ipq806x: fix "reboot" command

The watchdog driver already registers a restart notifier, we just have
to enable it in the config and in the DT to fix the "reboot" command.

This is done by integratin the following patch-set:
https://lkml.org/lkml/2015/2/20/610

I'm copy-pasting the description below:
qcom-wdt is currently assuming the presence of a dedicated node in DT
to gets its configuration. However, on msm architecture, the watchdog is
usually part of the timer block. So this patch-set is changing the driver
and slightly enhancing the timer DT bindings to provide the relevant clocks
and interrupts.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 44504

3 files changed, 175 insertions, 0 deletions

diff --git a/target/linux/ipq806x/patches/011-watchdog-qcom-use-timer-devicetree-binding.patch b/target/linux/ipq806x/patches/011-watchdog-qcom-use-timer-devicetree-binding.patch
new file mode 100644
index 0000000000..0cd7da1f6d
--- /dev/null
+++ b/target/linux/ipq806x/patches/011-watchdog-qcom-use-timer-devicetree-binding.patch
@@ -0,0 +1,72 @@
+From fded70251b1b58f68de1d3757ece9965f0b75452 Mon Sep 17 00:00:00 2001
+From: Mathieu Olivari <mathieu@codeaurora.org>
+Date: Thu, 19 Feb 2015 20:19:30 -0800
+Subject: [PATCH 1/3] watchdog: qcom: use timer devicetree binding
+
+MSM watchdog configuration happens in the same register block as the
+timer, so we'll use the same binding as the existing timer.
+
+The qcom-wdt will now be probed when devicetree has an entry compatible
+with "qcom,kpss-timer" or "qcom-scss-timer".
+
+Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
+---
+ drivers/watchdog/qcom-wdt.c | 21 +++++++++++++++------
+ 1 file changed, 15 insertions(+), 6 deletions(-)
+
+diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c
+index aa85618..aa03ca8 100644
+--- a/drivers/watchdog/qcom-wdt.c
++++ b/drivers/watchdog/qcom-wdt.c
+@@ -20,9 +20,9 @@
+ #include <linux/reboot.h>
+ #include <linux/watchdog.h>
+ 
+-#define WDT_RST		0x0
+-#define WDT_EN		0x8
+-#define WDT_BITE_TIME	0x24
++#define WDT_RST		0x38
++#define WDT_EN		0x40
++#define WDT_BITE_TIME	0x5C
+ 
+ struct qcom_wdt {
+ 	struct watchdog_device	wdd;
+@@ -117,6 +117,8 @@ static int qcom_wdt_probe(struct platform_device *pdev)
+ {
+ 	struct qcom_wdt *wdt;
+ 	struct resource *res;
++	struct device_node *np = pdev->dev.of_node;
++	u32 percpu_offset;
+ 	int ret;
+ 
+ 	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+@@ -124,6 +126,14 @@ static int qcom_wdt_probe(struct platform_device *pdev)
+ 		return -ENOMEM;
+ 
+ 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++
++	/* We use CPU0's DGT for the watchdog */
++	if (of_property_read_u32(np, "cpu-offset", &percpu_offset))
++		percpu_offset = 0;
++
++	res->start += percpu_offset;
++	res->end += percpu_offset;
++
+ 	wdt->base = devm_ioremap_resource(&pdev->dev, res);
+ 	if (IS_ERR(wdt->base))
+ 		return PTR_ERR(wdt->base);
+@@ -203,9 +213,8 @@ static int qcom_wdt_remove(struct platform_device *pdev)
+ }
+ 
+ static const struct of_device_id qcom_wdt_of_table[] = {
+-	{ .compatible = "qcom,kpss-wdt-msm8960", },
+-	{ .compatible = "qcom,kpss-wdt-apq8064", },
+-	{ .compatible = "qcom,kpss-wdt-ipq8064", },
++	{ .compatible = "qcom,kpss-timer" },
++	{ .compatible = "qcom,scss-timer" },
+ 	{ },
+ };
+ MODULE_DEVICE_TABLE(of, qcom_wdt_of_table);
+-- 
+1.9.1
+
diff --git a/target/linux/ipq806x/patches/012-ARM-qcom-add-description-of-KPSS-WDT-for-IPQ8064.patch b/target/linux/ipq806x/patches/012-ARM-qcom-add-description-of-KPSS-WDT-for-IPQ8064.patch
new file mode 100644
index 0000000000..24a093a812
--- /dev/null
+++ b/target/linux/ipq806x/patches/012-ARM-qcom-add-description-of-KPSS-WDT-for-IPQ8064.patch
@@ -0,0 +1,53 @@
+From 297cf8136ecd6a56520888fd28948393766b8ee7 Mon Sep 17 00:00:00 2001
+From: Mathieu Olivari <mathieu@codeaurora.org>
+Date: Thu, 19 Feb 2015 20:27:39 -0800
+Subject: [PATCH 2/3] ARM: qcom: add description of KPSS WDT for IPQ8064
+
+Add the watchdog related entries to the Krait Processor Sub-system
+(KPSS) timer IPQ8064 devicetree section. Also, add a fixed-clock
+description of SLEEP_CLK, which will do for now.
+
+Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
+Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
+---
+ arch/arm/boot/dts/qcom-ipq8064.dtsi | 14 +++++++++++++-
+ 1 file changed, 13 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+index cb225da..d01f618 100644
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -60,6 +60,14 @@
+ 		};
+ 	};
+ 
++	clocks {
++		sleep_clk: sleep_clk {
++			compatible = "fixed-clock";
++			clock-frequency = <32768>;
++			#clock-cells = <0>;
++		};
++	};
++
+ 	soc: soc {
+ 		#address-cells = <1>;
+ 		#size-cells = <1>;
+@@ -89,10 +97,14 @@
+ 			compatible = "qcom,kpss-timer", "qcom,msm-timer";
+ 			interrupts = <1 1 0x301>,
+ 				     <1 2 0x301>,
+-				     <1 3 0x301>;
++				     <1 3 0x301>,
++				     <1 4 0x301>,
++				     <1 5 0x301>;
+ 			reg = <0x0200a000 0x100>;
+ 			clock-frequency = <25000000>,
+ 					  <32768>;
++			clocks = <&sleep_clk>;
++			clock-names = "sleep";
+ 			cpu-offset = <0x80000>;
+ 		};
+ 
+-- 
+1.9.1
+
diff --git a/target/linux/ipq806x/patches/013-ARM-msm-add-watchdog-entries-to-DT-timer-binding-doc.patch b/target/linux/ipq806x/patches/013-ARM-msm-add-watchdog-entries-to-DT-timer-binding-doc.patch
new file mode 100644
index 0000000000..6876768962
--- /dev/null
+++ b/target/linux/ipq806x/patches/013-ARM-msm-add-watchdog-entries-to-DT-timer-binding-doc.patch
@@ -0,0 +1,50 @@
+From e535f01dffb6dd9e09934fa219be52af3437a8f6 Mon Sep 17 00:00:00 2001
+From: Mathieu Olivari <mathieu@codeaurora.org>
+Date: Thu, 19 Feb 2015 20:36:27 -0800
+Subject: [PATCH 3/3] ARM: msm: add watchdog entries to DT timer binding doc
+
+The watchdog has been reworked to use the same DT node as the timer.
+This change is updating the device tree doc accordingly.
+
+Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
+---
+ Documentation/devicetree/bindings/arm/msm/timer.txt | 16 +++++++++++++---
+ 1 file changed, 13 insertions(+), 3 deletions(-)
+
+--- a/Documentation/devicetree/bindings/arm/msm/timer.txt
++++ b/Documentation/devicetree/bindings/arm/msm/timer.txt
+@@ -9,11 +9,17 @@ Properties:
+                "qcom,scss-timer" - scorpion subsystem
+ 
+ - interrupts : Interrupts for the the debug timer, the first general purpose
+-               timer, and optionally a second general purpose timer in that
+-               order.
++               timer, and optionally a second general purpose timer, and
++               optionally as well, 2 watchdog interrupts, in that order.
+ 
+ - reg : Specifies the base address of the timer registers.
+ 
++- clocks: Reference to the parent clocks, one per output clock. The parents
++          must appear in the same order as the clock names.
++
++- clock-names: The name of the clocks as free-form strings. They should be in
++               the same order as the clocks.
++
+ - clock-frequency : The frequency of the debug timer and the general purpose
+                     timer(s) in Hz in that order.
+ 
+@@ -29,9 +35,13 @@ Example:
+                compatible = "qcom,scss-timer", "qcom,msm-timer";
+                interrupts = <1 1 0x301>,
+                             <1 2 0x301>,
+-                            <1 3 0x301>;
++                            <1 3 0x301>,
++                            <1 4 0x301>,
++                            <1 5 0x301>;
+                reg = <0x0200a000 0x100>;
+                clock-frequency = <19200000>,
+                                  <32768>;
++               clocks = <&sleep_clk>;
++               clock-names = "sleep";
+                cpu-offset = <0x40000>;
+        };