[ar71xx]: add D-link DGL-5500 A1 support

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43401 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 files changed, 252 insertions, 0 deletions

diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index e39a2b9312..c022013f8f 100755
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -49,6 +49,7 @@ get_status_led() {
 	db120)
 		status_led="db120:green:status"
 		;;
+	dgl-5500-a1 |\
 	dhp-1565-a1|\
 	dir-505-a1 |\
 	dir-600-a1 |\
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
index 3287e6ce12..e205fd514c 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -248,6 +248,7 @@ wzr-hp-g300nh)
 	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
 	;;
 
+dgl-5500-a1 |\
 dir-825-c1)
 	local mac
 	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index a802258817..483a8ded87 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -342,6 +342,9 @@ ar71xx_board_detect() {
 	*"DB120 reference board")
 		name="db120"
 		;;
+	*"DGL-5500 rev. A1")
+		name="dgl-5500-a1"
+		;;
 	*"DHP-1565 rev. A1")
 		name="dhp-1565-a1"
 		;;
diff --git a/target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k b/target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k
new file mode 100644
index 0000000000..c5c60efd57
--- /dev/null
+++ b/target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k
@@ -0,0 +1,37 @@
+#!/bin/sh
+
+. /lib/functions/system.sh
+. /lib/ar71xx.sh
+
+firmware_file="/lib/firmware/ath10k/QCA988X/hw2.0/firmware-3.bin"
+firmware_md5_orig="5163aa8de591f80b06c77f22e9777473"
+firmware_md5_current="$(md5sum $firmware_file)"
+firmware_md5_current="${firmware_md5_current%% *}"
+
+
+do_patch_ath10k_firmware() {
+	# verify md5sum before patching
+	[ "firmware_md5_orig" != "firmware_md5_current" ] || {
+		return
+	}
+
+	# some boards have bogus mac in otp, patch the default mac in the firmware
+	case $(ar71xx_board_name) in
+		dgl-5500-a1)
+			local mac
+			mac=$(mtd_get_mac_ascii nvram wlan1_mac)
+
+			cp $firmware_file /tmp/ath10k-firmware.bin
+			macaddr_2bin $mac | dd of=/tmp/ath10k-firmware.bin \
+				conv=notrunc bs=1 seek=280 count=6
+
+		;;
+	esac
+	[ -f /tmp/ath10k-firmware.bin ] || {
+		return
+	}
+	cp /tmp/ath10k-firmware.bin $firmware_file
+	rm /tmp/ath10k-firmware.bin
+}
+
+boot_hook_add preinit_main do_patch_ath10k_firmware
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 6a85d01df3..2e5b0dd90a 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -194,6 +194,7 @@ platform_check_image() {
 	ap81 | \
 	ap83 | \
 	ap132 | \
+	dgl-5500-a1 |\
 	dhp-1565-a1 |\
 	dir-505-a1 | \
 	dir-600-a1 | \
diff --git a/target/linux/ar71xx/config-3.14 b/target/linux/ar71xx/config-3.14
index e5086afaa4..9ed184b160 100644
--- a/target/linux/ar71xx/config-3.14
+++ b/target/linux/ar71xx/config-3.14
@@ -42,6 +42,7 @@ CONFIG_ATH79_MACH_CAP4200AG=y
 CONFIG_ATH79_MACH_CARAMBOLA2=y
 CONFIG_ATH79_MACH_CPE510=y
 CONFIG_ATH79_MACH_DB120=y
+CONFIG_ATH79_MACH_DGL_5500_A1=y
 CONFIG_ATH79_MACH_DHP_1565_A1=y
 CONFIG_ATH79_MACH_DIR_505_A1=y
 CONFIG_ATH79_MACH_DIR_600_A1=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dgl-5500-a1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dgl-5500-a1.c
new file mode 100644
index 0000000000..91b554e527
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dgl-5500-a1.c
@@ -0,0 +1,150 @@
+/*
+ *  D-Link DGL-5500 board support
+ *
+ *  Copyright (C) 2014 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-eth.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define DGL_5500_A1_GPIO_LED_POWER_ORANGE	14
+#define DGL_5500_A1_GPIO_LED_POWER_GREEN	19
+#define DGL_5500_A1_GPIO_LED_PLANET_GREEN	22
+#define DGL_5500_A1_GPIO_LED_PLANET_ORANGE	23
+
+#define DGL_5500_A1_GPIO_BTN_WPS		16
+#define DGL_5500_A1_GPIO_BTN_RESET		17
+
+#define DGL_5500_A1_KEYS_POLL_INTERVAL		20	/* msecs */
+#define DGL_5500_A1_KEYS_DEBOUNCE_INTERVAL	\
+					(3 * DGL_5500_A1_KEYS_POLL_INTERVAL)
+
+#define DGL_5500_A1_WMAC_CALDATA_OFFSET		0x1000
+
+#define DGL_5500_A1_LAN_MAC_OFFSET	0x04
+#define DGL_5500_A1_WAN_MAC_OFFSET	0x16
+
+static struct gpio_led dgl_5500_a1_leds_gpio[] __initdata = {
+	{
+		.name		= "d-link:green:power",
+		.gpio		= DGL_5500_A1_GPIO_LED_POWER_GREEN,
+		.active_low	= 1,
+	},
+	{
+		.name		= "d-link:orange:power",
+		.gpio		= DGL_5500_A1_GPIO_LED_POWER_ORANGE,
+		.active_low	= 1,
+	},
+	{
+		.name		= "d-link:green:planet",
+		.gpio		= DGL_5500_A1_GPIO_LED_PLANET_GREEN,
+		.active_low	= 1,
+	},
+	{
+		.name		= "d-link:orange:planet",
+		.gpio		= DGL_5500_A1_GPIO_LED_PLANET_ORANGE,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_button dgl_5500_a1_gpio_keys[] __initdata = {
+	{
+		.desc		= "Reset button",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.debounce_interval = DGL_5500_A1_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= DGL_5500_A1_GPIO_BTN_RESET,
+		.active_low	= 1,
+	},
+	{
+		.desc		= "WPS button",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.debounce_interval = DGL_5500_A1_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= DGL_5500_A1_GPIO_BTN_WPS,
+		.active_low	= 1,
+	},
+};
+
+static struct ar8327_pad_cfg dgl_5500_a1_ar8327_pad0_cfg = {
+	/* Use the SGMII interface for the GMAC0 of the AR8327 switch */
+	.mode = AR8327_PAD_MAC_SGMII,
+	.sgmii_delay_en = true,
+};
+
+static struct ar8327_platform_data dgl_5500_a1_ar8327_data = {
+	.pad0_cfg = &dgl_5500_a1_ar8327_pad0_cfg,
+	.port0_cfg = {
+		.force_link = 1,
+		.speed = AR8327_PORT_SPEED_1000,
+		.duplex = 1,
+		.txpause = 1,
+		.rxpause = 1,
+	},
+};
+
+static struct mdio_board_info dgl_5500_a1_mdio0_info[] = {
+	{
+		.bus_id = "ag71xx-mdio.0",
+		.phy_addr = 0,
+		.platform_data = &dgl_5500_a1_ar8327_data,
+	},
+};
+
+static void __init dgl_5500_a1_setup(void)
+{
+	u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000);
+	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+	u8 lan_mac[ETH_ALEN];
+
+	ath79_parse_ascii_mac(mac + DGL_5500_A1_LAN_MAC_OFFSET, lan_mac);
+
+	ath79_register_m25p80(NULL);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(dgl_5500_a1_leds_gpio),
+				 dgl_5500_a1_leds_gpio);
+	ath79_register_gpio_keys_polled(-1, DGL_5500_A1_KEYS_POLL_INTERVAL,
+					ARRAY_SIZE(dgl_5500_a1_gpio_keys),
+					dgl_5500_a1_gpio_keys);
+
+	ath79_register_wmac(art + DGL_5500_A1_WMAC_CALDATA_OFFSET, lan_mac);
+
+	ath79_register_mdio(0, 0x0);
+	mdiobus_register_board_info(dgl_5500_a1_mdio0_info,
+				    ARRAY_SIZE(dgl_5500_a1_mdio0_info));
+
+	ath79_init_mac(ath79_eth1_data.mac_addr, lan_mac, 0);
+
+	/* GMAC1 is connected to an AR8327N switch via the SMGII interface */
+	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+	ath79_eth1_data.phy_mask = BIT(0);
+	ath79_eth1_data.mii_bus_dev = &ath79_mdio0_device.dev;
+
+	ath79_eth1_pll_data.pll_1000 = 0x03000101;
+
+	ath79_register_eth(1);
+
+	ath79_register_usb();
+	ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_DGL_5500_A1, "DGL-5500-A1", "D-Link DGL-5500 rev. A1",
+	     dgl_5500_a1_setup);
diff --git a/target/linux/ar71xx/generic/profiles/d-link.mk b/target/linux/ar71xx/generic/profiles/d-link.mk
index 5079af1ff5..0909df5e17 100644
--- a/target/linux/ar71xx/generic/profiles/d-link.mk
+++ b/target/linux/ar71xx/generic/profiles/d-link.mk
@@ -126,3 +126,15 @@ define Profile/DIR835A1/Description
 endef
 
 $(eval $(call Profile,DIR835A1))
+
+
+define Profile/DGL5500A1
+	NAME:=D-Link DGL-5500 rev. A1
+	PACKAGES:=kmod-usb-core kmod-usb2 kmod-ath10k
+endef
+
+define Profile/DIR5500A1/Description
+	Package set optimized for the D-Link DGL-5500 rev. A1.
+endef
+
+$(eval $(call Profile,DGL5500A1))
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index 1c78898d9d..c94db14a31 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -279,6 +279,7 @@ cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),320k(custom)ro,
 cpe510_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(pation-table)ro,64k(product-info)ro,1536k(kernel),6144k(rootfs),192k(config)ro,64k(ART)ro,7680k@0x40000(firmware)
 eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),13632k(firmware),2048k(failsafe),64k(art)ro
 db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
+dgl_5500_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro
 cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy)
 cameo_ap94_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7808k(firmware),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig)
 esr900_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
@@ -448,6 +449,10 @@ Image/Build/CameoAP99/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap99_mtd
 Image/Build/CameoAP99=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap99_mtdlayout),$(4),65536)
 Image/Build/CameoAP99/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap99_mtdlayout))
 
+Image/Build/CameoAP135/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
+Image/Build/CameoAP135=$(call Image/Build/Cameo,$(1),$(2),$(3),$(4),$(5),26)
+Image/Build/CameoAP135/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
+
 Image/Build/CameoDB120/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout))
 Image/Build/CameoDB120=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout),$(4),26)
 Image/Build/CameoDB120/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout))
@@ -1160,6 +1165,8 @@ $(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,TEW712BR,tew-712br,TEW-712B
 $(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,DIR601B1,dir-601-b1,TEW-712BR,ttyATH0,115200,"HORNET-RT-DIR601B1-3",2.99.99,"" "NA"))
 $(eval $(call SingleProfile,CameoAP121_8M,64kraw-nojffs,DIR505A1,dir-505-a1,DIR-505-A1,ttyATH0,115200,"HORNET-PACKET-DIR505A1-3",1.99.99,""))
 
+$(eval $(call SingleProfile,CameoAP135,64kraw,DGL5500A1,dgl-5500-a1,DGL-5500-A1,ttyS0,115200,$$(dgl_5500_mtdlayout),"00AP135AR9558-RT-130508-00"))
+
 $(eval $(call SingleProfile,CameoDB120,64kraw,DHP1565A1,dhp-1565-a1,DHP-1565-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
 $(eval $(call SingleProfile,CameoDB120,64kraw,DIR825C1,dir-825-c1,DIR-825-C1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
 $(eval $(call SingleProfile,CameoDB120,64kraw,DIR835A1,dir-835-a1,DIR-835-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
diff --git a/target/linux/ar71xx/patches-3.14/733-MIPS-ath79-add-DGL-5500-A1.patch b/target/linux/ar71xx/patches-3.14/733-MIPS-ath79-add-DGL-5500-A1.patch
new file mode 100644
index 0000000000..714d9e6edd
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.14/733-MIPS-ath79-add-DGL-5500-A1.patch
@@ -0,0 +1,39 @@
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -40,6 +40,7 @@ enum ath79_mach_type {
+ 	ATH79_MACH_CPE510,		/* TP-LINK CPE510 */
+ 	ATH79_MACH_DB120,		/* Atheros DB120 reference board */
+ 	ATH79_MACH_PB44,		/* Atheros PB44 reference board */
++	ATH79_MACH_DGL_5500_A1,		/* D-link DGL-5500 rev. A1 */
+ 	ATH79_MACH_DHP_1565_A1,		/* D-Link DHP-1565 rev. A1 */
+ 	ATH79_MACH_DIR_505_A1,		/* D-Link DIR-505 rev. A1 */
+ 	ATH79_MACH_DIR_600_A1,		/* D-Link DIR-600 rev. A1 */
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -55,6 +55,7 @@ obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)
+ obj-$(CONFIG_ATH79_MACH_CAP4200AG)	+= mach-cap4200ag.o
+ obj-$(CONFIG_ATH79_MACH_CPE510)		+= mach-cpe510.o
+ obj-$(CONFIG_ATH79_MACH_DB120)		+= mach-db120.o
++obj-$(CONFIG_ATH79_MACH_DGL_5500_A1)	+= mach-dgl-5500-a1.o
+ obj-$(CONFIG_ATH79_MACH_DHP_1565_A1)	+= mach-dhp-1565-a1.o
+ obj-$(CONFIG_ATH79_MACH_DIR_505_A1)	+= mach-dir-505-a1.o
+ obj-$(CONFIG_ATH79_MACH_DIR_600_A1)	+= mach-dir-600-a1.o
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -293,6 +293,16 @@ config ATH79_MACH_WPE72
+ 	select ATH79_DEV_USB
+ 	select MYLOADER
+ 
++config ATH79_MACH_DGL_5500_A1
++	bool "D-Link DGL-5500 A1 support"
++	select SOC_QCA955X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++	select ATH79_DEV_USB
++
+ config ATH79_MACH_DHP_1565_A1
+ 	bool "D-Link DHP-1565 rev. A1 board support"
+ 	select SOC_AR934X