aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authordissent1 <be.dissent+github@gmail.com>2016-09-26 15:18:37 -0400
committerJohn Crispin <john@phrozen.org>2016-09-30 10:15:23 +0200
commiteb7307cb943bfe4f10fa2f77abbe71dfcbbb3601 (patch)
tree755dfea6b554b7516d0c45a7b8d7dd6945b010b8 /target/linux
parent71370d2c5543b3073653b601aba26078fdbab682 (diff)
downloadupstream-eb7307cb943bfe4f10fa2f77abbe71dfcbbb3601.tar.gz
upstream-eb7307cb943bfe4f10fa2f77abbe71dfcbbb3601.tar.bz2
upstream-eb7307cb943bfe4f10fa2f77abbe71dfcbbb3601.zip
ipq806x: update Netgear R7800 device tree
-add spi pins -move mdio and rgmii pinctrl from gmac and mdio into pinmux node -add i2c4 pinctrl into rpm node -add pin details into several nodes -update gmac1 and gmac2 parameters -update mdio phy0 and phy4 registers by ddwrt devs findings -fix i2c4 pin drive-strengh -remove pcie pins as it's already present in ipq8065 DT Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ipq806x/config-4.42
-rw-r--r--target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts114
-rw-r--r--target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi303
-rw-r--r--target/linux/ipq806x/patches-4.4/168-ARM-qcom-add-smb208-DT.patch70
4 files changed, 308 insertions, 181 deletions
diff --git a/target/linux/ipq806x/config-4.4 b/target/linux/ipq806x/config-4.4
index c410fb65af..bc040497cb 100644
--- a/target/linux/ipq806x/config-4.4
+++ b/target/linux/ipq806x/config-4.4
@@ -301,6 +301,7 @@ CONFIG_NO_HZ=y
CONFIG_NO_HZ_COMMON=y
CONFIG_NO_HZ_IDLE=y
CONFIG_NR_CPUS=4
+CONFIG_NVMEM=y
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
@@ -372,6 +373,7 @@ CONFIG_QCOM_GDSC=y
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_HFPLL=y
# CONFIG_QCOM_PM is not set
+CONFIG_QCOM_QFPROM=y
CONFIG_QCOM_SCM=y
CONFIG_QCOM_SCM_32=y
# CONFIG_QCOM_SMD is not set
diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
index 52ca92a47f..d4ccab47fc 100644
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
+++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
@@ -33,25 +33,13 @@
soc {
pinmux@800000 {
- i2c4_pins: i2c4_pinmux {
- pins = "gpio12", "gpio13";
- function = "gsbi4";
- bias-disable;
- };
-
- pcie0_pins: pcie0_pinmux {
- mux {
- pins = "gpio3";
- function = "pcie1_rst";
- drive-strength = <12>;
- bias-disable;
- };
- };
+ pinctrl-0 = <&mdio0_pins &rgmii2_pins>;
+ pinctrl-names = "default";
- pcie1_pins: pcie1_pinmux {
+ i2c4_pins: i2c4_pinmux {
mux {
- pins = "gpio48";
- function = "pcie2_rst";
+ pins = "gpio12", "gpio13";
+ function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
@@ -87,6 +75,11 @@
drive-strength = <8>;
bias-disable;
};
+
+ clk {
+ pins = "gpio1";
+ input-disable;
+ };
};
rgmii2_pins: rgmii2_pins {
@@ -97,6 +90,25 @@
drive-strength = <8>;
bias-disable;
};
+
+ tx {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
+ input-disable;
+ };
+ };
+
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19", "gpio21";
+ function = "gsbi5";
+ drive-strength = <10>;
+ bias-none;
+ };
+
+ cs {
+ pins = "gpio20";
+ drive-strength = <12>;
+ };
};
};
@@ -114,6 +126,30 @@
*/
};
+ gsbi5: gsbi@1a200000 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "ok";
+
+ spi4: spi@1a280000 {
+ status = "ok";
+ spi-max-frequency = <50000000>;
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 0>;
+
+ flash: m25p80@0 {
+ compatible = "s25fl512s";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <51200000>;
+ reg = <0>;
+
+ linux,part-probe = "qcom-smem";
+ };
+ };
+ };
+
sata-phy@1b400000 {
status = "ok";
};
@@ -236,8 +272,6 @@
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
phy0: ethernet-phy@0 {
device_type = "ethernet-phy";
@@ -246,16 +280,34 @@
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
- 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
+ 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
+ 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
+ 0x00978 0x19008643 /* QM_PORT1_CTRL0 */
+ 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
+ 0x00980 0x19008643 /* QM_PORT2_CTRL0 */
+ 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
+ 0x00988 0x19008643 /* QM_PORT3_CTRL0 */
+ 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
+ 0x00990 0x19008643 /* QM_PORT4_CTRL0 */
+ 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
+ 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
+ 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
+ 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
+ 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
>;
};
phy4: ethernet-phy@4 {
device_type = "ethernet-phy";
reg = <4>;
+ qca,ar8327-initvals = <
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x0000c 0x80 /* PAD6_MODE */
+ >;
};
};
@@ -263,9 +315,13 @@
status = "ok";
phy-mode = "rgmii";
qcom,id = <1>;
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
+ qcom,phy_mdio_addr = <4>;
+ qcom,poll_required = <0>;
+ qcom,rgmii_delay = <1>;
+ qcom,phy_mii_type = <0>;
+ qcom,emulation = <0>;
+ qcom,irq = <255>;
+ mdiobus = <&mdio0>;
mtd-mac-address = <&art 6>;
@@ -279,6 +335,13 @@
status = "ok";
phy-mode = "sgmii";
qcom,id = <2>;
+ qcom,phy_mdio_addr = <0>; /* none */
+ qcom,poll_required = <0>; /* no polling */
+ qcom,rgmii_delay = <0>;
+ qcom,phy_mii_type = <1>;
+ qcom,emulation = <0>;
+ qcom,irq = <258>;
+ mdiobus = <&mdio0>;
mtd-mac-address = <&art 0>;
@@ -287,6 +350,11 @@
full-duplex;
};
};
+
+ rpm@108000 {
+ pinctrl-0 = <&i2c4_pins>;
+ pinctrl-names = "default";
+ };
};
gpio-keys {
diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
index 4571ef4934..42281c4d54 100644
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
+++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
@@ -2,6 +2,7 @@
#include "skeleton.dtsi"
#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+#include <dt-bindings/clock/qcom,lcc-ipq806x.h>
#include <dt-bindings/mfd/qcom-rpm.h>
#include <dt-bindings/soc/qcom,gsbi.h>
#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
@@ -27,6 +28,7 @@
qcom,saw = <&saw0>;
clocks = <&kraitcc 0>;
clock-names = "cpu";
+ qcom,imem = <&imem>;
clock-latency = <100000>;
core-supply = <&smb208_s2a>;
voltage-tolerance = <5>;
@@ -109,8 +111,12 @@
qcom,saw = <&saw1>;
clocks = <&kraitcc 1>;
clock-names = "cpu";
+ qcom,imem = <&imem>;
clock-latency = <100000>;
core-supply = <&smb208_s2b>;
+ cooling-min-state = <0>;
+ cooling-max-state = <10>;
+ #cooling-cells = <2>;
operating-points-0-0 = <
/* kHz uV */
@@ -175,9 +181,6 @@
600000 800000
384000 775000
>;
- cooling-min-state = <0>;
- cooling-max-state = <10>;
- #cooling-cells = <2>;
};
L2: l2-cache {
@@ -288,11 +291,27 @@
ranges;
compatible = "simple-bus";
+ lpass@28100000 {
+ compatible = "qcom,lpass-cpu";
+ status = "disabled";
+ clocks = <&lcc AHBIX_CLK>,
+ <&lcc MI2S_OSR_CLK>,
+ <&lcc MI2S_BIT_CLK>;
+ clock-names = "ahbix-clk",
+ "mi2s-osr-clk",
+ "mi2s-bit-clk";
+ interrupts = <0 85 1>;
+ interrupt-names = "lpass-irq-lpaif";
+ reg = <0x28100000 0x10000>;
+ reg-names = "lpass-lpaif";
+ };
+
imem: memory@700000 {
- compatible = "qcom,imem-ipq8064", "syscon";
+ compatible = "qcom,qfprom", "syscon";
reg = <0x00700000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
+ stride = <1>;
ranges = <0x0 0x00700000 0x1000>;
};
@@ -311,99 +330,74 @@
#address-cells = <1>;
#size-cells = <0>;
- smb208_s1a: smb208-s1a {
- compatible = "qcom,rpm-smb208";
- reg = <QCOM_RPM_SMB208_S1a>;
-
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1150000>;
-
- qcom,switch-mode-frequency = <1200000>;
-
- };
-
- smb208_s1b: smb208-s1b {
- compatible = "qcom,rpm-smb208";
- reg = <QCOM_RPM_SMB208_S1b>;
-
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1150000>;
-
- qcom,switch-mode-frequency = <1200000>;
- };
-
- smb208_s2a: smb208-s2a {
- compatible = "qcom,rpm-smb208";
- reg = <QCOM_RPM_SMB208_S2a>;
+ smb208_regulators {
+ compatible = "qcom,rpm-smb208-regulators";
- regulator-min-microvolt = < 800000>;
- regulator-max-microvolt = <1275000>;
-
- qcom,switch-mode-frequency = <1400000>;
- };
+ smb208_s1a: s1a {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1150000>;
+ qcom,switch-mode-frequency = <1200000>;
+ };
- smb208_s2b: smb208-s2b {
- compatible = "qcom,rpm-smb208";
- reg = <QCOM_RPM_SMB208_S2b>;
+ smb208_s1b: s1b {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1150000>;
+ qcom,switch-mode-frequency = <1200000>;
+ };
- regulator-min-microvolt = < 800000>;
- regulator-max-microvolt = <1275000>;
+ smb208_s2a: s2a {
+ regulator-min-microvolt = < 800000>;
+ regulator-max-microvolt = <1275000>;
+ qcom,switch-mode-frequency = <1200000>;
+ };
- qcom,switch-mode-frequency = <1400000>;
+ smb208_s2b: s2b {
+ regulator-min-microvolt = < 800000>;
+ regulator-max-microvolt = <1275000>;
+ qcom,switch-mode-frequency = <1200000>;
+ };
};
- cxo_clk: cxo-clk {
+ rpm_clocks {
#clock-cells = <0>;
compatible = "qcom,rpm-clk";
- reg = <QCOM_RPM_CXO_CLK>;
- qcom,rpm-clk-name = "cxo";
- qcom,rpm-clk-freq = <25000000>;
qcom,rpm-clk-active-only;
- };
- pxo_clk: pxo-clk {
- #clock-cells = <0>;
- compatible = "qcom,rpm-clk";
- reg = <QCOM_RPM_PXO_CLK>;
- qcom,rpm-clk-name = "pxo";
- qcom,rpm-clk-freq = <25000000>;
- qcom,rpm-clk-active-only;
- };
+ cxo_clk: cxo {
+ reg = <QCOM_RPM_CXO_CLK>;
+ qcom,rpm-clk-name = "cxo";
+ qcom,rpm-clk-freq = <25000000>;
+ };
- ebi1_clk: ebi1-clk {
- #clock-cells = <0>;
- compatible = "qcom,rpm-clk";
- reg = <QCOM_RPM_EBI1_CLK>;
- qcom,rpm-clk-name = "ebi1";
- qcom,rpm-clk-freq = <533000000>;
- qcom,rpm-clk-active-only;
- };
+ pxo_clk: pxo {
+ reg = <QCOM_RPM_PXO_CLK>;
+ qcom,rpm-clk-name = "pxo";
+ qcom,rpm-clk-freq = <25000000>;
+ };
- apps_fabric_clk: apps-fabric-clk {
- #clock-cells = <0>;
- compatible = "qcom,rpm-clk";
- reg = <QCOM_RPM_APPS_FABRIC_CLK>;
- qcom,rpm-clk-name = "apps-fabric";
- qcom,rpm-clk-freq = <533000000>;
- qcom,rpm-clk-active-only;
- };
+ ebi1_clk: ebi1 {
+ reg = <QCOM_RPM_EBI1_CLK>;
+ qcom,rpm-clk-name = "ebi1";
+ qcom,rpm-clk-freq = <533000000>;
+ };
- nss_fabric0_clk: nss-fabric0-clk {
- #clock-cells = <0>;
- compatible = "qcom,rpm-clk";
- reg = <QCOM_RPM_NSS_FABRIC_0_CLK>;
- qcom,rpm-clk-name = "nss-fabric0";
- qcom,rpm-clk-freq = <533000000>;
- qcom,rpm-clk-active-only;
- };
+ apps_fabric_clk: apps-fabric {
+ reg = <QCOM_RPM_APPS_FABRIC_CLK>;
+ qcom,rpm-clk-name = "apps-fabric";
+ qcom,rpm-clk-freq = <533000000>;
+ };
- nss_fabric1_clk: nss-fabric1-clk {
- #clock-cells = <0>;
- compatible = "qcom,rpm-clk";
- reg = <QCOM_RPM_NSS_FABRIC_1_CLK>;
- qcom,rpm-clk-name = "nss-fabric1";
- qcom,rpm-clk-freq = <266000000>;
- qcom,rpm-clk-active-only;
+ nss_fabric0_clk: nss-fabric0 {
+ reg = <QCOM_RPM_NSS_FABRIC_0_CLK>;
+ qcom,rpm-clk-name = "nss-fabric0";
+ qcom,rpm-clk-freq = <533000000>;
+ };
+
+ nss_fabric1_clk: nss-fabric1 {
+ reg = <QCOM_RPM_NSS_FABRIC_1_CLK>;
+ qcom,rpm-clk-name = "nss-fabric1";
+ qcom,rpm-clk-freq = <266000000>;
+ };
};
};
@@ -445,7 +439,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <0 32 0x4>;
+ interrupts = <0 16 0x4>;
pcie0_pins: pcie0_pinmux {
mux {
@@ -528,6 +522,44 @@
regulator;
};
+ gsbi1: gsbi@12440000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <1>;
+ reg = <0x12440000 0x100>;
+ clocks = <&gcc GSBI1_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ syscon-tcsr = <&tcsr>;
+
+ uart1: serial@12450000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x12450000 0x1000>,
+ <0x12440000 0x1000>;
+ interrupts = <0 193 0x0>;
+ clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ i2c@12460000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x12460000 0x1000>;
+ interrupts = <0 194 0>;
+
+ clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ };
+
gsbi2: gsbi@12480000 {
compatible = "qcom,gsbi-v1.0.0";
cell-index = <2>;
@@ -653,6 +685,94 @@
};
};
+ gsbi6: gsbi@16500000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <6>;
+ reg = <0x16500000 0x100>;
+ clocks = <&gcc GSBI6_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ syscon-tcsr = <&tcsr>;
+
+ uart6: serial@16540000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x16540000 0x1000>,
+ <0x16500000 0x1000>;
+ interrupts = <0 156 0x0>;
+ clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ i2c@16580000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x16580000 0x1000>;
+ interrupts = <0 157 0>;
+
+ clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi@16580000 {
+ compatible = "qcom,spi-qup-v1.1.1";
+ reg = <0x16580000 0x1000>;
+ interrupts = <0 157 0>;
+
+ clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ gsbi7: gsbi@16600000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <7>;
+ reg = <0x16600000 0x100>;
+ clocks = <&gcc GSBI7_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ syscon-tcsr = <&tcsr>;
+
+ uart7: serial@16640000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x16640000 0x1000>,
+ <0x16600000 0x1000>;
+ interrupts = <0 158 0x0>;
+ clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ i2c@16680000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x16680000 0x1000>;
+ interrupts = <0 159 0>;
+
+ clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ };
+
sata_phy: sata-phy@1b400000 {
compatible = "qcom,ipq806x-sata-phy";
reg = <0x1b400000 0x200>;
@@ -699,6 +819,13 @@
#reset-cells = <1>;
};
+ lcc: clock-controller@28000000 {
+ compatible = "qcom,lcc-ipq8064";
+ reg = <0x28000000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
tcsr: syscon@1a400000 {
compatible = "qcom,tcsr-ipq8064", "syscon";
reg = <0x1a400000 0x100>;
@@ -1021,7 +1148,7 @@
gmac0: ethernet@37000000 {
device_type = "network";
- compatible = "qcom,ipq806x-gmac";
+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
reg = <0x37000000 0x200000>;
interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
@@ -1040,7 +1167,7 @@
gmac1: ethernet@37200000 {
device_type = "network";
- compatible = "qcom,ipq806x-gmac";
+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
reg = <0x37200000 0x200000>;
interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
@@ -1059,7 +1186,7 @@
gmac2: ethernet@37400000 {
device_type = "network";
- compatible = "qcom,ipq806x-gmac";
+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
reg = <0x37400000 0x200000>;
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
@@ -1078,7 +1205,7 @@
gmac3: ethernet@37600000 {
device_type = "network";
- compatible = "qcom,ipq806x-gmac";
+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
reg = <0x37600000 0x200000>;
interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
diff --git a/target/linux/ipq806x/patches-4.4/168-ARM-qcom-add-smb208-DT.patch b/target/linux/ipq806x/patches-4.4/168-ARM-qcom-add-smb208-DT.patch
index 17596b451a..a3a0583f29 100644
--- a/target/linux/ipq806x/patches-4.4/168-ARM-qcom-add-smb208-DT.patch
+++ b/target/linux/ipq806x/patches-4.4/168-ARM-qcom-add-smb208-DT.patch
@@ -72,73 +72,3 @@ Signed-off-by: Adrian Panella <ianchi74@outlook.com>
};
};
---- a/arch/arm/boot/dts/qcom-ipq8065.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8065.dtsi
-@@ -311,45 +311,37 @@
- #address-cells = <1>;
- #size-cells = <0>;
-
-- smb208_s1a: smb208-s1a {
-- compatible = "qcom,rpm-smb208";
-- reg = <QCOM_RPM_SMB208_S1a>;
-+ regulators {
-+ compatible = "qcom,rpm-smb208-regulators";
-
-- regulator-min-microvolt = <1050000>;
-- regulator-max-microvolt = <1150000>;
-+ smb208_s1a: s1a {
-+ regulator-min-microvolt = <1050000>;
-+ regulator-max-microvolt = <1150000>;
-
-- qcom,switch-mode-frequency = <1200000>;
-+ qcom,switch-mode-frequency = <1200000>;
-
-- };
--
-- smb208_s1b: smb208-s1b {
-- compatible = "qcom,rpm-smb208";
-- reg = <QCOM_RPM_SMB208_S1b>;
--
-- regulator-min-microvolt = <1050000>;
-- regulator-max-microvolt = <1150000>;
-+ };
-
-- qcom,switch-mode-frequency = <1200000>;
-- };
--
-- smb208_s2a: smb208-s2a {
-- compatible = "qcom,rpm-smb208";
-- reg = <QCOM_RPM_SMB208_S2a>;
-+ smb208_s1b: s1b {
-+ regulator-min-microvolt = <1050000>;
-+ regulator-max-microvolt = <1150000>;
-
-- regulator-min-microvolt = < 800000>;
-- regulator-max-microvolt = <1275000>;
-+ qcom,switch-mode-frequency = <1200000>;
-+ };
-
-- qcom,switch-mode-frequency = <1400000>;
-- };
-+ smb208_s2a: s2a {
-+ regulator-min-microvolt = < 800000>;
-+ regulator-max-microvolt = <1275000>;
-
-- smb208_s2b: smb208-s2b {
-- compatible = "qcom,rpm-smb208";
-- reg = <QCOM_RPM_SMB208_S2b>;
-+ qcom,switch-mode-frequency = <1200000>;
-+ };
-
-- regulator-min-microvolt = < 800000>;
-- regulator-max-microvolt = <1275000>;
-+ smb208_s2b: s2b {
-+ regulator-min-microvolt = < 800000>;
-+ regulator-max-microvolt = <1275000>;
-
-- qcom,switch-mode-frequency = <1400000>;
-+ qcom,switch-mode-frequency = <1200000>;
-+ };
- };
-
- cxo_clk: cxo-clk {