aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorGabor Juhos <juhosg@openwrt.org>2007-06-30 15:21:35 +0000
committerGabor Juhos <juhosg@openwrt.org>2007-06-30 15:21:35 +0000
commit5074eb5ac713242afa6e3899bcc8c3652c8f896b (patch)
treef55eb0dbbb9726957fed049cdffef4434a21a2e4 /target/linux
parent9679dfcc6296595027b7acfb8709ed63e82f2a72 (diff)
downloadupstream-5074eb5ac713242afa6e3899bcc8c3652c8f896b.tar.gz
upstream-5074eb5ac713242afa6e3899bcc8c3652c8f896b.tar.bz2
upstream-5074eb5ac713242afa6e3899bcc8c3652c8f896b.zip
Oops! I've copied r7557 instead of r7757, sorry
SVN-Revision: 7799
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/adm5120-2.6/patches/001-adm5120.patch89
-rw-r--r--target/linux/adm5120-2.6/patches/002-adm5120_flash.patch25
-rw-r--r--target/linux/adm5120-2.6/patches/003-adm5120_switch.patch25
-rw-r--r--target/linux/adm5120-2.6/patches/004-adm5120_uart.patch50
-rw-r--r--target/linux/adm5120-2.6/patches/005-adm5120_usb.patch53
-rw-r--r--target/linux/adm5120-2.6/patches/006-adm5120_gpio.patch25
-rw-r--r--target/linux/adm5120-2.6/patches/007-adm5120_pci.patch20
-rw-r--r--target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch37
-rwxr-xr-xtarget/linux/adm5120-2.6/patches/101-mtd-mxflash.patch31
-rw-r--r--target/linux/adm5120-2.6/patches/140-cmdline_hack.patch27
-rw-r--r--target/linux/adm5120-2.6/patches/500-Nand.patch29
11 files changed, 0 insertions, 411 deletions
diff --git a/target/linux/adm5120-2.6/patches/001-adm5120.patch b/target/linux/adm5120-2.6/patches/001-adm5120.patch
deleted file mode 100644
index 70129373f8..0000000000
--- a/target/linux/adm5120-2.6/patches/001-adm5120.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-diff -urN linux-2.6.19.2/arch/mips/Kconfig linux-2.6.19.2.new/arch/mips/Kconfig
---- linux-2.6.19.2/arch/mips/Kconfig 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.new/arch/mips/Kconfig 2007-01-23 14:49:38.000000000 +0100
-@@ -12,6 +12,21 @@
- prompt "System type"
- default SGI_IP22
-
-+config MIPS_ADM5120
-+ bool "Support for ADM5120 SoC"
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ select SYS_SUPPORTS_LITTLE_ENDIAN
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select GENERIC_GPIO
-+
-+config PCI_ADM5120
-+ bool "Add PCI control support for ADM5120"
-+ depends on MIPS_ADM5120 && PCI
-+
- config MIPS_MTX1
- bool "4G Systems MTX-1 board"
- select DMA_NONCOHERENT
-diff -urN linux-2.6.19.2/arch/mips/Makefile linux-2.6.19.2.new/arch/mips/Makefile
---- linux-2.6.19.2/arch/mips/Makefile 2007-01-23 14:02:57.000000000 +0100
-+++ linux-2.6.19.2.new/arch/mips/Makefile 2007-01-23 14:49:39.000000000 +0100
-@@ -165,6 +165,14 @@
- load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000
-
- #
-+# ADMtek 5120
-+#
-+
-+core-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/
-+cflags-$(CONFIG_MIPS_ADM5120) += -Iinclude/asm-mips/mach-adm5120
-+load-$(CONFIG_MIPS_ADM5120) += 0xffffffff80001000
-+
-+#
- # Common Alchemy Au1x00 stuff
- #
- core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/
-diff -urN linux-2.6.19.2/include/asm-mips/bootinfo.h linux-2.6.19.2.new/include/asm-mips/bootinfo.h
---- linux-2.6.19.2/include/asm-mips/bootinfo.h 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.new/include/asm-mips/bootinfo.h 2007-01-23 14:49:40.000000000 +0100
-@@ -212,6 +212,42 @@
- #define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */
- #define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */
-
-+/*
-+ * Valid machtype for group ADMtek ADM5120
-+ */
-+#define MACH_GROUP_ADM5120 23
-+#define MACH_ADM5120_UNKNOWN 0 /* Unknown board */
-+#define MACH_ADM5120_WP54G_WRT 1 /* Compex WP54G-WRT */
-+#define MACH_ADM5120_WP54G 2 /* Compex WP54G */
-+#define MACH_ADM5120_WP54AG 3 /* Compex WP54AG */
-+#define MACH_ADM5120_WPP54G 4 /* Compex WPP54G */
-+#define MACH_ADM5120_WPP54AG 5 /* Compex WPP54AG */
-+#define MACH_ADM5120_NP28G 6 /* Compex NP28G */
-+#define MACH_ADM5120_NP28GHS 7 /* Compex NP28G HotSpot */
-+#define MACH_ADM5120_NP27G 8 /* Compex NP27G */
-+#define MACH_ADM5120_WP54Gv1C 9 /* Compex WP54G version 1C */
-+#define MACH_ADM5120_RB_111 10 /* Mikrotik RouterBOARD 111 */
-+#define MACH_ADM5120_RB_112 11 /* Mikrotik RouterBOARD 112 */
-+#define MACH_ADM5120_RB_133 12 /* Mikrotik RouterBOARD 133 */
-+#define MACH_ADM5120_RB_133C 13 /* Mikrotik RouterBOARD 133c */
-+#define MACH_ADM5120_RB_150 14 /* Mikrotik RouterBOARD 150 */
-+#define MACH_ADM5120_RB_153 15 /* Mikrotik RouterBOARD 153 */
-+#define MACH_ADM5120_HS100 16 /* ZyXEL HomeSafe 100/100W */
-+#define MACH_ADM5120_P334 17 /* ZyXEL Prestige 334 */
-+#define MACH_ADM5120_P334U 18 /* ZyXEL Prestige 334U */
-+#define MACH_ADM5120_P334W 19 /* ZyXEL Prestige 334W */
-+#define MACH_ADM5120_P334WH 20 /* ZyXEL Prestige 334WH */
-+#define MACH_ADM5120_P334WHD 21 /* ZyXEL Prestige 334WHD */
-+#define MACH_ADM5120_P334WT 22 /* ZyXEL Prestige 334WT */
-+#define MACH_ADM5120_P335 23 /* ZyXEL Prestige 335/335WT */
-+#define MACH_ADM5120_P335PLUS 24 /* ZyXEL Prestige 335Plus */
-+#define MACH_ADM5120_P335U 25 /* ZyXEL Prestige 335U */
-+#define MACH_ADM5120_ES2108 26 /* ZyXEL Ethernet Switch 2108 */
-+#define MACH_ADM5120_ES2108F 27 /* ZyXEL Ethernet Switch 2108-F */
-+#define MACH_ADM5120_ES2108G 28 /* ZyXEL Ethernet Switch 2108-G */
-+#define MACH_ADM5120_ES2108LC 29 /* ZyXEL Ethernet Switch 2108-LC */
-+#define MACH_ADM5120_ES2108PWR 30 /* ZyXEL Ethernet Switch 2108-PWR */
-+
- #define CL_SIZE COMMAND_LINE_SIZE
-
- const char *get_system_type(void);
diff --git a/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch b/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch
deleted file mode 100644
index 503a49567c..0000000000
--- a/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-diff -urN linux-2.6.19.2/drivers/mtd/maps/Kconfig linux-2.6.19.2-adm5120/drivers/mtd/maps/Kconfig
---- linux-2.6.19.2/drivers/mtd/maps/Kconfig 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/mtd/maps/Kconfig 2007-01-23 01:13:39.000000000 +0100
-@@ -622,5 +622,10 @@
-
- This selection automatically selects the map_ram driver.
-
-+config MTD_ADM5120
-+ tristate "Map driver for ADMtek ADM5120 boards"
-+ depends on MIPS_ADM5120
-+ select MTD_CFI_AMDSTD
-+
- endmenu
-
-diff -urN linux-2.6.19.2/drivers/mtd/maps/Makefile linux-2.6.19.2-adm5120/drivers/mtd/maps/Makefile
---- linux-2.6.19.2/drivers/mtd/maps/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/mtd/maps/Makefile 2007-01-23 01:20:52.000000000 +0100
-@@ -43,6 +43,7 @@
- obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
- obj-$(CONFIG_MTD_PCI) += pci.o
- obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o
-+obj-$(CONFIG_MTD_ADM5120) += adm5120_mtd.o
- obj-$(CONFIG_MTD_LASAT) += lasat.o
- obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
- obj-$(CONFIG_MTD_EDB7312) += edb7312.o
diff --git a/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch b/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch
deleted file mode 100644
index f6fec30bca..0000000000
--- a/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-diff -urN linux-2.6.19.2/drivers/net/Kconfig linux-2.6.19.2-adm5120/drivers/net/Kconfig
---- linux-2.6.19.2/drivers/net/Kconfig 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/net/Kconfig 2007-01-23 01:13:39.000000000 +0100
-@@ -450,6 +450,10 @@
- If you have an Alchemy Semi AU1X00 based system
- say Y. Otherwise, say N.
-
-+config MIPS_ADM5120_ENET
-+ tristate "MIPS ADM5120 Ethernet switch support"
-+ depends on NET_ETHERNET && MIPS_ADM5120
-+
- config NET_SB1250_MAC
- tristate "SB1250 Ethernet support"
- depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC
-diff -urN linux-2.6.19.2/drivers/net/Makefile linux-2.6.19.2-adm5120/drivers/net/Makefile
---- linux-2.6.19.2/drivers/net/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/net/Makefile 2007-01-23 01:13:39.000000000 +0100
-@@ -164,6 +164,7 @@
- # This is also a 82596 and should probably be merged
- obj-$(CONFIG_LP486E) += lp486e.o
-
-+obj-$(CONFIG_MIPS_ADM5120_ENET) += adm5120sw.o
- obj-$(CONFIG_ETH16I) += eth16i.o
- obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o
- obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
diff --git a/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch b/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch
deleted file mode 100644
index 6f2ef7bb36..0000000000
--- a/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-diff -urN linux-2.6.19.2/drivers/serial/Kconfig linux-2.6.19.2-adm5120/drivers/serial/Kconfig
---- linux-2.6.19.2/drivers/serial/Kconfig 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/serial/Kconfig 2007-01-23 01:13:39.000000000 +0100
-@@ -246,6 +246,22 @@
-
- comment "Non-8250 serial port support"
-
-+config SERIAL_ADM5120
-+ bool "ADM5120 serial port support"
-+ depends on MIPS_ADM5120
-+ select SERIAL_CORE
-+ select SERIAL_CORE_CONSOLE
-+ help
-+ Driver for the on chip UARTs on the ADM5120 SoC
-+
-+config ADM5120_NR_UARTS
-+ int "Maximum number of ADM5120 serial ports"
-+ depends on SERIAL_ADM5120
-+ default "2"
-+ ---help---
-+ Set this to the number of serial ports you want the driver to
-+ support.
-+
- config SERIAL_AMBA_PL010
- tristate "ARM AMBA PL010 serial port support"
- depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
-diff -urN linux-2.6.19.2/drivers/serial/Makefile linux-2.6.19.2-adm5120/drivers/serial/Makefile
---- linux-2.6.19.2/drivers/serial/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/serial/Makefile 2007-01-23 01:21:45.000000000 +0100
-@@ -20,6 +20,7 @@
- obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
- obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
- obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o
-+obj-$(CONFIG_SERIAL_ADM5120) += adm5120_uart.o
- obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
- obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
- obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
-diff -urN linux-2.6.19.2/include/linux/serial_core.h linux-2.6.19.2-adm5120/include/linux/serial_core.h
---- linux-2.6.19.2/include/linux/serial_core.h 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/include/linux/serial_core.h 2007-01-23 01:13:39.000000000 +0100
-@@ -133,6 +133,9 @@
- #define PORT_S3C2412 73
-
-
-+/* ADMtek ADM5120 SoC */
-+#define PORT_ADM5120 68
-+
- #ifdef __KERNEL__
-
- #include <linux/compiler.h>
diff --git a/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch b/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch
deleted file mode 100644
index 40e4fbedf4..0000000000
--- a/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-diff -urN linux-2.6.19.2/drivers/usb/core/hub.c linux-2.6.19.2-adm5120/drivers/usb/core/hub.c
---- linux-2.6.19.2/drivers/usb/core/hub.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/usb/core/hub.c 2007-01-23 01:13:39.000000000 +0100
-@@ -2156,6 +2156,8 @@
- USB_DT_DEVICE << 8, 0,
- buf, GET_DESCRIPTOR_BUFSIZE,
- (i ? USB_CTRL_GET_TIMEOUT : 1000));
-+printk(KERN_CRIT "usb_control_msg: %d %d %d (%d)\n", r, buf->bMaxPacketSize0,
-+buf->bDescriptorType, USB_DT_DEVICE);
- switch (buf->bMaxPacketSize0) {
- case 8: case 16: case 32: case 64: case 255:
- if (buf->bDescriptorType ==
-diff -urN linux-2.6.19.2/drivers/usb/host/Kconfig linux-2.6.19.2-adm5120/drivers/usb/host/Kconfig
---- linux-2.6.19.2/drivers/usb/host/Kconfig 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/usb/host/Kconfig 2007-01-23 01:13:39.000000000 +0100
-@@ -192,3 +192,6 @@
- To compile this driver as a module, choose M here: the
- module will be called "sl811_cs".
-
-+config USB_ADM5120_HCD
-+ tristate "ADM5120 HCD support"
-+ depends on USB && MIPS_ADM5120
-diff -urN linux-2.6.19.2/drivers/usb/host/Makefile linux-2.6.19.2-adm5120/drivers/usb/host/Makefile
---- linux-2.6.19.2/drivers/usb/host/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/usb/host/Makefile 2007-01-23 01:13:39.000000000 +0100
-@@ -16,3 +16,4 @@
- obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
- obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
- obj-$(CONFIG_ETRAX_ARCH_V10) += hc_crisv10.o
-+obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o
-diff -urN linux-2.6.19.2/drivers/usb/Kconfig linux-2.6.19.2-adm5120/drivers/usb/Kconfig
---- linux-2.6.19.2/drivers/usb/Kconfig 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/usb/Kconfig 2007-01-23 01:13:39.000000000 +0100
-@@ -91,8 +91,6 @@
-
- source "drivers/usb/net/Kconfig"
-
--source "drivers/usb/mon/Kconfig"
--
- comment "USB port drivers"
- depends on USB
-
-diff -urN linux-2.6.19.2/drivers/usb/Makefile linux-2.6.19.2-adm5120/drivers/usb/Makefile
---- linux-2.6.19.2/drivers/usb/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/usb/Makefile 2007-01-23 01:22:18.000000000 +0100
-@@ -17,6 +17,7 @@
- obj-$(CONFIG_USB_U132_HCD) += host/
- obj-$(CONFIG_ETRAX_USB_HOST) += host/
- obj-$(CONFIG_USB_OHCI_AT91) += host/
-+obj-$(CONFIG_USB_ADM5120_HCD) += host/
-
- obj-$(CONFIG_USB_ACM) += class/
- obj-$(CONFIG_USB_PRINTER) += class/
diff --git a/target/linux/adm5120-2.6/patches/006-adm5120_gpio.patch b/target/linux/adm5120-2.6/patches/006-adm5120_gpio.patch
deleted file mode 100644
index 593743d7ba..0000000000
--- a/target/linux/adm5120-2.6/patches/006-adm5120_gpio.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-diff -urN linux-2.6.19.2/drivers/char/Kconfig linux-2.6.19.2-adm5120/drivers/char/Kconfig
---- linux-2.6.19.2/drivers/char/Kconfig 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/char/Kconfig 2007-01-23 01:13:39.000000000 +0100
-@@ -1034,7 +1034,9 @@
- The mmtimer device allows direct userspace access to the
- Altix system timer.
-
--source "drivers/char/tpm/Kconfig"
-+config ADM5120_GPIO
-+ tristate "ADM5120 GPIO"
-+ depends on MIPS_ADM5120
-
- config TELCLOCK
- tristate "Telecom clock driver for MPBL0010 ATCA SBC"
-diff -urN linux-2.6.19.2/drivers/char/Makefile linux-2.6.19.2-adm5120/drivers/char/Makefile
---- linux-2.6.19.2/drivers/char/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/char/Makefile 2007-01-23 01:20:01.000000000 +0100
-@@ -90,6 +90,7 @@
- obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
- obj-$(CONFIG_TANBAC_TB0219) += tb0219.o
- obj-$(CONFIG_TELCLOCK) += tlclk.o
-+obj-$(CONFIG_ADM5120_GPIO) += adm5120_gpio.o
-
- obj-$(CONFIG_WATCHDOG) += watchdog/
- obj-$(CONFIG_MWAVE) += mwave/
diff --git a/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch b/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch
deleted file mode 100644
index 25ec59a390..0000000000
--- a/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-diff -urN linux-2.6.21.1/arch/mips/pci/Makefile linux-2.6.21.1-adm5120/arch/mips/pci/Makefile
---- linux-2.6.21.1/arch/mips/pci/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.21.1-adm5120/arch/mips/pci/Makefile 2007-01-23 14:49:40.000000000 +0100
-@@ -53,3 +53,4 @@
- obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
- obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
- obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
-+obj-$(CONFIG_PCI_ADM5120) += fixup-adm5120.o ops-adm5120.o pci-adm5120.o
---- linux-2.6.21.1.old/include/linux/pci_ids.h 2007-04-27 23:49:26.000000000 +0200
-+++ linux-2.6.21.1/include/linux/pci_ids.h 2007-05-31 09:36:56.000000000 +0200
-@@ -1701,6 +1701,9 @@
- #define PCI_VENDOR_ID_ESDGMBH 0x12fe
- #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
-
-+#define PCI_VENDOR_ID_ADMTEK 0x1317
-+#define PCI_DEVICE_ID_ADMTEK_ADM5120 0x5120
-+
- #define PCI_VENDOR_ID_SIIG 0x131f
- #define PCI_SUBVENDOR_ID_SIIG 0x131f
- #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000
diff --git a/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch b/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch
deleted file mode 100644
index 81ec37d05f..0000000000
--- a/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-diff -Nur linux-2.6.19.2/drivers/mtd/Kconfig.old linux-2.6.19.2/drivers/mtd/Kconfig
---- linux-2.6.19.2/drivers/mtd/Kconfig.old 2007-03-25 08:13:02.000000000 +0200
-+++ linux-2.6.19.2/drivers/mtd/Kconfig 2007-03-26 13:37:47.000000000 +0200
-@@ -157,6 +157,22 @@
- for your particular device. It won't happen automatically. The
- 'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
-
-+config MTD_MYLOADER_PARTS
-+ tristate "MyLoader partition parsing"
-+ depends on MIPS_ADM5120 && MTD_PARTITIONS
-+ ---help---
-+ MyLoader is a bootloader which allows the user to define partitions
-+ in flash devices, by putting a table in the second erase block
-+ on the device, similar to a partition table. This table gives the
-+ offsets and lengths of the user defined partitions.
-+
-+ If you need code which can detect and parse these tables, and
-+ register MTD 'partitions' corresponding to each image detected,
-+ enable this option.
-+
-+ You will still need the parsing functions to be called by the driver
-+ for your particular device. It won't happen automatically.
-+
- comment "User Modules And Translation Layers"
- depends on MTD
-
-diff -Nur linux-2.6.19.2/drivers/mtd/Makefile.old linux-2.6.19.2/drivers/mtd/Makefile
---- linux-2.6.19.2/drivers/mtd/Makefile.old 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2/drivers/mtd/Makefile 2007-03-26 13:28:23.000000000 +0200
-@@ -12,6 +12,7 @@
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
-+obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
-
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_CHAR) += mtdchar.o
diff --git a/target/linux/adm5120-2.6/patches/101-mtd-mxflash.patch b/target/linux/adm5120-2.6/patches/101-mtd-mxflash.patch
deleted file mode 100755
index 754a91e09f..0000000000
--- a/target/linux/adm5120-2.6/patches/101-mtd-mxflash.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- linux-2.6.19.2/drivers/mtd/chips/Kconfig.old 2007-01-11 03:10:36.000000000 +0800
-+++ linux-2.6.19.2/drivers/mtd/chips/Kconfig 2007-03-29 14:43:32.000000000 +0800
-@@ -199,6 +199,14 @@
- provides support for one of those command sets, used on chips
- including the AMD Am29LV320.
-
-+config MTD_CFI_AMDSTD_FORCE_BOTTOM_BOOT
-+ bool "Force bottom boot for Macronix flash chips"
-+ depends on MTD_CFI_AMDSTD
-+ help
-+ Some Macronix flash chips have wrong CFI info, and the driver may
-+ detect the type incorrectly. Select this if the chip part number
-+ ends with BTC.
-+
- config MTD_CFI_STAA
- tristate "Support for ST (Advanced Architecture) flash chips"
- depends on MTD_GEN_PROBE
---- linux-2.6.19.2/drivers/mtd/chips/cfi_cmdset_0002.c.old 2007-03-22 16:14:56.000000000 +0800
-+++ linux-2.6.19.2/drivers/mtd/chips/cfi_cmdset_0002.c 2007-03-29 14:07:28.000000000 +0800
-@@ -320,6 +320,11 @@
- cfi_tell_features(extp);
- #endif
-
-+#ifdef CONFIG_MTD_CFI_AMDSTD_FORCE_BOTTOM_BOOT
-+ extp->TopBottom = 2;
-+ bootloc = extp->TopBottom;
-+#endif
-+
- bootloc = extp->TopBottom;
- if ((bootloc != 2) && (bootloc != 3)) {
- printk(KERN_WARNING "%s: CFI does not contain boot "
diff --git a/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch b/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch
deleted file mode 100644
index 23f377c90b..0000000000
--- a/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-diff -ur linux.old/arch/mips/kernel/head.S linux.dev/arch/mips/kernel/head.S
---- linux.old/arch/mips/kernel/head.S 2006-12-06 17:30:27.000000000 +0100
-+++ linux.dev/arch/mips/kernel/head.S 2006-12-06 18:34:43.000000000 +0100
-@@ -129,15 +129,20 @@
- #endif
- .endm
-
--
- j kernel_entry
- nop
--
-+ nop
-+
- /*
- * Reserved space for exception handlers.
- * Necessary for machines which link their kernels at KSEG0.
-+ * Use as temporary storage for the kernel command line, so that it
-+ * can be updated easily without having to relink the kernel.
- */
-- .align 10
-+
-+EXPORT(_image_cmdline)
-+ .ascii "CMDLINE:"
-+ .align 10
-
- EXPORT(stext) # used for profiling
- EXPORT(_stext)
diff --git a/target/linux/adm5120-2.6/patches/500-Nand.patch b/target/linux/adm5120-2.6/patches/500-Nand.patch
deleted file mode 100644
index 05beb20241..0000000000
--- a/target/linux/adm5120-2.6/patches/500-Nand.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
-index cfe288a..c528024 100644
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -55,6 +55,12 @@ config MTD_NAND_TOTO
- help
- Support for NAND flash on Texas Instruments Toto platform.
-
-+config MTD_NAND_RB100
-+ tristate "NAND Flash device on RB100 board"
-+ depends on MTD_NAND
-+ help
-+ Support for NAND flash on RB100 platform.
-+
- config MTD_NAND_IDS
- tristate
-
-diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
-index 4174202..2be57c1 100644
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -8,6 +8,7 @@ obj-$(CONFIG_MTD_NAND_IDS) += nand_ids.
-
- obj-$(CONFIG_MTD_NAND_SPIA) += spia.o
- obj-$(CONFIG_MTD_NAND_TOTO) += toto.o
-+obj-$(CONFIG_MTD_NAND_RB100) += rbmipsnand.o
- obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o
- obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o
- obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o