aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorMarkus Scheck <markus.scheck1@gmail.com>2019-03-21 16:43:27 +0100
committerPetr Štetiar <ynezz@true.cz>2019-04-08 18:37:04 +0200
commitde2f888024ac58c6137959ea91f65cb6ad098df3 (patch)
tree4076d00fbe67b6fa4d65a9594ff86acd78ead23f /target/linux
parent189aa1748b2655baab54ac5ec45674281dcbb224 (diff)
downloadupstream-de2f888024ac58c6137959ea91f65cb6ad098df3.tar.gz
upstream-de2f888024ac58c6137959ea91f65cb6ad098df3.tar.bz2
upstream-de2f888024ac58c6137959ea91f65cb6ad098df3.zip
ath79: add support for OCEDO Ursus
SOC: Qualcomm Atheros QCA9558 RAM: 128MB FLASH: 16MB (Macronix MX25L12845EMI-10G) WLAN1: QCA9558 2.4GHz 802.11bgn 3SS WLAN2: QCA9880 5GHz 802.11ac 3SS LED: Power, LAN1, LAN2, 2.4GHz, 5GHz Serial:Next to SPI Flash, Pinout is 3V3 - GND - TX - RX (Square Pin is 3V3) The Serial setting is 115200-8-N-1 INSTALLATION: 1. Serve an OpenWrt ramdisk image named "ursus.bin". Set your IP-address to 192.168.100.8/24. 2. Connect to the serial. Power up the device and interrupt the boot process. 3. Set the correct bootcmd with > setenv bootcmd run bootcmd_1 > saveenv 4. Run > tftpboot 0x81000000 ursus.bin > bootm 0x81000000 5. Wait for OpenWrt to boot up. 6. Transfer OpenWrt sysupdate image and flash via sysupgrade. Signed-off-by: Markus Scheck <markus.scheck1@gmail.com> Tested-by: David Bauer <mail@david-bauer.net> [whitespace fix, renamed LED labels and SoC type fix] Signed-off-by: Petr Štetiar <ynezz@true.cz>
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network3
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata3
-rw-r--r--target/linux/ath79/dts/qca9558_ocedo_ursus.dts147
-rw-r--r--target/linux/ath79/image/generic.mk9
4 files changed, 160 insertions, 2 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index e0b777da73..e399210b2b 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -79,7 +79,8 @@ ath79_setup_interfaces()
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
devolo,dvl1200e|\
- devolo,dvl1750e)
+ devolo,dvl1750e|\
+ ocedo,ursus)
ucidef_set_interface_lan "eth0 eth1"
;;
dlink,dir-825-b1)
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 8766862bb6..bfddb5f1c3 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -119,7 +119,8 @@ case "$FIRMWARE" in
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac_crc $(mtd_get_mac_text board_data 2176)
;;
- ocedo,koala)
+ ocedo,koala|\
+ ocedo,ursus)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(mtd_get_mac_binary art 12)
;;
diff --git a/target/linux/ath79/dts/qca9558_ocedo_ursus.dts b/target/linux/ath79/dts/qca9558_ocedo_ursus.dts
new file mode 100644
index 0000000000..1a92da3946
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_ocedo_ursus.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9557.dtsi"
+
+/ {
+ compatible = "ocedo,ursus", "qca,qca9558";
+ model = "OCEDO Ursus";
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wifi2 {
+ label = "ursus:green:wlan2g";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wifi5 {
+ label = "ursus:green:wlan5g";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ };
+
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&uart {
+ status = "okay";
+};
+
+&pll {
+ clocks = <&extosc>;
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0x740000>;
+ };
+
+ partition@790000 {
+ label = "vendor";
+ reg = <0x790000 0x740000>;
+ read-only;
+ };
+
+ partition@ed0000 {
+ label = "data";
+ reg = <0xed0000 0x110000>;
+ read-only;
+ };
+
+ partition@fe0000 {
+ label = "id";
+ reg = <0xfe0000 0x010000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x06>;
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+};
+
+&eth0 {
+ status = "okay";
+ mtd-mac-address = <&art 0x00>;
+ phy-handle = <&phy1>;
+ pll-data = <0xa6000000 0x80000101 0x80001313>;
+
+ gmac_config: gmac-config {
+ device = <&gmac>;
+
+ rxdv-delay = <3>;
+ rxd-delay = <3>;
+ txen-delay = <0>;
+ txd-delay = <0>;
+ rgmii-enabled = <1>;
+ };
+};
+
+&eth1 {
+ status = "okay";
+ mtd-mac-address = <&art 0x12>;
+ phy-handle = <&phy2>;
+ pll-data = <0x3000101 0x101 0x1313>;
+};
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 0d5ad171f1..08d36f25d7 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -501,6 +501,15 @@ define Device/ocedo_raccoon
endef
TARGET_DEVICES += ocedo_raccoon
+define Device/ocedo_ursus
+ ATH_SOC := qca9558
+ DEVICE_TITLE := OCEDO Ursus
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ IMAGE_SIZE := 7424k
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += ocedo_ursus
+
define Device/openmesh_om5p-ac-v2
ATH_SOC := qca9558
DEVICE_TITLE := OpenMesh OM5P-AC v2