sflash_poll(dev, offset));
++	}
++	/* Write into buffer 1 */
++	for (ret = 0; (ret < (int)len) && (byte < dev->blocksize); ret++) {
++		ssb_sflash_write_u8(chipco, byte++, *buf++);
++		ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_BUF1_WRITE);
++	}
++	/* Write buffer 1 into main memory page */
++	chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, page);
++	ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_BUF1_PROGRAM);
++
++	return ret;
++}
++
++/* Write len bytes starting at offset into buf. Returns number of bytes
++ * written. Caller should poll for completion.
++ */
++static int ssb_sflash_write(struct bcm47xxsflash *dev, u32 offset, u32 len,
++		      const u8 *buf)
++{
++	int ret = 0, tries = NUM_RETRIES;
++	struct ssb_chipcommon *chipco = dev->scc;
++
++	if (!len)
++		return 0;
++
++	if ((offset + len) > chipco->sflash.size)
++		return -EINVAL;
++
++	switch (chipco->capabilities & SSB_CHIPCO_CAP_FLASHT) {
++	case SSB_CHIPCO_FLASHT_STSER:
++		do {
++			ret = sflash_st_write(dev, offset, len, buf);
++			tries--;
++		} while (ret == -EAGAIN && tries > 0);
++
++		if (ret == -EAGAIN && tries == 0) {
++			pr_info("ST Flash rejected write\n");
++			ret = -EIO;
++		}
++		break;
++	case SSB_CHIPCO_FLASHT_ATSER:
++		ret = sflash_at_write(dev, offset, len, buf);
++		break;
++	}
++
++	return ret;
++}
++
++/* Erase a region. Returns number of bytes scheduled for erasure.
++ * Caller should poll for completion.
++ */
++static int ssb_sflash_erase(struct bcm47xxsflash *dev, u32 offset)
++{
++	struct ssb_chipcommon *chipco = dev->scc;
++
++	if (offset >= chipco->sflash.size)
++		return -EINVAL;
++
++	switch (chipco->capabilities & SSB_CHIPCO_CAP_FLASHT) {
++	case SSB_CHIPCO_FLASHT_STSER:
++		ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_WREN);
++		chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, offset);
++		/* Newer flashes have "sub-sectors" which can be erased independently
++		 * with a new command: ST_SSE. The ST_SE command erases 64KB just as
++		 * before.
++		 */
++		if (dev->blocksize < (64 * 1024))
++			ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_SSE);
++		else
++			ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_SE);
++		return dev->blocksize;
++	case SSB_CHIPCO_FLASHT_ATSER:
++		chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, offset << 1);
++		ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_PAGE_ERASE);
++		return dev->blocksize;
++	}
++
++	return 0;
++}
++
+ /* Initialize serial flash access */
+ int ssb_sflash_init(struct ssb_chipcommon *cc)
+ {
+-	struct ssb_sflash_tbl_e *e;
++	struct bcm47xxsflash *sflash = &cc->sflash;
++	const struct ssb_sflash_tbl_e *e;
+ 	u32 id, id2;
+ 
+ 	switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
+@@ -131,10 +328,26 @@ int ssb_sflash_init(struct ssb_chipcommo
+ 		return -ENOTSUPP;
+ 	}
+ 
+-	pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n",
+-		e->name, e->blocksize, e->numblocks);
+-
+-	pr_err("Serial flash support is not implemented yet!\n");
++	sflash->window = SSB_FLASH2;
++	sflash->blocksize = e->blocksize;
++	sflash->numblocks = e->numblocks;
++	sflash->size = sflash->blocksize * sflash->numblocks;
++	sflash->present = true;
++	sflash->poll = ssb_sflash_poll;
++	sflash->write = ssb_sflash_write;
++	sflash->erase = ssb_sflash_erase;
++	sflash->type = BCM47XX_SFLASH_SSB;
++	sflash->scc = cc;
++
++	pr_info("Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n",
++		  e->name, sflash->size / 1024, sflash->blocksize,
++		  sflash->numblocks);
++
++	/* Prepare platform device, but don't register it yet. It's too early,
++	 * malloc (required by device_private_init) is not available yet. */
++	ssb_sflash_dev.resource[0].end = ssb_sflash_dev.resource[0].start +
++					  sflash->size;
++	ssb_sflash_dev.dev.platform_data = sflash;
+ 
+-	return -ENOTSUPP;
++	return 0;
+ }
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -545,6 +545,15 @@ static int ssb_devices_register(struct s
+ 		dev_idx++;
+ 	}
+ 
++#ifdef CONFIG_SSB_SFLASH
++	if (bus->chipco.sflash.present) {
++		err = platform_device_register(&ssb_sflash_dev);
++		if (err)
++			ssb_printk(KERN_ERR PFX
++				   "Error registering serial flash\n");
++	}
++#endif
++
+ #ifdef CONFIG_SSB_DRIVER_MIPS
+ 	if (bus->mipscore.pflash.present) {
+ 		err = platform_device_register(&ssb_pflash_dev);
+--- a/drivers/ssb/ssb_private.h
++++ b/drivers/ssb/ssb_private.h
+@@ -231,6 +231,7 @@ extern u32 ssb_chipco_watchdog_timer_set
+ /* driver_chipcommon_sflash.c */
+ #ifdef CONFIG_SSB_SFLASH
+ int ssb_sflash_init(struct ssb_chipcommon *cc);
++extern struct platform_device ssb_sflash_dev;
+ #else
+ static inline int ssb_sflash_init(struct ssb_chipcommon *cc)
+ {
+--- a/include/linux/ssb/ssb_driver_chipcommon.h
++++ b/include/linux/ssb/ssb_driver_chipcommon.h
+@@ -13,6 +13,8 @@
+  * Licensed under the GPL version 2. See COPYING for details.
+  */
+ 
++#include <linux/mtd/bcm47xxsflash.h>
++
+ /** ChipCommon core registers. **/
+ 
+ #define SSB_CHIPCO_CHIPID		0x0000
+@@ -121,6 +123,17 @@
+ #define  SSB_CHIPCO_FLASHCTL_BUSY	SSB_CHIPCO_FLASHCTL_START
+ #define SSB_CHIPCO_FLASHADDR		0x0044
+ #define SSB_CHIPCO_FLASHDATA		0x0048
++/* Status register bits for ST flashes */
++#define  SSB_CHIPCO_FLASHDATA_ST_WIP	0x01		/* Write In Progress */
++#define  SSB_CHIPCO_FLASHDATA_ST_WEL	0x02		/* Write Enable Latch */
++#define  SSB_CHIPCO_FLASHDATA_ST_BP_MASK	0x1c		/* Block Protect */
++#define  SSB_CHIPCO_FLASHDATA_ST_BP_SHIFT	2
++#define  SSB_CHIPCO_FLASHDATA_ST_SRWD	0x80		/* Status Register Write Disable */
++/* Status register bits for Atmel flashes */
++#define  SSB_CHIPCO_FLASHDATA_AT_READY	0x80
++#define  SSB_CHIPCO_FLASHDATA_AT_MISMATCH	0x40
++#define  SSB_CHIPCO_FLASHDATA_AT_ID_MASK	0x38
++#define  SSB_CHIPCO_FLASHDATA_AT_ID_SHIFT	3
+ #define SSB_CHIPCO_BCAST_ADDR		0x0050
+ #define SSB_CHIPCO_BCAST_DATA		0x0054
+ #define SSB_CHIPCO_GPIOPULLUP		0x0058		/* Rev >= 20 only */
+@@ -504,7 +517,7 @@
+ #define SSB_CHIPCO_FLASHCTL_ST_PP	0x0302		/* Page Program */
+ #define SSB_CHIPCO_FLASHCTL_ST_SE	0x02D8		/* Sector Erase */
+ #define SSB_CHIPCO_FLASHCTL_ST_BE	0x00C7		/* Bulk Erase */
+-#define SSB_CHIPCO_FLASHCTL_ST_DP	0x00B9		/* Deep Power-down */
++#define SSB_CHIPCO_FLASHCTL_ST_DP	0x00D9		/* Deep Power-down */
+ #define SSB_CHIPCO_FLASHCTL_ST_RES	0x03AB		/* Read Electronic Signature */
+ #define SSB_CHIPCO_FLASHCTL_ST_CSA	0x1000		/* Keep chip select asserted */
+ #define SSB_CHIPCO_FLASHCTL_ST_SSE	0x0220		/* Sub-sector Erase */
+@@ -595,6 +608,9 @@ struct ssb_chipcommon {
+ 	struct ssb_chipcommon_pmu pmu;
+ 	u32 ticks_per_ms;
+ 	u32 max_timer_ms;
++#ifdef CONFIG_SSB_SFLASH
++	struct bcm47xxsflash sflash;
++#endif
+ };
+ 
+ static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
diff --git a/target/linux/brcm47xx/patches-3.9/070-bcma-add-functions-to-write-to-serial-flash.patch b/target/linux/brcm47xx/patches-3.9/070-bcma-add-functions-to-write-to-serial-flash.patch
new file mode 100644
index 0000000000..3a06b52d35
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/070-bcma-add-functions-to-write-to-serial-flash.patch
@@ -0,0 +1,300 @@
+--- a/drivers/bcma/driver_chipcommon_sflash.c
++++ b/drivers/bcma/driver_chipcommon_sflash.c
+@@ -1,6 +1,9 @@
+ /*
+  * Broadcom specific AMBA
+  * ChipCommon serial flash interface
++ * Copyright 2011, Jonas Gorski <jonas.gorski@gmail.com>
++ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de>
++ * Copyright 2010, Broadcom Corporation
+  *
+  * Licensed under the GNU/GPL. See COPYING for details.
+  */
+@@ -8,7 +11,11 @@
+ #include "bcma_private.h"
+ 
+ #include <linux/platform_device.h>
++#include <linux/delay.h>
+ #include <linux/bcma/bcma.h>
++#include <linux/bcma/bcma_driver_chipcommon.h>
++
++#define NUM_RETRIES	3
+ 
+ static struct resource bcma_sflash_resource = {
+ 	.name	= "bcma_sflash",
+@@ -18,7 +25,7 @@ static struct resource bcma_sflash_resou
+ };
+ 
+ struct platform_device bcma_sflash_dev = {
+-	.name		= "bcma_sflash",
++	.name		= "bcm47xx-sflash",
+ 	.resource	= &bcma_sflash_resource,
+ 	.num_resources	= 1,
+ };
+@@ -30,7 +37,7 @@ struct bcma_sflash_tbl_e {
+ 	u16 numblocks;
+ };
+ 
+-static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
+ 	{ "M25P20", 0x11, 0x10000, 4, },
+ 	{ "M25P40", 0x12, 0x10000, 8, },
+ 
+@@ -41,7 +48,7 @@ static struct bcma_sflash_tbl_e bcma_sfl
+ 	{ 0 },
+ };
+ 
+-static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
+ 	{ "SST25WF512", 1, 0x1000, 16, },
+ 	{ "SST25VF512", 0x48, 0x1000, 16, },
+ 	{ "SST25WF010", 2, 0x1000, 32, },
+@@ -59,7 +66,7 @@ static struct bcma_sflash_tbl_e bcma_sfl
+ 	{ 0 },
+ };
+ 
+-static struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
+ 	{ "AT45DB011", 0xc, 256, 512, },
+ 	{ "AT45DB021", 0x14, 256, 1024, },
+ 	{ "AT45DB041", 0x1c, 256, 2048, },
+@@ -84,12 +91,186 @@ static void bcma_sflash_cmd(struct bcma_
+ 	bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n");
+ }
+ 
++static void bcma_sflash_write_u8(struct bcma_drv_cc *cc, u32 offset, u8 byte)
++{
++	bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset);
++	bcma_cc_write32(cc, BCMA_CC_FLASHDATA, byte);
++}
++
++/* Poll for command completion. Returns zero when complete. */
++static int bcma_sflash_poll(struct bcm47xxsflash *dev, u32 offset)
++{
++	struct bcma_drv_cc *cc = dev->bcc;
++
++	if (offset >= cc->sflash.size)
++		return -22;
++
++	switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
++	case BCMA_CC_FLASHT_STSER:
++		/* Check for ST Write In Progress bit */
++		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RDSR);
++		return bcma_cc_read32(cc, BCMA_CC_FLASHDATA)
++				& BCMA_CC_FLASHDATA_ST_WIP;
++	case BCMA_CC_FLASHT_ATSER:
++		/* Check for Atmel Ready bit */
++		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_STATUS);
++		return !(bcma_cc_read32(cc, BCMA_CC_FLASHDATA)
++				& BCMA_CC_FLASHDATA_AT_READY);
++	}
++
++	return 0;
++}
++
++static int sflash_st_write(struct bcm47xxsflash *dev, u32 offset, u32 len,
++			   const u8 *buf)
++{
++	int written = 1;
++	struct bcma_drv_cc *cc = dev->bcc;
++
++	/* Enable writes */
++	bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_WREN);
++	bcma_sflash_write_u8(cc, offset, *buf++);
++	/* Issue a page program with CSA bit set */
++	bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_CSA | BCMA_CC_FLASHCTL_ST_PP);
++	offset++;
++	len--;
++	while (len > 0) {
++		if ((offset & 255) == 0) {
++			/* Page boundary, poll droping cs and return */
++			bcma_cc_write32(cc, BCMA_CC_FLASHCTL, 0);
++			udelay(1);
++			if (!bcma_sflash_poll(dev, offset)) {
++				/* Flash rejected command */
++				return -EAGAIN;
++			}
++			return written;
++		} else {
++			/* Write single byte */
++			bcma_sflash_cmd(cc,
++					BCMA_CC_FLASHCTL_ST_CSA |
++					*buf++);
++		}
++		written++;
++		offset++;
++		len--;
++	}
++	/* All done, drop cs & poll */
++	bcma_cc_write32(cc, BCMA_CC_FLASHCTL, 0);
++	udelay(1);
++	if (!bcma_sflash_poll(dev, offset)) {
++		/* Flash rejected command */
++		return -EAGAIN;
++	}
++	return written;
++}
++
++static int sflash_at_write(struct bcm47xxsflash *dev, u32 offset, u32 len,
++			   const u8 *buf)
++{
++	struct bcma_drv_cc *cc = dev->bcc;
++	u32 page, byte, mask;
++	int ret = 0;
++
++	mask = dev->blocksize - 1;
++	page = (offset & ~mask) << 1;
++	byte = offset & mask;
++	/* Read main memory page into buffer 1 */
++	if (byte || (len < dev->blocksize)) {
++		int i = 100;
++		bcma_cc_write32(cc, BCMA_CC_FLASHADDR, page);
++		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_BUF1_LOAD);
++		/* 250 us for AT45DB321B */
++		while (i > 0 && bcma_sflash_poll(dev, offset)) {
++			udelay(10);
++			i--;
++		}
++		BUG_ON(!bcma_sflash_poll(dev, offset));
++	}
++	/* Write into buffer 1 */
++	for (ret = 0; (ret < (int)len) && (byte < dev->blocksize); ret++) {
++		bcma_sflash_write_u8(cc, byte++, *buf++);
++		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_BUF1_WRITE);
++	}
++	/* Write buffer 1 into main memory page */
++	bcma_cc_write32(cc, BCMA_CC_FLASHADDR, page);
++	bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM);
++
++	return ret;
++}
++
++/* Write len bytes starting at offset into buf. Returns number of bytes
++ * written. Caller should poll for completion.
++ */
++static int bcma_sflash_write(struct bcm47xxsflash *dev, u32 offset, u32 len,
++		      const u8 *buf)
++{
++	int ret = 0, tries = NUM_RETRIES;
++	struct bcma_drv_cc *cc = dev->bcc;
++
++	if (!len)
++		return 0;
++
++	if ((offset + len) > cc->sflash.size)
++		return -EINVAL;
++
++	switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
++	case BCMA_CC_FLASHT_STSER:
++		do {
++			ret = sflash_st_write(dev, offset, len, buf);
++			tries--;
++		} while (ret == -EAGAIN && tries > 0);
++
++		if (ret == -EAGAIN && tries == 0) {
++			bcma_info(cc->core->bus, "ST Flash rejected write\n");
++			ret = -EIO;
++		}
++		break;
++	case BCMA_CC_FLASHT_ATSER:
++		ret = sflash_at_write(dev, offset, len, buf);
++		break;
++	}
++
++	return ret;
++}
++
++/* Erase a region. Returns number of bytes scheduled for erasure.
++ * Caller should poll for completion.
++ */
++static int bcma_sflash_erase(struct bcm47xxsflash *dev, u32 offset)
++{
++	struct bcma_drv_cc *cc = dev->bcc;
++
++	if (offset >= cc->sflash.size)
++		return -EINVAL;
++
++	switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
++	case BCMA_CC_FLASHT_STSER:
++		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_WREN);
++		bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset);
++		/* Newer flashes have "sub-sectors" which can be erased independently
++		 * with a new command: ST_SSE. The ST_SE command erases 64KB just as
++		 * before.
++		 */
++		if (dev->blocksize < (64 * 1024))
++			bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_SSE);
++		else
++			bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_SE);
++		return dev->blocksize;
++	case BCMA_CC_FLASHT_ATSER:
++		bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset << 1);
++		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_PAGE_ERASE);
++		return dev->blocksize;
++	}
++
++	return 0;
++}
++
+ /* Initialize serial flash access */
+ int bcma_sflash_init(struct bcma_drv_cc *cc)
+ {
+ 	struct bcma_bus *bus = cc->core->bus;
+-	struct bcma_sflash *sflash = &cc->sflash;
+-	struct bcma_sflash_tbl_e *e;
++	struct bcm47xxsflash *sflash = &cc->sflash;
++	const struct bcma_sflash_tbl_e *e;
+ 	u32 id, id2;
+ 
+ 	switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
+@@ -150,6 +331,11 @@ int bcma_sflash_init(struct bcma_drv_cc
+ 	sflash->numblocks = e->numblocks;
+ 	sflash->size = sflash->blocksize * sflash->numblocks;
+ 	sflash->present = true;
++	sflash->poll = bcma_sflash_poll;
++	sflash->write = bcma_sflash_write;
++	sflash->erase = bcma_sflash_erase;
++	sflash->type = BCM47XX_SFLASH_BCMA;
++	sflash->bcc = cc;
+ 
+ 	bcma_info(bus, "Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n",
+ 		  e->name, sflash->size / 1024, sflash->blocksize,
+--- a/include/linux/bcma/bcma_driver_chipcommon.h
++++ b/include/linux/bcma/bcma_driver_chipcommon.h
+@@ -3,6 +3,7 @@
+ 
+ #include <linux/platform_device.h>
+ #include <linux/gpio.h>
++#include <linux/mtd/bcm47xxsflash.h>
+ 
+ /** ChipCommon core registers. **/
+ #define BCMA_CC_ID			0x0000
+@@ -523,19 +524,6 @@ struct bcma_pflash {
+ 	u32 window_size;
+ };
+ 
+-#ifdef CONFIG_BCMA_SFLASH
+-struct bcma_sflash {
+-	bool present;
+-	u32 window;
+-	u32 blocksize;
+-	u16 numblocks;
+-	u32 size;
+-
+-	struct mtd_info *mtd;
+-	void *priv;
+-};
+-#endif
+-
+ #ifdef CONFIG_BCMA_NFLASH
+ struct mtd_info;
+ 
+@@ -569,7 +557,7 @@ struct bcma_drv_cc {
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
+ 	struct bcma_pflash pflash;
+ #ifdef CONFIG_BCMA_SFLASH
+-	struct bcma_sflash sflash;
++	struct bcm47xxsflash sflash;
+ #endif
+ #ifdef CONFIG_BCMA_NFLASH
+ 	struct bcma_nflash nflash;
diff --git a/target/linux/brcm47xx/patches-3.9/114-MIPS-BCM47xx-Setup-and-register-serial-early.patch b/target/linux/brcm47xx/patches-3.9/114-MIPS-BCM47xx-Setup-and-register-serial-early.patch
new file mode 100644
index 0000000000..5e324e473b
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/114-MIPS-BCM47xx-Setup-and-register-serial-early.patch
@@ -0,0 +1,69 @@
+From 9be402f069cc259ad5795b77567d66c4e7f6bef6 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 18 Jul 2010 14:59:24 +0200
+Subject: [PATCH 4/6] MIPS: BCM47xx: Setup and register serial early
+
+Swap the first and second serial if console=ttyS1 was set.
+Set it up and register it for early serial support.
+
+This patch has been in OpenWRT for a long time.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/bcm47xx/setup.c |   39 ++++++++++++++++++++++++++++++++++++++-
+ 1 files changed, 38 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -31,6 +31,8 @@
+ #include <linux/ssb/ssb.h>
+ #include <linux/ssb/ssb_embedded.h>
+ #include <linux/bcma/bcma_soc.h>
++#include <linux/serial.h>
++#include <linux/serial_8250.h>
+ #include <asm/bootinfo.h>
+ #include <asm/reboot.h>
+ #include <asm/time.h>
+@@ -121,6 +123,31 @@ static int bcm47xx_get_invariants(struct
+ 	return 0;
+ }
+ 
++#ifdef CONFIG_SERIAL_8250
++static void __init bcm47xx_early_serial_setup(struct ssb_mipscore *mcore)
++{
++	int i;
++
++	for (i = 0; i < mcore->nr_serial_ports; i++) {
++		struct ssb_serial_port *port = &(mcore->serial_ports[i]);
++		struct uart_port s;
++
++		memset(&s, 0, sizeof(s));
++		s.line = i;
++		s.mapbase = (unsigned int) port->regs;
++		s.membase = port->regs;
++		s.irq = port->irq + 2;
++		s.uartclk = port->baud_base;
++		s.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
++		s.iotype = SERIAL_IO_MEM;
++		s.regshift = port->reg_shift;
++
++		early_serial_setup(&s);
++	}
++	printk(KERN_DEBUG "Serial init done.\n");
++}
++#endif
++
+ static void __init bcm47xx_register_ssb(void)
+ {
+ 	int err;
+@@ -150,6 +177,10 @@ static void __init bcm47xx_register_ssb(
+ 			memcpy(&mcore->serial_ports[1], &port, sizeof(port));
+ 		}
+ 	}
++
++#ifdef CONFIG_SERIAL_8250
++	bcm47xx_early_serial_setup(mcore);
++#endif
+ }
+ #endif
+ 
diff --git a/target/linux/brcm47xx/patches-3.9/116-MIPS-BCM47xx-Remove-CFE-console.patch b/target/linux/brcm47xx/patches-3.9/116-MIPS-BCM47xx-Remove-CFE-console.patch
new file mode 100644
index 0000000000..1db01f0cbb
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/116-MIPS-BCM47xx-Remove-CFE-console.patch
@@ -0,0 +1,141 @@
+From 5219981646071abb6731634bf47781a53e248764 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 18 Jul 2010 15:11:26 +0200
+Subject: [PATCH 6/6] MIPS: BCM47xx: Remove CFE console
+
+Do not use the CFE console. It causes hangs on some devices like the
+Buffalo WHR-HP-G54.
+This was reported in https://dev.openwrt.org/ticket/4061 and
+https://forum.openwrt.org/viewtopic.php?id=17063
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/Kconfig        |    1 -
+ arch/mips/bcm47xx/prom.c |   82 +++------------------------------------------
+ 2 files changed, 6 insertions(+), 77 deletions(-)
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -118,7 +118,6 @@ config BCM47XX
+ 	select NO_EXCEPT_FILL
+ 	select SYS_SUPPORTS_32BIT_KERNEL
+ 	select SYS_SUPPORTS_LITTLE_ENDIAN
+-	select SYS_HAS_EARLY_PRINTK
+ 	help
+ 	 Support for BCM47XX based boards
+ 
+--- a/arch/mips/bcm47xx/prom.c
++++ b/arch/mips/bcm47xx/prom.c
+@@ -33,96 +33,28 @@
+ #include <asm/fw/cfe/cfe_api.h>
+ #include <asm/fw/cfe/cfe_error.h>
+ 
+-static int cfe_cons_handle;
+-
+ const char *get_system_type(void)
+ {
+ 	return "Broadcom BCM47XX";
+ }
+ 
+-void prom_putchar(char c)
+-{
+-	while (cfe_write(cfe_cons_handle, &c, 1) == 0)
+-		;
+-}
+-
+-static __init void prom_init_cfe(void)
++static __init int prom_init_cfe(void)
+ {
+ 	uint32_t cfe_ept;
+ 	uint32_t cfe_handle;
+ 	uint32_t cfe_eptseal;
+-	int argc = fw_arg0;
+-	char **envp = (char **) fw_arg2;
+-	int *prom_vec = (int *) fw_arg3;
+-
+-	/*
+-	 * Check if a loader was used; if NOT, the 4 arguments are
+-	 * what CFE gives us (handle, 0, EPT and EPTSEAL)
+-	 */
+-	if (argc < 0) {
+-		cfe_handle = (uint32_t)argc;
+-		cfe_ept = (uint32_t)envp;
+-		cfe_eptseal = (uint32_t)prom_vec;
+-	} else {
+-		if ((int)prom_vec < 0) {
+-			/*
+-			 * Old loader; all it gives us is the handle,
+-			 * so use the "known" entrypoint and assume
+-			 * the seal.
+-			 */
+-			cfe_handle = (uint32_t)prom_vec;
+-			cfe_ept = 0xBFC00500;
+-			cfe_eptseal = CFE_EPTSEAL;
+-		} else {
+-			/*
+-			 * Newer loaders bundle the handle/ept/eptseal
+-			 * Note: prom_vec is in the loader's useg
+-			 * which is still alive in the TLB.
+-			 */
+-			cfe_handle = prom_vec[0];
+-			cfe_ept = prom_vec[2];
+-			cfe_eptseal = prom_vec[3];
+-		}
+-	}
++
++	cfe_eptseal = (uint32_t) fw_arg3;
++	cfe_handle = (uint32_t) fw_arg0;
++	cfe_ept = (uint32_t) fw_arg2;
+ 
+ 	if (cfe_eptseal != CFE_EPTSEAL) {
+-		/* too early for panic to do any good */
+ 		printk(KERN_ERR "CFE's entrypoint seal doesn't match.");
+-		while (1) ;
++		return -1;
+ 	}
+ 
+ 	cfe_init(cfe_handle, cfe_ept);
+-}
+-
+-static __init void prom_init_console(void)
+-{
+-	/* Initialize CFE console */
+-	cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
+-}
+-
+-static __init void prom_init_cmdline(void)
+-{
+-	static char buf[COMMAND_LINE_SIZE] __initdata;
+-
+-	/* Get the kernel command line from CFE */
+-	if (cfe_getenv("LINUX_CMDLINE", buf, COMMAND_LINE_SIZE) >= 0) {
+-		buf[COMMAND_LINE_SIZE - 1] = 0;
+-		strcpy(arcs_cmdline, buf);
+-	}
+-
+-	/* Force a console handover by adding a console= argument if needed,
+-	 * as CFE is not available anymore later in the boot process. */
+-	if ((strstr(arcs_cmdline, "console=")) == NULL) {
+-		/* Try to read the default serial port used by CFE */
+-		if ((cfe_getenv("BOOT_CONSOLE", buf, COMMAND_LINE_SIZE) < 0)
+-		    || (strncmp("uart", buf, 4)))
+-			/* Default to uart0 */
+-			strcpy(buf, "uart0");
+-
+-		/* Compute the new command line */
+-		snprintf(arcs_cmdline, COMMAND_LINE_SIZE, "%s console=ttyS%c,115200",
+-			 arcs_cmdline, buf[4]);
+-	}
++	return 0;
+ }
+ 
+ static __init void prom_init_mem(void)
+@@ -173,8 +105,6 @@ static __init void prom_init_mem(void)
+ void __init prom_init(void)
+ {
+ 	prom_init_cfe();
+-	prom_init_console();
+-	prom_init_cmdline();
+ 	prom_init_mem();
+ }
+ 
diff --git a/target/linux/brcm47xx/patches-3.9/150-cpu_fixes.patch b/target/linux/brcm47xx/patches-3.9/150-cpu_fixes.patch
new file mode 100644
index 0000000000..a2100ffe34
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/150-cpu_fixes.patch
@@ -0,0 +1,368 @@
+--- a/arch/mips/include/asm/r4kcache.h
++++ b/arch/mips/include/asm/r4kcache.h
+@@ -17,6 +17,20 @@
+ #include <asm/cpu-features.h>
+ #include <asm/mipsmtregs.h>
+ 
++#ifdef CONFIG_BCM47XX
++#include <asm/paccess.h>
++#include <linux/ssb/ssb.h>
++#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE)))
++
++#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
++#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
++#else
++#define BCM4710_DUMMY_RREG()
++
++#define BCM4710_FILL_TLB(addr)
++#define BCM4710_PROTECTED_FILL_TLB(addr)
++#endif
++
+ /*
+  * This macro return a properly sign-extended address suitable as base address
+  * for indexed cache operations.  Two issues here:
+@@ -150,6 +164,7 @@ static inline void flush_icache_line_ind
+ static inline void flush_dcache_line_indexed(unsigned long addr)
+ {
+ 	__dflush_prologue
++	BCM4710_DUMMY_RREG();
+ 	cache_op(Index_Writeback_Inv_D, addr);
+ 	__dflush_epilogue
+ }
+@@ -169,6 +184,7 @@ static inline void flush_icache_line(uns
+ static inline void flush_dcache_line(unsigned long addr)
+ {
+ 	__dflush_prologue
++	BCM4710_DUMMY_RREG();
+ 	cache_op(Hit_Writeback_Inv_D, addr);
+ 	__dflush_epilogue
+ }
+@@ -176,6 +192,7 @@ static inline void flush_dcache_line(uns
+ static inline void invalidate_dcache_line(unsigned long addr)
+ {
+ 	__dflush_prologue
++	BCM4710_DUMMY_RREG();
+ 	cache_op(Hit_Invalidate_D, addr);
+ 	__dflush_epilogue
+ }
+@@ -208,6 +225,7 @@ static inline void flush_scache_line(uns
+  */
+ static inline void protected_flush_icache_line(unsigned long addr)
+ {
++	BCM4710_DUMMY_RREG();
+ 	protected_cache_op(Hit_Invalidate_I, addr);
+ }
+ 
+@@ -219,6 +237,7 @@ static inline void protected_flush_icach
+  */
+ static inline void protected_writeback_dcache_line(unsigned long addr)
+ {
++	BCM4710_DUMMY_RREG();
+ 	protected_cache_op(Hit_Writeback_Inv_D, addr);
+ }
+ 
+@@ -339,8 +358,52 @@ static inline void invalidate_tcache_pag
+ 		: "r" (base),						\
+ 		  "i" (op));
+ 
++static inline void blast_dcache(void)
++{
++	unsigned long start = KSEG0;
++	unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways;
++	unsigned long end = (start + dcache_size);
++
++	do {
++		BCM4710_DUMMY_RREG();
++		cache_op(Index_Writeback_Inv_D, start);
++		start += current_cpu_data.dcache.linesz;
++	} while(start < end);
++}
++
++static inline void blast_dcache_page(unsigned long page)
++{
++	unsigned long start = page;
++	unsigned long end = start + PAGE_SIZE;
++
++	BCM4710_FILL_TLB(start);
++	do {
++		BCM4710_DUMMY_RREG();
++		cache_op(Hit_Writeback_Inv_D, start);
++		start += current_cpu_data.dcache.linesz;
++	} while(start < end);
++}
++
++static inline void blast_dcache_page_indexed(unsigned long page)
++{
++	unsigned long start = page;
++	unsigned long end = start + PAGE_SIZE;
++	unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
++	unsigned long ws_end = current_cpu_data.dcache.ways <<
++	                       current_cpu_data.dcache.waybit;
++	unsigned long ws, addr;
++	for (ws = 0; ws < ws_end; ws += ws_inc) {
++		start = page + ws;
++		for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) {
++			BCM4710_DUMMY_RREG();
++			cache_op(Index_Writeback_Inv_D, addr);
++		}
++	}
++}
++
++
+ /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
+-#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize) \
++#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, war) \
+ static inline void blast_##pfx##cache##lsize(void)			\
+ {									\
+ 	unsigned long start = INDEX_BASE;				\
+@@ -352,6 +415,7 @@ static inline void blast_##pfx##cache##l
+ 									\
+ 	__##pfx##flush_prologue						\
+ 									\
++	war								\
+ 	for (ws = 0; ws < ws_end; ws += ws_inc)				\
+ 		for (addr = start; addr < end; addr += lsize * 32)	\
+ 			cache##lsize##_unroll32(addr|ws, indexop);	\
+@@ -366,6 +430,7 @@ static inline void blast_##pfx##cache##l
+ 									\
+ 	__##pfx##flush_prologue						\
+ 									\
++	war								\
+ 	do {								\
+ 		cache##lsize##_unroll32(start, hitop);			\
+ 		start += lsize * 32;					\
+@@ -384,6 +449,8 @@ static inline void blast_##pfx##cache##l
+ 			       current_cpu_data.desc.waybit;		\
+ 	unsigned long ws, addr;						\
+ 									\
++	war								\
++									\
+ 	__##pfx##flush_prologue						\
+ 									\
+ 	for (ws = 0; ws < ws_end; ws += ws_inc)				\
+@@ -393,36 +460,38 @@ static inline void blast_##pfx##cache##l
+ 	__##pfx##flush_epilogue						\
+ }
+ 
+-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16)
+-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16)
+-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16)
+-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32)
+-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32)
+-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32)
+-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64)
+-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
+-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64)
+-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128)
+-
+-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16)
+-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32)
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16)
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32)
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64)
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128)
++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, )
++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, BCM4710_FILL_TLB(start);)
++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, )
++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, )
++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, BCM4710_FILL_TLB(start);)
++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, )
++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, )
++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, BCM4710_FILL_TLB(start);)
++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
++
++__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, )
++__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, )
+ 
+ /* build blast_xxx_range, protected_blast_xxx_range */
+-#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \
++#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, war, war2) \
+ static inline void prot##blast_##pfx##cache##_range(unsigned long start, \
+ 						    unsigned long end)	\
+ {									\
+ 	unsigned long lsize = cpu_##desc##_line_size();			\
+ 	unsigned long addr = start & ~(lsize - 1);			\
+ 	unsigned long aend = (end - 1) & ~(lsize - 1);			\
++	war								\
+ 									\
+ 	__##pfx##flush_prologue						\
+ 									\
+ 	while (1) {							\
++		war2						\
+ 		prot##cache_op(hitop, addr);				\
+ 		if (addr == aend)					\
+ 			break;						\
+@@ -432,13 +501,13 @@ static inline void prot##blast_##pfx##ca
+ 	__##pfx##flush_epilogue						\
+ }
+ 
+-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_)
+-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_)
+-__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_)
+-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, )
+-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, )
++__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
++__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_,, )
++__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_,, )
++__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D,, BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
++__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD,,, )
+ /* blast_inv_dcache_range */
+-__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, )
+-__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, )
++__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D,,,BCM4710_DUMMY_RREG();)
++__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD,,, )
+ 
+ #endif /* _ASM_R4KCACHE_H */
+--- a/arch/mips/include/asm/stackframe.h
++++ b/arch/mips/include/asm/stackframe.h
+@@ -449,6 +449,10 @@
+ 		.macro	RESTORE_SP_AND_RET
+ 		LONG_L	sp, PT_R29(sp)
+ 		.set	mips3
++#ifdef CONFIG_BCM47XX
++		nop
++		nop
++#endif
+ 		eret
+ 		.set	mips0
+ 		.endm
+--- a/arch/mips/kernel/genex.S
++++ b/arch/mips/kernel/genex.S
+@@ -51,6 +51,10 @@ NESTED(except_vec1_generic, 0, sp)
+ NESTED(except_vec3_generic, 0, sp)
+ 	.set	push
+ 	.set	noat
++#ifdef CONFIG_BCM47XX
++	nop
++	nop
++#endif
+ #if R5432_CP0_INTERRUPT_WAR
+ 	mfc0	k0, CP0_INDEX
+ #endif
+--- a/arch/mips/mm/c-r4k.c
++++ b/arch/mips/mm/c-r4k.c
+@@ -34,6 +34,9 @@
+ #include <asm/cacheflush.h> /* for run_uncached() */
+ #include <asm/traps.h>
+ 
++/* For enabling BCM4710 cache workarounds */
++int bcm4710 = 0;
++
+ /*
+  * Special Variant of smp_call_function for use by cache functions:
+  *
+@@ -110,6 +113,9 @@ static void __cpuinit r4k_blast_dcache_p
+ {
+ 	unsigned long  dc_lsize = cpu_dcache_line_size();
+ 
++	if (bcm4710)
++		r4k_blast_dcache_page = blast_dcache_page;
++	else
+ 	if (dc_lsize == 0)
+ 		r4k_blast_dcache_page = (void *)cache_noop;
+ 	else if (dc_lsize == 16)
+@@ -126,6 +132,9 @@ static void __cpuinit r4k_blast_dcache_p
+ {
+ 	unsigned long dc_lsize = cpu_dcache_line_size();
+ 
++	if (bcm4710)
++		r4k_blast_dcache_page_indexed = blast_dcache_page_indexed;
++	else
+ 	if (dc_lsize == 0)
+ 		r4k_blast_dcache_page_indexed = (void *)cache_noop;
+ 	else if (dc_lsize == 16)
+@@ -142,6 +151,9 @@ static void __cpuinit r4k_blast_dcache_s
+ {
+ 	unsigned long dc_lsize = cpu_dcache_line_size();
+ 
++	if (bcm4710)
++		r4k_blast_dcache = blast_dcache;
++	else
+ 	if (dc_lsize == 0)
+ 		r4k_blast_dcache = (void *)cache_noop;
+ 	else if (dc_lsize == 16)
+@@ -671,6 +683,8 @@ static void local_r4k_flush_cache_sigtra
+ 	unsigned long addr = (unsigned long) arg;
+ 
+ 	R4600_HIT_CACHEOP_WAR_IMPL;
++	BCM4710_PROTECTED_FILL_TLB(addr);
++	BCM4710_PROTECTED_FILL_TLB(addr + 4);
+ 	if (dc_lsize)
+ 		protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
+ 	if (!cpu_icache_snoops_remote_store && scache_size)
+@@ -1354,6 +1368,17 @@ static void __cpuinit coherency_setup(vo
+ 	 * silly idea of putting something else there ...
+ 	 */
+ 	switch (current_cpu_type()) {
++	case CPU_BMIPS3300:
++		{
++			u32 cm;
++			cm = read_c0_diag();
++			/* Enable icache */
++			cm |= (1 << 31);
++			/* Enable dcache */
++			cm |= (1 << 30);
++			write_c0_diag(cm);
++		}
++		break;
+ 	case CPU_R4000PC:
+ 	case CPU_R4000SC:
+ 	case CPU_R4000MC:
+@@ -1415,6 +1440,15 @@ void __cpuinit r4k_cache_init(void)
+ 	extern void build_copy_page(void);
+ 	struct cpuinfo_mips *c = &current_cpu_data;
+ 
++	/* Check if special workarounds are required */
++#ifdef CONFIG_BCM47XX
++	if (current_cpu_data.cputype == CPU_BMIPS32 && (current_cpu_data.processor_id & 0xff) == 0) {
++		printk("Enabling BCM4710A0 cache workarounds.\n");
++		bcm4710 = 1;
++	} else
++#endif
++		bcm4710 = 0;
++
+ 	probe_pcache();
+ 	setup_scache();
+ 
+@@ -1475,6 +1509,14 @@ void __cpuinit r4k_cache_init(void)
+ #if !defined(CONFIG_MIPS_CMP)
+ 	local_r4k___flush_cache_all(NULL);
+ #endif
++#ifdef CONFIG_BCM47XX
++	{
++		static void (*_coherency_setup)(void);
++		_coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup);
++		_coherency_setup();
++	}
++#else
+ 	coherency_setup();
++#endif
+ 	board_cache_error_setup = r4k_cache_error_setup;
+ }
+--- a/arch/mips/mm/tlbex.c
++++ b/arch/mips/mm/tlbex.c
+@@ -1315,6 +1315,9 @@ static void __cpuinit build_r4000_tlb_re
+ 			/* No need for uasm_i_nop */
+ 		}
+ 
++#ifdef CONFIG_BCM47XX
++		uasm_i_nop(&p);
++#endif
+ #ifdef CONFIG_64BIT
+ 		build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
+ #else
+@@ -1846,6 +1849,9 @@ build_r4000_tlbchange_handler_head(u32 *
+ {
+ 	struct work_registers wr = build_get_work_registers(p);
+ 
++#ifdef CONFIG_BCM47XX
++	uasm_i_nop(p);
++#endif
+ #ifdef CONFIG_64BIT
+ 	build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */
+ #else
diff --git a/target/linux/brcm47xx/patches-3.9/160-kmap_coherent.patch b/target/linux/brcm47xx/patches-3.9/160-kmap_coherent.patch
new file mode 100644
index 0000000000..89503b19ef
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/160-kmap_coherent.patch
@@ -0,0 +1,77 @@
+--- a/arch/mips/include/asm/cpu-features.h
++++ b/arch/mips/include/asm/cpu-features.h
+@@ -113,6 +113,9 @@
+ #ifndef cpu_has_pindexed_dcache
+ #define cpu_has_pindexed_dcache (cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX)
+ #endif
++#ifndef cpu_use_kmap_coherent
++#define cpu_use_kmap_coherent 1
++#endif
+ 
+ /*
+  * I-Cache snoops remote store.	 This only matters on SMP.  Some multiprocessors
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
+@@ -0,0 +1,13 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
++ */
++#ifndef __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
++#define __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
++
++#define cpu_use_kmap_coherent	0
++
++#endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */
+--- a/arch/mips/mm/c-r4k.c
++++ b/arch/mips/mm/c-r4k.c
+@@ -506,7 +506,7 @@ static inline void local_r4k_flush_cache
+ 		 */
+ 		map_coherent = (cpu_has_dc_aliases &&
+ 				page_mapped(page) && !Page_dcache_dirty(page));
+-		if (map_coherent)
++		if (map_coherent && cpu_use_kmap_coherent)
+ 			vaddr = kmap_coherent(page, addr);
+ 		else
+ 			vaddr = kmap_atomic(page);
+@@ -529,7 +529,7 @@ static inline void local_r4k_flush_cache
+ 	}
+ 
+ 	if (vaddr) {
+-		if (map_coherent)
++		if (map_coherent && cpu_use_kmap_coherent)
+ 			kunmap_coherent();
+ 		else
+ 			kunmap_atomic(vaddr);
+--- a/arch/mips/mm/init.c
++++ b/arch/mips/mm/init.c
+@@ -208,7 +208,7 @@ void copy_user_highpage(struct page *to,
+ 	void *vfrom, *vto;
+ 
+ 	vto = kmap_atomic(to);
+-	if (cpu_has_dc_aliases &&
++	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+ 	    page_mapped(from) && !Page_dcache_dirty(from)) {
+ 		vfrom = kmap_coherent(from, vaddr);
+ 		copy_page(vto, vfrom);
+@@ -230,7 +230,7 @@ void copy_to_user_page(struct vm_area_st
+ 	struct page *page, unsigned long vaddr, void *dst, const void *src,
+ 	unsigned long len)
+ {
+-	if (cpu_has_dc_aliases &&
++	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+ 	    page_mapped(page) && !Page_dcache_dirty(page)) {
+ 		void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
+ 		memcpy(vto, src, len);
+@@ -248,7 +248,7 @@ void copy_from_user_page(struct vm_area_
+ 	struct page *page, unsigned long vaddr, void *dst, const void *src,
+ 	unsigned long len)
+ {
+-	if (cpu_has_dc_aliases &&
++	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+ 	    page_mapped(page) && !Page_dcache_dirty(page)) {
+ 		void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
+ 		memcpy(dst, vfrom, len);
diff --git a/target/linux/brcm47xx/patches-3.9/170-fix-74k-cpu.patch b/target/linux/brcm47xx/patches-3.9/170-fix-74k-cpu.patch
new file mode 100644
index 0000000000..34a1d27f67
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/170-fix-74k-cpu.patch
@@ -0,0 +1,12 @@
+--- a/arch/mips/kernel/cpu-probe.c
++++ b/arch/mips/kernel/cpu-probe.c
+@@ -211,9 +211,6 @@ void __init check_wait(void)
+ 		break;
+ 
+ 	case CPU_74K:
+-		cpu_wait = r4k_wait;
+-		if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0))
+-			cpu_wait = r4k_wait_irqoff;
+ 		break;
+ 
+ 	case CPU_TX49XX:
diff --git a/target/linux/brcm47xx/patches-3.9/210-b44_phy_fix.patch b/target/linux/brcm47xx/patches-3.9/210-b44_phy_fix.patch
new file mode 100644
index 0000000000..8cf4b0f00c
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/210-b44_phy_fix.patch
@@ -0,0 +1,54 @@
+--- a/drivers/net/ethernet/broadcom/b44.c
++++ b/drivers/net/ethernet/broadcom/b44.c
+@@ -410,10 +410,34 @@ static void b44_wap54g10_workaround(stru
+ error:
+ 	pr_warning("PHY: cannot reset MII transceiver isolate bit\n");
+ }
++
++static void b44_bcm47xx_workarounds(struct b44 *bp)
++{
++	char buf[20];
++	struct ssb_device *sdev = bp->sdev;
++
++	/* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */
++	if (sdev->bus->sprom.board_num == 100) {
++		bp->phy_addr = B44_PHY_ADDR_NO_PHY;
++	} else {
++		/* WL-HDD */
++		if (bcm47xx_nvram_getenv("hardware_version", buf, sizeof(buf)) >= 0 &&
++		    !strncmp(buf, "WL300-", strlen("WL300-"))) {
++			if (sdev->bus->sprom.et0phyaddr == 0 &&
++			    sdev->bus->sprom.et1phyaddr == 1)
++				bp->phy_addr = B44_PHY_ADDR_NO_PHY;
++		}
++	}
++	return;
++}
+ #else
+ static inline void b44_wap54g10_workaround(struct b44 *bp)
+ {
+ }
++
++static inline void b44_bcm47xx_workarounds(struct b44 *bp)
++{
++}
+ #endif
+ 
+ static int b44_setup_phy(struct b44 *bp)
+@@ -422,6 +446,7 @@ static int b44_setup_phy(struct b44 *bp)
+ 	int err;
+ 
+ 	b44_wap54g10_workaround(bp);
++	b44_bcm47xx_workarounds(bp);
+ 
+ 	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
+ 		return 0;
+@@ -2101,6 +2126,8 @@ static int b44_get_invariants(struct b44
+ 	 * valid PHY address. */
+ 	bp->phy_addr &= 0x1F;
+ 
++	b44_bcm47xx_workarounds(bp);
++
+ 	memcpy(bp->dev->dev_addr, addr, 6);
+ 
+ 	if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
diff --git a/target/linux/brcm47xx/patches-3.9/211-b44_timeout_spam.patch b/target/linux/brcm47xx/patches-3.9/211-b44_timeout_spam.patch
new file mode 100644
index 0000000000..c2eb3ad90b
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/211-b44_timeout_spam.patch
@@ -0,0 +1,15 @@
+--- a/drivers/net/ethernet/broadcom/b44.c
++++ b/drivers/net/ethernet/broadcom/b44.c
+@@ -187,10 +187,11 @@ static int b44_wait_bit(struct b44 *bp,
+ 		udelay(10);
+ 	}
+ 	if (i == timeout) {
++#if 0
+ 		if (net_ratelimit())
+ 			netdev_err(bp->dev, "BUG!  Timeout waiting for bit %08x of register %lx to %s\n",
+ 				   bit, reg, clear ? "clear" : "set");
+-
++#endif
+ 		return -ENODEV;
+ 	}
+ 	return 0;
diff --git a/target/linux/brcm47xx/patches-3.9/241-bcma-broadcom-2011-sdk-updates.patch b/target/linux/brcm47xx/patches-3.9/241-bcma-broadcom-2011-sdk-updates.patch
new file mode 100644
index 0000000000..72b02088c6
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/241-bcma-broadcom-2011-sdk-updates.patch
@@ -0,0 +1,10 @@
+--- a/drivers/bcma/core.c
++++ b/drivers/bcma/core.c
+@@ -43,6 +43,7 @@ int bcma_core_enable(struct bcma_device
+ 	bcma_aread32(core, BCMA_IOCTL);
+ 
+ 	bcma_awrite32(core, BCMA_RESET_CTL, 0);
++	bcma_aread32(core, BCMA_RESET_CTL);
+ 	udelay(1);
+ 
+ 	bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags));
diff --git a/target/linux/brcm47xx/patches-3.9/260-MIPS-BCM47XX-add-board-detection.patch b/target/linux/brcm47xx/patches-3.9/260-MIPS-BCM47XX-add-board-detection.patch
new file mode 100644
index 0000000000..cef3d527ed
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/260-MIPS-BCM47XX-add-board-detection.patch
@@ -0,0 +1,328 @@
+--- a/arch/mips/bcm47xx/Makefile
++++ b/arch/mips/bcm47xx/Makefile
+@@ -4,4 +4,5 @@
+ #
+ 
+ obj-y				+= irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
++obj-y				+= board.o
+ obj-$(CONFIG_BCM47XX_SSB)	+= wgt634u.o
+--- /dev/null
++++ b/arch/mips/bcm47xx/board.c
+@@ -0,0 +1,223 @@
++#include <linux/export.h>
++#include <linux/string.h>
++#include <bcm47xx_board.h>
++#include <bcm47xx_nvram.h>
++
++struct bcm47xx_board_type {
++	const enum bcm47xx_board board;
++	const char *name;
++};
++
++struct bcm47xx_board_type_list {
++	struct bcm47xx_board_type board;
++	const char *value1;
++	const char *value2;
++};
++
++static const struct bcm47xx_board_type *bcm47xx_board = NULL;
++
++static const struct bcm47xx_board_type_list bcm47xx_board_list_model_name[] = {
++	{{BCM47XX_BOARD_DLINK_DIR130, "D-Link DIR-130"}, "DIR-130",},
++	{{BCM47XX_BOARD_DLINK_DIR330, "D-Link DIR-330"}, "DIR-330",},
++	{ {0}, 0},
++};
++
++static const struct bcm47xx_board_type_list bcm47xx_board_list_model_no[] = {
++	{{BCM47XX_BOARD_ASUS_WL700GE, "Asus WL700"}, "WL700",},
++	{ {0}, 0},
++};
++
++static const struct bcm47xx_board_type_list bcm47xx_board_list_hardware_version[] = {
++	{{BCM47XX_BOARD_ASUS_RTN16, "Asus RT-N16"}, "RT-N16-",},
++	{{BCM47XX_BOARD_ASUS_WL330GE, "Asus WL330GE"}, "WL330GE-",},
++	{{BCM47XX_BOARD_ASUS_WL500GPV1, "Asus WL500GP V1"}, "WL500gp-",},
++	{{BCM47XX_BOARD_ASUS_WL500GPV2, "Asus WL500GP V2"}, "WL500GPV2-",},
++	{{BCM47XX_BOARD_ASUS_WL520GC, "Asus WL520GC"}, "WL520GC-",},
++	{{BCM47XX_BOARD_ASUS_WL520GU, "Asus WL520GU"}, "WL520GU-",},
++	{{BCM47XX_BOARD_BELKIN_F7D4301, "Belkin F7D4301"}, "F7D4301",},
++	{ {0}, 0},
++};
++
++static const struct bcm47xx_board_type_list bcm47xx_board_list_productid[] = {
++	{{BCM47XX_BOARD_ASUS_RTAC66U, "Asus RT-AC66U"}, "RT-AC66U",},
++	{{BCM47XX_BOARD_ASUS_RTN10D, "Asus RT-N10D"}, "RT-N10D",},
++	{{BCM47XX_BOARD_ASUS_RTN10U, "Asus RT-N10U"}, "RT-N10U",},
++	{{BCM47XX_BOARD_ASUS_RTN12, "Asus RT-N12"}, "RT-N12",},
++	{{BCM47XX_BOARD_ASUS_RTN12B1, "Asus RT-N12B1"}, "RT-N12B1",},
++	{{BCM47XX_BOARD_ASUS_RTN12C1, "Asus RT-N12C1"}, "RT-N12C1",},
++	{{BCM47XX_BOARD_ASUS_RTN12D1, "Asus RT-N12D1"}, "RT-N12D1",},
++	{{BCM47XX_BOARD_ASUS_RTN12HP, "Asus RT-N12HP"}, "RT-N12HP",},
++	{{BCM47XX_BOARD_ASUS_RTN15U, "Asus RT-N15U"}, "RT-N15U",},
++	{{BCM47XX_BOARD_ASUS_RTN16, "Asus RT-N16"}, "RT-N16",},
++	{{BCM47XX_BOARD_ASUS_RTN53, "Asus RT-N53"}, "RT-N53",},
++	{{BCM47XX_BOARD_ASUS_RTN66U, "Asus RT-N66U"}, "RT-N66U",},
++	{ {0}, 0},
++};
++
++static const struct bcm47xx_board_type_list bcm47xx_board_list_ModelId[] = {
++	{{BCM47XX_BOARD_DELL_TM2300, "Dell WX-5565"}, "WX-5565",},
++	{{BCM47XX_BOARD_MOTOROLA_WE800G, "Motorola WE800G"}, "WE800G",},
++	{{BCM47XX_BOARD_MOTOROLA_WR850GP, "Motorola WR850GP"}, "WR850GP",},
++	{{BCM47XX_BOARD_MOTOROLA_WR850GV2V3, "Motorola WR850G"}, "WR850G",},
++	{ {0}, 0},
++};
++
++static const struct bcm47xx_board_type_list bcm47xx_board_list_melco_id[] = {
++	{{BCM47XX_BOARD_BUFFALO_WBR2_G54, "Buffalo WBR2-G54"}, "29bb0332",},
++	{{BCM47XX_BOARD_BUFFALO_WHR2_A54G54, "Buffalo WHR2-A54G54"}, "290441dd",},
++	{{BCM47XX_BOARD_BUFFALO_WHR_G125, "Buffalo WHR-G125"}, "32093",},
++	{{BCM47XX_BOARD_BUFFALO_WHR_G54S, "Buffalo WHR-G54S"}, "30182",},
++	{{BCM47XX_BOARD_BUFFALO_WHR_HP_G54, "Buffalo WHR-HP-G54"}, "30189",},
++	{{BCM47XX_BOARD_BUFFALO_WLA2_G54L, "Buffalo WLA2-G54L"}, "29129",},
++	{{BCM47XX_BOARD_BUFFALO_WZR_G300N, "Buffalo WZR-G300N"}, "31120",},
++	{{BCM47XX_BOARD_BUFFALO_WZR_RS_G54, "Buffalo WZR-RS-G54"}, "30083",},
++	{{BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP, "Buffalo WZR-RS-G54HP"}, "30103",},
++	{ {0}, 0},
++};
++
++static const struct bcm47xx_board_type_list bcm47xx_board_list_boot_hw[] = {
++	{{BCM47XX_BOARD_CISCO_M10V1, "Cisco M10"}, "M10", "1.0"}, /* like WRT160N v3.0 */
++	{{BCM47XX_BOARD_CISCO_M20V1, "Cisco M20"}, "M20", "1.0"}, /* like WRT310N v2.0 */
++	{{BCM47XX_BOARD_LINKSYS_E1000V1, "Linksys E1000 V1"}, "E100", "1.0"},  /* like WRT160N v3.0 */
++	{{BCM47XX_BOARD_LINKSYS_E1000V2, "Linksys E1000 V2"}, "E1000", "2.0"},
++	{{BCM47XX_BOARD_LINKSYS_E2000V1, "Linksys E2000 V1"}, "Linksys E2000", "1.0"},
++	{{BCM47XX_BOARD_LINKSYS_E3000V1, "Linksys E3000 V1"}, "E300", "1.0"}, /* like WRT610N v2.0 */
++	{{BCM47XX_BOARD_LINKSYS_E3200V1, "Linksys E3200 V1"}, "E3200", "1.0"},
++	{{BCM47XX_BOARD_LINKSYS_E4200V1, "Linksys E4200 V1"}, "E4200", "1.0"},
++	{{BCM47XX_BOARD_LINKSYS_WRT150NV11, "Linksys WRT150N V1.1"}, "WRT150N", "1.1"},
++	{{BCM47XX_BOARD_LINKSYS_WRT150NV1, "Linksys WRT150N V1"}, "WRT150N", "1"},
++	{{BCM47XX_BOARD_LINKSYS_WRT160NV1, "Linksys WRT160N V1"}, "WRT160N", "1.0"},
++	{{BCM47XX_BOARD_LINKSYS_WRT160NV3, "Linksys WRT160N V3"}, "WRT160N", "3.0"},
++	{{BCM47XX_BOARD_LINKSYS_WRT300NV11, "Linksys WRT300N V1.1"}, "WRT300N", "1.1"},
++	{{BCM47XX_BOARD_LINKSYS_WRT310NV2, "Linksys WRT310N V2"}, "WRT310N", "2.0"},
++	{{BCM47XX_BOARD_LINKSYS_WRT54G3GV2, "Linksys WRT54G3GV2-VF"}, "WRT54G3GV2-VF", "1.0"},
++	{{BCM47XX_BOARD_LINKSYS_WRT610NV1, "Linksys WRT610N V1"}, "WRT610N", "1.0"},
++	{{BCM47XX_BOARD_LINKSYS_WRT610NV2, "Linksys WRT610N V2"}, "WRT610N", "2.0"},
++	{ {0}, 0},
++};
++
++static const struct bcm47xx_board_type_list bcm47xx_board_list_board_id[] = {
++	{{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR",},
++	{{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR",},
++	{{BCM47XX_BOARD_NETGEAR_WNDR3300, "Netgear WNDR3300"}, "U12H093T00_NETGEAR",},
++	{{BCM47XX_BOARD_NETGEAR_WNDR3400V1, "Netgear WNDR3400 V1"}, "U12H155T00_NETGEAR",},
++	{{BCM47XX_BOARD_NETGEAR_WNDR3400V2, "Netgear WNDR3400 V2"}, "U12H187T00_NETGEAR",},
++	{{BCM47XX_BOARD_NETGEAR_WNDR3400VCNA, "Netgear WNDR3400 Vcna"}, "U12H155T01_NETGEAR",},
++	{{BCM47XX_BOARD_NETGEAR_WNDR3700V3, "Netgear WNDR3700 V3"}, "U12H194T00_NETGEAR",},
++	{{BCM47XX_BOARD_NETGEAR_WNDR4000, "Netgear WNDR4000"}, "U12H181T00_NETGEAR",},
++	{{BCM47XX_BOARD_NETGEAR_WNDR4500V1, "Netgear WNDR4500 V1"}, "U12H189T00_NETGEAR",},
++	{{BCM47XX_BOARD_NETGEAR_WNDR4500V2, "Netgear WNDR4500 V2"}, "U12H224T00_NETGEAR",},
++	{{BCM47XX_BOARD_NETGEAR_WNR2000, "Netgear WNR2000"}, "U12H114T00_NETGEAR",},
++	{{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "U12H136T99_NETGEAR",},
++	{{BCM47XX_BOARD_NETGEAR_WNR3500U, "Netgear WNR3500U"}, "U12H136T00_NETGEAR",},
++	{{BCM47XX_BOARD_NETGEAR_WNR3500V2, "Netgear WNR3500 V2"}, "U12H127T00_NETGEAR",},
++	{{BCM47XX_BOARD_NETGEAR_WNR3500V2VC, "Netgear WNR3500 V2vc"}, "U12H127T70_NETGEAR",},
++	{{BCM47XX_BOARD_NETGEAR_WNR834BV2, "Netgear WNR834B V2"}, "U12H081T00_NETGEAR",},
++	{ {0}, 0},
++};
++
++static const struct bcm47xx_board_type bcm47xx_board_unknown[] = {
++	{BCM47XX_BOARD_UNKNOWN, "Unknown Board"},
++};
++
++static inline int startswith(char *source, char *cmp)
++{
++	return !strncmp(source, cmp, strlen(cmp));
++}
++
++static const struct bcm47xx_board_type *bcm47xx_board_get_nvram(void)
++{
++	char buf1[30];
++	char buf2[30];
++	const struct bcm47xx_board_type_list *e;
++
++	if (bcm47xx_nvram_getenv("model_name", buf1, sizeof(buf1)) >= 0) {
++		for (e = bcm47xx_board_list_model_name; e->value1; e++) {
++			if (!strcmp(buf1, e->value1))
++				return &e->board;
++		}
++	}
++
++	if (bcm47xx_nvram_getenv("model_no", buf1, sizeof(buf1)) >= 0) {
++		for (e = bcm47xx_board_list_model_no; e->value1; e++) {
++			if (strstarts(buf1, e->value1))
++				return &e->board;
++		}
++	}
++
++	if (bcm47xx_nvram_getenv("hardware_version", buf1, sizeof(buf1)) >= 0) {
++		for (e = bcm47xx_board_list_hardware_version; e->value1; e++) {
++			if (strstarts(buf1, e->value1))
++				return &e->board;
++		}
++	}
++
++	if (bcm47xx_nvram_getenv("productid", buf1, sizeof(buf1)) >= 0) {
++		for (e = bcm47xx_board_list_productid; e->value1; e++) {
++			if (!strcmp(buf1, e->value1))
++				return &e->board;
++		}
++	}
++
++	if (bcm47xx_nvram_getenv("ModelId", buf1, sizeof(buf1)) >= 0) {
++		for (e = bcm47xx_board_list_ModelId; e->value1; e++) {
++			if (!strcmp(buf1, e->value1))
++				return &e->board;
++		}
++	}
++
++	if (bcm47xx_nvram_getenv("melco_id", buf1, sizeof(buf1)) >= 0 ||
++	    bcm47xx_nvram_getenv("buf1falo_id", buf1, sizeof(buf1)) >= 0) {
++		/* buffalo hardware, check id for specific hardware matches */
++		for (e = bcm47xx_board_list_melco_id; e->value1; e++) {
++			if (!strcmp(buf1, e->value1))
++				return &e->board;
++		}
++	}
++
++	if (bcm47xx_nvram_getenv("boot_hw_model", buf1, sizeof(buf1)) >= 0 &&
++	    bcm47xx_nvram_getenv("boot_hw_ver", buf2, sizeof(buf2)) >= 0) {
++		for (e = bcm47xx_board_list_boot_hw; e->value1; e++) {
++			if (!strcmp(buf1, e->value1) && !strcmp(buf2, e->value2))
++				return &e->board;
++		}
++	}
++
++	if (bcm47xx_nvram_getenv("board_id", buf1, sizeof(buf1)) >= 0) {
++		for (e = bcm47xx_board_list_board_id; e->value1; e++) {
++			if (!strcmp(buf1, e->value1))
++				return &e->board;
++		}
++	}
++	return bcm47xx_board_unknown;
++}
++
++static void bcm47xx_board_detect(void)
++{
++	char buf[15];
++
++	if (bcm47xx_board != NULL)
++		return;
++	/* check if the nvram is available */
++	if (bcm47xx_nvram_getenv("boardtype", buf, sizeof(buf)) == -ENXIO) {
++		bcm47xx_board = bcm47xx_board_unknown;
++		return;
++	}
++
++	bcm47xx_board = bcm47xx_board_get_nvram();
++	pr_info("Found board: \"%s\"\n", bcm47xx_board->name);
++}
++
++enum bcm47xx_board bcm47xx_board_get(void)
++{
++	bcm47xx_board_detect();
++	return bcm47xx_board->board;
++}
++EXPORT_SYMBOL(bcm47xx_board_get);
++
++const char *bcm47xx_board_get_name(void)
++{
++	bcm47xx_board_detect();
++	return bcm47xx_board->name;
++}
++EXPORT_SYMBOL(bcm47xx_board_get_name);
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
+@@ -0,0 +1,91 @@
++#ifndef __BCM47XX_BOARD_H
++#define __BCM47XX_BOARD_H
++
++enum bcm47xx_board {
++	BCM47XX_BOARD_ASUS_RTAC66U,
++	BCM47XX_BOARD_ASUS_RTN10D,
++	BCM47XX_BOARD_ASUS_RTN10U,
++	BCM47XX_BOARD_ASUS_RTN12,
++	BCM47XX_BOARD_ASUS_RTN12B1,
++	BCM47XX_BOARD_ASUS_RTN12C1,
++	BCM47XX_BOARD_ASUS_RTN12D1,
++	BCM47XX_BOARD_ASUS_RTN12HP,
++	BCM47XX_BOARD_ASUS_RTN15U,
++	BCM47XX_BOARD_ASUS_RTN16,
++	BCM47XX_BOARD_ASUS_RTN53,
++	BCM47XX_BOARD_ASUS_RTN66U,
++	BCM47XX_BOARD_ASUS_WL330GE,
++	BCM47XX_BOARD_ASUS_WL500GPV1,
++	BCM47XX_BOARD_ASUS_WL500GPV2,
++	BCM47XX_BOARD_ASUS_WL520GC,
++	BCM47XX_BOARD_ASUS_WL520GU,
++	BCM47XX_BOARD_ASUS_WL700GE,
++
++	BCM47XX_BOARD_BELKIN_F7D4301,
++
++	BCM47XX_BOARD_BUFFALO_WBR2_G54,
++	BCM47XX_BOARD_BUFFALO_WHR2_A54G54,
++	BCM47XX_BOARD_BUFFALO_WHR_G125,
++	BCM47XX_BOARD_BUFFALO_WHR_G54S,
++	BCM47XX_BOARD_BUFFALO_WHR_HP_G54,
++	BCM47XX_BOARD_BUFFALO_WLA2_G54L,
++	BCM47XX_BOARD_BUFFALO_WZR_G300N,
++	BCM47XX_BOARD_BUFFALO_WZR_RS_G54,
++	BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP,
++
++	BCM47XX_BOARD_CISCO_M10V1,
++	BCM47XX_BOARD_CISCO_M20V1,
++
++	BCM47XX_BOARD_DELL_TM2300,
++
++	BCM47XX_BOARD_DLINK_DIR130,
++	BCM47XX_BOARD_DLINK_DIR330,
++
++	BCM47XX_BOARD_LINKSYS_E1000V1,
++	BCM47XX_BOARD_LINKSYS_E1000V2,
++	BCM47XX_BOARD_LINKSYS_E2000V1,
++	BCM47XX_BOARD_LINKSYS_E3000V1,
++	BCM47XX_BOARD_LINKSYS_E3200V1,
++	BCM47XX_BOARD_LINKSYS_E4200V1,
++	BCM47XX_BOARD_LINKSYS_WRT150NV1,
++	BCM47XX_BOARD_LINKSYS_WRT150NV11,
++	BCM47XX_BOARD_LINKSYS_WRT160NV1,
++	BCM47XX_BOARD_LINKSYS_WRT160NV3,
++	BCM47XX_BOARD_LINKSYS_WRT300NV11,
++	BCM47XX_BOARD_LINKSYS_WRT310NV2,
++	BCM47XX_BOARD_LINKSYS_WRT54G3GV2,
++	BCM47XX_BOARD_LINKSYS_WRT610NV1,
++	BCM47XX_BOARD_LINKSYS_WRT610NV2,
++
++	BCM47XX_BOARD_MOTOROLA_WE800G,
++	BCM47XX_BOARD_MOTOROLA_WR850GP,
++	BCM47XX_BOARD_MOTOROLA_WR850GV2V3,
++
++	BCM47XX_BOARD_NETGEAR_WGR614V8,
++	BCM47XX_BOARD_NETGEAR_WGR614V9,
++	BCM47XX_BOARD_NETGEAR_WNDR3300,
++	BCM47XX_BOARD_NETGEAR_WNDR3400V1,
++	BCM47XX_BOARD_NETGEAR_WNDR3400V2,
++	BCM47XX_BOARD_NETGEAR_WNDR3400VCNA,
++	BCM47XX_BOARD_NETGEAR_WNDR3700V3,
++	BCM47XX_BOARD_NETGEAR_WNDR4000,
++	BCM47XX_BOARD_NETGEAR_WNDR4500V1,
++	BCM47XX_BOARD_NETGEAR_WNDR4500V2,
++	BCM47XX_BOARD_NETGEAR_WNR2000,
++	BCM47XX_BOARD_NETGEAR_WNR3500L,
++	BCM47XX_BOARD_NETGEAR_WNR3500U,
++	BCM47XX_BOARD_NETGEAR_WNR3500V2,
++	BCM47XX_BOARD_NETGEAR_WNR3500V2VC,
++	BCM47XX_BOARD_NETGEAR_WNR834BV2,
++
++	/* TODO */
++	BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE,
++
++	BCM47XX_BOARD_UNKNOWN,
++	BCM47XX_BOARD_NON,
++};
++
++extern enum bcm47xx_board bcm47xx_board_get(void);
++extern const char *bcm47xx_board_get_name(void);
++
++#endif /* __BCM47XX_BOARD_H */
diff --git a/target/linux/brcm47xx/patches-3.9/261-MIPS-BCM47XX-print-board-name-in-proc-cpuinfo.patch b/target/linux/brcm47xx/patches-3.9/261-MIPS-BCM47XX-print-board-name-in-proc-cpuinfo.patch
new file mode 100644
index 0000000000..abfa4004f2
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/261-MIPS-BCM47XX-print-board-name-in-proc-cpuinfo.patch
@@ -0,0 +1,39 @@
+--- a/arch/mips/bcm47xx/prom.c
++++ b/arch/mips/bcm47xx/prom.c
+@@ -32,10 +32,35 @@
+ #include <asm/bootinfo.h>
+ #include <asm/fw/cfe/cfe_api.h>
+ #include <asm/fw/cfe/cfe_error.h>
++#include <bcm47xx.h>
++#include <bcm47xx_board.h>
++
++static u16 get_chip_id(void)
++{
++	switch (bcm47xx_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++	case BCM47XX_BUS_TYPE_SSB:
++		return bcm47xx_bus.ssb.chip_id;
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		return bcm47xx_bus.bcma.bus.chipinfo.id;
++#endif
++	}
++	return 0;
++}
+ 
+ const char *get_system_type(void)
+ {
+-	return "Broadcom BCM47XX";
++	static char buf[128];
++	u16 chip_id = get_chip_id();
++
++	snprintf(buf, sizeof(buf),
++		 (chip_id > 0x9999) ? "Broadcom BCM%d (%s)" :
++				      "Broadcom BCM%04X (%s)",
++		 chip_id, bcm47xx_board_get_name());
++
++	return buf;
+ }
+ 
+ static __init int prom_init_cfe(void)
diff --git a/target/linux/brcm47xx/patches-3.9/280-activate_ssb_support_in_usb.patch b/target/linux/brcm47xx/patches-3.9/280-activate_ssb_support_in_usb.patch
new file mode 100644
index 0000000000..c4382ed514
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/280-activate_ssb_support_in_usb.patch
@@ -0,0 +1,25 @@
+This prevents the options from being delete with make kernel_oldconfig.
+---
+ drivers/ssb/Kconfig |    2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/bcma/Kconfig
++++ b/drivers/bcma/Kconfig
+@@ -37,6 +37,7 @@ config BCMA_DRIVER_PCI_HOSTMODE
+ config BCMA_HOST_SOC
+ 	bool
+ 	depends on BCMA_DRIVER_MIPS
++	select USB_HCD_BCMA if USB_EHCI_HCD || USB_OHCI_HCD
+ 
+ config BCMA_DRIVER_MIPS
+ 	bool "BCMA Broadcom MIPS core driver"
+--- a/drivers/ssb/Kconfig
++++ b/drivers/ssb/Kconfig
+@@ -146,6 +146,7 @@ config SSB_SFLASH
+ config SSB_EMBEDDED
+ 	bool
+ 	depends on SSB_DRIVER_MIPS
++	select USB_HCD_SSB if USB_EHCI_HCD || USB_OHCI_HCD
+ 	default y
+ 
+ config SSB_DRIVER_EXTIF
diff --git a/target/linux/brcm47xx/patches-3.9/300-fork_cacheflush.patch b/target/linux/brcm47xx/patches-3.9/300-fork_cacheflush.patch
new file mode 100644
index 0000000000..686fb1b945
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/300-fork_cacheflush.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/include/asm/cacheflush.h
++++ b/arch/mips/include/asm/cacheflush.h
+@@ -32,7 +32,7 @@
+ extern void (*flush_cache_all)(void);
+ extern void (*__flush_cache_all)(void);
+ extern void (*flush_cache_mm)(struct mm_struct *mm);
+-#define flush_cache_dup_mm(mm)	do { (void) (mm); } while (0)
++#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+ extern void (*flush_cache_range)(struct vm_area_struct *vma,
+ 	unsigned long start, unsigned long end);
+ extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
diff --git a/target/linux/brcm47xx/patches-3.9/310-no_highpage.patch b/target/linux/brcm47xx/patches-3.9/310-no_highpage.patch
new file mode 100644
index 0000000000..7f1889eda2
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/310-no_highpage.patch
@@ -0,0 +1,66 @@
+--- a/arch/mips/include/asm/page.h
++++ b/arch/mips/include/asm/page.h
+@@ -46,6 +46,7 @@
+ #endif /* CONFIG_MIPS_HUGE_TLB_SUPPORT */
+ 
+ #include <linux/pfn.h>
++#include <asm/cpu-features.h>
+ #include <asm/io.h>
+ 
+ extern void build_clear_page(void);
+@@ -81,13 +82,16 @@ static inline void clear_user_page(void
+ 		flush_data_cache_page((unsigned long)addr);
+ }
+ 
+-extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
+-	struct page *to);
+-struct vm_area_struct;
+-extern void copy_user_highpage(struct page *to, struct page *from,
+-	unsigned long vaddr, struct vm_area_struct *vma);
++static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
++	struct page *to)
++{
++	extern void (*flush_data_cache_page)(unsigned long addr);
+ 
+-#define __HAVE_ARCH_COPY_USER_HIGHPAGE
++	copy_page(vto, vfrom);
++	if (!cpu_has_ic_fills_f_dc ||
++	    pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
++		flush_data_cache_page((unsigned long)vto);
++}
+ 
+ /*
+  * These are used to make use of C type-checking..
+--- a/arch/mips/mm/init.c
++++ b/arch/mips/mm/init.c
+@@ -202,30 +202,6 @@ void kunmap_coherent(void)
+ 	preempt_check_resched();
+ }
+ 
+-void copy_user_highpage(struct page *to, struct page *from,
+-	unsigned long vaddr, struct vm_area_struct *vma)
+-{
+-	void *vfrom, *vto;
+-
+-	vto = kmap_atomic(to);
+-	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+-	    page_mapped(from) && !Page_dcache_dirty(from)) {
+-		vfrom = kmap_coherent(from, vaddr);
+-		copy_page(vto, vfrom);
+-		kunmap_coherent();
+-	} else {
+-		vfrom = kmap_atomic(from);
+-		copy_page(vto, vfrom);
+-		kunmap_atomic(vfrom);
+-	}
+-	if ((!cpu_has_ic_fills_f_dc) ||
+-	    pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
+-		flush_data_cache_page((unsigned long)vto);
+-	kunmap_atomic(vto);
+-	/* Make sure this page is cleared on other CPU's too before using it */
+-	smp_wmb();
+-}
+-
+ void copy_to_user_page(struct vm_area_struct *vma,
+ 	struct page *page, unsigned long vaddr, void *dst, const void *src,
+ 	unsigned long len)
diff --git a/target/linux/brcm47xx/patches-3.9/400-arch-bcm47xx.patch b/target/linux/brcm47xx/patches-3.9/400-arch-bcm47xx.patch
new file mode 100644
index 0000000000..9d7c9bb934
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/400-arch-bcm47xx.patch
@@ -0,0 +1,177 @@
+--- a/arch/mips/bcm47xx/nvram.c
++++ b/arch/mips/bcm47xx/nvram.c
+@@ -190,3 +190,30 @@ int bcm47xx_nvram_getenv(char *name, cha
+ 	return -ENOENT;
+ }
+ EXPORT_SYMBOL(bcm47xx_nvram_getenv);
++
++char *nvram_get(const char *name)
++{
++	char *var, *value, *end, *eq;
++
++	if (!name)
++		return NULL;
++
++	if (!nvram_buf[0])
++		nvram_init();
++
++	/* Look for name=value and return value */
++	var = &nvram_buf[sizeof(struct nvram_header)];
++	end = nvram_buf + sizeof(nvram_buf) - 2;
++	end[0] = end[1] = '\0';
++	for (; *var; var = value + strlen(value) + 1) {
++		eq = strchr(var, '=');
++		if (!eq)
++			break;
++		value = eq + 1;
++		if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0)
++			return value;
++	}
++
++	return NULL;
++}
++EXPORT_SYMBOL(nvram_get);
+--- a/arch/mips/bcm47xx/Makefile
++++ b/arch/mips/bcm47xx/Makefile
+@@ -5,4 +5,5 @@
+ 
+ obj-y				+= irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
+ obj-y				+= board.o
++obj-y				+= gpio.o
+ obj-$(CONFIG_BCM47XX_SSB)	+= wgt634u.o
+--- /dev/null
++++ b/arch/mips/bcm47xx/gpio.c
+@@ -0,0 +1,119 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
++ * Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Parts of this file are based on Atheros AR71XX/AR724X/AR913X GPIO
++ */
++
++#include <linux/export.h>
++#include <linux/gpio.h>
++#include <linux/ssb/ssb_embedded.h>
++#include <linux/bcma/bcma.h>
++
++#include <bcm47xx.h>
++
++/* low level BCM47xx gpio api */
++u32 bcm47xx_gpio_in(u32 mask)
++{
++	switch (bcm47xx_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++	case BCM47XX_BUS_TYPE_SSB:
++		return ssb_gpio_in(&bcm47xx_bus.ssb, mask);
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		return bcma_chipco_gpio_in(&bcm47xx_bus.bcma.bus.drv_cc, mask);
++#endif
++	}
++	return -EINVAL;
++}
++EXPORT_SYMBOL(bcm47xx_gpio_in);
++
++u32 bcm47xx_gpio_out(u32 mask, u32 value)
++{
++	switch (bcm47xx_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++	case BCM47XX_BUS_TYPE_SSB:
++		return ssb_gpio_out(&bcm47xx_bus.ssb, mask, value);
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		return bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, mask,
++					    value);
++#endif
++	}
++	return -EINVAL;
++}
++EXPORT_SYMBOL(bcm47xx_gpio_out);
++
++u32 bcm47xx_gpio_outen(u32 mask, u32 value)
++{
++	switch (bcm47xx_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++	case BCM47XX_BUS_TYPE_SSB:
++		return ssb_gpio_outen(&bcm47xx_bus.ssb, mask, value);
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		return bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc,
++					      mask, value);
++#endif
++	}
++	return -EINVAL;
++}
++EXPORT_SYMBOL(bcm47xx_gpio_outen);
++
++u32 bcm47xx_gpio_control(u32 mask, u32 value)
++{
++	switch (bcm47xx_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++	case BCM47XX_BUS_TYPE_SSB:
++		return ssb_gpio_control(&bcm47xx_bus.ssb, mask, value);
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		return bcma_chipco_gpio_control(&bcm47xx_bus.bcma.bus.drv_cc,
++						mask, value);
++#endif
++	}
++	return -EINVAL;
++}
++EXPORT_SYMBOL(bcm47xx_gpio_control);
++
++u32 bcm47xx_gpio_intmask(u32 mask, u32 value)
++{
++	switch (bcm47xx_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++	case BCM47XX_BUS_TYPE_SSB:
++		return ssb_gpio_intmask(&bcm47xx_bus.ssb, mask, value);
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		return bcma_chipco_gpio_intmask(&bcm47xx_bus.bcma.bus.drv_cc,
++						mask, value);
++#endif
++	}
++	return -EINVAL;
++}
++EXPORT_SYMBOL(bcm47xx_gpio_intmask);
++
++u32 bcm47xx_gpio_polarity(u32 mask, u32 value)
++{
++	switch (bcm47xx_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++	case BCM47XX_BUS_TYPE_SSB:
++		return ssb_gpio_polarity(&bcm47xx_bus.ssb, mask, value);
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		return bcma_chipco_gpio_polarity(&bcm47xx_bus.bcma.bus.drv_cc,
++						 mask, value);
++#endif
++	}
++	return -EINVAL;
++}
++EXPORT_SYMBOL(bcm47xx_gpio_polarity);
+--- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
++++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
+@@ -14,4 +14,11 @@ static inline int irq_to_gpio(unsigned i
+ 	return -EINVAL;
+ }
+ 
++u32 bcm47xx_gpio_in(u32 mask);
++u32 bcm47xx_gpio_out(u32 mask, u32 value);
++u32 bcm47xx_gpio_outen(u32 mask, u32 value);
++u32 bcm47xx_gpio_control(u32 mask, u32 value);
++u32 bcm47xx_gpio_intmask(u32 mask, u32 value);
++u32 bcm47xx_gpio_polarity(u32 mask, u32 value);
++
+ #endif
diff --git a/target/linux/brcm47xx/patches-3.9/520-MIPS-BCM47XX-fix-time-for-WL520G-and-other-200-MHz-C.patch b/target/linux/brcm47xx/patches-3.9/520-MIPS-BCM47XX-fix-time-for-WL520G-and-other-200-MHz-C.patch
new file mode 100644
index 0000000000..ff670e87a9
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/520-MIPS-BCM47XX-fix-time-for-WL520G-and-other-200-MHz-C.patch
@@ -0,0 +1,44 @@
+--- a/arch/mips/bcm47xx/time.c
++++ b/arch/mips/bcm47xx/time.c
+@@ -27,10 +27,14 @@
+ #include <linux/ssb/ssb.h>
+ #include <asm/time.h>
+ #include <bcm47xx.h>
++#include <bcm47xx_nvram.h>
+ 
+ void __init plat_time_init(void)
+ {
+ 	unsigned long hz = 0;
++	u16 chip_id = 0;
++	char buf[10];
++	int len;
+ 
+ 	/*
+ 	 * Use deterministic values for initial counter interrupt
+@@ -43,15 +47,26 @@ void __init plat_time_init(void)
+ #ifdef CONFIG_BCM47XX_SSB
+ 	case BCM47XX_BUS_TYPE_SSB:
+ 		hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2;
++		chip_id = bcm47xx_bus.ssb.chip_id;
+ 		break;
+ #endif
+ #ifdef CONFIG_BCM47XX_BCMA
+ 	case BCM47XX_BUS_TYPE_BCMA:
+ 		hz = bcma_cpu_clock(&bcm47xx_bus.bcma.bus.drv_mips) / 2;
++		chip_id = bcm47xx_bus.bcma.bus.chipinfo.id;
+ 		break;
+ #endif
+ 	}
+ 
++	if (chip_id == 0x5354) {
++		len = bcm47xx_nvram_getenv("clkfreq", buf, sizeof(buf));
++		if (len >= 0 && !strncmp(buf, "200", 4))
++			hz = 100000000;
++		len = bcm47xx_nvram_getenv("hardware_version", buf, sizeof(buf));
++		if (len >= 0 && !strncmp(buf, "WL520G", 6))
++			hz = 100000000;
++
++	}
+ 	if (!hz)
+ 		hz = 100000000;
+ 
diff --git a/target/linux/brcm47xx/patches-3.9/610-pci_ide_fix.patch b/target/linux/brcm47xx/patches-3.9/610-pci_ide_fix.patch
new file mode 100644
index 0000000000..f254b203bd
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/610-pci_ide_fix.patch
@@ -0,0 +1,14 @@
+--- a/include/linux/ide.h
++++ b/include/linux/ide.h
+@@ -195,7 +195,11 @@ static inline void ide_std_init_ports(st
+ 	hw->io_ports.ctl_addr = ctl_addr;
+ }
+ 
++#if defined CONFIG_BCM47XX
++# define MAX_HWIFS	2
++#else
+ #define MAX_HWIFS	10
++#endif
+ 
+ /*
+  * Now for the data we need to maintain per-drive:  ide_drive_t
diff --git a/target/linux/brcm47xx/patches-3.9/812-disable_wgt634u_crap.patch b/target/linux/brcm47xx/patches-3.9/812-disable_wgt634u_crap.patch
new file mode 100644
index 0000000000..f2950c93bf
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/812-disable_wgt634u_crap.patch
@@ -0,0 +1,184 @@
+--- a/arch/mips/bcm47xx/Makefile
++++ b/arch/mips/bcm47xx/Makefile
+@@ -6,4 +6,3 @@
+ obj-y				+= irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
+ obj-y				+= board.o
+ obj-y				+= gpio.o
+-obj-$(CONFIG_BCM47XX_SSB)	+= wgt634u.o
+--- a/arch/mips/bcm47xx/wgt634u.c
++++ /dev/null
+@@ -1,174 +0,0 @@
+-/*
+- * This file is subject to the terms and conditions of the GNU General Public
+- * License.  See the file "COPYING" in the main directory of this archive
+- * for more details.
+- *
+- * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
+- */
+-
+-#include <linux/platform_device.h>
+-#include <linux/module.h>
+-#include <linux/leds.h>
+-#include <linux/mtd/physmap.h>
+-#include <linux/ssb/ssb.h>
+-#include <linux/ssb/ssb_embedded.h>
+-#include <linux/interrupt.h>
+-#include <linux/reboot.h>
+-#include <linux/gpio.h>
+-#include <asm/mach-bcm47xx/bcm47xx.h>
+-
+-/* GPIO definitions for the WGT634U */
+-#define WGT634U_GPIO_LED	3
+-#define WGT634U_GPIO_RESET	2
+-#define WGT634U_GPIO_TP1	7
+-#define WGT634U_GPIO_TP2	6
+-#define WGT634U_GPIO_TP3	5
+-#define WGT634U_GPIO_TP4	4
+-#define WGT634U_GPIO_TP5	1
+-
+-static struct gpio_led wgt634u_leds[] = {
+-	{
+-		.name = "power",
+-		.gpio = WGT634U_GPIO_LED,
+-		.active_low = 1,
+-		.default_trigger = "heartbeat",
+-	},
+-};
+-
+-static struct gpio_led_platform_data wgt634u_led_data = {
+-	.num_leds =	ARRAY_SIZE(wgt634u_leds),
+-	.leds =		wgt634u_leds,
+-};
+-
+-static struct platform_device wgt634u_gpio_leds = {
+-	.name =		"leds-gpio",
+-	.id =		-1,
+-	.dev = {
+-		.platform_data = &wgt634u_led_data,
+-	}
+-};
+-
+-
+-/* 8MiB flash. The struct mtd_partition matches original Netgear WGT634U
+-   firmware. */
+-static struct mtd_partition wgt634u_partitions[] = {
+-	{
+-		.name	    = "cfe",
+-		.offset	    = 0,
+-		.size	    = 0x60000,		/* 384k */
+-		.mask_flags = MTD_WRITEABLE	/* force read-only */
+-	},
+-	{
+-		.name	= "config",
+-		.offset = 0x60000,
+-		.size	= 0x20000		/* 128k */
+-	},
+-	{
+-		.name	= "linux",
+-		.offset = 0x80000,
+-		.size	= 0x140000		/* 1280k */
+-	},
+-	{
+-		.name	= "jffs",
+-		.offset = 0x1c0000,
+-		.size	= 0x620000		/* 6272k */
+-	},
+-	{
+-		.name	= "nvram",
+-		.offset = 0x7e0000,
+-		.size	= 0x20000		/* 128k */
+-	},
+-};
+-
+-static struct physmap_flash_data wgt634u_flash_data = {
+-	.parts	  = wgt634u_partitions,
+-	.nr_parts = ARRAY_SIZE(wgt634u_partitions)
+-};
+-
+-static struct resource wgt634u_flash_resource = {
+-	.flags = IORESOURCE_MEM,
+-};
+-
+-static struct platform_device wgt634u_flash = {
+-	.name	       = "physmap-flash",
+-	.id	       = 0,
+-	.dev	       = { .platform_data = &wgt634u_flash_data, },
+-	.resource      = &wgt634u_flash_resource,
+-	.num_resources = 1,
+-};
+-
+-/* Platform devices */
+-static struct platform_device *wgt634u_devices[] __initdata = {
+-	&wgt634u_flash,
+-	&wgt634u_gpio_leds,
+-};
+-
+-static irqreturn_t gpio_interrupt(int irq, void *ignored)
+-{
+-	int state;
+-
+-	/* Interrupts are shared, check if the current one is
+-	   a GPIO interrupt. */
+-	if (!ssb_chipco_irq_status(&bcm47xx_bus.ssb.chipco,
+-				   SSB_CHIPCO_IRQ_GPIO))
+-		return IRQ_NONE;
+-
+-	state = gpio_get_value(WGT634U_GPIO_RESET);
+-
+-	/* Interrupt are level triggered, revert the interrupt polarity
+-	   to clear the interrupt. */
+-	ssb_gpio_polarity(&bcm47xx_bus.ssb, 1 << WGT634U_GPIO_RESET,
+-			  state ? 1 << WGT634U_GPIO_RESET : 0);
+-
+-	if (!state) {
+-		printk(KERN_INFO "Reset button pressed");
+-		ctrl_alt_del();
+-	}
+-
+-	return IRQ_HANDLED;
+-}
+-
+-static int __init wgt634u_init(void)
+-{
+-	/* There is no easy way to detect that we are running on a WGT634U
+-	 * machine. Use the MAC address as an heuristic. Netgear Inc. has
+-	 * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
+-	 */
+-	u8 *et0mac;
+-
+-	if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB)
+-		return -ENODEV;
+-
+-	et0mac = bcm47xx_bus.ssb.sprom.et0mac;
+-
+-	if (et0mac[0] == 0x00 &&
+-	    ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
+-	     (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
+-		struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore;
+-
+-		printk(KERN_INFO "WGT634U machine detected.\n");
+-
+-		if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
+-				 gpio_interrupt, IRQF_SHARED,
+-				 "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) {
+-			gpio_direction_input(WGT634U_GPIO_RESET);
+-			ssb_gpio_intmask(&bcm47xx_bus.ssb,
+-					 1 << WGT634U_GPIO_RESET,
+-					 1 << WGT634U_GPIO_RESET);
+-			ssb_chipco_irq_mask(&bcm47xx_bus.ssb.chipco,
+-					    SSB_CHIPCO_IRQ_GPIO,
+-					    SSB_CHIPCO_IRQ_GPIO);
+-		}
+-
+-		wgt634u_flash_data.width = mcore->pflash.buswidth;
+-		wgt634u_flash_resource.start = mcore->pflash.window;
+-		wgt634u_flash_resource.end = mcore->pflash.window
+-					   + mcore->pflash.window_size
+-					   - 1;
+-		return platform_add_devices(wgt634u_devices,
+-					    ARRAY_SIZE(wgt634u_devices));
+-	} else
+-		return -ENODEV;
+-}
+-
+-module_init(wgt634u_init);
diff --git a/target/linux/brcm47xx/patches-3.9/820-wgt634u-nvram-fix.patch b/target/linux/brcm47xx/patches-3.9/820-wgt634u-nvram-fix.patch
new file mode 100644
index 0000000000..cf21550239
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/820-wgt634u-nvram-fix.patch
@@ -0,0 +1,306 @@
+The Netgear wgt634u uses a different format for storing the 
+configuration. This patch is needed to read out the correct 
+configuration. The cfe_env.c file uses a different method way to read 
+out the configuration than the in kernel cfe config reader.
+
+--- a/arch/mips/bcm47xx/Makefile
++++ b/arch/mips/bcm47xx/Makefile
+@@ -6,3 +6,4 @@
+ obj-y				+= irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
+ obj-y				+= board.o
+ obj-y				+= gpio.o
++obj-y				+= cfe_env.o
+--- /dev/null
++++ b/arch/mips/bcm47xx/cfe_env.c
+@@ -0,0 +1,229 @@
++/*
++ * CFE environment variable access
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * Copyright 2006, Felix Fietkau <nbd@openwrt.org>
++ * 
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <asm/io.h>
++#include <asm/uaccess.h>
++
++#define NVRAM_SIZE       (0x1ff0)
++static char _nvdata[NVRAM_SIZE];
++static char _valuestr[256];
++
++/*
++ * TLV types.  These codes are used in the "type-length-value"
++ * encoding of the items stored in the NVRAM device (flash or EEPROM)
++ *
++ * The layout of the flash/nvram is as follows:
++ *
++ * <type> <length> <data ...> <type> <length> <data ...> <type_end>
++ *
++ * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
++ * The "length" field marks the length of the data section, not
++ * including the type and length fields.
++ *
++ * Environment variables are stored as follows:
++ *
++ * <type_env> <length> <flags> <name> = <value>
++ *
++ * If bit 0 (low bit) is set, the length is an 8-bit value.
++ * If bit 0 (low bit) is clear, the length is a 16-bit value
++ * 
++ * Bit 7 set indicates "user" TLVs.  In this case, bit 0 still
++ * indicates the size of the length field.  
++ *
++ * Flags are from the constants below:
++ *
++ */
++#define ENV_LENGTH_16BITS	0x00	/* for low bit */
++#define ENV_LENGTH_8BITS	0x01
++
++#define ENV_TYPE_USER		0x80
++
++#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
++#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
++
++/*
++ * The actual TLV types we support
++ */
++
++#define ENV_TLV_TYPE_END	0x00	
++#define ENV_TLV_TYPE_ENV	ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
++
++/*
++ * Environment variable flags 
++ */
++
++#define ENV_FLG_NORMAL		0x00	/* normal read/write */
++#define ENV_FLG_BUILTIN		0x01	/* builtin - not stored in flash */
++#define ENV_FLG_READONLY	0x02	/* read-only - cannot be changed */
++
++#define ENV_FLG_MASK		0xFF	/* mask of attributes we keep */
++#define ENV_FLG_ADMIN		0x100	/* lets us internally override permissions */
++
++
++/*  *********************************************************************
++    *  _nvram_read(buffer,offset,length)
++    *  
++    *  Read data from the NVRAM device
++    *  
++    *  Input parameters: 
++    *  	   buffer - destination buffer
++    *  	   offset - offset of data to read
++    *  	   length - number of bytes to read
++    *  	   
++    *  Return value:
++    *  	   number of bytes read, or <0 if error occured
++    ********************************************************************* */
++static int
++_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
++{
++    int i;
++    if (offset > NVRAM_SIZE)
++	return -1; 
++
++    for ( i = 0; i < length; i++) {
++	buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
++    }
++    return length;
++}
++
++
++static char*
++_strnchr(const char *dest,int c,size_t cnt)
++{
++	while (*dest && (cnt > 0)) {
++	if (*dest == c) return (char *) dest;
++	dest++;
++	cnt--;
++	}
++	return NULL;
++}
++
++
++
++/*
++ * Core support API: Externally visible.
++ */
++
++/*
++ * Get the value of an NVRAM variable
++ * @param	name	name of variable to get
++ * @return	value of variable or NULL if undefined
++ */
++
++char* 
++cfe_env_get(unsigned char *nv_buf, char* name)
++{
++    int size;
++    unsigned char *buffer;
++    unsigned char *ptr;
++    unsigned char *envval;
++    unsigned int reclen;
++    unsigned int rectype;
++    int offset;
++    int flg;
++    
++	if (!strcmp(name, "nvram_type"))
++		return "cfe";
++	
++    size = NVRAM_SIZE;
++    buffer = &_nvdata[0];
++
++    ptr = buffer;
++    offset = 0;
++
++    /* Read the record type and length */
++    if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
++	goto error;
++    }
++    
++    while ((*ptr != ENV_TLV_TYPE_END)  && (size > 1)) {
++
++	/* Adjust pointer for TLV type */
++	rectype = *(ptr);
++	offset++;
++	size--;
++
++	/* 
++	 * Read the length.  It can be either 1 or 2 bytes
++	 * depending on the code 
++	 */
++	if (rectype & ENV_LENGTH_8BITS) {
++	    /* Read the record type and length - 8 bits */
++	    if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
++		goto error;
++	    }
++	    reclen = *(ptr);
++	    size--;
++	    offset++;
++	}
++	else {
++	    /* Read the record type and length - 16 bits, MSB first */
++	    if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
++		goto error;
++	    }
++	    reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
++	    size -= 2;
++	    offset += 2;
++	}
++
++	if (reclen > size)
++	    break;	/* should not happen, bad NVRAM */
++
++	switch (rectype) {
++	    case ENV_TLV_TYPE_ENV:
++		/* Read the TLV data */
++		if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
++		    goto error;
++		flg = *ptr++;
++		envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
++		if (envval) {
++		    *envval++ = '\0';
++		    memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
++		    _valuestr[(reclen-1)-(envval-ptr)] = '\0';
++#if 0			
++		    printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
++#endif
++		    if(!strcmp(ptr, name)){
++			return _valuestr;
++		    }
++		    if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
++			return _valuestr;
++		}
++		break;
++		
++	    default: 
++		/* Unknown TLV type, skip it. */
++		break;
++	    }
++
++	/*
++	 * Advance to next TLV 
++	 */
++		
++	size -= (int)reclen;
++	offset += reclen;
++
++	/* Read the next record type */
++	ptr = buffer;
++	if (_nvram_read(nv_buf, ptr,offset,1) != 1)
++	    goto error;
++	}
++
++error:
++    return NULL;
++
++}
++
+--- a/arch/mips/bcm47xx/nvram.c
++++ b/arch/mips/bcm47xx/nvram.c
+@@ -22,6 +22,8 @@
+ #include <asm/mach-bcm47xx/bcm47xx.h>
+ 
+ static char nvram_buf[NVRAM_SPACE];
++static int cfe_env;
++extern char *cfe_env_get(char *nv_buf, const char *name);
+ 
+ static u32 find_nvram_size(u32 end)
+ {
+@@ -47,6 +49,26 @@ static int nvram_find_and_copy(u32 base,
+ 	u32 *src, *dst;
+ 	u32 size;
+ 
++	cfe_env = 0;
++
++	/* XXX: hack for supporting the CFE environment stuff on WGT634U */
++	if (lim >= 8 * 1024 * 1024) {
++		src = (u32 *) KSEG1ADDR(base + 8 * 1024 * 1024 - 0x2000);
++		dst = (u32 *) nvram_buf;
++
++		if ((*src & 0xff00ff) == 0x000001) {
++			printk("early_nvram_init: WGT634U NVRAM found.\n");
++
++			for (i = 0; i < 0x1ff0; i++) {
++				if (*src == 0xFFFFFFFF)
++					break;
++				*dst++ = *src++;
++			}
++			cfe_env = 1;
++			return 0;
++		}
++	}
++
+ 	/* TODO: when nvram is on nand flash check for bad blocks first. */
+ 	off = FLASH_MIN;
+ 	while (off <= lim) {
+@@ -173,6 +195,13 @@ int bcm47xx_nvram_getenv(char *name, cha
+ 			return err;
+ 	}
+ 
++	if (cfe_env) {
++		value = cfe_env_get(nvram_buf, name);
++		if (!value)
++			return -ENOENT;
++		return snprintf(val, val_len, "%s", value);
++	}
++
+ 	/* Look for name=value and return value */
+ 	var = &nvram_buf[sizeof(struct nvram_header)];
+ 	end = nvram_buf + sizeof(nvram_buf) - 2;
+@@ -201,6 +230,9 @@ char *nvram_get(const char *name)
+ 	if (!nvram_buf[0])
+ 		nvram_init();
+ 
++	if (cfe_env)
++		return cfe_env_get(nvram_buf, name);
++
+ 	/* Look for name=value and return value */
+ 	var = &nvram_buf[sizeof(struct nvram_header)];
+ 	end = nvram_buf + sizeof(nvram_buf) - 2;
diff --git a/target/linux/brcm47xx/patches-3.9/920-cache-wround.patch b/target/linux/brcm47xx/patches-3.9/920-cache-wround.patch
new file mode 100644
index 0000000000..126c1ff77b
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/920-cache-wround.patch
@@ -0,0 +1,138 @@
+--- a/arch/mips/include/asm/r4kcache.h
++++ b/arch/mips/include/asm/r4kcache.h
+@@ -20,10 +20,28 @@
+ #ifdef CONFIG_BCM47XX
+ #include <asm/paccess.h>
+ #include <linux/ssb/ssb.h>
+-#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE)))
++#define BCM4710_DUMMY_RREG() bcm4710_dummy_rreg()
++
++static inline unsigned long bcm4710_dummy_rreg(void)
++{
++      return *(volatile unsigned long *)(KSEG1ADDR(SSB_ENUM_BASE));
++}
++
++#define BCM4710_FILL_TLB(addr) bcm4710_fill_tlb((void *)(addr))
++
++static inline unsigned long bcm4710_fill_tlb(void *addr)
++{
++      return *(unsigned long *)addr;
++}
++
++#define BCM4710_PROTECTED_FILL_TLB(addr) bcm4710_protected_fill_tlb((void *)(addr))
++
++static inline void bcm4710_protected_fill_tlb(void *addr)
++{
++      unsigned long x;
++      get_dbe(x, (unsigned long *)addr);;
++}
+ 
+-#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
+-#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
+ #else
+ #define BCM4710_DUMMY_RREG()
+ 
+--- a/arch/mips/mm/tlbex.c
++++ b/arch/mips/mm/tlbex.c
+@@ -973,6 +973,9 @@ build_get_pgde32(u32 **p, unsigned int t
+ #endif
+ 	uasm_i_addu(p, ptr, tmp, ptr);
+ #else
++#ifdef CONFIG_BCM47XX
++	uasm_i_nop(p);
++#endif
+ 	UASM_i_LA_mostly(p, ptr, pgdc);
+ #endif
+ 	uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
+@@ -1315,12 +1318,12 @@ static void __cpuinit build_r4000_tlb_re
+ 			/* No need for uasm_i_nop */
+ 		}
+ 
+-#ifdef CONFIG_BCM47XX
+-		uasm_i_nop(&p);
+-#endif
+ #ifdef CONFIG_64BIT
+ 		build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
+ #else
++# ifdef CONFIG_BCM47XX
++		uasm_i_nop(&p);
++# endif
+ 		build_get_pgde32(&p, K0, K1); /* get pgd in K1 */
+ #endif
+ 
+@@ -1332,6 +1335,9 @@ static void __cpuinit build_r4000_tlb_re
+ 		build_update_entries(&p, K0, K1);
+ 		build_tlb_write_entry(&p, &l, &r, tlb_random);
+ 		uasm_l_leave(&l, p);
++#ifdef CONFIG_BCM47XX
++		uasm_i_nop(&p);
++#endif
+ 		uasm_i_eret(&p); /* return from trap */
+ 	}
+ #ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
+@@ -1849,12 +1855,12 @@ build_r4000_tlbchange_handler_head(u32 *
+ {
+ 	struct work_registers wr = build_get_work_registers(p);
+ 
+-#ifdef CONFIG_BCM47XX
+-	uasm_i_nop(p);
+-#endif
+ #ifdef CONFIG_64BIT
+ 	build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */
+ #else
++# ifdef CONFIG_BCM47XX
++	uasm_i_nop(p);
++# endif
+ 	build_get_pgde32(p, wr.r1, wr.r2); /* get pgd in ptr */
+ #endif
+ 
+@@ -1893,6 +1899,9 @@ build_r4000_tlbchange_handler_tail(u32 *
+ 	build_tlb_write_entry(p, l, r, tlb_indexed);
+ 	uasm_l_leave(l, *p);
+ 	build_restore_work_registers(p);
++#ifdef CONFIG_BCM47XX
++	uasm_i_nop(p);
++#endif
+ 	uasm_i_eret(p); /* return from trap */
+ 
+ #ifdef CONFIG_64BIT
+--- a/arch/mips/kernel/genex.S
++++ b/arch/mips/kernel/genex.S
+@@ -21,6 +21,19 @@
+ #include <asm/war.h>
+ #include <asm/thread_info.h>
+ 
++#ifdef CONFIG_BCM47XX
++# ifdef eret
++#  undef eret
++# endif
++# define eret 					\
++	.set push;				\
++	.set noreorder;				\
++	 nop; 					\
++	 nop;					\
++	 eret;					\
++	.set pop;
++#endif
++
+ #define PANIC_PIC(msg)					\
+ 		.set push;				\
+ 		.set	reorder;			\
+@@ -53,7 +66,6 @@ NESTED(except_vec3_generic, 0, sp)
+ 	.set	noat
+ #ifdef CONFIG_BCM47XX
+ 	nop
+-	nop
+ #endif
+ #if R5432_CP0_INTERRUPT_WAR
+ 	mfc0	k0, CP0_INDEX
+@@ -78,6 +90,9 @@ NESTED(except_vec3_r4000, 0, sp)
+ 	.set	push
+ 	.set	mips3
+ 	.set	noat
++#ifdef CONFIG_BCM47XX
++	nop
++#endif
+ 	mfc0	k1, CP0_CAUSE
+ 	li	k0, 31<<2
+ 	andi	k1, k1, 0x7c
diff --git a/target/linux/brcm47xx/patches-3.9/940-bcm47xx-yenta.patch b/target/linux/brcm47xx/patches-3.9/940-bcm47xx-yenta.patch
new file mode 100644
index 0000000000..1739ff78ab
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/940-bcm47xx-yenta.patch
@@ -0,0 +1,46 @@
+--- a/drivers/pcmcia/yenta_socket.c
++++ b/drivers/pcmcia/yenta_socket.c
+@@ -920,6 +920,8 @@ static unsigned int yenta_probe_irq(stru
+ 	 * Probe for usable interrupts using the force
+ 	 * register to generate bogus card status events.
+ 	 */
++#ifndef CONFIG_BCM47XX
++	/* WRT54G3G does not like this */
+ 	cb_writel(socket, CB_SOCKET_EVENT, -1);
+ 	cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
+ 	reg = exca_readb(socket, I365_CSCINT);
+@@ -935,6 +937,7 @@ static unsigned int yenta_probe_irq(stru
+ 	}
+ 	cb_writel(socket, CB_SOCKET_MASK, 0);
+ 	exca_writeb(socket, I365_CSCINT, reg);
++#endif
+ 
+ 	mask = probe_irq_mask(val) & 0xffff;
+ 
+@@ -1019,6 +1022,10 @@ static void yenta_get_socket_capabilitie
+ 	else
+ 		socket->socket.irq_mask = 0;
+ 
++	/* irq mask probing is broken for the WRT54G3G */
++	if (socket->socket.irq_mask == 0)
++		socket->socket.irq_mask = 0x6f8;
++
+ 	dev_printk(KERN_INFO, &socket->dev->dev,
+ 		   "ISA IRQ mask 0x%04x, PCI irq %d\n",
+ 		   socket->socket.irq_mask, socket->cb_irq);
+@@ -1257,6 +1264,15 @@ static int yenta_probe(struct pci_dev *d
+ 	dev_printk(KERN_INFO, &dev->dev,
+ 		   "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
+ 
++	/* Generate an interrupt on card insert/remove */
++	config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
++
++	/* Set up Multifunction Routing Status Register */
++	config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
++
++	/* Switch interrupts to parallelized */
++	config_writeb(socket, 0x92, 0x64);
++
+ 	yenta_fixup_parent_bridge(dev->subordinate);
+ 
+ 	/* Register it with the pcmcia layer.. */
diff --git a/target/linux/brcm47xx/patches-3.9/976-ssb_increase_pci_delay.patch b/target/linux/brcm47xx/patches-3.9/976-ssb_increase_pci_delay.patch
new file mode 100644
index 0000000000..b56f1d5be3
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/976-ssb_increase_pci_delay.patch
@@ -0,0 +1,11 @@
+--- a/drivers/ssb/driver_pcicore.c
++++ b/drivers/ssb/driver_pcicore.c
+@@ -375,7 +375,7 @@ static void ssb_pcicore_init_hostmode(st
+ 	set_io_port_base(ssb_pcicore_controller.io_map_base);
+ 	/* Give some time to the PCI controller to configure itself with the new
+ 	 * values. Not waiting at this point causes crashes of the machine. */
+-	mdelay(10);
++	mdelay(300);
+ 	register_pci_controller(&ssb_pcicore_controller);
+ }
+ 
diff --git a/target/linux/brcm47xx/patches-3.9/980-wnr834b_no_cardbus_invariant.patch b/target/linux/brcm47xx/patches-3.9/980-wnr834b_no_cardbus_invariant.patch
new file mode 100644
index 0000000000..455067631a
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/980-wnr834b_no_cardbus_invariant.patch
@@ -0,0 +1,13 @@
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -120,6 +120,10 @@ static int bcm47xx_get_invariants(struct
+ 	if (bcm47xx_nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
+ 		iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
+ 
++	/* Do not indicate cardbus for Netgear WNR834B V1 and V2 */
++	if (iv->boardinfo.type == 0x0472 && iv->has_cardbus_slot)
++		iv->has_cardbus_slot = 0;
++
+ 	return 0;
+ }
+ 
diff --git a/target/linux/brcm47xx/patches-3.9/999-wl_exports.patch b/target/linux/brcm47xx/patches-3.9/999-wl_exports.patch
new file mode 100644
index 0000000000..d40f4670f6
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.9/999-wl_exports.patch
@@ -0,0 +1,22 @@
+--- a/arch/mips/bcm47xx/nvram.c
++++ b/arch/mips/bcm47xx/nvram.c
+@@ -21,7 +21,8 @@
+ #include <bcm47xx_nvram.h>
+ #include <asm/mach-bcm47xx/bcm47xx.h>
+ 
+-static char nvram_buf[NVRAM_SPACE];
++char nvram_buf[NVRAM_SPACE];
++EXPORT_SYMBOL(nvram_buf);
+ static int cfe_env;
+ extern char *cfe_env_get(char *nv_buf, const char *name);
+ 
+--- a/arch/mips/mm/cache.c
++++ b/arch/mips/mm/cache.c
+@@ -58,6 +58,7 @@ void (*_dma_cache_wback)(unsigned long s
+ void (*_dma_cache_inv)(unsigned long start, unsigned long size);
+ 
+ EXPORT_SYMBOL(_dma_cache_wback_inv);
++EXPORT_SYMBOL(_dma_cache_inv);
+ 
+ #endif /* CONFIG_DMA_NONCOHERENT */
+