ixp4xx: clean up patches, fold the 2.6.37 update patch into the relevant board support patches

SVN-Revision: 25727

16 files changed, 32 insertions, 186 deletions

diff --git a/target/linux/ixp4xx/patches-2.6.37/105-wg302v1_support.patch b/target/linux/ixp4xx/patches-2.6.37/105-wg302v1_support.patch
index 6e12caa440..4d2e4a1d34 100644
--- a/target/linux/ixp4xx/patches-2.6.37/105-wg302v1_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.37/105-wg302v1_support.patch
@@ -112,7 +112,7 @@
 +subsys_initcall(wg302v1_pci_init);
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
-@@ -0,0 +1,142 @@
+@@ -0,0 +1,140 @@
 +/*
 + * arch/arm/mach-ixp4xx/wg302v1-setup.c
 + *
@@ -246,8 +246,6 @@
 +#ifdef CONFIG_MACH_WG302V1
 +MACHINE_START(WG302V1, "Netgear WG302 v1 / WAG302 v1")
 +	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 +	.map_io		= ixp4xx_map_io,
 +	.init_irq	= ixp4xx_init_irq,
 +	.timer		= &ixp4xx_timer,
diff --git a/target/linux/ixp4xx/patches-2.6.37/110-pronghorn_series_support.patch b/target/linux/ixp4xx/patches-2.6.37/110-pronghorn_series_support.patch
index f3e088b4a0..805dedc111 100644
--- a/target/linux/ixp4xx/patches-2.6.37/110-pronghorn_series_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.37/110-pronghorn_series_support.patch
@@ -19,7 +19,7 @@
 +	bool "ADI Pronghorn series"
 +	select PCI
 +	help
-+	  Say 'Y' here if you want your kernel to support the ADI 
++	  Say 'Y' here if you want your kernel to support the ADI
 +	  Engineering Pronghorn series. For more
 +	  information on this platform, see http://www.adiengineering.com
 +
@@ -127,7 +127,7 @@
 +subsys_initcall(pronghorn_pci_init);
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/pronghorn-setup.c
-@@ -0,0 +1,245 @@
+@@ -0,0 +1,241 @@
 +/*
 + * arch/arm/mach-ixp4xx/pronghorn-setup.c
 + *
@@ -354,8 +354,6 @@
 +
 +MACHINE_START(PRONGHORN, "ADI Engineering Pronghorn")
 +	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 +	.map_io		= ixp4xx_map_io,
 +	.init_irq	= ixp4xx_init_irq,
 +	.timer		= &ixp4xx_timer,
@@ -365,8 +363,6 @@
 +
 +MACHINE_START(PRONGHORNMETRO, "ADI Engineering Pronghorn Metro")
 +	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 +	.map_io		= ixp4xx_map_io,
 +	.init_irq	= ixp4xx_init_irq,
 +	.timer		= &ixp4xx_timer,
diff --git a/target/linux/ixp4xx/patches-2.6.37/115-sidewinder_support.patch b/target/linux/ixp4xx/patches-2.6.37/115-sidewinder_support.patch
index 2ec3d95117..6ccedd5304 100644
--- a/target/linux/ixp4xx/patches-2.6.37/115-sidewinder_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.37/115-sidewinder_support.patch
@@ -130,7 +130,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
 +subsys_initcall(sidewinder_pci_init);
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/sidewinder-setup.c
-@@ -0,0 +1,149 @@
+@@ -0,0 +1,147 @@
 +/*
 + * arch/arm/mach-ixp4xx/sidewinder-setup.c
 + *
@@ -272,8 +272,6 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
 +
 +MACHINE_START(SIDEWINDER, "ADI Engineering Sidewinder")
 +	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 +	.map_io		= ixp4xx_map_io,
 +	.init_irq	= ixp4xx_init_irq,
 +	.timer		= &ixp4xx_timer,
diff --git a/target/linux/ixp4xx/patches-2.6.37/120-compex_support.patch b/target/linux/ixp4xx/patches-2.6.37/120-compex_support.patch
index c549314957..b11ffd975c 100644
--- a/target/linux/ixp4xx/patches-2.6.37/120-compex_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.37/120-compex_support.patch
@@ -50,7 +50,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
  obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/compex-setup.c
-@@ -0,0 +1,136 @@
+@@ -0,0 +1,134 @@
 +/*
 + * arch/arm/mach-ixp4xx/compex-setup.c
 + *
@@ -179,8 +179,6 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
 +
 +MACHINE_START(COMPEX, "Compex WP18 / NP18A")
 +	/* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
-+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 +	.map_io		= ixp4xx_map_io,
 +	.init_irq	= ixp4xx_init_irq,
 +	.timer		= &ixp4xx_timer,
diff --git a/target/linux/ixp4xx/patches-2.6.37/130-wrt300nv2_support.patch b/target/linux/ixp4xx/patches-2.6.37/130-wrt300nv2_support.patch
index 865bb9d972..4e84e7aac7 100644
--- a/target/linux/ixp4xx/patches-2.6.37/130-wrt300nv2_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.37/130-wrt300nv2_support.patch
@@ -103,7 +103,7 @@
 +subsys_initcall(wrt300nv2_pci_init);
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -0,0 +1,108 @@
+@@ -0,0 +1,106 @@
 +/*
 + * arch/arm/mach-ixp4xx/wrt300nv2-setup.c
 + *
@@ -203,8 +203,6 @@
 +#ifdef CONFIG_MACH_WRT300NV2
 +MACHINE_START(WRT300NV2, "Linksys WRT300N v2")
 +	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 +	.map_io		= ixp4xx_map_io,
 +	.init_irq	= ixp4xx_init_irq,
 +	.timer		= &ixp4xx_timer,
diff --git a/target/linux/ixp4xx/patches-2.6.37/150-lanready_ap1000_support.patch b/target/linux/ixp4xx/patches-2.6.37/150-lanready_ap1000_support.patch
index 16f19baf23..8b7c98eb73 100644
--- a/target/linux/ixp4xx/patches-2.6.37/150-lanready_ap1000_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.37/150-lanready_ap1000_support.patch
@@ -1,6 +1,6 @@
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/ap1000-setup.c
-@@ -0,0 +1,151 @@
+@@ -0,0 +1,149 @@
 +/*
 + * arch/arm/mach-ixp4xx/ap1000-setup.c
 + *
@@ -142,8 +142,6 @@
 +#ifdef CONFIG_MACH_AP1000
 +MACHINE_START(AP1000, "Lanready AP-1000")
 +	/* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
-+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 +	.fixup		= ap1000_fixup,
 +	.map_io		= ixp4xx_map_io,
 +	.init_irq	= ixp4xx_init_irq,
diff --git a/target/linux/ixp4xx/patches-2.6.37/162-wg302v1_mem_fixup.patch b/target/linux/ixp4xx/patches-2.6.37/162-wg302v1_mem_fixup.patch
index 684db44751..e84ce9b582 100644
--- a/target/linux/ixp4xx/patches-2.6.37/162-wg302v1_mem_fixup.patch
+++ b/target/linux/ixp4xx/patches-2.6.37/162-wg302v1_mem_fixup.patch
@@ -37,10 +37,10 @@
  static void __init wg302v1_init(void)
  {
  	ixp4xx_sys_init();
-@@ -133,6 +163,7 @@ MACHINE_START(WG302V1, "Netgear WG302 v1
+@@ -131,6 +161,7 @@ static void __init wg302v1_init(void)
+ #ifdef CONFIG_MACH_WG302V1
+ MACHINE_START(WG302V1, "Netgear WG302 v1 / WAG302 v1")
  	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
- 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
- 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 +	.fixup		= wg302v1_fixup,
  	.map_io		= ixp4xx_map_io,
  	.init_irq	= ixp4xx_init_irq,
diff --git a/target/linux/ixp4xx/patches-2.6.37/180-tw5334_support.patch b/target/linux/ixp4xx/patches-2.6.37/180-tw5334_support.patch
index e92d4614a0..d609cd7d4b 100644
--- a/target/linux/ixp4xx/patches-2.6.37/180-tw5334_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.37/180-tw5334_support.patch
@@ -35,7 +35,7 @@
  obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/tw5334-setup.c
-@@ -0,0 +1,163 @@
+@@ -0,0 +1,161 @@
 +/*
 + * arch/arm/mach-ixp4xx/tw5334-setup.c
 + *
@@ -190,8 +190,6 @@
 +#ifdef CONFIG_MACH_TW5334
 +MACHINE_START(TW5334, "Titan Wireless TW-533-4")
 +	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 +	.map_io		= ixp4xx_map_io,
 +	.init_irq	= ixp4xx_init_irq,
 +	.timer		= &ixp4xx_timer,
diff --git a/target/linux/ixp4xx/patches-2.6.37/185-mi424wr_support.patch b/target/linux/ixp4xx/patches-2.6.37/185-mi424wr_support.patch
index d85d3d1132..85c3e64263 100644
--- a/target/linux/ixp4xx/patches-2.6.37/185-mi424wr_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.37/185-mi424wr_support.patch
@@ -74,7 +74,7 @@
 +
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/mi424wr-setup.c
-@@ -0,0 +1,344 @@
+@@ -0,0 +1,342 @@
 +/*
 + * arch/arm/mach-ixp4xx/mi424wr-setup.c
 + *
@@ -410,8 +410,6 @@
 +
 +MACHINE_START(MI424WR, "Actiontec MI424WR")
 +	/* Maintainer: Jose Vasconcellos */
-+	.phys_io	= IXP4XX_UART2_BASE_PHYS,
-+	.io_pg_offst	= ((IXP4XX_UART2_BASE_VIRT) >> 18) & 0xfffc,
 +	.map_io		= ixp4xx_map_io,
 +	.init_irq	= ixp4xx_init_irq,
 +	.timer		= &ixp4xx_timer,
diff --git a/target/linux/ixp4xx/patches-2.6.37/190-cambria_support.patch b/target/linux/ixp4xx/patches-2.6.37/190-cambria_support.patch
index 683d8be68a..32199d8c31 100644
--- a/target/linux/ixp4xx/patches-2.6.37/190-cambria_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.37/190-cambria_support.patch
@@ -77,7 +77,7 @@
 +subsys_initcall(cambria_pci_init);
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/cambria-setup.c
-@@ -0,0 +1,429 @@
+@@ -0,0 +1,427 @@
 +/*
 + * arch/arm/mach-ixp4xx/cambria-setup.c
 + *
@@ -499,8 +499,6 @@
 +
 +MACHINE_START(CAMBRIA, "Gateworks Cambria series")
 +	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 +	.map_io		= ixp4xx_map_io,
 +	.init_irq	= ixp4xx_init_irq,
 +	.timer		= &ixp4xx_timer,
diff --git a/target/linux/ixp4xx/patches-2.6.37/191-cambria_optional_uart.patch b/target/linux/ixp4xx/patches-2.6.37/191-cambria_optional_uart.patch
index 099980b80a..603cf3cc66 100644
--- a/target/linux/ixp4xx/patches-2.6.37/191-cambria_optional_uart.patch
+++ b/target/linux/ixp4xx/patches-2.6.37/191-cambria_optional_uart.patch
@@ -124,7 +124,7 @@
  	unsigned int		custom_divisor;
 --- a/drivers/serial/8250.c
 +++ b/drivers/serial/8250.c
-@@ -412,6 +412,20 @@ static void mem_serial_out(struct uart_p
+@@ -413,6 +413,20 @@ static void mem_serial_out(struct uart_p
  	writeb(value, p->membase + offset);
  }
  
@@ -145,7 +145,7 @@
  static void mem32_serial_out(struct uart_port *p, int offset, int value)
  {
  	offset = map_8250_out_reg(p, offset) << p->regshift;
-@@ -503,6 +517,11 @@ static void set_io_from_upio(struct uart
+@@ -504,6 +518,11 @@ static void set_io_from_upio(struct uart
  		p->serial_out = mem32_serial_out;
  		break;
  
@@ -157,7 +157,7 @@
  	case UPIO_AU:
  		p->serial_in = au_serial_in;
  		p->serial_out = au_serial_out;
-@@ -534,6 +553,7 @@ serial_out_sync(struct uart_8250_port *u
+@@ -535,6 +554,7 @@ serial_out_sync(struct uart_8250_port *u
  	switch (p->iotype) {
  	case UPIO_MEM:
  	case UPIO_MEM32:
@@ -165,7 +165,7 @@
  	case UPIO_AU:
  	case UPIO_DWAPB:
  		p->serial_out(p, offset, value);
-@@ -2476,6 +2496,7 @@ static int serial8250_request_std_resour
+@@ -2477,6 +2497,7 @@ static int serial8250_request_std_resour
  	case UPIO_MEM32:
  	case UPIO_MEM:
  	case UPIO_DWAPB:
@@ -173,7 +173,7 @@
  		if (!up->port.mapbase)
  			break;
  
-@@ -2513,6 +2534,7 @@ static void serial8250_release_std_resou
+@@ -2514,6 +2535,7 @@ static void serial8250_release_std_resou
  	case UPIO_MEM32:
  	case UPIO_MEM:
  	case UPIO_DWAPB:
@@ -181,7 +181,7 @@
  		if (!up->port.mapbase)
  			break;
  
-@@ -3024,6 +3046,7 @@ static int __devinit serial8250_probe(st
+@@ -3025,6 +3047,7 @@ static int __devinit serial8250_probe(st
  		port.set_termios	= p->set_termios;
  		port.pm			= p->pm;
  		port.dev		= &dev->dev;
@@ -189,7 +189,7 @@
  		port.irqflags		|= irqflag;
  		ret = serial8250_register_port(&port);
  		if (ret < 0) {
-@@ -3173,6 +3196,7 @@ int serial8250_register_port(struct uart
+@@ -3174,6 +3197,7 @@ int serial8250_register_port(struct uart
  		uart->port.iotype       = port->iotype;
  		uart->port.flags        = port->flags | UPF_BOOT_AUTOCONF;
  		uart->port.mapbase      = port->mapbase;
@@ -199,7 +199,7 @@
  			uart->port.dev = port->dev;
 --- a/drivers/serial/serial_core.c
 +++ b/drivers/serial/serial_core.c
-@@ -2130,6 +2130,7 @@ uart_report_port(struct uart_driver *drv
+@@ -2129,6 +2129,7 @@ uart_report_port(struct uart_driver *drv
  		snprintf(address, sizeof(address),
  			 "I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
  		break;
@@ -207,7 +207,7 @@
  	case UPIO_MEM:
  	case UPIO_MEM32:
  	case UPIO_AU:
-@@ -2550,6 +2551,7 @@ int uart_match_port(struct uart_port *po
+@@ -2549,6 +2550,7 @@ int uart_match_port(struct uart_port *po
  	case UPIO_HUB6:
  		return (port1->iobase == port2->iobase) &&
  		       (port1->hub6   == port2->hub6);
diff --git a/target/linux/ixp4xx/patches-2.6.37/193-cambria_pld_gpio.patch b/target/linux/ixp4xx/patches-2.6.37/193-cambria_pld_gpio.patch
index 171898d6c7..299630f171 100644
--- a/target/linux/ixp4xx/patches-2.6.37/193-cambria_pld_gpio.patch
+++ b/target/linux/ixp4xx/patches-2.6.37/193-cambria_pld_gpio.patch
@@ -90,7 +90,7 @@
  }
  
  static struct cambria_board_info cambria_boards[] __initdata = {
-@@ -460,6 +507,14 @@ static struct i2c_board_info __initdata
+@@ -460,6 +507,14 @@ static struct i2c_board_info __initdata 
  		I2C_BOARD_INFO("24c08", 0x51),
  		.platform_data	= &cambria_eeprom_info
  	},
diff --git a/target/linux/ixp4xx/patches-2.6.37/295-latch_led_driver.patch b/target/linux/ixp4xx/patches-2.6.37/295-latch_led_driver.patch
index 1dc2690ac1..4d399f75dc 100644
--- a/target/linux/ixp4xx/patches-2.6.37/295-latch_led_driver.patch
+++ b/target/linux/ixp4xx/patches-2.6.37/295-latch_led_driver.patch
@@ -1,8 +1,8 @@
 --- a/drivers/leds/Kconfig
 +++ b/drivers/leds/Kconfig
-@@ -176,6 +176,13 @@ config LEDS_LP3944
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called leds-lp3944.
+@@ -210,6 +210,13 @@ config LEDS_LP5523
+ 	  Driver provides direct control via LED class and interface for
+ 	  programming the engines.
  
 +config LEDS_LATCH
 +	tristate "LED Support for Memory Latched LEDs"
@@ -13,7 +13,7 @@
 +
  config LEDS_CLEVO_MAIL
  	tristate "Mail LED on Clevo notebook"
- 	depends on X86 && SERIO_I8042 && DMI
+ 	depends on LEDS_CLASS
 --- /dev/null
 +++ b/drivers/leds/leds-latch.c
 @@ -0,0 +1,150 @@
@@ -175,11 +175,11 @@
  obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
 +obj-$(CONFIG_LEDS_LATCH)		+= leds-latch.o
  obj-$(CONFIG_LEDS_LP3944)		+= leds-lp3944.o
- obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-clevo-mail.o
- obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.o
+ obj-$(CONFIG_LEDS_LP5521)		+= leds-lp5521.o
+ obj-$(CONFIG_LEDS_LP5523)		+= leds-lp5523.o
 --- a/include/linux/leds.h
 +++ b/include/linux/leds.h
-@@ -165,5 +165,19 @@ struct gpio_led_platform_data {
+@@ -204,5 +204,19 @@ struct gpio_led_platform_data {
  					unsigned long *delay_off);
  };
  
diff --git a/target/linux/ixp4xx/patches-2.6.37/500-usr8200_support.patch b/target/linux/ixp4xx/patches-2.6.37/500-usr8200_support.patch
index e757ff301c..3c32295947 100644
--- a/target/linux/ixp4xx/patches-2.6.37/500-usr8200_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.37/500-usr8200_support.patch
@@ -116,7 +116,7 @@
 +subsys_initcall(usr8200_pci_init);
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/usr8200-setup.c
-@@ -0,0 +1,212 @@
+@@ -0,0 +1,210 @@
 +/*
 + * arch/arm/mach-ixp4xx/usr8200-setup.c
 + *
@@ -321,8 +321,6 @@
 +
 +MACHINE_START(USR8200, "USRobotics USR8200")
 +	/* Maintainer: Peter Denison <openwrt@marshadder.org> */
-+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 +	.map_io		= ixp4xx_map_io,
 +	.init_irq	= ixp4xx_init_irq,
 +	.timer		= &ixp4xx_timer,
diff --git a/target/linux/ixp4xx/patches-2.6.37/520-tw2662_support.patch b/target/linux/ixp4xx/patches-2.6.37/520-tw2662_support.patch
index 3fde579c10..8b50b90cb4 100644
--- a/target/linux/ixp4xx/patches-2.6.37/520-tw2662_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.37/520-tw2662_support.patch
@@ -118,7 +118,7 @@
 +subsys_initcall(tw2662_pci_init);
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/tw2662-setup.c
-@@ -0,0 +1,212 @@
+@@ -0,0 +1,210 @@
 +/*
 + * arch/arm/mach-ixp4xx/tw2662-setup.c
 + *
@@ -321,8 +321,6 @@
 +#ifdef CONFIG_MACH_TW2662
 +MACHINE_START(TW2662, "Titan Wireless TW-266-2")
 +	/* Maintainer: Alexandros C. Couloumbis <alex@ozo.com> */
-+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 +	.fixup		= tw2662_fixup,
 +	.map_io		= ixp4xx_map_io,
 +	.init_irq	= ixp4xx_init_irq,
diff --git a/target/linux/ixp4xx/patches-2.6.37/601_arm_2.6.37_update.patch b/target/linux/ixp4xx/patches-2.6.37/601_arm_2.6.37_update.patch
deleted file mode 100644
index 76b6a3e97c..0000000000
--- a/target/linux/ixp4xx/patches-2.6.37/601_arm_2.6.37_update.patch
+++ /dev/null
@@ -1,130 +0,0 @@
---- a/arch/arm/mach-ixp4xx/ap1000-setup.c
-+++ b/arch/arm/mach-ixp4xx/ap1000-setup.c
-@@ -167,8 +167,6 @@ static void __init ap1000_init(void)
- #ifdef CONFIG_MACH_AP1000
- MACHINE_START(AP1000, "Lanready AP-1000")
- 	/* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
--	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
--	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
- 	.fixup		= ap1000_fixup,
- 	.map_io		= ixp4xx_map_io,
- 	.init_irq	= ixp4xx_init_irq,
---- a/arch/arm/mach-ixp4xx/cambria-setup.c
-+++ b/arch/arm/mach-ixp4xx/cambria-setup.c
-@@ -563,8 +563,6 @@ late_initcall(cambria_model_setup);
- 
- MACHINE_START(CAMBRIA, "Gateworks Cambria series")
- 	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
--	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
--	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
- 	.map_io		= ixp4xx_map_io,
- 	.init_irq	= ixp4xx_init_irq,
- 	.timer		= &ixp4xx_timer,
---- a/arch/arm/mach-ixp4xx/compex-setup.c
-+++ b/arch/arm/mach-ixp4xx/compex-setup.c
-@@ -126,8 +126,6 @@ static void __init compex_init(void)
- 
- MACHINE_START(COMPEX, "Compex WP18 / NP18A")
- 	/* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
--	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
--	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
- 	.map_io		= ixp4xx_map_io,
- 	.init_irq	= ixp4xx_init_irq,
- 	.timer		= &ixp4xx_timer,
---- a/arch/arm/mach-ixp4xx/mi424wr-setup.c
-+++ b/arch/arm/mach-ixp4xx/mi424wr-setup.c
-@@ -333,8 +333,6 @@ static void __init mi424wr_init(void)
- 
- MACHINE_START(MI424WR, "Actiontec MI424WR")
- 	/* Maintainer: Jose Vasconcellos */
--	.phys_io	= IXP4XX_UART2_BASE_PHYS,
--	.io_pg_offst	= ((IXP4XX_UART2_BASE_VIRT) >> 18) & 0xfffc,
- 	.map_io		= ixp4xx_map_io,
- 	.init_irq	= ixp4xx_init_irq,
- 	.timer		= &ixp4xx_timer,
---- a/arch/arm/mach-ixp4xx/pronghorn-setup.c
-+++ b/arch/arm/mach-ixp4xx/pronghorn-setup.c
-@@ -224,8 +224,6 @@ static void __init pronghorn_init(void)
- 
- MACHINE_START(PRONGHORN, "ADI Engineering Pronghorn")
- 	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
--	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
--	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
- 	.map_io		= ixp4xx_map_io,
- 	.init_irq	= ixp4xx_init_irq,
- 	.timer		= &ixp4xx_timer,
-@@ -235,8 +233,6 @@ MACHINE_END
- 
- MACHINE_START(PRONGHORNMETRO, "ADI Engineering Pronghorn Metro")
- 	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
--	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
--	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
- 	.map_io		= ixp4xx_map_io,
- 	.init_irq	= ixp4xx_init_irq,
- 	.timer		= &ixp4xx_timer,
---- a/arch/arm/mach-ixp4xx/sidewinder-setup.c
-+++ b/arch/arm/mach-ixp4xx/sidewinder-setup.c
-@@ -139,8 +139,6 @@ static void __init sidewinder_init(void)
- 
- MACHINE_START(SIDEWINDER, "ADI Engineering Sidewinder")
- 	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
--	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
--	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
- 	.map_io		= ixp4xx_map_io,
- 	.init_irq	= ixp4xx_init_irq,
- 	.timer		= &ixp4xx_timer,
---- a/arch/arm/mach-ixp4xx/tw2662-setup.c
-+++ b/arch/arm/mach-ixp4xx/tw2662-setup.c
-@@ -200,8 +200,6 @@ static void __init tw2662_init(void)
- #ifdef CONFIG_MACH_TW2662
- MACHINE_START(TW2662, "Titan Wireless TW-266-2")
- 	/* Maintainer: Alexandros C. Couloumbis <alex@ozo.com> */
--	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
--	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
- 	.fixup		= tw2662_fixup,
- 	.map_io		= ixp4xx_map_io,
- 	.init_irq	= ixp4xx_init_irq,
---- a/arch/arm/mach-ixp4xx/tw5334-setup.c
-+++ b/arch/arm/mach-ixp4xx/tw5334-setup.c
-@@ -152,8 +152,6 @@ static void __init tw5334_init(void)
- #ifdef CONFIG_MACH_TW5334
- MACHINE_START(TW5334, "Titan Wireless TW-533-4")
- 	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
--	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
--	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
- 	.map_io		= ixp4xx_map_io,
- 	.init_irq	= ixp4xx_init_irq,
- 	.timer		= &ixp4xx_timer,
---- a/arch/arm/mach-ixp4xx/usr8200-setup.c
-+++ b/arch/arm/mach-ixp4xx/usr8200-setup.c
-@@ -202,8 +202,6 @@ static void __init usr8200_init(void)
- 
- MACHINE_START(USR8200, "USRobotics USR8200")
- 	/* Maintainer: Peter Denison <openwrt@marshadder.org> */
--	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
--	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
- 	.map_io		= ixp4xx_map_io,
- 	.init_irq	= ixp4xx_init_irq,
- 	.timer		= &ixp4xx_timer,
---- a/arch/arm/mach-ixp4xx/wg302v1-setup.c
-+++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
-@@ -161,8 +161,6 @@ static void __init wg302v1_init(void)
- #ifdef CONFIG_MACH_WG302V1
- MACHINE_START(WG302V1, "Netgear WG302 v1 / WAG302 v1")
- 	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
--	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
--	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
- 	.fixup		= wg302v1_fixup,
- 	.map_io		= ixp4xx_map_io,
- 	.init_irq	= ixp4xx_init_irq,
---- a/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-+++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -157,8 +157,6 @@ static void __init wrt300nv2_init(void)
- #ifdef CONFIG_MACH_WRT300NV2
- MACHINE_START(WRT300NV2, "Linksys WRT300N v2")
- 	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
--	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
--	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
- 	.map_io		= ixp4xx_map_io,
- 	.init_irq	= ixp4xx_init_irq,
- 	.timer		= &ixp4xx_timer,