n810: omapfb and keyboard fixes

SVN-Revision: 23898

2 files changed, 114 insertions, 107 deletions

diff --git a/target/linux/omap24xx/patches-2.6.37/300-nokia-board.patch b/target/linux/omap24xx/patches-2.6.37/300-nokia-board.patch
index e61212be48..f44716c178 100644
--- a/target/linux/omap24xx/patches-2.6.37/300-nokia-board.patch
+++ b/target/linux/omap24xx/patches-2.6.37/300-nokia-board.patch
@@ -12,7 +12,7 @@
 Index: linux-2.6.37-rc1/arch/arm/mach-omap1/board-nokia770.c
 ===================================================================
 --- linux-2.6.37-rc1.orig/arch/arm/mach-omap1/board-nokia770.c	2010-11-01 12:54:12.000000000 +0100
-+++ linux-2.6.37-rc1/arch/arm/mach-omap1/board-nokia770.c	2010-11-05 17:36:26.186000001 +0100
++++ linux-2.6.37-rc1/arch/arm/mach-omap1/board-nokia770.c	2010-11-06 17:20:54.534000001 +0100
 @@ -36,6 +36,7 @@
  #include <plat/lcd_mipid.h>
  #include <plat/mmc.h>
@@ -48,7 +48,7 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap1/board-nokia770.c
 Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c
 ===================================================================
 --- linux-2.6.37-rc1.orig/arch/arm/mach-omap2/board-n8x0.c	2010-11-01 12:54:12.000000000 +0100
-+++ linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c	2010-11-05 17:37:40.169999973 +0100
++++ linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c	2010-11-06 17:26:56.824022830 +0100
 @@ -18,9 +18,13 @@
  #include <linux/io.h>
  #include <linux/stddef.h>
@@ -72,7 +72,7 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c
  
  #include "mux.h"
  
-@@ -40,109 +46,156 @@
+@@ -40,109 +46,154 @@
  static int slot2_cover_open;
  static struct device *mmc_device;
  
@@ -92,11 +92,32 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c
 -static int tusb_set_power(int state)
 -{
 -	int i, retval = 0;
+-
+-	if (state) {
+-		gpio_set_value(TUSB6010_GPIO_ENABLE, 1);
+-		msleep(1);
+-
+-		/* Wait until TUSB6010 pulls INT pin down */
+-		i = 100;
+-		while (i && gpio_get_value(TUSB6010_GPIO_INT)) {
+-			msleep(1);
+-			i--;
+-		}
+-
+-		if (!i) {
+-			printk(KERN_ERR "tusb: powerup failed\n");
+-			retval = -ENODEV;
+-		}
+-	} else {
+-		gpio_set_value(TUSB6010_GPIO_ENABLE, 0);
+-		msleep(10);
+-	}
+-
+-	return retval;
 +#define	RX51_TSC2005_RESET_GPIO	94
 +#define	RX51_TSC2005_IRQ_GPIO	106
 +#define OMAP_TAG_NOKIA_BT	0x4e01
 +
-+#if 0
 +static s16 rx44_keymap[LM8323_KEYMAP_SIZE] = {
 +	[0x01] = KEY_Q,
 +	[0x02] = KEY_K,
@@ -170,11 +191,7 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c
 +	//.pwm1_name	= "n810::keyboard",
 +	//.pwm2_name	= "n810::cover",
 +};
-+#endif
- 
--	if (state) {
--		gpio_set_value(TUSB6010_GPIO_ENABLE, 1);
--		msleep(1);
++
 +struct omap_bluetooth_config {
 +	u8    chip_type;
 +	u8    bt_wakeup_gpio;
@@ -200,42 +217,16 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c
 +	n8x0_bt_device.dev.platform_data = (void *) bt_config;
 +	if (platform_device_register(&n8x0_bt_device) < 0)
 +		BUG();
-+}
- 
--		/* Wait until TUSB6010 pulls INT pin down */
--		i = 100;
--		while (i && gpio_get_value(TUSB6010_GPIO_INT)) {
--			msleep(1);
--			i--;
--		}
-+static struct omap2_mcspi_device_config mipid_mcspi_config = {
-+	.turbo_mode	= 0,
-+	.single_channel	= 1,
-+};
- 
--		if (!i) {
--			printk(KERN_ERR "tusb: powerup failed\n");
--			retval = -ENODEV;
--		}
--	} else {
--		gpio_set_value(TUSB6010_GPIO_ENABLE, 0);
--		msleep(10);
--	}
-+static int slot1_cover_open;
-+static int slot2_cover_open;
-+static struct device *mmc_device;
- 
--	return retval;
--}
+ }
  
 -static struct musb_hdrc_config musb_config = {
 -	.multipoint	= 1,
 -	.dyn_fifo	= 1,
 -	.num_eps	= 16,
 -	.ram_bits	= 12,
-+static struct omap2_mcspi_device_config p54spi_mcspi_config = {
++static struct omap2_mcspi_device_config mipid_mcspi_config = {
 +	.turbo_mode	= 0,
-+	.single_channel = 1,
++	.single_channel	= 1,
  };
  
 -static struct musb_hdrc_platform_data tusb_data = {
@@ -245,20 +236,15 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c
 -	.mode		= MUSB_PERIPHERAL,
 -#else /* defined(CONFIG_USB_MUSB_HOST) */
 -	.mode		= MUSB_HOST,
-+#ifdef CONFIG_MACH_NOKIA_N8X0_LCD
-+extern struct mipid_platform_data n8x0_mipid_platform_data;
- #endif
+-#endif
 -	.set_power	= tusb_set_power,
 -	.min_power	= 25,	/* x2 = 50 mA drawn from VBUS as peripheral */
 -	.power		= 100,	/* Max 100 mA VBUS for host mode */
 -	.config		= &musb_config,
 -};
- 
+-
 -static void __init n8x0_usb_init(void)
-+#ifdef CONFIG_TOUCHSCREEN_TSC2005
-+static struct tsc2005_platform_data tsc2005_config;
-+static void rx51_tsc2005_set_reset(bool enable)
- {
+-{
 -	int ret = 0;
 -	static char	announce[] __initdata = KERN_INFO "TUSB 6010\n";
 -
@@ -272,25 +258,39 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c
 -	gpio_direction_output(TUSB6010_GPIO_ENABLE, 0);
 -
 -	tusb_set_power(0);
--
++static int slot1_cover_open;
++static int slot2_cover_open;
++static struct device *mmc_device;
+ 
 -	ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2,
 -					TUSB6010_ASYNC_CS, TUSB6010_SYNC_CS,
 -					TUSB6010_GPIO_INT, TUSB6010_DMACHAN);
 -	if (ret != 0)
 -		goto err;
--
+ 
 -	printk(announce);
--
++static struct omap2_mcspi_device_config p54spi_mcspi_config = {
++	.turbo_mode	= 0,
++	.single_channel = 1,
++};
+ 
 -	return;
--
++#ifdef CONFIG_MACH_NOKIA_N8X0_LCD
++extern struct mipid_platform_data n8x0_mipid_platform_data;
++#endif
+ 
 -err:
 -	gpio_free(TUSB6010_GPIO_ENABLE);
++#ifdef CONFIG_TOUCHSCREEN_TSC2005
++static struct tsc2005_platform_data tsc2005_config;
++static void rx51_tsc2005_set_reset(bool enable)
++{
 +	gpio_set_value(RX51_TSC2005_RESET_GPIO, enable);
  }
 -#else
- 
--static void __init n8x0_usb_init(void) {}
 -
+-static void __init n8x0_usb_init(void) {}
+ 
 -#endif /*CONFIG_USB_TUSB6010 */
 -
 -
@@ -315,7 +315,7 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c
  	{
  		.modalias	= "p54spi",
  		.bus_num	= 2,
-@@ -150,7 +203,71 @@
+@@ -150,8 +201,60 @@
  		.max_speed_hz   = 48000000,
  		.controller_data = &p54spi_mcspi_config,
  	},
@@ -328,8 +328,8 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c
 +		.controller_data = &tsc2005_mcspi_config,
 +		.platform_data   = &tsc2005_config,
 +	},
-+};
-+
+ };
+ 
 +static void __init tsc2005_set_config(void)
 +{
 +	const struct omap_lcd_config *conf;
@@ -373,21 +373,10 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c
 +	}
 +}
 +
-+#if 0
-+static struct i2c_board_info __initdata_or_module n8x0_i2c_board_info_2[] = {};
-+
-+static struct i2c_board_info __initdata_or_module n810_i2c_board_info_2[] = {
-+	{
-+		I2C_BOARD_INFO("lm8323", 0x45),
-+		.irq		= OMAP_GPIO_IRQ(109),
-+		.platform_data	= &lm8323_pdata,
-+	},
- };
-+#endif
- 
  #if defined(CONFIG_MTD_ONENAND_OMAP2) || \
  	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-@@ -184,6 +301,20 @@
+ 
+@@ -184,6 +287,20 @@
  	},
  };
  
@@ -408,7 +397,19 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c
  static struct omap_onenand_platform_data board_onenand_data = {
  	.cs		= 0,
  	.gpio_irq	= 26,
-@@ -657,10 +788,62 @@
+@@ -626,6 +743,11 @@
+ 
+ static struct i2c_board_info n810_i2c_board_info_2[] __initdata = {
+ 	{
++		I2C_BOARD_INFO("lm8323", 0x45),
++		.irq		= OMAP_GPIO_IRQ(109),
++		.platform_data	= &lm8323_pdata,
++	},
++	{
+ 		I2C_BOARD_INFO("tlv320aic3x", 0x18),
+ 		.platform_data = &n810_aic33_data,
+ 	},
+@@ -657,10 +779,62 @@
  #define board_mux	NULL
  #endif
  
@@ -471,10 +472,21 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c
  	spi_register_board_info(n800_spi_board_info,
  				ARRAY_SIZE(n800_spi_board_info));
  	omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1,
+@@ -671,6 +845,10 @@
+ 					ARRAY_SIZE(n810_i2c_board_info_2));
+ 
+ 	omap_serial_init();
++
++	n8x0_mipid_init();
++	n8x0_blizzard_init();
++
+ 	n8x0_onenand_init();
+ 	n8x0_mmc_init();
+ 	n8x0_usb_init();
 Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0-lcd.c
 ===================================================================
 --- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0-lcd.c	2010-11-05 17:36:45.209000001 +0100
++++ linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0-lcd.c	2010-11-06 17:26:25.503999974 +0100
 @@ -0,0 +1,127 @@
 +/*
 + * linux/arch/arm/mach-omap2/board-n8x0.c
@@ -606,7 +618,7 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0-lcd.c
 Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0-usb.c
 ===================================================================
 --- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0-usb.c	2010-11-05 17:36:26.187000001 +0100
++++ linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0-usb.c	2010-11-06 17:20:54.534000001 +0100
 @@ -0,0 +1,175 @@
 +/*
 + * linux/arch/arm/mach-omap2/board-n8x0-usb.c
@@ -786,7 +798,7 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0-usb.c
 Index: linux-2.6.37-rc1/arch/arm/mach-omap2/control.c
 ===================================================================
 --- linux-2.6.37-rc1.orig/arch/arm/mach-omap2/control.c	2010-11-01 12:54:12.000000000 +0100
-+++ linux-2.6.37-rc1/arch/arm/mach-omap2/control.c	2010-11-05 17:36:26.187000001 +0100
++++ linux-2.6.37-rc1/arch/arm/mach-omap2/control.c	2010-11-06 17:20:54.534000001 +0100
 @@ -172,6 +172,7 @@
  	return __raw_readw(OMAP_CTRL_REGADDR(offset));
  }
@@ -806,7 +818,7 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/control.c
 Index: linux-2.6.37-rc1/arch/arm/mach-omap2/Kconfig
 ===================================================================
 --- linux-2.6.37-rc1.orig/arch/arm/mach-omap2/Kconfig	2010-11-01 12:54:12.000000000 +0100
-+++ linux-2.6.37-rc1/arch/arm/mach-omap2/Kconfig	2010-11-05 17:36:26.187000001 +0100
++++ linux-2.6.37-rc1/arch/arm/mach-omap2/Kconfig	2010-11-06 17:20:54.534000001 +0100
 @@ -210,6 +210,16 @@
  	select MACH_NOKIA_N810
  	select MACH_NOKIA_N810_WIMAX
@@ -827,7 +839,7 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/Kconfig
 Index: linux-2.6.37-rc1/arch/arm/mach-omap2/Makefile
 ===================================================================
 --- linux-2.6.37-rc1.orig/arch/arm/mach-omap2/Makefile	2010-11-01 12:54:12.000000000 +0100
-+++ linux-2.6.37-rc1/arch/arm/mach-omap2/Makefile	2010-11-05 17:36:26.187000001 +0100
++++ linux-2.6.37-rc1/arch/arm/mach-omap2/Makefile	2010-11-06 17:20:54.534000001 +0100
 @@ -139,6 +139,8 @@
  					   hsmmc.o \
  					   board-flash.o
@@ -840,35 +852,30 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/Makefile
 Index: linux-2.6.37-rc1/arch/arm/mach-omap2/serial.c
 ===================================================================
 --- linux-2.6.37-rc1.orig/arch/arm/mach-omap2/serial.c	2010-11-01 12:54:12.000000000 +0100
-+++ linux-2.6.37-rc1/arch/arm/mach-omap2/serial.c	2010-11-05 17:36:26.187000001 +0100
-@@ -545,10 +545,10 @@
++++ linux-2.6.37-rc1/arch/arm/mach-omap2/serial.c	2010-11-06 17:20:54.535000001 +0100
+@@ -545,14 +545,17 @@
  		uart->padconf = 0;
  	}
  
--	uart->irqflags |= IRQF_SHARED;
-+/*	uart->irqflags |= IRQF_SHARED;
++#if 1
+ 	uart->irqflags |= IRQF_SHARED;
  	ret = request_threaded_irq(uart->irq, NULL, omap_uart_interrupt,
  				   IRQF_SHARED, "serial idle", (void *)uart);
--	WARN_ON(ret);
-+	WARN_ON(ret); */
+ 	WARN_ON(ret);
++#endif
  }
  
  void omap_uart_enable_irqs(int enable)
-@@ -556,7 +556,7 @@
+ {
++#if 1
  	int ret;
  	struct omap_uart_state *uart;
  
--	list_for_each_entry(uart, &uart_list, node) {
-+/*	list_for_each_entry(uart, &uart_list, node) {
- 		if (enable) {
- 			pm_runtime_put_sync(&uart->pdev->dev);
- 			ret = request_threaded_irq(uart->irq, NULL,
-@@ -568,7 +568,7 @@
- 			pm_runtime_get_noresume(&uart->pdev->dev);
+@@ -569,6 +572,7 @@
  			free_irq(uart->irq, (void *)uart);
  		}
--	}
-+	} */
+ 	}
++#endif
  }
  
  static ssize_t sleep_timeout_show(struct device *dev,
diff --git a/target/linux/omap24xx/patches-2.6.37/900-n810-battery-management.patch b/target/linux/omap24xx/patches-2.6.37/900-n810-battery-management.patch
index 1b8316b220..a85eca510d 100644
--- a/target/linux/omap24xx/patches-2.6.37/900-n810-battery-management.patch
+++ b/target/linux/omap24xx/patches-2.6.37/900-n810-battery-management.patch
@@ -12,8 +12,8 @@
 
 Index: linux-2.6.37-rc1/drivers/cbus/Kconfig
 ===================================================================
---- linux-2.6.37-rc1.orig/drivers/cbus/Kconfig	2010-11-05 17:38:14.843000000 +0100
-+++ linux-2.6.37-rc1/drivers/cbus/Kconfig	2010-11-05 17:38:14.894000001 +0100
+--- linux-2.6.37-rc1.orig/drivers/cbus/Kconfig	2010-11-06 17:28:21.821000000 +0100
++++ linux-2.6.37-rc1/drivers/cbus/Kconfig	2010-11-06 17:28:21.872000001 +0100
 @@ -94,4 +94,16 @@
  	  to Retu/Vilma. Detection state and events are exposed through
  	  sysfs.
@@ -33,8 +33,8 @@ Index: linux-2.6.37-rc1/drivers/cbus/Kconfig
  endmenu
 Index: linux-2.6.37-rc1/drivers/cbus/Makefile
 ===================================================================
---- linux-2.6.37-rc1.orig/drivers/cbus/Makefile	2010-11-05 17:38:14.834000050 +0100
-+++ linux-2.6.37-rc1/drivers/cbus/Makefile	2010-11-05 17:38:14.894000001 +0100
+--- linux-2.6.37-rc1.orig/drivers/cbus/Makefile	2010-11-06 17:28:21.812000054 +0100
++++ linux-2.6.37-rc1/drivers/cbus/Makefile	2010-11-06 17:28:21.872000001 +0100
 @@ -12,3 +12,6 @@
  obj-$(CONFIG_CBUS_TAHVO_USER)	+= tahvo-user.o
  obj-$(CONFIG_CBUS_RETU_USER)	+= retu-user.o
@@ -45,7 +45,7 @@ Index: linux-2.6.37-rc1/drivers/cbus/Makefile
 Index: linux-2.6.37-rc1/drivers/cbus/n810bm_main.c
 ===================================================================
 --- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.37-rc1/drivers/cbus/n810bm_main.c	2010-11-05 17:38:14.894000001 +0100
++++ linux-2.6.37-rc1/drivers/cbus/n810bm_main.c	2010-11-06 17:28:21.872000001 +0100
 @@ -0,0 +1,397 @@
 +/*
 + *   Nokia n810 battery management
@@ -446,8 +446,8 @@ Index: linux-2.6.37-rc1/drivers/cbus/n810bm_main.c
 +MODULE_AUTHOR("Michael Buesch");
 Index: linux-2.6.37-rc1/drivers/cbus/retu.c
 ===================================================================
---- linux-2.6.37-rc1.orig/drivers/cbus/retu.c	2010-11-05 17:38:14.834000050 +0100
-+++ linux-2.6.37-rc1/drivers/cbus/retu.c	2010-11-05 17:38:14.895000001 +0100
+--- linux-2.6.37-rc1.orig/drivers/cbus/retu.c	2010-11-06 17:28:21.812000054 +0100
++++ linux-2.6.37-rc1/drivers/cbus/retu.c	2010-11-06 17:28:21.872000001 +0100
 @@ -85,10 +85,10 @@
   *
   * This function writes a value to the specified register
@@ -463,8 +463,8 @@ Index: linux-2.6.37-rc1/drivers/cbus/retu.c
  void retu_set_clear_reg_bits(int reg, u16 set, u16 clear)
 Index: linux-2.6.37-rc1/drivers/cbus/retu.h
 ===================================================================
---- linux-2.6.37-rc1.orig/drivers/cbus/retu.h	2010-11-05 17:38:14.834000050 +0100
-+++ linux-2.6.37-rc1/drivers/cbus/retu.h	2010-11-05 17:38:14.895000001 +0100
+--- linux-2.6.37-rc1.orig/drivers/cbus/retu.h	2010-11-06 17:28:21.812000054 +0100
++++ linux-2.6.37-rc1/drivers/cbus/retu.h	2010-11-06 17:28:21.872000001 +0100
 @@ -39,6 +39,7 @@
  #define RETU_REG_CC2		0x0e	/* Common control register 2 */
  #define RETU_REG_CTRL_CLR	0x0f	/* Regulator clear register */
@@ -484,9 +484,9 @@ Index: linux-2.6.37-rc1/drivers/cbus/retu.h
  int retu_request_irq(int id, void *irq_handler, unsigned long arg, char *name);
 Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c
 ===================================================================
---- linux-2.6.37-rc1.orig/arch/arm/mach-omap2/board-n8x0.c	2010-11-05 17:38:14.819000329 +0100
-+++ linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c	2010-11-05 17:38:14.895000001 +0100
-@@ -908,6 +908,17 @@
+--- linux-2.6.37-rc1.orig/arch/arm/mach-omap2/board-n8x0.c	2010-11-06 17:28:21.796000362 +0100
++++ linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c	2010-11-06 17:28:21.873000001 +0100
+@@ -899,6 +899,17 @@
  				    ARRAY_SIZE(n8x0_gpio_switches));
  }
  
@@ -504,7 +504,7 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c
  static void __init n8x0_init_machine(void)
  {
  	omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
-@@ -930,6 +941,8 @@
+@@ -925,6 +936,8 @@
  	n8x0_onenand_init();
  	n8x0_mmc_init();
  	n8x0_usb_init();
@@ -516,7 +516,7 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c
 Index: linux-2.6.37-rc1/drivers/cbus/lipocharge.c
 ===================================================================
 --- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.37-rc1/drivers/cbus/lipocharge.c	2010-11-05 17:38:14.895000001 +0100
++++ linux-2.6.37-rc1/drivers/cbus/lipocharge.c	2010-11-06 17:28:21.873000001 +0100
 @@ -0,0 +1,63 @@
 +/*
 + *   Generic LIPO battery charger
@@ -584,7 +584,7 @@ Index: linux-2.6.37-rc1/drivers/cbus/lipocharge.c
 Index: linux-2.6.37-rc1/drivers/cbus/lipocharge.h
 ===================================================================
 --- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.37-rc1/drivers/cbus/lipocharge.h	2010-11-05 17:38:14.895000001 +0100
++++ linux-2.6.37-rc1/drivers/cbus/lipocharge.h	2010-11-06 17:28:21.873000001 +0100
 @@ -0,0 +1,50 @@
 +#ifndef LIPOCHARGE_H_
 +#define LIPOCHARGE_H_
@@ -638,8 +638,8 @@ Index: linux-2.6.37-rc1/drivers/cbus/lipocharge.h
 +#endif /* LIPOCHARGE_H_ */
 Index: linux-2.6.37-rc1/drivers/cbus/tahvo.h
 ===================================================================
---- linux-2.6.37-rc1.orig/drivers/cbus/tahvo.h	2010-11-05 17:38:14.835000037 +0100
-+++ linux-2.6.37-rc1/drivers/cbus/tahvo.h	2010-11-05 17:38:14.895000001 +0100
+--- linux-2.6.37-rc1.orig/drivers/cbus/tahvo.h	2010-11-06 17:28:21.813000041 +0100
++++ linux-2.6.37-rc1/drivers/cbus/tahvo.h	2010-11-06 17:28:21.873000001 +0100
 @@ -30,8 +30,14 @@
  #define TAHVO_REG_IDR		0x01	/* Interrupt ID */
  #define TAHVO_REG_IDSR		0x02	/* Interrupt status */