imx6: update gw5400-a dts

- remove common imx6q-ventana.dtsi - there isn't enough commonality to
  warrent this
- rename user led's to 1-based
- add alises used by bootloader
- clean up iomux gpios
- fix pfuze slave address
- enable sata
- add delay after release of pci reset downstream from PCIe switch
- remove PCIe clock configuration as its now handled in updated driver

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38081

3 files changed, 103 insertions, 128 deletions

diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts
index ce30969c2e..f7ed236ebf 100644
--- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -10,16 +10,43 @@
  */
 
 /dts-v1/;
-#include "imx6q-ventana.dtsi"
+#include "imx6q.dtsi"
 
 / {
 	model = "Gateworks Ventana GW5400-A";
 	compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q";
 
+	/* these are used by bootloader for disabling nodes */
 	aliases {
 		ethernet0 = &fec;
 		ethernet1 = &eth1;
 		sky2 = &eth1;
+		ssi0 = &ssi1;
+		ssi1 = &ssi2;
+		ipu0 = &ipu1;
+		ipu1 = &ipu2;
+		usdhc0 = &usdhc1;
+		usdhc1 = &usdhc2;
+		usdhc2 = &usdhc3;
+		usdhc3 = &usdhc4;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		usb0 = &usbh3;
+		usb1 = &usbotg;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		spi3 = &ecspi4;
+		spi4 = &ecspi5;
+		pwm0 = &pwm1;
+		pwm1 = &pwm2;
+		pwm2 = &pwm3;
+		pwm3 = &pwm4;
+		can0 = &can1;
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
 	};
 
 	/* SDRAM addressing */
@@ -34,20 +61,23 @@
 	leds {
 		compatible = "gpio-leds";
 
-		led0: user0 {
-			label = "user0";
-			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG# */
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user1 {
-			label = "user1";
-			gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR# */
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR */
+			default-state = "off";
 		};
 
-		led2: user2 {
-			label = "user2";
-			gpios = <&gpio4 15 0>; /* 111 -> MX6_LOCLEDR# */
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
+			default-state = "off";
 		};
 	};
 
@@ -102,34 +132,23 @@
 	hog {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-				/* USB OTG Power Enable */
-				MX6Q_PAD_EIM_D22__GPIO3_IO22   0x80000000
-
-				/*  3:19 SPINOR_CS0# */
-				MX6Q_PAD_EIM_D19__GPIO3_IO19   0x80000000
-
-				/*  1:09 MX6_DIO0 (could also be PWM1_PWM0) */
-				MX6Q_PAD_GPIO_9__GPIO1_IO09    0x80000000
-				/*  1:19 MX6_DIO1 (could also be PWM2_PWM0) */
-				MX6Q_PAD_SD1_DAT2__GPIO1_IO19  0x80000000
-				/*  2:09 MX6_DIO2 (could also be PWM3_PWM0) */
-				MX6Q_PAD_SD4_DAT1__GPIO2_IO09  0x80000000
-				/*  2:10 MX6_DIO3 (could also be PWM3_PWM0) */
-				MX6Q_PAD_SD4_DAT2__GPIO2_IO10  0x80000000
-
-				/*  1:16 USBHUB_RST# */
-				MX6Q_PAD_SD1_DAT0__GPIO1_IO16   0x80000000
-
-				/* PCIE IRQ */
-				MX6Q_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000
-				/* PCIE RST */
-				MX6Q_PAD_ENET_TXD1__GPIO1_IO29  0x08000000
-
-				/*  1:12 MIPI_DIO */
-				MX6Q_PAD_SD1_DAT3__GPIO1_IO21   0x80000000
-
-				/*  AUD4_MCK */
-				MX6Q_PAD_GPIO_0__CCM_CLKO1      0x80000000
+				MX6Q_PAD_EIM_D22__GPIO3_IO22    0x80000000 /* OTG_PWR_EN */
+				MX6Q_PAD_EIM_D19__GPIO3_IO19    0x80000000 /* SPINOR_CS0# */
+				MX6Q_PAD_KEY_COL0__GPIO4_IO06   0x80000000 /* user0 led */
+				MX6Q_PAD_KEY_COL2__GPIO4_IO10   0x80000000 /* user1 led */
+				MX6Q_PAD_KEY_ROW4__GPIO4_IO15   0x80000000 /* user2 led */
+/* let bootloader choose these based on hwconfig */
+#if 0
+				MX6Q_PAD_GPIO_9__GPIO1_IO09     0x80000000 /* MX6_DIO0 (or PWM1_PWM0) */
+				MX6Q_PAD_SD1_DAT2__GPIO1_IO19   0x80000000 /* MX6_DIO1 (or PWM2_PWM0) */
+				MX6Q_PAD_SD4_DAT1__GPIO2_IO09   0x80000000 /* MX6_DIO2 (or PWM3_PWM0) */
+				MX6Q_PAD_SD4_DAT2__GPIO2_IO10   0x80000000 /* MX6_DIO3 (or PWM3_PWM0) */
+#endif
+				MX6Q_PAD_SD1_DAT0__GPIO1_IO16   0x80000000 /* USBHUB_RST# */
+				MX6Q_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
+				MX6Q_PAD_ENET_TXD1__GPIO1_IO29  0x08000000 /* PCIE RST */
+				MX6Q_PAD_SD1_DAT3__GPIO1_IO21   0x80000000 /* MIPI_DIO */
+				MX6Q_PAD_GPIO_0__CCM_CLKO1      0x80000000 /* AUD4_MCK */
 			 >;
 		};
 	};
@@ -262,7 +281,6 @@
 &can1 {
 	reg = <0x02090000 0x4000>;
 	interrupts = <0 110 0x04>;
-	//clock-frequency
 	status = "okay";
 };
 
@@ -271,7 +289,7 @@
 };
 
 &pcie {
-	reset-gpios = <&gpio1 29 0>;
+	reset-gpio = <&gpio1 29 0>;
 	status = "okay";
 
 	eth1: sky2@8 { /* MAC/PHY on bus 8 */
@@ -365,7 +383,7 @@
 
 	pmic: pfuze@08 {
 		compatible = "fsl,pfuze100";
-		reg = <0x0a>;
+		reg = <0x08>;
 	};
 
 	pciswitch: pex8609@3f {
@@ -426,3 +444,7 @@
 		crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
 	};
 };
+
+&sata {
+	status = "okay";
+};
diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-ventana.dtsi b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-ventana.dtsi
deleted file mode 100644
index 7cebdba1ea..0000000000
--- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-ventana.dtsi
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright 2013 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "imx6q.dtsi"
-
-/ {
-	model = "Gateworks Ventana";
-	system-serial = "";
-
-	// these are used by bootloader for disabling nodes
-	aliases {
-		// ethernet0 = &eth0;
-		// ethernet1 = &eth1;
-		ssi0 = &ssi1;
-		ssi1 = &ssi2;
-		ipu0 = &ipu1;
-		ipu1 = &ipu2;
-		// mipi_csi = &mipi_csi;
-		// mipi_dsi = &mipi_dsi;
-		usdhc0 = &usdhc1;
-		usdhc1 = &usdhc2;
-		usdhc2 = &usdhc3;
-		usdhc3 = &usdhc4;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		usb0 = &usbh3;
-		usb1 = &usbotg;
-		spi0 = &ecspi1;
-		spi1 = &ecspi2;
-		spi2 = &ecspi3;
-		spi3 = &ecspi4;
-		spi4 = &ecspi5;
-		pwm0 = &pwm1;
-		pwm1 = &pwm2;
-		pwm2 = &pwm3;
-		pwm3 = &pwm4;
-		can0 = &can1;
-		led0 = &led0;
-		led1 = &led1;
-		led2 = &led2;
-	};
-};
diff --git a/target/linux/imx6/patches-3.10/110-gw5400-a.patch b/target/linux/imx6/patches-3.10/110-gw5400-a.patch
index ac0721d925..e554540dad 100644
--- a/target/linux/imx6/patches-3.10/110-gw5400-a.patch
+++ b/target/linux/imx6/patches-3.10/110-gw5400-a.patch
@@ -25,7 +25,38 @@
  				};
  
  				ecspi1 {
-@@ -205,6 +213,12 @@
+@@ -187,6 +195,30 @@
+ 							MX6Q_PAD_SD4_DAT0__NAND_DQS      0x00b1
+ 						>;
+ 					};
++
++					/* No strobe */
++					pinctrl_gpmi_nand_2: gpmi-nand-2 {
++						fsl,pins = <
++							MX6Q_PAD_NANDF_CLE__NAND_CLE     0xb0b1
++							MX6Q_PAD_NANDF_ALE__NAND_ALE     0xb0b1
++							MX6Q_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
++							MX6Q_PAD_NANDF_RB0__NAND_READY_B 0xb000
++							MX6Q_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
++							MX6Q_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
++							MX6Q_PAD_NANDF_CS2__NAND_CE2_B   0xb0b1
++							MX6Q_PAD_NANDF_CS3__NAND_CE3_B   0xb0b1
++							MX6Q_PAD_SD4_CMD__NAND_RE_B      0xb0b1
++							MX6Q_PAD_SD4_CLK__NAND_WE_B      0xb0b1
++							MX6Q_PAD_NANDF_D0__NAND_DATA00   0xb0b1
++							MX6Q_PAD_NANDF_D1__NAND_DATA01   0xb0b1
++							MX6Q_PAD_NANDF_D2__NAND_DATA02   0xb0b1
++							MX6Q_PAD_NANDF_D3__NAND_DATA03   0xb0b1
++							MX6Q_PAD_NANDF_D4__NAND_DATA04   0xb0b1
++							MX6Q_PAD_NANDF_D5__NAND_DATA05   0xb0b1
++							MX6Q_PAD_NANDF_D6__NAND_DATA06   0xb0b1
++							MX6Q_PAD_NANDF_D7__NAND_DATA07   0xb0b1
++						>;
++					};
+ 				};
+ 
+ 				i2c1 {
+@@ -205,6 +237,12 @@
  							MX6Q_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
  						>;
  					};
@@ -38,7 +69,7 @@
  				};
  
  				i2c3 {
-@@ -214,6 +228,12 @@
+@@ -214,6 +252,12 @@
  							MX6Q_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
  						>;
  					};
@@ -51,7 +82,7 @@
  				};
  
  				uart1 {
-@@ -223,6 +243,12 @@
+@@ -223,6 +267,12 @@
  							MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
  						>;
  					};
@@ -64,7 +95,7 @@
  				};
  
  				uart2 {
-@@ -232,6 +258,21 @@
+@@ -232,6 +282,21 @@
  							MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
  						>;
  					};
@@ -86,7 +117,7 @@
  				};
  
  				uart4 {
-@@ -242,6 +283,15 @@
+@@ -242,6 +307,15 @@
  						>;
  					};
  				};
@@ -112,7 +143,7 @@
  #include <linux/phy.h>
  #include <linux/regmap.h>
  #include <linux/micrel_phy.h>
-@@ -145,6 +146,65 @@ static void __init imx6q_sabrelite_init(
+@@ -145,6 +146,38 @@ static void __init imx6q_sabrelite_init(
  	imx6q_sabrelite_cko1_setup();
  }
  
@@ -137,48 +168,21 @@
 +	pci_read_config_dword(dev, 0x644, &dw);
 +	dw |= 0xfe;   // GPIO1-7 output high
 +	pci_write_config_dword(dev, 0x644, dw);
++
++	mdelay(1);
 +}
 +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609,
 +	mx6_ventana_pciesw_early_fixup);
 +
-+/*
-+ * configure PCIe core clock and PCIe ref clock
-+ *
-+ * TODO: disable CLK1 output and use CLK2 input from si52147 as PCIe ref
-+ */
-+static void __init imx6q_ventana_pcie_setup(void)
-+{
-+	struct clk *axi_sel, *axi, *ref;
-+
-+	axi_sel = clk_get_sys(NULL, "pcie_axi_sel");
-+	axi = clk_get_sys(NULL, "axi");
-+	ref = clk_get_sys(NULL, "pcie_ref_125m");
-+	if (IS_ERR(axi_sel) || IS_ERR(axi) || IS_ERR(ref)) {
-+		pr_err("pcie setup failed - can't get clocks\n");
-+		goto put_clk;
-+	}
-+	clk_set_parent(axi_sel, axi);
-+	clk_prepare_enable(ref);
-+
-+put_clk:
-+	if (!IS_ERR(axi_sel))
-+		clk_put(axi_sel);
-+	if (!IS_ERR(axi))
-+		clk_put(axi);
-+	if (!IS_ERR(ref))
-+		clk_put(ref);
-+}
-+
 +static void __init imx6q_ventana_init(void)
 +{
-+	imx6q_ventana_pcie_setup();
 +	imx6q_sabrelite_cko1_setup();
 +}
 +
  static void __init imx6q_1588_init(void)
  {
  	struct regmap *gpr;
-@@ -163,6 +223,9 @@ static void __init imx6q_usb_init(void)
+@@ -163,6 +196,9 @@ static void __init imx6q_usb_init(void)
  
  static void __init imx6q_init_machine(void)
  {