aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorJohn Crispin <john@openwrt.org>2014-07-01 10:26:42 +0000
committerJohn Crispin <john@openwrt.org>2014-07-01 10:26:42 +0000
commit4ddc0f9ff33033564b88d39f5e050996de1e782f (patch)
treef77e89ec579b704786443d7ab775bdf3a90e83d2 /target/linux
parent3c88de0d47f2fe8d1e051ced0010103e5a981047 (diff)
downloadupstream-4ddc0f9ff33033564b88d39f5e050996de1e782f.tar.gz
upstream-4ddc0f9ff33033564b88d39f5e050996de1e782f.tar.bz2
upstream-4ddc0f9ff33033564b88d39f5e050996de1e782f.zip
ramips: add WHR-1166 support
Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41447
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom3
-rwxr-xr-xtarget/linux/ramips/base-files/etc/uci-defaults/01_leds3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rw-r--r--target/linux/ramips/dts/WHR-1166D.dts138
-rw-r--r--target/linux/ramips/image/Makefile3
5 files changed, 148 insertions, 2 deletions
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 904afd1a41..3ed0fbb670 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -110,6 +110,7 @@ case "$FIRMWARE" in
whr-g300n | \
whr-300hp2 | \
whr-600d | \
+ whr-1166d | \
wl-330n | \
wl-330n3g | \
wl-351 | \
@@ -141,7 +142,7 @@ case "$FIRMWARE" in
cy-swr1100)
rt2x00_eeprom_extract "factory" 8192 512
;;
- rt-n56u | whr-600d)
+ rt-n56u | whr-600d | whr-1166d)
rt2x00_eeprom_extract "factory" 32768 512
;;
esac
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/01_leds b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
index c5e380cbc6..c2f768b8a3 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
@@ -176,7 +176,8 @@ case $board in
set_wifi_led "asus:blue:wifi"
;;
whr-300hp2 |\
- whr-600d)
+ whr-600d |\
+ whr-1166d)
ucidef_set_led_default "power" "power" "buffalo:green:power" "1"
ucidef_set_led_default "router" "router" "buffalo:green:router" "1"
;;
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 5d897fc521..697599341b 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -241,6 +241,9 @@ ramips_board_detect() {
*"WHR-600D")
name="whr-600d"
;;
+ *"WHR-1166D")
+ name="whr-1166d"
+ ;;
*"WHR-G300N")
name="whr-g300n"
;;
diff --git a/target/linux/ramips/dts/WHR-1166D.dts b/target/linux/ramips/dts/WHR-1166D.dts
new file mode 100644
index 0000000000..47e0b1b6ed
--- /dev/null
+++ b/target/linux/ramips/dts/WHR-1166D.dts
@@ -0,0 +1,138 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+ compatible = "ralink,mt7620a-soc";
+ model = "Buffalo WHR-1166D";
+
+ palmbus@10000000 {
+ gpio2: gpio@660 {
+ status = "okay";
+ };
+
+ spi@b00 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "en25q64";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l6405d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xeb0000>;
+ };
+
+ partition@e00000 {
+ label = "usercfg";
+ reg = <0xe00000 0x100000>;
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ ethernet@10100000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+
+ ralink,port-map = "llllw";
+ };
+
+ gsw@10110000 {
+ ralink,port4 = "ephy";
+ };
+
+ pcie@10140000 {
+ status = "okay";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ power {
+ label = "buffalo:red:power";
+ gpios = <&gpio0 7 1>;
+ };
+ status {
+ label = "buffalo:green:status";
+ gpios = <&gpio0 8 1>;
+ };
+ power2 {
+ label = "buffalo:green:power";
+ gpios = <&gpio0 9 1>;
+ };
+ status2 {
+ label = "buffalo:orange:status";
+ gpios = <&gpio0 10 1>;
+ };
+ internet {
+ label = "buffalo:green:internet";
+ gpios = <&gpio2 17 1>;
+ };
+ router {
+ label = "buffalo:green:router";
+ gpios = <&gpio2 18 1>;
+ };
+ router2 {
+ label = "buffalo:orange:router";
+ gpios = <&gpio2 19 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ s1 {
+ label = "reset";
+ gpios = <&gpio2 12 1>;
+ linux,code = <0x100>;
+ };
+ s2 {
+ label = "aoss";
+ gpios = <&gpio2 13 1>;
+ linux,code = <0x101>;
+ };
+ s3 {
+ label = "ap";
+ gpios = <&gpio2 14 1>;
+ linux,code = <0x102>;
+ };
+ s4 {
+ label = "bridge";
+ gpios = <&gpio2 15 1>;
+ linux,code = <0x103>;
+ };
+ };
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 1b342deb7a..ec3ef75de3 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -705,6 +705,8 @@ Image/Build/Profile/RP-N53=$(call BuildFirmware/Default8M/$(1),$(1),rp_n53,RP-N5
whr_300hp2_mtd_size=7012352
Image/Build/Profile/WHR300HP2=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-300hp2,WHR-300HP2,$(whr_300hp2_mtd_size))
Image/Build/Profile/WHR600D=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-600d,WHR-600D,$(whr_300hp2_mtd_size))
+whr_1166d_mtd_size=15400960
+Image/Build/Profile/WHR1166D=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-1166d,WHR-1166D,$(whr_1166hd_mtd_size))
dlink810l_mtd_size=6881280
Image/Build/Profile/DIR-810L=$(call BuildFirmware/CustomFlash/$(1),$(1),dir-810l,DIR-810L,$(dlink810l_mtd_size))
na930_mtd_size=20971520
@@ -720,6 +722,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/DIR-810L,$(1))
$(call Image/Build/Profile/WHR300HP2,$(1))
$(call Image/Build/Profile/WHR600D,$(1))
+ $(call Image/Build/Profile/WHR1166D,$(1))
$(call Image/Build/Profile/NA930,$(1))
endef
endif