[ar71xx] make the AP83 and VSC7385 SPI drivers available on 2.6.2[89]

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16351 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 files changed, 106 insertions, 0 deletions

diff --git a/target/linux/ar71xx/config-2.6.28 b/target/linux/ar71xx/config-2.6.28
index 2fcd9ccddb..6148e60d26 100644
--- a/target/linux/ar71xx/config-2.6.28
+++ b/target/linux/ar71xx/config-2.6.28
@@ -177,11 +177,13 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=1
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 CONFIG_SPI=y
+CONFIG_SPI_AP83=y
 CONFIG_SPI_AR71XX=y
 CONFIG_SPI_BITBANG=y
 CONFIG_SPI_GPIO=y
 CONFIG_SPI_MASTER=y
 # CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_VSC7385 is not set
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_SYS_HAS_CPU_MIPS32_R2=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
diff --git a/target/linux/ar71xx/config-2.6.29 b/target/linux/ar71xx/config-2.6.29
index 7acfbb826c..59265aa69b 100644
--- a/target/linux/ar71xx/config-2.6.29
+++ b/target/linux/ar71xx/config-2.6.29
@@ -182,11 +182,13 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=1
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 CONFIG_SPI=y
+CONFIG_SPI_AP83=y
 CONFIG_SPI_AR71XX=y
 CONFIG_SPI_BITBANG=y
 CONFIG_SPI_GPIO=y
 CONFIG_SPI_MASTER=y
 # CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_VSC7385 is not set
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_SYS_HAS_CPU_MIPS32_R2=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
diff --git a/target/linux/ar71xx/patches-2.6.28/201-ap83_spi_controller.patch b/target/linux/ar71xx/patches-2.6.28/201-ap83_spi_controller.patch
new file mode 100644
index 0000000000..a8e889a7bd
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.28/201-ap83_spi_controller.patch
@@ -0,0 +1,27 @@
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -11,6 +11,7 @@ endif
+ obj-$(CONFIG_SPI_MASTER)		+= spi.o
+ 
+ # SPI master controller drivers (bus)
++obj-$(CONFIG_SPI_AP83)			+= ap83_spi.o
+ obj-$(CONFIG_SPI_AR71XX)		+= ar71xx_spi.o
+ obj-$(CONFIG_SPI_ATMEL)			+= atmel_spi.o
+ obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.o
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -53,6 +53,14 @@ if SPI_MASTER
+ 
+ comment "SPI Master Controller Drivers"
+ 
++config SPI_AP83
++	tristate "Atheros AP83 specific SPI Controller"
++	depends on SPI_MASTER && AR71XX_MACH_AP83
++	select SPI_BITBANG
++	help
++	  This is a specific SPI controller driver for the Atheros AP83
++	  reference board.
++
+ config SPI_AR71XX
+ 	tristate "Atheros AR71xx SPI Controller"
+ 	depends on SPI_MASTER && ATHEROS_AR71XX
diff --git a/target/linux/ar71xx/patches-2.6.28/202-spi_vsc7385_driver.patch b/target/linux/ar71xx/patches-2.6.28/202-spi_vsc7385_driver.patch
new file mode 100644
index 0000000000..26f6156dab
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.28/202-spi_vsc7385_driver.patch
@@ -0,0 +1,24 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -283,6 +283,11 @@ config SPI_TLE62X0
+ 	  sysfs interface, with each line presented as a kind of GPIO
+ 	  exposing both switch control and diagnostic feedback.
+ 
++config SPI_VSC7385
++	tristate "Vitesse VSC7385 ethernet switch driver"
++	help
++	  SPI driver for the Vitesse VSC7385 ethernet switch.
++
+ #
+ # Add new SPI protocol masters in alphabetical order above this line
+ #
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -38,6 +38,7 @@ obj-$(CONFIG_SPI_SH_SCI)		+= spi_sh_sci.
+ # SPI protocol drivers (device/link on bus)
+ obj-$(CONFIG_SPI_AT25)		+= at25.o
+ obj-$(CONFIG_SPI_SPIDEV)	+= spidev.o
++obj-$(CONFIG_SPI_VSC7385)	+= spi_vsc7385.o
+ obj-$(CONFIG_SPI_TLE62X0)	+= tle62x0.o
+ # 	... add above this line ...
+ 
diff --git a/target/linux/ar71xx/patches-2.6.29/201-ap83_spi_controller.patch b/target/linux/ar71xx/patches-2.6.29/201-ap83_spi_controller.patch
new file mode 100644
index 0000000000..a8e889a7bd
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.29/201-ap83_spi_controller.patch
@@ -0,0 +1,27 @@
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -11,6 +11,7 @@ endif
+ obj-$(CONFIG_SPI_MASTER)		+= spi.o
+ 
+ # SPI master controller drivers (bus)
++obj-$(CONFIG_SPI_AP83)			+= ap83_spi.o
+ obj-$(CONFIG_SPI_AR71XX)		+= ar71xx_spi.o
+ obj-$(CONFIG_SPI_ATMEL)			+= atmel_spi.o
+ obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.o
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -53,6 +53,14 @@ if SPI_MASTER
+ 
+ comment "SPI Master Controller Drivers"
+ 
++config SPI_AP83
++	tristate "Atheros AP83 specific SPI Controller"
++	depends on SPI_MASTER && AR71XX_MACH_AP83
++	select SPI_BITBANG
++	help
++	  This is a specific SPI controller driver for the Atheros AP83
++	  reference board.
++
+ config SPI_AR71XX
+ 	tristate "Atheros AR71xx SPI Controller"
+ 	depends on SPI_MASTER && ATHEROS_AR71XX
diff --git a/target/linux/ar71xx/patches-2.6.29/202-spi_vsc7385_driver.patch b/target/linux/ar71xx/patches-2.6.29/202-spi_vsc7385_driver.patch
new file mode 100644
index 0000000000..b071d5d21c
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.29/202-spi_vsc7385_driver.patch
@@ -0,0 +1,24 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -272,6 +272,11 @@ config SPI_TLE62X0
+ 	  sysfs interface, with each line presented as a kind of GPIO
+ 	  exposing both switch control and diagnostic feedback.
+ 
++config SPI_VSC7385
++	tristate "Vitesse VSC7385 ethernet switch driver"
++	help
++	  SPI driver for the Vitesse VSC7385 ethernet switch.
++
+ #
+ # Add new SPI protocol masters in alphabetical order above this line
+ #
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -37,6 +37,7 @@ obj-$(CONFIG_SPI_SH_SCI)		+= spi_sh_sci.
+ 
+ # SPI protocol drivers (device/link on bus)
+ obj-$(CONFIG_SPI_SPIDEV)	+= spidev.o
++obj-$(CONFIG_SPI_VSC7385)	+= spi_vsc7385.o
+ obj-$(CONFIG_SPI_TLE62X0)	+= tle62x0.o
+ # 	... add above this line ...
+