upgrade AVR32 to 2.6.24 - sync with 2.6.24.atmel.1

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10412 3c298f89-4303-0410-b956-a3cf2f4a3e73

3 files changed, 11665 insertions, 5992 deletions

diff --git a/target/linux/avr32/Makefile b/target/linux/avr32/Makefile
index 0530a49122..77b8c96f95 100644
--- a/target/linux/avr32/Makefile
+++ b/target/linux/avr32/Makefile
@@ -10,7 +10,7 @@ ARCH:=avr32
 BOARD:=avr32
 BOARDNAME:=Atmel AVR32
 FEATURES:=squashfs
-LINUX_VERSION:=2.6.23.1
+LINUX_VERSION:=2.6.24
 
 include $(INCLUDE_DIR)/target.mk
 
diff --git a/target/linux/avr32/config-2.6.23 b/target/linux/avr32/config-default
index 75520b4569..f33525780e 100644
--- a/target/linux/avr32/config-2.6.23
+++ b/target/linux/avr32/config-default
@@ -1,8 +1,9 @@
-CONFIG_AP7000_16_BIT_SMC=y
-# CONFIG_AP7000_32_BIT_SMC is not set
-# CONFIG_AP7000_8_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_32_BIT_SMC is not set
+# CONFIG_AP700X_8_BIT_SMC is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 # CONFIG_ATM_DRIVERS is not set
+# CONFIG_ATMEL_PWM is not set
 # CONFIG_ATMEL_SSC is not set
 CONFIG_AVR32=y
 CONFIG_BOARD_ATNGW100=y
@@ -11,15 +12,17 @@ CONFIG_BOARD_ATNGW100=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_BT is not set
 CONFIG_CPU_AT32AP7000=y
-CONFIG_CPU_FREQ=y
+# CONFIG_CPU_FREQ is not set
 # CONFIG_CPU_FREQ_DEBUG is not set
 # CONFIG_CPU_FREQ_STAT is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
 # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_AT32AP=y
 CONFIG_DW_DMAC=y
@@ -36,6 +39,7 @@ CONFIG_HZ_250=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_LEDS_GPIO=y
 CONFIG_MACB=y
+# CONFIG_MDIO_BITBANG is not set
 # CONFIG_MTD_ABSENT is not set
 CONFIG_MTD_BLKDEVS=y
 # CONFIG_MTD_BLOCK2MTD is not set
@@ -85,6 +89,7 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_SLRAM is not set
 CONFIG_MTD=y
+# CONFIG_NMI_DEBUGGING is not set
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_PHYS_OFFSET=0x10000000
 CONFIG_PLATFORM_AT32AP=y
@@ -92,6 +97,7 @@ CONFIG_PLATFORM_AT32AP=y
 # CONFIG_RTC is not set
 # CONFIG_SERIAL_8250 is not set
 CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
 # CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_ATMEL=y
 # CONFIG_SMSC_PHY is not set
diff --git a/target/linux/avr32/patches/100-git_sync.patch b/target/linux/avr32/patches/100-git_sync.patch
index 6ce6259b6a..bfbc8c1d2b 100644
--- a/target/linux/avr32/patches/100-git_sync.patch
+++ b/target/linux/avr32/patches/100-git_sync.patch
@@ -1,136 +1,312 @@
- MAINTAINERS                             |    7 +
- Makefile                                |    2 +-
- arch/avr32/Kconfig                      |    7 +
- arch/avr32/Makefile                     |    1 +
- arch/avr32/boards/atngw100/Kconfig      |   12 +
- arch/avr32/boards/atngw100/flash.c      |    5 +-
- arch/avr32/boards/atngw100/setup.c      |   26 +-
- arch/avr32/boards/atstk1000/Kconfig     |   12 +
- arch/avr32/boards/atstk1000/atstk1002.c |   72 ++
- arch/avr32/boards/atstk1000/flash.c     |    5 +-
- arch/avr32/configs/atngw100_defconfig   |  201 +++-
- arch/avr32/configs/atstk1002_defconfig  |  354 +++++-
- arch/avr32/drivers/Makefile             |    1 +
- arch/avr32/drivers/dw-dmac.c            |  761 ++++++++++++
- arch/avr32/drivers/dw-dmac.h            |   42 +
- arch/avr32/kernel/Makefile              |    6 +-
- arch/avr32/kernel/dma-controller.c      |   34 +
- arch/avr32/kernel/entry-avr32b.S        |   26 +-
- arch/avr32/kernel/setup.c               |    2 +-
- arch/avr32/kernel/vmlinux.lds.S         |  143 +++
- arch/avr32/kernel/vmlinux.lds.c         |  142 ---
- arch/avr32/mach-at32ap/Kconfig          |    7 +
- arch/avr32/mach-at32ap/Makefile         |    1 +
- arch/avr32/mach-at32ap/at32ap7000.c     |  241 ++++-
- arch/avr32/mach-at32ap/clock.c          |  116 ++
- arch/avr32/mach-at32ap/gpio-dev.c       |  573 +++++++++
- arch/avr32/mach-at32ap/hsmc.c           |  129 ++-
- arch/avr32/mach-at32ap/pio.c            |   80 ++
- arch/avr32/mach-at32ap/pm.h             |    8 +
- arch/avr32/mm/dma-coherent.c            |    7 +
- arch/avr32/mm/init.c                    |   12 +-
- drivers/i2c/busses/Kconfig              |    8 +
- drivers/i2c/busses/Makefile             |    1 +
- drivers/i2c/busses/i2c-atmeltwi.c       |  436 +++++++
- drivers/i2c/busses/i2c-atmeltwi.h       |  117 ++
- drivers/misc/Kconfig                    |    9 +
- drivers/misc/Makefile                   |    1 +
- drivers/misc/atmel-ssc.c                |  174 +++
- drivers/mmc/host/Kconfig                |   10 +
- drivers/mmc/host/Makefile               |    1 +
- drivers/mmc/host/atmel-mci.c            | 1161 ++++++++++++++++++
- drivers/mmc/host/atmel-mci.h            |  192 +++
- drivers/mtd/chips/cfi_cmdset_0001.c     |   43 +
- drivers/mtd/chips/cfi_cmdset_0002.c     |    6 +-
- drivers/spi/atmel_spi.c                 |    4 +-
- drivers/usb/gadget/Kconfig              |   26 +-
- drivers/usb/gadget/Makefile             |    1 +
- drivers/usb/gadget/atmel_usba_udc.c     | 2038 +++++++++++++++++++++++++++++++
- drivers/usb/gadget/atmel_usba_udc.h     |  350 ++++++
- drivers/video/atmel_lcdfb.c             |    6 +-
- drivers/video/backlight/Kconfig         |   12 +
- drivers/video/backlight/Makefile        |    2 +
- drivers/video/backlight/ltv350qv.c      |  339 +++++
- drivers/video/backlight/ltv350qv.h      |   95 ++
- include/asm-avr32/arch-at32ap/board.h   |   20 +
- include/asm-avr32/arch-at32ap/portmux.h |   13 +
- include/asm-avr32/arch-at32ap/smc.h     |   51 +-
- include/asm-avr32/dma-controller.h      |  166 +++
- include/asm-avr32/dma-mapping.h         |   17 +-
- include/asm-avr32/system.h              |   13 +-
- include/asm-avr32/unistd.h              |   13 +
- include/linux/atmel-ssc.h               |  312 +++++
- include/linux/spi/at73c213.h            |   25 +
- scripts/checkstack.pl                   |    5 +
- sound/Kconfig                           |    6 +
- sound/Makefile                          |    3 +-
- sound/avr32/Kconfig                     |   11 +
- sound/avr32/Makefile                    |    3 +
- sound/avr32/ac97c.c                     |  914 ++++++++++++++
- sound/avr32/ac97c.h                     |   71 ++
- sound/oss/Kconfig                       |    4 +
- sound/oss/Makefile                      |    1 +
- sound/oss/at32_abdac.c                  |  722 +++++++++++
- sound/oss/at32_abdac.h                  |   59 +
- sound/spi/Kconfig                       |   31 +
- sound/spi/Makefile                      |    5 +
- sound/spi/at73c213.c                    | 1121 +++++++++++++++++
- sound/spi/at73c213.h                    |  119 ++
- 78 files changed, 11500 insertions(+), 272 deletions(-)
+ Documentation/kernel-parameters.txt        |    5 +
+ MAINTAINERS                                |    6 +
+ Makefile                                   |    2 +-
+ arch/arm/mach-at91/at91sam9261_devices.c   |   14 +
+ arch/arm/mach-at91/at91sam9rl_devices.c    |   14 +
+ arch/arm/mach-at91/board-sam9261ek.c       |    1 +
+ arch/arm/mach-at91/board-sam9263ek.c       |    1 +
+ arch/avr32/Kconfig                         |   54 +-
+ arch/avr32/Kconfig.debug                   |   10 -
+ arch/avr32/Makefile                        |    4 +-
+ arch/avr32/boards/atngw100/Kconfig         |   12 +
+ arch/avr32/boards/atngw100/setup.c         |   14 +-
+ arch/avr32/boards/atstk1000/Kconfig        |  101 ++-
+ arch/avr32/boards/atstk1000/Makefile       |    2 +
+ arch/avr32/boards/atstk1000/atstk1000.h    |    2 +
+ arch/avr32/boards/atstk1000/atstk1002.c    |  129 +--
+ arch/avr32/boards/atstk1000/atstk1003.c    |  181 +++
+ arch/avr32/boards/atstk1000/atstk1004.c    |  152 +++
+ arch/avr32/boards/atstk1000/setup.c        |   64 +
+ arch/avr32/configs/atngw100_defconfig      |  423 +++++---
+ arch/avr32/configs/atstk1002_defconfig     |  661 ++++++++---
+ arch/avr32/configs/atstk1003_defconfig     | 1032 ++++++++++++++++
+ arch/avr32/configs/atstk1004_defconfig     |  627 ++++++++++
+ arch/avr32/drivers/Makefile                |    1 +
+ arch/avr32/drivers/dw-dmac.c               |  761 ++++++++++++
+ arch/avr32/drivers/dw-dmac.h               |   42 +
+ arch/avr32/kernel/Makefile                 |    4 +-
+ arch/avr32/kernel/cpu.c                    |   96 ++-
+ arch/avr32/kernel/dma-controller.c         |   34 +
+ arch/avr32/kernel/irq.c                    |   11 +
+ arch/avr32/kernel/kprobes.c                |    5 +-
+ arch/avr32/kernel/nmi_debug.c              |   82 ++
+ arch/avr32/kernel/ocd.c                    |  163 +++
+ arch/avr32/kernel/process.c                |    5 +-
+ arch/avr32/kernel/ptrace.c                 |    5 +-
+ arch/avr32/kernel/setup.c                  |    2 +
+ arch/avr32/kernel/signal.c                 |    7 -
+ arch/avr32/kernel/traps.c                  |   21 +-
+ arch/avr32/mach-at32ap/Kconfig             |   19 +-
+ arch/avr32/mach-at32ap/Makefile            |    5 +-
+ arch/avr32/mach-at32ap/at32ap7000.c        | 1730 --------------------------
+ arch/avr32/mach-at32ap/at32ap700x.c        | 1809 ++++++++++++++++++++++++++++
+ arch/avr32/mach-at32ap/extint.c            |   59 +-
+ arch/avr32/mach-at32ap/gpio-dev.c          |  573 +++++++++
+ arch/avr32/mach-at32ap/pio.c               |   76 ++
+ arch/avr32/mm/dma-coherent.c               |    7 +
+ arch/avr32/mm/tlb.c                        |    2 +-
+ arch/avr32/oprofile/Makefile               |    8 +
+ arch/avr32/oprofile/op_model_avr32.c       |  235 ++++
+ drivers/i2c/busses/Kconfig                 |    8 +
+ drivers/i2c/busses/Makefile                |    1 +
+ drivers/i2c/busses/i2c-atmeltwi.c          |  436 +++++++
+ drivers/i2c/busses/i2c-atmeltwi.h          |  117 ++
+ drivers/leds/Kconfig                       |    7 +
+ drivers/leds/Makefile                      |    1 +
+ drivers/leds/leds-atmel-pwm.c              |  155 +++
+ drivers/misc/Kconfig                       |    9 +
+ drivers/misc/Makefile                      |    1 +
+ drivers/misc/atmel_pwm.c                   |  409 +++++++
+ drivers/mmc/host/Kconfig                   |   10 +
+ drivers/mmc/host/Makefile                  |    1 +
+ drivers/mmc/host/atmel-mci.c               | 1176 ++++++++++++++++++
+ drivers/mmc/host/atmel-mci.h               |  192 +++
+ drivers/mtd/chips/cfi_cmdset_0001.c        |   43 +
+ drivers/mtd/chips/cfi_cmdset_0002.c        |    6 +-
+ drivers/pcmcia/Kconfig                     |    7 +
+ drivers/pcmcia/Makefile                    |    1 +
+ drivers/pcmcia/at32_cf.c                   |  533 ++++++++
+ drivers/serial/Kconfig                     |   15 +
+ drivers/serial/atmel_serial.c              |  884 +++++++++++---
+ drivers/spi/atmel_spi.c                    |  173 ++-
+ drivers/video/atmel_lcdfb.c                |  149 +++-
+ drivers/video/backlight/Kconfig            |   13 +
+ drivers/video/console/Kconfig              |    2 +-
+ drivers/watchdog/Kconfig                   |    2 +-
+ include/asm-avr32/arch-at32ap/at32ap7000.h |   35 -
+ include/asm-avr32/arch-at32ap/at32ap700x.h |   35 +
+ include/asm-avr32/arch-at32ap/board.h      |   11 +-
+ include/asm-avr32/arch-at32ap/cpu.h        |    2 +-
+ include/asm-avr32/arch-at32ap/io.h         |    4 +-
+ include/asm-avr32/arch-at32ap/portmux.h    |   12 +
+ include/asm-avr32/dma-controller.h         |  166 +++
+ include/asm-avr32/irq.h                    |    5 +
+ include/asm-avr32/kdebug.h                 |    1 +
+ include/asm-avr32/ocd.h                    |    5 +
+ include/asm-avr32/processor.h              |   14 +
+ include/asm-avr32/ptrace.h                 |   13 +-
+ include/asm-avr32/thread_info.h            |    1 +
+ include/linux/atmel_pwm.h                  |   70 ++
+ include/video/atmel_lcdc.h                 |   25 +-
+ kernel/ptrace.c                            |    2 +
+ sound/Kconfig                              |    2 +
+ sound/Makefile                             |    2 +-
+ sound/avr32/Kconfig                        |   11 +
+ sound/avr32/Makefile                       |    3 +
+ sound/avr32/ac97c.c                        |  914 ++++++++++++++
+ sound/avr32/ac97c.h                        |   71 ++
+ sound/oss/Kconfig                          |    4 +
+ sound/oss/Makefile                         |    1 +
+ sound/oss/at32_abdac.c                     |  722 +++++++++++
+ sound/oss/at32_abdac.h                     |   59 +
+ 101 files changed, 13294 insertions(+), 2520 deletions(-)
  create mode 100644 arch/avr32/boards/atngw100/Kconfig
+ create mode 100644 arch/avr32/boards/atstk1000/atstk1003.c
+ create mode 100644 arch/avr32/boards/atstk1000/atstk1004.c
+ create mode 100644 arch/avr32/configs/atstk1003_defconfig
+ create mode 100644 arch/avr32/configs/atstk1004_defconfig
  create mode 100644 arch/avr32/drivers/Makefile
  create mode 100644 arch/avr32/drivers/dw-dmac.c
  create mode 100644 arch/avr32/drivers/dw-dmac.h
  create mode 100644 arch/avr32/kernel/dma-controller.c
- create mode 100644 arch/avr32/kernel/vmlinux.lds.S
- delete mode 100644 arch/avr32/kernel/vmlinux.lds.c
+ create mode 100644 arch/avr32/kernel/nmi_debug.c
+ create mode 100644 arch/avr32/kernel/ocd.c
+ delete mode 100644 arch/avr32/mach-at32ap/at32ap7000.c
+ create mode 100644 arch/avr32/mach-at32ap/at32ap700x.c
  create mode 100644 arch/avr32/mach-at32ap/gpio-dev.c
+ create mode 100644 arch/avr32/oprofile/Makefile
+ create mode 100644 arch/avr32/oprofile/op_model_avr32.c
  create mode 100644 drivers/i2c/busses/i2c-atmeltwi.c
  create mode 100644 drivers/i2c/busses/i2c-atmeltwi.h
- create mode 100644 drivers/misc/atmel-ssc.c
+ create mode 100644 drivers/leds/leds-atmel-pwm.c
+ create mode 100644 drivers/misc/atmel_pwm.c
  create mode 100644 drivers/mmc/host/atmel-mci.c
  create mode 100644 drivers/mmc/host/atmel-mci.h
- create mode 100644 drivers/usb/gadget/atmel_usba_udc.c
- create mode 100644 drivers/usb/gadget/atmel_usba_udc.h
- create mode 100644 drivers/video/backlight/ltv350qv.c
- create mode 100644 drivers/video/backlight/ltv350qv.h
+ create mode 100644 drivers/pcmcia/at32_cf.c
+ delete mode 100644 include/asm-avr32/arch-at32ap/at32ap7000.h
+ create mode 100644 include/asm-avr32/arch-at32ap/at32ap700x.h
  create mode 100644 include/asm-avr32/dma-controller.h
- create mode 100644 include/linux/atmel-ssc.h
- create mode 100644 include/linux/spi/at73c213.h
+ create mode 100644 include/linux/atmel_pwm.h
  create mode 100644 sound/avr32/Kconfig
  create mode 100644 sound/avr32/Makefile
  create mode 100644 sound/avr32/ac97c.c
  create mode 100644 sound/avr32/ac97c.h
  create mode 100644 sound/oss/at32_abdac.c
  create mode 100644 sound/oss/at32_abdac.h
- create mode 100644 sound/spi/Kconfig
- create mode 100644 sound/spi/Makefile
- create mode 100644 sound/spi/at73c213.c
- create mode 100644 sound/spi/at73c213.h
 
+diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
+index c417877..17fc60e 100644
+--- a/Documentation/kernel-parameters.txt
++++ b/Documentation/kernel-parameters.txt
+@@ -34,6 +34,7 @@ parameter is applicable:
+ 	ALSA	ALSA sound support is enabled.
+ 	APIC	APIC support is enabled.
+ 	APM	Advanced Power Management support is enabled.
++	AVR32	AVR32 architecture is enabled.
+ 	AX25	Appropriate AX.25 support is enabled.
+ 	BLACKFIN Blackfin architecture is enabled.
+ 	DRM	Direct Rendering Management support is enabled.
+@@ -1123,6 +1124,10 @@ and is between 256 and 4096 characters. It is defined in the file
+ 			of returning the full 64-bit number.
+ 			The default is to return 64-bit inode numbers.
+ 
++	nmi_debug=	[KNL,AVR32] Specify one or more actions to take
++			when a NMI is triggered.
++			Format: [state][,regs][,debounce][,die]
++
+ 	nmi_watchdog=	[KNL,BUGS=X86-32] Debugging features for SMP kernels
+ 
+ 	no387		[BUGS=X86-32] Tells the kernel to use the 387 maths
 diff --git a/MAINTAINERS b/MAINTAINERS
-index 9a91d9e..587afe3 100644
+index 2340cfb..e349a9e 100644
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -669,6 +669,13 @@ P:	Haavard Skinnemoen
- M:	hskinnemoen@atmel.com
- S:	Supported
+@@ -671,6 +671,12 @@ W:	http://www.atmel.com/products/AT91/
+ W:	http://www.at91.com/
+ S:	Maintained
  
-+ATMEL USBA UDC DRIVER
++ATMEL AT91 / AT32 SERIAL DRIVER
 +P:	Haavard Skinnemoen
 +M:	hskinnemoen@atmel.com
-+L:	kernel@avr32linux.org
-+W:	http://avr32linux.org/twiki/bin/view/Main/AtmelUsbDeviceDriver
++L:	linux-kernel@vger.kernel.org
 +S:	Supported
 +
- ATMEL WIRELESS DRIVER
- P:	Simon Kelley
- M:	simon@thekelleys.org.uk
+ ATMEL LCDFB DRIVER
+ P:	Nicolas Ferre
+ M:	nicolas.ferre@atmel.com
+diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
+index 64979a9..bfa3d18 100644
+--- a/arch/arm/mach-at91/at91sam9261_devices.c
++++ b/arch/arm/mach-at91/at91sam9261_devices.c
+@@ -530,6 +530,20 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+ 	at91_set_B_periph(AT91_PIN_PB27, 0);	/* LCDD22 */
+ 	at91_set_B_periph(AT91_PIN_PB28, 0);	/* LCDD23 */
+ 
++#ifdef CONFIG_FB_INTSRAM
++	{
++		void __iomem *fb;
++		struct resource *fb_res = &lcdc_resources[2];
++		size_t fb_len = fb_res->end - fb_res->start + 1;
++
++		fb = ioremap_writecombine(fb_res->start, fb_len);
++		if (fb) {
++			memset(fb, 0, fb_len);
++			iounmap(fb, fb_len);
++		}
++	}
++#endif
++
+ 	lcdc_data = *data;
+ 	platform_device_register(&at91_lcdc_device);
+ }
+diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
+index 2bd60a3..84ee029 100644
+--- a/arch/arm/mach-at91/at91sam9rl_devices.c
++++ b/arch/arm/mach-at91/at91sam9rl_devices.c
+@@ -375,6 +375,20 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+ 	at91_set_B_periph(AT91_PIN_PC24, 0);	/* LCDD22 */
+ 	at91_set_B_periph(AT91_PIN_PC25, 0);	/* LCDD23 */
+ 
++#ifdef CONFIG_FB_INTSRAM
++	{
++		void __iomem *fb;
++		struct resource *fb_res = &lcdc_resources[2];
++		size_t fb_len = fb_res->end - fb_res->start + 1;
++
++		fb = ioremap_writecombine(fb_res->start, fb_len);
++		if (fb) {
++			memset(fb, 0, fb_len);
++			iounmap(fb, fb_len);
++		}
++	}
++#endif
++
+ 	lcdc_data = *data;
+ 	platform_device_register(&at91_lcdc_device);
+ }
+diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
+index 550ae59..0d275bb 100644
+--- a/arch/arm/mach-at91/board-sam9261ek.c
++++ b/arch/arm/mach-at91/board-sam9261ek.c
+@@ -322,6 +322,7 @@ static void at91_lcdc_power_control(int on)
+ 
+ /* Driver datas */
+ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
++	.lcdcon_is_backlight		= true,
+ 	.default_bpp			= 16,
+ 	.default_dmacon			= ATMEL_LCDC_DMAEN,
+ 	.default_lcdcon2		= AT91SAM9261_DEFAULT_LCDCON2,
+diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
+index ab9dcc0..39bded2 100644
+--- a/arch/arm/mach-at91/board-sam9263ek.c
++++ b/arch/arm/mach-at91/board-sam9263ek.c
+@@ -250,6 +250,7 @@ static void at91_lcdc_power_control(int on)
+ 
+ /* Driver datas */
+ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
++	.lcdcon_is_backlight		= true,
+ 	.default_bpp			= 16,
+ 	.default_dmacon			= ATMEL_LCDC_DMAEN,
+ 	.default_lcdcon2		= AT91SAM9263_DEFAULT_LCDCON2,
 diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
-index d12346a..ec6c7c5 100644
+index b77abce..3f09270 100644
 --- a/arch/avr32/Kconfig
 +++ b/arch/avr32/Kconfig
-@@ -116,6 +116,9 @@ endchoice
+@@ -54,6 +54,9 @@ config ARCH_HAS_ILOG2_U32
+ config ARCH_HAS_ILOG2_U64
+ 	def_bool n
+ 
++config ARCH_SUPPORTS_OPROFILE
++	def_bool y
++
+ config GENERIC_HWEIGHT
+ 	def_bool y
+ 
+@@ -81,19 +84,23 @@ config PLATFORM_AT32AP
+ 	select MMU
+ 	select PERFORMANCE_COUNTERS
+ 
+-choice
+-	prompt "AVR32 CPU type"
+-	default CPU_AT32AP7000
++#
++# CPU types
++#
+ 
+-config CPU_AT32AP7000
+-	bool "AT32AP7000"
++# AP7000 derivatives
++config CPU_AT32AP700X
++	bool
+ 	select PLATFORM_AT32AP
+-endchoice
+-
+-#
+-# CPU Daughterboards for ATSTK1000
+-config BOARD_ATSTK1002
++config CPU_AT32AP7000
++	bool
++	select CPU_AT32AP700X
++config CPU_AT32AP7001
++	bool
++	select CPU_AT32AP700X
++config CPU_AT32AP7002
+ 	bool
++	select CPU_AT32AP700X
+ 
+ choice
+ 	prompt "AVR32 board type"
+@@ -101,15 +108,18 @@ choice
+ 
+ config BOARD_ATSTK1000
+ 	bool "ATSTK1000 evaluation board"
+-	select BOARD_ATSTK1002 if CPU_AT32AP7000
+ 
+ config BOARD_ATNGW100
+ 	bool "ATNGW100 Network Gateway"
++	select CPU_AT32AP7000
+ endchoice
+ 
  if BOARD_ATSTK1000
  source "arch/avr32/boards/atstk1000/Kconfig"
  endif
@@ -140,10 +316,39 @@ index d12346a..ec6c7c5 100644
  
  choice
  	prompt "Boot loader type"
-@@ -175,6 +178,10 @@ config OWNERSHIP_TRACE
+@@ -123,15 +133,15 @@ source "arch/avr32/mach-at32ap/Kconfig"
+ 
+ config LOAD_ADDRESS
+ 	hex
+-	default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
++	default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
+ 
+ config ENTRY_ADDRESS
+ 	hex
+-	default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
++	default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
+ 
+ config PHYS_OFFSET
+ 	hex
+-	default 0x10000000 if CPU_AT32AP7000=y
++	default 0x10000000 if CPU_AT32AP700X=y
+ 
+ source "kernel/Kconfig.preempt"
+ 
+@@ -163,6 +173,20 @@ config OWNERSHIP_TRACE
  	  enabling Nexus-compliant debuggers to keep track of the PID of the
  	  currently executing task.
  
++config NMI_DEBUGGING
++	bool "NMI Debugging"
++	default n
++	help
++	  Say Y here and pass the nmi_debug command-line parameter to
++	  the kernel to turn on NMI debugging. Depending on the value
++	  of the nmi_debug option, various pieces of information will
++	  be dumped to the console when a Non-Maskable Interrupt
++	  happens.
++
 +config DW_DMAC
 +	tristate "Synopsys DesignWare DMA Controller support"
 +	default y if CPU_AT32AP7000
@@ -151,14 +356,52 @@ index d12346a..ec6c7c5 100644
  # FPU emulation goes here
  
  source "kernel/Kconfig.hz"
+@@ -219,6 +243,8 @@ source "drivers/Kconfig"
+ 
+ source "fs/Kconfig"
+ 
++source "kernel/Kconfig.instrumentation"
++
+ source "arch/avr32/Kconfig.debug"
+ 
+ source "security/Kconfig"
+diff --git a/arch/avr32/Kconfig.debug b/arch/avr32/Kconfig.debug
+index 64ace00..2283933 100644
+--- a/arch/avr32/Kconfig.debug
++++ b/arch/avr32/Kconfig.debug
+@@ -6,14 +6,4 @@ config TRACE_IRQFLAGS_SUPPORT
+ 
+ source "lib/Kconfig.debug"
+ 
+-config KPROBES
+-	bool "Kprobes"
+-	depends on DEBUG_KERNEL
+-	help
+-	  Kprobes allows you to trap at almost any kernel address and
+-          execute a callback function.  register_kprobe() establishes
+-          a probepoint and specifies the callback.  Kprobes is useful
+-          for kernel debugging, non-intrusive instrumentation and testing.
+-          If in doubt, say "N".
+-
+ endmenu
 diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
-index dc6bc01..eb72198 100644
+index 8791864..2d7bacd 100644
 --- a/arch/avr32/Makefile
 +++ b/arch/avr32/Makefile
-@@ -31,6 +31,7 @@ core-$(CONFIG_BOARD_ATNGW100)		+= arch/avr32/boards/atngw100/
+@@ -16,7 +16,7 @@ KBUILD_AFLAGS	+= -mrelax -mno-pic
+ CFLAGS_MODULE	+= -mno-relax
+ LDFLAGS_vmlinux	+= --relax
+ 
+-cpuflags-$(CONFIG_CPU_AT32AP7000)	+= -mcpu=ap7000
++cpuflags-$(CONFIG_PLATFORM_AT32AP)	+= -march=ap
+ 
+ KBUILD_CFLAGS	+= $(cpuflags-y)
+ KBUILD_AFLAGS	+= $(cpuflags-y)
+@@ -31,6 +31,8 @@ core-$(CONFIG_BOARD_ATNGW100)		+= arch/avr32/boards/atngw100/
  core-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/
  core-y					+= arch/avr32/kernel/
  core-y					+= arch/avr32/mm/
++drivers-$(CONFIG_OPROFILE)		+= arch/avr32/oprofile/
 +drivers-y				+= arch/avr32/drivers/
  libs-y					+= arch/avr32/lib/
  
@@ -181,41 +424,19 @@ index 0000000..5d922df
 +
 +	  Choose 'Y' here if you're having i2c-related problems and
 +	  want to rule out the i2c bus driver.
-diff --git a/arch/avr32/boards/atngw100/flash.c b/arch/avr32/boards/atngw100/flash.c
-index f9b32a8..b07ae63 100644
---- a/arch/avr32/boards/atngw100/flash.c
-+++ b/arch/avr32/boards/atngw100/flash.c
-@@ -15,7 +15,7 @@
- 
- #include <asm/arch/smc.h>
- 
--static struct smc_config flash_config __initdata = {
-+static struct smc_timing flash_timing __initdata = {
- 	.ncs_read_setup		= 0,
- 	.nrd_setup		= 40,
- 	.ncs_write_setup	= 0,
-@@ -28,7 +28,9 @@ static struct smc_config flash_config __initdata = {
- 
- 	.read_cycle		= 120,
- 	.write_cycle		= 120,
-+};
- 
-+static struct smc_config flash_config __initdata = {
- 	.bus_width		= 2,
- 	.nrd_controlled		= 1,
- 	.nwe_controlled		= 1,
-@@ -82,6 +84,7 @@ static int __init atngw100_flash_init(void)
- {
- 	int ret;
- 
-+	smc_set_timing(&flash_config, &flash_timing);
- 	ret = smc_set_configuration(0, &flash_config);
- 	if (ret < 0) {
- 		printk(KERN_ERR "atngw100: failed to set NOR flash timing\n");
 diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
-index ef80156..2a5f587 100644
+index 52987c8..383b825 100644
 --- a/arch/avr32/boards/atngw100/setup.c
 +++ b/arch/avr32/boards/atngw100/setup.c
+@@ -20,7 +20,7 @@
+ #include <asm/io.h>
+ #include <asm/setup.h>
+ 
+-#include <asm/arch/at32ap7000.h>
++#include <asm/arch/at32ap700x.h>
+ #include <asm/arch/board.h>
+ #include <asm/arch/init.h>
+ #include <asm/arch/portmux.h>
 @@ -42,6 +42,11 @@ static struct spi_board_info spi0_board_info[] __initdata = {
  	},
  };
@@ -228,23 +449,15 @@ index ef80156..2a5f587 100644
  /*
   * The next two functions should go away as the boot loader is
   * supposed to initialize the macb address registers with a valid
-@@ -124,9 +129,13 @@ static struct platform_device ngw_gpio_leds = {
+@@ -124,6 +129,7 @@ static struct platform_device ngw_gpio_leds = {
  	}
  };
  
 +#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
  static struct i2c_gpio_platform_data i2c_gpio_data = {
--	.sda_pin	= GPIO_PIN_PA(6),
--	.scl_pin	= GPIO_PIN_PA(7),
-+	.sda_pin		= GPIO_PIN_PA(6),
-+	.scl_pin		= GPIO_PIN_PA(7),
-+	.sda_is_open_drain	= 1,
-+	.scl_is_open_drain	= 1,
-+	.udelay			= 2,	/* close to 100 kHz */
- };
- 
- static struct platform_device i2c_gpio_device = {
-@@ -136,6 +145,7 @@ static struct platform_device i2c_gpio_device = {
+ 	.sda_pin		= GPIO_PIN_PA(6),
+ 	.scl_pin		= GPIO_PIN_PA(7),
+@@ -139,6 +145,7 @@ static struct platform_device i2c_gpio_device = {
  		.platform_data	= &i2c_gpio_data,
  	},
  };
@@ -252,26 +465,23 @@ index ef80156..2a5f587 100644
  
  static int __init atngw100_init(void)
  {
-@@ -154,6 +164,8 @@ static int __init atngw100_init(void)
+@@ -157,6 +164,7 @@ static int __init atngw100_init(void)
  	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
  
  	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
 +	at32_add_device_mci(0, &mci0_data);
-+	at32_add_device_usba(0, NULL);
+ 	at32_add_device_usba(0, NULL);
  
  	for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
- 		at32_select_gpio(ngw_leds[i].gpio,
-@@ -161,9 +173,15 @@ static int __init atngw100_init(void)
+@@ -165,11 +173,15 @@ static int __init atngw100_init(void)
  	}
  	platform_device_register(&ngw_gpio_leds);
  
--	at32_select_gpio(i2c_gpio_data.sda_pin, 0);
--	at32_select_gpio(i2c_gpio_data.scl_pin, 0);
 +#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
-+	at32_select_gpio(i2c_gpio_data.sda_pin,
-+		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-+	at32_select_gpio(i2c_gpio_data.scl_pin,
-+		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+ 	at32_select_gpio(i2c_gpio_data.sda_pin,
+ 		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+ 	at32_select_gpio(i2c_gpio_data.scl_pin,
+ 		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
  	platform_device_register(&i2c_gpio_device);
 +#else
 +	at32_add_device_twi(0);
@@ -280,14 +490,131 @@ index ef80156..2a5f587 100644
  	return 0;
  }
 diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
-index 718578f..b1f5a62 100644
+index 718578f..56a8d8e 100644
 --- a/arch/avr32/boards/atstk1000/Kconfig
 +++ b/arch/avr32/boards/atstk1000/Kconfig
-@@ -76,4 +76,16 @@ config BOARD_ATSTK1002_J2_RGB
+@@ -1,34 +1,53 @@
+ # STK1000 customization
+ 
+-if BOARD_ATSTK1002
++if BOARD_ATSTK1000
+ 
+-config BOARD_ATSTK1002_CUSTOM
+-	bool "Non-default STK-1002 jumper settings"
++choice
++	prompt "ATSTK1000 CPU daughterboard type"
++	default BOARD_ATSTK1002
++
++config BOARD_ATSTK1002
++	bool "ATSTK1002"
++	select CPU_AT32AP7000
++
++config BOARD_ATSTK1003
++	bool "ATSTK1003"
++	select CPU_AT32AP7001
++
++config BOARD_ATSTK1004
++	bool "ATSTK1004"
++	select CPU_AT32AP7002
++
++endchoice
++
++
++config BOARD_ATSTK100X_CUSTOM
++	bool "Non-default STK1002/STK1003/STK1004 jumper settings"
+ 	help
+ 	  You will normally leave the jumpers on the CPU card at their
+ 	  default settings.  If you need to use certain peripherals,
+ 	  you will need to change some of those jumpers.
+ 
+-if BOARD_ATSTK1002_CUSTOM
++if BOARD_ATSTK100X_CUSTOM
+ 
+-config BOARD_ATSTK1002_SW1_CUSTOM
++config BOARD_ATSTK100X_SW1_CUSTOM
+ 	bool "SW1: use SSC1 (not SPI0)"
+ 	help
+ 	  This also prevents using the external DAC as an audio interface,
+ 	  and means you can't initialize the on-board QVGA display.
+ 
+-config BOARD_ATSTK1002_SW2_CUSTOM
++config BOARD_ATSTK100X_SW2_CUSTOM
+ 	bool "SW2: use IRDA or TIMER0 (not UART-A, MMC/SD, and PS2-A)"
+ 	help
+ 	  If you change this you'll want an updated boot loader putting
+ 	  the console on UART-C not UART-A.
+ 
+-config BOARD_ATSTK1002_SW3_CUSTOM
++config BOARD_ATSTK100X_SW3_CUSTOM
+ 	bool "SW3: use TIMER1 (not SSC0 and GCLK)"
+ 	help
+ 	  This also prevents using the external DAC as an audio interface.
+ 
+-config BOARD_ATSTK1002_SW4_CUSTOM
++config BOARD_ATSTK100X_SW4_CUSTOM
+ 	bool "SW4: use ISI/Camera (not GPIOs, SPI1, and PS2-B)"
+ 	help
+ 	  To use the camera interface you'll need a custom card (on the
+@@ -36,27 +55,29 @@ config BOARD_ATSTK1002_SW4_CUSTOM
+ 
+ config BOARD_ATSTK1002_SW5_CUSTOM
+ 	bool "SW5: use MACB1 (not LCDC)"
++	depends on BOARD_ATSTK1002
+ 
+ config BOARD_ATSTK1002_SW6_CUSTOM
+ 	bool "SW6: more GPIOs (not MACB0)"
++	depends on BOARD_ATSTK1002
+ 
+ endif	# custom
+ 
+-config BOARD_ATSTK1002_SPI1
++config BOARD_ATSTK100X_SPI1
+ 	bool "Configure SPI1 controller"
+-	depends on !BOARD_ATSTK1002_SW4_CUSTOM
++	depends on !BOARD_ATSTK100X_SW4_CUSTOM
+ 	help
+ 	  All the signals for the second SPI controller are available on
+ 	  GPIO lines and accessed through the J1 jumper block.  Say "y"
+ 	  here to configure that SPI controller.
+ 
+-config BOARD_ATSTK1002_J2_LED
++config BOARD_ATSTK1000_J2_LED
+ 	bool
+-	default BOARD_ATSTK1002_J2_LED8 || BOARD_ATSTK1002_J2_RGB
++	default BOARD_ATSTK1000_J2_LED8 || BOARD_ATSTK1000_J2_RGB
+ 
+ choice
+ 	prompt "LEDs connected to J2:"
+-	depends on LEDS_GPIO && !BOARD_ATSTK1002_SW4_CUSTOM
++	depends on LEDS_GPIO && !BOARD_ATSTK100X_SW4_CUSTOM
+ 	optional
+ 	help
+ 	  Select this if you have jumpered the J2 jumper block to the
+@@ -64,16 +85,64 @@ choice
+ 	  IDC cable.  A default "heartbeat" trigger is provided, but
+ 	  you can of course override this.
+ 
+-config BOARD_ATSTK1002_J2_LED8
++config BOARD_ATSTK1000_J2_LED8
+ 	bool "LED0..LED7"
+ 	help
+ 	  Select this if J2 is jumpered to LED0..LED7 amber leds.
+ 
+-config BOARD_ATSTK1002_J2_RGB
++config BOARD_ATSTK1000_J2_RGB
+ 	bool "RGB leds"
+ 	help
+ 	  Select this if J2 is jumpered to the RGB leds.
  
  endchoice
  
-+config BOARD_ATSTK1002_ENABLE_AC97
+-endif	# stk 1002
++config BOARD_ATSTK1000_EXTDAC
++	bool
++	depends on !BOARD_ATSTK100X_SW1_CUSTOM && !BOARD_ATSTK100X_SW3_CUSTOM
++	default y
++
++config BOARD_ATSTK100X_ENABLE_AC97
 +	bool "Use AC97C instead of ABDAC"
 +	help
 +	  Select this if you want to use the built-in AC97 controller
@@ -295,37 +622,332 @@ index 718578f..b1f5a62 100644
 +	  the same I/O pins on the AP7000, so both can't be enabled
 +	  at the same time.
 +
-+	  Note that the STK1000/STK1002 kit doesn't ship with an AC97
-+	  codec on board, so say N unless you've got an expansion
-+	  board with an AC97 codec on it that you want to use.
++	  Note that the STK1000 kit doesn't ship with an AC97 codec on
++	  board, so say N unless you've got an expansion board with an
++	  AC97 codec on it that you want to use.
 +
- endif	# stk 1002
++config BOARD_ATSTK1000_CF_HACKS
++	bool "ATSTK1000 CompactFlash hacks"
++	depends on !BOARD_ATSTK100X_SW4_CUSTOM
++	help
++	  Select this if you have re-routed the CompactFlash RESET and
++	  CD signals to GPIOs on your STK1000. This is necessary for
++	  reset and card detection to work properly, although some CF
++	  cards may be able to cope without reset.
++
++config BOARD_ATSTK1000_CF_RESET_PIN
++	hex "CompactFlash RESET pin"
++	default 0x30
++	depends on BOARD_ATSTK1000_CF_HACKS
++	help
++	  Select which GPIO pin to use for the CompactFlash RESET
++	  signal. This is specified as a hexadecimal number and should
++	  be defined as 0x20 * gpio_port + pin.
++
++	  The default is 0x30, which is pin 16 on PIOB, aka GPIO14.
++
++config BOARD_ATSTK1000_CF_DETECT_PIN
++	hex "CompactFlash DETECT pin"
++	default 0x3e
++	depends on BOARD_ATSTK1000_CF_HACKS
++	help
++	  Select which GPIO pin to use for the CompactFlash CD
++	  signal. This is specified as a hexadecimal number and should
++	  be defined as 0x20 * gpio_port + pin.
++
++	  The default is 0x3e, which is pin 30 on PIOB, aka GPIO15.
++
++endif	# stk 1000
+diff --git a/arch/avr32/boards/atstk1000/Makefile b/arch/avr32/boards/atstk1000/Makefile
+index 8e09922..beead86 100644
+--- a/arch/avr32/boards/atstk1000/Makefile
++++ b/arch/avr32/boards/atstk1000/Makefile
+@@ -1,2 +1,4 @@
+ obj-y				+= setup.o flash.o
+ obj-$(CONFIG_BOARD_ATSTK1002)	+= atstk1002.o
++obj-$(CONFIG_BOARD_ATSTK1003)	+= atstk1003.o
++obj-$(CONFIG_BOARD_ATSTK1004)	+= atstk1004.o
+diff --git a/arch/avr32/boards/atstk1000/atstk1000.h b/arch/avr32/boards/atstk1000/atstk1000.h
+index 9a49ed0..9392d32 100644
+--- a/arch/avr32/boards/atstk1000/atstk1000.h
++++ b/arch/avr32/boards/atstk1000/atstk1000.h
+@@ -12,4 +12,6 @@
+ 
+ extern struct atmel_lcdfb_info atstk1000_lcdc_data;
+ 
++void atstk1000_setup_j2_leds(void);
++
+ #endif /* __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H */
 diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
-index c9981b7..f7fb509 100644
+index 5be0d13..90436fa 100644
 --- a/arch/avr32/boards/atstk1000/atstk1002.c
 +++ b/arch/avr32/boards/atstk1000/atstk1002.c
-@@ -16,6 +16,7 @@
+@@ -11,7 +11,6 @@
+ #include <linux/etherdevice.h>
+ #include <linux/init.h>
+ #include <linux/kernel.h>
+-#include <linux/leds.h>
+ #include <linux/platform_device.h>
  #include <linux/string.h>
  #include <linux/types.h>
- #include <linux/spi/spi.h>
-+#include <linux/spi/at73c213.h>
+@@ -22,7 +21,7 @@
  
- #include <video/atmel_lcdc.h>
+ #include <asm/io.h>
+ #include <asm/setup.h>
+-#include <asm/arch/at32ap7000.h>
++#include <asm/arch/at32ap700x.h>
+ #include <asm/arch/board.h>
+ #include <asm/arch/init.h>
+ #include <asm/arch/portmux.h>
+@@ -49,18 +48,16 @@ static struct eth_platform_data __initdata eth_data[2] = {
+ 	},
+ };
+ 
+-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
+-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
+ static struct at73c213_board_info at73c213_data = {
+ 	.ssc_id		= 0,
+ 	.shortname	= "AVR32 STK1000 external DAC",
+ };
+ #endif
+-#endif
  
-@@ -49,7 +50,25 @@ static struct eth_platform_data __initdata eth_data[2] = {
+-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
+ static struct spi_board_info spi0_board_info[] __initdata = {
+-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
+ 	{
+ 		/* AT73C213 */
+ 		.modalias	= "at73c213",
+@@ -80,12 +77,25 @@ static struct spi_board_info spi0_board_info[] __initdata = {
  };
+ #endif
+ 
+-#ifdef CONFIG_BOARD_ATSTK1002_SPI1
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
+ static struct spi_board_info spi1_board_info[] __initdata = { {
+ 	/* patch in custom entries here */
+ } };
+ #endif
+ 
++static struct cf_platform_data __initdata cf0_data = {
++#ifdef CONFIG_BOARD_ATSTK1000_CF_HACKS
++	.detect_pin	= CONFIG_BOARD_ATSTK1000_CF_DETECT_PIN,
++	.reset_pin	= CONFIG_BOARD_ATSTK1000_CF_RESET_PIN,
++#else
++	.detect_pin	= GPIO_PIN_NONE,
++	.reset_pin	= GPIO_PIN_NONE,
++#endif
++	.vcc_pin	= GPIO_PIN_NONE,
++	.ready_pin	= GPIO_PIN_PB(27),
++	.cs		= 4,
++};
++
+ /*
+  * The next two functions should go away as the boot loader is
+  * supposed to initialize the macb address registers with a valid
+@@ -141,68 +151,8 @@ static void __init set_hw_addr(struct platform_device *pdev)
+ 	clk_put(pclk);
+ }
  
- #ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
-+#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
+-#ifdef CONFIG_BOARD_ATSTK1002_J2_LED
+-
+-static struct gpio_led stk_j2_led[] = {
+-#ifdef CONFIG_BOARD_ATSTK1002_J2_LED8
+-#define LEDSTRING "J2 jumpered to LED8"
+-	{ .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
+-	{ .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
+-	{ .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
+-	{ .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
+-	{ .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
+-	{ .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
+-	{ .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
+-	{ .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
+-			.default_trigger = "heartbeat", },
+-#else	/* RGB */
+-#define LEDSTRING "J2 jumpered to RGB LEDs"
+-	{ .name = "r1:red",     .gpio = GPIO_PIN_PB( 8), },
+-	{ .name = "g1:green",   .gpio = GPIO_PIN_PB(10), },
+-	{ .name = "b1:blue",    .gpio = GPIO_PIN_PB(14), },
+-
+-	{ .name = "r2:red",     .gpio = GPIO_PIN_PB( 9),
+-			.default_trigger = "heartbeat", },
+-	{ .name = "g2:green",   .gpio = GPIO_PIN_PB(13), },
+-	{ .name = "b2:blue",    .gpio = GPIO_PIN_PB(15),
+-			.default_trigger = "heartbeat", },
+-	/* PB16, PB30 unused */
+-#endif
+-};
+-
+-static struct gpio_led_platform_data stk_j2_led_data = {
+-	.num_leds	= ARRAY_SIZE(stk_j2_led),
+-	.leds		= stk_j2_led,
+-};
+-
+-static struct platform_device stk_j2_led_dev = {
+-	.name		= "leds-gpio",
+-	.id		= 2,	/* gpio block J2 */
+-	.dev		= {
+-		.platform_data	= &stk_j2_led_data,
+-	},
+-};
+-
+-static void setup_j2_leds(void)
+-{
+-	unsigned	i;
+-
+-	for (i = 0; i < ARRAY_SIZE(stk_j2_led); i++)
+-		at32_select_gpio(stk_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
+-
+-	printk("STK1002: " LEDSTRING "\n");
+-	platform_device_register(&stk_j2_led_dev);
+-}
+-
+-#else
+-static void setup_j2_leds(void)
+-{
+-}
+-#endif
+-
+-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
+-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
+-static void __init at73c213_set_clk(struct at73c213_board_info *info)
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static void __init atstk1002_setup_extdac(void)
+ {
+ 	struct clk *gclk;
+ 	struct clk *pll;
+@@ -220,7 +170,7 @@ static void __init at73c213_set_clk(struct at73c213_board_info *info)
+ 	}
+ 
+ 	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+-	info->dac_clk = gclk;
++	at73c213_data.dac_clk = gclk;
+ 
+ err_set_clk:
+ 	clk_put(pll);
+@@ -229,12 +179,16 @@ err_pll:
+ err_gclk:
+ 	return;
+ }
+-#endif
+-#endif
++#else
++static void __init atstk1002_setup_extdac(void)
++{
++
++}
++#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
+ 
+ void __init setup_board(void)
+ {
+-#ifdef	CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
++#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+ 	at32_map_usart(0, 1);	/* USART 0/B: /dev/ttyS1, IRDA */
+ #else
+ 	at32_map_usart(1, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
+@@ -271,7 +225,7 @@ static int __init atstk1002_init(void)
+ 
+ 	at32_add_system_devices();
+ 
+-#ifdef	CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
++#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+ 	at32_add_device_usart(1);
+ #else
+ 	at32_add_device_usart(0);
+@@ -281,12 +235,16 @@ static int __init atstk1002_init(void)
+ #ifndef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
+ 	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
+ #endif
+-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
+ 	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+ #endif
+-#ifdef CONFIG_BOARD_ATSTK1002_SPI1
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
+ 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
+ #endif
++	at32_add_device_twi(0);
++#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++	at32_add_device_mci(0, NULL);
++#endif
+ #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
+ 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
+ #else
+@@ -294,17 +252,18 @@ static int __init atstk1002_init(void)
+ 			     fbmem_start, fbmem_size);
+ #endif
+ 	at32_add_device_usba(0, NULL);
+-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
++	at32_add_device_ac97c(0);
++#else
++	at32_add_device_abdac(0);
++#endif
++#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
+ 	at32_add_device_ssc(0, ATMEL_SSC_TX);
+ #endif
++	at32_add_device_cf(0, 2, &cf0_data);
+ 
+-	setup_j2_leds();
+-
+-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
+-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
+-	at73c213_set_clk(&at73c213_data);
+-#endif
+-#endif
++	atstk1000_setup_j2_leds();
++	atstk1002_setup_extdac();
+ 
+ 	return 0;
+ }
+diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
+new file mode 100644
+index 0000000..768d204
+--- /dev/null
++++ b/arch/avr32/boards/atstk1000/atstk1003.c
+@@ -0,0 +1,181 @@
++/*
++ * ATSTK1003 daughterboard-specific init code
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/string.h>
++#include <linux/types.h>
++
++#include <linux/spi/at73c213.h>
++#include <linux/spi/spi.h>
++
++#include <asm/setup.h>
++
++#include <asm/arch/at32ap700x.h>
++#include <asm/arch/board.h>
++#include <asm/arch/init.h>
++#include <asm/arch/portmux.h>
++
++#include "atstk1000.h"
++
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
 +static struct at73c213_board_info at73c213_data = {
 +	.ssc_id		= 0,
 +	.shortname	= "AVR32 STK1000 external DAC",
 +};
 +#endif
-+#endif
-+#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
- static struct spi_board_info spi0_board_info[] __initdata = {
-+#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
++
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
++static struct spi_board_info spi0_board_info[] __initdata = {
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
 +	{
 +		/* AT73C213 */
 +		.modalias	= "at73c213",
@@ -335,28 +957,34 @@ index c9981b7..f7fb509 100644
 +		.platform_data	= &at73c213_data,
 +	},
 +#endif
- 	{
- 		/* QVGA display */
- 		.modalias	= "ltv350qv",
-@@ -66,6 +85,11 @@ static struct spi_board_info spi1_board_info[] __initdata = { {
- } };
- #endif
- 
-+static struct mci_platform_data __initdata mci0_data = {
++	/*
++	 * We can control the LTV350QV LCD panel, but it isn't much
++	 * point since we don't have an LCD controller...
++	 */
++};
++#endif
++
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
++static struct spi_board_info spi1_board_info[] __initdata = { {
++	/* patch in custom entries here */
++} };
++#endif
++
++static struct cf_platform_data __initdata cf0_data = {
++#ifdef CONFIG_BOARD_ATSTK1000_CF_HACKS
++	.detect_pin	= CONFIG_BOARD_ATSTK1000_CF_DETECT_PIN,
++	.reset_pin	= CONFIG_BOARD_ATSTK1000_CF_RESET_PIN,
++#else
 +	.detect_pin	= GPIO_PIN_NONE,
-+	.wp_pin		= GPIO_PIN_NONE,
++	.reset_pin	= GPIO_PIN_NONE,
++#endif
++	.vcc_pin	= GPIO_PIN_NONE,
++	.ready_pin	= GPIO_PIN_PB(27),
++	.cs		= 4,
 +};
 +
- /*
-  * The next two functions should go away as the boot loader is
-  * supposed to initialize the macb address registers with a valid
-@@ -180,6 +204,38 @@ static void setup_j2_leds(void)
- }
- #endif
- 
-+#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
-+#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
-+static void __init at73c213_set_clk(struct at73c213_board_info *info)
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static void __init atstk1003_setup_extdac(void)
 +{
 +	struct clk *gclk;
 +	struct clk *pll;
@@ -374,7 +1002,7 @@ index c9981b7..f7fb509 100644
 +	}
 +
 +	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
-+	info->dac_clk = gclk;
++	at73c213_data.dac_clk = gclk;
 +
 +err_set_clk:
 +	clk_put(pll);
@@ -383,160 +1011,516 @@ index c9981b7..f7fb509 100644
 +err_gclk:
 +	return;
 +}
++#else
++static void __init atstk1003_setup_extdac(void)
++{
++
++}
++#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
++
++void __init setup_board(void)
++{
++#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++	at32_map_usart(0, 1);	/* USART 0/B: /dev/ttyS1, IRDA */
++#else
++	at32_map_usart(1, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
 +#endif
++	/* USART 2/unused: expansion connector */
++	at32_map_usart(3, 2);	/* USART 3/C: /dev/ttyS2, DB9 */
++
++	at32_setup_serial_console(0);
++}
++
++static int __init atstk1003_init(void)
++{
++	/*
++	 * ATSTK1000 uses 32-bit SDRAM interface. Reserve the
++	 * SDRAM-specific pins so that nobody messes with them.
++	 */
++	at32_reserve_pin(GPIO_PIN_PE(0));	/* DATA[16]	*/
++	at32_reserve_pin(GPIO_PIN_PE(1));	/* DATA[17]	*/
++	at32_reserve_pin(GPIO_PIN_PE(2));	/* DATA[18]	*/
++	at32_reserve_pin(GPIO_PIN_PE(3));	/* DATA[19]	*/
++	at32_reserve_pin(GPIO_PIN_PE(4));	/* DATA[20]	*/
++	at32_reserve_pin(GPIO_PIN_PE(5));	/* DATA[21]	*/
++	at32_reserve_pin(GPIO_PIN_PE(6));	/* DATA[22]	*/
++	at32_reserve_pin(GPIO_PIN_PE(7));	/* DATA[23]	*/
++	at32_reserve_pin(GPIO_PIN_PE(8));	/* DATA[24]	*/
++	at32_reserve_pin(GPIO_PIN_PE(9));	/* DATA[25]	*/
++	at32_reserve_pin(GPIO_PIN_PE(10));	/* DATA[26]	*/
++	at32_reserve_pin(GPIO_PIN_PE(11));	/* DATA[27]	*/
++	at32_reserve_pin(GPIO_PIN_PE(12));	/* DATA[28]	*/
++	at32_reserve_pin(GPIO_PIN_PE(13));	/* DATA[29]	*/
++	at32_reserve_pin(GPIO_PIN_PE(14));	/* DATA[30]	*/
++	at32_reserve_pin(GPIO_PIN_PE(15));	/* DATA[31]	*/
++	at32_reserve_pin(GPIO_PIN_PE(26));	/* SDCS		*/
++
++	at32_add_system_devices();
++
++#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++	at32_add_device_usart(1);
++#else
++	at32_add_device_usart(0);
 +#endif
++	at32_add_device_usart(2);
 +
- void __init setup_board(void)
- {
- #ifdef	CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
-@@ -235,18 +291,34 @@ static int __init atstk1002_init(void)
- #ifdef CONFIG_BOARD_ATSTK1002_SPI1
- 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
- #endif
-+	at32_add_device_twi(0);
-+#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
-+	at32_add_device_mci(0, &mci0_data);
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
++	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++#endif
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
++	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
++#endif
++#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++	at32_add_device_mci(0, NULL);
 +#endif
- #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
- 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
- #else
- 	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
- 			     fbmem_start, fbmem_size);
- #endif
 +	at32_add_device_usba(0, NULL);
-+#ifdef CONFIG_BOARD_ATSTK1002_ENABLE_AC97
++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
 +	at32_add_device_ac97c(0);
 +#else
 +	at32_add_device_abdac(0);
 +#endif
- #ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
- 	at32_add_device_ssc(0, ATMEL_SSC_TX);
- #endif
- 
- 	setup_j2_leds();
- 
-+#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
-+#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
-+	at73c213_set_clk(&at73c213_data);
++#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
++	at32_add_device_ssc(0, ATMEL_SSC_TX);
 +#endif
++	at32_add_device_cf(0, 2, &cf0_data);
++
++	atstk1000_setup_j2_leds();
++	atstk1003_setup_extdac();
++
++	return 0;
++}
++postcore_initcall(atstk1003_init);
+diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
+new file mode 100644
+index 0000000..96015dd
+--- /dev/null
++++ b/arch/avr32/boards/atstk1000/atstk1004.c
+@@ -0,0 +1,152 @@
++/*
++ * ATSTK1003 daughterboard-specific init code
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/string.h>
++#include <linux/types.h>
++
++#include <linux/spi/at73c213.h>
++#include <linux/spi/spi.h>
++
++#include <video/atmel_lcdc.h>
++
++#include <asm/setup.h>
++
++#include <asm/arch/at32ap700x.h>
++#include <asm/arch/board.h>
++#include <asm/arch/init.h>
++#include <asm/arch/portmux.h>
++
++#include "atstk1000.h"
++
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static struct at73c213_board_info at73c213_data = {
++	.ssc_id		= 0,
++	.shortname	= "AVR32 STK1000 external DAC",
++};
 +#endif
 +
- 	return 0;
- }
- postcore_initcall(atstk1002_init);
-diff --git a/arch/avr32/boards/atstk1000/flash.c b/arch/avr32/boards/atstk1000/flash.c
-index aac4300..3d0a102 100644
---- a/arch/avr32/boards/atstk1000/flash.c
-+++ b/arch/avr32/boards/atstk1000/flash.c
-@@ -15,7 +15,7 @@
- 
- #include <asm/arch/smc.h>
- 
--static struct smc_config flash_config __initdata = {
-+static struct smc_timing flash_timing __initdata = {
- 	.ncs_read_setup		= 0,
- 	.nrd_setup		= 40,
- 	.ncs_write_setup	= 0,
-@@ -28,7 +28,9 @@ static struct smc_config flash_config __initdata = {
- 
- 	.read_cycle		= 120,
- 	.write_cycle		= 120,
-+};
- 
-+static struct smc_config flash_config __initdata = {
- 	.bus_width		= 2,
- 	.nrd_controlled		= 1,
- 	.nwe_controlled		= 1,
-@@ -82,6 +84,7 @@ static int __init atstk1000_flash_init(void)
- {
- 	int ret;
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
++static struct spi_board_info spi0_board_info[] __initdata = {
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++	{
++		/* AT73C213 */
++		.modalias	= "at73c213",
++		.max_speed_hz	= 200000,
++		.chip_select	= 0,
++		.mode		= SPI_MODE_1,
++		.platform_data	= &at73c213_data,
++	},
++#endif
++	{
++		/* QVGA display */
++		.modalias	= "ltv350qv",
++		.max_speed_hz	= 16000000,
++		.chip_select	= 1,
++		.mode		= SPI_MODE_3,
++	},
++};
++#endif
++
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
++static struct spi_board_info spi1_board_info[] __initdata = { {
++	/* patch in custom entries here */
++} };
++#endif
++
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static void __init atstk1004_setup_extdac(void)
++{
++	struct clk *gclk;
++	struct clk *pll;
++
++	gclk = clk_get(NULL, "gclk0");
++	if (IS_ERR(gclk))
++		goto err_gclk;
++	pll = clk_get(NULL, "pll0");
++	if (IS_ERR(pll))
++		goto err_pll;
++
++	if (clk_set_parent(gclk, pll)) {
++		pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
++		goto err_set_clk;
++	}
++
++	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
++	at73c213_data.dac_clk = gclk;
++
++err_set_clk:
++	clk_put(pll);
++err_pll:
++	clk_put(gclk);
++err_gclk:
++	return;
++}
++#else
++static void __init atstk1004_setup_extdac(void)
++{
++
++}
++#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
++
++void __init setup_board(void)
++{
++#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++	at32_map_usart(0, 1);	/* USART 0/B: /dev/ttyS1, IRDA */
++#else
++	at32_map_usart(1, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
++#endif
++	/* USART 2/unused: expansion connector */
++	at32_map_usart(3, 2);	/* USART 3/C: /dev/ttyS2, DB9 */
++
++	at32_setup_serial_console(0);
++}
++
++static int __init atstk1004_init(void)
++{
++	at32_add_system_devices();
++
++#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++	at32_add_device_usart(1);
++#else
++	at32_add_device_usart(0);
++#endif
++	at32_add_device_usart(2);
++
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
++	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++#endif
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
++	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
++#endif
++#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++	at32_add_device_mci(0, NULL);
++#endif
++	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
++			     fbmem_start, fbmem_size);
++	at32_add_device_usba(0, NULL);
++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
++	at32_add_device_ac97c(0);
++#else
++	at32_add_device_abdac(0);
++#endif
++#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
++	at32_add_device_ssc(0, ATMEL_SSC_TX);
++#endif
++
++	atstk1000_setup_j2_leds();
++	atstk1004_setup_extdac();
++
++	return 0;
++}
++postcore_initcall(atstk1004_init);
+diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c
+index c9af409..8bedf93 100644
+--- a/arch/avr32/boards/atstk1000/setup.c
++++ b/arch/avr32/boards/atstk1000/setup.c
+@@ -10,13 +10,17 @@
+ #include <linux/bootmem.h>
+ #include <linux/fb.h>
+ #include <linux/init.h>
++#include <linux/platform_device.h>
+ #include <linux/types.h>
+ #include <linux/linkage.h>
+ 
+ #include <video/atmel_lcdc.h>
+ 
+ #include <asm/setup.h>
++
++#include <asm/arch/at32ap700x.h>
+ #include <asm/arch/board.h>
++#include <asm/arch/portmux.h>
+ 
+ #include "atstk1000.h"
  
-+	smc_set_timing(&flash_config, &flash_timing);
- 	ret = smc_set_configuration(0, &flash_config);
- 	if (ret < 0) {
- 		printk(KERN_ERR "atstk1000: failed to set NOR flash timing\n");
+@@ -61,3 +65,63 @@ struct atmel_lcdfb_info __initdata atstk1000_lcdc_data = {
+ 	.default_monspecs	= &atstk1000_default_monspecs,
+ 	.guard_time		= 2,
+ };
++
++#ifdef CONFIG_BOARD_ATSTK1000_J2_LED
++#include <linux/leds.h>
++
++static struct gpio_led stk1000_j2_led[] = {
++#ifdef CONFIG_BOARD_ATSTK1000_J2_LED8
++#define LEDSTRING "J2 jumpered to LED8"
++	{ .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
++	{ .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
++	{ .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
++	{ .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
++	{ .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
++	{ .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
++	{ .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
++	{ .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
++			.default_trigger = "heartbeat", },
++#else	/* RGB */
++#define LEDSTRING "J2 jumpered to RGB LEDs"
++	{ .name = "r1:red",     .gpio = GPIO_PIN_PB( 8), },
++	{ .name = "g1:green",   .gpio = GPIO_PIN_PB(10), },
++	{ .name = "b1:blue",    .gpio = GPIO_PIN_PB(14), },
++
++	{ .name = "r2:red",     .gpio = GPIO_PIN_PB( 9),
++			.default_trigger = "heartbeat", },
++	{ .name = "g2:green",   .gpio = GPIO_PIN_PB(13), },
++	{ .name = "b2:blue",    .gpio = GPIO_PIN_PB(15),
++			.default_trigger = "heartbeat", },
++	/* PB16, PB30 unused */
++#endif
++};
++
++static struct gpio_led_platform_data stk1000_j2_led_data = {
++	.num_leds	= ARRAY_SIZE(stk1000_j2_led),
++	.leds		= stk1000_j2_led,
++};
++
++static struct platform_device stk1000_j2_led_dev = {
++	.name		= "leds-gpio",
++	.id		= 2,	/* gpio block J2 */
++	.dev		= {
++		.platform_data	= &stk1000_j2_led_data,
++	},
++};
++
++void __init atstk1000_setup_j2_leds(void)
++{
++	unsigned	i;
++
++	for (i = 0; i < ARRAY_SIZE(stk1000_j2_led); i++)
++		at32_select_gpio(stk1000_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
++
++	printk("STK1000: " LEDSTRING "\n");
++	platform_device_register(&stk1000_j2_led_dev);
++}
++#else /* CONFIG_BOARD_ATSTK1000_J2_LED */
++void __init atstk1000_setup_j2_leds(void)
++{
++
++}
++#endif /* CONFIG_BOARD_ATSTK1000_J2_LED */
 diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
-index b799a68..adce168 100644
+index b799a68..2ddc6f5 100644
 --- a/arch/avr32/configs/atngw100_defconfig
 +++ b/arch/avr32/configs/atngw100_defconfig
-@@ -1,7 +1,7 @@
+@@ -1,46 +1,51 @@
  #
  # Automatically generated make config: don't edit
 -# Linux kernel version: 2.6.22-rc5
 -# Sat Jun 23 15:40:05 2007
-+# Linux kernel version: 2.6.22.atmel.1
-+# Thu Jul 12 17:49:20 2007
++# Linux kernel version: 2.6.24
++# Tue Feb  5 16:37:27 2008
  #
  CONFIG_AVR32=y
  CONFIG_GENERIC_GPIO=y
-@@ -114,6 +114,7 @@ CONFIG_PLATFORM_AT32AP=y
+ CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ CONFIG_HARDIRQS_SW_RESEND=y
+ CONFIG_GENERIC_IRQ_PROBE=y
+ CONFIG_RWSEM_GENERIC_SPINLOCK=y
+ CONFIG_GENERIC_TIME=y
++# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+ # CONFIG_ARCH_HAS_ILOG2_U32 is not set
+ # CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_ARCH_SUPPORTS_OPROFILE=y
+ CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_CALIBRATE_DELAY=y
+ CONFIG_GENERIC_BUG=y
+ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+ 
+ #
+-# Code maturity level options
++# General setup
+ #
+ CONFIG_EXPERIMENTAL=y
+ CONFIG_BROKEN_ON_SMP=y
+ CONFIG_INIT_ENV_ARG_LIMIT=32
+-
+-#
+-# General setup
+-#
+ CONFIG_LOCALVERSION=""
+ # CONFIG_LOCALVERSION_AUTO is not set
+ CONFIG_SWAP=y
+ CONFIG_SYSVIPC=y
+-# CONFIG_IPC_NS is not set
+ CONFIG_SYSVIPC_SYSCTL=y
+ CONFIG_POSIX_MQUEUE=y
+ CONFIG_BSD_PROCESS_ACCT=y
+ CONFIG_BSD_PROCESS_ACCT_V3=y
+ # CONFIG_TASKSTATS is not set
+-# CONFIG_UTS_NS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
+ # CONFIG_AUDIT is not set
+ # CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_FAIR_GROUP_SCHED=y
++CONFIG_FAIR_USER_SCHED=y
++# CONFIG_FAIR_CGROUP_SCHED is not set
+ CONFIG_SYSFS_DEPRECATED=y
+ # CONFIG_RELAY is not set
+ CONFIG_BLK_DEV_INITRD=y
+@@ -61,35 +66,28 @@ CONFIG_FUTEX=y
+ CONFIG_ANON_INODES=y
+ CONFIG_EPOLL=y
+ CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+ CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+ CONFIG_VM_EVENT_COUNTERS=y
+-# CONFIG_SLUB_DEBUG is not set
++CONFIG_SLUB_DEBUG=y
+ # CONFIG_SLAB is not set
+ CONFIG_SLUB=y
+ # CONFIG_SLOB is not set
++CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
+ # CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=1
+-
+-#
+-# Loadable module support
+-#
+ CONFIG_MODULES=y
+ CONFIG_MODULE_UNLOAD=y
+ CONFIG_MODULE_FORCE_UNLOAD=y
+ # CONFIG_MODVERSIONS is not set
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
+ CONFIG_KMOD=y
+-
+-#
+-# Block layer
+-#
+ CONFIG_BLOCK=y
+ # CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
+ # CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
+ 
+ #
+ # IO Schedulers
+@@ -111,17 +109,20 @@ CONFIG_SUBARCH_AVR32B=y
+ CONFIG_MMU=y
+ CONFIG_PERFORMANCE_COUNTERS=y
+ CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP700X=y
  CONFIG_CPU_AT32AP7000=y
  # CONFIG_BOARD_ATSTK1000 is not set
  CONFIG_BOARD_ATNGW100=y
-+# CONFIG_BOARD_ATNGW100_I2C_GPIO is not set
++CONFIG_BOARD_ATNGW100_I2C_GPIO=y
  CONFIG_LOADER_U_BOOT=y
  
  #
-@@ -122,6 +123,7 @@ CONFIG_LOADER_U_BOOT=y
- # CONFIG_AP7000_32_BIT_SMC is not set
- CONFIG_AP7000_16_BIT_SMC=y
- # CONFIG_AP7000_8_BIT_SMC is not set
+ # Atmel AVR32 AP options
+ #
+-# CONFIG_AP7000_32_BIT_SMC is not set
+-CONFIG_AP7000_16_BIT_SMC=y
+-# CONFIG_AP7000_8_BIT_SMC is not set
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
 +CONFIG_GPIO_DEV=y
  CONFIG_LOAD_ADDRESS=0x10000000
  CONFIG_ENTRY_ADDRESS=0x90000000
  CONFIG_PHYS_OFFSET=0x10000000
-@@ -145,6 +147,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
+@@ -141,10 +142,14 @@ CONFIG_FLATMEM_MANUAL=y
+ CONFIG_FLATMEM=y
+ CONFIG_FLAT_NODE_MEM_MAP=y
+ # CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+ CONFIG_SPLIT_PTLOCK_CPUS=4
  # CONFIG_RESOURCES_64BIT is not set
  CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
  # CONFIG_OWNERSHIP_TRACE is not set
++# CONFIG_NMI_DEBUGGING is not set
 +CONFIG_DW_DMAC=y
  # CONFIG_HZ_100 is not set
  CONFIG_HZ_250=y
  # CONFIG_HZ_300 is not set
-@@ -153,6 +156,27 @@ CONFIG_HZ=250
+@@ -153,13 +158,31 @@ CONFIG_HZ=250
  CONFIG_CMDLINE=""
  
  #
-+# Power managment options
-+#
-+
-+#
+-# Bus options
++# Power management options
+ #
+-# CONFIG_ARCH_SUPPORTS_MSI is not set
+ 
+ #
+-# PCCARD (PCMCIA/CardBus) support
 +# CPU Frequency scaling
-+#
+ #
 +CONFIG_CPU_FREQ=y
 +CONFIG_CPU_FREQ_TABLE=y
 +# CONFIG_CPU_FREQ_DEBUG is not set
-+CONFIG_CPU_FREQ_STAT=m
-+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
++# CONFIG_CPU_FREQ_STAT is not set
 +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
 +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 +CONFIG_CPU_FREQ_GOV_USERSPACE=y
 +CONFIG_CPU_FREQ_GOV_ONDEMAND=y
 +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 +CONFIG_CPU_FREQ_AT32AP=y
 +
 +#
- # Bus options
++# Bus options
++#
++# CONFIG_ARCH_SUPPORTS_MSI is not set
+ # CONFIG_PCCARD is not set
+ 
  #
- # CONFIG_ARCH_SUPPORTS_MSI is not set
-@@ -187,13 +211,8 @@ CONFIG_NET_KEY=y
- # CONFIG_NET_KEY_MIGRATE is not set
- CONFIG_INET=y
- CONFIG_IP_MULTICAST=y
--CONFIG_IP_ADVANCED_ROUTER=y
--CONFIG_ASK_IP_FIB_HASH=y
--# CONFIG_IP_FIB_TRIE is not set
-+# CONFIG_IP_ADVANCED_ROUTER is not set
- CONFIG_IP_FIB_HASH=y
--# CONFIG_IP_MULTIPLE_TABLES is not set
--# CONFIG_IP_ROUTE_MULTIPATH is not set
--# CONFIG_IP_ROUTE_VERBOSE is not set
- CONFIG_IP_PNP=y
- CONFIG_IP_PNP_DHCP=y
- # CONFIG_IP_PNP_BOOTP is not set
-@@ -240,6 +259,7 @@ CONFIG_IPV6_SIT=y
+@@ -213,6 +236,7 @@ CONFIG_INET_TUNNEL=y
+ CONFIG_INET_XFRM_MODE_TRANSPORT=y
+ CONFIG_INET_XFRM_MODE_TUNNEL=y
+ CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
+ CONFIG_INET_DIAG=y
+ CONFIG_INET_TCP_DIAG=y
+ # CONFIG_TCP_CONG_ADVANCED is not set
+@@ -240,6 +264,7 @@ CONFIG_IPV6_SIT=y
  # CONFIG_NETWORK_SECMARK is not set
  CONFIG_NETFILTER=y
  # CONFIG_NETFILTER_DEBUG is not set
@@ -544,7 +1528,27 @@ index b799a68..adce168 100644
  
  #
  # Core Netfilter Configuration
-@@ -284,6 +304,7 @@ CONFIG_NETFILTER_XT_MATCH_MAC=m
+@@ -252,6 +277,7 @@ CONFIG_NF_CONNTRACK_MARK=y
+ # CONFIG_NF_CONNTRACK_EVENTS is not set
+ CONFIG_NF_CT_PROTO_GRE=m
+ # CONFIG_NF_CT_PROTO_SCTP is not set
++# CONFIG_NF_CT_PROTO_UDPLITE is not set
+ CONFIG_NF_CONNTRACK_AMANDA=m
+ CONFIG_NF_CONNTRACK_FTP=m
+ CONFIG_NF_CONNTRACK_H323=m
+@@ -269,9 +295,11 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
+ CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+ CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+ # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
++# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+ CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+ CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+ CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
++# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+ CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+ # CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+@@ -284,6 +312,7 @@ CONFIG_NETFILTER_XT_MATCH_MAC=m
  CONFIG_NETFILTER_XT_MATCH_MARK=m
  CONFIG_NETFILTER_XT_MATCH_POLICY=m
  CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
@@ -552,7 +1556,16 @@ index b799a68..adce168 100644
  CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
  CONFIG_NETFILTER_XT_MATCH_QUOTA=m
  CONFIG_NETFILTER_XT_MATCH_REALM=m
-@@ -359,13 +380,19 @@ CONFIG_IP6_NF_TARGET_REJECT=m
+@@ -292,6 +321,8 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m
+ CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+ CONFIG_NETFILTER_XT_MATCH_STRING=m
+ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
++# CONFIG_NETFILTER_XT_MATCH_TIME is not set
++# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+ CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+ 
+ #
+@@ -359,13 +390,19 @@ CONFIG_IP6_NF_TARGET_REJECT=m
  CONFIG_IP6_NF_MANGLE=m
  CONFIG_IP6_NF_TARGET_HL=m
  CONFIG_IP6_NF_RAW=m
@@ -573,19 +1586,123 @@ index b799a68..adce168 100644
  # CONFIG_LLC2 is not set
  # CONFIG_IPX is not set
  # CONFIG_ATALK is not set
-@@ -521,7 +548,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+@@ -373,10 +410,6 @@ CONFIG_VLAN_8021Q=m
+ # CONFIG_LAPB is not set
+ # CONFIG_ECONET is not set
+ # CONFIG_WAN_ROUTER is not set
+-
+-#
+-# QoS and/or fair queueing
+-#
+ # CONFIG_NET_SCHED is not set
+ CONFIG_NET_CLS_ROUTE=y
+ 
+@@ -384,6 +417,7 @@ CONFIG_NET_CLS_ROUTE=y
+ # Network testing
  #
- # Misc devices
+ # CONFIG_NET_PKTGEN is not set
++# CONFIG_NET_TCPPROBE is not set
+ # CONFIG_HAMRADIO is not set
+ # CONFIG_IRDA is not set
+ # CONFIG_BT is not set
+@@ -397,6 +431,7 @@ CONFIG_NET_CLS_ROUTE=y
+ # CONFIG_MAC80211 is not set
+ # CONFIG_IEEE80211 is not set
+ # CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
+ 
  #
+ # Device Drivers
+@@ -405,16 +440,13 @@ CONFIG_NET_CLS_ROUTE=y
+ #
+ # Generic Driver Options
+ #
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+ CONFIG_STANDALONE=y
+ # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+ # CONFIG_FW_LOADER is not set
+ # CONFIG_DEBUG_DRIVER is not set
+ # CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+-
+-#
+-# Connector - unified userspace <-> kernelspace linker
+-#
+ # CONFIG_CONNECTOR is not set
+ CONFIG_MTD=y
+ # CONFIG_MTD_DEBUG is not set
+@@ -434,6 +466,7 @@ CONFIG_MTD_BLOCK=y
+ # CONFIG_INFTL is not set
+ # CONFIG_RFD_FTL is not set
+ # CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
+ 
+ #
+ # RAM/ROM/Flash chip drivers
+@@ -493,20 +526,8 @@ CONFIG_MTD_DATAFLASH=y
+ # UBI - Unsorted block images
+ #
+ # CONFIG_MTD_UBI is not set
+-
+-#
+-# Parallel port support
+-#
+ # CONFIG_PARPORT is not set
+-
+-#
+-# Plug and Play support
+-#
+-# CONFIG_PNPACPI is not set
+-
+-#
+-# Block devices
+-#
++CONFIG_BLK_DEV=y
+ # CONFIG_BLK_DEV_COW_COMMON is not set
+ CONFIG_BLK_DEV_LOOP=m
+ # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+@@ -517,11 +538,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
+ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
+-
+-#
+-# Misc devices
+-#
 -# CONFIG_BLINK is not set
++# CONFIG_MISC_DEVICES is not set
  # CONFIG_IDE is not set
  
  #
-@@ -545,13 +571,26 @@ CONFIG_NETDEVICES=y
+@@ -529,30 +546,42 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ #
+ # CONFIG_RAID_ATTRS is not set
+ # CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
+ # CONFIG_SCSI_NETLINK is not set
+ # CONFIG_ATA is not set
+-
+-#
+-# Multi-device support (RAID and LVM)
+-#
+ # CONFIG_MD is not set
+-
+-#
+-# Network device support
+-#
+ CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
+ # CONFIG_DUMMY is not set
  # CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
  # CONFIG_EQUALIZER is not set
  CONFIG_TUN=m
 -# CONFIG_PHYLIB is not set
+-
+-#
+-# Ethernet (10 or 100Mbit)
+-#
++# CONFIG_VETH is not set
 +CONFIG_PHYLIB=y
 +
 +#
@@ -599,46 +1716,76 @@ index b799a68..adce168 100644
 +# CONFIG_VITESSE_PHY is not set
 +# CONFIG_SMSC_PHY is not set
 +# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
 +# CONFIG_FIXED_PHY is not set
- 
- #
- # Ethernet (10 or 100Mbit)
- #
++# CONFIG_MDIO_BITBANG is not set
  CONFIG_NET_ETHERNET=y
 -CONFIG_MII=y
 +# CONFIG_MII is not set
  CONFIG_MACB=y
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
  # CONFIG_NETDEV_1000 is not set
  # CONFIG_NETDEV_10000 is not set
-@@ -625,7 +664,15 @@ CONFIG_UNIX98_PTYS=y
- # IPMI
+ 
+@@ -571,21 +600,14 @@ CONFIG_PPP_DEFLATE=m
+ CONFIG_PPP_BSDCOMP=m
+ CONFIG_PPP_MPPE=m
+ CONFIG_PPPOE=m
++# CONFIG_PPPOL2TP is not set
+ # CONFIG_SLIP is not set
+ CONFIG_SLHC=m
+ # CONFIG_SHAPER is not set
+ # CONFIG_NETCONSOLE is not set
+ # CONFIG_NETPOLL is not set
+ # CONFIG_NET_POLL_CONTROLLER is not set
+-
+-#
+-# ISDN subsystem
+-#
+ # CONFIG_ISDN is not set
+-
+-#
+-# Telephony Support
+-#
+ # CONFIG_PHONE is not set
+ 
+ #
+@@ -615,28 +637,57 @@ CONFIG_SLHC=m
  #
+ CONFIG_SERIAL_ATMEL=y
+ CONFIG_SERIAL_ATMEL_CONSOLE=y
++CONFIG_SERIAL_ATMEL_PDC=y
+ # CONFIG_SERIAL_ATMEL_TTYAT is not set
+ CONFIG_SERIAL_CORE=y
+ CONFIG_SERIAL_CORE_CONSOLE=y
+ CONFIG_UNIX98_PTYS=y
+ # CONFIG_LEGACY_PTYS is not set
+-
+-#
+-# IPMI
+-#
  # CONFIG_IPMI_HANDLER is not set
 -# CONFIG_WATCHDOG is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT32AP700X_WDT=y
-+CONFIG_AT32AP700X_WDT_TIMEOUT=2
  # CONFIG_HW_RANDOM is not set
  # CONFIG_RTC is not set
  # CONFIG_GEN_RTC is not set
-@@ -636,7 +683,42 @@ CONFIG_UNIX98_PTYS=y
- # TPM devices
- #
- # CONFIG_TCG_TPM is not set
--# CONFIG_I2C is not set
+ # CONFIG_R3964 is not set
+ # CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
 +CONFIG_I2C=m
 +CONFIG_I2C_BOARDINFO=y
 +CONFIG_I2C_CHARDEV=m
-+
-+#
+ 
+ #
+-# TPM devices
 +# I2C Algorithms
-+#
+ #
+-# CONFIG_TCG_TPM is not set
+-# CONFIG_I2C is not set
 +CONFIG_I2C_ALGOBIT=m
 +# CONFIG_I2C_ALGOPCF is not set
 +# CONFIG_I2C_ALGOPCA is not set
@@ -647,11 +1794,11 @@ index b799a68..adce168 100644
 +# I2C Hardware Bus support
 +#
 +CONFIG_I2C_ATMELTWI=m
-+CONFIG_I2C_ATMELTWI_BAUDRATE=100000
 +CONFIG_I2C_GPIO=m
 +# CONFIG_I2C_OCORES is not set
 +# CONFIG_I2C_PARPORT_LIGHT is not set
 +# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
 +# CONFIG_I2C_STUB is not set
 +
 +#
@@ -659,11 +1806,13 @@ index b799a68..adce168 100644
 +#
 +# CONFIG_SENSORS_DS1337 is not set
 +# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_DS1682 is not set
 +# CONFIG_SENSORS_EEPROM is not set
 +# CONFIG_SENSORS_PCF8574 is not set
 +# CONFIG_SENSORS_PCA9539 is not set
 +# CONFIG_SENSORS_PCF8591 is not set
 +# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
 +# CONFIG_I2C_DEBUG_CORE is not set
 +# CONFIG_I2C_DEBUG_ALGO is not set
 +# CONFIG_I2C_DEBUG_BUS is not set
@@ -671,32 +1820,89 @@ index b799a68..adce168 100644
  
  #
  # SPI support
-@@ -655,7 +737,7 @@ CONFIG_SPI_ATMEL=y
+@@ -655,13 +706,25 @@ CONFIG_SPI_ATMEL=y
  # SPI Protocol Masters
  #
  # CONFIG_SPI_AT25 is not set
 -# CONFIG_SPI_SPIDEV is not set
 +CONFIG_SPI_SPIDEV=m
++# CONFIG_SPI_TLE62X0 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
+ 
+ #
+-# Dallas's 1-wire bus
++# Watchdog Device Drivers
+ #
+-# CONFIG_W1 is not set
+-# CONFIG_HWMON is not set
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
+ 
+ #
+ # Multifunction device drivers
+@@ -678,23 +741,21 @@ CONFIG_SPI_ATMEL=y
+ #
+ # Graphics support
+ #
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++# CONFIG_FB is not set
+ # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
  
  #
- # Dallas's 1-wire bus
-@@ -706,8 +788,41 @@ CONFIG_SPI_ATMEL=y
+ # Display device support
+ #
+ # CONFIG_DISPLAY_SUPPORT is not set
+-# CONFIG_VGASTATE is not set
+-# CONFIG_FB is not set
+ 
+ #
+ # Sound
+ #
+ # CONFIG_SOUND is not set
+-
+-#
+-# USB support
+-#
++CONFIG_USB_SUPPORT=y
+ # CONFIG_USB_ARCH_HAS_HCD is not set
+ # CONFIG_USB_ARCH_HAS_OHCI is not set
+ # CONFIG_USB_ARCH_HAS_EHCI is not set
+@@ -706,12 +767,48 @@ CONFIG_SPI_ATMEL=y
  #
  # USB Gadget Support
  #
 -# CONFIG_USB_GADGET is not set
 -# CONFIG_MMC is not set
+-
+-#
+-# LED devices
+-#
 +CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
 +# CONFIG_USB_GADGET_DEBUG_FILES is not set
 +CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
 +# CONFIG_USB_GADGET_FSL_USB2 is not set
 +# CONFIG_USB_GADGET_NET2280 is not set
 +# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
 +# CONFIG_USB_GADGET_GOKU is not set
 +# CONFIG_USB_GADGET_LH7A40X is not set
-+CONFIG_USB_GADGET_ATMEL_USBA=y
-+CONFIG_USB_ATMEL_USBA=y
 +# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
 +# CONFIG_USB_GADGET_AT91 is not set
 +# CONFIG_USB_GADGET_DUMMY_HCD is not set
 +CONFIG_USB_GADGET_DUALSPEED=y
@@ -716,31 +1922,26 @@ index b799a68..adce168 100644
 +# MMC/SD Card Drivers
 +#
 +CONFIG_MMC_BLOCK=y
++# CONFIG_MMC_BLOCK_BOUNCE is not set
++# CONFIG_SDIO_UART is not set
 +
 +#
 +# MMC/SD Host Controller Drivers
 +#
 +CONFIG_MMC_ATMELMCI=y
++CONFIG_MMC_SPI=m
+ CONFIG_NEW_LEDS=y
+ CONFIG_LEDS_CLASS=y
  
- #
- # LED devices
-@@ -727,27 +842,62 @@ CONFIG_LEDS_TRIGGERS=y
+@@ -726,53 +823,71 @@ CONFIG_LEDS_GPIO=y
+ CONFIG_LEDS_TRIGGERS=y
  CONFIG_LEDS_TRIGGER_TIMER=y
  CONFIG_LEDS_TRIGGER_HEARTBEAT=y
- 
-+#
-+# InfiniBand support
-+#
- 
- #
+-
+-
+-#
 -# LED drivers
-+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
- #
- 
- #
--# LED Triggers
-+# Real Time Clock
- #
+-#
 +CONFIG_RTC_LIB=y
 +CONFIG_RTC_CLASS=y
 +CONFIG_RTC_HCTOSYS=y
@@ -748,6 +1949,10 @@ index b799a68..adce168 100644
 +# CONFIG_RTC_DEBUG is not set
  
  #
+-# LED Triggers
+-#
+-
+-#
 -# InfiniBand support
 +# RTC interfaces
  #
@@ -762,6 +1967,7 @@ index b799a68..adce168 100644
 +# I2C RTC drivers
  #
 +# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
 +# CONFIG_RTC_DRV_DS1672 is not set
 +# CONFIG_RTC_DRV_MAX6900 is not set
 +# CONFIG_RTC_DRV_RS5C372 is not set
@@ -769,31 +1975,58 @@ index b799a68..adce168 100644
 +# CONFIG_RTC_DRV_X1205 is not set
 +# CONFIG_RTC_DRV_PCF8563 is not set
 +# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
  
  #
 -# Real Time Clock
 +# SPI RTC drivers
-+#
+ #
+-# CONFIG_RTC_CLASS is not set
 +# CONFIG_RTC_DRV_RS5C348 is not set
 +# CONFIG_RTC_DRV_MAX6902 is not set
-+
-+#
+ 
+ #
+-# DMA Engine support
 +# Platform RTC drivers
-+#
+ #
+-# CONFIG_DMA_ENGINE is not set
 +# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
 +# CONFIG_RTC_DRV_DS1742 is not set
 +# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
 +# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
+ 
+ #
+-# DMA Clients
 +# on-CPU RTC drivers
  #
--# CONFIG_RTC_CLASS is not set
 +CONFIG_RTC_DRV_AT32AP700X=y
  
  #
- # DMA Engine support
-@@ -781,7 +931,8 @@ CONFIG_JBD=y
+-# DMA Devices
++# Userspace I/O
+ #
++# CONFIG_UIO is not set
+ 
+ #
+ # File systems
+ #
+-CONFIG_EXT2_FS=y
++CONFIG_EXT2_FS=m
+ # CONFIG_EXT2_FS_XATTR is not set
+ # CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS=m
+ # CONFIG_EXT3_FS_XATTR is not set
+ # CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=y
+-# CONFIG_JBD_DEBUG is not set
++CONFIG_JBD=m
+ # CONFIG_REISERFS_FS is not set
+ # CONFIG_JFS_FS is not set
+ # CONFIG_FS_POSIX_ACL is not set
+@@ -781,7 +896,8 @@ CONFIG_JBD=y
  # CONFIG_OCFS2_FS is not set
  # CONFIG_MINIX_FS is not set
  # CONFIG_ROMFS_FS is not set
@@ -803,43 +2036,307 @@ index b799a68..adce168 100644
  # CONFIG_QUOTA is not set
  # CONFIG_DNOTIFY is not set
  # CONFIG_AUTOFS_FS is not set
-@@ -936,7 +1087,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+@@ -814,7 +930,6 @@ CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+-CONFIG_RAMFS=y
+ CONFIG_CONFIGFS_FS=y
+ 
+ #
+@@ -830,10 +945,12 @@ CONFIG_CONFIGFS_FS=y
+ CONFIG_JFFS2_FS=y
+ CONFIG_JFFS2_FS_DEBUG=0
+ CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+ # CONFIG_JFFS2_SUMMARY is not set
+ # CONFIG_JFFS2_FS_XATTR is not set
+ # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+ CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
+ CONFIG_JFFS2_RTIME=y
+ # CONFIG_JFFS2_RUBIN is not set
+ # CONFIG_CRAMFS is not set
+@@ -842,19 +959,21 @@ CONFIG_JFFS2_RTIME=y
+ # CONFIG_QNX4FS_FS is not set
+ # CONFIG_SYSV_FS is not set
+ # CONFIG_UFS_FS is not set
+-
+-#
+-# Network File Systems
+-#
++CONFIG_NETWORK_FILESYSTEMS=y
+ CONFIG_NFS_FS=y
+ CONFIG_NFS_V3=y
+ # CONFIG_NFS_V3_ACL is not set
+ # CONFIG_NFS_V4 is not set
+ # CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
++CONFIG_NFSD=m
++CONFIG_NFSD_V3=y
++# CONFIG_NFSD_V3_ACL is not set
++# CONFIG_NFSD_V4 is not set
++CONFIG_NFSD_TCP=y
+ CONFIG_ROOT_NFS=y
+ CONFIG_LOCKD=y
+ CONFIG_LOCKD_V4=y
++CONFIG_EXPORTFS=m
+ CONFIG_NFS_COMMON=y
+ CONFIG_SUNRPC=y
+ # CONFIG_SUNRPC_BIND34 is not set
+@@ -871,23 +990,18 @@ CONFIG_CIFS=m
+ # CONFIG_NCP_FS is not set
+ # CONFIG_CODA_FS is not set
+ # CONFIG_AFS_FS is not set
+-# CONFIG_9P_FS is not set
+ 
+ #
+ # Partition Types
+ #
+ # CONFIG_PARTITION_ADVANCED is not set
+ CONFIG_MSDOS_PARTITION=y
+-
+-#
+-# Native Language Support
+-#
+-CONFIG_NLS=y
++CONFIG_NLS=m
+ CONFIG_NLS_DEFAULT="iso8859-1"
+-# CONFIG_NLS_CODEPAGE_437 is not set
++CONFIG_NLS_CODEPAGE_437=m
+ # CONFIG_NLS_CODEPAGE_737 is not set
+ # CONFIG_NLS_CODEPAGE_775 is not set
+-CONFIG_NLS_CODEPAGE_850=y
++CONFIG_NLS_CODEPAGE_850=m
+ # CONFIG_NLS_CODEPAGE_852 is not set
+ # CONFIG_NLS_CODEPAGE_855 is not set
+ # CONFIG_NLS_CODEPAGE_857 is not set
+@@ -908,7 +1022,7 @@ CONFIG_NLS_CODEPAGE_850=y
+ # CONFIG_NLS_CODEPAGE_1250 is not set
+ # CONFIG_NLS_CODEPAGE_1251 is not set
+ # CONFIG_NLS_ASCII is not set
+-CONFIG_NLS_ISO8859_1=y
++CONFIG_NLS_ISO8859_1=m
+ # CONFIG_NLS_ISO8859_2 is not set
+ # CONFIG_NLS_ISO8859_3 is not set
+ # CONFIG_NLS_ISO8859_4 is not set
+@@ -921,18 +1035,19 @@ CONFIG_NLS_ISO8859_1=y
+ # CONFIG_NLS_ISO8859_15 is not set
+ # CONFIG_NLS_KOI8_R is not set
+ # CONFIG_NLS_KOI8_U is not set
+-CONFIG_NLS_UTF8=y
+-
+-#
+-# Distributed Lock Manager
+-#
++CONFIG_NLS_UTF8=m
+ # CONFIG_DLM is not set
++CONFIG_INSTRUMENTATION=y
++CONFIG_PROFILING=y
++CONFIG_OPROFILE=m
++CONFIG_KPROBES=y
++# CONFIG_MARKERS is not set
+ 
+ #
+ # Kernel hacking
+ #
+-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ # CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
  CONFIG_ENABLE_MUST_CHECK=y
  CONFIG_MAGIC_SYSRQ=y
  # CONFIG_UNUSED_SYMBOLS is not set
--# CONFIG_DEBUG_FS is not set
-+CONFIG_DEBUG_FS=y
- # CONFIG_HEADERS_CHECK is not set
+@@ -941,12 +1056,17 @@ CONFIG_MAGIC_SYSRQ=y
  CONFIG_DEBUG_KERNEL=y
  # CONFIG_DEBUG_SHIRQ is not set
+ CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
+ # CONFIG_SCHEDSTATS is not set
+ # CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+ # CONFIG_RT_MUTEX_TESTER is not set
+ # CONFIG_DEBUG_SPINLOCK is not set
+ # CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
+ # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+ # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+ # CONFIG_DEBUG_KOBJECT is not set
+@@ -954,21 +1074,21 @@ CONFIG_DEBUG_BUGVERBOSE=y
+ # CONFIG_DEBUG_INFO is not set
+ # CONFIG_DEBUG_VM is not set
+ # CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
+ CONFIG_FRAME_POINTER=y
+ # CONFIG_FORCED_INLINING is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_LKDTM is not set
+ # CONFIG_FAULT_INJECTION is not set
+-# CONFIG_KPROBES is not set
++# CONFIG_SAMPLES is not set
+ 
+ #
+ # Security options
+ #
+ # CONFIG_KEYS is not set
+ # CONFIG_SECURITY is not set
+-
+-#
+-# Cryptographic options
+-#
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+ CONFIG_CRYPTO=y
+ CONFIG_CRYPTO_ALGAPI=y
+ CONFIG_CRYPTO_BLKCIPHER=y
+@@ -989,6 +1109,7 @@ CONFIG_CRYPTO_ECB=m
+ CONFIG_CRYPTO_CBC=y
+ CONFIG_CRYPTO_PCBC=m
+ # CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
+ # CONFIG_CRYPTO_CRYPTD is not set
+ CONFIG_CRYPTO_DES=y
+ # CONFIG_CRYPTO_FCRYPT is not set
+@@ -1002,15 +1123,14 @@ CONFIG_CRYPTO_DES=y
+ CONFIG_CRYPTO_ARC4=m
+ # CONFIG_CRYPTO_KHAZAD is not set
+ # CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
+ CONFIG_CRYPTO_DEFLATE=y
+ # CONFIG_CRYPTO_MICHAEL_MIC is not set
+ # CONFIG_CRYPTO_CRC32C is not set
+ # CONFIG_CRYPTO_CAMELLIA is not set
+ # CONFIG_CRYPTO_TEST is not set
+-
+-#
+-# Hardware crypto devices
+-#
++# CONFIG_CRYPTO_AUTHENC is not set
++CONFIG_CRYPTO_HW=y
+ 
+ #
+ # Library routines
+@@ -1018,8 +1138,9 @@ CONFIG_CRYPTO_DEFLATE=y
+ CONFIG_BITREVERSE=y
+ CONFIG_CRC_CCITT=m
+ # CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC_ITU_T=m
+ CONFIG_CRC32=y
++CONFIG_CRC7=m
+ # CONFIG_LIBCRC32C is not set
+ CONFIG_ZLIB_INFLATE=y
+ CONFIG_ZLIB_DEFLATE=y
 diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
-index 3b977fd..3708066 100644
+index 3b977fd..46e1c78 100644
 --- a/arch/avr32/configs/atstk1002_defconfig
 +++ b/arch/avr32/configs/atstk1002_defconfig
-@@ -1,7 +1,7 @@
+@@ -1,48 +1,48 @@
  #
  # Automatically generated make config: don't edit
 -# Linux kernel version: 2.6.22-rc5
 -# Sat Jun 23 15:32:08 2007
-+# Linux kernel version: 2.6.22.atmel.2
-+# Thu Jul 19 13:46:47 2007
++# Linux kernel version: 2.6.24
++# Tue Feb  5 18:00:06 2008
  #
  CONFIG_AVR32=y
  CONFIG_GENERIC_GPIO=y
-@@ -80,10 +80,10 @@ CONFIG_BASE_SMALL=1
+ CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ CONFIG_HARDIRQS_SW_RESEND=y
+ CONFIG_GENERIC_IRQ_PROBE=y
+ CONFIG_RWSEM_GENERIC_SPINLOCK=y
+ CONFIG_GENERIC_TIME=y
++# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+ # CONFIG_ARCH_HAS_ILOG2_U32 is not set
+ # CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_ARCH_SUPPORTS_OPROFILE=y
+ CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_CALIBRATE_DELAY=y
+ CONFIG_GENERIC_BUG=y
+ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+ 
  #
+-# Code maturity level options
++# General setup
+ #
+ CONFIG_EXPERIMENTAL=y
+ CONFIG_BROKEN_ON_SMP=y
+ CONFIG_INIT_ENV_ARG_LIMIT=32
+-
+-#
+-# General setup
+-#
+ CONFIG_LOCALVERSION=""
+ # CONFIG_LOCALVERSION_AUTO is not set
+ CONFIG_SWAP=y
+ CONFIG_SYSVIPC=y
+-# CONFIG_IPC_NS is not set
+ CONFIG_SYSVIPC_SYSCTL=y
+ CONFIG_POSIX_MQUEUE=y
+-CONFIG_BSD_PROCESS_ACCT=y
+-CONFIG_BSD_PROCESS_ACCT_V3=y
+-CONFIG_TASKSTATS=y
+-CONFIG_TASK_DELAY_ACCT=y
+-# CONFIG_TASK_XACCT is not set
+-# CONFIG_UTS_NS is not set
+-CONFIG_AUDIT=y
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
++# CONFIG_AUDIT is not set
+ # CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++# CONFIG_FAIR_GROUP_SCHED is not set
+ CONFIG_SYSFS_DEPRECATED=y
+ CONFIG_RELAY=y
+ CONFIG_BLK_DEV_INITRD=y
+@@ -63,35 +63,28 @@ CONFIG_FUTEX=y
+ CONFIG_ANON_INODES=y
+ CONFIG_EPOLL=y
+ CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+ CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+ CONFIG_VM_EVENT_COUNTERS=y
+-# CONFIG_SLUB_DEBUG is not set
++CONFIG_SLUB_DEBUG=y
+ # CONFIG_SLAB is not set
+ CONFIG_SLUB=y
+ # CONFIG_SLOB is not set
++CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
+ # CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=1
+-
+-#
+-# Loadable module support
+-#
  CONFIG_MODULES=y
  CONFIG_MODULE_UNLOAD=y
--# CONFIG_MODULE_FORCE_UNLOAD is not set
-+CONFIG_MODULE_FORCE_UNLOAD=y
+ # CONFIG_MODULE_FORCE_UNLOAD is not set
  # CONFIG_MODVERSIONS is not set
  # CONFIG_MODULE_SRCVERSION_ALL is not set
--# CONFIG_KMOD is not set
-+CONFIG_KMOD=y
+ # CONFIG_KMOD is not set
+-
+-#
+-# Block layer
+-#
+ CONFIG_BLOCK=y
+ # CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
+ # CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
  
  #
- # Block layer
-@@ -99,12 +99,12 @@ CONFIG_BLOCK=y
+ # IO Schedulers
+@@ -99,12 +92,12 @@ CONFIG_BLOCK=y
  CONFIG_IOSCHED_NOOP=y
  # CONFIG_IOSCHED_AS is not set
  # CONFIG_IOSCHED_DEADLINE is not set
@@ -856,85 +2353,331 @@ index 3b977fd..3708066 100644
  
  #
  # System Type and features
-@@ -117,6 +117,11 @@ CONFIG_CPU_AT32AP7000=y
- CONFIG_BOARD_ATSTK1002=y
+@@ -113,18 +106,30 @@ CONFIG_SUBARCH_AVR32B=y
+ CONFIG_MMU=y
+ CONFIG_PERFORMANCE_COUNTERS=y
+ CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP700X=y
+ CONFIG_CPU_AT32AP7000=y
+-CONFIG_BOARD_ATSTK1002=y
  CONFIG_BOARD_ATSTK1000=y
  # CONFIG_BOARD_ATNGW100 is not set
-+# CONFIG_BOARD_ATSTK1002_CUSTOM is not set
-+# CONFIG_BOARD_ATSTK1002_SPI1 is not set
-+# CONFIG_BOARD_ATSTK1002_J2_LED is not set
-+# CONFIG_BOARD_ATSTK1002_J2_LED8 is not set
-+# CONFIG_BOARD_ATSTK1002_J2_RGB is not set
++CONFIG_BOARD_ATSTK1002=y
++# CONFIG_BOARD_ATSTK1003 is not set
++# CONFIG_BOARD_ATSTK1004 is not set
++# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
++# CONFIG_BOARD_ATSTK100X_SPI1 is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
++# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
++CONFIG_BOARD_ATSTK1000_EXTDAC=y
++# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
++# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
  CONFIG_LOADER_U_BOOT=y
  
  #
-@@ -125,6 +130,7 @@ CONFIG_LOADER_U_BOOT=y
- # CONFIG_AP7000_32_BIT_SMC is not set
- CONFIG_AP7000_16_BIT_SMC=y
- # CONFIG_AP7000_8_BIT_SMC is not set
+ # Atmel AVR32 AP options
+ #
+-# CONFIG_AP7000_32_BIT_SMC is not set
+-CONFIG_AP7000_16_BIT_SMC=y
+-# CONFIG_AP7000_8_BIT_SMC is not set
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
 +CONFIG_GPIO_DEV=y
  CONFIG_LOAD_ADDRESS=0x10000000
  CONFIG_ENTRY_ADDRESS=0x90000000
  CONFIG_PHYS_OFFSET=0x10000000
-@@ -148,6 +154,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
+@@ -144,10 +149,14 @@ CONFIG_FLATMEM_MANUAL=y
+ CONFIG_FLATMEM=y
+ CONFIG_FLAT_NODE_MEM_MAP=y
+ # CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+ CONFIG_SPLIT_PTLOCK_CPUS=4
  # CONFIG_RESOURCES_64BIT is not set
  CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
  # CONFIG_OWNERSHIP_TRACE is not set
++CONFIG_NMI_DEBUGGING=y
 +CONFIG_DW_DMAC=y
  # CONFIG_HZ_100 is not set
  CONFIG_HZ_250=y
  # CONFIG_HZ_300 is not set
-@@ -156,6 +163,27 @@ CONFIG_HZ=250
+@@ -156,13 +165,31 @@ CONFIG_HZ=250
  CONFIG_CMDLINE=""
  
  #
-+# Power managment options
-+#
-+
-+#
+-# Bus options
++# Power management options
+ #
+-# CONFIG_ARCH_SUPPORTS_MSI is not set
+ 
+ #
+-# PCCARD (PCMCIA/CardBus) support
 +# CPU Frequency scaling
 +#
 +CONFIG_CPU_FREQ=y
 +CONFIG_CPU_FREQ_TABLE=y
 +# CONFIG_CPU_FREQ_DEBUG is not set
-+CONFIG_CPU_FREQ_STAT=m
-+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
++# CONFIG_CPU_FREQ_STAT is not set
 +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
 +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 +CONFIG_CPU_FREQ_GOV_USERSPACE=y
 +CONFIG_CPU_FREQ_GOV_ONDEMAND=y
 +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 +CONFIG_CPU_FREQ_AT32AP=y
 +
+ #
++# Bus options
 +#
- # Bus options
++# CONFIG_ARCH_SUPPORTS_MSI is not set
+ # CONFIG_PCCARD is not set
+ 
  #
- # CONFIG_ARCH_SUPPORTS_MSI is not set
-@@ -327,6 +355,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+@@ -182,7 +209,12 @@ CONFIG_NET=y
+ CONFIG_PACKET=y
+ CONFIG_PACKET_MMAP=y
+ CONFIG_UNIX=y
+-# CONFIG_NET_KEY is not set
++CONFIG_XFRM=y
++CONFIG_XFRM_USER=m
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++CONFIG_NET_KEY=m
++# CONFIG_NET_KEY_MIGRATE is not set
+ CONFIG_INET=y
+ # CONFIG_IP_MULTICAST is not set
+ # CONFIG_IP_ADVANCED_ROUTER is not set
+@@ -191,36 +223,52 @@ CONFIG_IP_PNP=y
+ CONFIG_IP_PNP_DHCP=y
+ # CONFIG_IP_PNP_BOOTP is not set
+ # CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
++CONFIG_NET_IPIP=m
++CONFIG_NET_IPGRE=m
+ # CONFIG_ARPD is not set
+ # CONFIG_SYN_COOKIES is not set
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
++CONFIG_INET_AH=m
++CONFIG_INET_ESP=m
+ # CONFIG_INET_IPCOMP is not set
+ # CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_BEET is not set
++CONFIG_INET_TUNNEL=m
++CONFIG_INET_XFRM_MODE_TRANSPORT=m
++CONFIG_INET_XFRM_MODE_TUNNEL=m
++CONFIG_INET_XFRM_MODE_BEET=m
++# CONFIG_INET_LRO is not set
+ CONFIG_INET_DIAG=y
+ CONFIG_INET_TCP_DIAG=y
+ # CONFIG_TCP_CONG_ADVANCED is not set
+ CONFIG_TCP_CONG_CUBIC=y
+ CONFIG_DEFAULT_TCP_CONG="cubic"
+ # CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
++CONFIG_IPV6=m
++# CONFIG_IPV6_PRIVACY is not set
++# CONFIG_IPV6_ROUTER_PREF is not set
++# CONFIG_IPV6_OPTIMISTIC_DAD is not set
++CONFIG_INET6_AH=m
++CONFIG_INET6_ESP=m
++CONFIG_INET6_IPCOMP=m
++# CONFIG_IPV6_MIP6 is not set
++CONFIG_INET6_XFRM_TUNNEL=m
++CONFIG_INET6_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_TRANSPORT=m
++CONFIG_INET6_XFRM_MODE_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_BEET=m
++# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
++CONFIG_IPV6_SIT=m
++CONFIG_IPV6_TUNNEL=m
++# CONFIG_IPV6_MULTIPLE_TABLES is not set
+ # CONFIG_NETWORK_SECMARK is not set
+ # CONFIG_NETFILTER is not set
+ # CONFIG_IP_DCCP is not set
+ # CONFIG_IP_SCTP is not set
+ # CONFIG_TIPC is not set
+ # CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
++CONFIG_BRIDGE=m
+ # CONFIG_VLAN_8021Q is not set
+ # CONFIG_DECNET is not set
++CONFIG_LLC=m
+ # CONFIG_LLC2 is not set
+ # CONFIG_IPX is not set
+ # CONFIG_ATALK is not set
+@@ -228,16 +276,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
+ # CONFIG_LAPB is not set
+ # CONFIG_ECONET is not set
+ # CONFIG_WAN_ROUTER is not set
+-
+-#
+-# QoS and/or fair queueing
+-#
+ # CONFIG_NET_SCHED is not set
+ 
+ #
+ # Network testing
+ #
+ # CONFIG_NET_PKTGEN is not set
++# CONFIG_NET_TCPPROBE is not set
+ # CONFIG_HAMRADIO is not set
+ # CONFIG_IRDA is not set
+ # CONFIG_BT is not set
+@@ -251,6 +296,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
+ # CONFIG_MAC80211 is not set
+ # CONFIG_IEEE80211 is not set
+ # CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
+ 
+ #
+ # Device Drivers
+@@ -259,16 +305,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
+ #
+ # Generic Driver Options
+ #
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+ CONFIG_STANDALONE=y
+ # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+ # CONFIG_FW_LOADER is not set
+ # CONFIG_DEBUG_DRIVER is not set
+ # CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+-
+-#
+-# Connector - unified userspace <-> kernelspace linker
+-#
+ # CONFIG_CONNECTOR is not set
+ CONFIG_MTD=y
+ # CONFIG_MTD_DEBUG is not set
+@@ -288,6 +331,7 @@ CONFIG_MTD_BLOCK=y
+ # CONFIG_INFTL is not set
+ # CONFIG_RFD_FTL is not set
+ # CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
+ 
+ #
+ # RAM/ROM/Flash chip drivers
+@@ -327,6 +371,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
  #
  # Self-contained MTD device drivers
  #
 +CONFIG_MTD_DATAFLASH=m
-+# CONFIG_MTD_M25P80 is not set
++CONFIG_MTD_M25P80=m
  # CONFIG_MTD_SLRAM is not set
  # CONFIG_MTD_PHRAM is not set
  # CONFIG_MTD_MTDRAM is not set
-@@ -373,7 +403,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
- #
- # Misc devices
+@@ -345,20 +391,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+ # UBI - Unsorted block images
  #
+ # CONFIG_MTD_UBI is not set
+-
+-#
+-# Parallel port support
+-#
+ # CONFIG_PARPORT is not set
+-
+-#
+-# Plug and Play support
+-#
+-# CONFIG_PNPACPI is not set
+-
+-#
+-# Block devices
+-#
++CONFIG_BLK_DEV=y
+ # CONFIG_BLK_DEV_COW_COMMON is not set
+ CONFIG_BLK_DEV_LOOP=m
+ # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+@@ -369,42 +403,88 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
+ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
+-
+-#
+-# Misc devices
+-#
 -# CONFIG_BLINK is not set
++CONFIG_MISC_DEVICES=y
++CONFIG_ATMEL_PWM=m
++# CONFIG_EEPROM_93CX6 is not set
 +CONFIG_ATMEL_SSC=m
  # CONFIG_IDE is not set
  
  #
-@@ -397,13 +427,26 @@ CONFIG_DUMMY=y
+ # SCSI device support
+ #
+ # CONFIG_RAID_ATTRS is not set
+-# CONFIG_SCSI is not set
++CONFIG_SCSI=m
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
+ # CONFIG_SCSI_NETLINK is not set
+-# CONFIG_ATA is not set
++# CONFIG_SCSI_PROC_FS is not set
+ 
+ #
+-# Multi-device support (RAID and LVM)
++# SCSI support type (disk, tape, CD-ROM)
+ #
+-# CONFIG_MD is not set
++CONFIG_BLK_DEV_SD=m
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++CONFIG_BLK_DEV_SR=m
++# CONFIG_BLK_DEV_SR_VENDOR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
+ 
+ #
+-# Network device support
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
+ #
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++# CONFIG_SCSI_LOWLEVEL is not set
++CONFIG_ATA=m
++# CONFIG_ATA_NONSTANDARD is not set
++CONFIG_PATA_AT32=m
++# CONFIG_PATA_PLATFORM is not set
++# CONFIG_MD is not set
+ CONFIG_NETDEVICES=y
+-CONFIG_DUMMY=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
  # CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
  # CONFIG_EQUALIZER is not set
  CONFIG_TUN=m
 -# CONFIG_PHYLIB is not set
+-
+-#
+-# Ethernet (10 or 100Mbit)
+-#
++# CONFIG_VETH is not set
 +CONFIG_PHYLIB=y
 +
 +#
@@ -943,46 +2686,67 @@ index 3b977fd..3708066 100644
 +# CONFIG_MARVELL_PHY is not set
 +# CONFIG_DAVICOM_PHY is not set
 +# CONFIG_QSEMI_PHY is not set
-+CONFIG_LXT_PHY=y
++# CONFIG_LXT_PHY is not set
 +# CONFIG_CICADA_PHY is not set
 +# CONFIG_VITESSE_PHY is not set
 +# CONFIG_SMSC_PHY is not set
 +# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
 +# CONFIG_FIXED_PHY is not set
- 
- #
- # Ethernet (10 or 100Mbit)
- #
++# CONFIG_MDIO_BITBANG is not set
  CONFIG_NET_ETHERNET=y
 -CONFIG_MII=y
 +# CONFIG_MII is not set
  CONFIG_MACB=y
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
  # CONFIG_NETDEV_1000 is not set
  # CONFIG_NETDEV_10000 is not set
-@@ -443,7 +486,42 @@ CONFIG_SLHC=m
+ 
+@@ -423,27 +503,54 @@ CONFIG_PPP_DEFLATE=m
+ CONFIG_PPP_BSDCOMP=m
+ # CONFIG_PPP_MPPE is not set
+ # CONFIG_PPPOE is not set
++# CONFIG_PPPOL2TP is not set
+ # CONFIG_SLIP is not set
+ CONFIG_SLHC=m
+ # CONFIG_SHAPER is not set
+ # CONFIG_NETCONSOLE is not set
+ # CONFIG_NETPOLL is not set
+ # CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
+ 
  #
- # Input device support
+-# ISDN subsystem
++# Input device support
  #
--# CONFIG_INPUT is not set
+-# CONFIG_ISDN is not set
 +CONFIG_INPUT=m
 +# CONFIG_INPUT_FF_MEMLESS is not set
 +CONFIG_INPUT_POLLDEV=m
-+
-+#
+ 
+ #
+-# Telephony Support
 +# Userland interfaces
-+#
+ #
+-# CONFIG_PHONE is not set
 +CONFIG_INPUT_MOUSEDEV=m
 +CONFIG_INPUT_MOUSEDEV_PSAUX=y
 +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 +# CONFIG_INPUT_JOYDEV is not set
-+# CONFIG_INPUT_TSDEV is not set
-+# CONFIG_INPUT_EVDEV is not set
++CONFIG_INPUT_EVDEV=m
 +# CONFIG_INPUT_EVBUG is not set
-+
-+#
+ 
+ #
+-# Input device support
 +# Input Device Drivers
-+#
+ #
+-# CONFIG_INPUT is not set
 +CONFIG_INPUT_KEYBOARD=y
 +# CONFIG_KEYBOARD_ATKBD is not set
 +# CONFIG_KEYBOARD_SUNKBD is not set
@@ -1003,35 +2767,38 @@ index 3b977fd..3708066 100644
  
  #
  # Hardware I/O ports
-@@ -477,7 +555,15 @@ CONFIG_UNIX98_PTYS=y
- # IPMI
+@@ -467,40 +574,94 @@ CONFIG_SLHC=m
  #
+ CONFIG_SERIAL_ATMEL=y
+ CONFIG_SERIAL_ATMEL_CONSOLE=y
++CONFIG_SERIAL_ATMEL_PDC=y
+ # CONFIG_SERIAL_ATMEL_TTYAT is not set
+ CONFIG_SERIAL_CORE=y
+ CONFIG_SERIAL_CORE_CONSOLE=y
+ CONFIG_UNIX98_PTYS=y
+ # CONFIG_LEGACY_PTYS is not set
+-
+-#
+-# IPMI
+-#
  # CONFIG_IPMI_HANDLER is not set
 -# CONFIG_WATCHDOG is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT32AP700X_WDT=y
-+CONFIG_AT32AP700X_WDT_TIMEOUT=2
  # CONFIG_HW_RANDOM is not set
  # CONFIG_RTC is not set
  # CONFIG_GEN_RTC is not set
-@@ -488,13 +574,61 @@ CONFIG_UNIX98_PTYS=y
- # TPM devices
- #
- # CONFIG_TCG_TPM is not set
--# CONFIG_I2C is not set
+ # CONFIG_R3964 is not set
+ # CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
 +CONFIG_I2C=m
 +CONFIG_I2C_BOARDINFO=y
 +CONFIG_I2C_CHARDEV=m
-+
-+#
+ 
+ #
+-# TPM devices
 +# I2C Algorithms
-+#
+ #
+-# CONFIG_TCG_TPM is not set
+-# CONFIG_I2C is not set
 +CONFIG_I2C_ALGOBIT=m
 +# CONFIG_I2C_ALGOPCF is not set
 +# CONFIG_I2C_ALGOPCA is not set
@@ -1040,11 +2807,11 @@ index 3b977fd..3708066 100644
 +# I2C Hardware Bus support
 +#
 +CONFIG_I2C_ATMELTWI=m
-+CONFIG_I2C_ATMELTWI_BAUDRATE=100000
 +CONFIG_I2C_GPIO=m
 +# CONFIG_I2C_OCORES is not set
 +# CONFIG_I2C_PARPORT_LIGHT is not set
 +# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
 +# CONFIG_I2C_STUB is not set
 +
 +#
@@ -1052,11 +2819,13 @@ index 3b977fd..3708066 100644
 +#
 +# CONFIG_SENSORS_DS1337 is not set
 +# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_DS1682 is not set
 +# CONFIG_SENSORS_EEPROM is not set
 +# CONFIG_SENSORS_PCF8574 is not set
 +# CONFIG_SENSORS_PCA9539 is not set
 +# CONFIG_SENSORS_PCF8591 is not set
 +# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
 +# CONFIG_I2C_DEBUG_CORE is not set
 +# CONFIG_I2C_DEBUG_ALGO is not set
 +# CONFIG_I2C_DEBUG_BUS is not set
@@ -1070,43 +2839,54 @@ index 3b977fd..3708066 100644
 +CONFIG_SPI=y
 +# CONFIG_SPI_DEBUG is not set
 +CONFIG_SPI_MASTER=y
-+
-+#
+ 
+ #
+-# Dallas's 1-wire bus
 +# SPI Master Controller Drivers
 +#
 +CONFIG_SPI_ATMEL=y
 +# CONFIG_SPI_BITBANG is not set
 +
-+#
+ #
 +# SPI Protocol Masters
 +#
 +# CONFIG_SPI_AT25 is not set
 +CONFIG_SPI_SPIDEV=m
++# CONFIG_SPI_TLE62X0 is not set
+ # CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
+ # CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
  
  #
- # Dallas's 1-wire bus
-@@ -517,19 +651,91 @@ CONFIG_UNIX98_PTYS=y
+ # Multifunction device drivers
+@@ -517,23 +678,104 @@ CONFIG_UNIX98_PTYS=y
  #
  # Graphics support
  #
 -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+CONFIG_BACKLIGHT_LCD_SUPPORT=y
-+CONFIG_LCD_CLASS_DEVICE=y
-+CONFIG_LCD_LTV350QV=y
-+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
- 
- #
- # Display device support
- #
- # CONFIG_DISPLAY_SUPPORT is not set
- # CONFIG_VGASTATE is not set
--# CONFIG_FB is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 +CONFIG_FB=y
 +# CONFIG_FIRMWARE_EDID is not set
 +# CONFIG_FB_DDC is not set
 +CONFIG_FB_CFB_FILLRECT=y
 +CONFIG_FB_CFB_COPYAREA=y
 +CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 +# CONFIG_FB_SYS_FILLRECT is not set
 +# CONFIG_FB_SYS_COPYAREA is not set
 +# CONFIG_FB_SYS_IMAGEBLIT is not set
@@ -1124,6 +2904,17 @@ index 3b977fd..3708066 100644
 +# CONFIG_FB_S1D13XXX is not set
 +CONFIG_FB_ATMEL=y
 +# CONFIG_FB_VIRTUAL is not set
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_LCD_CLASS_DEVICE=y
++CONFIG_LCD_LTV350QV=y
++# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+ 
+ #
+ # Display device support
+ #
+ # CONFIG_DISPLAY_SUPPORT is not set
+-# CONFIG_VGASTATE is not set
+-# CONFIG_FB is not set
 +# CONFIG_LOGO is not set
  
  #
@@ -1145,19 +2936,25 @@ index 3b977fd..3708066 100644
 +CONFIG_SND_PCM_OSS_PLUGINS=y
 +# CONFIG_SND_DYNAMIC_MINORS is not set
 +# CONFIG_SND_SUPPORT_OLD_API is not set
-+CONFIG_SND_VERBOSE_PROCFS=y
++# CONFIG_SND_VERBOSE_PROCFS is not set
 +# CONFIG_SND_VERBOSE_PRINTK is not set
 +# CONFIG_SND_DEBUG is not set
 +
 +#
 +# Generic devices
 +#
++CONFIG_SND_AC97_CODEC=m
 +# CONFIG_SND_DUMMY is not set
 +# CONFIG_SND_MTPAV is not set
 +# CONFIG_SND_SERIAL_U16550 is not set
 +# CONFIG_SND_MPU401 is not set
 +
 +#
++# AVR32 devices
++#
++CONFIG_SND_ATMEL_AC97=m
++
++#
 +# SPI devices
 +#
 +CONFIG_SND_AT73C213=m
@@ -1169,34 +2966,50 @@ index 3b977fd..3708066 100644
 +# CONFIG_SND_SOC is not set
 +
 +#
-+# Open Sound System
-+#
-+# CONFIG_SOUND_PRIME is not set
-+
-+#
-+# HID Devices
++# SoC Audio support for SuperH
 +#
-+# CONFIG_HID is not set
  
  #
- # USB support
-@@ -545,21 +751,59 @@ CONFIG_UNIX98_PTYS=y
+-# USB support
++# Open Sound System
+ #
++CONFIG_SOUND_PRIME=m
++# CONFIG_SOUND_MSNDCLAS is not set
++# CONFIG_SOUND_MSNDPIN is not set
++CONFIG_SOUND_AT32_ABDAC=m
++CONFIG_AC97_BUS=m
++# CONFIG_HID_SUPPORT is not set
++CONFIG_USB_SUPPORT=y
+ # CONFIG_USB_ARCH_HAS_HCD is not set
+ # CONFIG_USB_ARCH_HAS_OHCI is not set
+ # CONFIG_USB_ARCH_HAS_EHCI is not set
+@@ -545,63 +787,137 @@ CONFIG_UNIX98_PTYS=y
  #
  # USB Gadget Support
  #
 -# CONFIG_USB_GADGET is not set
 -# CONFIG_MMC is not set
+-
+-#
+-# LED devices
+-#
+-# CONFIG_NEW_LEDS is not set
 +CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
 +# CONFIG_USB_GADGET_DEBUG_FILES is not set
++# CONFIG_USB_GADGET_DEBUG_FS is not set
 +CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
 +# CONFIG_USB_GADGET_FSL_USB2 is not set
 +# CONFIG_USB_GADGET_NET2280 is not set
 +# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
 +# CONFIG_USB_GADGET_GOKU is not set
 +# CONFIG_USB_GADGET_LH7A40X is not set
-+CONFIG_USB_GADGET_ATMEL_USBA=y
-+CONFIG_USB_ATMEL_USBA=y
 +# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
 +# CONFIG_USB_GADGET_AT91 is not set
 +# CONFIG_USB_GADGET_DUMMY_HCD is not set
 +CONFIG_USB_GADGET_DUALSPEED=y
@@ -1216,22 +3029,21 @@ index 3b977fd..3708066 100644
 +# MMC/SD Card Drivers
 +#
 +CONFIG_MMC_BLOCK=y
++# CONFIG_MMC_BLOCK_BOUNCE is not set
++# CONFIG_SDIO_UART is not set
 +
 +#
 +# MMC/SD Host Controller Drivers
 +#
 +CONFIG_MMC_ATMELMCI=y
- 
- #
- # LED devices
- #
--# CONFIG_NEW_LEDS is not set
++CONFIG_MMC_SPI=m
 +CONFIG_NEW_LEDS=y
 +CONFIG_LEDS_CLASS=m
  
  #
  # LED drivers
  #
++CONFIG_LEDS_ATMEL_PWM=m
 +CONFIG_LEDS_GPIO=m
  
  #
@@ -1240,32 +3052,28 @@ index 3b977fd..3708066 100644
 +CONFIG_LEDS_TRIGGERS=y
 +CONFIG_LEDS_TRIGGER_TIMER=m
 +CONFIG_LEDS_TRIGGER_HEARTBEAT=m
- 
- #
- # InfiniBand support
-@@ -572,7 +816,50 @@ CONFIG_UNIX98_PTYS=y
- #
- # Real Time Clock
- #
--# CONFIG_RTC_CLASS is not set
 +CONFIG_RTC_LIB=y
 +CONFIG_RTC_CLASS=y
-+# CONFIG_RTC_HCTOSYS is not set
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 +# CONFIG_RTC_DEBUG is not set
-+
-+#
+ 
+ #
+-# InfiniBand support
 +# RTC interfaces
-+#
+ #
 +CONFIG_RTC_INTF_SYSFS=y
 +CONFIG_RTC_INTF_PROC=y
 +CONFIG_RTC_INTF_DEV=y
 +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
 +# CONFIG_RTC_DRV_TEST is not set
-+
-+#
+ 
+ #
+-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
 +# I2C RTC drivers
-+#
+ #
 +# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
 +# CONFIG_RTC_DRV_DS1672 is not set
 +# CONFIG_RTC_DRV_MAX6900 is not set
 +# CONFIG_RTC_DRV_RS5C372 is not set
@@ -1273,29 +3081,40 @@ index 3b977fd..3708066 100644
 +# CONFIG_RTC_DRV_X1205 is not set
 +# CONFIG_RTC_DRV_PCF8563 is not set
 +# CONFIG_RTC_DRV_PCF8583 is not set
-+
-+#
++# CONFIG_RTC_DRV_M41T80 is not set
+ 
+ #
+-# Real Time Clock
 +# SPI RTC drivers
-+#
+ #
+-# CONFIG_RTC_CLASS is not set
 +# CONFIG_RTC_DRV_RS5C348 is not set
 +# CONFIG_RTC_DRV_MAX6902 is not set
-+
-+#
+ 
+ #
+-# DMA Engine support
 +# Platform RTC drivers
-+#
+ #
+-# CONFIG_DMA_ENGINE is not set
 +# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
 +# CONFIG_RTC_DRV_DS1742 is not set
 +# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
 +# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
+ 
+ #
+-# DMA Clients
 +# on-CPU RTC drivers
-+#
+ #
 +CONFIG_RTC_DRV_AT32AP700X=y
  
  #
- # DMA Engine support
-@@ -590,11 +877,14 @@ CONFIG_UNIX98_PTYS=y
+-# DMA Devices
++# Userspace I/O
+ #
++# CONFIG_UIO is not set
+ 
  #
  # File systems
  #
@@ -1312,7 +3131,15 @@ index 3b977fd..3708066 100644
  # CONFIG_REISERFS_FS is not set
  # CONFIG_JFS_FS is not set
  # CONFIG_FS_POSIX_ACL is not set
-@@ -609,7 +899,7 @@ CONFIG_INOTIFY_USER=y
+ # CONFIG_XFS_FS is not set
+ # CONFIG_GFS2_FS is not set
+ # CONFIG_OCFS2_FS is not set
+-CONFIG_MINIX_FS=m
++# CONFIG_MINIX_FS is not set
+ # CONFIG_ROMFS_FS is not set
+ CONFIG_INOTIFY=y
+ CONFIG_INOTIFY_USER=y
+@@ -609,7 +925,7 @@ CONFIG_INOTIFY_USER=y
  # CONFIG_DNOTIFY is not set
  # CONFIG_AUTOFS_FS is not set
  # CONFIG_AUTOFS4_FS is not set
@@ -1321,32 +3148,1856 @@ index 3b977fd..3708066 100644
  
  #
  # CD-ROM/DVD Filesystems
-@@ -638,7 +928,7 @@ CONFIG_TMPFS=y
+@@ -637,8 +953,7 @@ CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
  # CONFIG_TMPFS_POSIX_ACL is not set
  # CONFIG_HUGETLB_PAGE is not set
- CONFIG_RAMFS=y
+-CONFIG_RAMFS=y
 -CONFIG_CONFIGFS_FS=m
 +CONFIG_CONFIGFS_FS=y
  
  #
  # Miscellaneous filesystems
-@@ -683,8 +973,14 @@ CONFIG_SUNRPC=y
- # CONFIG_SUNRPC_BIND34 is not set
- # CONFIG_RPCSEC_GSS_KRB5 is not set
- # CONFIG_RPCSEC_GSS_SPKM3 is not set
--# CONFIG_SMB_FS is not set
--# CONFIG_CIFS is not set
-+CONFIG_SMB_FS=m
-+# CONFIG_SMB_NLS_DEFAULT is not set
-+CONFIG_CIFS=m
-+# CONFIG_CIFS_STATS is not set
-+# CONFIG_CIFS_WEAK_PW_HASH is not set
-+# CONFIG_CIFS_XATTR is not set
-+# CONFIG_CIFS_DEBUG2 is not set
-+# CONFIG_CIFS_EXPERIMENTAL is not set
+@@ -652,11 +967,12 @@ CONFIG_CONFIGFS_FS=m
+ # CONFIG_EFS_FS is not set
+ CONFIG_JFFS2_FS=y
+ CONFIG_JFFS2_FS_DEBUG=0
+-CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WRITEBUFFER is not set
+ # CONFIG_JFFS2_SUMMARY is not set
+ # CONFIG_JFFS2_FS_XATTR is not set
+ # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+ CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
+ CONFIG_JFFS2_RTIME=y
+ # CONFIG_JFFS2_RUBIN is not set
+ # CONFIG_CRAMFS is not set
+@@ -665,10 +981,7 @@ CONFIG_JFFS2_RTIME=y
+ # CONFIG_QNX4FS_FS is not set
+ # CONFIG_SYSV_FS is not set
+ # CONFIG_UFS_FS is not set
+-
+-#
+-# Network File Systems
+-#
++CONFIG_NETWORK_FILESYSTEMS=y
+ CONFIG_NFS_FS=y
+ CONFIG_NFS_V3=y
+ # CONFIG_NFS_V3_ACL is not set
+@@ -688,17 +1001,12 @@ CONFIG_SUNRPC=y
  # CONFIG_NCP_FS is not set
  # CONFIG_CODA_FS is not set
  # CONFIG_AFS_FS is not set
+-# CONFIG_9P_FS is not set
+ 
+ #
+ # Partition Types
+ #
+ # CONFIG_PARTITION_ADVANCED is not set
+ CONFIG_MSDOS_PARTITION=y
+-
+-#
+-# Native Language Support
+-#
+ CONFIG_NLS=m
+ CONFIG_NLS_DEFAULT="iso8859-1"
+ CONFIG_NLS_CODEPAGE_437=m
+@@ -739,17 +1047,18 @@ CONFIG_NLS_ISO8859_1=m
+ # CONFIG_NLS_KOI8_R is not set
+ # CONFIG_NLS_KOI8_U is not set
+ CONFIG_NLS_UTF8=m
+-
+-#
+-# Distributed Lock Manager
+-#
+ # CONFIG_DLM is not set
++CONFIG_INSTRUMENTATION=y
++CONFIG_PROFILING=y
++CONFIG_OPROFILE=m
++CONFIG_KPROBES=y
++# CONFIG_MARKERS is not set
+ 
+ #
+ # Kernel hacking
+ #
+-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ # CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
+ CONFIG_ENABLE_MUST_CHECK=y
+ CONFIG_MAGIC_SYSRQ=y
+ # CONFIG_UNUSED_SYMBOLS is not set
+@@ -758,12 +1067,17 @@ CONFIG_DEBUG_FS=y
+ CONFIG_DEBUG_KERNEL=y
+ # CONFIG_DEBUG_SHIRQ is not set
+ CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
+ # CONFIG_SCHEDSTATS is not set
+ # CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+ # CONFIG_RT_MUTEX_TESTER is not set
+ # CONFIG_DEBUG_SPINLOCK is not set
+ # CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
+ # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+ # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+ # CONFIG_DEBUG_KOBJECT is not set
+@@ -771,22 +1085,63 @@ CONFIG_DEBUG_BUGVERBOSE=y
+ # CONFIG_DEBUG_INFO is not set
+ # CONFIG_DEBUG_VM is not set
+ # CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
+ CONFIG_FRAME_POINTER=y
+ CONFIG_FORCED_INLINING=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_LKDTM is not set
+ # CONFIG_FAULT_INJECTION is not set
+-# CONFIG_KPROBES is not set
++# CONFIG_SAMPLES is not set
+ 
+ #
+ # Security options
+ #
+ # CONFIG_KEYS is not set
+ # CONFIG_SECURITY is not set
+-
+-#
+-# Cryptographic options
+-#
+-# CONFIG_CRYPTO is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=m
++CONFIG_CRYPTO_BLKCIPHER=m
++CONFIG_CRYPTO_HASH=m
++CONFIG_CRYPTO_MANAGER=m
++CONFIG_CRYPTO_HMAC=m
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=m
++CONFIG_CRYPTO_SHA1=m
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++CONFIG_CRYPTO_CBC=m
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=m
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++CONFIG_CRYPTO_DEFLATE=m
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_HW is not set
+ 
+ #
+ # Library routines
+@@ -794,10 +1149,10 @@ CONFIG_FORCED_INLINING=y
+ CONFIG_BITREVERSE=y
+ CONFIG_CRC_CCITT=m
+ # CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC_ITU_T=m
+ CONFIG_CRC32=y
++CONFIG_CRC7=m
+ # CONFIG_LIBCRC32C is not set
+-CONFIG_AUDIT_GENERIC=y
+ CONFIG_ZLIB_INFLATE=y
+ CONFIG_ZLIB_DEFLATE=y
+ CONFIG_PLIST=y
+diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig
+new file mode 100644
+index 0000000..d8a6595
+--- /dev/null
++++ b/arch/avr32/configs/atstk1003_defconfig
+@@ -0,0 +1,1032 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.24
++# Tue Feb  5 18:08:36 2008
++#
++CONFIG_AVR32=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_GENERIC_TIME=y
++# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_ARCH_SUPPORTS_OPROFILE=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_BSD_PROCESS_ACCT=y
++CONFIG_BSD_PROCESS_ACCT_V3=y
++CONFIG_TASKSTATS=y
++CONFIG_TASK_DELAY_ACCT=y
++# CONFIG_TASK_XACCT is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
++CONFIG_AUDIT=y
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_FAIR_GROUP_SCHED=y
++CONFIG_FAIR_USER_SCHED=y
++# CONFIG_FAIR_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_RELAY=y
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++# CONFIG_SYSCTL_SYSCALL is not set
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++# CONFIG_BASE_FULL is not set
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++# CONFIG_SLUB_DEBUG is not set
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=1
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++# CONFIG_KMOD is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++# CONFIG_IOSCHED_AS is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
++
++#
++# System Type and features
++#
++CONFIG_SUBARCH_AVR32B=y
++CONFIG_MMU=y
++CONFIG_PERFORMANCE_COUNTERS=y
++CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP700X=y
++CONFIG_CPU_AT32AP7001=y
++CONFIG_BOARD_ATSTK1000=y
++# CONFIG_BOARD_ATNGW100 is not set
++# CONFIG_BOARD_ATSTK1002 is not set
++CONFIG_BOARD_ATSTK1003=y
++# CONFIG_BOARD_ATSTK1004 is not set
++# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
++# CONFIG_BOARD_ATSTK100X_SPI1 is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
++# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
++CONFIG_BOARD_ATSTK1000_EXTDAC=y
++# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
++# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
++CONFIG_LOADER_U_BOOT=y
++
++#
++# Atmel AVR32 AP options
++#
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
++CONFIG_GPIO_DEV=y
++CONFIG_LOAD_ADDRESS=0x10000000
++CONFIG_ENTRY_ADDRESS=0x90000000
++CONFIG_PHYS_OFFSET=0x10000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
++# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
++# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
++CONFIG_ARCH_FLATMEM_ENABLE=y
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_OWNERSHIP_TRACE is not set
++CONFIG_NMI_DEBUGGING=y
++CONFIG_DW_DMAC=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++CONFIG_CMDLINE=""
++
++#
++# Power management options
++#
++
++#
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++# CONFIG_CPU_FREQ_STAT is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
++# Bus options
++#
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Executable file formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++# CONFIG_IP_PNP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_NET_TCPPROBE is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++# CONFIG_PREVENT_FIRMWARE_BUILD is not set
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0x8000000
++CONFIG_MTD_PHYSMAP_LEN=0x0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=2
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++CONFIG_MTD_DATAFLASH=m
++CONFIG_MTD_M25P80=m
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=m
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++CONFIG_BLK_DEV_NBD=m
++CONFIG_BLK_DEV_RAM=m
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=4096
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++CONFIG_ATMEL_PWM=m
++# CONFIG_EEPROM_93CX6 is not set
++CONFIG_ATMEL_SSC=m
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=m
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_SCSI_PROC_FS is not set
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=m
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++CONFIG_BLK_DEV_SR=m
++# CONFIG_BLK_DEV_SR_VENDOR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_SCSI_DEBUG is not set
++CONFIG_ATA=m
++# CONFIG_ATA_NONSTANDARD is not set
++CONFIG_PATA_AT32=m
++# CONFIG_PATA_PLATFORM is not set
++# CONFIG_MD is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_NET_ETHERNET is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++CONFIG_PPP=m
++# CONFIG_PPP_MULTILINK is not set
++# CONFIG_PPP_FILTER is not set
++CONFIG_PPP_ASYNC=m
++# CONFIG_PPP_SYNC_TTY is not set
++CONFIG_PPP_DEFLATE=m
++CONFIG_PPP_BSDCOMP=m
++# CONFIG_PPP_MPPE is not set
++# CONFIG_PPPOE is not set
++# CONFIG_PPPOL2TP is not set
++# CONFIG_SLIP is not set
++CONFIG_SLHC=m
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=m
++# CONFIG_INPUT_FF_MEMLESS is not set
++CONFIG_INPUT_POLLDEV=m
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=m
++CONFIG_INPUT_MOUSEDEV_PSAUX=y
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++CONFIG_KEYBOARD_GPIO=m
++CONFIG_INPUT_MOUSE=y
++# CONFIG_MOUSE_PS2 is not set
++# CONFIG_MOUSE_SERIAL is not set
++# CONFIG_MOUSE_VSXXXAA is not set
++CONFIG_MOUSE_GPIO=m
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++CONFIG_SERIAL_ATMEL_PDC=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_RTC is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_I2C=m
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=m
++
++#
++# I2C Algorithms
++#
++CONFIG_I2C_ALGOBIT=m
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_ATMELTWI=m
++CONFIG_I2C_GPIO=m
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++CONFIG_SPI_SPIDEV=m
++# CONFIG_SPI_TLE62X0 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++CONFIG_SOUND=m
++
++#
++# Advanced Linux Sound Architecture
++#
++CONFIG_SND=m
++CONFIG_SND_TIMER=m
++CONFIG_SND_PCM=m
++# CONFIG_SND_SEQUENCER is not set
++CONFIG_SND_OSSEMUL=y
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_PCM_OSS_PLUGINS=y
++# CONFIG_SND_DYNAMIC_MINORS is not set
++CONFIG_SND_SUPPORT_OLD_API=y
++CONFIG_SND_VERBOSE_PROCFS=y
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++
++#
++# Generic devices
++#
++CONFIG_SND_AC97_CODEC=m
++# CONFIG_SND_DUMMY is not set
++# CONFIG_SND_MTPAV is not set
++# CONFIG_SND_SERIAL_U16550 is not set
++# CONFIG_SND_MPU401 is not set
++
++#
++# AVR32 devices
++#
++CONFIG_SND_ATMEL_AC97=m
++
++#
++# SPI devices
++#
++CONFIG_SND_AT73C213=m
++CONFIG_SND_AT73C213_TARGET_BITRATE=48000
++
++#
++# System on Chip audio support
++#
++# CONFIG_SND_SOC is not set
++
++#
++# SoC Audio support for SuperH
++#
++
++#
++# Open Sound System
++#
++# CONFIG_SOUND_PRIME is not set
++CONFIG_AC97_BUS=m
++# CONFIG_HID_SUPPORT is not set
++CONFIG_USB_SUPPORT=y
++# CONFIG_USB_ARCH_HAS_HCD is not set
++# CONFIG_USB_ARCH_HAS_OHCI is not set
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# USB Gadget Support
++#
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_DEBUG_FS=y
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++CONFIG_USB_ZERO=m
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++# CONFIG_MMC_BLOCK_BOUNCE is not set
++# CONFIG_SDIO_UART is not set
++
++#
++# MMC/SD Host Controller Drivers
++#
++CONFIG_MMC_ATMELMCI=y
++CONFIG_MMC_SPI=m
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++
++#
++# LED drivers
++#
++CONFIG_LEDS_ATMEL_PWM=m
++CONFIG_LEDS_GPIO=y
++
++#
++# LED Triggers
++#
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=y
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT32AP700X=y
++
++#
++# Userspace I/O
++#
++CONFIG_UIO=m
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=m
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=m
++# CONFIG_EXT3_FS_XATTR is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=m
++# CONFIG_JBD_DEBUG is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_DNOTIFY is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++CONFIG_FUSE_FS=m
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=m
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_CONFIGFS_FS=y
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++# CONFIG_NETWORK_FILESYSTEMS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++CONFIG_NLS=m
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=m
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=m
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=m
++# CONFIG_DLM is not set
++CONFIG_INSTRUMENTATION=y
++CONFIG_PROFILING=y
++CONFIG_OPROFILE=m
++CONFIG_KPROBES=y
++# CONFIG_MARKERS is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++CONFIG_FRAME_POINTER=y
++CONFIG_FORCED_INLINING=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_LKDTM is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++# CONFIG_CRYPTO is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_CRC_CCITT=m
++# CONFIG_CRC16 is not set
++CONFIG_CRC_ITU_T=m
++CONFIG_CRC32=y
++CONFIG_CRC7=m
++# CONFIG_LIBCRC32C is not set
++CONFIG_AUDIT_GENERIC=y
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig
+new file mode 100644
+index 0000000..559b065
+--- /dev/null
++++ b/arch/avr32/configs/atstk1004_defconfig
+@@ -0,0 +1,627 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.24
++# Tue Feb  5 18:13:33 2008
++#
++CONFIG_AVR32=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_GENERIC_TIME=y
++# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_ARCH_SUPPORTS_OPROFILE=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++# CONFIG_SYSVIPC is not set
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++# CONFIG_FAIR_GROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++# CONFIG_BLK_DEV_INITRD is not set
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++# CONFIG_SYSCTL_SYSCALL is not set
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++# CONFIG_BASE_FULL is not set
++# CONFIG_FUTEX is not set
++# CONFIG_EPOLL is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_EVENTFD is not set
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++# CONFIG_SLAB is not set
++# CONFIG_SLUB is not set
++CONFIG_SLOB=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=1
++# CONFIG_MODULES is not set
++# CONFIG_BLOCK is not set
++
++#
++# System Type and features
++#
++CONFIG_SUBARCH_AVR32B=y
++CONFIG_MMU=y
++CONFIG_PERFORMANCE_COUNTERS=y
++CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP700X=y
++CONFIG_CPU_AT32AP7002=y
++CONFIG_BOARD_ATSTK1000=y
++# CONFIG_BOARD_ATNGW100 is not set
++# CONFIG_BOARD_ATSTK1002 is not set
++# CONFIG_BOARD_ATSTK1003 is not set
++CONFIG_BOARD_ATSTK1004=y
++# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
++# CONFIG_BOARD_ATSTK100X_SPI1 is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED is not set
++CONFIG_BOARD_ATSTK1000_EXTDAC=y
++# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
++# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
++CONFIG_LOADER_U_BOOT=y
++
++#
++# Atmel AVR32 AP options
++#
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
++# CONFIG_GPIO_DEV is not set
++CONFIG_LOAD_ADDRESS=0x10000000
++CONFIG_ENTRY_ADDRESS=0x90000000
++CONFIG_PHYS_OFFSET=0x10000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
++# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
++# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
++CONFIG_ARCH_FLATMEM_ENABLE=y
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_OWNERSHIP_TRACE is not set
++# CONFIG_NMI_DEBUGGING is not set
++# CONFIG_DW_DMAC is not set
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++CONFIG_CMDLINE=""
++
++#
++# Power management options
++#
++
++#
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++# CONFIG_CPU_FREQ_STAT is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
++# Bus options
++#
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Executable file formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++# CONFIG_IP_PNP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++# CONFIG_PREVENT_FIRMWARE_BUILD is not set
++# CONFIG_FW_LOADER is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0x8000000
++CONFIG_MTD_PHYSMAP_LEN=0x0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=2
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_DATAFLASH is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++# CONFIG_PARPORT is not set
++# CONFIG_MISC_DEVICES is not set
++
++#
++# SCSI device support
++#
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_NETDEVICES is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++# CONFIG_INPUT is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++# CONFIG_SERIAL_ATMEL_PDC is not set
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_RTC is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_TCG_TPM is not set
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++CONFIG_SPI=y
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_SYS_FOPS is not set
++CONFIG_FB_DEFERRED_IO=y
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
++CONFIG_FB_ATMEL=y
++# CONFIG_FB_VIRTUAL is not set
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_LCD_CLASS_DEVICE=y
++CONFIG_LCD_LTV350QV=y
++# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++# CONFIG_LOGO is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_USB_SUPPORT=y
++# CONFIG_USB_ARCH_HAS_HCD is not set
++# CONFIG_USB_ARCH_HAS_OHCI is not set
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# USB Gadget Support
++#
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++# CONFIG_USB_ZERO is not set
++CONFIG_USB_ETH=y
++# CONFIG_USB_ETH_RNDIS is not set
++# CONFIG_USB_GADGETFS is not set
++# CONFIG_USB_FILE_STORAGE is not set
++# CONFIG_USB_G_SERIAL is not set
++# CONFIG_USB_MIDI_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_NEW_LEDS is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++# CONFIG_RTC_INTF_PROC is not set
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT32AP700X=y
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++# CONFIG_INOTIFY is not set
++# CONFIG_QUOTA is not set
++# CONFIG_DNOTIFY is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++# CONFIG_JFFS2_FS_WRITEBUFFER is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++# CONFIG_NETWORK_FILESYSTEMS is not set
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++# CONFIG_INSTRUMENTATION is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_KERNEL is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_SAMPLES is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++# CONFIG_CRYPTO is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
 diff --git a/arch/avr32/drivers/Makefile b/arch/avr32/drivers/Makefile
 new file mode 100644
 index 0000000..b429b75
@@ -2170,21 +5821,218 @@ index 0000000..1f67921
 +
 +#endif /* __AVR32_DW_DMAC_H__ */
 diff --git a/arch/avr32/kernel/Makefile b/arch/avr32/kernel/Makefile
-index 90e5aff..1aedaeb 100644
+index 2d6d48f..88226b6 100644
 --- a/arch/avr32/kernel/Makefile
 +++ b/arch/avr32/kernel/Makefile
-@@ -9,10 +9,6 @@ obj-y				+= syscall_table.o syscall-stubs.o irq.o
- obj-y				+= setup.o traps.o semaphore.o ptrace.o
+@@ -6,9 +6,11 @@ extra-y				:= head.o vmlinux.lds
+ 
+ obj-$(CONFIG_SUBARCH_AVR32B)	+= entry-avr32b.o
+ obj-y				+= syscall_table.o syscall-stubs.o irq.o
+-obj-y				+= setup.o traps.o semaphore.o ptrace.o
++obj-y				+= setup.o traps.o semaphore.o ocd.o ptrace.o
  obj-y				+= signal.o sys_avr32.o process.o time.o
  obj-y				+= init_task.o switch_to.o cpu.o
 +obj-y				+= dma-controller.o
  obj-$(CONFIG_MODULES)		+= module.o avr32_ksyms.o
  obj-$(CONFIG_KPROBES)		+= kprobes.o
--
--USE_STANDARD_AS_RULE		:= true
--
--%.lds: %.lds.c FORCE
--	$(call if_changed_dep,cpp_lds_S)
+ obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
++obj-$(CONFIG_NMI_DEBUGGING)	+= nmi_debug.o
+diff --git a/arch/avr32/kernel/cpu.c b/arch/avr32/kernel/cpu.c
+index 2714cf6..b8409ca 100644
+--- a/arch/avr32/kernel/cpu.c
++++ b/arch/avr32/kernel/cpu.c
+@@ -13,6 +13,7 @@
+ #include <linux/percpu.h>
+ #include <linux/param.h>
+ #include <linux/errno.h>
++#include <linux/clk.h>
+ 
+ #include <asm/setup.h>
+ #include <asm/sysreg.h>
+@@ -187,9 +188,20 @@ static int __init topology_init(void)
+ 
+ subsys_initcall(topology_init);
+ 
++struct chip_id_map {
++	u16	mid;
++	u16	pn;
++	const char *name;
++};
++
++static const struct chip_id_map chip_names[] = {
++	{ .mid = 0x1f, .pn = 0x1e82, .name = "AT32AP700x" },
++};
++#define NR_CHIP_NAMES ARRAY_SIZE(chip_names)
++
+ static const char *cpu_names[] = {
+ 	"Morgan",
+-	"AP7000",
++	"AP7",
+ };
+ #define NR_CPU_NAMES ARRAY_SIZE(cpu_names)
+ 
+@@ -206,12 +218,32 @@ static const char *mmu_types[] = {
+ 	"MPU"
+ };
+ 
++static const char *cpu_feature_flags[] = {
++	"rmw", "dsp", "simd", "ocd", "perfctr", "java", "fpu",
++};
++
++static const char *get_chip_name(struct avr32_cpuinfo *cpu)
++{
++	unsigned int i;
++	unsigned int mid = avr32_get_manufacturer_id(cpu);
++	unsigned int pn = avr32_get_product_number(cpu);
++
++	for (i = 0; i < NR_CHIP_NAMES; i++) {
++		if (chip_names[i].mid == mid && chip_names[i].pn == pn)
++			return chip_names[i].name;
++	}
++
++	return "(unknown)";
++}
++
+ void __init setup_processor(void)
+ {
+ 	unsigned long config0, config1;
+ 	unsigned long features;
+ 	unsigned cpu_id, cpu_rev, arch_id, arch_rev, mmu_type;
++	unsigned device_id;
+ 	unsigned tmp;
++	unsigned i;
+ 
+ 	config0 = sysreg_read(CONFIG0);
+ 	config1 = sysreg_read(CONFIG1);
+@@ -221,11 +253,14 @@ void __init setup_processor(void)
+ 	arch_rev = SYSREG_BFEXT(AR, config0);
+ 	mmu_type = SYSREG_BFEXT(MMUT, config0);
+ 
++	device_id = ocd_read(DID);
++
+ 	boot_cpu_data.arch_type = arch_id;
+ 	boot_cpu_data.cpu_type = cpu_id;
+ 	boot_cpu_data.arch_revision = arch_rev;
+ 	boot_cpu_data.cpu_revision = cpu_rev;
+ 	boot_cpu_data.tlb_config = mmu_type;
++	boot_cpu_data.device_id = device_id;
+ 
+ 	tmp = SYSREG_BFEXT(ILSZ, config1);
+ 	if (tmp) {
+@@ -247,41 +282,34 @@ void __init setup_processor(void)
+ 		return;
+ 	}
+ 
+-	printk ("CPU: %s [%02x] revision %d (%s revision %d)\n",
++	printk ("CPU: %s chip revision %c\n", get_chip_name(&boot_cpu_data),
++			avr32_get_chip_revision(&boot_cpu_data) + 'A');
++	printk ("CPU: %s [%02x] core revision %d (%s arch revision %d)\n",
+ 		cpu_names[cpu_id], cpu_id, cpu_rev,
+ 		arch_names[arch_id], arch_rev);
+ 	printk ("CPU: MMU configuration: %s\n", mmu_types[mmu_type]);
+ 
+ 	printk ("CPU: features:");
+ 	features = 0;
+-	if (config0 & SYSREG_BIT(CONFIG0_R)) {
++	if (config0 & SYSREG_BIT(CONFIG0_R))
+ 		features |= AVR32_FEATURE_RMW;
+-		printk(" rmw");
+-	}
+-	if (config0 & SYSREG_BIT(CONFIG0_D)) {
++	if (config0 & SYSREG_BIT(CONFIG0_D))
+ 		features |= AVR32_FEATURE_DSP;
+-		printk(" dsp");
+-	}
+-	if (config0 & SYSREG_BIT(CONFIG0_S)) {
++	if (config0 & SYSREG_BIT(CONFIG0_S))
+ 		features |= AVR32_FEATURE_SIMD;
+-		printk(" simd");
+-	}
+-	if (config0 & SYSREG_BIT(CONFIG0_O)) {
++	if (config0 & SYSREG_BIT(CONFIG0_O))
+ 		features |= AVR32_FEATURE_OCD;
+-		printk(" ocd");
+-	}
+-	if (config0 & SYSREG_BIT(CONFIG0_P)) {
++	if (config0 & SYSREG_BIT(CONFIG0_P))
+ 		features |= AVR32_FEATURE_PCTR;
+-		printk(" perfctr");
+-	}
+-	if (config0 & SYSREG_BIT(CONFIG0_J)) {
++	if (config0 & SYSREG_BIT(CONFIG0_J))
+ 		features |= AVR32_FEATURE_JAVA;
+-		printk(" java");
+-	}
+-	if (config0 & SYSREG_BIT(CONFIG0_F)) {
++	if (config0 & SYSREG_BIT(CONFIG0_F))
+ 		features |= AVR32_FEATURE_FPU;
+-		printk(" fpu");
+-	}
++
++	for (i = 0; i < ARRAY_SIZE(cpu_feature_flags); i++)
++		if (features & (1 << i))
++			printk(" %s", cpu_feature_flags[i]);
++
+ 	printk("\n");
+ 	boot_cpu_data.features = features;
+ }
+@@ -291,6 +319,8 @@ static int c_show(struct seq_file *m, void *v)
+ {
+ 	unsigned int icache_size, dcache_size;
+ 	unsigned int cpu = smp_processor_id();
++	unsigned int freq;
++	unsigned int i;
+ 
+ 	icache_size = boot_cpu_data.icache.ways *
+ 		boot_cpu_data.icache.sets *
+@@ -301,15 +331,21 @@ static int c_show(struct seq_file *m, void *v)
+ 
+ 	seq_printf(m, "processor\t: %d\n", cpu);
+ 
++	seq_printf(m, "chip type\t: %s revision %c\n",
++			get_chip_name(&boot_cpu_data),
++			avr32_get_chip_revision(&boot_cpu_data) + 'A');
+ 	if (boot_cpu_data.arch_type < NR_ARCH_NAMES)
+-		seq_printf(m, "cpu family\t: %s revision %d\n",
++		seq_printf(m, "cpu arch\t: %s revision %d\n",
+ 			   arch_names[boot_cpu_data.arch_type],
+ 			   boot_cpu_data.arch_revision);
+ 	if (boot_cpu_data.cpu_type < NR_CPU_NAMES)
+-		seq_printf(m, "cpu type\t: %s revision %d\n",
++		seq_printf(m, "cpu core\t: %s revision %d\n",
+ 			   cpu_names[boot_cpu_data.cpu_type],
+ 			   boot_cpu_data.cpu_revision);
+ 
++	freq = (clk_get_rate(boot_cpu_data.clk) + 500) / 1000;
++	seq_printf(m, "cpu MHz\t\t: %u.%03u\n", freq / 1000, freq % 1000);
++
+ 	seq_printf(m, "i-cache\t\t: %dK (%u ways x %u sets x %u)\n",
+ 		   icache_size >> 10,
+ 		   boot_cpu_data.icache.ways,
+@@ -320,7 +356,13 @@ static int c_show(struct seq_file *m, void *v)
+ 		   boot_cpu_data.dcache.ways,
+ 		   boot_cpu_data.dcache.sets,
+ 		   boot_cpu_data.dcache.linesz);
+-	seq_printf(m, "bogomips\t: %lu.%02lu\n",
++
++	seq_printf(m, "features\t:");
++	for (i = 0; i < ARRAY_SIZE(cpu_feature_flags); i++)
++		if (boot_cpu_data.features & (1 << i))
++			seq_printf(m, " %s", cpu_feature_flags[i]);
++
++	seq_printf(m, "\nbogomips\t: %lu.%02lu\n",
+ 		   boot_cpu_data.loops_per_jiffy / (500000/HZ),
+ 		   (boot_cpu_data.loops_per_jiffy / (5000/HZ)) % 100);
+ 
+@@ -343,7 +385,7 @@ static void c_stop(struct seq_file *m, void *v)
+ 
+ }
+ 
+-struct seq_operations cpuinfo_op = {
++const struct seq_operations cpuinfo_op = {
+ 	.start	= c_start,
+ 	.next	= c_next,
+ 	.stop	= c_stop,
 diff --git a/arch/avr32/kernel/dma-controller.c b/arch/avr32/kernel/dma-controller.c
 new file mode 100644
 index 0000000..fb654b3
@@ -2225,419 +6073,2795 @@ index 0000000..fb654b3
 +	return NULL;
 +}
 +EXPORT_SYMBOL(find_dma_controller);
-diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S
-index 42657f1..ccadfd9 100644
---- a/arch/avr32/kernel/entry-avr32b.S
-+++ b/arch/avr32/kernel/entry-avr32b.S
-@@ -159,11 +159,18 @@ handle_vmalloc_miss:
- 
- 	.section .scall.text,"ax",@progbits
- system_call:
-+#ifdef CONFIG_PREEMPT
-+	mask_interrupts
-+#endif
- 	pushm	r12		/* r12_orig */
- 	stmts	--sp, r0-lr
--	zero_fp
-+
- 	mfsr	r0, SYSREG_RAR_SUP
- 	mfsr	r1, SYSREG_RSR_SUP
-+#ifdef CONFIG_PREEMPT
-+	unmask_interrupts
-+#endif
-+	zero_fp
- 	stm	--sp, r0-r1
- 
- 	/* check for syscall tracing */
-@@ -638,6 +645,13 @@ irq_level\level:
- 	stmts	--sp,r0-lr
- 	mfsr	r8, rar_int\level
- 	mfsr	r9, rsr_int\level
-+
-+#ifdef CONFIG_PREEMPT
-+	sub	r11, pc, (. - system_call)
-+	cp.w	r11, r8
-+	breq	4f
-+#endif
+diff --git a/arch/avr32/kernel/irq.c b/arch/avr32/kernel/irq.c
+index 61f2de2..a8e767d 100644
+--- a/arch/avr32/kernel/irq.c
++++ b/arch/avr32/kernel/irq.c
+@@ -25,6 +25,17 @@ void ack_bad_irq(unsigned int irq)
+ 	printk("unexpected IRQ %u\n", irq);
+ }
+ 
++/* May be overridden by platform code */
++int __weak nmi_enable(void)
++{
++	return -ENOSYS;
++}
 +
- 	pushm	r8-r9
- 
- 	mov	r11, sp
-@@ -668,6 +682,16 @@ irq_level\level:
- 	sub	sp, -4		/* ignore r12_orig */
- 	rete
- 
-+#ifdef CONFIG_PREEMPT
-+4:	mask_interrupts
-+	mfsr	r8, rsr_int\level
-+	sbr	r8, 16
-+	mtsr	rsr_int\level, r8
-+	ldmts	sp++, r0-lr
-+	sub	sp, -4		/* ignore r12_orig */
-+	rete
-+#endif
++void __weak nmi_disable(void)
++{
 +
- 2:	get_thread_info	r0
- 	ld.w	r1, r0[TI_flags]
- 	bld	r1, TIF_CPU_GOING_TO_SLEEP
-diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
-index d08b0bc..4b4c188 100644
---- a/arch/avr32/kernel/setup.c
-+++ b/arch/avr32/kernel/setup.c
-@@ -248,7 +248,7 @@ static int __init early_parse_fbmem(char *p)
- 
- 	fbmem_size = memparse(p, &p);
- 	if (*p == '@') {
--		fbmem_start = memparse(p, &p);
-+		fbmem_start = memparse(p + 1, &p);
- 		ret = add_reserved_region(fbmem_start,
- 					  fbmem_start + fbmem_size - 1,
- 					  "Framebuffer");
-diff --git a/arch/avr32/kernel/vmlinux.lds.S b/arch/avr32/kernel/vmlinux.lds.S
++}
++
+ #ifdef CONFIG_PROC_FS
+ int show_interrupts(struct seq_file *p, void *v)
+ {
+diff --git a/arch/avr32/kernel/kprobes.c b/arch/avr32/kernel/kprobes.c
+index 799ba89..f820e9f 100644
+--- a/arch/avr32/kernel/kprobes.c
++++ b/arch/avr32/kernel/kprobes.c
+@@ -48,6 +48,7 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
+ void __kprobes arch_arm_kprobe(struct kprobe *p)
+ {
+ 	pr_debug("arming kprobe at %p\n", p->addr);
++	ocd_enable(NULL);
+ 	*p->addr = BREAKPOINT_INSTRUCTION;
+ 	flush_icache_range((unsigned long)p->addr,
+ 			   (unsigned long)p->addr + sizeof(kprobe_opcode_t));
+@@ -56,6 +57,7 @@ void __kprobes arch_arm_kprobe(struct kprobe *p)
+ void __kprobes arch_disarm_kprobe(struct kprobe *p)
+ {
+ 	pr_debug("disarming kprobe at %p\n", p->addr);
++	ocd_disable(NULL);
+ 	*p->addr = p->opcode;
+ 	flush_icache_range((unsigned long)p->addr,
+ 			   (unsigned long)p->addr + sizeof(kprobe_opcode_t));
+@@ -260,9 +262,6 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
+ 
+ int __init arch_init_kprobes(void)
+ {
+-	printk("KPROBES: Enabling monitor mode (MM|DBE)...\n");
+-	ocd_write(DC, (1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT));
+-
+ 	/* TODO: Register kretprobe trampoline */
+ 	return 0;
+ }
+diff --git a/arch/avr32/kernel/nmi_debug.c b/arch/avr32/kernel/nmi_debug.c
 new file mode 100644
-index 0000000..ce9ac96
+index 0000000..3414b85
 --- /dev/null
-+++ b/arch/avr32/kernel/vmlinux.lds.S
-@@ -0,0 +1,143 @@
++++ b/arch/avr32/kernel/nmi_debug.c
+@@ -0,0 +1,82 @@
 +/*
-+ * AVR32 linker script for the Linux kernel
-+ *
-+ * Copyright (C) 2004-2006 Atmel Corporation
++ * Copyright (C) 2007 Atmel Corporation
 + *
 + * This program is free software; you can redistribute it and/or modify
 + * it under the terms of the GNU General Public License version 2 as
 + * published by the Free Software Foundation.
 + */
-+#define LOAD_OFFSET 0x00000000
-+#include <asm-generic/vmlinux.lds.h>
-+#include <asm/cache.h>
-+#include <asm/thread_info.h>
-+
-+OUTPUT_FORMAT("elf32-avr32", "elf32-avr32", "elf32-avr32")
-+OUTPUT_ARCH(avr32)
-+ENTRY(_start)
-+
-+/* Big endian */
-+jiffies = jiffies_64 + 4;
-+
-+SECTIONS
-+{
-+	. = CONFIG_ENTRY_ADDRESS;
-+	.init		: AT(ADDR(.init) - LOAD_OFFSET) {
-+		_stext = .;
-+		__init_begin = .;
-+			_sinittext = .;
-+			*(.text.reset)
-+			*(.init.text)
-+			/*
-+			 * .exit.text is discarded at runtime, not
-+			 * link time, to deal with references from
-+			 * __bug_table
-+			 */
-+			*(.exit.text)
-+			_einittext = .;
-+		. = ALIGN(4);
-+		__tagtable_begin = .;
-+			*(.taglist.init)
-+		__tagtable_end = .;
-+			*(.init.data)
-+		. = ALIGN(16);
-+		__setup_start = .;
-+			*(.init.setup)
-+		__setup_end = .;
-+		. = ALIGN(4);
-+		__initcall_start = .;
-+			INITCALLS
-+		__initcall_end = .;
-+		__con_initcall_start = .;
-+			*(.con_initcall.init)
-+		__con_initcall_end = .;
-+		__security_initcall_start = .;
-+			*(.security_initcall.init)
-+		__security_initcall_end = .;
-+#ifdef CONFIG_BLK_DEV_INITRD
-+		. = ALIGN(32);
-+		__initramfs_start = .;
-+			*(.init.ramfs)
-+		__initramfs_end = .;
-+#endif
-+		. = ALIGN(PAGE_SIZE);
-+		__init_end = .;
-+	}
-+
-+	.text		: AT(ADDR(.text) - LOAD_OFFSET) {
-+		_evba = .;
-+		_text = .;
-+		*(.ex.text)
-+		. = 0x50;
-+		*(.tlbx.ex.text)
-+		. = 0x60;
-+		*(.tlbr.ex.text)
-+		. = 0x70;
-+		*(.tlbw.ex.text)
-+		. = 0x100;
-+		*(.scall.text)
-+		*(.irq.text)
-+		TEXT_TEXT
-+		SCHED_TEXT
-+		LOCK_TEXT
-+		KPROBES_TEXT
-+		*(.fixup)
-+		*(.gnu.warning)
-+		_etext = .;
-+	} = 0xd703d703
-+
-+	. = ALIGN(4);
-+	__ex_table	: AT(ADDR(__ex_table) - LOAD_OFFSET) {
-+		__start___ex_table = .;
-+		*(__ex_table)
-+		__stop___ex_table = .;
-+	}
-+
-+	BUG_TABLE
-+
-+	RODATA
-+
-+	. = ALIGN(THREAD_SIZE);
-+
-+	.data		: AT(ADDR(.data) - LOAD_OFFSET) {
-+		_data = .;
-+		_sdata = .;
-+		/*
-+		 * First, the init task union, aligned to an 8K boundary.
-+		 */
-+		*(.data.init_task)
++#include <linux/delay.h>
++#include <linux/kdebug.h>
++#include <linux/notifier.h>
++#include <linux/sched.h>
++
++#include <asm/irq.h>
++
++enum nmi_action {
++	NMI_SHOW_STATE	= 1 << 0,
++	NMI_SHOW_REGS	= 1 << 1,
++	NMI_DIE		= 1 << 2,
++	NMI_DEBOUNCE	= 1 << 3,
++};
++
++static unsigned long nmi_actions;
++
++static int nmi_debug_notify(struct notifier_block *self,
++		unsigned long val, void *data)
++{
++	struct die_args *args = data;
++
++	if (likely(val != DIE_NMI))
++		return NOTIFY_DONE;
++
++	if (nmi_actions & NMI_SHOW_STATE)
++		show_state();
++	if (nmi_actions & NMI_SHOW_REGS)
++		show_regs(args->regs);
++	if (nmi_actions & NMI_DEBOUNCE)
++		mdelay(10);
++	if (nmi_actions & NMI_DIE)
++		return NOTIFY_BAD;
 +
-+		/* Then, the cacheline aligned data */
-+		. = ALIGN(L1_CACHE_BYTES);
-+		*(.data.cacheline_aligned)
++	return NOTIFY_OK;
++}
 +
-+		/* And the rest... */
-+		*(.data.rel*)
-+		DATA_DATA
-+		CONSTRUCTORS
++static struct notifier_block nmi_debug_nb = {
++	.notifier_call = nmi_debug_notify,
++};
 +
-+		_edata = .;
++static int __init nmi_debug_setup(char *str)
++{
++	char *p, *sep;
++
++	register_die_notifier(&nmi_debug_nb);
++	if (nmi_enable()) {
++		printk(KERN_WARNING "Unable to enable NMI.\n");
++		return 0;
 +	}
 +
++	if (*str != '=')
++		return 0;
 +
-+	. = ALIGN(8);
-+	.bss    	: AT(ADDR(.bss) - LOAD_OFFSET) {
-+		__bss_start = .;
-+		*(.bss)
-+		*(COMMON)
-+		. = ALIGN(8);
-+		__bss_stop = .;
-+		_end = .;
++	for (p = str + 1; *p; p = sep + 1) {
++		sep = strchr(p, ',');
++		if (sep)
++			*sep = 0;
++		if (strcmp(p, "state") == 0)
++			nmi_actions |= NMI_SHOW_STATE;
++		else if (strcmp(p, "regs") == 0)
++			nmi_actions |= NMI_SHOW_REGS;
++		else if (strcmp(p, "debounce") == 0)
++			nmi_actions |= NMI_DEBOUNCE;
++		else if (strcmp(p, "die") == 0)
++			nmi_actions |= NMI_DIE;
++		else
++			printk(KERN_WARNING "NMI: Unrecognized action `%s'\n",
++				p);
++		if (!sep)
++			break;
 +	}
 +
-+	/* When something in the kernel is NOT compiled as a module, the module
-+	 * cleanup code and data are put into these segments. Both can then be
-+	 * thrown away, as cleanup code is never called unless it's a module.
-+	 */
-+	/DISCARD/       	: {
-+		*(.exit.data)
-+		*(.exitcall.exit)
++	return 0;
++}
++__setup("nmi_debug", nmi_debug_setup);
+diff --git a/arch/avr32/kernel/ocd.c b/arch/avr32/kernel/ocd.c
+new file mode 100644
+index 0000000..c4f0232
+--- /dev/null
++++ b/arch/avr32/kernel/ocd.c
+@@ -0,0 +1,163 @@
++/*
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/init.h>
++#include <linux/sched.h>
++#include <linux/spinlock.h>
++
++#include <asm/ocd.h>
++
++static long ocd_count;
++static spinlock_t ocd_lock;
++
++/**
++ * ocd_enable - enable on-chip debugging
++ * @child: task to be debugged
++ *
++ * If @child is non-NULL, ocd_enable() first checks if debugging has
++ * already been enabled for @child, and if it has, does nothing.
++ *
++ * If @child is NULL (e.g. when debugging the kernel), or debugging
++ * has not already been enabled for it, ocd_enable() increments the
++ * reference count and enables the debugging hardware.
++ */
++void ocd_enable(struct task_struct *child)
++{
++	u32 dc;
++
++	if (child)
++		pr_debug("ocd_enable: child=%s [%u]\n",
++				child->comm, child->pid);
++	else
++		pr_debug("ocd_enable (no child)\n");
++
++	if (!child || !test_and_set_tsk_thread_flag(child, TIF_DEBUG)) {
++		spin_lock(&ocd_lock);
++		ocd_count++;
++		dc = ocd_read(DC);
++		dc |= (1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT);
++		ocd_write(DC, dc);
++		spin_unlock(&ocd_lock);
++	}
++}
++
++/**
++ * ocd_disable - disable on-chip debugging
++ * @child: task that was being debugged, but isn't anymore
++ *
++ * If @child is non-NULL, ocd_disable() checks if debugging is enabled
++ * for @child, and if it isn't, does nothing.
++ *
++ * If @child is NULL (e.g. when debugging the kernel), or debugging is
++ * enabled, ocd_disable() decrements the reference count, and if it
++ * reaches zero, disables the debugging hardware.
++ */
++void ocd_disable(struct task_struct *child)
++{
++	u32 dc;
++
++	if (!child)
++		pr_debug("ocd_disable (no child)\n");
++	else if (test_tsk_thread_flag(child, TIF_DEBUG))
++		pr_debug("ocd_disable: child=%s [%u]\n",
++				child->comm, child->pid);
++
++	if (!child || test_and_clear_tsk_thread_flag(child, TIF_DEBUG)) {
++		spin_lock(&ocd_lock);
++		ocd_count--;
++
++		WARN_ON(ocd_count < 0);
++
++		if (ocd_count <= 0) {
++			dc = ocd_read(DC);
++			dc &= ~((1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT));
++			ocd_write(DC, dc);
++		}
++		spin_unlock(&ocd_lock);
 +	}
++}
++
++#ifdef CONFIG_DEBUG_FS
++#include <linux/debugfs.h>
++#include <linux/module.h>
++
++static struct dentry *ocd_debugfs_root;
++static struct dentry *ocd_debugfs_DC;
++static struct dentry *ocd_debugfs_DS;
++static struct dentry *ocd_debugfs_count;
++
++static u64 ocd_DC_get(void *data)
++{
++	return ocd_read(DC);
++}
++static void ocd_DC_set(void *data, u64 val)
++{
++	ocd_write(DC, val);
++}
++DEFINE_SIMPLE_ATTRIBUTE(fops_DC, ocd_DC_get, ocd_DC_set, "0x%08llx\n");
++
++static u64 ocd_DS_get(void *data)
++{
++	return ocd_read(DS);
++}
++DEFINE_SIMPLE_ATTRIBUTE(fops_DS, ocd_DS_get, NULL, "0x%08llx\n");
 +
-+	DWARF_DEBUG
++static u64 ocd_count_get(void *data)
++{
++	return ocd_count;
 +}
-diff --git a/arch/avr32/kernel/vmlinux.lds.c b/arch/avr32/kernel/vmlinux.lds.c
++DEFINE_SIMPLE_ATTRIBUTE(fops_count, ocd_count_get, NULL, "%lld\n");
++
++static void ocd_debugfs_init(void)
++{
++	struct dentry *root;
++
++	root = debugfs_create_dir("ocd", NULL);
++	if (IS_ERR(root) || !root)
++		goto err_root;
++	ocd_debugfs_root = root;
++
++	ocd_debugfs_DC = debugfs_create_file("DC", S_IRUSR | S_IWUSR,
++				root, NULL, &fops_DC);
++	if (!ocd_debugfs_DC)
++		goto err_DC;
++
++	ocd_debugfs_DS = debugfs_create_file("DS", S_IRUSR, root,
++				NULL, &fops_DS);
++	if (!ocd_debugfs_DS)
++		goto err_DS;
++
++	ocd_debugfs_count = debugfs_create_file("count", S_IRUSR, root,
++				NULL, &fops_count);
++	if (!ocd_debugfs_count)
++		goto err_count;
++
++	return;
++
++err_count:
++	debugfs_remove(ocd_debugfs_DS);
++err_DS:
++	debugfs_remove(ocd_debugfs_DC);
++err_DC:
++	debugfs_remove(ocd_debugfs_root);
++err_root:
++	printk(KERN_WARNING "OCD: Failed to create debugfs entries\n");
++}
++#else
++static inline void ocd_debugfs_init(void)
++{
++
++}
++#endif
++
++static int __init ocd_init(void)
++{
++	spin_lock_init(&ocd_lock);
++	ocd_debugfs_init();
++	return 0;
++}
++arch_initcall(ocd_init);
+diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
+index 9d6dac8..eaaa69b 100644
+--- a/arch/avr32/kernel/process.c
++++ b/arch/avr32/kernel/process.c
+@@ -103,7 +103,7 @@ EXPORT_SYMBOL(kernel_thread);
+  */
+ void exit_thread(void)
+ {
+-	/* nothing to do */
++	ocd_disable(current);
+ }
+ 
+ void flush_thread(void)
+@@ -345,6 +345,9 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
+ 	p->thread.cpu_context.ksp = (unsigned long)childregs;
+ 	p->thread.cpu_context.pc = (unsigned long)ret_from_fork;
+ 
++	if ((clone_flags & CLONE_PTRACE) && test_thread_flag(TIF_DEBUG))
++		ocd_enable(p);
++
+ 	return 0;
+ }
+ 
+diff --git a/arch/avr32/kernel/ptrace.c b/arch/avr32/kernel/ptrace.c
+index 002369e..1fed38f 100644
+--- a/arch/avr32/kernel/ptrace.c
++++ b/arch/avr32/kernel/ptrace.c
+@@ -58,6 +58,7 @@ void ptrace_disable(struct task_struct *child)
+ {
+ 	clear_tsk_thread_flag(child, TIF_SINGLE_STEP);
+ 	clear_tsk_thread_flag(child, TIF_BREAKPOINT);
++	ocd_disable(child);
+ }
+ 
+ /*
+@@ -144,10 +145,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
+ {
+ 	int ret;
+ 
+-	pr_debug("ptrace: Enabling monitor mode...\n");
+-	ocd_write(DC, ocd_read(DC) | (1 << OCD_DC_MM_BIT)
+-			| (1 << OCD_DC_DBE_BIT));
+-
+ 	switch (request) {
+ 	/* Read the word at location addr in the child process */
+ 	case PTRACE_PEEKTEXT:
+diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
+index 4b4c188..488078d 100644
+--- a/arch/avr32/kernel/setup.c
++++ b/arch/avr32/kernel/setup.c
+@@ -273,6 +273,8 @@ static int __init early_parse_fbmem(char *p)
+ 			printk(KERN_WARNING
+ 			       "Failed to allocate framebuffer memory\n");
+ 			fbmem_size = 0;
++		} else {
++			memset(__va(fbmem_start), 0, fbmem_size);
+ 		}
+ 	}
+ 
+diff --git a/arch/avr32/kernel/signal.c b/arch/avr32/kernel/signal.c
+index 0ec1485..5616a00 100644
+--- a/arch/avr32/kernel/signal.c
++++ b/arch/avr32/kernel/signal.c
+@@ -270,19 +270,12 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset, int syscall)
+ 	if (!user_mode(regs))
+ 		return 0;
+ 
+-	if (try_to_freeze()) {
+-		signr = 0;
+-		if (!signal_pending(current))
+-			goto no_signal;
+-	}
+-
+ 	if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ 		oldset = &current->saved_sigmask;
+ 	else if (!oldset)
+ 		oldset = &current->blocked;
+ 
+ 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+-no_signal:
+ 	if (syscall) {
+ 		switch (regs->r12) {
+ 		case -ERESTART_RESTARTBLOCK:
+diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c
+index 870c075..cf6f686 100644
+--- a/arch/avr32/kernel/traps.c
++++ b/arch/avr32/kernel/traps.c
+@@ -9,6 +9,7 @@
+ #include <linux/bug.h>
+ #include <linux/init.h>
+ #include <linux/kallsyms.h>
++#include <linux/kdebug.h>
+ #include <linux/module.h>
+ #include <linux/notifier.h>
+ #include <linux/sched.h>
+@@ -107,9 +108,23 @@ void _exception(long signr, struct pt_regs *regs, int code,
+ 
+ asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs)
+ {
+-	printk(KERN_ALERT "Got Non-Maskable Interrupt, dumping regs\n");
+-	show_regs_log_lvl(regs, KERN_ALERT);
+-	show_stack_log_lvl(current, regs->sp, regs, KERN_ALERT);
++	int ret;
++
++	nmi_enter();
++
++	ret = notify_die(DIE_NMI, "NMI", regs, 0, ecr, SIGINT);
++	switch (ret) {
++	case NOTIFY_OK:
++	case NOTIFY_STOP:
++		return;
++	case NOTIFY_BAD:
++		die("Fatal Non-Maskable Interrupt", regs, SIGINT);
++	default:
++		break;
++	}
++
++	printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n");
++	nmi_disable();
+ }
+ 
+ asmlinkage void do_critical_exception(unsigned long ecr, struct pt_regs *regs)
+diff --git a/arch/avr32/mach-at32ap/Kconfig b/arch/avr32/mach-at32ap/Kconfig
+index eb30783..0eb590a 100644
+--- a/arch/avr32/mach-at32ap/Kconfig
++++ b/arch/avr32/mach-at32ap/Kconfig
+@@ -3,9 +3,9 @@ if PLATFORM_AT32AP
+ menu "Atmel AVR32 AP options"
+ 
+ choice
+-	prompt "AT32AP7000 static memory bus width"
+-	depends on CPU_AT32AP7000
+-	default AP7000_16_BIT_SMC
++	prompt "AT32AP700x static memory bus width"
++	depends on CPU_AT32AP700X
++	default AP700X_16_BIT_SMC
+ 	help
+ 	  Define the width of the AP7000 external static memory interface.
+ 	  This is used to determine how to mangle the address and/or data
+@@ -15,17 +15,24 @@ choice
+ 	  width for all chip selects, excluding the flash (which is using
+ 	  raw access and is thus not affected by any of this.)
+ 
+-config AP7000_32_BIT_SMC
++config AP700X_32_BIT_SMC
+ 	bool "32 bit"
+ 
+-config AP7000_16_BIT_SMC
++config AP700X_16_BIT_SMC
+ 	bool "16 bit"
+ 
+-config AP7000_8_BIT_SMC
++config AP700X_8_BIT_SMC
+ 	bool "8 bit"
+ 
+ endchoice
+ 
++config GPIO_DEV
++	bool "GPIO /dev interface"
++	select CONFIGFS_FS
++	default n
++	help
++	  Say `Y' to enable a /dev interface to the GPIO pins.
++
+ endmenu
+ 
+ endif # PLATFORM_AT32AP
+diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
+index a8b4450..0f6162e 100644
+--- a/arch/avr32/mach-at32ap/Makefile
++++ b/arch/avr32/mach-at32ap/Makefile
+@@ -1,4 +1,5 @@
+ obj-y				+= at32ap.o clock.o intc.o extint.o pio.o hsmc.o
+-obj-$(CONFIG_CPU_AT32AP7000)	+= at32ap7000.o
+-obj-$(CONFIG_CPU_AT32AP7000)	+= time-tc.o
++obj-$(CONFIG_CPU_AT32AP700X)	+= at32ap700x.o
++obj-$(CONFIG_CPU_AT32AP700X)	+= time-tc.o
+ obj-$(CONFIG_CPU_FREQ_AT32AP)	+= cpufreq.o
++obj-$(CONFIG_GPIO_DEV)		+= gpio-dev.o
+diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c
 deleted file mode 100644
-index db0438f..0000000
---- a/arch/avr32/kernel/vmlinux.lds.c
+index 7c4388f..0000000
+--- a/arch/avr32/mach-at32ap/at32ap7000.c
 +++ /dev/null
-@@ -1,142 +0,0 @@
+@@ -1,1730 +0,0 @@
 -/*
-- * AVR32 linker script for the Linux kernel
-- *
-- * Copyright (C) 2004-2006 Atmel Corporation
+- * Copyright (C) 2005-2006 Atmel Corporation
 - *
 - * This program is free software; you can redistribute it and/or modify
 - * it under the terms of the GNU General Public License version 2 as
 - * published by the Free Software Foundation.
 - */
--#define LOAD_OFFSET 0x00000000
--#include <asm-generic/vmlinux.lds.h>
+-#include <linux/clk.h>
+-#include <linux/fb.h>
+-#include <linux/init.h>
+-#include <linux/platform_device.h>
+-#include <linux/dma-mapping.h>
+-#include <linux/spi/spi.h>
+-
+-#include <asm/io.h>
 -
--OUTPUT_FORMAT("elf32-avr32", "elf32-avr32", "elf32-avr32")
--OUTPUT_ARCH(avr32)
--ENTRY(_start)
+-#include <asm/arch/at32ap7000.h>
+-#include <asm/arch/board.h>
+-#include <asm/arch/portmux.h>
 -
--/* Big endian */
--jiffies = jiffies_64 + 4;
+-#include <video/atmel_lcdc.h>
 -
--SECTIONS
+-#include "clock.h"
+-#include "hmatrix.h"
+-#include "pio.h"
+-#include "pm.h"
+-
+-
+-#define PBMEM(base)					\
+-	{						\
+-		.start		= base,			\
+-		.end		= base + 0x3ff,		\
+-		.flags		= IORESOURCE_MEM,	\
+-	}
+-#define IRQ(num)					\
+-	{						\
+-		.start		= num,			\
+-		.end		= num,			\
+-		.flags		= IORESOURCE_IRQ,	\
+-	}
+-#define NAMED_IRQ(num, _name)				\
+-	{						\
+-		.start		= num,			\
+-		.end		= num,			\
+-		.name		= _name,		\
+-		.flags		= IORESOURCE_IRQ,	\
+-	}
+-
+-/* REVISIT these assume *every* device supports DMA, but several
+- * don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more.
+- */
+-#define DEFINE_DEV(_name, _id)					\
+-static u64 _name##_id##_dma_mask = DMA_32BIT_MASK;		\
+-static struct platform_device _name##_id##_device = {		\
+-	.name		= #_name,				\
+-	.id		= _id,					\
+-	.dev		= {					\
+-		.dma_mask = &_name##_id##_dma_mask,		\
+-		.coherent_dma_mask = DMA_32BIT_MASK,		\
+-	},							\
+-	.resource	= _name##_id##_resource,		\
+-	.num_resources	= ARRAY_SIZE(_name##_id##_resource),	\
+-}
+-#define DEFINE_DEV_DATA(_name, _id)				\
+-static u64 _name##_id##_dma_mask = DMA_32BIT_MASK;		\
+-static struct platform_device _name##_id##_device = {		\
+-	.name		= #_name,				\
+-	.id		= _id,					\
+-	.dev		= {					\
+-		.dma_mask = &_name##_id##_dma_mask,		\
+-		.platform_data	= &_name##_id##_data,		\
+-		.coherent_dma_mask = DMA_32BIT_MASK,		\
+-	},							\
+-	.resource	= _name##_id##_resource,		\
+-	.num_resources	= ARRAY_SIZE(_name##_id##_resource),	\
+-}
+-
+-#define select_peripheral(pin, periph, flags)			\
+-	at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
+-
+-#define DEV_CLK(_name, devname, bus, _index)			\
+-static struct clk devname##_##_name = {				\
+-	.name		= #_name,				\
+-	.dev		= &devname##_device.dev,		\
+-	.parent		= &bus##_clk,				\
+-	.mode		= bus##_clk_mode,			\
+-	.get_rate	= bus##_clk_get_rate,			\
+-	.index		= _index,				\
+-}
+-
+-static DEFINE_SPINLOCK(pm_lock);
+-
+-unsigned long at32ap7000_osc_rates[3] = {
+-	[0] = 32768,
+-	/* FIXME: these are ATSTK1002-specific */
+-	[1] = 20000000,
+-	[2] = 12000000,
+-};
+-
+-static unsigned long osc_get_rate(struct clk *clk)
 -{
--	. = CONFIG_ENTRY_ADDRESS;
--	.init		: AT(ADDR(.init) - LOAD_OFFSET) {
--		_stext = .;
--		__init_begin = .;
--			_sinittext = .;
--			*(.text.reset)
--			*(.init.text)
--			/*
--			 * .exit.text is discarded at runtime, not
--			 * link time, to deal with references from
--			 * __bug_table
--			 */
--			*(.exit.text)
--			_einittext = .;
--		. = ALIGN(4);
--		__tagtable_begin = .;
--			*(.taglist.init)
--		__tagtable_end = .;
--			*(.init.data)
--		. = ALIGN(16);
--		__setup_start = .;
--			*(.init.setup)
--		__setup_end = .;
--		. = ALIGN(4);
--		__initcall_start = .;
--			INITCALLS
--		__initcall_end = .;
--		__con_initcall_start = .;
--			*(.con_initcall.init)
--		__con_initcall_end = .;
--		__security_initcall_start = .;
--			*(.security_initcall.init)
--		__security_initcall_end = .;
--#ifdef CONFIG_BLK_DEV_INITRD
--		. = ALIGN(32);
--		__initramfs_start = .;
--			*(.init.ramfs)
--		__initramfs_end = .;
--#endif
--		. = ALIGN(4096);
--		__init_end = .;
+-	return at32ap7000_osc_rates[clk->index];
+-}
+-
+-static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
+-{
+-	unsigned long div, mul, rate;
+-
+-	if (!(control & PM_BIT(PLLEN)))
+-		return 0;
+-
+-	div = PM_BFEXT(PLLDIV, control) + 1;
+-	mul = PM_BFEXT(PLLMUL, control) + 1;
+-
+-	rate = clk->parent->get_rate(clk->parent);
+-	rate = (rate + div / 2) / div;
+-	rate *= mul;
+-
+-	return rate;
+-}
+-
+-static unsigned long pll0_get_rate(struct clk *clk)
+-{
+-	u32 control;
+-
+-	control = pm_readl(PLL0);
+-
+-	return pll_get_rate(clk, control);
+-}
+-
+-static unsigned long pll1_get_rate(struct clk *clk)
+-{
+-	u32 control;
+-
+-	control = pm_readl(PLL1);
+-
+-	return pll_get_rate(clk, control);
+-}
+-
+-/*
+- * The AT32AP7000 has five primary clock sources: One 32kHz
+- * oscillator, two crystal oscillators and two PLLs.
+- */
+-static struct clk osc32k = {
+-	.name		= "osc32k",
+-	.get_rate	= osc_get_rate,
+-	.users		= 1,
+-	.index		= 0,
+-};
+-static struct clk osc0 = {
+-	.name		= "osc0",
+-	.get_rate	= osc_get_rate,
+-	.users		= 1,
+-	.index		= 1,
+-};
+-static struct clk osc1 = {
+-	.name		= "osc1",
+-	.get_rate	= osc_get_rate,
+-	.index		= 2,
+-};
+-static struct clk pll0 = {
+-	.name		= "pll0",
+-	.get_rate	= pll0_get_rate,
+-	.parent		= &osc0,
+-};
+-static struct clk pll1 = {
+-	.name		= "pll1",
+-	.get_rate	= pll1_get_rate,
+-	.parent		= &osc0,
+-};
+-
+-/*
+- * The main clock can be either osc0 or pll0.  The boot loader may
+- * have chosen one for us, so we don't really know which one until we
+- * have a look at the SM.
+- */
+-static struct clk *main_clock;
+-
+-/*
+- * Synchronous clocks are generated from the main clock. The clocks
+- * must satisfy the constraint
+- *   fCPU >= fHSB >= fPB
+- * i.e. each clock must not be faster than its parent.
+- */
+-static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
+-{
+-	return main_clock->get_rate(main_clock) >> shift;
+-};
+-
+-static void cpu_clk_mode(struct clk *clk, int enabled)
+-{
+-	unsigned long flags;
+-	u32 mask;
+-
+-	spin_lock_irqsave(&pm_lock, flags);
+-	mask = pm_readl(CPU_MASK);
+-	if (enabled)
+-		mask |= 1 << clk->index;
+-	else
+-		mask &= ~(1 << clk->index);
+-	pm_writel(CPU_MASK, mask);
+-	spin_unlock_irqrestore(&pm_lock, flags);
+-}
+-
+-static unsigned long cpu_clk_get_rate(struct clk *clk)
+-{
+-	unsigned long cksel, shift = 0;
+-
+-	cksel = pm_readl(CKSEL);
+-	if (cksel & PM_BIT(CPUDIV))
+-		shift = PM_BFEXT(CPUSEL, cksel) + 1;
+-
+-	return bus_clk_get_rate(clk, shift);
+-}
+-
+-static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
+-{
+-	u32 control;
+-	unsigned long parent_rate, child_div, actual_rate, div;
+-
+-	parent_rate = clk->parent->get_rate(clk->parent);
+-	control = pm_readl(CKSEL);
+-
+-	if (control & PM_BIT(HSBDIV))
+-		child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
+-	else
+-		child_div = 1;
+-
+-	if (rate > 3 * (parent_rate / 4) || child_div == 1) {
+-		actual_rate = parent_rate;
+-		control &= ~PM_BIT(CPUDIV);
+-	} else {
+-		unsigned int cpusel;
+-		div = (parent_rate + rate / 2) / rate;
+-		if (div > child_div)
+-			div = child_div;
+-		cpusel = (div > 1) ? (fls(div) - 2) : 0;
+-		control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
+-		actual_rate = parent_rate / (1 << (cpusel + 1));
 -	}
 -
--	. = ALIGN(8192);
--	.text		: AT(ADDR(.text) - LOAD_OFFSET) {
--		_evba = .;
--		_text = .;
--		*(.ex.text)
--		. = 0x50;
--		*(.tlbx.ex.text)
--		. = 0x60;
--		*(.tlbr.ex.text)
--		. = 0x70;
--		*(.tlbw.ex.text)
--		. = 0x100;
--		*(.scall.text)
--		*(.irq.text)
--		TEXT_TEXT
--		SCHED_TEXT
--		LOCK_TEXT
--		KPROBES_TEXT
--		*(.fixup)
--		*(.gnu.warning)
--		_etext = .;
--	} = 0xd703d703
--
--	. = ALIGN(4);
--	__ex_table	: AT(ADDR(__ex_table) - LOAD_OFFSET) {
--		__start___ex_table = .;
--		*(__ex_table)
--		__stop___ex_table = .;
+-	pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
+-			clk->name, rate, actual_rate);
+-
+-	if (apply)
+-		pm_writel(CKSEL, control);
+-
+-	return actual_rate;
+-}
+-
+-static void hsb_clk_mode(struct clk *clk, int enabled)
+-{
+-	unsigned long flags;
+-	u32 mask;
+-
+-	spin_lock_irqsave(&pm_lock, flags);
+-	mask = pm_readl(HSB_MASK);
+-	if (enabled)
+-		mask |= 1 << clk->index;
+-	else
+-		mask &= ~(1 << clk->index);
+-	pm_writel(HSB_MASK, mask);
+-	spin_unlock_irqrestore(&pm_lock, flags);
+-}
+-
+-static unsigned long hsb_clk_get_rate(struct clk *clk)
+-{
+-	unsigned long cksel, shift = 0;
+-
+-	cksel = pm_readl(CKSEL);
+-	if (cksel & PM_BIT(HSBDIV))
+-		shift = PM_BFEXT(HSBSEL, cksel) + 1;
+-
+-	return bus_clk_get_rate(clk, shift);
+-}
+-
+-static void pba_clk_mode(struct clk *clk, int enabled)
+-{
+-	unsigned long flags;
+-	u32 mask;
+-
+-	spin_lock_irqsave(&pm_lock, flags);
+-	mask = pm_readl(PBA_MASK);
+-	if (enabled)
+-		mask |= 1 << clk->index;
+-	else
+-		mask &= ~(1 << clk->index);
+-	pm_writel(PBA_MASK, mask);
+-	spin_unlock_irqrestore(&pm_lock, flags);
+-}
+-
+-static unsigned long pba_clk_get_rate(struct clk *clk)
+-{
+-	unsigned long cksel, shift = 0;
+-
+-	cksel = pm_readl(CKSEL);
+-	if (cksel & PM_BIT(PBADIV))
+-		shift = PM_BFEXT(PBASEL, cksel) + 1;
+-
+-	return bus_clk_get_rate(clk, shift);
+-}
+-
+-static void pbb_clk_mode(struct clk *clk, int enabled)
+-{
+-	unsigned long flags;
+-	u32 mask;
+-
+-	spin_lock_irqsave(&pm_lock, flags);
+-	mask = pm_readl(PBB_MASK);
+-	if (enabled)
+-		mask |= 1 << clk->index;
+-	else
+-		mask &= ~(1 << clk->index);
+-	pm_writel(PBB_MASK, mask);
+-	spin_unlock_irqrestore(&pm_lock, flags);
+-}
+-
+-static unsigned long pbb_clk_get_rate(struct clk *clk)
+-{
+-	unsigned long cksel, shift = 0;
+-
+-	cksel = pm_readl(CKSEL);
+-	if (cksel & PM_BIT(PBBDIV))
+-		shift = PM_BFEXT(PBBSEL, cksel) + 1;
+-
+-	return bus_clk_get_rate(clk, shift);
+-}
+-
+-static struct clk cpu_clk = {
+-	.name		= "cpu",
+-	.get_rate	= cpu_clk_get_rate,
+-	.set_rate	= cpu_clk_set_rate,
+-	.users		= 1,
+-};
+-static struct clk hsb_clk = {
+-	.name		= "hsb",
+-	.parent		= &cpu_clk,
+-	.get_rate	= hsb_clk_get_rate,
+-};
+-static struct clk pba_clk = {
+-	.name		= "pba",
+-	.parent		= &hsb_clk,
+-	.mode		= hsb_clk_mode,
+-	.get_rate	= pba_clk_get_rate,
+-	.index		= 1,
+-};
+-static struct clk pbb_clk = {
+-	.name		= "pbb",
+-	.parent		= &hsb_clk,
+-	.mode		= hsb_clk_mode,
+-	.get_rate	= pbb_clk_get_rate,
+-	.users		= 1,
+-	.index		= 2,
+-};
+-
+-/* --------------------------------------------------------------------
+- *  Generic Clock operations
+- * -------------------------------------------------------------------- */
+-
+-static void genclk_mode(struct clk *clk, int enabled)
+-{
+-	u32 control;
+-
+-	control = pm_readl(GCCTRL(clk->index));
+-	if (enabled)
+-		control |= PM_BIT(CEN);
+-	else
+-		control &= ~PM_BIT(CEN);
+-	pm_writel(GCCTRL(clk->index), control);
+-}
+-
+-static unsigned long genclk_get_rate(struct clk *clk)
+-{
+-	u32 control;
+-	unsigned long div = 1;
+-
+-	control = pm_readl(GCCTRL(clk->index));
+-	if (control & PM_BIT(DIVEN))
+-		div = 2 * (PM_BFEXT(DIV, control) + 1);
+-
+-	return clk->parent->get_rate(clk->parent) / div;
+-}
+-
+-static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
+-{
+-	u32 control;
+-	unsigned long parent_rate, actual_rate, div;
+-
+-	parent_rate = clk->parent->get_rate(clk->parent);
+-	control = pm_readl(GCCTRL(clk->index));
+-
+-	if (rate > 3 * parent_rate / 4) {
+-		actual_rate = parent_rate;
+-		control &= ~PM_BIT(DIVEN);
+-	} else {
+-		div = (parent_rate + rate) / (2 * rate) - 1;
+-		control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
+-		actual_rate = parent_rate / (2 * (div + 1));
 -	}
 -
--	BUG_TABLE
+-	dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
+-		clk->name, rate, actual_rate);
 -
--	RODATA
+-	if (apply)
+-		pm_writel(GCCTRL(clk->index), control);
 -
--	. = ALIGN(8192);
+-	return actual_rate;
+-}
 -
--	.data		: AT(ADDR(.data) - LOAD_OFFSET) {
--		_data = .;
--		_sdata = .;
--		/*
--		 * First, the init task union, aligned to an 8K boundary.
--		 */
--		*(.data.init_task)
+-int genclk_set_parent(struct clk *clk, struct clk *parent)
+-{
+-	u32 control;
 -
--		/* Then, the cacheline aligned data */
--		. = ALIGN(32);
--		*(.data.cacheline_aligned)
+-	dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
+-		clk->name, parent->name, clk->parent->name);
 -
--		/* And the rest... */
--		*(.data.rel*)
--		DATA_DATA
--		CONSTRUCTORS
+-	control = pm_readl(GCCTRL(clk->index));
+-
+-	if (parent == &osc1 || parent == &pll1)
+-		control |= PM_BIT(OSCSEL);
+-	else if (parent == &osc0 || parent == &pll0)
+-		control &= ~PM_BIT(OSCSEL);
+-	else
+-		return -EINVAL;
+-
+-	if (parent == &pll0 || parent == &pll1)
+-		control |= PM_BIT(PLLSEL);
+-	else
+-		control &= ~PM_BIT(PLLSEL);
+-
+-	pm_writel(GCCTRL(clk->index), control);
+-	clk->parent = parent;
+-
+-	return 0;
+-}
 -
--		_edata = .;
+-static void __init genclk_init_parent(struct clk *clk)
+-{
+-	u32 control;
+-	struct clk *parent;
+-
+-	BUG_ON(clk->index > 7);
+-
+-	control = pm_readl(GCCTRL(clk->index));
+-	if (control & PM_BIT(OSCSEL))
+-		parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
+-	else
+-		parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
+-
+-	clk->parent = parent;
+-}
+-
+-/* --------------------------------------------------------------------
+- *  System peripherals
+- * -------------------------------------------------------------------- */
+-static struct resource at32_pm0_resource[] = {
+-	{
+-		.start	= 0xfff00000,
+-		.end	= 0xfff0007f,
+-		.flags	= IORESOURCE_MEM,
+-	},
+-	IRQ(20),
+-};
+-
+-static struct resource at32ap700x_rtc0_resource[] = {
+-	{
+-		.start	= 0xfff00080,
+-		.end	= 0xfff000af,
+-		.flags	= IORESOURCE_MEM,
+-	},
+-	IRQ(21),
+-};
+-
+-static struct resource at32_wdt0_resource[] = {
+-	{
+-		.start	= 0xfff000b0,
+-		.end	= 0xfff000cf,
+-		.flags	= IORESOURCE_MEM,
+-	},
+-};
+-
+-static struct resource at32_eic0_resource[] = {
+-	{
+-		.start	= 0xfff00100,
+-		.end	= 0xfff0013f,
+-		.flags	= IORESOURCE_MEM,
+-	},
+-	IRQ(19),
+-};
+-
+-DEFINE_DEV(at32_pm, 0);
+-DEFINE_DEV(at32ap700x_rtc, 0);
+-DEFINE_DEV(at32_wdt, 0);
+-DEFINE_DEV(at32_eic, 0);
+-
+-/*
+- * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
+- * is always running.
+- */
+-static struct clk at32_pm_pclk = {
+-	.name		= "pclk",
+-	.dev		= &at32_pm0_device.dev,
+-	.parent		= &pbb_clk,
+-	.mode		= pbb_clk_mode,
+-	.get_rate	= pbb_clk_get_rate,
+-	.users		= 1,
+-	.index		= 0,
+-};
+-
+-static struct resource intc0_resource[] = {
+-	PBMEM(0xfff00400),
+-};
+-struct platform_device at32_intc0_device = {
+-	.name		= "intc",
+-	.id		= 0,
+-	.resource	= intc0_resource,
+-	.num_resources	= ARRAY_SIZE(intc0_resource),
+-};
+-DEV_CLK(pclk, at32_intc0, pbb, 1);
+-
+-static struct clk ebi_clk = {
+-	.name		= "ebi",
+-	.parent		= &hsb_clk,
+-	.mode		= hsb_clk_mode,
+-	.get_rate	= hsb_clk_get_rate,
+-	.users		= 1,
+-};
+-static struct clk hramc_clk = {
+-	.name		= "hramc",
+-	.parent		= &hsb_clk,
+-	.mode		= hsb_clk_mode,
+-	.get_rate	= hsb_clk_get_rate,
+-	.users		= 1,
+-	.index		= 3,
+-};
+-
+-static struct resource smc0_resource[] = {
+-	PBMEM(0xfff03400),
+-};
+-DEFINE_DEV(smc, 0);
+-DEV_CLK(pclk, smc0, pbb, 13);
+-DEV_CLK(mck, smc0, hsb, 0);
+-
+-static struct platform_device pdc_device = {
+-	.name		= "pdc",
+-	.id		= 0,
+-};
+-DEV_CLK(hclk, pdc, hsb, 4);
+-DEV_CLK(pclk, pdc, pba, 16);
+-
+-static struct clk pico_clk = {
+-	.name		= "pico",
+-	.parent		= &cpu_clk,
+-	.mode		= cpu_clk_mode,
+-	.get_rate	= cpu_clk_get_rate,
+-	.users		= 1,
+-};
+-
+-static struct resource dmaca0_resource[] = {
+-	{
+-		.start	= 0xff200000,
+-		.end	= 0xff20ffff,
+-		.flags	= IORESOURCE_MEM,
+-	},
+-	IRQ(2),
+-};
+-DEFINE_DEV(dmaca, 0);
+-DEV_CLK(hclk, dmaca0, hsb, 10);
+-
+-/* --------------------------------------------------------------------
+- * HMATRIX
+- * -------------------------------------------------------------------- */
+-
+-static struct clk hmatrix_clk = {
+-	.name		= "hmatrix_clk",
+-	.parent		= &pbb_clk,
+-	.mode		= pbb_clk_mode,
+-	.get_rate	= pbb_clk_get_rate,
+-	.index		= 2,
+-	.users		= 1,
+-};
+-#define HMATRIX_BASE	((void __iomem *)0xfff00800)
+-
+-#define hmatrix_readl(reg)					\
+-	__raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
+-#define hmatrix_writel(reg,value)				\
+-	__raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
+-
+-/*
+- * Set bits in the HMATRIX Special Function Register (SFR) used by the
+- * External Bus Interface (EBI). This can be used to enable special
+- * features like CompactFlash support, NAND Flash support, etc. on
+- * certain chipselects.
+- */
+-static inline void set_ebi_sfr_bits(u32 mask)
+-{
+-	u32 sfr;
+-
+-	clk_enable(&hmatrix_clk);
+-	sfr = hmatrix_readl(SFR4);
+-	sfr |= mask;
+-	hmatrix_writel(SFR4, sfr);
+-	clk_disable(&hmatrix_clk);
+-}
+-
+-/* --------------------------------------------------------------------
+- *  System Timer/Counter (TC)
+- * -------------------------------------------------------------------- */
+-static struct resource at32_systc0_resource[] = {
+-	PBMEM(0xfff00c00),
+-	IRQ(22),
+-};
+-struct platform_device at32_systc0_device = {
+-	.name		= "systc",
+-	.id		= 0,
+-	.resource	= at32_systc0_resource,
+-	.num_resources	= ARRAY_SIZE(at32_systc0_resource),
+-};
+-DEV_CLK(pclk, at32_systc0, pbb, 3);
+-
+-/* --------------------------------------------------------------------
+- *  PIO
+- * -------------------------------------------------------------------- */
+-
+-static struct resource pio0_resource[] = {
+-	PBMEM(0xffe02800),
+-	IRQ(13),
+-};
+-DEFINE_DEV(pio, 0);
+-DEV_CLK(mck, pio0, pba, 10);
+-
+-static struct resource pio1_resource[] = {
+-	PBMEM(0xffe02c00),
+-	IRQ(14),
+-};
+-DEFINE_DEV(pio, 1);
+-DEV_CLK(mck, pio1, pba, 11);
+-
+-static struct resource pio2_resource[] = {
+-	PBMEM(0xffe03000),
+-	IRQ(15),
+-};
+-DEFINE_DEV(pio, 2);
+-DEV_CLK(mck, pio2, pba, 12);
+-
+-static struct resource pio3_resource[] = {
+-	PBMEM(0xffe03400),
+-	IRQ(16),
+-};
+-DEFINE_DEV(pio, 3);
+-DEV_CLK(mck, pio3, pba, 13);
+-
+-static struct resource pio4_resource[] = {
+-	PBMEM(0xffe03800),
+-	IRQ(17),
+-};
+-DEFINE_DEV(pio, 4);
+-DEV_CLK(mck, pio4, pba, 14);
+-
+-void __init at32_add_system_devices(void)
+-{
+-	platform_device_register(&at32_pm0_device);
+-	platform_device_register(&at32_intc0_device);
+-	platform_device_register(&at32ap700x_rtc0_device);
+-	platform_device_register(&at32_wdt0_device);
+-	platform_device_register(&at32_eic0_device);
+-	platform_device_register(&smc0_device);
+-	platform_device_register(&pdc_device);
+-	platform_device_register(&dmaca0_device);
+-
+-	platform_device_register(&at32_systc0_device);
+-
+-	platform_device_register(&pio0_device);
+-	platform_device_register(&pio1_device);
+-	platform_device_register(&pio2_device);
+-	platform_device_register(&pio3_device);
+-	platform_device_register(&pio4_device);
+-}
+-
+-/* --------------------------------------------------------------------
+- *  USART
+- * -------------------------------------------------------------------- */
+-
+-static struct atmel_uart_data atmel_usart0_data = {
+-	.use_dma_tx	= 1,
+-	.use_dma_rx	= 1,
+-};
+-static struct resource atmel_usart0_resource[] = {
+-	PBMEM(0xffe00c00),
+-	IRQ(6),
+-};
+-DEFINE_DEV_DATA(atmel_usart, 0);
+-DEV_CLK(usart, atmel_usart0, pba, 3);
+-
+-static struct atmel_uart_data atmel_usart1_data = {
+-	.use_dma_tx	= 1,
+-	.use_dma_rx	= 1,
+-};
+-static struct resource atmel_usart1_resource[] = {
+-	PBMEM(0xffe01000),
+-	IRQ(7),
+-};
+-DEFINE_DEV_DATA(atmel_usart, 1);
+-DEV_CLK(usart, atmel_usart1, pba, 4);
+-
+-static struct atmel_uart_data atmel_usart2_data = {
+-	.use_dma_tx	= 1,
+-	.use_dma_rx	= 1,
+-};
+-static struct resource atmel_usart2_resource[] = {
+-	PBMEM(0xffe01400),
+-	IRQ(8),
+-};
+-DEFINE_DEV_DATA(atmel_usart, 2);
+-DEV_CLK(usart, atmel_usart2, pba, 5);
+-
+-static struct atmel_uart_data atmel_usart3_data = {
+-	.use_dma_tx	= 1,
+-	.use_dma_rx	= 1,
+-};
+-static struct resource atmel_usart3_resource[] = {
+-	PBMEM(0xffe01800),
+-	IRQ(9),
+-};
+-DEFINE_DEV_DATA(atmel_usart, 3);
+-DEV_CLK(usart, atmel_usart3, pba, 6);
+-
+-static inline void configure_usart0_pins(void)
+-{
+-	select_peripheral(PA(8),  PERIPH_B, 0);	/* RXD	*/
+-	select_peripheral(PA(9),  PERIPH_B, 0);	/* TXD	*/
+-}
+-
+-static inline void configure_usart1_pins(void)
+-{
+-	select_peripheral(PA(17), PERIPH_A, 0);	/* RXD	*/
+-	select_peripheral(PA(18), PERIPH_A, 0);	/* TXD	*/
+-}
+-
+-static inline void configure_usart2_pins(void)
+-{
+-	select_peripheral(PB(26), PERIPH_B, 0);	/* RXD	*/
+-	select_peripheral(PB(27), PERIPH_B, 0);	/* TXD	*/
+-}
+-
+-static inline void configure_usart3_pins(void)
+-{
+-	select_peripheral(PB(18), PERIPH_B, 0);	/* RXD	*/
+-	select_peripheral(PB(17), PERIPH_B, 0);	/* TXD	*/
+-}
+-
+-static struct platform_device *__initdata at32_usarts[4];
+-
+-void __init at32_map_usart(unsigned int hw_id, unsigned int line)
+-{
+-	struct platform_device *pdev;
+-
+-	switch (hw_id) {
+-	case 0:
+-		pdev = &atmel_usart0_device;
+-		configure_usart0_pins();
+-		break;
+-	case 1:
+-		pdev = &atmel_usart1_device;
+-		configure_usart1_pins();
+-		break;
+-	case 2:
+-		pdev = &atmel_usart2_device;
+-		configure_usart2_pins();
+-		break;
+-	case 3:
+-		pdev = &atmel_usart3_device;
+-		configure_usart3_pins();
+-		break;
+-	default:
+-		return;
+-	}
+-
+-	if (PXSEG(pdev->resource[0].start) == P4SEG) {
+-		/* Addresses in the P4 segment are permanently mapped 1:1 */
+-		struct atmel_uart_data *data = pdev->dev.platform_data;
+-		data->regs = (void __iomem *)pdev->resource[0].start;
+-	}
+-
+-	pdev->id = line;
+-	at32_usarts[line] = pdev;
+-}
+-
+-struct platform_device *__init at32_add_device_usart(unsigned int id)
+-{
+-	platform_device_register(at32_usarts[id]);
+-	return at32_usarts[id];
+-}
+-
+-struct platform_device *atmel_default_console_device;
+-
+-void __init at32_setup_serial_console(unsigned int usart_id)
+-{
+-	atmel_default_console_device = at32_usarts[usart_id];
+-}
+-
+-/* --------------------------------------------------------------------
+- *  Ethernet
+- * -------------------------------------------------------------------- */
+-
+-static struct eth_platform_data macb0_data;
+-static struct resource macb0_resource[] = {
+-	PBMEM(0xfff01800),
+-	IRQ(25),
+-};
+-DEFINE_DEV_DATA(macb, 0);
+-DEV_CLK(hclk, macb0, hsb, 8);
+-DEV_CLK(pclk, macb0, pbb, 6);
+-
+-static struct eth_platform_data macb1_data;
+-static struct resource macb1_resource[] = {
+-	PBMEM(0xfff01c00),
+-	IRQ(26),
+-};
+-DEFINE_DEV_DATA(macb, 1);
+-DEV_CLK(hclk, macb1, hsb, 9);
+-DEV_CLK(pclk, macb1, pbb, 7);
+-
+-struct platform_device *__init
+-at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
+-{
+-	struct platform_device *pdev;
+-
+-	switch (id) {
+-	case 0:
+-		pdev = &macb0_device;
+-
+-		select_peripheral(PC(3),  PERIPH_A, 0);	/* TXD0	*/
+-		select_peripheral(PC(4),  PERIPH_A, 0);	/* TXD1	*/
+-		select_peripheral(PC(7),  PERIPH_A, 0);	/* TXEN	*/
+-		select_peripheral(PC(8),  PERIPH_A, 0);	/* TXCK */
+-		select_peripheral(PC(9),  PERIPH_A, 0);	/* RXD0	*/
+-		select_peripheral(PC(10), PERIPH_A, 0);	/* RXD1	*/
+-		select_peripheral(PC(13), PERIPH_A, 0);	/* RXER	*/
+-		select_peripheral(PC(15), PERIPH_A, 0);	/* RXDV	*/
+-		select_peripheral(PC(16), PERIPH_A, 0);	/* MDC	*/
+-		select_peripheral(PC(17), PERIPH_A, 0);	/* MDIO	*/
+-
+-		if (!data->is_rmii) {
+-			select_peripheral(PC(0),  PERIPH_A, 0);	/* COL	*/
+-			select_peripheral(PC(1),  PERIPH_A, 0);	/* CRS	*/
+-			select_peripheral(PC(2),  PERIPH_A, 0);	/* TXER	*/
+-			select_peripheral(PC(5),  PERIPH_A, 0);	/* TXD2	*/
+-			select_peripheral(PC(6),  PERIPH_A, 0);	/* TXD3 */
+-			select_peripheral(PC(11), PERIPH_A, 0);	/* RXD2	*/
+-			select_peripheral(PC(12), PERIPH_A, 0);	/* RXD3	*/
+-			select_peripheral(PC(14), PERIPH_A, 0);	/* RXCK	*/
+-			select_peripheral(PC(18), PERIPH_A, 0);	/* SPD	*/
+-		}
+-		break;
+-
+-	case 1:
+-		pdev = &macb1_device;
+-
+-		select_peripheral(PD(13), PERIPH_B, 0);		/* TXD0	*/
+-		select_peripheral(PD(14), PERIPH_B, 0);		/* TXD1	*/
+-		select_peripheral(PD(11), PERIPH_B, 0);		/* TXEN	*/
+-		select_peripheral(PD(12), PERIPH_B, 0);		/* TXCK */
+-		select_peripheral(PD(10), PERIPH_B, 0);		/* RXD0	*/
+-		select_peripheral(PD(6),  PERIPH_B, 0);		/* RXD1	*/
+-		select_peripheral(PD(5),  PERIPH_B, 0);		/* RXER	*/
+-		select_peripheral(PD(4),  PERIPH_B, 0);		/* RXDV	*/
+-		select_peripheral(PD(3),  PERIPH_B, 0);		/* MDC	*/
+-		select_peripheral(PD(2),  PERIPH_B, 0);		/* MDIO	*/
+-
+-		if (!data->is_rmii) {
+-			select_peripheral(PC(19), PERIPH_B, 0);	/* COL	*/
+-			select_peripheral(PC(23), PERIPH_B, 0);	/* CRS	*/
+-			select_peripheral(PC(26), PERIPH_B, 0);	/* TXER	*/
+-			select_peripheral(PC(27), PERIPH_B, 0);	/* TXD2	*/
+-			select_peripheral(PC(28), PERIPH_B, 0);	/* TXD3 */
+-			select_peripheral(PC(29), PERIPH_B, 0);	/* RXD2	*/
+-			select_peripheral(PC(30), PERIPH_B, 0);	/* RXD3	*/
+-			select_peripheral(PC(24), PERIPH_B, 0);	/* RXCK	*/
+-			select_peripheral(PD(15), PERIPH_B, 0);	/* SPD	*/
+-		}
+-		break;
+-
+-	default:
+-		return NULL;
 -	}
 -
+-	memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data));
+-	platform_device_register(pdev);
 -
--	. = ALIGN(8);
--	.bss    	: AT(ADDR(.bss) - LOAD_OFFSET) {
--		__bss_start = .;
--		*(.bss)
--		*(COMMON)
--		. = ALIGN(8);
--		__bss_stop = .;
--		_end = .;
+-	return pdev;
+-}
+-
+-/* --------------------------------------------------------------------
+- *  SPI
+- * -------------------------------------------------------------------- */
+-static struct resource atmel_spi0_resource[] = {
+-	PBMEM(0xffe00000),
+-	IRQ(3),
+-};
+-DEFINE_DEV(atmel_spi, 0);
+-DEV_CLK(spi_clk, atmel_spi0, pba, 0);
+-
+-static struct resource atmel_spi1_resource[] = {
+-	PBMEM(0xffe00400),
+-	IRQ(4),
+-};
+-DEFINE_DEV(atmel_spi, 1);
+-DEV_CLK(spi_clk, atmel_spi1, pba, 1);
+-
+-static void __init
+-at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
+-		      unsigned int n, const u8 *pins)
+-{
+-	unsigned int pin, mode;
+-
+-	for (; n; n--, b++) {
+-		b->bus_num = bus_num;
+-		if (b->chip_select >= 4)
+-			continue;
+-		pin = (unsigned)b->controller_data;
+-		if (!pin) {
+-			pin = pins[b->chip_select];
+-			b->controller_data = (void *)pin;
+-		}
+-		mode = AT32_GPIOF_OUTPUT;
+-		if (!(b->mode & SPI_CS_HIGH))
+-			mode |= AT32_GPIOF_HIGH;
+-		at32_select_gpio(pin, mode);
 -	}
+-}
 -
--	/* When something in the kernel is NOT compiled as a module, the module
--	 * cleanup code and data are put into these segments. Both can then be
--	 * thrown away, as cleanup code is never called unless it's a module.
+-struct platform_device *__init
+-at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
+-{
+-	/*
+-	 * Manage the chipselects as GPIOs, normally using the same pins
+-	 * the SPI controller expects; but boards can use other pins.
 -	 */
--	/DISCARD/       	: {
--		*(.exit.data)
--		*(.exitcall.exit)
+-	static u8 __initdata spi0_pins[] =
+-		{ GPIO_PIN_PA(3), GPIO_PIN_PA(4),
+-		  GPIO_PIN_PA(5), GPIO_PIN_PA(20), };
+-	static u8 __initdata spi1_pins[] =
+-		{ GPIO_PIN_PB(2), GPIO_PIN_PB(3),
+-		  GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
+-	struct platform_device *pdev;
+-
+-	switch (id) {
+-	case 0:
+-		pdev = &atmel_spi0_device;
+-		select_peripheral(PA(0),  PERIPH_A, 0);	/* MISO	 */
+-		select_peripheral(PA(1),  PERIPH_A, 0);	/* MOSI	 */
+-		select_peripheral(PA(2),  PERIPH_A, 0);	/* SCK	 */
+-		at32_spi_setup_slaves(0, b, n, spi0_pins);
+-		break;
+-
+-	case 1:
+-		pdev = &atmel_spi1_device;
+-		select_peripheral(PB(0),  PERIPH_B, 0);	/* MISO  */
+-		select_peripheral(PB(1),  PERIPH_B, 0);	/* MOSI  */
+-		select_peripheral(PB(5),  PERIPH_B, 0);	/* SCK   */
+-		at32_spi_setup_slaves(1, b, n, spi1_pins);
+-		break;
+-
+-	default:
+-		return NULL;
 -	}
 -
--	DWARF_DEBUG
+-	spi_register_board_info(b, n);
+-	platform_device_register(pdev);
+-	return pdev;
 -}
-diff --git a/arch/avr32/mach-at32ap/Kconfig b/arch/avr32/mach-at32ap/Kconfig
-index eb30783..43c5b9f 100644
---- a/arch/avr32/mach-at32ap/Kconfig
-+++ b/arch/avr32/mach-at32ap/Kconfig
-@@ -26,6 +26,13 @@ config AP7000_8_BIT_SMC
- 
- endchoice
- 
-+config GPIO_DEV
-+	bool "GPIO /dev interface"
-+	select CONFIGFS_FS
-+	default n
-+	help
-+	  Say `Y' to enable a /dev interface to the GPIO pins.
+-
+-/* --------------------------------------------------------------------
+- *  TWI
+- * -------------------------------------------------------------------- */
+-static struct resource atmel_twi0_resource[] __initdata = {
+-	PBMEM(0xffe00800),
+-	IRQ(5),
+-};
+-static struct clk atmel_twi0_pclk = {
+-	.name		= "twi_pclk",
+-	.parent		= &pba_clk,
+-	.mode		= pba_clk_mode,
+-	.get_rate	= pba_clk_get_rate,
+-	.index		= 2,
+-};
+-
+-struct platform_device *__init at32_add_device_twi(unsigned int id)
+-{
+-	struct platform_device *pdev;
+-
+-	if (id != 0)
+-		return NULL;
+-
+-	pdev = platform_device_alloc("atmel_twi", id);
+-	if (!pdev)
+-		return NULL;
+-
+-	if (platform_device_add_resources(pdev, atmel_twi0_resource,
+-				ARRAY_SIZE(atmel_twi0_resource)))
+-		goto err_add_resources;
+-
+-	select_peripheral(PA(6),  PERIPH_A, 0);	/* SDA	*/
+-	select_peripheral(PA(7),  PERIPH_A, 0);	/* SDL	*/
+-
+-	atmel_twi0_pclk.dev = &pdev->dev;
+-
+-	platform_device_add(pdev);
+-	return pdev;
+-
+-err_add_resources:
+-	platform_device_put(pdev);
+-	return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- * MMC
+- * -------------------------------------------------------------------- */
+-static struct resource atmel_mci0_resource[] __initdata = {
+-	PBMEM(0xfff02400),
+-	IRQ(28),
+-};
+-static struct clk atmel_mci0_pclk = {
+-	.name		= "mci_clk",
+-	.parent		= &pbb_clk,
+-	.mode		= pbb_clk_mode,
+-	.get_rate	= pbb_clk_get_rate,
+-	.index		= 9,
+-};
+-
+-struct platform_device *__init at32_add_device_mci(unsigned int id)
+-{
+-	struct platform_device *pdev;
+-
+-	if (id != 0)
+-		return NULL;
+-
+-	pdev = platform_device_alloc("atmel_mci", id);
+-	if (!pdev)
+-		return NULL;
+-
+-	if (platform_device_add_resources(pdev, atmel_mci0_resource,
+-				ARRAY_SIZE(atmel_mci0_resource)))
+-		goto err_add_resources;
+-
+-	select_peripheral(PA(10), PERIPH_A, 0);	/* CLK	 */
+-	select_peripheral(PA(11), PERIPH_A, 0);	/* CMD	 */
+-	select_peripheral(PA(12), PERIPH_A, 0);	/* DATA0 */
+-	select_peripheral(PA(13), PERIPH_A, 0);	/* DATA1 */
+-	select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
+-	select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
+-
+-	atmel_mci0_pclk.dev = &pdev->dev;
+-
+-	platform_device_add(pdev);
+-	return pdev;
+-
+-err_add_resources:
+-	platform_device_put(pdev);
+-	return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- *  LCDC
+- * -------------------------------------------------------------------- */
+-static struct atmel_lcdfb_info atmel_lcdfb0_data;
+-static struct resource atmel_lcdfb0_resource[] = {
+-	{
+-		.start		= 0xff000000,
+-		.end		= 0xff000fff,
+-		.flags		= IORESOURCE_MEM,
+-	},
+-	IRQ(1),
+-	{
+-		/* Placeholder for pre-allocated fb memory */
+-		.start		= 0x00000000,
+-		.end		= 0x00000000,
+-		.flags		= 0,
+-	},
+-};
+-DEFINE_DEV_DATA(atmel_lcdfb, 0);
+-DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
+-static struct clk atmel_lcdfb0_pixclk = {
+-	.name		= "lcdc_clk",
+-	.dev		= &atmel_lcdfb0_device.dev,
+-	.mode		= genclk_mode,
+-	.get_rate	= genclk_get_rate,
+-	.set_rate	= genclk_set_rate,
+-	.set_parent	= genclk_set_parent,
+-	.index		= 7,
+-};
+-
+-struct platform_device *__init
+-at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
+-		     unsigned long fbmem_start, unsigned long fbmem_len)
+-{
+-	struct platform_device *pdev;
+-	struct atmel_lcdfb_info *info;
+-	struct fb_monspecs *monspecs;
+-	struct fb_videomode *modedb;
+-	unsigned int modedb_size;
+-
+-	/*
+-	 * Do a deep copy of the fb data, monspecs and modedb. Make
+-	 * sure all allocations are done before setting up the
+-	 * portmux.
+-	 */
+-	monspecs = kmemdup(data->default_monspecs,
+-			   sizeof(struct fb_monspecs), GFP_KERNEL);
+-	if (!monspecs)
+-		return NULL;
+-
+-	modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len;
+-	modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL);
+-	if (!modedb)
+-		goto err_dup_modedb;
+-	monspecs->modedb = modedb;
+-
+-	switch (id) {
+-	case 0:
+-		pdev = &atmel_lcdfb0_device;
+-		select_peripheral(PC(19), PERIPH_A, 0);	/* CC	  */
+-		select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
+-		select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
+-		select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
+-		select_peripheral(PC(23), PERIPH_A, 0);	/* DVAL	  */
+-		select_peripheral(PC(24), PERIPH_A, 0);	/* MODE	  */
+-		select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
+-		select_peripheral(PC(26), PERIPH_A, 0);	/* DATA0  */
+-		select_peripheral(PC(27), PERIPH_A, 0);	/* DATA1  */
+-		select_peripheral(PC(28), PERIPH_A, 0);	/* DATA2  */
+-		select_peripheral(PC(29), PERIPH_A, 0);	/* DATA3  */
+-		select_peripheral(PC(30), PERIPH_A, 0);	/* DATA4  */
+-		select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
+-		select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
+-		select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
+-		select_peripheral(PD(2),  PERIPH_A, 0);	/* DATA8  */
+-		select_peripheral(PD(3),  PERIPH_A, 0);	/* DATA9  */
+-		select_peripheral(PD(4),  PERIPH_A, 0);	/* DATA10 */
+-		select_peripheral(PD(5),  PERIPH_A, 0);	/* DATA11 */
+-		select_peripheral(PD(6),  PERIPH_A, 0);	/* DATA12 */
+-		select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
+-		select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
+-		select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
+-		select_peripheral(PD(10), PERIPH_A, 0);	/* DATA16 */
+-		select_peripheral(PD(11), PERIPH_A, 0);	/* DATA17 */
+-		select_peripheral(PD(12), PERIPH_A, 0);	/* DATA18 */
+-		select_peripheral(PD(13), PERIPH_A, 0);	/* DATA19 */
+-		select_peripheral(PD(14), PERIPH_A, 0);	/* DATA20 */
+-		select_peripheral(PD(15), PERIPH_A, 0);	/* DATA21 */
+-		select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
+-		select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
+-
+-		clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
+-		clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
+-		break;
+-
+-	default:
+-		goto err_invalid_id;
+-	}
+-
+-	if (fbmem_len) {
+-		pdev->resource[2].start = fbmem_start;
+-		pdev->resource[2].end = fbmem_start + fbmem_len - 1;
+-		pdev->resource[2].flags = IORESOURCE_MEM;
+-	}
+-
+-	info = pdev->dev.platform_data;
+-	memcpy(info, data, sizeof(struct atmel_lcdfb_info));
+-	info->default_monspecs = monspecs;
+-
+-	platform_device_register(pdev);
+-	return pdev;
+-
+-err_invalid_id:
+-	kfree(modedb);
+-err_dup_modedb:
+-	kfree(monspecs);
+-	return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- *  SSC
+- * -------------------------------------------------------------------- */
+-static struct resource ssc0_resource[] = {
+-	PBMEM(0xffe01c00),
+-	IRQ(10),
+-};
+-DEFINE_DEV(ssc, 0);
+-DEV_CLK(pclk, ssc0, pba, 7);
+-
+-static struct resource ssc1_resource[] = {
+-	PBMEM(0xffe02000),
+-	IRQ(11),
+-};
+-DEFINE_DEV(ssc, 1);
+-DEV_CLK(pclk, ssc1, pba, 8);
+-
+-static struct resource ssc2_resource[] = {
+-	PBMEM(0xffe02400),
+-	IRQ(12),
+-};
+-DEFINE_DEV(ssc, 2);
+-DEV_CLK(pclk, ssc2, pba, 9);
+-
+-struct platform_device *__init
+-at32_add_device_ssc(unsigned int id, unsigned int flags)
+-{
+-	struct platform_device *pdev;
+-
+-	switch (id) {
+-	case 0:
+-		pdev = &ssc0_device;
+-		if (flags & ATMEL_SSC_RF)
+-			select_peripheral(PA(21), PERIPH_A, 0);	/* RF */
+-		if (flags & ATMEL_SSC_RK)
+-			select_peripheral(PA(22), PERIPH_A, 0);	/* RK */
+-		if (flags & ATMEL_SSC_TK)
+-			select_peripheral(PA(23), PERIPH_A, 0);	/* TK */
+-		if (flags & ATMEL_SSC_TF)
+-			select_peripheral(PA(24), PERIPH_A, 0);	/* TF */
+-		if (flags & ATMEL_SSC_TD)
+-			select_peripheral(PA(25), PERIPH_A, 0);	/* TD */
+-		if (flags & ATMEL_SSC_RD)
+-			select_peripheral(PA(26), PERIPH_A, 0);	/* RD */
+-		break;
+-	case 1:
+-		pdev = &ssc1_device;
+-		if (flags & ATMEL_SSC_RF)
+-			select_peripheral(PA(0), PERIPH_B, 0);	/* RF */
+-		if (flags & ATMEL_SSC_RK)
+-			select_peripheral(PA(1), PERIPH_B, 0);	/* RK */
+-		if (flags & ATMEL_SSC_TK)
+-			select_peripheral(PA(2), PERIPH_B, 0);	/* TK */
+-		if (flags & ATMEL_SSC_TF)
+-			select_peripheral(PA(3), PERIPH_B, 0);	/* TF */
+-		if (flags & ATMEL_SSC_TD)
+-			select_peripheral(PA(4), PERIPH_B, 0);	/* TD */
+-		if (flags & ATMEL_SSC_RD)
+-			select_peripheral(PA(5), PERIPH_B, 0);	/* RD */
+-		break;
+-	case 2:
+-		pdev = &ssc2_device;
+-		if (flags & ATMEL_SSC_TD)
+-			select_peripheral(PB(13), PERIPH_A, 0);	/* TD */
+-		if (flags & ATMEL_SSC_RD)
+-			select_peripheral(PB(14), PERIPH_A, 0);	/* RD */
+-		if (flags & ATMEL_SSC_TK)
+-			select_peripheral(PB(15), PERIPH_A, 0);	/* TK */
+-		if (flags & ATMEL_SSC_TF)
+-			select_peripheral(PB(16), PERIPH_A, 0);	/* TF */
+-		if (flags & ATMEL_SSC_RF)
+-			select_peripheral(PB(17), PERIPH_A, 0);	/* RF */
+-		if (flags & ATMEL_SSC_RK)
+-			select_peripheral(PB(18), PERIPH_A, 0);	/* RK */
+-		break;
+-	default:
+-		return NULL;
+-	}
+-
+-	platform_device_register(pdev);
+-	return pdev;
+-}
+-
+-/* --------------------------------------------------------------------
+- *  USB Device Controller
+- * -------------------------------------------------------------------- */
+-static struct resource usba0_resource[] __initdata = {
+-	{
+-		.start		= 0xff300000,
+-		.end		= 0xff3fffff,
+-		.flags		= IORESOURCE_MEM,
+-	}, {
+-		.start		= 0xfff03000,
+-		.end		= 0xfff033ff,
+-		.flags		= IORESOURCE_MEM,
+-	},
+-	IRQ(31),
+-};
+-static struct clk usba0_pclk = {
+-	.name		= "pclk",
+-	.parent		= &pbb_clk,
+-	.mode		= pbb_clk_mode,
+-	.get_rate	= pbb_clk_get_rate,
+-	.index		= 12,
+-};
+-static struct clk usba0_hclk = {
+-	.name		= "hclk",
+-	.parent		= &hsb_clk,
+-	.mode		= hsb_clk_mode,
+-	.get_rate	= hsb_clk_get_rate,
+-	.index		= 6,
+-};
+-
+-struct platform_device *__init
+-at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
+-{
+-	struct platform_device *pdev;
+-
+-	if (id != 0)
+-		return NULL;
+-
+-	pdev = platform_device_alloc("atmel_usba_udc", 0);
+-	if (!pdev)
+-		return NULL;
+-
+-	if (platform_device_add_resources(pdev, usba0_resource,
+-					  ARRAY_SIZE(usba0_resource)))
+-		goto out_free_pdev;
+-
+-	if (data) {
+-		if (platform_device_add_data(pdev, data, sizeof(*data)))
+-			goto out_free_pdev;
+-
+-		if (data->vbus_pin != GPIO_PIN_NONE)
+-			at32_select_gpio(data->vbus_pin, 0);
+-	}
+-
+-	usba0_pclk.dev = &pdev->dev;
+-	usba0_hclk.dev = &pdev->dev;
+-
+-	platform_device_add(pdev);
+-
+-	return pdev;
+-
+-out_free_pdev:
+-	platform_device_put(pdev);
+-	return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- * IDE / CompactFlash
+- * -------------------------------------------------------------------- */
+-static struct resource at32_smc_cs4_resource[] __initdata = {
+-	{
+-		.start	= 0x04000000,
+-		.end	= 0x07ffffff,
+-		.flags	= IORESOURCE_MEM,
+-	},
+-	IRQ(~0UL), /* Magic IRQ will be overridden */
+-};
+-static struct resource at32_smc_cs5_resource[] __initdata = {
+-	{
+-		.start	= 0x20000000,
+-		.end	= 0x23ffffff,
+-		.flags	= IORESOURCE_MEM,
+-	},
+-	IRQ(~0UL), /* Magic IRQ will be overridden */
+-};
+-
+-static int __init at32_init_ide_or_cf(struct platform_device *pdev,
+-		unsigned int cs, unsigned int extint)
+-{
+-	static unsigned int extint_pin_map[4] __initdata = {
+-		GPIO_PIN_PB(25),
+-		GPIO_PIN_PB(26),
+-		GPIO_PIN_PB(27),
+-		GPIO_PIN_PB(28),
+-	};
+-	static bool common_pins_initialized __initdata = false;
+-	unsigned int extint_pin;
+-	int ret;
+-
+-	if (extint >= ARRAY_SIZE(extint_pin_map))
+-		return -EINVAL;
+-	extint_pin = extint_pin_map[extint];
+-
+-	switch (cs) {
+-	case 4:
+-		ret = platform_device_add_resources(pdev,
+-				at32_smc_cs4_resource,
+-				ARRAY_SIZE(at32_smc_cs4_resource));
+-		if (ret)
+-			return ret;
+-
+-		select_peripheral(PE(21), PERIPH_A, 0); /* NCS4   -> OE_N  */
+-		set_ebi_sfr_bits(HMATRIX_BIT(CS4A));
+-		break;
+-	case 5:
+-		ret = platform_device_add_resources(pdev,
+-				at32_smc_cs5_resource,
+-				ARRAY_SIZE(at32_smc_cs5_resource));
+-		if (ret)
+-			return ret;
+-
+-		select_peripheral(PE(22), PERIPH_A, 0); /* NCS5   -> OE_N  */
+-		set_ebi_sfr_bits(HMATRIX_BIT(CS5A));
+-		break;
+-	default:
+-		return -EINVAL;
+-	}
+-
+-	if (!common_pins_initialized) {
+-		select_peripheral(PE(19), PERIPH_A, 0);	/* CFCE1  -> CS0_N */
+-		select_peripheral(PE(20), PERIPH_A, 0);	/* CFCE2  -> CS1_N */
+-		select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW  -> DIR   */
+-		select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT  <- IORDY */
+-		common_pins_initialized = true;
+-	}
+-
+-	at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
+-
+-	pdev->resource[1].start = EIM_IRQ_BASE + extint;
+-	pdev->resource[1].end = pdev->resource[1].start;
+-
+-	return 0;
+-}
+-
+-struct platform_device *__init
+-at32_add_device_ide(unsigned int id, unsigned int extint,
+-		    struct ide_platform_data *data)
+-{
+-	struct platform_device *pdev;
+-
+-	pdev = platform_device_alloc("at32_ide", id);
+-	if (!pdev)
+-		goto fail;
+-
+-	if (platform_device_add_data(pdev, data,
+-				sizeof(struct ide_platform_data)))
+-		goto fail;
+-
+-	if (at32_init_ide_or_cf(pdev, data->cs, extint))
+-		goto fail;
+-
+-	platform_device_add(pdev);
+-	return pdev;
+-
+-fail:
+-	platform_device_put(pdev);
+-	return NULL;
+-}
+-
+-struct platform_device *__init
+-at32_add_device_cf(unsigned int id, unsigned int extint,
+-		    struct cf_platform_data *data)
+-{
+-	struct platform_device *pdev;
+-
+-	pdev = platform_device_alloc("at32_cf", id);
+-	if (!pdev)
+-		goto fail;
+-
+-	if (platform_device_add_data(pdev, data,
+-				sizeof(struct cf_platform_data)))
+-		goto fail;
+-
+-	if (at32_init_ide_or_cf(pdev, data->cs, extint))
+-		goto fail;
+-
+-	if (data->detect_pin != GPIO_PIN_NONE)
+-		at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH);
+-	if (data->reset_pin != GPIO_PIN_NONE)
+-		at32_select_gpio(data->reset_pin, 0);
+-	if (data->vcc_pin != GPIO_PIN_NONE)
+-		at32_select_gpio(data->vcc_pin, 0);
+-	/* READY is used as extint, so we can't select it as gpio */
+-
+-	platform_device_add(pdev);
+-	return pdev;
+-
+-fail:
+-	platform_device_put(pdev);
+-	return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- * AC97C
+- * -------------------------------------------------------------------- */
+-static struct resource atmel_ac97c0_resource[] __initdata = {
+-	PBMEM(0xfff02800),
+-	IRQ(29),
+-};
+-static struct clk atmel_ac97c0_pclk = {
+-	.name		= "pclk",
+-	.parent		= &pbb_clk,
+-	.mode		= pbb_clk_mode,
+-	.get_rate	= pbb_clk_get_rate,
+-	.index		= 10,
+-};
+-
+-struct platform_device *__init at32_add_device_ac97c(unsigned int id)
+-{
+-	struct platform_device *pdev;
+-
+-	if (id != 0)
+-		return NULL;
+-
+-	pdev = platform_device_alloc("atmel_ac97c", id);
+-	if (!pdev)
+-		return NULL;
+-
+-	if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
+-				ARRAY_SIZE(atmel_ac97c0_resource)))
+-		goto err_add_resources;
+-
+-	select_peripheral(PB(20), PERIPH_B, 0);	/* SYNC	*/
+-	select_peripheral(PB(21), PERIPH_B, 0);	/* SDO	*/
+-	select_peripheral(PB(22), PERIPH_B, 0);	/* SDI	*/
+-	select_peripheral(PB(23), PERIPH_B, 0);	/* SCLK	*/
+-
+-	atmel_ac97c0_pclk.dev = &pdev->dev;
+-
+-	platform_device_add(pdev);
+-	return pdev;
+-
+-err_add_resources:
+-	platform_device_put(pdev);
+-	return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- * ABDAC
+- * -------------------------------------------------------------------- */
+-static struct resource abdac0_resource[] __initdata = {
+-	PBMEM(0xfff02000),
+-	IRQ(27),
+-};
+-static struct clk abdac0_pclk = {
+-	.name		= "pclk",
+-	.parent		= &pbb_clk,
+-	.mode		= pbb_clk_mode,
+-	.get_rate	= pbb_clk_get_rate,
+-	.index		= 8,
+-};
+-static struct clk abdac0_sample_clk = {
+-	.name		= "sample_clk",
+-	.mode		= genclk_mode,
+-	.get_rate	= genclk_get_rate,
+-	.set_rate	= genclk_set_rate,
+-	.set_parent	= genclk_set_parent,
+-	.index		= 6,
+-};
+-
+-struct platform_device *__init at32_add_device_abdac(unsigned int id)
+-{
+-	struct platform_device *pdev;
+-
+-	if (id != 0)
+-		return NULL;
+-
+-	pdev = platform_device_alloc("abdac", id);
+-	if (!pdev)
+-		return NULL;
+-
+-	if (platform_device_add_resources(pdev, abdac0_resource,
+-				ARRAY_SIZE(abdac0_resource)))
+-		goto err_add_resources;
+-
+-	select_peripheral(PB(20), PERIPH_A, 0);	/* DATA1	*/
+-	select_peripheral(PB(21), PERIPH_A, 0);	/* DATA0	*/
+-	select_peripheral(PB(22), PERIPH_A, 0);	/* DATAN1	*/
+-	select_peripheral(PB(23), PERIPH_A, 0);	/* DATAN0	*/
+-
+-	abdac0_pclk.dev = &pdev->dev;
+-	abdac0_sample_clk.dev = &pdev->dev;
+-
+-	platform_device_add(pdev);
+-	return pdev;
+-
+-err_add_resources:
+-	platform_device_put(pdev);
+-	return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- *  GCLK
+- * -------------------------------------------------------------------- */
+-static struct clk gclk0 = {
+-	.name		= "gclk0",
+-	.mode		= genclk_mode,
+-	.get_rate	= genclk_get_rate,
+-	.set_rate	= genclk_set_rate,
+-	.set_parent	= genclk_set_parent,
+-	.index		= 0,
+-};
+-static struct clk gclk1 = {
+-	.name		= "gclk1",
+-	.mode		= genclk_mode,
+-	.get_rate	= genclk_get_rate,
+-	.set_rate	= genclk_set_rate,
+-	.set_parent	= genclk_set_parent,
+-	.index		= 1,
+-};
+-static struct clk gclk2 = {
+-	.name		= "gclk2",
+-	.mode		= genclk_mode,
+-	.get_rate	= genclk_get_rate,
+-	.set_rate	= genclk_set_rate,
+-	.set_parent	= genclk_set_parent,
+-	.index		= 2,
+-};
+-static struct clk gclk3 = {
+-	.name		= "gclk3",
+-	.mode		= genclk_mode,
+-	.get_rate	= genclk_get_rate,
+-	.set_rate	= genclk_set_rate,
+-	.set_parent	= genclk_set_parent,
+-	.index		= 3,
+-};
+-static struct clk gclk4 = {
+-	.name		= "gclk4",
+-	.mode		= genclk_mode,
+-	.get_rate	= genclk_get_rate,
+-	.set_rate	= genclk_set_rate,
+-	.set_parent	= genclk_set_parent,
+-	.index		= 4,
+-};
+-
+-struct clk *at32_clock_list[] = {
+-	&osc32k,
+-	&osc0,
+-	&osc1,
+-	&pll0,
+-	&pll1,
+-	&cpu_clk,
+-	&hsb_clk,
+-	&pba_clk,
+-	&pbb_clk,
+-	&at32_pm_pclk,
+-	&at32_intc0_pclk,
+-	&hmatrix_clk,
+-	&ebi_clk,
+-	&hramc_clk,
+-	&smc0_pclk,
+-	&smc0_mck,
+-	&pdc_hclk,
+-	&pdc_pclk,
+-	&dmaca0_hclk,
+-	&pico_clk,
+-	&pio0_mck,
+-	&pio1_mck,
+-	&pio2_mck,
+-	&pio3_mck,
+-	&pio4_mck,
+-	&at32_systc0_pclk,
+-	&atmel_usart0_usart,
+-	&atmel_usart1_usart,
+-	&atmel_usart2_usart,
+-	&atmel_usart3_usart,
+-	&macb0_hclk,
+-	&macb0_pclk,
+-	&macb1_hclk,
+-	&macb1_pclk,
+-	&atmel_spi0_spi_clk,
+-	&atmel_spi1_spi_clk,
+-	&atmel_twi0_pclk,
+-	&atmel_mci0_pclk,
+-	&atmel_lcdfb0_hck1,
+-	&atmel_lcdfb0_pixclk,
+-	&ssc0_pclk,
+-	&ssc1_pclk,
+-	&ssc2_pclk,
+-	&usba0_hclk,
+-	&usba0_pclk,
+-	&atmel_ac97c0_pclk,
+-	&abdac0_pclk,
+-	&abdac0_sample_clk,
+-	&gclk0,
+-	&gclk1,
+-	&gclk2,
+-	&gclk3,
+-	&gclk4,
+-};
+-unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
+-
+-void __init at32_portmux_init(void)
+-{
+-	at32_init_pio(&pio0_device);
+-	at32_init_pio(&pio1_device);
+-	at32_init_pio(&pio2_device);
+-	at32_init_pio(&pio3_device);
+-	at32_init_pio(&pio4_device);
+-}
+-
+-void __init at32_clock_init(void)
+-{
+-	u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
+-	int i;
+-
+-	if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
+-		main_clock = &pll0;
+-		cpu_clk.parent = &pll0;
+-	} else {
+-		main_clock = &osc0;
+-		cpu_clk.parent = &osc0;
+-	}
+-
+-	if (pm_readl(PLL0) & PM_BIT(PLLOSC))
+-		pll0.parent = &osc1;
+-	if (pm_readl(PLL1) & PM_BIT(PLLOSC))
+-		pll1.parent = &osc1;
+-
+-	genclk_init_parent(&gclk0);
+-	genclk_init_parent(&gclk1);
+-	genclk_init_parent(&gclk2);
+-	genclk_init_parent(&gclk3);
+-	genclk_init_parent(&gclk4);
+-	genclk_init_parent(&atmel_lcdfb0_pixclk);
+-	genclk_init_parent(&abdac0_sample_clk);
+-
+-	/*
+-	 * Turn on all clocks that have at least one user already, and
+-	 * turn off everything else. We only do this for module
+-	 * clocks, and even though it isn't particularly pretty to
+-	 * check the address of the mode function, it should do the
+-	 * trick...
+-	 */
+-	for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
+-		struct clk *clk = at32_clock_list[i];
+-
+-		if (clk->users == 0)
+-			continue;
+-
+-		if (clk->mode == &cpu_clk_mode)
+-			cpu_mask |= 1 << clk->index;
+-		else if (clk->mode == &hsb_clk_mode)
+-			hsb_mask |= 1 << clk->index;
+-		else if (clk->mode == &pba_clk_mode)
+-			pba_mask |= 1 << clk->index;
+-		else if (clk->mode == &pbb_clk_mode)
+-			pbb_mask |= 1 << clk->index;
+-	}
+-
+-	pm_writel(CPU_MASK, cpu_mask);
+-	pm_writel(HSB_MASK, hsb_mask);
+-	pm_writel(PBA_MASK, pba_mask);
+-	pm_writel(PBB_MASK, pbb_mask);
+-}
+diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
+new file mode 100644
+index 0000000..06795d0
+--- /dev/null
++++ b/arch/avr32/mach-at32ap/at32ap700x.c
+@@ -0,0 +1,1809 @@
++/*
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/fb.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/dma-mapping.h>
++#include <linux/spi/spi.h>
++
++#include <asm/io.h>
++#include <asm/irq.h>
++
++#include <asm/arch/at32ap700x.h>
++#include <asm/arch/board.h>
++#include <asm/arch/portmux.h>
++
++#include <video/atmel_lcdc.h>
++
++#include "clock.h"
++#include "hmatrix.h"
++#include "pio.h"
++#include "pm.h"
++
++
++#define PBMEM(base)					\
++	{						\
++		.start		= base,			\
++		.end		= base + 0x3ff,		\
++		.flags		= IORESOURCE_MEM,	\
++	}
++#define IRQ(num)					\
++	{						\
++		.start		= num,			\
++		.end		= num,			\
++		.flags		= IORESOURCE_IRQ,	\
++	}
++#define NAMED_IRQ(num, _name)				\
++	{						\
++		.start		= num,			\
++		.end		= num,			\
++		.name		= _name,		\
++		.flags		= IORESOURCE_IRQ,	\
++	}
++
++/* REVISIT these assume *every* device supports DMA, but several
++ * don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more.
++ */
++#define DEFINE_DEV(_name, _id)					\
++static u64 _name##_id##_dma_mask = DMA_32BIT_MASK;		\
++static struct platform_device _name##_id##_device = {		\
++	.name		= #_name,				\
++	.id		= _id,					\
++	.dev		= {					\
++		.dma_mask = &_name##_id##_dma_mask,		\
++		.coherent_dma_mask = DMA_32BIT_MASK,		\
++	},							\
++	.resource	= _name##_id##_resource,		\
++	.num_resources	= ARRAY_SIZE(_name##_id##_resource),	\
++}
++#define DEFINE_DEV_DATA(_name, _id)				\
++static u64 _name##_id##_dma_mask = DMA_32BIT_MASK;		\
++static struct platform_device _name##_id##_device = {		\
++	.name		= #_name,				\
++	.id		= _id,					\
++	.dev		= {					\
++		.dma_mask = &_name##_id##_dma_mask,		\
++		.platform_data	= &_name##_id##_data,		\
++		.coherent_dma_mask = DMA_32BIT_MASK,		\
++	},							\
++	.resource	= _name##_id##_resource,		\
++	.num_resources	= ARRAY_SIZE(_name##_id##_resource),	\
++}
++
++#define select_peripheral(pin, periph, flags)			\
++	at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
++
++#define DEV_CLK(_name, devname, bus, _index)			\
++static struct clk devname##_##_name = {				\
++	.name		= #_name,				\
++	.dev		= &devname##_device.dev,		\
++	.parent		= &bus##_clk,				\
++	.mode		= bus##_clk_mode,			\
++	.get_rate	= bus##_clk_get_rate,			\
++	.index		= _index,				\
++}
++
++static DEFINE_SPINLOCK(pm_lock);
++
++unsigned long at32ap7000_osc_rates[3] = {
++	[0] = 32768,
++	/* FIXME: these are ATSTK1002-specific */
++	[1] = 20000000,
++	[2] = 12000000,
++};
++
++static unsigned long osc_get_rate(struct clk *clk)
++{
++	return at32ap7000_osc_rates[clk->index];
++}
++
++static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
++{
++	unsigned long div, mul, rate;
++
++	if (!(control & PM_BIT(PLLEN)))
++		return 0;
++
++	div = PM_BFEXT(PLLDIV, control) + 1;
++	mul = PM_BFEXT(PLLMUL, control) + 1;
++
++	rate = clk->parent->get_rate(clk->parent);
++	rate = (rate + div / 2) / div;
++	rate *= mul;
++
++	return rate;
++}
++
++static unsigned long pll0_get_rate(struct clk *clk)
++{
++	u32 control;
++
++	control = pm_readl(PLL0);
++
++	return pll_get_rate(clk, control);
++}
++
++static unsigned long pll1_get_rate(struct clk *clk)
++{
++	u32 control;
++
++	control = pm_readl(PLL1);
++
++	return pll_get_rate(clk, control);
++}
++
++/*
++ * The AT32AP7000 has five primary clock sources: One 32kHz
++ * oscillator, two crystal oscillators and two PLLs.
++ */
++static struct clk osc32k = {
++	.name		= "osc32k",
++	.get_rate	= osc_get_rate,
++	.users		= 1,
++	.index		= 0,
++};
++static struct clk osc0 = {
++	.name		= "osc0",
++	.get_rate	= osc_get_rate,
++	.users		= 1,
++	.index		= 1,
++};
++static struct clk osc1 = {
++	.name		= "osc1",
++	.get_rate	= osc_get_rate,
++	.index		= 2,
++};
++static struct clk pll0 = {
++	.name		= "pll0",
++	.get_rate	= pll0_get_rate,
++	.parent		= &osc0,
++};
++static struct clk pll1 = {
++	.name		= "pll1",
++	.get_rate	= pll1_get_rate,
++	.parent		= &osc0,
++};
++
++/*
++ * The main clock can be either osc0 or pll0.  The boot loader may
++ * have chosen one for us, so we don't really know which one until we
++ * have a look at the SM.
++ */
++static struct clk *main_clock;
++
++/*
++ * Synchronous clocks are generated from the main clock. The clocks
++ * must satisfy the constraint
++ *   fCPU >= fHSB >= fPB
++ * i.e. each clock must not be faster than its parent.
++ */
++static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
++{
++	return main_clock->get_rate(main_clock) >> shift;
++};
++
++static void cpu_clk_mode(struct clk *clk, int enabled)
++{
++	unsigned long flags;
++	u32 mask;
++
++	spin_lock_irqsave(&pm_lock, flags);
++	mask = pm_readl(CPU_MASK);
++	if (enabled)
++		mask |= 1 << clk->index;
++	else
++		mask &= ~(1 << clk->index);
++	pm_writel(CPU_MASK, mask);
++	spin_unlock_irqrestore(&pm_lock, flags);
++}
++
++static unsigned long cpu_clk_get_rate(struct clk *clk)
++{
++	unsigned long cksel, shift = 0;
++
++	cksel = pm_readl(CKSEL);
++	if (cksel & PM_BIT(CPUDIV))
++		shift = PM_BFEXT(CPUSEL, cksel) + 1;
++
++	return bus_clk_get_rate(clk, shift);
++}
++
++static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
++{
++	u32 control;
++	unsigned long parent_rate, child_div, actual_rate, div;
++
++	parent_rate = clk->parent->get_rate(clk->parent);
++	control = pm_readl(CKSEL);
++
++	if (control & PM_BIT(HSBDIV))
++		child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
++	else
++		child_div = 1;
++
++	if (rate > 3 * (parent_rate / 4) || child_div == 1) {
++		actual_rate = parent_rate;
++		control &= ~PM_BIT(CPUDIV);
++	} else {
++		unsigned int cpusel;
++		div = (parent_rate + rate / 2) / rate;
++		if (div > child_div)
++			div = child_div;
++		cpusel = (div > 1) ? (fls(div) - 2) : 0;
++		control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
++		actual_rate = parent_rate / (1 << (cpusel + 1));
++	}
++
++	pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
++			clk->name, rate, actual_rate);
++
++	if (apply)
++		pm_writel(CKSEL, control);
++
++	return actual_rate;
++}
++
++static void hsb_clk_mode(struct clk *clk, int enabled)
++{
++	unsigned long flags;
++	u32 mask;
++
++	spin_lock_irqsave(&pm_lock, flags);
++	mask = pm_readl(HSB_MASK);
++	if (enabled)
++		mask |= 1 << clk->index;
++	else
++		mask &= ~(1 << clk->index);
++	pm_writel(HSB_MASK, mask);
++	spin_unlock_irqrestore(&pm_lock, flags);
++}
++
++static unsigned long hsb_clk_get_rate(struct clk *clk)
++{
++	unsigned long cksel, shift = 0;
++
++	cksel = pm_readl(CKSEL);
++	if (cksel & PM_BIT(HSBDIV))
++		shift = PM_BFEXT(HSBSEL, cksel) + 1;
++
++	return bus_clk_get_rate(clk, shift);
++}
++
++static void pba_clk_mode(struct clk *clk, int enabled)
++{
++	unsigned long flags;
++	u32 mask;
++
++	spin_lock_irqsave(&pm_lock, flags);
++	mask = pm_readl(PBA_MASK);
++	if (enabled)
++		mask |= 1 << clk->index;
++	else
++		mask &= ~(1 << clk->index);
++	pm_writel(PBA_MASK, mask);
++	spin_unlock_irqrestore(&pm_lock, flags);
++}
++
++static unsigned long pba_clk_get_rate(struct clk *clk)
++{
++	unsigned long cksel, shift = 0;
++
++	cksel = pm_readl(CKSEL);
++	if (cksel & PM_BIT(PBADIV))
++		shift = PM_BFEXT(PBASEL, cksel) + 1;
++
++	return bus_clk_get_rate(clk, shift);
++}
++
++static void pbb_clk_mode(struct clk *clk, int enabled)
++{
++	unsigned long flags;
++	u32 mask;
++
++	spin_lock_irqsave(&pm_lock, flags);
++	mask = pm_readl(PBB_MASK);
++	if (enabled)
++		mask |= 1 << clk->index;
++	else
++		mask &= ~(1 << clk->index);
++	pm_writel(PBB_MASK, mask);
++	spin_unlock_irqrestore(&pm_lock, flags);
++}
++
++static unsigned long pbb_clk_get_rate(struct clk *clk)
++{
++	unsigned long cksel, shift = 0;
++
++	cksel = pm_readl(CKSEL);
++	if (cksel & PM_BIT(PBBDIV))
++		shift = PM_BFEXT(PBBSEL, cksel) + 1;
++
++	return bus_clk_get_rate(clk, shift);
++}
++
++static struct clk cpu_clk = {
++	.name		= "cpu",
++	.get_rate	= cpu_clk_get_rate,
++	.set_rate	= cpu_clk_set_rate,
++	.users		= 1,
++};
++static struct clk hsb_clk = {
++	.name		= "hsb",
++	.parent		= &cpu_clk,
++	.get_rate	= hsb_clk_get_rate,
++};
++static struct clk pba_clk = {
++	.name		= "pba",
++	.parent		= &hsb_clk,
++	.mode		= hsb_clk_mode,
++	.get_rate	= pba_clk_get_rate,
++	.index		= 1,
++};
++static struct clk pbb_clk = {
++	.name		= "pbb",
++	.parent		= &hsb_clk,
++	.mode		= hsb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.users		= 1,
++	.index		= 2,
++};
++
++/* --------------------------------------------------------------------
++ *  Generic Clock operations
++ * -------------------------------------------------------------------- */
++
++static void genclk_mode(struct clk *clk, int enabled)
++{
++	u32 control;
++
++	control = pm_readl(GCCTRL(clk->index));
++	if (enabled)
++		control |= PM_BIT(CEN);
++	else
++		control &= ~PM_BIT(CEN);
++	pm_writel(GCCTRL(clk->index), control);
++}
++
++static unsigned long genclk_get_rate(struct clk *clk)
++{
++	u32 control;
++	unsigned long div = 1;
++
++	control = pm_readl(GCCTRL(clk->index));
++	if (control & PM_BIT(DIVEN))
++		div = 2 * (PM_BFEXT(DIV, control) + 1);
++
++	return clk->parent->get_rate(clk->parent) / div;
++}
++
++static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
++{
++	u32 control;
++	unsigned long parent_rate, actual_rate, div;
++
++	parent_rate = clk->parent->get_rate(clk->parent);
++	control = pm_readl(GCCTRL(clk->index));
++
++	if (rate > 3 * parent_rate / 4) {
++		actual_rate = parent_rate;
++		control &= ~PM_BIT(DIVEN);
++	} else {
++		div = (parent_rate + rate) / (2 * rate) - 1;
++		control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
++		actual_rate = parent_rate / (2 * (div + 1));
++	}
++
++	dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
++		clk->name, rate, actual_rate);
++
++	if (apply)
++		pm_writel(GCCTRL(clk->index), control);
++
++	return actual_rate;
++}
++
++int genclk_set_parent(struct clk *clk, struct clk *parent)
++{
++	u32 control;
++
++	dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
++		clk->name, parent->name, clk->parent->name);
++
++	control = pm_readl(GCCTRL(clk->index));
++
++	if (parent == &osc1 || parent == &pll1)
++		control |= PM_BIT(OSCSEL);
++	else if (parent == &osc0 || parent == &pll0)
++		control &= ~PM_BIT(OSCSEL);
++	else
++		return -EINVAL;
++
++	if (parent == &pll0 || parent == &pll1)
++		control |= PM_BIT(PLLSEL);
++	else
++		control &= ~PM_BIT(PLLSEL);
++
++	pm_writel(GCCTRL(clk->index), control);
++	clk->parent = parent;
++
++	return 0;
++}
++
++static void __init genclk_init_parent(struct clk *clk)
++{
++	u32 control;
++	struct clk *parent;
++
++	BUG_ON(clk->index > 7);
++
++	control = pm_readl(GCCTRL(clk->index));
++	if (control & PM_BIT(OSCSEL))
++		parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
++	else
++		parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
++
++	clk->parent = parent;
++}
++
++/* --------------------------------------------------------------------
++ *  System peripherals
++ * -------------------------------------------------------------------- */
++static struct resource at32_pm0_resource[] = {
++	{
++		.start	= 0xfff00000,
++		.end	= 0xfff0007f,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(20),
++};
++
++static struct resource at32ap700x_rtc0_resource[] = {
++	{
++		.start	= 0xfff00080,
++		.end	= 0xfff000af,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(21),
++};
++
++static struct resource at32_wdt0_resource[] = {
++	{
++		.start	= 0xfff000b0,
++		.end	= 0xfff000cf,
++		.flags	= IORESOURCE_MEM,
++	},
++};
++
++static struct resource at32_eic0_resource[] = {
++	{
++		.start	= 0xfff00100,
++		.end	= 0xfff0013f,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(19),
++};
++
++DEFINE_DEV(at32_pm, 0);
++DEFINE_DEV(at32ap700x_rtc, 0);
++DEFINE_DEV(at32_wdt, 0);
++DEFINE_DEV(at32_eic, 0);
++
++/*
++ * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
++ * is always running.
++ */
++static struct clk at32_pm_pclk = {
++	.name		= "pclk",
++	.dev		= &at32_pm0_device.dev,
++	.parent		= &pbb_clk,
++	.mode		= pbb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.users		= 1,
++	.index		= 0,
++};
++
++static struct resource intc0_resource[] = {
++	PBMEM(0xfff00400),
++};
++struct platform_device at32_intc0_device = {
++	.name		= "intc",
++	.id		= 0,
++	.resource	= intc0_resource,
++	.num_resources	= ARRAY_SIZE(intc0_resource),
++};
++DEV_CLK(pclk, at32_intc0, pbb, 1);
++
++static struct clk ebi_clk = {
++	.name		= "ebi",
++	.parent		= &hsb_clk,
++	.mode		= hsb_clk_mode,
++	.get_rate	= hsb_clk_get_rate,
++	.users		= 1,
++};
++static struct clk hramc_clk = {
++	.name		= "hramc",
++	.parent		= &hsb_clk,
++	.mode		= hsb_clk_mode,
++	.get_rate	= hsb_clk_get_rate,
++	.users		= 1,
++	.index		= 3,
++};
++
++static struct resource smc0_resource[] = {
++	PBMEM(0xfff03400),
++};
++DEFINE_DEV(smc, 0);
++DEV_CLK(pclk, smc0, pbb, 13);
++DEV_CLK(mck, smc0, hsb, 0);
++
++static struct platform_device pdc_device = {
++	.name		= "pdc",
++	.id		= 0,
++};
++DEV_CLK(hclk, pdc, hsb, 4);
++DEV_CLK(pclk, pdc, pba, 16);
++
++static struct clk pico_clk = {
++	.name		= "pico",
++	.parent		= &cpu_clk,
++	.mode		= cpu_clk_mode,
++	.get_rate	= cpu_clk_get_rate,
++	.users		= 1,
++};
 +
- endmenu
- 
- endif # PLATFORM_AT32AP
-diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
-index a8b4450..250372a 100644
---- a/arch/avr32/mach-at32ap/Makefile
-+++ b/arch/avr32/mach-at32ap/Makefile
-@@ -2,3 +2,4 @@ obj-y				+= at32ap.o clock.o intc.o extint.o pio.o hsmc.o
- obj-$(CONFIG_CPU_AT32AP7000)	+= at32ap7000.o
- obj-$(CONFIG_CPU_AT32AP7000)	+= time-tc.o
- obj-$(CONFIG_CPU_FREQ_AT32AP)	+= cpufreq.o
-+obj-$(CONFIG_GPIO_DEV)		+= gpio-dev.o
-diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c
-index 64cc558..8375f89 100644
---- a/arch/avr32/mach-at32ap/at32ap7000.c
-+++ b/arch/avr32/mach-at32ap/at32ap7000.c
-@@ -25,12 +25,6 @@
- #include "pio.h"
- #include "pm.h"
- 
--/*
-- * We can reduce the code size a bit by using a constant here. Since
-- * this file is completely chip-specific, it's safe to not use
-- * ioremap. Generic drivers should of course never do this.
-- */
--#define AT32_PM_BASE	0xfff00000
- 
- #define PBMEM(base)					\
- 	{						\
-@@ -562,6 +556,17 @@ static struct clk pico_clk = {
- 	.users		= 1,
- };
- 
 +static struct resource dmaca0_resource[] = {
 +	{
 +		.start	= 0xff200000,
@@ -2649,91 +8873,765 @@ index 64cc558..8375f89 100644
 +DEFINE_DEV(dmaca, 0);
 +DEV_CLK(hclk, dmaca0, hsb, 10);
 +
- /* --------------------------------------------------------------------
-  * HMATRIX
-  * -------------------------------------------------------------------- */
-@@ -661,6 +666,7 @@ void __init at32_add_system_devices(void)
- 	platform_device_register(&at32_eic0_device);
- 	platform_device_register(&smc0_device);
- 	platform_device_register(&pdc_device);
++/* --------------------------------------------------------------------
++ * HMATRIX
++ * -------------------------------------------------------------------- */
++
++static struct clk hmatrix_clk = {
++	.name		= "hmatrix_clk",
++	.parent		= &pbb_clk,
++	.mode		= pbb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.index		= 2,
++	.users		= 1,
++};
++#define HMATRIX_BASE	((void __iomem *)0xfff00800)
++
++#define hmatrix_readl(reg)					\
++	__raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
++#define hmatrix_writel(reg,value)				\
++	__raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
++
++/*
++ * Set bits in the HMATRIX Special Function Register (SFR) used by the
++ * External Bus Interface (EBI). This can be used to enable special
++ * features like CompactFlash support, NAND Flash support, etc. on
++ * certain chipselects.
++ */
++static inline void set_ebi_sfr_bits(u32 mask)
++{
++	u32 sfr;
++
++	clk_enable(&hmatrix_clk);
++	sfr = hmatrix_readl(SFR4);
++	sfr |= mask;
++	hmatrix_writel(SFR4, sfr);
++	clk_disable(&hmatrix_clk);
++}
++
++/* --------------------------------------------------------------------
++ *  System Timer/Counter (TC)
++ * -------------------------------------------------------------------- */
++static struct resource at32_systc0_resource[] = {
++	PBMEM(0xfff00c00),
++	IRQ(22),
++};
++struct platform_device at32_systc0_device = {
++	.name		= "systc",
++	.id		= 0,
++	.resource	= at32_systc0_resource,
++	.num_resources	= ARRAY_SIZE(at32_systc0_resource),
++};
++DEV_CLK(pclk, at32_systc0, pbb, 3);
++
++/* --------------------------------------------------------------------
++ *  PIO
++ * -------------------------------------------------------------------- */
++
++static struct resource pio0_resource[] = {
++	PBMEM(0xffe02800),
++	IRQ(13),
++};
++DEFINE_DEV(pio, 0);
++DEV_CLK(mck, pio0, pba, 10);
++
++static struct resource pio1_resource[] = {
++	PBMEM(0xffe02c00),
++	IRQ(14),
++};
++DEFINE_DEV(pio, 1);
++DEV_CLK(mck, pio1, pba, 11);
++
++static struct resource pio2_resource[] = {
++	PBMEM(0xffe03000),
++	IRQ(15),
++};
++DEFINE_DEV(pio, 2);
++DEV_CLK(mck, pio2, pba, 12);
++
++static struct resource pio3_resource[] = {
++	PBMEM(0xffe03400),
++	IRQ(16),
++};
++DEFINE_DEV(pio, 3);
++DEV_CLK(mck, pio3, pba, 13);
++
++static struct resource pio4_resource[] = {
++	PBMEM(0xffe03800),
++	IRQ(17),
++};
++DEFINE_DEV(pio, 4);
++DEV_CLK(mck, pio4, pba, 14);
++
++void __init at32_add_system_devices(void)
++{
++	platform_device_register(&at32_pm0_device);
++	platform_device_register(&at32_intc0_device);
++	platform_device_register(&at32ap700x_rtc0_device);
++	platform_device_register(&at32_wdt0_device);
++	platform_device_register(&at32_eic0_device);
++	platform_device_register(&smc0_device);
++	platform_device_register(&pdc_device);
 +	platform_device_register(&dmaca0_device);
- 
- 	platform_device_register(&at32_systc0_device);
- 
-@@ -966,6 +972,83 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
- }
- 
- /* --------------------------------------------------------------------
-+ *  TWI
++
++	platform_device_register(&at32_systc0_device);
++
++	platform_device_register(&pio0_device);
++	platform_device_register(&pio1_device);
++	platform_device_register(&pio2_device);
++	platform_device_register(&pio3_device);
++	platform_device_register(&pio4_device);
++}
++
++/* --------------------------------------------------------------------
++ *  USART
 + * -------------------------------------------------------------------- */
 +
-+static struct resource atmel_twi0_resource[] = {
-+	PBMEM(0xffe00800),
-+	IRQ(5),
++static struct atmel_uart_data atmel_usart0_data = {
++	.use_dma_tx	= 1,
++	.use_dma_rx	= 1,
++};
++static struct resource atmel_usart0_resource[] = {
++	PBMEM(0xffe00c00),
++	IRQ(6),
++};
++DEFINE_DEV_DATA(atmel_usart, 0);
++DEV_CLK(usart, atmel_usart0, pba, 3);
++
++static struct atmel_uart_data atmel_usart1_data = {
++	.use_dma_tx	= 1,
++	.use_dma_rx	= 1,
++};
++static struct resource atmel_usart1_resource[] = {
++	PBMEM(0xffe01000),
++	IRQ(7),
++};
++DEFINE_DEV_DATA(atmel_usart, 1);
++DEV_CLK(usart, atmel_usart1, pba, 4);
++
++static struct atmel_uart_data atmel_usart2_data = {
++	.use_dma_tx	= 1,
++	.use_dma_rx	= 1,
++};
++static struct resource atmel_usart2_resource[] = {
++	PBMEM(0xffe01400),
++	IRQ(8),
++};
++DEFINE_DEV_DATA(atmel_usart, 2);
++DEV_CLK(usart, atmel_usart2, pba, 5);
++
++static struct atmel_uart_data atmel_usart3_data = {
++	.use_dma_tx	= 1,
++	.use_dma_rx	= 1,
++};
++static struct resource atmel_usart3_resource[] = {
++	PBMEM(0xffe01800),
++	IRQ(9),
++};
++DEFINE_DEV_DATA(atmel_usart, 3);
++DEV_CLK(usart, atmel_usart3, pba, 6);
++
++static inline void configure_usart0_pins(void)
++{
++	select_peripheral(PA(8),  PERIPH_B, 0);	/* RXD	*/
++	select_peripheral(PA(9),  PERIPH_B, 0);	/* TXD	*/
++}
++
++static inline void configure_usart1_pins(void)
++{
++	select_peripheral(PA(17), PERIPH_A, 0);	/* RXD	*/
++	select_peripheral(PA(18), PERIPH_A, 0);	/* TXD	*/
++}
++
++static inline void configure_usart2_pins(void)
++{
++	select_peripheral(PB(26), PERIPH_B, 0);	/* RXD	*/
++	select_peripheral(PB(27), PERIPH_B, 0);	/* TXD	*/
++}
++
++static inline void configure_usart3_pins(void)
++{
++	select_peripheral(PB(18), PERIPH_B, 0);	/* RXD	*/
++	select_peripheral(PB(17), PERIPH_B, 0);	/* TXD	*/
++}
++
++static struct platform_device *__initdata at32_usarts[4];
++
++void __init at32_map_usart(unsigned int hw_id, unsigned int line)
++{
++	struct platform_device *pdev;
++
++	switch (hw_id) {
++	case 0:
++		pdev = &atmel_usart0_device;
++		configure_usart0_pins();
++		break;
++	case 1:
++		pdev = &atmel_usart1_device;
++		configure_usart1_pins();
++		break;
++	case 2:
++		pdev = &atmel_usart2_device;
++		configure_usart2_pins();
++		break;
++	case 3:
++		pdev = &atmel_usart3_device;
++		configure_usart3_pins();
++		break;
++	default:
++		return;
++	}
++
++	if (PXSEG(pdev->resource[0].start) == P4SEG) {
++		/* Addresses in the P4 segment are permanently mapped 1:1 */
++		struct atmel_uart_data *data = pdev->dev.platform_data;
++		data->regs = (void __iomem *)pdev->resource[0].start;
++	}
++
++	pdev->id = line;
++	at32_usarts[line] = pdev;
++}
++
++struct platform_device *__init at32_add_device_usart(unsigned int id)
++{
++	platform_device_register(at32_usarts[id]);
++	return at32_usarts[id];
++}
++
++struct platform_device *atmel_default_console_device;
++
++void __init at32_setup_serial_console(unsigned int usart_id)
++{
++	atmel_default_console_device = at32_usarts[usart_id];
++}
++
++/* --------------------------------------------------------------------
++ *  Ethernet
++ * -------------------------------------------------------------------- */
++
++#ifdef CONFIG_CPU_AT32AP7000
++static struct eth_platform_data macb0_data;
++static struct resource macb0_resource[] = {
++	PBMEM(0xfff01800),
++	IRQ(25),
++};
++DEFINE_DEV_DATA(macb, 0);
++DEV_CLK(hclk, macb0, hsb, 8);
++DEV_CLK(pclk, macb0, pbb, 6);
++
++static struct eth_platform_data macb1_data;
++static struct resource macb1_resource[] = {
++	PBMEM(0xfff01c00),
++	IRQ(26),
 +};
-+DEFINE_DEV(atmel_twi, 0);
-+DEV_CLK(pclk,atmel_twi0,pba,2);
++DEFINE_DEV_DATA(macb, 1);
++DEV_CLK(hclk, macb1, hsb, 9);
++DEV_CLK(pclk, macb1, pbb, 7);
 +
 +struct platform_device *__init
-+at32_add_device_twi(unsigned int id)
++at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
 +{
 +	struct platform_device *pdev;
 +
 +	switch (id) {
 +	case 0:
-+		pdev = &atmel_twi0_device;
-+		select_peripheral(PA(6),  PERIPH_A, 0);	/* SDA	*/
-+		select_peripheral(PA(7),  PERIPH_A, 0);	/* SCL	*/
++		pdev = &macb0_device;
++
++		select_peripheral(PC(3),  PERIPH_A, 0);	/* TXD0	*/
++		select_peripheral(PC(4),  PERIPH_A, 0);	/* TXD1	*/
++		select_peripheral(PC(7),  PERIPH_A, 0);	/* TXEN	*/
++		select_peripheral(PC(8),  PERIPH_A, 0);	/* TXCK */
++		select_peripheral(PC(9),  PERIPH_A, 0);	/* RXD0	*/
++		select_peripheral(PC(10), PERIPH_A, 0);	/* RXD1	*/
++		select_peripheral(PC(13), PERIPH_A, 0);	/* RXER	*/
++		select_peripheral(PC(15), PERIPH_A, 0);	/* RXDV	*/
++		select_peripheral(PC(16), PERIPH_A, 0);	/* MDC	*/
++		select_peripheral(PC(17), PERIPH_A, 0);	/* MDIO	*/
++
++		if (!data->is_rmii) {
++			select_peripheral(PC(0),  PERIPH_A, 0);	/* COL	*/
++			select_peripheral(PC(1),  PERIPH_A, 0);	/* CRS	*/
++			select_peripheral(PC(2),  PERIPH_A, 0);	/* TXER	*/
++			select_peripheral(PC(5),  PERIPH_A, 0);	/* TXD2	*/
++			select_peripheral(PC(6),  PERIPH_A, 0);	/* TXD3 */
++			select_peripheral(PC(11), PERIPH_A, 0);	/* RXD2	*/
++			select_peripheral(PC(12), PERIPH_A, 0);	/* RXD3	*/
++			select_peripheral(PC(14), PERIPH_A, 0);	/* RXCK	*/
++			select_peripheral(PC(18), PERIPH_A, 0);	/* SPD	*/
++		}
++		break;
++
++	case 1:
++		pdev = &macb1_device;
++
++		select_peripheral(PD(13), PERIPH_B, 0);		/* TXD0	*/
++		select_peripheral(PD(14), PERIPH_B, 0);		/* TXD1	*/
++		select_peripheral(PD(11), PERIPH_B, 0);		/* TXEN	*/
++		select_peripheral(PD(12), PERIPH_B, 0);		/* TXCK */
++		select_peripheral(PD(10), PERIPH_B, 0);		/* RXD0	*/
++		select_peripheral(PD(6),  PERIPH_B, 0);		/* RXD1	*/
++		select_peripheral(PD(5),  PERIPH_B, 0);		/* RXER	*/
++		select_peripheral(PD(4),  PERIPH_B, 0);		/* RXDV	*/
++		select_peripheral(PD(3),  PERIPH_B, 0);		/* MDC	*/
++		select_peripheral(PD(2),  PERIPH_B, 0);		/* MDIO	*/
++
++		if (!data->is_rmii) {
++			select_peripheral(PC(19), PERIPH_B, 0);	/* COL	*/
++			select_peripheral(PC(23), PERIPH_B, 0);	/* CRS	*/
++			select_peripheral(PC(26), PERIPH_B, 0);	/* TXER	*/
++			select_peripheral(PC(27), PERIPH_B, 0);	/* TXD2	*/
++			select_peripheral(PC(28), PERIPH_B, 0);	/* TXD3 */
++			select_peripheral(PC(29), PERIPH_B, 0);	/* RXD2	*/
++			select_peripheral(PC(30), PERIPH_B, 0);	/* RXD3	*/
++			select_peripheral(PC(24), PERIPH_B, 0);	/* RXCK	*/
++			select_peripheral(PD(15), PERIPH_B, 0);	/* SPD	*/
++		}
 +		break;
 +
 +	default:
 +		return NULL;
 +	}
 +
++	memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data));
 +	platform_device_register(pdev);
++
 +	return pdev;
 +}
++#endif
 +
 +/* --------------------------------------------------------------------
-+ * MMC
++ *  SPI
 + * -------------------------------------------------------------------- */
-+static struct mci_platform_data atmel_mci0_data = {
-+	.detect_pin	= GPIO_PIN_NONE,
-+	.wp_pin		= GPIO_PIN_NONE,
++static struct resource atmel_spi0_resource[] = {
++	PBMEM(0xffe00000),
++	IRQ(3),
 +};
-+static struct resource atmel_mci0_resource[] = {
-+	PBMEM(0xfff02400),
-+	IRQ(28),
++DEFINE_DEV(atmel_spi, 0);
++DEV_CLK(spi_clk, atmel_spi0, pba, 0);
++
++static struct resource atmel_spi1_resource[] = {
++	PBMEM(0xffe00400),
++	IRQ(4),
 +};
-+DEFINE_DEV_DATA(atmel_mci, 0);
-+DEV_CLK(mci_clk, atmel_mci0, pbb, 9);
++DEFINE_DEV(atmel_spi, 1);
++DEV_CLK(spi_clk, atmel_spi1, pba, 1);
++
++static void __init
++at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
++		      unsigned int n, const u8 *pins)
++{
++	unsigned int pin, mode;
++
++	for (; n; n--, b++) {
++		b->bus_num = bus_num;
++		if (b->chip_select >= 4)
++			continue;
++		pin = (unsigned)b->controller_data;
++		if (!pin) {
++			pin = pins[b->chip_select];
++			b->controller_data = (void *)pin;
++		}
++		mode = AT32_GPIOF_OUTPUT;
++		if (!(b->mode & SPI_CS_HIGH))
++			mode |= AT32_GPIOF_HIGH;
++		at32_select_gpio(pin, mode);
++	}
++}
 +
 +struct platform_device *__init
-+at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
++at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
 +{
++	/*
++	 * Manage the chipselects as GPIOs, normally using the same pins
++	 * the SPI controller expects; but boards can use other pins.
++	 */
++	static u8 __initdata spi0_pins[] =
++		{ GPIO_PIN_PA(3), GPIO_PIN_PA(4),
++		  GPIO_PIN_PA(5), GPIO_PIN_PA(20), };
++	static u8 __initdata spi1_pins[] =
++		{ GPIO_PIN_PB(2), GPIO_PIN_PB(3),
++		  GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
 +	struct platform_device *pdev;
 +
 +	switch (id) {
 +	case 0:
-+		pdev = &atmel_mci0_device;
-+		select_peripheral(PA(10), PERIPH_A, 0);	/* CLK	 */
-+		select_peripheral(PA(11), PERIPH_A, 0);	/* CMD	 */
-+		select_peripheral(PA(12), PERIPH_A, 0);	/* DATA0 */
-+		select_peripheral(PA(13), PERIPH_A, 0);	/* DATA1 */
-+		select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
-+		select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
++		pdev = &atmel_spi0_device;
++		select_peripheral(PA(0),  PERIPH_A, 0);	/* MISO	 */
++		select_peripheral(PA(1),  PERIPH_A, 0);	/* MOSI	 */
++		select_peripheral(PA(2),  PERIPH_A, 0);	/* SCK	 */
++		at32_spi_setup_slaves(0, b, n, spi0_pins);
++		break;
++
++	case 1:
++		pdev = &atmel_spi1_device;
++		select_peripheral(PB(0),  PERIPH_B, 0);	/* MISO  */
++		select_peripheral(PB(1),  PERIPH_B, 0);	/* MOSI  */
++		select_peripheral(PB(5),  PERIPH_B, 0);	/* SCK   */
++		at32_spi_setup_slaves(1, b, n, spi1_pins);
 +		break;
++
 +	default:
 +		return NULL;
 +	}
 +
++	spi_register_board_info(b, n);
++	platform_device_register(pdev);
++	return pdev;
++}
++
++/* --------------------------------------------------------------------
++ *  TWI
++ * -------------------------------------------------------------------- */
++static struct resource atmel_twi0_resource[] __initdata = {
++	PBMEM(0xffe00800),
++	IRQ(5),
++};
++static struct clk atmel_twi0_pclk = {
++	.name		= "twi_pclk",
++	.parent		= &pba_clk,
++	.mode		= pba_clk_mode,
++	.get_rate	= pba_clk_get_rate,
++	.index		= 2,
++};
++
++struct platform_device *__init at32_add_device_twi(unsigned int id)
++{
++	struct platform_device *pdev;
++
++	if (id != 0)
++		return NULL;
++
++	pdev = platform_device_alloc("atmel_twi", id);
++	if (!pdev)
++		return NULL;
++
++	if (platform_device_add_resources(pdev, atmel_twi0_resource,
++				ARRAY_SIZE(atmel_twi0_resource)))
++		goto err_add_resources;
++
++	select_peripheral(PA(6),  PERIPH_A, 0);	/* SDA	*/
++	select_peripheral(PA(7),  PERIPH_A, 0);	/* SDL	*/
++
++	atmel_twi0_pclk.dev = &pdev->dev;
++
++	platform_device_add(pdev);
++	return pdev;
++
++err_add_resources:
++	platform_device_put(pdev);
++	return NULL;
++}
++
++/* --------------------------------------------------------------------
++ * MMC
++ * -------------------------------------------------------------------- */
++static struct resource atmel_mci0_resource[] __initdata = {
++	PBMEM(0xfff02400),
++	IRQ(28),
++};
++static struct clk atmel_mci0_pclk = {
++	.name		= "mci_clk",
++	.parent		= &pbb_clk,
++	.mode		= pbb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.index		= 9,
++};
++
++struct platform_device *__init
++at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
++{
++	struct platform_device *pdev;
++
++	if (id != 0)
++		return NULL;
++
++	pdev = platform_device_alloc("atmel_mci", id);
++	if (!pdev)
++		goto fail;
++
++	if (platform_device_add_resources(pdev, atmel_mci0_resource,
++				ARRAY_SIZE(atmel_mci0_resource)))
++		goto fail;
++
++	if (data && platform_device_add_data(pdev, data,
++				sizeof(struct mci_platform_data)))
++		goto fail;
++
++	select_peripheral(PA(10), PERIPH_A, 0);	/* CLK	 */
++	select_peripheral(PA(11), PERIPH_A, 0);	/* CMD	 */
++	select_peripheral(PA(12), PERIPH_A, 0);	/* DATA0 */
++	select_peripheral(PA(13), PERIPH_A, 0);	/* DATA1 */
++	select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
++	select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
++
 +	if (data) {
 +		if (data->detect_pin != GPIO_PIN_NONE)
 +			at32_select_gpio(data->detect_pin, 0);
 +		if (data->wp_pin != GPIO_PIN_NONE)
 +			at32_select_gpio(data->wp_pin, 0);
-+		memcpy(pdev->dev.platform_data, data,
-+		       sizeof(struct mci_platform_data));
++	}
++
++	atmel_mci0_pclk.dev = &pdev->dev;
++
++	platform_device_add(pdev);
++	return pdev;
++
++fail:
++	platform_device_put(pdev);
++	return NULL;
++}
++
++/* --------------------------------------------------------------------
++ *  LCDC
++ * -------------------------------------------------------------------- */
++#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
++static struct atmel_lcdfb_info atmel_lcdfb0_data;
++static struct resource atmel_lcdfb0_resource[] = {
++	{
++		.start		= 0xff000000,
++		.end		= 0xff000fff,
++		.flags		= IORESOURCE_MEM,
++	},
++	IRQ(1),
++	{
++		/* Placeholder for pre-allocated fb memory */
++		.start		= 0x00000000,
++		.end		= 0x00000000,
++		.flags		= 0,
++	},
++};
++DEFINE_DEV_DATA(atmel_lcdfb, 0);
++DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
++static struct clk atmel_lcdfb0_pixclk = {
++	.name		= "lcdc_clk",
++	.dev		= &atmel_lcdfb0_device.dev,
++	.mode		= genclk_mode,
++	.get_rate	= genclk_get_rate,
++	.set_rate	= genclk_set_rate,
++	.set_parent	= genclk_set_parent,
++	.index		= 7,
++};
++
++struct platform_device *__init
++at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
++		     unsigned long fbmem_start, unsigned long fbmem_len)
++{
++	struct platform_device *pdev;
++	struct atmel_lcdfb_info *info;
++	struct fb_monspecs *monspecs;
++	struct fb_videomode *modedb;
++	unsigned int modedb_size;
++
++	/*
++	 * Do a deep copy of the fb data, monspecs and modedb. Make
++	 * sure all allocations are done before setting up the
++	 * portmux.
++	 */
++	monspecs = kmemdup(data->default_monspecs,
++			   sizeof(struct fb_monspecs), GFP_KERNEL);
++	if (!monspecs)
++		return NULL;
++
++	modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len;
++	modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL);
++	if (!modedb)
++		goto err_dup_modedb;
++	monspecs->modedb = modedb;
++
++	switch (id) {
++	case 0:
++		pdev = &atmel_lcdfb0_device;
++		select_peripheral(PC(19), PERIPH_A, 0);	/* CC	  */
++		select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
++		select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
++		select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
++		select_peripheral(PC(23), PERIPH_A, 0);	/* DVAL	  */
++		select_peripheral(PC(24), PERIPH_A, 0);	/* MODE	  */
++		select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
++		select_peripheral(PC(26), PERIPH_A, 0);	/* DATA0  */
++		select_peripheral(PC(27), PERIPH_A, 0);	/* DATA1  */
++		select_peripheral(PC(28), PERIPH_A, 0);	/* DATA2  */
++		select_peripheral(PC(29), PERIPH_A, 0);	/* DATA3  */
++		select_peripheral(PC(30), PERIPH_A, 0);	/* DATA4  */
++		select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
++		select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
++		select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
++		select_peripheral(PD(2),  PERIPH_A, 0);	/* DATA8  */
++		select_peripheral(PD(3),  PERIPH_A, 0);	/* DATA9  */
++		select_peripheral(PD(4),  PERIPH_A, 0);	/* DATA10 */
++		select_peripheral(PD(5),  PERIPH_A, 0);	/* DATA11 */
++		select_peripheral(PD(6),  PERIPH_A, 0);	/* DATA12 */
++		select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
++		select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
++		select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
++		select_peripheral(PD(10), PERIPH_A, 0);	/* DATA16 */
++		select_peripheral(PD(11), PERIPH_A, 0);	/* DATA17 */
++		select_peripheral(PD(12), PERIPH_A, 0);	/* DATA18 */
++		select_peripheral(PD(13), PERIPH_A, 0);	/* DATA19 */
++		select_peripheral(PD(14), PERIPH_A, 0);	/* DATA20 */
++		select_peripheral(PD(15), PERIPH_A, 0);	/* DATA21 */
++		select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
++		select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
++
++		clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
++		clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
++		break;
++
++	default:
++		goto err_invalid_id;
++	}
++
++	if (fbmem_len) {
++		pdev->resource[2].start = fbmem_start;
++		pdev->resource[2].end = fbmem_start + fbmem_len - 1;
++		pdev->resource[2].flags = IORESOURCE_MEM;
++	}
++
++	info = pdev->dev.platform_data;
++	memcpy(info, data, sizeof(struct atmel_lcdfb_info));
++	info->default_monspecs = monspecs;
++
++	platform_device_register(pdev);
++	return pdev;
++
++err_invalid_id:
++	kfree(modedb);
++err_dup_modedb:
++	kfree(monspecs);
++	return NULL;
++}
++#endif
++
++/* --------------------------------------------------------------------
++ *  PWM
++ * -------------------------------------------------------------------- */
++static struct resource atmel_pwm0_resource[] __initdata = {
++	PBMEM(0xfff01400),
++	IRQ(24),
++};
++static struct clk atmel_pwm0_mck = {
++	.name		= "mck",
++	.parent		= &pbb_clk,
++	.mode		= pbb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.index		= 5,
++};
++
++struct platform_device *__init at32_add_device_pwm(u32 mask)
++{
++	struct platform_device *pdev;
++
++	if (!mask)
++		return NULL;
++
++	pdev = platform_device_alloc("atmel_pwm", 0);
++	if (!pdev)
++		return NULL;
++
++	if (platform_device_add_resources(pdev, atmel_pwm0_resource,
++				ARRAY_SIZE(atmel_pwm0_resource)))
++		goto out_free_pdev;
++
++	if (platform_device_add_data(pdev, &mask, sizeof(mask)))
++		goto out_free_pdev;
++
++	if (mask & (1 << 0))
++		select_peripheral(PA(28), PERIPH_A, 0);
++	if (mask & (1 << 1))
++		select_peripheral(PA(29), PERIPH_A, 0);
++	if (mask & (1 << 2))
++		select_peripheral(PA(21), PERIPH_B, 0);
++	if (mask & (1 << 3))
++		select_peripheral(PA(22), PERIPH_B, 0);
++
++	atmel_pwm0_mck.dev = &pdev->dev;
++
++	platform_device_add(pdev);
++
++	return pdev;
++
++out_free_pdev:
++	platform_device_put(pdev);
++	return NULL;
++}
++
++/* --------------------------------------------------------------------
++ *  SSC
++ * -------------------------------------------------------------------- */
++static struct resource ssc0_resource[] = {
++	PBMEM(0xffe01c00),
++	IRQ(10),
++};
++DEFINE_DEV(ssc, 0);
++DEV_CLK(pclk, ssc0, pba, 7);
++
++static struct resource ssc1_resource[] = {
++	PBMEM(0xffe02000),
++	IRQ(11),
++};
++DEFINE_DEV(ssc, 1);
++DEV_CLK(pclk, ssc1, pba, 8);
++
++static struct resource ssc2_resource[] = {
++	PBMEM(0xffe02400),
++	IRQ(12),
++};
++DEFINE_DEV(ssc, 2);
++DEV_CLK(pclk, ssc2, pba, 9);
++
++struct platform_device *__init
++at32_add_device_ssc(unsigned int id, unsigned int flags)
++{
++	struct platform_device *pdev;
++
++	switch (id) {
++	case 0:
++		pdev = &ssc0_device;
++		if (flags & ATMEL_SSC_RF)
++			select_peripheral(PA(21), PERIPH_A, 0);	/* RF */
++		if (flags & ATMEL_SSC_RK)
++			select_peripheral(PA(22), PERIPH_A, 0);	/* RK */
++		if (flags & ATMEL_SSC_TK)
++			select_peripheral(PA(23), PERIPH_A, 0);	/* TK */
++		if (flags & ATMEL_SSC_TF)
++			select_peripheral(PA(24), PERIPH_A, 0);	/* TF */
++		if (flags & ATMEL_SSC_TD)
++			select_peripheral(PA(25), PERIPH_A, 0);	/* TD */
++		if (flags & ATMEL_SSC_RD)
++			select_peripheral(PA(26), PERIPH_A, 0);	/* RD */
++		break;
++	case 1:
++		pdev = &ssc1_device;
++		if (flags & ATMEL_SSC_RF)
++			select_peripheral(PA(0), PERIPH_B, 0);	/* RF */
++		if (flags & ATMEL_SSC_RK)
++			select_peripheral(PA(1), PERIPH_B, 0);	/* RK */
++		if (flags & ATMEL_SSC_TK)
++			select_peripheral(PA(2), PERIPH_B, 0);	/* TK */
++		if (flags & ATMEL_SSC_TF)
++			select_peripheral(PA(3), PERIPH_B, 0);	/* TF */
++		if (flags & ATMEL_SSC_TD)
++			select_peripheral(PA(4), PERIPH_B, 0);	/* TD */
++		if (flags & ATMEL_SSC_RD)
++			select_peripheral(PA(5), PERIPH_B, 0);	/* RD */
++		break;
++	case 2:
++		pdev = &ssc2_device;
++		if (flags & ATMEL_SSC_TD)
++			select_peripheral(PB(13), PERIPH_A, 0);	/* TD */
++		if (flags & ATMEL_SSC_RD)
++			select_peripheral(PB(14), PERIPH_A, 0);	/* RD */
++		if (flags & ATMEL_SSC_TK)
++			select_peripheral(PB(15), PERIPH_A, 0);	/* TK */
++		if (flags & ATMEL_SSC_TF)
++			select_peripheral(PB(16), PERIPH_A, 0);	/* TF */
++		if (flags & ATMEL_SSC_RF)
++			select_peripheral(PB(17), PERIPH_A, 0);	/* RF */
++		if (flags & ATMEL_SSC_RK)
++			select_peripheral(PB(18), PERIPH_A, 0);	/* RK */
++		break;
++	default:
++		return NULL;
 +	}
 +
 +	platform_device_register(pdev);
@@ -2741,13 +9639,6 @@ index 64cc558..8375f89 100644
 +}
 +
 +/* --------------------------------------------------------------------
-  *  LCDC
-  * -------------------------------------------------------------------- */
- static struct atmel_lcdfb_info atmel_lcdfb0_data;
-@@ -1168,6 +1251,143 @@ at32_add_device_ssc(unsigned int id, unsigned int flags)
- }
- 
- /* --------------------------------------------------------------------
 + *  USB Device Controller
 + * -------------------------------------------------------------------- */
 +static struct resource usba0_resource[] __initdata = {
@@ -2814,239 +9705,538 @@ index 64cc558..8375f89 100644
 +}
 +
 +/* --------------------------------------------------------------------
-+ *  AC97C
++ * IDE / CompactFlash
 + * -------------------------------------------------------------------- */
-+static struct resource atmel_ac97c0_resource[] = {
++#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7001)
++static struct resource at32_smc_cs4_resource[] __initdata = {
++	{
++		.start	= 0x04000000,
++		.end	= 0x07ffffff,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(~0UL), /* Magic IRQ will be overridden */
++};
++static struct resource at32_smc_cs5_resource[] __initdata = {
++	{
++		.start	= 0x20000000,
++		.end	= 0x23ffffff,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(~0UL), /* Magic IRQ will be overridden */
++};
++
++static int __init at32_init_ide_or_cf(struct platform_device *pdev,
++		unsigned int cs, unsigned int extint)
++{
++	static unsigned int extint_pin_map[4] __initdata = {
++		GPIO_PIN_PB(25),
++		GPIO_PIN_PB(26),
++		GPIO_PIN_PB(27),
++		GPIO_PIN_PB(28),
++	};
++	static bool common_pins_initialized __initdata = false;
++	unsigned int extint_pin;
++	int ret;
++
++	if (extint >= ARRAY_SIZE(extint_pin_map))
++		return -EINVAL;
++	extint_pin = extint_pin_map[extint];
++
++	switch (cs) {
++	case 4:
++		ret = platform_device_add_resources(pdev,
++				at32_smc_cs4_resource,
++				ARRAY_SIZE(at32_smc_cs4_resource));
++		if (ret)
++			return ret;
++
++		select_peripheral(PE(21), PERIPH_A, 0); /* NCS4   -> OE_N  */
++		set_ebi_sfr_bits(HMATRIX_BIT(CS4A));
++		break;
++	case 5:
++		ret = platform_device_add_resources(pdev,
++				at32_smc_cs5_resource,
++				ARRAY_SIZE(at32_smc_cs5_resource));
++		if (ret)
++			return ret;
++
++		select_peripheral(PE(22), PERIPH_A, 0); /* NCS5   -> OE_N  */
++		set_ebi_sfr_bits(HMATRIX_BIT(CS5A));
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	if (!common_pins_initialized) {
++		select_peripheral(PE(19), PERIPH_A, 0);	/* CFCE1  -> CS0_N */
++		select_peripheral(PE(20), PERIPH_A, 0);	/* CFCE2  -> CS1_N */
++		select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW  -> DIR   */
++		select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT  <- IORDY */
++		common_pins_initialized = true;
++	}
++
++	at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
++
++	pdev->resource[1].start = EIM_IRQ_BASE + extint;
++	pdev->resource[1].end = pdev->resource[1].start;
++
++	return 0;
++}
++
++struct platform_device *__init
++at32_add_device_ide(unsigned int id, unsigned int extint,
++		    struct ide_platform_data *data)
++{
++	struct platform_device *pdev;
++
++	pdev = platform_device_alloc("at32_ide", id);
++	if (!pdev)
++		goto fail;
++
++	if (platform_device_add_data(pdev, data,
++				sizeof(struct ide_platform_data)))
++		goto fail;
++
++	if (at32_init_ide_or_cf(pdev, data->cs, extint))
++		goto fail;
++
++	platform_device_add(pdev);
++	return pdev;
++
++fail:
++	platform_device_put(pdev);
++	return NULL;
++}
++
++struct platform_device *__init
++at32_add_device_cf(unsigned int id, unsigned int extint,
++		    struct cf_platform_data *data)
++{
++	struct platform_device *pdev;
++
++	pdev = platform_device_alloc("at32_cf", id);
++	if (!pdev)
++		goto fail;
++
++	if (platform_device_add_data(pdev, data,
++				sizeof(struct cf_platform_data)))
++		goto fail;
++
++	if (at32_init_ide_or_cf(pdev, data->cs, extint))
++		goto fail;
++
++	if (data->detect_pin != GPIO_PIN_NONE)
++		at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH);
++	if (data->reset_pin != GPIO_PIN_NONE)
++		at32_select_gpio(data->reset_pin, 0);
++	if (data->vcc_pin != GPIO_PIN_NONE)
++		at32_select_gpio(data->vcc_pin, 0);
++	/* READY is used as extint, so we can't select it as gpio */
++
++	platform_device_add(pdev);
++	return pdev;
++
++fail:
++	platform_device_put(pdev);
++	return NULL;
++}
++#endif
++
++/* --------------------------------------------------------------------
++ * AC97C
++ * -------------------------------------------------------------------- */
++static struct resource atmel_ac97c0_resource[] __initdata = {
 +	PBMEM(0xfff02800),
 +	IRQ(29),
 +};
-+DEFINE_DEV(atmel_ac97c, 0);
-+DEV_CLK(pclk, atmel_ac97c0, pbb, 10);
++static struct clk atmel_ac97c0_pclk = {
++	.name		= "pclk",
++	.parent		= &pbb_clk,
++	.mode		= pbb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.index		= 10,
++};
 +
-+struct platform_device *__init
-+at32_add_device_ac97c(unsigned int id)
++struct platform_device *__init at32_add_device_ac97c(unsigned int id)
 +{
 +	struct platform_device *pdev;
 +
-+	switch (id) {
-+	case 0:
-+		pdev = &atmel_ac97c0_device;
-+		select_peripheral(PB(20), PERIPH_B, 0);	/* SYNC	*/
-+		select_peripheral(PB(21), PERIPH_B, 0);	/* SDO	*/
-+		select_peripheral(PB(22), PERIPH_B, 0);	/* SDI	*/
-+		select_peripheral(PB(23), PERIPH_B, 0);	/* SCLK	*/
-+		break;
-+	default:
++	if (id != 0)
 +		return NULL;
-+	}
 +
-+	platform_device_register(pdev);
++	pdev = platform_device_alloc("atmel_ac97c", id);
++	if (!pdev)
++		return NULL;
++
++	if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
++				ARRAY_SIZE(atmel_ac97c0_resource)))
++		goto err_add_resources;
++
++	select_peripheral(PB(20), PERIPH_B, 0);	/* SYNC	*/
++	select_peripheral(PB(21), PERIPH_B, 0);	/* SDO	*/
++	select_peripheral(PB(22), PERIPH_B, 0);	/* SDI	*/
++	select_peripheral(PB(23), PERIPH_B, 0);	/* SCLK	*/
++
++	atmel_ac97c0_pclk.dev = &pdev->dev;
++
++	platform_device_add(pdev);
 +	return pdev;
++
++err_add_resources:
++	platform_device_put(pdev);
++	return NULL;
 +}
 +
 +/* --------------------------------------------------------------------
-+ *  DAC
++ * ABDAC
 + * -------------------------------------------------------------------- */
-+static struct resource abdac0_resource[] = {
++static struct resource abdac0_resource[] __initdata = {
 +	PBMEM(0xfff02000),
 +	IRQ(27),
 +};
-+DEFINE_DEV(abdac, 0);
-+DEV_CLK(pclk, abdac0, pbb, 8);
++static struct clk abdac0_pclk = {
++	.name		= "pclk",
++	.parent		= &pbb_clk,
++	.mode		= pbb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.index		= 8,
++};
 +static struct clk abdac0_sample_clk = {
-+	.name           = "sample_clk",
-+	.dev            = &abdac0_device.dev,
-+	.mode           = genclk_mode,
-+	.get_rate       = genclk_get_rate,
-+	.set_rate       = genclk_set_rate,
-+	.set_parent     = genclk_set_parent,
-+	.index          = 6,
++	.name		= "sample_clk",
++	.mode		= genclk_mode,
++	.get_rate	= genclk_get_rate,
++	.set_rate	= genclk_set_rate,
++	.set_parent	= genclk_set_parent,
++	.index		= 6,
 +};
 +
-+struct platform_device *__init
-+at32_add_device_abdac(unsigned int id)
++struct platform_device *__init at32_add_device_abdac(unsigned int id)
 +{
 +	struct platform_device *pdev;
 +
-+	switch (id) {
-+	case 0:
-+		pdev = &abdac0_device;
-+		select_peripheral(PB(20), PERIPH_A, 0);	/* DATA1	*/
-+		select_peripheral(PB(21), PERIPH_A, 0);	/* DATA0	*/
-+		select_peripheral(PB(22), PERIPH_A, 0);	/* DATAN1	*/
-+		select_peripheral(PB(23), PERIPH_A, 0);	/* DATAN0	*/
-+		break;
-+	default:
++	if (id != 0)
 +		return NULL;
-+	}
 +
-+	platform_device_register(pdev);
++	pdev = platform_device_alloc("abdac", id);
++	if (!pdev)
++		return NULL;
++
++	if (platform_device_add_resources(pdev, abdac0_resource,
++				ARRAY_SIZE(abdac0_resource)))
++		goto err_add_resources;
++
++	select_peripheral(PB(20), PERIPH_A, 0);	/* DATA1	*/
++	select_peripheral(PB(21), PERIPH_A, 0);	/* DATA0	*/
++	select_peripheral(PB(22), PERIPH_A, 0);	/* DATAN1	*/
++	select_peripheral(PB(23), PERIPH_A, 0);	/* DATAN0	*/
++
++	abdac0_pclk.dev = &pdev->dev;
++	abdac0_sample_clk.dev = &pdev->dev;
++
++	platform_device_add(pdev);
 +	return pdev;
++
++err_add_resources:
++	platform_device_put(pdev);
++	return NULL;
 +}
 +
 +/* --------------------------------------------------------------------
-  *  GCLK
-  * -------------------------------------------------------------------- */
- static struct clk gclk0 = {
-@@ -1230,6 +1450,7 @@ struct clk *at32_clock_list[] = {
- 	&smc0_mck,
- 	&pdc_hclk,
- 	&pdc_pclk,
++ *  GCLK
++ * -------------------------------------------------------------------- */
++static struct clk gclk0 = {
++	.name		= "gclk0",
++	.mode		= genclk_mode,
++	.get_rate	= genclk_get_rate,
++	.set_rate	= genclk_set_rate,
++	.set_parent	= genclk_set_parent,
++	.index		= 0,
++};
++static struct clk gclk1 = {
++	.name		= "gclk1",
++	.mode		= genclk_mode,
++	.get_rate	= genclk_get_rate,
++	.set_rate	= genclk_set_rate,
++	.set_parent	= genclk_set_parent,
++	.index		= 1,
++};
++static struct clk gclk2 = {
++	.name		= "gclk2",
++	.mode		= genclk_mode,
++	.get_rate	= genclk_get_rate,
++	.set_rate	= genclk_set_rate,
++	.set_parent	= genclk_set_parent,
++	.index		= 2,
++};
++static struct clk gclk3 = {
++	.name		= "gclk3",
++	.mode		= genclk_mode,
++	.get_rate	= genclk_get_rate,
++	.set_rate	= genclk_set_rate,
++	.set_parent	= genclk_set_parent,
++	.index		= 3,
++};
++static struct clk gclk4 = {
++	.name		= "gclk4",
++	.mode		= genclk_mode,
++	.get_rate	= genclk_get_rate,
++	.set_rate	= genclk_set_rate,
++	.set_parent	= genclk_set_parent,
++	.index		= 4,
++};
++
++struct clk *at32_clock_list[] = {
++	&osc32k,
++	&osc0,
++	&osc1,
++	&pll0,
++	&pll1,
++	&cpu_clk,
++	&hsb_clk,
++	&pba_clk,
++	&pbb_clk,
++	&at32_pm_pclk,
++	&at32_intc0_pclk,
++	&hmatrix_clk,
++	&ebi_clk,
++	&hramc_clk,
++	&smc0_pclk,
++	&smc0_mck,
++	&pdc_hclk,
++	&pdc_pclk,
 +	&dmaca0_hclk,
- 	&pico_clk,
- 	&pio0_mck,
- 	&pio1_mck,
-@@ -1247,11 +1468,18 @@ struct clk *at32_clock_list[] = {
- 	&macb1_pclk,
- 	&atmel_spi0_spi_clk,
- 	&atmel_spi1_spi_clk,
++	&pico_clk,
++	&pio0_mck,
++	&pio1_mck,
++	&pio2_mck,
++	&pio3_mck,
++	&pio4_mck,
++	&at32_systc0_pclk,
++	&atmel_usart0_usart,
++	&atmel_usart1_usart,
++	&atmel_usart2_usart,
++	&atmel_usart3_usart,
++	&atmel_pwm0_mck,
++#if defined(CONFIG_CPU_AT32AP7000)
++	&macb0_hclk,
++	&macb0_pclk,
++	&macb1_hclk,
++	&macb1_pclk,
++#endif
++	&atmel_spi0_spi_clk,
++	&atmel_spi1_spi_clk,
 +	&atmel_twi0_pclk,
-+	&atmel_mci0_mci_clk,
- 	&atmel_lcdfb0_hck1,
- 	&atmel_lcdfb0_pixclk,
- 	&ssc0_pclk,
- 	&ssc1_pclk,
- 	&ssc2_pclk,
++	&atmel_mci0_pclk,
++#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
++	&atmel_lcdfb0_hck1,
++	&atmel_lcdfb0_pixclk,
++#endif
++	&ssc0_pclk,
++	&ssc1_pclk,
++	&ssc2_pclk,
 +	&usba0_hclk,
 +	&usba0_pclk,
 +	&atmel_ac97c0_pclk,
 +	&abdac0_pclk,
 +	&abdac0_sample_clk,
- 	&gclk0,
- 	&gclk1,
- 	&gclk2,
-@@ -1293,6 +1521,7 @@ void __init at32_clock_init(void)
- 	genclk_init_parent(&gclk3);
- 	genclk_init_parent(&gclk4);
- 	genclk_init_parent(&atmel_lcdfb0_pixclk);
-+	genclk_init_parent(&abdac0_sample_clk);
- 
- 	/*
- 	 * Turn on all clocks that have at least one user already, and
-diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c
-index 0f8c89c..4642117 100644
---- a/arch/avr32/mach-at32ap/clock.c
-+++ b/arch/avr32/mach-at32ap/clock.c
-@@ -150,3 +150,119 @@ struct clk *clk_get_parent(struct clk *clk)
- 	return clk->parent;
- }
- EXPORT_SYMBOL(clk_get_parent);
++	&gclk0,
++	&gclk1,
++	&gclk2,
++	&gclk3,
++	&gclk4,
++};
++unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
 +
++void __init at32_portmux_init(void)
++{
++	at32_init_pio(&pio0_device);
++	at32_init_pio(&pio1_device);
++	at32_init_pio(&pio2_device);
++	at32_init_pio(&pio3_device);
++	at32_init_pio(&pio4_device);
++}
 +
++void __init at32_clock_init(void)
++{
++	u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
++	int i;
 +
-+#ifdef CONFIG_DEBUG_FS
++	if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
++		main_clock = &pll0;
++		cpu_clk.parent = &pll0;
++	} else {
++		main_clock = &osc0;
++		cpu_clk.parent = &osc0;
++	}
 +
-+/* /sys/kernel/debug/at32ap_clk */
++	if (pm_readl(PLL0) & PM_BIT(PLLOSC))
++		pll0.parent = &osc1;
++	if (pm_readl(PLL1) & PM_BIT(PLLOSC))
++		pll1.parent = &osc1;
++
++	genclk_init_parent(&gclk0);
++	genclk_init_parent(&gclk1);
++	genclk_init_parent(&gclk2);
++	genclk_init_parent(&gclk3);
++	genclk_init_parent(&gclk4);
++#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
++	genclk_init_parent(&atmel_lcdfb0_pixclk);
++#endif
++	genclk_init_parent(&abdac0_sample_clk);
 +
-+#include <linux/io.h>
-+#include <linux/debugfs.h>
-+#include <linux/seq_file.h>
-+#include "pm.h"
++	/*
++	 * Turn on all clocks that have at least one user already, and
++	 * turn off everything else. We only do this for module
++	 * clocks, and even though it isn't particularly pretty to
++	 * check the address of the mode function, it should do the
++	 * trick...
++	 */
++	for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
++		struct clk *clk = at32_clock_list[i];
 +
++		if (clk->users == 0)
++			continue;
 +
-+#define	NEST_DELTA	2
-+#define	NEST_MAX	6
++		if (clk->mode == &cpu_clk_mode)
++			cpu_mask |= 1 << clk->index;
++		else if (clk->mode == &hsb_clk_mode)
++			hsb_mask |= 1 << clk->index;
++		else if (clk->mode == &pba_clk_mode)
++			pba_mask |= 1 << clk->index;
++		else if (clk->mode == &pbb_clk_mode)
++			pbb_mask |= 1 << clk->index;
++	}
 +
-+struct clkinf {
-+	struct seq_file	*s;
-+	unsigned	nest;
-+};
++	pm_writel(CPU_MASK, cpu_mask);
++	pm_writel(HSB_MASK, hsb_mask);
++	pm_writel(PBA_MASK, pba_mask);
++	pm_writel(PBB_MASK, pbb_mask);
++}
+diff --git a/arch/avr32/mach-at32ap/extint.c b/arch/avr32/mach-at32ap/extint.c
+index f5bfd4c..c36a6d5 100644
+--- a/arch/avr32/mach-at32ap/extint.c
++++ b/arch/avr32/mach-at32ap/extint.c
+@@ -26,16 +26,10 @@
+ #define EIC_MODE				0x0014
+ #define EIC_EDGE				0x0018
+ #define EIC_LEVEL				0x001c
+-#define EIC_TEST				0x0020
+ #define EIC_NMIC				0x0024
+ 
+-/* Bitfields in TEST */
+-#define EIC_TESTEN_OFFSET			31
+-#define EIC_TESTEN_SIZE				1
+-
+ /* Bitfields in NMIC */
+-#define EIC_EN_OFFSET				0
+-#define EIC_EN_SIZE				1
++#define EIC_NMIC_ENABLE				(1 << 0)
+ 
+ /* Bit manipulation macros */
+ #define EIC_BIT(name)					\
+@@ -63,6 +57,9 @@ struct eic {
+ 	unsigned int first_irq;
+ };
+ 
++static struct eic *nmi_eic;
++static bool nmi_enabled;
 +
-+static void
-+dump_clock(struct clk *parent, struct clkinf *r)
+ static void eic_ack_irq(unsigned int irq)
+ {
+ 	struct eic *eic = get_irq_chip_data(irq);
+@@ -133,8 +130,11 @@ static int eic_set_irq_type(unsigned int irq, unsigned int flow_type)
+ 		eic_writel(eic, EDGE, edge);
+ 		eic_writel(eic, LEVEL, level);
+ 
+-		if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
++		if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) {
+ 			flow_type |= IRQ_LEVEL;
++			__set_irq_handler_unlocked(irq, handle_level_irq);
++		} else
++			__set_irq_handler_unlocked(irq, handle_edge_irq);
+ 		desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+ 		desc->status |= flow_type;
+ 	}
+@@ -154,9 +154,8 @@ static struct irq_chip eic_chip = {
+ static void demux_eic_irq(unsigned int irq, struct irq_desc *desc)
+ {
+ 	struct eic *eic = desc->handler_data;
+-	struct irq_desc *ext_desc;
+ 	unsigned long status, pending;
+-	unsigned int i, ext_irq;
++	unsigned int i;
+ 
+ 	status = eic_readl(eic, ISR);
+ 	pending = status & eic_readl(eic, IMR);
+@@ -165,15 +164,28 @@ static void demux_eic_irq(unsigned int irq, struct irq_desc *desc)
+ 		i = fls(pending) - 1;
+ 		pending &= ~(1 << i);
+ 
+-		ext_irq = i + eic->first_irq;
+-		ext_desc = irq_desc + ext_irq;
+-		if (ext_desc->status & IRQ_LEVEL)
+-			handle_level_irq(ext_irq, ext_desc);
+-		else
+-			handle_edge_irq(ext_irq, ext_desc);
++		generic_handle_irq(i + eic->first_irq);
+ 	}
+ }
+ 
++int nmi_enable(void)
 +{
-+	unsigned	nest = r->nest;
-+	char		buf[16 + NEST_MAX];
-+	struct clk	*clk;
-+	unsigned	i;
-+
-+	/* skip clocks coupled to devices that aren't registered */
-+	if (parent->dev && !parent->dev->bus_id[0] && !parent->users)
-+		return;
-+
-+	/* <nest spaces> name <pad to end> */
-+	memset(buf, ' ', sizeof(buf) - 1);
-+	buf[sizeof(buf) - 1] = 0;
-+	i = strlen(parent->name);
-+	memcpy(buf + nest, parent->name,
-+			min(i, (unsigned)(sizeof(buf) - 1 - nest)));
-+
-+	seq_printf(r->s, "%s%c users=%2d %-3s %9ld Hz",
-+		buf, parent->set_parent ? '*' : ' ',
-+		parent->users,
-+		parent->users ? "on" : "off",	/* NOTE: not-paranoid!! */
-+		clk_get_rate(parent));
-+	if (parent->dev)
-+		seq_printf(r->s, ", for %s", parent->dev->bus_id);
-+	seq_printf(r->s, "\n");
-+
-+	/* cost of this scan is small, but not linear... */
-+	r->nest = nest + NEST_DELTA;
-+	for (i = 3; i < at32_nr_clocks; i++) {
-+		clk = at32_clock_list[i];
-+		if (clk->parent == parent)
-+			dump_clock(clk, r);
-+	}
-+	r->nest = nest;
-+}
-+
-+static int clk_show(struct seq_file *s, void *unused)
-+{
-+	struct clkinf	r;
-+	int		i;
-+
-+	/* show all the power manager registers */
-+	seq_printf(s, "MCCTRL  = %8x\n", pm_readl(MCCTRL));
-+	seq_printf(s, "CKSEL   = %8x\n", pm_readl(CKSEL));
-+	seq_printf(s, "CPUMASK = %8x\n", pm_readl(CPU_MASK));
-+	seq_printf(s, "HSBMASK = %8x\n", pm_readl(HSB_MASK));
-+	seq_printf(s, "PBAMASK = %8x\n", pm_readl(PBA_MASK));
-+	seq_printf(s, "PBBMASK = %8x\n", pm_readl(PBB_MASK));
-+	seq_printf(s, "PLL0    = %8x\n", pm_readl(PLL0));
-+	seq_printf(s, "PLL1    = %8x\n", pm_readl(PLL1));
-+	seq_printf(s, "IMR     = %8x\n", pm_readl(IMR));
-+	for (i = 0; i < 8; i++) {
-+		if (i == 5)
-+			continue;
-+		seq_printf(s, "GCCTRL%d = %8x\n", i, pm_readl(GCCTRL(i)));
-+	}
++	nmi_enabled = true;
 +
-+	seq_printf(s, "\n");
-+
-+	/* show clock tree as derived from the three oscillators
-+	 * we "know" are at the head of the list
-+	 */
-+	r.s = s;
-+	r.nest = 0;
-+	dump_clock(at32_clock_list[0], &r);
-+	dump_clock(at32_clock_list[1], &r);
-+	dump_clock(at32_clock_list[2], &r);
++	if (nmi_eic)
++		eic_writel(nmi_eic, NMIC, EIC_NMIC_ENABLE);
 +
 +	return 0;
 +}
 +
-+static int clk_open(struct inode *inode, struct file *file)
++void nmi_disable(void)
 +{
-+	return single_open(file, clk_show, NULL);
-+}
++	if (nmi_eic)
++		eic_writel(nmi_eic, NMIC, 0);
 +
-+static const struct file_operations clk_operations = {
-+	.open		= clk_open,
-+	.read		= seq_read,
-+	.llseek		= seq_lseek,
-+	.release	= single_release,
-+};
-+
-+static int __init clk_debugfs_init(void)
-+{
-+	(void) debugfs_create_file("at32ap_clk", S_IFREG | S_IRUGO,
-+			NULL, NULL, &clk_operations);
-+
-+	return 0;
++	nmi_enabled = false;
 +}
-+postcore_initcall(clk_debugfs_init);
 +
-+#endif
+ static int __init eic_probe(struct platform_device *pdev)
+ {
+ 	struct eic *eic;
+@@ -214,14 +226,13 @@ static int __init eic_probe(struct platform_device *pdev)
+ 	pattern = eic_readl(eic, MODE);
+ 	nr_irqs = fls(pattern);
+ 
+-	/* Trigger on falling edge unless overridden by driver */
+-	eic_writel(eic, MODE, 0UL);
++	/* Trigger on low level unless overridden by driver */
+ 	eic_writel(eic, EDGE, 0UL);
++	eic_writel(eic, LEVEL, 0UL);
+ 
+ 	eic->chip = &eic_chip;
+ 
+ 	for (i = 0; i < nr_irqs; i++) {
+-		/* NOTE the handler we set here is ignored by the demux */
+ 		set_irq_chip_and_handler(eic->first_irq + i, &eic_chip,
+ 					 handle_level_irq);
+ 		set_irq_chip_data(eic->first_irq + i, eic);
+@@ -230,6 +241,16 @@ static int __init eic_probe(struct platform_device *pdev)
+ 	set_irq_chained_handler(int_irq, demux_eic_irq);
+ 	set_irq_data(int_irq, eic);
+ 
++	if (pdev->id == 0) {
++		nmi_eic = eic;
++		if (nmi_enabled)
++			/*
++			 * Someone tried to enable NMI before we were
++			 * ready. Do it now.
++			 */
++			nmi_enable();
++	}
++
+ 	dev_info(&pdev->dev,
+ 		 "External Interrupt Controller at 0x%p, IRQ %u\n",
+ 		 eic->regs, int_irq);
 diff --git a/arch/avr32/mach-at32ap/gpio-dev.c b/arch/avr32/mach-at32ap/gpio-dev.c
 new file mode 100644
 index 0000000..8cf6d11
@@ -3626,172 +10816,11 @@ index 0000000..8cf6d11
 +	return err;
 +}
 +late_initcall(gpio_dev_init);
-diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c
-index 5e22a75..704607f 100644
---- a/arch/avr32/mach-at32ap/hsmc.c
-+++ b/arch/avr32/mach-at32ap/hsmc.c
-@@ -29,16 +29,25 @@ struct hsmc {
- 
- static struct hsmc *hsmc;
- 
--int smc_set_configuration(int cs, const struct smc_config *config)
-+void smc_set_timing(struct smc_config *config,
-+		    const struct smc_timing *timing)
- {
-+	int recover;
-+	int cycle;
-+
- 	unsigned long mul;
--	unsigned long offset;
--	u32 setup, pulse, cycle, mode;
- 
--	if (!hsmc)
--		return -ENODEV;
--	if (cs >= NR_CHIP_SELECTS)
--		return -EINVAL;
-+	/* Reset all SMC timings */
-+	config->ncs_read_setup	= 0;
-+	config->nrd_setup	= 0;
-+	config->ncs_write_setup	= 0;
-+	config->nwe_setup	= 0;
-+	config->ncs_read_pulse	= 0;
-+	config->nrd_pulse	= 0;
-+	config->ncs_write_pulse	= 0;
-+	config->nwe_pulse	= 0;
-+	config->read_cycle	= 0;
-+	config->write_cycle	= 0;
- 
- 	/*
- 	 * cycles = x / T = x * f
-@@ -50,16 +59,102 @@ int smc_set_configuration(int cs, const struct smc_config *config)
- 
- #define ns2cyc(x) ((((x) * mul) + 65535) >> 16)
- 
--	setup = (HSMC_BF(NWE_SETUP, ns2cyc(config->nwe_setup))
--		 | HSMC_BF(NCS_WR_SETUP, ns2cyc(config->ncs_write_setup))
--		 | HSMC_BF(NRD_SETUP, ns2cyc(config->nrd_setup))
--		 | HSMC_BF(NCS_RD_SETUP, ns2cyc(config->ncs_read_setup)));
--	pulse = (HSMC_BF(NWE_PULSE, ns2cyc(config->nwe_pulse))
--		 | HSMC_BF(NCS_WR_PULSE, ns2cyc(config->ncs_write_pulse))
--		 | HSMC_BF(NRD_PULSE, ns2cyc(config->nrd_pulse))
--		 | HSMC_BF(NCS_RD_PULSE, ns2cyc(config->ncs_read_pulse)));
--	cycle = (HSMC_BF(NWE_CYCLE, ns2cyc(config->write_cycle))
--		 | HSMC_BF(NRD_CYCLE, ns2cyc(config->read_cycle)));
-+	if (timing->ncs_read_setup > 0)
-+		config->ncs_read_setup = ns2cyc(timing->ncs_read_setup);
-+
-+	if (timing->nrd_setup > 0)
-+		config->nrd_setup = ns2cyc(timing->nrd_setup);
-+
-+	if (timing->ncs_write_setup > 0)
-+		config->ncs_write_setup = ns2cyc(timing->ncs_write_setup);
-+
-+	if (timing->nwe_setup > 0)
-+		config->nwe_setup = ns2cyc(timing->nwe_setup);
-+
-+	if (timing->ncs_read_pulse > 0)
-+		config->ncs_read_pulse = ns2cyc(timing->ncs_read_pulse);
-+
-+	if (timing->nrd_pulse > 0)
-+		config->nrd_pulse = ns2cyc(timing->nrd_pulse);
-+
-+	if (timing->ncs_write_pulse > 0)
-+		config->ncs_write_pulse = ns2cyc(timing->ncs_write_pulse);
-+
-+	if (timing->nwe_pulse > 0)
-+		config->nwe_pulse = ns2cyc(timing->nwe_pulse);
-+
-+	if (timing->read_cycle > 0)
-+		config->read_cycle = ns2cyc(timing->read_cycle);
-+
-+	if (timing->write_cycle > 0)
-+		config->write_cycle = ns2cyc(timing->write_cycle);
-+
-+	/* Extend read cycle in needed */
-+	if (timing->ncs_read_recover > 0)
-+		recover = ns2cyc(timing->ncs_read_recover);
-+	else
-+		recover = 1;
-+
-+	cycle = config->ncs_read_setup + config->ncs_read_pulse + recover;
-+
-+	if (config->read_cycle < cycle)
-+		config->read_cycle = cycle;
-+
-+	/* Extend read cycle in needed */
-+	if (timing->nrd_recover > 0)
-+		recover = ns2cyc(timing->nrd_recover);
-+	else
-+		recover = 1;
-+
-+	cycle = config->nrd_setup + config->nrd_pulse + recover;
-+
-+	if (config->read_cycle < cycle)
-+		config->read_cycle = cycle;
-+
-+	/* Extend write cycle in needed */
-+	if (timing->ncs_write_recover > 0)
-+		recover = ns2cyc(timing->ncs_write_recover);
-+	else
-+		recover = 1;
-+
-+	cycle = config->ncs_write_setup + config->ncs_write_pulse + recover;
-+
-+	if (config->write_cycle < cycle)
-+		config->write_cycle = cycle;
-+
-+	/* Extend write cycle in needed */
-+	if (timing->nwe_recover > 0)
-+		recover = ns2cyc(timing->nwe_recover);
-+	else
-+		recover = 1;
-+
-+	cycle = config->nwe_setup + config->nwe_pulse + recover;
-+
-+	if (config->write_cycle < cycle)
-+		config->write_cycle = cycle;
-+}
-+EXPORT_SYMBOL(smc_set_timing);
-+
-+int smc_set_configuration(int cs, const struct smc_config *config)
-+{
-+	unsigned long offset;
-+	u32 setup, pulse, cycle, mode;
-+
-+	if (!hsmc)
-+		return -ENODEV;
-+	if (cs >= NR_CHIP_SELECTS)
-+		return -EINVAL;
-+
-+	setup = (HSMC_BF(NWE_SETUP, config->nwe_setup)
-+		 | HSMC_BF(NCS_WR_SETUP, config->ncs_write_setup)
-+		 | HSMC_BF(NRD_SETUP, config->nrd_setup)
-+		 | HSMC_BF(NCS_RD_SETUP, config->ncs_read_setup));
-+	pulse = (HSMC_BF(NWE_PULSE, config->nwe_pulse)
-+		 | HSMC_BF(NCS_WR_PULSE, config->ncs_write_pulse)
-+		 | HSMC_BF(NRD_PULSE, config->nrd_pulse)
-+		 | HSMC_BF(NCS_RD_PULSE, config->ncs_read_pulse));
-+	cycle = (HSMC_BF(NWE_CYCLE, config->write_cycle)
-+		 | HSMC_BF(NRD_CYCLE, config->read_cycle));
- 
- 	switch (config->bus_width) {
- 	case 1:
 diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
-index 1eb99b8..c978c36 100644
+index d61a02d..c978c36 100644
 --- a/arch/avr32/mach-at32ap/pio.c
 +++ b/arch/avr32/mach-at32ap/pio.c
-@@ -110,6 +110,10 @@ void __init at32_select_gpio(unsigned int pin, unsigned long flags)
- 			pio_writel(pio, SODR, mask);
- 		else
- 			pio_writel(pio, CODR, mask);
-+		if (flags & AT32_GPIOF_MULTIDRV)
-+			pio_writel(pio, MDER, mask);
-+		else
-+			pio_writel(pio, MDDR, mask);
- 		pio_writel(pio, PUDR, mask);
- 		pio_writel(pio, OER, mask);
- 	} else {
-@@ -158,6 +162,82 @@ fail:
+@@ -162,6 +162,82 @@ fail:
  	dump_stack();
  }
  
@@ -3874,27 +10903,8 @@ index 1eb99b8..c978c36 100644
  /*--------------------------------------------------------------------------*/
  
  /* GPIO API */
-diff --git a/arch/avr32/mach-at32ap/pm.h b/arch/avr32/mach-at32ap/pm.h
-index a1f8ace..47efd0d 100644
---- a/arch/avr32/mach-at32ap/pm.h
-+++ b/arch/avr32/mach-at32ap/pm.h
-@@ -4,6 +4,14 @@
- #ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__
- #define __ARCH_AVR32_MACH_AT32AP_PM_H__
- 
-+/*
-+ * We can reduce the code size a bit by using a constant here. Since
-+ * this file is only used on AVR32 AP CPUs with segmentation enabled,
-+ * it's safe to not use ioremap. Generic drivers should of course
-+ * never do this.
-+ */
-+#define AT32_PM_BASE	0xfff00000
-+
- /* PM register offsets */
- #define PM_MCCTRL				0x0000
- #define PM_CKSEL				0x0004
 diff --git a/arch/avr32/mm/dma-coherent.c b/arch/avr32/mm/dma-coherent.c
-index 099212d..26f29c6 100644
+index 177fea8..6d8c794 100644
 --- a/arch/avr32/mm/dma-coherent.c
 +++ b/arch/avr32/mm/dma-coherent.c
 @@ -41,6 +41,13 @@ static struct page *__dma_alloc(struct device *dev, size_t size,
@@ -3911,38 +10921,281 @@ index 099212d..26f29c6 100644
  	size = PAGE_ALIGN(size);
  	order = get_order(size);
  
-diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c
-index 82cf708..480760b 100644
---- a/arch/avr32/mm/init.c
-+++ b/arch/avr32/mm/init.c
-@@ -224,19 +224,9 @@ void free_initmem(void)
- 
- #ifdef CONFIG_BLK_DEV_INITRD
- 
--static int keep_initrd;
--
- void free_initrd_mem(unsigned long start, unsigned long end)
- {
--	if (!keep_initrd)
--		free_area(start, end, "initrd");
--}
--
--static int __init keepinitrd_setup(char *__unused)
--{
--	keep_initrd = 1;
--	return 1;
-+	free_area(start, end, "initrd");
+diff --git a/arch/avr32/mm/tlb.c b/arch/avr32/mm/tlb.c
+index 5667201..b835257 100644
+--- a/arch/avr32/mm/tlb.c
++++ b/arch/avr32/mm/tlb.c
+@@ -348,7 +348,7 @@ static int tlb_show(struct seq_file *tlb, void *v)
+ 	return 0;
  }
  
--__setup("keepinitrd", keepinitrd_setup);
- #endif
+-static struct seq_operations tlb_ops = {
++static const struct seq_operations tlb_ops = {
+ 	.start		= tlb_start,
+ 	.next		= tlb_next,
+ 	.stop		= tlb_stop,
+diff --git a/arch/avr32/oprofile/Makefile b/arch/avr32/oprofile/Makefile
+new file mode 100644
+index 0000000..1fe81c3
+--- /dev/null
++++ b/arch/avr32/oprofile/Makefile
+@@ -0,0 +1,8 @@
++obj-$(CONFIG_OPROFILE) += oprofile.o
++
++oprofile-y		:= $(addprefix ../../../drivers/oprofile/,	\
++				oprof.o cpu_buffer.o buffer_sync.o	\
++				event_buffer.o oprofile_files.o		\
++				oprofilefs.o oprofile_stats.o		\
++				timer_int.o)
++oprofile-y		+= op_model_avr32.o
+diff --git a/arch/avr32/oprofile/op_model_avr32.c b/arch/avr32/oprofile/op_model_avr32.c
+new file mode 100644
+index 0000000..e2f876b
+--- /dev/null
++++ b/arch/avr32/oprofile/op_model_avr32.c
+@@ -0,0 +1,235 @@
++/*
++ * AVR32 Performance Counter Driver
++ *
++ * Copyright (C) 2005-2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * Author: Ronny Pedersen
++ */
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <linux/oprofile.h>
++#include <linux/sched.h>
++#include <linux/types.h>
++
++#include <asm/intc.h>
++#include <asm/sysreg.h>
++#include <asm/system.h>
++
++#define AVR32_PERFCTR_IRQ_GROUP	0
++#define AVR32_PERFCTR_IRQ_LINE	1
++
++enum { PCCNT, PCNT0, PCNT1, NR_counter };
++
++struct avr32_perf_counter {
++	unsigned long	enabled;
++	unsigned long	event;
++	unsigned long	count;
++	unsigned long	unit_mask;
++	unsigned long	kernel;
++	unsigned long	user;
++
++	u32		ie_mask;
++	u32		flag_mask;
++};
++
++static struct avr32_perf_counter counter[NR_counter] = {
++	{
++		.ie_mask	= SYSREG_BIT(IEC),
++		.flag_mask	= SYSREG_BIT(FC),
++	}, {
++		.ie_mask	= SYSREG_BIT(IE0),
++		.flag_mask	= SYSREG_BIT(F0),
++	}, {
++		.ie_mask	= SYSREG_BIT(IE1),
++		.flag_mask	= SYSREG_BIT(F1),
++	},
++};
++
++static void avr32_perf_counter_reset(void)
++{
++	/* Reset all counter and disable/clear all interrupts */
++	sysreg_write(PCCR, (SYSREG_BIT(PCCR_R)
++				| SYSREG_BIT(PCCR_C)
++				| SYSREG_BIT(FC)
++				| SYSREG_BIT(F0)
++				| SYSREG_BIT(F1)));
++}
++
++static irqreturn_t avr32_perf_counter_interrupt(int irq, void *dev_id)
++{
++	struct avr32_perf_counter *ctr = dev_id;
++	struct pt_regs *regs;
++	u32 pccr;
++
++	if (likely(!(intc_get_pending(AVR32_PERFCTR_IRQ_GROUP)
++					& (1 << AVR32_PERFCTR_IRQ_LINE))))
++		return IRQ_NONE;
++
++	regs = get_irq_regs();
++	pccr = sysreg_read(PCCR);
++
++	/* Clear the interrupt flags we're about to handle */
++	sysreg_write(PCCR, pccr);
++
++	/* PCCNT */
++	if (ctr->enabled && (pccr & ctr->flag_mask)) {
++		sysreg_write(PCCNT, -ctr->count);
++		oprofile_add_sample(regs, PCCNT);
++	}
++	ctr++;
++	/* PCNT0 */
++	if (ctr->enabled && (pccr & ctr->flag_mask)) {
++		sysreg_write(PCNT0, -ctr->count);
++		oprofile_add_sample(regs, PCNT0);
++	}
++	ctr++;
++	/* PCNT1 */
++	if (ctr->enabled && (pccr & ctr->flag_mask)) {
++		sysreg_write(PCNT1, -ctr->count);
++		oprofile_add_sample(regs, PCNT1);
++	}
++
++	return IRQ_HANDLED;
++}
++
++static int avr32_perf_counter_create_files(struct super_block *sb,
++		struct dentry *root)
++{
++	struct dentry *dir;
++	unsigned int i;
++	char filename[4];
++
++	for (i = 0; i < NR_counter; i++) {
++		snprintf(filename, sizeof(filename), "%u", i);
++		dir = oprofilefs_mkdir(sb, root, filename);
++
++		oprofilefs_create_ulong(sb, dir, "enabled",
++				&counter[i].enabled);
++		oprofilefs_create_ulong(sb, dir, "event",
++				&counter[i].event);
++		oprofilefs_create_ulong(sb, dir, "count",
++				&counter[i].count);
++
++		/* Dummy entries */
++		oprofilefs_create_ulong(sb, dir, "kernel",
++				&counter[i].kernel);
++		oprofilefs_create_ulong(sb, dir, "user",
++				&counter[i].user);
++		oprofilefs_create_ulong(sb, dir, "unit_mask",
++				&counter[i].unit_mask);
++	}
++
++	return 0;
++}
++
++static int avr32_perf_counter_setup(void)
++{
++	struct avr32_perf_counter *ctr;
++	u32 pccr;
++	int ret;
++	int i;
++
++	pr_debug("avr32_perf_counter_setup\n");
++
++	if (sysreg_read(PCCR) & SYSREG_BIT(PCCR_E)) {
++		printk(KERN_ERR
++			"oprofile: setup: perf counter already enabled\n");
++		return -EBUSY;
++	}
++
++	ret = request_irq(AVR32_PERFCTR_IRQ_GROUP,
++			avr32_perf_counter_interrupt, IRQF_SHARED,
++			"oprofile", counter);
++	if (ret)
++		return ret;
++
++	avr32_perf_counter_reset();
++
++	pccr = 0;
++	for (i = PCCNT; i < NR_counter; i++) {
++		ctr = &counter[i];
++		if (!ctr->enabled)
++			continue;
++
++		pr_debug("enabling counter %d...\n", i);
++
++		pccr |= ctr->ie_mask;
++
++		switch (i) {
++		case PCCNT:
++			/* PCCNT always counts cycles, so no events */
++			sysreg_write(PCCNT, -ctr->count);
++			break;
++		case PCNT0:
++			pccr |= SYSREG_BF(CONF0, ctr->event);
++			sysreg_write(PCNT0, -ctr->count);
++			break;
++		case PCNT1:
++			pccr |= SYSREG_BF(CONF1, ctr->event);
++			sysreg_write(PCNT1, -ctr->count);
++			break;
++		}
++	}
++
++	pr_debug("oprofile: writing 0x%x to PCCR...\n", pccr);
++
++	sysreg_write(PCCR, pccr);
++
++	return 0;
++}
++
++static void avr32_perf_counter_shutdown(void)
++{
++	pr_debug("avr32_perf_counter_shutdown\n");
++
++	avr32_perf_counter_reset();
++	free_irq(AVR32_PERFCTR_IRQ_GROUP, counter);
++}
++
++static int avr32_perf_counter_start(void)
++{
++	pr_debug("avr32_perf_counter_start\n");
++
++	sysreg_write(PCCR, sysreg_read(PCCR) | SYSREG_BIT(PCCR_E));
++
++	return 0;
++}
++
++static void avr32_perf_counter_stop(void)
++{
++	pr_debug("avr32_perf_counter_stop\n");
++
++	sysreg_write(PCCR, sysreg_read(PCCR) & ~SYSREG_BIT(PCCR_E));
++}
++
++static struct oprofile_operations avr32_perf_counter_ops __initdata = {
++	.create_files	= avr32_perf_counter_create_files,
++	.setup		= avr32_perf_counter_setup,
++	.shutdown	= avr32_perf_counter_shutdown,
++	.start		= avr32_perf_counter_start,
++	.stop		= avr32_perf_counter_stop,
++	.cpu_type	= "avr32",
++};
++
++int __init oprofile_arch_init(struct oprofile_operations *ops)
++{
++	if (!(current_cpu_data.features & AVR32_FEATURE_PCTR))
++		return -ENODEV;
++
++	memcpy(ops, &avr32_perf_counter_ops,
++			sizeof(struct oprofile_operations));
++
++	printk(KERN_INFO "oprofile: using AVR32 performance monitoring.\n");
++
++	return 0;
++}
++
++void oprofile_arch_exit(void)
++{
++
++}
 diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
-index 9f3a4cd..6f5bcd6 100644
+index c466c6c..0bb2052 100644
 --- a/drivers/i2c/busses/Kconfig
 +++ b/drivers/i2c/busses/Kconfig
-@@ -80,6 +80,14 @@ config I2C_AT91
- 	  This supports the use of the I2C interface on Atmel AT91
- 	  processors.
+@@ -88,6 +88,14 @@ config I2C_AT91
+ 	  to support combined I2C messages.  Use the i2c-gpio driver
+ 	  unless your system can cope with those limitations.
  
 +config I2C_ATMELTWI
 +	tristate "Atmel Two-Wire Interface (TWI)"
@@ -3956,10 +11209,10 @@ index 9f3a4cd..6f5bcd6 100644
  	tristate "Au1550/Au1200 SMBus interface"
  	depends on SOC_AU1550 || SOC_AU1200
 diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
-index 5b752e4..e4644a8 100644
+index 81d43c2..af3f350 100644
 --- a/drivers/i2c/busses/Makefile
 +++ b/drivers/i2c/busses/Makefile
-@@ -52,6 +52,7 @@ obj-$(CONFIG_I2C_VIAPRO)	+= i2c-viapro.o
+@@ -53,6 +53,7 @@ obj-$(CONFIG_I2C_VIAPRO)	+= i2c-viapro.o
  obj-$(CONFIG_I2C_VOODOO3)	+= i2c-voodoo3.o
  obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
  obj-$(CONFIG_SCx200_I2C)	+= scx200_i2c.o
@@ -3969,7 +11222,7 @@ index 5b752e4..e4644a8 100644
  EXTRA_CFLAGS += -DDEBUG
 diff --git a/drivers/i2c/busses/i2c-atmeltwi.c b/drivers/i2c/busses/i2c-atmeltwi.c
 new file mode 100644
-index 0000000..3f78b31
+index 0000000..70c719a
 --- /dev/null
 +++ b/drivers/i2c/busses/i2c-atmeltwi.c
 @@ -0,0 +1,436 @@
@@ -4295,7 +11548,7 @@ index 0000000..3f78b31
 +	if (!regs)
 +		return -ENXIO;
 +
-+	pclk = clk_get(&pdev->dev, "pclk");
++	pclk = clk_get(&pdev->dev, "twi_pclk");
 +	if (IS_ERR(pclk))
 +		return PTR_ERR(pclk);
 +	clk_enable(pclk);
@@ -4532,219 +11785,649 @@ index 0000000..1aca065
 +	__raw_writel((value), (port)->regs + TWI_##reg)
 +
 +#endif /* __ATMELTWI_H__ */
+diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
+index ec568fa..4e1db3b 100644
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -18,6 +18,13 @@ config LEDS_CLASS
+ 
+ comment "LED drivers"
+ 
++config LEDS_ATMEL_PWM
++	tristate "LED Support using Atmel PWM outputs"
++	depends on LEDS_CLASS && ATMEL_PWM
++	help
++	  This option enables support for LEDs driven using outputs
++	  of the dedicated PWM controller found on newer Atmel SOCs.
++
+ config LEDS_CORGI
+ 	tristate "LED Support for the Sharp SL-C7x0 series"
+ 	depends on LEDS_CLASS && PXA_SHARP_C7xx
+diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
+index a60de1b..04bc850 100644
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -5,6 +5,7 @@ obj-$(CONFIG_LEDS_CLASS)		+= led-class.o
+ obj-$(CONFIG_LEDS_TRIGGERS)		+= led-triggers.o
+ 
+ # LED Platform Drivers
++obj-$(CONFIG_LEDS_ATMEL_PWM)		+= leds-atmel-pwm.o
+ obj-$(CONFIG_LEDS_CORGI)		+= leds-corgi.o
+ obj-$(CONFIG_LEDS_LOCOMO)		+= leds-locomo.o
+ obj-$(CONFIG_LEDS_SPITZ)		+= leds-spitz.o
+diff --git a/drivers/leds/leds-atmel-pwm.c b/drivers/leds/leds-atmel-pwm.c
+new file mode 100644
+index 0000000..187031c
+--- /dev/null
++++ b/drivers/leds/leds-atmel-pwm.c
+@@ -0,0 +1,155 @@
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <linux/io.h>
++#include <linux/atmel_pwm.h>
++
++
++struct pwmled {
++	struct led_classdev	cdev;
++	struct pwm_channel	pwmc;
++	struct gpio_led		*desc;
++	u32			mult;
++	u8			active_low;
++};
++
++
++/*
++ * For simplicity, we use "brightness" as if it were a linear function
++ * of PWM duty cycle.  However, a logarithmic function of duty cycle is
++ * probably a better match for perceived brightness: two is half as bright
++ * as four, four is half as bright as eight, etc
++ */
++static void pwmled_brightness(struct led_classdev *cdev, enum led_brightness b)
++{
++	struct pwmled		 *led;
++
++	/* update the duty cycle for the *next* period */
++	led = container_of(cdev, struct pwmled, cdev);
++	pwm_channel_writel(&led->pwmc, PWM_CUPD, led->mult * (unsigned) b);
++}
++
++/*
++ * NOTE:  we reuse the platform_data structure of GPIO leds,
++ * but repurpose its "gpio" number as a PWM channel number.
++ */
++static int __init pwmled_probe(struct platform_device *pdev)
++{
++	const struct gpio_led_platform_data	*pdata;
++	struct pwmled				*leds;
++	unsigned				i;
++	int					status;
++
++	pdata = pdev->dev.platform_data;
++	if (!pdata || pdata->num_leds < 1)
++		return -ENODEV;
++
++	leds = kcalloc(pdata->num_leds, sizeof(*leds), GFP_KERNEL);
++	if (!leds)
++		return -ENOMEM;
++
++	for (i = 0; i < pdata->num_leds; i++) {
++		struct pwmled		*led = leds + i;
++		const struct gpio_led	*dat = pdata->leds + i;
++		u32			tmp;
++
++		led->cdev.name = dat->name;
++		led->cdev.brightness = LED_OFF;
++		led->cdev.brightness_set = pwmled_brightness;
++		led->cdev.default_trigger = dat->default_trigger;
++
++		led->active_low = dat->active_low;
++
++		status = pwm_channel_alloc(dat->gpio, &led->pwmc);
++		if (status < 0)
++			goto err;
++
++		/*
++		 * Prescale clock by 2^x, so PWM counts in low MHz.
++		 * Start each cycle with the LED active, so increasing
++		 * the duty cycle gives us more time on (== brighter).
++		 */
++		tmp = 5;
++		if (!led->active_low)
++			tmp |= PWM_CPR_CPOL;
++		pwm_channel_writel(&led->pwmc, PWM_CMR, tmp);
++
++		/*
++		 * Pick a period so PWM cycles at 100+ Hz; and a multiplier
++		 * for scaling duty cycle:  brightness * mult.
++		 */
++		tmp = (led->pwmc.mck / (1 << 5)) / 100;
++		tmp /= 255;
++		led->mult = tmp;
++		pwm_channel_writel(&led->pwmc, PWM_CDTY,
++				led->cdev.brightness * 255);
++		pwm_channel_writel(&led->pwmc, PWM_CPRD,
++				LED_FULL * tmp);
++
++		pwm_channel_enable(&led->pwmc);
++
++		/* Hand it over to the LED framework */
++		status = led_classdev_register(&pdev->dev, &led->cdev);
++		if (status < 0) {
++			pwm_channel_free(&led->pwmc);
++			goto err;
++		}
++	}
++
++	platform_set_drvdata(pdev, leds);
++	return 0;
++
++err:
++	while (i-- > 0) {
++		led_classdev_unregister(&leds[i].cdev);
++		pwm_channel_free(&leds[i].pwmc);
++	}
++	kfree(leds);
++
++	return status;
++}
++
++static int __exit pwmled_remove(struct platform_device *pdev)
++{
++	const struct gpio_led_platform_data	*pdata;
++	struct pwmled				*leds;
++	unsigned				i;
++
++	pdata = pdev->dev.platform_data;
++	leds = platform_get_drvdata(pdev);
++
++	for (i = 0; i < pdata->num_leds; i++) {
++		struct pwmled		*led = leds + i;
++
++		led_classdev_unregister(&led->cdev);
++		pwm_channel_free(&led->pwmc);
++	}
++
++	kfree(leds);
++	platform_set_drvdata(pdev, NULL);
++	return 0;
++}
++
++static struct platform_driver pwmled_driver = {
++	.driver = {
++		.name =		"leds-atmel-pwm",
++		.owner =	THIS_MODULE,
++	},
++	/* REVISIT add suspend() and resume() methods */
++	.remove =	__exit_p(pwmled_remove),
++};
++
++static int __init modinit(void)
++{
++	return platform_driver_probe(&pwmled_driver, pwmled_probe);
++}
++module_init(modinit);
++
++static void __exit modexit(void)
++{
++	platform_driver_unregister(&pwmled_driver);
++}
++module_exit(modexit);
++
++MODULE_DESCRIPTION("Driver for LEDs with PWM-controlled brightness");
++MODULE_LICENSE("GPL");
 diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
-index 73e248f..9e848cc 100644
+index b5e67c0..23a9231 100644
 --- a/drivers/misc/Kconfig
 +++ b/drivers/misc/Kconfig
-@@ -202,5 +202,14 @@ config THINKPAD_ACPI_BAY
+@@ -13,6 +13,15 @@ menuconfig MISC_DEVICES
  
- 	  If you are not sure, say Y here.
+ if MISC_DEVICES
  
-+config ATMEL_SSC
-+	tristate "Device driver for Atmel SSC peripheral"
++config ATMEL_PWM
++	tristate "Atmel AT32/AT91 PWM support"
 +	depends on AVR32 || ARCH_AT91
-+	---help---
-+	  This option enables device driver support for Atmel Syncronized
-+	  Serial Communication peripheral (SSC).
-+
-+	  The SSC peripheral supports a wide variety of serial frame based
-+	  communications, i.e. I2S, SPI, etc.
- 
- endif # MISC_DEVICES
++	help
++	  This option enables device driver support for the PWM channels
++	  on certain Atmel prcoessors.  Pulse Width Modulation is used for
++	  purposes including software controlled power-efficent backlights
++	  on LCD displays, motor control, and waveform generation.
++
+ config IBM_ASM
+ 	tristate "Device driver for IBM RSA service processor"
+ 	depends on X86 && PCI && INPUT && EXPERIMENTAL
 diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
-index b5ce0e3..40d8ed1 100644
+index 87f2685..b4674c6 100644
 --- a/drivers/misc/Makefile
 +++ b/drivers/misc/Makefile
-@@ -15,3 +15,4 @@ obj-$(CONFIG_SGI_IOC4)		+= ioc4.o
- obj-$(CONFIG_SONY_LAPTOP)	+= sony-laptop.o
- obj-$(CONFIG_THINKPAD_ACPI)	+= thinkpad_acpi.o
- obj-$(CONFIG_EEPROM_93CX6)	+= eeprom_93cx6.o
-+obj-$(CONFIG_ATMEL_SSC)		+= atmel-ssc.o
-diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
+@@ -7,6 +7,7 @@ obj-$(CONFIG_IBM_ASM)		+= ibmasm/
+ obj-$(CONFIG_HDPU_FEATURES)	+= hdpuftrs/
+ obj-$(CONFIG_MSI_LAPTOP)     += msi-laptop.o
+ obj-$(CONFIG_ASUS_LAPTOP)     += asus-laptop.o
++obj-$(CONFIG_ATMEL_PWM)		+= atmel_pwm.o
+ obj-$(CONFIG_ATMEL_SSC)		+= atmel-ssc.o
+ obj-$(CONFIG_LKDTM)		+= lkdtm.o
+ obj-$(CONFIG_TIFM_CORE)       	+= tifm_core.o
+diff --git a/drivers/misc/atmel_pwm.c b/drivers/misc/atmel_pwm.c
 new file mode 100644
-index 0000000..058ccac
+index 0000000..f8d3b9a
 --- /dev/null
-+++ b/drivers/misc/atmel-ssc.c
-@@ -0,0 +1,174 @@
++++ b/drivers/misc/atmel_pwm.c
+@@ -0,0 +1,409 @@
++#include <linux/module.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/atmel_pwm.h>
++
++
 +/*
-+ * Atmel SSC driver
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
++ * This is a simple driver for the PWM controller found in various newer
++ * Atmel SOCs, including the AVR32 series and the AT91sam9263.
 + *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
++ * Chips with current Linux ports have only 4 PWM channels, out of max 32.
++ * AT32UC3A and AT32UC3B chips have 7 channels (but currently no Linux).
++ * Docs are inconsistent about the width of the channel counter registers;
++ * it's at least 16 bits, but several places say 20 bits.
 + */
++#define	PWM_NCHAN	4		/* max 32 */
++
++struct pwm {
++	spinlock_t		lock;
++	struct platform_device	*pdev;
++	u32			mask;
++	int			irq;
++	void __iomem		*base;
++	struct clk		*clk;
++	struct pwm_channel	*channel[PWM_NCHAN];
++	void			(*handler[PWM_NCHAN])(struct pwm_channel *);
++};
 +
-+#include <linux/platform_device.h>
-+#include <linux/list.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/list.h>
-+#include <linux/spinlock.h>
-+#include <linux/atmel-ssc.h>
 +
-+/* Serialize access to ssc_list and user count */
-+static DEFINE_SPINLOCK(user_lock);
-+static LIST_HEAD(ssc_list);
++/* global PWM controller registers */
++#define PWM_MR		0x00
++#define PWM_ENA		0x04
++#define PWM_DIS		0x08
++#define PWM_SR		0x0c
++#define PWM_IER		0x10
++#define PWM_IDR		0x14
++#define PWM_IMR		0x18
++#define PWM_ISR		0x1c
 +
-+struct ssc_device *ssc_request(unsigned int ssc_num)
++static inline void pwm_writel(const struct pwm *p, unsigned offset, u32 val)
 +{
-+	int ssc_valid = 0;
-+	struct ssc_device *ssc;
++	__raw_writel(val, p->base + offset);
++}
 +
-+	spin_lock(&user_lock);
-+	list_for_each_entry(ssc, &ssc_list, list) {
-+		if (ssc->pdev->id == ssc_num) {
-+			ssc_valid = 1;
-+			break;
-+		}
-+	}
++static inline u32 pwm_readl(const struct pwm *p, unsigned offset)
++{
++	return __raw_readl(p->base + offset);
++}
 +
-+	if (!ssc_valid) {
-+		spin_unlock(&user_lock);
-+		dev_dbg(&ssc->pdev->dev, "could not find requested device\n");
-+		return ERR_PTR(-ENODEV);
-+	}
++static inline void __iomem *pwmc_regs(const struct pwm *p, int index)
++{
++	return p->base + 0x200 + index * 0x20;
++}
++
++static struct pwm *pwm;
++
++static void pwm_dumpregs(struct pwm_channel *ch, char *tag)
++{
++	struct device	*dev = &pwm->pdev->dev;
++
++	dev_dbg(dev, "%s: mr %08x, sr %08x, imr %08x\n",
++		tag,
++		pwm_readl(pwm, PWM_MR),
++		pwm_readl(pwm, PWM_SR),
++		pwm_readl(pwm, PWM_IMR));
++	dev_dbg(dev,
++		"pwm ch%d - mr %08x, dty %u, prd %u, cnt %u\n",
++		ch->index,
++		pwm_channel_readl(ch, PWM_CMR),
++		pwm_channel_readl(ch, PWM_CDTY),
++		pwm_channel_readl(ch, PWM_CPRD),
++		pwm_channel_readl(ch, PWM_CCNT));
++}
++
++
++/**
++ * pwm_channel_alloc - allocate an unused PWM channel
++ * @index: identifies the channel
++ * @ch: structure to be initialized
++ *
++ * Drivers allocate PWM channels according to the board's wiring, and
++ * matching board-specific setup code.  Returns zero or negative errno.
++ */
++int pwm_channel_alloc(int index, struct pwm_channel *ch)
++{
++	unsigned long	flags;
++	int		status = 0;
++
++	/* insist on PWM init, with this signal pinned out */
++	if (!pwm || !(pwm->mask & 1 << index))
++		return -ENODEV;
++
++	if (index < 0 || index >= PWM_NCHAN || !ch)
++		return -EINVAL;
++	memset(ch, 0, sizeof *ch);
 +
-+	if (ssc->user) {
-+		spin_unlock(&user_lock);
-+		dev_dbg(&ssc->pdev->dev, "module busy\n");
-+		return ERR_PTR(-EBUSY);
++	spin_lock_irqsave(&pwm->lock, flags);
++	if (pwm->channel[index])
++		status = -EBUSY;
++	else {
++		clk_enable(pwm->clk);
++
++		ch->regs = pwmc_regs(pwm, index);
++		ch->index = index;
++
++		/* REVISIT: ap7000 seems to go 2x as fast as we expect!! */
++		ch->mck = clk_get_rate(pwm->clk);
++
++		pwm->channel[index] = ch;
++		pwm->handler[index] = NULL;
++
++		/* channel and irq are always disabled when we return */
++		pwm_writel(pwm, PWM_DIS, 1 << index);
++		pwm_writel(pwm, PWM_IDR, 1 << index);
 +	}
-+	ssc->user++;
-+	spin_unlock(&user_lock);
++	spin_unlock_irqrestore(&pwm->lock, flags);
++	return status;
++}
++EXPORT_SYMBOL(pwm_channel_alloc);
 +
-+	clk_enable(ssc->clk);
++static int pwmcheck(struct pwm_channel *ch)
++{
++	int		index;
++
++	if (!pwm)
++		return -ENODEV;
++	if (!ch)
++		return -EINVAL;
++	index = ch->index;
++	if (index < 0 || index >= PWM_NCHAN || pwm->channel[index] != ch)
++		return -EINVAL;
 +
-+	return ssc;
++	return index;
 +}
-+EXPORT_SYMBOL(ssc_request);
 +
-+void ssc_free(struct ssc_device *ssc)
++/**
++ * pwm_channel_free - release a previously allocated channel
++ * @ch: the channel being released
++ *
++ * The channel is completely shut down (counter and IRQ disabled),
++ * and made available for re-use.  Returns zero, or negative errno.
++ */
++int pwm_channel_free(struct pwm_channel *ch)
 +{
-+	spin_lock(&user_lock);
-+	if (ssc->user) {
-+		ssc->user--;
-+		clk_disable(ssc->clk);
-+	} else {
-+		dev_dbg(&ssc->pdev->dev, "device already free\n");
++	unsigned long	flags;
++	int		t;
++
++	spin_lock_irqsave(&pwm->lock, flags);
++	t = pwmcheck(ch);
++	if (t >= 0) {
++		pwm->channel[t] = NULL;
++		pwm->handler[t] = NULL;
++
++		/* channel and irq are always disabled when we return */
++		pwm_writel(pwm, PWM_DIS, 1 << t);
++		pwm_writel(pwm, PWM_IDR, 1 << t);
++
++		clk_disable(pwm->clk);
++		t = 0;
 +	}
-+	spin_unlock(&user_lock);
++	spin_unlock_irqrestore(&pwm->lock, flags);
++	return t;
 +}
-+EXPORT_SYMBOL(ssc_free);
++EXPORT_SYMBOL(pwm_channel_free);
 +
-+static int __init ssc_probe(struct platform_device *pdev)
++int __pwm_channel_onoff(struct pwm_channel *ch, int enabled)
 +{
-+	int retval = 0;
-+	struct resource *regs;
-+	struct ssc_device *ssc;
++	unsigned long	flags;
++	int		t;
 +
-+	ssc = kzalloc(sizeof(struct ssc_device), GFP_KERNEL);
-+	if (!ssc) {
-+		dev_dbg(&pdev->dev, "out of memory\n");
-+		retval = -ENOMEM;
-+		goto out;
++	/* OMITTED FUNCTIONALITY:  starting several channels in synch */
++
++	spin_lock_irqsave(&pwm->lock, flags);
++	t = pwmcheck(ch);
++	if (t >= 0) {
++		pwm_writel(pwm, enabled ? PWM_ENA : PWM_DIS, 1 << t);
++		t = 0;
++		pwm_dumpregs(ch, enabled ? "enable" : "disable");
 +	}
++	spin_unlock_irqrestore(&pwm->lock, flags);
 +
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!regs) {
-+		dev_dbg(&pdev->dev, "no mmio resource defined\n");
-+		retval = -ENXIO;
-+		goto out_free;
++	return t;
++}
++EXPORT_SYMBOL(__pwm_channel_onoff);
++
++/**
++ * pwm_clk_alloc - allocate and configure CLKA or CLKB
++ * @prescale: from 0..10, the power of two used to divide MCK
++ * @div: from 1..255, the linear divisor to use
++ *
++ * Returns PWM_CPR_CLKA, PWM_CPR_CLKB, or negative errno.  The allocated
++ * clock will run with a period of (2^prescale * div) / MCK, or twice as
++ * long if center aligned PWM output is used.  The clock must later be
++ * deconfigured using pwm_clk_free().
++ */
++int pwm_clk_alloc(unsigned prescale, unsigned div)
++{
++	unsigned long	flags;
++	u32		mr;
++	u32		val = (prescale << 8) | div;
++	int		ret = -EBUSY;
++
++	if (prescale >= 10 || div == 0 || div > 255)
++		return -EINVAL;
++
++	spin_lock_irqsave(&pwm->lock, flags);
++	mr = pwm_readl(pwm, PWM_MR);
++	if ((mr & 0xffff) == 0) {
++		mr |= val;
++		ret = PWM_CPR_CLKA;
++	}
++	if ((mr & (0xffff << 16)) == 0) {
++		mr |= val << 16;
++		ret = PWM_CPR_CLKB;
++	}
++	if (ret > 0)
++		pwm_writel(pwm, PWM_MR, mr);
++	spin_unlock_irqrestore(&pwm->lock, flags);
++	return ret;
++}
++EXPORT_SYMBOL(pwm_clk_alloc);
++
++/**
++ * pwm_clk_free - deconfigure and release CLKA or CLKB
++ *
++ * Reverses the effect of pwm_clk_alloc().
++ */
++void pwm_clk_free(unsigned clk)
++{
++	unsigned long	flags;
++	u32		mr;
++
++	spin_lock_irqsave(&pwm->lock, flags);
++	mr = pwm_readl(pwm, PWM_MR);
++	if (clk == PWM_CPR_CLKA)
++		pwm_writel(pwm, PWM_MR, mr & ~(0xffff << 0));
++	if (clk == PWM_CPR_CLKB)
++		pwm_writel(pwm, PWM_MR, mr & ~(0xffff << 16));
++	spin_unlock_irqrestore(&pwm->lock, flags);
++}
++EXPORT_SYMBOL(pwm_clk_free);
++
++/**
++ * pwm_channel_handler - manage channel's IRQ handler
++ * @ch: the channel
++ * @handler: the handler to use, possibly NULL
++ *
++ * If the handler is non-null, the handler will be called after every
++ * period of this PWM channel.  If the handler is null, this channel
++ * won't generate an IRQ.
++ */
++int pwm_channel_handler(struct pwm_channel *ch,
++		void (*handler)(struct pwm_channel *ch))
++{
++	unsigned long	flags;
++	int		t;
++
++	spin_lock_irqsave(&pwm->lock, flags);
++	t = pwmcheck(ch);
++	if (t >= 0) {
++		pwm->handler[t] = handler;
++		pwm_writel(pwm, handler ? PWM_IER : PWM_IDR, 1 << t);
++		t = 0;
 +	}
++	spin_unlock_irqrestore(&pwm->lock, flags);
 +
-+	ssc->clk = clk_get(&pdev->dev, "pclk");
-+	if (IS_ERR(ssc->clk)) {
-+		dev_dbg(&pdev->dev, "no pclk clock defined\n");
-+		retval = -ENXIO;
-+		goto out_free;
++	return t;
++}
++EXPORT_SYMBOL(pwm_channel_handler);
++
++static irqreturn_t pwm_irq(int id, void *_pwm)
++{
++	struct pwm	*p = _pwm;
++	irqreturn_t	handled = IRQ_NONE;
++	u32		irqstat;
++	int		index;
++
++	spin_lock(&p->lock);
++
++	/* ack irqs, then handle them */
++	irqstat = pwm_readl(pwm, PWM_ISR);
++
++	while (irqstat) {
++		struct pwm_channel *ch;
++		void (*handler)(struct pwm_channel *ch);
++
++		index = ffs(irqstat) - 1;
++		irqstat &= ~(1 << index);
++		ch = pwm->channel[index];
++		handler = pwm->handler[index];
++		if (handler && ch) {
++			spin_unlock(&p->lock);
++			handler(ch);
++			spin_lock(&p->lock);
++			handled = IRQ_HANDLED;
++		}
 +	}
 +
-+	ssc->pdev = pdev;
-+	ssc->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+	if (!ssc->regs) {
-+		dev_dbg(&pdev->dev, "ioremap failed\n");
-+		retval = -EINVAL;
-+		goto out_clk;
++	spin_unlock(&p->lock);
++	return handled;
++}
++
++static int __init pwm_probe(struct platform_device *pdev)
++{
++	struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	int irq = platform_get_irq(pdev, 0);
++	u32 *mp = pdev->dev.platform_data;
++	struct pwm *p;
++	int status = -EIO;
++
++	if (pwm)
++		return -EBUSY;
++	if (!r || irq < 0 || !mp || !*mp)
++		return -ENODEV;
++	if (*mp & ~((1<<PWM_NCHAN)-1)) {
++		dev_warn(&pdev->dev, "mask 0x%x ... more than %d channels\n",
++			*mp, PWM_NCHAN);
++		return -EINVAL;
 +	}
 +
-+	/* disable all interrupts */
-+	clk_enable(ssc->clk);
-+	ssc_writel(ssc->regs, IDR, ~0UL);
-+	ssc_readl(ssc->regs, SR);
-+	clk_disable(ssc->clk);
++	p = kzalloc(sizeof(*p), GFP_KERNEL);
++	if (!p)
++		return -ENOMEM;
 +
-+	ssc->irq = platform_get_irq(pdev, 0);
-+	if (!ssc->irq) {
-+		dev_dbg(&pdev->dev, "could not get irq\n");
-+		retval = -ENXIO;
-+		goto out_unmap;
++	spin_lock_init(&p->lock);
++	p->pdev = pdev;
++	p->mask = *mp;
++	p->irq = irq;
++	p->base = ioremap(r->start, r->end - r->start + 1);
++	if (!p->base)
++		goto fail;
++	p->clk = clk_get(&pdev->dev, "mck");
++	if (IS_ERR(p->clk)) {
++		status = PTR_ERR(p->clk);
++		p->clk = NULL;
++		goto fail;
 +	}
 +
-+	spin_lock(&user_lock);
-+	list_add_tail(&ssc->list, &ssc_list);
-+	spin_unlock(&user_lock);
++	status = request_irq(irq, pwm_irq, 0, pdev->name, p);
++	if (status < 0)
++		goto fail;
 +
-+	platform_set_drvdata(pdev, ssc);
++	pwm = p;
++	platform_set_drvdata(pdev, p);
 +
-+	dev_info(&pdev->dev, "Atmel SSC device at 0x%p (irq %d)\n",
-+			ssc->regs, ssc->irq);
++	return 0;
 +
-+	goto out;
++fail:
++	if (p->clk)
++		clk_put(p->clk);
++	if (p->base)
++		iounmap(p->base);
 +
-+out_unmap:
-+	iounmap(ssc->regs);
-+out_clk:
-+	clk_put(ssc->clk);
-+out_free:
-+	kfree(ssc);
-+out:
-+	return retval;
++	kfree(p);
++	return status;
 +}
 +
-+static int __devexit ssc_remove(struct platform_device *pdev)
++static int __exit pwm_remove(struct platform_device *pdev)
 +{
-+	struct ssc_device *ssc = platform_get_drvdata(pdev);
++	struct pwm *p = platform_get_drvdata(pdev);
 +
-+	spin_lock(&user_lock);
-+	iounmap(ssc->regs);
-+	clk_put(ssc->clk);
-+	list_del(&ssc->list);
-+	kfree(ssc);
-+	spin_unlock(&user_lock);
++	if (p != pwm)
++		return -EINVAL;
++
++	clk_enable(pwm->clk);
++	pwm_writel(pwm, PWM_DIS, (1 << PWM_NCHAN) - 1);
++	pwm_writel(pwm, PWM_IDR, (1 << PWM_NCHAN) - 1);
++	clk_disable(pwm->clk);
++
++	pwm = NULL;
++
++	free_irq(p->irq, p);
++	clk_put(p->clk);
++	iounmap(p->base);
++	kfree(p);
 +
 +	return 0;
 +}
 +
-+static struct platform_driver ssc_driver = {
-+	.remove		= __devexit_p(ssc_remove),
-+	.driver		= {
-+		.name		= "ssc",
++static struct platform_driver atmel_pwm_driver = {
++	.driver = {
++		.name = "atmel_pwm",
++		.owner = THIS_MODULE,
 +	},
++	.remove = __exit_p(pwm_remove),
++
++	/* NOTE: PWM can keep running in AVR32 "idle" and "frozen" states;
++	 * and all AT91sam9263 states, albeit at reduced clock rate if
++	 * MCK becomes the slow clock (i.e. what Linux labels STR).
++	 */
 +};
 +
-+static int __init ssc_init(void)
++static int __init pwm_init(void)
 +{
-+	return platform_driver_probe(&ssc_driver, ssc_probe);
++	return platform_driver_probe(&atmel_pwm_driver, pwm_probe);
 +}
-+module_init(ssc_init);
++module_init(pwm_init);
 +
-+static void __exit ssc_exit(void)
++static void __exit pwm_exit(void)
 +{
-+	platform_driver_unregister(&ssc_driver);
++	platform_driver_unregister(&atmel_pwm_driver);
 +}
-+module_exit(ssc_exit);
++module_exit(pwm_exit);
 +
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("SSC driver for Atmel AVR32 and AT91");
++MODULE_DESCRIPTION("Driver for AT32/AT91 PWM module");
 +MODULE_LICENSE("GPL");
 diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
-index e23082f..1de1716 100644
+index 5fef678..4970b53 100644
 --- a/drivers/mmc/host/Kconfig
 +++ b/drivers/mmc/host/Kconfig
-@@ -74,6 +74,16 @@ config MMC_AT91
+@@ -91,6 +91,16 @@ config MMC_AT91
  
  	  If unsure, say N.
  
@@ -4762,22 +12445,23 @@ index e23082f..1de1716 100644
  	tristate "Motorola i.MX Multimedia Card Interface support"
  	depends on ARCH_IMX
 diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
-index 6685f64..4b8e6e2 100644
+index 3877c87..e80ea72 100644
 --- a/drivers/mmc/host/Makefile
 +++ b/drivers/mmc/host/Makefile
-@@ -14,5 +14,6 @@ obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
+@@ -15,6 +15,7 @@ obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
  obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
  obj-$(CONFIG_MMC_OMAP)		+= omap.o
  obj-$(CONFIG_MMC_AT91)		+= at91_mci.o
 +obj-$(CONFIG_MMC_ATMELMCI)	+= atmel-mci.o
  obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
+ obj-$(CONFIG_MMC_SPI)		+= mmc_spi.o
  
 diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
 new file mode 100644
-index 0000000..45323c9
+index 0000000..0b5ec58
 --- /dev/null
 +++ b/drivers/mmc/host/atmel-mci.c
-@@ -0,0 +1,1161 @@
+@@ -0,0 +1,1176 @@
 +/*
 + * Atmel MultiMedia Card Interface driver
 + *
@@ -4817,6 +12501,7 @@ index 0000000..45323c9
 +	EVENT_DATA_ERROR,
 +	EVENT_STOP_SENT,
 +	EVENT_STOP_COMPLETE,
++	EVENT_DMA_COMPLETE,
 +	EVENT_DMA_ERROR,
 +	EVENT_CARD_DETECT,
 +};
@@ -4883,6 +12568,8 @@ index 0000000..45323c9
 +	test_bit(EVENT_STOP_SENT, &host->completed_events)
 +#define mci_stop_is_complete(host)			\
 +	test_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_dma_is_complete(host)			\
++	test_bit(EVENT_DMA_COMPLETE, &host->completed_events)
 +#define mci_dma_error_is_complete(host)			\
 +	test_bit(EVENT_DMA_ERROR, &host->completed_events)
 +#define mci_card_detect_is_complete(host)			\
@@ -4931,6 +12618,8 @@ index 0000000..45323c9
 +	set_bit(EVENT_STOP_SENT, &host->completed_events)
 +#define mci_set_stop_complete(host)			\
 +	set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_set_dma_complete(host)			\
++	set_bit(EVENT_DMA_COMPLETE, &host->completed_events)
 +#define mci_set_dma_error_complete(host)		\
 +	set_bit(EVENT_DMA_ERROR, &host->completed_events)
 +#define mci_set_card_detect_complete(host)		\
@@ -5230,7 +12919,7 @@ index 0000000..45323c9
 +{
 +	u32 cmdr;
 +
-+	cmd->error = MMC_ERR_NONE;
++	cmd->error = 0;
 +
 +	cmdr = MCI_BF(CMDNB, cmd->opcode);
 +
@@ -5482,14 +13171,14 @@ index 0000000..45323c9
 +			struct mmc_command *cmd, u32 status)
 +{
 +	if (status & MCI_BIT(RTOE))
-+		cmd->error = MMC_ERR_TIMEOUT;
++		cmd->error = -ETIMEDOUT;
 +	else if ((cmd->flags & MMC_RSP_CRC)
 +			&& (status & MCI_BIT(RCRCE)))
-+		cmd->error = MMC_ERR_BADCRC;
++		cmd->error = -EILSEQ;
 +	else if (status & (MCI_BIT(RINDE) | MCI_BIT(RDIRE) | MCI_BIT(RENDE)))
-+		cmd->error = MMC_ERR_FAILED;
++		cmd->error = -EIO;
 +
-+	if (cmd->error != MMC_ERR_NONE) {
++	if (cmd->error) {
 +		dev_dbg(&host->mmc->class_dev,
 +				"command error: op=0x%x status=0x%08x\n",
 +				cmd->opcode, status);
@@ -5535,7 +13224,7 @@ index 0000000..45323c9
 +		mci_clear_data_pending(host);
 +
 +		/* DMA controller got bus error => invalid address */
-+		data->error = MMC_ERR_INVALID;
++		data->error = -EIO;
 +
 +		dev_dbg(&mmc->class_dev, "dma error after %u bytes xfered\n",
 +				host->data->bytes_xfered);
@@ -5558,13 +13247,13 @@ index 0000000..45323c9
 +
 +		if (status & MCI_BIT(DCRCE)) {
 +			dev_dbg(&mmc->class_dev, "data CRC error\n");
-+			data->error = MMC_ERR_BADCRC;
++			data->error = -EILSEQ;
 +		} else if (status & MCI_BIT(DTOE)) {
 +			dev_dbg(&mmc->class_dev, "data timeout error\n");
-+			data->error = MMC_ERR_TIMEOUT;
++			data->error = -ETIMEDOUT;
 +		} else {
 +			dev_dbg(&mmc->class_dev, "data FIFO error\n");
-+			data->error = MMC_ERR_FIFO;
++			data->error = -EIO;
 +		}
 +		dev_dbg(&mmc->class_dev, "bytes xfered: %u\n",
 +				data->bytes_xfered);
@@ -5592,16 +13281,16 @@ index 0000000..45323c9
 +		/* Clean up queue if present */
 +		if (mrq) {
 +			if (!mci_cmd_is_complete(host))
-+				mrq->cmd->error = MMC_ERR_TIMEOUT;
++				mrq->cmd->error = -ETIMEDOUT;
 +			if (mrq->data && !mci_data_is_complete(host)
 +			    && !mci_data_error_is_complete(host)) {
 +				dma_stop_request(host->dma.req.req.dmac,
 +						host->dma.req.req.channel);
-+				host->data->error = MMC_ERR_TIMEOUT;
++				host->data->error = -ETIMEDOUT;
 +				atmci_data_complete(host, data);
 +			}
 +			if (mrq->stop && !mci_stop_is_complete(host))
-+				mrq->stop->error = MMC_ERR_TIMEOUT;
++				mrq->stop->error = -ETIMEDOUT;
 +
 +			host->cmd = NULL;
 +			atmci_request_end(mmc, mrq);
@@ -5631,6 +13320,9 @@ index 0000000..45323c9
 +		host->stop_status = status;
 +		mci_set_stop_pending(host);
 +	} else {
++		if (host->mrq->stop && mci_dma_is_complete(host)
++				&& !mci_set_stop_sent_is_completed(host))
++			send_stop_cmd(host->mmc, host->data, 0);
 +		host->cmd_status = status;
 +		mci_set_cmd_pending(host);
 +	}
@@ -5649,7 +13341,14 @@ index 0000000..45323c9
 +	host = container_of(dma, struct atmel_mci, dma);
 +	data = host->data;
 +
-+	if (data->stop && !mci_set_stop_sent_is_completed(host))
++	/*
++	 * This callback may be called before we see the CMDRDY
++	 * interrupt under heavy irq load (possibly caused by other
++	 * drivers) or when interrupts are disabled for a long time.
++	 */
++	mci_set_dma_complete(host);
++	if (data->stop && mci_cmd_is_complete(host)
++			&& !mci_set_stop_sent_is_completed(host))
 +		send_stop_cmd(host->mmc, data, 0);
 +
 +	/*
@@ -6138,7 +13837,7 @@ index 0000000..60d15c4
 +
 +#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
 diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
-index 2f19fa7..94304ca 100644
+index 1707f98..d2ec6eb 100644
 --- a/drivers/mtd/chips/cfi_cmdset_0001.c
 +++ b/drivers/mtd/chips/cfi_cmdset_0001.c
 @@ -50,6 +50,7 @@
@@ -6149,7 +13848,7 @@ index 2f19fa7..94304ca 100644
  
  static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
  static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -156,6 +157,47 @@ static void cfi_tell_features(struct cfi_pri_intelext *extp)
+@@ -157,6 +158,47 @@ static void cfi_tell_features(struct cfi_pri_intelext *extp)
  }
  #endif
  
@@ -6197,7 +13896,7 @@ index 2f19fa7..94304ca 100644
  #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
  /* Some Intel Strata Flash prior to FPO revision C has bugs in this area */
  static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
-@@ -233,6 +275,7 @@ static void fixup_use_powerup_lock(struct mtd_info *mtd, void *param)
+@@ -234,6 +276,7 @@ static void fixup_use_powerup_lock(struct mtd_info *mtd, void *param)
  }
  
  static struct cfi_fixup cfi_fixup_table[] = {
@@ -6206,7 +13905,7 @@ index 2f19fa7..94304ca 100644
  	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL },
  #endif
 diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
-index 1f64458..205977b 100644
+index 389acc6..571226e 100644
 --- a/drivers/mtd/chips/cfi_cmdset_0002.c
 +++ b/drivers/mtd/chips/cfi_cmdset_0002.c
 @@ -185,6 +185,10 @@ static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
@@ -6236,2489 +13935,2156 @@ index 1f64458..205977b 100644
  	{ 0, 0, NULL, NULL }
  };
  static struct cfi_fixup jedec_fixup_table[] = {
-diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
-index b046974..bc90604 100644
---- a/drivers/spi/atmel_spi.c
-+++ b/drivers/spi/atmel_spi.c
-@@ -491,8 +491,8 @@ static int atmel_spi_setup(struct spi_device *spi)
- 		csr |= SPI_BIT(NCPHA);
+diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
+index 519b4ff..847f983 100644
+--- a/drivers/pcmcia/Kconfig
++++ b/drivers/pcmcia/Kconfig
+@@ -276,6 +276,13 @@ config ELECTRA_CF
+ 	  Say Y here to support the CompactFlash controller on the
+ 	  PA Semi Electra eval board.
  
- 	/* TODO: DLYBS and DLYBCT */
--	csr |= SPI_BF(DLYBS, 10);
--	csr |= SPI_BF(DLYBCT, 10);
-+	csr |= SPI_BF(DLYBS, 0);
-+	csr |= SPI_BF(DLYBCT, 0);
- 
- 	/* chipselect must have been muxed as GPIO (e.g. in board setup) */
- 	npcs_pin = (unsigned int)spi->controller_data;
-diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
-index 767aed5..f81d08d 100644
---- a/drivers/usb/gadget/Kconfig
-+++ b/drivers/usb/gadget/Kconfig
-@@ -67,6 +67,17 @@ config USB_GADGET_DEBUG_FILES
- 	   driver on a new board.   Enable these files by choosing "Y"
- 	   here.  If in doubt, or to conserve kernel memory, say "N".
- 
-+config USB_GADGET_DEBUG_FS
-+	boolean "Debugging information files in debugfs"
-+	depends on USB_GADGET && DEBUG_FS
++config AT32_CF
++	tristate "AT32AP CompactFlash Controller"
++	depends on PCMCIA && AVR32 && PLATFORM_AT32AP
 +	help
-+	   Some of the drivers in the "gadget" framework can expose
-+	   debugging information in files under /sys/kernel/debug/.
-+	   The information in these files may help when you're
-+	   troubleshooting or bringing up a driver on a new board.
-+	   Enable these files by choosing "Y" here.  If in doubt, or
-+	   to conserve kernel memory, say "N".
-+
- config	USB_GADGET_SELECTED
- 	boolean
- 
-@@ -103,6 +114,20 @@ config USB_AMD5536UDC
- 	default USB_GADGET
- 	select USB_GADGET_SELECTED
- 
-+config USB_GADGET_ATMEL_USBA
-+	boolean "Atmel USBA"
-+	select USB_GADGET_DUALSPEED
-+	depends on AVR32
-+	help
-+	  USBA is the integrated high-speed USB Device controller on
-+	  the AT32AP700x processors from Atmel.
-+
-+config USB_ATMEL_USBA
-+	tristate
-+	depends on USB_GADGET_ATMEL_USBA
-+	default USB_GADGET
-+	select USB_GADGET_SELECTED
-+
- config USB_GADGET_FSL_USB2
- 	boolean "Freescale Highspeed USB DR Peripheral Controller"
- 	depends on MPC834x || PPC_MPC831x
-@@ -228,7 +253,6 @@ config USB_LH7A40X
- 	default USB_GADGET
- 	select USB_GADGET_SELECTED
- 
--
- config USB_GADGET_OMAP
- 	boolean "OMAP USB Device Controller"
- 	depends on ARCH_OMAP
-diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
-index 1bc0f03..904e57b 100644
---- a/drivers/usb/gadget/Makefile
-+++ b/drivers/usb/gadget/Makefile
-@@ -14,6 +14,7 @@ obj-$(CONFIG_USB_OMAP)		+= omap_udc.o
- obj-$(CONFIG_USB_LH7A40X)	+= lh7a40x_udc.o
- obj-$(CONFIG_USB_S3C2410)	+= s3c2410_udc.o
- obj-$(CONFIG_USB_AT91)		+= at91_udc.o
-+obj-$(CONFIG_USB_ATMEL_USBA)	+= atmel_usba_udc.o
- obj-$(CONFIG_USB_FSL_USB2)	+= fsl_usb2_udc.o
- obj-$(CONFIG_USB_M66592)	+= m66592-udc.o
- 
-diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
++	  Say Y here to support the CompactFlash controller on AT32 chips.
++	  Or choose M to compile the driver as a module named "at32_cf".
++
+ config PCCARD_NONSTATIC
+ 	tristate
+ 
+diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
+index 6f6478b..3526fd8 100644
+--- a/drivers/pcmcia/Makefile
++++ b/drivers/pcmcia/Makefile
+@@ -38,6 +38,7 @@ obj-$(CONFIG_PCMCIA_VRC4173)			+= vrc4173_cardu.o
+ obj-$(CONFIG_OMAP_CF)				+= omap_cf.o
+ obj-$(CONFIG_AT91_CF)				+= at91_cf.o
+ obj-$(CONFIG_ELECTRA_CF)			+= electra_cf.o
++obj-$(CONFIG_AT32_CF)				+= at32_cf.o
+ 
+ sa11xx_core-y					+= soc_common.o sa11xx_base.o
+ pxa2xx_core-y					+= soc_common.o pxa2xx_base.o
+diff --git a/drivers/pcmcia/at32_cf.c b/drivers/pcmcia/at32_cf.c
 new file mode 100644
-index 0000000..e35362d
+index 0000000..010bdfd
 --- /dev/null
-+++ b/drivers/usb/gadget/atmel_usba_udc.c
-@@ -0,0 +1,2038 @@
++++ b/drivers/pcmcia/at32_cf.c
+@@ -0,0 +1,533 @@
 +/*
-+ * Driver for the Atmel USBA high speed USB device controller
++ * Driver for AVR32 Static Memory Controller: CompactFlash support
 + *
-+ * Copyright (C) 2005-2007 Atmel Corporation
++ * Copyright (C) 2006 Atmel Norway
 + *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++ * 02111-1307, USA.
++ *
++ * The full GNU General Public License is included in this
++ * distribution in the file called COPYING.
 + */
-+#include <linux/clk.h>
 +#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
 +#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
 +#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/list.h>
-+#include <linux/platform_device.h>
-+#include <linux/usb/ch9.h>
-+#include <linux/usb_gadget.h>
 +#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/err.h>
++#include <linux/clk.h>
++#include <linux/dma-mapping.h>
++
++#include <pcmcia/ss.h>
 +
 +#include <asm/gpio.h>
++#include <asm/io.h>
 +#include <asm/arch/board.h>
 +
-+#include "atmel_usba_udc.h"
-+
-+
-+static struct usba_udc the_udc;
++#include <asm/arch/smc.h>
 +
-+#ifdef CONFIG_USB_GADGET_DEBUG_FS
-+#include <linux/debugfs.h>
-+#include <linux/uaccess.h>
-+
-+static int queue_dbg_open(struct inode *inode, struct file *file)
-+{
-+	struct usba_ep *ep = inode->i_private;
-+	struct usba_request *req, *req_copy;
-+	struct list_head *queue_data;
-+
-+	queue_data = kmalloc(sizeof(*queue_data), GFP_KERNEL);
-+	if (!queue_data)
-+		return -ENOMEM;
-+	INIT_LIST_HEAD(queue_data);
-+
-+	spin_lock_irq(&ep->udc->lock);
-+	list_for_each_entry(req, &ep->queue, queue) {
-+		req_copy = kmalloc(sizeof(*req_copy), GFP_ATOMIC);
-+		if (!req_copy)
-+			goto fail;
-+		memcpy(req_copy, req, sizeof(*req_copy));
-+		list_add_tail(&req_copy->queue, queue_data);
-+	}
-+	spin_unlock_irq(&ep->udc->lock);
-+
-+	file->private_data = queue_data;
-+	return 0;
-+
-+fail:
-+	spin_unlock_irq(&ep->udc->lock);
-+	list_for_each_entry_safe(req, req_copy, queue_data, queue) {
-+		list_del(&req->queue);
-+		kfree(req);
-+	}
-+	kfree(queue_data);
-+	return -ENOMEM;
-+}
++struct at32_cf_socket {
++	struct pcmcia_socket	socket;
++	int			detect_pin;
++	int			reset_pin;
++	int			vcc_pin;
++	int			ready_pin;
++	struct resource		res_attr;
++	struct resource		res_mem;
++	struct resource		res_io;
++	struct smc_config	smc;
++	unsigned int		irq;
++	unsigned int		cf_cs;
++	socket_state_t		state;
++	unsigned		present:1;
++};
++#define to_at32_cf(sock) container_of(sock, struct at32_cf_socket, socket)
 +
 +/*
-+ * bbbbbbbb llllllll IZS sssss nnnn FDL\n\0
++ * We have the following memory layout relative to the base address:
 + *
-+ * b: buffer address
-+ * l: buffer length
-+ * I/i: interrupt/no interrupt
-+ * Z/z: zero/no zero
-+ * S/s: short ok/short not ok
-+ * s: status
-+ * n: nr_packets
-+ * F/f: submitted/not submitted to FIFO
-+ * D/d: using/not using DMA
-+ * L/l: last transaction/not last transaction
++ *   Alt IDE Mode:      00e0 0000 -> 00ff ffff
++ *   True IDE Mode:     00c0 0000 -> 00df ffff
++ *   I/O memory:        0080 0000 -> 00bf ffff
++ *   Common memory:     0040 0000 -> 007f ffff
++ *   Attribute memory:  0000 0000 -> 003f ffff
 + */
-+static ssize_t queue_dbg_read(struct file *file, char __user *buf,
-+		size_t nbytes, loff_t *ppos)
-+{
-+	struct list_head *queue = file->private_data;
-+	struct usba_request *req, *tmp_req;
-+	size_t len, remaining, actual = 0;
-+	char tmpbuf[38];
-+
-+	if (!access_ok(VERIFY_WRITE, buf, nbytes))
-+		return -EFAULT;
-+
-+	mutex_lock(&file->f_dentry->d_inode->i_mutex);
-+	list_for_each_entry_safe(req, tmp_req, queue, queue) {
-+		len = snprintf(tmpbuf, sizeof(tmpbuf),
-+				"%8p %08x %c%c%c %5d %c%c%c\n",
-+				req->req.buf, req->req.length,
-+				req->req.no_interrupt ? 'i' : 'I',
-+				req->req.zero ? 'Z' : 'z',
-+				req->req.short_not_ok ? 's' : 'S',
-+				req->req.status,
-+				req->submitted ? 'F' : 'f',
-+				req->using_dma ? 'D' : 'd',
-+				req->last_transaction ? 'L' : 'l');
-+		len = min(len, sizeof(tmpbuf));
-+		if (len > nbytes)
-+			break;
++#define CF_ATTR_OFFSET	0x00000000
++#define CF_MEM_OFFSET	0x00400000
++#define CF_IO_OFFSET	0x00800000
++#define CF_RES_SIZE	4096
 +
-+		list_del(&req->queue);
-+		kfree(req);
-+
-+		remaining = __copy_to_user(buf, tmpbuf, len);
-+		actual += len - remaining;
-+		if (remaining)
-+			break;
-+
-+		nbytes -= len;
-+		buf += len;
-+	}
-+	mutex_unlock(&file->f_dentry->d_inode->i_mutex);
++#ifdef DEBUG
 +
-+	return actual;
-+}
++static int pc_debug;
++module_param(pc_debug, int, 0644);
 +
-+static int queue_dbg_release(struct inode *inode, struct file *file)
++static void at32_cf_debug(struct at32_cf_socket *cf, const char *func,
++			  int level, const char *fmt, ...)
 +{
-+	struct list_head *queue_data = file->private_data;
-+	struct usba_request *req, *tmp_req;
++	va_list args;
 +
-+	list_for_each_entry_safe(req, tmp_req, queue_data, queue) {
-+		list_del(&req->queue);
-+		kfree(req);
++	if (pc_debug > level) {
++		printk(KERN_DEBUG "at32_cf/%u: %s: ", cf->cf_cs, func);
++		va_start(args, fmt);
++		vprintk(fmt, args);
++		va_end(args);
 +	}
-+	kfree(queue_data);
-+	return 0;
 +}
 +
-+static int regs_dbg_open(struct inode *inode, struct file *file)
-+{
-+	struct usba_udc *udc;
-+	unsigned int i;
-+	u32 *data;
-+	int ret = -ENOMEM;
-+
-+	mutex_lock(&inode->i_mutex);
-+	udc = inode->i_private;
-+	data = kmalloc(inode->i_size, GFP_KERNEL);
-+	if (!data)
-+		goto out;
-+
-+	spin_lock_irq(&udc->lock);
-+	for (i = 0; i < inode->i_size / 4; i++)
-+		data[i] = __raw_readl(udc->regs + i * 4);
-+	spin_unlock_irq(&udc->lock);
-+
-+	file->private_data = data;
-+	ret = 0;
-+
-+out:
-+	mutex_unlock(&inode->i_mutex);
++#define debug(cf, lvl, fmt, arg...)			\
++	at32_cf_debug(cf, __func__, lvl, fmt, ##arg)
 +
-+	return ret;
-+}
++#else
++#define debug(cf, lvl, fmt, arg...) do { } while (0)
++#endif
 +
-+static ssize_t regs_dbg_read(struct file *file, char __user *buf,
-+		size_t nbytes, loff_t *ppos)
++static inline int at32_cf_present(struct at32_cf_socket *cf)
 +{
-+	struct inode *inode = file->f_dentry->d_inode;
-+	int ret;
++	int present = 1;
 +
-+	mutex_lock(&inode->i_mutex);
-+	ret = simple_read_from_buffer(buf, nbytes, ppos,
-+			file->private_data,
-+			file->f_dentry->d_inode->i_size);
-+	mutex_unlock(&inode->i_mutex);
++	/* If we don't have a detect pin, assume the card is present */
++	if (cf->detect_pin >= 0)
++		present = !gpio_get_value(cf->detect_pin);
 +
-+	return ret;
++	return present;
 +}
 +
-+static int regs_dbg_release(struct inode *inode, struct file *file)
++static irqreturn_t at32_cf_irq(int irq, void *dev_id)
 +{
-+	kfree(file->private_data);
-+	return 0;
-+}
-+
-+const struct file_operations queue_dbg_fops = {
-+	.owner		= THIS_MODULE,
-+	.open		= queue_dbg_open,
-+	.llseek		= no_llseek,
-+	.read		= queue_dbg_read,
-+	.release	= queue_dbg_release,
-+};
++	struct at32_cf_socket *cf = dev_id;
++	unsigned int present;
 +
-+const struct file_operations regs_dbg_fops = {
-+	.owner		= THIS_MODULE,
-+	.open		= regs_dbg_open,
-+	.llseek		= generic_file_llseek,
-+	.read		= regs_dbg_read,
-+	.release	= regs_dbg_release,
-+};
-+
-+static void usba_ep_init_debugfs(struct usba_udc *udc,
-+		struct usba_ep *ep)
-+{
-+	struct dentry *ep_root;
-+
-+	ep_root = debugfs_create_dir(ep->ep.name, udc->debugfs_root);
-+	if (!ep_root)
-+		goto err_root;
-+	ep->debugfs_dir = ep_root;
-+
-+	ep->debugfs_queue = debugfs_create_file("queue", 0400, ep_root,
-+						ep, &queue_dbg_fops);
-+	if (!ep->debugfs_queue)
-+		goto err_queue;
-+
-+	if (ep->can_dma) {
-+		ep->debugfs_dma_status
-+			= debugfs_create_u32("dma_status", 0400, ep_root,
-+					&ep->last_dma_status);
-+		if (!ep->debugfs_dma_status)
-+			goto err_dma_status;
-+	}
-+	if (ep_is_control(ep)) {
-+		ep->debugfs_state
-+			= debugfs_create_u32("state", 0400, ep_root,
-+					&ep->state);
-+		if (!ep->debugfs_state)
-+			goto err_state;
++	present = at32_cf_present(cf);
++	if (present != cf->present) {
++		cf->present = present;
++		debug(cf, 3, "card %s\n", present ? "present" : "gone");
++		pcmcia_parse_events(&cf->socket, SS_DETECT);
 +	}
 +
-+	return;
-+
-+err_state:
-+	if (ep->can_dma)
-+		debugfs_remove(ep->debugfs_dma_status);
-+err_dma_status:
-+	debugfs_remove(ep->debugfs_queue);
-+err_queue:
-+	debugfs_remove(ep_root);
-+err_root:
-+	dev_err(&ep->udc->pdev->dev,
-+		"failed to create debugfs directory for %s\n", ep->ep.name);
-+}
-+
-+static void usba_ep_cleanup_debugfs(struct usba_ep *ep)
-+{
-+	debugfs_remove(ep->debugfs_queue);
-+	debugfs_remove(ep->debugfs_dma_status);
-+	debugfs_remove(ep->debugfs_state);
-+	debugfs_remove(ep->debugfs_dir);
-+	ep->debugfs_dma_status = NULL;
-+	ep->debugfs_dir = NULL;
++	return IRQ_HANDLED;
 +}
 +
-+static void usba_init_debugfs(struct usba_udc *udc)
++static int at32_cf_get_status(struct pcmcia_socket *sock, u_int *value)
 +{
-+	struct dentry *root, *regs;
-+	struct resource *regs_resource;
-+
-+	root = debugfs_create_dir(udc->gadget.name, NULL);
-+	if (IS_ERR(root) || !root)
-+		goto err_root;
-+	udc->debugfs_root = root;
-+
-+	regs = debugfs_create_file("regs", 0400, root, udc, &regs_dbg_fops);
-+	if (!regs)
-+		goto err_regs;
++	struct at32_cf_socket *cf;
++	u_int status = 0;
 +
-+	regs_resource = platform_get_resource(udc->pdev, IORESOURCE_MEM,
-+				CTRL_IOMEM_ID);
-+	regs->d_inode->i_size = regs_resource->end - regs_resource->start + 1;
-+	udc->debugfs_regs = regs;
++	cf = container_of(sock, struct at32_cf_socket, socket);
 +
-+	usba_ep_init_debugfs(udc, to_usba_ep(udc->gadget.ep0));
-+
-+	return;
++	if (at32_cf_present(cf)) {
++		/* NOTE: gpio on AP7xxx is 3.3V */
++		status = SS_DETECT | SS_3VCARD;
++		if (cf->ready_pin < 0 || gpio_get_value(cf->ready_pin))
++			status |= SS_READY;
++		if (cf->vcc_pin < 0 || gpio_get_value(cf->vcc_pin))
++			status |= SS_POWERON;
++	}
 +
-+err_regs:
-+	debugfs_remove(root);
-+err_root:
-+	udc->debugfs_root = NULL;
-+	dev_err(&udc->pdev->dev, "debugfs is not available\n");
++	*value = status;
++	return 0;
 +}
 +
-+static void usba_cleanup_debugfs(struct usba_udc *udc)
-+{
-+	usba_ep_cleanup_debugfs(to_usba_ep(udc->gadget.ep0));
-+	debugfs_remove(udc->debugfs_regs);
-+	debugfs_remove(udc->debugfs_root);
-+	udc->debugfs_regs = NULL;
-+	udc->debugfs_root = NULL;
-+}
-+#else
-+static inline void usba_ep_init_debugfs(struct usba_udc *udc,
-+					 struct usba_ep *ep)
++static int at32_cf_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
 +{
++	struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
 +
-+}
++	debug(cf, 2, "mask: %s%s%s%s%s%sflags: %s%s%s%s%s%sVcc %d Vpp %d irq %d\n",
++			(state->csc_mask==0)?"<NONE> ":"",
++			(state->csc_mask&SS_DETECT)?"DETECT ":"",
++			(state->csc_mask&SS_READY)?"READY ":"",
++			(state->csc_mask&SS_BATDEAD)?"BATDEAD ":"",
++			(state->csc_mask&SS_BATWARN)?"BATWARN ":"",
++			(state->csc_mask&SS_STSCHG)?"STSCHG ":"",
++			(state->flags==0)?"<NONE> ":"",
++			(state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"",
++			(state->flags&SS_IOCARD)?"IOCARD ":"",
++			(state->flags&SS_RESET)?"RESET ":"",
++			(state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"",
++			(state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"",
++			state->Vcc, state->Vpp, state->io_irq);
 +
-+static inline void usba_ep_cleanup_debugfs(struct usba_ep *ep)
-+{
++	/*
++	 * TODO: Allow boards to override this in case they have level
++	 * converters.
++	 */
++	switch (state->Vcc) {
++	case 0:
++		if (cf->vcc_pin >= 0)
++			gpio_set_value(cf->vcc_pin, 0);
++		break;
++	case 33:
++		if (cf->vcc_pin >= 0)
++			gpio_set_value(cf->vcc_pin, 1);
++		break;
++	default:
++		return -EINVAL;
++	}
 +
-+}
++	if (cf->reset_pin >= 0)
++		gpio_set_value(cf->reset_pin, state->flags & SS_RESET);
 +
-+static inline void usba_init_debugfs(struct usba_udc *udc)
-+{
++	cf->state = *state;
 +
++	return 0;
 +}
 +
-+static inline void usba_cleanup_debugfs(struct usba_udc *udc)
++static int at32_cf_socket_init(struct pcmcia_socket *sock)
 +{
++	debug(to_at32_cf(sock), 2, "called\n");
 +
++	return 0;
 +}
-+#endif
 +
-+static int vbus_is_present(struct usba_udc *udc)
++static int at32_cf_suspend(struct pcmcia_socket *sock)
 +{
-+	if (udc->vbus_pin != -1)
-+		return gpio_get_value(udc->vbus_pin);
++	debug(to_at32_cf(sock), 2, "called\n");
 +
-+	/* No Vbus detection: Assume always present */
-+	return 1;
-+}
++	at32_cf_set_socket(sock, &dead_socket);
 +
-+static void copy_to_fifo(void __iomem *fifo, const void *buf, int len)
-+{
-+	unsigned long tmp;
-+
-+	DBG(DBG_FIFO, "copy to FIFO (len %d):\n", len);
-+	for (; len > 0; len -= 4, buf += 4, fifo += 4) {
-+		tmp = *(unsigned long *)buf;
-+		if (len >= 4) {
-+			DBG(DBG_FIFO, "  -> %08lx\n", tmp);
-+			__raw_writel(tmp, fifo);
-+		} else {
-+			do {
-+				DBG(DBG_FIFO, "  -> %02lx\n", tmp >> 24);
-+				__raw_writeb(tmp >> 24, fifo);
-+				fifo++;
-+				tmp <<= 8;
-+			} while (--len);
-+			break;
-+		}
-+	}
++	return 0;
 +}
 +
-+static void copy_from_fifo(void *buf, void __iomem *fifo, int len)
++static int at32_cf_set_io_map(struct pcmcia_socket *sock,
++			      struct pccard_io_map *map)
 +{
-+	union {
-+		unsigned long *w;
-+		unsigned char *b;
-+	} p;
-+	unsigned long tmp;
++	struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
++	int retval;
 +
-+	DBG(DBG_FIFO, "copy from FIFO (len %d):\n", len);
-+	for (p.w = buf; len > 0; len -= 4, p.w++, fifo += 4) {
-+		if (len >= 4) {
-+			tmp = __raw_readl(fifo);
-+			*p.w = tmp;
-+			DBG(DBG_FIFO, "  -> %08lx\n", tmp);
-+		} else {
-+			do {
-+				tmp = __raw_readb(fifo);
-+				*p.b = tmp;
-+				DBG(DBG_FIFO, " -> %02lx\n", tmp);
-+				fifo++, p.b++;
-+			} while (--len);
-+		}
-+	}
-+}
++	debug(cf, 2, "map %u  speed %u start 0x%08x stop 0x%08x\n",
++		map->map, map->speed, map->start, map->stop);
++	debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
++		(map->flags == 0) ? "<NONE>":"",
++		(map->flags & MAP_ACTIVE) ? "ACTIVE " : "",
++		(map->flags & MAP_16BIT) ? "16BIT " : "",
++		(map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "",
++		(map->flags & MAP_0WS) ? "0WS " : "",
++		(map->flags & MAP_WRPROT) ? "WRPROT " : "",
++		(map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "",
++		(map->flags & MAP_PREFETCH) ? "PREFETCH " : "");
++
++	map->flags &= MAP_ACTIVE | MAP_16BIT | MAP_USE_WAIT;
++
++	if (map->flags & MAP_16BIT)
++		cf->smc.bus_width = 2;
++	else
++		cf->smc.bus_width = 1;
 +
-+static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req)
-+{
-+	unsigned int transaction_len;
++	if (map->flags & MAP_USE_WAIT)
++		cf->smc.nwait_mode = 3;
++	else
++		cf->smc.nwait_mode = 0;
 +
-+	transaction_len = req->req.length - req->req.actual;
-+	req->last_transaction = 1;
-+	if (transaction_len > ep->ep.maxpacket) {
-+		transaction_len = ep->ep.maxpacket;
-+		req->last_transaction = 0;
-+	} else if (transaction_len == ep->ep.maxpacket && req->req.zero)
-+		req->last_transaction = 0;
++	retval = smc_set_configuration(cf->cf_cs, &cf->smc);
++	if (retval) {
++		printk(KERN_ERR "at32_cf: could not set up SMC for I/O\n");
++		return retval;
++	}
 +
-+	DBG(DBG_QUEUE, "%s: submit_transaction, req %p (length %d)%s\n",
-+		ep->ep.name, req, transaction_len,
-+		req->last_transaction ? ", done" : "");
++	map->start = cf->socket.io_offset;
++	map->stop = map->start + CF_RES_SIZE - 1;
 +
-+	copy_to_fifo(ep->fifo, req->req.buf + req->req.actual, transaction_len);
-+	usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
-+	req->req.actual += transaction_len;
++	return 0;
 +}
 +
-+static void submit_request(struct usba_ep *ep, struct usba_request *req)
++static int
++at32_cf_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map)
 +{
-+	DBG(DBG_QUEUE, "%s: submit_request: req %p (length %d)\n",
-+		ep->ep.name, req, req->req.length);
++	struct at32_cf_socket *cf;
++	struct resource *res;
++	int retval;
 +
-+	req->req.actual = 0;
-+	req->submitted = 1;
++	cf = container_of(sock, struct at32_cf_socket, socket);
++
++	debug(cf, 2, "map %u speed %u card_start %08x\n",
++		map->map, map->speed, map->card_start);
++	debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
++		(map->flags==0)?"<NONE>":"",
++		(map->flags&MAP_ACTIVE)?"ACTIVE ":"",
++		(map->flags&MAP_16BIT)?"16BIT ":"",
++		(map->flags&MAP_AUTOSZ)?"AUTOSZ ":"",
++		(map->flags&MAP_0WS)?"0WS ":"",
++		(map->flags&MAP_WRPROT)?"WRPROT ":"",
++		(map->flags&MAP_ATTRIB)?"ATTRIB ":"",
++		(map->flags&MAP_USE_WAIT)?"USE_WAIT ":"");
++
++	if (map->card_start)
++		return -EINVAL;
 +
-+	if (req->using_dma) {
-+		if (req->req.length == 0) {
-+			usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
-+			return;
-+		}
++	map->flags &= MAP_ACTIVE | MAP_ATTRIB | MAP_16BIT | MAP_USE_WAIT;
 +
-+		if (req->req.zero)
-+			usba_ep_writel(ep, CTL_ENB, USBA_SHORT_PACKET);
-+		else
-+			usba_ep_writel(ep, CTL_DIS, USBA_SHORT_PACKET);
++	if (map->flags & MAP_ATTRIB) {
++		res = &cf->res_attr;
 +
-+		usba_dma_writel(ep, ADDRESS, req->req.dma);
-+		usba_dma_writel(ep, CONTROL, req->ctrl);
++		/* Linksys WCF12 seems to use WAIT when reading CIS */
++		map->flags |= MAP_USE_WAIT;
 +	} else {
-+		next_fifo_transaction(ep, req);
-+		if (req->last_transaction) {
-+			usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
-+			usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
-+		} else {
-+			usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
-+			usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
-+		}
++		res = &cf->res_mem;
 +	}
-+}
 +
-+static void submit_next_request(struct usba_ep *ep)
-+{
-+	struct usba_request *req;
++	if (map->flags & MAP_USE_WAIT)
++		cf->smc.nwait_mode = 3;
++	else
++		cf->smc.nwait_mode = 0;
 +
-+	if (list_empty(&ep->queue)) {
-+		usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY | USBA_RX_BK_RDY);
-+		return;
++	retval = smc_set_configuration(cf->cf_cs, &cf->smc);
++	if (retval) {
++		printk(KERN_ERR "at32_cf: could not set up SMC for mem\n");
++		return retval;
 +	}
 +
-+	req = list_entry(ep->queue.next, struct usba_request, queue);
-+	if (!req->submitted)
-+		submit_request(ep, req);
-+}
++	map->static_start = res->start;
 +
-+static void send_status(struct usba_udc *udc, struct usba_ep *ep)
-+{
-+	ep->state = STATUS_STAGE_IN;
-+	usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
-+	usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
++	return 0;
 +}
 +
-+static void receive_data(struct usba_ep *ep)
-+{
-+	struct usba_udc *udc = ep->udc;
-+	struct usba_request *req;
-+	unsigned long status;
-+	unsigned int bytecount, nr_busy;
-+	int is_complete = 0;
-+
-+	status = usba_ep_readl(ep, STA);
-+	nr_busy = USBA_BFEXT(BUSY_BANKS, status);
-+
-+	DBG(DBG_QUEUE, "receive data: nr_busy=%u\n", nr_busy);
-+
-+	while (nr_busy > 0) {
-+		if (list_empty(&ep->queue)) {
-+			usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
-+			break;
-+		}
-+		req = list_entry(ep->queue.next,
-+				 struct usba_request, queue);
-+
-+		bytecount = USBA_BFEXT(BYTE_COUNT, status);
-+
-+		if (status & (1 << 31))
-+			is_complete = 1;
-+		if (req->req.actual + bytecount >= req->req.length) {
-+			is_complete = 1;
-+			bytecount = req->req.length - req->req.actual;
-+		}
-+
-+		copy_from_fifo(req->req.buf + req->req.actual,
-+				ep->fifo, bytecount);
-+		req->req.actual += bytecount;
-+
-+		usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
-+
-+		if (is_complete) {
-+			DBG(DBG_QUEUE, "%s: request done\n", ep->ep.name);
-+			req->req.status = 0;
-+			list_del_init(&req->queue);
-+			usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
-+			spin_unlock(&udc->lock);
-+			req->req.complete(&ep->ep, &req->req);
-+			spin_lock(&udc->lock);
-+		}
-+
-+		status = usba_ep_readl(ep, STA);
-+		nr_busy = USBA_BFEXT(BUSY_BANKS, status);
-+
-+		if (is_complete && ep_is_control(ep)) {
-+			send_status(udc, ep);
-+			break;
-+		}
-+	}
-+}
++static struct pccard_operations at32_cf_ops = {
++	.init			= at32_cf_socket_init,
++	.suspend		= at32_cf_suspend,
++	.get_status		= at32_cf_get_status,
++	.set_socket		= at32_cf_set_socket,
++	.set_io_map		= at32_cf_set_io_map,
++	.set_mem_map		= at32_cf_set_mem_map,
++};
 +
-+static void
-+request_complete(struct usba_ep *ep, struct usba_request *req, int status)
++static int __init request_pin(struct platform_device *pdev,
++			      unsigned int pin, const char *name)
 +{
-+	struct usba_udc *udc = ep->udc;
-+
-+	WARN_ON(!list_empty(&req->queue));
-+
-+	if (req->req.status == -EINPROGRESS)
-+		req->req.status = status;
-+
-+	if (req->mapped) {
-+		dma_unmap_single(
-+			&udc->pdev->dev, req->req.dma, req->req.length,
-+			ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-+		req->req.dma = DMA_ADDR_INVALID;
-+		req->mapped = 0;
++	if (gpio_request(pin, name)) {
++		dev_warn(&pdev->dev, "failed to request %s pin\n", name);
++		return -1;
 +	}
 +
-+	DBG(DBG_GADGET | DBG_REQ,
-+		"%s: req %p complete: status %d, actual %u\n",
-+		ep->ep.name, req, req->req.status, req->req.actual);
-+
-+	spin_unlock(&udc->lock);
-+	req->req.complete(&ep->ep, &req->req);
-+	spin_lock(&udc->lock);
++	return pin;
 +}
 +
-+static void
-+request_complete_list(struct usba_ep *ep, struct list_head *list, int status)
-+{
-+	struct usba_request *req, *tmp_req;
++static struct smc_timing at32_cf_timing __initdata = {
++	.ncs_read_setup		= 30,
++	.nrd_setup		= 100,
++	.ncs_write_setup	= 30,
++	.nwe_setup		= 100,
 +
-+	list_for_each_entry_safe(req, tmp_req, list, queue) {
-+		list_del_init(&req->queue);
-+		request_complete(ep, req, status);
-+	}
-+}
++	.ncs_read_pulse		= 360,
++	.nrd_pulse		= 290,
++	.ncs_write_pulse	= 360,
++	.nwe_pulse		= 290,
 +
-+static int
-+usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
-+{
-+	struct usba_ep *ep = to_usba_ep(_ep);
-+	struct usba_udc *udc = ep->udc;
-+	unsigned long flags, ept_cfg, maxpacket;
-+	unsigned int nr_trans;
-+
-+	DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep->ep.name, desc);
-+
-+	maxpacket = le16_to_cpu(desc->wMaxPacketSize) & 0x7ff;
++	.read_cycle		= 420,
++	.write_cycle		= 420,
++};
 +
-+	if (((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != ep->index)
-+			|| ep->index == 0
-+			|| desc->bDescriptorType != USB_DT_ENDPOINT
-+			|| maxpacket == 0
-+			|| maxpacket > ep->fifo_size) {
-+		DBG(DBG_ERR, "ep_enable: Invalid argument");
-+		return -EINVAL;
-+	}
++static int __init at32_cf_probe(struct platform_device *pdev)
++{
++	struct at32_cf_socket	*cf;
++	struct cf_platform_data	*board = pdev->dev.platform_data;
++	struct resource		*res_skt;
++	int			irq;
++	int			ret;
 +
-+	ep->is_isoc = 0;
-+	ep->is_in = 0;
++	dev_dbg(&pdev->dev, "probe");
 +
-+	if (maxpacket <= 8)
-+		ept_cfg = USBA_BF(EPT_SIZE, USBA_EPT_SIZE_8);
-+	else
-+		/* LSB is bit 1, not 0 */
-+		ept_cfg = USBA_BF(EPT_SIZE, fls(maxpacket - 1) - 3);
++	if (!board)
++		return -ENXIO;
 +
-+	DBG(DBG_HW, "%s: EPT_SIZE = %lu (maxpacket = %lu)\n",
-+			ep->ep.name, ept_cfg, maxpacket);
++	res_skt = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res_skt)
++		return -ENXIO;
 +
-+	if ((desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
-+		ep->is_in = 1;
-+		ept_cfg |= USBA_EPT_DIR_IN;
-+	}
++	irq = platform_get_irq(pdev, 0);
++	if (irq < 0)
++		return irq;
 +
-+	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
-+	case USB_ENDPOINT_XFER_CONTROL:
-+		ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL);
-+		ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE);
-+		break;
-+	case USB_ENDPOINT_XFER_ISOC:
-+		if (!ep->can_isoc) {
-+			DBG(DBG_ERR, "ep_enable: %s is not isoc capable\n",
-+					ep->ep.name);
-+			return -EINVAL;
-+		}
++	cf = kzalloc(sizeof(struct at32_cf_socket), GFP_KERNEL);
++	if (!cf)
++		return -ENOMEM;
 +
-+		/*
-+		 * Bits 11:12 specify number of _additional_
-+		 * transactions per microframe.
-+		 */
-+		nr_trans = ((le16_to_cpu(desc->wMaxPacketSize) >> 11) & 3) + 1;
-+		if (nr_trans > 3)
-+			return -EINVAL;
++	cf->detect_pin = -1;
++	cf->reset_pin = -1;
++	cf->vcc_pin = -1;
++	cf->ready_pin = -1;
++	cf->cf_cs = board->cs;
++
++	if (board->detect_pin != GPIO_PIN_NONE)
++		cf->detect_pin = request_pin(pdev, board->detect_pin,
++					     "cf_detect");
++	if (board->reset_pin != GPIO_PIN_NONE)
++		cf->reset_pin = request_pin(pdev, board->reset_pin,
++					    "cf_reset");
++	if (board->vcc_pin != GPIO_PIN_NONE)
++		cf->vcc_pin = request_pin(pdev, board->vcc_pin,
++					  "cf_vcc");
++	if (board->ready_pin != GPIO_PIN_NONE)
++		/* READY is also used for irq through EIM */
++		cf->ready_pin = board->ready_pin;
++
++	debug(cf, 2, "pins: detect=%d reset=%d vcc=%d\n",
++	      cf->detect_pin, cf->reset_pin, cf->vcc_pin);
++
++	cf->socket.pci_irq = irq;
++	cf->socket.ops = &at32_cf_ops;
++	cf->socket.resource_ops = &pccard_static_ops;
++	cf->socket.dev.parent = &pdev->dev;
++	cf->socket.owner = THIS_MODULE;
++	cf->socket.features =
++		SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
++	cf->socket.map_size = CF_RES_SIZE;
++
++	cf->res_attr.start = res_skt->start + CF_ATTR_OFFSET;
++	cf->res_attr.end = cf->res_attr.start + CF_RES_SIZE - 1;
++	cf->res_attr.name = "attribute";
++	cf->res_attr.flags = IORESOURCE_MEM;
++	ret = request_resource(res_skt, &cf->res_attr);
++	if (ret)
++		goto err_request_res_attr;
 +
-+		ep->is_isoc = 1;
-+		ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_ISO);
++	cf->res_mem.start = res_skt->start + CF_MEM_OFFSET;
++	cf->res_mem.end = cf->res_mem.start + CF_RES_SIZE - 1;
++	cf->res_mem.name = "memory";
++	cf->res_mem.flags = IORESOURCE_MEM;
++	ret = request_resource(res_skt, &cf->res_mem);
++	if (ret)
++		goto err_request_res_mem;
 +
-+		/*
-+		 * Do triple-buffering on high-bandwidth iso endpoints.
-+		 */
-+		if (nr_trans > 1 && ep->nr_banks == 3)
-+			ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_TRIPLE);
-+		else
-+			ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE);
-+		ept_cfg |= USBA_BF(NB_TRANS, nr_trans);
-+		break;
-+	case USB_ENDPOINT_XFER_BULK:
-+		ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK);
-+		ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE);
-+		break;
-+	case USB_ENDPOINT_XFER_INT:
-+		ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_INT);
-+		ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE);
-+		break;
-+	}
++	cf->res_io.start = res_skt->start + CF_IO_OFFSET;
++	cf->res_io.end = cf->res_io.start + CF_RES_SIZE - 1;
++	cf->res_io.name = "io";
++	cf->res_io.flags = IORESOURCE_MEM;
++	ret = request_resource(res_skt, &cf->res_io);
++	if (ret)
++		goto err_request_res_io;
 +
-+	spin_lock_irqsave(&ep->udc->lock, flags);
++	cf->socket.io_offset = cf->res_io.start;
 +
-+	if (ep->desc) {
-+		spin_unlock_irqrestore(&ep->udc->lock, flags);
-+		DBG(DBG_ERR, "ep%d already enabled\n", ep->index);
-+		return -EBUSY;
++	if (cf->detect_pin >= 0) {
++		ret = request_irq(gpio_to_irq(cf->detect_pin), at32_cf_irq,
++				  IRQF_SHARED, "cf_detect", cf);
++		if (ret) {
++			debug(cf, 1,
++			      "failed to request cf_detect interrupt\n");
++			goto err_detect_irq;
++		}
 +	}
 +
-+	ep->desc = desc;
-+	ep->ep.maxpacket = maxpacket;
++	cf->present = at32_cf_present(cf);
 +
-+	usba_ep_writel(ep, CFG, ept_cfg);
-+	usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
++	/* Setup SMC timings */
++	smc_set_timing(&cf->smc, &at32_cf_timing);
 +
-+	if (ep->can_dma) {
-+		u32 ctrl;
++	cf->smc.bus_width = 2;
++	cf->smc.nrd_controlled = 1;
++	cf->smc.nwe_controlled = 1;
++	cf->smc.nwait_mode = 0;
++	cf->smc.byte_write = 0;
++	cf->smc.tdf_cycles = 8;
++	cf->smc.tdf_mode = 0;
 +
-+		usba_writel(udc, INT_ENB,
-+				(usba_readl(udc, INT_ENB)
-+					| USBA_BF(EPT_INT, 1 << ep->index)
-+					| USBA_BF(DMA_INT, 1 << ep->index)));
-+		ctrl = USBA_AUTO_VALID | USBA_INTDIS_DMA;
-+		usba_ep_writel(ep, CTL_ENB, ctrl);
-+	} else {
-+		usba_writel(udc, INT_ENB,
-+				(usba_readl(udc, INT_ENB)
-+					| USBA_BF(EPT_INT, 1 << ep->index)));
++	ret = smc_set_configuration(cf->cf_cs, &cf->smc);
++	if (ret) {
++		debug(cf, 1, "failed to configure SMC\n", ret);
++		goto err_smc;
 +	}
 +
-+	spin_unlock_irqrestore(&udc->lock, flags);
-+
-+	DBG(DBG_HW, "EPT_CFG%d after init: %#08lx\n", ep->index,
-+			(unsigned long)usba_ep_readl(ep, CFG));
-+	DBG(DBG_HW, "INT_ENB after init: %#08lx\n",
-+			(unsigned long)usba_readl(udc, INT_ENB));
-+
-+	return 0;
-+}
-+
-+static int usba_ep_disable(struct usb_ep *_ep)
-+{
-+	struct usba_ep *ep = to_usba_ep(_ep);
-+	struct usba_udc *udc = ep->udc;
-+	LIST_HEAD(req_list);
-+	unsigned long flags;
-+
-+	DBG(DBG_GADGET, "ep_disable: %s\n", ep->ep.name);
-+
-+	spin_lock_irqsave(&udc->lock, flags);
-+
-+	if (!ep->desc) {
-+		spin_unlock_irqrestore(&udc->lock, flags);
-+		DBG(DBG_ERR, "ep_disable: %s not enabled\n", ep->ep.name);
-+		return -EINVAL;
++	ret = pcmcia_register_socket(&cf->socket);
++	if (ret) {
++		debug(cf, 1, "failed to register socket: %d\n", ret);
++		goto err_register_socket;
 +	}
-+	ep->desc = NULL;
 +
-+	list_splice_init(&ep->queue, &req_list);
-+	if (ep->can_dma) {
-+		usba_dma_writel(ep, CONTROL, 0);
-+		usba_dma_writel(ep, ADDRESS, 0);
-+		usba_dma_readl(ep, STATUS);
-+	}
-+	usba_ep_writel(ep, CTL_DIS, USBA_EPT_ENABLE);
-+	usba_writel(udc, INT_ENB,
-+			usba_readl(udc, INT_ENB)
-+			& ~USBA_BF(EPT_INT, 1 << ep->index));
++	if (cf->reset_pin >= 0)
++		gpio_direction_output(cf->reset_pin, 0);
 +
-+	request_complete_list(ep, &req_list, -ESHUTDOWN);
++	platform_set_drvdata(pdev, cf);
 +
-+	spin_unlock_irqrestore(&udc->lock, flags);
++	dev_info(&pdev->dev, "Atmel SMC CF interface at 0x%08lx\n",
++		 (unsigned long)res_skt->start);
 +
 +	return 0;
-+}
-+
-+static struct usb_request *
-+usba_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
-+{
-+	struct usba_request *req;
-+
-+	DBG(DBG_GADGET, "ep_alloc_request: %p, 0x%x\n", _ep, gfp_flags);
 +
-+	req = kzalloc(sizeof(*req), gfp_flags);
-+	if (!req)
-+		return NULL;
-+
-+	INIT_LIST_HEAD(&req->queue);
-+	req->req.dma = DMA_ADDR_INVALID;
++err_register_socket:
++err_smc:
++	if (cf->detect_pin >= 0)
++		free_irq(gpio_to_irq(cf->detect_pin), cf);
++err_detect_irq:
++	release_resource(&cf->res_io);
++err_request_res_io:
++	release_resource(&cf->res_mem);
++err_request_res_mem:
++	release_resource(&cf->res_attr);
++err_request_res_attr:
++	if (cf->vcc_pin >= 0)
++		gpio_free(cf->vcc_pin);
++	if (cf->reset_pin >= 0)
++		gpio_free(cf->reset_pin);
++	if (cf->detect_pin >= 0)
++		gpio_free(cf->detect_pin);
++	kfree(cf);
 +
-+	return &req->req;
-+}
-+
-+static void
-+usba_ep_free_request(struct usb_ep *_ep, struct usb_request *_req)
-+{
-+	struct usba_request *req = to_usba_req(_req);
-+
-+	DBG(DBG_GADGET, "ep_free_request: %p, %p\n", _ep, _req);
-+
-+	kfree(req);
++	return ret;
 +}
 +
-+static int queue_dma(struct usba_udc *udc, struct usba_ep *ep,
-+		struct usba_request *req, gfp_t gfp_flags)
++static int __exit at32_cf_remove(struct platform_device *pdev)
 +{
-+	unsigned long flags;
-+	int ret;
-+
-+	DBG(DBG_DMA, "%s: req l/%u d/%08x %c%c%c\n",
-+		ep->ep.name, req->req.length, req->req.dma,
-+		req->req.zero ? 'Z' : 'z',
-+		req->req.short_not_ok ? 'S' : 's',
-+		req->req.no_interrupt ? 'I' : 'i');
-+
-+	if (req->req.length > 0x10000) {
-+		/* Lengths from 0 to 65536 (inclusive) are supported */
-+		DBG(DBG_ERR, "invalid request length %u\n", req->req.length);
-+		return -EINVAL;
-+	}
-+
-+	req->using_dma = 1;
++	struct at32_cf_socket *cf = platform_get_drvdata(pdev);
 +
-+	if (req->req.dma == DMA_ADDR_INVALID) {
-+		req->req.dma = dma_map_single(
-+			&udc->pdev->dev, req->req.buf, req->req.length,
-+			ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-+		req->mapped = 1;
-+	} else {
-+		dma_sync_single_for_device(
-+			&udc->pdev->dev, req->req.dma, req->req.length,
-+			ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-+		req->mapped = 0;
++	pcmcia_unregister_socket(&cf->socket);
++	if (cf->detect_pin >= 0) {
++		free_irq(gpio_to_irq(cf->detect_pin), cf);
++		gpio_free(cf->detect_pin);
 +	}
++	if (cf->vcc_pin >= 0)
++		gpio_free(cf->vcc_pin);
++	if (cf->reset_pin >= 0)
++		gpio_free(cf->reset_pin);
++
++	release_resource(&cf->res_io);
++	release_resource(&cf->res_mem);
++	release_resource(&cf->res_attr);
++	kfree(cf);
++	platform_set_drvdata(pdev, NULL);
 +
-+	req->ctrl = USBA_BF(DMA_BUF_LEN, req->req.length)
-+			| USBA_DMA_CH_EN | USBA_DMA_END_BUF_IE
-+			| USBA_DMA_END_TR_EN | USBA_DMA_END_TR_IE;
-+
-+	if (ep->is_in)
-+		req->ctrl |= USBA_DMA_END_BUF_EN;
-+
-+	/*
-+	 * Add this request to the queue and submit for DMA if
-+	 * possible. Check if we're still alive first -- we may have
-+	 * received a reset since last time we checked.
-+	 */
-+	ret = -ESHUTDOWN;
-+	spin_lock_irqsave(&udc->lock, flags);
-+	if (ep->desc) {
-+		if (list_empty(&ep->queue))
-+			submit_request(ep, req);
-+
-+		list_add_tail(&req->queue, &ep->queue);
-+		ret = 0;
-+	}
-+	spin_unlock_irqrestore(&udc->lock, flags);
-+
-+	return ret;
++	return 0;
 +}
 +
-+static int
-+usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
++static struct platform_driver at32_cf_driver = {
++	.remove		= __exit_p(at32_cf_remove),
++	.driver		= {
++		.name	= "at32_cf",
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init at32_cf_init(void)
 +{
-+	struct usba_request *req = to_usba_req(_req);
-+	struct usba_ep *ep = to_usba_ep(_ep);
-+	struct usba_udc *udc = ep->udc;
-+	unsigned long flags;
 +	int ret;
 +
-+	DBG(DBG_GADGET | DBG_QUEUE | DBG_REQ, "%s: queue req %p, len %u\n",
-+			ep->ep.name, req, _req->length);
-+
-+	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN || !ep->desc)
-+		return -ESHUTDOWN;
-+
-+	req->submitted = 0;
-+	req->using_dma = 0;
-+	req->last_transaction = 0;
-+
-+	_req->status = -EINPROGRESS;
-+	_req->actual = 0;
-+
-+	if (ep->can_dma)
-+		return queue_dma(udc, ep, req, gfp_flags);
-+
-+	/* May have received a reset since last time we checked */
-+	ret = -ESHUTDOWN;
-+	spin_lock_irqsave(&udc->lock, flags);
-+	if (ep->desc) {
-+		list_add_tail(&req->queue, &ep->queue);
-+
-+		if (ep->is_in || (ep_is_control(ep)
-+				&& (ep->state == DATA_STAGE_IN
-+					|| ep->state == STATUS_STAGE_IN)))
-+			usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
-+		else
-+			usba_ep_writel(ep, CTL_ENB, USBA_RX_BK_RDY);
-+		ret = 0;
-+	}
-+	spin_unlock_irqrestore(&udc->lock, flags);
-+
++	ret = platform_driver_probe(&at32_cf_driver, at32_cf_probe);
++	if (ret)
++		printk(KERN_ERR "at32_cf: probe failed: %d\n", ret);
 +	return ret;
 +}
 +
-+static void
-+usba_update_req(struct usba_ep *ep, struct usba_request *req, u32 status)
++static void __exit at32_cf_exit(void)
 +{
-+	req->req.actual = req->req.length - USBA_BFEXT(DMA_BUF_LEN, status);
++	platform_driver_unregister(&at32_cf_driver);
 +}
 +
-+static int stop_dma(struct usba_ep *ep, u32 *pstatus)
-+{
-+	unsigned int timeout;
-+	u32 status;
++module_init(at32_cf_init);
++module_exit(at32_cf_exit);
 +
-+	/*
-+	 * Stop the DMA controller. When writing both CH_EN
-+	 * and LINK to 0, the other bits are not affected.
-+	 */
-+	usba_dma_writel(ep, CONTROL, 0);
-+
-+	/* Wait for the FIFO to empty */
-+	for (timeout = 40; timeout; --timeout) {
-+		status = usba_dma_readl(ep, STATUS);
-+		if (!(status & USBA_DMA_CH_EN))
-+			break;
-+		udelay(1);
-+	}
-+
-+	if (pstatus)
-+		*pstatus = status;
-+
-+	if (timeout == 0) {
-+		dev_err(&ep->udc->pdev->dev,
-+			"%s: timed out waiting for DMA FIFO to empty\n",
-+			ep->ep.name);
-+		return -ETIMEDOUT;
-+	}
-+
-+	return 0;
-+}
-+
-+static int usba_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
-+{
-+	struct usba_ep *ep = to_usba_ep(_ep);
-+	struct usba_udc *udc = ep->udc;
-+	struct usba_request *req = to_usba_req(_req);
-+	unsigned long flags;
-+	u32 status;
-+
-+	DBG(DBG_GADGET | DBG_QUEUE, "ep_dequeue: %s, req %p\n",
-+			ep->ep.name, req);
-+
-+	spin_lock_irqsave(&udc->lock, flags);
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("Driver for SMC PCMCIA interface");
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
+diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
+index d7e1996..67bfbb0 100644
+--- a/drivers/serial/Kconfig
++++ b/drivers/serial/Kconfig
+@@ -380,6 +380,21 @@ config SERIAL_ATMEL_CONSOLE
+ 	  console is the device which receives all kernel messages and
+ 	  warnings and which allows logins in single user mode).
+ 
++config SERIAL_ATMEL_PDC
++	bool "Support DMA transfers on AT91 / AT32 serial port"
++	depends on SERIAL_ATMEL
++	default y
++	help
++	  Say Y here if you wish to use the PDC to do DMA transfers to
++	  and from the Atmel AT91 / AT32 serial port. In order to
++	  actually use DMA transfers, make sure that the use_dma_tx
++	  and use_dma_rx members in the atmel_uart_data struct is set
++	  appropriately for each port.
++
++	  Note that break and error handling currently doesn't work
++	  properly when DMA is enabled. Make sure that ports where
++	  this matters don't use DMA.
++
+ config SERIAL_ATMEL_TTYAT
+ 	bool "Install as device ttyATn instead of ttySn"
+ 	depends on SERIAL_ATMEL=y
+diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
+index 111da57..477950f 100644
+--- a/drivers/serial/atmel_serial.c
++++ b/drivers/serial/atmel_serial.c
+@@ -7,6 +7,8 @@
+  *  Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
+  *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+  *
++ *  DMA support added by Chip Coldwell.
++ *
+  * This program is free software; you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation; either version 2 of the License, or
+@@ -33,6 +35,7 @@
+ #include <linux/sysrq.h>
+ #include <linux/tty_flip.h>
+ #include <linux/platform_device.h>
++#include <linux/dma-mapping.h>
+ #include <linux/atmel_pdc.h>
+ 
+ #include <asm/io.h>
+@@ -47,6 +50,10 @@
+ 
+ #include "atmel_serial.h"
+ 
++#define PDC_BUFFER_SIZE		512
++/* Revisit: We should calculate this based on the actual port settings */
++#define PDC_RX_TIMEOUT		(3 * 10)		/* 3 bytes */
 +
-+	if (req->using_dma) {
-+		/*
-+		 * If this request is currently being transferred,
-+		 * stop the DMA controller and reset the FIFO.
-+		 */
-+		if (ep->queue.next == &req->queue) {
-+			status = usba_dma_readl(ep, STATUS);
-+			if (status & USBA_DMA_CH_EN)
-+				stop_dma(ep, &status);
+ #if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+ #define SUPPORT_SYSRQ
+ #endif
+@@ -74,6 +81,7 @@
+ 
+ #define ATMEL_ISR_PASS_LIMIT	256
+ 
++/* UART registers. CR is write-only, hence no GET macro */
+ #define UART_PUT_CR(port,v)	__raw_writel(v, (port)->membase + ATMEL_US_CR)
+ #define UART_GET_MR(port)	__raw_readl((port)->membase + ATMEL_US_MR)
+ #define UART_PUT_MR(port,v)	__raw_writel(v, (port)->membase + ATMEL_US_MR)
+@@ -87,8 +95,6 @@
+ #define UART_PUT_BRGR(port,v)	__raw_writel(v, (port)->membase + ATMEL_US_BRGR)
+ #define UART_PUT_RTOR(port,v)	__raw_writel(v, (port)->membase + ATMEL_US_RTOR)
+ 
+-// #define UART_GET_CR(port)	__raw_readl((port)->membase + ATMEL_US_CR)		// is write-only
+-
+  /* PDC registers */
+ #define UART_PUT_PTCR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
+ #define UART_GET_PTSR(port)	__raw_readl((port)->membase + ATMEL_PDC_PTSR)
+@@ -101,12 +107,24 @@
+ 
+ #define UART_PUT_TPR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_TPR)
+ #define UART_PUT_TCR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_TCR)
+-//#define UART_PUT_TNPR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_TNPR)
+-//#define UART_PUT_TNCR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_TNCR)
+ 
+ static int (*atmel_open_hook)(struct uart_port *);
+ static void (*atmel_close_hook)(struct uart_port *);
+ 
++struct atmel_dma_buffer {
++	unsigned char	*buf;
++	dma_addr_t	dma_addr;
++	unsigned int	dma_size;
++	unsigned int	ofs;
++};
 +
-+#ifdef CONFIG_USB_GADGET_DEBUG_FS
-+			ep->last_dma_status = status;
-+#endif
++struct atmel_uart_char {
++	u16		status;
++	u16		ch;
++};
 +
-+			usba_writel(udc, EPT_RST, 1 << ep->index);
++#define ATMEL_SERIAL_RINGSIZE 1024
 +
-+			usba_update_req(ep, req, status);
-+		}
-+	}
+ /*
+  * We wrap our port structure around the generic uart_port.
+  */
+@@ -115,6 +133,19 @@ struct atmel_uart_port {
+ 	struct clk		*clk;		/* uart clock */
+ 	unsigned short		suspended;	/* is port suspended? */
+ 	int			break_active;	/* break being received */
 +
-+	/*
-+	 * Errors should stop the queue from advancing until the
-+	 * completion function returns.
-+	 */
-+	list_del_init(&req->queue);
++	short			use_dma_rx;	/* enable PDC receiver */
++	short			pdc_rx_idx;	/* current PDC RX buffer */
++	struct atmel_dma_buffer	pdc_rx[2];	/* PDC receier */
 +
-+	request_complete(ep, req, -ECONNRESET);
++	short			use_dma_tx;	/* enable PDC transmitter */
++	struct atmel_dma_buffer	pdc_tx;		/* PDC transmitter */
 +
-+	/* Process the next request if any */
-+	submit_next_request(ep);
-+	spin_unlock_irqrestore(&udc->lock, flags);
++	struct tasklet_struct	tasklet;
++	unsigned int		irq_status;
++	unsigned int		irq_status_prev;
 +
-+	return 0;
++	struct circ_buf		rx_ring;
+ };
+ 
+ static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
+@@ -123,6 +154,38 @@ static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
+ static struct console atmel_console;
+ #endif
+ 
++static inline struct atmel_uart_port *
++to_atmel_uart_port(struct uart_port *uart)
++{
++	return container_of(uart, struct atmel_uart_port, uart);
 +}
 +
-+static int usba_ep_set_halt(struct usb_ep *_ep, int value)
++#ifdef CONFIG_SERIAL_ATMEL_PDC
++static bool atmel_use_dma_rx(struct uart_port *port)
 +{
-+	struct usba_ep *ep = to_usba_ep(_ep);
-+	struct usba_udc *udc = ep->udc;
-+	unsigned long flags;
-+	int ret = 0;
-+
-+	DBG(DBG_GADGET, "endpoint %s: %s HALT\n", ep->ep.name,
-+			value ? "set" : "clear");
++	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 +
-+	if (!ep->desc) {
-+		DBG(DBG_ERR, "Attempted to halt uninitialized ep %s\n",
-+				ep->ep.name);
-+		return -ENODEV;
-+	}
-+	if (ep->is_isoc) {
-+		DBG(DBG_ERR, "Attempted to halt isochronous ep %s\n",
-+				ep->ep.name);
-+		return -ENOTTY;
-+	}
-+
-+	spin_lock_irqsave(&udc->lock, flags);
-+
-+	/*
-+	 * We can't halt IN endpoints while there are still data to be
-+	 * transferred
-+	 */
-+	if (!list_empty(&ep->queue)
-+			|| ((value && ep->is_in && (usba_ep_readl(ep, STA)
-+					& USBA_BF(BUSY_BANKS, -1L))))) {
-+		ret = -EAGAIN;
-+	} else {
-+		if (value)
-+			usba_ep_writel(ep, SET_STA, USBA_FORCE_STALL);
-+		else
-+			usba_ep_writel(ep, CLR_STA,
-+					USBA_FORCE_STALL | USBA_TOGGLE_CLR);
-+		usba_ep_readl(ep, STA);
-+	}
-+
-+	spin_unlock_irqrestore(&udc->lock, flags);
-+
-+	return ret;
++	return atmel_port->use_dma_rx;
 +}
 +
-+static int usba_ep_fifo_status(struct usb_ep *_ep)
++static bool atmel_use_dma_tx(struct uart_port *port)
 +{
-+	struct usba_ep *ep = to_usba_ep(_ep);
++	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 +
-+	return USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA));
++	return atmel_port->use_dma_tx;
 +}
-+
-+static void usba_ep_fifo_flush(struct usb_ep *_ep)
++#else
++static bool atmel_use_dma_rx(struct uart_port *port)
 +{
-+	struct usba_ep *ep = to_usba_ep(_ep);
-+	struct usba_udc *udc = ep->udc;
-+
-+	usba_writel(udc, EPT_RST, 1 << ep->index);
++	return false;
 +}
 +
-+static const struct usb_ep_ops usba_ep_ops = {
-+	.enable		= usba_ep_enable,
-+	.disable	= usba_ep_disable,
-+	.alloc_request	= usba_ep_alloc_request,
-+	.free_request	= usba_ep_free_request,
-+	.queue		= usba_ep_queue,
-+	.dequeue	= usba_ep_dequeue,
-+	.set_halt	= usba_ep_set_halt,
-+	.fifo_status	= usba_ep_fifo_status,
-+	.fifo_flush	= usba_ep_fifo_flush,
-+};
-+
-+static int usba_udc_get_frame(struct usb_gadget *gadget)
++static bool atmel_use_dma_tx(struct uart_port *port)
 +{
-+	struct usba_udc *udc = to_usba_udc(gadget);
-+
-+	return USBA_BFEXT(FRAME_NUMBER, usba_readl(udc, FNUM));
++	return false;
 +}
++#endif
 +
-+static const struct usb_gadget_ops usba_udc_ops = {
-+	.get_frame	= usba_udc_get_frame,
-+};
-+
-+#define EP(nam, idx, maxpkt, maxbk, dma, isoc)			\
-+{								\
-+	.ep	= {						\
-+		.ops		= &usba_ep_ops,			\
-+		.name		= nam,				\
-+		.maxpacket	= maxpkt,			\
-+	},							\
-+	.udc		= &the_udc,				\
-+	.queue		= LIST_HEAD_INIT(usba_ep[idx].queue),	\
-+	.fifo_size	= maxpkt,				\
-+	.nr_banks	= maxbk,				\
-+	.index		= idx,					\
-+	.can_dma	= dma,					\
-+	.can_isoc	= isoc,					\
-+}
-+
-+static struct usba_ep usba_ep[] = {
-+	EP("ep0", 0, 64, 1, 0, 0),
-+	EP("ep1in-bulk", 1, 512, 2, 1, 1),
-+	EP("ep2out-bulk", 2, 512, 2, 1, 1),
-+	EP("ep3in-int", 3, 64, 3, 1, 0),
-+	EP("ep4out-int", 4, 64, 3, 1, 0),
-+	EP("ep5in-iso", 5, 1024, 3, 1, 1),
-+	EP("ep6out-iso", 6, 1024, 3, 1, 1),
-+};
-+#undef EP
-+
-+static struct usb_endpoint_descriptor usba_ep0_desc = {
-+	.bLength = USB_DT_ENDPOINT_SIZE,
-+	.bDescriptorType = USB_DT_ENDPOINT,
-+	.bEndpointAddress = 0,
-+	.bmAttributes = USB_ENDPOINT_XFER_CONTROL,
-+	.wMaxPacketSize = __constant_cpu_to_le16(64),
-+	/* FIXME: I have no idea what to put here */
-+	.bInterval = 1,
-+};
-+
-+static void nop_release(struct device *dev)
-+{
-+
-+}
-+
-+static struct usba_udc the_udc = {
-+	.gadget	= {
-+		.ops		= &usba_udc_ops,
-+		.ep0		= &usba_ep[0].ep,
-+		.ep_list	= LIST_HEAD_INIT(the_udc.gadget.ep_list),
-+		.is_dualspeed	= 1,
-+		.name		= "atmel_usba_udc",
-+		.dev	= {
-+			.bus_id		= "gadget",
-+			.release	= nop_release,
-+		},
-+	},
-+
-+	.lock	= SPIN_LOCK_UNLOCKED,
-+};
+ /*
+  * Return TIOCSER_TEMT when transmitter FIFO and Shift register is empty.
+  */
+@@ -142,8 +205,8 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
+ #ifdef CONFIG_ARCH_AT91RM9200
+ 	if (cpu_is_at91rm9200()) {
+ 		/*
+-		 * AT91RM9200 Errata #39: RTS0 is not internally connected to PA21.
+-		 *  We need to drive the pin manually.
++		 * AT91RM9200 Errata #39: RTS0 is not internally connected
++		 * to PA21. We need to drive the pin manually.
+ 		 */
+ 		if (port->mapbase == AT91RM9200_BASE_US0) {
+ 			if (mctrl & TIOCM_RTS)
+@@ -204,7 +267,12 @@ static u_int atmel_get_mctrl(struct uart_port *port)
+  */
+ static void atmel_stop_tx(struct uart_port *port)
+ {
+-	UART_PUT_IDR(port, ATMEL_US_TXRDY);
++	if (atmel_use_dma_tx(port)) {
++		/* disable PDC transmit */
++		UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
++		UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
++	} else
++		UART_PUT_IDR(port, ATMEL_US_TXRDY);
+ }
+ 
+ /*
+@@ -212,7 +280,17 @@ static void atmel_stop_tx(struct uart_port *port)
+  */
+ static void atmel_start_tx(struct uart_port *port)
+ {
+-	UART_PUT_IER(port, ATMEL_US_TXRDY);
++	if (atmel_use_dma_tx(port)) {
++		if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN)
++			/* The transmitter is already running.  Yes, we
++			   really need this.*/
++			return;
 +
-+/*
-+ * Called with interrupts disabled and udc->lock held.
++		UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
++		/* re-enable PDC transmit */
++		UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
++	} else
++		UART_PUT_IER(port, ATMEL_US_TXRDY);
+ }
+ 
+ /*
+@@ -220,7 +298,12 @@ static void atmel_start_tx(struct uart_port *port)
+  */
+ static void atmel_stop_rx(struct uart_port *port)
+ {
+-	UART_PUT_IDR(port, ATMEL_US_RXRDY);
++	if (atmel_use_dma_rx(port)) {
++		/* disable PDC receive */
++		UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS);
++		UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
++	} else
++		UART_PUT_IDR(port, ATMEL_US_RXRDY);
+ }
+ 
+ /*
+@@ -228,7 +311,8 @@ static void atmel_stop_rx(struct uart_port *port)
+  */
+ static void atmel_enable_ms(struct uart_port *port)
+ {
+-	UART_PUT_IER(port, ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC);
++	UART_PUT_IER(port, ATMEL_US_RIIC | ATMEL_US_DSRIC
++			| ATMEL_US_DCDIC | ATMEL_US_CTSIC);
+ }
+ 
+ /*
+@@ -243,22 +327,63 @@ static void atmel_break_ctl(struct uart_port *port, int break_state)
+ }
+ 
+ /*
++ * Stores the incoming character in the ring buffer
 + */
-+static void reset_all_endpoints(struct usba_udc *udc)
-+{
-+	struct usba_ep *ep;
-+	struct usba_request *req, *tmp_req;
-+
-+	usba_writel(udc, EPT_RST, ~0UL);
-+
-+	ep = to_usba_ep(udc->gadget.ep0);
-+	list_for_each_entry_safe(req, tmp_req, &ep->queue, queue) {
-+		list_del_init(&req->queue);
-+		request_complete(ep, req, -ECONNRESET);
-+	}
-+
-+	list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
-+		if (ep->desc)
-+			usba_ep_disable(&ep->ep);
-+	}
-+}
-+
-+static struct usba_ep *get_ep_by_addr(struct usba_udc *udc, u16 wIndex)
++static void
++atmel_buffer_rx_char(struct uart_port *port, unsigned int status,
++		     unsigned int ch)
 +{
-+	struct usba_ep *ep;
++	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
++	struct circ_buf *ring = &atmel_port->rx_ring;
++	struct atmel_uart_char *c;
 +
-+	if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
-+		return to_usba_ep(udc->gadget.ep0);
++	if (!CIRC_SPACE(ring->head, ring->tail, ATMEL_SERIAL_RINGSIZE))
++		/* Buffer overflow, ignore char */
++		return;
 +
-+	list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) {
-+		u8 bEndpointAddress;
++	c = &((struct atmel_uart_char *)ring->buf)[ring->head];
++	c->status	= status;
++	c->ch		= ch;
 +
-+		if (!ep->desc)
-+			continue;
-+		bEndpointAddress = ep->desc->bEndpointAddress;
-+		if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
-+			continue;
-+		if ((bEndpointAddress & USB_ENDPOINT_NUMBER_MASK)
-+				== (wIndex & USB_ENDPOINT_NUMBER_MASK))
-+			return ep;
-+	}
++	/* Make sure the character is stored before we update head. */
++	smp_wmb();
 +
-+	return NULL;
++	ring->head = (ring->head + 1) & (ATMEL_SERIAL_RINGSIZE - 1);
 +}
 +
-+/* Called with interrupts disabled and udc->lock held */
-+static inline void set_protocol_stall(struct usba_udc *udc, struct usba_ep *ep)
++/*
++ * Deal with parity, framing and overrun errors.
++ */
++static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status)
 +{
-+	usba_ep_writel(ep, SET_STA, USBA_FORCE_STALL);
-+	ep->state = WAIT_FOR_SETUP;
-+}
++	/* clear error */
++	UART_PUT_CR(port, ATMEL_US_RSTSTA);
 +
-+static inline int is_stalled(struct usba_udc *udc, struct usba_ep *ep)
-+{
-+	if (usba_ep_readl(ep, STA) & USBA_FORCE_STALL)
-+		return 1;
-+	return 0;
++	if (status & ATMEL_US_RXBRK) {
++		/* ignore side-effect */
++		status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);
++		port->icount.brk++;
++	}
++	if (status & ATMEL_US_PARE)
++		port->icount.parity++;
++	if (status & ATMEL_US_FRAME)
++		port->icount.frame++;
++	if (status & ATMEL_US_OVRE)
++		port->icount.overrun++;
 +}
 +
-+static inline void set_address(struct usba_udc *udc, unsigned int addr)
-+{
-+	u32 regval;
-+
-+	DBG(DBG_BUS, "setting address %u...\n", addr);
-+	regval = usba_readl(udc, CTRL);
-+	regval = USBA_BFINS(DEV_ADDR, addr, regval);
-+	usba_writel(udc, CTRL, regval);
++/*
+  * Characters received (called from interrupt handler)
+  */
+ static void atmel_rx_chars(struct uart_port *port)
+ {
+-	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+-	struct tty_struct *tty = port->info->tty;
+-	unsigned int status, ch, flg;
++	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
++	unsigned int status, ch;
+ 
+ 	status = UART_GET_CSR(port);
+ 	while (status & ATMEL_US_RXRDY) {
+ 		ch = UART_GET_CHAR(port);
+ 
+-		port->icount.rx++;
+-
+-		flg = TTY_NORMAL;
+-
+ 		/*
+ 		 * note that the error handling code is
+ 		 * out of the main execution path
+@@ -266,15 +391,14 @@ static void atmel_rx_chars(struct uart_port *port)
+ 		if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
+ 				       | ATMEL_US_OVRE | ATMEL_US_RXBRK)
+ 			     || atmel_port->break_active)) {
+-			UART_PUT_CR(port, ATMEL_US_RSTSTA);	/* clear error */
++
++			/* clear error */
++			UART_PUT_CR(port, ATMEL_US_RSTSTA);
++
+ 			if (status & ATMEL_US_RXBRK
+ 			    && !atmel_port->break_active) {
+-				status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);	/* ignore side-effect */
+-				port->icount.brk++;
+ 				atmel_port->break_active = 1;
+ 				UART_PUT_IER(port, ATMEL_US_RXBRK);
+-				if (uart_handle_break(port))
+-					goto ignore_char;
+ 			} else {
+ 				/*
+ 				 * This is either the end-of-break
+@@ -287,52 +411,30 @@ static void atmel_rx_chars(struct uart_port *port)
+ 				status &= ~ATMEL_US_RXBRK;
+ 				atmel_port->break_active = 0;
+ 			}
+-			if (status & ATMEL_US_PARE)
+-				port->icount.parity++;
+-			if (status & ATMEL_US_FRAME)
+-				port->icount.frame++;
+-			if (status & ATMEL_US_OVRE)
+-				port->icount.overrun++;
+-
+-			status &= port->read_status_mask;
+-
+-			if (status & ATMEL_US_RXBRK)
+-				flg = TTY_BREAK;
+-			else if (status & ATMEL_US_PARE)
+-				flg = TTY_PARITY;
+-			else if (status & ATMEL_US_FRAME)
+-				flg = TTY_FRAME;
+ 		}
+ 
+-		if (uart_handle_sysrq_char(port, ch))
+-			goto ignore_char;
+-
+-		uart_insert_char(port, status, ATMEL_US_OVRE, ch, flg);
+-
+-	ignore_char:
++		atmel_buffer_rx_char(port, status, ch);
+ 		status = UART_GET_CSR(port);
+ 	}
+ 
+-	tty_flip_buffer_push(tty);
++	tasklet_schedule(&atmel_port->tasklet);
+ }
+ 
+ /*
+- * Transmit characters (called from interrupt handler)
++ * Transmit characters (called from tasklet with TXRDY interrupt
++ * disabled)
+  */
+ static void atmel_tx_chars(struct uart_port *port)
+ {
+ 	struct circ_buf *xmit = &port->info->xmit;
+ 
+-	if (port->x_char) {
++	if (port->x_char && UART_GET_CSR(port) & ATMEL_US_TXRDY) {
+ 		UART_PUT_CHAR(port, port->x_char);
+ 		port->icount.tx++;
+ 		port->x_char = 0;
+-		return;
+ 	}
+-	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+-		atmel_stop_tx(port);
++	if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+ 		return;
+-	}
+ 
+ 	while (UART_GET_CSR(port) & ATMEL_US_TXRDY) {
+ 		UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
+@@ -345,8 +447,88 @@ static void atmel_tx_chars(struct uart_port *port)
+ 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ 		uart_write_wakeup(port);
+ 
+-	if (uart_circ_empty(xmit))
+-		atmel_stop_tx(port);
++	if (!uart_circ_empty(xmit))
++		UART_PUT_IER(port, ATMEL_US_TXRDY);
 +}
 +
-+static int do_test_mode(struct usba_udc *udc)
++/*
++ * receive interrupt handler.
++ */
++static void
++atmel_handle_receive(struct uart_port *port, unsigned int pending)
 +{
-+	static const char test_packet_buffer[] = {
-+		/* JKJKJKJK * 9 */
-+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		/* JJKKJJKK * 8 */
-+		0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA,
-+		/* JJKKJJKK * 8 */
-+		0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE,
-+		/* JJJJJJJKKKKKKK * 8 */
-+		0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-+		0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-+		/* JJJJJJJK * 8 */
-+		0x7F, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD,
-+		/* {JKKKKKKK * 10}, JK */
-+		0xFC, 0x7E, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, 0x7E
-+	};
-+	struct usba_ep *ep;
-+	struct device *dev = &udc->pdev->dev;
-+	int test_mode;
-+
-+	test_mode = udc->test_mode;
-+
-+	/* Start from a clean slate */
-+	reset_all_endpoints(udc);
++	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 +
-+	switch (test_mode) {
-+	case 0x0100:
-+		/* Test_J */
-+		usba_writel(udc, TST, USBA_TST_J_MODE);
-+		dev_info(dev, "Entering Test_J mode...\n");
-+		break;
-+	case 0x0200:
-+		/* Test_K */
-+		usba_writel(udc, TST, USBA_TST_K_MODE);
-+		dev_info(dev, "Entering Test_K mode...\n");
-+		break;
-+	case 0x0300:
++	if (atmel_use_dma_rx(port)) {
 +		/*
-+		 * Test_SE0_NAK: Force high-speed mode and set up ep0
-+		 * for Bulk IN transfers
++		 * PDC receive. Just schedule the tasklet and let it
++		 * figure out the details.
++		 *
++		 * TODO: We're not handling error flags correctly at
++		 * the moment.
 +		 */
-+		ep = &usba_ep[0];
-+		usba_writel(udc, TST,
-+				USBA_BF(SPEED_CFG, USBA_SPEED_CFG_FORCE_HIGH));
-+		usba_ep_writel(ep, CFG,
-+				USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
-+				| USBA_EPT_DIR_IN
-+				| USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK)
-+				| USBA_BF(BK_NUMBER, 1));
-+		if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) {
-+			set_protocol_stall(udc, ep);
-+			dev_err(dev, "Test_SE0_NAK: ep0 not mapped\n");
-+		} else {
-+			usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
-+			dev_info(dev, "Entering Test_SE0_NAK mode...\n");
-+		}
-+		break;
-+	case 0x0400:
-+		/* Test_Packet */
-+		ep = &usba_ep[0];
-+		usba_ep_writel(ep, CFG,
-+				USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
-+				| USBA_EPT_DIR_IN
-+				| USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK)
-+				| USBA_BF(BK_NUMBER, 1));
-+		if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) {
-+			set_protocol_stall(udc, ep);
-+			dev_err(dev, "Test_Packet: ep0 not mapped\n");
-+		} else {
-+			usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
-+			usba_writel(udc, TST, USBA_TST_PKT_MODE);
-+			copy_to_fifo(ep->fifo, test_packet_buffer,
-+					sizeof(test_packet_buffer));
-+			usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
-+			dev_info(dev, "Entering Test_Packet mode...\n");
++		if (pending & (ATMEL_US_ENDRX | ATMEL_US_TIMEOUT)) {
++			UART_PUT_IDR(port, (ATMEL_US_ENDRX
++						| ATMEL_US_TIMEOUT));
++			tasklet_schedule(&atmel_port->tasklet);
 +		}
-+		break;
-+	default:
-+		dev_err(dev, "Invalid test mode: 0x%04x\n", test_mode);
-+		return -EINVAL;
-+	}
 +
-+	return 0;
-+}
++		if (pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE |
++				ATMEL_US_FRAME | ATMEL_US_PARE))
++			atmel_pdc_rxerr(port, pending);
++	}
 +
-+/* Avoid overly long expressions */
-+static inline bool feature_is_dev_remote_wakeup(struct usb_ctrlrequest *crq)
-+{
-+	if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_REMOTE_WAKEUP))
-+		return true;
-+	return false;
++	/* Interrupt receive */
++	if (pending & ATMEL_US_RXRDY)
++		atmel_rx_chars(port);
++	else if (pending & ATMEL_US_RXBRK) {
++		/*
++		 * End of break detected. If it came along with a
++		 * character, atmel_rx_chars will handle it.
++		 */
++		UART_PUT_CR(port, ATMEL_US_RSTSTA);
++		UART_PUT_IDR(port, ATMEL_US_RXBRK);
++		atmel_port->break_active = 0;
++	}
 +}
 +
-+static inline bool feature_is_dev_test_mode(struct usb_ctrlrequest *crq)
++/*
++ * transmit interrupt handler. (Transmit is IRQF_NODELAY safe)
++ */
++static void
++atmel_handle_transmit(struct uart_port *port, unsigned int pending)
 +{
-+	if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_TEST_MODE))
-+		return true;
-+	return false;
-+}
++	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 +
-+static inline bool feature_is_ep_halt(struct usb_ctrlrequest *crq)
-+{
-+	if (crq->wValue == __constant_cpu_to_le16(USB_ENDPOINT_HALT))
-+		return true;
-+	return false;
++	if (atmel_use_dma_tx(port)) {
++		/* PDC transmit */
++		if (pending & (ATMEL_US_ENDTX | ATMEL_US_TXBUFE)) {
++			UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
++			tasklet_schedule(&atmel_port->tasklet);
++		}
++	} else {
++		/* Interrupt transmit */
++		if (pending & ATMEL_US_TXRDY) {
++			UART_PUT_IDR(port, ATMEL_US_TXRDY);
++			tasklet_schedule(&atmel_port->tasklet);
++		}
++	}
 +}
 +
-+static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep,
-+		struct usb_ctrlrequest *crq)
++/*
++ * status flags interrupt handler.
++ */
++static void
++atmel_handle_status(struct uart_port *port, unsigned int pending,
++		    unsigned int status)
 +{
-+	int retval = 0;;
-+
-+	switch (crq->bRequest) {
-+	case USB_REQ_GET_STATUS: {
-+		u16 status;
-+
-+		if (crq->bRequestType == (USB_DIR_IN | USB_RECIP_DEVICE)) {
-+			/* Self-powered, no remote wakeup */
-+			status = __constant_cpu_to_le16(1 << 0);
-+		} else if (crq->bRequestType
-+				== (USB_DIR_IN | USB_RECIP_INTERFACE)) {
-+			status = __constant_cpu_to_le16(0);
-+		} else if (crq->bRequestType
-+				== (USB_DIR_IN | USB_RECIP_ENDPOINT)) {
-+			struct usba_ep *target;
++	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 +
-+			target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
-+			if (!target)
-+				goto stall;
-+
-+			status = 0;
-+			if (is_stalled(udc, target))
-+				status |= __constant_cpu_to_le16(1);
-+		} else
-+			goto delegate;
-+
-+		/* Write directly to the FIFO. No queueing is done. */
-+		if (crq->wLength != __constant_cpu_to_le16(sizeof(status)))
-+			goto stall;
-+		ep->state = DATA_STAGE_IN;
-+		__raw_writew(status, ep->fifo);
-+		usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
-+		break;
++	if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC
++				| ATMEL_US_CTSIC)) {
++		atmel_port->irq_status = status;
++		tasklet_schedule(&atmel_port->tasklet);
 +	}
+ }
+ 
+ /*
+@@ -355,47 +537,255 @@ static void atmel_tx_chars(struct uart_port *port)
+ static irqreturn_t atmel_interrupt(int irq, void *dev_id)
+ {
+ 	struct uart_port *port = dev_id;
+-	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+ 	unsigned int status, pending, pass_counter = 0;
+ 
+-	status = UART_GET_CSR(port);
+-	pending = status & UART_GET_IMR(port);
+-	while (pending) {
+-		/* Interrupt receive */
+-		if (pending & ATMEL_US_RXRDY)
+-			atmel_rx_chars(port);
+-		else if (pending & ATMEL_US_RXBRK) {
++	do {
++		status = UART_GET_CSR(port);
++		pending = status & UART_GET_IMR(port);
++		if (!pending)
++			break;
 +
-+	case USB_REQ_CLEAR_FEATURE: {
-+		if (crq->bRequestType == USB_RECIP_DEVICE) {
-+			if (feature_is_dev_remote_wakeup(crq)) {
-+				/* TODO: Handle REMOTE_WAKEUP */
-+			} else {
-+				/* Can't CLEAR_FEATURE TEST_MODE */
-+				goto stall;
-+			}
-+		} else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
-+			struct usba_ep *target;
-+
-+			if (crq->wLength != __constant_cpu_to_le16(0)
-+					|| !feature_is_ep_halt(crq))
-+				goto stall;
-+			target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
-+			if (!target)
-+				goto stall;
-+
-+			usba_ep_writel(target, CLR_STA, USBA_FORCE_STALL);
-+			if (target->index != 0)
-+				usba_ep_writel(target, CLR_STA,
-+						USBA_TOGGLE_CLR);
-+		} else {
-+			goto delegate;
-+		}
++		atmel_handle_receive(port, pending);
++		atmel_handle_status(port, pending, status);
++		atmel_handle_transmit(port, pending);
++	} while (pass_counter++ < ATMEL_ISR_PASS_LIMIT);
 +
-+		send_status(udc, ep);
-+		break;
-+	}
++	return IRQ_HANDLED;
++}
 +
-+	case USB_REQ_SET_FEATURE: {
-+		if (crq->bRequestType == USB_RECIP_DEVICE) {
-+			if (feature_is_dev_test_mode(crq)) {
-+				send_status(udc, ep);
-+				ep->state = STATUS_STAGE_TEST;
-+				udc->test_mode = le16_to_cpu(crq->wIndex);
-+				return 0;
-+			} else if (feature_is_dev_remote_wakeup(crq)) {
-+				/* TODO: Handle REMOTE_WAKEUP */
-+			} else {
-+				goto stall;
-+			}
-+		} else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
-+			struct usba_ep *target;
++/*
++ * Called from tasklet with ENDTX and TXBUFE interrupts disabled.
++ */
++static void atmel_tx_dma(struct uart_port *port)
++{
++	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
++	struct circ_buf *xmit = &port->info->xmit;
++	struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
++	int count;
 +
-+			if (crq->wLength != __constant_cpu_to_le16(0)
-+					|| !feature_is_ep_halt(crq))
-+				goto stall;
++	xmit->tail += pdc->ofs;
++	xmit->tail &= UART_XMIT_SIZE - 1;
 +
-+			target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
-+			if (!target)
-+				goto stall;
++	port->icount.tx += pdc->ofs;
++	pdc->ofs = 0;
 +
-+			usba_ep_writel(target, SET_STA, USBA_FORCE_STALL);
-+		} else
-+			goto delegate;
++	if (!uart_circ_empty(xmit)) {
++		/* more to transmit - setup next transfer */
 +
-+		send_status(udc, ep);
-+		break;
-+	}
++		/* disable PDC transmit */
++		UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
++		dma_sync_single_for_device(port->dev,
++					   pdc->dma_addr,
++					   pdc->dma_size,
++					   DMA_TO_DEVICE);
 +
-+	case USB_REQ_SET_ADDRESS:
-+		if (crq->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE))
-+			goto delegate;
++		count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
++		pdc->ofs = count;
 +
-+		set_address(udc, le16_to_cpu(crq->wValue));
-+		send_status(udc, ep);
-+		ep->state = STATUS_STAGE_ADDR;
-+		break;
++		UART_PUT_TPR(port, pdc->dma_addr + xmit->tail);
++		UART_PUT_TCR(port, count);
++		/* re-enable PDC transmit and interrupts */
++		UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
++		UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
++	} else {
++		/* nothing left to transmit - disable the transmitter */
 +
-+	default:
-+delegate:
-+		spin_unlock(&udc->lock);
-+		retval = udc->driver->setup(&udc->gadget, crq);
-+		spin_lock(&udc->lock);
++		/* disable PDC transmit */
++		UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
 +	}
 +
-+	return retval;
-+
-+stall:
-+	printk(KERN_ERR
-+		"udc: %s: Invalid setup request: %02x.%02x v%04x i%04x l%d, "
-+		"halting endpoint...\n",
-+		ep->ep.name, crq->bRequestType, crq->bRequest,
-+		le16_to_cpu(crq->wValue), le16_to_cpu(crq->wIndex),
-+		le16_to_cpu(crq->wLength));
-+	set_protocol_stall(udc, ep);
-+	return -1;
++	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
++		uart_write_wakeup(port);
 +}
 +
-+static void usba_control_irq(struct usba_udc *udc, struct usba_ep *ep)
++static void atmel_rx_from_ring(struct uart_port *port)
 +{
-+	struct usba_request *req;
-+	u32 epstatus;
-+	u32 epctrl;
-+
-+restart:
-+	epstatus = usba_ep_readl(ep, STA);
-+	epctrl = usba_ep_readl(ep, CTL);
-+
-+	DBG(DBG_INT, "%s [%d]: s/%08x c/%08x\n",
-+			ep->ep.name, ep->state, epstatus, epctrl);
-+
-+	req = NULL;
-+	if (!list_empty(&ep->queue))
-+		req = list_entry(ep->queue.next,
-+				 struct usba_request, queue);
-+
-+	if ((epctrl & USBA_TX_PK_RDY) && !(epstatus & USBA_TX_PK_RDY)) {
-+		if (req->submitted)
-+			next_fifo_transaction(ep, req);
-+		else
-+			submit_request(ep, req);
-+
-+		if (req->last_transaction) {
-+			usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
-+			usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
-+		}
-+		goto restart;
-+	}
-+	if ((epstatus & epctrl) & USBA_TX_COMPLETE) {
-+		usba_ep_writel(ep, CLR_STA, USBA_TX_COMPLETE);
-+
-+		switch (ep->state) {
-+		case DATA_STAGE_IN:
-+			usba_ep_writel(ep, CTL_ENB, USBA_RX_BK_RDY);
-+			usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
-+			ep->state = STATUS_STAGE_OUT;
-+			break;
-+		case STATUS_STAGE_ADDR:
-+			/* Activate our new address */
-+			usba_writel(udc, CTRL, (usba_readl(udc, CTRL)
-+						| USBA_FADDR_EN));
-+			usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
-+			ep->state = WAIT_FOR_SETUP;
-+			break;
-+		case STATUS_STAGE_IN:
-+			if (req) {
-+				list_del_init(&req->queue);
-+				request_complete(ep, req, 0);
-+				submit_next_request(ep);
-+			}
-+			usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
-+			ep->state = WAIT_FOR_SETUP;
-+			break;
-+		case STATUS_STAGE_TEST:
-+			usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
-+			ep->state = WAIT_FOR_SETUP;
-+			if (do_test_mode(udc))
-+				set_protocol_stall(udc, ep);
-+			break;
-+		default:
-+			printk(KERN_ERR
-+				"udc: %s: TXCOMP: Invalid endpoint state %d, "
-+				"halting endpoint...\n",
-+				ep->ep.name, ep->state);
-+			set_protocol_stall(udc, ep);
-+			break;
-+		}
-+
-+		goto restart;
-+	}
-+	if ((epstatus & epctrl) & USBA_RX_BK_RDY) {
-+		switch (ep->state) {
-+		case STATUS_STAGE_OUT:
-+			usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
-+			usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
++	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
++	struct circ_buf *ring = &atmel_port->rx_ring;
++	unsigned int flg;
++	unsigned int status;
 +
-+			if (req) {
-+				list_del_init(&req->queue);
-+				request_complete(ep, req, 0);
-+			}
-+			ep->state = WAIT_FOR_SETUP;
-+			break;
++	while (ring->head != ring->tail) {
++		struct atmel_uart_char c;
 +
-+		case DATA_STAGE_OUT:
-+			receive_data(ep);
-+			break;
++		/* Make sure c is loaded after head. */
++		smp_rmb();
 +
-+		default:
-+			usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
-+			usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
-+			printk(KERN_ERR
-+				"udc: %s: RXRDY: Invalid endpoint state %d, "
-+				"halting endpoint...\n",
-+				ep->ep.name, ep->state);
-+			set_protocol_stall(udc, ep);
-+			break;
-+		}
++		c = ((struct atmel_uart_char *)ring->buf)[ring->tail];
 +
-+		goto restart;
-+	}
-+	if (epstatus & USBA_RX_SETUP) {
-+		union {
-+			struct usb_ctrlrequest crq;
-+			unsigned long data[2];
-+		} crq;
-+		unsigned int pkt_len;
-+		int ret;
++		ring->tail = (ring->tail + 1) & (ATMEL_SERIAL_RINGSIZE - 1);
 +
-+		if (ep->state != WAIT_FOR_SETUP) {
-+			/*
-+			 * Didn't expect a SETUP packet at this
-+			 * point. Clean up any pending requests (which
-+			 * may be successful).
-+			 */
-+			int status = -EPROTO;
++		port->icount.rx++;
++		status = c.status;
++		flg = TTY_NORMAL;
 +
-+			/*
-+			 * RXRDY and TXCOMP are dropped when SETUP
-+			 * packets arrive.  Just pretend we received
-+			 * the status packet.
-+			 */
-+			if (ep->state == STATUS_STAGE_OUT
-+					|| ep->state == STATUS_STAGE_IN) {
-+				usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
-+				status = 0;
-+			}
-+
-+			if (req) {
-+				list_del_init(&req->queue);
-+				request_complete(ep, req, status);
++		/*
++		 * note that the error handling code is
++		 * out of the main execution path
++		 */
++		if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
++				       | ATMEL_US_OVRE | ATMEL_US_RXBRK))) {
++			if (status & ATMEL_US_RXBRK) {
++				/* ignore side-effect */
++				status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);
++
++				port->icount.brk++;
++				if (uart_handle_break(port))
++					continue;
 +			}
++			if (status & ATMEL_US_PARE)
++				port->icount.parity++;
++			if (status & ATMEL_US_FRAME)
++				port->icount.frame++;
++			if (status & ATMEL_US_OVRE)
++				port->icount.overrun++;
++
++			status &= port->read_status_mask;
++
++			if (status & ATMEL_US_RXBRK)
++				flg = TTY_BREAK;
++			else if (status & ATMEL_US_PARE)
++				flg = TTY_PARITY;
++			else if (status & ATMEL_US_FRAME)
++				flg = TTY_FRAME;
 +		}
 +
-+		pkt_len = USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA));
-+		DBG(DBG_HW, "Packet length: %u\n", pkt_len);
-+		if (pkt_len != sizeof(crq)) {
-+			printk(KERN_WARNING "udc: Invalid packet length %u "
-+				"(expected %lu)\n", pkt_len, sizeof(crq));
-+			set_protocol_stall(udc, ep);
-+			return;
-+		}
-+
-+		DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo);
-+		copy_from_fifo(crq.data, ep->fifo, sizeof(crq));
-+
-+		/* Free up one bank in the FIFO so that we can
-+		 * generate or receive a reply right away. */
-+		usba_ep_writel(ep, CLR_STA, USBA_RX_SETUP);
 +
-+		/* printk(KERN_DEBUG "setup: %d: %02x.%02x\n",
-+			ep->state, crq.crq.bRequestType,
-+			crq.crq.bRequest); */
-+
-+		if (crq.crq.bRequestType & USB_DIR_IN) {
-+			/*
-+			 * The USB 2.0 spec states that "if wLength is
-+			 * zero, there is no data transfer phase."
-+			 * However, testusb #14 seems to actually
-+			 * expect a data phase even if wLength = 0...
-+			 */
-+			ep->state = DATA_STAGE_IN;
-+		} else {
-+			if (crq.crq.wLength != __constant_cpu_to_le16(0))
-+				ep->state = DATA_STAGE_OUT;
-+			else
-+				ep->state = STATUS_STAGE_IN;
-+		}
-+
-+		ret = -1;
-+		if (ep->index == 0)
-+			ret = handle_ep0_setup(udc, ep, &crq.crq);
-+		else {
-+			spin_unlock(&udc->lock);
-+			ret = udc->driver->setup(&udc->gadget, &crq.crq);
-+			spin_lock(&udc->lock);
-+		}
-+
-+		DBG(DBG_BUS, "req %02x.%02x, length %d, state %d, ret %d\n",
-+			crq.crq.bRequestType, crq.crq.bRequest,
-+			le16_to_cpu(crq.crq.wLength), ep->state, ret);
++		if (uart_handle_sysrq_char(port, c.ch))
++			continue;
 +
-+		if (ret < 0) {
-+			/* Let the host know that we failed */
-+			set_protocol_stall(udc, ep);
-+		}
++		uart_insert_char(port, status, ATMEL_US_OVRE, c.ch, flg);
 +	}
-+}
-+
-+static void usba_ep_irq(struct usba_udc *udc, struct usba_ep *ep)
-+{
-+	struct usba_request *req;
-+	u32 epstatus;
-+	u32 epctrl;
-+
-+	epstatus = usba_ep_readl(ep, STA);
-+	epctrl = usba_ep_readl(ep, CTL);
-+
-+	DBG(DBG_INT, "%s: interrupt, status: 0x%08x\n", ep->ep.name, epstatus);
-+
-+	while ((epctrl & USBA_TX_PK_RDY) && !(epstatus & USBA_TX_PK_RDY)) {
-+		DBG(DBG_BUS, "%s: TX PK ready\n", ep->ep.name);
-+
-+		if (list_empty(&ep->queue)) {
-+			dev_warn(&udc->pdev->dev, "ep_irq: queue empty\n");
-+			usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
-+			return;
-+		}
-+
-+		req = list_entry(ep->queue.next, struct usba_request, queue);
-+
-+		if (req->using_dma) {
-+			/* Send a zero-length packet */
-+			usba_ep_writel(ep, SET_STA,
-+					USBA_TX_PK_RDY);
-+			usba_ep_writel(ep, CTL_DIS,
-+					USBA_TX_PK_RDY);
-+			list_del_init(&req->queue);
-+			submit_next_request(ep);
-+			request_complete(ep, req, 0);
-+		} else {
-+			if (req->submitted)
-+				next_fifo_transaction(ep, req);
-+			else
-+				submit_request(ep, req);
-+
-+			if (req->last_transaction) {
-+				list_del_init(&req->queue);
-+				submit_next_request(ep);
-+				request_complete(ep, req, 0);
-+			}
-+		}
 +
-+		epstatus = usba_ep_readl(ep, STA);
-+		epctrl = usba_ep_readl(ep, CTL);
-+	}
-+	if ((epstatus & epctrl) & USBA_RX_BK_RDY) {
-+		DBG(DBG_BUS, "%s: RX data ready\n", ep->ep.name);
-+		receive_data(ep);
-+		usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
-+	}
++	/*
++	 * Drop the lock here since it might end up calling
++	 * uart_start(), which takes the lock.
++	 */
++	spin_unlock(&port->lock);
++	tty_flip_buffer_push(port->info->tty);
++	spin_lock(&port->lock);
 +}
 +
-+static void usba_dma_irq(struct usba_udc *udc, struct usba_ep *ep)
++static void atmel_rx_from_dma(struct uart_port *port)
 +{
-+	struct usba_request *req;
-+	u32 status, control, pending;
-+
-+	status = usba_dma_readl(ep, STATUS);
-+	control = usba_dma_readl(ep, CONTROL);
-+#ifdef CONFIG_USB_GADGET_DEBUG_FS
-+	ep->last_dma_status = status;
-+#endif
-+	pending = status & control;
-+	DBG(DBG_INT | DBG_DMA, "dma irq, s/%#08x, c/%#08x\n", status, control);
-+
-+	if (status & USBA_DMA_CH_EN) {
-+		dev_err(&udc->pdev->dev,
-+			"DMA_CH_EN is set after transfer is finished!\n");
-+		dev_err(&udc->pdev->dev,
-+			"status=%#08x, pending=%#08x, control=%#08x\n",
-+			status, pending, control);
++	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
++	struct tty_struct *tty = port->info->tty;
++	struct atmel_dma_buffer *pdc;
++	int rx_idx = atmel_port->pdc_rx_idx;
++	unsigned int head;
++	unsigned int tail;
++	unsigned int count;
 +
++	do {
++		/* Reset the UART timeout early so that we don't miss one */
++		UART_PUT_CR(port, ATMEL_US_STTTO);
++
++		pdc = &atmel_port->pdc_rx[rx_idx];
++		head = UART_GET_RPR(port) - pdc->dma_addr;
++		tail = pdc->ofs;
++
++		/* If the PDC has switched buffers, RPR won't contain
++		 * any address within the current buffer. Since head
++		 * is unsigned, we just need a one-way comparison to
++		 * find out.
++		 *
++		 * In this case, we just need to consume the entire
++		 * buffer and resubmit it for DMA. This will clear the
++		 * ENDRX bit as well, so that we can safely re-enable
++		 * all interrupts below.
++		 */
++		head = min(head, pdc->dma_size);
++
++		if (likely(head != tail)) {
++			dma_sync_single_for_cpu(port->dev, pdc->dma_addr,
++					pdc->dma_size, DMA_FROM_DEVICE);
++
+ 			/*
+-			 * End of break detected. If it came along
+-			 * with a character, atmel_rx_chars will
+-			 * handle it.
++			 * head will only wrap around when we recycle
++			 * the DMA buffer, and when that happens, we
++			 * explicitly set tail to 0. So head will
++			 * always be greater than tail.
+ 			 */
+-			UART_PUT_CR(port, ATMEL_US_RSTSTA);
+-			UART_PUT_IDR(port, ATMEL_US_RXBRK);
+-			atmel_port->break_active = 0;
++			count = head - tail;
++
++			tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
++
++			dma_sync_single_for_device(port->dev, pdc->dma_addr,
++					pdc->dma_size, DMA_FROM_DEVICE);
++
++			port->icount.rx += count;
++			pdc->ofs = head;
+ 		}
+ 
+-		// TODO: All reads to CSR will clear these interrupts!
+-		if (pending & ATMEL_US_RIIC) port->icount.rng++;
+-		if (pending & ATMEL_US_DSRIC) port->icount.dsr++;
+-		if (pending & ATMEL_US_DCDIC)
 +		/*
-+		 * try to pretend nothing happened. We might have to
-+		 * do something here...
++		 * If the current buffer is full, we need to check if
++		 * the next one contains any additional data.
 +		 */
-+	}
++		if (head >= pdc->dma_size) {
++			pdc->ofs = 0;
++			UART_PUT_RNPR(port, pdc->dma_addr);
++			UART_PUT_RNCR(port, pdc->dma_size);
 +
-+	if (list_empty(&ep->queue))
-+		/* Might happen if a reset comes along at the right moment */
-+		return;
++			rx_idx = !rx_idx;
++			atmel_port->pdc_rx_idx = rx_idx;
++		}
++	} while (head >= pdc->dma_size);
 +
-+	if (pending & (USBA_DMA_END_TR_ST | USBA_DMA_END_BUF_ST)) {
-+		req = list_entry(ep->queue.next, struct usba_request, queue);
-+		usba_update_req(ep, req, status);
++	/*
++	 * Drop the lock here since it might end up calling
++	 * uart_start(), which takes the lock.
++	 */
++	spin_unlock(&port->lock);
++	tty_flip_buffer_push(tty);
++	spin_lock(&port->lock);
 +
-+		list_del_init(&req->queue);
-+		submit_next_request(ep);
-+		request_complete(ep, req, 0);
-+	}
++	UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
 +}
 +
-+static irqreturn_t usba_udc_irq(int irq, void *devid)
++/*
++ * tasklet handling tty stuff outside the interrupt handler.
++ */
++static void atmel_tasklet_func(unsigned long data)
 +{
-+	struct usba_udc *udc = devid;
-+	u32 status;
-+	u32 dma_status;
-+	u32 ep_status;
-+
-+	spin_lock(&udc->lock);
-+
-+	status = usba_readl(udc, INT_STA);
-+	DBG(DBG_INT, "irq, status=%#08x\n", status);
-+
-+	if (status & USBA_DET_SUSPEND) {
-+		usba_writel(udc, INT_CLR, USBA_DET_SUSPEND);
-+		DBG(DBG_BUS, "Suspend detected\n");
-+		if (udc->gadget.speed != USB_SPEED_UNKNOWN
-+				&& udc->driver && udc->driver->suspend) {
-+			spin_unlock(&udc->lock);
-+			udc->driver->suspend(&udc->gadget);
-+			spin_lock(&udc->lock);
-+		}
-+	}
++	struct uart_port *port = (struct uart_port *)data;
++	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
++	unsigned int status;
++	unsigned int status_change;
 +
-+	if (status & USBA_WAKE_UP) {
-+		usba_writel(udc, INT_CLR, USBA_WAKE_UP);
-+		DBG(DBG_BUS, "Wake Up CPU detected\n");
-+	}
++	/* The interrupt handler does not take the lock */
++	spin_lock(&port->lock);
 +
-+	if (status & USBA_END_OF_RESUME) {
-+		usba_writel(udc, INT_CLR, USBA_END_OF_RESUME);
-+		DBG(DBG_BUS, "Resume detected\n");
-+		if (udc->gadget.speed != USB_SPEED_UNKNOWN
-+				&& udc->driver && udc->driver->resume) {
-+			spin_unlock(&udc->lock);
-+			udc->driver->resume(&udc->gadget);
-+			spin_lock(&udc->lock);
-+		}
-+	}
-+
-+	dma_status = USBA_BFEXT(DMA_INT, status);
-+	if (dma_status) {
-+		int i;
++	if (atmel_use_dma_tx(port))
++		atmel_tx_dma(port);
++	else
++		atmel_tx_chars(port);
++
++	status = atmel_port->irq_status;
++	status_change = status ^ atmel_port->irq_status_prev;
++
++	if (status_change & (ATMEL_US_RI | ATMEL_US_DSR
++				| ATMEL_US_DCD | ATMEL_US_CTS)) {
++		/* TODO: All reads to CSR will clear these interrupts! */
++		if (status_change & ATMEL_US_RI)
++			port->icount.rng++;
++		if (status_change & ATMEL_US_DSR)
++			port->icount.dsr++;
++		if (status_change & ATMEL_US_DCD)
+ 			uart_handle_dcd_change(port, !(status & ATMEL_US_DCD));
+-		if (pending & ATMEL_US_CTSIC)
++		if (status_change & ATMEL_US_CTS)
+ 			uart_handle_cts_change(port, !(status & ATMEL_US_CTS));
+-		if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC))
+-			wake_up_interruptible(&port->info->delta_msr_wait);
+ 
+-		/* Interrupt transmit */
+-		if (pending & ATMEL_US_TXRDY)
+-			atmel_tx_chars(port);
++		wake_up_interruptible(&port->info->delta_msr_wait);
+ 
+-		if (pass_counter++ > ATMEL_ISR_PASS_LIMIT)
+-			break;
+-
+-		status = UART_GET_CSR(port);
+-		pending = status & UART_GET_IMR(port);
++		atmel_port->irq_status_prev = status;
+ 	}
+-	return IRQ_HANDLED;
 +
-+		for (i = 1; i < USBA_NR_ENDPOINTS; i++)
-+			if (dma_status & (1 << i))
-+				usba_dma_irq(udc, &usba_ep[i]);
-+	}
++	if (atmel_use_dma_rx(port))
++		atmel_rx_from_dma(port);
++	else
++		atmel_rx_from_ring(port);
 +
-+	ep_status = USBA_BFEXT(EPT_INT, status);
-+	if (ep_status) {
++	spin_unlock(&port->lock);
+ }
+ 
+ /*
+@@ -403,6 +793,8 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id)
+  */
+ static int atmel_startup(struct uart_port *port)
+ {
++	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
++	struct tty_struct *tty = port->info->tty;
+ 	int retval;
+ 
+ 	/*
+@@ -415,13 +807,64 @@ static int atmel_startup(struct uart_port *port)
+ 	/*
+ 	 * Allocate the IRQ
+ 	 */
+-	retval = request_irq(port->irq, atmel_interrupt, IRQF_SHARED, "atmel_serial", port);
++	retval = request_irq(port->irq, atmel_interrupt, IRQF_SHARED,
++			tty ? tty->name : "atmel_serial", port);
+ 	if (retval) {
+ 		printk("atmel_serial: atmel_startup - Can't get irq\n");
+ 		return retval;
+ 	}
+ 
+ 	/*
++	 * Initialize DMA (if necessary)
++	 */
++	if (atmel_use_dma_rx(port)) {
 +		int i;
 +
-+		for (i = 0; i < USBA_NR_ENDPOINTS; i++)
-+			if (ep_status & (1 << i)) {
-+				if (ep_is_control(&usba_ep[i]))
-+					usba_control_irq(udc, &usba_ep[i]);
-+				else
-+					usba_ep_irq(udc, &usba_ep[i]);
++		for (i = 0; i < 2; i++) {
++			struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
++
++			pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL);
++			if (pdc->buf == NULL) {
++				if (i != 0) {
++					dma_unmap_single(port->dev,
++						atmel_port->pdc_rx[0].dma_addr,
++						PDC_BUFFER_SIZE,
++						DMA_FROM_DEVICE);
++					kfree(atmel_port->pdc_rx[0].buf);
++				}
++				free_irq(port->irq, port);
++				return -ENOMEM;
 +			}
-+	}
-+
-+	if (status & USBA_END_OF_RESET) {
-+		struct usba_ep *ep0;
-+
-+		usba_writel(udc, INT_CLR, USBA_END_OF_RESET);
-+		reset_all_endpoints(udc);
-+
-+		if (status & USBA_HIGH_SPEED) {
-+			DBG(DBG_BUS, "High-speed bus reset detected\n");
-+			udc->gadget.speed = USB_SPEED_HIGH;
-+		} else {
-+			DBG(DBG_BUS, "Full-speed bus reset detected\n");
-+			udc->gadget.speed = USB_SPEED_FULL;
++			pdc->dma_addr = dma_map_single(port->dev,
++						       pdc->buf,
++						       PDC_BUFFER_SIZE,
++						       DMA_FROM_DEVICE);
++			pdc->dma_size = PDC_BUFFER_SIZE;
++			pdc->ofs = 0;
 +		}
 +
-+		ep0 = &usba_ep[0];
-+		ep0->desc = &usba_ep0_desc;
-+		ep0->state = WAIT_FOR_SETUP;
-+		usba_ep_writel(ep0, CFG,
-+				(USBA_BF(EPT_SIZE, EP0_EPT_SIZE)
-+				| USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL)
-+				| USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE)));
-+		usba_ep_writel(ep0, CTL_ENB,
-+				USBA_EPT_ENABLE | USBA_RX_SETUP);
-+		usba_writel(udc, INT_ENB,
-+				(usba_readl(udc, INT_ENB)
-+				| USBA_BF(EPT_INT, 1)
-+				| USBA_DET_SUSPEND
-+				| USBA_END_OF_RESUME));
-+
-+		if (!(usba_ep_readl(ep0, CFG) & USBA_EPT_MAPPED))
-+			dev_warn(&udc->pdev->dev,
-+				 "WARNING: EP0 configuration is invalid!\n");
-+	}
-+
-+	spin_unlock(&udc->lock);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t usba_vbus_irq(int irq, void *devid)
-+{
-+	struct usba_udc *udc = devid;
-+	int vbus;
-+
-+	/* debounce */
-+	udelay(10);
-+
-+	spin_lock(&udc->lock);
-+
-+	/* May happen if Vbus pin toggles during probe() */
-+	if (!udc->driver)
-+		goto out;
-+
-+	vbus = gpio_get_value(udc->vbus_pin);
-+	if (vbus != udc->vbus_prev) {
-+		if (vbus) {
-+			usba_writel(udc, CTRL, USBA_EN_USBA);
-+			usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
-+		} else {
-+			udc->gadget.speed = USB_SPEED_UNKNOWN;
-+			reset_all_endpoints(udc);
-+			usba_writel(udc, CTRL, 0);
-+			spin_unlock(&udc->lock);
-+			udc->driver->disconnect(&udc->gadget);
-+			spin_lock(&udc->lock);
-+		}
-+		udc->vbus_prev = vbus;
-+	}
-+
-+out:
-+	spin_unlock(&udc->lock);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
-+{
-+	struct usba_udc *udc = &the_udc;
-+	unsigned long flags;
-+	int ret;
++		atmel_port->pdc_rx_idx = 0;
 +
-+	if (!udc->pdev)
-+		return -ENODEV;
++		UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr);
++		UART_PUT_RCR(port, PDC_BUFFER_SIZE);
 +
-+	spin_lock_irqsave(&udc->lock, flags);
-+	if (udc->driver) {
-+		spin_unlock_irqrestore(&udc->lock, flags);
-+		return -EBUSY;
++		UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr);
++		UART_PUT_RNCR(port, PDC_BUFFER_SIZE);
 +	}
-+
-+	udc->driver = driver;
-+	udc->gadget.dev.driver = &driver->driver;
-+	spin_unlock_irqrestore(&udc->lock, flags);
-+
-+	clk_enable(udc->pclk);
-+	clk_enable(udc->hclk);
-+
-+	ret = driver->bind(&udc->gadget);
-+	if (ret) {
-+		DBG(DBG_ERR, "Could not bind to driver %s: error %d\n",
-+			driver->driver.name, ret);
-+		goto err_driver_bind;
++	if (atmel_use_dma_tx(port)) {
++		struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
++		struct circ_buf *xmit = &port->info->xmit;
++
++		pdc->buf = xmit->buf;
++		pdc->dma_addr = dma_map_single(port->dev,
++					       pdc->buf,
++					       UART_XMIT_SIZE,
++					       DMA_TO_DEVICE);
++		pdc->dma_size = UART_XMIT_SIZE;
++		pdc->ofs = 0;
 +	}
 +
-+	DBG(DBG_GADGET, "registered driver `%s'\n", driver->driver.name);
-+
-+	udc->vbus_prev = 0;
-+	if (udc->vbus_pin != -1)
-+		enable_irq(gpio_to_irq(udc->vbus_pin));
-+
-+	/* If Vbus is present, enable the controller and wait for reset */
-+	spin_lock_irqsave(&udc->lock, flags);
-+	if (vbus_is_present(udc) && udc->vbus_prev == 0) {
-+		usba_writel(udc, CTRL, USBA_EN_USBA);
-+		usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
++	/*
+ 	 * If there is a specific "open" function (to register
+ 	 * control line interrupts)
+ 	 */
+@@ -437,9 +880,21 @@ static int atmel_startup(struct uart_port *port)
+ 	 * Finally, enable the serial port
+ 	 */
+ 	UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
+-	UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);		/* enable xmit & rcvr */
++	/* enable xmit & rcvr */
++	UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
+ 
+-	UART_PUT_IER(port, ATMEL_US_RXRDY);		/* enable receive only */
++	if (atmel_use_dma_rx(port)) {
++		/* set UART timeout */
++		UART_PUT_RTOR(port, PDC_RX_TIMEOUT);
++		UART_PUT_CR(port, ATMEL_US_STTTO);
++
++		UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
++		/* enable PDC controller */
++		UART_PUT_PTCR(port, ATMEL_PDC_RXTEN);
++	} else {
++		/* enable receive only */
++		UART_PUT_IER(port, ATMEL_US_RXRDY);
 +	}
-+	spin_unlock_irqrestore(&udc->lock, flags);
-+
-+	return 0;
-+
-+err_driver_bind:
-+	udc->driver = NULL;
-+	udc->gadget.dev.driver = NULL;
-+	return ret;
-+}
-+EXPORT_SYMBOL(usb_gadget_register_driver);
-+
-+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
-+{
-+	struct usba_udc *udc = &the_udc;
-+	unsigned long flags;
-+
-+	if (!udc->pdev)
-+		return -ENODEV;
-+	if (driver != udc->driver)
-+		return -EINVAL;
-+
-+	if (udc->vbus_pin != -1)
-+		disable_irq(gpio_to_irq(udc->vbus_pin));
-+
-+	spin_lock_irqsave(&udc->lock, flags);
-+	udc->gadget.speed = USB_SPEED_UNKNOWN;
-+	reset_all_endpoints(udc);
-+	spin_unlock_irqrestore(&udc->lock, flags);
-+
-+	/* This will also disable the DP pullup */
-+	usba_writel(udc, CTRL, 0);
-+
-+	driver->unbind(&udc->gadget);
-+	udc->gadget.dev.driver = NULL;
-+	udc->driver = NULL;
-+
-+	clk_disable(udc->hclk);
-+	clk_disable(udc->pclk);
-+
-+	DBG(DBG_GADGET, "unregistered driver `%s'\n", driver->driver.name);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(usb_gadget_unregister_driver);
-+
-+static int __init usba_udc_probe(struct platform_device *pdev)
-+{
-+	struct usba_platform_data *pdata = pdev->dev.platform_data;
-+	struct resource *regs, *fifo;
-+	struct clk *pclk, *hclk;
-+	struct usba_udc *udc = &the_udc;
-+	int irq, ret, i;
+ 
+ 	return 0;
+ }
+@@ -449,6 +904,38 @@ static int atmel_startup(struct uart_port *port)
+  */
+ static void atmel_shutdown(struct uart_port *port)
+ {
++	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
++	/*
++	 * Ensure everything is stopped.
++	 */
++	atmel_stop_rx(port);
++	atmel_stop_tx(port);
 +
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID);
-+	fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID);
-+	if (!regs || !fifo)
-+		return -ENXIO;
++	/*
++	 * Shut-down the DMA.
++	 */
++	if (atmel_use_dma_rx(port)) {
++		int i;
 +
-+	irq = platform_get_irq(pdev, 0);
-+	if (irq < 0)
-+		return irq;
++		for (i = 0; i < 2; i++) {
++			struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
 +
-+	pclk = clk_get(&pdev->dev, "pclk");
-+	if (IS_ERR(pclk))
-+		return PTR_ERR(pclk);
-+	hclk = clk_get(&pdev->dev, "hclk");
-+	if (IS_ERR(hclk)) {
-+		ret = PTR_ERR(hclk);
-+		goto err_get_hclk;
++			dma_unmap_single(port->dev,
++					 pdc->dma_addr,
++					 pdc->dma_size,
++					 DMA_FROM_DEVICE);
++			kfree(pdc->buf);
++		}
 +	}
++	if (atmel_use_dma_tx(port)) {
++		struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
 +
-+	udc->pdev = pdev;
-+	udc->pclk = pclk;
-+	udc->hclk = hclk;
-+	udc->vbus_pin = -1;
-+
-+	ret = -ENOMEM;
-+	udc->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+	if (!udc->regs) {
-+		dev_err(&pdev->dev, "Unable to map I/O memory, aborting.\n");
-+		goto err_map_regs;
++		dma_unmap_single(port->dev,
++				 pdc->dma_addr,
++				 pdc->dma_size,
++				 DMA_TO_DEVICE);
 +	}
-+	dev_info(&pdev->dev, "MMIO registers at 0x%08lx mapped at %p\n",
-+		 (unsigned long)regs->start, udc->regs);
-+	udc->fifo = ioremap(fifo->start, fifo->end - fifo->start + 1);
-+	if (!udc->fifo) {
-+		dev_err(&pdev->dev, "Unable to map FIFO, aborting.\n");
-+		goto err_map_fifo;
-+	}
-+	dev_info(&pdev->dev, "FIFO at 0x%08lx mapped at %p\n",
-+		 (unsigned long)fifo->start, udc->fifo);
-+
-+	device_initialize(&udc->gadget.dev);
-+	udc->gadget.dev.parent = &pdev->dev;
-+	udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
 +
-+	platform_set_drvdata(pdev, udc);
-+
-+	/* Make sure we start from a clean slate */
-+	clk_enable(pclk);
-+	usba_writel(udc, CTRL, 0);
-+	clk_disable(pclk);
-+
-+	INIT_LIST_HEAD(&usba_ep[0].ep.ep_list);
-+	usba_ep[0].ep_regs = udc->regs + USBA_EPT_BASE(0);
-+	usba_ep[0].dma_regs = udc->regs + USBA_DMA_BASE(0);
-+	usba_ep[0].fifo = udc->fifo + USBA_FIFO_BASE(0);
-+	for (i = 1; i < ARRAY_SIZE(usba_ep); i++) {
-+		struct usba_ep *ep = &usba_ep[i];
+ 	/*
+ 	 * Disable all interrupts, port and break condition.
+ 	 */
+@@ -471,45 +958,48 @@ static void atmel_shutdown(struct uart_port *port)
+ /*
+  * Power / Clock management.
+  */
+-static void atmel_serial_pm(struct uart_port *port, unsigned int state, unsigned int oldstate)
++static void atmel_serial_pm(struct uart_port *port, unsigned int state,
++			    unsigned int oldstate)
+ {
+-	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ 
+ 	switch (state) {
+-		case 0:
+-			/*
+-			 * Enable the peripheral clock for this serial port.
+-			 * This is called on uart_open() or a resume event.
+-			 */
+-			clk_enable(atmel_port->clk);
+-			break;
+-		case 3:
+-			/*
+-			 * Disable the peripheral clock for this serial port.
+-			 * This is called on uart_close() or a suspend event.
+-			 */
+-			clk_disable(atmel_port->clk);
+-			break;
+-		default:
+-			printk(KERN_ERR "atmel_serial: unknown pm %d\n", state);
++	case 0:
++		/*
++		 * Enable the peripheral clock for this serial port.
++		 * This is called on uart_open() or a resume event.
++		 */
++		clk_enable(atmel_port->clk);
++		break;
++	case 3:
++		/*
++		 * Disable the peripheral clock for this serial port.
++		 * This is called on uart_close() or a suspend event.
++		 */
++		clk_disable(atmel_port->clk);
++		break;
++	default:
++		printk(KERN_ERR "atmel_serial: unknown pm %d\n", state);
+ 	}
+ }
+ 
+ /*
+  * Change the port parameters
+  */
+-static void atmel_set_termios(struct uart_port *port, struct ktermios * termios, struct ktermios * old)
++static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
++			      struct ktermios *old)
+ {
+ 	unsigned long flags;
+ 	unsigned int mode, imr, quot, baud;
+ 
+ 	/* Get current mode register */
+-	mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL | ATMEL_US_NBSTOP | ATMEL_US_PAR);
++	mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL
++					| ATMEL_US_NBSTOP | ATMEL_US_PAR);
+ 
+-	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
++	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
+ 	quot = uart_get_divisor(port, baud);
+ 
+-	if (quot > 65535) {		/* BRGR is 16-bit, so switch to slower clock */
++	if (quot > 65535) {	/* BRGR is 16-bit, so switch to slower clock */
+ 		quot /= 8;
+ 		mode |= ATMEL_US_USCLKS_MCK_DIV8;
+ 	}
+@@ -536,18 +1026,17 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios * termios,
+ 
+ 	/* parity */
+ 	if (termios->c_cflag & PARENB) {
+-		if (termios->c_cflag & CMSPAR) {			/* Mark or Space parity */
++		/* Mark or Space parity */
++		if (termios->c_cflag & CMSPAR) {
+ 			if (termios->c_cflag & PARODD)
+ 				mode |= ATMEL_US_PAR_MARK;
+ 			else
+ 				mode |= ATMEL_US_PAR_SPACE;
+-		}
+-		else if (termios->c_cflag & PARODD)
++		} else if (termios->c_cflag & PARODD)
+ 			mode |= ATMEL_US_PAR_ODD;
+ 		else
+ 			mode |= ATMEL_US_PAR_EVEN;
+-	}
+-	else
++	} else
+ 		mode |= ATMEL_US_PAR_NONE;
+ 
+ 	spin_lock_irqsave(&port->lock, flags);
+@@ -558,6 +1047,10 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios * termios,
+ 	if (termios->c_iflag & (BRKINT | PARMRK))
+ 		port->read_status_mask |= ATMEL_US_RXBRK;
+ 
++	if (atmel_use_dma_rx(port))
++		/* need to enable error interrupts */
++		UART_PUT_IER(port, port->read_status_mask);
 +
-+		ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
-+		ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
-+		ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
+ 	/*
+ 	 * Characters to ignore
+ 	 */
+@@ -573,16 +1066,16 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios * termios,
+ 		if (termios->c_iflag & IGNPAR)
+ 			port->ignore_status_mask |= ATMEL_US_OVRE;
+ 	}
+-
+-	// TODO: Ignore all characters if CREAD is set.
++	/* TODO: Ignore all characters if CREAD is set.*/
+ 
+ 	/* update the per-port timeout */
+ 	uart_update_timeout(port, termios->c_cflag, baud);
+ 
+-	/* disable interrupts and drain transmitter */
+-	imr = UART_GET_IMR(port);	/* get interrupt mask */
+-	UART_PUT_IDR(port, -1);		/* disable all interrupts */
+-	while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY)) { barrier(); }
++	/* save/disable interrupts and drain transmitter */
++	imr = UART_GET_IMR(port);
++	UART_PUT_IDR(port, -1);
++	while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY))
++		cpu_relax();
+ 
+ 	/* disable receiver and transmitter */
+ 	UART_PUT_CR(port, ATMEL_US_TXDIS | ATMEL_US_RXDIS);
+@@ -708,7 +1201,8 @@ static struct uart_ops atmel_pops = {
+ /*
+  * Configure the port from the platform device resource info.
+  */
+-static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, struct platform_device *pdev)
++static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port,
++				      struct platform_device *pdev)
+ {
+ 	struct uart_port *port = &atmel_port->uart;
+ 	struct atmel_uart_data *data = pdev->dev.platform_data;
+@@ -723,6 +1217,11 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, struct
+ 	port->mapbase	= pdev->resource[0].start;
+ 	port->irq	= pdev->resource[1].start;
+ 
++	tasklet_init(&atmel_port->tasklet, atmel_tasklet_func,
++			(unsigned long)port);
 +
-+		list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
-+	}
++	memset(&atmel_port->rx_ring, 0, sizeof(atmel_port->rx_ring));
 +
-+	ret = request_irq(irq, usba_udc_irq, 0, "atmel_usba_udc", udc);
-+	if (ret) {
-+		dev_err(&pdev->dev, "Cannot request irq %d (error %d)\n",
-+			irq, ret);
-+		goto err_request_irq;
-+	}
-+	udc->irq = irq;
+ 	if (data->regs)
+ 		/* Already mapped by setup code */
+ 		port->membase = data->regs;
+@@ -731,11 +1230,17 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, struct
+ 		port->membase	= NULL;
+ 	}
+ 
+-	if (!atmel_port->clk) {		/* for console, the clock could already be configured */
++	/* for console, the clock could already be configured */
++	if (!atmel_port->clk) {
+ 		atmel_port->clk = clk_get(&pdev->dev, "usart");
+ 		clk_enable(atmel_port->clk);
+ 		port->uartclk = clk_get_rate(atmel_port->clk);
+ 	}
 +
-+	ret = device_add(&udc->gadget.dev);
-+	if (ret) {
-+		dev_dbg(&pdev->dev, "Could not add gadget: %d\n", ret);
-+		goto err_device_add;
-+	}
-+
-+	if (pdata && pdata->vbus_pin != GPIO_PIN_NONE) {
-+		if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) {
-+			udc->vbus_pin = pdata->vbus_pin;
-+
-+			ret = request_irq(gpio_to_irq(udc->vbus_pin),
-+					usba_vbus_irq, 0,
-+					"atmel_usba_udc", udc);
-+			if (ret) {
-+				gpio_free(udc->vbus_pin);
-+				udc->vbus_pin = -1;
-+				dev_warn(&udc->pdev->dev,
-+					 "failed to request vbus irq; "
-+					 "assuming always on\n");
-+			} else {
-+				disable_irq(gpio_to_irq(udc->vbus_pin));
-+			}
-+		}
++	atmel_port->use_dma_rx = data->use_dma_rx;
++	atmel_port->use_dma_tx = data->use_dma_tx;
++	if (atmel_use_dma_tx(port))
++		port->fifosize = PDC_BUFFER_SIZE;
+ }
+ 
+ /*
+@@ -755,12 +1260,11 @@ void __init atmel_register_uart_fns(struct atmel_port_fns *fns)
+ 	atmel_pops.set_wake	= fns->set_wake;
+ }
+ 
+-
+ #ifdef CONFIG_SERIAL_ATMEL_CONSOLE
+ static void atmel_console_putchar(struct uart_port *port, int ch)
+ {
+ 	while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY))
+-		barrier();
++		cpu_relax();
+ 	UART_PUT_CHAR(port, ch);
+ }
+ 
+@@ -773,38 +1277,40 @@ static void atmel_console_write(struct console *co, const char *s, u_int count)
+ 	unsigned int status, imr;
+ 
+ 	/*
+-	 *	First, save IMR and then disable interrupts
++	 * First, save IMR and then disable interrupts
+ 	 */
+-	imr = UART_GET_IMR(port);	/* get interrupt mask */
++	imr = UART_GET_IMR(port);
+ 	UART_PUT_IDR(port, ATMEL_US_RXRDY | ATMEL_US_TXRDY);
+ 
+ 	uart_console_write(port, s, count, atmel_console_putchar);
+ 
+ 	/*
+-	 *	Finally, wait for transmitter to become empty
+-	 *	and restore IMR
++	 * Finally, wait for transmitter to become empty
++	 * and restore IMR
+ 	 */
+ 	do {
+ 		status = UART_GET_CSR(port);
+ 	} while (!(status & ATMEL_US_TXRDY));
+-	UART_PUT_IER(port, imr);	/* set interrupts back the way they were */
++	/* set interrupts back the way they were */
++	UART_PUT_IER(port, imr);
+ }
+ 
+ /*
+- * If the port was already initialised (eg, by a boot loader), try to determine
+- * the current setup.
++ * If the port was already initialised (eg, by a boot loader),
++ * try to determine the current setup.
+  */
+-static void __init atmel_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
++static void __init atmel_console_get_options(struct uart_port *port, int *baud,
++					     int *parity, int *bits)
+ {
+ 	unsigned int mr, quot;
+ 
+-// TODO: CR is a write-only register
+-//	unsigned int cr;
+-//
+-//	cr = UART_GET_CR(port) & (ATMEL_US_RXEN | ATMEL_US_TXEN);
+-//	if (cr == (ATMEL_US_RXEN | ATMEL_US_TXEN)) {
+-//		/* ok, the port was enabled */
+-//	}
++	/*
++	 * If the baud rate generator isn't running, the port wasn't
++	 * initialized by the boot loader.
++	 */
++	quot = UART_GET_BRGR(port);
++	if (!quot)
++		return;
+ 
+ 	mr = UART_GET_MR(port) & ATMEL_US_CHRL;
+ 	if (mr == ATMEL_US_CHRL_8)
+@@ -824,7 +1330,6 @@ static void __init atmel_console_get_options(struct uart_port *port, int *baud,
+ 	 * lower than one of those, as it would make us fall through
+ 	 * to a much lower baud rate than we really want.
+ 	 */
+-	quot = UART_GET_BRGR(port);
+ 	*baud = port->uartclk / (16 * (quot - 1));
+ }
+ 
+@@ -836,10 +1341,12 @@ static int __init atmel_console_setup(struct console *co, char *options)
+ 	int parity = 'n';
+ 	int flow = 'n';
+ 
+-	if (port->membase == 0)		/* Port not initialized yet - delay setup */
++	if (port->membase == NULL) {
++		/* Port not initialized yet - delay setup */
+ 		return -ENODEV;
 +	}
+ 
+-	UART_PUT_IDR(port, -1);				/* disable interrupts */
++	UART_PUT_IDR(port, -1);
+ 	UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
+ 	UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
+ 
+@@ -871,13 +1378,16 @@ static struct console atmel_console = {
+ static int __init atmel_console_init(void)
+ {
+ 	if (atmel_default_console_device) {
+-		add_preferred_console(ATMEL_DEVICENAME, atmel_default_console_device->id, NULL);
+-		atmel_init_port(&(atmel_ports[atmel_default_console_device->id]), atmel_default_console_device);
++		add_preferred_console(ATMEL_DEVICENAME,
++				      atmel_default_console_device->id, NULL);
++		atmel_init_port(&atmel_ports[atmel_default_console_device->id],
++				atmel_default_console_device);
+ 		register_console(&atmel_console);
+ 	}
+ 
+ 	return 0;
+ }
 +
-+	usba_init_debugfs(udc);
-+	for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
-+		usba_ep_init_debugfs(udc, &usba_ep[i]);
-+
-+	return 0;
-+
-+err_device_add:
-+	free_irq(irq, udc);
-+err_request_irq:
-+	iounmap(udc->fifo);
-+err_map_fifo:
-+	iounmap(udc->regs);
-+err_map_regs:
-+	clk_put(hclk);
-+err_get_hclk:
-+	clk_put(pclk);
-+
-+	platform_set_drvdata(pdev, NULL);
-+
-+	return ret;
-+}
+ console_initcall(atmel_console_init);
+ 
+ /*
+@@ -885,34 +1395,48 @@ console_initcall(atmel_console_init);
+  */
+ static int __init atmel_late_console_init(void)
+ {
+-	if (atmel_default_console_device && !(atmel_console.flags & CON_ENABLED))
++	if (atmel_default_console_device
++	    && !(atmel_console.flags & CON_ENABLED))
+ 		register_console(&atmel_console);
+ 
+ 	return 0;
+ }
 +
-+static int __exit usba_udc_remove(struct platform_device *pdev)
+ core_initcall(atmel_late_console_init);
+ 
++static inline bool atmel_is_console_port(struct uart_port *port)
 +{
-+	struct usba_udc *udc;
-+	int i;
-+
-+	udc = platform_get_drvdata(pdev);
-+
-+	for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
-+		usba_ep_cleanup_debugfs(&usba_ep[i]);
-+	usba_cleanup_debugfs(udc);
-+
-+	if (udc->vbus_pin != -1)
-+		gpio_free(udc->vbus_pin);
-+
-+	free_irq(udc->irq, udc);
-+	iounmap(udc->fifo);
-+	iounmap(udc->regs);
-+	clk_put(udc->hclk);
-+	clk_put(udc->pclk);
-+
-+	device_unregister(&udc->gadget.dev);
-+
-+	return 0;
++	return port->cons && port->cons->index == port->line;
 +}
 +
-+static struct platform_driver udc_driver = {
-+	.remove		= __exit_p(usba_udc_remove),
-+	.driver		= {
-+		.name		= "atmel_usba_udc",
-+	},
-+};
-+
-+static int __init udc_init(void)
-+{
-+	return platform_driver_probe(&udc_driver, usba_udc_probe);
-+}
-+module_init(udc_init);
+ #else
+ #define ATMEL_CONSOLE_DEVICE	NULL
 +
-+static void __exit udc_exit(void)
++static inline bool atmel_is_console_port(struct uart_port *port)
 +{
-+	platform_driver_unregister(&udc_driver);
++	return false;
 +}
-+module_exit(udc_exit);
-+
-+MODULE_DESCRIPTION("Atmel USBA UDC driver");
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h
-new file mode 100644
-index 0000000..f4f0f8b
---- /dev/null
-+++ b/drivers/usb/gadget/atmel_usba_udc.h
-@@ -0,0 +1,350 @@
-+/*
-+ * Driver for the Atmel USBA high speed USB device controller
-+ *
-+ * Copyright (C) 2005-2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __LINUX_USB_GADGET_USBA_UDC_H__
-+#define __LINUX_USB_GADGET_USBA_UDC_H__
-+
-+/* USB register offsets */
-+#define USBA_CTRL				0x0000
-+#define USBA_FNUM				0x0004
-+#define USBA_INT_ENB				0x0010
-+#define USBA_INT_STA				0x0014
-+#define USBA_INT_CLR				0x0018
-+#define USBA_EPT_RST				0x001c
-+#define USBA_TST				0x00e0
-+
-+/* USB endpoint register offsets */
-+#define USBA_EPT_CFG				0x0000
-+#define USBA_EPT_CTL_ENB			0x0004
-+#define USBA_EPT_CTL_DIS			0x0008
-+#define USBA_EPT_CTL				0x000c
-+#define USBA_EPT_SET_STA			0x0014
-+#define USBA_EPT_CLR_STA			0x0018
-+#define USBA_EPT_STA				0x001c
-+
-+/* USB DMA register offsets */
-+#define USBA_DMA_NXT_DSC			0x0000
-+#define USBA_DMA_ADDRESS			0x0004
-+#define USBA_DMA_CONTROL			0x0008
-+#define USBA_DMA_STATUS				0x000c
-+
-+/* Bitfields in CTRL */
-+#define USBA_DEV_ADDR_OFFSET			0
-+#define USBA_DEV_ADDR_SIZE			7
-+#define USBA_FADDR_EN				(1 <<  7)
-+#define USBA_EN_USBA				(1 <<  8)
-+#define USBA_DETACH				(1 <<  9)
-+#define USBA_REMOTE_WAKE_UP			(1 << 10)
-+
-+/* Bitfields in FNUM */
-+#define USBA_MICRO_FRAME_NUM_OFFSET		0
-+#define USBA_MICRO_FRAME_NUM_SIZE		3
-+#define USBA_FRAME_NUMBER_OFFSET		3
-+#define USBA_FRAME_NUMBER_SIZE			11
-+#define USBA_FRAME_NUM_ERROR			(1 << 31)
-+
-+/* Bitfields in INT_ENB/INT_STA/INT_CLR */
-+#define USBA_HIGH_SPEED				(1 <<  0)
-+#define USBA_DET_SUSPEND			(1 <<  1)
-+#define USBA_MICRO_SOF				(1 <<  2)
-+#define USBA_SOF				(1 <<  3)
-+#define USBA_END_OF_RESET			(1 <<  4)
-+#define USBA_WAKE_UP				(1 <<  5)
-+#define USBA_END_OF_RESUME			(1 <<  6)
-+#define USBA_UPSTREAM_RESUME			(1 <<  7)
-+#define USBA_EPT_INT_OFFSET			8
-+#define USBA_EPT_INT_SIZE			16
-+#define USBA_DMA_INT_OFFSET			24
-+#define USBA_DMA_INT_SIZE			8
-+
-+/* Bitfields in EPT_RST */
-+#define USBA_RST_OFFSET				0
-+#define USBA_RST_SIZE				16
-+
-+/* Bitfields in USBA_TST */
-+#define USBA_SPEED_CFG_OFFSET			0
-+#define USBA_SPEED_CFG_SIZE			2
-+#define USBA_TST_J_MODE				(1 <<  2)
-+#define USBA_TST_K_MODE				(1 <<  3)
-+#define USBA_TST_PKT_MODE			(1 <<  4)
-+#define USBA_OPMODE2				(1 <<  5)
-+
-+/* Bitfields in EPT_CFG */
-+#define USBA_EPT_SIZE_OFFSET			0
-+#define USBA_EPT_SIZE_SIZE			3
-+#define USBA_EPT_DIR_IN				(1 <<  3)
-+#define USBA_EPT_TYPE_OFFSET			4
-+#define USBA_EPT_TYPE_SIZE			2
-+#define USBA_BK_NUMBER_OFFSET			6
-+#define USBA_BK_NUMBER_SIZE			2
-+#define USBA_NB_TRANS_OFFSET			8
-+#define USBA_NB_TRANS_SIZE			2
-+#define USBA_EPT_MAPPED				(1 << 31)
-+
-+/* Bitfields in EPT_CTL/EPT_CTL_ENB/EPT_CTL_DIS */
-+#define USBA_EPT_ENABLE				(1 <<  0)
-+#define USBA_AUTO_VALID				(1 <<  1)
-+#define USBA_INTDIS_DMA				(1 <<  3)
-+#define USBA_NYET_DIS				(1 <<  4)
-+#define USBA_DATAX_RX				(1 <<  6)
-+#define USBA_MDATA_RX				(1 <<  7)
-+/* Bits 8-15 and 31 enable interrupts for respective bits in EPT_STA */
-+#define USBA_BUSY_BANK_IE			(1 << 18)
-+
-+/* Bitfields in EPT_SET_STA/EPT_CLR_STA/EPT_STA */
-+#define USBA_FORCE_STALL			(1 <<  5)
-+#define USBA_TOGGLE_CLR				(1 <<  6)
-+#define USBA_TOGGLE_SEQ_OFFSET			6
-+#define USBA_TOGGLE_SEQ_SIZE			2
-+#define USBA_ERR_OVFLW				(1 <<  8)
-+#define USBA_RX_BK_RDY				(1 <<  9)
-+#define USBA_KILL_BANK				(1 <<  9)
-+#define USBA_TX_COMPLETE			(1 << 10)
-+#define USBA_TX_PK_RDY				(1 << 11)
-+#define USBA_ISO_ERR_TRANS			(1 << 11)
-+#define USBA_RX_SETUP				(1 << 12)
-+#define USBA_ISO_ERR_FLOW			(1 << 12)
-+#define USBA_STALL_SENT				(1 << 13)
-+#define USBA_ISO_ERR_CRC			(1 << 13)
-+#define USBA_ISO_ERR_NBTRANS			(1 << 13)
-+#define USBA_NAK_IN				(1 << 14)
-+#define USBA_ISO_ERR_FLUSH			(1 << 14)
-+#define USBA_NAK_OUT				(1 << 15)
-+#define USBA_CURRENT_BANK_OFFSET		16
-+#define USBA_CURRENT_BANK_SIZE			2
-+#define USBA_BUSY_BANKS_OFFSET			18
-+#define USBA_BUSY_BANKS_SIZE			2
-+#define USBA_BYTE_COUNT_OFFSET			20
-+#define USBA_BYTE_COUNT_SIZE			11
-+#define USBA_SHORT_PACKET			(1 << 31)
-+
-+/* Bitfields in DMA_CONTROL */
-+#define USBA_DMA_CH_EN				(1 <<  0)
-+#define USBA_DMA_LINK				(1 <<  1)
-+#define USBA_DMA_END_TR_EN			(1 <<  2)
-+#define USBA_DMA_END_BUF_EN			(1 <<  3)
-+#define USBA_DMA_END_TR_IE			(1 <<  4)
-+#define USBA_DMA_END_BUF_IE			(1 <<  5)
-+#define USBA_DMA_DESC_LOAD_IE			(1 <<  6)
-+#define USBA_DMA_BURST_LOCK			(1 <<  7)
-+#define USBA_DMA_BUF_LEN_OFFSET			16
-+#define USBA_DMA_BUF_LEN_SIZE			16
-+
-+/* Bitfields in DMA_STATUS */
-+#define USBA_DMA_CH_ACTIVE			(1 <<  1)
-+#define USBA_DMA_END_TR_ST			(1 <<  4)
-+#define USBA_DMA_END_BUF_ST			(1 <<  5)
-+#define USBA_DMA_DESC_LOAD_ST			(1 <<  6)
-+
-+/* Constants for SPEED_CFG */
-+#define USBA_SPEED_CFG_NORMAL			0
-+#define USBA_SPEED_CFG_FORCE_HIGH		2
-+#define USBA_SPEED_CFG_FORCE_FULL		3
-+
-+/* Constants for EPT_SIZE */
-+#define USBA_EPT_SIZE_8				0
-+#define USBA_EPT_SIZE_16			1
-+#define USBA_EPT_SIZE_32			2
-+#define USBA_EPT_SIZE_64			3
-+#define USBA_EPT_SIZE_128			4
-+#define USBA_EPT_SIZE_256			5
-+#define USBA_EPT_SIZE_512			6
-+#define USBA_EPT_SIZE_1024			7
-+
-+/* Constants for EPT_TYPE */
-+#define USBA_EPT_TYPE_CONTROL			0
-+#define USBA_EPT_TYPE_ISO			1
-+#define USBA_EPT_TYPE_BULK			2
-+#define USBA_EPT_TYPE_INT			3
-+
-+/* Constants for BK_NUMBER */
-+#define USBA_BK_NUMBER_ZERO			0
-+#define USBA_BK_NUMBER_ONE			1
-+#define USBA_BK_NUMBER_DOUBLE			2
-+#define USBA_BK_NUMBER_TRIPLE			3
-+
-+/* Bit manipulation macros */
-+#define USBA_BF(name, value)					\
-+	(((value) & ((1 << USBA_##name##_SIZE) - 1))		\
-+	 << USBA_##name##_OFFSET)
-+#define USBA_BFEXT(name, value)					\
-+	(((value) >> USBA_##name##_OFFSET)			\
-+	 & ((1 << USBA_##name##_SIZE) - 1))
-+#define USBA_BFINS(name, value, old)				\
-+	(((old) & ~(((1 << USBA_##name##_SIZE) - 1)		\
-+		    << USBA_##name##_OFFSET))			\
-+	 | USBA_BF(name, value))
-+
-+/* Register access macros */
-+#define usba_readl(udc, reg)					\
-+	__raw_readl((udc)->regs + USBA_##reg)
-+#define usba_writel(udc, reg, value)				\
-+	__raw_writel((value), (udc)->regs + USBA_##reg)
-+#define usba_ep_readl(ep, reg)					\
-+	__raw_readl((ep)->ep_regs + USBA_EPT_##reg)
-+#define usba_ep_writel(ep, reg, value)				\
-+	__raw_writel((value), (ep)->ep_regs + USBA_EPT_##reg)
-+#define usba_dma_readl(ep, reg)					\
-+	__raw_readl((ep)->dma_regs + USBA_DMA_##reg)
-+#define usba_dma_writel(ep, reg, value)				\
-+	__raw_writel((value), (ep)->dma_regs + USBA_DMA_##reg)
-+
-+/* Calculate base address for a given endpoint or DMA controller */
-+#define USBA_EPT_BASE(x)	(0x100 + (x) * 0x20)
-+#define USBA_DMA_BASE(x)	(0x300 + (x) * 0x10)
-+#define USBA_FIFO_BASE(x)	((x) << 16)
-+
-+/* Synth parameters */
-+#define USBA_NR_ENDPOINTS	7
-+
-+#define EP0_FIFO_SIZE		64
-+#define EP0_EPT_SIZE		USBA_EPT_SIZE_64
-+#define EP0_NR_BANKS		1
-+
-+/*
-+ * REVISIT: Try to eliminate this value. Can we rely on req->mapped to
-+ * provide this information?
-+ */
-+#define DMA_ADDR_INVALID (~(dma_addr_t)0)
-+
-+#define FIFO_IOMEM_ID	0
-+#define CTRL_IOMEM_ID	1
-+
-+#ifdef DEBUG
-+#define DBG_ERR		0x0001	/* report all error returns */
-+#define DBG_HW		0x0002	/* debug hardware initialization */
-+#define DBG_GADGET	0x0004	/* calls to/from gadget driver */
-+#define DBG_INT		0x0008	/* interrupts */
-+#define DBG_BUS		0x0010	/* report changes in bus state */
-+#define DBG_QUEUE	0x0020  /* debug request queue processing */
-+#define DBG_FIFO	0x0040  /* debug FIFO contents */
-+#define DBG_DMA		0x0080  /* debug DMA handling */
-+#define DBG_REQ		0x0100	/* print out queued request length */
-+#define DBG_ALL		0xffff
-+#define DBG_NONE	0x0000
-+
-+#define DEBUG_LEVEL	(DBG_ERR)
-+#define DBG(level, fmt, ...)					\
-+	do {							\
-+		if ((level) & DEBUG_LEVEL)			\
-+			printk(KERN_DEBUG "udc: " fmt, ## __VA_ARGS__);	\
-+	} while (0)
-+#else
-+#define DBG(level, fmt...)
-+#endif
-+
-+enum usba_ctrl_state {
-+	WAIT_FOR_SETUP,
-+	DATA_STAGE_IN,
-+	DATA_STAGE_OUT,
-+	STATUS_STAGE_IN,
-+	STATUS_STAGE_OUT,
-+	STATUS_STAGE_ADDR,
-+	STATUS_STAGE_TEST,
-+};
-+/*
-+  EP_STATE_IDLE,
-+  EP_STATE_SETUP,
-+  EP_STATE_IN_DATA,
-+  EP_STATE_OUT_DATA,
-+  EP_STATE_SET_ADDR_STATUS,
-+  EP_STATE_RX_STATUS,
-+  EP_STATE_TX_STATUS,
-+  EP_STATE_HALT,
-+*/
-+
-+struct usba_dma_desc {
-+	dma_addr_t next;
-+	dma_addr_t addr;
-+	u32 ctrl;
-+};
-+
-+struct usba_ep {
-+	int					state;
-+	void __iomem				*ep_regs;
-+	void __iomem				*dma_regs;
-+	void __iomem				*fifo;
-+	struct usb_ep				ep;
-+	struct usba_udc				*udc;
-+
-+	struct list_head			queue;
-+	const struct usb_endpoint_descriptor	*desc;
-+
-+	u16					fifo_size;
-+	u8					nr_banks;
-+	u8					index;
-+	unsigned int				can_dma:1;
-+	unsigned int				can_isoc:1;
-+	unsigned int				is_isoc:1;
-+	unsigned int				is_in:1;
-+
-+#ifdef CONFIG_USB_GADGET_DEBUG_FS
-+	u32					last_dma_status;
-+	struct dentry				*debugfs_dir;
-+	struct dentry				*debugfs_queue;
-+	struct dentry				*debugfs_dma_status;
-+	struct dentry				*debugfs_state;
-+#endif
-+};
-+
-+struct usba_request {
-+	struct usb_request			req;
-+	struct list_head			queue;
+ #endif
+ 
+ static struct uart_driver atmel_uart = {
+-	.owner			= THIS_MODULE,
+-	.driver_name		= "atmel_serial",
+-	.dev_name		= ATMEL_DEVICENAME,
+-	.major			= SERIAL_ATMEL_MAJOR,
+-	.minor			= MINOR_START,
+-	.nr			= ATMEL_MAX_UART,
+-	.cons			= ATMEL_CONSOLE_DEVICE,
++	.owner		= THIS_MODULE,
++	.driver_name	= "atmel_serial",
++	.dev_name	= ATMEL_DEVICENAME,
++	.major		= SERIAL_ATMEL_MAJOR,
++	.minor		= MINOR_START,
++	.nr		= ATMEL_MAX_UART,
++	.cons		= ATMEL_CONSOLE_DEVICE,
+ };
+ 
+ #ifdef CONFIG_PM
+-static int atmel_serial_suspend(struct platform_device *pdev, pm_message_t state)
++static int atmel_serial_suspend(struct platform_device *pdev,
++				pm_message_t state)
+ {
+ 	struct uart_port *port = platform_get_drvdata(pdev);
+-	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ 
+-	if (device_may_wakeup(&pdev->dev) && !at91_suspend_entering_slow_clock())
++	if (device_may_wakeup(&pdev->dev)
++	    && !at91_suspend_entering_slow_clock())
+ 		enable_irq_wake(port->irq);
+ 	else {
+ 		uart_suspend_port(&atmel_uart, port);
+@@ -925,13 +1449,12 @@ static int atmel_serial_suspend(struct platform_device *pdev, pm_message_t state
+ static int atmel_serial_resume(struct platform_device *pdev)
+ {
+ 	struct uart_port *port = platform_get_drvdata(pdev);
+-	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ 
+ 	if (atmel_port->suspended) {
+ 		uart_resume_port(&atmel_uart, port);
+ 		atmel_port->suspended = 0;
+-	}
+-	else
++	} else
+ 		disable_irq_wake(port->irq);
+ 
+ 	return 0;
+@@ -944,15 +1467,40 @@ static int atmel_serial_resume(struct platform_device *pdev)
+ static int __devinit atmel_serial_probe(struct platform_device *pdev)
+ {
+ 	struct atmel_uart_port *port;
++	void *data;
+ 	int ret;
+ 
++	BUILD_BUG_ON(!is_power_of_2(ATMEL_SERIAL_RINGSIZE));
 +
-+	u32					ctrl;
+ 	port = &atmel_ports[pdev->id];
+ 	atmel_init_port(port, pdev);
+ 
++	if (!atmel_use_dma_rx(&port->uart)) {
++		ret = -ENOMEM;
++		data = kmalloc(sizeof(struct atmel_uart_char)
++				* ATMEL_SERIAL_RINGSIZE, GFP_KERNEL);
++		if (!data)
++			goto err_alloc_ring;
++		port->rx_ring.buf = data;
++	}
 +
-+	unsigned int				submitted:1;
-+	unsigned int				last_transaction:1;
-+	unsigned int				using_dma:1;
-+	unsigned int				mapped:1;
-+};
+ 	ret = uart_add_one_port(&atmel_uart, &port->uart);
+-	if (!ret) {
+-		device_init_wakeup(&pdev->dev, 1);
+-		platform_set_drvdata(pdev, port);
++	if (ret)
++		goto err_add_port;
 +
-+struct usba_udc {
-+	/* Protect hw registers from concurrent modifications */
-+	spinlock_t lock;
++	device_init_wakeup(&pdev->dev, 1);
++	platform_set_drvdata(pdev, port);
 +
-+	void __iomem *regs;
-+	void __iomem *fifo;
++	return 0;
 +
-+	struct usb_gadget gadget;
-+	struct usb_gadget_driver *driver;
-+	struct platform_device *pdev;
-+	int irq;
-+	int vbus_pin;
-+	struct clk *pclk;
-+	struct clk *hclk;
++err_add_port:
++	kfree(port->rx_ring.buf);
++	port->rx_ring.buf = NULL;
++err_alloc_ring:
++	if (!atmel_is_console_port(&port->uart)) {
++		clk_disable(port->clk);
++		clk_put(port->clk);
++		port->clk = NULL;
+ 	}
+ 
+ 	return ret;
+@@ -961,19 +1509,21 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev)
+ static int __devexit atmel_serial_remove(struct platform_device *pdev)
+ {
+ 	struct uart_port *port = platform_get_drvdata(pdev);
+-	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ 	int ret = 0;
+ 
+-	clk_disable(atmel_port->clk);
+-	clk_put(atmel_port->clk);
+-
+ 	device_init_wakeup(&pdev->dev, 0);
+ 	platform_set_drvdata(pdev, NULL);
+ 
+-	if (port) {
+-		ret = uart_remove_one_port(&atmel_uart, port);
+-		kfree(port);
+-	}
++	ret = uart_remove_one_port(&atmel_uart, port);
 +
-+	int test_mode;
-+	int vbus_prev;
++	tasklet_kill(&atmel_port->tasklet);
++	kfree(atmel_port->rx_ring.buf);
 +
-+#ifdef CONFIG_USB_GADGET_DEBUG_FS
-+	struct dentry *debugfs_root;
-+	struct dentry *debugfs_regs;
-+#endif
-+};
++	/* "port" is allocated statically, so we shouldn't free it */
 +
-+static inline struct usba_ep *to_usba_ep(struct usb_ep *ep)
++	clk_disable(atmel_port->clk);
++	clk_put(atmel_port->clk);
+ 
+ 	return ret;
+ }
+diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
+index ff10808..293b7ca 100644
+--- a/drivers/spi/atmel_spi.c
++++ b/drivers/spi/atmel_spi.c
+@@ -51,7 +51,9 @@ struct atmel_spi {
+ 	u8			stopping;
+ 	struct list_head	queue;
+ 	struct spi_transfer	*current_transfer;
+-	unsigned long		remaining_bytes;
++	unsigned long		current_remaining_bytes;
++	struct spi_transfer	*next_transfer;
++	unsigned long		next_remaining_bytes;
+ 
+ 	void			*buffer;
+ 	dma_addr_t		buffer_dma;
+@@ -121,6 +123,48 @@ static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi)
+ 		gpio_set_value(gpio, !active);
+ }
+ 
++static inline int atmel_spi_xfer_is_last(struct spi_message *msg,
++					struct spi_transfer *xfer)
 +{
-+	return container_of(ep, struct usba_ep, ep);
++	return msg->transfers.prev == &xfer->transfer_list;
 +}
 +
-+static inline struct usba_request *to_usba_req(struct usb_request *req)
++static inline int atmel_spi_xfer_can_be_chained(struct spi_transfer *xfer)
 +{
-+	return container_of(req, struct usba_request, req);
++	return xfer->delay_usecs == 0 && !xfer->cs_change;
 +}
 +
-+static inline struct usba_udc *to_usba_udc(struct usb_gadget *gadget)
++static void atmel_spi_next_xfer_data(struct spi_master *master,
++				struct spi_transfer *xfer,
++				dma_addr_t *tx_dma,
++				dma_addr_t *rx_dma,
++				u32 *plen)
 +{
-+	return container_of(gadget, struct usba_udc, gadget);
++	struct atmel_spi	*as = spi_master_get_devdata(master);
++	u32			len = *plen;
++
++	/* use scratch buffer only when rx or tx data is unspecified */
++	if (xfer->rx_buf)
++		*rx_dma = xfer->rx_dma + xfer->len - len;
++	else {
++		*rx_dma = as->buffer_dma;
++		if (len > BUFFER_SIZE)
++			len = BUFFER_SIZE;
++	}
++	if (xfer->tx_buf)
++		*tx_dma = xfer->tx_dma + xfer->len - len;
++	else {
++		*tx_dma = as->buffer_dma;
++		if (len > BUFFER_SIZE)
++			len = BUFFER_SIZE;
++		memset(as->buffer, 0, len);
++		dma_sync_single_for_device(&as->pdev->dev,
++				as->buffer_dma, len, DMA_TO_DEVICE);
++	}
++
++	*plen = len;
 +}
 +
-+#define ep_is_control(ep)	((ep)->index == 0)
-+#define ep_is_idle(ep)		((ep)->state == EP_STATE_IDLE)
+ /*
+  * Submit next transfer for DMA.
+  * lock is held, spi irq is blocked
+@@ -130,53 +174,78 @@ static void atmel_spi_next_xfer(struct spi_master *master,
+ {
+ 	struct atmel_spi	*as = spi_master_get_devdata(master);
+ 	struct spi_transfer	*xfer;
+-	u32			len;
++	u32			len, remaining, total;
+ 	dma_addr_t		tx_dma, rx_dma;
+ 
+-	xfer = as->current_transfer;
+-	if (!xfer || as->remaining_bytes == 0) {
+-		if (xfer)
+-			xfer = list_entry(xfer->transfer_list.next,
+-					struct spi_transfer, transfer_list);
+-		else
+-			xfer = list_entry(msg->transfers.next,
+-					struct spi_transfer, transfer_list);
+-		as->remaining_bytes = xfer->len;
+-		as->current_transfer = xfer;
+-	}
++	if (!as->current_transfer)
++		xfer = list_entry(msg->transfers.next,
++				struct spi_transfer, transfer_list);
++	else if (!as->next_transfer)
++		xfer = list_entry(as->current_transfer->transfer_list.next,
++				struct spi_transfer, transfer_list);
++	else
++		xfer = NULL;
+ 
+-	len = as->remaining_bytes;
++	if (xfer) {
++		len = xfer->len;
++		atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
++		remaining = xfer->len - len;
+ 
+-	tx_dma = xfer->tx_dma + xfer->len - len;
+-	rx_dma = xfer->rx_dma + xfer->len - len;
++		spi_writel(as, RPR, rx_dma);
++		spi_writel(as, TPR, tx_dma);
+ 
+-	/* use scratch buffer only when rx or tx data is unspecified */
+-	if (!xfer->rx_buf) {
+-		rx_dma = as->buffer_dma;
+-		if (len > BUFFER_SIZE)
+-			len = BUFFER_SIZE;
+-	}
+-	if (!xfer->tx_buf) {
+-		tx_dma = as->buffer_dma;
+-		if (len > BUFFER_SIZE)
+-			len = BUFFER_SIZE;
+-		memset(as->buffer, 0, len);
+-		dma_sync_single_for_device(&as->pdev->dev,
+-				as->buffer_dma, len, DMA_TO_DEVICE);
++		if (msg->spi->bits_per_word > 8)
++			len >>= 1;
++		spi_writel(as, RCR, len);
++		spi_writel(as, TCR, len);
++
++		dev_dbg(&msg->spi->dev,
++			"  start xfer %p: len %u tx %p/%08x rx %p/%08x\n",
++			xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
++			xfer->rx_buf, xfer->rx_dma);
++	} else {
++		xfer = as->next_transfer;
++		remaining = as->next_remaining_bytes;
+ 	}
+ 
+-	spi_writel(as, RPR, rx_dma);
+-	spi_writel(as, TPR, tx_dma);
++	as->current_transfer = xfer;
++	as->current_remaining_bytes = remaining;
+ 
+-	as->remaining_bytes -= len;
+-	if (msg->spi->bits_per_word > 8)
+-		len >>= 1;
++	if (remaining > 0)
++		len = remaining;
++	else if (!atmel_spi_xfer_is_last(msg, xfer)
++			&& atmel_spi_xfer_can_be_chained(xfer)) {
++		xfer = list_entry(xfer->transfer_list.next,
++				struct spi_transfer, transfer_list);
++		len = xfer->len;
++	} else
++		xfer = NULL;
+ 
+-	/* REVISIT: when xfer->delay_usecs == 0, the PDC "next transfer"
+-	 * mechanism might help avoid the IRQ latency between transfers
+-	 * (and improve the nCS0 errata handling on at91rm9200 chips)
+-	 *
+-	 * We're also waiting for ENDRX before we start the next
++	as->next_transfer = xfer;
++
++	if (xfer) {
++		total = len;
++		atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
++		as->next_remaining_bytes = total - len;
++
++		spi_writel(as, RNPR, rx_dma);
++		spi_writel(as, TNPR, tx_dma);
++
++		if (msg->spi->bits_per_word > 8)
++			len >>= 1;
++		spi_writel(as, RNCR, len);
++		spi_writel(as, TNCR, len);
++
++		dev_dbg(&msg->spi->dev,
++			"  next xfer %p: len %u tx %p/%08x rx %p/%08x\n",
++			xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
++			xfer->rx_buf, xfer->rx_dma);
++	} else {
++		spi_writel(as, RNCR, 0);
++		spi_writel(as, TNCR, 0);
++	}
 +
-+#endif /* __LINUX_USB_GADGET_USBA_UDC_H */
++	/* REVISIT: We're waiting for ENDRX before we start the next
+ 	 * transfer because we need to handle some difficult timing
+ 	 * issues otherwise. If we wait for ENDTX in one transfer and
+ 	 * then starts waiting for ENDRX in the next, it's difficult
+@@ -186,17 +255,7 @@ static void atmel_spi_next_xfer(struct spi_master *master,
+ 	 *
+ 	 * It should be doable, though. Just not now...
+ 	 */
+-	spi_writel(as, TNCR, 0);
+-	spi_writel(as, RNCR, 0);
+ 	spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES));
+-
+-	dev_dbg(&msg->spi->dev,
+-		"  start xfer %p: len %u tx %p/%08x rx %p/%08x imr %03x\n",
+-		xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
+-		xfer->rx_buf, xfer->rx_dma, spi_readl(as, IMR));
+-
+-	spi_writel(as, RCR, len);
+-	spi_writel(as, TCR, len);
+ 	spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
+ }
+ 
+@@ -294,6 +353,7 @@ atmel_spi_msg_done(struct spi_master *master, struct atmel_spi *as,
+ 	spin_lock(&as->lock);
+ 
+ 	as->current_transfer = NULL;
++	as->next_transfer = NULL;
+ 
+ 	/* continue if needed */
+ 	if (list_empty(&as->queue) || as->stopping)
+@@ -377,7 +437,7 @@ atmel_spi_interrupt(int irq, void *dev_id)
+ 
+ 		spi_writel(as, IDR, pending);
+ 
+-		if (as->remaining_bytes == 0) {
++		if (as->current_remaining_bytes == 0) {
+ 			msg->actual_length += xfer->len;
+ 
+ 			if (!msg->is_dma_mapped)
+@@ -387,7 +447,7 @@ atmel_spi_interrupt(int irq, void *dev_id)
+ 			if (xfer->delay_usecs)
+ 				udelay(xfer->delay_usecs);
+ 
+-			if (msg->transfers.prev == &xfer->transfer_list) {
++			if (atmel_spi_xfer_is_last(msg, xfer)) {
+ 				/* report completed message */
+ 				atmel_spi_msg_done(master, as, msg, 0,
+ 						xfer->cs_change);
+@@ -490,9 +550,14 @@ static int atmel_spi_setup(struct spi_device *spi)
+ 	if (!(spi->mode & SPI_CPHA))
+ 		csr |= SPI_BIT(NCPHA);
+ 
+-	/* TODO: DLYBS and DLYBCT */
+-	csr |= SPI_BF(DLYBS, 10);
+-	csr |= SPI_BF(DLYBCT, 10);
++	/* DLYBS is mostly irrelevant since we manage chipselect using GPIOs.
++	 *
++	 * DLYBCT would add delays between words, slowing down transfers.
++	 * It could potentially be useful to cope with DMA bottlenecks, but
++	 * in those cases it's probably best to just use a lower bitrate.
++	 */
++	csr |= SPI_BF(DLYBS, 0);
++	csr |= SPI_BF(DLYBCT, 0);
+ 
+ 	/* chipselect must have been muxed as GPIO (e.g. in board setup) */
+ 	npcs_pin = (unsigned int)spi->controller_data;
 diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
-index 235b618..bb361ab 100644
+index 7c30cc8..5e99671 100644
 --- a/drivers/video/atmel_lcdfb.c
 +++ b/drivers/video/atmel_lcdfb.c
-@@ -37,7 +37,9 @@
+@@ -16,6 +16,7 @@
+ #include <linux/fb.h>
+ #include <linux/init.h>
+ #include <linux/delay.h>
++#include <linux/backlight.h>
+ 
+ #include <asm/arch/board.h>
+ #include <asm/arch/cpu.h>
+@@ -37,7 +38,9 @@
  #endif
  
  #if defined(CONFIG_ARCH_AT91)
@@ -8729,515 +16095,383 @@ index 235b618..bb361ab 100644
  
  static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
  					struct fb_var_screeninfo *var)
-@@ -74,7 +76,7 @@ static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
- 	.type		= FB_TYPE_PACKED_PIXELS,
- 	.visual		= FB_VISUAL_TRUECOLOR,
- 	.xpanstep	= 0,
--	.ypanstep	= 0,
-+	.ypanstep	= 1,
- 	.ywrapstep	= 0,
- 	.accel		= FB_ACCEL_NONE,
- };
-diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
-index 2580f5f..b6f936a 100644
---- a/drivers/video/backlight/Kconfig
-+++ b/drivers/video/backlight/Kconfig
-@@ -24,6 +24,18 @@ config LCD_CLASS_DEVICE
- 	  To have support for your specific LCD panel you will have to
- 	  select the proper drivers which depend on this option.
- 
-+config LCD_LTV350QV
-+	tristate "Samsung LTV350QV LCD Panel"
-+	depends on LCD_CLASS_DEVICE && SPI_MASTER
-+	default n
-+	help
-+	  If you have a Samsung LTV350QV LCD panel, say y to include a
-+	  power control driver for it.  The panel starts up in power
-+	  off state, so you need this driver in order to see any
-+	  output.
-+
-+	  The LTV350QV panel is present on all ATSTK1000 boards.
-+
- #
- # Backlight
- #
-diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
-index c6e2266..965a78b 100644
---- a/drivers/video/backlight/Makefile
-+++ b/drivers/video/backlight/Makefile
-@@ -1,6 +1,8 @@
- # Backlight & LCD drivers
+@@ -69,12 +72,113 @@ static void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
+ }
+ #endif
  
- obj-$(CONFIG_LCD_CLASS_DEVICE)     += lcd.o
-+obj-$(CONFIG_LCD_LTV350QV)	+= ltv350qv.o
++static const u32 contrast_ctr = ATMEL_LCDC_PS_DIV8
++		| ATMEL_LCDC_POL_POSITIVE
++		| ATMEL_LCDC_ENA_PWMENABLE;
 +
- obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
- obj-$(CONFIG_BACKLIGHT_CORGI)	+= corgi_bl.o
- obj-$(CONFIG_BACKLIGHT_HP680)	+= hp680_bl.o
-diff --git a/drivers/video/backlight/ltv350qv.c b/drivers/video/backlight/ltv350qv.c
-new file mode 100644
-index 0000000..751dc53
---- /dev/null
-+++ b/drivers/video/backlight/ltv350qv.c
-@@ -0,0 +1,339 @@
-+/*
-+ * Power control for Samsung LTV350QV Quarter VGA LCD Panel
-+ *
-+ * Copyright (C) 2006, 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/lcd.h>
-+#include <linux/module.h>
-+#include <linux/spi/spi.h>
-+
-+#include "ltv350qv.h"
-+
-+#define POWER_IS_ON(pwr)	((pwr) <= FB_BLANK_NORMAL)
-+
-+struct ltv350qv {
-+	struct spi_device	*spi;
-+	u8			*buffer;
-+	int			power;
-+	struct lcd_device	*ld;
-+};
-+
-+/*
-+ * The power-on and power-off sequences are taken from the
-+ * LTV350QV-F04 data sheet from Samsung. The register definitions are
-+ * taken from the S6F2002 command list also from Samsung. Both
-+ * documents are distributed with the AVR32 Linux BSP CD from Atmel.
-+ *
-+ * There's still some voodoo going on here, but it's a lot better than
-+ * in the first incarnation of the driver where all we had was the raw
-+ * numbers from the initialization sequence.
-+ */
-+static int ltv350qv_write_reg(struct ltv350qv *lcd, u8 reg, u16 val)
-+{
-+	struct spi_message msg;
-+	struct spi_transfer index_xfer = {
-+		.len		= 3,
-+		.cs_change	= 1,
-+	};
-+	struct spi_transfer value_xfer = {
-+		.len		= 3,
-+	};
-+
-+	spi_message_init(&msg);
-+
-+	/* register index */
-+	lcd->buffer[0] = LTV_OPC_INDEX;
-+	lcd->buffer[1] = 0x00;
-+	lcd->buffer[2] = reg & 0x7f;
-+	index_xfer.tx_buf = lcd->buffer;
-+	spi_message_add_tail(&index_xfer, &msg);
-+
-+	/* register value */
-+	lcd->buffer[4] = LTV_OPC_DATA;
-+	lcd->buffer[5] = val >> 8;
-+	lcd->buffer[6] = val;
-+	value_xfer.tx_buf = lcd->buffer + 4;
-+	spi_message_add_tail(&value_xfer, &msg);
-+
-+	return spi_sync(lcd->spi, &msg);
-+}
++#ifdef CONFIG_BACKLIGHT_ATMEL_LCDC
 +
-+/* The comments are taken straight from the data sheet */
-+static int ltv350qv_power_on(struct ltv350qv *lcd)
++/* some bl->props field just changed */
++static int atmel_bl_update_status(struct backlight_device *bl)
 +{
-+	int ret;
-+
-+	/* Power On Reset Display off State */
-+	if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, 0x0000))
-+		goto err;
-+	msleep(15);
-+
-+	/* Power Setting Function 1 */
-+	if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE))
-+		goto err;
-+	if (ltv350qv_write_reg(lcd, LTV_PWRCTL2, LTV_VCOML_ENABLE))
-+		goto err_power1;
-+
-+	/* Power Setting Function 2 */
-+	if (ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+			       LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5)
-+			       | LTV_SUPPLY_CURRENT(5)))
-+		goto err_power2;
-+
-+	msleep(55);
-+
-+	/* Instruction Setting */
-+	ret = ltv350qv_write_reg(lcd, LTV_IFCTL,
-+				 LTV_NMD | LTV_REV | LTV_NL(0x1d));
-+	ret |= ltv350qv_write_reg(lcd, LTV_DATACTL,
-+				  LTV_DS_SAME | LTV_CHS_480
-+				  | LTV_DF_RGB | LTV_RGB_BGR);
-+	ret |= ltv350qv_write_reg(lcd, LTV_ENTRY_MODE,
-+				  LTV_VSPL_ACTIVE_LOW
-+				  | LTV_HSPL_ACTIVE_LOW
-+				  | LTV_DPL_SAMPLE_RISING
-+				  | LTV_EPL_ACTIVE_LOW
-+				  | LTV_SS_RIGHT_TO_LEFT);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GATECTL1, LTV_CLW(3));
-+	ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+				  LTV_NW_INV_1LINE | LTV_FWI(3));
-+	ret |= ltv350qv_write_reg(lcd, LTV_VBP, 0x000a);
-+	ret |= ltv350qv_write_reg(lcd, LTV_HBP, 0x0021);
-+	ret |= ltv350qv_write_reg(lcd, LTV_SOTCTL, LTV_SDT(3) | LTV_EQ(0));
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(0), 0x0103);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(1), 0x0301);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(2), 0x1f0f);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(3), 0x1f0f);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(4), 0x0707);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(5), 0x0307);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(6), 0x0707);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(7), 0x0000);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(8), 0x0004);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(9), 0x0000);
-+	if (ret)
-+		goto err_settings;
-+
-+	/* Wait more than 2 frames */
-+	msleep(20);
-+
-+	/* Display On Sequence */
-+	ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+				 LTV_VCOM_DISABLE | LTV_VCOMOUT_ENABLE
-+				 | LTV_POWER_ON | LTV_DRIVE_CURRENT(5)
-+				 | LTV_SUPPLY_CURRENT(5));
-+	ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+				  LTV_NW_INV_1LINE | LTV_DSC | LTV_FWI(3));
-+	if (ret)
-+		goto err_disp_on;
-+
-+	/* Display should now be ON. Phew. */
-+	return 0;
++	struct atmel_lcdfb_info *sinfo = bl_get_data(bl);
++	int			power = sinfo->bl_power;
++	int			brightness = bl->props.brightness;
 +
-+err_disp_on:
-+	/*
-+	 * Try to recover. Error handling probably isn't very useful
-+	 * at this point, just make a best effort to switch the panel
-+	 * off.
++	/* REVISIT there may be a meaningful difference between
++	 * fb_blank and power ... there seem to be some cases
++	 * this doesn't handle correctly.
 +	 */
-+	ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+			   LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5)
-+			   | LTV_SUPPLY_CURRENT(5));
-+	ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+			   LTV_NW_INV_1LINE | LTV_FWI(3));
-+err_settings:
-+err_power2:
-+err_power1:
-+	ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
-+	msleep(1);
-+err:
-+	ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
-+	return -EIO;
-+}
++	if (bl->props.fb_blank != sinfo->bl_power)
++		power = bl->props.fb_blank;
++	else if (bl->props.power != sinfo->bl_power)
++		power = bl->props.power;
 +
-+static int ltv350qv_power_off(struct ltv350qv *lcd)
-+{
-+	int ret;
-+
-+	/* Display Off Sequence */
-+	ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+				 LTV_VCOM_DISABLE
-+				 | LTV_DRIVE_CURRENT(5)
-+				 | LTV_SUPPLY_CURRENT(5));
-+	ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+				  LTV_NW_INV_1LINE | LTV_FWI(3));
-+
-+	/* Power down setting 1 */
-+	ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
++	if (brightness < 0 && power == FB_BLANK_UNBLANK)
++		brightness = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
++	else if (power != FB_BLANK_UNBLANK)
++		brightness = 0;
 +
-+	/* Wait at least 1 ms */
-+	msleep(1);
++	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, brightness);
++	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR,
++			brightness ? contrast_ctr : 0);
 +
-+	/* Power down setting 2 */
-+	ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
++	bl->props.fb_blank = bl->props.power = sinfo->bl_power = power;
 +
-+	/*
-+	 * No point in trying to recover here. If we can't switch the
-+	 * panel off, what are we supposed to do other than inform the
-+	 * user about the failure?
-+	 */
-+	if (ret)
-+		return -EIO;
-+
-+	/* Display power should now be OFF */
 +	return 0;
 +}
 +
-+static int ltv350qv_power(struct ltv350qv *lcd, int power)
-+{
-+	int ret = 0;
-+
-+	if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
-+		ret = ltv350qv_power_on(lcd);
-+	else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
-+		ret = ltv350qv_power_off(lcd);
-+
-+	if (!ret)
-+		lcd->power = power;
-+
-+	return ret;
-+}
-+
-+static int ltv350qv_set_power(struct lcd_device *ld, int power)
++static int atmel_bl_get_brightness(struct backlight_device *bl)
 +{
-+	struct ltv350qv *lcd;
++	struct atmel_lcdfb_info *sinfo = bl_get_data(bl);
 +
-+	lcd = lcd_get_data(ld);
-+	return ltv350qv_power(lcd, power);
++	return lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
 +}
 +
-+static int ltv350qv_get_power(struct lcd_device *ld)
-+{
-+	struct ltv350qv *lcd;
-+
-+	lcd = lcd_get_data(ld);
-+	return lcd->power;
-+}
-+
-+static struct lcd_ops ltv_ops = {
-+	.get_power	= ltv350qv_get_power,
-+	.set_power	= ltv350qv_set_power,
++static struct backlight_ops atmel_lcdc_bl_ops = {
++	.update_status = atmel_bl_update_status,
++	.get_brightness = atmel_bl_get_brightness,
 +};
 +
-+static int __devinit ltv350qv_probe(struct spi_device *spi)
++static void init_backlight(struct atmel_lcdfb_info *sinfo)
 +{
-+	struct ltv350qv *lcd;
-+	struct lcd_device *ld;
-+	int ret;
++	struct backlight_device	*bl;
 +
-+	lcd = kzalloc(sizeof(struct ltv350qv), GFP_KERNEL);
-+	if (!lcd)
-+		return -ENOMEM;
++	sinfo->bl_power = FB_BLANK_UNBLANK;
 +
-+	lcd->spi = spi;
-+	lcd->power = FB_BLANK_POWERDOWN;
-+	lcd->buffer = kzalloc(8, GFP_KERNEL);
++	if (sinfo->backlight)
++		return;
 +
-+	ld = lcd_device_register("ltv350qv", &spi->dev, lcd, &ltv_ops);
-+	if (IS_ERR(ld)) {
-+		ret = PTR_ERR(ld);
-+		goto out_free_lcd;
++	bl = backlight_device_register("backlight", &sinfo->pdev->dev,
++			sinfo, &atmel_lcdc_bl_ops);
++	if (IS_ERR(sinfo->backlight)) {
++		dev_err(&sinfo->pdev->dev, "error %ld on backlight register\n",
++				PTR_ERR(bl));
++		return;
 +	}
-+	lcd->ld = ld;
-+
-+	ret = ltv350qv_power(lcd, FB_BLANK_UNBLANK);
-+	if (ret)
-+		goto out_unregister;
++	sinfo->backlight = bl;
 +
-+	dev_set_drvdata(&spi->dev, lcd);
-+
-+	return 0;
-+
-+out_unregister:
-+	lcd_device_unregister(ld);
-+out_free_lcd:
-+	kfree(lcd);
-+	return ret;
++	bl->props.power = FB_BLANK_UNBLANK;
++	bl->props.fb_blank = FB_BLANK_UNBLANK;
++	bl->props.max_brightness = 0xff;
++	bl->props.brightness = atmel_bl_get_brightness(bl);
 +}
 +
-+static int __devexit ltv350qv_remove(struct spi_device *spi)
++static void exit_backlight(struct atmel_lcdfb_info *sinfo)
 +{
-+	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
-+
-+	ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
-+	lcd_device_unregister(lcd->ld);
-+	kfree(lcd);
-+
-+	return 0;
++	if (sinfo->backlight)
++		backlight_device_unregister(sinfo->backlight);
 +}
 +
-+#ifdef CONFIG_PM
-+static int ltv350qv_suspend(struct spi_device *spi,
-+			    pm_message_t state, u32 level)
-+{
-+	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
-+
-+	if (level == SUSPEND_POWER_DOWN)
-+		return ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
++#else
 +
-+	return 0;
++static void init_backlight(struct atmel_lcdfb_info *sinfo)
++{
++	dev_warn(&sinfo->pdev->dev, "backlight control is not available\n");
 +}
 +
-+static int ltv350qv_resume(struct spi_device *spi, u32 level)
++static void exit_backlight(struct atmel_lcdfb_info *sinfo)
 +{
-+	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
-+
-+	if (level == RESUME_POWER_ON)
-+		return ltv350qv_power(lcd, FB_BLANK_UNBLANK);
-+
-+	return 0;
 +}
-+#else
-+#define ltv350qv_suspend	NULL
-+#define ltv350qv_resume		NULL
++
 +#endif
 +
-+/* Power down all displays on reboot, poweroff or halt */
-+static void ltv350qv_shutdown(struct spi_device *spi)
++static void init_contrast(struct atmel_lcdfb_info *sinfo)
 +{
-+	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++	/* have some default contrast/backlight settings */
++	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr);
++	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
 +
-+	ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
++	if (sinfo->lcdcon_is_backlight)
++		init_backlight(sinfo);
 +}
 +
-+static struct spi_driver ltv350qv_driver = {
-+	.driver = {
-+		.name		= "ltv350qv",
-+		.bus		= &spi_bus_type,
-+		.owner		= THIS_MODULE,
-+	},
+ 
+ static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
+ 	.type		= FB_TYPE_PACKED_PIXELS,
+ 	.visual		= FB_VISUAL_TRUECOLOR,
+ 	.xpanstep	= 0,
+-	.ypanstep	= 0,
++	.ypanstep	= 1,
+ 	.ywrapstep	= 0,
+ 	.accel		= FB_ACCEL_NONE,
+ };
+@@ -148,6 +252,8 @@ static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
+ 		return -ENOMEM;
+ 	}
+ 
++	memset(info->screen_base, 0, info->fix.smem_len);
 +
-+	.probe		= ltv350qv_probe,
-+	.remove		= __devexit_p(ltv350qv_remove),
-+	.shutdown	= ltv350qv_shutdown,
-+	.suspend	= ltv350qv_suspend,
-+	.resume		= ltv350qv_resume,
-+};
+ 	return 0;
+ }
+ 
+@@ -203,6 +309,26 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
+ 	var->transp.offset = var->transp.length = 0;
+ 	var->xoffset = var->yoffset = 0;
+ 
++	/* Saturate vertical and horizontal timings at maximum values */
++	var->vsync_len = min_t(u32, var->vsync_len,
++			(ATMEL_LCDC_VPW >> ATMEL_LCDC_VPW_OFFSET) + 1);
++	var->upper_margin = min_t(u32, var->upper_margin,
++			ATMEL_LCDC_VBP >> ATMEL_LCDC_VBP_OFFSET);
++	var->lower_margin = min_t(u32, var->lower_margin,
++			ATMEL_LCDC_VFP);
++	var->right_margin = min_t(u32, var->right_margin,
++			(ATMEL_LCDC_HFP >> ATMEL_LCDC_HFP_OFFSET) + 1);
++	var->hsync_len = min_t(u32, var->hsync_len,
++			(ATMEL_LCDC_HPW >> ATMEL_LCDC_HPW_OFFSET) + 1);
++	var->left_margin = min_t(u32, var->left_margin,
++			ATMEL_LCDC_HBP + 1);
++
++	/* Some parameters can't be zero */
++	var->vsync_len = max_t(u32, var->vsync_len, 1);
++	var->right_margin = max_t(u32, var->right_margin, 1);
++	var->hsync_len = max_t(u32, var->hsync_len, 1);
++	var->left_margin = max_t(u32, var->left_margin, 1);
++
+ 	switch (var->bits_per_pixel) {
+ 	case 1:
+ 	case 2:
+@@ -370,10 +496,6 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
+ 	/* Disable all interrupts */
+ 	lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
+ 
+-	/* Set contrast */
+-	value = ATMEL_LCDC_PS_DIV8 | ATMEL_LCDC_POL_POSITIVE | ATMEL_LCDC_ENA_PWMENABLE;
+-	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, value);
+-	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
+ 	/* ...wait for DMA engine to become idle... */
+ 	while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
+ 		msleep(10);
+@@ -516,7 +638,6 @@ static int __init atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo)
+ 	struct fb_info *info = sinfo->info;
+ 	int ret = 0;
+ 
+-	memset_io(info->screen_base, 0, info->fix.smem_len);
+ 	info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
+ 
+ 	dev_info(info->device,
+@@ -577,6 +698,7 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
+ 		sinfo->default_monspecs = pdata_sinfo->default_monspecs;
+ 		sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
+ 		sinfo->guard_time = pdata_sinfo->guard_time;
++		sinfo->lcdcon_is_backlight = pdata_sinfo->lcdcon_is_backlight;
+ 	} else {
+ 		dev_err(dev, "cannot get default configuration\n");
+ 		goto free_info;
+@@ -645,6 +767,11 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
+ 		info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
+ 		if (!info->screen_base)
+ 			goto release_intmem;
 +
-+static int __init ltv350qv_init(void)
-+{
-+	return spi_register_driver(&ltv350qv_driver);
-+}
++		/*
++		 * Don't clear the framebuffer -- someone may have set
++		 * up a splash image.
++		 */
+ 	} else {
+ 		/* alocate memory buffer */
+ 		ret = atmel_lcdfb_alloc_video_memory(sinfo);
+@@ -670,6 +797,9 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
+ 		goto release_mem;
+ 	}
+ 
++	/* Initialize PWM for contrast or backlight ("off") */
++	init_contrast(sinfo);
++
+ 	/* interrupt */
+ 	ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info);
+ 	if (ret) {
+@@ -721,6 +851,7 @@ free_cmap:
+ unregister_irqs:
+ 	free_irq(sinfo->irq_base, info);
+ unmap_mmio:
++	exit_backlight(sinfo);
+ 	iounmap(sinfo->mmio);
+ release_mem:
+  	release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
+@@ -755,6 +886,7 @@ static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
+ 	if (!sinfo)
+ 		return 0;
+ 
++	exit_backlight(sinfo);
+ 	if (sinfo->atmel_lcdfb_power_control)
+ 		sinfo->atmel_lcdfb_power_control(0);
+ 	unregister_framebuffer(info);
+@@ -781,6 +913,9 @@ static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
+ 
+ static struct platform_driver atmel_lcdfb_driver = {
+ 	.remove		= __exit_p(atmel_lcdfb_remove),
 +
-+static void __exit ltv350qv_exit(void)
-+{
-+	spi_unregister_driver(&ltv350qv_driver);
-+}
-+module_init(ltv350qv_init);
-+module_exit(ltv350qv_exit);
++// FIXME need suspend, resume
 +
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_DESCRIPTION("Samsung LTV350QV LCD Driver");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/video/backlight/ltv350qv.h b/drivers/video/backlight/ltv350qv.h
+ 	.driver		= {
+ 		.name	= "atmel_lcdfb",
+ 		.owner	= THIS_MODULE,
+diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
+index 9609a6c..924e255 100644
+--- a/drivers/video/backlight/Kconfig
++++ b/drivers/video/backlight/Kconfig
+@@ -50,6 +50,19 @@ config BACKLIGHT_CLASS_DEVICE
+ 	  To have support for your specific LCD panel you will have to
+ 	  select the proper drivers which depend on this option.
+ 
++config BACKLIGHT_ATMEL_LCDC
++	bool "Atmel LCDC Contrast-as-Backlight control"
++	depends on BACKLIGHT_CLASS_DEVICE && FB_ATMEL
++	default y if MACH_SAM9261EK || MACH_SAM9263EK
++	help
++	  This provides a backlight control internal to the Atmel LCDC
++	  driver.  If the LCD "contrast control" on your board is wired
++	  so it controls the backlight brightness, select this option to
++	  export this as a PWM-based backlight control.
++
++	  If in doubt, it's safe to enable this option; it doesn't kick
++	  in unless the board's description says it's wired that way.
++
+ config BACKLIGHT_CORGI
+ 	tristate "Generic (aka Sharp Corgi) Backlight Driver"
+ 	depends on BACKLIGHT_CLASS_DEVICE
+diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
+index b87ed37..2b53d1f 100644
+--- a/drivers/video/console/Kconfig
++++ b/drivers/video/console/Kconfig
+@@ -6,7 +6,7 @@ menu "Console display driver support"
+ 
+ config VGA_CONSOLE
+ 	bool "VGA text console" if EMBEDDED || !X86
+-	depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN
++	depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN && !AVR32
+ 	default y
+ 	help
+ 	  Saying Y here will allow you to use Linux in text mode through a
+diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
+index 52dff40..fbd6112 100644
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -223,7 +223,7 @@ config DAVINCI_WATCHDOG
+ 
+ config AT32AP700X_WDT
+ 	tristate "AT32AP700x watchdog"
+-	depends on CPU_AT32AP7000
++	depends on CPU_AT32AP700X
+ 	help
+ 	  Watchdog timer embedded into AT32AP700x devices. This will reboot
+ 	  your system when the timeout is reached.
+diff --git a/include/asm-avr32/arch-at32ap/at32ap7000.h b/include/asm-avr32/arch-at32ap/at32ap7000.h
+deleted file mode 100644
+index 3914d7b..0000000
+--- a/include/asm-avr32/arch-at32ap/at32ap7000.h
++++ /dev/null
+@@ -1,35 +0,0 @@
+-/*
+- * Pin definitions for AT32AP7000.
+- *
+- * Copyright (C) 2006 Atmel Corporation
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- */
+-#ifndef __ASM_ARCH_AT32AP7000_H__
+-#define __ASM_ARCH_AT32AP7000_H__
+-
+-#define GPIO_PERIPH_A	0
+-#define GPIO_PERIPH_B	1
+-
+-#define NR_GPIO_CONTROLLERS	4
+-
+-/*
+- * Pin numbers identifying specific GPIO pins on the chip. They can
+- * also be converted to IRQ numbers by passing them through
+- * gpio_to_irq().
+- */
+-#define GPIO_PIOA_BASE	(0)
+-#define GPIO_PIOB_BASE	(GPIO_PIOA_BASE + 32)
+-#define GPIO_PIOC_BASE	(GPIO_PIOB_BASE + 32)
+-#define GPIO_PIOD_BASE	(GPIO_PIOC_BASE + 32)
+-#define GPIO_PIOE_BASE	(GPIO_PIOD_BASE + 32)
+-
+-#define GPIO_PIN_PA(N)	(GPIO_PIOA_BASE + (N))
+-#define GPIO_PIN_PB(N)	(GPIO_PIOB_BASE + (N))
+-#define GPIO_PIN_PC(N)	(GPIO_PIOC_BASE + (N))
+-#define GPIO_PIN_PD(N)	(GPIO_PIOD_BASE + (N))
+-#define GPIO_PIN_PE(N)	(GPIO_PIOE_BASE + (N))
+-
+-#endif /* __ASM_ARCH_AT32AP7000_H__ */
+diff --git a/include/asm-avr32/arch-at32ap/at32ap700x.h b/include/asm-avr32/arch-at32ap/at32ap700x.h
 new file mode 100644
-index 0000000..189112e
+index 0000000..99684d6
 --- /dev/null
-+++ b/drivers/video/backlight/ltv350qv.h
-@@ -0,0 +1,95 @@
++++ b/include/asm-avr32/arch-at32ap/at32ap700x.h
+@@ -0,0 +1,35 @@
 +/*
-+ * Register definitions for Samsung LTV350QV Quarter VGA LCD Panel
++ * Pin definitions for AT32AP7000.
 + *
-+ * Copyright (C) 2006, 2007 Atmel Corporation
++ * Copyright (C) 2006 Atmel Corporation
 + *
 + * This program is free software; you can redistribute it and/or modify
 + * it under the terms of the GNU General Public License version 2 as
 + * published by the Free Software Foundation.
 + */
-+#ifndef __LTV350QV_H
-+#define __LTV350QV_H
-+
-+#define LTV_OPC_INDEX	0x74
-+#define LTV_OPC_DATA	0x76
-+
-+#define LTV_ID		0x00		/* ID Read */
-+#define LTV_IFCTL	0x01		/* Display Interface Control */
-+#define LTV_DATACTL	0x02		/* Display Data Control */
-+#define LTV_ENTRY_MODE	0x03		/* Entry Mode */
-+#define LTV_GATECTL1	0x04		/* Gate Control 1 */
-+#define LTV_GATECTL2	0x05		/* Gate Control 2 */
-+#define LTV_VBP		0x06		/* Vertical Back Porch */
-+#define LTV_HBP		0x07		/* Horizontal Back Porch */
-+#define LTV_SOTCTL	0x08		/* Source Output Timing Control */
-+#define LTV_PWRCTL1	0x09		/* Power Control 1 */
-+#define LTV_PWRCTL2	0x0a		/* Power Control 2 */
-+#define LTV_GAMMA(x)	(0x10 + (x))	/* Gamma control */
-+
-+/* Bit definitions for LTV_IFCTL */
-+#define LTV_IM			(1 << 15)
-+#define LTV_NMD			(1 << 14)
-+#define LTV_SSMD		(1 << 13)
-+#define LTV_REV			(1 <<  7)
-+#define LTV_NL(x)		(((x) & 0x001f) << 0)
-+
-+/* Bit definitions for LTV_DATACTL */
-+#define LTV_DS_SAME		(0 << 12)
-+#define LTV_DS_D_TO_S		(1 << 12)
-+#define LTV_DS_S_TO_D		(2 << 12)
-+#define LTV_CHS_384		(0 <<  9)
-+#define LTV_CHS_480		(1 <<  9)
-+#define LTV_CHS_492		(2 <<  9)
-+#define LTV_DF_RGB		(0 <<  6)
-+#define LTV_DF_RGBX		(1 <<  6)
-+#define LTV_DF_XRGB		(2 <<  6)
-+#define LTV_RGB_RGB		(0 <<  2)
-+#define LTV_RGB_BGR		(1 <<  2)
-+#define LTV_RGB_GRB		(2 <<  2)
-+#define LTV_RGB_RBG		(3 <<  2)
-+
-+/* Bit definitions for LTV_ENTRY_MODE */
-+#define LTV_VSPL_ACTIVE_LOW	(0 << 15)
-+#define LTV_VSPL_ACTIVE_HIGH	(1 << 15)
-+#define LTV_HSPL_ACTIVE_LOW	(0 << 14)
-+#define LTV_HSPL_ACTIVE_HIGH	(1 << 14)
-+#define LTV_DPL_SAMPLE_RISING	(0 << 13)
-+#define LTV_DPL_SAMPLE_FALLING	(1 << 13)
-+#define LTV_EPL_ACTIVE_LOW	(0 << 12)
-+#define LTV_EPL_ACTIVE_HIGH	(1 << 12)
-+#define LTV_SS_LEFT_TO_RIGHT	(0 <<  8)
-+#define LTV_SS_RIGHT_TO_LEFT	(1 <<  8)
-+#define LTV_STB			(1 <<  1)
-+
-+/* Bit definitions for LTV_GATECTL1 */
-+#define LTV_CLW(x)		(((x) & 0x0007) << 12)
-+#define LTV_GAON		(1 <<  5)
-+#define LTV_SDR			(1 <<  3)
-+
-+/* Bit definitions for LTV_GATECTL2 */
-+#define LTV_NW_INV_FRAME	(0 << 14)
-+#define LTV_NW_INV_1LINE	(1 << 14)
-+#define LTV_NW_INV_2LINE	(2 << 14)
-+#define LTV_DSC			(1 << 12)
-+#define LTV_GIF			(1 <<  8)
-+#define LTV_FHN			(1 <<  7)
-+#define LTV_FTI(x)		(((x) & 0x0003) << 4)
-+#define LTV_FWI(x)		(((x) & 0x0003) << 0)
-+
-+/* Bit definitions for LTV_SOTCTL */
-+#define LTV_SDT(x)		(((x) & 0x0007) << 10)
-+#define LTV_EQ(x)		(((x) & 0x0007) <<  2)
-+
-+/* Bit definitions for LTV_PWRCTL1 */
-+#define LTV_VCOM_DISABLE	(1 << 14)
-+#define LTV_VCOMOUT_ENABLE	(1 << 11)
-+#define LTV_POWER_ON		(1 <<  9)
-+#define LTV_DRIVE_CURRENT(x)	(((x) & 0x0007) << 4)	/* 0=off, 5=max */
-+#define LTV_SUPPLY_CURRENT(x)	(((x) & 0x0007) << 0)	/* 0=off, 5=max */
-+
-+/* Bit definitions for LTV_PWRCTL2 */
-+#define LTV_VCOML_ENABLE	(1 << 13)
-+#define LTV_VCOML_VOLTAGE(x)	(((x) & 0x001f) << 8)	/* 0=1V, 31=-1V */
-+#define LTV_VCOMH_VOLTAGE(x)	(((x) & 0x001f) << 0)	/* 0=3V, 31=4.5V */
-+
-+#endif /* __LTV350QV_H */
++#ifndef __ASM_ARCH_AT32AP700X_H__
++#define __ASM_ARCH_AT32AP700X_H__
++
++#define GPIO_PERIPH_A	0
++#define GPIO_PERIPH_B	1
++
++#define NR_GPIO_CONTROLLERS	4
++
++/*
++ * Pin numbers identifying specific GPIO pins on the chip. They can
++ * also be converted to IRQ numbers by passing them through
++ * gpio_to_irq().
++ */
++#define GPIO_PIOA_BASE	(0)
++#define GPIO_PIOB_BASE	(GPIO_PIOA_BASE + 32)
++#define GPIO_PIOC_BASE	(GPIO_PIOB_BASE + 32)
++#define GPIO_PIOD_BASE	(GPIO_PIOC_BASE + 32)
++#define GPIO_PIOE_BASE	(GPIO_PIOD_BASE + 32)
++
++#define GPIO_PIN_PA(N)	(GPIO_PIOA_BASE + (N))
++#define GPIO_PIN_PB(N)	(GPIO_PIOB_BASE + (N))
++#define GPIO_PIN_PC(N)	(GPIO_PIOC_BASE + (N))
++#define GPIO_PIN_PD(N)	(GPIO_PIOD_BASE + (N))
++#define GPIO_PIN_PE(N)	(GPIO_PIOE_BASE + (N))
++
++#endif /* __ASM_ARCH_AT32AP700X_H__ */
 diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
-index 0215965..e1318e0 100644
+index d6993a6..8816b66 100644
 --- a/include/asm-avr32/arch-at32ap/board.h
 +++ b/include/asm-avr32/arch-at32ap/board.h
-@@ -6,6 +6,8 @@
- 
- #include <linux/types.h>
+@@ -51,6 +51,9 @@ struct platform_device *
+ at32_add_device_ide(unsigned int id, unsigned int extint,
+ 		    struct ide_platform_data *data);
  
-+#define GPIO_PIN_NONE	(-1)
++/* mask says which PWM channels to mux */
++struct platform_device *at32_add_device_pwm(u32 mask);
 +
- /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
- void at32_add_system_devices(void);
- 
-@@ -31,11 +33,26 @@ struct spi_board_info;
- struct platform_device *
- at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
+ /* depending on what's hooked up, not all SSC pins will be used */
+ #define	ATMEL_SSC_TK		0x01
+ #define	ATMEL_SSC_TF		0x02
+@@ -66,7 +69,13 @@ struct platform_device *
+ at32_add_device_ssc(unsigned int id, unsigned int flags);
  
-+struct platform_device *at32_add_device_twi(unsigned int id);
+ struct platform_device *at32_add_device_twi(unsigned int id);
+-struct platform_device *at32_add_device_mci(unsigned int id);
 +
 +struct mci_platform_data {
 +	int detect_pin;
@@ -9245,41 +16479,49 @@ index 0215965..e1318e0 100644
 +};
 +struct platform_device *
 +at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
-+
- struct atmel_lcdfb_info;
- struct platform_device *
- at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
- 		     unsigned long fbmem_start, unsigned long fbmem_len);
+ struct platform_device *at32_add_device_ac97c(unsigned int id);
+ struct platform_device *at32_add_device_abdac(unsigned int id);
  
-+struct usba_platform_data {
-+	int vbus_pin;
-+};
-+struct platform_device *
-+at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
-+
- /* depending on what's hooked up, not all SSC pins will be used */
- #define	ATMEL_SSC_TK		0x01
- #define	ATMEL_SSC_TF		0x02
-@@ -50,4 +67,7 @@ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
- struct platform_device *
- at32_add_device_ssc(unsigned int id, unsigned int flags);
+diff --git a/include/asm-avr32/arch-at32ap/cpu.h b/include/asm-avr32/arch-at32ap/cpu.h
+index a762f42..0dc2026 100644
+--- a/include/asm-avr32/arch-at32ap/cpu.h
++++ b/include/asm-avr32/arch-at32ap/cpu.h
+@@ -14,7 +14,7 @@
+  * Only AT32AP7000 is defined for now. We can identify the specific
+  * chip at runtime, but I'm not sure if it's really worth it.
+  */
+-#ifdef CONFIG_CPU_AT32AP7000
++#ifdef CONFIG_CPU_AT32AP700X
+ # define cpu_is_at32ap7000()	(1)
+ #else
+ # define cpu_is_at32ap7000()	(0)
+diff --git a/include/asm-avr32/arch-at32ap/io.h b/include/asm-avr32/arch-at32ap/io.h
+index ee59e40..4ec6abc 100644
+--- a/include/asm-avr32/arch-at32ap/io.h
++++ b/include/asm-avr32/arch-at32ap/io.h
+@@ -4,7 +4,7 @@
+ /* For "bizarre" halfword swapping */
+ #include <linux/byteorder/swabb.h>
  
-+struct platform_device *at32_add_device_ac97c(unsigned int id);
-+struct platform_device *at32_add_device_abdac(unsigned int id);
-+
- #endif /* __ASM_ARCH_BOARD_H */
+-#if defined(CONFIG_AP7000_32_BIT_SMC)
++#if defined(CONFIG_AP700X_32_BIT_SMC)
+ # define __swizzle_addr_b(addr)	(addr ^ 3UL)
+ # define __swizzle_addr_w(addr)	(addr ^ 2UL)
+ # define __swizzle_addr_l(addr)	(addr)
+@@ -14,7 +14,7 @@
+ # define __mem_ioswabb(a, x)	(x)
+ # define __mem_ioswabw(a, x)	swab16(x)
+ # define __mem_ioswabl(a, x)	swab32(x)
+-#elif defined(CONFIG_AP7000_16_BIT_SMC)
++#elif defined(CONFIG_AP700X_16_BIT_SMC)
+ # define __swizzle_addr_b(addr)	(addr ^ 1UL)
+ # define __swizzle_addr_w(addr)	(addr)
+ # define __swizzle_addr_l(addr)	(addr)
 diff --git a/include/asm-avr32/arch-at32ap/portmux.h b/include/asm-avr32/arch-at32ap/portmux.h
-index 9930871..135e034 100644
+index b1abe6b..135e034 100644
 --- a/include/asm-avr32/arch-at32ap/portmux.h
 +++ b/include/asm-avr32/arch-at32ap/portmux.h
-@@ -19,10 +19,23 @@
- #define AT32_GPIOF_OUTPUT	0x00000002	/* (OUT) Enable output driver */
- #define AT32_GPIOF_HIGH		0x00000004	/* (OUT) Set output high */
- #define AT32_GPIOF_DEGLITCH	0x00000008	/* (IN) Filter glitches */
-+#define AT32_GPIOF_MULTIDRV	0x00000010	/* Enable multidriver option */
- 
- void at32_select_periph(unsigned int pin, unsigned int periph,
- 			unsigned long flags);
+@@ -26,4 +26,16 @@ void at32_select_periph(unsigned int pin, unsigned int periph,
  void at32_select_gpio(unsigned int pin, unsigned long flags);
  void at32_reserve_pin(unsigned int pin);
  
@@ -9296,81 +16538,6 @@ index 9930871..135e034 100644
 +#endif /* CONFIG_GPIO_DEV */
 +
  #endif /* __ASM_ARCH_PORTMUX_H__ */
-diff --git a/include/asm-avr32/arch-at32ap/smc.h b/include/asm-avr32/arch-at32ap/smc.h
-index 07152b7..c98eea4 100644
---- a/include/asm-avr32/arch-at32ap/smc.h
-+++ b/include/asm-avr32/arch-at32ap/smc.h
-@@ -15,22 +15,50 @@
- /*
-  * All timing parameters are in nanoseconds.
-  */
-+struct smc_timing {
-+	/* Delay from address valid to assertion of given strobe */
-+	int ncs_read_setup;
-+	int nrd_setup;
-+	int ncs_write_setup;
-+	int nwe_setup;
-+
-+	/* Pulse length of given strobe */
-+	int ncs_read_pulse;
-+	int nrd_pulse;
-+	int ncs_write_pulse;
-+	int nwe_pulse;
-+
-+	/* Total cycle length of given operation */
-+	int read_cycle;
-+	int write_cycle;
-+
-+	/* Minimal recovery times, will extend cycle if needed */
-+	int ncs_read_recover;
-+	int nrd_recover;
-+	int ncs_write_recover;
-+	int nwe_recover;
-+};
-+
-+/*
-+ * All timing parameters are in clock cycles.
-+ */
- struct smc_config {
-+
- 	/* Delay from address valid to assertion of given strobe */
--	u16		ncs_read_setup;
--	u16		nrd_setup;
--	u16		ncs_write_setup;
--	u16		nwe_setup;
-+	u8		ncs_read_setup;
-+	u8		nrd_setup;
-+	u8		ncs_write_setup;
-+	u8		nwe_setup;
- 
- 	/* Pulse length of given strobe */
--	u16		ncs_read_pulse;
--	u16		nrd_pulse;
--	u16		ncs_write_pulse;
--	u16		nwe_pulse;
-+	u8		ncs_read_pulse;
-+	u8		nrd_pulse;
-+	u8		ncs_write_pulse;
-+	u8		nwe_pulse;
- 
- 	/* Total cycle length of given operation */
--	u16		read_cycle;
--	u16		write_cycle;
-+	u8		read_cycle;
-+	u8		write_cycle;
- 
- 	/* Bus width in bytes */
- 	u8		bus_width;
-@@ -76,6 +104,9 @@ struct smc_config {
- 	unsigned int	tdf_mode:1;
- };
- 
-+extern void smc_set_timing(struct smc_config *config,
-+			   const struct smc_timing *timing);
-+
- extern int smc_set_configuration(int cs, const struct smc_config *config);
- extern struct smc_config *smc_get_configuration(int cs);
- 
 diff --git a/include/asm-avr32/dma-controller.h b/include/asm-avr32/dma-controller.h
 new file mode 100644
 index 0000000..56a4965
@@ -9543,490 +16710,290 @@ index 0000000..56a4965
 +extern struct dma_controller *find_dma_controller(int id);
 +
 +#endif /* __ASM_AVR32_DMA_CONTROLLER_H */
-diff --git a/include/asm-avr32/dma-mapping.h b/include/asm-avr32/dma-mapping.h
-index 21bb60b..81e3426 100644
---- a/include/asm-avr32/dma-mapping.h
-+++ b/include/asm-avr32/dma-mapping.h
-@@ -264,7 +264,11 @@ static inline void
- dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
- 			size_t size, enum dma_data_direction direction)
- {
--	dma_cache_sync(dev, bus_to_virt(dma_handle), size, direction);
-+	/*
-+	 * No need to do anything since the CPU isn't supposed to
-+	 * touch this memory after we flushed it at mapping- or
-+	 * sync-for-device time.
-+	 */
- }
+diff --git a/include/asm-avr32/irq.h b/include/asm-avr32/irq.h
+index 83e6549..9315724 100644
+--- a/include/asm-avr32/irq.h
++++ b/include/asm-avr32/irq.h
+@@ -11,4 +11,9 @@
  
- static inline void
-@@ -309,12 +313,11 @@ static inline void
- dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
- 		    int nents, enum dma_data_direction direction)
- {
--	int i;
--
--	for (i = 0; i < nents; i++) {
--		dma_cache_sync(dev, page_address(sg[i].page) + sg[i].offset,
--			       sg[i].length, direction);
--	}
-+	/*
-+	 * No need to do anything since the CPU isn't supposed to
-+	 * touch this memory after we flushed it at mapping- or
-+	 * sync-for-device time.
-+	 */
- }
+ #define irq_canonicalize(i)	(i)
  
- static inline void
-diff --git a/include/asm-avr32/system.h b/include/asm-avr32/system.h
-index a8236ba..dc2d527 100644
---- a/include/asm-avr32/system.h
-+++ b/include/asm-avr32/system.h
-@@ -73,11 +73,16 @@ extern struct task_struct *__switch_to(struct task_struct *,
++#ifndef __ASSEMBLER__
++int nmi_enable(void);
++void nmi_disable(void);
++#endif
++
+ #endif /* __ASM_AVR32_IOCTLS_H */
+diff --git a/include/asm-avr32/kdebug.h b/include/asm-avr32/kdebug.h
+index fd7e990..ca4f954 100644
+--- a/include/asm-avr32/kdebug.h
++++ b/include/asm-avr32/kdebug.h
+@@ -5,6 +5,7 @@
+ enum die_val {
+ 	DIE_BREAKPOINT,
+ 	DIE_SSTEP,
++	DIE_NMI,
+ };
  
- extern void __xchg_called_with_bad_pointer(void);
+ #endif /* __ASM_AVR32_KDEBUG_H */
+diff --git a/include/asm-avr32/ocd.h b/include/asm-avr32/ocd.h
+index 996405e..6bef094 100644
+--- a/include/asm-avr32/ocd.h
++++ b/include/asm-avr32/ocd.h
+@@ -533,6 +533,11 @@ static inline void __ocd_write(unsigned int reg, unsigned long value)
+ #define ocd_read(reg)			__ocd_read(OCD_##reg)
+ #define ocd_write(reg, value)		__ocd_write(OCD_##reg, value)
  
--#ifdef __CHECKER__
--extern unsigned long __builtin_xchg(void *ptr, unsigned long x);
--#endif
-+static inline unsigned long xchg_u32(u32 val, volatile u32 *m)
-+{
-+	u32 ret;
++struct task_struct;
++
++void ocd_enable(struct task_struct *child);
++void ocd_disable(struct task_struct *child);
++
+ #endif /* !__ASSEMBLER__ */
  
--#define xchg_u32(val, m) __builtin_xchg((void *)m, val)
-+	asm volatile("xchg %[ret], %[m], %[val]"
-+			: [ret] "=&r"(ret), "=m"(*m)
-+			: "m"(*m), [m] "r"(m), [val] "r"(val)
-+			: "memory");
-+	return ret;
+ #endif /* __ASM_AVR32_OCD_H */
+diff --git a/include/asm-avr32/processor.h b/include/asm-avr32/processor.h
+index a52576b..4212551 100644
+--- a/include/asm-avr32/processor.h
++++ b/include/asm-avr32/processor.h
+@@ -57,11 +57,25 @@ struct avr32_cpuinfo {
+ 	unsigned short cpu_revision;
+ 	enum tlb_config tlb_config;
+ 	unsigned long features;
++	u32 device_id;
+ 
+ 	struct cache_info icache;
+ 	struct cache_info dcache;
+ };
+ 
++static inline unsigned int avr32_get_manufacturer_id(struct avr32_cpuinfo *cpu)
++{
++	return (cpu->device_id >> 1) & 0x7f;
 +}
++static inline unsigned int avr32_get_product_number(struct avr32_cpuinfo *cpu)
++{
++	return (cpu->device_id >> 12) & 0xffff;
++}
++static inline unsigned int avr32_get_chip_revision(struct avr32_cpuinfo *cpu)
++{
++	return (cpu->device_id >> 28) & 0x0f;
++}
++
+ extern struct avr32_cpuinfo boot_cpu_data;
  
- static inline unsigned long __xchg(unsigned long x,
- 				       volatile void *ptr,
-diff --git a/include/asm-avr32/unistd.h b/include/asm-avr32/unistd.h
-index 3b4e35b..de09009 100644
---- a/include/asm-avr32/unistd.h
-+++ b/include/asm-avr32/unistd.h
-@@ -303,6 +303,19 @@
- #ifdef __KERNEL__
- #define NR_syscalls		282
+ #ifdef CONFIG_SMP
+diff --git a/include/asm-avr32/ptrace.h b/include/asm-avr32/ptrace.h
+index 8c5dba5..9e2d44f 100644
+--- a/include/asm-avr32/ptrace.h
++++ b/include/asm-avr32/ptrace.h
+@@ -121,7 +121,15 @@ struct pt_regs {
+ };
  
-+/* Old stuff */
-+#define __IGNORE_uselib
-+#define __IGNORE_mmap
+ #ifdef __KERNEL__
+-# define user_mode(regs) (((regs)->sr & MODE_MASK) == MODE_USER)
++
++#include <asm/ocd.h>
++
++#define arch_ptrace_attach(child)       ocd_enable(child)
 +
-+/* NUMA stuff */
-+#define __IGNORE_mbind
-+#define __IGNORE_get_mempolicy
-+#define __IGNORE_set_mempolicy
-+#define __IGNORE_migrate_pages
-+#define __IGNORE_move_pages
++#define user_mode(regs)                 (((regs)->sr & MODE_MASK) == MODE_USER)
++#define instruction_pointer(regs)       ((regs)->pc)
++#define profile_pc(regs)                instruction_pointer(regs)
 +
-+/* SMP stuff */
-+#define __IGNORE_getcpu
+ extern void show_regs (struct pt_regs *);
  
- #define __ARCH_WANT_IPC_PARSE_VERSION
- #define __ARCH_WANT_STAT64
-diff --git a/include/linux/atmel-ssc.h b/include/linux/atmel-ssc.h
+ static __inline__ int valid_user_regs(struct pt_regs *regs)
+@@ -141,9 +149,6 @@ static __inline__ int valid_user_regs(struct pt_regs *regs)
+ 	return 0;
+ }
+ 
+-#define instruction_pointer(regs) ((regs)->pc)
+-
+-#define profile_pc(regs) instruction_pointer(regs)
+ 
+ #endif /* __KERNEL__ */
+ 
+diff --git a/include/asm-avr32/thread_info.h b/include/asm-avr32/thread_info.h
+index 184b574..07049f6 100644
+--- a/include/asm-avr32/thread_info.h
++++ b/include/asm-avr32/thread_info.h
+@@ -88,6 +88,7 @@ static inline struct thread_info *current_thread_info(void)
+ #define TIF_MEMDIE		6
+ #define TIF_RESTORE_SIGMASK	7	/* restore signal mask in do_signal */
+ #define TIF_CPU_GOING_TO_SLEEP	8	/* CPU is entering sleep 0 mode */
++#define TIF_DEBUG		30	/* debugging enabled */
+ #define TIF_USERSPACE		31      /* true if FS sets userspace */
+ 
+ #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+diff --git a/include/linux/atmel_pwm.h b/include/linux/atmel_pwm.h
 new file mode 100644
-index 0000000..0602339
+index 0000000..ea04abb
 --- /dev/null
-+++ b/include/linux/atmel-ssc.h
-@@ -0,0 +1,312 @@
-+#ifndef __INCLUDE_ATMEL_SSC_H
-+#define __INCLUDE_ATMEL_SSC_H
-+
-+#include <linux/platform_device.h>
-+#include <linux/list.h>
++++ b/include/linux/atmel_pwm.h
+@@ -0,0 +1,70 @@
++#ifndef __LINUX_ATMEL_PWM_H
++#define __LINUX_ATMEL_PWM_H
 +
-+struct ssc_device {
-+	struct list_head	list;
-+	void __iomem		*regs;
-+	struct platform_device	*pdev;
-+	struct clk		*clk;
-+	int			user;
-+	int			irq;
++/**
++ * struct pwm_channel - driver handle to a PWM channel
++ * @regs: base of this channel's registers
++ * @index: number of this channel (0..31)
++ * @mck: base clock rate, which can be prescaled and maybe subdivided
++ *
++ * Drivers initialize a pwm_channel structure using pwm_channel_alloc().
++ * Then they configure its clock rate (derived from MCK), alignment,
++ * polarity, and duty cycle by writing directly to the channel registers,
++ * before enabling the channel by calling pwm_channel_enable().
++ *
++ * After emitting a PWM signal for the desired length of time, drivers
++ * may then pwm_channel_disable() or pwm_channel_free().  Both of these
++ * disable the channel, but when it's freed the IRQ is deconfigured and
++ * the channel must later be re-allocated and reconfigured.
++ *
++ * Note that if the period or duty cycle need to be changed while the
++ * PWM channel is operating, drivers must use the PWM_CUPD double buffer
++ * mechanism, either polling until they change or getting implicitly
++ * notified through a once-per-period interrupt handler.
++ */
++struct pwm_channel {
++	void __iomem	*regs;
++	unsigned	index;
++	unsigned long	mck;
 +};
 +
-+struct ssc_device * __must_check ssc_request(unsigned int ssc_num);
-+void ssc_free(struct ssc_device *ssc);
-+
-+/* SSC register offsets */
-+
-+/* SSC Control Register */
-+#define SSC_CR				0x00000000
-+#define SSC_CR_RXDIS_SIZE			 1
-+#define SSC_CR_RXDIS_OFFSET			 1
-+#define SSC_CR_RXEN_SIZE			 1
-+#define SSC_CR_RXEN_OFFSET			 0
-+#define SSC_CR_SWRST_SIZE			 1
-+#define SSC_CR_SWRST_OFFSET			15
-+#define SSC_CR_TXDIS_SIZE			 1
-+#define SSC_CR_TXDIS_OFFSET			 9
-+#define SSC_CR_TXEN_SIZE			 1
-+#define SSC_CR_TXEN_OFFSET			 8
-+
-+/* SSC Clock Mode Register */
-+#define SSC_CMR				0x00000004
-+#define SSC_CMR_DIV_SIZE			12
-+#define SSC_CMR_DIV_OFFSET			 0
-+
-+/* SSC Receive Clock Mode Register */
-+#define SSC_RCMR			0x00000010
-+#define SSC_RCMR_CKG_SIZE			 2
-+#define SSC_RCMR_CKG_OFFSET			 6
-+#define SSC_RCMR_CKI_SIZE			 1
-+#define SSC_RCMR_CKI_OFFSET			 5
-+#define SSC_RCMR_CKO_SIZE			 3
-+#define SSC_RCMR_CKO_OFFSET			 2
-+#define SSC_RCMR_CKS_SIZE			 2
-+#define SSC_RCMR_CKS_OFFSET			 0
-+#define SSC_RCMR_PERIOD_SIZE			 8
-+#define SSC_RCMR_PERIOD_OFFSET			24
-+#define SSC_RCMR_START_SIZE			 4
-+#define SSC_RCMR_START_OFFSET			 8
-+#define SSC_RCMR_STOP_SIZE			 1
-+#define SSC_RCMR_STOP_OFFSET			12
-+#define SSC_RCMR_STTDLY_SIZE			 8
-+#define SSC_RCMR_STTDLY_OFFSET			16
-+
-+/* SSC Receive Frame Mode Register */
-+#define SSC_RFMR			0x00000014
-+#define SSC_RFMR_DATLEN_SIZE			 5
-+#define SSC_RFMR_DATLEN_OFFSET			 0
-+#define SSC_RFMR_DATNB_SIZE			 4
-+#define SSC_RFMR_DATNB_OFFSET			 8
-+#define SSC_RFMR_FSEDGE_SIZE			 1
-+#define SSC_RFMR_FSEDGE_OFFSET			24
-+#define SSC_RFMR_FSLEN_SIZE			 4
-+#define SSC_RFMR_FSLEN_OFFSET			16
-+#define SSC_RFMR_FSOS_SIZE			 4
-+#define SSC_RFMR_FSOS_OFFSET			20
-+#define SSC_RFMR_LOOP_SIZE			 1
-+#define SSC_RFMR_LOOP_OFFSET			 5
-+#define SSC_RFMR_MSBF_SIZE			 1
-+#define SSC_RFMR_MSBF_OFFSET			 7
-+
-+/* SSC Transmit Clock Mode Register */
-+#define SSC_TCMR			0x00000018
-+#define SSC_TCMR_CKG_SIZE			 2
-+#define SSC_TCMR_CKG_OFFSET			 6
-+#define SSC_TCMR_CKI_SIZE			 1
-+#define SSC_TCMR_CKI_OFFSET			 5
-+#define SSC_TCMR_CKO_SIZE			 3
-+#define SSC_TCMR_CKO_OFFSET			 2
-+#define SSC_TCMR_CKS_SIZE			 2
-+#define SSC_TCMR_CKS_OFFSET			 0
-+#define SSC_TCMR_PERIOD_SIZE			 8
-+#define SSC_TCMR_PERIOD_OFFSET			24
-+#define SSC_TCMR_START_SIZE			 4
-+#define SSC_TCMR_START_OFFSET			 8
-+#define SSC_TCMR_STTDLY_SIZE			 8
-+#define SSC_TCMR_STTDLY_OFFSET			16
-+
-+/* SSC Transmit Frame Mode Register */
-+#define SSC_TFMR			0x0000001c
-+#define SSC_TFMR_DATDEF_SIZE			 1
-+#define SSC_TFMR_DATDEF_OFFSET			 5
-+#define SSC_TFMR_DATLEN_SIZE			 5
-+#define SSC_TFMR_DATLEN_OFFSET			 0
-+#define SSC_TFMR_DATNB_SIZE			 4
-+#define SSC_TFMR_DATNB_OFFSET			 8
-+#define SSC_TFMR_FSDEN_SIZE			 1
-+#define SSC_TFMR_FSDEN_OFFSET			23
-+#define SSC_TFMR_FSEDGE_SIZE			 1
-+#define SSC_TFMR_FSEDGE_OFFSET			24
-+#define SSC_TFMR_FSLEN_SIZE			 4
-+#define SSC_TFMR_FSLEN_OFFSET			16
-+#define SSC_TFMR_FSOS_SIZE			 3
-+#define SSC_TFMR_FSOS_OFFSET			20
-+#define SSC_TFMR_MSBF_SIZE			 1
-+#define SSC_TFMR_MSBF_OFFSET			 7
-+
-+/* SSC Receive Hold Register */
-+#define SSC_RHR				0x00000020
-+#define SSC_RHR_RDAT_SIZE			32
-+#define SSC_RHR_RDAT_OFFSET			 0
-+
-+/* SSC Transmit Hold Register */
-+#define SSC_THR				0x00000024
-+#define SSC_THR_TDAT_SIZE			32
-+#define SSC_THR_TDAT_OFFSET			 0
-+
-+/* SSC Receive Sync. Holding Register */
-+#define SSC_RSHR			0x00000030
-+#define SSC_RSHR_RSDAT_SIZE			16
-+#define SSC_RSHR_RSDAT_OFFSET			 0
-+
-+/* SSC Transmit Sync. Holding Register */
-+#define SSC_TSHR			0x00000034
-+#define SSC_TSHR_TSDAT_SIZE			16
-+#define SSC_TSHR_RSDAT_OFFSET			 0
-+
-+/* SSC Receive Compare 0 Register */
-+#define SSC_RC0R			0x00000038
-+#define SSC_RC0R_CP0_SIZE			16
-+#define SSC_RC0R_CP0_OFFSET			 0
-+
-+/* SSC Receive Compare 1 Register */
-+#define SSC_RC1R			0x0000003c
-+#define SSC_RC1R_CP1_SIZE			16
-+#define SSC_RC1R_CP1_OFFSET			 0
-+
-+/* SSC Status Register */
-+#define SSC_SR				0x00000040
-+#define SSC_SR_CP0_SIZE				 1
-+#define SSC_SR_CP0_OFFSET			 8
-+#define SSC_SR_CP1_SIZE				 1
-+#define SSC_SR_CP1_OFFSET			 9
-+#define SSC_SR_ENDRX_SIZE			 1
-+#define SSC_SR_ENDRX_OFFSET			 6
-+#define SSC_SR_ENDTX_SIZE			 1
-+#define SSC_SR_ENDTX_OFFSET			 2
-+#define SSC_SR_OVRUN_SIZE			 1
-+#define SSC_SR_OVRUN_OFFSET			 5
-+#define SSC_SR_RXBUFF_SIZE			 1
-+#define SSC_SR_RXBUFF_OFFSET			 7
-+#define SSC_SR_RXEN_SIZE			 1
-+#define SSC_SR_RXEN_OFFSET			17
-+#define SSC_SR_RXRDY_SIZE			 1
-+#define SSC_SR_RXRDY_OFFSET			 4
-+#define SSC_SR_RXSYN_SIZE			 1
-+#define SSC_SR_RXSYN_OFFSET			11
-+#define SSC_SR_TXBUFE_SIZE			 1
-+#define SSC_SR_TXBUFE_OFFSET			 3
-+#define SSC_SR_TXEMPTY_SIZE			 1
-+#define SSC_SR_TXEMPTY_OFFSET			 1
-+#define SSC_SR_TXEN_SIZE			 1
-+#define SSC_SR_TXEN_OFFSET			16
-+#define SSC_SR_TXRDY_SIZE			 1
-+#define SSC_SR_TXRDY_OFFSET			 0
-+#define SSC_SR_TXSYN_SIZE			 1
-+#define SSC_SR_TXSYN_OFFSET			10
-+
-+/* SSC Interrupt Enable Register */
-+#define SSC_IER				0x00000044
-+#define SSC_IER_CP0_SIZE			 1
-+#define SSC_IER_CP0_OFFSET			 8
-+#define SSC_IER_CP1_SIZE			 1
-+#define SSC_IER_CP1_OFFSET			 9
-+#define SSC_IER_ENDRX_SIZE			 1
-+#define SSC_IER_ENDRX_OFFSET			 6
-+#define SSC_IER_ENDTX_SIZE			 1
-+#define SSC_IER_ENDTX_OFFSET			 2
-+#define SSC_IER_OVRUN_SIZE			 1
-+#define SSC_IER_OVRUN_OFFSET			 5
-+#define SSC_IER_RXBUFF_SIZE			 1
-+#define SSC_IER_RXBUFF_OFFSET			 7
-+#define SSC_IER_RXRDY_SIZE			 1
-+#define SSC_IER_RXRDY_OFFSET			 4
-+#define SSC_IER_RXSYN_SIZE			 1
-+#define SSC_IER_RXSYN_OFFSET			11
-+#define SSC_IER_TXBUFE_SIZE			 1
-+#define SSC_IER_TXBUFE_OFFSET			 3
-+#define SSC_IER_TXEMPTY_SIZE			 1
-+#define SSC_IER_TXEMPTY_OFFSET			 1
-+#define SSC_IER_TXRDY_SIZE			 1
-+#define SSC_IER_TXRDY_OFFSET			 0
-+#define SSC_IER_TXSYN_SIZE			 1
-+#define SSC_IER_TXSYN_OFFSET			10
-+
-+/* SSC Interrupt Disable Register */
-+#define SSC_IDR				0x00000048
-+#define SSC_IDR_CP0_SIZE			 1
-+#define SSC_IDR_CP0_OFFSET			 8
-+#define SSC_IDR_CP1_SIZE			 1
-+#define SSC_IDR_CP1_OFFSET			 9
-+#define SSC_IDR_ENDRX_SIZE			 1
-+#define SSC_IDR_ENDRX_OFFSET			 6
-+#define SSC_IDR_ENDTX_SIZE			 1
-+#define SSC_IDR_ENDTX_OFFSET			 2
-+#define SSC_IDR_OVRUN_SIZE			 1
-+#define SSC_IDR_OVRUN_OFFSET			 5
-+#define SSC_IDR_RXBUFF_SIZE			 1
-+#define SSC_IDR_RXBUFF_OFFSET			 7
-+#define SSC_IDR_RXRDY_SIZE			 1
-+#define SSC_IDR_RXRDY_OFFSET			 4
-+#define SSC_IDR_RXSYN_SIZE			 1
-+#define SSC_IDR_RXSYN_OFFSET			11
-+#define SSC_IDR_TXBUFE_SIZE			 1
-+#define SSC_IDR_TXBUFE_OFFSET			 3
-+#define SSC_IDR_TXEMPTY_SIZE			 1
-+#define SSC_IDR_TXEMPTY_OFFSET			 1
-+#define SSC_IDR_TXRDY_SIZE			 1
-+#define SSC_IDR_TXRDY_OFFSET			 0
-+#define SSC_IDR_TXSYN_SIZE			 1
-+#define SSC_IDR_TXSYN_OFFSET			10
-+
-+/* SSC Interrupt Mask Register */
-+#define SSC_IMR				0x0000004c
-+#define SSC_IMR_CP0_SIZE			 1
-+#define SSC_IMR_CP0_OFFSET			 8
-+#define SSC_IMR_CP1_SIZE			 1
-+#define SSC_IMR_CP1_OFFSET			 9
-+#define SSC_IMR_ENDRX_SIZE			 1
-+#define SSC_IMR_ENDRX_OFFSET			 6
-+#define SSC_IMR_ENDTX_SIZE			 1
-+#define SSC_IMR_ENDTX_OFFSET			 2
-+#define SSC_IMR_OVRUN_SIZE			 1
-+#define SSC_IMR_OVRUN_OFFSET			 5
-+#define SSC_IMR_RXBUFF_SIZE			 1
-+#define SSC_IMR_RXBUFF_OFFSET			 7
-+#define SSC_IMR_RXRDY_SIZE			 1
-+#define SSC_IMR_RXRDY_OFFSET			 4
-+#define SSC_IMR_RXSYN_SIZE			 1
-+#define SSC_IMR_RXSYN_OFFSET			11
-+#define SSC_IMR_TXBUFE_SIZE			 1
-+#define SSC_IMR_TXBUFE_OFFSET			 3
-+#define SSC_IMR_TXEMPTY_SIZE			 1
-+#define SSC_IMR_TXEMPTY_OFFSET			 1
-+#define SSC_IMR_TXRDY_SIZE			 1
-+#define SSC_IMR_TXRDY_OFFSET			 0
-+#define SSC_IMR_TXSYN_SIZE			 1
-+#define SSC_IMR_TXSYN_OFFSET			10
-+
-+/* SSC PDC Receive Pointer Register */
-+#define SSC_PDC_RPR			0x00000100
-+
-+/* SSC PDC Receive Counter Register */
-+#define SSC_PDC_RCR			0x00000104
-+
-+/* SSC PDC Transmit Pointer Register */
-+#define SSC_PDC_TPR			0x00000108
-+
-+/* SSC PDC Receive Next Pointer Register */
-+#define SSC_PDC_RNPR			0x00000110
-+
-+/* SSC PDC Receive Next Counter Register */
-+#define SSC_PDC_RNCR			0x00000114
-+
-+/* SSC PDC Transmit Counter Register */
-+#define SSC_PDC_TCR			0x0000010c
-+
-+/* SSC PDC Transmit Next Pointer Register */
-+#define SSC_PDC_TNPR			0x00000118
-+
-+/* SSC PDC Transmit Next Counter Register */
-+#define SSC_PDC_TNCR			0x0000011c
-+
-+/* SSC PDC Transfer Control Register */
-+#define SSC_PDC_PTCR			0x00000120
-+#define SSC_PDC_PTCR_RXTDIS_SIZE		 1
-+#define SSC_PDC_PTCR_RXTDIS_OFFSET		 1
-+#define SSC_PDC_PTCR_RXTEN_SIZE			 1
-+#define SSC_PDC_PTCR_RXTEN_OFFSET		 0
-+#define SSC_PDC_PTCR_TXTDIS_SIZE		 1
-+#define SSC_PDC_PTCR_TXTDIS_OFFSET		 9
-+#define SSC_PDC_PTCR_TXTEN_SIZE			 1
-+#define SSC_PDC_PTCR_TXTEN_OFFSET		 8
-+
-+/* SSC PDC Transfer Status Register */
-+#define SSC_PDC_PTSR			0x00000124
-+#define SSC_PDC_PTSR_RXTEN_SIZE			 1
-+#define SSC_PDC_PTSR_RXTEN_OFFSET		 0
-+#define SSC_PDC_PTSR_TXTEN_SIZE			 1
-+#define SSC_PDC_PTSR_TXTEN_OFFSET		 8
++extern int pwm_channel_alloc(int index, struct pwm_channel *ch);
++extern int pwm_channel_free(struct pwm_channel *ch);
 +
-+/* Bit manipulation macros */
-+#define SSC_BIT(name)					\
-+	(1 << SSC_##name##_OFFSET)
-+#define SSC_BF(name, value)				\
-+	(((value) & ((1 << SSC_##name##_SIZE) - 1))	\
-+	 << SSC_##name##_OFFSET)
-+#define SSC_BFEXT(name, value)				\
-+	(((value) >> SSC_##name##_OFFSET)		\
-+	 & ((1 << SSC_##name##_SIZE) - 1))
-+#define SSC_BFINS(name, value, old)			\
-+	(((old) & ~(((1 << SSC_##name##_SIZE) - 1)	\
-+	<< SSC_##name##_OFFSET)) | SSC_BF(name, value))
++extern int pwm_clk_alloc(unsigned prescale, unsigned div);
++extern void pwm_clk_free(unsigned clk);
 +
-+/* Register access macros */
-+#define ssc_readl(base, reg)		__raw_readl(base + SSC_##reg)
-+#define ssc_writel(base, reg, value)	__raw_writel((value), base + SSC_##reg)
++extern int __pwm_channel_onoff(struct pwm_channel *ch, int enabled);
 +
-+#endif /* __INCLUDE_ATMEL_SSC_H */
-diff --git a/include/linux/spi/at73c213.h b/include/linux/spi/at73c213.h
-new file mode 100644
-index 0000000..0f20a70
---- /dev/null
-+++ b/include/linux/spi/at73c213.h
-@@ -0,0 +1,25 @@
-+/*
-+ * Board-specific data used to set up AT73c213 audio DAC driver.
-+ */
++#define pwm_channel_enable(ch)	__pwm_channel_onoff((ch), 1)
++#define pwm_channel_disable(ch)	__pwm_channel_onoff((ch), 0)
 +
-+#ifndef __LINUX_SPI_AT73C213_H
-+#define __LINUX_SPI_AT73C213_H
++/* periodic interrupts, mostly for CUPD changes to period or cycle */
++extern int pwm_channel_handler(struct pwm_channel *ch,
++		void (*handler)(struct pwm_channel *ch));
 +
-+/**
-+ * at73c213_board_info - how the external DAC is wired to the device.
-+ *
-+ * @ssc_id: SSC platform_driver id the DAC shall use to stream the audio.
-+ * @dac_clk: the external clock used to provide master clock to the DAC.
-+ * @shortname: a short discription for the DAC, seen by userspace tools.
-+ *
-+ * This struct contains the configuration of the hardware connection to the
-+ * external DAC. The DAC needs a master clock and a I2S audio stream. It also
-+ * provides a name which is used to identify it in userspace tools.
-+ */
-+struct at73c213_board_info {
-+	int		ssc_id;
-+	struct clk	*dac_clk;
-+	char		shortname[32];
-+};
-+
-+#endif /* __LINUX_SPI_AT73C213_H */
-diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl
-index f7844f6..6631586 100755
---- a/scripts/checkstack.pl
-+++ b/scripts/checkstack.pl
-@@ -12,6 +12,7 @@
- #	sh64 port by Paul Mundt
- #	Random bits by Matt Mackall <mpm@selenic.com>
- #	M68k port by Geert Uytterhoeven and Andreas Schwab
-+#	AVR32 port by Haavard Skinnemoen <hskinnemoen@atmel.com>
- #
- #	Usage:
- #	objdump -d vmlinux | stackcheck.pl [arch]
-@@ -37,6 +38,10 @@ my (@stack, $re, $x, $xs);
- 	if ($arch eq 'arm') {
- 		#c0008ffc:	e24dd064	sub	sp, sp, #100	; 0x64
- 		$re = qr/.*sub.*sp, sp, #(([0-9]{2}|[3-9])[0-9]{2})/o;
-+	} elsif ($arch eq 'avr32') {
-+		#8000008a:       20 1d           sub sp,4
-+		#80000ca8:       fa cd 05 b0     sub sp,sp,1456
-+		$re = qr/^.*sub.*sp.*,([0-9]{1,8})/o;
- 	} elsif ($arch =~ /^i[3456]86$/) {
- 		#c0105234:       81 ec ac 05 00 00       sub    $0x5ac,%esp
- 		$re = qr/^.*[as][du][db]    \$(0x$x{1,8}),\%esp$/o;
++/* per-channel registers (banked at pwm_channel->regs) */
++#define PWM_CMR		0x00		/* mode register */
++#define		PWM_CPR_CPD	(1 << 10)	/* set: CUPD modifies period */
++#define		PWM_CPR_CPOL	(1 << 9)	/* set: idle high */
++#define		PWM_CPR_CALG	(1 << 8)	/* set: center align */
++#define		PWM_CPR_CPRE	(0xf << 0)	/* mask: rate is mck/(2^pre) */
++#define		PWM_CPR_CLKA	(0xb << 0)	/* rate CLKA */
++#define		PWM_CPR_CLKB	(0xc << 0)	/* rate CLKB */
++#define PWM_CDTY	0x04		/* duty cycle (max of CPRD) */
++#define PWM_CPRD	0x08		/* period (count up from zero) */
++#define PWM_CCNT	0x0c		/* counter (20 bits?) */
++#define PWM_CUPD	0x10		/* update CPRD (or CDTY) next period */
++
++static inline void
++pwm_channel_writel(struct pwm_channel *pwmc, unsigned offset, u32 val)
++{
++	__raw_writel(val, pwmc->regs + offset);
++}
++
++static inline u32 pwm_channel_readl(struct pwm_channel *pwmc, unsigned offset)
++{
++	return __raw_readl(pwmc->regs + offset);
++}
++
++#endif /* __LINUX_ATMEL_PWM_H */
+diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h
+index 4eea637..336c20d 100644
+--- a/include/video/atmel_lcdc.h
++++ b/include/video/atmel_lcdc.h
+@@ -22,7 +22,7 @@
+ #ifndef __ATMEL_LCDC_H__
+ #define __ATMEL_LCDC_H__
+ 
+- /* LCD Controller info data structure */
++ /* LCD Controller info data structure, stored in device platform_data */
+ struct atmel_lcdfb_info {
+ 	spinlock_t		lock;
+ 	struct fb_info		*info;
+@@ -33,7 +33,14 @@ struct atmel_lcdfb_info {
+ 	struct platform_device	*pdev;
+ 	struct clk		*bus_clk;
+ 	struct clk		*lcdc_clk;
+-	unsigned int		default_bpp;
++
++#ifdef CONFIG_BACKLIGHT_ATMEL_LCDC
++	struct backlight_device	*backlight;
++	u8			bl_power;
++#endif
++	bool			lcdcon_is_backlight;
++
++	u8			default_bpp;
+ 	unsigned int		default_lcdcon2;
+ 	unsigned int		default_dmacon;
+ 	void (*atmel_lcdfb_power_control)(int on);
+@@ -115,20 +122,20 @@ struct atmel_lcdfb_info {
+ #define		ATMEL_LCDC_MEMOR_LITTLE		(1 << 31)
+ 
+ #define ATMEL_LCDC_TIM1		0x0808
+-#define	ATMEL_LCDC_VFP		(0xff <<  0)
++#define	ATMEL_LCDC_VFP		(0xffU <<  0)
+ #define	ATMEL_LCDC_VBP_OFFSET		8
+-#define	ATMEL_LCDC_VBP		(0xff <<  ATMEL_LCDC_VBP_OFFSET)
++#define	ATMEL_LCDC_VBP		(0xffU <<  ATMEL_LCDC_VBP_OFFSET)
+ #define	ATMEL_LCDC_VPW_OFFSET		16
+-#define	ATMEL_LCDC_VPW		(0x3f << ATMEL_LCDC_VPW_OFFSET)
++#define	ATMEL_LCDC_VPW		(0x3fU << ATMEL_LCDC_VPW_OFFSET)
+ #define	ATMEL_LCDC_VHDLY_OFFSET		24
+-#define	ATMEL_LCDC_VHDLY	(0xf  << ATMEL_LCDC_VHDLY_OFFSET)
++#define	ATMEL_LCDC_VHDLY	(0xfU  << ATMEL_LCDC_VHDLY_OFFSET)
+ 
+ #define ATMEL_LCDC_TIM2		0x080c
+-#define	ATMEL_LCDC_HBP		(0xff  <<  0)
++#define	ATMEL_LCDC_HBP		(0xffU  <<  0)
+ #define	ATMEL_LCDC_HPW_OFFSET		8
+-#define	ATMEL_LCDC_HPW		(0x3f  <<  ATMEL_LCDC_HPW_OFFSET)
++#define	ATMEL_LCDC_HPW		(0x3fU  <<  ATMEL_LCDC_HPW_OFFSET)
+ #define	ATMEL_LCDC_HFP_OFFSET		21
+-#define	ATMEL_LCDC_HFP		(0x7ff << ATMEL_LCDC_HFP_OFFSET)
++#define	ATMEL_LCDC_HFP		(0x7ffU << ATMEL_LCDC_HFP_OFFSET)
+ 
+ #define ATMEL_LCDC_LCDFRMCFG	0x0810
+ #define	ATMEL_LCDC_LINEVAL	(0x7ff <<  0)
+diff --git a/kernel/ptrace.c b/kernel/ptrace.c
+index c25db86..c719bb9 100644
+--- a/kernel/ptrace.c
++++ b/kernel/ptrace.c
+@@ -470,6 +470,8 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
+ 	lock_kernel();
+ 	if (request == PTRACE_TRACEME) {
+ 		ret = ptrace_traceme();
++		if (!ret)
++			arch_ptrace_attach(current);
+ 		goto out;
+ 	}
+ 
 diff --git a/sound/Kconfig b/sound/Kconfig
-index e48b9b3..29a9979 100644
+index b2a2db4..29a9979 100644
 --- a/sound/Kconfig
 +++ b/sound/Kconfig
-@@ -63,6 +63,12 @@ source "sound/aoa/Kconfig"
+@@ -63,6 +63,8 @@ source "sound/aoa/Kconfig"
  
  source "sound/arm/Kconfig"
  
 +source "sound/avr32/Kconfig"
 +
-+if SPI
-+source "sound/spi/Kconfig"
-+endif
-+
- source "sound/mips/Kconfig"
- 
- source "sound/sh/Kconfig"
+ if SPI
+ source "sound/spi/Kconfig"
+ endif
 diff --git a/sound/Makefile b/sound/Makefile
-index 3ead922..e655df7 100644
+index c76d707..a52b236 100644
 --- a/sound/Makefile
 +++ b/sound/Makefile
-@@ -5,7 +5,8 @@ obj-$(CONFIG_SOUND) += soundcore.o
- obj-$(CONFIG_SOUND_PRIME) += sound_firmware.o
+@@ -6,7 +6,7 @@ obj-$(CONFIG_SOUND_PRIME) += sound_firmware.o
  obj-$(CONFIG_SOUND_PRIME) += oss/
  obj-$(CONFIG_DMASOUND) += oss/
--obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ sparc/ parisc/ pcmcia/ mips/ soc/
-+obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ avr32/ sh/ synth/ usb/ sparc/ spi/ parisc/ pcmcia/ mips/ soc/
-+
+ obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
+-	sparc/ spi/ parisc/ pcmcia/ mips/ soc/
++	sparc/ spi/ parisc/ pcmcia/ mips/ soc/ avr32/
  obj-$(CONFIG_SND_AOA) += aoa/
  
  # This one must be compilable even if sound is configured out
@@ -11054,7 +18021,7 @@ index 0000000..96246e7
 +
 +#endif /* __SOUND_AVR32_AC97C_H */
 diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
-index af37cd0..e3cc557 100644
+index 857008b..db69a17 100644
 --- a/sound/oss/Kconfig
 +++ b/sound/oss/Kconfig
 @@ -654,3 +654,7 @@ config SOUND_SH_DAC_AUDIO_CHANNEL
@@ -11066,7 +18033,7 @@ index af37cd0..e3cc557 100644
 +	tristate "Atmel AT32 Audio Bitstream DAC (ABDAC) support"
 +	depends on SOUND_PRIME && AVR32
 diff --git a/sound/oss/Makefile b/sound/oss/Makefile
-index 1200670..fafc246 100644
+index f883c4b..a41853b 100644
 --- a/sound/oss/Makefile
 +++ b/sound/oss/Makefile
 @@ -10,6 +10,7 @@ obj-$(CONFIG_SOUND_CS4232)	+= cs4232.o ad1848.o
@@ -11870,1303 +18837,3 @@ index 0000000..3c88e25
 +	__raw_writel((value), (port)->regs + DAC_##reg)
 +
 +#endif /* __SOUND_OSS_AT32_ABDAC_H__ */
-diff --git a/sound/spi/Kconfig b/sound/spi/Kconfig
-new file mode 100644
-index 0000000..0d08c29
---- /dev/null
-+++ b/sound/spi/Kconfig
-@@ -0,0 +1,31 @@
-+#SPI drivers
-+
-+menu "SPI devices"
-+	depends on SND != n
-+
-+config SND_AT73C213
-+	tristate "Atmel AT73C213 DAC driver"
-+	depends on ATMEL_SSC
-+	select SND_PCM
-+	help
-+	  Say Y here if you want to use the Atmel AT73C213 external DAC. This
-+	  DAC can be found on Atmel development boards.
-+
-+	  This driver requires the Atmel SSC driver for sound sink, a
-+	  peripheral found on most AT91 and AVR32 microprocessors.
-+
-+	  To compile this driver as a module, choose M here: the module will be
-+	  called snd-at73c213.
-+
-+config SND_AT73C213_TARGET_BITRATE
-+	int "Target bitrate for AT73C213"
-+	depends on SND_AT73C213
-+	default "48000"
-+	range 8000 50000
-+	help
-+	  Sets the target bitrate for the bitrate calculator in the driver.
-+	  Limited by hardware to be between 8000 Hz and 50000 Hz.
-+
-+	  Set to 48000 Hz by default.
-+
-+endmenu
-diff --git a/sound/spi/Makefile b/sound/spi/Makefile
-new file mode 100644
-index 0000000..026fb73
---- /dev/null
-+++ b/sound/spi/Makefile
-@@ -0,0 +1,5 @@
-+# Makefile for SPI drivers
-+
-+snd-at73c213-objs		:= at73c213.o
-+
-+obj-$(CONFIG_SND_AT73C213)	+= snd-at73c213.o
-diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c
-new file mode 100644
-index 0000000..f514f47
---- /dev/null
-+++ b/sound/spi/at73c213.c
-@@ -0,0 +1,1121 @@
-+/*
-+ * Driver for AT73C213 16-bit stereo DAC connected to Atmel SSC
-+ *
-+ * Copyright (C) 2006-2007 Atmel Norway
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published by
-+ * the Free Software Foundation.
-+ */
-+
-+/*#define DEBUG*/
-+
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/delay.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+
-+#include <sound/driver.h>
-+#include <sound/initval.h>
-+#include <sound/control.h>
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+
-+#include <linux/atmel-ssc.h>
-+
-+#include <linux/spi/spi.h>
-+#include <linux/spi/at73c213.h>
-+
-+#include "at73c213.h"
-+
-+#define BITRATE_MIN	 8000 /* Hardware limit? */
-+#define BITRATE_TARGET	CONFIG_SND_AT73C213_TARGET_BITRATE
-+#define BITRATE_MAX	50000 /* Hardware limit. */
-+
-+/* Initial (hardware reset) AT73C213 register values. */
-+static u8 snd_at73c213_original_image[18] =
-+{
-+	0x00,	/* 00 - CTRL    */
-+	0x05,	/* 01 - LLIG    */
-+	0x05,	/* 02 - RLIG    */
-+	0x08,	/* 03 - LPMG    */
-+	0x08,	/* 04 - RPMG    */
-+	0x00,	/* 05 - LLOG    */
-+	0x00,	/* 06 - RLOG    */
-+	0x22,	/* 07 - OLC     */
-+	0x09,	/* 08 - MC      */
-+	0x00,	/* 09 - CSFC    */
-+	0x00,	/* 0A - MISC    */
-+	0x00,	/* 0B -         */
-+	0x00,	/* 0C - PRECH   */
-+	0x05,	/* 0D - AUXG    */
-+	0x00,	/* 0E -         */
-+	0x00,	/* 0F -         */
-+	0x00,	/* 10 - RST     */
-+	0x00,	/* 11 - PA_CTRL */
-+};
-+
-+struct snd_at73c213 {
-+	struct snd_card			*card;
-+	struct snd_pcm			*pcm;
-+	struct snd_pcm_substream	*substream;
-+	struct at73c213_board_info	*board;
-+	int				irq;
-+	int				period;
-+	unsigned long			bitrate;
-+	struct clk			*bitclk;
-+	struct ssc_device		*ssc;
-+	struct spi_device		*spi;
-+	u8				spi_wbuffer[2];
-+	u8				spi_rbuffer[2];
-+	/* Image of the SPI registers in AT73C213. */
-+	u8				reg_image[18];
-+	/* Protect registers against concurrent access. */
-+	spinlock_t			lock;
-+};
-+
-+#define get_chip(card) ((struct snd_at73c213 *)card->private_data)
-+
-+static int
-+snd_at73c213_write_reg(struct snd_at73c213 *chip, u8 reg, u8 val)
-+{
-+	struct spi_message msg;
-+	struct spi_transfer msg_xfer = {
-+		.len		= 2,
-+		.cs_change	= 0,
-+	};
-+	int retval;
-+
-+	spi_message_init(&msg);
-+
-+	chip->spi_wbuffer[0] = reg;
-+	chip->spi_wbuffer[1] = val;
-+
-+	msg_xfer.tx_buf = chip->spi_wbuffer;
-+	msg_xfer.rx_buf = chip->spi_rbuffer;
-+	spi_message_add_tail(&msg_xfer, &msg);
-+
-+	retval = spi_sync(chip->spi, &msg);
-+
-+	if (!retval)
-+		chip->reg_image[reg] = val;
-+
-+	return retval;
-+}
-+
-+static struct snd_pcm_hardware snd_at73c213_playback_hw = {
-+	.info		= SNDRV_PCM_INFO_INTERLEAVED |
-+			  SNDRV_PCM_INFO_BLOCK_TRANSFER,
-+	.formats	= SNDRV_PCM_FMTBIT_S16_BE,
-+	.rates		= SNDRV_PCM_RATE_CONTINUOUS,
-+	.rate_min	= 8000,  /* Replaced by chip->bitrate later. */
-+	.rate_max	= 50000, /* Replaced by chip->bitrate later. */
-+	.channels_min	= 2,
-+	.channels_max	= 2,
-+	.buffer_bytes_max = 64 * 1024 - 1,
-+	.period_bytes_min = 512,
-+	.period_bytes_max = 64 * 1024 - 1,
-+	.periods_min	= 4,
-+	.periods_max	= 1024,
-+};
-+
-+/*
-+ * Calculate and set bitrate and divisions.
-+ */
-+static int snd_at73c213_set_bitrate(struct snd_at73c213 *chip)
-+{
-+	unsigned long ssc_rate = clk_get_rate(chip->ssc->clk);
-+	unsigned long dac_rate_new, ssc_div, status;
-+	unsigned long ssc_div_max, ssc_div_min;
-+	int max_tries;
-+
-+	/*
-+	 * We connect two clocks here, picking divisors so the I2S clocks
-+	 * out data at the same rate the DAC clocks it in ... and as close
-+	 * as practical to the desired target rate.
-+	 *
-+	 * The DAC master clock (MCLK) is programmable, and is either 256
-+	 * or (not here) 384 times the I2S output clock (BCLK).
-+	 */
-+
-+	/* SSC clock / (bitrate * stereo * 16-bit). */
-+	ssc_div = ssc_rate / (BITRATE_TARGET * 2 * 16);
-+	ssc_div_min = ssc_rate / (BITRATE_MAX * 2 * 16);
-+	ssc_div_max = ssc_rate / (BITRATE_MIN * 2 * 16);
-+	max_tries = (ssc_div_max - ssc_div_min) / 2;
-+
-+	if (max_tries < 1)
-+		max_tries = 1;
-+
-+	/* ssc_div must be a power of 2. */
-+	ssc_div = (ssc_div + 1) & ~1UL;
-+
-+	if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN) {
-+		ssc_div -= 2;
-+		if ((ssc_rate / (ssc_div * 2 * 16)) > BITRATE_MAX)
-+			return -ENXIO;
-+	}
-+
-+	/* Search for a possible bitrate. */
-+	do {
-+		/* SSC clock / (ssc divider * 16-bit * stereo). */
-+		if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN)
-+			return -ENXIO;
-+
-+		/* 256 / (2 * 16) = 8 */
-+		dac_rate_new = 8 * (ssc_rate / ssc_div);
-+
-+		status = clk_round_rate(chip->board->dac_clk, dac_rate_new);
-+		if (status < 0)
-+			return status;
-+
-+		/* Ignore difference smaller than 256 Hz. */
-+		if ((status/256) == (dac_rate_new/256))
-+			goto set_rate;
-+
-+		ssc_div += 2;
-+	} while (--max_tries);
-+
-+	/* Not able to find a valid bitrate. */
-+	return -ENXIO;
-+
-+set_rate:
-+	status = clk_set_rate(chip->board->dac_clk, status);
-+	if (status < 0)
-+		return status;
-+
-+	/* Set divider in SSC device. */
-+	ssc_writel(chip->ssc->regs, CMR, ssc_div/2);
-+
-+	/* SSC clock / (ssc divider * 16-bit * stereo). */
-+	chip->bitrate = ssc_rate / (ssc_div * 16 * 2);
-+
-+	dev_info(&chip->spi->dev,
-+			"at73c213: supported bitrate is %lu (%lu divider)\n",
-+			chip->bitrate, ssc_div);
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_pcm_open(struct snd_pcm_substream *substream)
-+{
-+	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+
-+	snd_at73c213_playback_hw.rate_min = chip->bitrate;
-+	snd_at73c213_playback_hw.rate_max = chip->bitrate;
-+	runtime->hw = snd_at73c213_playback_hw;
-+	chip->substream = substream;
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_pcm_close(struct snd_pcm_substream *substream)
-+{
-+	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+	chip->substream = NULL;
-+	return 0;
-+}
-+
-+static int snd_at73c213_pcm_hw_params(struct snd_pcm_substream *substream,
-+				 struct snd_pcm_hw_params *hw_params)
-+{
-+	return snd_pcm_lib_malloc_pages(substream,
-+					params_buffer_bytes(hw_params));
-+}
-+
-+static int snd_at73c213_pcm_hw_free(struct snd_pcm_substream *substream)
-+{
-+	return snd_pcm_lib_free_pages(substream);
-+}
-+
-+static int snd_at73c213_pcm_prepare(struct snd_pcm_substream *substream)
-+{
-+	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+	int block_size;
-+
-+	block_size = frames_to_bytes(runtime, runtime->period_size);
-+
-+	chip->period = 0;
-+
-+	ssc_writel(chip->ssc->regs, PDC_TPR,
-+			(long)runtime->dma_addr);
-+	ssc_writel(chip->ssc->regs, PDC_TCR, runtime->period_size * 2);
-+	ssc_writel(chip->ssc->regs, PDC_TNPR,
-+			(long)runtime->dma_addr + block_size);
-+	ssc_writel(chip->ssc->regs, PDC_TNCR, runtime->period_size * 2);
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_pcm_trigger(struct snd_pcm_substream *substream,
-+				   int cmd)
-+{
-+	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+	int retval = 0;
-+
-+	spin_lock(&chip->lock);
-+
-+	switch (cmd) {
-+	case SNDRV_PCM_TRIGGER_START:
-+		ssc_writel(chip->ssc->regs, IER, SSC_BIT(IER_ENDTX));
-+		ssc_writel(chip->ssc->regs, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTEN));
-+		break;
-+	case SNDRV_PCM_TRIGGER_STOP:
-+		ssc_writel(chip->ssc->regs, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTDIS));
-+		ssc_writel(chip->ssc->regs, IDR, SSC_BIT(IDR_ENDTX));
-+		break;
-+	default:
-+		dev_dbg(&chip->spi->dev, "spurious command %x\n", cmd);
-+		retval = -EINVAL;
-+		break;
-+	}
-+
-+	spin_unlock(&chip->lock);
-+
-+	return retval;
-+}
-+
-+static snd_pcm_uframes_t
-+snd_at73c213_pcm_pointer(struct snd_pcm_substream *substream)
-+{
-+	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+	snd_pcm_uframes_t pos;
-+	unsigned long bytes;
-+
-+	bytes = ssc_readl(chip->ssc->regs, PDC_TPR)
-+		- (unsigned long)runtime->dma_addr;
-+
-+	pos = bytes_to_frames(runtime, bytes);
-+	if (pos >= runtime->buffer_size)
-+		pos -= runtime->buffer_size;
-+
-+	return pos;
-+}
-+
-+static struct snd_pcm_ops at73c213_playback_ops = {
-+	.open		= snd_at73c213_pcm_open,
-+	.close		= snd_at73c213_pcm_close,
-+	.ioctl		= snd_pcm_lib_ioctl,
-+	.hw_params	= snd_at73c213_pcm_hw_params,
-+	.hw_free	= snd_at73c213_pcm_hw_free,
-+	.prepare	= snd_at73c213_pcm_prepare,
-+	.trigger	= snd_at73c213_pcm_trigger,
-+	.pointer	= snd_at73c213_pcm_pointer,
-+};
-+
-+static void snd_at73c213_pcm_free(struct snd_pcm *pcm)
-+{
-+	struct snd_at73c213 *chip = snd_pcm_chip(pcm);
-+	if (chip->pcm) {
-+		snd_pcm_lib_preallocate_free_for_all(chip->pcm);
-+		chip->pcm = NULL;
-+	}
-+}
-+
-+static int __devinit snd_at73c213_pcm_new(struct snd_at73c213 *chip, int device)
-+{
-+	struct snd_pcm *pcm;
-+	int retval;
-+
-+	retval = snd_pcm_new(chip->card, chip->card->shortname,
-+			device, 1, 0, &pcm);
-+	if (retval < 0)
-+		goto out;
-+
-+	pcm->private_data = chip;
-+	pcm->private_free = snd_at73c213_pcm_free;
-+	pcm->info_flags = SNDRV_PCM_INFO_BLOCK_TRANSFER;
-+	strcpy(pcm->name, "at73c213");
-+	chip->pcm = pcm;
-+
-+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &at73c213_playback_ops);
-+
-+	retval = snd_pcm_lib_preallocate_pages_for_all(chip->pcm,
-+			SNDRV_DMA_TYPE_DEV, &chip->ssc->pdev->dev,
-+			64 * 1024, 64 * 1024);
-+out:
-+	return retval;
-+}
-+
-+static irqreturn_t snd_at73c213_interrupt(int irq, void *dev_id)
-+{
-+	struct snd_at73c213 *chip = dev_id;
-+	struct snd_pcm_runtime *runtime = chip->substream->runtime;
-+	u32 status;
-+	int offset;
-+	int block_size;
-+	int next_period;
-+	int retval = IRQ_NONE;
-+
-+	spin_lock(&chip->lock);
-+
-+	block_size = frames_to_bytes(runtime, runtime->period_size);
-+	status = ssc_readl(chip->ssc->regs, IMR);
-+
-+	if (status & SSC_BIT(IMR_ENDTX)) {
-+		chip->period++;
-+		if (chip->period == runtime->periods)
-+			chip->period = 0;
-+		next_period = chip->period + 1;
-+		if (next_period == runtime->periods)
-+			next_period = 0;
-+
-+		offset = block_size * next_period;
-+
-+		ssc_writel(chip->ssc->regs, PDC_TNPR,
-+				(long)runtime->dma_addr + offset);
-+		ssc_writel(chip->ssc->regs, PDC_TNCR, runtime->period_size * 2);
-+		retval = IRQ_HANDLED;
-+	}
-+
-+	ssc_readl(chip->ssc->regs, IMR);
-+	spin_unlock(&chip->lock);
-+
-+	if (status & SSC_BIT(IMR_ENDTX))
-+		snd_pcm_period_elapsed(chip->substream);
-+
-+	return retval;
-+}
-+
-+/*
-+ * Mixer functions.
-+ */
-+static int snd_at73c213_mono_get(struct snd_kcontrol *kcontrol,
-+				 struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+	int reg = kcontrol->private_value & 0xff;
-+	int shift = (kcontrol->private_value >> 8) & 0xff;
-+	int mask = (kcontrol->private_value >> 16) & 0xff;
-+	int invert = (kcontrol->private_value >> 24) & 0xff;
-+
-+	spin_lock_irq(&chip->lock);
-+
-+	ucontrol->value.integer.value[0] = (chip->reg_image[reg] >> shift) & mask;
-+
-+	if (invert)
-+		ucontrol->value.integer.value[0] =
-+			(mask - ucontrol->value.integer.value[0]);
-+
-+	spin_unlock_irq(&chip->lock);
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_mono_put(struct snd_kcontrol *kcontrol,
-+				 struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+	int reg = kcontrol->private_value & 0xff;
-+	int shift = (kcontrol->private_value >> 8) & 0xff;
-+	int mask = (kcontrol->private_value >> 16) & 0xff;
-+	int invert = (kcontrol->private_value >> 24) & 0xff;
-+	int change, retval;
-+	unsigned short val;
-+
-+	val = (ucontrol->value.integer.value[0] & mask);
-+	if (invert)
-+		val = mask - val;
-+	val <<= shift;
-+
-+	spin_lock_irq(&chip->lock);
-+
-+	val = (chip->reg_image[reg] & ~(mask << shift)) | val;
-+	change = val != chip->reg_image[reg];
-+	retval = snd_at73c213_write_reg(chip, reg, val);
-+
-+	spin_unlock_irq(&chip->lock);
-+
-+	if (retval)
-+		return retval;
-+
-+	return change;
-+}
-+
-+static int snd_at73c213_stereo_info(struct snd_kcontrol *kcontrol,
-+				  struct snd_ctl_elem_info *uinfo)
-+{
-+	int mask = (kcontrol->private_value >> 24) & 0xff;
-+
-+	if (mask == 1)
-+		uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
-+	else
-+		uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+
-+	uinfo->count = 2;
-+	uinfo->value.integer.min = 0;
-+	uinfo->value.integer.max = mask;
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_stereo_get(struct snd_kcontrol *kcontrol,
-+				 struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+	int left_reg = kcontrol->private_value & 0xff;
-+	int right_reg = (kcontrol->private_value >> 8) & 0xff;
-+	int shift_left = (kcontrol->private_value >> 16) & 0x07;
-+	int shift_right = (kcontrol->private_value >> 19) & 0x07;
-+	int mask = (kcontrol->private_value >> 24) & 0xff;
-+	int invert = (kcontrol->private_value >> 22) & 1;
-+
-+	spin_lock_irq(&chip->lock);
-+
-+	ucontrol->value.integer.value[0] =
-+		(chip->reg_image[left_reg] >> shift_left) & mask;
-+	ucontrol->value.integer.value[1] =
-+		(chip->reg_image[right_reg] >> shift_right) & mask;
-+
-+	if (invert) {
-+		ucontrol->value.integer.value[0] =
-+			(mask - ucontrol->value.integer.value[0]);
-+		ucontrol->value.integer.value[1] =
-+			(mask - ucontrol->value.integer.value[1]);
-+	}
-+
-+	spin_unlock_irq(&chip->lock);
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_stereo_put(struct snd_kcontrol *kcontrol,
-+				 struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+	int left_reg = kcontrol->private_value & 0xff;
-+	int right_reg = (kcontrol->private_value >> 8) & 0xff;
-+	int shift_left = (kcontrol->private_value >> 16) & 0x07;
-+	int shift_right = (kcontrol->private_value >> 19) & 0x07;
-+	int mask = (kcontrol->private_value >> 24) & 0xff;
-+	int invert = (kcontrol->private_value >> 22) & 1;
-+	int change, retval;
-+	unsigned short val1, val2;
-+
-+	val1 = ucontrol->value.integer.value[0] & mask;
-+	val2 = ucontrol->value.integer.value[1] & mask;
-+	if (invert) {
-+		val1 = mask - val1;
-+		val2 = mask - val2;
-+	}
-+	val1 <<= shift_left;
-+	val2 <<= shift_right;
-+
-+	spin_lock_irq(&chip->lock);
-+
-+	val1 = (chip->reg_image[left_reg] & ~(mask << shift_left)) | val1;
-+	val2 = (chip->reg_image[right_reg] & ~(mask << shift_right)) | val2;
-+	change = val1 != chip->reg_image[left_reg]
-+		|| val2 != chip->reg_image[right_reg];
-+	retval = snd_at73c213_write_reg(chip, left_reg, val1);
-+	if (retval) {
-+		spin_unlock_irq(&chip->lock);
-+		goto out;
-+	}
-+	retval = snd_at73c213_write_reg(chip, right_reg, val2);
-+	if (retval) {
-+		spin_unlock_irq(&chip->lock);
-+		goto out;
-+	}
-+
-+	spin_unlock_irq(&chip->lock);
-+
-+	return change;
-+
-+out:
-+	return retval;
-+}
-+
-+static int snd_at73c213_mono_switch_info(struct snd_kcontrol *kcontrol,
-+				  struct snd_ctl_elem_info *uinfo)
-+{
-+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
-+	uinfo->count = 1;
-+	uinfo->value.integer.min = 0;
-+	uinfo->value.integer.max = 1;
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_mono_switch_get(struct snd_kcontrol *kcontrol,
-+				 struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+	int reg = kcontrol->private_value & 0xff;
-+	int shift = (kcontrol->private_value >> 8) & 0xff;
-+	int invert = (kcontrol->private_value >> 24) & 0xff;
-+
-+	spin_lock_irq(&chip->lock);
-+
-+	ucontrol->value.integer.value[0] = (chip->reg_image[reg] >> shift) & 0x01;
-+
-+	if (invert)
-+		ucontrol->value.integer.value[0] =
-+			(0x01 - ucontrol->value.integer.value[0]);
-+
-+	spin_unlock_irq(&chip->lock);
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_mono_switch_put(struct snd_kcontrol *kcontrol,
-+				 struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+	int reg = kcontrol->private_value & 0xff;
-+	int shift = (kcontrol->private_value >> 8) & 0xff;
-+	int mask = (kcontrol->private_value >> 16) & 0xff;
-+	int invert = (kcontrol->private_value >> 24) & 0xff;
-+	int change, retval;
-+	unsigned short val;
-+
-+	if (ucontrol->value.integer.value[0])
-+		val = mask;
-+	else
-+		val = 0;
-+
-+	if (invert)
-+		val = mask - val;
-+	val <<= shift;
-+
-+	spin_lock_irq(&chip->lock);
-+
-+	val |= (chip->reg_image[reg] & ~(mask << shift));
-+	change = val != chip->reg_image[reg];
-+
-+	retval = snd_at73c213_write_reg(chip, reg, val);
-+
-+	spin_unlock_irq(&chip->lock);
-+
-+	if (retval)
-+		return retval;
-+
-+	return change;
-+}
-+
-+static int snd_at73c213_pa_volume_info(struct snd_kcontrol *kcontrol,
-+				  struct snd_ctl_elem_info *uinfo)
-+{
-+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+	uinfo->count = 1;
-+	uinfo->value.integer.min = 0;
-+	uinfo->value.integer.max = ((kcontrol->private_value >> 16) & 0xff) - 1;
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_line_capture_volume_info(
-+		struct snd_kcontrol *kcontrol,
-+		struct snd_ctl_elem_info *uinfo)
-+{
-+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+	uinfo->count = 2;
-+	/* When inverted will give values 0x10001 => 0. */
-+	uinfo->value.integer.min = 14;
-+	uinfo->value.integer.max = 31;
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_aux_capture_volume_info(
-+		struct snd_kcontrol *kcontrol,
-+		struct snd_ctl_elem_info *uinfo)
-+{
-+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+	uinfo->count = 1;
-+	/* When inverted will give values 0x10001 => 0. */
-+	uinfo->value.integer.min = 14;
-+	uinfo->value.integer.max = 31;
-+
-+	return 0;
-+}
-+
-+#define AT73C213_MONO_SWITCH(xname, xindex, reg, shift, mask, invert)	\
-+{									\
-+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,				\
-+	.name = xname,							\
-+	.index = xindex,						\
-+	.info = snd_at73c213_mono_switch_info,				\
-+	.get = snd_at73c213_mono_switch_get,				\
-+	.put = snd_at73c213_mono_switch_put,				\
-+	.private_value = (reg | (shift << 8) | (mask << 16) | (invert << 24)) \
-+}
-+
-+#define AT73C213_STEREO(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert) \
-+{									\
-+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,				\
-+	.name = xname,							\
-+	.index = xindex,						\
-+	.info = snd_at73c213_stereo_info,				\
-+	.get = snd_at73c213_stereo_get,					\
-+	.put = snd_at73c213_stereo_put,					\
-+	.private_value = (left_reg | (right_reg << 8)			\
-+			| (shift_left << 16) | (shift_right << 19)	\
-+			| (mask << 24) | (invert << 22))		\
-+}
-+
-+static struct snd_kcontrol_new snd_at73c213_controls[] __devinitdata = {
-+AT73C213_STEREO("Master Playback Volume", 0, DAC_LMPG, DAC_RMPG, 0, 0, 0x1f, 1),
-+AT73C213_STEREO("Master Playback Switch", 0, DAC_LMPG, DAC_RMPG, 5, 5, 1, 1),
-+AT73C213_STEREO("PCM Playback Volume", 0, DAC_LLOG, DAC_RLOG, 0, 0, 0x1f, 1),
-+AT73C213_STEREO("PCM Playback Switch", 0, DAC_LLOG, DAC_RLOG, 5, 5, 1, 1),
-+AT73C213_MONO_SWITCH("Mono PA Playback Switch", 0, DAC_CTRL, DAC_CTRL_ONPADRV, 0x01, 0),
-+{
-+	.iface	= SNDRV_CTL_ELEM_IFACE_MIXER,
-+	.name	= "PA Playback Volume",
-+	.index	= 0,
-+	.info	= snd_at73c213_pa_volume_info,
-+	.get	= snd_at73c213_mono_get,
-+	.put	= snd_at73c213_mono_put,
-+	.private_value	= PA_CTRL | (PA_CTRL_APAGAIN << 8) | (0x0f << 16) | (1 << 24),
-+},
-+AT73C213_MONO_SWITCH("PA High Gain Playback Switch", 0, PA_CTRL, PA_CTRL_APALP, 0x01, 1),
-+AT73C213_MONO_SWITCH("PA Playback Switch", 0, PA_CTRL, PA_CTRL_APAON, 0x01, 0),
-+{
-+	.iface	= SNDRV_CTL_ELEM_IFACE_MIXER,
-+	.name	= "Aux Capture Volume",
-+	.index	= 0,
-+	.info	= snd_at73c213_aux_capture_volume_info,
-+	.get	= snd_at73c213_mono_get,
-+	.put	= snd_at73c213_mono_put,
-+	.private_value	= DAC_AUXG | (0 << 8) | (0x1f << 16) | (1 << 24),
-+},
-+AT73C213_MONO_SWITCH("Aux Capture Switch", 0, DAC_CTRL, DAC_CTRL_ONAUXIN, 0x01, 0),
-+{
-+	.iface	= SNDRV_CTL_ELEM_IFACE_MIXER,
-+	.name	= "Line Capture Volume",
-+	.index	= 0,
-+	.info	= snd_at73c213_line_capture_volume_info,
-+	.get	= snd_at73c213_stereo_get,
-+	.put	= snd_at73c213_stereo_put,
-+	.private_value	= DAC_LLIG | (DAC_RLIG << 8) | (0 << 16) | (0 << 19)
-+		| (0x1f << 24) | (1 << 22),
-+},
-+AT73C213_MONO_SWITCH("Line Capture Switch", 0, DAC_CTRL, 0, 0x03, 0),
-+};
-+
-+static int __devinit snd_at73c213_mixer(struct snd_at73c213 *chip)
-+{
-+	struct snd_card *card;
-+	int errval, idx;
-+
-+	if (chip == NULL || chip->pcm == NULL)
-+		return -EINVAL;
-+
-+	card = chip->card;
-+
-+	strcpy(card->mixername, chip->pcm->name);
-+
-+	for (idx = 0; idx < ARRAY_SIZE(snd_at73c213_controls); idx++) {
-+		errval = snd_ctl_add(card,
-+				snd_ctl_new1(&snd_at73c213_controls[idx],
-+					chip));
-+		if (errval < 0)
-+			goto cleanup;
-+	}
-+
-+	return 0;
-+
-+cleanup:
-+	for (idx = 1; idx < ARRAY_SIZE(snd_at73c213_controls) + 1; idx++) {
-+		struct snd_kcontrol *kctl;
-+		kctl = snd_ctl_find_numid(card, idx);
-+		if (kctl)
-+			snd_ctl_remove(card, kctl);
-+	}
-+	return errval;
-+}
-+
-+/*
-+ * Device functions
-+ */
-+static int snd_at73c213_ssc_init(struct snd_at73c213 *chip)
-+{
-+	/*
-+	 * Continuous clock output.
-+	 * Starts on falling TF.
-+	 * Delay 1 cycle (1 bit).
-+	 * Periode is 16 bit (16 - 1).
-+	 */
-+	ssc_writel(chip->ssc->regs, TCMR,
-+			SSC_BF(TCMR_CKO, 1)
-+			| SSC_BF(TCMR_START, 4)
-+			| SSC_BF(TCMR_STTDLY, 1)
-+			| SSC_BF(TCMR_PERIOD, 16 - 1));
-+	/*
-+	 * Data length is 16 bit (16 - 1).
-+	 * Transmit MSB first.
-+	 * Transmit 2 words each transfer.
-+	 * Frame sync length is 16 bit (16 - 1).
-+	 * Frame starts on negative pulse.
-+	 */
-+	ssc_writel(chip->ssc->regs, TFMR,
-+			SSC_BF(TFMR_DATLEN, 16 - 1)
-+			| SSC_BIT(TFMR_MSBF)
-+			| SSC_BF(TFMR_DATNB, 1)
-+			| SSC_BF(TFMR_FSLEN, 16 - 1)
-+			| SSC_BF(TFMR_FSOS, 1));
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_chip_init(struct snd_at73c213 *chip)
-+{
-+	int retval;
-+	unsigned char dac_ctrl = 0;
-+
-+	retval = snd_at73c213_set_bitrate(chip);
-+	if (retval)
-+		goto out;
-+
-+	/* Enable DAC master clock. */
-+	clk_enable(chip->board->dac_clk);
-+
-+	/* Initialize at73c213 on SPI bus. */
-+	retval = snd_at73c213_write_reg(chip, DAC_RST, 0x04);
-+	if (retval)
-+		goto out_clk;
-+	msleep(1);
-+	retval = snd_at73c213_write_reg(chip, DAC_RST, 0x03);
-+	if (retval)
-+		goto out_clk;
-+
-+	/* Precharge everything. */
-+	retval = snd_at73c213_write_reg(chip, DAC_PRECH, 0xff);
-+	if (retval)
-+		goto out_clk;
-+	retval = snd_at73c213_write_reg(chip, PA_CTRL, (1<<PA_CTRL_APAPRECH));
-+	if (retval)
-+		goto out_clk;
-+	retval = snd_at73c213_write_reg(chip, DAC_CTRL,
-+			(1<<DAC_CTRL_ONLNOL) | (1<<DAC_CTRL_ONLNOR));
-+	if (retval)
-+		goto out_clk;
-+
-+	msleep(50);
-+
-+	/* Stop precharging PA. */
-+	retval = snd_at73c213_write_reg(chip, PA_CTRL,
-+			(1<<PA_CTRL_APALP) | 0x0f);
-+	if (retval)
-+		goto out_clk;
-+
-+	msleep(450);
-+
-+	/* Stop precharging DAC, turn on master power. */
-+	retval = snd_at73c213_write_reg(chip, DAC_PRECH, (1<<DAC_PRECH_ONMSTR));
-+	if (retval)
-+		goto out_clk;
-+
-+	msleep(1);
-+
-+	/* Turn on DAC. */
-+	dac_ctrl = (1<<DAC_CTRL_ONDACL) | (1<<DAC_CTRL_ONDACR)
-+		| (1<<DAC_CTRL_ONLNOL) | (1<<DAC_CTRL_ONLNOR);
-+
-+	retval = snd_at73c213_write_reg(chip, DAC_CTRL, dac_ctrl);
-+	if (retval)
-+		goto out_clk;
-+
-+	/* Mute sound. */
-+	retval = snd_at73c213_write_reg(chip, DAC_LMPG, 0x3f);
-+	if (retval)
-+		goto out_clk;
-+	retval = snd_at73c213_write_reg(chip, DAC_RMPG, 0x3f);
-+	if (retval)
-+		goto out_clk;
-+	retval = snd_at73c213_write_reg(chip, DAC_LLOG, 0x3f);
-+	if (retval)
-+		goto out_clk;
-+	retval = snd_at73c213_write_reg(chip, DAC_RLOG, 0x3f);
-+	if (retval)
-+		goto out_clk;
-+	retval = snd_at73c213_write_reg(chip, DAC_LLIG, 0x11);
-+	if (retval)
-+		goto out_clk;
-+	retval = snd_at73c213_write_reg(chip, DAC_RLIG, 0x11);
-+	if (retval)
-+		goto out_clk;
-+	retval = snd_at73c213_write_reg(chip, DAC_AUXG, 0x11);
-+	if (retval)
-+		goto out_clk;
-+
-+	/* Enable I2S device, i.e. clock output. */
-+	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXEN));
-+
-+	goto out;
-+
-+out_clk:
-+	clk_disable(chip->board->dac_clk);
-+out:
-+	return retval;
-+}
-+
-+static int snd_at73c213_dev_free(struct snd_device *device)
-+{
-+	struct snd_at73c213 *chip = device->device_data;
-+
-+	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
-+	if (chip->irq >= 0) {
-+		free_irq(chip->irq, chip);
-+		chip->irq = -1;
-+	}
-+
-+	return 0;
-+}
-+
-+static int __devinit snd_at73c213_dev_init(struct snd_card *card,
-+					 struct spi_device *spi)
-+{
-+	static struct snd_device_ops ops = {
-+		.dev_free	= snd_at73c213_dev_free,
-+	};
-+	struct snd_at73c213 *chip = get_chip(card);
-+	int irq, retval;
-+
-+	irq = chip->ssc->irq;
-+	if (irq < 0)
-+		return irq;
-+
-+	spin_lock_init(&chip->lock);
-+	chip->card = card;
-+	chip->irq = -1;
-+
-+	retval = request_irq(irq, snd_at73c213_interrupt, 0, "at73c213", chip);
-+	if (retval) {
-+		dev_dbg(&chip->spi->dev, "unable to request irq %d\n", irq);
-+		goto out;
-+	}
-+	chip->irq = irq;
-+
-+	memcpy(&chip->reg_image, &snd_at73c213_original_image,
-+			sizeof(snd_at73c213_original_image));
-+
-+	retval = snd_at73c213_ssc_init(chip);
-+	if (retval)
-+		goto out_irq;
-+
-+	retval = snd_at73c213_chip_init(chip);
-+	if (retval)
-+		goto out_irq;
-+
-+	retval = snd_at73c213_pcm_new(chip, 0);
-+	if (retval)
-+		goto out_irq;
-+
-+	retval = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
-+	if (retval)
-+		goto out_irq;
-+
-+	retval = snd_at73c213_mixer(chip);
-+	if (retval)
-+		goto out_snd_dev;
-+
-+	snd_card_set_dev(card, &spi->dev);
-+
-+	goto out;
-+
-+out_snd_dev:
-+	snd_device_free(card, chip);
-+out_irq:
-+	free_irq(chip->irq, chip);
-+	chip->irq = -1;
-+out:
-+	return retval;
-+}
-+
-+static int snd_at73c213_probe(struct spi_device *spi)
-+{
-+	struct snd_card			*card;
-+	struct snd_at73c213		*chip;
-+	struct at73c213_board_info	*board;
-+	int				retval;
-+	char				id[16];
-+
-+	board = spi->dev.platform_data;
-+	if (!board) {
-+		dev_dbg(&spi->dev, "no platform_data\n");
-+		return -ENXIO;
-+	}
-+
-+	if (!board->dac_clk) {
-+		dev_dbg(&spi->dev, "no DAC clk\n");
-+		return -ENXIO;
-+	}
-+
-+	if (IS_ERR(board->dac_clk)) {
-+		dev_dbg(&spi->dev, "no DAC clk\n");
-+		return PTR_ERR(board->dac_clk);
-+	}
-+
-+	retval = -ENOMEM;
-+
-+	/* Allocate "card" using some unused identifiers. */
-+	snprintf(id, sizeof id, "at73c213_%d", board->ssc_id);
-+	card = snd_card_new(-1, id, THIS_MODULE, sizeof(struct snd_at73c213));
-+	if (!card)
-+		goto out;
-+
-+	chip = card->private_data;
-+	chip->spi = spi;
-+	chip->board = board;
-+
-+	chip->ssc = ssc_request(board->ssc_id);
-+	if (IS_ERR(chip->ssc)) {
-+		dev_dbg(&spi->dev, "could not get ssc%d device\n",
-+				board->ssc_id);
-+		retval = PTR_ERR(chip->ssc);
-+		goto out_card;
-+	}
-+
-+	retval = snd_at73c213_dev_init(card, spi);
-+	if (retval)
-+		goto out_ssc;
-+
-+	strcpy(card->driver, "at73c213");
-+	strcpy(card->shortname, board->shortname);
-+	sprintf(card->longname, "%s on irq %d", card->shortname, chip->irq);
-+
-+	retval = snd_card_register(card);
-+	if (retval)
-+		goto out_ssc;
-+
-+	dev_set_drvdata(&spi->dev, card);
-+
-+	goto out;
-+
-+out_ssc:
-+	ssc_free(chip->ssc);
-+out_card:
-+	snd_card_free(card);
-+out:
-+	return retval;
-+}
-+
-+static int __devexit snd_at73c213_remove(struct spi_device *spi)
-+{
-+	struct snd_card *card = dev_get_drvdata(&spi->dev);
-+	struct snd_at73c213 *chip = card->private_data;
-+	int retval;
-+
-+	/* Stop playback. */
-+	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
-+
-+	/* Mute sound. */
-+	retval = snd_at73c213_write_reg(chip, DAC_LMPG, 0x3f);
-+	if (retval)
-+		goto out;
-+	retval = snd_at73c213_write_reg(chip, DAC_RMPG, 0x3f);
-+	if (retval)
-+		goto out;
-+	retval = snd_at73c213_write_reg(chip, DAC_LLOG, 0x3f);
-+	if (retval)
-+		goto out;
-+	retval = snd_at73c213_write_reg(chip, DAC_RLOG, 0x3f);
-+	if (retval)
-+		goto out;
-+	retval = snd_at73c213_write_reg(chip, DAC_LLIG, 0x11);
-+	if (retval)
-+		goto out;
-+	retval = snd_at73c213_write_reg(chip, DAC_RLIG, 0x11);
-+	if (retval)
-+		goto out;
-+	retval = snd_at73c213_write_reg(chip, DAC_AUXG, 0x11);
-+	if (retval)
-+		goto out;
-+
-+	/* Turn off PA. */
-+	retval = snd_at73c213_write_reg(chip, PA_CTRL, (chip->reg_image[PA_CTRL]|0x0f));
-+	if (retval)
-+		goto out;
-+	msleep(10);
-+	retval = snd_at73c213_write_reg(chip, PA_CTRL, (1<<PA_CTRL_APALP)|0x0f);
-+	if (retval)
-+		goto out;
-+
-+	/* Turn off external DAC. */
-+	retval = snd_at73c213_write_reg(chip, DAC_CTRL, 0x0c);
-+	if (retval)
-+		goto out;
-+	msleep(2);
-+	retval = snd_at73c213_write_reg(chip, DAC_CTRL, 0x00);
-+	if (retval)
-+		goto out;
-+
-+	/* Turn off master power. */
-+	retval = snd_at73c213_write_reg(chip, DAC_PRECH, 0x00);
-+	if (retval)
-+		goto out;
-+
-+out:
-+	/* Stop DAC master clock. */
-+	clk_disable(chip->board->dac_clk);
-+
-+	ssc_free(chip->ssc);
-+	snd_card_free(card);
-+	dev_set_drvdata(&spi->dev, NULL);
-+
-+	return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int snd_at73c213_suspend(struct spi_device *spi, pm_message_t msg)
-+{
-+	struct snd_card *card = dev_get_drvdata(&spi->dev);
-+	struct snd_at73c213 *chip = card->private_data;
-+
-+	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
-+	clk_disable(chip->board->dac_clk);
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_resume(struct spi_device *spi)
-+{
-+	struct snd_card *card = dev_get_drvdata(&spi->dev);
-+	struct snd_at73c213 *chip = card->private_data;
-+
-+	clk_enable(chip->board->dac_clk);
-+	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXEN));
-+
-+	return 0;
-+}
-+#else
-+#define snd_at73c213_suspend NULL
-+#define snd_at73c213_resume NULL
-+#endif
-+
-+static struct spi_driver at73c213_driver = {
-+	.driver		= {
-+		.name	= "at73c213",
-+	},
-+	.probe		= snd_at73c213_probe,
-+	.suspend	= snd_at73c213_suspend,
-+	.resume		= snd_at73c213_resume,
-+	.remove		= __devexit_p(snd_at73c213_remove),
-+};
-+
-+static int __init at73c213_init(void)
-+{
-+	return spi_register_driver(&at73c213_driver);
-+}
-+module_init(at73c213_init);
-+
-+static void __exit at73c213_exit(void)
-+{
-+	spi_unregister_driver(&at73c213_driver);
-+}
-+module_exit(at73c213_exit);
-+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("Sound driver for AT73C213 with Atmel SSC");
-+MODULE_LICENSE("GPL");
-diff --git a/sound/spi/at73c213.h b/sound/spi/at73c213.h
-new file mode 100644
-index 0000000..fd8b372
---- /dev/null
-+++ b/sound/spi/at73c213.h
-@@ -0,0 +1,119 @@
-+/*
-+ * Driver for the AT73C213 16-bit stereo DAC on Atmel ATSTK1000
-+ *
-+ * Copyright (C) 2006 - 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-+ * 02111-1307, USA.
-+ *
-+ * The full GNU General Public License is included in this
-+ * distribution in the file called COPYING.
-+ */
-+
-+#ifndef _SND_AT73C213_H
-+#define _SND_AT73C213_H
-+
-+/* DAC control register */
-+#define DAC_CTRL		0x00
-+#define DAC_CTRL_ONPADRV	7
-+#define DAC_CTRL_ONAUXIN	6
-+#define DAC_CTRL_ONDACR		5
-+#define DAC_CTRL_ONDACL		4
-+#define DAC_CTRL_ONLNOR		3
-+#define DAC_CTRL_ONLNOL		2
-+#define DAC_CTRL_ONLNIR		1
-+#define DAC_CTRL_ONLNIL		0
-+
-+/* DAC left line in gain register */
-+#define DAC_LLIG		0x01
-+#define DAC_LLIG_LLIG		0
-+
-+/* DAC right line in gain register */
-+#define DAC_RLIG		0x02
-+#define DAC_RLIG_RLIG		0
-+
-+/* DAC Left Master Playback Gain Register */
-+#define DAC_LMPG		0x03
-+#define DAC_LMPG_LMPG		0
-+
-+/* DAC Right Master Playback Gain Register */
-+#define DAC_RMPG		0x04
-+#define DAC_RMPG_RMPG		0
-+
-+/* DAC Left Line Out Gain Register */
-+#define DAC_LLOG		0x05
-+#define DAC_LLOG_LLOG		0
-+
-+/* DAC Right Line Out Gain Register */
-+#define DAC_RLOG		0x06
-+#define DAC_RLOG_RLOG		0
-+
-+/* DAC Output Level Control Register */
-+#define DAC_OLC			0x07
-+#define DAC_OLC_RSHORT		7
-+#define DAC_OLC_ROLC		4
-+#define DAC_OLC_LSHORT		3
-+#define DAC_OLC_LOLC		0
-+
-+/* DAC Mixer Control Register */
-+#define DAC_MC			0x08
-+#define DAC_MC_INVR		5
-+#define DAC_MC_INVL		4
-+#define DAC_MC_RMSMIN2		3
-+#define DAC_MC_RMSMIN1		2
-+#define DAC_MC_LMSMIN2		1
-+#define DAC_MC_LMSMIN1		0
-+
-+/* DAC Clock and Sampling Frequency Control Register */
-+#define DAC_CSFC		0x09
-+#define DAC_CSFC_OVRSEL		4
-+
-+/* DAC Miscellaneous Register */
-+#define DAC_MISC		0x0A
-+#define DAC_MISC_VCMCAPSEL	7
-+#define DAC_MISC_DINTSEL	4
-+#define DAC_MISC_DITHEN		3
-+#define DAC_MISC_DEEMPEN	2
-+#define DAC_MISC_NBITS		0
-+
-+/* DAC Precharge Control Register */
-+#define DAC_PRECH		0x0C
-+#define DAC_PRECH_PRCHGPDRV	7
-+#define DAC_PRECH_PRCHGAUX1	6
-+#define DAC_PRECH_PRCHGLNOR	5
-+#define DAC_PRECH_PRCHGLNOL	4
-+#define DAC_PRECH_PRCHGLNIR	3
-+#define DAC_PRECH_PRCHGLNIL	2
-+#define DAC_PRECH_PRCHG		1
-+#define DAC_PRECH_ONMSTR	0
-+
-+/* DAC Auxiliary Input Gain Control Register */
-+#define DAC_AUXG		0x0D
-+#define DAC_AUXG_AUXG		0
-+
-+/* DAC Reset Register */
-+#define DAC_RST			0x10
-+#define DAC_RST_RESMASK		2
-+#define DAC_RST_RESFILZ		1
-+#define DAC_RST_RSTZ		0
-+
-+/* Power Amplifier Control Register */
-+#define PA_CTRL			0x11
-+#define PA_CTRL_APAON		6
-+#define PA_CTRL_APAPRECH	5
-+#define PA_CTRL_APALP		4
-+#define PA_CTRL_APAGAIN		0
-+
-+#endif /* _SND_AT73C213_H */