adds 3.3 patches and files

SVN-Revision: 31307

97 files changed, 56546 insertions, 0 deletions

diff --git a/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/dev-gpio-buttons.h b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/dev-gpio-buttons.h
new file mode 100644
index 0000000000..adb531c39b
--- /dev/null
+++ b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/dev-gpio-buttons.h
@@ -0,0 +1,26 @@
+/*
+ *  Lantiq GPIO button support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _LANTIQ_DEV_GPIO_BUTTONS_H
+#define _LANTIQ_DEV_GPIO_BUTTONS_H
+
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+#define LTQ_KEYS_POLL_INTERVAL		20 /* msecs */
+#define LTQ_KEYS_DEBOUNCE_INTERVAL	(3 * LTQ_KEYS_POLL_INTERVAL)
+
+void ltq_register_gpio_keys_polled(int id,
+				      unsigned poll_interval,
+				      unsigned nbuttons,
+				      struct gpio_keys_button *buttons);
+
+#endif /* _LANTIQ_DEV_GPIO_BUTTONS_H */
diff --git a/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/dev-gpio-leds.h b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/dev-gpio-leds.h
new file mode 100644
index 0000000000..d51e496d14
--- /dev/null
+++ b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/dev-gpio-leds.h
@@ -0,0 +1,21 @@
+/*
+ *  Lantiq GPIO LED device support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _LANTIQ_DEV_LEDS_GPIO_H
+#define _LANTIQ_DEV_LEDS_GPIO_H
+
+#include <linux/leds.h>
+
+void ltq_add_device_gpio_leds(int id,
+	unsigned num_leds,
+	struct gpio_led *leds) __init;
+
+#endif /* _LANTIQ_DEV_LEDS_GPIO_H */
diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/dev-gpio-buttons.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/dev-gpio-buttons.c
new file mode 100644
index 0000000000..ad25cac797
--- /dev/null
+++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/dev-gpio-buttons.c
@@ -0,0 +1,58 @@
+/*
+ *  Lantiq GPIO button support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+
+#include <dev-gpio-buttons.h>
+
+void __init ltq_register_gpio_keys_polled(int id,
+					     unsigned poll_interval,
+					     unsigned nbuttons,
+					     struct gpio_keys_button *buttons)
+{
+	struct platform_device *pdev;
+	struct gpio_keys_platform_data pdata;
+	struct gpio_keys_button *p;
+	int err;
+
+	p = kmalloc(nbuttons * sizeof(*p), GFP_KERNEL);
+	if (!p)
+		return;
+
+	memcpy(p, buttons, nbuttons * sizeof(*p));
+
+	pdev = platform_device_alloc("gpio-keys-polled", id);
+	if (!pdev)
+		goto err_free_buttons;
+
+	memset(&pdata, 0, sizeof(pdata));
+	pdata.poll_interval = poll_interval;
+	pdata.nbuttons = nbuttons;
+	pdata.buttons = p;
+
+	err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
+	if (err)
+		goto err_put_pdev;
+
+	err = platform_device_add(pdev);
+	if (err)
+		goto err_put_pdev;
+
+	return;
+
+err_put_pdev:
+	platform_device_put(pdev);
+
+err_free_buttons:
+	kfree(p);
+}
diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/dev-gpio-leds.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/dev-gpio-leds.c
new file mode 100644
index 0000000000..89dc79de61
--- /dev/null
+++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/dev-gpio-leds.c
@@ -0,0 +1,57 @@
+/*
+ *  Lantiq GPIO LED device support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  Parts of this file are based on Atheros' 2.6.15 BSP
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+
+#include <dev-gpio-leds.h>
+
+void __init ltq_add_device_gpio_leds(int id, unsigned num_leds,
+					struct gpio_led *leds)
+{
+	struct platform_device *pdev;
+	struct gpio_led_platform_data pdata;
+	struct gpio_led *p;
+	int err;
+
+	p = kmalloc(num_leds * sizeof(*p), GFP_KERNEL);
+	if (!p)
+		return;
+
+	memcpy(p, leds, num_leds * sizeof(*p));
+
+	pdev = platform_device_alloc("leds-gpio", id);
+	if (!pdev)
+		goto err_free_leds;
+
+	memset(&pdata, 0, sizeof(pdata));
+	pdata.num_leds = num_leds;
+	pdata.leds = p;
+
+	err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
+	if (err)
+		goto err_put_pdev;
+
+	err = platform_device_add(pdev);
+	if (err)
+		goto err_put_pdev;
+
+	return;
+
+err_put_pdev:
+	platform_device_put(pdev);
+
+err_free_leds:
+	kfree(p);
+}
diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/addon-easy98000.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/addon-easy98000.c
new file mode 100644
index 0000000000..317ee4001b
--- /dev/null
+++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/addon-easy98000.c
@@ -0,0 +1,213 @@
+/*
+ *  EASY98000 CPLD Addon driver
+ *
+ *  Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2  as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+
+struct easy98000_reg_cpld {
+	u16 cmdreg1;		/* 0x1 */
+	u16 cmdreg0;		/* 0x0 */
+	u16 idreg0;		/* 0x3 */
+	u16 resreg;		/* 0x2 */
+	u16 intreg;		/* 0x5 */
+	u16 idreg1;		/* 0x4 */
+	u16 ledreg;		/* 0x7 */
+	u16 pcmconconfig;	/* 0x6 */
+	u16 res0;		/* 0x9 */
+	u16 ethledreg;		/* 0x8 */
+	u16 res1[4];		/* 0xa-0xd */
+	u16 cpld1v;		/* 0xf */
+	u16 cpld2v;		/* 0xe */
+};
+static struct easy98000_reg_cpld * const cpld =
+	(struct easy98000_reg_cpld *)(KSEG1 | 0x17c00000);
+#define cpld_r8(reg) (__raw_readw(&cpld->reg) & 0xFF)
+#define cpld_w8(val, reg) __raw_writew((val) & 0xFF, &cpld->reg)
+
+int easy98000_addon_has_dm9000(void)
+{
+	if ((cpld_r8(idreg0) & 0xF) == 1)
+		return 1;
+	return 0;
+}
+
+#if defined(CONFIG_PROC_FS)
+typedef void (*cpld_dump) (struct seq_file *s);
+struct proc_entry {
+	char *name;
+	void *callback;
+};
+
+static int cpld_proc_show ( struct seq_file *s, void *p )
+{
+	cpld_dump dump = s->private;
+
+	if ( dump != NULL )
+		dump(s);
+
+	return 0;
+}
+
+static int cpld_proc_open ( struct inode *inode, struct file *file )
+{
+	return single_open ( file, cpld_proc_show, PDE(inode)->data );
+}
+
+static void cpld_versions_get ( struct seq_file *s )
+{
+	seq_printf(s, "CPLD1: V%d\n", cpld_r8(cpld1v));
+	seq_printf(s, "CPLD2: V%d\n", cpld_r8(cpld2v));
+}
+
+static void cpld_ebu_module_get ( struct seq_file *s )
+{
+	u8 addon_id;
+
+	addon_id = cpld_r8(idreg0) & 0xF;
+	switch (addon_id) {
+	case 0xF: /* nothing connected */
+		break;
+	case 1:
+		seq_printf(s, "Ethernet Controller module (dm9000)\n");
+		break;
+	default:
+		seq_printf(s, "Unknown EBU module (EBU_ID=0x%02X)\n", addon_id);
+		break;
+	}
+}
+
+static void cpld_xmii_module_get ( struct seq_file *s )
+{
+	u8 addon_id;
+	char *mod = NULL;
+
+	addon_id = cpld_r8(idreg1) & 0xF;
+	switch (addon_id) {
+	case 0xF:
+		mod = "no module";
+		break;
+	case 0x1:
+		mod = "RGMII module";
+		break;
+	case 0x4:
+		mod = "GMII MAC Mode (XWAY TANTOS-3G)";
+		break;
+	case 0x6:
+		mod = "TMII MAC Mode (XWAY TANTOS-3G)";
+		break;
+	case 0x8:
+		mod = "GMII PHY module";
+		break;
+	case 0x9:
+		mod = "MII PHY module";
+		break;
+	case 0xA:
+		mod = "RMII PHY module";
+		break;
+	default:
+		break;
+	}
+	if (mod)
+		seq_printf(s, "%s\n", mod);
+	else
+		seq_printf(s, "unknown xMII module (xMII_ID=0x%02X)\n", addon_id);
+}
+
+static struct proc_entry proc_entries[] = {
+	{"versions",	cpld_versions_get},
+	{"ebu",		cpld_ebu_module_get},
+	{"xmii",	cpld_xmii_module_get},
+};
+
+static struct file_operations ops = {
+	.owner   = THIS_MODULE,
+	.open    = cpld_proc_open,
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.release = single_release,
+};
+
+static void cpld_proc_entry_create(struct proc_dir_entry *parent_node,
+				   struct proc_entry *proc_entry)
+{
+	proc_create_data ( proc_entry->name, (S_IFREG | S_IRUGO), parent_node,
+			   &ops, proc_entry->callback);
+}
+
+static int cpld_proc_install(void)
+{
+	struct proc_dir_entry *driver_proc_node;
+
+	driver_proc_node = proc_mkdir("cpld", NULL);
+	if (driver_proc_node != NULL) {
+		int i;
+		for (i = 0; i < ARRAY_SIZE(proc_entries); i++)
+			cpld_proc_entry_create(driver_proc_node,
+					      &proc_entries[i]);
+	} else {
+		printk("cannot create proc entry");
+		return -1;
+	}
+	return 0;
+}
+#else
+static inline int cpld_proc_install(void) {}
+#endif
+
+static int easy98000_addon_probe(struct platform_device *pdev)
+{
+	return cpld_proc_install();
+}
+
+static int easy98000_addon_remove(struct platform_device *pdev)
+{
+#if defined(CONFIG_PROC_FS)
+	char buf[64];
+	int i;
+
+	for (i = 0; i < sizeof(proc_entries) / sizeof(proc_entries[0]); i++) {
+		sprintf(buf, "cpld/%s", proc_entries[i].name);
+		remove_proc_entry(buf, 0);
+	}
+	remove_proc_entry("cpld", 0);
+#endif
+	return 0;
+}
+
+static struct platform_driver easy98000_addon_driver = {
+	.probe = easy98000_addon_probe,
+	.remove = __devexit_p(easy98000_addon_remove),
+	.driver = {
+		.name = "easy98000_addon",
+		.owner = THIS_MODULE,
+	},
+};
+
+int __init easy98000_addon_init(void)
+{
+	return platform_driver_register(&easy98000_addon_driver);
+}
+
+void __exit easy98000_addon_exit(void)
+{
+	platform_driver_unregister(&easy98000_addon_driver);
+}
+
+module_init(easy98000_addon_init);
+module_exit(easy98000_addon_exit);
diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/dev-leds-easy98000-cpld.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/dev-leds-easy98000-cpld.c
new file mode 100644
index 0000000000..94622cfda8
--- /dev/null
+++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/dev-leds-easy98000-cpld.c
@@ -0,0 +1,161 @@
+/*
+ *  EASY98000 CPLD LED driver
+ *
+ *  Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2  as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+
+#include "dev-leds-easy98000-cpld.h"
+
+const char *led_name[8] = {
+	"ge0_act",
+	"ge0_link",
+	"ge1_act",
+	"ge1_link",
+	"fe2_act",
+	"fe2_link",
+	"fe3_act",
+	"fe3_link"
+};
+
+#define cpld_base7			((u16 *)(KSEG1 | 0x17c0000c))
+#define cpld_base8			((u16 *)(KSEG1 | 0x17c00012))
+
+#define ltq_r16(reg)			__raw_readw(reg)
+#define ltq_w16(val, reg)		__raw_writew(val, reg)
+
+struct cpld_led_dev {
+	struct led_classdev	cdev;
+	u8			mask;
+	u16			*base;
+};
+
+struct cpld_led_drvdata {
+	struct cpld_led_dev	*led_devs;
+	int			num_leds;
+};
+
+void led_set(u8 mask, u16 *base)
+{
+	ltq_w16(ltq_r16(base) | mask, base);
+}
+
+void led_clear(u8 mask, u16 *base)
+{
+	ltq_w16(ltq_r16(base) & (~mask), base);
+}
+
+void led_blink_clear(u8 mask, u16 *base)
+{
+	led_clear(mask, base);
+}
+
+static void led_brightness(struct led_classdev *led_cdev,
+			       enum led_brightness value)
+{
+	struct cpld_led_dev *led_dev =
+	    container_of(led_cdev, struct cpld_led_dev, cdev);
+
+	if (value)
+		led_set(led_dev->mask, led_dev->base);
+	else
+		led_clear(led_dev->mask, led_dev->base);
+}
+
+static int led_probe(struct platform_device *pdev)
+{
+	int i;
+	char name[32];
+	struct cpld_led_drvdata *drvdata;
+	int ret = 0;
+
+	drvdata = kzalloc(sizeof(struct cpld_led_drvdata) +
+			  sizeof(struct cpld_led_dev) * MAX_LED,
+			  GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+
+	drvdata->led_devs = (struct cpld_led_dev *) &drvdata[1];
+
+	for (i = 0; i < MAX_LED; i++) {
+		struct cpld_led_dev *led_dev = &drvdata->led_devs[i];
+		led_dev->cdev.brightness_set = led_brightness;
+		led_dev->cdev.default_trigger = NULL;
+		led_dev->mask = 1 << (i % 8);
+		if(i < 8) {
+			sprintf(name, "easy98000-cpld:%s", led_name[i]);
+			led_dev->base = cpld_base8;
+		} else {
+			sprintf(name, "easy98000-cpld:red:%d", i-8);
+			led_dev->base = cpld_base7;
+		}
+		led_dev->cdev.name = name;
+		ret = led_classdev_register(&pdev->dev, &led_dev->cdev);
+		if (ret)
+			goto err;
+	}
+	platform_set_drvdata(pdev, drvdata);
+	return 0;
+
+err:
+	printk("led_probe: 3\n");
+	for (i = i - 1; i >= 0; i--)
+		led_classdev_unregister(&drvdata->led_devs[i].cdev);
+
+	kfree(drvdata);
+	return ret;
+}
+
+static int led_remove(struct platform_device *pdev)
+{
+	int i;
+	struct cpld_led_drvdata *drvdata = platform_get_drvdata(pdev);
+	for (i = 0; i < MAX_LED; i++)
+		led_classdev_unregister(&drvdata->led_devs[i].cdev);
+	kfree(drvdata);
+	return 0;
+}
+
+static struct platform_driver led_driver = {
+	.probe = led_probe,
+	.remove = __devexit_p(led_remove),
+	.driver = {
+		   .name = LED_NAME,
+		   .owner = THIS_MODULE,
+		   },
+};
+
+int __init easy98000_cpld_led_init(void)
+{
+	pr_info(LED_DESC ", Version " LED_VERSION
+		" (c) Copyright 2011, Lantiq Deutschland GmbH\n");
+	return platform_driver_register(&led_driver);
+}
+
+void __exit easy98000_cpld_led_exit(void)
+{
+	platform_driver_unregister(&led_driver);
+}
+
+module_init(easy98000_cpld_led_init);
+module_exit(easy98000_cpld_led_exit);
+
+MODULE_DESCRIPTION(LED_NAME);
+MODULE_DESCRIPTION(LED_DESC);
+MODULE_AUTHOR("Ralph Hempel <ralph.hempel@lantiq.com>");
+MODULE_LICENSE("GPL v2");
+
diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/dev-leds-easy98000-cpld.h b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/dev-leds-easy98000-cpld.h
new file mode 100644
index 0000000000..3160189fe9
--- /dev/null
+++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/dev-leds-easy98000-cpld.h
@@ -0,0 +1,20 @@
+/*
+ *  EASY98000 CPLD LED driver
+ *
+ *  Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2  as published
+ *  by the Free Software Foundation.
+ *
+ */
+#ifndef _INCLUDE_EASY98000_CPLD_LED_H_
+#define _INCLUDE_EASY98000_CPLD_LED_H_
+
+#define LED_NAME	"easy98000_cpld_led"
+#define LED_DESC	"EASY98000 LED driver"
+#define LED_VERSION	"1.0.0"
+
+#define MAX_LED		16
+
+#endif	/* _INCLUDE_EASY98000_CPLD_LED_H_ */
diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/mach-95C3AM1.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/mach-95C3AM1.c
new file mode 100644
index 0000000000..42a3344ae9
--- /dev/null
+++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/mach-95C3AM1.c
@@ -0,0 +1,94 @@
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c-gpio.h>
+
+#include <dev-gpio-leds.h>
+
+#include "../machtypes.h"
+#include "devices.h"
+
+#define BOARD_95C3AM1_GPIO_LED_0 10
+#define BOARD_95C3AM1_GPIO_LED_1 11
+#define BOARD_95C3AM1_GPIO_LED_2 12
+#define BOARD_95C3AM1_GPIO_LED_3 13
+
+static struct mtd_partition board_95C3AM1_partitions[] =
+{
+	{
+		.name	= "uboot",
+		.offset	= 0x0,
+		.size	= 0x40000,
+	},
+	{
+		.name	= "uboot_env",
+		.offset	= 0x40000,
+		.size	= 0x40000,	/* 2 sectors for redundant env. */
+	},
+	{
+		.name	= "linux",
+		.offset	= 0x80000,
+		.size	= 0xF80000,	/* map only 16 MiB */
+	},
+};
+
+static struct flash_platform_data board_95C3AM1_flash_platform_data = {
+	.name = "sflash",
+	.parts = board_95C3AM1_partitions,
+	.nr_parts = ARRAY_SIZE(board_95C3AM1_partitions)
+};
+
+static struct spi_board_info board_95C3AM1_flash_data __initdata = {
+	.modalias		= "m25p80",
+	.bus_num		= 0,
+	.chip_select		= 0,
+	.max_speed_hz		= 10 * 1000 * 1000,
+	.mode			= SPI_MODE_3,
+	.platform_data		= &board_95C3AM1_flash_platform_data
+};
+
+static struct gpio_led board_95C3AM1_gpio_leds[] __initdata = {
+	{
+		.name		= "power",
+		.gpio		= BOARD_95C3AM1_GPIO_LED_0,
+		.active_low	= 0,
+	}, {
+		.name		= "optical",
+		.gpio		= BOARD_95C3AM1_GPIO_LED_1,
+		.active_low	= 0,
+	}, {
+		.name		= "lan",
+		.gpio		= BOARD_95C3AM1_GPIO_LED_2,
+		.active_low	= 0,
+	}, {
+		.name		= "update",
+		.gpio		= BOARD_95C3AM1_GPIO_LED_3,
+		.active_low	= 0,
+	}
+};
+
+static struct i2c_gpio_platform_data board_95C3AM1_i2c_gpio_data = {
+	.sda_pin	= 107,
+	.scl_pin	= 108,
+};
+
+static struct platform_device board_95C3AM1_i2c_gpio_device = {
+	.name		= "i2c-gpio",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &board_95C3AM1_i2c_gpio_data,
+	}
+};
+
+static void __init board_95C3AM1_init(void)
+{
+	falcon_register_i2c();
+	falcon_register_spi_flash(&board_95C3AM1_flash_data);
+	platform_device_register(&board_95C3AM1_i2c_gpio_device);
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(board_95C3AM1_gpio_leds),
+						board_95C3AM1_gpio_leds);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_95C3AM1,
+			"95C3AM1",
+			"95C3AM1 Board",
+			board_95C3AM1_init);
diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/mach-easy98020.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/mach-easy98020.c
new file mode 100644
index 0000000000..4cdfc199db
--- /dev/null
+++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/mach-easy98020.c
@@ -0,0 +1,118 @@
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/gpio_buttons.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <dev-gpio-leds.h>
+
+#include "../machtypes.h"
+#include "devices.h"
+
+#define EASY98020_GPIO_LED_0 9
+#define EASY98020_GPIO_LED_1 10
+#define EASY98020_GPIO_LED_2 11
+#define EASY98020_GPIO_LED_3 12
+#define EASY98020_GPIO_LED_GE0_ACT 110
+#define EASY98020_GPIO_LED_GE0_LINK 109
+#define EASY98020_GPIO_LED_GE1_ACT 106
+#define EASY98020_GPIO_LED_GE1_LINK 105
+
+static struct mtd_partition easy98020_spi_partitions[] =
+{
+	{
+		.name	= "uboot",
+		.offset	= 0x0,
+		.size	= 0x40000,
+	},
+	{
+		.name	= "uboot_env",
+		.offset	= 0x40000,
+		.size	= 0x40000,	/* 2 sectors for redundant env. */
+	},
+	{
+		.name	= "linux",
+		.offset	= 0x80000,
+		.size	= 0xF80000,	/* map only 16 MiB */
+	},
+};
+
+static struct flash_platform_data easy98020_spi_flash_platform_data = {
+	.name = "sflash",
+	.parts = easy98020_spi_partitions,
+	.nr_parts = ARRAY_SIZE(easy98020_spi_partitions)
+};
+
+static struct spi_board_info easy98020_spi_flash_data __initdata = {
+	.modalias		= "m25p80",
+	.bus_num		= 0,
+	.chip_select		= 0,
+	.max_speed_hz		= 10 * 1000 * 1000,
+	.mode			= SPI_MODE_3,
+	.platform_data		= &easy98020_spi_flash_platform_data
+};
+
+static struct gpio_led easy98020_gpio_leds[] __initdata = {
+	{
+		.name		= "easy98020:green:0",
+		.gpio		= EASY98020_GPIO_LED_0,
+		.active_low	= 0,
+	}, {
+		.name		= "easy98020:green:1",
+		.gpio		= EASY98020_GPIO_LED_1,
+		.active_low	= 0,
+	}, {
+		.name		= "easy98020:green:2",
+		.gpio		= EASY98020_GPIO_LED_2,
+		.active_low	= 0,
+	}, {
+		.name		= "easy98020:green:3",
+		.gpio		= EASY98020_GPIO_LED_3,
+		.active_low	= 0,
+	}, {
+		.name		= "easy98020:ge0_act",
+		.gpio		= EASY98020_GPIO_LED_GE0_ACT,
+		.active_low	= 0,
+	}, {
+		.name		= "easy98020:ge0_link",
+		.gpio		= EASY98020_GPIO_LED_GE0_LINK,
+		.active_low	= 0,
+	}, {
+		.name		= "easy98020:ge1_act",
+		.gpio		= EASY98020_GPIO_LED_GE1_ACT,
+		.active_low	= 0,
+	}, {
+		.name		= "easy98020:ge1_link",
+		.gpio		= EASY98020_GPIO_LED_GE1_LINK,
+		.active_low	= 0,
+	}
+};
+
+static void __init easy98020_init(void)
+{
+	falcon_register_i2c();
+	falcon_register_spi_flash(&easy98020_spi_flash_data);
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(easy98020_gpio_leds),
+					easy98020_gpio_leds);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_EASY98020,
+			"EASY98020",
+			"EASY98020 Eval Board",
+			easy98020_init);
+
+MIPS_MACHINE(LANTIQ_MACH_EASY98020_1LAN,
+			"EASY98020_1LAN",
+			"EASY98020 Eval Board (1 LAN port)",
+			easy98020_init);
+
+MIPS_MACHINE(LANTIQ_MACH_EASY98020_2LAN,
+			"EASY98020_2LAN",
+			"EASY98020 Eval Board (2 LAN ports)",
+			easy98020_init);
diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-dwc_otg.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-dwc_otg.c
new file mode 100644
index 0000000000..67f580527f
--- /dev/null
+++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-dwc_otg.c
@@ -0,0 +1,70 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/mtd/physmap.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/etherdevice.h>
+#include <linux/reboot.h>
+#include <linux/time.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+
+#include <lantiq_soc.h>
+#include <lantiq_irq.h>
+#include <lantiq_platform.h>
+
+#define LTQ_USB_IOMEM_BASE 0x1e101000
+#define LTQ_USB_IOMEM_SIZE 0x00001000
+
+static struct resource resources[] =
+{
+	[0] = {
+		.name    = "dwc_otg_membase",
+		.start   = LTQ_USB_IOMEM_BASE,
+		.end	 = LTQ_USB_IOMEM_BASE + LTQ_USB_IOMEM_SIZE - 1,
+		.flags	 = IORESOURCE_MEM,
+	},
+	[1] = {
+		.name    = "dwc_otg_irq",
+		.flags   = IORESOURCE_IRQ,
+	},
+};
+
+static u64 dwc_dmamask = (u32)0x1fffffff;
+
+static struct platform_device platform_dev = {
+	.name = "dwc_otg",
+	.dev = {
+		.dma_mask      = &dwc_dmamask,
+	},
+	.resource		= resources,
+	.num_resources		= ARRAY_SIZE(resources),
+};
+
+int __init
+xway_register_dwc(int pin)
+{
+	struct irq_data d;
+	d.irq = resources[1].start;
+	ltq_enable_irq(&d);
+	resources[1].start = ltq_is_ase() ? LTQ_USB_ASE_INT : LTQ_USB_INT;
+	platform_dev.dev.platform_data = (void*) pin;
+	return platform_device_register(&platform_dev);
+}
diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-dwc_otg.h b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-dwc_otg.h
new file mode 100644
index 0000000000..521fad05ef
--- /dev/null
+++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-dwc_otg.h
@@ -0,0 +1,17 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LTQ_DEV_DWC_H__
+#define _LTQ_DEV_DWC_H__
+
+#include <lantiq_platform.h>
+
+extern void __init xway_register_dwc(int pin);
+
+#endif
diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-wifi-athxk.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-wifi-athxk.c
new file mode 100644
index 0000000000..a75abe3e00
--- /dev/null
+++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-wifi-athxk.c
@@ -0,0 +1,53 @@
+/*
+ *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ *  Copyright (C) 2011 Andrej Vlašić <andrej.vlasic0@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ath5k_platform.h>
+#include <linux/ath9k_platform.h>
+#include <linux/pci.h>
+
+#include "dev-wifi-athxk.h"
+
+extern int (*ltqpci_plat_dev_init)(struct pci_dev *dev);
+struct ath5k_platform_data ath5k_pdata;
+struct ath9k_platform_data ath9k_pdata = {
+	.led_pin = -1,
+	.endian_check = true,
+};
+
+static int
+ath5k_pci_plat_dev_init(struct pci_dev *dev)
+{
+	dev->dev.platform_data = &ath5k_pdata;
+	return 0;
+}
+
+static int
+ath9k_pci_plat_dev_init(struct pci_dev *dev)
+{
+	dev->dev.platform_data = &ath9k_pdata;
+	return 0;
+}
+
+void __init
+ltq_register_ath5k(u16 *eeprom_data, u8 *macaddr)
+{
+	ath5k_pdata.eeprom_data = eeprom_data;
+	ath5k_pdata.macaddr = macaddr;
+	ltqpci_plat_dev_init = ath5k_pci_plat_dev_init;
+}
+
+void __init
+ltq_register_ath9k(u16 *eeprom_data, u8 *macaddr)
+{
+	memcpy(ath9k_pdata.eeprom_data, eeprom_data, sizeof(ath9k_pdata.eeprom_data));
+	ath9k_pdata.macaddr = macaddr;
+	ltqpci_plat_dev_init = ath9k_pci_plat_dev_init;
+}
diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-wifi-athxk.h b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-wifi-athxk.h
new file mode 100644
index 0000000000..5fdb46b612
--- /dev/null
+++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-wifi-athxk.h
@@ -0,0 +1,16 @@
+/*
+ *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ *  Copyright (C) 2011 Andrej Vlašić <andrej.vlasic0@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _DEV_WIFI_ATHXK_H__
+#define _DEV_WIFI_ATHXK_H__
+
+extern void ltq_register_ath5k(u16 *eeprom_data, u8 *macaddr);
+extern void ltq_register_ath9k(u16 *eeprom_data, u8 *macaddr);
+
+#endif
diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-wifi-rt2x00.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-wifi-rt2x00.c
new file mode 100644
index 0000000000..94932df785
--- /dev/null
+++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-wifi-rt2x00.c
@@ -0,0 +1,31 @@
+/*
+ *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/rt2x00_platform.h>
+#include <linux/pci.h>
+
+#include "dev-wifi-rt2x00.h"
+
+extern int (*ltqpci_plat_dev_init)(struct pci_dev *dev);
+struct rt2x00_platform_data rt2x00_pdata;
+
+static int
+rt2x00_pci_plat_dev_init(struct pci_dev *dev)
+{
+	dev->dev.platform_data = &rt2x00_pdata;
+	return 0;
+}
+
+void __init
+ltq_register_rt2x00(const char *firmware)
+{
+	rt2x00_pdata.eeprom_file_name =  kstrdup(firmware, GFP_KERNEL);
+	ltqpci_plat_dev_init = rt2x00_pci_plat_dev_init;
+}
diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-wifi-rt2x00.h b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-wifi-rt2x00.h
new file mode 100644
index 0000000000..060ca50270
--- /dev/null
+++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-wifi-rt2x00.h
@@ -0,0 +1,14 @@
+/*
+ *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _DEV_WIFI_RT2X00_H__
+#define _DEV_WIFI_RT2X00_H__
+
+extern void ltq_register_rt2x00(const char *firmware);
+
+#endif
diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-arv.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-arv.c
new file mode 100644
index 0000000000..99926c5c81
--- /dev/null
+++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-arv.c
@@ -0,0 +1,785 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/gpio_buttons.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/etherdevice.h>
+#include <linux/ath5k_platform.h>
+#include <linux/ath9k_platform.h>
+#include <linux/pci.h>
+
+#include <lantiq_soc.h>
+#include <lantiq_platform.h>
+#include <dev-gpio-leds.h>
+#include <dev-gpio-buttons.h>
+
+#include "../machtypes.h"
+#include "dev-wifi-rt2x00.h"
+#include "dev-wifi-athxk.h"
+#include "devices.h"
+#include "dev-dwc_otg.h"
+#include "pci-ath-fixup.h"
+
+static struct mtd_partition arv45xx_brnboot_partitions[] =
+{
+	{
+		.name	= "brn-boot",
+		.offset	= 0x0,
+		.size	= 0x20000,
+	},
+	{
+		.name	= "config",
+		.offset	= 0x20000,
+		.size	= 0x30000,
+	},
+	{
+		.name	= "linux",
+		.offset	= 0x50000,
+		.size	= 0x390000,
+	},
+	{
+		.name	= "reserved", /* 12-byte signature at 0x3efff4 :/ */
+		.offset	= 0x3e0000,
+		.size	= 0x010000,
+	},
+	{
+		.name	= "eeprom",
+		.offset	= 0x3f0000,
+		.size	= 0x10000,
+	},
+};
+
+static struct mtd_partition arv75xx_brnboot_partitions[] =
+{
+	{
+		.name	= "brn-boot",
+		.offset	= 0x0,
+		.size	= 0x20000,
+	},
+	{
+		.name	= "config",
+		.offset	= 0x20000,
+		.size	= 0x40000,
+	},
+	{
+		.name	= "linux",
+		.offset	= 0x440000,
+		.size	= 0x3a0000,
+	},
+	{
+		.name	= "reserved", /* 12-byte signature at 0x7efff4 :/ */
+		.offset	= 0x7e0000,
+		.size	= 0x010000,
+	},
+	{
+		.name	= "board_config",
+		.offset	= 0x7f0000,
+		.size	= 0x10000,
+	},
+};
+
+/*
+ * this is generic configuration for all arv based boards, note that it can be
+ * rewriten in arv_load_nor()
+ */
+static struct mtd_partition arv_partitions[] =
+{
+	{
+		.name	= "uboot",
+		.offset	= 0x0,
+		.size	= 0x20000,
+	},
+	{
+		.name	= "uboot_env",
+		.offset	= 0x20000,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "linux",
+		.offset	= 0x30000,
+		.size	= 0x3c0000,
+	},
+	{
+		.name	= "board_config",
+		.offset	= 0x3f0000,
+		.size	= 0x10000,
+	},
+};
+
+static struct physmap_flash_data arv45xx_brnboot_flash_data = {
+	.nr_parts	= ARRAY_SIZE(arv45xx_brnboot_partitions),
+	.parts		= arv45xx_brnboot_partitions,
+};
+
+static struct physmap_flash_data arv75xx_brnboot_flash_data = {
+	.nr_parts	= ARRAY_SIZE(arv75xx_brnboot_partitions),
+	.parts		= arv75xx_brnboot_partitions,
+};
+
+static struct physmap_flash_data arv_flash_data = {
+	.nr_parts	= ARRAY_SIZE(arv_partitions),
+	.parts		= arv_partitions,
+};
+
+static void arv_load_nor(unsigned int max)
+{
+#define UBOOT_MAGIC	0x27051956
+
+	int i;
+	int sector = -1;
+
+	if (ltq_brn_boot) {
+		if (max == 0x800000)
+			ltq_register_nor(&arv75xx_brnboot_flash_data);
+		else
+			ltq_register_nor(&arv45xx_brnboot_flash_data);
+		return;
+	}
+
+	for (i = 1; i < 4 && sector < 0; i++) {
+		unsigned int uboot_magic;
+		memcpy_fromio(&uboot_magic, (void *)KSEG1ADDR(LTQ_FLASH_START) + (i * 0x10000), 4);
+		if (uboot_magic == UBOOT_MAGIC)
+			sector = i;
+	}
+
+	if (sector < 0)
+		return;
+
+	arv_partitions[0].size = arv_partitions[1].offset = (sector - 1) * 0x10000;
+	arv_partitions[2].offset = arv_partitions[0].size + 0x10000;
+	arv_partitions[2].size = max - arv_partitions[2].offset - 0x10000;
+	arv_partitions[3].offset = max - 0x10000;
+	ltq_register_nor(&arv_flash_data);
+}
+
+static struct ltq_pci_data ltq_pci_data = {
+	.clock  = PCI_CLOCK_EXT,
+	.gpio   = PCI_GNT1 | PCI_REQ1,
+	.irq    = {
+		[14] = INT_NUM_IM0_IRL0 + 22,
+	},
+};
+
+static struct ltq_eth_data ltq_eth_data = {
+	.mii_mode	= PHY_INTERFACE_MODE_RMII,
+};
+
+static struct gpio_led
+arv4510pw_gpio_leds[] __initdata = {
+	{ .name = "soc:green:foo", .gpio = 4, .active_low = 1, },
+};
+
+static struct gpio_led
+arv4518pw_gpio_leds[] __initdata = {
+	{ .name = "soc:green:power", .gpio = 3, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:adsl", .gpio = 4, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:internet", .gpio = 5, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:wifi", .gpio = 6, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:yellow:wps", .gpio = 7, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:red:fail", .gpio = 8, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:usb", .gpio = 19, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:voip", .gpio = 100, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:fxs1", .gpio = 101, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:fxs2", .gpio = 102, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:fxo", .gpio = 103, .active_low = 1, .default_trigger = "default-on" },
+};
+
+static struct gpio_keys_button
+arv4518pw_gpio_keys[] __initdata = {
+	{
+		.desc		= "wifi",
+		.type		= EV_KEY,
+		.code		= BTN_0,
+		.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= 28,
+		.active_low	= 1,
+	},
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= BTN_1,
+		.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= 30,
+		.active_low	= 1,
+	},
+	{
+		.desc		= "wps",
+		.type		= EV_KEY,
+		.code		= BTN_2,
+		.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= 29,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_led
+arv4519pw_gpio_leds[] __initdata = {
+	{ .name = "soc:red:power", .gpio = 7, .active_low = 1, },
+	{ .name = "soc:green:power", .gpio = 2, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:wifi", .gpio = 6, .active_low = 1, },
+	{ .name = "soc:green:adsl", .gpio = 4, .active_low = 1, },
+	{ .name = "soc:green:internet", .gpio = 5, .active_low = 1, },
+	{ .name = "soc:red:internet", .gpio = 8, .active_low = 1, },
+	{ .name = "soc:green:voip", .gpio = 100, .active_low = 1, },
+	{ .name = "soc:green:phone1", .gpio = 101, .active_low = 1, },
+	{ .name = "soc:green:phone2", .gpio = 102, .active_low = 1, },
+	{ .name = "soc:green:fxo", .gpio = 103, .active_low = 1, },
+	{ .name = "soc:green:usb", .gpio = 19, .active_low = 1, },
+	{ .name = "soc:orange:wps", .gpio = 104, .active_low = 1, },
+	{ .name = "soc:green:wps", .gpio = 105, .active_low = 1, },
+	{ .name = "soc:red:wps", .gpio = 106, .active_low = 1, },
+
+};
+
+static struct gpio_keys_button
+arv4519pw_gpio_keys[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= BTN_1,
+		.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= 30,
+		.active_low	= 1,
+	},
+	{
+		.desc		= "wlan",
+		.type		= EV_KEY,
+		.code		= BTN_2,
+		.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= 28,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_led
+arv4520pw_gpio_leds[] __initdata = {
+	{ .name = "soc:blue:power", .gpio = 3, .active_low = 1, },
+	{ .name = "soc:blue:adsl", .gpio = 4, .active_low = 1, },
+	{ .name = "soc:blue:internet", .gpio = 5, .active_low = 1, },
+	{ .name = "soc:red:power", .gpio = 6, .active_low = 1, },
+	{ .name = "soc:yellow:wps", .gpio = 7, .active_low = 1, },
+	{ .name = "soc:red:wps", .gpio = 9, .active_low = 1, },
+	{ .name = "soc:blue:voip", .gpio = 100, .active_low = 1, },
+	{ .name = "soc:blue:fxs1", .gpio = 101, .active_low = 1, },
+	{ .name = "soc:blue:fxs2", .gpio = 102, .active_low = 1, },
+	{ .name = "soc:blue:fxo", .gpio = 103, .active_low = 1, },
+	{ .name = "soc:blue:voice", .gpio = 104, .active_low = 1, },
+	{ .name = "soc:blue:usb", .gpio = 105, .active_low = 1, },
+	{ .name = "soc:blue:wifi", .gpio = 106, .active_low = 1, },
+};
+
+static struct gpio_led
+arv452cpw_gpio_leds[] __initdata = {
+	{ .name = "soc:blue:power", .gpio = 3, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:blue:adsl", .gpio = 4, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:blue:isdn", .gpio = 5, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:red:power", .gpio = 6, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:yellow:wps", .gpio = 7, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:red:wps", .gpio = 9, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:blue:fxs1", .gpio = 100, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:blue:fxs2", .gpio = 101, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:blue:wps", .gpio = 102, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:blue:fxo", .gpio = 103, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:blue:voice", .gpio = 104, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:blue:usb", .gpio = 105, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:blue:wifi", .gpio = 106, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:blue:internet", .gpio = 108, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:red:internet", .gpio = 109, .active_low = 1, .default_trigger = "default-on" },
+};
+
+static struct gpio_led
+arv4525pw_gpio_leds[] __initdata = {
+	{ .name = "soc:green:dsl", .gpio = 6, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:wifi", .gpio = 8, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:online", .gpio = 9, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:fxs-internet", .gpio = 5, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:fxs-festnetz", .gpio = 4, .active_low = 1, .default_trigger = "default-on" },
+};
+
+#define ARV4525PW_PHYRESET	13
+#define ARV4525PW_RELAY		31
+
+static struct gpio arv4525pw_gpios[] __initdata = {
+	{ ARV4525PW_PHYRESET, GPIOF_OUT_INIT_HIGH, "phyreset" },
+	{ ARV4525PW_RELAY,    GPIOF_OUT_INIT_HIGH, "relay"    },
+};
+
+
+static struct gpio_led
+arv752dpw22_gpio_leds[] __initdata = {
+	{ .name = "soc:blue:power", .gpio = 3, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:red:internet", .gpio = 5, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:red:power", .gpio = 6, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:red:wps", .gpio = 8, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:red:fxo", .gpio = 103, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:red:voice", .gpio = 104, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:usb", .gpio = 105, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:wifi", .gpio = 106, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:wifi1", .gpio = 107, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:blue:wifi", .gpio = 108, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:blue:wifi1", .gpio = 109, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:eth1", .gpio = 111, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:eth2", .gpio = 112, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:eth3", .gpio = 113, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:eth4", .gpio = 114, .active_low = 1, .default_trigger = "default-on", },
+};
+
+static struct gpio_keys_button
+arv752dpw22_gpio_keys[] __initdata = {
+	{
+		.desc		= "btn0",
+		.type		= EV_KEY,
+		.code		= BTN_0,
+		.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= 12,
+		.active_low	= 1,
+	},
+	{
+		.desc		= "btn1",
+		.type		= EV_KEY,
+		.code		= BTN_1,
+		.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= 13,
+		.active_low	= 1,
+	},
+	{
+		.desc		= "btn2",
+		.type		= EV_KEY,
+		.code		= BTN_2,
+		.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= 28,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_led
+arv7518pw_gpio_leds[] __initdata = {
+	{ .name = "soc:red:power", .gpio = 7, .active_low = 1, },
+	{ .name = "soc:green:power", .gpio = 2, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:wifi", .gpio = 6, .active_low = 1, },
+	{ .name = "soc:green:adsl", .gpio = 4, .active_low = 1, },
+	{ .name = "soc:green:internet", .gpio = 5, .active_low = 1, },
+	{ .name = "soc:red:internet", .gpio = 8, .active_low = 1, },
+	{ .name = "soc:green:voip", .gpio = 100, .active_low = 1, },
+	{ .name = "soc:green:phone1", .gpio = 101, .active_low = 1, },
+	{ .name = "soc:green:phone2", .gpio = 102, .active_low = 1, },
+	{ .name = "soc:orange:fail", .gpio = 103, .active_low = 1, },
+	{ .name = "soc:green:usb", .gpio = 19, .active_low = 1, },
+	{ .name = "soc:orange:wps", .gpio = 104, .active_low = 1, },
+	{ .name = "soc:green:wps", .gpio = 105, .active_low = 1, },
+	{ .name = "soc:red:wps", .gpio = 106, .active_low = 1, },
+
+};
+
+static struct gpio_keys_button
+arv7518pw_gpio_keys[] __initdata = {
+	/*{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= BTN_1,
+		.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= 23,
+		.active_low	= 1,
+	},*/
+	{
+		.desc		= "wifi",
+		.type		= EV_KEY,
+		.code		= BTN_2,
+		.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= 25,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_button
+arv7525pw_gpio_keys[] __initdata = {
+	{
+		.desc		= "restart",
+		.type		= EV_KEY,
+		.code		= BTN_0,
+		.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= 29,
+		.active_low	= 1,
+	},
+};
+
+static void
+arv_register_ethernet(unsigned int mac_addr)
+{
+	memcpy_fromio(&ltq_eth_data.mac.sa_data,
+		(void *)KSEG1ADDR(LTQ_FLASH_START + mac_addr), 6);
+	ltq_register_etop(&ltq_eth_data);
+}
+
+static u16 arv_ath5k_eeprom_data[ATH5K_PLAT_EEP_MAX_WORDS];
+static u16 arv_ath9k_eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS];
+static u8 arv_athxk_eeprom_mac[6];
+
+void __init
+arv_register_ath5k(unsigned int ath_addr, unsigned int mac_addr)
+{
+	int i;
+
+	memcpy_fromio(arv_athxk_eeprom_mac,
+		(void *)KSEG1ADDR(LTQ_FLASH_START + mac_addr), 6);
+	arv_athxk_eeprom_mac[5]++;
+	memcpy_fromio(arv_ath5k_eeprom_data,
+		(void *)KSEG1ADDR(LTQ_FLASH_START + ath_addr), ATH5K_PLAT_EEP_MAX_WORDS);
+	// swap eeprom bytes
+	for (i = 0; i < ATH5K_PLAT_EEP_MAX_WORDS>>1; i++) {
+		arv_ath5k_eeprom_data[i] = swab16(arv_ath5k_eeprom_data[i]);
+		if (i == 0x17e>>1) {
+			/*
+			 * regdomain is invalid. it's unknown how did original
+			 * fw convered value to 0x82d4 so for now force to 0x67
+			 */
+			arv_ath5k_eeprom_data[i] &= 0x0000;
+			arv_ath5k_eeprom_data[i] |= 0x67;
+		}
+	}
+}
+
+void __init
+arv_register_ath9k(unsigned int ath_addr, unsigned int mac_addr)
+{
+	int i;
+	u16 *eepdata, sum, el;
+
+	memcpy_fromio(arv_athxk_eeprom_mac,
+		(void *)KSEG1ADDR(LTQ_FLASH_START + mac_addr), 6);
+	arv_athxk_eeprom_mac[5]++;
+	memcpy_fromio(arv_ath9k_eeprom_data,
+		(void *)KSEG1ADDR(LTQ_FLASH_START + ath_addr), ATH9K_PLAT_EEP_MAX_WORDS);
+
+	// force regdomain to 0x67
+	arv_ath9k_eeprom_data[0x208>>1] = 0x67;
+
+	// calculate new checksum
+	sum = arv_ath9k_eeprom_data[0x200>>1];
+	el = sum / sizeof(u16) - 2;  /* skip length and (old) checksum */
+	eepdata = (u16 *) (&arv_ath9k_eeprom_data[0x204>>1]); /* after checksum */
+	for (i = 0; i < el; i++)
+		sum ^= *eepdata++;
+	sum ^= 0xffff;
+	arv_ath9k_eeprom_data[0x202>>1] = sum;
+}
+
+static void __init
+arv3527p_init(void)
+{
+#define ARV3527P_MAC_ADDR		0x3f0016
+
+	ltq_register_gpio_stp();
+	//ltq_add_device_gpio_leds(arv3527p_gpio_leds, ARRAY_SIZE(arv3527p_gpio_leds));
+	arv_load_nor(0x400000);
+	arv_register_ethernet(ARV3527P_MAC_ADDR);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_ARV3527P,
+			"ARV3527P",
+			"ARV3527P - Arcor Easybox 401",
+			arv3527p_init);
+
+static void __init
+arv4510pw_init(void)
+{
+#define ARV4510PW_MAC_ADDR		0x3f0014
+
+	ltq_register_gpio_stp();
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4510pw_gpio_leds), arv4510pw_gpio_leds);
+	arv_load_nor(0x400000);
+	ltq_pci_data.irq[12] = (INT_NUM_IM2_IRL0 + 31);
+	ltq_pci_data.irq[15] = (INT_NUM_IM0_IRL0 + 26);
+	ltq_pci_data.gpio |= PCI_EXIN2 | PCI_REQ2;
+	ltq_register_pci(&ltq_pci_data);
+	arv_register_ethernet(ARV4510PW_MAC_ADDR);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_ARV4510PW,
+			"ARV4510PW",
+			"ARV4510PW - Wippies Homebox",
+			arv4510pw_init);
+
+static void __init
+arv4518pw_init(void)
+{
+#define ARV4518PW_EBU			0
+#define ARV4518PW_USB			14
+#define ARV4518PW_SWITCH_RESET		13
+#define ARV4518PW_ATH_ADDR		0x3f0400
+#define ARV4518PW_MADWIFI_ADDR		0xb03f0400
+#define ARV4518PW_MAC_ADDR		0x3f0016
+
+	ltq_register_gpio_ebu(ARV4518PW_EBU);
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4518pw_gpio_leds), arv4518pw_gpio_leds);
+	ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL,
+				ARRAY_SIZE(arv4518pw_gpio_keys), arv4518pw_gpio_keys);
+	arv_load_nor(0x400000);
+	ltq_pci_data.gpio = PCI_GNT2 | PCI_REQ2;
+	ltq_register_pci(&ltq_pci_data);
+	xway_register_dwc(ARV4518PW_USB);
+	arv_register_ethernet(ARV4518PW_MAC_ADDR);
+	arv_register_ath5k(ARV4518PW_ATH_ADDR, ARV4518PW_MAC_ADDR);
+	ltq_register_ath5k(arv_ath5k_eeprom_data, arv_athxk_eeprom_mac);
+
+	gpio_request(ARV4518PW_SWITCH_RESET, "switch");
+	gpio_direction_output(ARV4518PW_SWITCH_RESET, 1);
+	gpio_export(ARV4518PW_SWITCH_RESET, 0);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_ARV4518PW,
+			"ARV4518PW",
+			"ARV4518PW - SMC7908A-ISP, Airties WAV-221",
+			arv4518pw_init);
+
+static void __init
+arv4519pw_init(void)
+{
+#define ARV4519PW_EBU			0
+#define ARV4519PW_USB			14
+#define ARV4519PW_RELAY			31
+#define ARV4519PW_SWITCH_RESET		13
+#define ARV4519PW_ATH_ADDR		0x3f0400
+#define ARV4519PW_MAC_ADDR		0x3f0016
+
+	arv_load_nor(0x400000);
+	ltq_register_gpio_ebu(ARV4519PW_EBU);
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4519pw_gpio_leds), arv4519pw_gpio_leds);
+	ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL,
+				ARRAY_SIZE(arv4519pw_gpio_keys), arv4519pw_gpio_keys);
+	ltq_pci_data.gpio = PCI_GNT2 | PCI_REQ1;
+	ltq_register_pci(&ltq_pci_data);
+	xway_register_dwc(ARV4519PW_USB);
+	arv_register_ethernet(ARV4519PW_MAC_ADDR);
+	arv_register_ath5k(ARV4519PW_ATH_ADDR, ARV4519PW_MAC_ADDR);
+	ltq_register_ath5k(arv_ath5k_eeprom_data, arv_athxk_eeprom_mac);
+
+	gpio_request(ARV4519PW_RELAY, "relay");
+	gpio_direction_output(ARV4519PW_RELAY, 1);
+	gpio_export(ARV4519PW_RELAY, 0);
+
+	gpio_request(ARV4519PW_SWITCH_RESET, "switch");
+	gpio_set_value(ARV4519PW_SWITCH_RESET, 1);
+	gpio_export(ARV4519PW_SWITCH_RESET, 0);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_ARV4519PW,
+			"ARV4519PW",
+			"ARV4519PW - Vodafone, Pirelli",
+			arv4519pw_init);
+
+static void __init
+arv4520pw_init(void)
+{
+#define ARV4520PW_EBU			0x400
+#define ARV4520PW_USB			28
+#define ARV4520PW_SWITCH_RESET		110
+#define ARV4520PW_MAC_ADDR		0x3f0016
+
+	ltq_register_gpio_ebu(ARV4520PW_EBU);
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4520pw_gpio_leds), arv4520pw_gpio_leds);
+	arv_load_nor(0x400000);
+	ltq_register_pci(&ltq_pci_data);
+	ltq_register_tapi();
+	arv_register_ethernet(ARV4520PW_MAC_ADDR);
+	xway_register_dwc(ARV4520PW_USB);
+
+	gpio_request(ARV4520PW_SWITCH_RESET, "switch");
+	gpio_set_value(ARV4520PW_SWITCH_RESET, 1);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_ARV4520PW,
+			"ARV4520PW",
+			"ARV4520PW - Airties WAV-281, Arcor A800",
+			arv4520pw_init);
+
+static void __init
+arv452Cpw_init(void)
+{
+#define ARV452CPW_EBU			0x77f
+#define ARV452CPW_USB			28
+#define ARV452CPW_RELAY1		31
+#define ARV452CPW_RELAY2		107
+#define ARV452CPW_SWITCH_RESET		110
+#define ARV452CPW_ATH_ADDR		0x3f0400
+#define ARV452CPW_MADWIFI_ADDR		0xb03f0400
+#define ARV452CPW_MAC_ADDR		0x3f0016
+
+	ltq_register_gpio_ebu(ARV452CPW_EBU);
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv452cpw_gpio_leds), arv452cpw_gpio_leds);
+	arv_load_nor(0x400000);
+	ltq_register_pci(&ltq_pci_data);
+	xway_register_dwc(ARV452CPW_USB);
+	arv_register_ethernet(ARV452CPW_MAC_ADDR);
+	arv_register_ath5k(ARV452CPW_ATH_ADDR, ARV452CPW_MAC_ADDR);
+        ltq_register_ath5k(arv_ath5k_eeprom_data, arv_athxk_eeprom_mac);
+
+	gpio_request(ARV452CPW_SWITCH_RESET, "switch");
+	gpio_set_value(ARV452CPW_SWITCH_RESET, 1);
+	gpio_export(ARV452CPW_SWITCH_RESET, 0);
+
+	gpio_request(ARV452CPW_RELAY1, "relay1");
+	gpio_direction_output(ARV452CPW_RELAY1, 1);
+	gpio_export(ARV452CPW_RELAY1, 0);
+
+	gpio_request(ARV452CPW_RELAY2, "relay2");
+	gpio_set_value(ARV452CPW_RELAY2, 1);
+	gpio_export(ARV452CPW_RELAY2, 0);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_ARV452CPW,
+			"ARV452CPW",
+			"ARV452CPW - Arcor A801",
+			arv452Cpw_init);
+
+static void __init
+arv4525pw_init(void)
+{
+#define ARV4525PW_ATH_ADDR		0x3f0400
+#define ARV4525PW_MADWIFI_ADDR		0xb03f0400
+#define ARV4525PW_MAC_ADDR		0x3f0016
+
+	arv_load_nor(0x400000);
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4525pw_gpio_leds), arv4525pw_gpio_leds);
+	gpio_request_array(arv4525pw_gpios, ARRAY_SIZE(arv4525pw_gpios));
+	gpio_export(ARV4525PW_RELAY, false);
+	gpio_export(ARV4525PW_PHYRESET, false);
+	ltq_pci_data.clock = PCI_CLOCK_INT;
+	ltq_register_pci(&ltq_pci_data);
+	arv_register_ath5k(ARV4525PW_ATH_ADDR, ARV4525PW_MADWIFI_ADDR);
+	ltq_register_ath5k(arv_ath5k_eeprom_data, arv_athxk_eeprom_mac);
+	ltq_eth_data.mii_mode = PHY_INTERFACE_MODE_MII;
+	arv_register_ethernet(ARV4525PW_MAC_ADDR);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_ARV4525PW,
+			"ARV4525PW",
+			"ARV4525PW - Speedport W502V",
+			arv4525pw_init);
+
+static void __init
+arv7525pw_init(void)
+{
+#define ARV7525P_MAC_ADDR	0x3f0016
+
+	arv_load_nor(0x400000);
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4525pw_gpio_leds), arv4525pw_gpio_leds);
+	ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL,
+				ARRAY_SIZE(arv7525pw_gpio_keys), arv7525pw_gpio_keys);
+	ltq_pci_data.clock = PCI_CLOCK_INT;
+	ltq_pci_data.gpio = PCI_GNT1 | PCI_EXIN1;
+	ltq_pci_data.irq[14] = (INT_NUM_IM3_IRL0 + 31);
+	ltq_register_pci(&ltq_pci_data);
+	ltq_eth_data.mii_mode = PHY_INTERFACE_MODE_MII;
+	ltq_register_rt2x00("RT2860.eeprom");
+	ltq_register_tapi();
+	arv_register_ethernet(ARV7525P_MAC_ADDR);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_ARV7525PW,
+			"ARV7525PW",
+			"ARV7525PW - Speedport W303V",
+			arv7525pw_init);
+
+static void __init
+arv7518pw_init(void)
+{
+#define ARV7518PW_EBU			0x2
+#define ARV7518PW_USB			14
+#define ARV7518PW_SWITCH_RESET		13
+#define ARV7518PW_ATH_ADDR		0x7f0400
+#define ARV7518PW_MAC_ADDR		0x7f0016
+
+	arv_load_nor(0x800000);
+	ltq_register_gpio_ebu(ARV7518PW_EBU);
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv7518pw_gpio_leds), arv7518pw_gpio_leds);
+	ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL,
+				ARRAY_SIZE(arv7518pw_gpio_keys), arv7518pw_gpio_keys);
+	ltq_register_pci(&ltq_pci_data);
+	ltq_register_tapi();
+	xway_register_dwc(ARV7518PW_USB);
+	arv_register_ethernet(ARV7518PW_MAC_ADDR);
+	arv_register_ath9k(ARV7518PW_ATH_ADDR, ARV7518PW_MAC_ADDR);
+	ltq_register_ath9k(arv_ath9k_eeprom_data, arv_athxk_eeprom_mac);
+	ltq_pci_ath_fixup(14, arv_ath9k_eeprom_data);
+
+	gpio_request(ARV7518PW_SWITCH_RESET, "switch");
+	gpio_direction_output(ARV7518PW_SWITCH_RESET, 1);
+	gpio_export(ARV7518PW_SWITCH_RESET, 0);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_ARV7518PW,
+			"ARV7518PW",
+			"ARV7518PW - ASTORIA",
+			arv7518pw_init);
+
+static void __init
+arv752dpw22_init(void)
+{
+#define ARV752DPW22_EBU			0x2
+#define ARV752DPW22_USB			100
+#define ARV752DPW22_RELAY		101
+#define ARV752DPW22_MAC_ADDR		0x7f0016
+
+	arv_load_nor(0x800000);
+	ltq_register_gpio_ebu(ARV752DPW22_EBU);
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv752dpw22_gpio_leds), arv752dpw22_gpio_leds);
+	ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL,
+				ARRAY_SIZE(arv752dpw22_gpio_keys), arv752dpw22_gpio_keys);
+	ltq_pci_data.irq[15] = (INT_NUM_IM3_IRL0 + 31);
+	ltq_pci_data.gpio |= PCI_EXIN1 | PCI_REQ2;
+	ltq_register_pci(&ltq_pci_data);
+	xway_register_dwc(ARV752DPW22_USB);
+	arv_register_ethernet(ARV752DPW22_MAC_ADDR);
+
+	gpio_request(ARV752DPW22_RELAY, "relay");
+	gpio_set_value(ARV752DPW22_RELAY, 1);
+	gpio_export(ARV752DPW22_RELAY, 0);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_ARV752DPW22,
+			"ARV752DPW22",
+			"ARV752DPW22 - Arcor A803",
+			arv752dpw22_init);
+
+static void __init
+arv752dpw_init(void)
+{
+#define ARV752DPW22_EBU			0x2
+#define ARV752DPW22_USB			100
+#define ARV752DPW22_RELAY		101
+#define ARV752DPW22_MAC_ADDR		0x7f0016
+
+	arv_load_nor(0x800000);
+	ltq_register_gpio_ebu(ARV752DPW22_EBU);
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv752dpw22_gpio_leds), arv752dpw22_gpio_leds);
+	ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(arv752dpw22_gpio_keys), arv752dpw22_gpio_keys);
+	ltq_pci_data.irq[14] = (INT_NUM_IM3_IRL0 + 31);
+	ltq_pci_data.gpio |= PCI_EXIN1 | PCI_REQ2;
+	ltq_register_pci(&ltq_pci_data);
+	xway_register_dwc(ARV752DPW22_USB);
+	ltq_register_rt2x00("RT2860.eeprom");
+	arv_register_ethernet(ARV752DPW22_MAC_ADDR);
+	gpio_request(ARV752DPW22_RELAY, "relay");
+	gpio_set_value(ARV752DPW22_RELAY, 1);
+	gpio_export(ARV752DPW22_RELAY, 0);
+
+}
+
+MIPS_MACHINE(LANTIQ_MACH_ARV752DPW,
+			"ARV752DPW",
+			"ARV752DPW - Arcor A802",
+			arv752dpw_init);
diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-bthomehubv2b.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-bthomehubv2b.c
new file mode 100644
index 0000000000..44fe2f4efe
--- /dev/null
+++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-bthomehubv2b.c
@@ -0,0 +1,542 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2011 Andrej Vlašić
+ *  Copyright (C) 2011 Luka Perkov
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/ath5k_platform.h>
+#include <linux/ath9k_platform.h>
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/io.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+
+#include <irq.h>
+#include <lantiq_soc.h>
+#include <lantiq_platform.h>
+#include <dev-gpio-leds.h>
+#include <dev-gpio-buttons.h>
+
+#include "../machtypes.h"
+//#include "dev-wifi-ath9k.h"
+#include "devices.h"
+#include "dev-dwc_otg.h"
+
+#undef USE_BTHH_GPIO_INIT
+
+// this reads certain data from u-boot if it's there
+#define USE_UBOOT_ENV_DATA
+
+#define UBOOT_ENV_OFFSET	0x040000
+#define UBOOT_ENV_SIZE		0x010000
+
+#ifdef NAND_ORGLAYOUT
+// this is only here for reference
+// definition of NAND flash area
+static struct mtd_partition bthomehubv2b_nand_partitions[] =
+{
+	{
+		.name	= "ART",
+		.offset	= 0x0000000,
+		.size	= 0x0004000,
+	},
+	{
+		.name	= "image1",
+		.offset	= 0x0004000,
+		.size	= 0x0E00000,
+	},
+	{
+		.name	= "unknown1",
+		.offset	= 0x0E04000,
+		.size	= 0x00FC000,
+	},
+	{
+		.name	= "image2",
+		.offset	= 0x0F00000,
+		.size	= 0x0E00000,
+	},
+	{
+		.name	= "unknown2",
+		.offset	= 0x1D00000,
+		.size	= 0x0300000,
+	},
+
+};
+#endif
+
+#ifdef NAND_KEEPOPENRG
+// this allows both firmwares to co-exist
+
+static struct mtd_partition bthomehubv2b_nand_partitions[] =
+{
+	{
+		.name	= "art",
+		.offset	= 0x0000000,
+		.size	= 0x0004000,
+	},
+	{
+		.name	= "Image1",
+		.offset	= 0x0004000,
+		.size	= 0x0E00000,
+	},
+	{
+		.name	= "linux",
+		.offset	= 0x0E04000,
+		.size	= 0x11fC000,
+	},
+	{
+		.name	= "wholeflash",
+		.offset	= 0x0000000,
+		.size	= 0x2000000,
+	},
+
+};
+#endif
+
+// this gives more jffs2 by overwriting openrg
+
+static struct mtd_partition bthomehubv2b_nand_partitions[] =
+{
+	{
+		.name	= "art",
+		.offset	= 0x0000000,
+		.size	= 0x0004000,
+	},
+	{
+		.name	= "linux",
+		.offset	= 0x0004000,
+		.size	= 0x1ffC000,
+	},
+	{
+		.name	= "wholeflash",
+		.offset	= 0x0000000,
+		.size	= 0x2000000,
+	},
+
+};
+
+extern void __init xway_register_nand(struct mtd_partition *parts, int count);
+
+// end BTHH_USE_NAND
+
+static struct gpio_led
+bthomehubv2b_gpio_leds[] __initdata = {
+
+	{ .name = "soc:orange:upgrading", 	.gpio = 213, },
+	{ .name = "soc:orange:phone", 		.gpio = 214, },
+	{ .name = "soc:blue:phone", 		.gpio = 215, },
+	{ .name = "soc:orange:wireless", 	.gpio = 216, },
+	{ .name = "soc:blue:wireless", 		.gpio = 217, },
+	{ .name = "soc:red:broadband", 		.gpio = 218, },
+	{ .name = "soc:orange:broadband", 	.gpio = 219, },
+	{ .name = "soc:blue:broadband", 	.gpio = 220, },
+	{ .name = "soc:red:power", 		.gpio = 221, },
+	{ .name = "soc:orange:power", 		.gpio = 222, },
+	{ .name = "soc:blue:power", 		.gpio = 223, },
+};
+
+static struct gpio_keys_button
+bthomehubv2b_gpio_keys[] __initdata = {
+	{
+		.desc		= "restart",
+		.type		= EV_KEY,
+		.code		= BTN_0,
+		.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= 2,
+		.active_low	= 1,
+	},
+	{
+		.desc		= "findhandset",
+		.type		= EV_KEY,
+		.code		= BTN_1,
+		.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= 15,
+		.active_low	= 1,
+	},
+	{
+		.desc		= "wps",
+		.type		= EV_KEY,
+		.code		= BTN_2,
+		.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= 22,
+		.active_low	= 1,
+	},
+};
+
+// definition of NOR flash area - as per original.
+static struct mtd_partition bthomehubv2b_partitions[] =
+{
+	{
+		.name	= "uboot",
+		.offset	= 0x000000,
+		.size	= 0x040000,
+	},
+	{
+		.name	= "uboot_env",
+		.offset	= UBOOT_ENV_OFFSET,
+		.size	= UBOOT_ENV_SIZE,
+	},
+	{
+		.name	= "rg_conf_1",
+		.offset	= 0x050000,
+		.size	= 0x010000,
+	},
+	{
+		.name	= "rg_conf_2",
+		.offset	= 0x060000,
+		.size	= 0x010000,
+	},
+	{
+		.name	= "rg_conf_factory",
+		.offset	= 0x070000,
+		.size	= 0x010000,
+	},
+};
+
+
+/* nor flash */
+/* bt homehubv2b has a very small nor flash */
+/* so make it look for a small one, else we get a lot of alias chips identified - */
+/* not a bug problem, but fills the logs. */
+static struct resource bthhv2b_nor_resource =
+	MEM_RES("nor", LTQ_FLASH_START, 0x80000);
+
+static struct platform_device ltq_nor = {
+	.name		= "ltq_nor",
+	.resource	= &bthhv2b_nor_resource,
+	.num_resources	= 1,
+};
+
+static void __init bthhv2b_register_nor(struct physmap_flash_data *data)
+{
+	ltq_nor.dev.platform_data = data;
+	platform_device_register(&ltq_nor);
+}
+
+static struct physmap_flash_data bthomehubv2b_flash_data = {
+	.nr_parts	= ARRAY_SIZE(bthomehubv2b_partitions),
+	.parts		= bthomehubv2b_partitions,
+};
+
+
+
+
+static struct ltq_pci_data ltq_pci_data = {
+	.clock	= PCI_CLOCK_INT,
+	.gpio	= PCI_GNT1 | PCI_REQ1,
+	.irq	= { [14] = INT_NUM_IM0_IRL0 + 22, },
+};
+
+
+
+
+static struct ltq_eth_data ltq_eth_data = {
+	.mii_mode	= PHY_INTERFACE_MODE_MII,
+};
+
+
+
+
+static char __init *get_uboot_env_var(char *haystack, int haystack_len, char *needle, int needle_len) {
+	int i;
+	for (i = 0; i <= haystack_len - needle_len; i++) {
+		if (memcmp(haystack + i, needle, needle_len) == 0) {
+			return haystack + i + needle_len;
+		}
+	}
+	return NULL;
+}
+
+/*
+ * bthomehubv2b_parse_hex_* are not uniq. in arm/orion there are also duplicates:
+ * dns323_parse_hex_*
+ * TODO: one day write a patch for this :)
+ */
+static int __init bthomehubv2b_parse_hex_nibble(char n) {
+	if (n >= '0' && n <= '9')
+		return n - '0';
+
+	if (n >= 'A' && n <= 'F')
+		return n - 'A' + 10;
+
+	if (n >= 'a' && n <= 'f')
+		return n - 'a' + 10;
+
+	return -1;
+}
+
+static int __init bthomehubv2b_parse_hex_byte(const char *b) {
+	int hi;
+	int lo;
+
+	hi = bthomehubv2b_parse_hex_nibble(b[0]);
+	lo = bthomehubv2b_parse_hex_nibble(b[1]);
+
+	if (hi < 0 || lo < 0)
+		return -1;
+
+	return (hi << 4) | lo;
+}
+
+static int __init bthomehubv2b_register_ethernet(void) {
+	u_int8_t addr[6];
+	int i;
+	char *mac = "01:02:03:04:05:06";
+	int gotmac = 0;
+	char *boardid = "BTHHV2B";
+	int gotboardid = 0;
+
+	char *uboot_env_page;
+	uboot_env_page = ioremap(LTQ_FLASH_START + UBOOT_ENV_OFFSET, UBOOT_ENV_SIZE);
+	if (uboot_env_page)
+	{
+		char *Data = NULL;
+		Data = get_uboot_env_var(uboot_env_page, UBOOT_ENV_SIZE, "\0ethaddr=", 9);
+		if (Data)
+		{
+			mac = Data;
+		}
+
+		Data = get_uboot_env_var(uboot_env_page, UBOOT_ENV_SIZE, "\0boardid=", 9);
+
+		if (Data)
+			boardid = Data;
+	}
+	else
+	{
+		printk("bthomehubv2b: Failed to get uboot_env_page");
+	}
+
+	if (!mac) {
+	goto error_fail;
+	}
+
+	if (!boardid) {
+	goto error_fail;
+	}
+
+	/* Sanity check the string we're looking at */
+	for (i = 0; i < 5; i++) {
+	if (*(mac + (i * 3) + 2) != ':') {
+		goto error_fail;
+		}
+	}
+
+	for (i = 0; i < 6; i++) {
+		int byte;
+		byte = bthomehubv2b_parse_hex_byte(mac + (i * 3));
+		if (byte < 0) {
+			goto error_fail;
+		}
+		addr[i] = byte;
+	}
+
+	if (gotmac)
+		printk("bthomehubv2b: Found ethernet MAC address: ");
+	else
+		printk("bthomehubv2b: using default MAC (pls set ethaddr in u-boot): ");
+
+	for (i = 0; i < 6; i++)
+		printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
+
+	memcpy(&ltq_eth_data.mac.sa_data, addr, 6);
+	ltq_register_etop(&ltq_eth_data);
+
+	//memcpy(&bthomehubv2b_ath5k_eeprom_mac, addr, 6);
+	//bthomehubv2b_ath5k_eeprom_mac[5]++;
+
+	if (gotboardid)
+		printk("bthomehubv2b: Board id is %s.", boardid);
+	else
+		printk("bthomehubv2b: Default Board id is %s.", boardid);
+
+	if (strncmp(boardid, "BTHHV2B", 7) == 0) {
+		// read in dev-wifi-ath9k
+		//memcpy(&bthomehubv2b_ath5k_eeprom_data, sx763_eeprom_data, ATH5K_PLAT_EEP_MAX_WORDS);
+	}
+	else {
+		printk("bthomehubv2b: Board id is unknown, fix uboot_env data.");
+	}
+
+
+	// should not unmap while we are using the ram?
+	if (uboot_env_page)
+		iounmap(uboot_env_page);
+
+	return 0;
+
+error_fail:
+	if (uboot_env_page)
+		iounmap(uboot_env_page);
+	return -EINVAL;
+}
+
+
+#define PORTA2_HW_PASS1 0
+#define PORTA2_HW_PASS1_SC14480 1
+#define PORTA2_HW_PASS2 2
+
+int porta2_hw_revision = -1;
+EXPORT_SYMBOL(porta2_hw_revision);
+
+#define LTQ_GPIO_OUT		0x00
+#define LTQ_GPIO_IN		0x04
+#define LTQ_GPIO_DIR		0x08
+#define LTQ_GPIO_ALTSEL0	0x0C
+#define LTQ_GPIO_ALTSEL1	0x10
+#define LTQ_GPIO_OD		0x14
+#define LTQ_GPIO_PUDSEL		0x1C
+#define LTQ_GPIO_PUDEN		0x20
+
+#ifdef USE_BTHH_GPIO_INIT
+static void bthomehubv2b_board_prom_init(void)
+{
+	int revision = 0;
+	unsigned int gpio = 0;
+	void __iomem *mem = ioremap(LTQ_GPIO0_BASE_ADDR, LTQ_GPIO_SIZE*2);
+
+#define DANUBE_GPIO_P0_OUT (unsigned short *)(mem + LTQ_GPIO_OUT)
+#define DANUBE_GPIO_P0_IN (unsigned short *)(mem + LTQ_GPIO_IN)
+#define DANUBE_GPIO_P0_DIR (unsigned short *)(mem + LTQ_GPIO_DIR)
+#define DANUBE_GPIO_P0_ALTSEL0 (unsigned short *)(mem + LTQ_GPIO_ALTSEL0)
+#define DANUBE_GPIO_P0_ALTSEL1 (unsigned short *)(mem + LTQ_GPIO_ALTSEL1)
+
+#define DANUBE_GPIO_P1_OUT (unsigned short *)(mem + LTQ_GPIO_SIZE + LTQ_GPIO_OUT)
+#define DANUBE_GPIO_P1_IN (unsigned short *)(mem + LTQ_GPIO_SIZE + LTQ_GPIO_IN)
+#define DANUBE_GPIO_P1_DIR (unsigned short *)(mem + LTQ_GPIO_SIZE + LTQ_GPIO_DIR)
+#define DANUBE_GPIO_P1_ALTSEL0 (unsigned short *)(mem + LTQ_GPIO_SIZE + LTQ_GPIO_ALTSEL0)
+#define DANUBE_GPIO_P1_ALTSEL1 (unsigned short *)(mem + LTQ_GPIO_SIZE + LTQ_GPIO_ALTSEL1)
+#define DANUBE_GPIO_P1_OD (unsigned short *)(mem + LTQ_GPIO_SIZE + LTQ_GPIO_OD)
+
+	printk("About to sense board using GPIOs at %8.8X\n", (unsigned int)mem);
+
+
+	/* First detect HW revision of the board. For that we need to set the GPIO
+	 * lines according to table 7.2.1/7.2.2 in HSI */
+	*DANUBE_GPIO_P0_OUT = 0x0200;
+	*DANUBE_GPIO_P0_DIR = 0x2610;
+	*DANUBE_GPIO_P0_ALTSEL0 = 0x7812;
+	*DANUBE_GPIO_P0_ALTSEL1 = 0x0000;
+
+	*DANUBE_GPIO_P1_OUT = 0x7008;
+	*DANUBE_GPIO_P1_DIR = 0xF3AE;
+	*DANUBE_GPIO_P1_ALTSEL0 = 0x83A7;
+	*DANUBE_GPIO_P1_ALTSEL1 = 0x0400;
+
+	gpio = (*DANUBE_GPIO_P0_IN & 0xFFFF) | 
+		((*DANUBE_GPIO_P1_IN & 0xFFFF) << 16);
+
+	revision |= (gpio & (1 << 27)) ? (1 << 0) : 0;
+	revision |= (gpio & (1 << 20)) ? (1 << 1) : 0;
+	revision |= (gpio & (1 << 8)) ? (1 << 2) : 0;
+	revision |= (gpio & (1 << 6)) ? (1 << 3) : 0;
+	revision |= (gpio & (1 << 5)) ? (1 << 4) : 0;
+	revision |= (gpio & (1 << 0)) ? (1 << 5) : 0;
+
+	porta2_hw_revision = revision;
+	printk("PORTA2: detected HW revision %d\n", revision);
+
+	/* Set GPIO lines according to HW revision. */
+	/* !!! Note that we are setting SPI_CS5 (GPIO 9) to be GPIO out with value
+	 * of HIGH since the FXO does not use the SPI CS mechanism, it does it
+	 * manually by controlling the GPIO line. We need the CS line to be disabled
+	 * (HIGH) until needed since it will intefere with other devices on the SPI
+	 * bus. */
+	*DANUBE_GPIO_P0_OUT = 0x0200;
+	/*
+	 * During the manufacturing process a different machine takes over uart0
+	 * so set it as input (so it wouldn't drive the line)
+	 */
+#define cCONFIG_SHC_BT_MFG_TEST 0
+	*DANUBE_GPIO_P0_DIR = 0x2671 | (cCONFIG_SHC_BT_MFG_TEST ? 0 : (1 << 12));
+
+	if (revision == PORTA2_HW_PASS1_SC14480 || revision == PORTA2_HW_PASS2)
+		*DANUBE_GPIO_P0_ALTSEL0 = 0x7873;
+	else
+		*DANUBE_GPIO_P0_ALTSEL0 = 0x3873;
+
+	*DANUBE_GPIO_P0_ALTSEL1 = 0x0001;
+
+
+	//###################################################################################    
+	// Register values before patch
+	// P1_ALTSEL0 = 0x83A7
+	// P1_ALTSEL1 = 0x0400
+	// P1_OU	T     = 0x7008
+	// P1_DIR     = 0xF3AE
+	// P1_OD      = 0xE3Fc
+	printk("\nApplying Patch for CPU1 IRQ Issue\n");
+	*DANUBE_GPIO_P1_ALTSEL0 &= ~(1<<12);  // switch P1.12 (GPIO28) to GPIO functionality
+	*DANUBE_GPIO_P1_ALTSEL1 &= ~(1<<12);  // switch P1.12 (GPIO28) to GPIO functionality
+	*DANUBE_GPIO_P1_OUT     &= ~(1<<12);  // set P1.12 (GPIO28) to 0
+	*DANUBE_GPIO_P1_DIR     |= (1<<12);   // configure P1.12 (GPIO28) as output 
+	*DANUBE_GPIO_P1_OD      |= (1<<12);   // activate Push/Pull mode 
+	udelay(100);			      // wait a little bit (100us)
+	*DANUBE_GPIO_P1_OD      &= ~(1<<12);  // switch back from Push/Pull to Open Drain
+	// important: before! setting output to 1 (3,3V) the mode must be switched 
+	// back to Open Drain because the reset pin of the SC14488 is internally 
+	// pulled to 1,8V
+	*DANUBE_GPIO_P1_OUT     |= (1<<12);   // set output P1.12 (GPIO28) to 1
+	// Register values after patch, should be the same as before
+	// P1_ALTSEL0 = 0x83A7
+	// P1_ALTSEL1 = 0x0400
+	// P1_OUT     = 0x7008
+	// P1_DIR     = 0xF3AE
+	// P1_OD      = 0xE3Fc
+	//###################################################################################
+
+
+	*DANUBE_GPIO_P1_OUT = 0x7008;
+	*DANUBE_GPIO_P1_DIR = 0xEBAE | (revision == PORTA2_HW_PASS2 ? 0x1000 : 0);
+	*DANUBE_GPIO_P1_ALTSEL0 = 0x8BA7;
+	*DANUBE_GPIO_P1_ALTSEL1 = 0x0400;
+
+	iounmap(mem);
+}
+#endif
+static void __init bthomehubv2b_init(void) {
+#define bthomehubv2b_USB		13
+
+	// read the board version
+#ifdef USE_BTHH_GPIO_INIT
+	bthomehubv2b_board_prom_init();
+#endif
+
+	// register extra GPPOs used by LEDs as GPO 0x200+
+	ltq_register_gpio_stp();
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(bthomehubv2b_gpio_leds), bthomehubv2b_gpio_leds);
+	bthhv2b_register_nor(&bthomehubv2b_flash_data);
+	xway_register_nand(bthomehubv2b_nand_partitions, ARRAY_SIZE(bthomehubv2b_nand_partitions));
+	ltq_register_pci(&ltq_pci_data);
+	ltq_register_tapi();
+	ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(bthomehubv2b_gpio_keys), bthomehubv2b_gpio_keys);
+//	ltq_register_ath9k();
+	xway_register_dwc(bthomehubv2b_USB);
+	bthomehubv2b_register_ethernet();
+
+}
+
+MIPS_MACHINE(LANTIQ_MACH_BTHOMEHUBV2BOPENRG,
+	"BTHOMEHUBV2BOPENRG",
+	"BTHOMEHUBV2B - BT Homehub V2.0 Type B with OpenRG image retained",
+	bthomehubv2b_init);
+
+MIPS_MACHINE(LANTIQ_MACH_BTHOMEHUBV2B,
+	"BTHOMEHUBV2B",
+	"BTHOMEHUBV2B - BT Homehub V2.0 Type B",
+	bthomehubv2b_init);
diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-easy50601.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-easy50601.c
new file mode 100644
index 0000000000..a5a01057a3
--- /dev/null
+++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-easy50601.c
@@ -0,0 +1,57 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+
+#include <lantiq.h>
+
+#include "../machtypes.h"
+#include "devices.h"
+
+static struct mtd_partition easy50601_partitions[] = {
+	{
+		.name	= "uboot",
+		.offset	= 0x0,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "uboot_env",
+		.offset	= 0x10000,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "linux",
+		.offset	= 0x20000,
+		.size	= 0x3d0000,
+	},
+};
+
+static struct physmap_flash_data easy50601_flash_data = {
+	.nr_parts	= ARRAY_SIZE(easy50601_partitions),
+	.parts		= easy50601_partitions,
+};
+
+static struct ltq_eth_data ltq_eth_data = {
+	.mii_mode = -1, /* use EPHY */
+};
+
+static void __init easy50601_init(void)
+{
+	ltq_register_nor(&easy50601_flash_data);
+	ltq_register_etop(&ltq_eth_data);
+}
+
+MIPS_MACHINE(LTQ_MACH_EASY50601,
+			"EASY50601",
+			"EASY50601 Eval Board",
+			easy50601_init);
diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-easy50712.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-easy50712.c
new file mode 100644
index 0000000000..2fddfca6db
--- /dev/null
+++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-easy50712.c
@@ -0,0 +1,70 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/phy.h>
+
+#include <lantiq_soc.h>
+#include <irq.h>
+
+#include "../machtypes.h"
+#include "devices.h"
+
+static struct mtd_partition easy50712_partitions[] = {
+	{
+		.name	= "uboot",
+		.offset	= 0x0,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "uboot_env",
+		.offset	= 0x10000,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "linux",
+		.offset	= 0x20000,
+		.size	= 0x3d0000,
+	},
+};
+
+static struct physmap_flash_data easy50712_flash_data = {
+	.nr_parts	= ARRAY_SIZE(easy50712_partitions),
+	.parts		= easy50712_partitions,
+};
+
+static struct ltq_pci_data ltq_pci_data = {
+	.clock	= PCI_CLOCK_INT,
+	.gpio	= PCI_GNT1 | PCI_REQ1,
+	.irq	= {
+		[14] = INT_NUM_IM0_IRL0 + 22,
+	},
+};
+
+static struct ltq_eth_data ltq_eth_data = {
+	.mii_mode = PHY_INTERFACE_MODE_MII,
+};
+
+static void __init easy50712_init(void)
+{
+	ltq_register_gpio_stp();
+	ltq_register_nor(&easy50712_flash_data);
+	ltq_register_pci(&ltq_pci_data);
+	ltq_register_etop(&ltq_eth_data);
+	ltq_register_tapi();
+}
+
+MIPS_MACHINE(LTQ_MACH_EASY50712,
+	     "EASY50712",
+	     "EASY50712 Eval Board",
+	      easy50712_init);
diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-fritz_ar9.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-fritz_ar9.c
new file mode 100644
index 0000000000..503e4bebe3
--- /dev/null
+++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-fritz_ar9.c
@@ -0,0 +1,114 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/phy.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/flash.h>
+
+#include <lantiq_soc.h>
+#include <irq.h>
+
+#include "../machtypes.h"
+#include "devices.h"
+#include "dev-ifxhcd.h"
+#include "dev-gpio-leds.h"
+#include "dev-gpio-buttons.h"
+
+static struct mtd_partition fritz7320_partitions[] = {
+	{
+		.name	= "urlader",
+		.offset	= 0x0,
+		.size	= 0x20000,
+	},
+	{
+		.name	= "linux",
+		.offset	= 0x20000,
+		.size	= 0xf60000,
+	},
+	{
+		.name	= "tffs (1)",
+		.offset	= 0xf80000,
+		.size	= 0x40000,
+	},
+	{
+		.name	= "tffs (2)",
+		.offset	= 0xfc0000,
+		.size	= 0x40000,
+	},
+};
+
+static struct physmap_flash_data fritz7320_flash_data = {
+	.nr_parts	= ARRAY_SIZE(fritz7320_partitions),
+	.parts		= fritz7320_partitions,
+};
+
+static struct gpio_led
+fritz7320_gpio_leds[] __initdata = {
+	{ .name = "soc:green:power", .gpio = 44, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:internet", .gpio = 47, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:dect", .gpio = 38, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:wlan", .gpio = 37, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:dual1", .gpio = 35, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:red:dual2", .gpio = 45, .active_low = 1, .default_trigger = "default-on" },
+};
+
+static struct gpio_keys_button
+fritz7320_gpio_keys[] __initdata = {
+	{
+		.desc = "wifi",
+		.type = EV_KEY,
+		.code = BTN_0,
+		.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+		.gpio = 1,
+		.active_low = 1,
+	},
+	{
+		.desc = "dect",
+		.type = EV_KEY,
+		.code = BTN_1,
+		.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+		.gpio = 2,
+		.active_low = 1,
+	},
+};
+
+static struct ltq_pci_data ltq_pci_data = {
+	.clock  = PCI_CLOCK_INT,
+	.gpio   = PCI_GNT1 | PCI_REQ1,
+	.irq    = {
+		[14] = INT_NUM_IM0_IRL0 + 22,
+	},
+};
+
+static struct ltq_eth_data ltq_eth_data = {
+	.mii_mode	= PHY_INTERFACE_MODE_RMII,
+};
+
+static int usb_pins[2] = { 50, 51 };
+
+static void __init fritz7320_init(void)
+{
+	ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL,
+		ARRAY_SIZE(fritz7320_gpio_keys), fritz7320_gpio_keys);
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(fritz7320_gpio_leds), fritz7320_gpio_leds);
+	ltq_register_pci(&ltq_pci_data);
+	ltq_register_etop(&ltq_eth_data);
+	ltq_register_nor(&fritz7320_flash_data);
+	xway_register_hcd(usb_pins);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_FRITZ7320,
+	     "FRITZ7320",
+	     "FRITZ!BOX 7320",
+	      fritz7320_init);
diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-fritz_vr9.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-fritz_vr9.c
new file mode 100644
index 0000000000..4a38988380
--- /dev/null
+++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-fritz_vr9.c
@@ -0,0 +1,163 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/phy.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/flash.h>
+
+#include <lantiq_soc.h>
+#include <irq.h>
+
+#include "../machtypes.h"
+#include "devices.h"
+#include "dev-ifxhcd.h"
+#include "dev-gpio-leds.h"
+#include "dev-gpio-buttons.h"
+
+static struct mtd_partition fritz3370_partitions[] = {
+	{
+		.name	= "linux",
+		.offset	= 0x0,
+		.size	= 0x400000,
+	},
+	{
+		.name	= "filesystem",
+		.offset	= 0x400000,
+		.size	= 0x3000000,
+	},
+	{
+		.name	= "reserved-kernel",
+		.offset	= 0x3400000,
+		.size	= 0x400000,
+	},
+	{
+		.name	= "reserved",
+		.offset	= 0x3800000,
+		.size	= 0x3000000,
+	},
+	{
+		.name	= "config",
+		.offset	= 0x6800000,
+		.size	= 0x200000,
+	},
+	{
+		.name	= "nand-filesystem",
+		.offset	= 0x6a00000,
+		.size	= 0x1600000,
+	},
+};
+
+static struct mtd_partition spi_flash_partitions[] = {
+	{
+		.name	= "urlader",
+		.offset	= 0x0,
+		.size	= 0x20000,
+	},
+	{
+		.name	= "tffs",
+		.offset	= 0x20000,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "tffs",
+		.offset	= 0x30000,
+		.size	= 0x10000,
+	},
+};
+
+static struct gpio_led
+fritz3370_gpio_leds[] __initdata = {
+	{ .name = "soc:green:1", .gpio = 32, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:red:2", .gpio = 33, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:red:3", .gpio = 34, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:4", .gpio = 35, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:5", .gpio = 36, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:green:6", .gpio = 47, .active_low = 1, .default_trigger = "default-on" },
+};
+
+static struct gpio_keys_button
+fritz3370_gpio_keys[] __initdata = {
+	{
+		.desc = "wifi",
+		.type = EV_KEY,
+		.code = BTN_0,
+		.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+		.gpio = 29,
+		.active_low = 1,
+	},
+};
+
+static struct ltq_eth_data ltq_eth_data = {
+	.mii_mode	= PHY_INTERFACE_MODE_RMII,
+};
+
+static int usb_pins[2] = { 5, 14 };
+
+#define SPI_GPIO_MRST	16
+#define SPI_GPIO_MTSR	17
+#define SPI_GPIO_CLK	18
+#define SPI_GPIO_CS0	10
+
+static struct spi_gpio_platform_data spi_gpio_data = {
+	.sck		= SPI_GPIO_CLK,
+	.mosi		= SPI_GPIO_MTSR,
+	.miso		= SPI_GPIO_MRST,
+	.num_chipselect	= 2,
+};
+
+static struct platform_device spi_gpio_device = {
+	.name			= "spi_gpio",
+	.dev.platform_data	= &spi_gpio_data,
+};
+
+static struct flash_platform_data spi_flash_data = {
+	.name		= "SPL",
+	.parts		= spi_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(spi_flash_partitions),
+};
+
+static struct spi_board_info spi_flash __initdata = {
+	.modalias               = "m25p80",
+	.bus_num                = 0,
+	.chip_select            = 0,
+	.max_speed_hz           = 10 * 1000 * 1000,
+	.mode                   = SPI_MODE_3,
+	.chip_select		= 0,
+	.controller_data	= (void *) SPI_GPIO_CS0,
+	.platform_data          = &spi_flash_data
+};
+
+static void __init
+spi_gpio_init(void)
+{
+	spi_register_board_info(&spi_flash, 1);
+	platform_device_register(&spi_gpio_device);
+}
+
+static void __init fritz3370_init(void)
+{
+	spi_gpio_init();
+	platform_device_register_simple("pcie-xway", 0, NULL, 0);
+	xway_register_nand(fritz3370_partitions, ARRAY_SIZE(fritz3370_partitions));
+	xway_register_hcd(usb_pins);
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(fritz3370_gpio_leds), fritz3370_gpio_leds);
+	ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL,
+		ARRAY_SIZE(fritz3370_gpio_keys), fritz3370_gpio_keys);
+	ltq_register_vrx200(&ltq_eth_data);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_FRITZ3370,
+	     "FRITZ3370",
+	     "FRITZ!BOX 3370",
+	      fritz3370_init);
diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-gigasx76x.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-gigasx76x.c
new file mode 100644
index 0000000000..c7a2de5017
--- /dev/null
+++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-gigasx76x.c
@@ -0,0 +1,166 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2011 Andrej Vlašić
+ *  Copyright (C) 2011 Luka Perkov
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/ath5k_platform.h>
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/io.h>
+#include <linux/if_ether.h>
+#include <linux/etherdevice.h>
+#include <linux/string.h>
+
+#include <irq.h>
+#include <lantiq_soc.h>
+#include <lantiq_platform.h>
+#include <dev-gpio-leds.h>
+#include <dev-gpio-buttons.h>
+
+#include "../machtypes.h"
+#include "dev-wifi-athxk.h"
+#include "devices.h"
+#include "dev-dwc_otg.h"
+
+#include "mach-gigasx76x.h"
+
+static u8 ltq_ethaddr[6] = { 0 };
+
+static int __init setup_ethaddr(char *str)
+{
+	if (!mac_pton(str, ltq_ethaddr))
+		memset(ltq_ethaddr, 0, 6);
+	return 0;
+}
+__setup("ethaddr=", setup_ethaddr);
+
+
+enum {
+	UNKNOWN = 0,
+	SX761,
+	SX762,
+	SX763,
+};
+static u8 board = SX763;
+
+static int __init setup_board(char *str)
+{
+	if (!strcmp(str, "sx761"))
+		board = SX761;
+	else if (!strcmp(str, "sx762"))
+		board = SX762;
+	else if (!strcmp(str, "sx763"))
+		board = SX763;
+	else
+		board = UNKNOWN;
+	return 0;
+}
+__setup("board=", setup_board);
+
+static struct mtd_partition gigasx76x_partitions[] =
+{
+	{
+		.name	= "uboot",
+		.offset	= 0x0,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "uboot_env",
+		.offset	= 0x10000,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "linux",
+		.offset	= 0x20000,
+		.size	= 0x7e0000,
+	},
+};
+
+static struct gpio_led
+gigasx76x_gpio_leds[] __initdata = {
+	{ .name = "soc:green:voip", .gpio = 216, },
+	{ .name = "soc:green:adsl", .gpio = 217, },
+	{ .name = "soc:green:usb", .gpio = 218, },
+	{ .name = "soc:green:wifi", .gpio = 219, },
+	{ .name = "soc:green:phone2", .gpio = 220, },
+	{ .name = "soc:green:phone1", .gpio = 221, },
+	{ .name = "soc:green:line", .gpio = 222, },
+	{ .name = "soc:green:online", .gpio = 223, },
+};
+
+static struct gpio_keys_button
+gigasx76x_gpio_keys[] __initdata = {
+	{
+		.desc		= "wps",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= 22,
+		.active_low	= 1,
+	},
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= BTN_0,
+		.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= 14,
+		.active_low	= 0,
+	},
+};
+
+static struct physmap_flash_data gigasx76x_flash_data = {
+	.nr_parts	= ARRAY_SIZE(gigasx76x_partitions),
+	.parts		= gigasx76x_partitions,
+};
+
+static struct ltq_pci_data ltq_pci_data = {
+	.clock	= PCI_CLOCK_INT,
+	.gpio	= PCI_GNT1 | PCI_REQ1,
+	.irq	= { [14] = INT_NUM_IM0_IRL0 + 22, },
+};
+
+static struct ltq_eth_data ltq_eth_data = {
+	.mii_mode	= PHY_INTERFACE_MODE_MII,
+};
+
+static void __init gigasx76x_init(void)
+{
+#define GIGASX76X_USB		29
+
+	ltq_register_gpio_stp();
+	ltq_register_nor(&gigasx76x_flash_data);
+	ltq_register_pci(&ltq_pci_data);
+	ltq_register_tapi();
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(gigasx76x_gpio_leds), gigasx76x_gpio_leds);
+	ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(gigasx76x_gpio_keys), gigasx76x_gpio_keys);
+	xway_register_dwc(GIGASX76X_USB);
+
+	if (!is_valid_ether_addr(ltq_ethaddr))
+		random_ether_addr(ltq_ethaddr);
+
+	memcpy(&ltq_eth_data.mac.sa_data, ltq_ethaddr, 6);
+	ltq_register_etop(&ltq_eth_data);
+	if (board == SX762) 
+		ltq_register_ath5k(sx762_eeprom_data, ltq_ethaddr);
+	else
+		ltq_register_ath5k(sx763_eeprom_data, ltq_ethaddr);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_GIGASX76X,
+			"GIGASX76X",
+			"GIGASX76X - Gigaset SX761,SX762,SX763",
+			gigasx76x_init);
diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-gigasx76x.h b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-gigasx76x.h
new file mode 100644
index 0000000000..c25a679978
--- /dev/null
+++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-gigasx76x.h
@@ -0,0 +1,208 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2011 Andrej Vlašić
+ *  Copyright (C) 2011 Luka Perkov
+ *
+ */
+
+#ifndef _MACH_GIGASX76X_H__
+#define _MACH_GIGASX76X_H__
+
+static u16 sx763_eeprom_data[ATH5K_PLAT_EEP_MAX_WORDS]=
+{
+0x0013,0x168c,0x0200,0x0001,0x0000,0x5001,0x0000,0x2051,0x2051,0x1c0a,0x0100,
+0x0000,0x01c2,0x0002,0xc606,0x0001,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0xf165,0x7fbe,0x0003,0x0000,
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x5aa5,0x0000,0x0000,0x0313,0x4943,
+0x2053,0x7104,0x1202,0x0400,0x0306,0x0001,0x0000,0x0500,0x410e,0x39b1,0x1eb5,
+0x4e2d,0x3056,0xffff,0xe902,0x0700,0x0106,0x0000,0x0100,0x1500,0x0752,0x4101,
+0x6874,0x7265,0x736f,0x4320,0x6d6f,0x756d,0x696e,0x6163,0x6974,0x6e6f,0x2c73,
+0x4920,0x636e,0x002e,0x5241,0x3035,0x3130,0x302d,0x3030,0x2d30,0x3030,0x3030,
+0x5700,0x7269,0x6c65,0x7365,0x2073,0x414c,0x204e,0x6552,0x6566,0x6572,0x636e,
+0x2065,0x6143,0x6472,0x3000,0x0030,0x00ff,0x2100,0x0602,0x2201,0x0205,0x8d80,
+0x005b,0x0522,0x4002,0x8954,0x2200,0x0205,0x1b00,0x00b7,0x0522,0x8002,0x12a8,
+0x2201,0x0205,0x3600,0x016e,0x0522,0x0002,0x2551,0x2202,0x0205,0x6c00,0x02dc,
+0x0522,0x8002,0x37f9,0x2203,0x0205,0xa200,0x044a,0x0222,0x0803,0x0822,0x0604,
+0x0300,0xbe7f,0x65f1,0x0222,0x0105,0x00ff,0x0000,0x0000,0x0000,0x0000,0x0000,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0x0037,0x971f,0x5003,0x9a66,0x0001,0x81c4,0x016a,
+0x02ff,0x84ff,0x15a3,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
+0x0000,0x0000,0x0000,0x2d2c,0x0000,0x0000,0x0000,0x0000,0xe028,0xa492,0x1c00,
+0x000e,0xb8ca,0x0013,0x0000,0x0000,0x6b4b,0xc059,0x1571,0x0000,0x0000,0x0000,
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
+0x2370,0x00a5,0x9618,0x419a,0x68a2,0xda35,0x001c,0x0007,0xb0ff,0x01b5,0x0000,
+0x0000,0xff70,0x19ff,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
+0x0000,0x0000,0x0000,0x0000,0x0000,0x3170,0x00a5,0x9618,0x419a,0x68a2,0xda35,
+0x001c,0x000e,0xb0ff,0x21b5,0x0000,0x2fd8,0xff70,0x1226,0x19ff,0x07be,0x6201,
+0x032e,0x0587,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x1112,
+0x1441,0x4231,0x3234,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
+0x0000,0x0000,0x0000,0x0000,0x8000,0x0000,0x0000,0x0000,0x0000,0x8000,0x0000,
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x4d31,0x7f54,0x3c93,0x1205,0x1931,
+0x492d,0x7f50,0x3c93,0x0e01,0x192d,0x0070,0x0000,0x8140,0x724b,0x2ba9,0x3a09,
+0x99d9,0x1949,0x0070,0x0000,0x80e0,0x624a,0x2af8,0x35c7,0x9d47,0x1938,0x0000,
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
+0x0000,0x0000,0x0000,0x0000,0x7082,0x0820,0xb882,0x0820,0x7092,0x28a0,0x8992,
+0x28a0,0xa292,0x28a0,0x70a2,0xa7ac,0x0000,0x0000,0x2464,0x6424,0x0000,0x0000,
+0x70a2,0xa7ac,0x0000,0x0000,0x2464,0x6424,0x0000,0x0000,0x8989,0x0000,0x0000,
+0x0000,0x2424,0x0000,0x0000,0x0000,0x7075,0xa2ac,0xb800,0x0000,0x2464,0x2424,
+0x2400,0x0000,0x7075,0xa2ac,0x0000,0x0000,0x2464,0x2424,0x0000,0x0000,0x7075,
+0xa7ac,0x0000,0x0000,0x2464,0x6424,0x0000,0x0000,0x7075,0xa7ac,0x0000,0x0000,
+0x2464,0x6424,0x0000,0x0000,0x8989,0x0000,0x0000,0x0000,0x2424,0x0000,0x0000,
+0x0000,0x0000,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff};
+
+static u16 sx762_eeprom_data[ATH5K_PLAT_EEP_MAX_WORDS]=
+{
+0x001a,0x168c,0x0200,0x0001,0x0000,0x5001,0x0000,0x2051,0x2051,0x1c0a,0x0100,
+0x0000,0x01c2,0x0002,0xc606,0x0001,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0xf165,0x7fbe,0x0003,0x0000,
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x5aa5,0x0000,0x0000,0x0313,0x4943,
+0x2053,0x7104,0x1202,0x0400,0x0306,0x0001,0x0000,0x0500,0x410e,0x39b1,0x1eb5,
+0x4e2d,0x3056,0xffff,0xe902,0x0700,0x0106,0x0000,0x0100,0x1500,0x0752,0x4101,
+0x6874,0x7265,0x736f,0x4320,0x6d6f,0x756d,0x696e,0x6163,0x6974,0x6e6f,0x2c73,
+0x4920,0x636e,0x002e,0x5241,0x3035,0x3130,0x302d,0x3030,0x2d30,0x3030,0x3030,
+0x5700,0x7269,0x6c65,0x7365,0x2073,0x414c,0x204e,0x6552,0x6566,0x6572,0x636e,
+0x2065,0x6143,0x6472,0x3000,0x0030,0x00ff,0x2100,0x0602,0x2201,0x0205,0x8d80,
+0x005b,0x0522,0x4002,0x8954,0x2200,0x0205,0x1b00,0x00b7,0x0522,0x8002,0x12a8,
+0x2201,0x0205,0x3600,0x016e,0x0522,0x0002,0x2551,0x2202,0x0205,0x6c00,0x02dc,
+0x0522,0x8002,0x37f9,0x2203,0x0205,0xa200,0x044a,0x0222,0x0803,0x0822,0x0604,
+0x0300,0xbe7f,0x65f1,0x0222,0x0105,0x00ff,0x0000,0x0000,0x0000,0x0000,0x0000,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0x0037,0x6aaa,0x5003,0x9a66,0x0001,0x81c4,0x016a,
+0x02ff,0x84ff,0x15a3,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
+0x0000,0x0000,0x0000,0x2d2c,0x0000,0x0000,0x0000,0x0000,0xe028,0xa492,0x1c00,
+0x000e,0xb8ca,0x0013,0x0000,0x0000,0x6b4b,0xc059,0x1571,0x0000,0x0000,0x0000,
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
+0x2370,0x00a5,0x9618,0x419a,0x68a2,0xda35,0x001c,0x0007,0xb0ff,0x01b5,0x0000,
+0x0000,0xff70,0x19ff,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
+0x0000,0x0000,0x0000,0x0000,0x0000,0x3170,0x00a5,0x9618,0x419a,0x68a2,0xda35,
+0x001c,0x000e,0xb0ff,0x21b5,0x0000,0x2fd8,0xff70,0x1226,0x19ff,0x07fa,0x6201,
+0x032e,0x0587,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x1112,
+0x1441,0x4231,0x3234,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
+0x0000,0x0000,0x0000,0x0000,0x8000,0x0000,0x0000,0x0000,0x0000,0x8000,0x0000,
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x4d31,0x7f54,0x3c93,0x1205,0x1931,
+0x492d,0x7f50,0x3c93,0x0e01,0x192d,0x0070,0x0000,0x8180,0x724d,0xab59,0x3a08,
+0xdd79,0x2559,0x0070,0x0000,0x81a0,0x6e4d,0x2b99,0x3a09,0x9989,0x2157,0x0000,
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
+0x0000,0x0000,0x0000,0x0000,0x7092,0x4924,0xb892,0x4924,0x7092,0x289e,0x8992,
+0x289e,0xa292,0x289e,0x70a2,0xa7ac,0x0000,0x0000,0x2462,0x5e13,0x0000,0x0000,
+0x70a2,0xa7ac,0x0000,0x0000,0x1e5c,0x5713,0x0000,0x0000,0x8989,0x0000,0x0000,
+0x0000,0x2424,0x0000,0x0000,0x0000,0x7075,0xa2ac,0xb800,0x0000,0x2868,0x2828,
+0x2800,0x0000,0x7075,0xa2ac,0x0000,0x0000,0x2868,0x2828,0x0000,0x0000,0x7075,
+0xac00,0x0000,0x0000,0x2161,0x2100,0x0000,0x0000,0x7075,0xac00,0x0000,0x0000,
+0x1b5b,0x1b00,0x0000,0x0000,0x8989,0x0000,0x0000,0x0000,0x2121,0x0000,0x0000,
+0x0000,0x0000,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
+0xffff,0xffff};
+
+#endif
diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-netgear.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-netgear.c
new file mode 100644
index 0000000000..f30478c0fd
--- /dev/null
+++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-netgear.c
@@ -0,0 +1,88 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/phy.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <lantiq_soc.h>
+#include <irq.h>
+
+#include "../machtypes.h"
+#include "devices.h"
+#include "dev-dwc_otg.h"
+
+static struct ltq_pci_data ltq_pci_data = {
+	.clock	= PCI_CLOCK_INT,
+	.gpio	= PCI_GNT1 | PCI_REQ1,
+	.irq	= {
+		[14] = INT_NUM_IM0_IRL0 + 22,
+	},
+};
+
+static struct ltq_eth_data ltq_eth_data = {
+	.mii_mode = PHY_INTERFACE_MODE_MII,
+};
+
+static struct mtd_partition easy98000_nor_partitions[] =
+{
+	{
+		.name	= "uboot",
+		.offset	= 0x0,
+		.size	= 0x40000,
+	},
+	{
+		.name	= "uboot_env",
+		.offset	= 0x40000,
+		.size	= 0x40000,	/* 2 sectors for redundant env. */
+	},
+	{
+		.name	= "linux",
+		.offset	= 0x80000,
+		.size	= 0xF80000,	/* map only 16 MiB */
+	},
+};
+
+static struct flash_platform_data easy98000_spi_flash_platform_data = {
+	.name = "sflash",
+	.parts = easy98000_nor_partitions,
+	.nr_parts = ARRAY_SIZE(easy98000_nor_partitions)
+};
+
+static struct spi_board_info spi_info __initdata = {
+	.modalias		= "m25p80",
+	.bus_num		= 0,
+	.chip_select		= 3,
+	.max_speed_hz		= 10 * 1000 * 1000,
+	.mode			= SPI_MODE_3,
+	.platform_data		= &easy98000_spi_flash_platform_data
+};
+
+struct ltq_spi_platform_data ltq_spi_data = {
+	.num_chipselect = 4,
+};
+
+static void __init dgn3500_init(void)
+{
+	ltq_register_pci(&ltq_pci_data);
+	ltq_register_etop(&ltq_eth_data);
+	ltq_register_spi(&ltq_spi_data, &spi_info, 1);
+	/* The usb power is always enabled, protected by a fuse */
+	xway_register_dwc(-1);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_DGN3500B,
+	     "DGN3500B",
+	     "Netgear DGN3500B",
+	      dgn3500_init);
diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-p2601hnf1.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-p2601hnf1.c
new file mode 100644
index 0000000000..98c118135e
--- /dev/null
+++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-p2601hnf1.c
@@ -0,0 +1,106 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/gpio_buttons.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/etherdevice.h>
+#include <linux/mdio-gpio.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+
+#include <lantiq_soc.h>
+#include <lantiq_platform.h>
+
+#include "../machtypes.h"
+#include "devices.h"
+#include "../dev-gpio-leds.h"
+#include "dev-dwc_otg.h"
+
+
+static struct mtd_partition p2601hnf1_partitions[] __initdata =
+{
+	{
+		.name	= "uboot",
+		.offset	= 0x0,
+		.size	= 0x20000,
+	},
+/*	{
+		.name	= "uboot_env",
+		.offset	= 0x20000,
+		.size	= 0x20000,
+	},
+*/	{
+		.name	= "linux",
+		.offset	= 0x020000,
+		.size	= 0xfc0000,
+	},
+	{
+		.name	= "board_config",
+		.offset	= 0xfe0000,
+		.size	= 0x20000,
+	},
+};
+
+static struct physmap_flash_data p2601hnf1_flash_data __initdata = {
+	.nr_parts	= ARRAY_SIZE(p2601hnf1_partitions),
+	.parts		= p2601hnf1_partitions,
+};
+
+static struct gpio_led p2601hnf1_leds_gpio[] __initdata = {
+	{ .name = "soc:red:power", .gpio = 29, .active_low = 1, .default_trigger = "default-off" },
+	{ .name = "soc:yellow:phone", .gpio = 64, .active_low = 1, .default_trigger = "default-off" },
+	{ .name = "soc:green:phone", .gpio = 65, .active_low = 1, .default_trigger = "default-off" },
+	{ .name = "soc:yellow:wlan", .gpio = 66, .active_low = 1, .default_trigger = "default-off" },
+	{ .name = "soc:green:power", .gpio = 67, .active_low = 1, .default_trigger = "default-on" },
+	{ .name = "soc:red:internet", .gpio = 68, .active_low = 1, .default_trigger = "default-off" },
+	{ .name = "soc:green:internet", .gpio = 69, .active_low = 1, .default_trigger = "default-off" },
+	{ .name = "soc:green:dsl", .gpio = 70, .active_low = 1, .default_trigger = "default-off" },
+	{ .name = "soc:green:wlan", .gpio = 71, .active_low = 1, .default_trigger = "default-off" },
+};
+
+static struct gpio_button
+p2601hnf1_gpio_buttons[] /*__initdata*/ = {
+	{ .desc = "reset", .type = EV_KEY, .code = BTN_0, .threshold = 3, .gpio = 53, .active_low = 1, },
+	{ .desc = "wlan", .type = EV_KEY, .code = BTN_1, .threshold = 1, .gpio = 54, .active_low = 1, },
+};
+
+static struct ltq_eth_data ltq_eth_data = {
+	.mii_mode	= PHY_INTERFACE_MODE_RMII,
+};
+
+static void __init
+p2601hnf1_init(void)
+{
+
+#define P2601HNF1_USB			9
+
+	ltq_register_gpio_stp();
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(p2601hnf1_leds_gpio), p2601hnf1_leds_gpio);
+	ltq_register_gpio_buttons(p2601hnf1_gpio_buttons, ARRAY_SIZE(p2601hnf1_gpio_buttons));
+	ltq_register_nor(&p2601hnf1_flash_data);
+	ltq_register_etop(&ltq_eth_data);
+	xway_register_dwc(P2601HNF1_USB);
+
+	// enable the ethernet ports on the SoC
+//	ltq_w32((ltq_r32(LTQ_GPORT_P0_CTL) & ~(1 << 17)) | (1 << 18), LTQ_GPORT_P0_CTL);
+//	ltq_w32((ltq_r32(LTQ_GPORT_P1_CTL) & ~(1 << 17)) | (1 << 18), LTQ_GPORT_P1_CTL);
+//	ltq_w32((ltq_r32(LTQ_GPORT_P2_CTL) & ~(1 << 17)) | (1 << 18), LTQ_GPORT_P2_CTL);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_P2601HNF1,
+			"P2601HNF1",
+			"ZyXEL P-2601HN-F1",
+			p2601hnf1_init);
+
diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-wbmr.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-wbmr.c
new file mode 100644
index 0000000000..b11c2631bb
--- /dev/null
+++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-wbmr.c
@@ -0,0 +1,120 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/gpio_buttons.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+
+#include <lantiq_soc.h>
+#include <irq.h>
+#include <dev-gpio-leds.h>
+#include <dev-gpio-buttons.h>
+
+#include "../machtypes.h"
+#include "devices.h"
+#include "dev-dwc_otg.h"
+
+static struct mtd_partition wbmr_partitions[] =
+{
+	{
+		.name	= "uboot",
+		.offset	= 0x0,
+		.size	= 0x40000,
+	},
+	{
+		.name	= "uboot-env",
+		.offset	= 0x40000,
+		.size	= 0x20000,
+	},
+	{
+		.name	= "linux",
+		.offset	= 0x60000,
+		.size	= 0x1f20000,
+	},
+	{
+		.name	= "calibration",
+		.offset	= 0x1fe0000,
+		.size	= 0x20000,
+	},
+};
+
+static struct physmap_flash_data wbmr_flash_data = {
+	.nr_parts	= ARRAY_SIZE(wbmr_partitions),
+	.parts		= wbmr_partitions,
+};
+
+static struct gpio_led
+wbmr_gpio_leds[] __initdata = {
+	{ .name = "soc:blue:movie", .gpio = 20, .active_low = 1, },
+	{ .name = "soc:red:internet", .gpio = 18, .active_low = 1, },
+	{ .name = "soc:green:internet", .gpio = 17, .active_low = 1, },
+	{ .name = "soc:green:adsl", .gpio = 16, .active_low = 1, },
+	{ .name = "soc:green:wlan", .gpio = 15, .active_low = 1, },
+	{ .name = "soc:red:security", .gpio = 14, .active_low = 1, },
+	{ .name = "soc:green:power", .gpio = 1, .active_low = 1, },
+	{ .name = "soc:red:power", .gpio = 5, .active_low = 1, },
+	{ .name = "soc:green:usb", .gpio = 28, .active_low = 1, },
+};
+
+static struct gpio_keys_button
+wbmr_gpio_keys[] __initdata = {
+	{
+		.desc = "aoss",
+		.type = EV_KEY,
+		.code = BTN_0,
+		.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+		.gpio = 0,
+		.active_low = 1,
+	},
+	{
+		.desc = "reset",
+		.type = EV_KEY,
+		.code = BTN_1,
+		.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+		.gpio = 37,
+		.active_low = 1,
+	},
+};
+
+static struct ltq_pci_data ltq_pci_data = {
+	.clock      = PCI_CLOCK_INT,
+	.gpio   = PCI_GNT1 | PCI_REQ1,
+	.irq    = {
+		[14] = INT_NUM_IM0_IRL0 + 22,
+	},
+};
+
+static struct ltq_eth_data ltq_eth_data = {
+	.mii_mode = PHY_INTERFACE_MODE_RGMII,
+};
+
+static void __init
+wbmr_init(void)
+{
+#define WMBR_BRN_MAC			0x1fd0024
+
+	ltq_add_device_gpio_leds(-1, ARRAY_SIZE(wbmr_gpio_leds), wbmr_gpio_leds);
+	ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(wbmr_gpio_keys), wbmr_gpio_keys);
+	ltq_register_nor(&wbmr_flash_data);
+	ltq_register_pci(&ltq_pci_data);
+	memcpy_fromio(&ltq_eth_data.mac.sa_data,
+		(void *)KSEG1ADDR(LTQ_FLASH_START + WMBR_BRN_MAC), 6);
+	ltq_register_etop(&ltq_eth_data);
+	xway_register_dwc(36);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_WBMR,
+			"WBMR",
+			"WBMR",
+			wbmr_init);
diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/pci-ath-fixup.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/pci-ath-fixup.c
new file mode 100644
index 0000000000..c87ffb2091
--- /dev/null
+++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/pci-ath-fixup.c
@@ -0,0 +1,109 @@
+/*
+ *  Atheros AP94 reference board PCI initialization
+ *
+ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <lantiq_soc.h>
+
+#define LTQ_PCI_MEM_BASE		0x18000000
+
+struct ath_fixup {
+	u16		*cal_data;
+	unsigned	slot;
+};
+
+static int ath_num_fixups;
+static struct ath_fixup ath_fixups[2];
+
+static void ath_pci_fixup(struct pci_dev *dev)
+{
+	void __iomem *mem;
+	u16 *cal_data = NULL;
+	u16 cmd;
+	u32 bar0;
+	u32 val;
+	unsigned i;
+
+	for (i = 0; i < ath_num_fixups; i++) {
+		if (ath_fixups[i].cal_data == NULL)
+			continue;
+
+		if (ath_fixups[i].slot != PCI_SLOT(dev->devfn))
+			continue;
+
+		cal_data = ath_fixups[i].cal_data;
+		break;
+	}
+
+	if (cal_data == NULL)
+		return;
+
+	if (*cal_data != 0xa55a) {
+		pr_err("pci %s: invalid calibration data\n", pci_name(dev));
+		return;
+	}
+
+	pr_info("pci %s: fixup device configuration\n", pci_name(dev));
+
+	mem = ioremap(LTQ_PCI_MEM_BASE, 0x10000);
+	if (!mem) {
+		pr_err("pci %s: ioremap error\n", pci_name(dev));
+		return;
+	}
+
+	pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, LTQ_PCI_MEM_BASE);
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+	pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+	/* set pointer to first reg address */
+	cal_data += 3;
+	while (*cal_data != 0xffff) {
+		u32 reg;
+		reg = *cal_data++;
+		val = *cal_data++;
+		val |= (*cal_data++) << 16;
+
+		ltq_w32(swab32(val), mem + reg);
+		udelay(100);
+	}
+
+	pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
+	dev->vendor = val & 0xffff;
+	dev->device = (val >> 16) & 0xffff;
+
+	pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
+	dev->revision = val & 0xff;
+	dev->class = val >> 8; /* upper 3 bytes */
+
+	pr_info("pci %s: fixup info: [%04x:%04x] revision %02x class %#08x\n", 
+		pci_name(dev), dev->vendor, dev->device, dev->revision, dev->class);
+
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+	pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
+
+	iounmap(mem);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath_pci_fixup);
+
+void __init ltq_pci_ath_fixup(unsigned slot, u16 *cal_data)
+{
+	if (ath_num_fixups >= ARRAY_SIZE(ath_fixups))
+		return;
+
+	ath_fixups[ath_num_fixups].slot = slot;
+	ath_fixups[ath_num_fixups].cal_data = cal_data;
+	ath_num_fixups++;
+}
diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/pci-ath-fixup.h b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/pci-ath-fixup.h
new file mode 100644
index 0000000000..095d2619ce
--- /dev/null
+++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/pci-ath-fixup.h
@@ -0,0 +1,6 @@
+#ifndef _PCI_ATH_FIXUP
+#define _PCI_ATH_FIXUP
+
+void ltq_pci_ath_fixup(unsigned slot, u16 *cal_data) __init;
+
+#endif /* _PCI_ATH_FIXUP */
diff --git a/target/linux/lantiq/patches-3.3/0001-MTD-add-m25p80-id-for-mx25l2005a.patch b/target/linux/lantiq/patches-3.3/0001-MTD-add-m25p80-id-for-mx25l2005a.patch
new file mode 100644
index 0000000000..fdbaf74d08
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0001-MTD-add-m25p80-id-for-mx25l2005a.patch
@@ -0,0 +1,24 @@
+From 1e54b748744aa6a6dbb86cdbdb9ea775609da7e1 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 13 Mar 2012 18:03:33 +0100
+Subject: [PATCH 01/70] MTD: add m25p80 id for mx25l2005a
+
+---
+ drivers/mtd/devices/m25p80.c |    1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
+index 7c60ddd..64b3b99 100644
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -676,6 +676,7 @@ static const struct spi_device_id m25p_ids[] = {
+ 	{ "640s33b",  INFO(0x898913, 0, 64 * 1024, 128, 0) },
+ 
+ 	/* Macronix */
++	{ "mx25l2005a",  INFO(0xc22012, 0, 64 * 1024,   8, SECT_4K) },
+ 	{ "mx25l4005a",  INFO(0xc22013, 0, 64 * 1024,   8, SECT_4K) },
+ 	{ "mx25l8005",   INFO(0xc22014, 0, 64 * 1024,  16, 0) },
+ 	{ "mx25l1606e",  INFO(0xc22015, 0, 64 * 1024,  32, SECT_4K) },
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0002-MIPS-lantiq-reorganize-xway-code.patch b/target/linux/lantiq/patches-3.3/0002-MIPS-lantiq-reorganize-xway-code.patch
new file mode 100644
index 0000000000..ded2ca4e85
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0002-MIPS-lantiq-reorganize-xway-code.patch
@@ -0,0 +1,881 @@
+From ebbdb83f27aad0eec162c24f32d8dd852e460584 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 10 Aug 2011 14:57:04 +0200
+Subject: [PATCH 02/70] MIPS: lantiq: reorganize xway code
+
+Inside the folder arch/mips/lantiq/xway, there were alot of small files with
+lots of duplicated code. This patch adds a wrapper function for inserting and
+requesting resources and unifies the small files into one bigger file.
+
+This patch makes the xway code consistent with the falcon support added later
+in this series.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/include/asm/mach-lantiq/lantiq.h         |   14 +---
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h |   14 ++++
+ arch/mips/lantiq/clk.c                             |   25 +------
+ arch/mips/lantiq/devices.c                         |   30 ++------
+ arch/mips/lantiq/devices.h                         |    4 +
+ arch/mips/lantiq/prom.c                            |   51 +++++++++++--
+ arch/mips/lantiq/prom.h                            |    4 +
+ arch/mips/lantiq/xway/Makefile                     |    6 +-
+ arch/mips/lantiq/xway/devices.c                    |   42 ++---------
+ arch/mips/lantiq/xway/dma.c                        |   21 +----
+ arch/mips/lantiq/xway/ebu.c                        |   52 -------------
+ arch/mips/lantiq/xway/pmu.c                        |   69 -----------------
+ arch/mips/lantiq/xway/prom-ase.c                   |    9 ++
+ arch/mips/lantiq/xway/prom-xway.c                  |   10 +++
+ arch/mips/lantiq/xway/reset.c                      |   21 +----
+ arch/mips/lantiq/xway/setup-ase.c                  |   19 -----
+ arch/mips/lantiq/xway/setup-xway.c                 |   20 -----
+ arch/mips/lantiq/xway/sysctrl.c                    |   78 ++++++++++++++++++++
+ drivers/watchdog/lantiq_wdt.c                      |    2 +-
+ 19 files changed, 199 insertions(+), 292 deletions(-)
+ delete mode 100644 arch/mips/lantiq/xway/ebu.c
+ delete mode 100644 arch/mips/lantiq/xway/pmu.c
+ delete mode 100644 arch/mips/lantiq/xway/setup-ase.c
+ delete mode 100644 arch/mips/lantiq/xway/setup-xway.c
+ create mode 100644 arch/mips/lantiq/xway/sysctrl.c
+
+diff --git a/arch/mips/include/asm/mach-lantiq/lantiq.h b/arch/mips/include/asm/mach-lantiq/lantiq.h
+index ce2f029..66d7300 100644
+--- a/arch/mips/include/asm/mach-lantiq/lantiq.h
++++ b/arch/mips/include/asm/mach-lantiq/lantiq.h
+@@ -9,6 +9,7 @@
+ #define _LANTIQ_H__
+ 
+ #include <linux/irq.h>
++#include <linux/ioport.h>
+ 
+ /* generic reg access functions */
+ #define ltq_r32(reg)		__raw_readl(reg)
+@@ -18,15 +19,6 @@
+ #define ltq_r8(reg)		__raw_readb(reg)
+ #define ltq_w8(val, reg)	__raw_writeb(val, reg)
+ 
+-/* register access macros for EBU and CGU */
+-#define ltq_ebu_w32(x, y)	ltq_w32((x), ltq_ebu_membase + (y))
+-#define ltq_ebu_r32(x)		ltq_r32(ltq_ebu_membase + (x))
+-#define ltq_cgu_w32(x, y)	ltq_w32((x), ltq_cgu_membase + (y))
+-#define ltq_cgu_r32(x)		ltq_r32(ltq_cgu_membase + (x))
+-
+-extern __iomem void *ltq_ebu_membase;
+-extern __iomem void *ltq_cgu_membase;
+-
+ extern unsigned int ltq_get_cpu_ver(void);
+ extern unsigned int ltq_get_soc_type(void);
+ 
+@@ -51,7 +43,9 @@ extern void ltq_enable_irq(struct irq_data *data);
+ 
+ /* find out what caused the last cpu reset */
+ extern int ltq_reset_cause(void);
+-#define LTQ_RST_CAUSE_WDTRST	0x20
++
++/* helper for requesting and remapping resources */
++extern void __iomem *ltq_remap_resource(struct resource *res);
+ 
+ #define IOPORT_RESOURCE_START	0x10000000
+ #define IOPORT_RESOURCE_END	0xffffffff
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index 8a3c6be..9b7ee366 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -61,6 +61,8 @@
+ #define LTQ_CGU_BASE_ADDR	0x1F103000
+ #define LTQ_CGU_SIZE		0x1000
+ 
++#define CGU_EPHY		0x10
++
+ /* ICU - interrupt control unit */
+ #define LTQ_ICU_BASE_ADDR	0x1F880200
+ #define LTQ_ICU_SIZE		0x100
+@@ -97,6 +99,8 @@
+ #define LTQ_WDT_BASE_ADDR	0x1F8803F0
+ #define LTQ_WDT_SIZE		0x10
+ 
++#define LTQ_RST_CAUSE_WDTRST	0x20
++
+ /* STP - serial to parallel conversion unit */
+ #define LTQ_STP_BASE_ADDR	0x1E100BB0
+ #define LTQ_STP_SIZE		0x40
+@@ -121,11 +125,21 @@
+ #define LTQ_MPS_BASE_ADDR	(KSEG1 + 0x1F107000)
+ #define LTQ_MPS_CHIPID		((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344))
+ 
++/* register access macros for EBU and CGU */
++#define ltq_ebu_w32(x, y)	ltq_w32((x), ltq_ebu_membase + (y))
++#define ltq_ebu_r32(x)		ltq_r32(ltq_ebu_membase + (x))
++#define ltq_cgu_w32(x, y)	ltq_w32((x), ltq_cgu_membase + (y))
++#define ltq_cgu_r32(x)		ltq_r32(ltq_cgu_membase + (x))
++
++extern __iomem void *ltq_ebu_membase;
++extern __iomem void *ltq_cgu_membase;
++
+ /* request a non-gpio and set the PIO config */
+ extern int  ltq_gpio_request(unsigned int pin, unsigned int alt0,
+ 	unsigned int alt1, unsigned int dir, const char *name);
+ extern void ltq_pmu_enable(unsigned int module);
+ extern void ltq_pmu_disable(unsigned int module);
++extern void ltq_cgu_enable(unsigned int clk);
+ 
+ static inline int ltq_is_ar9(void)
+ {
+diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c
+index 412814f..39eef7f 100644
+--- a/arch/mips/lantiq/clk.c
++++ b/arch/mips/lantiq/clk.c
+@@ -22,6 +22,7 @@
+ #include <lantiq_soc.h>
+ 
+ #include "clk.h"
++#include "prom.h"
+ 
+ struct clk {
+ 	const char *name;
+@@ -46,16 +47,6 @@ static struct clk cpu_clk_generic[] = {
+ 	},
+ };
+ 
+-static struct resource ltq_cgu_resource = {
+-	.name	= "cgu",
+-	.start	= LTQ_CGU_BASE_ADDR,
+-	.end	= LTQ_CGU_BASE_ADDR + LTQ_CGU_SIZE - 1,
+-	.flags	= IORESOURCE_MEM,
+-};
+-
+-/* remapped clock register range */
+-void __iomem *ltq_cgu_membase;
+-
+ void clk_init(void)
+ {
+ 	cpu_clk = cpu_clk_generic;
+@@ -133,21 +124,11 @@ void __init plat_time_init(void)
+ {
+ 	struct clk *clk;
+ 
+-	if (insert_resource(&iomem_resource, &ltq_cgu_resource) < 0)
+-		panic("Failed to insert cgu memory");
+-
+-	if (request_mem_region(ltq_cgu_resource.start,
+-			resource_size(&ltq_cgu_resource), "cgu") < 0)
+-		panic("Failed to request cgu memory");
++	ltq_soc_init();
+ 
+-	ltq_cgu_membase = ioremap_nocache(ltq_cgu_resource.start,
+-				resource_size(&ltq_cgu_resource));
+-	if (!ltq_cgu_membase) {
+-		pr_err("Failed to remap cgu memory\n");
+-		unreachable();
+-	}
+ 	clk = clk_get(0, "cpu");
+ 	mips_hpt_frequency = clk_get_rate(clk) / ltq_get_counter_resolution();
+ 	write_c0_compare(read_c0_count());
++	pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000);
+ 	clk_put(clk);
+ }
+diff --git a/arch/mips/lantiq/devices.c b/arch/mips/lantiq/devices.c
+index de1cb2b..7193d78 100644
+--- a/arch/mips/lantiq/devices.c
++++ b/arch/mips/lantiq/devices.c
+@@ -27,12 +27,8 @@
+ #include "devices.h"
+ 
+ /* nor flash */
+-static struct resource ltq_nor_resource = {
+-	.name	= "nor",
+-	.start	= LTQ_FLASH_START,
+-	.end	= LTQ_FLASH_START + LTQ_FLASH_MAX - 1,
+-	.flags  = IORESOURCE_MEM,
+-};
++static struct resource ltq_nor_resource =
++	MEM_RES("nor", LTQ_FLASH_START, LTQ_FLASH_MAX);
+ 
+ static struct platform_device ltq_nor = {
+ 	.name		= "ltq_nor",
+@@ -47,12 +43,8 @@ void __init ltq_register_nor(struct physmap_flash_data *data)
+ }
+ 
+ /* watchdog */
+-static struct resource ltq_wdt_resource = {
+-	.name	= "watchdog",
+-	.start  = LTQ_WDT_BASE_ADDR,
+-	.end    = LTQ_WDT_BASE_ADDR + LTQ_WDT_SIZE - 1,
+-	.flags  = IORESOURCE_MEM,
+-};
++static struct resource ltq_wdt_resource =
++	MEM_RES("watchdog", LTQ_WDT_BASE_ADDR, LTQ_WDT_SIZE);
+ 
+ void __init ltq_register_wdt(void)
+ {
+@@ -61,24 +53,14 @@ void __init ltq_register_wdt(void)
+ 
+ /* asc ports */
+ static struct resource ltq_asc0_resources[] = {
+-	{
+-		.name	= "asc0",
+-		.start  = LTQ_ASC0_BASE_ADDR,
+-		.end    = LTQ_ASC0_BASE_ADDR + LTQ_ASC_SIZE - 1,
+-		.flags  = IORESOURCE_MEM,
+-	},
++	MEM_RES("asc0", LTQ_ASC0_BASE_ADDR, LTQ_ASC_SIZE),
+ 	IRQ_RES(tx, LTQ_ASC_TIR(0)),
+ 	IRQ_RES(rx, LTQ_ASC_RIR(0)),
+ 	IRQ_RES(err, LTQ_ASC_EIR(0)),
+ };
+ 
+ static struct resource ltq_asc1_resources[] = {
+-	{
+-		.name	= "asc1",
+-		.start  = LTQ_ASC1_BASE_ADDR,
+-		.end    = LTQ_ASC1_BASE_ADDR + LTQ_ASC_SIZE - 1,
+-		.flags  = IORESOURCE_MEM,
+-	},
++	MEM_RES("asc1", LTQ_ASC1_BASE_ADDR, LTQ_ASC_SIZE),
+ 	IRQ_RES(tx, LTQ_ASC_TIR(1)),
+ 	IRQ_RES(rx, LTQ_ASC_RIR(1)),
+ 	IRQ_RES(err, LTQ_ASC_EIR(1)),
+diff --git a/arch/mips/lantiq/devices.h b/arch/mips/lantiq/devices.h
+index 2947bb1..a03c23f 100644
+--- a/arch/mips/lantiq/devices.h
++++ b/arch/mips/lantiq/devices.h
+@@ -14,6 +14,10 @@
+ 
+ #define IRQ_RES(resname, irq) \
+ 	{.name = #resname, .start = (irq), .flags = IORESOURCE_IRQ}
++#define MEM_RES(resname, adr_start, adr_size) \
++	{ .name = resname, .flags = IORESOURCE_MEM, \
++	  .start = ((adr_start) & ~KSEG1), \
++	  .end = ((adr_start + adr_size - 1) & ~KSEG1) }
+ 
+ extern void ltq_register_nor(struct physmap_flash_data *data);
+ extern void ltq_register_wdt(void);
+diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
+index e34fcfd..e3b1e25 100644
+--- a/arch/mips/lantiq/prom.c
++++ b/arch/mips/lantiq/prom.c
+@@ -16,6 +16,10 @@
+ #include "prom.h"
+ #include "clk.h"
+ 
++/* access to the ebu needs to be locked between different drivers */
++DEFINE_SPINLOCK(ebu_lock);
++EXPORT_SYMBOL_GPL(ebu_lock);
++
+ static struct ltq_soc_info soc_info;
+ 
+ unsigned int ltq_get_cpu_ver(void)
+@@ -55,16 +59,51 @@ static void __init prom_init_cmdline(void)
+ 	}
+ }
+ 
+-void __init prom_init(void)
++void __iomem *ltq_remap_resource(struct resource *res)
+ {
+-	struct clk *clk;
++	__iomem void *ret = NULL;
++	struct resource *lookup = lookup_resource(&iomem_resource, res->start);
++
++	if (lookup && strcmp(lookup->name, res->name)) {
++		pr_err("conflicting memory range %s\n", res->name);
++		return NULL;
++	}
++	if (!lookup) {
++		if (insert_resource(&iomem_resource, res) < 0) {
++			pr_err("Failed to insert %s memory\n", res->name);
++			return NULL;
++		}
++	}
++	if (request_mem_region(res->start,
++			resource_size(res), res->name) < 0) {
++		pr_err("Failed to request %s memory\n", res->name);
++		goto err_res;
++	}
+ 
++	ret = ioremap_nocache(res->start, resource_size(res));
++	if (!ret)
++		goto err_mem;
++
++	pr_debug("remap: 0x%08X-0x%08X : \"%s\"\n",
++		res->start, res->end, res->name);
++	return ret;
++
++err_mem:
++	panic("Failed to remap %s memory\n", res->name);
++	release_mem_region(res->start, resource_size(res));
++
++err_res:
++	release_resource(res);
++	return NULL;
++}
++EXPORT_SYMBOL(ltq_remap_resource);
++
++void __init prom_init(void)
++{
+ 	ltq_soc_detect(&soc_info);
+ 	clk_init();
+-	clk = clk_get(0, "cpu");
+-	snprintf(soc_info.sys_type, LTQ_SYS_TYPE_LEN - 1, "%s rev1.%d",
+-		soc_info.name, soc_info.rev);
+-	clk_put(clk);
++	snprintf(soc_info.sys_type, LTQ_SYS_TYPE_LEN - 1, "%s rev %s",
++		soc_info.name, soc_info.rev_type);
+ 	soc_info.sys_type[LTQ_SYS_TYPE_LEN - 1] = '\0';
+ 	pr_info("SoC: %s\n", soc_info.sys_type);
+ 	prom_init_cmdline();
+diff --git a/arch/mips/lantiq/prom.h b/arch/mips/lantiq/prom.h
+index b4229d9..51dba1b 100644
+--- a/arch/mips/lantiq/prom.h
++++ b/arch/mips/lantiq/prom.h
+@@ -9,17 +9,21 @@
+ #ifndef _LTQ_PROM_H__
+ #define _LTQ_PROM_H__
+ 
++#define LTQ_SYS_REV_LEN		0x10
+ #define LTQ_SYS_TYPE_LEN	0x100
+ 
+ struct ltq_soc_info {
+ 	unsigned char *name;
+ 	unsigned int rev;
++	unsigned char rev_type[LTQ_SYS_REV_LEN];
++	unsigned int srev;
+ 	unsigned int partnum;
+ 	unsigned int type;
+ 	unsigned char sys_type[LTQ_SYS_TYPE_LEN];
+ };
+ 
+ extern void ltq_soc_detect(struct ltq_soc_info *i);
++extern void ltq_soc_init(void);
+ extern void ltq_soc_setup(void);
+ 
+ #endif
+diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
+index c517f2e..6678402 100644
+--- a/arch/mips/lantiq/xway/Makefile
++++ b/arch/mips/lantiq/xway/Makefile
+@@ -1,7 +1,7 @@
+-obj-y := pmu.o ebu.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o
++obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o
+ 
+-obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o setup-xway.o
+-obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o setup-ase.o
++obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o
++obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o
+ 
+ obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
+ obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
+diff --git a/arch/mips/lantiq/xway/devices.c b/arch/mips/lantiq/xway/devices.c
+index d614aa7..f97e565 100644
+--- a/arch/mips/lantiq/xway/devices.c
++++ b/arch/mips/lantiq/xway/devices.c
+@@ -31,22 +31,9 @@
+ 
+ /* gpio */
+ static struct resource ltq_gpio_resource[] = {
+-	{
+-		.name	= "gpio0",
+-		.start  = LTQ_GPIO0_BASE_ADDR,
+-		.end    = LTQ_GPIO0_BASE_ADDR + LTQ_GPIO_SIZE - 1,
+-		.flags  = IORESOURCE_MEM,
+-	}, {
+-		.name	= "gpio1",
+-		.start  = LTQ_GPIO1_BASE_ADDR,
+-		.end    = LTQ_GPIO1_BASE_ADDR + LTQ_GPIO_SIZE - 1,
+-		.flags  = IORESOURCE_MEM,
+-	}, {
+-		.name	= "gpio2",
+-		.start  = LTQ_GPIO2_BASE_ADDR,
+-		.end    = LTQ_GPIO2_BASE_ADDR + LTQ_GPIO_SIZE - 1,
+-		.flags  = IORESOURCE_MEM,
+-	}
++	MEM_RES("gpio0", LTQ_GPIO0_BASE_ADDR, LTQ_GPIO_SIZE),
++	MEM_RES("gpio1", LTQ_GPIO1_BASE_ADDR, LTQ_GPIO_SIZE),
++	MEM_RES("gpio2", LTQ_GPIO2_BASE_ADDR, LTQ_GPIO_SIZE),
+ };
+ 
+ void __init ltq_register_gpio(void)
+@@ -64,12 +51,8 @@ void __init ltq_register_gpio(void)
+ }
+ 
+ /* serial to parallel conversion */
+-static struct resource ltq_stp_resource = {
+-	.name   = "stp",
+-	.start  = LTQ_STP_BASE_ADDR,
+-	.end    = LTQ_STP_BASE_ADDR + LTQ_STP_SIZE - 1,
+-	.flags  = IORESOURCE_MEM,
+-};
++static struct resource ltq_stp_resource =
++	MEM_RES("stp", LTQ_STP_BASE_ADDR, LTQ_STP_SIZE);
+ 
+ void __init ltq_register_gpio_stp(void)
+ {
+@@ -78,12 +61,7 @@ void __init ltq_register_gpio_stp(void)
+ 
+ /* asc ports - amazon se has its own serial mapping */
+ static struct resource ltq_ase_asc_resources[] = {
+-	{
+-		.name	= "asc0",
+-		.start  = LTQ_ASC1_BASE_ADDR,
+-		.end    = LTQ_ASC1_BASE_ADDR + LTQ_ASC_SIZE - 1,
+-		.flags  = IORESOURCE_MEM,
+-	},
++	MEM_RES("asc0", LTQ_ASC1_BASE_ADDR, LTQ_ASC_SIZE),
+ 	IRQ_RES(tx, LTQ_ASC_ASE_TIR),
+ 	IRQ_RES(rx, LTQ_ASC_ASE_RIR),
+ 	IRQ_RES(err, LTQ_ASC_ASE_EIR),
+@@ -96,12 +74,8 @@ void __init ltq_register_ase_asc(void)
+ }
+ 
+ /* ethernet */
+-static struct resource ltq_etop_resources = {
+-	.name	= "etop",
+-	.start	= LTQ_ETOP_BASE_ADDR,
+-	.end	= LTQ_ETOP_BASE_ADDR + LTQ_ETOP_SIZE - 1,
+-	.flags	= IORESOURCE_MEM,
+-};
++static struct resource ltq_etop_resources =
++	MEM_RES("etop", LTQ_ETOP_BASE_ADDR, LTQ_ETOP_SIZE);
+ 
+ static struct platform_device ltq_etop = {
+ 	.name		= "ltq_etop",
+diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
+index b210e93..6cf883b 100644
+--- a/arch/mips/lantiq/xway/dma.c
++++ b/arch/mips/lantiq/xway/dma.c
+@@ -24,6 +24,8 @@
+ #include <lantiq_soc.h>
+ #include <xway_dma.h>
+ 
++#include "../devices.h"
++
+ #define LTQ_DMA_CTRL		0x10
+ #define LTQ_DMA_CPOLL		0x14
+ #define LTQ_DMA_CS		0x18
+@@ -55,12 +57,8 @@
+ #define ltq_dma_w32_mask(x, y, z)	ltq_w32_mask(x, y, \
+ 						ltq_dma_membase + (z))
+ 
+-static struct resource ltq_dma_resource = {
+-	.name	= "dma",
+-	.start	= LTQ_DMA_BASE_ADDR,
+-	.end	= LTQ_DMA_BASE_ADDR + LTQ_DMA_SIZE - 1,
+-	.flags  = IORESOURCE_MEM,
+-};
++static struct resource ltq_dma_resource =
++	MEM_RES("dma", LTQ_DMA_BASE_ADDR, LTQ_DMA_SIZE);
+ 
+ static void __iomem *ltq_dma_membase;
+ 
+@@ -220,17 +218,8 @@ ltq_dma_init(void)
+ {
+ 	int i;
+ 
+-	/* insert and request the memory region */
+-	if (insert_resource(&iomem_resource, &ltq_dma_resource) < 0)
+-		panic("Failed to insert dma memory");
+-
+-	if (request_mem_region(ltq_dma_resource.start,
+-			resource_size(&ltq_dma_resource), "dma") < 0)
+-		panic("Failed to request dma memory");
+-
+ 	/* remap dma register range */
+-	ltq_dma_membase = ioremap_nocache(ltq_dma_resource.start,
+-				resource_size(&ltq_dma_resource));
++	ltq_dma_membase = ltq_remap_resource(&ltq_dma_resource);
+ 	if (!ltq_dma_membase)
+ 		panic("Failed to remap dma memory");
+ 
+diff --git a/arch/mips/lantiq/xway/ebu.c b/arch/mips/lantiq/xway/ebu.c
+deleted file mode 100644
+index 862e3e8..0000000
+--- a/arch/mips/lantiq/xway/ebu.c
++++ /dev/null
+@@ -1,52 +0,0 @@
+-/*
+- *  This program is free software; you can redistribute it and/or modify it
+- *  under the terms of the GNU General Public License version 2 as published
+- *  by the Free Software Foundation.
+- *
+- *  EBU - the external bus unit attaches PCI, NOR and NAND
+- *
+- *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+- */
+-
+-#include <linux/kernel.h>
+-#include <linux/module.h>
+-#include <linux/ioport.h>
+-
+-#include <lantiq_soc.h>
+-
+-/* all access to the ebu must be locked */
+-DEFINE_SPINLOCK(ebu_lock);
+-EXPORT_SYMBOL_GPL(ebu_lock);
+-
+-static struct resource ltq_ebu_resource = {
+-	.name	= "ebu",
+-	.start	= LTQ_EBU_BASE_ADDR,
+-	.end	= LTQ_EBU_BASE_ADDR + LTQ_EBU_SIZE - 1,
+-	.flags	= IORESOURCE_MEM,
+-};
+-
+-/* remapped base addr of the clock unit and external bus unit */
+-void __iomem *ltq_ebu_membase;
+-
+-static int __init lantiq_ebu_init(void)
+-{
+-	/* insert and request the memory region */
+-	if (insert_resource(&iomem_resource, &ltq_ebu_resource) < 0)
+-		panic("Failed to insert ebu memory");
+-
+-	if (request_mem_region(ltq_ebu_resource.start,
+-			resource_size(&ltq_ebu_resource), "ebu") < 0)
+-		panic("Failed to request ebu memory");
+-
+-	/* remap ebu register range */
+-	ltq_ebu_membase = ioremap_nocache(ltq_ebu_resource.start,
+-				resource_size(&ltq_ebu_resource));
+-	if (!ltq_ebu_membase)
+-		panic("Failed to remap ebu memory");
+-
+-	/* make sure to unprotect the memory region where flash is located */
+-	ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0);
+-	return 0;
+-}
+-
+-postcore_initcall(lantiq_ebu_init);
+diff --git a/arch/mips/lantiq/xway/pmu.c b/arch/mips/lantiq/xway/pmu.c
+deleted file mode 100644
+index fe85361..0000000
+--- a/arch/mips/lantiq/xway/pmu.c
++++ /dev/null
+@@ -1,69 +0,0 @@
+-/*
+- *  This program is free software; you can redistribute it and/or modify it
+- *  under the terms of the GNU General Public License version 2 as published
+- *  by the Free Software Foundation.
+- *
+- *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+- */
+-
+-#include <linux/kernel.h>
+-#include <linux/module.h>
+-#include <linux/ioport.h>
+-
+-#include <lantiq_soc.h>
+-
+-/* PMU - the power management unit allows us to turn part of the core
+- * on and off
+- */
+-
+-/* the enable / disable registers */
+-#define LTQ_PMU_PWDCR	0x1C
+-#define LTQ_PMU_PWDSR	0x20
+-
+-#define ltq_pmu_w32(x, y)	ltq_w32((x), ltq_pmu_membase + (y))
+-#define ltq_pmu_r32(x)		ltq_r32(ltq_pmu_membase + (x))
+-
+-static struct resource ltq_pmu_resource = {
+-	.name	= "pmu",
+-	.start	= LTQ_PMU_BASE_ADDR,
+-	.end	= LTQ_PMU_BASE_ADDR + LTQ_PMU_SIZE - 1,
+-	.flags	= IORESOURCE_MEM,
+-};
+-
+-static void __iomem *ltq_pmu_membase;
+-
+-void ltq_pmu_enable(unsigned int module)
+-{
+-	int err = 1000000;
+-
+-	ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) & ~module, LTQ_PMU_PWDCR);
+-	do {} while (--err && (ltq_pmu_r32(LTQ_PMU_PWDSR) & module));
+-
+-	if (!err)
+-		panic("activating PMU module failed!");
+-}
+-EXPORT_SYMBOL(ltq_pmu_enable);
+-
+-void ltq_pmu_disable(unsigned int module)
+-{
+-	ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) | module, LTQ_PMU_PWDCR);
+-}
+-EXPORT_SYMBOL(ltq_pmu_disable);
+-
+-int __init ltq_pmu_init(void)
+-{
+-	if (insert_resource(&iomem_resource, &ltq_pmu_resource) < 0)
+-		panic("Failed to insert pmu memory");
+-
+-	if (request_mem_region(ltq_pmu_resource.start,
+-			resource_size(&ltq_pmu_resource), "pmu") < 0)
+-		panic("Failed to request pmu memory");
+-
+-	ltq_pmu_membase = ioremap_nocache(ltq_pmu_resource.start,
+-				resource_size(&ltq_pmu_resource));
+-	if (!ltq_pmu_membase)
+-		panic("Failed to remap pmu memory");
+-	return 0;
+-}
+-
+-core_initcall(ltq_pmu_init);
+diff --git a/arch/mips/lantiq/xway/prom-ase.c b/arch/mips/lantiq/xway/prom-ase.c
+index ae4959a..3f86a3b 100644
+--- a/arch/mips/lantiq/xway/prom-ase.c
++++ b/arch/mips/lantiq/xway/prom-ase.c
+@@ -13,6 +13,7 @@
+ 
+ #include <lantiq_soc.h>
+ 
++#include "devices.h"
+ #include "../prom.h"
+ 
+ #define SOC_AMAZON_SE	"Amazon_SE"
+@@ -26,6 +27,7 @@ void __init ltq_soc_detect(struct ltq_soc_info *i)
+ {
+ 	i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT;
+ 	i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT;
++	sprintf(i->rev_type, "1.%d", i->rev);
+ 	switch (i->partnum) {
+ 	case SOC_ID_AMAZON_SE:
+ 		i->name = SOC_AMAZON_SE;
+@@ -37,3 +39,10 @@ void __init ltq_soc_detect(struct ltq_soc_info *i)
+ 		break;
+ 	}
+ }
++
++void __init ltq_soc_setup(void)
++{
++	ltq_register_ase_asc();
++	ltq_register_gpio();
++	ltq_register_wdt();
++}
+diff --git a/arch/mips/lantiq/xway/prom-xway.c b/arch/mips/lantiq/xway/prom-xway.c
+index 2228133..d823a92 100644
+--- a/arch/mips/lantiq/xway/prom-xway.c
++++ b/arch/mips/lantiq/xway/prom-xway.c
+@@ -13,6 +13,7 @@
+ 
+ #include <lantiq_soc.h>
+ 
++#include "devices.h"
+ #include "../prom.h"
+ 
+ #define SOC_DANUBE	"Danube"
+@@ -28,6 +29,7 @@ void __init ltq_soc_detect(struct ltq_soc_info *i)
+ {
+ 	i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT;
+ 	i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT;
++	sprintf(i->rev_type, "1.%d", i->rev);
+ 	switch (i->partnum) {
+ 	case SOC_ID_DANUBE1:
+ 	case SOC_ID_DANUBE2:
+@@ -52,3 +54,11 @@ void __init ltq_soc_detect(struct ltq_soc_info *i)
+ 		break;
+ 	}
+ }
++
++void __init ltq_soc_setup(void)
++{
++	ltq_register_asc(0);
++	ltq_register_asc(1);
++	ltq_register_gpio();
++	ltq_register_wdt();
++}
+diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c
+index 8b66bd8..c705bbf 100644
+--- a/arch/mips/lantiq/xway/reset.c
++++ b/arch/mips/lantiq/xway/reset.c
+@@ -15,6 +15,8 @@
+ 
+ #include <lantiq_soc.h>
+ 
++#include "../devices.h"
++
+ #define ltq_rcu_w32(x, y)	ltq_w32((x), ltq_rcu_membase + (y))
+ #define ltq_rcu_r32(x)		ltq_r32(ltq_rcu_membase + (x))
+ 
+@@ -25,12 +27,8 @@
+ #define LTQ_RCU_RST_STAT	0x0014
+ #define LTQ_RCU_STAT_SHIFT	26
+ 
+-static struct resource ltq_rcu_resource = {
+-	.name   = "rcu",
+-	.start  = LTQ_RCU_BASE_ADDR,
+-	.end    = LTQ_RCU_BASE_ADDR + LTQ_RCU_SIZE - 1,
+-	.flags  = IORESOURCE_MEM,
+-};
++static struct resource ltq_rcu_resource =
++	MEM_RES("rcu", LTQ_RCU_BASE_ADDR, LTQ_RCU_SIZE);
+ 
+ /* remapped base addr of the reset control unit */
+ static void __iomem *ltq_rcu_membase;
+@@ -67,17 +65,8 @@ static void ltq_machine_power_off(void)
+ 
+ static int __init mips_reboot_setup(void)
+ {
+-	/* insert and request the memory region */
+-	if (insert_resource(&iomem_resource, &ltq_rcu_resource) < 0)
+-		panic("Failed to insert rcu memory");
+-
+-	if (request_mem_region(ltq_rcu_resource.start,
+-			resource_size(&ltq_rcu_resource), "rcu") < 0)
+-		panic("Failed to request rcu memory");
+-
+ 	/* remap rcu register range */
+-	ltq_rcu_membase = ioremap_nocache(ltq_rcu_resource.start,
+-				resource_size(&ltq_rcu_resource));
++	ltq_rcu_membase = ltq_remap_resource(&ltq_rcu_resource);
+ 	if (!ltq_rcu_membase)
+ 		panic("Failed to remap rcu memory");
+ 
+diff --git a/arch/mips/lantiq/xway/setup-ase.c b/arch/mips/lantiq/xway/setup-ase.c
+deleted file mode 100644
+index f6f3267..0000000
+--- a/arch/mips/lantiq/xway/setup-ase.c
++++ /dev/null
+@@ -1,19 +0,0 @@
+-/*
+- *  This program is free software; you can redistribute it and/or modify it
+- *  under the terms of the GNU General Public License version 2 as published
+- *  by the Free Software Foundation.
+- *
+- *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+- */
+-
+-#include <lantiq_soc.h>
+-
+-#include "../prom.h"
+-#include "devices.h"
+-
+-void __init ltq_soc_setup(void)
+-{
+-	ltq_register_ase_asc();
+-	ltq_register_gpio();
+-	ltq_register_wdt();
+-}
+diff --git a/arch/mips/lantiq/xway/setup-xway.c b/arch/mips/lantiq/xway/setup-xway.c
+deleted file mode 100644
+index c292f64..0000000
+--- a/arch/mips/lantiq/xway/setup-xway.c
++++ /dev/null
+@@ -1,20 +0,0 @@
+-/*
+- *  This program is free software; you can redistribute it and/or modify it
+- *  under the terms of the GNU General Public License version 2 as published
+- *  by the Free Software Foundation.
+- *
+- *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+- */
+-
+-#include <lantiq_soc.h>
+-
+-#include "../prom.h"
+-#include "devices.h"
+-
+-void __init ltq_soc_setup(void)
+-{
+-	ltq_register_asc(0);
+-	ltq_register_asc(1);
+-	ltq_register_gpio();
+-	ltq_register_wdt();
+-}
+diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
+new file mode 100644
+index 0000000..8fd13a1
+--- /dev/null
++++ b/arch/mips/lantiq/xway/sysctrl.c
+@@ -0,0 +1,78 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/ioport.h>
++#include <linux/export.h>
++
++#include <lantiq_soc.h>
++
++#include "../devices.h"
++
++/* clock control register */
++#define LTQ_CGU_IFCCR	0x0018
++
++/* the enable / disable registers */
++#define LTQ_PMU_PWDCR	0x1C
++#define LTQ_PMU_PWDSR	0x20
++
++#define ltq_pmu_w32(x, y)	ltq_w32((x), ltq_pmu_membase + (y))
++#define ltq_pmu_r32(x)		ltq_r32(ltq_pmu_membase + (x))
++
++static struct resource ltq_cgu_resource =
++	MEM_RES("cgu", LTQ_CGU_BASE_ADDR, LTQ_CGU_SIZE);
++
++static struct resource ltq_pmu_resource =
++	MEM_RES("pmu", LTQ_PMU_BASE_ADDR, LTQ_PMU_SIZE);
++
++static struct resource ltq_ebu_resource =
++	MEM_RES("ebu", LTQ_EBU_BASE_ADDR, LTQ_EBU_SIZE);
++
++void __iomem *ltq_cgu_membase;
++void __iomem *ltq_ebu_membase;
++static void __iomem *ltq_pmu_membase;
++
++void ltq_cgu_enable(unsigned int clk)
++{
++	ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | clk, LTQ_CGU_IFCCR);
++}
++
++void ltq_pmu_enable(unsigned int module)
++{
++	int err = 1000000;
++
++	ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) & ~module, LTQ_PMU_PWDCR);
++	do {} while (--err && (ltq_pmu_r32(LTQ_PMU_PWDSR) & module));
++
++	if (!err)
++		panic("activating PMU module failed!\n");
++}
++EXPORT_SYMBOL(ltq_pmu_enable);
++
++void ltq_pmu_disable(unsigned int module)
++{
++	ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) | module, LTQ_PMU_PWDCR);
++}
++EXPORT_SYMBOL(ltq_pmu_disable);
++
++void __init ltq_soc_init(void)
++{
++	ltq_pmu_membase = ltq_remap_resource(&ltq_pmu_resource);
++	if (!ltq_pmu_membase)
++		panic("Failed to remap pmu memory\n");
++
++	ltq_cgu_membase = ltq_remap_resource(&ltq_cgu_resource);
++	if (!ltq_cgu_membase)
++		panic("Failed to remap cgu memory\n");
++
++	ltq_ebu_membase = ltq_remap_resource(&ltq_ebu_resource);
++	if (!ltq_ebu_membase)
++		panic("Failed to remap ebu memory\n");
++
++	/* make sure to unprotect the memory region where flash is located */
++	ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0);
++}
+diff --git a/drivers/watchdog/lantiq_wdt.c b/drivers/watchdog/lantiq_wdt.c
+index d3a63be..9c8b10c 100644
+--- a/drivers/watchdog/lantiq_wdt.c
++++ b/drivers/watchdog/lantiq_wdt.c
+@@ -16,7 +16,7 @@
+ #include <linux/clk.h>
+ #include <linux/io.h>
+ 
+-#include <lantiq.h>
++#include <lantiq_soc.h>
+ 
+ /* Section 3.4 of the datasheet
+  * The password sequence protects the WDT control register from unintended
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0003-MIPS-lantiq-change-ltq_request_gpio-call-signature.patch b/target/linux/lantiq/patches-3.3/0003-MIPS-lantiq-change-ltq_request_gpio-call-signature.patch
new file mode 100644
index 0000000000..1a49218bb8
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0003-MIPS-lantiq-change-ltq_request_gpio-call-signature.patch
@@ -0,0 +1,149 @@
+From 834353ea867a84649d452bac03b97ce32dc6e318 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 11 Nov 2011 12:45:24 +0100
+Subject: [PATCH 03/70] MIPS: lantiq: change ltq_request_gpio() call signature
+
+ltq_request_gpio() was using alt0/1 to multiplex the function of GPIO pins.
+This was XWAY specific. In order to also accomodate SoCs that require more bits
+we use a 32bit mask instead. This way the call signature is consistent between
+XWAY and FALC-ON.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+---
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h |    4 +-
+ arch/mips/lantiq/xway/gpio.c                       |    8 ++--
+ arch/mips/lantiq/xway/gpio_stp.c                   |    6 ++--
+ arch/mips/pci/pci-lantiq.c                         |   36 +++++++++----------
+ 4 files changed, 26 insertions(+), 28 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index 9b7ee366..87f6d24 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -135,8 +135,8 @@ extern __iomem void *ltq_ebu_membase;
+ extern __iomem void *ltq_cgu_membase;
+ 
+ /* request a non-gpio and set the PIO config */
+-extern int  ltq_gpio_request(unsigned int pin, unsigned int alt0,
+-	unsigned int alt1, unsigned int dir, const char *name);
++extern int  ltq_gpio_request(unsigned int pin, unsigned int mux,
++				unsigned int dir, const char *name);
+ extern void ltq_pmu_enable(unsigned int module);
+ extern void ltq_pmu_disable(unsigned int module);
+ extern void ltq_cgu_enable(unsigned int clk);
+diff --git a/arch/mips/lantiq/xway/gpio.c b/arch/mips/lantiq/xway/gpio.c
+index d2fa98f..f204f6c 100644
+--- a/arch/mips/lantiq/xway/gpio.c
++++ b/arch/mips/lantiq/xway/gpio.c
+@@ -48,8 +48,8 @@ int irq_to_gpio(unsigned int gpio)
+ }
+ EXPORT_SYMBOL(irq_to_gpio);
+ 
+-int ltq_gpio_request(unsigned int pin, unsigned int alt0,
+-	unsigned int alt1, unsigned int dir, const char *name)
++int ltq_gpio_request(unsigned int pin, unsigned int mux,
++			unsigned int dir, const char *name)
+ {
+ 	int id = 0;
+ 
+@@ -67,13 +67,13 @@ int ltq_gpio_request(unsigned int pin, unsigned int alt0,
+ 		pin -= PINS_PER_PORT;
+ 		id++;
+ 	}
+-	if (alt0)
++	if (mux & 0x2)
+ 		ltq_gpio_setbit(ltq_gpio_port[id].membase,
+ 			LTQ_GPIO_ALTSEL0, pin);
+ 	else
+ 		ltq_gpio_clearbit(ltq_gpio_port[id].membase,
+ 			LTQ_GPIO_ALTSEL0, pin);
+-	if (alt1)
++	if (mux & 0x1)
+ 		ltq_gpio_setbit(ltq_gpio_port[id].membase,
+ 			LTQ_GPIO_ALTSEL1, pin);
+ 	else
+diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c
+index ff9991c..2c78660 100644
+--- a/arch/mips/lantiq/xway/gpio_stp.c
++++ b/arch/mips/lantiq/xway/gpio_stp.c
+@@ -79,9 +79,9 @@ static struct gpio_chip ltq_stp_chip = {
+ static int ltq_stp_hw_init(void)
+ {
+ 	/* the 3 pins used to control the external stp */
+-	ltq_gpio_request(4, 1, 0, 1, "stp-st");
+-	ltq_gpio_request(5, 1, 0, 1, "stp-d");
+-	ltq_gpio_request(6, 1, 0, 1, "stp-sh");
++	ltq_gpio_request(4, 2, 1, "stp-st");
++	ltq_gpio_request(5, 2, 1, "stp-d");
++	ltq_gpio_request(6, 2, 1, "stp-sh");
+ 
+ 	/* sane defaults */
+ 	ltq_stp_w32(0, LTQ_STP_AR);
+diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
+index be1e1af..c001c5a 100644
+--- a/arch/mips/pci/pci-lantiq.c
++++ b/arch/mips/pci/pci-lantiq.c
+@@ -70,28 +70,27 @@
+ 
+ struct ltq_pci_gpio_map {
+ 	int pin;
+-	int alt0;
+-	int alt1;
++	int mux;
+ 	int dir;
+ 	char *name;
+ };
+ 
+ /* the pci core can make use of the following gpios */
+ static struct ltq_pci_gpio_map ltq_pci_gpio_map[] = {
+-	{ 0, 1, 0, 0, "pci-exin0" },
+-	{ 1, 1, 0, 0, "pci-exin1" },
+-	{ 2, 1, 0, 0, "pci-exin2" },
+-	{ 39, 1, 0, 0, "pci-exin3" },
+-	{ 10, 1, 0, 0, "pci-exin4" },
+-	{ 9, 1, 0, 0, "pci-exin5" },
+-	{ 30, 1, 0, 1, "pci-gnt1" },
+-	{ 23, 1, 0, 1, "pci-gnt2" },
+-	{ 19, 1, 0, 1, "pci-gnt3" },
+-	{ 38, 1, 0, 1, "pci-gnt4" },
+-	{ 29, 1, 0, 0, "pci-req1" },
+-	{ 31, 1, 0, 0, "pci-req2" },
+-	{ 3, 1, 0, 0, "pci-req3" },
+-	{ 37, 1, 0, 0, "pci-req4" },
++	{ 0, 2, 0, "pci-exin0" },
++	{ 1, 2, 0, "pci-exin1" },
++	{ 2, 2, 0, "pci-exin2" },
++	{ 39, 2, 0, "pci-exin3" },
++	{ 10, 2, 0, "pci-exin4" },
++	{ 9, 2, 0, "pci-exin5" },
++	{ 30, 2, 1, "pci-gnt1" },
++	{ 23, 2, 1, "pci-gnt2" },
++	{ 19, 2, 1, "pci-gnt3" },
++	{ 38, 2, 1, "pci-gnt4" },
++	{ 29, 2, 0, "pci-req1" },
++	{ 31, 2, 0, "pci-req2" },
++	{ 3, 2, 0, "pci-req3" },
++	{ 37, 2, 0, "pci-req4" },
+ };
+ 
+ __iomem void *ltq_pci_mapped_cfg;
+@@ -157,13 +156,12 @@ static void ltq_pci_setup_gpio(int gpio)
+ 	for (i = 0; i < ARRAY_SIZE(ltq_pci_gpio_map); i++) {
+ 		if (gpio & (1 << i)) {
+ 			ltq_gpio_request(ltq_pci_gpio_map[i].pin,
+-				ltq_pci_gpio_map[i].alt0,
+-				ltq_pci_gpio_map[i].alt1,
++				ltq_pci_gpio_map[i].mux,
+ 				ltq_pci_gpio_map[i].dir,
+ 				ltq_pci_gpio_map[i].name);
+ 		}
+ 	}
+-	ltq_gpio_request(21, 0, 0, 1, "pci-reset");
++	ltq_gpio_request(21, 0, 1, "pci-reset");
+ 	ltq_pci_req_mask = (gpio >> PCI_REQ_SHIFT) & PCI_REQ_MASK;
+ }
+ 
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0004-MIPS-lantiq-make-irq.c-support-the-FALC-ON.patch b/target/linux/lantiq/patches-3.3/0004-MIPS-lantiq-make-irq.c-support-the-FALC-ON.patch
new file mode 100644
index 0000000000..f313ff30dc
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0004-MIPS-lantiq-make-irq.c-support-the-FALC-ON.patch
@@ -0,0 +1,73 @@
+From 9eabaa2969af9aa157d50b7cfbb447f65db95f06 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 11 Aug 2011 12:25:55 +0200
+Subject: [PATCH 04/70] MIPS: lantiq: make irq.c support the FALC-ON
+
+There are minor differences in how irqs work on xway and falcon socs.
+Xway needs 2 quirks that we need to disable for falcon to also work with
+this code.
+
+* EBU irq does not need to send a special ack to the EBU
+* The EIU does not exist
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/lantiq/irq.c |   24 +++++++++++++-----------
+ 1 files changed, 13 insertions(+), 11 deletions(-)
+
+diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
+index d673731..f56bcce 100644
+--- a/arch/mips/lantiq/irq.c
++++ b/arch/mips/lantiq/irq.c
+@@ -195,7 +195,7 @@ static void ltq_hw_irqdispatch(int module)
+ 	do_IRQ((int)irq + INT_NUM_IM0_IRL0 + (INT_NUM_IM_OFFSET * module));
+ 
+ 	/* if this is a EBU irq, we need to ack it or get a deadlock */
+-	if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0))
++	if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0) && LTQ_EBU_PCC_ISTAT)
+ 		ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_ISTAT) | 0x10,
+ 			LTQ_EBU_PCC_ISTAT);
+ }
+@@ -259,17 +259,19 @@ void __init arch_init_irq(void)
+ 	if (!ltq_icu_membase)
+ 		panic("Failed to remap icu memory");
+ 
+-	if (insert_resource(&iomem_resource, &ltq_eiu_resource) < 0)
+-		panic("Failed to insert eiu memory");
++	if (LTQ_EIU_BASE_ADDR) {
++		if (insert_resource(&iomem_resource, &ltq_eiu_resource) < 0)
++			panic("Failed to insert eiu memory\n");
+ 
+-	if (request_mem_region(ltq_eiu_resource.start,
+-			resource_size(&ltq_eiu_resource), "eiu") < 0)
+-		panic("Failed to request eiu memory");
++		if (request_mem_region(ltq_eiu_resource.start,
++				resource_size(&ltq_eiu_resource), "eiu") < 0)
++			panic("Failed to request eiu memory\n");
+ 
+-	ltq_eiu_membase = ioremap_nocache(ltq_eiu_resource.start,
++		ltq_eiu_membase = ioremap_nocache(ltq_eiu_resource.start,
+ 				resource_size(&ltq_eiu_resource));
+-	if (!ltq_eiu_membase)
+-		panic("Failed to remap eiu memory");
++		if (!ltq_eiu_membase)
++			panic("Failed to remap eiu memory\n");
++	}
+ 
+ 	/* make sure all irqs are turned off by default */
+ 	for (i = 0; i < 5; i++)
+@@ -295,8 +297,8 @@ void __init arch_init_irq(void)
+ 
+ 	for (i = INT_NUM_IRQ0;
+ 		i <= (INT_NUM_IRQ0 + (5 * INT_NUM_IM_OFFSET)); i++)
+-		if ((i == LTQ_EIU_IR0) || (i == LTQ_EIU_IR1) ||
+-			(i == LTQ_EIU_IR2))
++		if (((i == LTQ_EIU_IR0) || (i == LTQ_EIU_IR1) ||
++			(i == LTQ_EIU_IR2)) && LTQ_EIU_BASE_ADDR)
+ 			irq_set_chip_and_handler(i, &ltq_eiu_type,
+ 				handle_level_irq);
+ 		/* EIU3-5 only exist on ar9 and vr9 */
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0005-MIPS-lantiq-add-basic-support-for-FALC-ON.patch b/target/linux/lantiq/patches-3.3/0005-MIPS-lantiq-add-basic-support-for-FALC-ON.patch
new file mode 100644
index 0000000000..d05ebfaad2
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0005-MIPS-lantiq-add-basic-support-for-FALC-ON.patch
@@ -0,0 +1,1088 @@
+From 53e05f3689ec846c2a89d16d3f74bac6c7de81ee Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 11 Aug 2011 14:33:04 +0200
+Subject: [PATCH 05/70] MIPS: lantiq: add basic support for FALC-ON
+
+Adds support for the FALC-ON SoC. This SoC is from the FTTH/GPON SoC family.
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ .../include/asm/mach-lantiq/falcon/falcon_irq.h    |  268 ++++++++++++++++++++
+ arch/mips/include/asm/mach-lantiq/falcon/irq.h     |   18 ++
+ .../include/asm/mach-lantiq/falcon/lantiq_soc.h    |  143 +++++++++++
+ arch/mips/include/asm/mach-lantiq/lantiq.h         |    1 +
+ arch/mips/lantiq/Kconfig                           |    4 +
+ arch/mips/lantiq/Makefile                          |    1 +
+ arch/mips/lantiq/Platform                          |    1 +
+ arch/mips/lantiq/falcon/Makefile                   |    1 +
+ arch/mips/lantiq/falcon/clk.c                      |   44 ++++
+ arch/mips/lantiq/falcon/devices.c                  |   87 +++++++
+ arch/mips/lantiq/falcon/devices.h                  |   18 ++
+ arch/mips/lantiq/falcon/prom.c                     |   93 +++++++
+ arch/mips/lantiq/falcon/reset.c                    |   87 +++++++
+ arch/mips/lantiq/falcon/sysctrl.c                  |  183 +++++++++++++
+ 14 files changed, 949 insertions(+), 0 deletions(-)
+ create mode 100644 arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h
+ create mode 100644 arch/mips/include/asm/mach-lantiq/falcon/irq.h
+ create mode 100644 arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+ create mode 100644 arch/mips/lantiq/falcon/Makefile
+ create mode 100644 arch/mips/lantiq/falcon/clk.c
+ create mode 100644 arch/mips/lantiq/falcon/devices.c
+ create mode 100644 arch/mips/lantiq/falcon/devices.h
+ create mode 100644 arch/mips/lantiq/falcon/prom.c
+ create mode 100644 arch/mips/lantiq/falcon/reset.c
+ create mode 100644 arch/mips/lantiq/falcon/sysctrl.c
+
+diff --git a/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h b/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h
+new file mode 100644
+index 0000000..4dc6466
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h
+@@ -0,0 +1,268 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com>
++ */
++
++#ifndef _FALCON_IRQ__
++#define _FALCON_IRQ__
++
++#define INT_NUM_IRQ0			8
++#define INT_NUM_IM0_IRL0		(INT_NUM_IRQ0 + 0)
++#define INT_NUM_IM1_IRL0		(INT_NUM_IM0_IRL0 + 32)
++#define INT_NUM_IM2_IRL0		(INT_NUM_IM1_IRL0 + 32)
++#define INT_NUM_IM3_IRL0		(INT_NUM_IM2_IRL0 + 32)
++#define INT_NUM_IM4_IRL0		(INT_NUM_IM3_IRL0 + 32)
++#define INT_NUM_EXTRA_START		(INT_NUM_IM4_IRL0 + 32)
++#define INT_NUM_IM_OFFSET		(INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0)
++
++#define MIPS_CPU_TIMER_IRQ			7
++
++/* HOST IF Event Interrupt */
++#define FALCON_IRQ_HOST				(INT_NUM_IM0_IRL0 + 0)
++/* HOST IF Mailbox0 Receive Interrupt */
++#define FALCON_IRQ_HOST_MB0_RX			(INT_NUM_IM0_IRL0 + 1)
++/* HOST IF Mailbox0 Transmit Interrupt */
++#define FALCON_IRQ_HOST_MB0_TX			(INT_NUM_IM0_IRL0 + 2)
++/* HOST IF Mailbox1 Receive Interrupt */
++#define FALCON_IRQ_HOST_MB1_RX			(INT_NUM_IM0_IRL0 + 3)
++/* HOST IF Mailbox1 Transmit Interrupt */
++#define FALCON_IRQ_HOST_MB1_TX			(INT_NUM_IM0_IRL0 + 4)
++/* I2C Last Single Data Transfer Request */
++#define FALCON_IRQ_I2C_LSREQ			(INT_NUM_IM0_IRL0 + 8)
++/* I2C Single Data Transfer Request */
++#define FALCON_IRQ_I2C_SREQ			(INT_NUM_IM0_IRL0 + 9)
++/* I2C Last Burst Data Transfer Request */
++#define FALCON_IRQ_I2C_LBREQ			(INT_NUM_IM0_IRL0 + 10)
++/* I2C Burst Data Transfer Request */
++#define FALCON_IRQ_I2C_BREQ			(INT_NUM_IM0_IRL0 + 11)
++/* I2C Error Interrupt */
++#define FALCON_IRQ_I2C_I2C_ERR			(INT_NUM_IM0_IRL0 + 12)
++/* I2C Protocol Interrupt */
++#define FALCON_IRQ_I2C_I2C_P			(INT_NUM_IM0_IRL0 + 13)
++/* SSC Transmit Interrupt */
++#define FALCON_IRQ_SSC_T			(INT_NUM_IM0_IRL0 + 14)
++/* SSC Receive Interrupt */
++#define FALCON_IRQ_SSC_R			(INT_NUM_IM0_IRL0 + 15)
++/* SSC Error Interrupt */
++#define FALCON_IRQ_SSC_E			(INT_NUM_IM0_IRL0 + 16)
++/* SSC Frame Interrupt */
++#define FALCON_IRQ_SSC_F			(INT_NUM_IM0_IRL0 + 17)
++/* Advanced Encryption Standard Interrupt */
++#define FALCON_IRQ_AES_AES			(INT_NUM_IM0_IRL0 + 27)
++/* Secure Hash Algorithm Interrupt */
++#define FALCON_IRQ_SHA_HASH			(INT_NUM_IM0_IRL0 + 28)
++/* PCM Receive Interrupt */
++#define FALCON_IRQ_PCM_RX			(INT_NUM_IM0_IRL0 + 29)
++/* PCM Transmit Interrupt */
++#define FALCON_IRQ_PCM_TX			(INT_NUM_IM0_IRL0 + 30)
++/* PCM Transmit Crash Interrupt */
++#define FALCON_IRQ_PCM_HW2_CRASH		(INT_NUM_IM0_IRL0 + 31)
++
++/* EBU Serial Flash Command Error */
++#define FALCON_IRQ_EBU_SF_CMDERR		(INT_NUM_IM1_IRL0 + 0)
++/* EBU Serial Flash Command Overwrite Error */
++#define FALCON_IRQ_EBU_SF_COVERR		(INT_NUM_IM1_IRL0 + 1)
++/* EBU Serial Flash Busy */
++#define FALCON_IRQ_EBU_SF_BUSY			(INT_NUM_IM1_IRL0 + 2)
++/* External Interrupt from GPIO P0 */
++#define FALCON_IRQ_GPIO_P0			(INT_NUM_IM1_IRL0 + 4)
++/* External Interrupt from GPIO P1 */
++#define FALCON_IRQ_GPIO_P1			(INT_NUM_IM1_IRL0 + 5)
++/* External Interrupt from GPIO P2 */
++#define FALCON_IRQ_GPIO_P2			(INT_NUM_IM1_IRL0 + 6)
++/* External Interrupt from GPIO P3 */
++#define FALCON_IRQ_GPIO_P3			(INT_NUM_IM1_IRL0 + 7)
++/* External Interrupt from GPIO P4 */
++#define FALCON_IRQ_GPIO_P4			(INT_NUM_IM1_IRL0 + 8)
++/* 8kHz backup interrupt derived from core-PLL */
++#define FALCON_IRQ_FSC_BKP			(INT_NUM_IM1_IRL0 + 10)
++/* FSC Timer Interrupt 0 */
++#define FALCON_IRQ_FSCT_CMP0			(INT_NUM_IM1_IRL0 + 11)
++/* FSC Timer Interrupt 1 */
++#define FALCON_IRQ_FSCT_CMP1			(INT_NUM_IM1_IRL0 + 12)
++/* 8kHz root interrupt derived from GPON interface */
++#define FALCON_IRQ_FSC_ROOT			(INT_NUM_IM1_IRL0 + 13)
++/* Time of Day */
++#define FALCON_IRQ_TOD				(INT_NUM_IM1_IRL0 + 14)
++/* PMA Interrupt from IntNode of the 200MHz Domain */
++#define FALCON_IRQ_PMA_200M			(INT_NUM_IM1_IRL0 + 15)
++/* PMA Interrupt from IntNode of the TX Clk Domain */
++#define FALCON_IRQ_PMA_TX			(INT_NUM_IM1_IRL0 + 16)
++/* PMA Interrupt from IntNode of the RX Clk Domain */
++#define FALCON_IRQ_PMA_RX			(INT_NUM_IM1_IRL0 + 17)
++/* SYS1 Interrupt */
++#define FALCON_IRQ_SYS1				(INT_NUM_IM1_IRL0 + 20)
++/* SYS GPE Interrupt */
++#define FALCON_IRQ_SYS_GPE			(INT_NUM_IM1_IRL0 + 21)
++/* Watchdog Access Error Interrupt */
++#define FALCON_IRQ_WDT_AEIR			(INT_NUM_IM1_IRL0 + 24)
++/* Watchdog Prewarning Interrupt */
++#define FALCON_IRQ_WDT_PIR			(INT_NUM_IM1_IRL0 + 25)
++/* SBIU interrupt */
++#define FALCON_IRQ_SBIU0			(INT_NUM_IM1_IRL0 + 27)
++/* FPI Bus Control Unit Interrupt */
++#define FALCON_IRQ_BCU0				(INT_NUM_IM1_IRL0 + 29)
++/* DDR Controller Interrupt */
++#define FALCON_IRQ_DDR				(INT_NUM_IM1_IRL0 + 30)
++/* Crossbar Error Interrupt */
++#define FALCON_IRQ_XBAR_ERROR			(INT_NUM_IM1_IRL0 + 31)
++
++/* ICTRLL 0 Interrupt */
++#define FALCON_IRQ_ICTRLL0			(INT_NUM_IM2_IRL0 + 0)
++/* ICTRLL 1 Interrupt */
++#define FALCON_IRQ_ICTRLL1			(INT_NUM_IM2_IRL0 + 1)
++/* ICTRLL 2 Interrupt */
++#define FALCON_IRQ_ICTRLL2			(INT_NUM_IM2_IRL0 + 2)
++/* ICTRLL 3 Interrupt */
++#define FALCON_IRQ_ICTRLL3			(INT_NUM_IM2_IRL0 + 3)
++/* OCTRLL 0 Interrupt */
++#define FALCON_IRQ_OCTRLL0			(INT_NUM_IM2_IRL0 + 4)
++/* OCTRLL 1 Interrupt */
++#define FALCON_IRQ_OCTRLL1			(INT_NUM_IM2_IRL0 + 5)
++/* OCTRLL 2 Interrupt */
++#define FALCON_IRQ_OCTRLL2			(INT_NUM_IM2_IRL0 + 6)
++/* OCTRLL 3 Interrupt */
++#define FALCON_IRQ_OCTRLL3			(INT_NUM_IM2_IRL0 + 7)
++/* OCTRLG Interrupt */
++#define FALCON_IRQ_OCTRLG			(INT_NUM_IM2_IRL0 + 9)
++/* IQM Interrupt */
++#define FALCON_IRQ_IQM				(INT_NUM_IM2_IRL0 + 10)
++/* FSQM Interrupt */
++#define FALCON_IRQ_FSQM				(INT_NUM_IM2_IRL0 + 11)
++/* TMU Interrupt */
++#define FALCON_IRQ_TMU				(INT_NUM_IM2_IRL0 + 12)
++/* LINK1 Interrupt */
++#define FALCON_IRQ_LINK1			(INT_NUM_IM2_IRL0 + 14)
++/* ICTRLC 0 Interrupt */
++#define FALCON_IRQ_ICTRLC0			(INT_NUM_IM2_IRL0 + 16)
++/* ICTRLC 1 Interrupt */
++#define FALCON_IRQ_ICTRLC1			(INT_NUM_IM2_IRL0 + 17)
++/* OCTRLC Interrupt */
++#define FALCON_IRQ_OCTRLC			(INT_NUM_IM2_IRL0 + 18)
++/* CONFIG Break Interrupt */
++#define FALCON_IRQ_CONFIG_BREAK			(INT_NUM_IM2_IRL0 + 19)
++/* CONFIG Interrupt */
++#define FALCON_IRQ_CONFIG			(INT_NUM_IM2_IRL0 + 20)
++/* Dispatcher Interrupt */
++#define FALCON_IRQ_DISP				(INT_NUM_IM2_IRL0 + 21)
++/* TBM Interrupt */
++#define FALCON_IRQ_TBM				(INT_NUM_IM2_IRL0 + 22)
++/* GTC Downstream Interrupt */
++#define FALCON_IRQ_GTC_DS			(INT_NUM_IM2_IRL0 + 29)
++/* GTC Upstream Interrupt */
++#define FALCON_IRQ_GTC_US			(INT_NUM_IM2_IRL0 + 30)
++/* EIM Interrupt */
++#define FALCON_IRQ_EIM				(INT_NUM_IM2_IRL0 + 31)
++
++/* ASC0 Transmit Interrupt */
++#define FALCON_IRQ_ASC0_T			(INT_NUM_IM3_IRL0 + 0)
++/* ASC0 Receive Interrupt */
++#define FALCON_IRQ_ASC0_R			(INT_NUM_IM3_IRL0 + 1)
++/* ASC0 Error Interrupt */
++#define FALCON_IRQ_ASC0_E			(INT_NUM_IM3_IRL0 + 2)
++/* ASC0 Transmit Buffer Interrupt */
++#define FALCON_IRQ_ASC0_TB			(INT_NUM_IM3_IRL0 + 3)
++/* ASC0 Autobaud Start Interrupt */
++#define FALCON_IRQ_ASC0_ABST			(INT_NUM_IM3_IRL0 + 4)
++/* ASC0 Autobaud Detection Interrupt */
++#define FALCON_IRQ_ASC0_ABDET			(INT_NUM_IM3_IRL0 + 5)
++/* ASC1 Modem Status Interrupt */
++#define FALCON_IRQ_ASC0_MS			(INT_NUM_IM3_IRL0 + 6)
++/* ASC0 Soft Flow Control Interrupt */
++#define FALCON_IRQ_ASC0_SFC			(INT_NUM_IM3_IRL0 + 7)
++/* ASC1 Transmit Interrupt */
++#define FALCON_IRQ_ASC1_T			(INT_NUM_IM3_IRL0 + 8)
++/* ASC1 Receive Interrupt */
++#define FALCON_IRQ_ASC1_R			(INT_NUM_IM3_IRL0 + 9)
++/* ASC1 Error Interrupt */
++#define FALCON_IRQ_ASC1_E			(INT_NUM_IM3_IRL0 + 10)
++/* ASC1 Transmit Buffer Interrupt */
++#define FALCON_IRQ_ASC1_TB			(INT_NUM_IM3_IRL0 + 11)
++/* ASC1 Autobaud Start Interrupt */
++#define FALCON_IRQ_ASC1_ABST			(INT_NUM_IM3_IRL0 + 12)
++/* ASC1 Autobaud Detection Interrupt */
++#define FALCON_IRQ_ASC1_ABDET			(INT_NUM_IM3_IRL0 + 13)
++/* ASC1 Modem Status Interrupt */
++#define FALCON_IRQ_ASC1_MS			(INT_NUM_IM3_IRL0 + 14)
++/* ASC1 Soft Flow Control Interrupt */
++#define FALCON_IRQ_ASC1_SFC			(INT_NUM_IM3_IRL0 + 15)
++/* GPTC Timer/Counter 1A Interrupt */
++#define FALCON_IRQ_GPTC_TC1A			(INT_NUM_IM3_IRL0 + 16)
++/* GPTC Timer/Counter 1B Interrupt */
++#define FALCON_IRQ_GPTC_TC1B			(INT_NUM_IM3_IRL0 + 17)
++/* GPTC Timer/Counter 2A Interrupt */
++#define FALCON_IRQ_GPTC_TC2A			(INT_NUM_IM3_IRL0 + 18)
++/* GPTC Timer/Counter 2B Interrupt */
++#define FALCON_IRQ_GPTC_TC2B			(INT_NUM_IM3_IRL0 + 19)
++/* GPTC Timer/Counter 3A Interrupt */
++#define FALCON_IRQ_GPTC_TC3A			(INT_NUM_IM3_IRL0 + 20)
++/* GPTC Timer/Counter 3B Interrupt */
++#define FALCON_IRQ_GPTC_TC3B			(INT_NUM_IM3_IRL0 + 21)
++/* DFEV0, Channel 1 Transmit Interrupt */
++#define FALCON_IRQ_DFEV0_2TX			(INT_NUM_IM3_IRL0 + 26)
++/* DFEV0, Channel 1 Receive Interrupt */
++#define FALCON_IRQ_DFEV0_2RX			(INT_NUM_IM3_IRL0 + 27)
++/* DFEV0, Channel 1 General Purpose Interrupt */
++#define FALCON_IRQ_DFEV0_2GP			(INT_NUM_IM3_IRL0 + 28)
++/* DFEV0, Channel 0 Transmit Interrupt */
++#define FALCON_IRQ_DFEV0_1TX			(INT_NUM_IM3_IRL0 + 29)
++/* DFEV0, Channel 0 Receive Interrupt */
++#define FALCON_IRQ_DFEV0_1RX			(INT_NUM_IM3_IRL0 + 30)
++/* DFEV0, Channel 0 General Purpose Interrupt */
++#define FALCON_IRQ_DFEV0_1GP			(INT_NUM_IM3_IRL0 + 31)
++
++/* ICTRLL 0 Error */
++#define FALCON_IRQ_ICTRLL0_ERR			(INT_NUM_IM4_IRL0 + 0)
++/* ICTRLL 1 Error */
++#define FALCON_IRQ_ICTRLL1_ERR			(INT_NUM_IM4_IRL0 + 1)
++/* ICTRLL 2 Error */
++#define FALCON_IRQ_ICTRLL2_ERR			(INT_NUM_IM4_IRL0 + 2)
++/* ICTRLL 3 Error */
++#define FALCON_IRQ_ICTRLL3_ERR			(INT_NUM_IM4_IRL0 + 3)
++/* OCTRLL 0 Error */
++#define FALCON_IRQ_OCTRLL0_ERR			(INT_NUM_IM4_IRL0 + 4)
++/* OCTRLL 1 Error */
++#define FALCON_IRQ_OCTRLL1_ERR			(INT_NUM_IM4_IRL0 + 5)
++/* OCTRLL 2 Error */
++#define FALCON_IRQ_OCTRLL2_ERR			(INT_NUM_IM4_IRL0 + 6)
++/* OCTRLL 3 Error */
++#define FALCON_IRQ_OCTRLL3_ERR			(INT_NUM_IM4_IRL0 + 7)
++/* ICTRLG Error */
++#define FALCON_IRQ_ICTRLG_ERR			(INT_NUM_IM4_IRL0 + 8)
++/* OCTRLG Error */
++#define FALCON_IRQ_OCTRLG_ERR			(INT_NUM_IM4_IRL0 + 9)
++/* IQM Error */
++#define FALCON_IRQ_IQM_ERR			(INT_NUM_IM4_IRL0 + 10)
++/* FSQM Error */
++#define FALCON_IRQ_FSQM_ERR			(INT_NUM_IM4_IRL0 + 11)
++/* TMU Error */
++#define FALCON_IRQ_TMU_ERR			(INT_NUM_IM4_IRL0 + 12)
++/* MPS Status Interrupt #0 (VPE1 to VPE0) */
++#define FALCON_IRQ_MPS_IR0			(INT_NUM_IM4_IRL0 + 14)
++/* MPS Status Interrupt #1 (VPE1 to VPE0) */
++#define FALCON_IRQ_MPS_IR1			(INT_NUM_IM4_IRL0 + 15)
++/* MPS Status Interrupt #2 (VPE1 to VPE0) */
++#define FALCON_IRQ_MPS_IR2			(INT_NUM_IM4_IRL0 + 16)
++/* MPS Status Interrupt #3 (VPE1 to VPE0) */
++#define FALCON_IRQ_MPS_IR3			(INT_NUM_IM4_IRL0 + 17)
++/* MPS Status Interrupt #4 (VPE1 to VPE0) */
++#define FALCON_IRQ_MPS_IR4			(INT_NUM_IM4_IRL0 + 18)
++/* MPS Status Interrupt #5 (VPE1 to VPE0) */
++#define FALCON_IRQ_MPS_IR5			(INT_NUM_IM4_IRL0 + 19)
++/* MPS Status Interrupt #6 (VPE1 to VPE0) */
++#define FALCON_IRQ_MPS_IR6			(INT_NUM_IM4_IRL0 + 20)
++/* MPS Status Interrupt #7 (VPE1 to VPE0) */
++#define FALCON_IRQ_MPS_IR7			(INT_NUM_IM4_IRL0 + 21)
++/* MPS Status Interrupt #8 (VPE1 to VPE0) */
++#define FALCON_IRQ_MPS_IR8			(INT_NUM_IM4_IRL0 + 22)
++/* VPE0 Exception Level Flag Interrupt */
++#define FALCON_IRQ_VPE0_EXL			(INT_NUM_IM4_IRL0 + 29)
++/* VPE0 Error Level Flag Interrupt */
++#define FALCON_IRQ_VPE0_ERL			(INT_NUM_IM4_IRL0 + 30)
++/* VPE0 Performance Monitoring Counter Interrupt */
++#define FALCON_IRQ_VPE0_PMCIR			(INT_NUM_IM4_IRL0 + 31)
++
++#endif /* _FALCON_IRQ__ */
+diff --git a/arch/mips/include/asm/mach-lantiq/falcon/irq.h b/arch/mips/include/asm/mach-lantiq/falcon/irq.h
+new file mode 100644
+index 0000000..2caccd9
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/falcon/irq.h
+@@ -0,0 +1,18 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
++ */
++
++#ifndef __FALCON_IRQ_H
++#define __FALCON_IRQ_H
++
++#include <falcon_irq.h>
++
++#define NR_IRQS 328
++
++#include_next <irq.h>
++
++#endif
+diff --git a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+new file mode 100644
+index 0000000..b074748
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+@@ -0,0 +1,143 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _LTQ_FALCON_H__
++#define _LTQ_FALCON_H__
++
++#ifdef CONFIG_SOC_FALCON
++
++#include <lantiq.h>
++
++/* Chip IDs */
++#define SOC_ID_FALCON		0x01B8
++
++/* SoC Types */
++#define SOC_TYPE_FALCON		0x01
++
++/* ASC0/1 - serial port */
++#define LTQ_ASC0_BASE_ADDR	0x1E100C00
++#define LTQ_ASC1_BASE_ADDR	0x1E100B00
++#define LTQ_ASC_SIZE		0x100
++
++#define LTQ_ASC_TIR(x)          (INT_NUM_IM3_IRL0 + (x * 8))
++#define LTQ_ASC_RIR(x)          (INT_NUM_IM3_IRL0 + (x * 8) + 1)
++#define LTQ_ASC_EIR(x)          (INT_NUM_IM3_IRL0 + (x * 8) + 2)
++
++/*
++ * during early_printk no ioremap possible at this early stage
++ * lets use KSEG1 instead
++ */
++#define LTQ_EARLY_ASC		KSEG1ADDR(LTQ_ASC0_BASE_ADDR)
++
++/* ICU - interrupt control unit */
++#define LTQ_ICU_BASE_ADDR	0x1F880200
++#define LTQ_ICU_SIZE		0x100
++
++/* WDT */
++#define LTQ_WDT_BASE_ADDR	0x1F8803F0
++#define LTQ_WDT_SIZE		0x10
++
++#define LTQ_RST_CAUSE_WDTRST	0x0002
++
++/* EBU - external bus unit */
++#define LTQ_EBU_BASE_ADDR       0x18000000
++#define LTQ_EBU_SIZE            0x0100
++
++#define LTQ_EBU_MODCON  0x000C
++
++/* GPIO */
++#define LTQ_GPIO0_BASE_ADDR     0x1D810000
++#define LTQ_GPIO0_SIZE          0x0080
++#define LTQ_GPIO1_BASE_ADDR     0x1E800100
++#define LTQ_GPIO1_SIZE          0x0080
++#define LTQ_GPIO2_BASE_ADDR     0x1D810100
++#define LTQ_GPIO2_SIZE          0x0080
++#define LTQ_GPIO3_BASE_ADDR     0x1E800200
++#define LTQ_GPIO3_SIZE          0x0080
++#define LTQ_GPIO4_BASE_ADDR     0x1E800300
++#define LTQ_GPIO4_SIZE          0x0080
++#define LTQ_PADCTRL0_BASE_ADDR  0x1DB01000
++#define LTQ_PADCTRL0_SIZE       0x0100
++#define LTQ_PADCTRL1_BASE_ADDR  0x1E800400
++#define LTQ_PADCTRL1_SIZE       0x0100
++#define LTQ_PADCTRL2_BASE_ADDR  0x1DB02000
++#define LTQ_PADCTRL2_SIZE       0x0100
++#define LTQ_PADCTRL3_BASE_ADDR  0x1E800500
++#define LTQ_PADCTRL3_SIZE       0x0100
++#define LTQ_PADCTRL4_BASE_ADDR  0x1E800600
++#define LTQ_PADCTRL4_SIZE       0x0100
++
++/* CHIP ID */
++#define LTQ_STATUS_BASE_ADDR	0x1E802000
++
++#define LTQ_FALCON_CHIPID	((u32 *)(KSEG1 + LTQ_STATUS_BASE_ADDR + 0x0c))
++#define LTQ_FALCON_CHIPTYPE	((u32 *)(KSEG1 + LTQ_STATUS_BASE_ADDR + 0x38))
++#define LTQ_FALCON_CHIPCONF	((u32 *)(KSEG1 + LTQ_STATUS_BASE_ADDR + 0x40))
++
++/* SYSCTL - start/stop/restart/configure/... different parts of the Soc */
++#define LTQ_SYS1_BASE_ADDR      0x1EF00000
++#define LTQ_SYS1_SIZE           0x0100
++#define LTQ_STATUS_BASE_ADDR	0x1E802000
++#define LTQ_STATUS_SIZE		0x0080
++#define LTQ_SYS_ETH_BASE_ADDR	0x1DB00000
++#define LTQ_SYS_ETH_SIZE	0x0100
++#define LTQ_SYS_GPE_BASE_ADDR	0x1D700000
++#define LTQ_SYS_GPE_SIZE	0x0100
++
++#define SYSCTL_SYS1		0
++#define SYSCTL_SYSETH		1
++#define SYSCTL_SYSGPE		2
++
++/* Activation Status Register */
++#define ACTS_ASC1_ACT	0x00000800
++#define ACTS_P0		0x00010000
++#define ACTS_P1		0x00010000
++#define ACTS_P2		0x00020000
++#define ACTS_P3		0x00020000
++#define ACTS_P4		0x00040000
++#define ACTS_PADCTRL0	0x00100000
++#define ACTS_PADCTRL1	0x00100000
++#define ACTS_PADCTRL2	0x00200000
++#define ACTS_PADCTRL3	0x00200000
++#define ACTS_PADCTRL4	0x00400000
++
++extern void ltq_sysctl_activate(int module, unsigned int mask);
++extern void ltq_sysctl_deactivate(int module, unsigned int mask);
++extern void ltq_sysctl_clken(int module, unsigned int mask);
++extern void ltq_sysctl_clkdis(int module, unsigned int mask);
++extern void ltq_sysctl_reboot(int module, unsigned int mask);
++extern int ltq_gpe_is_activated(unsigned int mask);
++
++/* global register ranges */
++extern __iomem void *ltq_ebu_membase;
++extern __iomem void *ltq_sys1_membase;
++#define ltq_ebu_w32(x, y)	ltq_w32((x), ltq_ebu_membase + (y))
++#define ltq_ebu_r32(x)		ltq_r32(ltq_ebu_membase + (x))
++#define ltq_ebu_w32_mask(clear, set, reg)   \
++	ltq_ebu_w32((ltq_ebu_r32(reg) & ~(clear)) | (set), reg)
++
++#define ltq_sys1_w32(x, y)	ltq_w32((x), ltq_sys1_membase + (y))
++#define ltq_sys1_r32(x)		ltq_r32(ltq_sys1_membase + (x))
++#define ltq_sys1_w32_mask(clear, set, reg)   \
++	ltq_sys1_w32((ltq_sys1_r32(reg) & ~(clear)) | (set), reg)
++
++/* gpio_request wrapper to help configure the pin */
++extern int  ltq_gpio_request(unsigned int pin, unsigned int mux,
++				unsigned int dir, const char *name);
++extern int ltq_gpio_mux_set(unsigned int pin, unsigned int mux);
++
++/* to keep the irq code generic we need to define these to 0 as falcon
++   has no EIU/EBU */
++#define LTQ_EIU_BASE_ADDR	0
++#define LTQ_EBU_PCC_ISTAT	0
++
++#define ltq_is_ar9()	0
++#define ltq_is_vr9()	0
++
++#endif /* CONFIG_SOC_FALCON */
++#endif /* _LTQ_XWAY_H__ */
+diff --git a/arch/mips/include/asm/mach-lantiq/lantiq.h b/arch/mips/include/asm/mach-lantiq/lantiq.h
+index 66d7300..188de0f 100644
+--- a/arch/mips/include/asm/mach-lantiq/lantiq.h
++++ b/arch/mips/include/asm/mach-lantiq/lantiq.h
+@@ -25,6 +25,7 @@ extern unsigned int ltq_get_soc_type(void);
+ /* clock speeds */
+ #define CLOCK_60M	60000000
+ #define CLOCK_83M	83333333
++#define CLOCK_100M	100000000
+ #define CLOCK_111M	111111111
+ #define CLOCK_133M	133333333
+ #define CLOCK_167M	166666667
+diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
+index 3fccf21..cb6b39f 100644
+--- a/arch/mips/lantiq/Kconfig
++++ b/arch/mips/lantiq/Kconfig
+@@ -16,8 +16,12 @@ config SOC_XWAY
+ 	bool "XWAY"
+ 	select SOC_TYPE_XWAY
+ 	select HW_HAS_PCI
++
++config SOC_FALCON
++	bool "FALCON"
+ endchoice
+ 
+ source "arch/mips/lantiq/xway/Kconfig"
++source "arch/mips/lantiq/falcon/Kconfig"
+ 
+ endif
+diff --git a/arch/mips/lantiq/Makefile b/arch/mips/lantiq/Makefile
+index e5dae0e..7e9c69e 100644
+--- a/arch/mips/lantiq/Makefile
++++ b/arch/mips/lantiq/Makefile
+@@ -9,3 +9,4 @@ obj-y := irq.o setup.o clk.o prom.o devices.o
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+ 
+ obj-$(CONFIG_SOC_TYPE_XWAY) += xway/
++obj-$(CONFIG_SOC_FALCON) += falcon/
+diff --git a/arch/mips/lantiq/Platform b/arch/mips/lantiq/Platform
+index f3dff05..b3ec498 100644
+--- a/arch/mips/lantiq/Platform
++++ b/arch/mips/lantiq/Platform
+@@ -6,3 +6,4 @@ platform-$(CONFIG_LANTIQ)	+= lantiq/
+ cflags-$(CONFIG_LANTIQ)		+= -I$(srctree)/arch/mips/include/asm/mach-lantiq
+ load-$(CONFIG_LANTIQ)		= 0xffffffff80002000
+ cflags-$(CONFIG_SOC_TYPE_XWAY)	+= -I$(srctree)/arch/mips/include/asm/mach-lantiq/xway
++cflags-$(CONFIG_SOC_FALCON)	+= -I$(srctree)/arch/mips/include/asm/mach-lantiq/falcon
+diff --git a/arch/mips/lantiq/falcon/Makefile b/arch/mips/lantiq/falcon/Makefile
+new file mode 100644
+index 0000000..e9c7455
+--- /dev/null
++++ b/arch/mips/lantiq/falcon/Makefile
+@@ -0,0 +1 @@
++obj-y := clk.o prom.o reset.o sysctrl.o devices.o
+diff --git a/arch/mips/lantiq/falcon/clk.c b/arch/mips/lantiq/falcon/clk.c
+new file mode 100644
+index 0000000..afe1b52
+--- /dev/null
++++ b/arch/mips/lantiq/falcon/clk.c
+@@ -0,0 +1,44 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
++ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/ioport.h>
++#include <linux/export.h>
++
++#include <lantiq_soc.h>
++
++#include "devices.h"
++
++/* CPU0 Clock Control Register */
++#define LTQ_SYS1_CPU0CC		0x0040
++/* clock divider bit */
++#define LTQ_CPU0CC_CPUDIV	0x0001
++
++unsigned int
++ltq_get_io_region_clock(void)
++{
++	return CLOCK_200M;
++}
++EXPORT_SYMBOL(ltq_get_io_region_clock);
++
++unsigned int
++ltq_get_cpu_hz(void)
++{
++	if (ltq_sys1_r32(LTQ_SYS1_CPU0CC) & LTQ_CPU0CC_CPUDIV)
++		return CLOCK_200M;
++	else
++		return CLOCK_400M;
++}
++EXPORT_SYMBOL(ltq_get_cpu_hz);
++
++unsigned int
++ltq_get_fpi_hz(void)
++{
++	return CLOCK_100M;
++}
++EXPORT_SYMBOL(ltq_get_fpi_hz);
+diff --git a/arch/mips/lantiq/falcon/devices.c b/arch/mips/lantiq/falcon/devices.c
+new file mode 100644
+index 0000000..c4606f2
+--- /dev/null
++++ b/arch/mips/lantiq/falcon/devices.c
+@@ -0,0 +1,87 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
++ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/platform_device.h>
++#include <linux/mtd/nand.h>
++
++#include <lantiq_soc.h>
++
++#include "devices.h"
++
++/* nand flash */
++/* address lines used for NAND control signals */
++#define NAND_ADDR_ALE		0x10000
++#define NAND_ADDR_CLE		0x20000
++/* Ready/Busy Status */
++#define MODCON_STS		0x0002
++/* Ready/Busy Status Edge */
++#define MODCON_STSEDGE		0x0004
++
++static const char *part_probes[] = { "cmdlinepart", NULL };
++
++static int
++falcon_nand_ready(struct mtd_info *mtd)
++{
++	u32 modcon = ltq_ebu_r32(LTQ_EBU_MODCON);
++
++	return (((modcon & (MODCON_STS | MODCON_STSEDGE)) ==
++						(MODCON_STS | MODCON_STSEDGE)));
++}
++
++static void
++falcon_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
++{
++	struct nand_chip *this = mtd->priv;
++	unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
++
++	if (ctrl & NAND_CTRL_CHANGE) {
++		nandaddr &= ~(NAND_ADDR_ALE | NAND_ADDR_CLE);
++
++		if (ctrl & NAND_CLE)
++			nandaddr |= NAND_ADDR_CLE;
++		if (ctrl & NAND_ALE)
++			nandaddr |= NAND_ADDR_ALE;
++
++		this->IO_ADDR_W = (void __iomem *) nandaddr;
++	}
++
++	if (cmd != NAND_CMD_NONE)
++		writeb(cmd, this->IO_ADDR_W);
++}
++
++static struct platform_nand_data falcon_flash_nand_data = {
++	.chip = {
++		.nr_chips		= 1,
++		.chip_delay		= 25,
++		.part_probe_types	= part_probes,
++	},
++	.ctrl = {
++		.cmd_ctrl		= falcon_hwcontrol,
++		.dev_ready		= falcon_nand_ready,
++	}
++};
++
++static struct resource ltq_nand_res =
++	MEM_RES("nand", LTQ_FLASH_START, LTQ_FLASH_MAX);
++
++static struct platform_device ltq_flash_nand = {
++	.name		= "gen_nand",
++	.id		= -1,
++	.num_resources	= 1,
++	.resource	= &ltq_nand_res,
++	.dev		= {
++		.platform_data = &falcon_flash_nand_data,
++	},
++};
++
++void __init
++falcon_register_nand(void)
++{
++	platform_device_register(&ltq_flash_nand);
++}
+diff --git a/arch/mips/lantiq/falcon/devices.h b/arch/mips/lantiq/falcon/devices.h
+new file mode 100644
+index 0000000..e802a7c
+--- /dev/null
++++ b/arch/mips/lantiq/falcon/devices.h
+@@ -0,0 +1,18 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
++ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _FALCON_DEVICES_H__
++#define _FALCON_DEVICES_H__
++
++#include "../devices.h"
++
++extern void falcon_register_nand(void);
++
++#endif
+diff --git a/arch/mips/lantiq/falcon/prom.c b/arch/mips/lantiq/falcon/prom.c
+new file mode 100644
+index 0000000..b50d6f9
+--- /dev/null
++++ b/arch/mips/lantiq/falcon/prom.c
+@@ -0,0 +1,93 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
++ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
++ */
++
++#include <lantiq_soc.h>
++
++#include "devices.h"
++
++#include "../prom.h"
++
++#define SOC_FALCON		"Falcon"
++#define SOC_FALCON_D		"Falcon-D"
++#define SOC_FALCON_V		"Falcon-V"
++#define SOC_FALCON_M		"Falcon-M"
++
++#define PART_SHIFT	12
++#define PART_MASK	0x0FFFF000
++#define REV_SHIFT	28
++#define REV_MASK	0xF0000000
++#define SREV_SHIFT	22
++#define SREV_MASK	0x03C00000
++#define TYPE_SHIFT	26
++#define TYPE_MASK	0x3C000000
++
++#define MUXC_SIF_RX_PIN		112
++#define MUXC_SIF_TX_PIN		113
++
++/* this parameter allows us enable/disable asc1 via commandline */
++static int register_asc1;
++static int __init
++ltq_parse_asc1(char *p)
++{
++	register_asc1 = 1;
++	return 0;
++}
++__setup("use_asc1", ltq_parse_asc1);
++
++void __init
++ltq_soc_setup(void)
++{
++	ltq_register_asc(0);
++	ltq_register_wdt();
++	falcon_register_gpio();
++	if (register_asc1) {
++		ltq_register_asc(1);
++		if (ltq_gpio_request(MUXC_SIF_RX_PIN, 3, 0, "asc1-rx"))
++			pr_err("failed to request asc1-rx");
++		if (ltq_gpio_request(MUXC_SIF_TX_PIN, 3, 1, "asc1-tx"))
++			pr_err("failed to request asc1-tx");
++		ltq_sysctl_activate(SYSCTL_SYS1, ACTS_ASC1_ACT);
++	}
++}
++
++void __init
++ltq_soc_detect(struct ltq_soc_info *i)
++{
++	u32 type;
++	i->partnum = (ltq_r32(LTQ_FALCON_CHIPID) & PART_MASK) >> PART_SHIFT;
++	i->rev = (ltq_r32(LTQ_FALCON_CHIPID) & REV_MASK) >> REV_SHIFT;
++	i->srev = ((ltq_r32(LTQ_FALCON_CHIPCONF) & SREV_MASK) >> SREV_SHIFT);
++	sprintf(i->rev_type, "%c%d%d", (i->srev & 0x4) ? ('B') : ('A'),
++		i->rev & 0x7, (i->srev & 0x3) + 1);
++
++	switch (i->partnum) {
++	case SOC_ID_FALCON:
++		type = (ltq_r32(LTQ_FALCON_CHIPTYPE) & TYPE_MASK) >> TYPE_SHIFT;
++		switch (type) {
++		case 0:
++			i->name = SOC_FALCON_D;
++			break;
++		case 1:
++			i->name = SOC_FALCON_V;
++			break;
++		case 2:
++			i->name = SOC_FALCON_M;
++			break;
++		default:
++			i->name = SOC_FALCON;
++			break;
++		}
++		i->type = SOC_TYPE_FALCON;
++		break;
++
++	default:
++		unreachable();
++		break;
++	}
++}
+diff --git a/arch/mips/lantiq/falcon/reset.c b/arch/mips/lantiq/falcon/reset.c
+new file mode 100644
+index 0000000..cbcadc5
+--- /dev/null
++++ b/arch/mips/lantiq/falcon/reset.c
+@@ -0,0 +1,87 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
++ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/pm.h>
++#include <asm/reboot.h>
++#include <linux/export.h>
++
++#include <lantiq_soc.h>
++
++/* CPU0 Reset Source Register */
++#define LTQ_SYS1_CPU0RS		0x0040
++/* reset cause mask */
++#define LTQ_CPU0RS_MASK		0x0003
++
++int
++ltq_reset_cause(void)
++{
++	return ltq_sys1_r32(LTQ_SYS1_CPU0RS) & LTQ_CPU0RS_MASK;
++}
++EXPORT_SYMBOL_GPL(ltq_reset_cause);
++
++#define BOOT_REG_BASE	(KSEG1 | 0x1F200000)
++#define BOOT_PW1_REG	(BOOT_REG_BASE | 0x20)
++#define BOOT_PW2_REG	(BOOT_REG_BASE | 0x24)
++#define BOOT_PW1	0x4C545100
++#define BOOT_PW2	0x0051544C
++
++#define WDT_REG_BASE	(KSEG1 | 0x1F8803F0)
++#define WDT_PW1		0x00BE0000
++#define WDT_PW2		0x00DC0000
++
++static void
++ltq_machine_restart(char *command)
++{
++	pr_notice("System restart\n");
++	local_irq_disable();
++
++	/* reboot magic */
++	ltq_w32(BOOT_PW1, (void *)BOOT_PW1_REG); /* 'LTQ\0' */
++	ltq_w32(BOOT_PW2, (void *)BOOT_PW2_REG); /* '\0QTL' */
++	ltq_w32(0, (void *)BOOT_REG_BASE); /* reset Bootreg RVEC */
++
++	/* watchdog magic */
++	ltq_w32(WDT_PW1, (void *)WDT_REG_BASE);
++	ltq_w32(WDT_PW2 |
++		(0x3 << 26) | /* PWL */
++		(0x2 << 24) | /* CLKDIV */
++		(0x1 << 31) | /* enable */
++		(1), /* reload */
++		(void *)WDT_REG_BASE);
++	unreachable();
++}
++
++static void
++ltq_machine_halt(void)
++{
++	pr_notice("System halted.\n");
++	local_irq_disable();
++	unreachable();
++}
++
++static void
++ltq_machine_power_off(void)
++{
++	pr_notice("Please turn off the power now.\n");
++	local_irq_disable();
++	unreachable();
++}
++
++static int __init
++mips_reboot_setup(void)
++{
++	_machine_restart = ltq_machine_restart;
++	_machine_halt = ltq_machine_halt;
++	pm_power_off = ltq_machine_power_off;
++	return 0;
++}
++
++arch_initcall(mips_reboot_setup);
+diff --git a/arch/mips/lantiq/falcon/sysctrl.c b/arch/mips/lantiq/falcon/sysctrl.c
+new file mode 100644
+index 0000000..905a142
+--- /dev/null
++++ b/arch/mips/lantiq/falcon/sysctrl.c
+@@ -0,0 +1,183 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
++ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/ioport.h>
++#include <linux/export.h>
++#include <asm/delay.h>
++
++#include <lantiq_soc.h>
++
++#include "devices.h"
++
++/* infrastructure control register */
++#define SYS1_INFRAC		0x00bc
++/* Configuration fuses for drivers and pll */
++#define STATUS_CONFIG		0x0040
++
++/* GPE frequency selection */
++#define GPPC_OFFSET		24
++#define GPEFREQ_MASK		0x00000C0
++#define GPEFREQ_OFFSET		10
++/* Clock status register */
++#define LTQ_SYSCTL_CLKS		0x0000
++/* Clock enable register */
++#define LTQ_SYSCTL_CLKEN	0x0004
++/* Clock clear register */
++#define LTQ_SYSCTL_CLKCLR	0x0008
++/* Activation Status Register */
++#define LTQ_SYSCTL_ACTS		0x0020
++/* Activation Register */
++#define LTQ_SYSCTL_ACT		0x0024
++/* Deactivation Register */
++#define LTQ_SYSCTL_DEACT	0x0028
++/* reboot Register */
++#define LTQ_SYSCTL_RBT		0x002c
++
++static struct resource ltq_sysctl_res[] = {
++	MEM_RES("sys1", LTQ_SYS1_BASE_ADDR, LTQ_SYS1_SIZE),
++	MEM_RES("syseth", LTQ_SYS_ETH_BASE_ADDR, LTQ_SYS_ETH_SIZE),
++	MEM_RES("sysgpe", LTQ_SYS_GPE_BASE_ADDR, LTQ_SYS_GPE_SIZE),
++};
++
++static struct resource ltq_status_res =
++	MEM_RES("status", LTQ_STATUS_BASE_ADDR, LTQ_STATUS_SIZE);
++static struct resource ltq_ebu_res =
++	MEM_RES("ebu", LTQ_EBU_BASE_ADDR, LTQ_EBU_SIZE);
++
++static void __iomem *ltq_sysctl[3];
++static void __iomem *ltq_status_membase;
++void __iomem *ltq_sys1_membase;
++void __iomem *ltq_ebu_membase;
++
++#define ltq_reg_w32(m, x, y)	ltq_w32((x), ltq_sysctl[m] + (y))
++#define ltq_reg_r32(m, x)	ltq_r32(ltq_sysctl[m] + (x))
++#define ltq_reg_w32_mask(m, clear, set, reg)	\
++		ltq_reg_w32(m, (ltq_reg_r32(m, reg) & ~(clear)) | (set), reg)
++
++#define ltq_status_w32(x, y)	ltq_w32((x), ltq_status_membase + (y))
++#define ltq_status_r32(x)	ltq_r32(ltq_status_membase + (x))
++
++static inline void
++ltq_sysctl_wait(int module, unsigned int mask,
++		unsigned int test, unsigned int reg)
++{
++	int err = 1000000;
++
++	do {} while (--err && ((ltq_reg_r32(module, reg)
++					& mask) != test));
++	if (!err)
++		pr_err("module de/activation failed %d %08X %08X\n",
++							module, mask, test);
++}
++
++void
++ltq_sysctl_activate(int module, unsigned int mask)
++{
++	if (module > SYSCTL_SYSGPE)
++		return;
++
++	ltq_reg_w32(module, mask, LTQ_SYSCTL_CLKEN);
++	ltq_reg_w32(module, mask, LTQ_SYSCTL_ACT);
++	ltq_sysctl_wait(module, mask, mask, LTQ_SYSCTL_ACTS);
++}
++EXPORT_SYMBOL(ltq_sysctl_activate);
++
++void
++ltq_sysctl_deactivate(int module, unsigned int mask)
++{
++	if (module > SYSCTL_SYSGPE)
++		return;
++
++	ltq_reg_w32(module, mask, LTQ_SYSCTL_CLKCLR);
++	ltq_reg_w32(module, mask, LTQ_SYSCTL_DEACT);
++	ltq_sysctl_wait(module, mask, 0, LTQ_SYSCTL_ACTS);
++}
++EXPORT_SYMBOL(ltq_sysctl_deactivate);
++
++void
++ltq_sysctl_clken(int module, unsigned int mask)
++{
++	if (module > SYSCTL_SYSGPE)
++		return;
++
++	ltq_reg_w32(module, mask, LTQ_SYSCTL_CLKEN);
++	ltq_sysctl_wait(module, mask, mask, LTQ_SYSCTL_CLKS);
++}
++EXPORT_SYMBOL(ltq_sysctl_clken);
++
++void
++ltq_sysctl_clkdis(int module, unsigned int mask)
++{
++	if (module > SYSCTL_SYSGPE)
++		return;
++
++	ltq_reg_w32(module, mask, LTQ_SYSCTL_CLKCLR);
++	ltq_sysctl_wait(module, mask, 0, LTQ_SYSCTL_CLKS);
++}
++EXPORT_SYMBOL(ltq_sysctl_clkdis);
++
++void
++ltq_sysctl_reboot(int module, unsigned int mask)
++{
++	unsigned int act;
++
++	if (module > SYSCTL_SYSGPE)
++		return;
++
++	act = ltq_reg_r32(module, LTQ_SYSCTL_ACT);
++	if ((~act & mask) != 0)
++		ltq_sysctl_activate(module, ~act & mask);
++	ltq_reg_w32(module, act & mask, LTQ_SYSCTL_RBT);
++	ltq_sysctl_wait(module, mask, mask, LTQ_SYSCTL_ACTS);
++}
++EXPORT_SYMBOL(ltq_sysctl_reboot);
++
++/* enable the ONU core */
++static void
++ltq_gpe_enable(void)
++{
++	unsigned int freq;
++	unsigned int status;
++
++	/* if if the clock is already enabled */
++	status = ltq_reg_r32(SYSCTL_SYS1, SYS1_INFRAC);
++	if (status & (1 << (GPPC_OFFSET + 1)))
++		return;
++
++	if (ltq_status_r32(STATUS_CONFIG) == 0)
++		freq = 1; /* use 625MHz on unfused chip */
++	else
++		freq = (ltq_status_r32(STATUS_CONFIG) &
++			GPEFREQ_MASK) >>
++			GPEFREQ_OFFSET;
++
++	/* apply new frequency */
++	ltq_reg_w32_mask(SYSCTL_SYS1, 7 << (GPPC_OFFSET + 1),
++		freq << (GPPC_OFFSET + 2) , SYS1_INFRAC);
++	udelay(1);
++
++	/* enable new frequency */
++	ltq_reg_w32_mask(SYSCTL_SYS1, 0, 1 << (GPPC_OFFSET + 1), SYS1_INFRAC);
++	udelay(1);
++}
++
++void __init
++ltq_soc_init(void)
++{
++	int i;
++
++	for (i = 0; i < 3; i++)
++		ltq_sysctl[i] = ltq_remap_resource(&ltq_sysctl_res[i]);
++
++	ltq_sys1_membase = ltq_sysctl[0];
++	ltq_status_membase = ltq_remap_resource(&ltq_status_res);
++	ltq_ebu_membase = ltq_remap_resource(&ltq_ebu_res);
++
++	ltq_gpe_enable();
++}
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0006-MIPS-lantiq-add-support-for-FALC-ON-GPIOs.patch b/target/linux/lantiq/patches-3.3/0006-MIPS-lantiq-add-support-for-FALC-ON-GPIOs.patch
new file mode 100644
index 0000000000..3536496883
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0006-MIPS-lantiq-add-support-for-FALC-ON-GPIOs.patch
@@ -0,0 +1,501 @@
+From 92cd0e8b6247ac8c0db5cdc570543c6caa51b1ab Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 11 Aug 2011 14:35:02 +0200
+Subject: [PATCH 06/70] MIPS: lantiq: add support for FALC-ON GPIOs
+
+FALC-ON uses a different GPIO core than the other Lantiq SoCs. This patch adds
+the new driver.
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/lantiq/falcon/Makefile  |    2 +-
+ arch/mips/lantiq/falcon/devices.c |   41 ++++
+ arch/mips/lantiq/falcon/devices.h |    2 +
+ arch/mips/lantiq/falcon/gpio.c    |  399 +++++++++++++++++++++++++++++++++++++
+ 4 files changed, 443 insertions(+), 1 deletions(-)
+ create mode 100644 arch/mips/lantiq/falcon/gpio.c
+
+diff --git a/arch/mips/lantiq/falcon/Makefile b/arch/mips/lantiq/falcon/Makefile
+index e9c7455..de72209 100644
+--- a/arch/mips/lantiq/falcon/Makefile
++++ b/arch/mips/lantiq/falcon/Makefile
+@@ -1 +1 @@
+-obj-y := clk.o prom.o reset.o sysctrl.o devices.o
++obj-y := clk.o prom.o reset.o sysctrl.o devices.o gpio.o
+diff --git a/arch/mips/lantiq/falcon/devices.c b/arch/mips/lantiq/falcon/devices.c
+index c4606f2..4f47b44 100644
+--- a/arch/mips/lantiq/falcon/devices.c
++++ b/arch/mips/lantiq/falcon/devices.c
+@@ -9,6 +9,7 @@
+ 
+ #include <linux/platform_device.h>
+ #include <linux/mtd/nand.h>
++#include <linux/gpio.h>
+ 
+ #include <lantiq_soc.h>
+ 
+@@ -85,3 +86,43 @@ falcon_register_nand(void)
+ {
+ 	platform_device_register(&ltq_flash_nand);
+ }
++
++/* gpio */
++#define DECLARE_GPIO_RES(port) \
++static struct resource falcon_gpio ## port ## _res[] = { \
++	MEM_RES("gpio"#port, LTQ_GPIO ## port ## _BASE_ADDR, \
++		LTQ_GPIO ## port ## _SIZE), \
++	MEM_RES("padctrl"#port, LTQ_PADCTRL ## port ## _BASE_ADDR, \
++		LTQ_PADCTRL ## port ## _SIZE), \
++	IRQ_RES("gpio_mux"#port, FALCON_IRQ_GPIO_P ## port) \
++}
++DECLARE_GPIO_RES(0);
++DECLARE_GPIO_RES(1);
++DECLARE_GPIO_RES(2);
++DECLARE_GPIO_RES(3);
++DECLARE_GPIO_RES(4);
++
++void __init
++falcon_register_gpio(void)
++{
++	platform_device_register_simple("falcon_gpio", 0,
++		falcon_gpio0_res, ARRAY_SIZE(falcon_gpio0_res));
++	platform_device_register_simple("falcon_gpio", 1,
++		falcon_gpio1_res, ARRAY_SIZE(falcon_gpio1_res));
++	platform_device_register_simple("falcon_gpio", 2,
++		falcon_gpio2_res, ARRAY_SIZE(falcon_gpio2_res));
++	ltq_sysctl_activate(SYSCTL_SYS1, ACTS_PADCTRL1 | ACTS_P1);
++	ltq_sysctl_activate(SYSCTL_SYSETH, ACTS_PADCTRL0 |
++		ACTS_PADCTRL2 | ACTS_P0 | ACTS_P2);
++}
++
++void __init
++falcon_register_gpio_extra(void)
++{
++	platform_device_register_simple("falcon_gpio", 3,
++		falcon_gpio3_res, ARRAY_SIZE(falcon_gpio3_res));
++	platform_device_register_simple("falcon_gpio", 4,
++		falcon_gpio4_res, ARRAY_SIZE(falcon_gpio4_res));
++	ltq_sysctl_activate(SYSCTL_SYS1,
++		ACTS_PADCTRL3 | ACTS_PADCTRL4 | ACTS_P3 | ACTS_P4);
++}
+diff --git a/arch/mips/lantiq/falcon/devices.h b/arch/mips/lantiq/falcon/devices.h
+index e802a7c..18be8b6 100644
+--- a/arch/mips/lantiq/falcon/devices.h
++++ b/arch/mips/lantiq/falcon/devices.h
+@@ -14,5 +14,7 @@
+ #include "../devices.h"
+ 
+ extern void falcon_register_nand(void);
++extern void falcon_register_gpio(void);
++extern void falcon_register_gpio_extra(void);
+ 
+ #endif
+diff --git a/arch/mips/lantiq/falcon/gpio.c b/arch/mips/lantiq/falcon/gpio.c
+new file mode 100644
+index 0000000..28f8639
+--- /dev/null
++++ b/arch/mips/lantiq/falcon/gpio.c
+@@ -0,0 +1,399 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
++ *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/gpio.h>
++#include <linux/interrupt.h>
++#include <linux/slab.h>
++#include <linux/export.h>
++#include <linux/platform_device.h>
++
++#include <lantiq_soc.h>
++
++/* Multiplexer Control Register */
++#define LTQ_PADC_MUX(x)         (x * 0x4)
++/* Pad Control Availability Register */
++#define LTQ_PADC_AVAIL          0x000000F0
++
++/* Data Output Register */
++#define LTQ_GPIO_OUT            0x00000000
++/* Data Input Register */
++#define LTQ_GPIO_IN             0x00000004
++/* Direction Register */
++#define LTQ_GPIO_DIR            0x00000008
++/* External Interrupt Control Register 0 */
++#define LTQ_GPIO_EXINTCR0       0x00000018
++/* External Interrupt Control Register 1 */
++#define LTQ_GPIO_EXINTCR1       0x0000001C
++/* IRN Capture Register */
++#define LTQ_GPIO_IRNCR          0x00000020
++/* IRN Interrupt Configuration Register */
++#define LTQ_GPIO_IRNCFG		0x0000002C
++/* IRN Interrupt Enable Set Register */
++#define LTQ_GPIO_IRNRNSET       0x00000030
++/* IRN Interrupt Enable Clear Register */
++#define LTQ_GPIO_IRNENCLR       0x00000034
++/* Output Set Register */
++#define LTQ_GPIO_OUTSET         0x00000040
++/* Output Cler Register */
++#define LTQ_GPIO_OUTCLR         0x00000044
++/* Direction Clear Register */
++#define LTQ_GPIO_DIRSET         0x00000048
++/* Direction Set Register */
++#define LTQ_GPIO_DIRCLR         0x0000004C
++
++/* turn a gpio_chip into a falcon_gpio_port */
++#define ctop(c)		container_of(c, struct falcon_gpio_port, gpio_chip)
++/* turn a irq_data into a falcon_gpio_port */
++#define itop(i)		((struct falcon_gpio_port *) irq_get_chip_data(i->irq))
++
++#define ltq_pad_r32(p, reg)		ltq_r32(p->pad + reg)
++#define ltq_pad_w32(p, val, reg)	ltq_w32(val, p->pad + reg)
++#define ltq_pad_w32_mask(c, clear, set, reg) \
++		ltq_pad_w32(c, (ltq_pad_r32(c, reg) & ~(clear)) | (set), reg)
++
++#define ltq_port_r32(p, reg)		ltq_r32(p->port + reg)
++#define ltq_port_w32(p, val, reg)	ltq_w32(val, p->port + reg)
++#define ltq_port_w32_mask(p, clear, set, reg) \
++		ltq_port_w32(p, (ltq_port_r32(p, reg) & ~(clear)) | (set), reg)
++
++#define MAX_PORTS		5
++#define PINS_PER_PORT		32
++
++struct falcon_gpio_port {
++	struct gpio_chip gpio_chip;
++	void __iomem *pad;
++	void __iomem *port;
++	unsigned int irq_base;
++	unsigned int chained_irq;
++};
++
++static struct falcon_gpio_port ltq_gpio_port[MAX_PORTS];
++
++int gpio_to_irq(unsigned int gpio)
++{
++	return __gpio_to_irq(gpio);
++}
++EXPORT_SYMBOL(gpio_to_irq);
++
++int ltq_gpio_mux_set(unsigned int pin, unsigned int mux)
++{
++	int port = pin / 100;
++	int offset = pin % 100;
++	struct falcon_gpio_port *gpio_port;
++
++	if ((offset >= PINS_PER_PORT) || (port >= MAX_PORTS))
++		return -EINVAL;
++
++	gpio_port = &ltq_gpio_port[port];
++	ltq_pad_w32(gpio_port, mux & 0x3, LTQ_PADC_MUX(offset));
++
++	return 0;
++}
++EXPORT_SYMBOL(ltq_gpio_mux_set);
++
++int ltq_gpio_request(unsigned int pin, unsigned int mux,
++			unsigned int dir, const char *name)
++{
++	int port = pin / 100;
++	int offset = pin % 100;
++
++	if (offset >= PINS_PER_PORT || port >= MAX_PORTS)
++		return -EINVAL;
++
++	if (gpio_request(pin, name)) {
++		pr_err("failed to setup lantiq gpio: %s\n", name);
++		return -EBUSY;
++	}
++
++	if (dir)
++		gpio_direction_output(pin, 1);
++	else
++		gpio_direction_input(pin);
++
++	return ltq_gpio_mux_set(pin, mux);
++}
++EXPORT_SYMBOL(ltq_gpio_request);
++
++static int
++falcon_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
++{
++	ltq_port_w32(ctop(chip), 1 << offset, LTQ_GPIO_DIRCLR);
++
++	return 0;
++}
++
++static void
++falcon_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
++{
++	if (value)
++		ltq_port_w32(ctop(chip), 1 << offset, LTQ_GPIO_OUTSET);
++	else
++		ltq_port_w32(ctop(chip), 1 << offset, LTQ_GPIO_OUTCLR);
++}
++
++static int
++falcon_gpio_direction_output(struct gpio_chip *chip,
++			unsigned int offset, int value)
++{
++	falcon_gpio_set(chip, offset, value);
++	ltq_port_w32(ctop(chip), 1 << offset, LTQ_GPIO_DIRSET);
++
++	return 0;
++}
++
++static int
++falcon_gpio_get(struct gpio_chip *chip, unsigned int offset)
++{
++	if ((ltq_port_r32(ctop(chip), LTQ_GPIO_DIR) >> offset) & 1)
++		return (ltq_port_r32(ctop(chip), LTQ_GPIO_OUT) >> offset) & 1;
++	else
++		return (ltq_port_r32(ctop(chip), LTQ_GPIO_IN) >> offset) & 1;
++}
++
++static int
++falcon_gpio_request(struct gpio_chip *chip, unsigned offset)
++{
++	if ((ltq_pad_r32(ctop(chip), LTQ_PADC_AVAIL) >> offset) & 1) {
++		if (ltq_pad_r32(ctop(chip), LTQ_PADC_MUX(offset)) > 1)
++			return -EBUSY;
++		/* switch on gpio function */
++		ltq_pad_w32(ctop(chip), 1, LTQ_PADC_MUX(offset));
++		return 0;
++	}
++
++	return -ENODEV;
++}
++
++static void
++falcon_gpio_free(struct gpio_chip *chip, unsigned offset)
++{
++	if ((ltq_pad_r32(ctop(chip), LTQ_PADC_AVAIL) >> offset) & 1) {
++		if (ltq_pad_r32(ctop(chip), LTQ_PADC_MUX(offset)) > 1)
++			return;
++		/* switch off gpio function */
++		ltq_pad_w32(ctop(chip), 0, LTQ_PADC_MUX(offset));
++	}
++}
++
++static int
++falcon_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
++{
++	return ctop(chip)->irq_base + offset;
++}
++
++static void
++falcon_gpio_disable_irq(struct irq_data *d)
++{
++	unsigned int offset = d->irq - itop(d)->irq_base;
++
++	ltq_port_w32(itop(d), 1 << offset, LTQ_GPIO_IRNENCLR);
++}
++
++static void
++falcon_gpio_enable_irq(struct irq_data *d)
++{
++	unsigned int offset = d->irq - itop(d)->irq_base;
++
++	if (!ltq_pad_r32(itop(d), LTQ_PADC_MUX(offset)) < 1)
++		/* switch on gpio function */
++		ltq_pad_w32(itop(d), 1, LTQ_PADC_MUX(offset));
++
++	ltq_port_w32(itop(d), 1 << offset, LTQ_GPIO_IRNRNSET);
++}
++
++static void
++falcon_gpio_ack_irq(struct irq_data *d)
++{
++	unsigned int offset = d->irq - itop(d)->irq_base;
++
++	ltq_port_w32(itop(d), 1 << offset, LTQ_GPIO_IRNCR);
++}
++
++static void
++falcon_gpio_mask_and_ack_irq(struct irq_data *d)
++{
++	unsigned int offset = d->irq - itop(d)->irq_base;
++
++	ltq_port_w32(itop(d), 1 << offset, LTQ_GPIO_IRNENCLR);
++	ltq_port_w32(itop(d), 1 << offset, LTQ_GPIO_IRNCR);
++}
++
++static struct irq_chip falcon_gpio_irq_chip;
++static int
++falcon_gpio_irq_type(struct irq_data *d, unsigned int type)
++{
++	unsigned int offset = d->irq - itop(d)->irq_base;
++	unsigned int mask = 1 << offset;
++
++	if ((type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_NONE)
++		return 0;
++
++	if ((type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) != 0) {
++		/* level triggered */
++		ltq_port_w32_mask(itop(d), 0, mask, LTQ_GPIO_IRNCFG);
++		irq_set_chip_and_handler_name(d->irq,
++				&falcon_gpio_irq_chip, handle_level_irq, "mux");
++	} else {
++		/* edge triggered */
++		ltq_port_w32_mask(itop(d), mask, 0, LTQ_GPIO_IRNCFG);
++		irq_set_chip_and_handler_name(d->irq,
++			&falcon_gpio_irq_chip, handle_simple_irq, "mux");
++	}
++
++	if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
++		ltq_port_w32_mask(itop(d), mask, 0, LTQ_GPIO_EXINTCR0);
++		ltq_port_w32_mask(itop(d), 0, mask, LTQ_GPIO_EXINTCR1);
++	} else {
++		if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_HIGH)) != 0)
++			/* positive logic: rising edge, high level */
++			ltq_port_w32_mask(itop(d), mask, 0, LTQ_GPIO_EXINTCR0);
++		else
++			/* negative logic: falling edge, low level */
++			ltq_port_w32_mask(itop(d), 0, mask, LTQ_GPIO_EXINTCR0);
++		ltq_port_w32_mask(itop(d), mask, 0, LTQ_GPIO_EXINTCR1);
++	}
++
++	return gpio_direction_input(itop(d)->gpio_chip.base + offset);
++}
++
++static void
++falcon_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
++{
++	struct falcon_gpio_port *gpio_port = irq_desc_get_handler_data(desc);
++	unsigned long irncr;
++	int offset;
++
++	/* acknowledge interrupt */
++	irncr = ltq_port_r32(gpio_port, LTQ_GPIO_IRNCR);
++	ltq_port_w32(gpio_port, irncr, LTQ_GPIO_IRNCR);
++
++	desc->irq_data.chip->irq_ack(&desc->irq_data);
++
++	for_each_set_bit(offset, &irncr, gpio_port->gpio_chip.ngpio)
++		generic_handle_irq(gpio_port->irq_base + offset);
++}
++
++static struct irq_chip falcon_gpio_irq_chip = {
++	.name = "gpio_irq_mux",
++	.irq_mask = falcon_gpio_disable_irq,
++	.irq_unmask = falcon_gpio_enable_irq,
++	.irq_ack = falcon_gpio_ack_irq,
++	.irq_mask_ack = falcon_gpio_mask_and_ack_irq,
++	.irq_set_type = falcon_gpio_irq_type,
++};
++
++static struct irqaction gpio_cascade = {
++	.handler = no_action,
++	.flags = IRQF_DISABLED,
++	.name = "gpio_cascade",
++};
++
++static int
++falcon_gpio_probe(struct platform_device *pdev)
++{
++	struct falcon_gpio_port *gpio_port;
++	int ret, i;
++	struct resource *gpiores, *padres;
++	int irq;
++
++	if (pdev->id >= MAX_PORTS)
++		return -ENODEV;
++
++	gpiores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	padres = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++	irq = platform_get_irq(pdev, 0);
++	if (!gpiores || !padres)
++		return -ENODEV;
++
++	gpio_port = &ltq_gpio_port[pdev->id];
++	gpio_port->gpio_chip.label = "falcon-gpio";
++	gpio_port->gpio_chip.direction_input = falcon_gpio_direction_input;
++	gpio_port->gpio_chip.direction_output = falcon_gpio_direction_output;
++	gpio_port->gpio_chip.get = falcon_gpio_get;
++	gpio_port->gpio_chip.set = falcon_gpio_set;
++	gpio_port->gpio_chip.request = falcon_gpio_request;
++	gpio_port->gpio_chip.free = falcon_gpio_free;
++	gpio_port->gpio_chip.base = 100 * pdev->id;
++	gpio_port->gpio_chip.ngpio = 32;
++	gpio_port->gpio_chip.dev = &pdev->dev;
++
++	gpio_port->port = ltq_remap_resource(gpiores);
++	gpio_port->pad = ltq_remap_resource(padres);
++
++	if (!gpio_port->port || !gpio_port->pad) {
++		dev_err(&pdev->dev, "Could not map io ranges\n");
++		ret = -ENOMEM;
++		goto err;
++	}
++
++	if (irq > 0) {
++		/* irq_chip support */
++		gpio_port->gpio_chip.to_irq = falcon_gpio_to_irq;
++		gpio_port->irq_base = INT_NUM_EXTRA_START + (32 * pdev->id);
++
++		for (i = 0; i < 32; i++) {
++			irq_set_chip_and_handler_name(gpio_port->irq_base + i,
++				&falcon_gpio_irq_chip, handle_simple_irq,
++				"mux");
++			irq_set_chip_data(gpio_port->irq_base + i, gpio_port);
++			/* set to negative logic (falling edge, low level) */
++			ltq_port_w32_mask(gpio_port, 0, 1 << i,
++				LTQ_GPIO_EXINTCR0);
++		}
++
++		gpio_port->chained_irq = irq;
++		setup_irq(irq, &gpio_cascade);
++		irq_set_handler_data(irq, gpio_port);
++		irq_set_chained_handler(irq, falcon_gpio_irq_handler);
++	}
++
++	ret = gpiochip_add(&gpio_port->gpio_chip);
++	if (ret < 0) {
++		dev_err(&pdev->dev, "Could not register gpiochip %d, %d\n",
++			pdev->id, ret);
++		goto err;
++	}
++	platform_set_drvdata(pdev, gpio_port);
++	return ret;
++
++err:
++	dev_err(&pdev->dev, "Error in gpio_probe %d, %d\n", pdev->id, ret);
++	if (gpiores)
++		release_resource(gpiores);
++	if (padres)
++		release_resource(padres);
++
++	if (gpio_port->port)
++		iounmap(gpio_port->port);
++	if (gpio_port->pad)
++		iounmap(gpio_port->pad);
++	return ret;
++}
++
++static struct platform_driver falcon_gpio_driver = {
++	.probe = falcon_gpio_probe,
++	.driver = {
++		.name = "falcon_gpio",
++		.owner = THIS_MODULE,
++	},
++};
++
++int __init
++falcon_gpio_init(void)
++{
++	int ret;
++
++	pr_info("FALC(tm) ON GPIO Driver, (C) 2011 Lantiq Deutschland Gmbh\n");
++	ret = platform_driver_register(&falcon_gpio_driver);
++	if (ret)
++		pr_err("falcon_gpio: Error registering platform driver!");
++	return ret;
++}
++
++postcore_initcall(falcon_gpio_init);
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0007-MIPS-lantiq-add-support-for-the-EASY98000-evaluation.patch b/target/linux/lantiq/patches-3.3/0007-MIPS-lantiq-add-support-for-the-EASY98000-evaluation.patch
new file mode 100644
index 0000000000..71904dfa75
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0007-MIPS-lantiq-add-support-for-the-EASY98000-evaluation.patch
@@ -0,0 +1,178 @@
+From fd86db6e998953a8574cfc2f1112343f9cddaccf Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 11 Aug 2011 14:09:35 +0200
+Subject: [PATCH 07/70] MIPS: lantiq: add support for the EASY98000 evaluation
+ board
+
+This patch adds the machine code for the EASY9800 evaluation board.
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/lantiq/falcon/Kconfig          |   11 +++
+ arch/mips/lantiq/falcon/Makefile         |    1 +
+ arch/mips/lantiq/falcon/mach-easy98000.c |  110 ++++++++++++++++++++++++++++++
+ arch/mips/lantiq/machtypes.h             |    5 ++
+ 4 files changed, 127 insertions(+), 0 deletions(-)
+ create mode 100644 arch/mips/lantiq/falcon/Kconfig
+ create mode 100644 arch/mips/lantiq/falcon/mach-easy98000.c
+
+diff --git a/arch/mips/lantiq/falcon/Kconfig b/arch/mips/lantiq/falcon/Kconfig
+new file mode 100644
+index 0000000..03e999d
+--- /dev/null
++++ b/arch/mips/lantiq/falcon/Kconfig
+@@ -0,0 +1,11 @@
++if SOC_FALCON
++
++menu "MIPS Machine"
++
++config LANTIQ_MACH_EASY98000
++	bool "Easy98000"
++	default y
++
++endmenu
++
++endif
+diff --git a/arch/mips/lantiq/falcon/Makefile b/arch/mips/lantiq/falcon/Makefile
+index de72209..56b22eb 100644
+--- a/arch/mips/lantiq/falcon/Makefile
++++ b/arch/mips/lantiq/falcon/Makefile
+@@ -1 +1,2 @@
+ obj-y := clk.o prom.o reset.o sysctrl.o devices.o gpio.o
++obj-$(CONFIG_LANTIQ_MACH_EASY98000) += mach-easy98000.o
+diff --git a/arch/mips/lantiq/falcon/mach-easy98000.c b/arch/mips/lantiq/falcon/mach-easy98000.c
+new file mode 100644
+index 0000000..361b8f0
+--- /dev/null
++++ b/arch/mips/lantiq/falcon/mach-easy98000.c
+@@ -0,0 +1,110 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
++ *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/platform_device.h>
++#include <linux/mtd/partitions.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_gpio.h>
++#include <linux/spi/eeprom.h>
++
++#include "../machtypes.h"
++
++#include "devices.h"
++
++static struct mtd_partition easy98000_nor_partitions[] = {
++	{
++		.name	= "uboot",
++		.offset	= 0x0,
++		.size	= 0x40000,
++	},
++	{
++		.name	= "uboot_env",
++		.offset	= 0x40000,
++		.size	= 0x40000,	/* 2 sectors for redundant env. */
++	},
++	{
++		.name	= "linux",
++		.offset	= 0x80000,
++		.size	= 0xF80000,	/* map only 16 MiB */
++	},
++};
++
++struct physmap_flash_data easy98000_nor_flash_data = {
++	.nr_parts	= ARRAY_SIZE(easy98000_nor_partitions),
++	.parts		= easy98000_nor_partitions,
++};
++
++/* setup gpio based spi bus/device for access to the eeprom on the board */
++#define SPI_GPIO_MRST		102
++#define SPI_GPIO_MTSR		103
++#define SPI_GPIO_CLK		104
++#define SPI_GPIO_CS0		105
++#define SPI_GPIO_CS1		106
++#define SPI_GPIO_BUS_NUM	1
++
++static struct spi_gpio_platform_data easy98000_spi_gpio_data = {
++	.sck		= SPI_GPIO_CLK,
++	.mosi		= SPI_GPIO_MTSR,
++	.miso		= SPI_GPIO_MRST,
++	.num_chipselect	= 2,
++};
++
++static struct platform_device easy98000_spi_gpio_device = {
++	.name			= "spi_gpio",
++	.id			= SPI_GPIO_BUS_NUM,
++	.dev.platform_data	= &easy98000_spi_gpio_data,
++};
++
++static struct spi_eeprom at25160n = {
++	.byte_len	= 16 * 1024 / 8,
++	.name		= "at25160n",
++	.page_size	= 32,
++	.flags		= EE_ADDR2,
++};
++
++static struct spi_board_info easy98000_spi_gpio_devices __initdata = {
++	.modalias		= "at25",
++	.bus_num		= SPI_GPIO_BUS_NUM,
++	.max_speed_hz		= 1000 * 1000,
++	.mode			= SPI_MODE_3,
++	.chip_select		= 1,
++	.controller_data	= (void *) SPI_GPIO_CS1,
++	.platform_data		= &at25160n,
++};
++
++static void __init
++easy98000_init_common(void)
++{
++	spi_register_board_info(&easy98000_spi_gpio_devices, 1);
++	platform_device_register(&easy98000_spi_gpio_device);
++}
++
++static void __init
++easy98000_init(void)
++{
++	easy98000_init_common();
++	ltq_register_nor(&easy98000_nor_flash_data);
++}
++
++static void __init
++easy98000nand_init(void)
++{
++	easy98000_init_common();
++	falcon_register_nand();
++}
++
++MIPS_MACHINE(LANTIQ_MACH_EASY98000,
++			"EASY98000",
++			"EASY98000 Eval Board",
++			easy98000_init);
++
++MIPS_MACHINE(LANTIQ_MACH_EASY98000NAND,
++			"EASY98000NAND",
++			"EASY98000 Eval Board (NAND Flash)",
++			easy98000nand_init);
+diff --git a/arch/mips/lantiq/machtypes.h b/arch/mips/lantiq/machtypes.h
+index 7e01b8c..dfc6af7 100644
+--- a/arch/mips/lantiq/machtypes.h
++++ b/arch/mips/lantiq/machtypes.h
+@@ -15,6 +15,11 @@ enum lantiq_mach_type {
+ 	LTQ_MACH_GENERIC = 0,
+ 	LTQ_MACH_EASY50712,	/* Danube evaluation board */
+ 	LTQ_MACH_EASY50601,	/* Amazon SE evaluation board */
++
++	/* FALCON */
++	LANTIQ_MACH_EASY98000,		/* Falcon Eval Board, NOR Flash */
++	LANTIQ_MACH_EASY98000SF,	/* Falcon Eval Board, Serial Flash */
++	LANTIQ_MACH_EASY98000NAND,	/* Falcon Eval Board, NAND Flash */
+ };
+ 
+ #endif
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0008-MIPS-lantiq-fix-early-printk.patch b/target/linux/lantiq/patches-3.3/0008-MIPS-lantiq-fix-early-printk.patch
new file mode 100644
index 0000000000..e994dc5f8c
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0008-MIPS-lantiq-fix-early-printk.patch
@@ -0,0 +1,68 @@
+From 4e06715641d992bb9d94e0b37d22241b9ec074c6 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 20 Aug 2011 18:55:13 +0200
+Subject: [PATCH 08/70] MIPS: lantiq: fix early printk
+
+The code was using a 32bit write operations in the early_printk code. This
+resulted in 3 zero bytes also being written to the serial port. This patch
+changes the memory access to 8bit.
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h |    6 ++++++
+ arch/mips/lantiq/early_printk.c                    |   14 ++++++++------
+ 2 files changed, 14 insertions(+), 6 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index 87f6d24..e31f52d 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -34,6 +34,12 @@
+ #define LTQ_ASC1_BASE_ADDR	0x1E100C00
+ #define LTQ_ASC_SIZE		0x400
+ 
++/*
++ * during early_printk no ioremap is possible
++ * lets use KSEG1 instead
++ */
++#define LTQ_EARLY_ASC		KSEG1ADDR(LTQ_ASC1_BASE_ADDR)
++
+ /* RCU - reset control unit */
+ #define LTQ_RCU_BASE_ADDR	0x1F203000
+ #define LTQ_RCU_SIZE		0x1000
+diff --git a/arch/mips/lantiq/early_printk.c b/arch/mips/lantiq/early_printk.c
+index 972e05f..5089075 100644
+--- a/arch/mips/lantiq/early_printk.c
++++ b/arch/mips/lantiq/early_printk.c
+@@ -12,11 +12,13 @@
+ #include <lantiq.h>
+ #include <lantiq_soc.h>
+ 
+-/* no ioremap possible at this early stage, lets use KSEG1 instead  */
+-#define LTQ_ASC_BASE	KSEG1ADDR(LTQ_ASC1_BASE_ADDR)
+ #define ASC_BUF		1024
+-#define LTQ_ASC_FSTAT	((u32 *)(LTQ_ASC_BASE + 0x0048))
+-#define LTQ_ASC_TBUF	((u32 *)(LTQ_ASC_BASE + 0x0020))
++#define LTQ_ASC_FSTAT	((u32 *)(LTQ_EARLY_ASC + 0x0048))
++#ifdef __BIG_ENDIAN
++#define LTQ_ASC_TBUF	((u32 *)(LTQ_EARLY_ASC + 0x0020 + 3))
++#else
++#define LTQ_ASC_TBUF	((u32 *)(LTQ_EARLY_ASC + 0x0020))
++#endif
+ #define TXMASK		0x3F00
+ #define TXOFFSET	8
+ 
+@@ -27,7 +29,7 @@ void prom_putchar(char c)
+ 	local_irq_save(flags);
+ 	do { } while ((ltq_r32(LTQ_ASC_FSTAT) & TXMASK) >> TXOFFSET);
+ 	if (c == '\n')
+-		ltq_w32('\r', LTQ_ASC_TBUF);
+-	ltq_w32(c, LTQ_ASC_TBUF);
++		ltq_w8('\r', LTQ_ASC_TBUF);
++	ltq_w8(c, LTQ_ASC_TBUF);
+ 	local_irq_restore(flags);
+ }
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0009-MIPS-lantiq-fix-cmdline-parsing.patch b/target/linux/lantiq/patches-3.3/0009-MIPS-lantiq-fix-cmdline-parsing.patch
new file mode 100644
index 0000000000..261b8e22ec
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0009-MIPS-lantiq-fix-cmdline-parsing.patch
@@ -0,0 +1,36 @@
+From 3ea88c1089b88b4860919a9cdea0cc5da4d09e2c Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 12 Aug 2011 16:27:38 +0200
+Subject: [PATCH 09/70] MIPS: lantiq: fix cmdline parsing
+
+The code tested if the KSEG1 mapped address of argv was != 0. We need to use
+CPHYSADDR instead to make the conditional actually work.
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/lantiq/prom.c |    6 ++++--
+ 1 files changed, 4 insertions(+), 2 deletions(-)
+
+diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
+index e3b1e25..acb8921 100644
+--- a/arch/mips/lantiq/prom.c
++++ b/arch/mips/lantiq/prom.c
+@@ -49,10 +49,12 @@ static void __init prom_init_cmdline(void)
+ 	char **argv = (char **) KSEG1ADDR(fw_arg1);
+ 	int i;
+ 
++	arcs_cmdline[0] = '\0';
++
+ 	for (i = 0; i < argc; i++) {
+-		char *p = (char *)  KSEG1ADDR(argv[i]);
++		char *p = (char *) KSEG1ADDR(argv[i]);
+ 
+-		if (p && *p) {
++		if (CPHYSADDR(p) && *p) {
+ 			strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
+ 			strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
+ 		}
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0010-MIPS-lantiq-fix-STP-gpio-groups.patch b/target/linux/lantiq/patches-3.3/0010-MIPS-lantiq-fix-STP-gpio-groups.patch
new file mode 100644
index 0000000000..f3c76a0d6b
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0010-MIPS-lantiq-fix-STP-gpio-groups.patch
@@ -0,0 +1,42 @@
+From 8da3264153de296b0d378befd4eb711f20d7843c Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 27 Oct 2011 20:06:05 +0200
+Subject: [PATCH 10/70] MIPS: lantiq: fix STP gpio groups
+
+The STP engine has 3 groups of 8 pins. Only the first was activated by default.
+This patch activates the 2 missing groups.
+
+Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/lantiq/xway/gpio_stp.c |    7 +++++--
+ 1 files changed, 5 insertions(+), 2 deletions(-)
+
+diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c
+index 2c78660..cb6f170 100644
+--- a/arch/mips/lantiq/xway/gpio_stp.c
++++ b/arch/mips/lantiq/xway/gpio_stp.c
+@@ -35,6 +35,8 @@
+ #define LTQ_STP_ADSL_SRC	(3 << 24)
+ 
+ #define LTQ_STP_GROUP0		(1 << 0)
++#define LTQ_STP_GROUP1		(1 << 1)
++#define LTQ_STP_GROUP2		(1 << 2)
+ 
+ #define LTQ_STP_RISING		0
+ #define LTQ_STP_FALLING		(1 << 26)
+@@ -93,8 +95,9 @@ static int ltq_stp_hw_init(void)
+ 	/* rising or falling edge */
+ 	ltq_stp_w32_mask(LTQ_STP_EDGE_MASK, LTQ_STP_FALLING, LTQ_STP_CON0);
+ 
+-	/* per default stp 15-0 are set */
+-	ltq_stp_w32_mask(0, LTQ_STP_GROUP0, LTQ_STP_CON1);
++	/* enable all three led groups */
++	ltq_stp_w32_mask(0, LTQ_STP_GROUP0 | LTQ_STP_GROUP1 | LTQ_STP_GROUP2,
++		LTQ_STP_CON1);
+ 
+ 	/* stp are update periodically by the FPI bus */
+ 	ltq_stp_w32_mask(LTQ_STP_UPD_MASK, LTQ_STP_UPD_FPI, LTQ_STP_CON1);
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0011-MIPS-lantiq-fix-pull-gpio-up-resistors-usage.patch b/target/linux/lantiq/patches-3.3/0011-MIPS-lantiq-fix-pull-gpio-up-resistors-usage.patch
new file mode 100644
index 0000000000..c89134df87
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0011-MIPS-lantiq-fix-pull-gpio-up-resistors-usage.patch
@@ -0,0 +1,48 @@
+From 784e85cf7ce5032c9e5de35505fcc209f2a7891e Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 27 Oct 2011 20:06:30 +0200
+Subject: [PATCH 11/70] MIPS: lantiq: fix pull gpio up resistors usage
+
+The register that enables a gpios internal pullups was not used. This patch
+makes sure the pullups are activated correctly.
+
+Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/lantiq/xway/gpio.c |    6 ++++++
+ 1 files changed, 6 insertions(+), 0 deletions(-)
+
+diff --git a/arch/mips/lantiq/xway/gpio.c b/arch/mips/lantiq/xway/gpio.c
+index f204f6c..14ff7c7 100644
+--- a/arch/mips/lantiq/xway/gpio.c
++++ b/arch/mips/lantiq/xway/gpio.c
+@@ -21,6 +21,8 @@
+ #define LTQ_GPIO_ALTSEL0	0x0C
+ #define LTQ_GPIO_ALTSEL1	0x10
+ #define LTQ_GPIO_OD		0x14
++#define LTQ_GPIO_PUDSEL		0x1C
++#define LTQ_GPIO_PUDEN		0x20
+ 
+ #define PINS_PER_PORT		16
+ #define MAX_PORTS		3
+@@ -106,6 +108,8 @@ static int ltq_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
+ 
+ 	ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
+ 	ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset);
++	ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_PUDSEL, offset);
++	ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_PUDEN, offset);
+ 
+ 	return 0;
+ }
+@@ -117,6 +121,8 @@ static int ltq_gpio_direction_output(struct gpio_chip *chip,
+ 
+ 	ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
+ 	ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset);
++	ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_PUDSEL, offset);
++	ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_PUDEN, offset);
+ 	ltq_gpio_set(chip, offset, value);
+ 
+ 	return 0;
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0012-MIPS-lantiq-add-default-configs.patch b/target/linux/lantiq/patches-3.3/0012-MIPS-lantiq-add-default-configs.patch
new file mode 100644
index 0000000000..286eb7c2b9
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0012-MIPS-lantiq-add-default-configs.patch
@@ -0,0 +1,247 @@
+From fe45fbd99c5b5815a08eccb81ef7fa16d60517cc Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 11 Nov 2011 22:02:27 +0100
+Subject: [PATCH 12/70] MIPS: lantiq: add default configs
+
+This patch adds the default config for 3 Lantiq SoCs
+
+* Danube/AR9 (xway)
+* Amazon-SE
+* Falc-ON
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/configs/ase_defconfig    |   67 +++++++++++++++++++++++++++++++++
+ arch/mips/configs/falcon_defconfig |   72 ++++++++++++++++++++++++++++++++++++
+ arch/mips/configs/xway_defconfig   |   66 +++++++++++++++++++++++++++++++++
+ 3 files changed, 205 insertions(+), 0 deletions(-)
+ create mode 100644 arch/mips/configs/ase_defconfig
+ create mode 100644 arch/mips/configs/falcon_defconfig
+ create mode 100644 arch/mips/configs/xway_defconfig
+
+diff --git a/arch/mips/configs/ase_defconfig b/arch/mips/configs/ase_defconfig
+new file mode 100644
+index 0000000..5bb1d93
+--- /dev/null
++++ b/arch/mips/configs/ase_defconfig
+@@ -0,0 +1,67 @@
++CONFIG_LANTIQ=y
++CONFIG_SOC_AMAZON_SE=y
++CONFIG_CPU_MIPS32_R2=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_EXPERIMENTAL=y
++CONFIG_DEFAULT_HOSTNAME="amazon_se"
++CONFIG_SYSVIPC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE="../root-lantiq/ ../root-lantiq/initramfs-base-files.txt"
++CONFIG_INITRAMFS_ROOT_UID=1000
++CONFIG_INITRAMFS_ROOT_GID=1000
+++# CONFIG_RD_GZIP is not set
++CONFIG_RD_LZMA=y
++CONFIG_EMBEDDED=y
++CONFIG_SLAB=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_DEFAULT_DEADLINE=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_ADVANCED_ROUTER=y
++CONFIG_IP_MULTIPLE_TABLES=y
++CONFIG_IP_ROUTE_MULTIPATH=y
++CONFIG_IP_ROUTE_VERBOSE=y
++CONFIG_IP_MROUTE=y
++CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
++CONFIG_ARPD=y
++CONFIG_SYN_COOKIES=y
++CONFIG_NETFILTER=y
++CONFIG_BRIDGE=m
++CONFIG_VLAN_8021Q=y
++CONFIG_NET_SCHED=y
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_MTD=y
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=y
++CONFIG_MTD_CFI_ADV_OPTIONS=y
++CONFIG_MTD_CFI_GEOMETRY=y
++CONFIG_MTD_CFI_INTELEXT=y
++CONFIG_MTD_CFI_AMDSTD=y
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_LANTIQ=y
++CONFIG_MISC_DEVICES=y
++CONFIG_NETDEVICES=y
++CONFIG_MII=y
++CONFIG_LANTIQ_ETOP=y
++CONFIG_PHYLIB=y
++CONFIG_SERIAL_LANTIQ=y
++CONFIG_PINCTRL=y
++CONFIG_GPIO_SYSFS=y
++CONFIG_WATCHDOG=y
++CONFIG_LANTIQ_WDT=y
++CONFIG_TMPFS=y
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_SUMMARY=y
++CONFIG_JFFS2_FS_XATTR=y
++CONFIG_JFFS2_COMPRESSION_OPTIONS=y
++CONFIG_SQUASHFS=y
++CONFIG_SQUASHFS_XZ=y
++CONFIG_STRIP_ASM_SYMS=y
++CONFIG_DEBUG_FS=y
+diff --git a/arch/mips/configs/falcon_defconfig b/arch/mips/configs/falcon_defconfig
+new file mode 100644
+index 0000000..ce242a8
+--- /dev/null
++++ b/arch/mips/configs/falcon_defconfig
+@@ -0,0 +1,72 @@
++CONFIG_LANTIQ=y
++CONFIG_SOC_FALCON=y
++CONFIG_CPU_MIPS32_R2=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_EXPERIMENTAL=y
++CONFIG_DEFAULT_HOSTNAME="falcon"
++CONFIG_SYSVIPC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE="../root-lantiq/ ../root-lantiq/initramfs-base-files.txt"
++CONFIG_INITRAMFS_ROOT_UID=1000
++CONFIG_INITRAMFS_ROOT_GID=1000
+++# CONFIG_RD_GZIP is not set
++CONFIG_RD_LZMA=y
++CONFIG_EMBEDDED=y
++CONFIG_SLAB=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_DEFAULT_DEADLINE=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_ADVANCED_ROUTER=y
++CONFIG_IP_MULTIPLE_TABLES=y
++CONFIG_IP_ROUTE_MULTIPATH=y
++CONFIG_IP_ROUTE_VERBOSE=y
++CONFIG_IP_MROUTE=y
++CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
++CONFIG_ARPD=y
++CONFIG_SYN_COOKIES=y
++CONFIG_NETFILTER=y
++CONFIG_BRIDGE=m
++CONFIG_VLAN_8021Q=y
++CONFIG_NET_SCHED=y
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_MTD=y
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=y
++CONFIG_MTD_CFI_ADV_OPTIONS=y
++CONFIG_MTD_CFI_GEOMETRY=y
++CONFIG_MTD_CFI_INTELEXT=y
++CONFIG_MTD_CFI_AMDSTD=y
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_LANTIQ=y
++CONFIG_MTD_M25P80=y
++CONFIG_MISC_DEVICES=y
++CONFIG_EEPROM_AT24=y
++CONFIG_NETDEVICES=y
++CONFIG_MII=y
++CONFIG_PHYLIB=y
++CONFIG_SERIAL_LANTIQ=y
++CONFIG_I2C=y
++CONFIG_I2C_FALCON=y
++CONFIG_SPI=y
++CONFIG_SPI_FALCON=y
++CONFIG_PINCTRL=y
++CONFIG_GPIO_SYSFS=y
++CONFIG_WATCHDOG=y
++CONFIG_LANTIQ_WDT=y
++CONFIG_TMPFS=y
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_SUMMARY=y
++CONFIG_JFFS2_FS_XATTR=y
++CONFIG_JFFS2_COMPRESSION_OPTIONS=y
++CONFIG_SQUASHFS=y
++CONFIG_SQUASHFS_XZ=y
++CONFIG_STRIP_ASM_SYMS=y
++CONFIG_DEBUG_FS=y
+diff --git a/arch/mips/configs/xway_defconfig b/arch/mips/configs/xway_defconfig
+new file mode 100644
+index 0000000..510a964
+--- /dev/null
++++ b/arch/mips/configs/xway_defconfig
+@@ -0,0 +1,66 @@
++CONFIG_LANTIQ=y
++CONFIG_CPU_MIPS32_R2=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_EXPERIMENTAL=y
++CONFIG_DEFAULT_HOSTNAME="danube"
++CONFIG_SYSVIPC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE="../root-lantiq/ ../root-lantiq/initramfs-base-files.txt"
++CONFIG_INITRAMFS_ROOT_UID=1000
++CONFIG_INITRAMFS_ROOT_GID=1000
++# CONFIG_RD_GZIP is not set
++CONFIG_RD_LZMA=y
++CONFIG_EMBEDDED=y
++CONFIG_SLAB=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_DEFAULT_DEADLINE=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_ADVANCED_ROUTER=y
++CONFIG_IP_MULTIPLE_TABLES=y
++CONFIG_IP_ROUTE_MULTIPATH=y
++CONFIG_IP_ROUTE_VERBOSE=y
++CONFIG_IP_MROUTE=y
++CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
++CONFIG_ARPD=y
++CONFIG_SYN_COOKIES=y
++CONFIG_NETFILTER=y
++CONFIG_BRIDGE=m
++CONFIG_VLAN_8021Q=y
++CONFIG_NET_SCHED=y
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_MTD=y
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=y
++CONFIG_MTD_CFI_ADV_OPTIONS=y
++CONFIG_MTD_CFI_GEOMETRY=y
++CONFIG_MTD_CFI_INTELEXT=y
++CONFIG_MTD_CFI_AMDSTD=y
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_LANTIQ=y
++CONFIG_MISC_DEVICES=y
++CONFIG_NETDEVICES=y
++CONFIG_MII=y
++CONFIG_LANTIQ_ETOP=y
++CONFIG_PHYLIB=y
++CONFIG_SERIAL_LANTIQ=y
++CONFIG_PINCTRL=y
++CONFIG_GPIO_SYSFS=y
++CONFIG_WATCHDOG=y
++CONFIG_LANTIQ_WDT=y
++CONFIG_TMPFS=y
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_SUMMARY=y
++CONFIG_JFFS2_FS_XATTR=y
++CONFIG_JFFS2_COMPRESSION_OPTIONS=y
++CONFIG_SQUASHFS=y
++CONFIG_SQUASHFS_XZ=y
++CONFIG_STRIP_ASM_SYMS=y
++CONFIG_DEBUG_FS=y
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0013-MAINTAINERS-add-entry-for-Lantiq-related-files.patch b/target/linux/lantiq/patches-3.3/0013-MAINTAINERS-add-entry-for-Lantiq-related-files.patch
new file mode 100644
index 0000000000..18d7086405
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0013-MAINTAINERS-add-entry-for-Lantiq-related-files.patch
@@ -0,0 +1,38 @@
+From adb6262219beb9ba1986dc0216911e2611a6a996 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 10 Nov 2011 19:32:37 +0100
+Subject: [PATCH 13/70] MAINTAINERS: add entry for Lantiq related files
+
+Adds new entry to MAINTAINERS file for Lantiq SoC related code.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ MAINTAINERS |   12 ++++++++++++
+ 1 files changed, 12 insertions(+), 0 deletions(-)
+
+diff --git a/MAINTAINERS b/MAINTAINERS
+index 9c63a43..a2bf032 100644
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -4392,6 +4392,18 @@ S:	Supported
+ F:	Documentation/mips/
+ F:	arch/mips/
+ 
++MIPS/LANTIQ
++M:	John Crispin <blogic@openwrt.org>
++M:	Thomas Langer <thomas.langer@lantiq.com>
++S:	Maintained
++F:	arch/mips/lantiq/*
++F:	drivers/i2c/busses/i2c-falcon.c 
++F:	drivers/mtd/maps/lantiq-flash.c
++F:	drivers/net/ethernet/lantiq_etop.c
++F:	drivers/spi/spi-falcon.c 
++F:	drivers/tty/serial/lantiq.c
++F:	drivers/watchdog/lantiq_wdt.c
++
+ MISCELLANEOUS MCA-SUPPORT
+ M:	James Bottomley <James.Bottomley@HansenPartnership.com>
+ S:	Maintained
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0014-MIPS-lantiq-enable-oprofile-support-on-lantiq-target.patch b/target/linux/lantiq/patches-3.3/0014-MIPS-lantiq-enable-oprofile-support-on-lantiq-target.patch
new file mode 100644
index 0000000000..dfac38fae9
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0014-MIPS-lantiq-enable-oprofile-support-on-lantiq-target.patch
@@ -0,0 +1,53 @@
+From 4a6b5278deced0bd79df1521df291fe744c260b5 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 24 Aug 2011 13:28:55 +0200
+Subject: [PATCH 14/70] MIPS: lantiq: enable oprofile support on lantiq
+ targets
+
+This patch sets the performance counters irq and HAVE_OPROFILE flag for Lantiq
+SoCs.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/Kconfig      |    1 +
+ arch/mips/lantiq/irq.c |    5 +++++
+ 2 files changed, 6 insertions(+), 0 deletions(-)
+
+diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
+index 5ab6e89..8ad52f4 100644
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -229,6 +229,7 @@ config LANTIQ
+ 	select SWAP_IO_SPACE
+ 	select BOOT_RAW
+ 	select HAVE_CLK
++	select HAVE_OPROFILE
+ 	select MIPS_MACHINE
+ 
+ config LASAT
+diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
+index f56bcce..ada3874 100644
+--- a/arch/mips/lantiq/irq.c
++++ b/arch/mips/lantiq/irq.c
+@@ -40,6 +40,9 @@
+ 
+ #define MAX_EIU			6
+ 
++/* the performance counter */
++#define LTQ_PERF_IRQ		(INT_NUM_IM4_IRL0 + 31)
++
+ /* irqs generated by device attached to the EBU need to be acked in
+  * a special manner
+  */
+@@ -317,6 +320,8 @@ void __init arch_init_irq(void)
+ 	set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ0 | IE_IRQ1 |
+ 		IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
+ #endif
++
++	cp0_perfcount_irq = LTQ_PERF_IRQ;
+ }
+ 
+ unsigned int __cpuinit get_c0_compare_int(void)
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0015-NET-MIPS-lantiq-make-etop-ethernet-work-on-ase-ar9.patch b/target/linux/lantiq/patches-3.3/0015-NET-MIPS-lantiq-make-etop-ethernet-work-on-ase-ar9.patch
new file mode 100644
index 0000000000..91ead94148
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0015-NET-MIPS-lantiq-make-etop-ethernet-work-on-ase-ar9.patch
@@ -0,0 +1,408 @@
+From 204df03dd8524ab3ee8261feab44397dc890a840 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 10 Aug 2011 15:32:16 +0200
+Subject: [PATCH 15/70] NET: MIPS: lantiq: make etop ethernet work on ase/ar9
+
+Extend the driver to handle the different DMA channel layout for AR9 and
+Amazon-SE SoCs. The patch also adds support for the integrated PHY found
+on Amazon-SE and the gigabit switch found inside the AR9.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Cc: netdev@vger.kernel.org
+---
+ .../mips/include/asm/mach-lantiq/xway/lantiq_irq.h |   22 +---
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h |   10 ++
+ arch/mips/lantiq/xway/devices.c                    |   11 +-
+ drivers/net/ethernet/lantiq_etop.c                 |  171 ++++++++++++++++++--
+ 4 files changed, 174 insertions(+), 40 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
+index b4465a8..2a8d5ad 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
+@@ -38,26 +38,8 @@
+ 
+ #define MIPS_CPU_TIMER_IRQ		7
+ 
+-#define LTQ_DMA_CH0_INT		(INT_NUM_IM2_IRL0)
+-#define LTQ_DMA_CH1_INT		(INT_NUM_IM2_IRL0 + 1)
+-#define LTQ_DMA_CH2_INT		(INT_NUM_IM2_IRL0 + 2)
+-#define LTQ_DMA_CH3_INT		(INT_NUM_IM2_IRL0 + 3)
+-#define LTQ_DMA_CH4_INT		(INT_NUM_IM2_IRL0 + 4)
+-#define LTQ_DMA_CH5_INT		(INT_NUM_IM2_IRL0 + 5)
+-#define LTQ_DMA_CH6_INT		(INT_NUM_IM2_IRL0 + 6)
+-#define LTQ_DMA_CH7_INT		(INT_NUM_IM2_IRL0 + 7)
+-#define LTQ_DMA_CH8_INT		(INT_NUM_IM2_IRL0 + 8)
+-#define LTQ_DMA_CH9_INT		(INT_NUM_IM2_IRL0 + 9)
+-#define LTQ_DMA_CH10_INT	(INT_NUM_IM2_IRL0 + 10)
+-#define LTQ_DMA_CH11_INT	(INT_NUM_IM2_IRL0 + 11)
+-#define LTQ_DMA_CH12_INT	(INT_NUM_IM2_IRL0 + 25)
+-#define LTQ_DMA_CH13_INT	(INT_NUM_IM2_IRL0 + 26)
+-#define LTQ_DMA_CH14_INT	(INT_NUM_IM2_IRL0 + 27)
+-#define LTQ_DMA_CH15_INT	(INT_NUM_IM2_IRL0 + 28)
+-#define LTQ_DMA_CH16_INT	(INT_NUM_IM2_IRL0 + 29)
+-#define LTQ_DMA_CH17_INT	(INT_NUM_IM2_IRL0 + 30)
+-#define LTQ_DMA_CH18_INT	(INT_NUM_IM2_IRL0 + 16)
+-#define LTQ_DMA_CH19_INT	(INT_NUM_IM2_IRL0 + 21)
++#define LTQ_DMA_ETOP		((ltq_is_ase()) ? \
++				(INT_NUM_IM3_IRL0) : (INT_NUM_IM2_IRL0))
+ 
+ #define LTQ_PPE_MBOX_INT	(INT_NUM_IM2_IRL0 + 24)
+ 
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index e31f52d..6983d75 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -82,6 +82,7 @@
+ #define LTQ_PMU_SIZE		0x1000
+ 
+ #define PMU_DMA			0x0020
++#define PMU_EPHY		0x0080
+ #define PMU_USB			0x8041
+ #define PMU_LED			0x0800
+ #define PMU_GPT			0x1000
+@@ -93,6 +94,10 @@
+ #define LTQ_ETOP_BASE_ADDR	0x1E180000
+ #define LTQ_ETOP_SIZE		0x40000
+ 
++/* GBIT - gigabit switch */
++#define LTQ_GBIT_BASE_ADDR	0x1E108000
++#define LTQ_GBIT_SIZE		0x200
++
+ /* DMA */
+ #define LTQ_DMA_BASE_ADDR	0x1E104100
+ #define LTQ_DMA_SIZE		0x800
+@@ -147,6 +152,11 @@ extern void ltq_pmu_enable(unsigned int module);
+ extern void ltq_pmu_disable(unsigned int module);
+ extern void ltq_cgu_enable(unsigned int clk);
+ 
++static inline int ltq_is_ase(void)
++{
++	return (ltq_get_soc_type() == SOC_TYPE_AMAZON_SE);
++}
++
+ static inline int ltq_is_ar9(void)
+ {
+ 	return (ltq_get_soc_type() == SOC_TYPE_AR9);
+diff --git a/arch/mips/lantiq/xway/devices.c b/arch/mips/lantiq/xway/devices.c
+index f97e565..eab4644d 100644
+--- a/arch/mips/lantiq/xway/devices.c
++++ b/arch/mips/lantiq/xway/devices.c
+@@ -74,18 +74,23 @@ void __init ltq_register_ase_asc(void)
+ }
+ 
+ /* ethernet */
+-static struct resource ltq_etop_resources =
+-	MEM_RES("etop", LTQ_ETOP_BASE_ADDR, LTQ_ETOP_SIZE);
++static struct resource ltq_etop_resources[] = {
++	MEM_RES("etop", LTQ_ETOP_BASE_ADDR, LTQ_ETOP_SIZE),
++	MEM_RES("gbit", LTQ_GBIT_BASE_ADDR, LTQ_GBIT_SIZE),
++};
+ 
+ static struct platform_device ltq_etop = {
+ 	.name		= "ltq_etop",
+-	.resource	= &ltq_etop_resources,
++	.resource	= ltq_etop_resources,
+ 	.num_resources	= 1,
+ };
+ 
+ void __init
+ ltq_register_etop(struct ltq_eth_data *eth)
+ {
++	/* only register the gphy on socs that have one */
++	if (ltq_is_ar9() | ltq_is_vr9())
++		ltq_etop.num_resources = 2;
+ 	if (eth) {
+ 		ltq_etop.dev.platform_data = eth;
+ 		platform_device_register(&ltq_etop);
+diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
+index 85e2c6c..e799b88 100644
+--- a/drivers/net/ethernet/lantiq_etop.c
++++ b/drivers/net/ethernet/lantiq_etop.c
+@@ -71,10 +71,43 @@
+ #define ETOP_MII_REVERSE	0xe
+ #define ETOP_PLEN_UNDER		0x40
+ #define ETOP_CGEN		0x800
+-
+-/* use 2 static channels for TX/RX */
++#define ETOP_CFG_MII0		0x01
++
++#define LTQ_GBIT_MDIO_CTL	0xCC
++#define LTQ_GBIT_MDIO_DATA	0xd0
++#define LTQ_GBIT_GCTL0		0x68
++#define LTQ_GBIT_PMAC_HD_CTL	0x8c
++#define LTQ_GBIT_P0_CTL		0x4
++#define LTQ_GBIT_PMAC_RX_IPG	0xa8
++
++#define PMAC_HD_CTL_AS		(1 << 19)
++#define PMAC_HD_CTL_RXSH	(1 << 22)
++
++/* Switch Enable (0=disable, 1=enable) */
++#define GCTL0_SE		0x80000000
++/* Disable MDIO auto polling (0=disable, 1=enable) */
++#define PX_CTL_DMDIO		0x00400000
++
++/* register information for the gbit's MDIO bus */
++#define MDIO_XR9_REQUEST	0x00008000
++#define MDIO_XR9_READ		0x00000800
++#define MDIO_XR9_WRITE		0x00000400
++#define MDIO_XR9_REG_MASK	0x1f
++#define MDIO_XR9_ADDR_MASK	0x1f
++#define MDIO_XR9_RD_MASK	0xffff
++#define MDIO_XR9_REG_OFFSET	0
++#define MDIO_XR9_ADDR_OFFSET	5
++#define MDIO_XR9_WR_OFFSET	16
++
++/* the newer xway socks have a embedded 3/7 port gbit multiplexer */
++#define ltq_has_gbit()		(ltq_is_ar9() || ltq_is_vr9())
++
++/* use 2 static channels for TX/RX
++   depending on the SoC we need to use different DMA channels for ethernet */
+ #define LTQ_ETOP_TX_CHANNEL	1
+-#define LTQ_ETOP_RX_CHANNEL	6
++#define LTQ_ETOP_RX_CHANNEL	((ltq_is_ase()) ? (5) : \
++				((ltq_has_gbit()) ? (0) : (6)))
++
+ #define IS_TX(x)		(x == LTQ_ETOP_TX_CHANNEL)
+ #define IS_RX(x)		(x == LTQ_ETOP_RX_CHANNEL)
+ 
+@@ -83,9 +116,15 @@
+ #define ltq_etop_w32_mask(x, y, z)	\
+ 		ltq_w32_mask(x, y, ltq_etop_membase + (z))
+ 
++#define ltq_gbit_r32(x)		ltq_r32(ltq_gbit_membase + (x))
++#define ltq_gbit_w32(x, y)	ltq_w32(x, ltq_gbit_membase + (y))
++#define ltq_gbit_w32_mask(x, y, z)	\
++		ltq_w32_mask(x, y, ltq_gbit_membase + (z))
++
+ #define DRV_VERSION	"1.0"
+ 
+ static void __iomem *ltq_etop_membase;
++static void __iomem *ltq_gbit_membase;
+ 
+ struct ltq_etop_chan {
+ 	int idx;
+@@ -111,6 +150,9 @@ struct ltq_etop_priv {
+ 	spinlock_t lock;
+ };
+ 
++static int ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr,
++				int phy_reg, u16 phy_data);
++
+ static int
+ ltq_etop_alloc_skb(struct ltq_etop_chan *ch)
+ {
+@@ -212,7 +254,7 @@ static irqreturn_t
+ ltq_etop_dma_irq(int irq, void *_priv)
+ {
+ 	struct ltq_etop_priv *priv = _priv;
+-	int ch = irq - LTQ_DMA_CH0_INT;
++	int ch = irq - LTQ_DMA_ETOP;
+ 
+ 	napi_schedule(&priv->ch[ch].napi);
+ 	return IRQ_HANDLED;
+@@ -245,15 +287,43 @@ ltq_etop_hw_exit(struct net_device *dev)
+ 			ltq_etop_free_channel(dev, &priv->ch[i]);
+ }
+ 
++static void
++ltq_etop_gbit_init(void)
++{
++	ltq_pmu_enable(PMU_SWITCH);
++
++	ltq_gpio_request(42, 2, 1, "MDIO");
++	ltq_gpio_request(43, 2, 1, "MDC");
++
++	ltq_gbit_w32_mask(0, GCTL0_SE, LTQ_GBIT_GCTL0);
++	/** Disable MDIO auto polling mode */
++	ltq_gbit_w32_mask(0, PX_CTL_DMDIO, LTQ_GBIT_P0_CTL);
++	/* set 1522 packet size */
++	ltq_gbit_w32_mask(0x300, 0, LTQ_GBIT_GCTL0);
++	/* disable pmac & dmac headers */
++	ltq_gbit_w32_mask(PMAC_HD_CTL_AS | PMAC_HD_CTL_RXSH, 0,
++		LTQ_GBIT_PMAC_HD_CTL);
++	/* Due to traffic halt when burst length 8,
++		replace default IPG value with 0x3B */
++	ltq_gbit_w32(0x3B, LTQ_GBIT_PMAC_RX_IPG);
++}
++
+ static int
+ ltq_etop_hw_init(struct net_device *dev)
+ {
+ 	struct ltq_etop_priv *priv = netdev_priv(dev);
++	unsigned int mii_mode = priv->pldata->mii_mode;
+ 	int i;
+ 
+ 	ltq_pmu_enable(PMU_PPE);
+ 
+-	switch (priv->pldata->mii_mode) {
++	if (ltq_has_gbit()) {
++		ltq_etop_gbit_init();
++		/* force the etops link to the gbit to MII */
++		mii_mode = PHY_INTERFACE_MODE_MII;
++	}
++
++	switch (mii_mode) {
+ 	case PHY_INTERFACE_MODE_RMII:
+ 		ltq_etop_w32_mask(ETOP_MII_MASK,
+ 			ETOP_MII_REVERSE, LTQ_ETOP_CFG);
+@@ -265,6 +335,18 @@ ltq_etop_hw_init(struct net_device *dev)
+ 		break;
+ 
+ 	default:
++		if (ltq_is_ase()) {
++			ltq_pmu_enable(PMU_EPHY);
++			/* disable external MII */
++			ltq_etop_w32_mask(0, ETOP_CFG_MII0, LTQ_ETOP_CFG);
++			/* enable clock for internal PHY */
++			ltq_cgu_enable(CGU_EPHY);
++			/* we need to write this magic to the internal phy to
++			   make it work */
++			ltq_etop_mdio_wr(NULL, 0x8, 0x12, 0xC020);
++			pr_info("Selected EPHY mode\n");
++			break;
++		}
+ 		netdev_err(dev, "unknown mii mode %d\n",
+ 			priv->pldata->mii_mode);
+ 		return -ENOTSUPP;
+@@ -276,7 +358,7 @@ ltq_etop_hw_init(struct net_device *dev)
+ 	ltq_dma_init_port(DMA_PORT_ETOP);
+ 
+ 	for (i = 0; i < MAX_DMA_CHAN; i++) {
+-		int irq = LTQ_DMA_CH0_INT + i;
++		int irq = LTQ_DMA_ETOP + i;
+ 		struct ltq_etop_chan *ch = &priv->ch[i];
+ 
+ 		ch->idx = ch->dma.nr = i;
+@@ -340,6 +422,39 @@ static const struct ethtool_ops ltq_etop_ethtool_ops = {
+ };
+ 
+ static int
++ltq_etop_mdio_wr_xr9(struct mii_bus *bus, int phy_addr,
++		int phy_reg, u16 phy_data)
++{
++	u32 val = MDIO_XR9_REQUEST | MDIO_XR9_WRITE |
++		(phy_data << MDIO_XR9_WR_OFFSET) |
++		((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) |
++		((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET);
++
++	while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
++		;
++	ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL);
++	while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
++		;
++	return 0;
++}
++
++static int
++ltq_etop_mdio_rd_xr9(struct mii_bus *bus, int phy_addr, int phy_reg)
++{
++	u32 val = MDIO_XR9_REQUEST | MDIO_XR9_READ |
++		((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) |
++		((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET);
++
++	while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
++		;
++	ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL);
++	while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
++		;
++	val = ltq_gbit_r32(LTQ_GBIT_MDIO_DATA) & MDIO_XR9_RD_MASK;
++	return val;
++}
++
++static int
+ ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data)
+ {
+ 	u32 val = MDIO_REQUEST |
+@@ -380,14 +495,11 @@ ltq_etop_mdio_probe(struct net_device *dev)
+ {
+ 	struct ltq_etop_priv *priv = netdev_priv(dev);
+ 	struct phy_device *phydev = NULL;
+-	int phy_addr;
+ 
+-	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+-		if (priv->mii_bus->phy_map[phy_addr]) {
+-			phydev = priv->mii_bus->phy_map[phy_addr];
+-			break;
+-		}
+-	}
++	if (ltq_is_ase())
++		phydev = priv->mii_bus->phy_map[8];
++	else
++		phydev = priv->mii_bus->phy_map[0];
+ 
+ 	if (!phydev) {
+ 		netdev_err(dev, "no PHY found\n");
+@@ -409,6 +521,9 @@ ltq_etop_mdio_probe(struct net_device *dev)
+ 			      | SUPPORTED_Autoneg
+ 			      | SUPPORTED_MII
+ 			      | SUPPORTED_TP);
++	if (ltq_has_gbit())
++		phydev->supported &= SUPPORTED_1000baseT_Half
++					| SUPPORTED_1000baseT_Full;
+ 
+ 	phydev->advertising = phydev->supported;
+ 	priv->phydev = phydev;
+@@ -434,8 +549,13 @@ ltq_etop_mdio_init(struct net_device *dev)
+ 	}
+ 
+ 	priv->mii_bus->priv = dev;
+-	priv->mii_bus->read = ltq_etop_mdio_rd;
+-	priv->mii_bus->write = ltq_etop_mdio_wr;
++	if (ltq_has_gbit()) {
++		priv->mii_bus->read = ltq_etop_mdio_rd_xr9;
++		priv->mii_bus->write = ltq_etop_mdio_wr_xr9;
++	} else {
++		priv->mii_bus->read = ltq_etop_mdio_rd;
++		priv->mii_bus->write = ltq_etop_mdio_wr;
++	}
+ 	priv->mii_bus->name = "ltq_mii";
+ 	snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
+ 		priv->pdev->name, priv->pdev->id);
+@@ -526,9 +646,9 @@ ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
+ 	struct ltq_etop_priv *priv = netdev_priv(dev);
+ 	struct ltq_etop_chan *ch = &priv->ch[(queue << 1) | 1];
+ 	struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+-	int len;
+ 	unsigned long flags;
+ 	u32 byte_offset;
++	int len;
+ 
+ 	len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+ 
+@@ -702,7 +822,7 @@ ltq_etop_probe(struct platform_device *pdev)
+ {
+ 	struct net_device *dev;
+ 	struct ltq_etop_priv *priv;
+-	struct resource *res;
++	struct resource *res, *gbit_res;
+ 	int err;
+ 	int i;
+ 
+@@ -730,6 +850,23 @@ ltq_etop_probe(struct platform_device *pdev)
+ 		goto err_out;
+ 	}
+ 
++	if (ltq_has_gbit()) {
++		gbit_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++		if (!gbit_res) {
++			dev_err(&pdev->dev, "failed to get gbit resource\n");
++			err = -ENOENT;
++			goto err_out;
++		}
++		ltq_gbit_membase = devm_ioremap_nocache(&pdev->dev,
++			gbit_res->start, resource_size(gbit_res));
++		if (!ltq_gbit_membase) {
++			dev_err(&pdev->dev, "failed to remap gigabit switch %d\n",
++				pdev->id);
++			err = -ENOMEM;
++			goto err_out;
++		}
++	}
++
+ 	dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
+ 	strcpy(dev->name, "eth%d");
+ 	dev->netdev_ops = &ltq_eth_netdev_ops;
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0016-NET-MIPS-lantiq-non-existing-phy-was-not-handled-gra.patch b/target/linux/lantiq/patches-3.3/0016-NET-MIPS-lantiq-non-existing-phy-was-not-handled-gra.patch
new file mode 100644
index 0000000000..f18827ac0d
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0016-NET-MIPS-lantiq-non-existing-phy-was-not-handled-gra.patch
@@ -0,0 +1,67 @@
+From d6a9d52bfcc2d8f163e95920cf3678847bb97f18 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 15 Nov 2011 14:52:21 +0100
+Subject: [PATCH 16/70] NET: MIPS: lantiq: non existing phy was not handled
+ gracefully
+
+The code blindly assumed that that a PHY device was present causing a BadVA.
+In addition the driver should not fail to load incase no PHY was found.
+Instead we print the following line and continue with no attached PHY.
+
+   etop: mdio probe failed
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Cc: netdev@vger.kernel.org
+---
+ drivers/net/ethernet/lantiq_etop.c |   14 ++++++++------
+ 1 files changed, 8 insertions(+), 6 deletions(-)
+
+diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
+index e799b88..5a8ca89 100644
+--- a/drivers/net/ethernet/lantiq_etop.c
++++ b/drivers/net/ethernet/lantiq_etop.c
+@@ -614,7 +614,8 @@ ltq_etop_open(struct net_device *dev)
+ 		ltq_dma_open(&ch->dma);
+ 		napi_enable(&ch->napi);
+ 	}
+-	phy_start(priv->phydev);
++	if (priv->phydev)
++		phy_start(priv->phydev);
+ 	netif_tx_start_all_queues(dev);
+ 	return 0;
+ }
+@@ -626,7 +627,8 @@ ltq_etop_stop(struct net_device *dev)
+ 	int i;
+ 
+ 	netif_tx_stop_all_queues(dev);
+-	phy_stop(priv->phydev);
++	if (priv->phydev)
++		phy_stop(priv->phydev);
+ 	for (i = 0; i < MAX_DMA_CHAN; i++) {
+ 		struct ltq_etop_chan *ch = &priv->ch[i];
+ 
+@@ -772,9 +774,10 @@ ltq_etop_init(struct net_device *dev)
+ 	if (err)
+ 		goto err_netdev;
+ 	ltq_etop_set_multicast_list(dev);
+-	err = ltq_etop_mdio_init(dev);
+-	if (err)
+-		goto err_netdev;
++	if (!ltq_etop_mdio_init(dev))
++		dev->ethtool_ops = &ltq_etop_ethtool_ops;
++	else
++		pr_warn("etop: mdio probe failed\n");;
+ 	return 0;
+ 
+ err_netdev:
+@@ -870,7 +873,6 @@ ltq_etop_probe(struct platform_device *pdev)
+ 	dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
+ 	strcpy(dev->name, "eth%d");
+ 	dev->netdev_ops = &ltq_eth_netdev_ops;
+-	dev->ethtool_ops = &ltq_etop_ethtool_ops;
+ 	priv = netdev_priv(dev);
+ 	priv->res = res;
+ 	priv->pdev = pdev;
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0017-NET-MIPS-lantiq-return-value-of-request_irq-was-not-.patch b/target/linux/lantiq/patches-3.3/0017-NET-MIPS-lantiq-return-value-of-request_irq-was-not-.patch
new file mode 100644
index 0000000000..e3ef066c1e
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0017-NET-MIPS-lantiq-return-value-of-request_irq-was-not-.patch
@@ -0,0 +1,71 @@
+From 965d488202829699dd9d089adb4c8b605e9de6cd Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 15 Nov 2011 15:56:06 +0100
+Subject: [PATCH 17/70] NET: MIPS: lantiq: return value of request_irq was not
+ handled gracefully
+
+The return values of request_irq() were not checked leading to the following
+error message.
+
+drivers/net/ethernet/lantiq_etop.c: In function 'ltq_etop_hw_init':
+drivers/net/ethernet/lantiq_etop.c:368:15: warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result
+drivers/net/ethernet/lantiq_etop.c:377:15: warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Cc: netdev@vger.kernel.org
+---
+ drivers/net/ethernet/lantiq_etop.c |   14 ++++++++------
+ 1 files changed, 8 insertions(+), 6 deletions(-)
+
+diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
+index 5a8ca89..daba994 100644
+--- a/drivers/net/ethernet/lantiq_etop.c
++++ b/drivers/net/ethernet/lantiq_etop.c
+@@ -313,6 +313,7 @@ ltq_etop_hw_init(struct net_device *dev)
+ {
+ 	struct ltq_etop_priv *priv = netdev_priv(dev);
+ 	unsigned int mii_mode = priv->pldata->mii_mode;
++	int err = 0;
+ 	int i;
+ 
+ 	ltq_pmu_enable(PMU_PPE);
+@@ -357,7 +358,7 @@ ltq_etop_hw_init(struct net_device *dev)
+ 
+ 	ltq_dma_init_port(DMA_PORT_ETOP);
+ 
+-	for (i = 0; i < MAX_DMA_CHAN; i++) {
++	for (i = 0; i < MAX_DMA_CHAN && !err; i++) {
+ 		int irq = LTQ_DMA_ETOP + i;
+ 		struct ltq_etop_chan *ch = &priv->ch[i];
+ 
+@@ -365,21 +366,22 @@ ltq_etop_hw_init(struct net_device *dev)
+ 
+ 		if (IS_TX(i)) {
+ 			ltq_dma_alloc_tx(&ch->dma);
+-			request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
++			err = request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
+ 				"etop_tx", priv);
+ 		} else if (IS_RX(i)) {
+ 			ltq_dma_alloc_rx(&ch->dma);
+ 			for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
+ 					ch->dma.desc++)
+ 				if (ltq_etop_alloc_skb(ch))
+-					return -ENOMEM;
++					err = -ENOMEM;
+ 			ch->dma.desc = 0;
+-			request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
++			err = request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
+ 				"etop_rx", priv);
+ 		}
+-		ch->dma.irq = irq;
++		if (!err)
++			ch->dma.irq = irq;
+ 	}
+-	return 0;
++	return err;
+ }
+ 
+ static void
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0018-MIPS-lantiq-use-devres-managed-gpios.patch b/target/linux/lantiq/patches-3.3/0018-MIPS-lantiq-use-devres-managed-gpios.patch
new file mode 100644
index 0000000000..4d4e9202ec
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0018-MIPS-lantiq-use-devres-managed-gpios.patch
@@ -0,0 +1,282 @@
+From 400943cf88102423ac10a19c56d053d9c1580a77 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 8 Mar 2012 08:37:25 +0100
+Subject: [PATCH 18/70] MIPS: lantiq: use devres managed gpios
+
+3.2 introduced devm_request_gpio() to allow managed gpios.
+
+The devres api requires a struct device pointer to work. Add a parameter to ltq_gpio_request()
+so that managed gpios can work.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ .../include/asm/mach-lantiq/falcon/lantiq_soc.h    |    4 +---
+ arch/mips/include/asm/mach-lantiq/lantiq.h         |    4 ++++
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h |    3 ---
+ arch/mips/lantiq/falcon/gpio.c                     |    4 ++--
+ arch/mips/lantiq/falcon/prom.c                     |    7 -------
+ arch/mips/lantiq/xway/gpio.c                       |    4 ++--
+ arch/mips/lantiq/xway/gpio_stp.c                   |   13 ++++++++-----
+ arch/mips/pci/pci-lantiq.c                         |   18 ++++++++++--------
+ drivers/net/ethernet/lantiq_etop.c                 |    9 ++++++---
+ drivers/tty/serial/lantiq.c                        |   12 ++++++++++++
+ 10 files changed, 45 insertions(+), 33 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+index b074748..a5dc06a 100644
+--- a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+@@ -126,9 +126,7 @@ extern __iomem void *ltq_sys1_membase;
+ #define ltq_sys1_w32_mask(clear, set, reg)   \
+ 	ltq_sys1_w32((ltq_sys1_r32(reg) & ~(clear)) | (set), reg)
+ 
+-/* gpio_request wrapper to help configure the pin */
+-extern int  ltq_gpio_request(unsigned int pin, unsigned int mux,
+-				unsigned int dir, const char *name);
++/* gpio wrapper to help configure the pin muxing */
+ extern int ltq_gpio_mux_set(unsigned int pin, unsigned int mux);
+ 
+ /* to keep the irq code generic we need to define these to 0 as falcon
+diff --git a/arch/mips/include/asm/mach-lantiq/lantiq.h b/arch/mips/include/asm/mach-lantiq/lantiq.h
+index 188de0f..924b91a 100644
+--- a/arch/mips/include/asm/mach-lantiq/lantiq.h
++++ b/arch/mips/include/asm/mach-lantiq/lantiq.h
+@@ -37,6 +37,10 @@ extern unsigned int ltq_get_soc_type(void);
+ /* spinlock all ebu i/o */
+ extern spinlock_t ebu_lock;
+ 
++/* request a non-gpio and set the PIO config */
++extern int ltq_gpio_request(struct device *dev, unsigned int pin,
++		unsigned int mux, unsigned int dir, const char *name);
++
+ /* some irq helpers */
+ extern void ltq_disable_irq(struct irq_data *data);
+ extern void ltq_mask_and_ack_irq(struct irq_data *data);
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index 6983d75..6c5b705 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -145,9 +145,6 @@
+ extern __iomem void *ltq_ebu_membase;
+ extern __iomem void *ltq_cgu_membase;
+ 
+-/* request a non-gpio and set the PIO config */
+-extern int  ltq_gpio_request(unsigned int pin, unsigned int mux,
+-				unsigned int dir, const char *name);
+ extern void ltq_pmu_enable(unsigned int module);
+ extern void ltq_pmu_disable(unsigned int module);
+ extern void ltq_cgu_enable(unsigned int clk);
+diff --git a/arch/mips/lantiq/falcon/gpio.c b/arch/mips/lantiq/falcon/gpio.c
+index 28f8639..a44f71b 100644
+--- a/arch/mips/lantiq/falcon/gpio.c
++++ b/arch/mips/lantiq/falcon/gpio.c
+@@ -97,7 +97,7 @@ int ltq_gpio_mux_set(unsigned int pin, unsigned int mux)
+ }
+ EXPORT_SYMBOL(ltq_gpio_mux_set);
+ 
+-int ltq_gpio_request(unsigned int pin, unsigned int mux,
++int ltq_gpio_request(struct device *dev, unsigned int pin, unsigned int mux,
+ 			unsigned int dir, const char *name)
+ {
+ 	int port = pin / 100;
+@@ -106,7 +106,7 @@ int ltq_gpio_request(unsigned int pin, unsigned int mux,
+ 	if (offset >= PINS_PER_PORT || port >= MAX_PORTS)
+ 		return -EINVAL;
+ 
+-	if (gpio_request(pin, name)) {
++	if (devm_gpio_request(dev, pin, name)) {
+ 		pr_err("failed to setup lantiq gpio: %s\n", name);
+ 		return -EBUSY;
+ 	}
+diff --git a/arch/mips/lantiq/falcon/prom.c b/arch/mips/lantiq/falcon/prom.c
+index b50d6f9..f98b389 100644
+--- a/arch/mips/lantiq/falcon/prom.c
++++ b/arch/mips/lantiq/falcon/prom.c
+@@ -27,9 +27,6 @@
+ #define TYPE_SHIFT	26
+ #define TYPE_MASK	0x3C000000
+ 
+-#define MUXC_SIF_RX_PIN		112
+-#define MUXC_SIF_TX_PIN		113
+-
+ /* this parameter allows us enable/disable asc1 via commandline */
+ static int register_asc1;
+ static int __init
+@@ -48,10 +45,6 @@ ltq_soc_setup(void)
+ 	falcon_register_gpio();
+ 	if (register_asc1) {
+ 		ltq_register_asc(1);
+-		if (ltq_gpio_request(MUXC_SIF_RX_PIN, 3, 0, "asc1-rx"))
+-			pr_err("failed to request asc1-rx");
+-		if (ltq_gpio_request(MUXC_SIF_TX_PIN, 3, 1, "asc1-tx"))
+-			pr_err("failed to request asc1-tx");
+ 		ltq_sysctl_activate(SYSCTL_SYS1, ACTS_ASC1_ACT);
+ 	}
+ }
+diff --git a/arch/mips/lantiq/xway/gpio.c b/arch/mips/lantiq/xway/gpio.c
+index 14ff7c7..54ec6c9 100644
+--- a/arch/mips/lantiq/xway/gpio.c
++++ b/arch/mips/lantiq/xway/gpio.c
+@@ -50,14 +50,14 @@ int irq_to_gpio(unsigned int gpio)
+ }
+ EXPORT_SYMBOL(irq_to_gpio);
+ 
+-int ltq_gpio_request(unsigned int pin, unsigned int mux,
++int ltq_gpio_request(struct device *dev, unsigned int pin, unsigned int mux,
+ 			unsigned int dir, const char *name)
+ {
+ 	int id = 0;
+ 
+ 	if (pin >= (MAX_PORTS * PINS_PER_PORT))
+ 		return -EINVAL;
+-	if (gpio_request(pin, name)) {
++	if (devm_gpio_request(dev, pin, name)) {
+ 		pr_err("failed to setup lantiq gpio: %s\n", name);
+ 		return -EBUSY;
+ 	}
+diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c
+index cb6f170..e6b4809 100644
+--- a/arch/mips/lantiq/xway/gpio_stp.c
++++ b/arch/mips/lantiq/xway/gpio_stp.c
+@@ -80,11 +80,6 @@ static struct gpio_chip ltq_stp_chip = {
+ 
+ static int ltq_stp_hw_init(void)
+ {
+-	/* the 3 pins used to control the external stp */
+-	ltq_gpio_request(4, 2, 1, "stp-st");
+-	ltq_gpio_request(5, 2, 1, "stp-d");
+-	ltq_gpio_request(6, 2, 1, "stp-sh");
+-
+ 	/* sane defaults */
+ 	ltq_stp_w32(0, LTQ_STP_AR);
+ 	ltq_stp_w32(0, LTQ_STP_CPU0);
+@@ -133,6 +128,14 @@ static int __devinit ltq_stp_probe(struct platform_device *pdev)
+ 		dev_err(&pdev->dev, "failed to remap STP memory\n");
+ 		return -ENOMEM;
+ 	}
++
++	/* the 3 pins used to control the external stp */
++	if (ltq_gpio_request(&pdev->dev, 4, 2, 1, "stp-st") ||
++			ltq_gpio_request(&pdev->dev, 5, 2, 1, "stp-d") ||
++			ltq_gpio_request(&pdev->dev, 6, 2, 1, "stp-sh")) {
++		dev_err(&pdev->dev, "failed to request needed gpios\n");
++		return -EBUSY;
++	}
+ 	ret = gpiochip_add(&ltq_stp_chip);
+ 	if (!ret)
+ 		ret = ltq_stp_hw_init();
+diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
+index c001c5a..47b551c 100644
+--- a/arch/mips/pci/pci-lantiq.c
++++ b/arch/mips/pci/pci-lantiq.c
+@@ -150,24 +150,26 @@ static u32 ltq_calc_bar11mask(void)
+ 	return bar11mask;
+ }
+ 
+-static void ltq_pci_setup_gpio(int gpio)
++static void ltq_pci_setup_gpio(struct device *dev)
+ {
++	struct ltq_pci_data *conf = (struct ltq_pci_data *) dev->platform_data;
+ 	int i;
+ 	for (i = 0; i < ARRAY_SIZE(ltq_pci_gpio_map); i++) {
+-		if (gpio & (1 << i)) {
+-			ltq_gpio_request(ltq_pci_gpio_map[i].pin,
++		if (conf->gpio & (1 << i)) {
++			ltq_gpio_request(dev, ltq_pci_gpio_map[i].pin,
+ 				ltq_pci_gpio_map[i].mux,
+ 				ltq_pci_gpio_map[i].dir,
+ 				ltq_pci_gpio_map[i].name);
+ 		}
+ 	}
+-	ltq_gpio_request(21, 0, 1, "pci-reset");
+-	ltq_pci_req_mask = (gpio >> PCI_REQ_SHIFT) & PCI_REQ_MASK;
++	ltq_gpio_request(dev, 21, 0, 1, "pci-reset");
++	ltq_pci_req_mask = (conf->gpio >> PCI_REQ_SHIFT) & PCI_REQ_MASK;
+ }
+ 
+-static int __devinit ltq_pci_startup(struct ltq_pci_data *conf)
++static int __devinit ltq_pci_startup(struct device *dev)
+ {
+ 	u32 temp_buffer;
++	struct ltq_pci_data *conf = (struct ltq_pci_data *) dev->platform_data;
+ 
+ 	/* set clock to 33Mhz */
+ 	if (ltq_is_ar9()) {
+@@ -190,7 +192,7 @@ static int __devinit ltq_pci_startup(struct ltq_pci_data *conf)
+ 	}
+ 
+ 	/* setup pci clock and gpis used by pci */
+-	ltq_pci_setup_gpio(conf->gpio);
++	ltq_pci_setup_gpio(dev);
+ 
+ 	/* enable auto-switching between PCI and EBU */
+ 	ltq_pci_w32(0xa, PCI_CR_CLK_CTRL);
+@@ -275,7 +277,7 @@ static int __devinit ltq_pci_probe(struct platform_device *pdev)
+ 		ioremap_nocache(LTQ_PCI_CFG_BASE, LTQ_PCI_CFG_BASE);
+ 	ltq_pci_controller.io_map_base =
+ 		(unsigned long)ioremap(LTQ_PCI_IO_BASE, LTQ_PCI_IO_SIZE - 1);
+-	ltq_pci_startup(ltq_pci_data);
++	ltq_pci_startup(&pdev->dev);
+ 	register_pci_controller(&ltq_pci_controller);
+ 
+ 	return 0;
+diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
+index daba994..ad0fa54 100644
+--- a/drivers/net/ethernet/lantiq_etop.c
++++ b/drivers/net/ethernet/lantiq_etop.c
+@@ -292,9 +292,6 @@ ltq_etop_gbit_init(void)
+ {
+ 	ltq_pmu_enable(PMU_SWITCH);
+ 
+-	ltq_gpio_request(42, 2, 1, "MDIO");
+-	ltq_gpio_request(43, 2, 1, "MDC");
+-
+ 	ltq_gbit_w32_mask(0, GCTL0_SE, LTQ_GBIT_GCTL0);
+ 	/** Disable MDIO auto polling mode */
+ 	ltq_gbit_w32_mask(0, PX_CTL_DMDIO, LTQ_GBIT_P0_CTL);
+@@ -870,6 +867,12 @@ ltq_etop_probe(struct platform_device *pdev)
+ 			err = -ENOMEM;
+ 			goto err_out;
+ 		}
++		if (ltq_gpio_request(&pdev->dev, 42, 2, 1, "MDIO") ||
++				ltq_gpio_request(&pdev->dev, 43, 2, 1, "MDC")) {
++			dev_err(&pdev->dev, "failed to request MDIO gpios\n");
++			err = -EBUSY;
++			goto err_out;
++		}
+ 	}
+ 
+ 	dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
+diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
+index 96c1cac..5d25828 100644
+--- a/drivers/tty/serial/lantiq.c
++++ b/drivers/tty/serial/lantiq.c
+@@ -107,6 +107,9 @@
+ #define ASCFSTAT_TXFREEMASK	0x3F000000
+ #define ASCFSTAT_TXFREEOFF	24
+ 
++#define MUXC_SIF_RX_PIN		112
++#define MUXC_SIF_TX_PIN		113
++
+ static void lqasc_tx_chars(struct uart_port *port);
+ static struct ltq_uart_port *lqasc_port[MAXPORTS];
+ static struct uart_driver lqasc_reg;
+@@ -529,6 +532,15 @@ lqasc_request_port(struct uart_port *port)
+ 		if (port->membase == NULL)
+ 			return -ENOMEM;
+ 	}
++	if (ltq_is_falcon() && (port->line == 1)) {
++		struct ltq_uart_port *ltq_port = lqasc_port[pdev->id];
++		if (ltq_gpio_request(&pdev->dev, MUXC_SIF_RX_PIN,
++				3, 0, "asc1-rx"))
++			return -EBUSY;
++		if (ltq_gpio_request(&pdev->dev, MUXC_SIF_TX_PIN,
++				3, 1, "asc1-tx"))
++			return -EBUSY;
++	}
+ 	return 0;
+ }
+ 
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0019-MIPS-add-clkdev.h.patch b/target/linux/lantiq/patches-3.3/0019-MIPS-add-clkdev.h.patch
new file mode 100644
index 0000000000..1cea4dd99f
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0019-MIPS-add-clkdev.h.patch
@@ -0,0 +1,49 @@
+From 7396c59a2be411a11c640d79417ff257f1b94eff Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 16 Feb 2012 20:23:36 +0100
+Subject: [PATCH 19/70] MIPS: add clkdev.h
+
+For clkdev to work on MIPS we need this file
+
+include/linux/clkdev.h:#include <asm/clkdev.h>
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/include/asm/clkdev.h |   25 +++++++++++++++++++++++++
+ 1 files changed, 25 insertions(+), 0 deletions(-)
+ create mode 100644 arch/mips/include/asm/clkdev.h
+
+diff --git a/arch/mips/include/asm/clkdev.h b/arch/mips/include/asm/clkdev.h
+new file mode 100644
+index 0000000..2624754
+--- /dev/null
++++ b/arch/mips/include/asm/clkdev.h
+@@ -0,0 +1,25 @@
++/*
++ *  based on arch/arm/include/asm/clkdev.h
++ *
++ *  Copyright (C) 2008 Russell King.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * Helper for the clk API to assist looking up a struct clk.
++ */
++#ifndef __ASM_CLKDEV_H
++#define __ASM_CLKDEV_H
++
++#include <linux/slab.h>
++
++#define __clk_get(clk)	({ 1; })
++#define __clk_put(clk)	do { } while (0)
++
++static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size)
++{
++	return kzalloc(size, GFP_KERNEL);
++}
++
++#endif
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0020-MIPS-lantiq-helper-functions-for-SoC-detection.patch b/target/linux/lantiq/patches-3.3/0020-MIPS-lantiq-helper-functions-for-SoC-detection.patch
new file mode 100644
index 0000000000..d8027da206
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0020-MIPS-lantiq-helper-functions-for-SoC-detection.patch
@@ -0,0 +1,59 @@
+From 601e5ea89b1fd6fb8047ea7c23eae6eb1c90145f Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 21 Feb 2012 14:25:03 +0100
+Subject: [PATCH 20/70] MIPS: lantiq: helper functions for SoC detection
+
+Add additional functions for runtime soc detection. We need these for the
+serial driver.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ .../include/asm/mach-lantiq/falcon/lantiq_soc.h    |   16 ++++++++++++++--
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h |    5 +++++
+ 2 files changed, 19 insertions(+), 2 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+index a5dc06a..0aa1f16 100644
+--- a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+@@ -134,8 +134,20 @@ extern int ltq_gpio_mux_set(unsigned int pin, unsigned int mux);
+ #define LTQ_EIU_BASE_ADDR	0
+ #define LTQ_EBU_PCC_ISTAT	0
+ 
+-#define ltq_is_ar9()	0
+-#define ltq_is_vr9()	0
++static inline int ltq_is_ar9(void)
++{
++	return 0;
++}
++
++static inline int ltq_is_vr9(void)
++{
++	return 0;
++}
++
++static inline int ltq_is_falcon(void)
++{
++	return 1;
++}
+ 
+ #endif /* CONFIG_SOC_FALCON */
+ #endif /* _LTQ_XWAY_H__ */
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index 6c5b705..45e480c 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -164,5 +164,10 @@ static inline int ltq_is_vr9(void)
+ 	return (ltq_get_soc_type() == SOC_TYPE_VR9);
+ }
+ 
++static inline int ltq_is_falcon(void)
++{
++	return 0;
++}
++
+ #endif /* CONFIG_SOC_TYPE_XWAY */
+ #endif /* _LTQ_XWAY_H__ */
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0021-MIPS-lantiq-convert-to-clkdev-api.patch b/target/linux/lantiq/patches-3.3/0021-MIPS-lantiq-convert-to-clkdev-api.patch
new file mode 100644
index 0000000000..5ee11a2d3f
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0021-MIPS-lantiq-convert-to-clkdev-api.patch
@@ -0,0 +1,299 @@
+From 69f1bf02b0c6b132140326320d26aa4e91bc3290 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 8 Mar 2012 08:39:06 +0100
+Subject: [PATCH 21/70] MIPS: lantiq: convert to clkdev api
+
+* Change setup from HAVE_CLK -> HAVE_MACH_CLKDEV/CLKDEV_LOOKUP
+* Add clk_activate/clk_deactivate
+* Add better error paths to the clk_*() functions
+* Change the way our static clocks are referenced
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/Kconfig                          |    3 +-
+ arch/mips/include/asm/mach-lantiq/lantiq.h |   20 ++----
+ arch/mips/lantiq/clk.c                     |   96 +++++++++++++++------------
+ arch/mips/lantiq/clk.h                     |   52 ++++++++++++++-
+ arch/mips/lantiq/prom.c                    |    1 -
+ 5 files changed, 111 insertions(+), 61 deletions(-)
+
+diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
+index 8ad52f4..df4e125 100644
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -228,7 +228,8 @@ config LANTIQ
+ 	select ARCH_REQUIRE_GPIOLIB
+ 	select SWAP_IO_SPACE
+ 	select BOOT_RAW
+-	select HAVE_CLK
++	select HAVE_MACH_CLKDEV
++	select CLKDEV_LOOKUP
+ 	select HAVE_OPROFILE
+ 	select MIPS_MACHINE
+ 
+diff --git a/arch/mips/include/asm/mach-lantiq/lantiq.h b/arch/mips/include/asm/mach-lantiq/lantiq.h
+index 924b91a..622847f 100644
+--- a/arch/mips/include/asm/mach-lantiq/lantiq.h
++++ b/arch/mips/include/asm/mach-lantiq/lantiq.h
+@@ -9,6 +9,7 @@
+ #define _LANTIQ_H__
+ 
+ #include <linux/irq.h>
++#include <linux/clk.h>
+ #include <linux/ioport.h>
+ 
+ /* generic reg access functions */
+@@ -22,18 +23,6 @@
+ extern unsigned int ltq_get_cpu_ver(void);
+ extern unsigned int ltq_get_soc_type(void);
+ 
+-/* clock speeds */
+-#define CLOCK_60M	60000000
+-#define CLOCK_83M	83333333
+-#define CLOCK_100M	100000000
+-#define CLOCK_111M	111111111
+-#define CLOCK_133M	133333333
+-#define CLOCK_167M	166666667
+-#define CLOCK_200M	200000000
+-#define CLOCK_266M	266666666
+-#define CLOCK_333M	333333333
+-#define CLOCK_400M	400000000
+-
+ /* spinlock all ebu i/o */
+ extern spinlock_t ebu_lock;
+ 
+@@ -46,6 +35,13 @@ extern void ltq_disable_irq(struct irq_data *data);
+ extern void ltq_mask_and_ack_irq(struct irq_data *data);
+ extern void ltq_enable_irq(struct irq_data *data);
+ 
++/* clock handling */
++extern int clk_activate(struct clk *clk);
++extern void clk_deactivate(struct clk *clk);
++extern struct clk *clk_get_cpu(void);
++extern struct clk *clk_get_fpi(void);
++extern struct clk *clk_get_io(void);
++
+ /* find out what caused the last cpu reset */
+ extern int ltq_reset_cause(void);
+ 
+diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c
+index 39eef7f..84a201e 100644
+--- a/arch/mips/lantiq/clk.c
++++ b/arch/mips/lantiq/clk.c
+@@ -12,6 +12,7 @@
+ #include <linux/kernel.h>
+ #include <linux/types.h>
+ #include <linux/clk.h>
++#include <linux/clkdev.h>
+ #include <linux/err.h>
+ #include <linux/list.h>
+ 
+@@ -24,33 +25,29 @@
+ #include "clk.h"
+ #include "prom.h"
+ 
+-struct clk {
+-	const char *name;
+-	unsigned long rate;
+-	unsigned long (*get_rate) (void);
+-};
++/* lantiq socs have 3 static clocks */
++static struct clk cpu_clk_generic[3];
+ 
+-static struct clk *cpu_clk;
+-static int cpu_clk_cnt;
++void clkdev_add_static(unsigned long cpu, unsigned long fpi, unsigned long io)
++{
++	cpu_clk_generic[0].rate = cpu;
++	cpu_clk_generic[1].rate = fpi;
++	cpu_clk_generic[2].rate = io;
++}
+ 
+-/* lantiq socs have 3 static clocks */
+-static struct clk cpu_clk_generic[] = {
+-	{
+-		.name = "cpu",
+-		.get_rate = ltq_get_cpu_hz,
+-	}, {
+-		.name = "fpi",
+-		.get_rate = ltq_get_fpi_hz,
+-	}, {
+-		.name = "io",
+-		.get_rate = ltq_get_io_region_clock,
+-	},
+-};
+-
+-void clk_init(void)
++struct clk *clk_get_cpu(void)
++{
++	return &cpu_clk_generic[0];
++}
++
++struct clk *clk_get_fpi(void)
+ {
+-	cpu_clk = cpu_clk_generic;
+-	cpu_clk_cnt = ARRAY_SIZE(cpu_clk_generic);
++	return &cpu_clk_generic[1];
++}
++
++struct clk *clk_get_io(void)
++{
++	return &cpu_clk_generic[2];
+ }
+ 
+ static inline int clk_good(struct clk *clk)
+@@ -73,36 +70,49 @@ unsigned long clk_get_rate(struct clk *clk)
+ }
+ EXPORT_SYMBOL(clk_get_rate);
+ 
+-struct clk *clk_get(struct device *dev, const char *id)
++int clk_enable(struct clk *clk)
+ {
+-	int i;
++	if (unlikely(!clk_good(clk)))
++		return -1;
++
++	if (clk->enable)
++		return clk->enable(clk);
+ 
+-	for (i = 0; i < cpu_clk_cnt; i++)
+-		if (!strcmp(id, cpu_clk[i].name))
+-			return &cpu_clk[i];
+-	BUG();
+-	return ERR_PTR(-ENOENT);
++	return -1;
+ }
+-EXPORT_SYMBOL(clk_get);
++EXPORT_SYMBOL(clk_enable);
+ 
+-void clk_put(struct clk *clk)
++void clk_disable(struct clk *clk)
+ {
+-	/* not used */
++	if (unlikely(!clk_good(clk)))
++		return;
++
++	if (clk->disable)
++		clk->disable(clk);
+ }
+-EXPORT_SYMBOL(clk_put);
++EXPORT_SYMBOL(clk_disable);
+ 
+-int clk_enable(struct clk *clk)
++int clk_activate(struct clk *clk)
+ {
+-	/* not used */
+-	return 0;
++	if (unlikely(!clk_good(clk)))
++		return -1;
++
++	if (clk->activate)
++		return clk->activate(clk);
++
++	return -1;
+ }
+-EXPORT_SYMBOL(clk_enable);
++EXPORT_SYMBOL(clk_activate);
+ 
+-void clk_disable(struct clk *clk)
++void clk_deactivate(struct clk *clk)
+ {
+-	/* not used */
++	if (unlikely(!clk_good(clk)))
++		return;
++
++	if (clk->deactivate)
++		clk->deactivate(clk);
+ }
+-EXPORT_SYMBOL(clk_disable);
++EXPORT_SYMBOL(clk_deactivate);
+ 
+ static inline u32 ltq_get_counter_resolution(void)
+ {
+@@ -126,7 +136,7 @@ void __init plat_time_init(void)
+ 
+ 	ltq_soc_init();
+ 
+-	clk = clk_get(0, "cpu");
++	clk = clk_get_cpu();
+ 	mips_hpt_frequency = clk_get_rate(clk) / ltq_get_counter_resolution();
+ 	write_c0_compare(read_c0_count());
+ 	pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000);
+diff --git a/arch/mips/lantiq/clk.h b/arch/mips/lantiq/clk.h
+index 3328925..d047768 100644
+--- a/arch/mips/lantiq/clk.h
++++ b/arch/mips/lantiq/clk.h
+@@ -9,10 +9,54 @@
+ #ifndef _LTQ_CLK_H__
+ #define _LTQ_CLK_H__
+ 
+-extern void clk_init(void);
++#include <linux/clkdev.h>
+ 
+-extern unsigned long ltq_get_cpu_hz(void);
+-extern unsigned long ltq_get_fpi_hz(void);
+-extern unsigned long ltq_get_io_region_clock(void);
++/* clock speeds */
++#define CLOCK_60M	60000000
++#define CLOCK_62_5M	62500000
++#define CLOCK_83M	83333333
++#define CLOCK_83_5M	83500000
++#define CLOCK_98_304M	98304000
++#define CLOCK_100M	100000000
++#define CLOCK_111M	111111111
++#define CLOCK_125M	125000000
++#define CLOCK_133M	133333333
++#define CLOCK_150M	150000000
++#define CLOCK_166M	166666666
++#define CLOCK_167M	166666667
++#define CLOCK_196_608M	196608000
++#define CLOCK_200M	200000000
++#define CLOCK_250M	250000000
++#define CLOCK_266M	266666666
++#define CLOCK_300M	300000000
++#define CLOCK_333M	333333333
++#define CLOCK_393M	393215332
++#define CLOCK_400M	400000000
++#define CLOCK_500M	500000000
++#define CLOCK_600M	600000000
++
++struct clk {
++	struct clk_lookup cl;
++	unsigned long rate;
++	unsigned long (*get_rate) (void);
++	unsigned int module;
++	unsigned int bits;
++	int (*enable) (struct clk *clk);
++	void (*disable) (struct clk *clk);
++	int (*activate) (struct clk *clk);
++	void (*deactivate) (struct clk *clk);
++	void (*reboot) (struct clk *clk);
++};
++
++extern void clkdev_add_static(unsigned long cpu, unsigned long fpi,
++					unsigned long io);
++
++extern unsigned long ltq_danube_cpu_hz(void);
++extern unsigned long ltq_danube_fpi_hz(void);
++extern unsigned long ltq_danube_io_region_clock(void);
++
++extern unsigned long ltq_vr9_cpu_hz(void);
++extern unsigned long ltq_vr9_fpi_hz(void);
++extern unsigned long ltq_vr9_io_region_clock(void);
+ 
+ #endif
+diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
+index acb8921..971554b 100644
+--- a/arch/mips/lantiq/prom.c
++++ b/arch/mips/lantiq/prom.c
+@@ -103,7 +103,6 @@ EXPORT_SYMBOL(ltq_remap_resource);
+ void __init prom_init(void)
+ {
+ 	ltq_soc_detect(&soc_info);
+-	clk_init();
+ 	snprintf(soc_info.sys_type, LTQ_SYS_TYPE_LEN - 1, "%s rev %s",
+ 		soc_info.name, soc_info.rev_type);
+ 	soc_info.sys_type[LTQ_SYS_TYPE_LEN - 1] = '\0';
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0022-MIPS-lantiq-convert-xway-to-clkdev-api.patch b/target/linux/lantiq/patches-3.3/0022-MIPS-lantiq-convert-xway-to-clkdev-api.patch
new file mode 100644
index 0000000000..790262afd4
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0022-MIPS-lantiq-convert-xway-to-clkdev-api.patch
@@ -0,0 +1,736 @@
+From de49a17fd2d9a73b9449f04061bb08eb5d73fe98 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 8 Mar 2012 11:18:22 +0100
+Subject: [PATCH 22/70] MIPS: lantiq: convert xway to clkdev api
+
+Unify xway/ase clock code and add clkdev hooks to sysctrl.c
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h |   13 --
+ arch/mips/lantiq/xway/Makefile                     |    6 +-
+ arch/mips/lantiq/xway/clk-ase.c                    |   48 ----
+ arch/mips/lantiq/xway/clk-xway.c                   |  223 -------------------
+ arch/mips/lantiq/xway/clk.c                        |  227 ++++++++++++++++++++
+ arch/mips/lantiq/xway/sysctrl.c                    |  104 ++++++++-
+ 6 files changed, 325 insertions(+), 296 deletions(-)
+ delete mode 100644 arch/mips/lantiq/xway/clk-ase.c
+ delete mode 100644 arch/mips/lantiq/xway/clk-xway.c
+ create mode 100644 arch/mips/lantiq/xway/clk.c
+
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index 45e480c..e9d2dd4 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -81,15 +81,6 @@
+ #define LTQ_PMU_BASE_ADDR	0x1F102000
+ #define LTQ_PMU_SIZE		0x1000
+ 
+-#define PMU_DMA			0x0020
+-#define PMU_EPHY		0x0080
+-#define PMU_USB			0x8041
+-#define PMU_LED			0x0800
+-#define PMU_GPT			0x1000
+-#define PMU_PPE			0x2000
+-#define PMU_FPI			0x4000
+-#define PMU_SWITCH		0x10000000
+-
+ /* ETOP - ethernet */
+ #define LTQ_ETOP_BASE_ADDR	0x1E180000
+ #define LTQ_ETOP_SIZE		0x40000
+@@ -145,10 +136,6 @@
+ extern __iomem void *ltq_ebu_membase;
+ extern __iomem void *ltq_cgu_membase;
+ 
+-extern void ltq_pmu_enable(unsigned int module);
+-extern void ltq_pmu_disable(unsigned int module);
+-extern void ltq_cgu_enable(unsigned int clk);
+-
+ static inline int ltq_is_ase(void)
+ {
+ 	return (ltq_get_soc_type() == SOC_TYPE_AMAZON_SE);
+diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
+index 6678402..4dcb96f 100644
+--- a/arch/mips/lantiq/xway/Makefile
++++ b/arch/mips/lantiq/xway/Makefile
+@@ -1,7 +1,7 @@
+-obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o
++obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o
+ 
+-obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o
+-obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o
++obj-$(CONFIG_SOC_XWAY) += prom-xway.o
++obj-$(CONFIG_SOC_AMAZON_SE) += prom-ase.o
+ 
+ obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
+ obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
+diff --git a/arch/mips/lantiq/xway/clk-ase.c b/arch/mips/lantiq/xway/clk-ase.c
+deleted file mode 100644
+index 6522583..0000000
+--- a/arch/mips/lantiq/xway/clk-ase.c
++++ /dev/null
+@@ -1,48 +0,0 @@
+-/*
+- *  This program is free software; you can redistribute it and/or modify it
+- *  under the terms of the GNU General Public License version 2 as published
+- *  by the Free Software Foundation.
+- *
+- *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+- */
+-
+-#include <linux/io.h>
+-#include <linux/export.h>
+-#include <linux/init.h>
+-#include <linux/clk.h>
+-
+-#include <asm/time.h>
+-#include <asm/irq.h>
+-#include <asm/div64.h>
+-
+-#include <lantiq_soc.h>
+-
+-/* cgu registers */
+-#define LTQ_CGU_SYS	0x0010
+-
+-unsigned int ltq_get_io_region_clock(void)
+-{
+-	return CLOCK_133M;
+-}
+-EXPORT_SYMBOL(ltq_get_io_region_clock);
+-
+-unsigned int ltq_get_fpi_bus_clock(int fpi)
+-{
+-	return CLOCK_133M;
+-}
+-EXPORT_SYMBOL(ltq_get_fpi_bus_clock);
+-
+-unsigned int ltq_get_cpu_hz(void)
+-{
+-	if (ltq_cgu_r32(LTQ_CGU_SYS) & (1 << 5))
+-		return CLOCK_266M;
+-	else
+-		return CLOCK_133M;
+-}
+-EXPORT_SYMBOL(ltq_get_cpu_hz);
+-
+-unsigned int ltq_get_fpi_hz(void)
+-{
+-	return CLOCK_133M;
+-}
+-EXPORT_SYMBOL(ltq_get_fpi_hz);
+diff --git a/arch/mips/lantiq/xway/clk-xway.c b/arch/mips/lantiq/xway/clk-xway.c
+deleted file mode 100644
+index 696b1a3..0000000
+--- a/arch/mips/lantiq/xway/clk-xway.c
++++ /dev/null
+@@ -1,223 +0,0 @@
+-/*
+- *  This program is free software; you can redistribute it and/or modify it
+- *  under the terms of the GNU General Public License version 2 as published
+- *  by the Free Software Foundation.
+- *
+- *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+- */
+-
+-#include <linux/io.h>
+-#include <linux/export.h>
+-#include <linux/init.h>
+-#include <linux/clk.h>
+-
+-#include <asm/time.h>
+-#include <asm/irq.h>
+-#include <asm/div64.h>
+-
+-#include <lantiq_soc.h>
+-
+-static unsigned int ltq_ram_clocks[] = {
+-	CLOCK_167M, CLOCK_133M, CLOCK_111M, CLOCK_83M };
+-#define DDR_HZ ltq_ram_clocks[ltq_cgu_r32(LTQ_CGU_SYS) & 0x3]
+-
+-#define BASIC_FREQUENCY_1	35328000
+-#define BASIC_FREQUENCY_2	36000000
+-#define BASIS_REQUENCY_USB	12000000
+-
+-#define GET_BITS(x, msb, lsb) \
+-	(((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
+-
+-#define LTQ_CGU_PLL0_CFG	0x0004
+-#define LTQ_CGU_PLL1_CFG	0x0008
+-#define LTQ_CGU_PLL2_CFG	0x000C
+-#define LTQ_CGU_SYS		0x0010
+-#define LTQ_CGU_UPDATE		0x0014
+-#define LTQ_CGU_IF_CLK		0x0018
+-#define LTQ_CGU_OSC_CON		0x001C
+-#define LTQ_CGU_SMD		0x0020
+-#define LTQ_CGU_CT1SR		0x0028
+-#define LTQ_CGU_CT2SR		0x002C
+-#define LTQ_CGU_PCMCR		0x0030
+-#define LTQ_CGU_PCI_CR		0x0034
+-#define LTQ_CGU_PD_PC		0x0038
+-#define LTQ_CGU_FMR		0x003C
+-
+-#define CGU_PLL0_PHASE_DIVIDER_ENABLE	\
+-	(ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 31))
+-#define CGU_PLL0_BYPASS			\
+-	(ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 30))
+-#define CGU_PLL0_CFG_DSMSEL		\
+-	(ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 28))
+-#define CGU_PLL0_CFG_FRAC_EN		\
+-	(ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 27))
+-#define CGU_PLL1_SRC			\
+-	(ltq_cgu_r32(LTQ_CGU_PLL1_CFG) & (1 << 31))
+-#define CGU_PLL2_PHASE_DIVIDER_ENABLE	\
+-	(ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & (1 << 20))
+-#define CGU_SYS_FPI_SEL			(1 << 6)
+-#define CGU_SYS_DDR_SEL			0x3
+-#define CGU_PLL0_SRC			(1 << 29)
+-
+-#define CGU_PLL0_CFG_PLLK	GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 26, 17)
+-#define CGU_PLL0_CFG_PLLN	GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 12, 6)
+-#define CGU_PLL0_CFG_PLLM	GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 5, 2)
+-#define CGU_PLL2_SRC		GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 18, 17)
+-#define CGU_PLL2_CFG_INPUT_DIV	GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 16, 13)
+-
+-static unsigned int ltq_get_pll0_fdiv(void);
+-
+-static inline unsigned int get_input_clock(int pll)
+-{
+-	switch (pll) {
+-	case 0:
+-		if (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & CGU_PLL0_SRC)
+-			return BASIS_REQUENCY_USB;
+-		else if (CGU_PLL0_PHASE_DIVIDER_ENABLE)
+-			return BASIC_FREQUENCY_1;
+-		else
+-			return BASIC_FREQUENCY_2;
+-	case 1:
+-		if (CGU_PLL1_SRC)
+-			return BASIS_REQUENCY_USB;
+-		else if (CGU_PLL0_PHASE_DIVIDER_ENABLE)
+-			return BASIC_FREQUENCY_1;
+-		else
+-			return BASIC_FREQUENCY_2;
+-	case 2:
+-		switch (CGU_PLL2_SRC) {
+-		case 0:
+-			return ltq_get_pll0_fdiv();
+-		case 1:
+-			return CGU_PLL2_PHASE_DIVIDER_ENABLE ?
+-				BASIC_FREQUENCY_1 :
+-				BASIC_FREQUENCY_2;
+-		case 2:
+-			return BASIS_REQUENCY_USB;
+-		}
+-	default:
+-		return 0;
+-	}
+-}
+-
+-static inline unsigned int cal_dsm(int pll, unsigned int num, unsigned int den)
+-{
+-	u64 res, clock = get_input_clock(pll);
+-
+-	res = num * clock;
+-	do_div(res, den);
+-	return res;
+-}
+-
+-static inline unsigned int mash_dsm(int pll, unsigned int M, unsigned int N,
+-	unsigned int K)
+-{
+-	unsigned int num = ((N + 1) << 10) + K;
+-	unsigned int den = (M + 1) << 10;
+-
+-	return cal_dsm(pll, num, den);
+-}
+-
+-static inline unsigned int ssff_dsm_1(int pll, unsigned int M, unsigned int N,
+-	unsigned int K)
+-{
+-	unsigned int num = ((N + 1) << 11) + K + 512;
+-	unsigned int den = (M + 1) << 11;
+-
+-	return cal_dsm(pll, num, den);
+-}
+-
+-static inline unsigned int ssff_dsm_2(int pll, unsigned int M, unsigned int N,
+-	unsigned int K)
+-{
+-	unsigned int num = K >= 512 ?
+-		((N + 1) << 12) + K - 512 : ((N + 1) << 12) + K + 3584;
+-	unsigned int den = (M + 1) << 12;
+-
+-	return cal_dsm(pll, num, den);
+-}
+-
+-static inline unsigned int dsm(int pll, unsigned int M, unsigned int N,
+-	unsigned int K, unsigned int dsmsel, unsigned int phase_div_en)
+-{
+-	if (!dsmsel)
+-		return mash_dsm(pll, M, N, K);
+-	else if (!phase_div_en)
+-		return mash_dsm(pll, M, N, K);
+-	else
+-		return ssff_dsm_2(pll, M, N, K);
+-}
+-
+-static inline unsigned int ltq_get_pll0_fosc(void)
+-{
+-	if (CGU_PLL0_BYPASS)
+-		return get_input_clock(0);
+-	else
+-		return !CGU_PLL0_CFG_FRAC_EN
+-			? dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN, 0,
+-				CGU_PLL0_CFG_DSMSEL,
+-				CGU_PLL0_PHASE_DIVIDER_ENABLE)
+-			: dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN,
+-				CGU_PLL0_CFG_PLLK, CGU_PLL0_CFG_DSMSEL,
+-				CGU_PLL0_PHASE_DIVIDER_ENABLE);
+-}
+-
+-static unsigned int ltq_get_pll0_fdiv(void)
+-{
+-	unsigned int div = CGU_PLL2_CFG_INPUT_DIV + 1;
+-
+-	return (ltq_get_pll0_fosc() + (div >> 1)) / div;
+-}
+-
+-unsigned int ltq_get_io_region_clock(void)
+-{
+-	unsigned int ret = ltq_get_pll0_fosc();
+-
+-	switch (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & CGU_SYS_DDR_SEL) {
+-	default:
+-	case 0:
+-		return (ret + 1) / 2;
+-	case 1:
+-		return (ret * 2 + 2) / 5;
+-	case 2:
+-		return (ret + 1) / 3;
+-	case 3:
+-		return (ret + 2) / 4;
+-	}
+-}
+-EXPORT_SYMBOL(ltq_get_io_region_clock);
+-
+-unsigned int ltq_get_fpi_bus_clock(int fpi)
+-{
+-	unsigned int ret = ltq_get_io_region_clock();
+-
+-	if ((fpi == 2) && (ltq_cgu_r32(LTQ_CGU_SYS) & CGU_SYS_FPI_SEL))
+-		ret >>= 1;
+-	return ret;
+-}
+-EXPORT_SYMBOL(ltq_get_fpi_bus_clock);
+-
+-unsigned int ltq_get_cpu_hz(void)
+-{
+-	switch (ltq_cgu_r32(LTQ_CGU_SYS) & 0xc) {
+-	case 0:
+-		return CLOCK_333M;
+-	case 4:
+-		return DDR_HZ;
+-	case 8:
+-		return DDR_HZ << 1;
+-	default:
+-		return DDR_HZ >> 1;
+-	}
+-}
+-EXPORT_SYMBOL(ltq_get_cpu_hz);
+-
+-unsigned int ltq_get_fpi_hz(void)
+-{
+-	unsigned int ddr_clock = DDR_HZ;
+-
+-	if (ltq_cgu_r32(LTQ_CGU_SYS) & 0x40)
+-		return ddr_clock >> 1;
+-	return ddr_clock;
+-}
+-EXPORT_SYMBOL(ltq_get_fpi_hz);
+diff --git a/arch/mips/lantiq/xway/clk.c b/arch/mips/lantiq/xway/clk.c
+new file mode 100644
+index 0000000..f3b50fc
+--- /dev/null
++++ b/arch/mips/lantiq/xway/clk.c
+@@ -0,0 +1,227 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/io.h>
++#include <linux/export.h>
++#include <linux/init.h>
++#include <linux/clk.h>
++
++#include <asm/time.h>
++#include <asm/irq.h>
++#include <asm/div64.h>
++
++#include <lantiq_soc.h>
++
++#include "../clk.h"
++
++static unsigned int ltq_ram_clocks[] = {
++	CLOCK_167M, CLOCK_133M, CLOCK_111M, CLOCK_83M };
++#define DDR_HZ ltq_ram_clocks[ltq_cgu_r32(LTQ_CGU_SYS) & 0x3]
++
++#define BASIC_FREQUENCY_1	35328000
++#define BASIC_FREQUENCY_2	36000000
++#define BASIS_REQUENCY_USB	12000000
++
++#define GET_BITS(x, msb, lsb) \
++	(((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
++
++/* legacy xway clock */
++#define LTQ_CGU_PLL0_CFG	0x0004
++#define LTQ_CGU_PLL1_CFG	0x0008
++#define LTQ_CGU_PLL2_CFG	0x000C
++#define LTQ_CGU_SYS		0x0010
++#define LTQ_CGU_UPDATE		0x0014
++#define LTQ_CGU_IF_CLK		0x0018
++#define LTQ_CGU_OSC_CON		0x001C
++#define LTQ_CGU_SMD		0x0020
++#define LTQ_CGU_CT1SR		0x0028
++#define LTQ_CGU_CT2SR		0x002C
++#define LTQ_CGU_PCMCR		0x0030
++#define LTQ_CGU_PCI_CR		0x0034
++#define LTQ_CGU_PD_PC		0x0038
++#define LTQ_CGU_FMR		0x003C
++
++#define CGU_PLL0_PHASE_DIVIDER_ENABLE	\
++	(ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 31))
++#define CGU_PLL0_BYPASS			\
++	(ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 30))
++#define CGU_PLL0_CFG_DSMSEL		\
++	(ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 28))
++#define CGU_PLL0_CFG_FRAC_EN		\
++	(ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 27))
++#define CGU_PLL1_SRC			\
++	(ltq_cgu_r32(LTQ_CGU_PLL1_CFG) & (1 << 31))
++#define CGU_PLL2_PHASE_DIVIDER_ENABLE	\
++	(ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & (1 << 20))
++#define CGU_SYS_FPI_SEL			(1 << 6)
++#define CGU_SYS_DDR_SEL			0x3
++#define CGU_PLL0_SRC			(1 << 29)
++
++#define CGU_PLL0_CFG_PLLK	GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 26, 17)
++#define CGU_PLL0_CFG_PLLN	GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 12, 6)
++#define CGU_PLL0_CFG_PLLM	GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 5, 2)
++#define CGU_PLL2_SRC		GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 18, 17)
++#define CGU_PLL2_CFG_INPUT_DIV	GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 16, 13)
++
++/* vr9 clock */
++#define LTQ_CGU_SYS_VR9	0x0c
++#define LTQ_CGU_IF_CLK_VR9	0x24
++
++
++static unsigned int ltq_get_pll0_fdiv(void);
++
++static inline unsigned int get_input_clock(int pll)
++{
++	switch (pll) {
++	case 0:
++		if (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & CGU_PLL0_SRC)
++			return BASIS_REQUENCY_USB;
++		else if (CGU_PLL0_PHASE_DIVIDER_ENABLE)
++			return BASIC_FREQUENCY_1;
++		else
++			return BASIC_FREQUENCY_2;
++	case 1:
++		if (CGU_PLL1_SRC)
++			return BASIS_REQUENCY_USB;
++		else if (CGU_PLL0_PHASE_DIVIDER_ENABLE)
++			return BASIC_FREQUENCY_1;
++		else
++			return BASIC_FREQUENCY_2;
++	case 2:
++		switch (CGU_PLL2_SRC) {
++		case 0:
++			return ltq_get_pll0_fdiv();
++		case 1:
++			return CGU_PLL2_PHASE_DIVIDER_ENABLE ?
++				BASIC_FREQUENCY_1 :
++				BASIC_FREQUENCY_2;
++		case 2:
++			return BASIS_REQUENCY_USB;
++		}
++	default:
++		return 0;
++	}
++}
++
++static inline unsigned int cal_dsm(int pll, unsigned int num, unsigned int den)
++{
++	u64 res, clock = get_input_clock(pll);
++
++	res = num * clock;
++	do_div(res, den);
++	return res;
++}
++
++static inline unsigned int mash_dsm(int pll, unsigned int M, unsigned int N,
++	unsigned int K)
++{
++	unsigned int num = ((N + 1) << 10) + K;
++	unsigned int den = (M + 1) << 10;
++
++	return cal_dsm(pll, num, den);
++}
++
++static inline unsigned int ssff_dsm_1(int pll, unsigned int M, unsigned int N,
++	unsigned int K)
++{
++	unsigned int num = ((N + 1) << 11) + K + 512;
++	unsigned int den = (M + 1) << 11;
++
++	return cal_dsm(pll, num, den);
++}
++
++static inline unsigned int ssff_dsm_2(int pll, unsigned int M, unsigned int N,
++	unsigned int K)
++{
++	unsigned int num = K >= 512 ?
++		((N + 1) << 12) + K - 512 : ((N + 1) << 12) + K + 3584;
++	unsigned int den = (M + 1) << 12;
++
++	return cal_dsm(pll, num, den);
++}
++
++static inline unsigned int dsm(int pll, unsigned int M, unsigned int N,
++	unsigned int K, unsigned int dsmsel, unsigned int phase_div_en)
++{
++	if (!dsmsel)
++		return mash_dsm(pll, M, N, K);
++	else if (!phase_div_en)
++		return mash_dsm(pll, M, N, K);
++	else
++		return ssff_dsm_2(pll, M, N, K);
++}
++
++static inline unsigned int ltq_get_pll0_fosc(void)
++{
++	if (CGU_PLL0_BYPASS)
++		return get_input_clock(0);
++	else
++		return !CGU_PLL0_CFG_FRAC_EN
++			? dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN, 0,
++				CGU_PLL0_CFG_DSMSEL,
++				CGU_PLL0_PHASE_DIVIDER_ENABLE)
++			: dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN,
++				CGU_PLL0_CFG_PLLK, CGU_PLL0_CFG_DSMSEL,
++				CGU_PLL0_PHASE_DIVIDER_ENABLE);
++}
++
++static unsigned int ltq_get_pll0_fdiv(void)
++{
++	unsigned int div = CGU_PLL2_CFG_INPUT_DIV + 1;
++
++	return (ltq_get_pll0_fosc() + (div >> 1)) / div;
++}
++
++unsigned long ltq_danube_io_region_clock(void)
++{
++	unsigned int ret = ltq_get_pll0_fosc();
++
++	switch (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & CGU_SYS_DDR_SEL) {
++	default:
++	case 0:
++		return (ret + 1) / 2;
++	case 1:
++		return (ret * 2 + 2) / 5;
++	case 2:
++		return (ret + 1) / 3;
++	case 3:
++		return (ret + 2) / 4;
++	}
++}
++
++unsigned long ltq_danube_fpi_bus_clock(int fpi)
++{
++	unsigned long ret = ltq_danube_io_region_clock();
++
++	if ((fpi == 2) && (ltq_cgu_r32(LTQ_CGU_SYS) & CGU_SYS_FPI_SEL))
++		ret >>= 1;
++	return ret;
++}
++
++unsigned long ltq_danube_cpu_hz(void)
++{
++	switch (ltq_cgu_r32(LTQ_CGU_SYS) & 0xc) {
++	case 0:
++		return CLOCK_333M;
++	case 4:
++		return DDR_HZ;
++	case 8:
++		return DDR_HZ << 1;
++	default:
++		return DDR_HZ >> 1;
++	}
++}
++
++unsigned long ltq_danube_fpi_hz(void)
++{
++	unsigned long ddr_clock = DDR_HZ;
++
++	if (ltq_cgu_r32(LTQ_CGU_SYS) & 0x40)
++		return ddr_clock >> 1;
++	return ddr_clock;
++}
+diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
+index 8fd13a1..c5782b5 100644
+--- a/arch/mips/lantiq/xway/sysctrl.c
++++ b/arch/mips/lantiq/xway/sysctrl.c
+@@ -8,17 +8,48 @@
+ 
+ #include <linux/ioport.h>
+ #include <linux/export.h>
++#include <linux/clkdev.h>
+ 
+ #include <lantiq_soc.h>
+ 
++#include "../clk.h"
+ #include "../devices.h"
+ 
+ /* clock control register */
+ #define LTQ_CGU_IFCCR	0x0018
++/* system clock register */
++#define LTQ_CGU_SYS     0x0010
+ 
+ /* the enable / disable registers */
+ #define LTQ_PMU_PWDCR	0x1C
+ #define LTQ_PMU_PWDSR	0x20
++#define LTQ_PMU_PWDCR1	0x24
++#define LTQ_PMU_PWDSR1	0x28
++
++#define PWDCR(x) ((x) ? (LTQ_PMU_PWDCR1) : (LTQ_PMU_PWDCR))
++#define PWDSR(x) ((x) ? (LTQ_PMU_PWDSR1) : (LTQ_PMU_PWDSR))
++
++/* CGU - clock generation unit */
++#define CGU_EPHY		0x10
++
++/* PMU - power management unit */
++#define PMU_DMA			0x0020
++#define PMU_SPI			0x0100
++#define PMU_EPHY		0x0080
++#define PMU_USB			0x8041
++#define PMU_STP			0x0800
++#define PMU_GPT			0x1000
++#define PMU_PPE			0x2000
++#define PMU_FPI			0x4000
++#define PMU_SWITCH		0x10000000
++#define PMU_AHBS		0x2000
++#define PMU_AHBM		0x8000
++#define PMU_PCIE_CLK            0x80000000
++
++#define PMU1_PCIE_PHY		0x0001
++#define PMU1_PCIE_CTL		0x0002
++#define PMU1_PCIE_MSI		0x0020
++#define PMU1_PCIE_PDI		0x0010
+ 
+ #define ltq_pmu_w32(x, y)	ltq_w32((x), ltq_pmu_membase + (y))
+ #define ltq_pmu_r32(x)		ltq_r32(ltq_pmu_membase + (x))
+@@ -36,28 +67,64 @@ void __iomem *ltq_cgu_membase;
+ void __iomem *ltq_ebu_membase;
+ static void __iomem *ltq_pmu_membase;
+ 
+-void ltq_cgu_enable(unsigned int clk)
++static int ltq_cgu_enable(struct clk *clk)
+ {
+-	ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | clk, LTQ_CGU_IFCCR);
++	ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | clk->bits, LTQ_CGU_IFCCR);
++	return 0;
+ }
+ 
+-void ltq_pmu_enable(unsigned int module)
++static void ltq_cgu_disable(struct clk *clk)
++{
++	ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~clk->bits, LTQ_CGU_IFCCR);
++}
++
++static int ltq_pmu_enable(struct clk *clk)
+ {
+ 	int err = 1000000;
+ 
+-	ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) & ~module, LTQ_PMU_PWDCR);
+-	do {} while (--err && (ltq_pmu_r32(LTQ_PMU_PWDSR) & module));
++	ltq_pmu_w32(ltq_pmu_r32(PWDCR(clk->module)) & ~clk->bits,
++		PWDCR(clk->module));
++	do {} while (--err && (ltq_pmu_r32(PWDSR(clk->module)) & clk->bits));
+ 
+ 	if (!err)
+ 		panic("activating PMU module failed!\n");
++
++	return 0;
+ }
+-EXPORT_SYMBOL(ltq_pmu_enable);
+ 
+-void ltq_pmu_disable(unsigned int module)
++static void ltq_pmu_disable(struct clk *clk)
+ {
+-	ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) | module, LTQ_PMU_PWDCR);
++	ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) | clk->bits, LTQ_PMU_PWDCR);
++}
++
++static inline void clkdev_add_pmu(const char *dev, const char *con,
++					unsigned int module, unsigned int bits)
++{
++	struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
++
++	clk->cl.dev_id = dev;
++	clk->cl.con_id = con;
++	clk->cl.clk = clk;
++	clk->enable = ltq_pmu_enable;
++	clk->disable = ltq_pmu_disable;
++	clk->module = module;
++	clk->bits = bits;
++	clkdev_add(&clk->cl);
++}
++
++static inline void clkdev_add_cgu(const char *dev, const char *con,
++					unsigned int bits)
++{
++	struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
++
++	clk->cl.dev_id = dev;
++	clk->cl.con_id = con;
++	clk->cl.clk = clk;
++	clk->enable = ltq_cgu_enable;
++	clk->disable = ltq_cgu_disable;
++	clk->bits = bits;
++	clkdev_add(&clk->cl);
+ }
+-EXPORT_SYMBOL(ltq_pmu_disable);
+ 
+ void __init ltq_soc_init(void)
+ {
+@@ -75,4 +142,23 @@ void __init ltq_soc_init(void)
+ 
+ 	/* make sure to unprotect the memory region where flash is located */
+ 	ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0);
++
++	/* add our clocks */
++	clkdev_add_pmu("ltq_dma", NULL, 0, PMU_DMA);
++	clkdev_add_pmu("ltq_stp", NULL, 0, PMU_STP);
++	clkdev_add_pmu("ltq_spi", NULL, 0, PMU_SPI);
++	clkdev_add_pmu("ltq_etop", NULL, 0, PMU_PPE);
++	if (ltq_is_ase()) {
++		if (ltq_cgu_r32(LTQ_CGU_SYS) & (1 << 5))
++			clkdev_add_static(CLOCK_266M, CLOCK_133M, CLOCK_133M);
++		else
++			clkdev_add_static(CLOCK_133M, CLOCK_133M, CLOCK_133M);
++		clkdev_add_cgu("ltq_etop", "ephycgu", CGU_EPHY),
++		clkdev_add_pmu("ltq_etop", "ephy", 0, PMU_EPHY);
++	} else {
++		clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
++					ltq_danube_io_region_clock());
++		if (ltq_is_ar9())
++			clkdev_add_pmu("ltq_etop", "switch", 0, PMU_SWITCH);
++	}
+ }
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0023-MIPS-lantiq-convert-falcon-to-clkdev-api.patch b/target/linux/lantiq/patches-3.3/0023-MIPS-lantiq-convert-falcon-to-clkdev-api.patch
new file mode 100644
index 0000000000..27660861c2
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0023-MIPS-lantiq-convert-falcon-to-clkdev-api.patch
@@ -0,0 +1,244 @@
+From c87a0c58116b2b2d8ccee9bb64df652b563307c4 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 8 Mar 2012 11:19:11 +0100
+Subject: [PATCH 23/70] MIPS: lantiq: convert falcon to clkdev api
+
+Unify sysctrl/clock code and add clkdev hooks to sysctrl.c
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ .../include/asm/mach-lantiq/falcon/lantiq_soc.h    |    8 +-
+ arch/mips/lantiq/falcon/Makefile                   |    2 +-
+ arch/mips/lantiq/falcon/sysctrl.c                  |  129 ++++++++++++--------
+ 3 files changed, 80 insertions(+), 59 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+index 0aa1f16..120c56c 100644
+--- a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+@@ -95,6 +95,7 @@
+ 
+ /* Activation Status Register */
+ #define ACTS_ASC1_ACT	0x00000800
++#define ACTS_I2C_ACT	0x00004000
+ #define ACTS_P0		0x00010000
+ #define ACTS_P1		0x00010000
+ #define ACTS_P2		0x00020000
+@@ -106,13 +107,6 @@
+ #define ACTS_PADCTRL3	0x00200000
+ #define ACTS_PADCTRL4	0x00400000
+ 
+-extern void ltq_sysctl_activate(int module, unsigned int mask);
+-extern void ltq_sysctl_deactivate(int module, unsigned int mask);
+-extern void ltq_sysctl_clken(int module, unsigned int mask);
+-extern void ltq_sysctl_clkdis(int module, unsigned int mask);
+-extern void ltq_sysctl_reboot(int module, unsigned int mask);
+-extern int ltq_gpe_is_activated(unsigned int mask);
+-
+ /* global register ranges */
+ extern __iomem void *ltq_ebu_membase;
+ extern __iomem void *ltq_sys1_membase;
+diff --git a/arch/mips/lantiq/falcon/Makefile b/arch/mips/lantiq/falcon/Makefile
+index 56b22eb..3634154 100644
+--- a/arch/mips/lantiq/falcon/Makefile
++++ b/arch/mips/lantiq/falcon/Makefile
+@@ -1,2 +1,2 @@
+-obj-y := clk.o prom.o reset.o sysctrl.o devices.o gpio.o
++obj-y := prom.o reset.o sysctrl.o devices.o gpio.o
+ obj-$(CONFIG_LANTIQ_MACH_EASY98000) += mach-easy98000.o
+diff --git a/arch/mips/lantiq/falcon/sysctrl.c b/arch/mips/lantiq/falcon/sysctrl.c
+index 905a142..900f0e5 100644
+--- a/arch/mips/lantiq/falcon/sysctrl.c
++++ b/arch/mips/lantiq/falcon/sysctrl.c
+@@ -9,11 +9,13 @@
+ 
+ #include <linux/ioport.h>
+ #include <linux/export.h>
++#include <linux/clkdev.h>
+ #include <asm/delay.h>
+ 
+ #include <lantiq_soc.h>
+ 
+ #include "devices.h"
++#include "../clk.h"
+ 
+ /* infrastructure control register */
+ #define SYS1_INFRAC		0x00bc
+@@ -38,6 +40,10 @@
+ #define LTQ_SYSCTL_DEACT	0x0028
+ /* reboot Register */
+ #define LTQ_SYSCTL_RBT		0x002c
++/* CPU0 Clock Control Register */
++#define LTQ_SYS1_CPU0CC         0x0040
++/* clock divider bit */
++#define LTQ_CPU0CC_CPUDIV       0x0001
+ 
+ static struct resource ltq_sysctl_res[] = {
+ 	MEM_RES("sys1", LTQ_SYS1_BASE_ADDR, LTQ_SYS1_SIZE),
+@@ -64,79 +70,67 @@ void __iomem *ltq_ebu_membase;
+ #define ltq_status_r32(x)	ltq_r32(ltq_status_membase + (x))
+ 
+ static inline void
+-ltq_sysctl_wait(int module, unsigned int mask,
++ltq_sysctl_wait(struct clk *clk,
+ 		unsigned int test, unsigned int reg)
+ {
+ 	int err = 1000000;
+ 
+-	do {} while (--err && ((ltq_reg_r32(module, reg)
+-					& mask) != test));
++	do {} while (--err && ((ltq_reg_r32(clk->module, reg)
++					& clk->bits) != test));
+ 	if (!err)
+-		pr_err("module de/activation failed %d %08X %08X\n",
+-							module, mask, test);
++		pr_err("module de/activation failed %d %08X %08X %08X\n",
++				clk->module, clk->bits, test,
++				ltq_reg_r32(clk->module, reg) & clk->bits);
+ }
+ 
+-void
+-ltq_sysctl_activate(int module, unsigned int mask)
++static int
++ltq_sysctl_activate(struct clk *clk)
+ {
+-	if (module > SYSCTL_SYSGPE)
+-		return;
+-
+-	ltq_reg_w32(module, mask, LTQ_SYSCTL_CLKEN);
+-	ltq_reg_w32(module, mask, LTQ_SYSCTL_ACT);
+-	ltq_sysctl_wait(module, mask, mask, LTQ_SYSCTL_ACTS);
++	ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_CLKEN);
++	ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_ACT);
++	ltq_sysctl_wait(clk, clk->bits, LTQ_SYSCTL_ACTS);
++	return 0;
+ }
+-EXPORT_SYMBOL(ltq_sysctl_activate);
+ 
+-void
+-ltq_sysctl_deactivate(int module, unsigned int mask)
++static void
++ltq_sysctl_deactivate(struct clk *clk)
+ {
+-	if (module > SYSCTL_SYSGPE)
+-		return;
+-
+-	ltq_reg_w32(module, mask, LTQ_SYSCTL_CLKCLR);
+-	ltq_reg_w32(module, mask, LTQ_SYSCTL_DEACT);
+-	ltq_sysctl_wait(module, mask, 0, LTQ_SYSCTL_ACTS);
++	ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_CLKCLR);
++	ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_DEACT);
++	ltq_sysctl_wait(clk, 0, LTQ_SYSCTL_ACTS);
+ }
+-EXPORT_SYMBOL(ltq_sysctl_deactivate);
+ 
+-void
+-ltq_sysctl_clken(int module, unsigned int mask)
++static int
++ltq_sysctl_clken(struct clk *clk)
+ {
+-	if (module > SYSCTL_SYSGPE)
+-		return;
+-
+-	ltq_reg_w32(module, mask, LTQ_SYSCTL_CLKEN);
+-	ltq_sysctl_wait(module, mask, mask, LTQ_SYSCTL_CLKS);
++	ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_CLKEN);
++	ltq_sysctl_wait(clk, clk->bits, LTQ_SYSCTL_CLKS);
++	return 0;
+ }
+-EXPORT_SYMBOL(ltq_sysctl_clken);
+ 
+-void
+-ltq_sysctl_clkdis(int module, unsigned int mask)
++static void
++ltq_sysctl_clkdis(struct clk *clk)
+ {
+-	if (module > SYSCTL_SYSGPE)
+-		return;
+-
+-	ltq_reg_w32(module, mask, LTQ_SYSCTL_CLKCLR);
+-	ltq_sysctl_wait(module, mask, 0, LTQ_SYSCTL_CLKS);
++	ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_CLKCLR);
++	ltq_sysctl_wait(clk, 0, LTQ_SYSCTL_CLKS);
+ }
+-EXPORT_SYMBOL(ltq_sysctl_clkdis);
+ 
+-void
+-ltq_sysctl_reboot(int module, unsigned int mask)
++static void
++ltq_sysctl_reboot(struct clk *clk)
+ {
+ 	unsigned int act;
+-
+-	if (module > SYSCTL_SYSGPE)
+-		return;
+-
+-	act = ltq_reg_r32(module, LTQ_SYSCTL_ACT);
+-	if ((~act & mask) != 0)
+-		ltq_sysctl_activate(module, ~act & mask);
+-	ltq_reg_w32(module, act & mask, LTQ_SYSCTL_RBT);
+-	ltq_sysctl_wait(module, mask, mask, LTQ_SYSCTL_ACTS);
++	unsigned int bits;
++
++	act = ltq_reg_r32(clk->module, LTQ_SYSCTL_ACT);
++	bits = ~act & clk->bits;
++	if (bits != 0) {
++		ltq_reg_w32(clk->module, bits, LTQ_SYSCTL_CLKEN);
++		ltq_reg_w32(clk->module, bits, LTQ_SYSCTL_ACT);
++		ltq_sysctl_wait(clk, bits, LTQ_SYSCTL_ACTS);
++	}
++	ltq_reg_w32(clk->module, act & clk->bits, LTQ_SYSCTL_RBT);
++	ltq_sysctl_wait(clk, clk->bits, LTQ_SYSCTL_ACTS);
+ }
+-EXPORT_SYMBOL(ltq_sysctl_reboot);
+ 
+ /* enable the ONU core */
+ static void
+@@ -167,6 +161,24 @@ ltq_gpe_enable(void)
+ 	udelay(1);
+ }
+ 
++static inline void
++clkdev_add_sys(const char *dev, unsigned int module,
++				unsigned int bits)
++{
++	struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
++
++	clk->cl.dev_id = dev;
++	clk->cl.con_id = NULL;
++	clk->cl.clk = clk;
++	clk->module = module;
++	clk->activate = ltq_sysctl_activate;
++	clk->deactivate = ltq_sysctl_deactivate;
++	clk->enable = ltq_sysctl_clken;
++	clk->disable = ltq_sysctl_clkdis;
++	clk->reboot = ltq_sysctl_reboot;
++	clkdev_add(&clk->cl);
++}
++
+ void __init
+ ltq_soc_init(void)
+ {
+@@ -180,4 +192,19 @@ ltq_soc_init(void)
+ 	ltq_ebu_membase = ltq_remap_resource(&ltq_ebu_res);
+ 
+ 	ltq_gpe_enable();
++
++	/* get our 3 static rates for cpu, fpi and io clocks */
++	if (ltq_sys1_r32(LTQ_SYS1_CPU0CC) & LTQ_CPU0CC_CPUDIV)
++		clkdev_add_static(CLOCK_200M, CLOCK_100M, CLOCK_200M);
++	else
++		clkdev_add_static(CLOCK_400M, CLOCK_100M, CLOCK_200M);
++
++	/* add our clock domains */
++	clkdev_add_sys("falcon_gpio.0", SYSCTL_SYSETH, ACTS_PADCTRL0 | ACTS_P0);
++	clkdev_add_sys("falcon_gpio.1", SYSCTL_SYS1, ACTS_PADCTRL1 | ACTS_P1);
++	clkdev_add_sys("falcon_gpio.2", SYSCTL_SYSETH, ACTS_PADCTRL2 | ACTS_P2);
++	clkdev_add_sys("falcon_gpio.3", SYSCTL_SYS1, ACTS_PADCTRL3 | ACTS_P3);
++	clkdev_add_sys("falcon_gpio.4", SYSCTL_SYS1, ACTS_PADCTRL4 | ACTS_P4);
++	clkdev_add_sys("ltq_asc.1", SYSCTL_SYS1, ACTS_ASC1_ACT);
++	clkdev_add_sys("falcon_i2c", SYSCTL_SYS1, ACTS_I2C_ACT);
+ }
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0024-MIPS-lantiq-convert-dma-driver-to-clkdev-api.patch b/target/linux/lantiq/patches-3.3/0024-MIPS-lantiq-convert-dma-driver-to-clkdev-api.patch
new file mode 100644
index 0000000000..356924f243
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0024-MIPS-lantiq-convert-dma-driver-to-clkdev-api.patch
@@ -0,0 +1,65 @@
+From d5904c1dd985d1e0944dd249927ad19c8522a943 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 8 Mar 2012 11:21:08 +0100
+Subject: [PATCH 24/70] MIPS: lantiq: convert dma driver to clkdev api
+
+Update from old pmu_{dis,en}able() to ckldev api.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/lantiq/xway/Makefile.rej |   11 +++++++++++
+ arch/mips/lantiq/xway/dma.c        |    6 +++++-
+ 2 files changed, 16 insertions(+), 1 deletions(-)
+ create mode 100644 arch/mips/lantiq/xway/Makefile.rej
+
+diff --git a/arch/mips/lantiq/xway/Makefile.rej b/arch/mips/lantiq/xway/Makefile.rej
+new file mode 100644
+index 0000000..c0d5b52
+--- /dev/null
++++ b/arch/mips/lantiq/xway/Makefile.rej
+@@ -0,0 +1,11 @@
++--- arch/mips/lantiq/xway/Makefile
+++++ arch/mips/lantiq/xway/Makefile
++@@ -1,7 +1,4 @@
++-obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o
++-
++-obj-$(CONFIG_SOC_XWAY) += prom-xway.o
++-obj-$(CONFIG_SOC_AMAZON_SE) += prom-ase.o
+++obj-y := prom.o sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o
++ 
++ obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
++ obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
+diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
+index 6cf883b..ce86529 100644
+--- a/arch/mips/lantiq/xway/dma.c
++++ b/arch/mips/lantiq/xway/dma.c
+@@ -20,6 +20,7 @@
+ #include <linux/io.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/export.h>
++#include <linux/clk.h>
+ 
+ #include <lantiq_soc.h>
+ #include <xway_dma.h>
+@@ -216,6 +217,7 @@ EXPORT_SYMBOL_GPL(ltq_dma_init_port);
+ int __init
+ ltq_dma_init(void)
+ {
++	struct clk *clk;
+ 	int i;
+ 
+ 	/* remap dma register range */
+@@ -224,7 +226,9 @@ ltq_dma_init(void)
+ 		panic("Failed to remap dma memory");
+ 
+ 	/* power up and reset the dma engine */
+-	ltq_pmu_enable(PMU_DMA);
++	clk = clk_get_sys("ltq_dma", NULL);
++	WARN_ON(!clk);
++	clk_enable(clk);
+ 	ltq_dma_w32_mask(0, DMA_RESET, LTQ_DMA_CTRL);
+ 
+ 	/* disable all interrupts */
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0025-MIPS-lantiq-convert-gpio_stp-driver-to-clkdev-api.patch b/target/linux/lantiq/patches-3.3/0025-MIPS-lantiq-convert-gpio_stp-driver-to-clkdev-api.patch
new file mode 100644
index 0000000000..baef8c55a5
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0025-MIPS-lantiq-convert-gpio_stp-driver-to-clkdev-api.patch
@@ -0,0 +1,60 @@
+From b4c30090220ae84e03e35363fc2dc6cf3e4b00ed Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 8 Mar 2012 11:21:33 +0100
+Subject: [PATCH 25/70] MIPS: lantiq: convert gpio_stp driver to clkdev api
+
+Update from old pmu_{dis,en}able() to ckldev api.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/lantiq/xway/gpio_stp.c |   12 +++++++++---
+ 1 files changed, 9 insertions(+), 3 deletions(-)
+
+diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c
+index e6b4809..da91c5e 100644
+--- a/arch/mips/lantiq/xway/gpio_stp.c
++++ b/arch/mips/lantiq/xway/gpio_stp.c
+@@ -15,6 +15,8 @@
+ #include <linux/mutex.h>
+ #include <linux/io.h>
+ #include <linux/gpio.h>
++#include <linux/clk.h>
++#include <linux/err.h>
+ 
+ #include <lantiq_soc.h>
+ 
+@@ -78,8 +80,10 @@ static struct gpio_chip ltq_stp_chip = {
+ 	.owner = THIS_MODULE,
+ };
+ 
+-static int ltq_stp_hw_init(void)
++static int ltq_stp_hw_init(struct device *dev)
+ {
++	struct clk *clk;
++
+ 	/* sane defaults */
+ 	ltq_stp_w32(0, LTQ_STP_AR);
+ 	ltq_stp_w32(0, LTQ_STP_CPU0);
+@@ -105,7 +109,9 @@ static int ltq_stp_hw_init(void)
+ 	 */
+ 	ltq_stp_w32_mask(0, LTQ_STP_ADSL_SRC, LTQ_STP_CON0);
+ 
+-	ltq_pmu_enable(PMU_LED);
++	clk = clk_get(dev, NULL);
++	WARN_ON(IS_ERR(clk));
++	clk_enable(clk);
+ 	return 0;
+ }
+ 
+@@ -138,7 +144,7 @@ static int __devinit ltq_stp_probe(struct platform_device *pdev)
+ 	}
+ 	ret = gpiochip_add(&ltq_stp_chip);
+ 	if (!ret)
+-		ret = ltq_stp_hw_init();
++		ret = ltq_stp_hw_init(&pdev->dev);
+ 
+ 	return ret;
+ }
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0026-MIPS-lantiq-convert-falcon-gpio-to-clkdev-api.patch b/target/linux/lantiq/patches-3.3/0026-MIPS-lantiq-convert-falcon-gpio-to-clkdev-api.patch
new file mode 100644
index 0000000000..e0fe2113b8
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0026-MIPS-lantiq-convert-falcon-gpio-to-clkdev-api.patch
@@ -0,0 +1,73 @@
+From e5bb79e897a95b688a93087f04848a043782a6a7 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 8 Mar 2012 11:22:03 +0100
+Subject: [PATCH 26/70] MIPS: lantiq: convert falcon gpio to clkdev api
+
+The falcon gpio clocks used to be enabled when registering the platform device.
+Move this code into the driver and use clkdev api.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/lantiq/falcon/devices.c |    5 -----
+ arch/mips/lantiq/falcon/gpio.c    |   10 ++++++++++
+ 2 files changed, 10 insertions(+), 5 deletions(-)
+
+diff --git a/arch/mips/lantiq/falcon/devices.c b/arch/mips/lantiq/falcon/devices.c
+index 4f47b44..6cd7a88 100644
+--- a/arch/mips/lantiq/falcon/devices.c
++++ b/arch/mips/lantiq/falcon/devices.c
+@@ -111,9 +111,6 @@ falcon_register_gpio(void)
+ 		falcon_gpio1_res, ARRAY_SIZE(falcon_gpio1_res));
+ 	platform_device_register_simple("falcon_gpio", 2,
+ 		falcon_gpio2_res, ARRAY_SIZE(falcon_gpio2_res));
+-	ltq_sysctl_activate(SYSCTL_SYS1, ACTS_PADCTRL1 | ACTS_P1);
+-	ltq_sysctl_activate(SYSCTL_SYSETH, ACTS_PADCTRL0 |
+-		ACTS_PADCTRL2 | ACTS_P0 | ACTS_P2);
+ }
+ 
+ void __init
+@@ -123,6 +120,4 @@ falcon_register_gpio_extra(void)
+ 		falcon_gpio3_res, ARRAY_SIZE(falcon_gpio3_res));
+ 	platform_device_register_simple("falcon_gpio", 4,
+ 		falcon_gpio4_res, ARRAY_SIZE(falcon_gpio4_res));
+-	ltq_sysctl_activate(SYSCTL_SYS1,
+-		ACTS_PADCTRL3 | ACTS_PADCTRL4 | ACTS_P3 | ACTS_P4);
+ }
+diff --git a/arch/mips/lantiq/falcon/gpio.c b/arch/mips/lantiq/falcon/gpio.c
+index a44f71b..4147d61 100644
+--- a/arch/mips/lantiq/falcon/gpio.c
++++ b/arch/mips/lantiq/falcon/gpio.c
+@@ -11,6 +11,7 @@
+ #include <linux/interrupt.h>
+ #include <linux/slab.h>
+ #include <linux/export.h>
++#include <linux/err.h>
+ #include <linux/platform_device.h>
+ 
+ #include <lantiq_soc.h>
+@@ -71,6 +72,7 @@ struct falcon_gpio_port {
+ 	void __iomem *port;
+ 	unsigned int irq_base;
+ 	unsigned int chained_irq;
++	struct clk *clk;
+ };
+ 
+ static struct falcon_gpio_port ltq_gpio_port[MAX_PORTS];
+@@ -332,6 +334,14 @@ falcon_gpio_probe(struct platform_device *pdev)
+ 		goto err;
+ 	}
+ 
++	gpio_port->clk = clk_get(&pdev->dev, NULL);
++	if (IS_ERR(gpio_port->clk)) {
++		dev_err(&pdev->dev, "Could not get clock\n");
++		ret = PTR_ERR(gpio_port->clk);;
++		goto err;
++	}
++	clk_enable(gpio_port->clk);
++
+ 	if (irq > 0) {
+ 		/* irq_chip support */
+ 		gpio_port->gpio_chip.to_irq = falcon_gpio_to_irq;
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0027-SERIAL-MIPS-lantiq-convert-serial-driver-to-clkdev-a.patch b/target/linux/lantiq/patches-3.3/0027-SERIAL-MIPS-lantiq-convert-serial-driver-to-clkdev-a.patch
new file mode 100644
index 0000000000..426dfcf583
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0027-SERIAL-MIPS-lantiq-convert-serial-driver-to-clkdev-a.patch
@@ -0,0 +1,41 @@
+From ded396701b769f4bd3960c353d40488fa5922a85 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 16 Feb 2012 20:17:16 +0100
+Subject: [PATCH 27/70] SERIAL: MIPS: lantiq: convert serial driver to clkdev
+ api
+
+Reference the FPI clock via its new access function.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Cc: linux-serial@vger.kernel.org
+---
+ drivers/tty/serial/lantiq.c |    6 +++++-
+ 1 files changed, 5 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
+index 5d25828..1542ad6 100644
+--- a/drivers/tty/serial/lantiq.c
++++ b/drivers/tty/serial/lantiq.c
+@@ -540,6 +540,10 @@ lqasc_request_port(struct uart_port *port)
+ 		if (ltq_gpio_request(&pdev->dev, MUXC_SIF_TX_PIN,
+ 				3, 1, "asc1-tx"))
+ 			return -EBUSY;
++		ltq_port->clk = clk_get(&pdev->dev, NULL);
++		if (IS_ERR(ltq_port->clk))
++			return PTR_ERR(ltq_port->clk);
++		clk_enable(ltq_port->clk);
+ 	}
+ 	return 0;
+ }
+@@ -698,7 +702,7 @@ lqasc_probe(struct platform_device *pdev)
+ 	if (lqasc_port[pdev->id] != NULL)
+ 		return -EBUSY;
+ 
+-	clk = clk_get(&pdev->dev, "fpi");
++	clk = clk_get_fpi();
+ 	if (IS_ERR(clk)) {
+ 		pr_err("failed to get fpi clk\n");
+ 		return -ENOENT;
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0028-MIPS-lantiq-convert-falcon-debug-uart-to-clkdev-api.patch b/target/linux/lantiq/patches-3.3/0028-MIPS-lantiq-convert-falcon-debug-uart-to-clkdev-api.patch
new file mode 100644
index 0000000000..2fa6991717
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0028-MIPS-lantiq-convert-falcon-debug-uart-to-clkdev-api.patch
@@ -0,0 +1,73 @@
+From 7ab075944587e4fe7e2688b1df85452e3d86edb5 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 21 Feb 2012 14:25:21 +0100
+Subject: [PATCH 28/70] MIPS: lantiq: convert falcon debug uart to clkdev api
+
+On Falcon SoCs we have a secondary serial port that can be used to help
+debug the voice core. For the port to work several clocking bits need to
+be activated. We convert the code to clkdev api.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/lantiq/falcon/prom.c |    4 +---
+ drivers/tty/serial/lantiq.c    |    7 ++++---
+ 2 files changed, 5 insertions(+), 6 deletions(-)
+
+diff --git a/arch/mips/lantiq/falcon/prom.c b/arch/mips/lantiq/falcon/prom.c
+index f98b389..2a4eea17 100644
+--- a/arch/mips/lantiq/falcon/prom.c
++++ b/arch/mips/lantiq/falcon/prom.c
+@@ -43,10 +43,8 @@ ltq_soc_setup(void)
+ 	ltq_register_asc(0);
+ 	ltq_register_wdt();
+ 	falcon_register_gpio();
+-	if (register_asc1) {
++	if (register_asc1)
+ 		ltq_register_asc(1);
+-		ltq_sysctl_activate(SYSCTL_SYS1, ACTS_ASC1_ACT);
+-	}
+ }
+ 
+ void __init
+diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
+index 1542ad6..82956de 100644
+--- a/drivers/tty/serial/lantiq.c
++++ b/drivers/tty/serial/lantiq.c
+@@ -117,6 +117,7 @@ static DEFINE_SPINLOCK(ltq_asc_lock);
+ 
+ struct ltq_uart_port {
+ 	struct uart_port	port;
++	struct clk		*fpiclk;
+ 	struct clk		*clk;
+ 	unsigned int		tx_irq;
+ 	unsigned int		rx_irq;
+@@ -319,7 +320,7 @@ lqasc_startup(struct uart_port *port)
+ 	struct ltq_uart_port *ltq_port = to_ltq_uart_port(port);
+ 	int retval;
+ 
+-	port->uartclk = clk_get_rate(ltq_port->clk);
++	port->uartclk = clk_get_rate(ltq_port->fpiclk);
+ 
+ 	ltq_w32_mask(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET),
+ 		port->membase + LTQ_ASC_CLC);
+@@ -646,7 +647,7 @@ lqasc_console_setup(struct console *co, char *options)
+ 
+ 	port = &ltq_port->port;
+ 
+-	port->uartclk = clk_get_rate(ltq_port->clk);
++	port->uartclk = clk_get_rate(ltq_port->fpiclk);
+ 
+ 	if (options)
+ 		uart_parse_options(options, &baud, &parity, &bits, &flow);
+@@ -731,7 +732,7 @@ lqasc_probe(struct platform_device *pdev)
+ 	port->irq	= tx_irq; /* unused, just to be backward-compatibe */
+ 	port->mapbase	= mmres->start;
+ 
+-	ltq_port->clk	= clk;
++	ltq_port->fpiclk = clk;
+ 
+ 	ltq_port->tx_irq = tx_irq;
+ 	ltq_port->rx_irq = rx_irq;
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0029-NET-MIPS-lantiq-convert-etop-driver-to-clkdev-api.patch b/target/linux/lantiq/patches-3.3/0029-NET-MIPS-lantiq-convert-etop-driver-to-clkdev-api.patch
new file mode 100644
index 0000000000..c48fb9bc79
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0029-NET-MIPS-lantiq-convert-etop-driver-to-clkdev-api.patch
@@ -0,0 +1,123 @@
+From 118d9f0abd69278cfdd7c5bde4743c0cab9b7618 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 8 Mar 2012 11:23:00 +0100
+Subject: [PATCH 29/70] NET: MIPS: lantiq: convert etop driver to clkdev api
+
+Update from old pmu_{dis,en}able() to ckldev api.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Cc: netdev@vger.kernel.org
+---
+ drivers/net/ethernet/lantiq_etop.c |   49 ++++++++++++++++++++++++++++++-----
+ 1 files changed, 42 insertions(+), 7 deletions(-)
+
+diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
+index ad0fa54..8fbb069 100644
+--- a/drivers/net/ethernet/lantiq_etop.c
++++ b/drivers/net/ethernet/lantiq_etop.c
+@@ -36,6 +36,7 @@
+ #include <linux/io.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/module.h>
++#include <linux/clk.h>
+ 
+ #include <asm/checksum.h>
+ 
+@@ -148,6 +149,11 @@ struct ltq_etop_priv {
+ 	int tx_free[MAX_DMA_CHAN >> 1];
+ 
+ 	spinlock_t lock;
++
++	struct clk *clk_ppe;
++	struct clk *clk_switch;
++	struct clk *clk_ephy;
++	struct clk *clk_ephycgu;
+ };
+ 
+ static int ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr,
+@@ -281,16 +287,27 @@ ltq_etop_hw_exit(struct net_device *dev)
+ 	struct ltq_etop_priv *priv = netdev_priv(dev);
+ 	int i;
+ 
+-	ltq_pmu_disable(PMU_PPE);
++	clk_disable(priv->clk_ppe);
++
++	if (ltq_has_gbit())
++		clk_disable(priv->clk_switch);
++
++	if (ltq_is_ase()) {
++		clk_disable(priv->clk_ephy);
++		clk_disable(priv->clk_ephycgu);
++	}
++
+ 	for (i = 0; i < MAX_DMA_CHAN; i++)
+ 		if (IS_TX(i) || IS_RX(i))
+ 			ltq_etop_free_channel(dev, &priv->ch[i]);
+ }
+ 
+ static void
+-ltq_etop_gbit_init(void)
++ltq_etop_gbit_init(struct net_device *dev)
+ {
+-	ltq_pmu_enable(PMU_SWITCH);
++	struct ltq_etop_priv *priv = netdev_priv(dev);
++
++	clk_enable(priv->clk_switch);
+ 
+ 	ltq_gbit_w32_mask(0, GCTL0_SE, LTQ_GBIT_GCTL0);
+ 	/** Disable MDIO auto polling mode */
+@@ -313,10 +330,10 @@ ltq_etop_hw_init(struct net_device *dev)
+ 	int err = 0;
+ 	int i;
+ 
+-	ltq_pmu_enable(PMU_PPE);
++	clk_enable(priv->clk_ppe);
+ 
+ 	if (ltq_has_gbit()) {
+-		ltq_etop_gbit_init();
++		ltq_etop_gbit_init(dev);
+ 		/* force the etops link to the gbit to MII */
+ 		mii_mode = PHY_INTERFACE_MODE_MII;
+ 	}
+@@ -334,11 +351,11 @@ ltq_etop_hw_init(struct net_device *dev)
+ 
+ 	default:
+ 		if (ltq_is_ase()) {
+-			ltq_pmu_enable(PMU_EPHY);
++			clk_enable(priv->clk_ephy);
+ 			/* disable external MII */
+ 			ltq_etop_w32_mask(0, ETOP_CFG_MII0, LTQ_ETOP_CFG);
+ 			/* enable clock for internal PHY */
+-			ltq_cgu_enable(CGU_EPHY);
++			clk_enable(priv->clk_ephycgu);
+ 			/* we need to write this magic to the internal phy to
+ 			   make it work */
+ 			ltq_etop_mdio_wr(NULL, 0x8, 0x12, 0xC020);
+@@ -883,6 +900,24 @@ ltq_etop_probe(struct platform_device *pdev)
+ 	priv->pdev = pdev;
+ 	priv->pldata = dev_get_platdata(&pdev->dev);
+ 	priv->netdev = dev;
++
++	priv->clk_ppe = clk_get(&pdev->dev, NULL);
++	if (IS_ERR(priv->clk_ppe))
++		return PTR_ERR(priv->clk_ppe);
++	if (ltq_has_gbit()) {
++		priv->clk_switch = clk_get(&pdev->dev, "switch");
++		if (IS_ERR(priv->clk_switch))
++			return PTR_ERR(priv->clk_switch);
++	}
++	if (ltq_is_ase()) {
++		priv->clk_ephy = clk_get(&pdev->dev, "ephy");
++		if (IS_ERR(priv->clk_ephy))
++			return PTR_ERR(priv->clk_ephy);
++		priv->clk_ephycgu = clk_get(&pdev->dev, "ephycgu");
++		if (IS_ERR(priv->clk_ephycgu))
++			return PTR_ERR(priv->clk_ephycgu);
++	}
++
+ 	spin_lock_init(&priv->lock);
+ 
+ 	for (i = 0; i < MAX_DMA_CHAN; i++) {
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0030-WDT-MIPS-lantiq-convert-watchdog-driver-to-clkdev-ap.patch b/target/linux/lantiq/patches-3.3/0030-WDT-MIPS-lantiq-convert-watchdog-driver-to-clkdev-ap.patch
new file mode 100644
index 0000000000..c18933be8e
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0030-WDT-MIPS-lantiq-convert-watchdog-driver-to-clkdev-ap.patch
@@ -0,0 +1,30 @@
+From 7971cef3f4036da74066aa4ca9b78fd1c9573a6c Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 16 Feb 2012 20:17:50 +0100
+Subject: [PATCH 30/70] WDT: MIPS: lantiq: convert watchdog driver to clkdev
+ api
+
+Refrence the IO region clock via its new access function.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Cc: linux-watchdog@vger.kernel.org
+---
+ drivers/watchdog/lantiq_wdt.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/watchdog/lantiq_wdt.c b/drivers/watchdog/lantiq_wdt.c
+index 9c8b10c..fa4866b 100644
+--- a/drivers/watchdog/lantiq_wdt.c
++++ b/drivers/watchdog/lantiq_wdt.c
+@@ -206,7 +206,7 @@ ltq_wdt_probe(struct platform_device *pdev)
+ 	}
+ 
+ 	/* we do not need to enable the clock as it is always running */
+-	clk = clk_get(&pdev->dev, "io");
++	clk = clk_get_io();
+ 	WARN_ON(!clk);
+ 	ltq_io_region_clk_rate = clk_get_rate(clk);
+ 	clk_put(clk);
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0031-MIPS-lantiq-unify-xway-prom-code.patch b/target/linux/lantiq/patches-3.3/0031-MIPS-lantiq-unify-xway-prom-code.patch
new file mode 100644
index 0000000000..1022450b67
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0031-MIPS-lantiq-unify-xway-prom-code.patch
@@ -0,0 +1,262 @@
+From 707d76cc9dc4ddfcea280b91df83bd726407518a Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 8 Mar 2012 11:44:55 +0100
+Subject: [PATCH 31/70] MIPS: lantiq: unify xway prom code
+
+The xway prom-ase.c and prom-xway.c files are redundant. Unify the 2 files.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/lantiq/xway/Makefile     |    5 +--
+ arch/mips/lantiq/xway/Makefile.rej |   11 -----
+ arch/mips/lantiq/xway/prom-ase.c   |   48 ----------------------
+ arch/mips/lantiq/xway/prom-xway.c  |   64 -----------------------------
+ arch/mips/lantiq/xway/prom.c       |   79 ++++++++++++++++++++++++++++++++++++
+ 5 files changed, 80 insertions(+), 127 deletions(-)
+ delete mode 100644 arch/mips/lantiq/xway/Makefile.rej
+ delete mode 100644 arch/mips/lantiq/xway/prom-ase.c
+ delete mode 100644 arch/mips/lantiq/xway/prom-xway.c
+ create mode 100644 arch/mips/lantiq/xway/prom.c
+
+diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
+index 4dcb96f..9d1a0a2 100644
+--- a/arch/mips/lantiq/xway/Makefile
++++ b/arch/mips/lantiq/xway/Makefile
+@@ -1,7 +1,4 @@
+-obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o
+-
+-obj-$(CONFIG_SOC_XWAY) += prom-xway.o
+-obj-$(CONFIG_SOC_AMAZON_SE) += prom-ase.o
++obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o prom.o
+ 
+ obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
+ obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
+diff --git a/arch/mips/lantiq/xway/Makefile.rej b/arch/mips/lantiq/xway/Makefile.rej
+deleted file mode 100644
+index c0d5b52..0000000
+--- a/arch/mips/lantiq/xway/Makefile.rej
++++ /dev/null
+@@ -1,11 +0,0 @@
+---- arch/mips/lantiq/xway/Makefile
+-+++ arch/mips/lantiq/xway/Makefile
+-@@ -1,7 +1,4 @@
+--obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o
+--
+--obj-$(CONFIG_SOC_XWAY) += prom-xway.o
+--obj-$(CONFIG_SOC_AMAZON_SE) += prom-ase.o
+-+obj-y := prom.o sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o
+- 
+- obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
+- obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
+diff --git a/arch/mips/lantiq/xway/prom-ase.c b/arch/mips/lantiq/xway/prom-ase.c
+deleted file mode 100644
+index 3f86a3b..0000000
+--- a/arch/mips/lantiq/xway/prom-ase.c
++++ /dev/null
+@@ -1,48 +0,0 @@
+-/*
+- *  This program is free software; you can redistribute it and/or modify it
+- *  under the terms of the GNU General Public License version 2 as published
+- *  by the Free Software Foundation.
+- *
+- *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+- */
+-
+-#include <linux/export.h>
+-#include <linux/clk.h>
+-#include <asm/bootinfo.h>
+-#include <asm/time.h>
+-
+-#include <lantiq_soc.h>
+-
+-#include "devices.h"
+-#include "../prom.h"
+-
+-#define SOC_AMAZON_SE	"Amazon_SE"
+-
+-#define PART_SHIFT	12
+-#define PART_MASK	0x0FFFFFFF
+-#define REV_SHIFT	28
+-#define REV_MASK	0xF0000000
+-
+-void __init ltq_soc_detect(struct ltq_soc_info *i)
+-{
+-	i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT;
+-	i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT;
+-	sprintf(i->rev_type, "1.%d", i->rev);
+-	switch (i->partnum) {
+-	case SOC_ID_AMAZON_SE:
+-		i->name = SOC_AMAZON_SE;
+-		i->type = SOC_TYPE_AMAZON_SE;
+-		break;
+-
+-	default:
+-		unreachable();
+-		break;
+-	}
+-}
+-
+-void __init ltq_soc_setup(void)
+-{
+-	ltq_register_ase_asc();
+-	ltq_register_gpio();
+-	ltq_register_wdt();
+-}
+diff --git a/arch/mips/lantiq/xway/prom-xway.c b/arch/mips/lantiq/xway/prom-xway.c
+deleted file mode 100644
+index d823a92..0000000
+--- a/arch/mips/lantiq/xway/prom-xway.c
++++ /dev/null
+@@ -1,64 +0,0 @@
+-/*
+- *  This program is free software; you can redistribute it and/or modify it
+- *  under the terms of the GNU General Public License version 2 as published
+- *  by the Free Software Foundation.
+- *
+- *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+- */
+-
+-#include <linux/export.h>
+-#include <linux/clk.h>
+-#include <asm/bootinfo.h>
+-#include <asm/time.h>
+-
+-#include <lantiq_soc.h>
+-
+-#include "devices.h"
+-#include "../prom.h"
+-
+-#define SOC_DANUBE	"Danube"
+-#define SOC_TWINPASS	"Twinpass"
+-#define SOC_AR9		"AR9"
+-
+-#define PART_SHIFT	12
+-#define PART_MASK	0x0FFFFFFF
+-#define REV_SHIFT	28
+-#define REV_MASK	0xF0000000
+-
+-void __init ltq_soc_detect(struct ltq_soc_info *i)
+-{
+-	i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT;
+-	i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT;
+-	sprintf(i->rev_type, "1.%d", i->rev);
+-	switch (i->partnum) {
+-	case SOC_ID_DANUBE1:
+-	case SOC_ID_DANUBE2:
+-		i->name = SOC_DANUBE;
+-		i->type = SOC_TYPE_DANUBE;
+-		break;
+-
+-	case SOC_ID_TWINPASS:
+-		i->name = SOC_TWINPASS;
+-		i->type = SOC_TYPE_DANUBE;
+-		break;
+-
+-	case SOC_ID_ARX188:
+-	case SOC_ID_ARX168:
+-	case SOC_ID_ARX182:
+-		i->name = SOC_AR9;
+-		i->type = SOC_TYPE_AR9;
+-		break;
+-
+-	default:
+-		unreachable();
+-		break;
+-	}
+-}
+-
+-void __init ltq_soc_setup(void)
+-{
+-	ltq_register_asc(0);
+-	ltq_register_asc(1);
+-	ltq_register_gpio();
+-	ltq_register_wdt();
+-}
+diff --git a/arch/mips/lantiq/xway/prom.c b/arch/mips/lantiq/xway/prom.c
+new file mode 100644
+index 0000000..0929acb
+--- /dev/null
++++ b/arch/mips/lantiq/xway/prom.c
+@@ -0,0 +1,79 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/export.h>
++#include <linux/clk.h>
++#include <asm/bootinfo.h>
++#include <asm/time.h>
++
++#include <lantiq_soc.h>
++
++#include "../prom.h"
++#include "devices.h"
++
++#define SOC_DANUBE	"Danube"
++#define SOC_TWINPASS	"Twinpass"
++#define SOC_AR9		"AR9"
++#define SOC_VR9		"VR9"
++
++#define PART_SHIFT	12
++#define PART_MASK	0x0FFFFFFF
++#define REV_SHIFT	28
++#define REV_MASK	0xF0000000
++
++#define SOC_AMAZON_SE	"Amazon_SE"
++
++void __init ltq_soc_detect(struct ltq_soc_info *i)
++{
++	i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT;
++	i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT;
++	sprintf(i->rev_type, "1.%d", i->rev);
++	switch (i->partnum) {
++	case SOC_ID_DANUBE1:
++	case SOC_ID_DANUBE2:
++		i->name = SOC_DANUBE;
++		i->type = SOC_TYPE_DANUBE;
++		break;
++
++	case SOC_ID_TWINPASS:
++		i->name = SOC_TWINPASS;
++		i->type = SOC_TYPE_DANUBE;
++		break;
++
++	case SOC_ID_ARX188:
++	case SOC_ID_ARX168:
++	case SOC_ID_ARX182:
++		i->name = SOC_AR9;
++		i->type = SOC_TYPE_AR9;
++		break;
++
++	case SOC_ID_AMAZON_SE:
++		i->name = SOC_AMAZON_SE;
++		i->type = SOC_TYPE_AMAZON_SE;
++#ifdef CONFIG_PCI
++		panic("ase is only supported for non pci kernels");
++#endif
++		break;
++
++	default:
++		unreachable();
++		break;
++	}
++}
++
++void __init ltq_soc_setup(void)
++{
++	if (ltq_is_ase()) {
++		ltq_register_ase_asc();
++	} else {
++		ltq_register_asc(0);
++		ltq_register_asc(1);
++	}
++	ltq_register_gpio();
++	ltq_register_wdt();
++}
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0032-MIPS-lantiq-add-vr9-support.patch b/target/linux/lantiq/patches-3.3/0032-MIPS-lantiq-add-vr9-support.patch
new file mode 100644
index 0000000000..ca803b9050
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0032-MIPS-lantiq-add-vr9-support.patch
@@ -0,0 +1,172 @@
+From d1711082beab74da07c2fd330c462ef407cb5579 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 21 Feb 2012 09:48:11 +0100
+Subject: [PATCH 32/70] MIPS: lantiq: add vr9 support
+
+VR9 is a VDSL SoC made by Lantiq. It is very similar to the AR9.
+This patch adds the clkdev init code and SoC detection for the VR9.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
+---
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h |    3 +
+ arch/mips/lantiq/xway/clk.c                        |   83 ++++++++++++++++++++
+ arch/mips/lantiq/xway/prom.c                       |    6 ++
+ arch/mips/lantiq/xway/sysctrl.c                    |   12 +++-
+ 4 files changed, 103 insertions(+), 1 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index e9d2dd4..5d11eb7 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -21,6 +21,9 @@
+ #define SOC_ID_ARX188		0x16C
+ #define SOC_ID_ARX168		0x16D
+ #define SOC_ID_ARX182		0x16F
++#define SOC_ID_VRX288		0x1C0 /* VRX288 v1.1 */
++#define SOC_ID_VRX268		0x1C2 /* VRX268 v1.1 */
++#define SOC_ID_GRX288		0x1C9 /* GRX288 v1.1 */
+ 
+ /* SoC Types */
+ #define SOC_TYPE_DANUBE		0x01
+diff --git a/arch/mips/lantiq/xway/clk.c b/arch/mips/lantiq/xway/clk.c
+index f3b50fc..3635c9f 100644
+--- a/arch/mips/lantiq/xway/clk.c
++++ b/arch/mips/lantiq/xway/clk.c
+@@ -225,3 +225,86 @@ unsigned long ltq_danube_fpi_hz(void)
+ 		return ddr_clock >> 1;
+ 	return ddr_clock;
+ }
++
++unsigned long ltq_vr9_cpu_hz(void)
++{
++	unsigned int cpu_sel;
++	unsigned long clk;
++
++	cpu_sel = (ltq_cgu_r32(LTQ_CGU_SYS_VR9) >> 4) & 0xf;
++
++	switch (cpu_sel) {
++	case 0:
++		clk = CLOCK_600M;
++		break;
++	case 1:
++		clk = CLOCK_500M;
++		break;
++	case 2:
++		clk = CLOCK_393M;
++		break;
++	case 3:
++		clk = CLOCK_333M;
++		break;
++	case 5:
++	case 6:
++		clk = CLOCK_196_608M;
++		break;
++	case 7:
++		clk = CLOCK_167M;
++		break;
++	case 4:
++	case 8:
++	case 9:
++		clk = CLOCK_125M;
++		break;
++	default:
++		clk = 0;
++		break;
++	}
++
++	return clk;
++}
++
++unsigned long ltq_vr9_fpi_hz(void)
++{
++	unsigned int ocp_sel, cpu_clk;
++	unsigned long clk;
++
++	cpu_clk = ltq_vr9_cpu_hz();
++	ocp_sel = ltq_cgu_r32(LTQ_CGU_SYS_VR9) & 0x3;
++
++	switch (ocp_sel) {
++	case 0:
++		/* OCP ratio 1 */
++		clk = cpu_clk;
++		break;
++	case 2:
++		/* OCP ratio 2 */
++		clk = cpu_clk / 2;
++		break;
++	case 3:
++		/* OCP ratio 2.5 */
++		clk = (cpu_clk * 2) / 5;
++		break;
++	case 4:
++		/* OCP ratio 3 */
++		clk = cpu_clk / 3;
++		break;
++	default:
++		clk = 0;
++		break;
++	}
++
++	return clk;
++}
++
++unsigned long ltq_vr9_io_region_clock(void)
++{
++	return ltq_vr9_fpi_hz();
++}
++
++unsigned long ltq_vr9_fpi_bus_clock(int fpi)
++{
++	return ltq_vr9_fpi_hz();
++}
+diff --git a/arch/mips/lantiq/xway/prom.c b/arch/mips/lantiq/xway/prom.c
+index 0929acb..b6f56b7 100644
+--- a/arch/mips/lantiq/xway/prom.c
++++ b/arch/mips/lantiq/xway/prom.c
+@@ -60,6 +60,12 @@ void __init ltq_soc_detect(struct ltq_soc_info *i)
+ #endif
+ 		break;
+ 
++	case SOC_ID_VRX268:
++	case SOC_ID_VRX288:
++		i->name = SOC_VR9;
++		i->type = SOC_TYPE_VR9;
++		break;
++
+ 	default:
+ 		unreachable();
+ 		break;
+diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
+index c5782b5..38f02f9 100644
+--- a/arch/mips/lantiq/xway/sysctrl.c
++++ b/arch/mips/lantiq/xway/sysctrl.c
+@@ -147,7 +147,8 @@ void __init ltq_soc_init(void)
+ 	clkdev_add_pmu("ltq_dma", NULL, 0, PMU_DMA);
+ 	clkdev_add_pmu("ltq_stp", NULL, 0, PMU_STP);
+ 	clkdev_add_pmu("ltq_spi", NULL, 0, PMU_SPI);
+-	clkdev_add_pmu("ltq_etop", NULL, 0, PMU_PPE);
++	if (!ltq_is_vr9())
++		clkdev_add_pmu("ltq_etop", NULL, 0, PMU_PPE);
+ 	if (ltq_is_ase()) {
+ 		if (ltq_cgu_r32(LTQ_CGU_SYS) & (1 << 5))
+ 			clkdev_add_static(CLOCK_266M, CLOCK_133M, CLOCK_133M);
+@@ -155,6 +156,15 @@ void __init ltq_soc_init(void)
+ 			clkdev_add_static(CLOCK_133M, CLOCK_133M, CLOCK_133M);
+ 		clkdev_add_cgu("ltq_etop", "ephycgu", CGU_EPHY),
+ 		clkdev_add_pmu("ltq_etop", "ephy", 0, PMU_EPHY);
++	} else if (ltq_is_vr9()) {
++		clkdev_add_static(ltq_vr9_cpu_hz(), ltq_vr9_fpi_hz(),
++					ltq_vr9_io_region_clock());
++		clkdev_add_pmu("ltq_pcie", "phy", 1, PMU1_PCIE_PHY);
++		clkdev_add_pmu("ltq_pcie", "bus", 0, PMU_PCIE_CLK);
++		clkdev_add_pmu("ltq_pcie", "msi", 1, PMU1_PCIE_MSI);
++		clkdev_add_pmu("ltq_pcie", "pdi", 1, PMU1_PCIE_PDI);
++		clkdev_add_pmu("ltq_pcie", "ctl", 1, PMU1_PCIE_CTL);
++		clkdev_add_pmu("ltq_pcie", "ahb", 0, PMU_AHBM | PMU_AHBS);
+ 	} else {
+ 		clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
+ 					ltq_danube_io_region_clock());
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0033-MIPS-lantiq-add-ipi-handlers-to-make-vsmp-work.patch b/target/linux/lantiq/patches-3.3/0033-MIPS-lantiq-add-ipi-handlers-to-make-vsmp-work.patch
new file mode 100644
index 0000000000..44d3cab80f
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0033-MIPS-lantiq-add-ipi-handlers-to-make-vsmp-work.patch
@@ -0,0 +1,124 @@
+From ec3b7d909fcc78e12625a4dd7ca27f63dddb3fa3 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 21 Feb 2012 21:09:01 +0100
+Subject: [PATCH 33/70] MIPS: lantiq: add ipi handlers to make vsmp work
+
+Add IPI handlers to the interrupt code. This patch makes MIPS_MT_SMP work
+on lantiq SoCs.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/lantiq/irq.c  |   61 +++++++++++++++++++++++++++++++++++++++++++++++
+ arch/mips/lantiq/prom.c |    5 ++++
+ 2 files changed, 66 insertions(+), 0 deletions(-)
+
+diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
+index ada3874..f17caec 100644
+--- a/arch/mips/lantiq/irq.c
++++ b/arch/mips/lantiq/irq.c
+@@ -9,6 +9,7 @@
+ 
+ #include <linux/interrupt.h>
+ #include <linux/ioport.h>
++#include <linux/sched.h>
+ 
+ #include <asm/bootinfo.h>
+ #include <asm/irq_cpu.h>
+@@ -54,6 +55,14 @@
+ #define ltq_eiu_w32(x, y)	ltq_w32((x), ltq_eiu_membase + (y))
+ #define ltq_eiu_r32(x)		ltq_r32(ltq_eiu_membase + (x))
+ 
++/* our 2 ipi interrupts for VSMP */
++#define MIPS_CPU_IPI_RESCHED_IRQ	0
++#define MIPS_CPU_IPI_CALL_IRQ		1
++
++#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
++int gic_present;
++#endif
++
+ static unsigned short ltq_eiu_irq[MAX_EIU] = {
+ 	LTQ_EIU_IR0,
+ 	LTQ_EIU_IR1,
+@@ -219,6 +228,47 @@ static void ltq_hw5_irqdispatch(void)
+ 	do_IRQ(MIPS_CPU_TIMER_IRQ);
+ }
+ 
++#ifdef CONFIG_MIPS_MT_SMP
++void __init arch_init_ipiirq(int irq, struct irqaction *action)
++{
++	setup_irq(irq, action);
++	irq_set_handler(irq, handle_percpu_irq);
++}
++
++static void ltq_sw0_irqdispatch(void)
++{
++	do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ);
++}
++
++static void ltq_sw1_irqdispatch(void)
++{
++	do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ);
++}
++static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
++{
++	scheduler_ipi();
++	return IRQ_HANDLED;
++}
++
++static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
++{
++	smp_call_function_interrupt();
++	return IRQ_HANDLED;
++}
++
++static struct irqaction irq_resched = {
++	.handler	= ipi_resched_interrupt,
++	.flags		= IRQF_PERCPU,
++	.name		= "IPI_resched"
++};
++
++static struct irqaction irq_call = {
++	.handler	= ipi_call_interrupt,
++	.flags		= IRQF_PERCPU,
++	.name		= "IPI_call"
++};
++#endif
++
+ asmlinkage void plat_irq_dispatch(void)
+ {
+ 	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
+@@ -313,6 +363,17 @@ void __init arch_init_irq(void)
+ 			irq_set_chip_and_handler(i, &ltq_irq_type,
+ 				handle_level_irq);
+ 
++#if defined(CONFIG_MIPS_MT_SMP)
++	if (cpu_has_vint) {
++		pr_info("Setting up IPI vectored interrupts\n");
++		set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ltq_sw0_irqdispatch);
++		set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ltq_sw1_irqdispatch);
++	}
++	arch_init_ipiirq(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ,
++		&irq_resched);
++	arch_init_ipiirq(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ, &irq_call);
++#endif
++
+ #if !defined(CONFIG_MIPS_MT_SMP) && !defined(CONFIG_MIPS_MT_SMTC)
+ 	set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 |
+ 		IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
+diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
+index 971554b..00ad59c 100644
+--- a/arch/mips/lantiq/prom.c
++++ b/arch/mips/lantiq/prom.c
+@@ -108,4 +108,9 @@ void __init prom_init(void)
+ 	soc_info.sys_type[LTQ_SYS_TYPE_LEN - 1] = '\0';
+ 	pr_info("SoC: %s\n", soc_info.sys_type);
+ 	prom_init_cmdline();
++
++#if defined(CONFIG_MIPS_MT_SMP)
++	if (register_vsmp_smp_ops())
++		panic("failed to register_vsmp_smp_ops()");
++#endif
+ }
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0034-MIPS-lantiq-add-additional-soc-ids.patch b/target/linux/lantiq/patches-3.3/0034-MIPS-lantiq-add-additional-soc-ids.patch
new file mode 100644
index 0000000000..cfbf080546
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0034-MIPS-lantiq-add-additional-soc-ids.patch
@@ -0,0 +1,156 @@
+From c02c17b2d2bd9663ded7e9f59d6ef24fba239b33 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 12 Mar 2012 15:23:39 +0100
+Subject: [PATCH 34/70] MIPS: lantiq: add additional soc ids
+
+---
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h |   38 +++++++++++++++----
+ arch/mips/lantiq/xway/prom.c                       |   35 ++++++++++++++++--
+ 2 files changed, 61 insertions(+), 12 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index 5d11eb7..3f22acb 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -17,20 +17,32 @@
+ #define SOC_ID_DANUBE1		0x129
+ #define SOC_ID_DANUBE2		0x12B
+ #define SOC_ID_TWINPASS		0x12D
+-#define SOC_ID_AMAZON_SE	0x152
++#define SOC_ID_AMAZON_SE_1	0x152 /* 50601 */
++#define SOC_ID_AMAZON_SE_2	0x153 /* 50600 */
+ #define SOC_ID_ARX188		0x16C
+-#define SOC_ID_ARX168		0x16D
++#define SOC_ID_ARX168_1		0x16D
++#define SOC_ID_ARX168_2		0x16E
+ #define SOC_ID_ARX182		0x16F
+-#define SOC_ID_VRX288		0x1C0 /* VRX288 v1.1 */
+-#define SOC_ID_VRX268		0x1C2 /* VRX268 v1.1 */
+-#define SOC_ID_GRX288		0x1C9 /* GRX288 v1.1 */
++#define SOC_ID_GRX188		0x170
++#define SOC_ID_GRX168		0x171
++
++#define SOC_ID_VRX288		0x1C0 /* v1.1 */
++#define SOC_ID_VRX282		0x1C1 /* v1.1 */
++#define SOC_ID_VRX268		0x1C2 /* v1.1 */
++#define SOC_ID_GRX268		0x1C8 /* v1.1 */
++#define SOC_ID_GRX288		0x1C9 /* v1.1 */
++#define SOC_ID_VRX288_2		0x00B /* v1.2 */
++#define SOC_ID_VRX268_2		0x00C /* v1.2 */
++#define SOC_ID_GRX288_2		0x00D /* v1.2 */
++#define SOC_ID_GRX282_2		0x00E /* v1.2 */
+ 
+ /* SoC Types */
+ #define SOC_TYPE_DANUBE		0x01
+ #define SOC_TYPE_TWINPASS	0x02
+ #define SOC_TYPE_AR9		0x03
+-#define SOC_TYPE_VR9		0x04
+-#define SOC_TYPE_AMAZON_SE	0x05
++#define SOC_TYPE_VR9_1		0x04 /* v1.1 */
++#define SOC_TYPE_VR9_2		0x05 /* v1.2 */
++#define SOC_TYPE_AMAZON_SE	0x06
+ 
+ /* ASC0/1 - serial port */
+ #define LTQ_ASC0_BASE_ADDR	0x1E100400
+@@ -149,9 +161,19 @@ static inline int ltq_is_ar9(void)
+ 	return (ltq_get_soc_type() == SOC_TYPE_AR9);
+ }
+ 
++static inline int ltq_is_vr9_1(void)
++{
++	return (ltq_get_soc_type() == SOC_TYPE_VR9_1);
++}
++
++static inline int ltq_is_vr9_2(void)
++{
++	return (ltq_get_soc_type() == SOC_TYPE_VR9_2);
++}
++
+ static inline int ltq_is_vr9(void)
+ {
+-	return (ltq_get_soc_type() == SOC_TYPE_VR9);
++	return (ltq_is_vr9_1() || ltq_is_vr9_2());
+ }
+ 
+ static inline int ltq_is_falcon(void)
+diff --git a/arch/mips/lantiq/xway/prom.c b/arch/mips/lantiq/xway/prom.c
+index b6f56b7..e3dcbbd 100644
+--- a/arch/mips/lantiq/xway/prom.c
++++ b/arch/mips/lantiq/xway/prom.c
+@@ -18,7 +18,9 @@
+ 
+ #define SOC_DANUBE	"Danube"
+ #define SOC_TWINPASS	"Twinpass"
++#define SOC_AMAZON_SE	"Amazon_SE"
+ #define SOC_AR9		"AR9"
++#define SOC_GR9		"GR9"
+ #define SOC_VR9		"VR9"
+ 
+ #define PART_SHIFT	12
+@@ -26,7 +28,6 @@
+ #define REV_SHIFT	28
+ #define REV_MASK	0xF0000000
+ 
+-#define SOC_AMAZON_SE	"Amazon_SE"
+ 
+ void __init ltq_soc_detect(struct ltq_soc_info *i)
+ {
+@@ -46,13 +47,21 @@ void __init ltq_soc_detect(struct ltq_soc_info *i)
+ 		break;
+ 
+ 	case SOC_ID_ARX188:
+-	case SOC_ID_ARX168:
++	case SOC_ID_ARX168_1:
++	case SOC_ID_ARX168_2:
+ 	case SOC_ID_ARX182:
+ 		i->name = SOC_AR9;
+ 		i->type = SOC_TYPE_AR9;
+ 		break;
+ 
+-	case SOC_ID_AMAZON_SE:
++	case SOC_ID_GRX188:
++	case SOC_ID_GRX168:
++		i->name = SOC_GR9;
++		i->type = SOC_TYPE_AR9;
++		break;
++
++	case SOC_ID_AMAZON_SE_1:
++	case SOC_ID_AMAZON_SE_2:
+ 		i->name = SOC_AMAZON_SE;
+ 		i->type = SOC_TYPE_AMAZON_SE;
+ #ifdef CONFIG_PCI
+@@ -60,12 +69,30 @@ void __init ltq_soc_detect(struct ltq_soc_info *i)
+ #endif
+ 		break;
+ 
++	case SOC_ID_VRX282:
+ 	case SOC_ID_VRX268:
+ 	case SOC_ID_VRX288:
+ 		i->name = SOC_VR9;
+-		i->type = SOC_TYPE_VR9;
++		i->type = SOC_TYPE_VR9_1;
+ 		break;
+ 
++	case SOC_ID_GRX268:
++	case SOC_ID_GRX288:
++		i->name = SOC_GR9;
++		i->type = SOC_TYPE_VR9_1;
++		break;
++
++	case SOC_ID_VRX268_2:
++	case SOC_ID_VRX288_2:
++		i->name = SOC_VR9;
++		i->type = SOC_TYPE_VR9_2;
++		break;
++
++	case SOC_ID_GRX282_2:
++	case SOC_ID_GRX288_2:
++		i->name = SOC_GR9;
++		i->type = SOC_TYPE_VR9_2;
++
+ 	default:
+ 		unreachable();
+ 		break;
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0035-SPI-MIPS-lantiq-add-FALC-ON-spi-driver.patch b/target/linux/lantiq/patches-3.3/0035-SPI-MIPS-lantiq-add-FALC-ON-spi-driver.patch
new file mode 100644
index 0000000000..2b5e694528
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0035-SPI-MIPS-lantiq-add-FALC-ON-spi-driver.patch
@@ -0,0 +1,633 @@
+From efa434fed99cee45778d824b34ccabb473a978ec Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 27 Aug 2011 18:12:26 +0200
+Subject: [PATCH 35/70] SPI: MIPS: lantiq: add FALC-ON spi driver
+
+The external bus unit (EBU) found on the FALC-ON SoC has spi emulation that is
+designed for serial flash access. This driver has only been tested with m25p80
+type chips. The hardware has no support for other types of spi peripherals.
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Cc: spi-devel-general@lists.sourceforge.net
+---
+ arch/mips/lantiq/falcon/devices.c        |   13 +
+ arch/mips/lantiq/falcon/devices.h        |    4 +
+ arch/mips/lantiq/falcon/mach-easy98000.c |   27 ++
+ drivers/spi/Kconfig                      |    4 +
+ drivers/spi/Makefile                     |    1 +
+ drivers/spi/spi-falcon.c                 |  483 ++++++++++++++++++++++++++++++
+ 6 files changed, 532 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/spi/spi-falcon.c
+
+diff --git a/arch/mips/lantiq/falcon/devices.c b/arch/mips/lantiq/falcon/devices.c
+index 6cd7a88..92ec571 100644
+--- a/arch/mips/lantiq/falcon/devices.c
++++ b/arch/mips/lantiq/falcon/devices.c
+@@ -121,3 +121,16 @@ falcon_register_gpio_extra(void)
+ 	platform_device_register_simple("falcon_gpio", 4,
+ 		falcon_gpio4_res, ARRAY_SIZE(falcon_gpio4_res));
+ }
++
++/* spi flash */
++static struct platform_device ltq_spi = {
++	.name			= "falcon_spi",
++	.num_resources		= 0,
++};
++
++void __init
++falcon_register_spi_flash(struct spi_board_info *data)
++{
++	spi_register_board_info(data, 1);
++	platform_device_register(&ltq_spi);
++}
+diff --git a/arch/mips/lantiq/falcon/devices.h b/arch/mips/lantiq/falcon/devices.h
+index 18be8b6..5e6f720 100644
+--- a/arch/mips/lantiq/falcon/devices.h
++++ b/arch/mips/lantiq/falcon/devices.h
+@@ -11,10 +11,14 @@
+ #ifndef _FALCON_DEVICES_H__
+ #define _FALCON_DEVICES_H__
+ 
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
++
+ #include "../devices.h"
+ 
+ extern void falcon_register_nand(void);
+ extern void falcon_register_gpio(void);
+ extern void falcon_register_gpio_extra(void);
++extern void falcon_register_spi_flash(struct spi_board_info *data);
+ 
+ #endif
+diff --git a/arch/mips/lantiq/falcon/mach-easy98000.c b/arch/mips/lantiq/falcon/mach-easy98000.c
+index 361b8f0..1a7caad 100644
+--- a/arch/mips/lantiq/falcon/mach-easy98000.c
++++ b/arch/mips/lantiq/falcon/mach-easy98000.c
+@@ -40,6 +40,21 @@ struct physmap_flash_data easy98000_nor_flash_data = {
+ 	.parts		= easy98000_nor_partitions,
+ };
+ 
++static struct flash_platform_data easy98000_spi_flash_platform_data = {
++	.name = "sflash",
++	.parts = easy98000_nor_partitions,
++	.nr_parts = ARRAY_SIZE(easy98000_nor_partitions)
++};
++
++static struct spi_board_info easy98000_spi_flash_data __initdata = {
++	.modalias		= "m25p80",
++	.bus_num		= 0,
++	.chip_select		= 0,
++	.max_speed_hz		= 10 * 1000 * 1000,
++	.mode			= SPI_MODE_3,
++	.platform_data		= &easy98000_spi_flash_platform_data
++};
++
+ /* setup gpio based spi bus/device for access to the eeprom on the board */
+ #define SPI_GPIO_MRST		102
+ #define SPI_GPIO_MTSR		103
+@@ -93,6 +108,13 @@ easy98000_init(void)
+ }
+ 
+ static void __init
++easy98000sf_init(void)
++{
++	easy98000_init_common();
++	falcon_register_spi_flash(&easy98000_spi_flash_data);
++}
++
++static void __init
+ easy98000nand_init(void)
+ {
+ 	easy98000_init_common();
+@@ -104,6 +126,11 @@ MIPS_MACHINE(LANTIQ_MACH_EASY98000,
+ 			"EASY98000 Eval Board",
+ 			easy98000_init);
+ 
++MIPS_MACHINE(LANTIQ_MACH_EASY98000SF,
++			"EASY98000SF",
++			"EASY98000 Eval Board (Serial Flash)",
++			easy98000sf_init);
++
+ MIPS_MACHINE(LANTIQ_MACH_EASY98000NAND,
+ 			"EASY98000NAND",
+ 			"EASY98000 Eval Board (NAND Flash)",
+diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
+index 8293658..41f8336 100644
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -179,6 +179,10 @@ config SPI_MPC52xx
+ 	  This drivers supports the MPC52xx SPI controller in master SPI
+ 	  mode.
+ 
++config SPI_FALCON
++	tristate "Falcon SPI controller support"
++	depends on SOC_FALCON
++
+ config SPI_MPC52xx_PSC
+ 	tristate "Freescale MPC52xx PSC SPI controller"
+ 	depends on PPC_MPC52xx && EXPERIMENTAL
+diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
+index 61c3261..570894c 100644
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -25,6 +25,7 @@ obj-$(CONFIG_SPI_DW_MMIO)		+= spi-dw-mmio.o
+ obj-$(CONFIG_SPI_DW_PCI)		+= spi-dw-midpci.o
+ spi-dw-midpci-objs			:= spi-dw-pci.o spi-dw-mid.o
+ obj-$(CONFIG_SPI_EP93XX)		+= spi-ep93xx.o
++obj-$(CONFIG_SPI_FALCON)		+= spi-falcon.o
+ obj-$(CONFIG_SPI_FSL_LIB)		+= spi-fsl-lib.o
+ obj-$(CONFIG_SPI_FSL_ESPI)		+= spi-fsl-espi.o
+ obj-$(CONFIG_SPI_FSL_SPI)		+= spi-fsl-spi.o
+diff --git a/drivers/spi/spi-falcon.c b/drivers/spi/spi-falcon.c
+new file mode 100644
+index 0000000..447bbaa
+--- /dev/null
++++ b/drivers/spi/spi-falcon.c
+@@ -0,0 +1,483 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com>
++ */
++
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++#include <linux/delay.h>
++#include <linux/workqueue.h>
++
++#include <lantiq_soc.h>
++
++#define DRV_NAME			"falcon_spi"
++
++#define FALCON_SPI_XFER_BEGIN		(1 << 0)
++#define FALCON_SPI_XFER_END		(1 << 1)
++
++/* Bus Read Configuration Register0 */
++#define LTQ_BUSRCON0	0x00000010
++/* Bus Write Configuration Register0 */
++#define LTQ_BUSWCON0	0x00000018
++/* Serial Flash Configuration Register */
++#define LTQ_SFCON	0x00000080
++/* Serial Flash Time Register */
++#define LTQ_SFTIME	0x00000084
++/* Serial Flash Status Register */
++#define LTQ_SFSTAT	0x00000088
++/* Serial Flash Command Register */
++#define LTQ_SFCMD	0x0000008C
++/* Serial Flash Address Register */
++#define LTQ_SFADDR	0x00000090
++/* Serial Flash Data Register */
++#define LTQ_SFDATA	0x00000094
++/* Serial Flash I/O Control Register */
++#define LTQ_SFIO	0x00000098
++/* EBU Clock Control Register */
++#define LTQ_EBUCC	0x000000C4
++
++/* Dummy Phase Length */
++#define SFCMD_DUMLEN_OFFSET	16
++#define SFCMD_DUMLEN_MASK	0x000F0000
++/* Chip Select */
++#define SFCMD_CS_OFFSET		24
++#define SFCMD_CS_MASK		0x07000000
++/* field offset */
++#define SFCMD_ALEN_OFFSET	20
++#define SFCMD_ALEN_MASK		0x00700000
++/* SCK Rise-edge Position */
++#define SFTIME_SCKR_POS_OFFSET	8
++#define SFTIME_SCKR_POS_MASK	0x00000F00
++/* SCK Period */
++#define SFTIME_SCK_PER_OFFSET	0
++#define SFTIME_SCK_PER_MASK	0x0000000F
++/* SCK Fall-edge Position */
++#define SFTIME_SCKF_POS_OFFSET	12
++#define SFTIME_SCKF_POS_MASK	0x0000F000
++/* Device Size */
++#define SFCON_DEV_SIZE_A23_0	0x03000000
++#define SFCON_DEV_SIZE_MASK	0x0F000000
++/* Read Data Position */
++#define SFTIME_RD_POS_MASK	0x000F0000
++/* Data Output */
++#define SFIO_UNUSED_WD_MASK	0x0000000F
++/* Command Opcode mask */
++#define SFCMD_OPC_MASK		0x000000FF
++/* dlen bytes of data to write */
++#define SFCMD_DIR_WRITE		0x00000100
++/* Data Length offset */
++#define SFCMD_DLEN_OFFSET	9
++/* Command Error */
++#define SFSTAT_CMD_ERR		0x20000000
++/* Access Command Pending */
++#define SFSTAT_CMD_PEND		0x00400000
++/* Frequency set to 100MHz. */
++#define EBUCC_EBUDIV_SELF100	0x00000001
++/* Serial Flash */
++#define BUSRCON0_AGEN_SERIAL_FLASH	0xF0000000
++/* 8-bit multiplexed */
++#define BUSRCON0_PORTW_8_BIT_MUX	0x00000000
++/* Serial Flash */
++#define BUSWCON0_AGEN_SERIAL_FLASH	0xF0000000
++/* Chip Select after opcode */
++#define SFCMD_KEEP_CS_KEEP_SELECTED	0x00008000
++
++struct falcon_spi {
++	u32 sfcmd; /* for caching of opcode, direction, ... */
++	struct spi_master *master;
++};
++
++int
++falcon_spi_xfer(struct spi_device *spi,
++		    struct spi_transfer *t,
++		    unsigned long flags)
++{
++	struct device *dev = &spi->dev;
++	struct falcon_spi *priv = spi_master_get_devdata(spi->master);
++	const u8 *txp = t->tx_buf;
++	u8 *rxp = t->rx_buf;
++	unsigned int bytelen = ((8 * t->len + 7) / 8);
++	unsigned int len, alen, dumlen;
++	u32 val;
++	enum {
++		state_init,
++		state_command_prepare,
++		state_write,
++		state_read,
++		state_disable_cs,
++		state_end
++	} state = state_init;
++
++	do {
++		switch (state) {
++		case state_init: /* detect phase of upper layer sequence */
++		{
++			/* initial write ? */
++			if (flags & FALCON_SPI_XFER_BEGIN) {
++				if (!txp) {
++					dev_err(dev,
++						"BEGIN without tx data!\n");
++					return -1;
++				}
++				/*
++				 * Prepare the parts of the sfcmd register,
++				 * which should not
++				 * change during a sequence!
++				 * Only exception are the length fields,
++				 * especially alen and dumlen.
++				 */
++
++				priv->sfcmd = ((spi->chip_select
++						<< SFCMD_CS_OFFSET)
++					       & SFCMD_CS_MASK);
++				priv->sfcmd |= SFCMD_KEEP_CS_KEEP_SELECTED;
++				priv->sfcmd |= *txp;
++				txp++;
++				bytelen--;
++				if (bytelen) {
++					/*
++					 * more data:
++					 * maybe address and/or dummy
++					 */
++					state = state_command_prepare;
++					break;
++				} else {
++					dev_dbg(dev, "write cmd %02X\n",
++						priv->sfcmd & SFCMD_OPC_MASK);
++				}
++			}
++			/* continued write ? */
++			if (txp && bytelen) {
++				state = state_write;
++				break;
++			}
++			/* read data? */
++			if (rxp && bytelen) {
++				state = state_read;
++				break;
++			}
++			/* end of sequence? */
++			if (flags & FALCON_SPI_XFER_END)
++				state = state_disable_cs;
++			else
++				state = state_end;
++			break;
++		}
++		/* collect tx data for address and dummy phase */
++		case state_command_prepare:
++		{
++			/* txp is valid, already checked */
++			val = 0;
++			alen = 0;
++			dumlen = 0;
++			while (bytelen > 0) {
++				if (alen < 3) {
++					val = (val<<8)|(*txp++);
++					alen++;
++				} else if ((dumlen < 15) && (*txp == 0)) {
++					/*
++					 * assume dummy bytes are set to 0
++					 * from upper layer
++					 */
++					dumlen++;
++					txp++;
++				} else
++					break;
++				bytelen--;
++			}
++			priv->sfcmd &= ~(SFCMD_ALEN_MASK | SFCMD_DUMLEN_MASK);
++			priv->sfcmd |= (alen << SFCMD_ALEN_OFFSET) |
++					 (dumlen << SFCMD_DUMLEN_OFFSET);
++			if (alen > 0)
++				ltq_ebu_w32(val, LTQ_SFADDR);
++
++			dev_dbg(dev, "write cmd %02X, alen=%d "
++				"(addr=%06X) dumlen=%d\n",
++				priv->sfcmd & SFCMD_OPC_MASK,
++				alen, val, dumlen);
++
++			if (bytelen > 0) {
++				/* continue with write */
++				state = state_write;
++			} else if (flags & FALCON_SPI_XFER_END) {
++				/* end of sequence? */
++				state = state_disable_cs;
++			} else {
++				/*
++				 * go to end and expect another
++				 * call (read or write)
++				 */
++				state = state_end;
++			}
++			break;
++		}
++		case state_write:
++		{
++			/* txp still valid */
++			priv->sfcmd |= SFCMD_DIR_WRITE;
++			len = 0;
++			val = 0;
++			do {
++				if (bytelen--)
++					val |= (*txp++) << (8 * len++);
++				if ((flags & FALCON_SPI_XFER_END)
++				    && (bytelen == 0)) {
++					priv->sfcmd &=
++						~SFCMD_KEEP_CS_KEEP_SELECTED;
++				}
++				if ((len == 4) || (bytelen == 0)) {
++					ltq_ebu_w32(val, LTQ_SFDATA);
++					ltq_ebu_w32(priv->sfcmd
++						| (len<<SFCMD_DLEN_OFFSET),
++						LTQ_SFCMD);
++					len = 0;
++					val = 0;
++					priv->sfcmd &= ~(SFCMD_ALEN_MASK
++							 | SFCMD_DUMLEN_MASK);
++				}
++			} while (bytelen);
++			state = state_end;
++			break;
++		}
++		case state_read:
++		{
++			/* read data */
++			priv->sfcmd &= ~SFCMD_DIR_WRITE;
++			do {
++				if ((flags & FALCON_SPI_XFER_END)
++				    && (bytelen <= 4)) {
++					priv->sfcmd &=
++						~SFCMD_KEEP_CS_KEEP_SELECTED;
++				}
++				len = (bytelen > 4) ? 4 : bytelen;
++				bytelen -= len;
++				ltq_ebu_w32(priv->sfcmd
++					|(len<<SFCMD_DLEN_OFFSET), LTQ_SFCMD);
++				priv->sfcmd &= ~(SFCMD_ALEN_MASK
++						 | SFCMD_DUMLEN_MASK);
++				do {
++					val = ltq_ebu_r32(LTQ_SFSTAT);
++					if (val & SFSTAT_CMD_ERR) {
++						/* reset error status */
++						dev_err(dev, "SFSTAT: CMD_ERR "
++							"(%x)\n", val);
++						ltq_ebu_w32(SFSTAT_CMD_ERR,
++							LTQ_SFSTAT);
++						return -1;
++					}
++				} while (val & SFSTAT_CMD_PEND);
++				val = ltq_ebu_r32(LTQ_SFDATA);
++				do {
++					*rxp = (val & 0xFF);
++					rxp++;
++					val >>= 8;
++					len--;
++				} while (len);
++			} while (bytelen);
++			state = state_end;
++			break;
++		}
++		case state_disable_cs:
++		{
++			priv->sfcmd &= ~SFCMD_KEEP_CS_KEEP_SELECTED;
++			ltq_ebu_w32(priv->sfcmd | (0 << SFCMD_DLEN_OFFSET),
++				LTQ_SFCMD);
++			val = ltq_ebu_r32(LTQ_SFSTAT);
++			if (val & SFSTAT_CMD_ERR) {
++				/* reset error status */
++				dev_err(dev, "SFSTAT: CMD_ERR (%x)\n", val);
++				ltq_ebu_w32(SFSTAT_CMD_ERR, LTQ_SFSTAT);
++				return -1;
++			}
++			state = state_end;
++			break;
++		}
++		case state_end:
++			break;
++		}
++	} while (state != state_end);
++
++	return 0;
++}
++
++static int
++falcon_spi_setup(struct spi_device *spi)
++{
++	struct device *dev = &spi->dev;
++	const u32 ebuclk = 100000000;
++	unsigned int i;
++	unsigned long flags;
++
++	dev_dbg(dev, "setup\n");
++
++	if (spi->master->bus_num > 0 || spi->chip_select > 0)
++		return -ENODEV;
++
++	spin_lock_irqsave(&ebu_lock, flags);
++
++	if (ebuclk < spi->max_speed_hz) {
++		/* set EBU clock to 100 MHz */
++		ltq_sys1_w32_mask(0, EBUCC_EBUDIV_SELF100, LTQ_EBUCC);
++		i = 1; /* divider */
++	} else {
++		/* set EBU clock to 50 MHz */
++		ltq_sys1_w32_mask(EBUCC_EBUDIV_SELF100, 0, LTQ_EBUCC);
++
++		/* search for suitable divider */
++		for (i = 1; i < 7; i++) {
++			if (ebuclk / i <= spi->max_speed_hz)
++				break;
++		}
++	}
++
++	/* setup period of serial clock */
++	ltq_ebu_w32_mask(SFTIME_SCKF_POS_MASK
++		     | SFTIME_SCKR_POS_MASK
++		     | SFTIME_SCK_PER_MASK,
++		     (i << SFTIME_SCKR_POS_OFFSET)
++		     | (i << (SFTIME_SCK_PER_OFFSET + 1)),
++		     LTQ_SFTIME);
++
++	/*
++	 * set some bits of unused_wd, to not trigger HOLD/WP
++	 * signals on non QUAD flashes
++	 */
++	ltq_ebu_w32((SFIO_UNUSED_WD_MASK & (0x8 | 0x4)), LTQ_SFIO);
++
++	ltq_ebu_w32(BUSRCON0_AGEN_SERIAL_FLASH | BUSRCON0_PORTW_8_BIT_MUX,
++		LTQ_BUSRCON0);
++	ltq_ebu_w32(BUSWCON0_AGEN_SERIAL_FLASH, LTQ_BUSWCON0);
++	/* set address wrap around to maximum for 24-bit addresses */
++	ltq_ebu_w32_mask(SFCON_DEV_SIZE_MASK, SFCON_DEV_SIZE_A23_0, LTQ_SFCON);
++
++	spin_unlock_irqrestore(&ebu_lock, flags);
++
++	return 0;
++}
++
++static int
++falcon_spi_transfer(struct spi_device *spi, struct spi_message *m)
++{
++	struct falcon_spi *priv = spi_master_get_devdata(spi->master);
++	struct spi_transfer *t;
++	unsigned long spi_flags;
++	unsigned long flags;
++	int ret = 0;
++
++	priv->sfcmd = 0;
++	m->actual_length = 0;
++
++	spi_flags = FALCON_SPI_XFER_BEGIN;
++	list_for_each_entry(t, &m->transfers, transfer_list) {
++		if (list_is_last(&t->transfer_list, &m->transfers))
++			spi_flags |= FALCON_SPI_XFER_END;
++
++		spin_lock_irqsave(&ebu_lock, flags);
++		ret = falcon_spi_xfer(spi, t, spi_flags);
++		spin_unlock_irqrestore(&ebu_lock, flags);
++
++		if (ret)
++			break;
++
++		m->actual_length += t->len;
++
++		if (t->delay_usecs || t->cs_change)
++			BUG();
++
++		spi_flags = 0;
++	}
++
++	m->status = ret;
++	m->complete(m->context);
++
++	return 0;
++}
++
++static void
++falcon_spi_cleanup(struct spi_device *spi)
++{
++	struct device *dev = &spi->dev;
++
++	dev_dbg(dev, "cleanup\n");
++}
++
++static int __devinit
++falcon_spi_probe(struct platform_device *pdev)
++{
++	struct device *dev = &pdev->dev;
++	struct falcon_spi *priv;
++	struct spi_master *master;
++	int ret;
++
++	dev_dbg(dev, "probing\n");
++
++	master = spi_alloc_master(&pdev->dev, sizeof(*priv));
++	if (!master) {
++		dev_err(dev, "no memory for spi_master\n");
++		return -ENOMEM;
++	}
++
++	priv = spi_master_get_devdata(master);
++	priv->master = master;
++
++	master->mode_bits = SPI_MODE_3;
++	master->num_chipselect = 1;
++	master->bus_num = 0;
++
++	master->setup = falcon_spi_setup;
++	master->transfer = falcon_spi_transfer;
++	master->cleanup = falcon_spi_cleanup;
++
++	platform_set_drvdata(pdev, priv);
++
++	ret = spi_register_master(master);
++	if (ret)
++		spi_master_put(master);
++
++	return ret;
++}
++
++static int __devexit
++falcon_spi_remove(struct platform_device *pdev)
++{
++	struct device *dev = &pdev->dev;
++	struct falcon_spi *priv = platform_get_drvdata(pdev);
++
++	dev_dbg(dev, "removed\n");
++
++	spi_unregister_master(priv->master);
++
++	return 0;
++}
++
++static struct platform_driver falcon_spi_driver = {
++	.probe	= falcon_spi_probe,
++	.remove	= __devexit_p(falcon_spi_remove),
++	.driver = {
++		.name	= DRV_NAME,
++		.owner	= THIS_MODULE
++	}
++};
++
++static int __init
++falcon_spi_init(void)
++{
++	return platform_driver_register(&falcon_spi_driver);
++}
++
++static void __exit
++falcon_spi_exit(void)
++{
++	platform_driver_unregister(&falcon_spi_driver);
++}
++
++module_init(falcon_spi_init);
++module_exit(falcon_spi_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("Lantiq Falcon SPI controller driver");
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0036-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch b/target/linux/lantiq/patches-3.3/0036-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
new file mode 100644
index 0000000000..48935385a1
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0036-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
@@ -0,0 +1,1225 @@
+From 59e21a2ab9b7554acf2c15dc9ee191e76bebade7 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 4 Nov 2011 16:00:34 +0100
+Subject: [PATCH 36/70] I2C: MIPS: lantiq: add FALC-ON i2c bus master
+
+This patch adds the driver needed to make the I2C bus work on FALC-ON SoCs.
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Cc: linux-i2c@vger.kernel.org
+---
+ .../include/asm/mach-lantiq/falcon/lantiq_soc.h    |    5 +
+ arch/mips/lantiq/falcon/clk.c                      |   44 -
+ arch/mips/lantiq/falcon/devices.c                  |   16 +
+ arch/mips/lantiq/falcon/devices.h                  |    1 +
+ arch/mips/lantiq/falcon/mach-easy98000.c           |    1 +
+ drivers/i2c/busses/Kconfig                         |   10 +
+ drivers/i2c/busses/Makefile                        |    1 +
+ drivers/i2c/busses/i2c-falcon.c                    | 1040 ++++++++++++++++++++
+ 8 files changed, 1074 insertions(+), 44 deletions(-)
+ delete mode 100644 arch/mips/lantiq/falcon/clk.c
+ create mode 100644 drivers/i2c/busses/i2c-falcon.c
+
+diff --git a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+index 120c56c..fff5ecd 100644
+--- a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+@@ -72,6 +72,10 @@
+ #define LTQ_PADCTRL4_BASE_ADDR  0x1E800600
+ #define LTQ_PADCTRL4_SIZE       0x0100
+ 
++/* I2C */
++#define GPON_I2C_BASE		0x1E200000
++#define GPON_I2C_SIZE		0x00010000
++
+ /* CHIP ID */
+ #define LTQ_STATUS_BASE_ADDR	0x1E802000
+ 
+@@ -106,6 +110,7 @@
+ #define ACTS_PADCTRL2	0x00200000
+ #define ACTS_PADCTRL3	0x00200000
+ #define ACTS_PADCTRL4	0x00400000
++#define ACTS_I2C_ACT	0x00004000
+ 
+ /* global register ranges */
+ extern __iomem void *ltq_ebu_membase;
+diff --git a/arch/mips/lantiq/falcon/clk.c b/arch/mips/lantiq/falcon/clk.c
+deleted file mode 100644
+index afe1b52..0000000
+--- a/arch/mips/lantiq/falcon/clk.c
++++ /dev/null
+@@ -1,44 +0,0 @@
+-/*
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- *
+- * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
+- * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+- */
+-
+-#include <linux/ioport.h>
+-#include <linux/export.h>
+-
+-#include <lantiq_soc.h>
+-
+-#include "devices.h"
+-
+-/* CPU0 Clock Control Register */
+-#define LTQ_SYS1_CPU0CC		0x0040
+-/* clock divider bit */
+-#define LTQ_CPU0CC_CPUDIV	0x0001
+-
+-unsigned int
+-ltq_get_io_region_clock(void)
+-{
+-	return CLOCK_200M;
+-}
+-EXPORT_SYMBOL(ltq_get_io_region_clock);
+-
+-unsigned int
+-ltq_get_cpu_hz(void)
+-{
+-	if (ltq_sys1_r32(LTQ_SYS1_CPU0CC) & LTQ_CPU0CC_CPUDIV)
+-		return CLOCK_200M;
+-	else
+-		return CLOCK_400M;
+-}
+-EXPORT_SYMBOL(ltq_get_cpu_hz);
+-
+-unsigned int
+-ltq_get_fpi_hz(void)
+-{
+-	return CLOCK_100M;
+-}
+-EXPORT_SYMBOL(ltq_get_fpi_hz);
+diff --git a/arch/mips/lantiq/falcon/devices.c b/arch/mips/lantiq/falcon/devices.c
+index 92ec571..e684ed4 100644
+--- a/arch/mips/lantiq/falcon/devices.c
++++ b/arch/mips/lantiq/falcon/devices.c
+@@ -134,3 +134,19 @@ falcon_register_spi_flash(struct spi_board_info *data)
+ 	spi_register_board_info(data, 1);
+ 	platform_device_register(&ltq_spi);
+ }
++
++/* i2c */
++static struct resource falcon_i2c_resources[] = {
++	MEM_RES("i2c", GPON_I2C_BASE, GPON_I2C_SIZE),
++	IRQ_RES(i2c_lb, FALCON_IRQ_I2C_LBREQ),
++	IRQ_RES(i2c_b, FALCON_IRQ_I2C_BREQ),
++	IRQ_RES(i2c_err, FALCON_IRQ_I2C_I2C_ERR),
++	IRQ_RES(i2c_p, FALCON_IRQ_I2C_I2C_P),
++};
++
++void __init
++falcon_register_i2c(void)
++{
++	platform_device_register_simple("i2c-falcon", 0,
++		falcon_i2c_resources, ARRAY_SIZE(falcon_i2c_resources));
++}
+diff --git a/arch/mips/lantiq/falcon/devices.h b/arch/mips/lantiq/falcon/devices.h
+index 5e6f720..d81edbe 100644
+--- a/arch/mips/lantiq/falcon/devices.h
++++ b/arch/mips/lantiq/falcon/devices.h
+@@ -20,5 +20,6 @@ extern void falcon_register_nand(void);
+ extern void falcon_register_gpio(void);
+ extern void falcon_register_gpio_extra(void);
+ extern void falcon_register_spi_flash(struct spi_board_info *data);
++extern void falcon_register_i2c(void);
+ 
+ #endif
+diff --git a/arch/mips/lantiq/falcon/mach-easy98000.c b/arch/mips/lantiq/falcon/mach-easy98000.c
+index 1a7caad..fc5720d 100644
+--- a/arch/mips/lantiq/falcon/mach-easy98000.c
++++ b/arch/mips/lantiq/falcon/mach-easy98000.c
+@@ -98,6 +98,7 @@ easy98000_init_common(void)
+ {
+ 	spi_register_board_info(&easy98000_spi_gpio_devices, 1);
+ 	platform_device_register(&easy98000_spi_gpio_device);
++	falcon_register_i2c();
+ }
+ 
+ static void __init
+diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
+index 3101dd5..e8d149d 100644
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -369,6 +369,16 @@ config I2C_DESIGNWARE_PCI
+ 	  This driver can also be built as a module.  If so, the module
+ 	  will be called i2c-designware-pci.
+ 
++config I2C_FALCON
++	tristate "Falcon I2C interface"
++	depends on SOC_FALCON
++	help
++	  If you say yes to this option, support will be included for the
++	  Lantiq FALC-ON I2C core.
++
++	  This driver can also be built as a module. If so, the module
++	  will be called i2c-falcon.
++
+ config I2C_GPIO
+ 	tristate "GPIO-based bitbanging I2C"
+ 	depends on GENERIC_GPIO
+diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
+index fba6da6..36239c8 100644
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -37,6 +37,7 @@ obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM)	+= i2c-designware-platform.o
+ i2c-designware-platform-objs := i2c-designware-platdrv.o i2c-designware-core.o
+ obj-$(CONFIG_I2C_DESIGNWARE_PCI)	+= i2c-designware-pci.o
+ i2c-designware-pci-objs := i2c-designware-pcidrv.o i2c-designware-core.o
++obj-$(CONFIG_I2C_FALCON)	+= i2c-falcon.o
+ obj-$(CONFIG_I2C_GPIO)		+= i2c-gpio.o
+ obj-$(CONFIG_I2C_HIGHLANDER)	+= i2c-highlander.o
+ obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic.o
+diff --git a/drivers/i2c/busses/i2c-falcon.c b/drivers/i2c/busses/i2c-falcon.c
+new file mode 100644
+index 0000000..fc4f0eb
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-falcon.c
+@@ -0,0 +1,1040 @@
++/*
++ * Lantiq FALC(tm) ON - I2C bus adapter
++ *
++ * Parts based on i2c-designware.c and other i2c drivers from Linux 2.6.33
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com>
++ */
++
++/*
++ * CURRENT ISSUES:
++ * - no high speed support
++ * - supports only master mode
++ * - ten bit mode is not tested (no slave devices)
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/slab.h>
++#include <linux/i2c.h>
++#include <linux/clk.h>
++#include <linux/errno.h>
++#include <linux/sched.h>
++#include <linux/err.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/err.h>
++#include <linux/gpio.h>
++
++#include <lantiq_soc.h>
++
++/* I2C Identification Register */
++/* Module ID */
++#define I2C_ID_ID_MASK 0x0000FF00
++/* field offset */
++#define I2C_ID_ID_OFFSET 8
++/* Revision */
++#define I2C_ID_REV_MASK 0x000000FF
++/* field offset */
++#define I2C_ID_REV_OFFSET 0
++
++/* I2C Error Interrupt Request Source Status Register */
++/* TXF_OFL */
++#define I2C_ERR_IRQSS_TXF_OFL 0x00000008
++/* TXF_UFL */
++#define I2C_ERR_IRQSS_TXF_UFL 0x00000004
++/* RXF_OFL */
++#define I2C_ERR_IRQSS_RXF_OFL 0x00000002
++/* RXF_UFL */
++#define I2C_ERR_IRQSS_RXF_UFL 0x00000001
++
++/* I2C Bus Status Register */
++/* Bus Status */
++#define I2C_BUS_STAT_BS_MASK 0x00000003
++/* I2C Bus is free. */
++#define I2C_BUS_STAT_BS_FREE 0x00000000
++/*
++ * The device is working as master and has claimed the control
++ * on the I2C-bus (busy master).
++ */
++#define I2C_BUS_STAT_BS_BM 0x00000002
++
++/* I2C Interrupt Clear Register */
++/* Clear */
++#define I2C_ICR_BREQ_INT_CLR 0x00000008
++/* Clear */
++#define I2C_ICR_LBREQ_INT_CLR 0x00000004
++
++/* I2C RUN Control Register */
++/* Enable */
++#define I2C_RUN_CTRL_RUN_EN 0x00000001
++
++/* I2C Kernel Clock Control Register */
++/* field offset */
++#define I2C_CLC_RMC_OFFSET 8
++/* Enable */
++#define I2C_IMSC_I2C_P_INT_EN 0x00000020
++/* Enable */
++#define I2C_IMSC_I2C_ERR_INT_EN 0x00000010
++/* Enable */
++#define I2C_IMSC_BREQ_INT_EN 0x00000008
++/* Enable */
++#define I2C_IMSC_LBREQ_INT_EN 0x00000004
++
++/* I2C Fractional Divider Configuration Register */
++/* field offset */
++#define I2C_FDIV_CFG_INC_OFFSET 16
++/* field offset */
++#define I2C_FDIV_CFG_DEC_OFFSET 0
++
++/* I2C Fractional Divider (highspeed mode) Configuration Register */
++/* field offset */
++#define I2C_FDIV_HIGH_CFG_INC_OFFSET 16
++/* field offset */
++#define I2C_FDIV_HIGH_CFG_DEC_OFFSET 0
++
++/* I2C Address Register */
++/* Enable */
++#define I2C_ADDR_CFG_SOPE_EN 0x00200000
++/* Enable */
++#define I2C_ADDR_CFG_SONA_EN 0x00100000
++/* Enable */
++#define I2C_ADDR_CFG_MnS_EN 0x00080000
++
++/* I2C Protocol Interrupt Request Source Status Register */
++/* RX */
++#define I2C_P_IRQSS_RX 0x00000040
++/* TX_END */
++#define I2C_P_IRQSS_TX_END 0x00000020
++/* NACK */
++#define I2C_P_IRQSS_NACK 0x00000010
++/* AL */
++#define I2C_P_IRQSS_AL 0x00000008
++
++/* I2C Raw Interrupt Status Register */
++/* Read: Interrupt occurred. */
++#define I2C_RIS_I2C_P_INT_INTOCC 0x00000020
++/* Read: Interrupt occurred. */
++#define I2C_RIS_I2C_ERR_INT_INTOCC 0x00000010
++
++/* I2C End Data Control Register */
++/*
++ * Set End of Transmission - Note: Do not write '1' to this bit when bus is
++ * free. This will cause an abort after the first byte when a new transfer
++ * is started.
++ */
++#define I2C_ENDD_CTRL_SETEND 0x00000002
++/* TX FIFO Flow Control */
++#define I2C_FIFO_CFG_TXFC 0x00020000
++/* RX FIFO Flow Control */
++#define I2C_FIFO_CFG_RXFC 0x00010000
++/* Word aligned (character alignment of four characters) */
++#define I2C_FIFO_CFG_TXFA_TXFA2 0x00002000
++/* Word aligned (character alignment of four characters) */
++#define I2C_FIFO_CFG_RXFA_RXFA2 0x00000200
++/* 1 word */
++#define I2C_FIFO_CFG_TXBS_TXBS0 0x00000000
++/* 1 word */
++#define I2C_FIFO_CFG_RXBS_RXBS0 0x00000000
++
++
++/* I2C register structure */
++struct gpon_reg_i2c {
++	/* I2C Kernel Clock Control Register */
++	unsigned int clc; /* 0x00000000 */
++	/* Reserved */
++	unsigned int res_0; /* 0x00000004 */
++	/* I2C Identification Register */
++	unsigned int id; /* 0x00000008 */
++	/* Reserved */
++	unsigned int res_1; /* 0x0000000C */
++	/*
++	 * I2C RUN Control Register - This register enables and disables the I2C
++	 * peripheral. Before enabling, the I2C has to be configured properly.
++	 * After enabling no configuration is possible
++	 */
++	unsigned int run_ctrl; /* 0x00000010 */
++	/*
++	 * I2C End Data Control Register - This register is used to either turn
++	 * around the data transmission direction or to address another slave
++	 * without sending a stop condition. Also the software can stop the
++	 * slave-transmitter by sending a not-accolade when working as
++	 * master-receiver or even stop data transmission immediately when
++	 * operating as master-transmitter. The writing to the bits of this
++	 * control register is only effective when in MASTER RECEIVES BYTES,
++	 * MASTER TRANSMITS BYTES, MASTER RESTART or SLAVE RECEIVE BYTES state
++	 */
++	unsigned int endd_ctrl; /* 0x00000014 */
++	/*
++	 * I2C Fractional Divider Configuration Register - These register is
++	 * used to program the fractional divider of the I2C bus. Before the
++	 * peripheral is switched on by setting the RUN-bit the two (fixed)
++	 * values for the two operating frequencies are programmed into these
++	 * (configuration) registers. The Register FDIV_HIGH_CFG has the same
++	 * layout as I2C_FDIV_CFG.
++	 */
++	unsigned int fdiv_cfg; /* 0x00000018 */
++	/*
++	 * I2C Fractional Divider (highspeed mode) Configuration Register
++	 * These register is used to program the fractional divider of the I2C
++	 * bus. Before the peripheral is switched on by setting the RUN-bit the
++	 * two (fixed) values for the two operating frequencies are programmed
++	 * into these (configuration) registers. The Register FDIV_CFG has the
++	 * same layout as I2C_FDIV_CFG.
++	 */
++	unsigned int fdiv_high_cfg; /* 0x0000001C */
++	/* I2C Address Configuration Register */
++	unsigned int addr_cfg; /* 0x00000020 */
++	/*
++	 * I2C Bus Status Register - This register gives a status information
++	 * of the I2C. This additional information can be used by the software
++	 * to start proper actions.
++	 */
++	unsigned int bus_stat; /* 0x00000024 */
++	/* I2C FIFO Configuration Register */
++	unsigned int fifo_cfg; /* 0x00000028 */
++	/* I2C Maximum Received Packet Size Register */
++	unsigned int mrps_ctrl; /* 0x0000002C */
++	/* I2C Received Packet Size Status Register */
++	unsigned int rps_stat; /* 0x00000030 */
++	/* I2C Transmit Packet Size Register */
++	unsigned int tps_ctrl; /* 0x00000034 */
++	/* I2C Filled FIFO Stages Status Register */
++	unsigned int ffs_stat; /* 0x00000038 */
++	/* Reserved */
++	unsigned int res_2; /* 0x0000003C */
++	/* I2C Timing Configuration Register */
++	unsigned int tim_cfg; /* 0x00000040 */
++	/* Reserved */
++		unsigned int res_3[7]; /* 0x00000044 */
++	/* I2C Error Interrupt Request Source Mask Register */
++	unsigned int err_irqsm; /* 0x00000060 */
++	/* I2C Error Interrupt Request Source Status Register */
++	unsigned int err_irqss; /* 0x00000064 */
++	/* I2C Error Interrupt Request Source Clear Register */
++	unsigned int err_irqsc; /* 0x00000068 */
++	/* Reserved */
++	unsigned int res_4; /* 0x0000006C */
++	/* I2C Protocol Interrupt Request Source Mask Register */
++	unsigned int p_irqsm; /* 0x00000070 */
++	/* I2C Protocol Interrupt Request Source Status Register */
++	unsigned int p_irqss; /* 0x00000074 */
++	/* I2C Protocol Interrupt Request Source Clear Register */
++	unsigned int p_irqsc; /* 0x00000078 */
++	/* Reserved */
++	unsigned int res_5; /* 0x0000007C */
++	/* I2C Raw Interrupt Status Register */
++	unsigned int ris; /* 0x00000080 */
++	/* I2C Interrupt Mask Control Register */
++	unsigned int imsc; /* 0x00000084 */
++	/* I2C Masked Interrupt Status Register */
++	unsigned int mis; /* 0x00000088 */
++	/* I2C Interrupt Clear Register */
++	unsigned int icr; /* 0x0000008C */
++	/* I2C Interrupt Set Register */
++	unsigned int isr; /* 0x00000090 */
++	/* I2C DMA Enable Register */
++	unsigned int dmae; /* 0x00000094 */
++	/* Reserved */
++	unsigned int res_6[8154]; /* 0x00000098 */
++	/* I2C Transmit Data Register */
++	unsigned int txd; /* 0x00008000 */
++	/* Reserved */
++	unsigned int res_7[4095]; /* 0x00008004 */
++	/* I2C Receive Data Register */
++	unsigned int rxd; /* 0x0000C000 */
++	/* Reserved */
++	unsigned int res_8[4095]; /* 0x0000C004 */
++};
++
++/* mapping for access macros */
++#define i2c	((struct gpon_reg_i2c *)priv->membase)
++#define reg_r32(reg)		__raw_readl(reg)
++#define reg_w32(val, reg)	__raw_writel(val, reg)
++#define reg_w32_mask(clear, set, reg)	\
++				reg_w32((reg_r32(reg) & ~(clear)) | (set), reg)
++#define reg_r32_table(reg, idx) reg_r32(&((uint32_t *)&reg)[idx])
++#define reg_w32_table(val, reg, idx) reg_w32(val, &((uint32_t *)&reg)[idx])
++
++#define i2c_r32(reg) reg_r32(&i2c->reg)
++#define i2c_w32(val, reg) reg_w32(val, &i2c->reg)
++#define i2c_w32_mask(clear, set, reg) reg_w32_mask(clear, set, &i2c->reg)
++
++#define DRV_NAME "i2c-falcon"
++#define DRV_VERSION "1.01"
++
++#define FALCON_I2C_BUSY_TIMEOUT		20 /* ms */
++
++#ifdef DEBUG
++#define FALCON_I2C_XFER_TIMEOUT		(25 * HZ)
++#else
++#define FALCON_I2C_XFER_TIMEOUT		HZ
++#endif
++#if defined(DEBUG) && 0
++#define PRINTK(arg...) pr_info(arg)
++#else
++#define PRINTK(arg...) do {} while (0)
++#endif
++
++#define FALCON_I2C_IMSC_DEFAULT_MASK	(I2C_IMSC_I2C_P_INT_EN | \
++					 I2C_IMSC_I2C_ERR_INT_EN)
++
++#define FALCON_I2C_ARB_LOST	(1 << 0)
++#define FALCON_I2C_NACK		(1 << 1)
++#define FALCON_I2C_RX_UFL	(1 << 2)
++#define FALCON_I2C_RX_OFL	(1 << 3)
++#define FALCON_I2C_TX_UFL	(1 << 4)
++#define FALCON_I2C_TX_OFL	(1 << 5)
++
++struct falcon_i2c {
++	struct mutex mutex;
++
++	enum {
++		FALCON_I2C_MODE_100	= 1,
++		FALCON_I2C_MODE_400	= 2,
++		FALCON_I2C_MODE_3400	= 3
++	} mode;				/* current speed mode */
++
++	struct clk *clk;		/* clock input for i2c hardware block */
++	struct gpon_reg_i2c __iomem *membase;	/* base of mapped registers */
++	int irq_lb, irq_b, irq_err, irq_p;	/* last burst, burst, error,
++						   protocol IRQs */
++
++	struct i2c_adapter adap;
++	struct device *dev;
++
++	struct completion	cmd_complete;
++
++	/* message transfer data */
++	/* current message */
++	struct i2c_msg		*current_msg;
++	/* number of messages to handle */
++	int			msgs_num;
++	/* current buffer */
++	u8			*msg_buf;
++	/* remaining length of current buffer */
++	u32			msg_buf_len;
++	/* error status of the current transfer */
++	int			msg_err;
++
++	/* master status codes */
++	enum {
++		STATUS_IDLE,
++		STATUS_ADDR,	/* address phase */
++		STATUS_WRITE,
++		STATUS_READ,
++		STATUS_READ_END,
++		STATUS_STOP
++	} status;
++};
++
++static irqreturn_t falcon_i2c_isr(int irq, void *dev_id);
++
++static inline void enable_burst_irq(struct falcon_i2c *priv)
++{
++	i2c_w32_mask(0, I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, imsc);
++}
++static inline void disable_burst_irq(struct falcon_i2c *priv)
++{
++	i2c_w32_mask(I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, 0, imsc);
++}
++
++static void prepare_msg_send_addr(struct falcon_i2c *priv)
++{
++	struct i2c_msg *msg = priv->current_msg;
++	int rd = !!(msg->flags & I2C_M_RD);
++	u16 addr = msg->addr;
++
++	/* new i2c_msg */
++	priv->msg_buf = msg->buf;
++	priv->msg_buf_len = msg->len;
++	if (rd)
++		priv->status = STATUS_READ;
++	else
++		priv->status = STATUS_WRITE;
++
++	/* send slave address */
++	if (msg->flags & I2C_M_TEN) {
++		i2c_w32(0xf0 | ((addr & 0x300) >> 7) | rd, txd);
++		i2c_w32(addr & 0xff, txd);
++	} else
++		i2c_w32((addr & 0x7f) << 1 | rd, txd);
++}
++
++static void set_tx_len(struct falcon_i2c *priv)
++{
++	struct i2c_msg *msg = priv->current_msg;
++	int len = (msg->flags & I2C_M_TEN) ? 2 : 1;
++
++	PRINTK("set_tx_len %cX\n", (msg->flags & I2C_M_RD) ? ('R') : ('T'));
++
++	priv->status = STATUS_ADDR;
++
++	if (!(msg->flags & I2C_M_RD)) {
++		len += msg->len;
++	} else {
++		/* set maximum received packet size (before rx int!) */
++		i2c_w32(msg->len, mrps_ctrl);
++	}
++	i2c_w32(len, tps_ctrl);
++	enable_burst_irq(priv);
++}
++
++static int falcon_i2c_hw_init(struct i2c_adapter *adap)
++{
++	struct falcon_i2c *priv = i2c_get_adapdata(adap);
++
++	/* disable bus */
++	i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
++
++#ifndef DEBUG
++	/* set normal operation clock divider */
++	i2c_w32(1 << I2C_CLC_RMC_OFFSET, clc);
++#else
++	/* for debugging a higher divider value! */
++	i2c_w32(0xF0 << I2C_CLC_RMC_OFFSET, clc);
++#endif
++
++	/* set frequency */
++	if (priv->mode == FALCON_I2C_MODE_100) {
++		dev_dbg(priv->dev, "set standard mode (100 kHz)\n");
++		i2c_w32(0, fdiv_high_cfg);
++		i2c_w32((1 << I2C_FDIV_CFG_INC_OFFSET) |
++			(499 << I2C_FDIV_CFG_DEC_OFFSET),
++			fdiv_cfg);
++	} else if (priv->mode == FALCON_I2C_MODE_400) {
++		dev_dbg(priv->dev, "set fast mode (400 kHz)\n");
++		i2c_w32(0, fdiv_high_cfg);
++		i2c_w32((1 << I2C_FDIV_CFG_INC_OFFSET) |
++			(124 << I2C_FDIV_CFG_DEC_OFFSET),
++			fdiv_cfg);
++	} else if (priv->mode == FALCON_I2C_MODE_3400) {
++		dev_dbg(priv->dev, "set high mode (3.4 MHz)\n");
++		i2c_w32(0, fdiv_cfg);
++		/* TODO recalculate value for 100MHz input */
++		i2c_w32((41 << I2C_FDIV_HIGH_CFG_INC_OFFSET) |
++			(152 << I2C_FDIV_HIGH_CFG_DEC_OFFSET),
++			fdiv_high_cfg);
++	} else {
++		dev_warn(priv->dev, "unknown mode\n");
++		return -ENODEV;
++	}
++
++	/* configure fifo */
++	i2c_w32(I2C_FIFO_CFG_TXFC | /* tx fifo as flow controller */
++		I2C_FIFO_CFG_RXFC | /* rx fifo as flow controller */
++		I2C_FIFO_CFG_TXFA_TXFA2 | /* tx fifo 4-byte aligned */
++		I2C_FIFO_CFG_RXFA_RXFA2 | /* rx fifo 4-byte aligned */
++		I2C_FIFO_CFG_TXBS_TXBS0 | /* tx fifo burst size is 1 word */
++		I2C_FIFO_CFG_RXBS_RXBS0,  /* rx fifo burst size is 1 word */
++		fifo_cfg);
++
++	/* configure address */
++	i2c_w32(I2C_ADDR_CFG_SOPE_EN |	/* generate stop when no more data
++					   in the fifo */
++		I2C_ADDR_CFG_SONA_EN |	/* generate stop when NA received */
++		I2C_ADDR_CFG_MnS_EN |	/* we are master device */
++		0,			/* our slave address (not used!) */
++		addr_cfg);
++
++	/* enable bus */
++	i2c_w32_mask(0, I2C_RUN_CTRL_RUN_EN, run_ctrl);
++
++	return 0;
++}
++
++static int falcon_i2c_wait_bus_not_busy(struct falcon_i2c *priv)
++{
++	int timeout = FALCON_I2C_BUSY_TIMEOUT;
++
++	while ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK)
++				 != I2C_BUS_STAT_BS_FREE) {
++		if (timeout <= 0) {
++			dev_warn(priv->dev, "timeout waiting for bus ready\n");
++			return -ETIMEDOUT;
++		}
++		timeout--;
++		mdelay(1);
++	}
++
++	return 0;
++}
++
++static void falcon_i2c_tx(struct falcon_i2c *priv, int last)
++{
++	if (priv->msg_buf_len && priv->msg_buf) {
++		i2c_w32(*priv->msg_buf, txd);
++
++		if (--priv->msg_buf_len)
++			priv->msg_buf++;
++		else
++			priv->msg_buf = NULL;
++	} else
++		last = 1;
++
++	if (last)
++		disable_burst_irq(priv);
++}
++
++static void falcon_i2c_rx(struct falcon_i2c *priv, int last)
++{
++	u32 fifo_stat, timeout;
++	if (priv->msg_buf_len && priv->msg_buf) {
++		timeout = 5000000;
++		do {
++			fifo_stat = i2c_r32(ffs_stat);
++		} while (!fifo_stat && --timeout);
++		if (!timeout) {
++			last = 1;
++			PRINTK("\nrx timeout\n");
++			goto err;
++		}
++		while (fifo_stat) {
++			*priv->msg_buf = i2c_r32(rxd);
++			if (--priv->msg_buf_len)
++				priv->msg_buf++;
++			else {
++				priv->msg_buf = NULL;
++				last = 1;
++				break;
++			}
++			#if 0
++			fifo_stat = i2c_r32(ffs_stat);
++			#else
++			/* do not read more than burst size, otherwise no "last
++			burst" is generated and the transaction is blocked! */
++			fifo_stat = 0;
++			#endif
++		}
++	} else {
++		last = 1;
++	}
++err:
++	if (last) {
++		disable_burst_irq(priv);
++
++		if (priv->status == STATUS_READ_END) {
++			/* do the STATUS_STOP and complete() here, as sometimes
++			   the tx_end is already seen before this is finished */
++			priv->status = STATUS_STOP;
++			complete(&priv->cmd_complete);
++		} else {
++			i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl);
++			priv->status = STATUS_READ_END;
++		}
++	}
++}
++
++static void falcon_i2c_xfer_init(struct falcon_i2c *priv)
++{
++	/* enable interrupts */
++	i2c_w32(FALCON_I2C_IMSC_DEFAULT_MASK, imsc);
++
++	/* trigger transfer of first msg */
++	set_tx_len(priv);
++}
++
++static void dump_msgs(struct i2c_msg msgs[], int num, int rx)
++{
++#if defined(DEBUG)
++	int i, j;
++	pr_info("Messages %d %s\n", num, rx ? "out" : "in");
++	for (i = 0; i < num; i++) {
++		pr_info("%2d %cX Msg(%d) addr=0x%X: ", i,
++			(msgs[i].flags & I2C_M_RD) ? ('R') : ('T'),
++			msgs[i].len, msgs[i].addr);
++		if (!(msgs[i].flags & I2C_M_RD) || rx) {
++			for (j = 0; j < msgs[i].len; j++)
++				printk("%02X ", msgs[i].buf[j]);
++		}
++		printk("\n");
++	}
++#endif
++}
++
++static void falcon_i2c_release_bus(struct falcon_i2c *priv)
++{
++	if ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_BM)
++		i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl);
++}
++
++static int falcon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
++			   int num)
++{
++	struct falcon_i2c *priv = i2c_get_adapdata(adap);
++	int ret;
++
++	dev_dbg(priv->dev, "xfer %u messages\n", num);
++	dump_msgs(msgs, num, 0);
++
++	mutex_lock(&priv->mutex);
++
++	INIT_COMPLETION(priv->cmd_complete);
++	priv->current_msg = msgs;
++	priv->msgs_num = num;
++	priv->msg_err = 0;
++	priv->status = STATUS_IDLE;
++
++	/* wait for the bus to become ready */
++	ret = falcon_i2c_wait_bus_not_busy(priv);
++	if (ret)
++		goto done;
++
++	while (priv->msgs_num) {
++		/* start the transfers */
++		falcon_i2c_xfer_init(priv);
++
++		/* wait for transfers to complete */
++		ret = wait_for_completion_interruptible_timeout(
++			&priv->cmd_complete, FALCON_I2C_XFER_TIMEOUT);
++		if (ret == 0) {
++			dev_err(priv->dev, "controller timed out\n");
++			falcon_i2c_hw_init(adap);
++			ret = -ETIMEDOUT;
++			goto done;
++		} else if (ret < 0)
++			goto done;
++
++		if (priv->msg_err) {
++			if (priv->msg_err & FALCON_I2C_NACK)
++				ret = -ENXIO;
++			else
++				ret = -EREMOTEIO;
++			goto done;
++		}
++		if (--priv->msgs_num)
++			priv->current_msg++;
++	}
++	/* no error? */
++	ret = num;
++
++done:
++	falcon_i2c_release_bus(priv);
++
++	mutex_unlock(&priv->mutex);
++
++	if (ret >= 0)
++		dump_msgs(msgs, num, 1);
++
++	PRINTK("XFER ret %d\n", ret);
++	return ret;
++}
++
++static irqreturn_t falcon_i2c_isr_burst(int irq, void *dev_id)
++{
++	struct falcon_i2c *priv = dev_id;
++	struct i2c_msg *msg = priv->current_msg;
++	int last = (irq == priv->irq_lb);
++
++	if (last)
++		PRINTK("LB ");
++	else
++		PRINTK("B ");
++
++	if (msg->flags & I2C_M_RD) {
++		switch (priv->status) {
++		case STATUS_ADDR:
++			PRINTK("X");
++			prepare_msg_send_addr(priv);
++			disable_burst_irq(priv);
++			break;
++		case STATUS_READ:
++		case STATUS_READ_END:
++			PRINTK("R");
++			falcon_i2c_rx(priv, last);
++			break;
++		default:
++			disable_burst_irq(priv);
++			PRINTK("Status R %d\n", priv->status);
++			break;
++		}
++	} else {
++		switch (priv->status) {
++		case STATUS_ADDR:
++			PRINTK("x");
++			prepare_msg_send_addr(priv);
++			break;
++		case STATUS_WRITE:
++			PRINTK("w");
++			falcon_i2c_tx(priv, last);
++			break;
++		default:
++			disable_burst_irq(priv);
++			PRINTK("Status W %d\n", priv->status);
++			break;
++		}
++	}
++
++	i2c_w32(I2C_ICR_BREQ_INT_CLR | I2C_ICR_LBREQ_INT_CLR, icr);
++	return IRQ_HANDLED;
++}
++
++static void falcon_i2c_isr_prot(struct falcon_i2c *priv)
++{
++	u32 i_pro = i2c_r32(p_irqss);
++
++	PRINTK("i2c-p");
++
++	/* not acknowledge */
++	if (i_pro & I2C_P_IRQSS_NACK) {
++		priv->msg_err |= FALCON_I2C_NACK;
++		PRINTK(" nack");
++	}
++
++	/* arbitration lost */
++	if (i_pro & I2C_P_IRQSS_AL) {
++		priv->msg_err |= FALCON_I2C_ARB_LOST;
++		PRINTK(" arb-lost");
++	}
++	/* tx -> rx switch */
++	if (i_pro & I2C_P_IRQSS_RX)
++		PRINTK(" rx");
++
++	/* tx end */
++	if (i_pro & I2C_P_IRQSS_TX_END)
++		PRINTK(" txend");
++	PRINTK("\n");
++
++	if (!priv->msg_err) {
++		/* tx -> rx switch */
++		if (i_pro & I2C_P_IRQSS_RX) {
++			priv->status = STATUS_READ;
++			enable_burst_irq(priv);
++		}
++		if (i_pro & I2C_P_IRQSS_TX_END) {
++			if (priv->status == STATUS_READ)
++				priv->status = STATUS_READ_END;
++			else {
++				disable_burst_irq(priv);
++				priv->status = STATUS_STOP;
++			}
++		}
++	}
++
++	i2c_w32(i_pro, p_irqsc);
++}
++
++static irqreturn_t falcon_i2c_isr(int irq, void *dev_id)
++{
++	u32 i_raw, i_err = 0;
++	struct falcon_i2c *priv = dev_id;
++
++	i_raw = i2c_r32(mis);
++	PRINTK("i_raw 0x%08X\n", i_raw);
++
++	/* error interrupt */
++	if (i_raw & I2C_RIS_I2C_ERR_INT_INTOCC) {
++		i_err = i2c_r32(err_irqss);
++		PRINTK("i_err 0x%08X bus_stat 0x%04X\n",
++			i_err, i2c_r32(bus_stat));
++
++		/* tx fifo overflow (8) */
++		if (i_err & I2C_ERR_IRQSS_TXF_OFL)
++			priv->msg_err |= FALCON_I2C_TX_OFL;
++
++		/* tx fifo underflow (4) */
++		if (i_err & I2C_ERR_IRQSS_TXF_UFL)
++			priv->msg_err |= FALCON_I2C_TX_UFL;
++
++		/* rx fifo overflow (2) */
++		if (i_err & I2C_ERR_IRQSS_RXF_OFL)
++			priv->msg_err |= FALCON_I2C_RX_OFL;
++
++		/* rx fifo underflow (1) */
++		if (i_err & I2C_ERR_IRQSS_RXF_UFL)
++			priv->msg_err |= FALCON_I2C_RX_UFL;
++
++		i2c_w32(i_err, err_irqsc);
++	}
++
++	/* protocol interrupt */
++	if (i_raw & I2C_RIS_I2C_P_INT_INTOCC)
++		falcon_i2c_isr_prot(priv);
++
++	if ((priv->msg_err) || (priv->status == STATUS_STOP))
++		complete(&priv->cmd_complete);
++
++	return IRQ_HANDLED;
++}
++
++static u32 falcon_i2c_functionality(struct i2c_adapter *adap)
++{
++	return	I2C_FUNC_I2C |
++		I2C_FUNC_10BIT_ADDR |
++		I2C_FUNC_SMBUS_EMUL;
++}
++
++static struct i2c_algorithm falcon_i2c_algorithm = {
++	.master_xfer	= falcon_i2c_xfer,
++	.functionality	= falcon_i2c_functionality,
++};
++
++static int __devinit falcon_i2c_probe(struct platform_device *pdev)
++{
++	int ret = 0;
++	struct falcon_i2c *priv;
++	struct i2c_adapter *adap;
++	struct resource *mmres, *ioarea,
++			*irqres_lb, *irqres_b, *irqres_err, *irqres_p;
++	struct clk *clk;
++
++	dev_dbg(&pdev->dev, "probing\n");
++
++	mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	irqres_lb = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
++						 "i2c_lb");
++	irqres_b = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "i2c_b");
++	irqres_err = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
++						  "i2c_err");
++	irqres_p = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "i2c_p");
++
++	if (!mmres || !irqres_lb || !irqres_b || !irqres_err || !irqres_p) {
++		dev_err(&pdev->dev, "no resources\n");
++		return -ENODEV;
++	}
++
++	clk = clk_get_fpi();
++	if (IS_ERR(clk)) {
++		dev_err(&pdev->dev, "failed to get fpi clk\n");
++		return -ENOENT;
++	}
++
++	if (clk_get_rate(clk) != 100000000) {
++		dev_err(&pdev->dev, "input clock is not 100MHz\n");
++		return -ENOENT;
++	}
++	clk = clk_get(&pdev->dev, NULL);
++	if (IS_ERR(clk)) {
++		dev_err(&pdev->dev, "failed to get i2c clk\n");
++		return -ENOENT;
++	}
++
++	/* allocate private data */
++	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
++	if (!priv) {
++		dev_err(&pdev->dev, "can't allocate private data\n");
++		return -ENOMEM;
++	}
++
++	adap = &priv->adap;
++	i2c_set_adapdata(adap, priv);
++	adap->owner = THIS_MODULE;
++	adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
++	strlcpy(adap->name, DRV_NAME "-adapter", sizeof(adap->name));
++	adap->algo = &falcon_i2c_algorithm;
++
++	priv->mode = FALCON_I2C_MODE_100;
++	priv->clk = clk;
++	priv->dev = &pdev->dev;
++
++	init_completion(&priv->cmd_complete);
++	mutex_init(&priv->mutex);
++
++	if (ltq_gpio_request(&pdev->dev, 107, 0, 0, DRV_NAME":sda") ||
++		ltq_gpio_request(&pdev->dev, 108, 0, 0, DRV_NAME":scl"))
++	{
++		dev_err(&pdev->dev, "I2C gpios not available\n");
++		ret = -ENXIO;
++		goto err_free_priv;
++	}
++
++	ioarea = request_mem_region(mmres->start, resource_size(mmres),
++					 pdev->name);
++
++	if (ioarea == NULL) {
++		dev_err(&pdev->dev, "I2C region already claimed\n");
++		ret = -ENXIO;
++		goto err_free_gpio;
++	}
++
++	/* map memory */
++	priv->membase = ioremap_nocache(mmres->start & ~KSEG1,
++		resource_size(mmres));
++	if (priv->membase == NULL) {
++		ret = -ENOMEM;
++		goto err_release_region;
++	}
++
++	priv->irq_lb = irqres_lb->start;
++	ret = request_irq(priv->irq_lb, falcon_i2c_isr_burst, IRQF_DISABLED,
++			  irqres_lb->name, priv);
++	if (ret) {
++		dev_err(&pdev->dev, "can't get last burst IRQ %d\n",
++					irqres_lb->start);
++		ret = -ENODEV;
++		goto err_unmap_mem;
++	}
++
++	priv->irq_b = irqres_b->start;
++	ret = request_irq(priv->irq_b, falcon_i2c_isr_burst, IRQF_DISABLED,
++			  irqres_b->name, priv);
++	if (ret) {
++		dev_err(&pdev->dev, "can't get burst IRQ %d\n",
++					irqres_b->start);
++		ret = -ENODEV;
++		goto err_free_lb_irq;
++	}
++
++	priv->irq_err = irqres_err->start;
++	ret = request_irq(priv->irq_err, falcon_i2c_isr, IRQF_DISABLED,
++			  irqres_err->name, priv);
++	if (ret) {
++		dev_err(&pdev->dev, "can't get error IRQ %d\n",
++					irqres_err->start);
++		ret = -ENODEV;
++		goto err_free_b_irq;
++	}
++
++	priv->irq_p = irqres_p->start;
++	ret = request_irq(priv->irq_p, falcon_i2c_isr, IRQF_DISABLED,
++			  irqres_p->name, priv);
++	if (ret) {
++		dev_err(&pdev->dev, "can't get protocol IRQ %d\n",
++					irqres_p->start);
++		ret = -ENODEV;
++		goto err_free_err_irq;
++	}
++
++	dev_dbg(&pdev->dev, "mapped io-space to %p\n", priv->membase);
++	dev_dbg(&pdev->dev, "use IRQs %d, %d, %d, %d\n", irqres_lb->start,
++	    irqres_b->start, irqres_err->start, irqres_p->start);
++
++	/* add our adapter to the i2c stack */
++	ret = i2c_add_numbered_adapter(adap);
++	if (ret) {
++		dev_err(&pdev->dev, "can't register I2C adapter\n");
++		goto err_free_p_irq;
++	}
++
++	platform_set_drvdata(pdev, priv);
++	i2c_set_adapdata(adap, priv);
++
++	/* print module version information */
++	dev_dbg(&pdev->dev, "module id=%u revision=%u\n",
++		(i2c_r32(id) & I2C_ID_ID_MASK) >> I2C_ID_ID_OFFSET,
++		(i2c_r32(id) & I2C_ID_REV_MASK) >> I2C_ID_REV_OFFSET);
++
++	/* initialize HW */
++	ret = falcon_i2c_hw_init(adap);
++	if (ret) {
++		dev_err(&pdev->dev, "can't configure adapter\n");
++		goto err_remove_adapter;
++	}
++
++	dev_info(&pdev->dev, "version %s\n", DRV_VERSION);
++
++	return 0;
++
++err_remove_adapter:
++	i2c_del_adapter(adap);
++	platform_set_drvdata(pdev, NULL);
++
++err_free_p_irq:
++	free_irq(priv->irq_p, priv);
++
++err_free_err_irq:
++	free_irq(priv->irq_err, priv);
++
++err_free_b_irq:
++	free_irq(priv->irq_b, priv);
++
++err_free_lb_irq:
++	free_irq(priv->irq_lb, priv);
++
++err_unmap_mem:
++	iounmap(priv->membase);
++
++err_release_region:
++	release_mem_region(mmres->start, resource_size(mmres));
++
++err_free_gpio:
++	gpio_free(108);
++	gpio_free(107);
++
++err_free_priv:
++	kfree(priv);
++
++	return ret;
++}
++
++static int __devexit falcon_i2c_remove(struct platform_device *pdev)
++{
++	struct falcon_i2c *priv = platform_get_drvdata(pdev);
++	struct resource *mmres;
++
++	/* disable bus */
++	i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
++
++	/* remove driver */
++	platform_set_drvdata(pdev, NULL);
++	i2c_del_adapter(&priv->adap);
++
++	free_irq(priv->irq_lb, priv);
++	free_irq(priv->irq_b, priv);
++	free_irq(priv->irq_err, priv);
++	free_irq(priv->irq_p, priv);
++
++	iounmap(priv->membase);
++
++	gpio_free(108);
++	gpio_free(107);
++
++	kfree(priv);
++
++	mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	release_mem_region(mmres->start, resource_size(mmres));
++
++	dev_dbg(&pdev->dev, "removed\n");
++
++	return 0;
++}
++
++static struct platform_driver falcon_i2c_driver = {
++	.probe	= falcon_i2c_probe,
++	.remove	= __devexit_p(falcon_i2c_remove),
++	.driver	= {
++		.name	= DRV_NAME,
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init falcon_i2c_init(void)
++{
++	int ret;
++
++	ret = platform_driver_register(&falcon_i2c_driver);
++
++	if (ret)
++		pr_debug(DRV_NAME ": can't register platform driver\n");
++
++	return ret;
++}
++
++static void __exit falcon_i2c_exit(void)
++{
++	platform_driver_unregister(&falcon_i2c_driver);
++}
++
++module_init(falcon_i2c_init);
++module_exit(falcon_i2c_exit);
++
++MODULE_DESCRIPTION("Lantiq FALC(tm) ON - I2C bus adapter");
++MODULE_ALIAS("platform:" DRV_NAME);
++MODULE_LICENSE("GPL");
++MODULE_VERSION(DRV_VERSION);
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0037-MIPS-lantiq-add-xway-nand-driver.patch b/target/linux/lantiq/patches-3.3/0037-MIPS-lantiq-add-xway-nand-driver.patch
new file mode 100644
index 0000000000..9fc6da04bb
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0037-MIPS-lantiq-add-xway-nand-driver.patch
@@ -0,0 +1,310 @@
+From 50a9d37efdfa502fafe48a1de604cd5d84a0d5e9 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 27 Aug 2011 20:08:14 +0200
+Subject: [PATCH 37/70] MIPS: lantiq: add xway nand driver
+
+This patch adds a nand driver for XWAY SoCs. The patch makes use of the
+plat_nand driver. As with the EBU NOR driver merged in 3.0, we have the
+endianess swap problem on read. To workaround this problem we make the
+read_byte() callback available via the plat_nand driver causing the nand
+layer to do byte reads.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+
+TODO : memory ranges
+       cs lines
+       plat dev
+       ebu2 and not ebu1 ?
+---
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h |    2 +
+ arch/mips/lantiq/xway/Makefile                     |    2 +-
+ arch/mips/lantiq/xway/devices.h                    |    1 +
+ arch/mips/lantiq/xway/nand.c                       |  216 ++++++++++++++++++++
+ drivers/mtd/nand/plat_nand.c                       |    1 +
+ include/linux/mtd/nand.h                           |    1 +
+ 6 files changed, 222 insertions(+), 1 deletions(-)
+ create mode 100644 arch/mips/lantiq/xway/nand.c
+
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index 3f22acb..ab2d236 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -145,6 +145,8 @@
+ /* register access macros for EBU and CGU */
+ #define ltq_ebu_w32(x, y)	ltq_w32((x), ltq_ebu_membase + (y))
+ #define ltq_ebu_r32(x)		ltq_r32(ltq_ebu_membase + (x))
++#define ltq_ebu_w32_mask(x, y, z) \
++	ltq_w32_mask(x, y, ltq_ebu_membase + (z))
+ #define ltq_cgu_w32(x, y)	ltq_w32((x), ltq_cgu_membase + (y))
+ #define ltq_cgu_r32(x)		ltq_r32(ltq_cgu_membase + (x))
+ 
+diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
+index 9d1a0a2..277aa34 100644
+--- a/arch/mips/lantiq/xway/Makefile
++++ b/arch/mips/lantiq/xway/Makefile
+@@ -1,4 +1,4 @@
+-obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o prom.o
++obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o prom.o nand.o
+ 
+ obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
+ obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
+diff --git a/arch/mips/lantiq/xway/devices.h b/arch/mips/lantiq/xway/devices.h
+index e904934..d825cbd 100644
+--- a/arch/mips/lantiq/xway/devices.h
++++ b/arch/mips/lantiq/xway/devices.h
+@@ -16,5 +16,6 @@ extern void ltq_register_gpio(void);
+ extern void ltq_register_gpio_stp(void);
+ extern void ltq_register_ase_asc(void);
+ extern void ltq_register_etop(struct ltq_eth_data *eth);
++extern void xway_register_nand(struct mtd_partition *parts, int count);
+ 
+ #endif
+diff --git a/arch/mips/lantiq/xway/nand.c b/arch/mips/lantiq/xway/nand.c
+new file mode 100644
+index 0000000..9ab91d8
+--- /dev/null
++++ b/arch/mips/lantiq/xway/nand.c
+@@ -0,0 +1,216 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/mtd/physmap.h>
++#include <linux/mtd/nand.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++
++#include <lantiq_soc.h>
++#include <lantiq_irq.h>
++#include <lantiq_platform.h>
++
++#include "devices.h"
++
++/* nand registers */
++#define LTQ_EBU_NAND_WAIT	0xB4
++#define LTQ_EBU_NAND_ECC0	0xB8
++#define LTQ_EBU_NAND_ECC_AC	0xBC
++#define LTQ_EBU_NAND_CON	0xB0
++#define LTQ_EBU_ADDSEL1		0x24
++
++/* gpio definitions */
++#define PIN_ALE			13
++#define PIN_CLE			24
++#define PIN_CS1			23
++#define PIN_RDY			48  /* NFLASH_READY */
++#define PIN_RD			49  /* NFLASH_READ_N */
++
++#define NAND_CMD_ALE		(1 << 2)
++#define NAND_CMD_CLE		(1 << 3)
++#define NAND_CMD_CS		(1 << 4)
++#define NAND_WRITE_CMD_RESET	0xff
++#define NAND_WRITE_CMD		(NAND_CMD_CS | NAND_CMD_CLE)
++#define NAND_WRITE_ADDR		(NAND_CMD_CS | NAND_CMD_ALE)
++#define NAND_WRITE_DATA		(NAND_CMD_CS)
++#define NAND_READ_DATA		(NAND_CMD_CS)
++#define NAND_WAIT_WR_C		(1 << 3)
++#define NAND_WAIT_RD		(0x1)
++
++#define ADDSEL1_MASK(x)		(x << 4)
++#define ADDSEL1_REGEN		1
++#define BUSCON1_SETUP		(1 << 22)
++#define BUSCON1_BCGEN_RES	(0x3 << 12)
++#define BUSCON1_WAITWRC2	(2 << 8)
++#define BUSCON1_WAITRDC2	(2 << 6)
++#define BUSCON1_HOLDC1		(1 << 4)
++#define BUSCON1_RECOVC1		(1 << 2)
++#define BUSCON1_CMULT4		1
++#define NAND_CON_NANDM		1
++#define NAND_CON_CSMUX		(1 << 1)
++#define NAND_CON_CS_P		(1 << 4)
++#define NAND_CON_SE_P		(1 << 5)
++#define NAND_CON_WP_P		(1 << 6)
++#define NAND_CON_PRE_P		(1 << 7)
++#define NAND_CON_IN_CS0		0
++#define NAND_CON_OUT_CS0	0
++#define NAND_CON_IN_CS1		(1 << 8)
++#define NAND_CON_OUT_CS1	(1 << 10)
++#define NAND_CON_CE		(1 << 20)
++
++#define NAND_BASE_ADDRESS	(KSEG1 | 0x14000000)
++
++static const char *part_probes[] = { "cmdlinepart", NULL };
++
++static void xway_select_chip(struct mtd_info *mtd, int chip)
++{
++	switch (chip) {
++	case -1:
++		ltq_ebu_w32_mask(NAND_CON_CE, 0, LTQ_EBU_NAND_CON);
++		ltq_ebu_w32_mask(NAND_CON_NANDM, 0, LTQ_EBU_NAND_CON);
++		break;
++	case 0:
++		ltq_ebu_w32_mask(0, NAND_CON_NANDM, LTQ_EBU_NAND_CON);
++		ltq_ebu_w32_mask(0, NAND_CON_CE, LTQ_EBU_NAND_CON);
++		/* reset the nand chip */
++		while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
++			;
++		ltq_w32(NAND_WRITE_CMD_RESET,
++			((u32 *) (NAND_BASE_ADDRESS | NAND_WRITE_CMD)));
++		break;
++	default:
++		BUG();
++	}
++}
++
++static void xway_cmd_ctrl(struct mtd_info *mtd, int data, unsigned int ctrl)
++{
++	struct nand_chip *this = mtd->priv;
++
++	if (ctrl & NAND_CTRL_CHANGE) {
++		if (ctrl & NAND_CLE)
++			this->IO_ADDR_W = (void __iomem *)
++					(NAND_BASE_ADDRESS | NAND_WRITE_CMD);
++		else if (ctrl & NAND_ALE)
++			this->IO_ADDR_W = (void __iomem *)
++					(NAND_BASE_ADDRESS | NAND_WRITE_ADDR);
++	}
++
++	if (data != NAND_CMD_NONE) {
++		*(volatile u8*) ((u32) this->IO_ADDR_W) = data;
++		while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
++			;
++	}
++}
++
++static int xway_dev_ready(struct mtd_info *mtd)
++{
++	return ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_RD;
++}
++
++void nand_write(unsigned int addr, unsigned int val)
++{
++	ltq_w32(val, ((u32 *) (NAND_BASE_ADDRESS | addr)));
++	while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
++		;
++}
++
++unsigned char xway_read_byte(struct mtd_info *mtd)
++{
++	return ltq_r8((void __iomem *)(NAND_BASE_ADDRESS | (NAND_READ_DATA)));
++}
++
++static void xway_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
++{
++	int i;
++
++	for (i = 0; i < len; i++)
++	{
++		unsigned char res8 =  ltq_r8((void __iomem *)(NAND_BASE_ADDRESS | (NAND_READ_DATA)));
++		buf[i] = res8;
++	}
++}
++
++static void xway_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
++{
++	int i;
++
++	for (i = 0; i < len; i++)
++	{
++		ltq_w8(buf[i], ((u32*)(NAND_BASE_ADDRESS | (NAND_WRITE_DATA))));
++		while((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0);
++	}
++}
++
++int xway_probe(struct platform_device *pdev)
++{
++	/* might need this later ?
++	ltq_gpio_request(PIN_CS1, 2, 1, "NAND_CS1");
++	*/
++	ltq_gpio_request(&pdev->dev, PIN_CLE, 2, 1, "NAND_CLE");
++	ltq_gpio_request(&pdev->dev, PIN_ALE, 2, 1, "NAND_ALE");
++	if (ltq_is_ar9() || ltq_is_vr9()) {
++		ltq_gpio_request(&pdev->dev, PIN_RDY, 2, 0, "NAND_BSY");
++		ltq_gpio_request(&pdev->dev, PIN_RD, 2, 1, "NAND_RD");
++	}
++
++	ltq_ebu_w32((NAND_BASE_ADDRESS & 0x1fffff00)
++		| ADDSEL1_MASK(3) | ADDSEL1_REGEN, LTQ_EBU_ADDSEL1);
++
++	ltq_ebu_w32(BUSCON1_SETUP | BUSCON1_BCGEN_RES | BUSCON1_WAITWRC2
++		| BUSCON1_WAITRDC2 | BUSCON1_HOLDC1 | BUSCON1_RECOVC1
++		| BUSCON1_CMULT4, LTQ_EBU_BUSCON1);
++
++	ltq_ebu_w32(NAND_CON_NANDM | NAND_CON_CSMUX | NAND_CON_CS_P
++		| NAND_CON_SE_P | NAND_CON_WP_P | NAND_CON_PRE_P
++		| NAND_CON_IN_CS0 | NAND_CON_OUT_CS0, LTQ_EBU_NAND_CON);
++
++	ltq_w32(NAND_WRITE_CMD_RESET,
++		((u32 *) (NAND_BASE_ADDRESS | NAND_WRITE_CMD)));
++	while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
++		;
++
++	return 0;
++}
++
++static struct platform_nand_data falcon_flash_nand_data = {
++	.chip = {
++		.nr_chips		= 1,
++		.chip_delay		= 30,
++		.part_probe_types	= part_probes,
++	},
++	.ctrl = {
++		.probe		= xway_probe,
++		.cmd_ctrl	= xway_cmd_ctrl,
++		.dev_ready	= xway_dev_ready,
++		.select_chip	= xway_select_chip,
++		.read_byte	= xway_read_byte,
++		.read_buf	= xway_read_buf,
++		.write_buf	= xway_write_buf,
++	}
++};
++
++static struct resource ltq_nand_res =
++	MEM_RES("nand", 0x14000000, 0x7ffffff);
++
++static struct platform_device ltq_flash_nand = {
++	.name		= "gen_nand",
++	.id		= -1,
++	.num_resources	= 1,
++	.resource	= &ltq_nand_res,
++	.dev		= {
++		.platform_data = &falcon_flash_nand_data,
++	},
++};
++
++void __init xway_register_nand(struct mtd_partition *parts, int count)
++{
++	falcon_flash_nand_data.chip.partitions = parts;
++	falcon_flash_nand_data.chip.nr_partitions = count;
++	platform_device_register(&ltq_flash_nand);
++}
+diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c
+index 7f2da69..916a2ef 100644
+--- a/drivers/mtd/nand/plat_nand.c
++++ b/drivers/mtd/nand/plat_nand.c
+@@ -75,6 +75,7 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
+ 	data->chip.select_chip = pdata->ctrl.select_chip;
+ 	data->chip.write_buf = pdata->ctrl.write_buf;
+ 	data->chip.read_buf = pdata->ctrl.read_buf;
++	data->chip.read_byte = pdata->ctrl.read_byte;
+ 	data->chip.chip_delay = pdata->chip.chip_delay;
+ 	data->chip.options |= pdata->chip.options;
+ 	data->chip.bbt_options |= pdata->chip.bbt_options;
+diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
+index 63b5a8b..597f079 100644
+--- a/include/linux/mtd/nand.h
++++ b/include/linux/mtd/nand.h
+@@ -651,6 +651,7 @@ struct platform_nand_ctrl {
+ 	void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
+ 	void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
+ 	void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
++	unsigned char (*read_byte)(struct mtd_info *mtd);
+ 	void *priv;
+ };
+ 
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0038-SPI-MIPS-lantiq-adds-spi-xway.patch b/target/linux/lantiq/patches-3.3/0038-SPI-MIPS-lantiq-adds-spi-xway.patch
new file mode 100644
index 0000000000..df0e185ead
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0038-SPI-MIPS-lantiq-adds-spi-xway.patch
@@ -0,0 +1,1151 @@
+From 3e3dd3612431578cac22ed73064a38c0e30c5284 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 10 Oct 2011 22:29:13 +0200
+Subject: [PATCH 38/70] SPI: MIPS: lantiq: adds spi xway
+
+---
+ .../mips/include/asm/mach-lantiq/lantiq_platform.h |    9 +
+ .../mips/include/asm/mach-lantiq/xway/lantiq_irq.h |    2 +
+ drivers/spi/Kconfig                                |    8 +
+ drivers/spi/Makefile                               |    1 +
+ drivers/spi/spi-xway.c                             | 1068 ++++++++++++++++++++
+ 5 files changed, 1088 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/spi/spi-xway.c
+
+diff --git a/arch/mips/include/asm/mach-lantiq/lantiq_platform.h b/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
+index a305f1d..38ed938 100644
+--- a/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
++++ b/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
+@@ -50,4 +50,13 @@ struct ltq_eth_data {
+ 	int mii_mode;
+ };
+ 
++
++struct ltq_spi_platform_data {
++	u16 num_chipselect;
++};
++
++struct ltq_spi_controller_data {
++	unsigned gpio;
++};
++
+ #endif
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
+index 2a8d5ad..b7f10e6 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
+@@ -27,6 +27,8 @@
+ 
+ #define LTQ_SSC_TIR		(INT_NUM_IM0_IRL0 + 15)
+ #define LTQ_SSC_RIR		(INT_NUM_IM0_IRL0 + 14)
++#define LTQ_SSC_TIR_AR9		(INT_NUM_IM0_IRL0 + 14)
++#define LTQ_SSC_RIR_AR9		(INT_NUM_IM0_IRL0 + 15)
+ #define LTQ_SSC_EIR		(INT_NUM_IM0_IRL0 + 16)
+ 
+ #define LTQ_MEI_DYING_GASP_INT	(INT_NUM_IM1_IRL0 + 21)
+diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
+index 41f8336..f0eaeeb 100644
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -382,6 +382,14 @@ config SPI_NUC900
+ 	help
+ 	  SPI driver for Nuvoton NUC900 series ARM SoCs
+ 
++config SPI_XWAY
++	tristate "Lantiq XWAY SPI controller"
++	depends on LANTIQ && SOC_TYPE_XWAY
++	select SPI_BITBANG
++	help
++	  This driver supports the Lantiq SoC SPI controller in master
++	  mode.
++
+ #
+ # Add new SPI master controllers in alphabetical order above this line
+ #
+diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
+index 570894c..a465d9a 100644
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -59,4 +59,5 @@ obj-$(CONFIG_SPI_TLE62X0)		+= spi-tle62x0.o
+ obj-$(CONFIG_SPI_TOPCLIFF_PCH)		+= spi-topcliff-pch.o
+ obj-$(CONFIG_SPI_TXX9)			+= spi-txx9.o
+ obj-$(CONFIG_SPI_XILINX)		+= spi-xilinx.o
++obj-$(CONFIG_SPI_XWAY)			+= spi-xway.o
+ 
+diff --git a/drivers/spi/spi-xway.c b/drivers/spi/spi-xway.c
+new file mode 100644
+index 0000000..016a6d0
+--- /dev/null
++++ b/drivers/spi/spi-xway.c
+@@ -0,0 +1,1068 @@
++/*
++ * Lantiq SoC SPI controller
++ *
++ * Copyright (C) 2011 Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/workqueue.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/sched.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/completion.h>
++#include <linux/spinlock.h>
++#include <linux/err.h>
++#include <linux/clk.h>
++#include <linux/gpio.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++
++#include <lantiq_soc.h>
++#include <lantiq_platform.h>
++
++#define LTQ_SPI_CLC		0x00	/* Clock control */
++#define LTQ_SPI_PISEL		0x04	/* Port input select */
++#define LTQ_SPI_ID		0x08	/* Identification */
++#define LTQ_SPI_CON		0x10	/* Control */
++#define LTQ_SPI_STAT		0x14	/* Status */
++#define LTQ_SPI_WHBSTATE	0x18	/* Write HW modified state */
++#define LTQ_SPI_TB		0x20	/* Transmit buffer */
++#define LTQ_SPI_RB		0x24	/* Receive buffer */
++#define LTQ_SPI_RXFCON		0x30	/* Receive FIFO control */
++#define LTQ_SPI_TXFCON		0x34	/* Transmit FIFO control */
++#define LTQ_SPI_FSTAT		0x38	/* FIFO status */
++#define LTQ_SPI_BRT		0x40	/* Baudrate timer */
++#define LTQ_SPI_BRSTAT		0x44	/* Baudrate timer status */
++#define LTQ_SPI_SFCON		0x60	/* Serial frame control */
++#define LTQ_SPI_SFSTAT		0x64	/* Serial frame status */
++#define LTQ_SPI_GPOCON		0x70	/* General purpose output control */
++#define LTQ_SPI_GPOSTAT		0x74	/* General purpose output status */
++#define LTQ_SPI_FGPO		0x78	/* Forced general purpose output */
++#define LTQ_SPI_RXREQ		0x80	/* Receive request */
++#define LTQ_SPI_RXCNT		0x84	/* Receive count */
++#define LTQ_SPI_DMACON		0xEC	/* DMA control */
++#define LTQ_SPI_IRNEN		0xF4	/* Interrupt node enable */
++#define LTQ_SPI_IRNICR		0xF8	/* Interrupt node interrupt capture */
++#define LTQ_SPI_IRNCR		0xFC	/* Interrupt node control */
++
++#define LTQ_SPI_CLC_SMC_SHIFT	16	/* Clock divider for sleep mode */
++#define LTQ_SPI_CLC_SMC_MASK	0xFF
++#define LTQ_SPI_CLC_RMC_SHIFT	8	/* Clock divider for normal run mode */
++#define LTQ_SPI_CLC_RMC_MASK	0xFF
++#define LTQ_SPI_CLC_DISS	BIT(1)	/* Disable status bit */
++#define LTQ_SPI_CLC_DISR	BIT(0)	/* Disable request bit */
++
++#define LTQ_SPI_ID_TXFS_SHIFT	24	/* Implemented TX FIFO size */
++#define LTQ_SPI_ID_TXFS_MASK	0x3F
++#define LTQ_SPI_ID_RXFS_SHIFT	16	/* Implemented RX FIFO size */
++#define LTQ_SPI_ID_RXFS_MASK	0x3F
++#define LTQ_SPI_ID_REV_MASK	0x1F	/* Hardware revision number */
++#define LTQ_SPI_ID_CFG		BIT(5)	/* DMA interface support */
++
++#define LTQ_SPI_CON_BM_SHIFT	16	/* Data width selection */
++#define LTQ_SPI_CON_BM_MASK	0x1F
++#define LTQ_SPI_CON_EM		BIT(24)	/* Echo mode */
++#define LTQ_SPI_CON_IDLE	BIT(23)	/* Idle bit value */
++#define LTQ_SPI_CON_ENBV	BIT(22)	/* Enable byte valid control */
++#define LTQ_SPI_CON_RUEN	BIT(12)	/* Receive underflow error enable */
++#define LTQ_SPI_CON_TUEN	BIT(11)	/* Transmit underflow error enable */
++#define LTQ_SPI_CON_AEN		BIT(10)	/* Abort error enable */
++#define LTQ_SPI_CON_REN		BIT(9)	/* Receive overflow error enable */
++#define LTQ_SPI_CON_TEN		BIT(8)	/* Transmit overflow error enable */
++#define LTQ_SPI_CON_LB		BIT(7)	/* Loopback control */
++#define LTQ_SPI_CON_PO		BIT(6)	/* Clock polarity control */
++#define LTQ_SPI_CON_PH		BIT(5)	/* Clock phase control */
++#define LTQ_SPI_CON_HB		BIT(4)	/* Heading control */
++#define LTQ_SPI_CON_RXOFF	BIT(1)	/* Switch receiver off */
++#define LTQ_SPI_CON_TXOFF	BIT(0)	/* Switch transmitter off */
++
++#define LTQ_SPI_STAT_RXBV_MASK	0x7
++#define LTQ_SPI_STAT_RXBV_SHIFT	28
++#define LTQ_SPI_STAT_BSY	BIT(13)	/* Busy flag */
++#define LTQ_SPI_STAT_RUE	BIT(12)	/* Receive underflow error flag */
++#define LTQ_SPI_STAT_TUE	BIT(11)	/* Transmit underflow error flag */
++#define LTQ_SPI_STAT_AE		BIT(10)	/* Abort error flag */
++#define LTQ_SPI_STAT_RE		BIT(9)	/* Receive error flag */
++#define LTQ_SPI_STAT_TE		BIT(8)	/* Transmit error flag */
++#define LTQ_SPI_STAT_MS		BIT(1)	/* Master/slave select bit */
++#define LTQ_SPI_STAT_EN		BIT(0)	/* Enable bit */
++
++#define LTQ_SPI_WHBSTATE_SETTUE	BIT(15)	/* Set transmit underflow error flag */
++#define LTQ_SPI_WHBSTATE_SETAE	BIT(14)	/* Set abort error flag */
++#define LTQ_SPI_WHBSTATE_SETRE	BIT(13)	/* Set receive error flag */
++#define LTQ_SPI_WHBSTATE_SETTE	BIT(12)	/* Set transmit error flag */
++#define LTQ_SPI_WHBSTATE_CLRTUE	BIT(11)	/* Clear transmit underflow error flag */
++#define LTQ_SPI_WHBSTATE_CLRAE	BIT(10)	/* Clear abort error flag */
++#define LTQ_SPI_WHBSTATE_CLRRE	BIT(9)	/* Clear receive error flag */
++#define LTQ_SPI_WHBSTATE_CLRTE	BIT(8)	/* Clear transmit error flag */
++#define LTQ_SPI_WHBSTATE_SETME	BIT(7)	/* Set mode error flag */
++#define LTQ_SPI_WHBSTATE_CLRME	BIT(6)	/* Clear mode error flag */
++#define LTQ_SPI_WHBSTATE_SETRUE	BIT(5)	/* Set receive underflow error flag */
++#define LTQ_SPI_WHBSTATE_CLRRUE	BIT(4)	/* Clear receive underflow error flag */
++#define LTQ_SPI_WHBSTATE_SETMS	BIT(3)	/* Set master select bit */
++#define LTQ_SPI_WHBSTATE_CLRMS	BIT(2)	/* Clear master select bit */
++#define LTQ_SPI_WHBSTATE_SETEN	BIT(1)	/* Set enable bit (operational mode) */
++#define LTQ_SPI_WHBSTATE_CLREN	BIT(0)	/* Clear enable bit (config mode */
++#define LTQ_SPI_WHBSTATE_CLR_ERRORS	0x0F50
++
++#define LTQ_SPI_RXFCON_RXFITL_SHIFT	8	/* FIFO interrupt trigger level */
++#define LTQ_SPI_RXFCON_RXFITL_MASK	0x3F
++#define LTQ_SPI_RXFCON_RXFLU		BIT(1)	/* FIFO flush */
++#define LTQ_SPI_RXFCON_RXFEN		BIT(0)	/* FIFO enable */
++
++#define LTQ_SPI_TXFCON_TXFITL_SHIFT	8	/* FIFO interrupt trigger level */
++#define LTQ_SPI_TXFCON_TXFITL_MASK	0x3F
++#define LTQ_SPI_TXFCON_TXFLU		BIT(1)	/* FIFO flush */
++#define LTQ_SPI_TXFCON_TXFEN		BIT(0)	/* FIFO enable */
++
++#define LTQ_SPI_FSTAT_RXFFL_MASK	0x3f
++#define LTQ_SPI_FSTAT_RXFFL_SHIFT	0
++#define LTQ_SPI_FSTAT_TXFFL_MASK	0x3f
++#define LTQ_SPI_FSTAT_TXFFL_SHIFT	8
++
++#define LTQ_SPI_GPOCON_ISCSBN_SHIFT	8
++#define LTQ_SPI_GPOCON_INVOUTN_SHIFT	0
++
++#define LTQ_SPI_FGPO_SETOUTN_SHIFT	8
++#define LTQ_SPI_FGPO_CLROUTN_SHIFT	0
++
++#define LTQ_SPI_RXREQ_RXCNT_MASK	0xFFFF	/* Receive count value */
++#define LTQ_SPI_RXCNT_TODO_MASK		0xFFFF	/* Recevie to-do value */
++
++#define LTQ_SPI_IRNEN_F		BIT(3)	/* Frame end interrupt request */
++#define LTQ_SPI_IRNEN_E		BIT(2)	/* Error end interrupt request */
++#define LTQ_SPI_IRNEN_T		BIT(1)	/* Transmit end interrupt request */
++#define LTQ_SPI_IRNEN_R		BIT(0)	/* Receive end interrupt request */
++#define LTQ_SPI_IRNEN_ALL	0xF
++
++/* Hard-wired GPIOs used by SPI controller */
++#define LTQ_SPI_GPIO_DI 	16
++#define LTQ_SPI_GPIO_DO		17
++#define LTQ_SPI_GPIO_CLK	18
++
++struct ltq_spi {
++	struct spi_bitbang	bitbang;
++	struct completion	done;
++	spinlock_t		lock;
++
++	struct device		*dev;
++	void __iomem		*base;
++	struct clk		*fpiclk;
++	struct clk		*spiclk;
++
++	int			status;
++	int			irq[3];
++
++	const u8		*tx;
++	u8			*rx;
++	u32			tx_cnt;
++	u32			rx_cnt;
++	u32			len;
++	struct spi_transfer	*curr_transfer;
++
++	u32 (*get_tx) (struct ltq_spi *);
++
++	u16			txfs;
++	u16			rxfs;
++	unsigned		dma_support:1;
++	unsigned		cfg_mode:1;
++
++};
++
++struct ltq_spi_controller_state {
++	void (*cs_activate) (struct spi_device *);
++	void (*cs_deactivate) (struct spi_device *);
++};
++
++struct ltq_spi_irq_map {
++	char		*name;
++	irq_handler_t	handler;
++};
++
++struct ltq_spi_cs_gpio_map {
++	unsigned	gpio;
++	unsigned	mux;
++};
++
++static inline struct ltq_spi *ltq_spi_to_hw(struct spi_device *spi)
++{
++	return spi_master_get_devdata(spi->master);
++}
++
++static inline u32 ltq_spi_reg_read(struct ltq_spi *hw, u32 reg)
++{
++	return ioread32be(hw->base + reg);
++}
++
++static inline void ltq_spi_reg_write(struct ltq_spi *hw, u32 val, u32 reg)
++{
++	iowrite32be(val, hw->base + reg);
++}
++
++static inline void ltq_spi_reg_setbit(struct ltq_spi *hw, u32 bits, u32 reg)
++{
++	u32 val;
++
++	val = ltq_spi_reg_read(hw, reg);
++	val |= bits;
++	ltq_spi_reg_write(hw, val, reg);
++}
++
++static inline void ltq_spi_reg_clearbit(struct ltq_spi *hw, u32 bits, u32 reg)
++{
++	u32 val;
++
++	val = ltq_spi_reg_read(hw, reg);
++	val &= ~bits;
++	ltq_spi_reg_write(hw, val, reg);
++}
++
++static void ltq_spi_hw_enable(struct ltq_spi *hw)
++{
++	u32 clc;
++
++	/* Power-up mdule */
++        clk_enable(hw->spiclk);
++
++	/*
++	 * Set clock divider for run mode to 1 to
++	 * run at same frequency as FPI bus
++	 */
++	clc = (1 << LTQ_SPI_CLC_RMC_SHIFT);
++	ltq_spi_reg_write(hw, clc, LTQ_SPI_CLC);
++}
++
++static void ltq_spi_hw_disable(struct ltq_spi *hw)
++{
++	/* Set clock divider to 0 and set module disable bit */
++	ltq_spi_reg_write(hw, LTQ_SPI_CLC_DISS, LTQ_SPI_CLC);
++
++	/* Power-down mdule */
++        clk_disable(hw->spiclk);
++}
++
++static void ltq_spi_reset_fifos(struct ltq_spi *hw)
++{
++	u32 val;
++
++	/*
++	 * Enable and flush FIFOs. Set interrupt trigger level to
++	 * half of FIFO count implemented in hardware.
++	 */
++	if (hw->txfs > 1) {
++		val = hw->txfs << (LTQ_SPI_TXFCON_TXFITL_SHIFT - 1);
++		val |= LTQ_SPI_TXFCON_TXFEN | LTQ_SPI_TXFCON_TXFLU;
++		ltq_spi_reg_write(hw, val, LTQ_SPI_TXFCON);
++	}
++
++	if (hw->rxfs > 1) {
++		val = hw->rxfs << (LTQ_SPI_RXFCON_RXFITL_SHIFT - 1);
++		val |= LTQ_SPI_RXFCON_RXFEN | LTQ_SPI_RXFCON_RXFLU;
++		ltq_spi_reg_write(hw, val, LTQ_SPI_RXFCON);
++	}
++}
++
++static inline int ltq_spi_wait_ready(struct ltq_spi *hw)
++{
++	u32 stat;
++	unsigned long timeout;
++
++	timeout = jiffies + msecs_to_jiffies(200);
++
++	do {
++		stat = ltq_spi_reg_read(hw, LTQ_SPI_STAT);
++		if (!(stat & LTQ_SPI_STAT_BSY))
++			return 0;
++
++		cond_resched();
++	} while (!time_after_eq(jiffies, timeout));
++
++	dev_err(hw->dev, "SPI wait ready timed out\n");
++
++	return -ETIMEDOUT;
++}
++
++static void ltq_spi_config_mode_set(struct ltq_spi *hw)
++{
++	if (hw->cfg_mode)
++		return;
++
++	/*
++	 * Putting the SPI module in config mode is only safe if no
++	 * transfer is in progress as indicated by busy flag STATE.BSY.
++	 */
++	if (ltq_spi_wait_ready(hw)) {
++		ltq_spi_reset_fifos(hw);
++		hw->status = -ETIMEDOUT;
++	}
++	ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLREN, LTQ_SPI_WHBSTATE);
++
++	hw->cfg_mode = 1;
++}
++
++static void ltq_spi_run_mode_set(struct ltq_spi *hw)
++{
++	if (!hw->cfg_mode)
++		return;
++
++	ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_SETEN, LTQ_SPI_WHBSTATE);
++
++	hw->cfg_mode = 0;
++}
++
++static u32 ltq_spi_tx_word_u8(struct ltq_spi *hw)
++{
++	const u8 *tx = hw->tx;
++	u32 data = *tx++;
++
++	hw->tx_cnt++;
++	hw->tx++;
++
++	return data;
++}
++
++static u32 ltq_spi_tx_word_u16(struct ltq_spi *hw)
++{
++	const u16 *tx = (u16 *) hw->tx;
++	u32 data = *tx++;
++
++	hw->tx_cnt += 2;
++	hw->tx += 2;
++
++	return data;
++}
++
++static u32 ltq_spi_tx_word_u32(struct ltq_spi *hw)
++{
++	const u32 *tx = (u32 *) hw->tx;
++	u32 data = *tx++;
++
++	hw->tx_cnt += 4;
++	hw->tx += 4;
++
++	return data;
++}
++
++static void ltq_spi_bits_per_word_set(struct spi_device *spi)
++{
++	struct ltq_spi *hw = ltq_spi_to_hw(spi);
++	u32 bm;
++	u8 bits_per_word = spi->bits_per_word;
++
++	/*
++	 * Use either default value of SPI device or value
++	 * from current transfer.
++	 */
++	if (hw->curr_transfer && hw->curr_transfer->bits_per_word)
++		bits_per_word = hw->curr_transfer->bits_per_word;
++
++	if (bits_per_word <= 8)
++		hw->get_tx = ltq_spi_tx_word_u8;
++	else if (bits_per_word <= 16)
++		hw->get_tx = ltq_spi_tx_word_u16;
++	else if (bits_per_word <= 32)
++		hw->get_tx = ltq_spi_tx_word_u32;
++
++	/* CON.BM value = bits_per_word - 1 */
++	bm = (bits_per_word - 1) << LTQ_SPI_CON_BM_SHIFT;
++
++	ltq_spi_reg_clearbit(hw, LTQ_SPI_CON_BM_MASK <<
++			     LTQ_SPI_CON_BM_SHIFT, LTQ_SPI_CON);
++	ltq_spi_reg_setbit(hw, bm, LTQ_SPI_CON);
++}
++
++static void ltq_spi_speed_set(struct spi_device *spi)
++{
++	struct ltq_spi *hw = ltq_spi_to_hw(spi);
++	u32 br, max_speed_hz, spi_clk;
++	u32 speed_hz = spi->max_speed_hz;
++
++	/*
++	 * Use either default value of SPI device or value
++	 * from current transfer.
++	 */
++	if (hw->curr_transfer && hw->curr_transfer->speed_hz)
++		speed_hz = hw->curr_transfer->speed_hz;
++
++	/*
++	 * SPI module clock is derived from FPI bus clock dependent on
++	 * divider value in CLC.RMS which is always set to 1.
++	 */
++	spi_clk = clk_get_rate(hw->fpiclk);
++
++	/*
++	 * Maximum SPI clock frequency in master mode is half of
++	 * SPI module clock frequency. Maximum reload value of
++	 * baudrate generator BR is 2^16.
++	 */
++	max_speed_hz = spi_clk / 2;
++	if (speed_hz >= max_speed_hz)
++		br = 0;
++	else
++		br = (max_speed_hz / speed_hz) - 1;
++
++	if (br > 0xFFFF)
++		br = 0xFFFF;
++
++	ltq_spi_reg_write(hw, br, LTQ_SPI_BRT);
++}
++
++static void ltq_spi_clockmode_set(struct spi_device *spi)
++{
++	struct ltq_spi *hw = ltq_spi_to_hw(spi);
++	u32 con;
++
++	con = ltq_spi_reg_read(hw, LTQ_SPI_CON);
++
++	/*
++	 * SPI mode mapping in CON register:
++	 * Mode CPOL CPHA CON.PO CON.PH
++	 *  0    0    0      0      1
++	 *  1    0    1      0      0
++	 *  2    1    0      1      1
++	 *  3    1    1      1      0
++	 */
++	if (spi->mode & SPI_CPHA)
++		con &= ~LTQ_SPI_CON_PH;
++	else
++		con |= LTQ_SPI_CON_PH;
++
++	if (spi->mode & SPI_CPOL)
++		con |= LTQ_SPI_CON_PO;
++	else
++		con &= ~LTQ_SPI_CON_PO;
++
++	/* Set heading control */
++	if (spi->mode & SPI_LSB_FIRST)
++		con &= ~LTQ_SPI_CON_HB;
++	else
++		con |= LTQ_SPI_CON_HB;
++
++	ltq_spi_reg_write(hw, con, LTQ_SPI_CON);
++}
++
++static void ltq_spi_xmit_set(struct ltq_spi *hw, struct spi_transfer *t)
++{
++	u32 con;
++
++	con = ltq_spi_reg_read(hw, LTQ_SPI_CON);
++
++	if (t) {
++		if (t->tx_buf && t->rx_buf) {
++			con &= ~(LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF);
++		} else if (t->rx_buf) {
++			con &= ~LTQ_SPI_CON_RXOFF;
++			con |= LTQ_SPI_CON_TXOFF;
++		} else if (t->tx_buf) {
++			con &= ~LTQ_SPI_CON_TXOFF;
++			con |= LTQ_SPI_CON_RXOFF;
++		}
++	} else
++		con |= (LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF);
++
++	ltq_spi_reg_write(hw, con, LTQ_SPI_CON);
++}
++
++static void ltq_spi_gpio_cs_activate(struct spi_device *spi)
++{
++	struct ltq_spi_controller_data *cdata = spi->controller_data;
++	int val = spi->mode & SPI_CS_HIGH ? 1 : 0;
++
++	gpio_set_value(cdata->gpio, val);
++}
++
++static void ltq_spi_gpio_cs_deactivate(struct spi_device *spi)
++{
++	struct ltq_spi_controller_data *cdata = spi->controller_data;
++	int val = spi->mode & SPI_CS_HIGH ? 0 : 1;
++
++	gpio_set_value(cdata->gpio, val);
++}
++
++static void ltq_spi_internal_cs_activate(struct spi_device *spi)
++{
++	struct ltq_spi *hw = ltq_spi_to_hw(spi);
++	u32 fgpo;
++
++	fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_CLROUTN_SHIFT));
++	ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
++}
++
++static void ltq_spi_internal_cs_deactivate(struct spi_device *spi)
++{
++	struct ltq_spi *hw = ltq_spi_to_hw(spi);
++	u32 fgpo;
++
++	fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_SETOUTN_SHIFT));
++	ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
++}
++
++static void ltq_spi_chipselect(struct spi_device *spi, int cs)
++{
++	struct ltq_spi *hw = ltq_spi_to_hw(spi);
++	struct ltq_spi_controller_state *cstate = spi->controller_state;
++
++	switch (cs) {
++	case BITBANG_CS_ACTIVE:
++		ltq_spi_bits_per_word_set(spi);
++		ltq_spi_speed_set(spi);
++		ltq_spi_clockmode_set(spi);
++		ltq_spi_run_mode_set(hw);
++
++		cstate->cs_activate(spi);
++		break;
++
++	case BITBANG_CS_INACTIVE:
++		cstate->cs_deactivate(spi);
++
++		ltq_spi_config_mode_set(hw);
++
++		break;
++	}
++}
++
++static int ltq_spi_setup_transfer(struct spi_device *spi,
++				  struct spi_transfer *t)
++{
++	struct ltq_spi *hw = ltq_spi_to_hw(spi);
++	u8 bits_per_word = spi->bits_per_word;
++
++	hw->curr_transfer = t;
++
++	if (t && t->bits_per_word)
++		bits_per_word = t->bits_per_word;
++
++	if (bits_per_word > 32)
++		return -EINVAL;
++
++	ltq_spi_config_mode_set(hw);
++
++	return 0;
++}
++
++static const struct ltq_spi_cs_gpio_map ltq_spi_cs[] = {
++	{ 15, 2 },
++	{ 22, 2 },
++	{ 13, 1 },
++	{ 10, 1 },
++	{  9, 1 },
++	{ 11, 3 },
++};
++
++static int ltq_spi_setup(struct spi_device *spi)
++{
++	struct ltq_spi *hw = ltq_spi_to_hw(spi);
++	struct ltq_spi_controller_data *cdata = spi->controller_data;
++	struct ltq_spi_controller_state *cstate;
++	u32 gpocon, fgpo;
++	int ret;
++
++	/* Set default word length to 8 if not set */
++	if (!spi->bits_per_word)
++		spi->bits_per_word = 8;
++
++	if (spi->bits_per_word > 32)
++		return -EINVAL;
++
++	if (!spi->controller_state) {
++		cstate = kzalloc(sizeof(struct ltq_spi_controller_state),
++				 GFP_KERNEL);
++		if (!cstate)
++			return -ENOMEM;
++
++		spi->controller_state = cstate;
++	} else
++		return 0;
++
++	/*
++	 * Up to six GPIOs can be connected to the SPI module
++	 * via GPIO alternate function to control the chip select lines.
++	 * For more flexibility in board layout this driver can also control
++	 * the CS lines via GPIO API. If GPIOs should be used, board setup code
++	 * have to register the SPI device with struct ltq_spi_controller_data
++	 * attached.
++	 */
++	if (cdata && cdata->gpio) {
++		ret = gpio_request(cdata->gpio, "spi-cs");
++		if (ret)
++			return -EBUSY;
++
++		ret = spi->mode & SPI_CS_HIGH ? 0 : 1;
++		gpio_direction_output(cdata->gpio, ret);
++
++		cstate->cs_activate = ltq_spi_gpio_cs_activate;
++		cstate->cs_deactivate = ltq_spi_gpio_cs_deactivate;
++	} else {
++		ret = ltq_gpio_request(&spi->dev, ltq_spi_cs[spi->chip_select].gpio,
++				ltq_spi_cs[spi->chip_select].mux,
++				1, "spi-cs");
++		if (ret)
++			return -EBUSY;
++
++		gpocon = (1 << (spi->chip_select +
++				LTQ_SPI_GPOCON_ISCSBN_SHIFT));
++
++		if (spi->mode & SPI_CS_HIGH)
++			gpocon |= (1 << spi->chip_select);
++
++		fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_SETOUTN_SHIFT));
++
++		ltq_spi_reg_setbit(hw, gpocon, LTQ_SPI_GPOCON);
++		ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
++
++		cstate->cs_activate = ltq_spi_internal_cs_activate;
++		cstate->cs_deactivate = ltq_spi_internal_cs_deactivate;
++	}
++
++	return 0;
++}
++
++static void ltq_spi_cleanup(struct spi_device *spi)
++{
++	struct ltq_spi_controller_data *cdata = spi->controller_data;
++	struct ltq_spi_controller_state *cstate = spi->controller_state;
++	unsigned gpio;
++
++	if (cdata && cdata->gpio)
++		gpio = cdata->gpio;
++	else
++		gpio = ltq_spi_cs[spi->chip_select].gpio;
++
++	gpio_free(gpio);
++	kfree(cstate);
++}
++
++static void ltq_spi_txfifo_write(struct ltq_spi *hw)
++{
++	u32 fstat, data;
++	u16 fifo_space;
++
++	/* Determine how much FIFOs are free for TX data */
++	fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT);
++	fifo_space = hw->txfs - ((fstat >> LTQ_SPI_FSTAT_TXFFL_SHIFT) &
++					LTQ_SPI_FSTAT_TXFFL_MASK);
++
++	if (!fifo_space)
++		return;
++
++	while (hw->tx_cnt < hw->len && fifo_space) {
++		data = hw->get_tx(hw);
++		ltq_spi_reg_write(hw, data, LTQ_SPI_TB);
++		fifo_space--;
++	}
++}
++
++static void ltq_spi_rxfifo_read(struct ltq_spi *hw)
++{
++	u32 fstat, data, *rx32;
++	u16 fifo_fill;
++	u8 rxbv, shift, *rx8;
++
++	/* Determine how much FIFOs are filled with RX data */
++	fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT);
++	fifo_fill = ((fstat >> LTQ_SPI_FSTAT_RXFFL_SHIFT)
++			& LTQ_SPI_FSTAT_RXFFL_MASK);
++
++	if (!fifo_fill)
++		return;
++
++	/*
++	 * The 32 bit FIFO is always used completely independent from the
++	 * bits_per_word value. Thus four bytes have to be read at once
++	 * per FIFO.
++	 */
++	rx32 = (u32 *) hw->rx;
++	while (hw->len - hw->rx_cnt >= 4 && fifo_fill) {
++		*rx32++ = ltq_spi_reg_read(hw, LTQ_SPI_RB);
++		hw->rx_cnt += 4;
++		hw->rx += 4;
++		fifo_fill--;
++	}
++
++	/*
++	 * If there are remaining bytes, read byte count from STAT.RXBV
++	 * register and read the data byte-wise.
++	 */
++	while (fifo_fill && hw->rx_cnt < hw->len) {
++		rxbv = (ltq_spi_reg_read(hw, LTQ_SPI_STAT) >>
++			LTQ_SPI_STAT_RXBV_SHIFT) & LTQ_SPI_STAT_RXBV_MASK;
++		data = ltq_spi_reg_read(hw, LTQ_SPI_RB);
++
++		shift = (rxbv - 1) * 8;
++		rx8 = hw->rx;
++
++		while (rxbv) {
++			*rx8++ = (data >> shift) & 0xFF;
++			rxbv--;
++			shift -= 8;
++			hw->rx_cnt++;
++			hw->rx++;
++		}
++
++		fifo_fill--;
++	}
++}
++
++static void ltq_spi_rxreq_set(struct ltq_spi *hw)
++{
++	u32 rxreq, rxreq_max, rxtodo;
++
++	rxtodo = ltq_spi_reg_read(hw, LTQ_SPI_RXCNT) & LTQ_SPI_RXCNT_TODO_MASK;
++
++	/*
++	 * In RX-only mode the serial clock is activated only after writing
++	 * the expected amount of RX bytes into RXREQ register.
++	 * To avoid receive overflows at high clocks it is better to request
++	 * only the amount of bytes that fits into all FIFOs. This value
++	 * depends on the FIFO size implemented in hardware.
++	 */
++	rxreq = hw->len - hw->rx_cnt;
++	rxreq_max = hw->rxfs << 2;
++	rxreq = min(rxreq_max, rxreq);
++
++	if (!rxtodo && rxreq)
++		ltq_spi_reg_write(hw, rxreq, LTQ_SPI_RXREQ);
++}
++
++static inline void ltq_spi_complete(struct ltq_spi *hw)
++{
++	complete(&hw->done);
++}
++
++irqreturn_t ltq_spi_tx_irq(int irq, void *data)
++{
++	struct ltq_spi *hw = data;
++	unsigned long flags;
++	int completed = 0;
++
++	spin_lock_irqsave(&hw->lock, flags);
++
++	if (hw->tx_cnt < hw->len)
++		ltq_spi_txfifo_write(hw);
++
++	if (hw->tx_cnt == hw->len)
++		completed = 1;
++
++	spin_unlock_irqrestore(&hw->lock, flags);
++
++	if (completed)
++		ltq_spi_complete(hw);
++
++	return IRQ_HANDLED;
++}
++
++irqreturn_t ltq_spi_rx_irq(int irq, void *data)
++{
++	struct ltq_spi *hw = data;
++	unsigned long flags;
++	int completed = 0;
++
++	spin_lock_irqsave(&hw->lock, flags);
++
++	if (hw->rx_cnt < hw->len) {
++		ltq_spi_rxfifo_read(hw);
++
++		if (hw->tx && hw->tx_cnt < hw->len)
++			ltq_spi_txfifo_write(hw);
++	}
++
++	if (hw->rx_cnt == hw->len)
++		completed = 1;
++	else if (!hw->tx)
++		ltq_spi_rxreq_set(hw);
++
++	spin_unlock_irqrestore(&hw->lock, flags);
++
++	if (completed)
++		ltq_spi_complete(hw);
++
++	return IRQ_HANDLED;
++}
++
++irqreturn_t ltq_spi_err_irq(int irq, void *data)
++{
++	struct ltq_spi *hw = data;
++	unsigned long flags;
++
++	spin_lock_irqsave(&hw->lock, flags);
++
++	/* Disable all interrupts */
++	ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN);
++
++	/* Clear all error flags */
++	ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
++
++	/* Flush FIFOs */
++	ltq_spi_reg_setbit(hw, LTQ_SPI_RXFCON_RXFLU, LTQ_SPI_RXFCON);
++	ltq_spi_reg_setbit(hw, LTQ_SPI_TXFCON_TXFLU, LTQ_SPI_TXFCON);
++
++	hw->status = -EIO;
++	spin_unlock_irqrestore(&hw->lock, flags);
++
++	ltq_spi_complete(hw);
++
++	return IRQ_HANDLED;
++}
++
++static int ltq_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
++{
++	struct ltq_spi *hw = ltq_spi_to_hw(spi);
++	u32 irq_flags = 0;
++
++	hw->tx = t->tx_buf;
++	hw->rx = t->rx_buf;
++	hw->len = t->len;
++	hw->tx_cnt = 0;
++	hw->rx_cnt = 0;
++	hw->status = 0;
++	INIT_COMPLETION(hw->done);
++
++	ltq_spi_xmit_set(hw, t);
++
++	/* Enable error interrupts */
++	ltq_spi_reg_setbit(hw, LTQ_SPI_IRNEN_E, LTQ_SPI_IRNEN);
++
++	if (hw->tx) {
++		/* Initially fill TX FIFO with as much data as possible */
++		ltq_spi_txfifo_write(hw);
++		irq_flags |= LTQ_SPI_IRNEN_T;
++
++		/* Always enable RX interrupt in Full Duplex mode */
++		if (hw->rx)
++			irq_flags |= LTQ_SPI_IRNEN_R;
++	} else if (hw->rx) {
++		/* Start RX clock */
++		ltq_spi_rxreq_set(hw);
++
++		/* Enable RX interrupt to receive data from RX FIFOs */
++		irq_flags |= LTQ_SPI_IRNEN_R;
++	}
++
++	/* Enable TX or RX interrupts */
++	ltq_spi_reg_setbit(hw, irq_flags, LTQ_SPI_IRNEN);
++	wait_for_completion_interruptible(&hw->done);
++
++	/* Disable all interrupts */
++	ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN);
++
++	/*
++	 * Return length of current transfer for bitbang utility code if
++	 * no errors occured during transmission.
++	 */
++	if (!hw->status)
++		hw->status = hw->len;
++
++	return hw->status;
++}
++
++static const struct ltq_spi_irq_map ltq_spi_irqs[] = {
++	{ "spi_tx", ltq_spi_tx_irq },
++	{ "spi_rx", ltq_spi_rx_irq },
++	{ "spi_err", ltq_spi_err_irq },
++};
++
++static int __init ltq_spi_probe(struct platform_device *pdev)
++{
++	struct spi_master *master;
++	struct resource *r;
++	struct ltq_spi *hw;
++	struct ltq_spi_platform_data *pdata = pdev->dev.platform_data;
++	int ret, i;
++	u32 data, id;
++
++	master = spi_alloc_master(&pdev->dev, sizeof(struct ltq_spi));
++	if (!master) {
++		dev_err(&pdev->dev, "spi_alloc_master\n");
++		ret = -ENOMEM;
++		goto err;
++	}
++
++	hw = spi_master_get_devdata(master);
++
++	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (r == NULL) {
++		dev_err(&pdev->dev, "platform_get_resource\n");
++		ret = -ENOENT;
++		goto err_master;
++	}
++
++	r = devm_request_mem_region(&pdev->dev, r->start, resource_size(r),
++			pdev->name);
++	if (!r) {
++		dev_err(&pdev->dev, "devm_request_mem_region\n");
++		ret = -ENXIO;
++		goto err_master;
++	}
++
++	hw->base = devm_ioremap_nocache(&pdev->dev, r->start, resource_size(r));
++	if (!hw->base) {
++		dev_err(&pdev->dev, "devm_ioremap_nocache\n");
++		ret = -ENXIO;
++		goto err_master;
++	}
++
++	hw->fpiclk = clk_get_fpi();
++	if (IS_ERR(hw->fpiclk)) {
++		dev_err(&pdev->dev, "clk_get\n");
++		ret = PTR_ERR(hw->fpiclk);
++		goto err_master;
++	}
++
++	hw->spiclk = clk_get(&pdev->dev, NULL);
++	if (IS_ERR(hw->spiclk)) {
++		dev_err(&pdev->dev, "clk_get\n");
++		ret = PTR_ERR(hw->spiclk);
++		goto err_master;
++	}
++
++	memset(hw->irq, 0, sizeof(hw->irq));
++	for (i = 0; i < ARRAY_SIZE(ltq_spi_irqs); i++) {
++		ret = platform_get_irq_byname(pdev, ltq_spi_irqs[i].name);
++		if (0 > ret) {
++			dev_err(&pdev->dev, "platform_get_irq_byname\n");
++			goto err_irq;
++		}
++
++		hw->irq[i] = ret;
++		ret = request_irq(hw->irq[i], ltq_spi_irqs[i].handler,
++				  0, ltq_spi_irqs[i].name, hw);
++		if (ret) {
++			dev_err(&pdev->dev, "request_irq\n");
++			goto err_irq;
++		}
++	}
++
++	hw->bitbang.master = spi_master_get(master);
++	hw->bitbang.chipselect = ltq_spi_chipselect;
++	hw->bitbang.setup_transfer = ltq_spi_setup_transfer;
++	hw->bitbang.txrx_bufs = ltq_spi_txrx_bufs;
++
++	master->bus_num = pdev->id;
++	master->num_chipselect = pdata->num_chipselect;
++	master->setup = ltq_spi_setup;
++	master->cleanup = ltq_spi_cleanup;
++
++	hw->dev = &pdev->dev;
++	init_completion(&hw->done);
++	spin_lock_init(&hw->lock);
++
++	/* Set GPIO alternate functions to SPI */
++	ltq_gpio_request(&pdev->dev, LTQ_SPI_GPIO_DI, 2, 0, "spi-di");
++	ltq_gpio_request(&pdev->dev, LTQ_SPI_GPIO_DO, 2, 1, "spi-do");
++	ltq_gpio_request(&pdev->dev, LTQ_SPI_GPIO_CLK, 2, 1, "spi-clk");
++
++	ltq_spi_hw_enable(hw);
++
++	/* Read module capabilities */
++	id = ltq_spi_reg_read(hw, LTQ_SPI_ID);
++	hw->txfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK;
++	hw->rxfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK;
++	hw->dma_support = (id & LTQ_SPI_ID_CFG) ? 1 : 0;
++
++	ltq_spi_config_mode_set(hw);
++
++	/* Enable error checking, disable TX/RX, set idle value high */
++	data = LTQ_SPI_CON_RUEN | LTQ_SPI_CON_AEN |
++	    LTQ_SPI_CON_TEN | LTQ_SPI_CON_REN |
++	    LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF | LTQ_SPI_CON_IDLE;
++	ltq_spi_reg_write(hw, data, LTQ_SPI_CON);
++
++	/* Enable master mode and clear error flags */
++	ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_SETMS |
++			  LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
++
++	/* Reset GPIO/CS registers */
++	ltq_spi_reg_write(hw, 0x0, LTQ_SPI_GPOCON);
++	ltq_spi_reg_write(hw, 0xFF00, LTQ_SPI_FGPO);
++
++	/* Enable and flush FIFOs */
++	ltq_spi_reset_fifos(hw);
++
++	ret = spi_bitbang_start(&hw->bitbang);
++	if (ret) {
++		dev_err(&pdev->dev, "spi_bitbang_start\n");
++		goto err_bitbang;
++	}
++
++	platform_set_drvdata(pdev, hw);
++
++	pr_info("Lantiq SoC SPI controller rev %u (TXFS %u, RXFS %u, DMA %u)\n",
++		id & LTQ_SPI_ID_REV_MASK, hw->txfs, hw->rxfs, hw->dma_support);
++
++	return 0;
++
++err_bitbang:
++	ltq_spi_hw_disable(hw);
++
++err_irq:
++	clk_put(hw->fpiclk);
++
++	for (; i > 0; i--)
++		free_irq(hw->irq[i], hw);
++
++err_master:
++	spi_master_put(master);
++
++err:
++	return ret;
++}
++
++static int __exit ltq_spi_remove(struct platform_device *pdev)
++{
++	struct ltq_spi *hw = platform_get_drvdata(pdev);
++	int ret, i;
++
++	ret = spi_bitbang_stop(&hw->bitbang);
++	if (ret)
++		return ret;
++
++	platform_set_drvdata(pdev, NULL);
++
++	ltq_spi_config_mode_set(hw);
++	ltq_spi_hw_disable(hw);
++
++	for (i = 0; i < ARRAY_SIZE(hw->irq); i++)
++		if (0 < hw->irq[i])
++			free_irq(hw->irq[i], hw);
++
++	gpio_free(LTQ_SPI_GPIO_DI);
++	gpio_free(LTQ_SPI_GPIO_DO);
++	gpio_free(LTQ_SPI_GPIO_CLK);
++
++	clk_put(hw->fpiclk);
++	spi_master_put(hw->bitbang.master);
++
++	return 0;
++}
++
++static struct platform_driver ltq_spi_driver = {
++	.driver = {
++		   .name = "ltq_spi",
++		   .owner = THIS_MODULE,
++		   },
++	.remove = __exit_p(ltq_spi_remove),
++};
++
++static int __init ltq_spi_init(void)
++{
++	return platform_driver_probe(&ltq_spi_driver, ltq_spi_probe);
++}
++module_init(ltq_spi_init);
++
++static void __exit ltq_spi_exit(void)
++{
++	platform_driver_unregister(&ltq_spi_driver);
++}
++module_exit(ltq_spi_exit);
++
++MODULE_DESCRIPTION("Lantiq SoC SPI controller driver");
++MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:ltq-spi");
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0039-NET-adds-driver-for-lantiq-vr9-ethernet.patch b/target/linux/lantiq/patches-3.3/0039-NET-adds-driver-for-lantiq-vr9-ethernet.patch
new file mode 100644
index 0000000000..8505db12d6
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0039-NET-adds-driver-for-lantiq-vr9-ethernet.patch
@@ -0,0 +1,1470 @@
+From 239505c96aa66b4280b7726850235dcb707d2d91 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 9 Mar 2012 19:03:40 +0100
+Subject: [PATCH 39/70] NET: adds driver for lantiq vr9 ethernet
+
+---
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h |    2 +-
+ arch/mips/lantiq/xway/devices.c                    |   20 +
+ arch/mips/lantiq/xway/devices.h                    |    1 +
+ drivers/net/ethernet/Kconfig                       |    6 +
+ drivers/net/ethernet/Makefile                      |    1 +
+ drivers/net/ethernet/lantiq_vrx200.c               | 1358 ++++++++++++++++++++
+ 6 files changed, 1387 insertions(+), 1 deletions(-)
+ create mode 100644 drivers/net/ethernet/lantiq_vrx200.c
+
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index ab2d236..d1b8cc8 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -102,7 +102,7 @@
+ 
+ /* GBIT - gigabit switch */
+ #define LTQ_GBIT_BASE_ADDR	0x1E108000
+-#define LTQ_GBIT_SIZE		0x200
++#define LTQ_GBIT_SIZE		0x4000
+ 
+ /* DMA */
+ #define LTQ_DMA_BASE_ADDR	0x1E104100
+diff --git a/arch/mips/lantiq/xway/devices.c b/arch/mips/lantiq/xway/devices.c
+index eab4644d..5efa4f3 100644
+--- a/arch/mips/lantiq/xway/devices.c
++++ b/arch/mips/lantiq/xway/devices.c
+@@ -83,6 +83,7 @@ static struct platform_device ltq_etop = {
+ 	.name		= "ltq_etop",
+ 	.resource	= ltq_etop_resources,
+ 	.num_resources	= 1,
++	.id		= -1,
+ };
+ 
+ void __init
+@@ -96,3 +97,22 @@ ltq_register_etop(struct ltq_eth_data *eth)
+ 		platform_device_register(&ltq_etop);
+ 	}
+ }
++
++/* ethernet */
++static struct resource ltq_vrx200_resources[] = {
++	MEM_RES("gbit", LTQ_GBIT_BASE_ADDR, LTQ_GBIT_SIZE),
++};
++
++static struct platform_device ltq_vrx200 = {
++	.name		= "ltq_vrx200",
++	.resource	= ltq_vrx200_resources,
++	.num_resources	= 1,
++	.id = -1,
++};
++
++void __init
++ltq_register_vrx200(struct ltq_eth_data *eth)
++{
++	ltq_vrx200.dev.platform_data = eth;
++	platform_device_register(&ltq_vrx200);
++}
+diff --git a/arch/mips/lantiq/xway/devices.h b/arch/mips/lantiq/xway/devices.h
+index d825cbd..08befd9 100644
+--- a/arch/mips/lantiq/xway/devices.h
++++ b/arch/mips/lantiq/xway/devices.h
+@@ -17,5 +17,6 @@ extern void ltq_register_gpio_stp(void);
+ extern void ltq_register_ase_asc(void);
+ extern void ltq_register_etop(struct ltq_eth_data *eth);
+ extern void xway_register_nand(struct mtd_partition *parts, int count);
++extern void ltq_register_vrx200(struct ltq_eth_data *eth);
+ 
+ #endif
+diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
+index 3474a61..e1caa1b 100644
+--- a/drivers/net/ethernet/Kconfig
++++ b/drivers/net/ethernet/Kconfig
+@@ -85,6 +85,12 @@ config LANTIQ_ETOP
+ 	---help---
+ 	  Support for the MII0 inside the Lantiq SoC
+ 
++config LANTIQ_VRX200
++	tristate "Lantiq SoC vrx200 driver"
++	depends on SOC_TYPE_XWAY
++	---help---
++	  Support for the MII0 inside the Lantiq SoC
++
+ source "drivers/net/ethernet/marvell/Kconfig"
+ source "drivers/net/ethernet/mellanox/Kconfig"
+ source "drivers/net/ethernet/micrel/Kconfig"
+diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
+index 08d5f03..0c47dc5 100644
+--- a/drivers/net/ethernet/Makefile
++++ b/drivers/net/ethernet/Makefile
+@@ -36,6 +36,7 @@ obj-$(CONFIG_IP1000) += icplus/
+ obj-$(CONFIG_JME) += jme.o
+ obj-$(CONFIG_KORINA) += korina.o
+ obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
++obj-$(CONFIG_LANTIQ_VRX200) += lantiq_vrx200.o
+ obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
+ obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
+ obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
+diff --git a/drivers/net/ethernet/lantiq_vrx200.c b/drivers/net/ethernet/lantiq_vrx200.c
+new file mode 100644
+index 0000000..d79d380
+--- /dev/null
++++ b/drivers/net/ethernet/lantiq_vrx200.c
+@@ -0,0 +1,1358 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify it
++ *   under the terms of the GNU General Public License version 2 as published
++ *   by the Free Software Foundation.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2011 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/errno.h>
++#include <linux/types.h>
++#include <linux/interrupt.h>
++#include <linux/uaccess.h>
++#include <linux/in.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/phy.h>
++#include <linux/ip.h>
++#include <linux/tcp.h>
++#include <linux/skbuff.h>
++#include <linux/mm.h>
++#include <linux/platform_device.h>
++#include <linux/ethtool.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/io.h>
++#include <linux/dma-mapping.h>
++#include <linux/module.h>
++#include <linux/clk.h>
++
++#include <asm/checksum.h>
++
++#include <lantiq_soc.h>
++#include <xway_dma.h>
++#include <lantiq_platform.h>
++
++#define LTQ_SWITCH_BASE                 0x1E108000
++#define LTQ_SWITCH_CORE_BASE            LTQ_SWITCH_BASE
++#define LTQ_SWITCH_TOP_PDI_BASE         LTQ_SWITCH_CORE_BASE
++#define LTQ_SWITCH_BM_PDI_BASE          (LTQ_SWITCH_CORE_BASE + 4 * 0x40)
++#define LTQ_SWITCH_MAC_PDI_0_BASE       (LTQ_SWITCH_CORE_BASE + 4 * 0x900)
++#define LTQ_SWITCH_MAC_PDI_X_BASE(x)    (LTQ_SWITCH_MAC_PDI_0_BASE + x * 0x30)
++#define LTQ_SWITCH_TOPLEVEL_BASE        (LTQ_SWITCH_BASE + 4 * 0xC40)
++#define LTQ_SWITCH_MDIO_PDI_BASE        (LTQ_SWITCH_TOPLEVEL_BASE)
++#define LTQ_SWITCH_MII_PDI_BASE         (LTQ_SWITCH_TOPLEVEL_BASE + 4 * 0x36)
++#define LTQ_SWITCH_PMAC_PDI_BASE        (LTQ_SWITCH_TOPLEVEL_BASE + 4 * 0x82)
++
++#define LTQ_ETHSW_MAC_CTRL0_PADEN               (1 << 8)
++#define LTQ_ETHSW_MAC_CTRL0_FCS                 (1 << 7)
++#define LTQ_ETHSW_MAC_CTRL1_SHORTPRE            (1 << 8)
++#define LTQ_ETHSW_MAC_CTRL2_MLEN                (1 << 3)
++#define LTQ_ETHSW_MAC_CTRL2_LCHKL               (1 << 2)
++#define LTQ_ETHSW_MAC_CTRL2_LCHKS_DIS           0
++#define LTQ_ETHSW_MAC_CTRL2_LCHKS_UNTAG         1
++#define LTQ_ETHSW_MAC_CTRL2_LCHKS_TAG           2
++#define LTQ_ETHSW_MAC_CTRL6_RBUF_DLY_WP_SHIFT   9
++#define LTQ_ETHSW_MAC_CTRL6_RXBUF_BYPASS        (1 << 6)
++#define LTQ_ETHSW_GLOB_CTRL_SE                  (1 << 15)
++#define LTQ_ETHSW_MDC_CFG1_MCEN                 (1 << 8)
++#define LTQ_ETHSW_PMAC_HD_CTL_FC                (1 << 10)
++#define LTQ_ETHSW_PMAC_HD_CTL_RC                (1 << 4)
++#define LTQ_ETHSW_PMAC_HD_CTL_AC                (1 << 2)
++#define ADVERTIZE_MPD          (1 << 10)
++
++#define MDIO_DEVAD_NONE                    (-1)
++
++#define LTQ_ETH_RX_BUFFER_CNT           PKTBUFSRX
++
++#define LTQ_MDIO_DRV_NAME               "ltq-mdio"
++#define LTQ_ETH_DRV_NAME                "ltq-eth"
++
++#define LTQ_ETHSW_MAX_GMAC              1
++#define LTQ_ETHSW_PMAC                  1
++
++#define ltq_setbits(a, set) \
++        ltq_w32(ltq_r32(a) | (set), a)
++
++enum ltq_reset_modules {
++	LTQ_RESET_CORE,
++	LTQ_RESET_DMA,
++	LTQ_RESET_ETH,
++	LTQ_RESET_PHY,
++	LTQ_RESET_HARD,
++	LTQ_RESET_SOFT,
++};
++
++static inline void
++dbg_ltq_writel(void *a, unsigned int b)
++{
++	ltq_w32(b, a);
++}
++
++int ltq_reset_once(enum ltq_reset_modules module, ulong usec);
++
++struct ltq_ethsw_mac_pdi_x_regs {
++	u32     pstat;          /* Port status */
++	u32     pisr;           /* Interrupt status */
++	u32     pier;           /* Interrupt enable */
++	u32     ctrl_0;         /* Control 0 */
++	u32     ctrl_1;         /* Control 1 */
++	u32     ctrl_2;         /* Control 2 */
++	u32     ctrl_3;         /* Control 3 */
++	u32     ctrl_4;         /* Control 4 */
++	u32     ctrl_5;         /* Control 5 */
++	u32     ctrl_6;         /* Control 6 */
++	u32     bufst;          /* TX/RX buffer control */
++	u32     testen;         /* Test enable */
++};
++
++struct ltq_ethsw_mac_pdi_regs {
++	struct ltq_ethsw_mac_pdi_x_regs mac[12];
++};
++
++struct ltq_ethsw_mdio_pdi_regs {
++	u32     glob_ctrl;      /* Global control 0 */
++	u32     rsvd0[7];
++	u32     mdio_ctrl;      /* MDIO control */
++	u32     mdio_read;      /* MDIO read data */
++	u32     mdio_write;     /* MDIO write data */
++	u32     mdc_cfg_0;      /* MDC clock configuration 0 */
++	u32     mdc_cfg_1;      /* MDC clock configuration 1 */
++	u32     rsvd[3];
++	u32     phy_addr_5;     /* PHY address port 5 */
++	u32     phy_addr_4;     /* PHY address port 4 */
++	u32     phy_addr_3;     /* PHY address port 3 */
++	u32     phy_addr_2;     /* PHY address port 2 */
++	u32     phy_addr_1;     /* PHY address port 1 */
++	u32     phy_addr_0;     /* PHY address port 0 */
++	u32     mdio_stat_0;    /* MDIO PHY polling status port 0 */
++	u32     mdio_stat_1;    /* MDIO PHY polling status port 1 */
++	u32     mdio_stat_2;    /* MDIO PHY polling status port 2 */
++	u32     mdio_stat_3;    /* MDIO PHY polling status port 3 */
++	u32     mdio_stat_4;    /* MDIO PHY polling status port 4 */
++	u32     mdio_stat_5;    /* MDIO PHY polling status port 5 */
++};
++
++struct ltq_ethsw_mii_pdi_regs {
++	u32     mii_cfg0;       /* xMII port 0 configuration */
++	u32     pcdu0;          /* Port 0 clock delay configuration */
++	u32     mii_cfg1;       /* xMII port 1 configuration */
++	u32     pcdu1;          /* Port 1 clock delay configuration */
++	u32     mii_cfg2;       /* xMII port 2 configuration */
++	u32     rsvd0;
++	u32     mii_cfg3;       /* xMII port 3 configuration */
++	u32     rsvd1;
++	u32     mii_cfg4;       /* xMII port 4 configuration */
++	u32     rsvd2;
++	u32     mii_cfg5;       /* xMII port 5 configuration */
++	u32     pcdu5;          /* Port 5 clock delay configuration */
++};
++
++struct ltq_ethsw_pmac_pdi_regs {
++	u32     hd_ctl;         /* PMAC header control */
++	u32     tl;             /* PMAC type/length */
++	u32     sa1;            /* PMAC source address 1 */
++	u32     sa2;            /* PMAC source address 2 */
++	u32     sa3;            /* PMAC source address 3 */
++	u32     da1;            /* PMAC destination address 1 */
++	u32     da2;            /* PMAC destination address 2 */
++	u32     da3;            /* PMAC destination address 3 */
++	u32     vlan;           /* PMAC VLAN */
++	u32     rx_ipg;         /* PMAC interpacket gap in RX direction */
++	u32     st_etype;       /* PMAC special tag ethertype */
++	u32     ewan;           /* PMAC ethernet WAN group */
++};
++
++struct ltq_mdio_phy_addr_reg {
++	union {
++		struct {
++			unsigned rsvd:1;
++			unsigned lnkst:2;       /* Link status control */
++			unsigned speed:2;       /* Speed control */
++			unsigned fdup:2;        /* Full duplex control */
++			unsigned fcontx:2;      /* Flow control mode TX */
++			unsigned fconrx:2;      /* Flow control mode RX */
++			unsigned addr:5;        /* PHY address */
++		} bits;
++		u16 val;
++	};
++};
++
++enum ltq_mdio_phy_addr_lnkst {
++	LTQ_MDIO_PHY_ADDR_LNKST_AUTO = 0,
++	LTQ_MDIO_PHY_ADDR_LNKST_UP = 1,
++	LTQ_MDIO_PHY_ADDR_LNKST_DOWN = 2,
++};
++
++enum ltq_mdio_phy_addr_speed {
++	LTQ_MDIO_PHY_ADDR_SPEED_M10 = 0,
++	LTQ_MDIO_PHY_ADDR_SPEED_M100 = 1,
++	LTQ_MDIO_PHY_ADDR_SPEED_G1 = 2,
++	LTQ_MDIO_PHY_ADDR_SPEED_AUTO = 3,
++};
++
++enum ltq_mdio_phy_addr_fdup {
++	LTQ_MDIO_PHY_ADDR_FDUP_AUTO = 0,
++	LTQ_MDIO_PHY_ADDR_FDUP_ENABLE = 1,
++	LTQ_MDIO_PHY_ADDR_FDUP_DISABLE = 3,
++};
++
++enum ltq_mdio_phy_addr_fcon {
++	LTQ_MDIO_PHY_ADDR_FCON_AUTO = 0,
++	LTQ_MDIO_PHY_ADDR_FCON_ENABLE = 1,
++	LTQ_MDIO_PHY_ADDR_FCON_DISABLE = 3,
++};
++
++struct ltq_mii_mii_cfg_reg {
++	union {
++		struct {
++			unsigned res:1;         /* Hardware reset */
++			unsigned en:1;          /* xMII interface enable */
++			unsigned isol:1;        /* xMII interface isolate */
++			unsigned ldclkdis:1;    /* Link down clock disable */
++			unsigned rsvd:1;
++			unsigned crs:2;         /* CRS sensitivity config */
++			unsigned rgmii_ibs:1;   /* RGMII In Band status */
++			unsigned rmii:1;        /* RMII ref clock direction */
++			unsigned miirate:3;     /* xMII interface clock rate */
++			unsigned miimode:4;     /* xMII interface mode */
++		} bits;
++		u16 val;
++	};
++};
++
++enum ltq_mii_mii_cfg_miirate {
++	LTQ_MII_MII_CFG_MIIRATE_M2P5 = 0,
++	LTQ_MII_MII_CFG_MIIRATE_M25 = 1,
++	LTQ_MII_MII_CFG_MIIRATE_M125 = 2,
++	LTQ_MII_MII_CFG_MIIRATE_M50 = 3,
++	LTQ_MII_MII_CFG_MIIRATE_AUTO = 4,
++};
++
++enum ltq_mii_mii_cfg_miimode {
++	LTQ_MII_MII_CFG_MIIMODE_MIIP = 0,
++	LTQ_MII_MII_CFG_MIIMODE_MIIM = 1,
++	LTQ_MII_MII_CFG_MIIMODE_RMIIP = 2,
++	LTQ_MII_MII_CFG_MIIMODE_RMIIM = 3,
++	LTQ_MII_MII_CFG_MIIMODE_RGMII = 4,
++};
++
++struct ltq_eth_priv {
++	struct ltq_dma_device *dma_dev;
++	struct mii_dev *bus;
++	struct eth_device *dev;
++	struct phy_device *phymap[LTQ_ETHSW_MAX_GMAC];
++	int rx_num;
++};
++
++enum ltq_mdio_mbusy {
++	LTQ_MDIO_MBUSY_IDLE = 0,
++	LTQ_MDIO_MBUSY_BUSY = 1,
++};
++
++enum ltq_mdio_op {
++	LTQ_MDIO_OP_WRITE = 1,
++	LTQ_MDIO_OP_READ = 2,
++};
++
++struct ltq_mdio_access {
++	union {
++		struct {
++			unsigned rsvd:3;
++			unsigned mbusy:1;
++			unsigned op:2;
++			unsigned phyad:5;
++			unsigned regad:5;
++		} bits;
++		u16 val;
++	};
++};
++
++enum LTQ_ETH_PORT_FLAGS {
++	LTQ_ETH_PORT_NONE       = 0,
++	LTQ_ETH_PORT_PHY        = 1,
++	LTQ_ETH_PORT_SWITCH     = (1 << 1),
++	LTQ_ETH_PORT_MAC        = (1 << 2),
++};
++
++struct ltq_eth_port_config {
++	u8 num;
++	u8 phy_addr;
++	u16 flags;
++	phy_interface_t phy_if;
++};
++
++struct ltq_eth_board_config {
++	const struct ltq_eth_port_config *ports;
++	int num_ports;
++};
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++	/* GMAC0: external Lantiq PEF7071 10/100/1000 PHY for LAN port 0 */
++	{ 0, 0x0, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
++	/* GMAC1: external Lantiq PEF7071 10/100/1000 PHY for LAN port 1 */
++	{ 1, 0x1, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
++};
++
++static const struct ltq_eth_board_config board_config = {
++	.ports = eth_port_config,
++	.num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++static struct ltq_ethsw_mac_pdi_regs *ltq_ethsw_mac_pdi_regs =
++	(struct ltq_ethsw_mac_pdi_regs *) CKSEG1ADDR(LTQ_SWITCH_MAC_PDI_0_BASE);
++
++static struct ltq_ethsw_mdio_pdi_regs *ltq_ethsw_mdio_pdi_regs =
++	(struct ltq_ethsw_mdio_pdi_regs *) CKSEG1ADDR(LTQ_SWITCH_MDIO_PDI_BASE);
++
++static struct ltq_ethsw_mii_pdi_regs *ltq_ethsw_mii_pdi_regs =
++	(struct ltq_ethsw_mii_pdi_regs *) CKSEG1ADDR(LTQ_SWITCH_MII_PDI_BASE);
++
++static struct ltq_ethsw_pmac_pdi_regs *ltq_ethsw_pmac_pdi_regs =
++	(struct ltq_ethsw_pmac_pdi_regs *) CKSEG1ADDR(LTQ_SWITCH_PMAC_PDI_BASE);
++
++
++#define MAX_DMA_CHAN		0x8
++#define MAX_DMA_CRC_LEN		0x4
++#define MAX_DMA_DATA_LEN	0x600
++
++/* use 2 static channels for TX/RX
++   depending on the SoC we need to use different DMA channels for ethernet */
++#define LTQ_ETOP_TX_CHANNEL	1
++#define LTQ_ETOP_RX_CHANNEL	0
++
++#define IS_TX(x)		(x == LTQ_ETOP_TX_CHANNEL)
++#define IS_RX(x)		(x == LTQ_ETOP_RX_CHANNEL)
++
++#define DRV_VERSION	"1.0"
++
++static void __iomem *ltq_vrx200_membase;
++
++struct ltq_vrx200_chan {
++	int idx;
++	int tx_free;
++	struct net_device *netdev;
++	struct napi_struct napi;
++	struct ltq_dma_channel dma;
++	struct sk_buff *skb[LTQ_DESC_NUM];
++};
++
++struct ltq_vrx200_priv {
++	struct net_device *netdev;
++	struct ltq_eth_data *pldata;
++	struct resource *res;
++
++	struct mii_bus *mii_bus;
++	struct phy_device *phydev;
++
++	struct ltq_vrx200_chan ch[MAX_DMA_CHAN];
++	int tx_free[MAX_DMA_CHAN >> 1];
++
++	spinlock_t lock;
++
++	struct clk *clk_ppe;
++};
++
++static int ltq_vrx200_mdio_wr(struct mii_bus *bus, int phy_addr,
++				int phy_reg, u16 phy_data);
++
++static int
++ltq_vrx200_alloc_skb(struct ltq_vrx200_chan *ch)
++{
++	ch->skb[ch->dma.desc] = dev_alloc_skb(MAX_DMA_DATA_LEN);
++	if (!ch->skb[ch->dma.desc])
++		return -ENOMEM;
++	ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
++		ch->skb[ch->dma.desc]->data, MAX_DMA_DATA_LEN,
++		DMA_FROM_DEVICE);
++	ch->dma.desc_base[ch->dma.desc].addr =
++		CPHYSADDR(ch->skb[ch->dma.desc]->data);
++	ch->dma.desc_base[ch->dma.desc].ctl =
++		LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
++		MAX_DMA_DATA_LEN;
++	skb_reserve(ch->skb[ch->dma.desc], NET_IP_ALIGN);
++	return 0;
++}
++
++static void
++ltq_vrx200_hw_receive(struct ltq_vrx200_chan *ch)
++{
++	struct ltq_vrx200_priv *priv = netdev_priv(ch->netdev);
++	struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
++	struct sk_buff *skb = ch->skb[ch->dma.desc];
++	int len = (desc->ctl & LTQ_DMA_SIZE_MASK) - MAX_DMA_CRC_LEN;
++	unsigned long flags;
++
++	spin_lock_irqsave(&priv->lock, flags);
++	if (ltq_vrx200_alloc_skb(ch)) {
++		netdev_err(ch->netdev,
++			"failed to allocate new rx buffer, stopping DMA\n");
++		ltq_dma_close(&ch->dma);
++	}
++	ch->dma.desc++;
++	ch->dma.desc %= LTQ_DESC_NUM;
++	spin_unlock_irqrestore(&priv->lock, flags);
++
++	skb_put(skb, len);
++	skb->dev = ch->netdev;
++	skb->protocol = eth_type_trans(skb, ch->netdev);
++	netif_receive_skb(skb);
++}
++
++static int
++ltq_vrx200_poll_rx(struct napi_struct *napi, int budget)
++{
++	struct ltq_vrx200_chan *ch = container_of(napi,
++				struct ltq_vrx200_chan, napi);
++	struct ltq_vrx200_priv *priv = netdev_priv(ch->netdev);
++	int rx = 0;
++	int complete = 0;
++	unsigned long flags;
++
++	while ((rx < budget) && !complete) {
++		struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
++
++		if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
++			ltq_vrx200_hw_receive(ch);
++			rx++;
++		} else {
++			complete = 1;
++		}
++	}
++	if (complete || !rx) {
++		napi_complete(&ch->napi);
++		spin_lock_irqsave(&priv->lock, flags);
++		ltq_dma_ack_irq(&ch->dma);
++		spin_unlock_irqrestore(&priv->lock, flags);
++	}
++	return rx;
++}
++
++static int
++ltq_vrx200_poll_tx(struct napi_struct *napi, int budget)
++{
++	struct ltq_vrx200_chan *ch =
++		container_of(napi, struct ltq_vrx200_chan, napi);
++	struct ltq_vrx200_priv *priv = netdev_priv(ch->netdev);
++	struct netdev_queue *txq =
++		netdev_get_tx_queue(ch->netdev, ch->idx >> 1);
++	unsigned long flags;
++
++	spin_lock_irqsave(&priv->lock, flags);
++	while ((ch->dma.desc_base[ch->tx_free].ctl &
++			(LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
++		dev_kfree_skb_any(ch->skb[ch->tx_free]);
++		ch->skb[ch->tx_free] = NULL;
++		memset(&ch->dma.desc_base[ch->tx_free], 0,
++			sizeof(struct ltq_dma_desc));
++		ch->tx_free++;
++		ch->tx_free %= LTQ_DESC_NUM;
++	}
++	spin_unlock_irqrestore(&priv->lock, flags);
++
++	if (netif_tx_queue_stopped(txq))
++		netif_tx_start_queue(txq);
++	napi_complete(&ch->napi);
++	spin_lock_irqsave(&priv->lock, flags);
++	ltq_dma_ack_irq(&ch->dma);
++	spin_unlock_irqrestore(&priv->lock, flags);
++	return 1;
++}
++
++static irqreturn_t
++ltq_vrx200_dma_irq(int irq, void *_priv)
++{
++	struct ltq_vrx200_priv *priv = _priv;
++	int ch = irq - LTQ_DMA_ETOP;
++
++	napi_schedule(&priv->ch[ch].napi);
++	return IRQ_HANDLED;
++}
++
++static void
++ltq_vrx200_free_channel(struct net_device *dev, struct ltq_vrx200_chan *ch)
++{
++	struct ltq_vrx200_priv *priv = netdev_priv(dev);
++
++	ltq_dma_free(&ch->dma);
++	if (ch->dma.irq)
++		free_irq(ch->dma.irq, priv);
++	if (IS_RX(ch->idx)) {
++		int desc;
++		for (desc = 0; desc < LTQ_DESC_NUM; desc++)
++			dev_kfree_skb_any(ch->skb[ch->dma.desc]);
++	}
++}
++
++static void
++ltq_vrx200_hw_exit(struct net_device *dev)
++{
++	struct ltq_vrx200_priv *priv = netdev_priv(dev);
++	int i;
++
++	clk_disable(priv->clk_ppe);
++
++	for (i = 0; i < MAX_DMA_CHAN; i++)
++		if (IS_TX(i) || IS_RX(i))
++			ltq_vrx200_free_channel(dev, &priv->ch[i]);
++}
++
++static void *ltq_eth_phy_addr_reg(int num)
++{
++	switch (num) {
++	case 0:
++		return &ltq_ethsw_mdio_pdi_regs->phy_addr_0;
++	case 1:
++		return &ltq_ethsw_mdio_pdi_regs->phy_addr_1;
++	case 2:
++		return &ltq_ethsw_mdio_pdi_regs->phy_addr_2;
++	case 3:
++		return &ltq_ethsw_mdio_pdi_regs->phy_addr_3;
++	case 4:
++		return &ltq_ethsw_mdio_pdi_regs->phy_addr_4;
++	case 5:
++		return &ltq_ethsw_mdio_pdi_regs->phy_addr_5;
++	}
++
++	return NULL;
++}
++
++static void *ltq_eth_mii_cfg_reg(int num)
++{
++	switch (num) {
++	case 0:
++		return &ltq_ethsw_mii_pdi_regs->mii_cfg0;
++	case 1:
++		return &ltq_ethsw_mii_pdi_regs->mii_cfg1;
++	case 2:
++		return &ltq_ethsw_mii_pdi_regs->mii_cfg2;
++	case 3:
++		return &ltq_ethsw_mii_pdi_regs->mii_cfg3;
++	case 4:
++		return &ltq_ethsw_mii_pdi_regs->mii_cfg4;
++	case 5:
++		return &ltq_ethsw_mii_pdi_regs->mii_cfg5;
++	}
++
++	return NULL;
++}
++
++static void ltq_eth_gmac_update(struct phy_device *phydev, int num)
++{
++	struct ltq_mdio_phy_addr_reg phy_addr_reg;
++	struct ltq_mii_mii_cfg_reg mii_cfg_reg;
++	void *phy_addr = ltq_eth_phy_addr_reg(num);
++	void *mii_cfg = ltq_eth_mii_cfg_reg(num);
++
++	phy_addr_reg.val = ltq_r32(phy_addr);
++	mii_cfg_reg.val = ltq_r32(mii_cfg);
++
++	phy_addr_reg.bits.addr = phydev->addr;
++
++	if (phydev->link)
++		phy_addr_reg.bits.lnkst = LTQ_MDIO_PHY_ADDR_LNKST_UP;
++	else
++		phy_addr_reg.bits.lnkst = LTQ_MDIO_PHY_ADDR_LNKST_DOWN;
++
++	switch (phydev->speed) {
++	case SPEED_1000:
++		phy_addr_reg.bits.speed = LTQ_MDIO_PHY_ADDR_SPEED_G1;
++		mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M125;
++		break;
++	case SPEED_100:
++		phy_addr_reg.bits.speed = LTQ_MDIO_PHY_ADDR_SPEED_M100;
++		switch (mii_cfg_reg.bits.miimode) {
++		case LTQ_MII_MII_CFG_MIIMODE_RMIIM:
++		case LTQ_MII_MII_CFG_MIIMODE_RMIIP:
++			mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M50;
++			break;
++		default:
++			mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M25;
++			break;
++		}
++		break;
++	default:
++		phy_addr_reg.bits.speed = LTQ_MDIO_PHY_ADDR_SPEED_M10;
++		mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M2P5;
++		break;
++	}
++
++	if (phydev->duplex == DUPLEX_FULL)
++		phy_addr_reg.bits.fdup = LTQ_MDIO_PHY_ADDR_FDUP_ENABLE;
++	else
++		phy_addr_reg.bits.fdup = LTQ_MDIO_PHY_ADDR_FDUP_DISABLE;
++
++	dbg_ltq_writel(phy_addr, phy_addr_reg.val);
++	dbg_ltq_writel(mii_cfg, mii_cfg_reg.val);
++	udelay(1);
++}
++
++
++static void ltq_eth_port_config(struct ltq_vrx200_priv *priv,
++	const struct ltq_eth_port_config *port)
++{
++	struct ltq_mii_mii_cfg_reg mii_cfg_reg;
++	void *mii_cfg = ltq_eth_mii_cfg_reg(port->num);
++	int setup_gpio = 0;
++
++	mii_cfg_reg.val = ltq_r32(mii_cfg);
++
++
++	switch (port->num) {
++	case 0: /* xMII0 */
++	case 1: /* xMII1 */
++		switch (port->phy_if) {
++		case PHY_INTERFACE_MODE_MII:
++			if (port->flags & LTQ_ETH_PORT_PHY)
++				/* MII MAC mode, connected to external PHY */
++				mii_cfg_reg.bits.miimode =
++					LTQ_MII_MII_CFG_MIIMODE_MIIM;
++			else
++				/* MII PHY mode, connected to external MAC */
++				mii_cfg_reg.bits.miimode =
++					LTQ_MII_MII_CFG_MIIMODE_MIIP;
++				setup_gpio = 1;
++			break;
++		case PHY_INTERFACE_MODE_RMII:
++			if (port->flags & LTQ_ETH_PORT_PHY)
++				/* RMII MAC mode, connected to external PHY */
++				mii_cfg_reg.bits.miimode =
++					LTQ_MII_MII_CFG_MIIMODE_RMIIM;
++			else
++				/* RMII PHY mode, connected to external MAC */
++				mii_cfg_reg.bits.miimode =
++					LTQ_MII_MII_CFG_MIIMODE_RMIIP;
++				setup_gpio = 1;
++				break;
++		case PHY_INTERFACE_MODE_RGMII:
++			/* RGMII MAC mode, connected to external PHY */
++			mii_cfg_reg.bits.miimode =
++				LTQ_MII_MII_CFG_MIIMODE_RGMII;
++			setup_gpio = 1;
++			break;
++		default:
++			break;
++		}
++		break;
++	case 2: /* internal GPHY0 */
++	case 3: /* internal GPHY0 */
++	case 4: /* internal GPHY1 */
++		switch (port->phy_if) {
++			case PHY_INTERFACE_MODE_MII:
++			case PHY_INTERFACE_MODE_GMII:
++				/* MII MAC mode, connected to internal GPHY */
++				mii_cfg_reg.bits.miimode =
++					LTQ_MII_MII_CFG_MIIMODE_MIIM;
++				setup_gpio = 1;
++				break;
++			default:
++				break;
++		}
++		break;
++	case 5: /* internal GPHY1 or xMII2 */
++		switch (port->phy_if) {
++		case PHY_INTERFACE_MODE_MII:
++			/* MII MAC mode, connected to internal GPHY */
++			mii_cfg_reg.bits.miimode =
++				LTQ_MII_MII_CFG_MIIMODE_MIIM;
++			setup_gpio = 1;
++			break;
++		case PHY_INTERFACE_MODE_RGMII:
++			/* RGMII MAC mode, connected to external PHY */
++			mii_cfg_reg.bits.miimode =
++				LTQ_MII_MII_CFG_MIIMODE_RGMII;
++			setup_gpio = 1;
++			break;
++		default:
++			break;
++		}
++		break;
++	default:
++		break;
++	}
++
++	/* Enable MII interface */
++	mii_cfg_reg.bits.en = port->flags ? 1 : 0;
++	dbg_ltq_writel(mii_cfg, mii_cfg_reg.val);
++
++}
++
++static void ltq_eth_gmac_init(int num)
++{
++	struct ltq_mdio_phy_addr_reg phy_addr_reg;
++	struct ltq_mii_mii_cfg_reg mii_cfg_reg;
++	void *phy_addr = ltq_eth_phy_addr_reg(num);
++	void *mii_cfg = ltq_eth_mii_cfg_reg(num);
++	struct ltq_ethsw_mac_pdi_x_regs *mac_pdi_regs;
++
++	mac_pdi_regs = &ltq_ethsw_mac_pdi_regs->mac[num];
++
++	/* Reset PHY status to link down */
++	phy_addr_reg.val = ltq_r32(phy_addr);
++	phy_addr_reg.bits.addr = num;
++	phy_addr_reg.bits.lnkst = LTQ_MDIO_PHY_ADDR_LNKST_DOWN;
++	phy_addr_reg.bits.speed = LTQ_MDIO_PHY_ADDR_SPEED_M10;
++	phy_addr_reg.bits.fdup = LTQ_MDIO_PHY_ADDR_FDUP_DISABLE;
++	dbg_ltq_writel(phy_addr, phy_addr_reg.val);
++
++	/* Reset and disable MII interface */
++	mii_cfg_reg.val = ltq_r32(mii_cfg);
++	mii_cfg_reg.bits.en = 0;
++	mii_cfg_reg.bits.res = 1;
++	mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M2P5;
++	dbg_ltq_writel(mii_cfg, mii_cfg_reg.val);
++
++	/*
++	* Enable padding of short frames, enable frame checksum generation
++	* in transmit direction
++	*/
++	dbg_ltq_writel(&mac_pdi_regs->ctrl_0, LTQ_ETHSW_MAC_CTRL0_PADEN |
++		LTQ_ETHSW_MAC_CTRL0_FCS);
++
++	/* Set inter packet gap size to 12 bytes */
++	dbg_ltq_writel(&mac_pdi_regs->ctrl_1, 12);
++
++	/*
++	* Configure frame length checks:
++	* - allow jumbo frames
++	* - enable long length check
++	* - enable short length without VLAN tags
++	*/
++	dbg_ltq_writel(&mac_pdi_regs->ctrl_2, LTQ_ETHSW_MAC_CTRL2_MLEN |
++		LTQ_ETHSW_MAC_CTRL2_LCHKL |
++		LTQ_ETHSW_MAC_CTRL2_LCHKS_UNTAG);
++}
++
++
++static void ltq_eth_pmac_init(void)
++{
++	struct ltq_ethsw_mac_pdi_x_regs *mac_pdi_regs;
++
++	mac_pdi_regs = &ltq_ethsw_mac_pdi_regs->mac[LTQ_ETHSW_PMAC];
++
++	/*
++	* Enable padding of short frames, enable frame checksum generation
++	* in transmit direction
++	*/
++	dbg_ltq_writel(&mac_pdi_regs->ctrl_0, LTQ_ETHSW_MAC_CTRL0_PADEN |
++		LTQ_ETHSW_MAC_CTRL0_FCS);
++
++	/*
++	* Configure frame length checks:
++	* - allow jumbo frames
++	* - enable long length check
++	* - enable short length without VLAN tags
++	*/
++	dbg_ltq_writel(&mac_pdi_regs->ctrl_2, LTQ_ETHSW_MAC_CTRL2_MLEN |
++		LTQ_ETHSW_MAC_CTRL2_LCHKL |
++		LTQ_ETHSW_MAC_CTRL2_LCHKS_UNTAG);
++
++	/*
++	* Apply workaround for buffer congestion:
++	* - shorten preambel to 1 byte
++	* - set minimum inter packet gap size to 7 bytes
++	* - enable receive buffer bypass mode
++	*/
++	dbg_ltq_writel(&mac_pdi_regs->ctrl_1, LTQ_ETHSW_MAC_CTRL1_SHORTPRE | 7);
++	dbg_ltq_writel(&mac_pdi_regs->ctrl_6,
++		(6 << LTQ_ETHSW_MAC_CTRL6_RBUF_DLY_WP_SHIFT) |
++		LTQ_ETHSW_MAC_CTRL6_RXBUF_BYPASS);
++
++	/* Set request assertion threshold to 8, IPG counter to 11 */
++	dbg_ltq_writel(&ltq_ethsw_pmac_pdi_regs->rx_ipg, 0x8B);
++
++	/*
++	* Configure frame header control:
++	* - enable reaction on pause frames (flow control)
++	* - remove CRC for packets from PMAC to DMA
++	* - add CRC for packets from DMA to PMAC
++	*/
++	dbg_ltq_writel(&ltq_ethsw_pmac_pdi_regs->hd_ctl, LTQ_ETHSW_PMAC_HD_CTL_FC |
++		/*LTQ_ETHSW_PMAC_HD_CTL_RC | */LTQ_ETHSW_PMAC_HD_CTL_AC);
++}
++
++static int
++ltq_vrx200_hw_init(struct net_device *dev)
++{
++	struct ltq_vrx200_priv *priv = netdev_priv(dev);
++	int err = 0;
++	int i;
++
++	netdev_info(dev, "setting up dma\n");
++	ltq_dma_init_port(DMA_PORT_ETOP);
++
++	netdev_info(dev, "setting up pmu\n");
++	clk_enable(priv->clk_ppe);
++
++	/* Reset ethernet and switch subsystems */
++	netdev_info(dev, "reset core\n");
++	ltq_reset_once(BIT(8), 10);
++
++	/* Enable switch macro */
++	ltq_setbits(&ltq_ethsw_mdio_pdi_regs->glob_ctrl,
++		LTQ_ETHSW_GLOB_CTRL_SE);
++
++	/* Disable MDIO auto-polling for all ports */
++	dbg_ltq_writel(&ltq_ethsw_mdio_pdi_regs->mdc_cfg_0, 0);
++
++	/*
++	 * Enable and set MDIO management clock to 2.5 MHz. This is the
++	 * maximum clock for FE PHYs.
++	 * Formula for clock is:
++	 *
++	 *      50 MHz
++	 * x = ----------- - 1
++	 *      2 * f_MDC
++	 */
++	dbg_ltq_writel(&ltq_ethsw_mdio_pdi_regs->mdc_cfg_1,
++		LTQ_ETHSW_MDC_CFG1_MCEN | 9);
++
++	/* Init MAC connected to CPU  */
++	ltq_eth_pmac_init();
++
++	/* Init MACs connected to external MII interfaces */
++	for (i = 0; i < LTQ_ETHSW_MAX_GMAC; i++)
++		ltq_eth_gmac_init(i);
++
++	for (i = 0; i < MAX_DMA_CHAN && !err; i++) {
++		int irq = LTQ_DMA_ETOP + i;
++		struct ltq_vrx200_chan *ch = &priv->ch[i];
++
++		ch->idx = ch->dma.nr = i;
++
++		if (IS_TX(i)) {
++			ltq_dma_alloc_tx(&ch->dma);
++			err = request_irq(irq, ltq_vrx200_dma_irq, IRQF_DISABLED,
++				"vrx200_tx", priv);
++		} else if (IS_RX(i)) {
++			ltq_dma_alloc_rx(&ch->dma);
++			for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
++					ch->dma.desc++)
++				if (ltq_vrx200_alloc_skb(ch))
++					err = -ENOMEM;
++			ch->dma.desc = 0;
++			err = request_irq(irq, ltq_vrx200_dma_irq, IRQF_DISABLED,
++				"vrx200_rx", priv);
++		}
++		if (!err)
++			ch->dma.irq = irq;
++	}
++	for (i = 0; i < board_config.num_ports; i++)
++		ltq_eth_port_config(priv, &board_config.ports[i]);
++	return err;
++}
++
++static void
++ltq_vrx200_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
++{
++	strcpy(info->driver, "Lantiq ETOP");
++	strcpy(info->bus_info, "internal");
++	strcpy(info->version, DRV_VERSION);
++}
++
++static int
++ltq_vrx200_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
++{
++	struct ltq_vrx200_priv *priv = netdev_priv(dev);
++
++	return phy_ethtool_gset(priv->phydev, cmd);
++}
++
++static int
++ltq_vrx200_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
++{
++	struct ltq_vrx200_priv *priv = netdev_priv(dev);
++
++	return phy_ethtool_sset(priv->phydev, cmd);
++}
++
++static int
++ltq_vrx200_nway_reset(struct net_device *dev)
++{
++	struct ltq_vrx200_priv *priv = netdev_priv(dev);
++
++	return phy_start_aneg(priv->phydev);
++}
++
++static const struct ethtool_ops ltq_vrx200_ethtool_ops = {
++	.get_drvinfo = ltq_vrx200_get_drvinfo,
++	.get_settings = ltq_vrx200_get_settings,
++	.set_settings = ltq_vrx200_set_settings,
++	.nway_reset = ltq_vrx200_nway_reset,
++};
++
++static inline int ltq_mdio_poll(struct mii_bus *bus)
++{
++	struct ltq_mdio_access acc;
++	unsigned cnt = 10000;
++
++	while (likely(cnt--)) {
++		acc.val = ltq_r32(&ltq_ethsw_mdio_pdi_regs->mdio_ctrl);
++		if (!acc.bits.mbusy)
++			return 0;
++	}
++
++	return 1;
++}
++
++static int
++ltq_vrx200_mdio_wr(struct mii_bus *bus, int addr, int regnum, u16 val)
++{
++	struct ltq_mdio_access acc;
++	int ret;
++
++	acc.val = 0;
++	acc.bits.mbusy = LTQ_MDIO_MBUSY_BUSY;
++	acc.bits.op = LTQ_MDIO_OP_WRITE;
++	acc.bits.phyad = addr;
++	acc.bits.regad = regnum;
++
++	ret = ltq_mdio_poll(bus);
++	if (ret)
++		return ret;
++
++	dbg_ltq_writel(&ltq_ethsw_mdio_pdi_regs->mdio_write, val);
++	dbg_ltq_writel(&ltq_ethsw_mdio_pdi_regs->mdio_ctrl, acc.val);
++
++	return 0;
++}
++
++static int
++ltq_vrx200_mdio_rd(struct mii_bus *bus, int addr, int regnum)
++{
++	struct ltq_mdio_access acc;
++	int ret;
++
++	acc.val = 0;
++	acc.bits.mbusy = LTQ_MDIO_MBUSY_BUSY;
++	acc.bits.op = LTQ_MDIO_OP_READ;
++	acc.bits.phyad = addr;
++	acc.bits.regad = regnum;
++
++	ret = ltq_mdio_poll(bus);
++	if (ret)
++		goto timeout;
++
++	dbg_ltq_writel(&ltq_ethsw_mdio_pdi_regs->mdio_ctrl, acc.val);
++
++	ret = ltq_mdio_poll(bus);
++	if (ret)
++		goto timeout;
++
++	ret = ltq_r32(&ltq_ethsw_mdio_pdi_regs->mdio_read);
++
++	return ret;
++timeout:
++	return -1;
++}
++
++static void
++ltq_vrx200_mdio_link(struct net_device *dev)
++{
++	struct ltq_vrx200_priv *priv = netdev_priv(dev);
++	ltq_eth_gmac_update(priv->phydev, 0);
++}
++
++static int
++ltq_vrx200_mdio_probe(struct net_device *dev)
++{
++	struct ltq_vrx200_priv *priv = netdev_priv(dev);
++	struct phy_device *phydev = NULL;
++	int val;
++
++	phydev = priv->mii_bus->phy_map[0];
++
++	if (!phydev) {
++		netdev_err(dev, "no PHY found\n");
++		return -ENODEV;
++	}
++
++	phydev = phy_connect(dev, dev_name(&phydev->dev), &ltq_vrx200_mdio_link,
++			0, 0);
++
++	if (IS_ERR(phydev)) {
++		netdev_err(dev, "Could not attach to PHY\n");
++		return PTR_ERR(phydev);
++	}
++
++	phydev->supported &= (SUPPORTED_10baseT_Half
++			      | SUPPORTED_10baseT_Full
++			      | SUPPORTED_100baseT_Half
++			      | SUPPORTED_100baseT_Full
++			      | SUPPORTED_1000baseT_Half
++			      | SUPPORTED_1000baseT_Full
++			      | SUPPORTED_Autoneg
++			      | SUPPORTED_MII
++			      | SUPPORTED_TP);
++	phydev->advertising = phydev->supported;
++	priv->phydev = phydev;
++
++	pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",
++	       dev->name, phydev->drv->name,
++	       dev_name(&phydev->dev), phydev->irq);
++
++	val = ltq_vrx200_mdio_rd(priv->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000);
++	val |= ADVERTIZE_MPD;
++	ltq_vrx200_mdio_wr(priv->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000, val);
++	ltq_vrx200_mdio_wr(priv->mii_bus, 0, 0, 0x1040);
++
++        phy_start_aneg(phydev);
++
++	return 0;
++}
++
++static int
++ltq_vrx200_mdio_init(struct net_device *dev)
++{
++	struct ltq_vrx200_priv *priv = netdev_priv(dev);
++	int i;
++	int err;
++
++	priv->mii_bus = mdiobus_alloc();
++	if (!priv->mii_bus) {
++		netdev_err(dev, "failed to allocate mii bus\n");
++		err = -ENOMEM;
++		goto err_out;
++	}
++
++	priv->mii_bus->priv = dev;
++	priv->mii_bus->read = ltq_vrx200_mdio_rd;
++	priv->mii_bus->write = ltq_vrx200_mdio_wr;
++	priv->mii_bus->name = "ltq_mii";
++	snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
++	priv->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
++	if (!priv->mii_bus->irq) {
++		err = -ENOMEM;
++		goto err_out_free_mdiobus;
++	}
++
++	for (i = 0; i < PHY_MAX_ADDR; ++i)
++		priv->mii_bus->irq[i] = PHY_POLL;
++
++	if (mdiobus_register(priv->mii_bus)) {
++		err = -ENXIO;
++		goto err_out_free_mdio_irq;
++	}
++
++	if (ltq_vrx200_mdio_probe(dev)) {
++		err = -ENXIO;
++		goto err_out_unregister_bus;
++	}
++	return 0;
++
++err_out_unregister_bus:
++	mdiobus_unregister(priv->mii_bus);
++err_out_free_mdio_irq:
++	kfree(priv->mii_bus->irq);
++err_out_free_mdiobus:
++	mdiobus_free(priv->mii_bus);
++err_out:
++	return err;
++}
++
++static void
++ltq_vrx200_mdio_cleanup(struct net_device *dev)
++{
++	struct ltq_vrx200_priv *priv = netdev_priv(dev);
++
++	phy_disconnect(priv->phydev);
++	mdiobus_unregister(priv->mii_bus);
++	kfree(priv->mii_bus->irq);
++	mdiobus_free(priv->mii_bus);
++}
++
++void phy_dump(struct net_device *dev)
++{
++        struct ltq_vrx200_priv *priv = netdev_priv(dev);
++	int i;
++	for (i = 0; i < 0x1F; i++) {
++		unsigned int val = ltq_vrx200_mdio_rd(priv->mii_bus, 0, i);
++		printk("%d %4X\n", i, val);
++	}
++}
++
++static int
++ltq_vrx200_open(struct net_device *dev)
++{
++	struct ltq_vrx200_priv *priv = netdev_priv(dev);
++	int i;
++	unsigned long flags;
++
++	for (i = 0; i < MAX_DMA_CHAN; i++) {
++		struct ltq_vrx200_chan *ch = &priv->ch[i];
++
++		if (!IS_TX(i) && (!IS_RX(i)))
++			continue;
++		napi_enable(&ch->napi);
++		spin_lock_irqsave(&priv->lock, flags);
++		ltq_dma_open(&ch->dma);
++		spin_unlock_irqrestore(&priv->lock, flags);
++	}
++	if (priv->phydev) {
++		phy_start(priv->phydev);
++		phy_dump(dev);
++	}
++	netif_tx_start_all_queues(dev);
++	return 0;
++}
++
++static int
++ltq_vrx200_stop(struct net_device *dev)
++{
++	struct ltq_vrx200_priv *priv = netdev_priv(dev);
++	int i;
++	unsigned long flags;
++
++	netif_tx_stop_all_queues(dev);
++	if (priv->phydev)
++		phy_stop(priv->phydev);
++	for (i = 0; i < MAX_DMA_CHAN; i++) {
++		struct ltq_vrx200_chan *ch = &priv->ch[i];
++
++		if (!IS_RX(i) && !IS_TX(i))
++			continue;
++		napi_disable(&ch->napi);
++		spin_lock_irqsave(&priv->lock, flags);
++		ltq_dma_close(&ch->dma);
++		spin_unlock_irqrestore(&priv->lock, flags);
++	}
++	return 0;
++}
++
++static int
++ltq_vrx200_tx(struct sk_buff *skb, struct net_device *dev)
++{
++	int queue = skb_get_queue_mapping(skb);
++	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
++	struct ltq_vrx200_priv *priv = netdev_priv(dev);
++	struct ltq_vrx200_chan *ch = &priv->ch[(queue << 1) | 1];
++	struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
++	unsigned long flags;
++	u32 byte_offset;
++	int len;
++
++	len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
++
++	if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
++		netdev_err(dev, "tx ring full\n");
++		netif_tx_stop_queue(txq);
++		return NETDEV_TX_BUSY;
++	}
++
++	/* dma needs to start on a 16 byte aligned address */
++	byte_offset = CPHYSADDR(skb->data) % 16;
++	ch->skb[ch->dma.desc] = skb;
++
++	dev->trans_start = jiffies;
++
++	spin_lock_irqsave(&priv->lock, flags);
++	desc->addr = ((unsigned int) dma_map_single(NULL, skb->data, len,
++						DMA_TO_DEVICE)) - byte_offset;
++	wmb();
++	desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
++		LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
++	ch->dma.desc++;
++	ch->dma.desc %= LTQ_DESC_NUM;
++	spin_unlock_irqrestore(&priv->lock, flags);
++
++	if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN)
++		netif_tx_stop_queue(txq);
++
++	return NETDEV_TX_OK;
++}
++
++static int
++ltq_vrx200_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
++{
++	struct ltq_vrx200_priv *priv = netdev_priv(dev);
++
++	/* TODO: mii-toll reports "No MII transceiver present!." ?!*/
++	return phy_mii_ioctl(priv->phydev, rq, cmd);
++}
++
++static u16
++ltq_vrx200_select_queue(struct net_device *dev, struct sk_buff *skb)
++{
++	/* we are currently only using the first queue */
++	return 0;
++}
++
++static int
++ltq_vrx200_init(struct net_device *dev)
++{
++	struct ltq_vrx200_priv *priv = netdev_priv(dev);
++	struct sockaddr mac;
++	int err;
++
++	ether_setup(dev);
++	dev->watchdog_timeo = 10 * HZ;
++
++	err = ltq_vrx200_hw_init(dev);
++	if (err)
++		goto err_hw;
++
++	memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
++	if (!is_valid_ether_addr(mac.sa_data)) {
++		pr_warn("vrx200: invalid MAC, using random\n");
++		random_ether_addr(mac.sa_data);
++	}
++	eth_mac_addr(dev, &mac);
++
++	if (!ltq_vrx200_mdio_init(dev))
++		dev->ethtool_ops = &ltq_vrx200_ethtool_ops;
++	else
++		pr_warn("vrx200: mdio probe failed\n");;
++	return 0;
++
++err_hw:
++	ltq_vrx200_hw_exit(dev);
++	return err;
++}
++
++static void
++ltq_vrx200_tx_timeout(struct net_device *dev)
++{
++	int err;
++
++	ltq_vrx200_hw_exit(dev);
++	err = ltq_vrx200_hw_init(dev);
++	if (err)
++		goto err_hw;
++	dev->trans_start = jiffies;
++	netif_wake_queue(dev);
++	return;
++
++err_hw:
++	ltq_vrx200_hw_exit(dev);
++	netdev_err(dev, "failed to restart vrx200 after TX timeout\n");
++}
++
++static const struct net_device_ops ltq_eth_netdev_ops = {
++	.ndo_open = ltq_vrx200_open,
++	.ndo_stop = ltq_vrx200_stop,
++	.ndo_start_xmit = ltq_vrx200_tx,
++	.ndo_change_mtu = eth_change_mtu,
++	.ndo_do_ioctl = ltq_vrx200_ioctl,
++	.ndo_set_mac_address = eth_mac_addr,
++	.ndo_validate_addr = eth_validate_addr,
++	.ndo_select_queue = ltq_vrx200_select_queue,
++	.ndo_init = ltq_vrx200_init,
++	.ndo_tx_timeout = ltq_vrx200_tx_timeout,
++};
++
++static int __devinit
++ltq_vrx200_probe(struct platform_device *pdev)
++{
++	struct net_device *dev;
++	struct ltq_vrx200_priv *priv;
++	struct resource *res;
++	int err;
++	int i;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res) {
++		dev_err(&pdev->dev, "failed to get vrx200 resource\n");
++		err = -ENOENT;
++		goto err_out;
++	}
++
++	res = devm_request_mem_region(&pdev->dev, res->start,
++		resource_size(res), dev_name(&pdev->dev));
++	if (!res) {
++		dev_err(&pdev->dev, "failed to request vrx200 resource\n");
++		err = -EBUSY;
++		goto err_out;
++	}
++
++	ltq_vrx200_membase = devm_ioremap_nocache(&pdev->dev,
++		res->start, resource_size(res));
++	if (!ltq_vrx200_membase) {
++		dev_err(&pdev->dev, "failed to remap vrx200 engine %d\n",
++			pdev->id);
++		err = -ENOMEM;
++		goto err_out;
++	}
++
++	if (ltq_gpio_request(&pdev->dev, 42, 2, 1, "MDIO") ||
++			ltq_gpio_request(&pdev->dev, 43, 2, 1, "MDC")) {
++		dev_err(&pdev->dev, "failed to request MDIO gpios\n");
++		err = -EBUSY;
++		goto err_out;
++	}
++
++	dev = alloc_etherdev_mq(sizeof(struct ltq_vrx200_priv), 4);
++	strcpy(dev->name, "eth%d");
++	dev->netdev_ops = &ltq_eth_netdev_ops;
++	priv = netdev_priv(dev);
++	priv->res = res;
++	priv->pldata = dev_get_platdata(&pdev->dev);
++	priv->netdev = dev;
++
++	priv->clk_ppe = clk_get(&pdev->dev, NULL);
++	if (IS_ERR(priv->clk_ppe))
++		return PTR_ERR(priv->clk_ppe);
++
++	spin_lock_init(&priv->lock);
++
++	for (i = 0; i < MAX_DMA_CHAN; i++) {
++		if (IS_TX(i))
++			netif_napi_add(dev, &priv->ch[i].napi,
++				ltq_vrx200_poll_tx, 8);
++		else if (IS_RX(i))
++			netif_napi_add(dev, &priv->ch[i].napi,
++				ltq_vrx200_poll_rx, 32);
++		priv->ch[i].netdev = dev;
++	}
++
++	err = register_netdev(dev);
++	if (err)
++		goto err_free;
++
++	platform_set_drvdata(pdev, dev);
++	return 0;
++
++err_free:
++	kfree(dev);
++err_out:
++	return err;
++}
++
++static int __devexit
++ltq_vrx200_remove(struct platform_device *pdev)
++{
++	struct net_device *dev = platform_get_drvdata(pdev);
++
++	if (dev) {
++		netif_tx_stop_all_queues(dev);
++		ltq_vrx200_hw_exit(dev);
++		ltq_vrx200_mdio_cleanup(dev);
++		unregister_netdev(dev);
++	}
++	return 0;
++}
++
++static struct platform_driver ltq_mii_driver = {
++	.probe = ltq_vrx200_probe,
++	.remove = __devexit_p(ltq_vrx200_remove),
++	.driver = {
++		.name = "ltq_vrx200",
++		.owner = THIS_MODULE,
++	},
++};
++
++module_platform_driver(ltq_mii_driver);
++
++MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
++MODULE_DESCRIPTION("Lantiq SoC ETOP");
++MODULE_LICENSE("GPL");
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0040-MIPS-NET-several-fixes-to-etop-driver.patch b/target/linux/lantiq/patches-3.3/0040-MIPS-NET-several-fixes-to-etop-driver.patch
new file mode 100644
index 0000000000..9fc353442a
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0040-MIPS-NET-several-fixes-to-etop-driver.patch
@@ -0,0 +1,445 @@
+From 45af082d0feb0c458d7636f6453702b8dcdfc823 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 21 Mar 2012 18:14:06 +0100
+Subject: [PATCH 40/70] MIPS: NET: several fixes to etop driver
+
+---
+ drivers/net/ethernet/lantiq_etop.c |  208 +++++++++++++++++++-----------------
+ 1 files changed, 108 insertions(+), 100 deletions(-)
+
+diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
+index 8fbb069..97ddb09 100644
+--- a/drivers/net/ethernet/lantiq_etop.c
++++ b/drivers/net/ethernet/lantiq_etop.c
+@@ -103,15 +103,6 @@
+ /* the newer xway socks have a embedded 3/7 port gbit multiplexer */
+ #define ltq_has_gbit()		(ltq_is_ar9() || ltq_is_vr9())
+ 
+-/* use 2 static channels for TX/RX
+-   depending on the SoC we need to use different DMA channels for ethernet */
+-#define LTQ_ETOP_TX_CHANNEL	1
+-#define LTQ_ETOP_RX_CHANNEL	((ltq_is_ase()) ? (5) : \
+-				((ltq_has_gbit()) ? (0) : (6)))
+-
+-#define IS_TX(x)		(x == LTQ_ETOP_TX_CHANNEL)
+-#define IS_RX(x)		(x == LTQ_ETOP_RX_CHANNEL)
+-
+ #define ltq_etop_r32(x)		ltq_r32(ltq_etop_membase + (x))
+ #define ltq_etop_w32(x, y)	ltq_w32(x, ltq_etop_membase + (y))
+ #define ltq_etop_w32_mask(x, y, z)	\
+@@ -128,8 +119,8 @@ static void __iomem *ltq_etop_membase;
+ static void __iomem *ltq_gbit_membase;
+ 
+ struct ltq_etop_chan {
+-	int idx;
+ 	int tx_free;
++	int irq;
+ 	struct net_device *netdev;
+ 	struct napi_struct napi;
+ 	struct ltq_dma_channel dma;
+@@ -145,8 +136,8 @@ struct ltq_etop_priv {
+ 	struct mii_bus *mii_bus;
+ 	struct phy_device *phydev;
+ 
+-	struct ltq_etop_chan ch[MAX_DMA_CHAN];
+-	int tx_free[MAX_DMA_CHAN >> 1];
++	struct ltq_etop_chan txch;
++	struct ltq_etop_chan rxch;
+ 
+ 	spinlock_t lock;
+ 
+@@ -207,8 +198,10 @@ ltq_etop_poll_rx(struct napi_struct *napi, int budget)
+ {
+ 	struct ltq_etop_chan *ch = container_of(napi,
+ 				struct ltq_etop_chan, napi);
++	struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
+ 	int rx = 0;
+ 	int complete = 0;
++	unsigned long flags;
+ 
+ 	while ((rx < budget) && !complete) {
+ 		struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+@@ -222,7 +215,9 @@ ltq_etop_poll_rx(struct napi_struct *napi, int budget)
+ 	}
+ 	if (complete || !rx) {
+ 		napi_complete(&ch->napi);
++		spin_lock_irqsave(&priv->lock, flags);
+ 		ltq_dma_ack_irq(&ch->dma);
++		spin_unlock_irqrestore(&priv->lock, flags);
+ 	}
+ 	return rx;
+ }
+@@ -234,7 +229,7 @@ ltq_etop_poll_tx(struct napi_struct *napi, int budget)
+ 		container_of(napi, struct ltq_etop_chan, napi);
+ 	struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
+ 	struct netdev_queue *txq =
+-		netdev_get_tx_queue(ch->netdev, ch->idx >> 1);
++		netdev_get_tx_queue(ch->netdev, ch->dma.nr >> 1);
+ 	unsigned long flags;
+ 
+ 	spin_lock_irqsave(&priv->lock, flags);
+@@ -252,7 +247,9 @@ ltq_etop_poll_tx(struct napi_struct *napi, int budget)
+ 	if (netif_tx_queue_stopped(txq))
+ 		netif_tx_start_queue(txq);
+ 	napi_complete(&ch->napi);
++	spin_lock_irqsave(&priv->lock, flags);
+ 	ltq_dma_ack_irq(&ch->dma);
++	spin_unlock_irqrestore(&priv->lock, flags);
+ 	return 1;
+ }
+ 
+@@ -260,9 +257,10 @@ static irqreturn_t
+ ltq_etop_dma_irq(int irq, void *_priv)
+ {
+ 	struct ltq_etop_priv *priv = _priv;
+-	int ch = irq - LTQ_DMA_ETOP;
+-
+-	napi_schedule(&priv->ch[ch].napi);
++	if (irq == priv->txch.dma.irq)
++		napi_schedule(&priv->txch.napi);
++	else
++		napi_schedule(&priv->rxch.napi);
+ 	return IRQ_HANDLED;
+ }
+ 
+@@ -274,7 +272,7 @@ ltq_etop_free_channel(struct net_device *dev, struct ltq_etop_chan *ch)
+ 	ltq_dma_free(&ch->dma);
+ 	if (ch->dma.irq)
+ 		free_irq(ch->dma.irq, priv);
+-	if (IS_RX(ch->idx)) {
++	if (ch == &priv->txch) {
+ 		int desc;
+ 		for (desc = 0; desc < LTQ_DESC_NUM; desc++)
+ 			dev_kfree_skb_any(ch->skb[ch->dma.desc]);
+@@ -285,7 +283,6 @@ static void
+ ltq_etop_hw_exit(struct net_device *dev)
+ {
+ 	struct ltq_etop_priv *priv = netdev_priv(dev);
+-	int i;
+ 
+ 	clk_disable(priv->clk_ppe);
+ 
+@@ -297,9 +294,8 @@ ltq_etop_hw_exit(struct net_device *dev)
+ 		clk_disable(priv->clk_ephycgu);
+ 	}
+ 
+-	for (i = 0; i < MAX_DMA_CHAN; i++)
+-		if (IS_TX(i) || IS_RX(i))
+-			ltq_etop_free_channel(dev, &priv->ch[i]);
++	ltq_etop_free_channel(dev, &priv->txch);
++	ltq_etop_free_channel(dev, &priv->rxch);
+ }
+ 
+ static void
+@@ -327,8 +323,6 @@ ltq_etop_hw_init(struct net_device *dev)
+ {
+ 	struct ltq_etop_priv *priv = netdev_priv(dev);
+ 	unsigned int mii_mode = priv->pldata->mii_mode;
+-	int err = 0;
+-	int i;
+ 
+ 	clk_enable(priv->clk_ppe);
+ 
+@@ -370,31 +364,50 @@ ltq_etop_hw_init(struct net_device *dev)
+ 	/* enable crc generation */
+ 	ltq_etop_w32(PPE32_CGEN, LQ_PPE32_ENET_MAC_CFG);
+ 
++	return 0;
++}
++
++static int
++ltq_etop_dma_init(struct net_device *dev)
++{
++	struct ltq_etop_priv *priv = netdev_priv(dev);
++	int tx = 1;
++	int rx = ((ltq_is_ase()) ? (5) : \
++		((ltq_is_ar9()) ? (0) : (6)));
++	int tx_irq = LTQ_DMA_ETOP + tx;
++	int rx_irq = LTQ_DMA_ETOP + rx;
++	int err;
++
+ 	ltq_dma_init_port(DMA_PORT_ETOP);
+ 
+-	for (i = 0; i < MAX_DMA_CHAN && !err; i++) {
+-		int irq = LTQ_DMA_ETOP + i;
+-		struct ltq_etop_chan *ch = &priv->ch[i];
+-
+-		ch->idx = ch->dma.nr = i;
+-
+-		if (IS_TX(i)) {
+-			ltq_dma_alloc_tx(&ch->dma);
+-			err = request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
+-				"etop_tx", priv);
+-		} else if (IS_RX(i)) {
+-			ltq_dma_alloc_rx(&ch->dma);
+-			for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
+-					ch->dma.desc++)
+-				if (ltq_etop_alloc_skb(ch))
+-					err = -ENOMEM;
+-			ch->dma.desc = 0;
+-			err = request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
+-				"etop_rx", priv);
++	priv->txch.dma.nr = tx;
++	ltq_dma_alloc_tx(&priv->txch.dma);
++	err = request_irq(tx_irq, ltq_etop_dma_irq, IRQF_DISABLED,
++		"eth_tx", priv);
++	if (err) {
++		netdev_err(dev, "failed to allocate tx irq\n");
++		goto err_out;
++	}
++	priv->txch.dma.irq = tx_irq;
++
++	priv->rxch.dma.nr = rx;
++	ltq_dma_alloc_rx(&priv->rxch.dma);
++	for (priv->rxch.dma.desc = 0; priv->rxch.dma.desc < LTQ_DESC_NUM;
++			priv->rxch.dma.desc++) {
++		if (ltq_etop_alloc_skb(&priv->rxch)) {
++			netdev_err(dev, "failed to allocate skbs\n");
++			err = -ENOMEM;
++			goto err_out;
+ 		}
+-		if (!err)
+-			ch->dma.irq = irq;
+ 	}
++	priv->rxch.dma.desc = 0;
++	err = request_irq(rx_irq, ltq_etop_dma_irq, IRQF_DISABLED,
++		"eth_rx", priv);
++	if (err)
++		netdev_err(dev, "failed to allocate rx irq\n");
++	else
++		priv->rxch.dma.irq = rx_irq;
++err_out:
+ 	return err;
+ }
+ 
+@@ -411,7 +424,10 @@ ltq_etop_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ 	struct ltq_etop_priv *priv = netdev_priv(dev);
+ 
+-	return phy_ethtool_gset(priv->phydev, cmd);
++	if (priv->phydev)
++		return phy_ethtool_gset(priv->phydev, cmd);
++	else
++		return 0;
+ }
+ 
+ static int
+@@ -419,7 +435,10 @@ ltq_etop_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ 	struct ltq_etop_priv *priv = netdev_priv(dev);
+ 
+-	return phy_ethtool_sset(priv->phydev, cmd);
++	if (priv->phydev)
++		return phy_ethtool_sset(priv->phydev, cmd);
++	else
++		return 0;
+ }
+ 
+ static int
+@@ -427,7 +446,10 @@ ltq_etop_nway_reset(struct net_device *dev)
+ {
+ 	struct ltq_etop_priv *priv = netdev_priv(dev);
+ 
+-	return phy_start_aneg(priv->phydev);
++	if (priv->phydev)
++		return phy_start_aneg(priv->phydev);
++	else
++		return 0;
+ }
+ 
+ static const struct ethtool_ops ltq_etop_ethtool_ops = {
+@@ -620,18 +642,19 @@ static int
+ ltq_etop_open(struct net_device *dev)
+ {
+ 	struct ltq_etop_priv *priv = netdev_priv(dev);
+-	int i;
++	unsigned long flags;
+ 
+-	for (i = 0; i < MAX_DMA_CHAN; i++) {
+-		struct ltq_etop_chan *ch = &priv->ch[i];
++	napi_enable(&priv->txch.napi);
++	napi_enable(&priv->rxch.napi);
++
++	spin_lock_irqsave(&priv->lock, flags);
++	ltq_dma_open(&priv->txch.dma);
++	ltq_dma_open(&priv->rxch.dma);
++	spin_unlock_irqrestore(&priv->lock, flags);
+ 
+-		if (!IS_TX(i) && (!IS_RX(i)))
+-			continue;
+-		ltq_dma_open(&ch->dma);
+-		napi_enable(&ch->napi);
+-	}
+ 	if (priv->phydev)
+ 		phy_start(priv->phydev);
++
+ 	netif_tx_start_all_queues(dev);
+ 	return 0;
+ }
+@@ -640,19 +663,19 @@ static int
+ ltq_etop_stop(struct net_device *dev)
+ {
+ 	struct ltq_etop_priv *priv = netdev_priv(dev);
+-	int i;
++	unsigned long flags;
+ 
+ 	netif_tx_stop_all_queues(dev);
+ 	if (priv->phydev)
+ 		phy_stop(priv->phydev);
+-	for (i = 0; i < MAX_DMA_CHAN; i++) {
+-		struct ltq_etop_chan *ch = &priv->ch[i];
++	napi_disable(&priv->txch.napi);
++	napi_disable(&priv->rxch.napi);
++
++	spin_lock_irqsave(&priv->lock, flags);
++	ltq_dma_close(&priv->txch.dma);
++	ltq_dma_close(&priv->rxch.dma);
++	spin_unlock_irqrestore(&priv->lock, flags);
+ 
+-		if (!IS_RX(i) && !IS_TX(i))
+-			continue;
+-		napi_disable(&ch->napi);
+-		ltq_dma_close(&ch->dma);
+-	}
+ 	return 0;
+ }
+ 
+@@ -662,16 +685,16 @@ ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
+ 	int queue = skb_get_queue_mapping(skb);
+ 	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
+ 	struct ltq_etop_priv *priv = netdev_priv(dev);
+-	struct ltq_etop_chan *ch = &priv->ch[(queue << 1) | 1];
+-	struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
++	struct ltq_dma_desc *desc =
++		&priv->txch.dma.desc_base[priv->txch.dma.desc];
+ 	unsigned long flags;
+ 	u32 byte_offset;
+ 	int len;
+ 
+ 	len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+ 
+-	if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
+-		dev_kfree_skb_any(skb);
++	if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) ||
++			priv->txch.skb[priv->txch.dma.desc]) {
+ 		netdev_err(dev, "tx ring full\n");
+ 		netif_tx_stop_queue(txq);
+ 		return NETDEV_TX_BUSY;
+@@ -679,7 +702,7 @@ ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
+ 
+ 	/* dma needs to start on a 16 byte aligned address */
+ 	byte_offset = CPHYSADDR(skb->data) % 16;
+-	ch->skb[ch->dma.desc] = skb;
++	priv->txch.skb[priv->txch.dma.desc] = skb;
+ 
+ 	dev->trans_start = jiffies;
+ 
+@@ -689,11 +712,11 @@ ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
+ 	wmb();
+ 	desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
+ 		LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
+-	ch->dma.desc++;
+-	ch->dma.desc %= LTQ_DESC_NUM;
++	priv->txch.dma.desc++;
++	priv->txch.dma.desc %= LTQ_DESC_NUM;
+ 	spin_unlock_irqrestore(&priv->lock, flags);
+ 
+-	if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN)
++	if (priv->txch.dma.desc_base[priv->txch.dma.desc].ctl & LTQ_DMA_OWN)
+ 		netif_tx_stop_queue(txq);
+ 
+ 	return NETDEV_TX_OK;
+@@ -778,6 +801,10 @@ ltq_etop_init(struct net_device *dev)
+ 	err = ltq_etop_hw_init(dev);
+ 	if (err)
+ 		goto err_hw;
++	err = ltq_etop_dma_init(dev);
++	if (err)
++		goto err_hw;
++
+ 	ltq_etop_change_mtu(dev, 1500);
+ 
+ 	memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
+@@ -813,6 +840,9 @@ ltq_etop_tx_timeout(struct net_device *dev)
+ 	err = ltq_etop_hw_init(dev);
+ 	if (err)
+ 		goto err_hw;
++	err = ltq_etop_dma_init(dev);
++	if (err)
++		goto err_hw;
+ 	dev->trans_start = jiffies;
+ 	netif_wake_queue(dev);
+ 	return;
+@@ -836,14 +866,13 @@ static const struct net_device_ops ltq_eth_netdev_ops = {
+ 	.ndo_tx_timeout = ltq_etop_tx_timeout,
+ };
+ 
+-static int __init
++static int __devinit
+ ltq_etop_probe(struct platform_device *pdev)
+ {
+ 	struct net_device *dev;
+ 	struct ltq_etop_priv *priv;
+ 	struct resource *res, *gbit_res;
+ 	int err;
+-	int i;
+ 
+ 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ 	if (!res) {
+@@ -920,15 +949,10 @@ ltq_etop_probe(struct platform_device *pdev)
+ 
+ 	spin_lock_init(&priv->lock);
+ 
+-	for (i = 0; i < MAX_DMA_CHAN; i++) {
+-		if (IS_TX(i))
+-			netif_napi_add(dev, &priv->ch[i].napi,
+-				ltq_etop_poll_tx, 8);
+-		else if (IS_RX(i))
+-			netif_napi_add(dev, &priv->ch[i].napi,
+-				ltq_etop_poll_rx, 32);
+-		priv->ch[i].netdev = dev;
+-	}
++	netif_napi_add(dev, &priv->txch.napi, ltq_etop_poll_tx, 8);
++	netif_napi_add(dev, &priv->rxch.napi, ltq_etop_poll_rx, 32);
++	priv->txch.netdev = dev;
++	priv->rxch.netdev = dev;
+ 
+ 	err = register_netdev(dev);
+ 	if (err)
+@@ -958,6 +982,7 @@ ltq_etop_remove(struct platform_device *pdev)
+ }
+ 
+ static struct platform_driver ltq_mii_driver = {
++	.probe = ltq_etop_probe,
+ 	.remove = __devexit_p(ltq_etop_remove),
+ 	.driver = {
+ 		.name = "ltq_etop",
+@@ -965,24 +990,7 @@ static struct platform_driver ltq_mii_driver = {
+ 	},
+ };
+ 
+-int __init
+-init_ltq_etop(void)
+-{
+-	int ret = platform_driver_probe(&ltq_mii_driver, ltq_etop_probe);
+-
+-	if (ret)
+-		pr_err("ltq_etop: Error registering platfom driver!");
+-	return ret;
+-}
+-
+-static void __exit
+-exit_ltq_etop(void)
+-{
+-	platform_driver_unregister(&ltq_mii_driver);
+-}
+-
+-module_init(init_ltq_etop);
+-module_exit(exit_ltq_etop);
++module_platform_driver(ltq_mii_driver);
+ 
+ MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+ MODULE_DESCRIPTION("Lantiq SoC ETOP");
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0041-MTD-MIPS-lantiq-use-module_platform_driver-inside-la.patch b/target/linux/lantiq/patches-3.3/0041-MTD-MIPS-lantiq-use-module_platform_driver-inside-la.patch
new file mode 100644
index 0000000000..28a20f4235
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0041-MTD-MIPS-lantiq-use-module_platform_driver-inside-la.patch
@@ -0,0 +1,64 @@
+From 94ca79b8bd9bf8ec5dcd993e0f004056f12f16f4 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 20 Feb 2012 12:15:25 +0100
+Subject: [PATCH 41/70] MTD: MIPS: lantiq: use module_platform_driver inside
+ lantiq map driver
+
+Reduce boilerplate code by converting driver to module_platform_driver.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Cc: linux-mtd@lists.infradead.org
+---
+ drivers/mtd/maps/lantiq-flash.c |   22 +++-------------------
+ 1 files changed, 3 insertions(+), 19 deletions(-)
+
+diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c
+index cf7a3cd..ccc6954 100644
+--- a/drivers/mtd/maps/lantiq-flash.c
++++ b/drivers/mtd/maps/lantiq-flash.c
+@@ -108,7 +108,7 @@ ltq_copy_to(struct map_info *map, unsigned long to,
+ 	spin_unlock_irqrestore(&ebu_lock, flags);
+ }
+ 
+-static int __init
++static int __devinit
+ ltq_mtd_probe(struct platform_device *pdev)
+ {
+ 	struct physmap_flash_data *ltq_mtd_data = dev_get_platdata(&pdev->dev);
+@@ -204,6 +204,7 @@ ltq_mtd_remove(struct platform_device *pdev)
+ }
+ 
+ static struct platform_driver ltq_mtd_driver = {
++	.probe = ltq_mtd_probe,
+ 	.remove = __devexit_p(ltq_mtd_remove),
+ 	.driver = {
+ 		.name = "ltq_nor",
+@@ -211,24 +212,7 @@ static struct platform_driver ltq_mtd_driver = {
+ 	},
+ };
+ 
+-static int __init
+-init_ltq_mtd(void)
+-{
+-	int ret = platform_driver_probe(&ltq_mtd_driver, ltq_mtd_probe);
+-
+-	if (ret)
+-		pr_err("ltq_nor: error registering platform driver");
+-	return ret;
+-}
+-
+-static void __exit
+-exit_ltq_mtd(void)
+-{
+-	platform_driver_unregister(&ltq_mtd_driver);
+-}
+-
+-module_init(init_ltq_mtd);
+-module_exit(exit_ltq_mtd);
++module_platform_driver(ltq_mtd_driver);
+ 
+ MODULE_LICENSE("GPL");
+ MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0042-WDT-MIPS-lantiq-use-module_platform_driver-inside-la.patch b/target/linux/lantiq/patches-3.3/0042-WDT-MIPS-lantiq-use-module_platform_driver-inside-la.patch
new file mode 100644
index 0000000000..07cf338f80
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0042-WDT-MIPS-lantiq-use-module_platform_driver-inside-la.patch
@@ -0,0 +1,61 @@
+From 9004f152deddba21ab7b0fa3ba0b243fb5cbd5a1 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 20 Feb 2012 12:16:31 +0100
+Subject: [PATCH 42/70] WDT: MIPS: lantiq: use module_platform_driver inside
+ lantiq watchdog driver
+
+Reduce boilerplate code by converting driver to module_platform_driver.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Cc: linux-watchdog@vger.kernel.org
+---
+ drivers/watchdog/lantiq_wdt.c |   19 +++----------------
+ 1 files changed, 3 insertions(+), 16 deletions(-)
+
+diff --git a/drivers/watchdog/lantiq_wdt.c b/drivers/watchdog/lantiq_wdt.c
+index fa4866b..70127b3 100644
+--- a/drivers/watchdog/lantiq_wdt.c
++++ b/drivers/watchdog/lantiq_wdt.c
+@@ -182,7 +182,7 @@ static struct miscdevice ltq_wdt_miscdev = {
+ 	.fops	= &ltq_wdt_fops,
+ };
+ 
+-static int __init
++static int __devinit
+ ltq_wdt_probe(struct platform_device *pdev)
+ {
+ 	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+@@ -227,6 +227,7 @@ ltq_wdt_remove(struct platform_device *pdev)
+ 
+ 
+ static struct platform_driver ltq_wdt_driver = {
++	.probe = ltq_wdt_probe,
+ 	.remove = __devexit_p(ltq_wdt_remove),
+ 	.driver = {
+ 		.name = "ltq_wdt",
+@@ -234,21 +235,7 @@ static struct platform_driver ltq_wdt_driver = {
+ 	},
+ };
+ 
+-static int __init
+-init_ltq_wdt(void)
+-{
+-	return platform_driver_probe(&ltq_wdt_driver, ltq_wdt_probe);
+-}
+-
+-static void __exit
+-exit_ltq_wdt(void)
+-{
+-	return platform_driver_unregister(&ltq_wdt_driver);
+-}
+-
+-module_init(init_ltq_wdt);
+-module_exit(exit_ltq_wdt);
+-
++module_platform_driver(ltq_wdt_driver);
+ module_param(nowayout, int, 0);
+ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
+ 
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0043-MIPS-lantiq-adds-GPTU-driver.patch b/target/linux/lantiq/patches-3.3/0043-MIPS-lantiq-adds-GPTU-driver.patch
new file mode 100644
index 0000000000..64008ca6fe
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0043-MIPS-lantiq-adds-GPTU-driver.patch
@@ -0,0 +1,1052 @@
+From 468364b5da3a0459a313bb9e477bff031f6a9b09 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 29 Sep 2011 17:16:38 +0200
+Subject: [PATCH 43/70] MIPS: lantiq: adds GPTU driver
+
+---
+ arch/mips/include/asm/mach-lantiq/lantiq_timer.h |  155 ++++
+ arch/mips/lantiq/xway/Makefile                   |    2 +-
+ arch/mips/lantiq/xway/sysctrl.c                  |    1 +
+ arch/mips/lantiq/xway/timer.c                    |  846 ++++++++++++++++++++++
+ 4 files changed, 1003 insertions(+), 1 deletions(-)
+ create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_timer.h
+ create mode 100644 arch/mips/lantiq/xway/timer.c
+
+diff --git a/arch/mips/include/asm/mach-lantiq/lantiq_timer.h b/arch/mips/include/asm/mach-lantiq/lantiq_timer.h
+new file mode 100644
+index 0000000..ef564ab
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/lantiq_timer.h
+@@ -0,0 +1,155 @@
++#ifndef __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
++#define __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
++
++
++/******************************************************************************
++       Copyright (c) 2002, Infineon Technologies.  All rights reserved.
++
++                               No Warranty
++   Because the program is licensed free of charge, there is no warranty for
++   the program, to the extent permitted by applicable law.  Except when
++   otherwise stated in writing the copyright holders and/or other parties
++   provide the program "as is" without warranty of any kind, either
++   expressed or implied, including, but not limited to, the implied
++   warranties of merchantability and fitness for a particular purpose. The
++   entire risk as to the quality and performance of the program is with
++   you.  should the program prove defective, you assume the cost of all
++   necessary servicing, repair or correction.
++
++   In no event unless required by applicable law or agreed to in writing
++   will any copyright holder, or any other party who may modify and/or
++   redistribute the program as permitted above, be liable to you for
++   damages, including any general, special, incidental or consequential
++   damages arising out of the use or inability to use the program
++   (including but not limited to loss of data or data being rendered
++   inaccurate or losses sustained by you or third parties or a failure of
++   the program to operate with any other programs), even if such holder or
++   other party has been advised of the possibility of such damages.
++******************************************************************************/
++
++
++/*
++ * ####################################
++ *              Definition
++ * ####################################
++ */
++
++/*
++ *  Available Timer/Counter Index
++ */
++#define TIMER(n, X)                     (n * 2 + (X ? 1 : 0))
++#define TIMER_ANY                       0x00
++#define TIMER1A                         TIMER(1, 0)
++#define TIMER1B                         TIMER(1, 1)
++#define TIMER2A                         TIMER(2, 0)
++#define TIMER2B                         TIMER(2, 1)
++#define TIMER3A                         TIMER(3, 0)
++#define TIMER3B                         TIMER(3, 1)
++
++/*
++ *  Flag of Timer/Counter
++ *  These flags specify the way in which timer is configured.
++ */
++/*  Bit size of timer/counter.                      */
++#define TIMER_FLAG_16BIT                0x0000
++#define TIMER_FLAG_32BIT                0x0001
++/*  Switch between timer and counter.               */
++#define TIMER_FLAG_TIMER                0x0000
++#define TIMER_FLAG_COUNTER              0x0002
++/*  Stop or continue when overflowing/underflowing. */
++#define TIMER_FLAG_ONCE                 0x0000
++#define TIMER_FLAG_CYCLIC               0x0004
++/*  Count up or counter down.                       */
++#define TIMER_FLAG_UP                   0x0000
++#define TIMER_FLAG_DOWN                 0x0008
++/*  Count on specific level or edge.                */
++#define TIMER_FLAG_HIGH_LEVEL_SENSITIVE 0x0000
++#define TIMER_FLAG_LOW_LEVEL_SENSITIVE  0x0040
++#define TIMER_FLAG_RISE_EDGE            0x0010
++#define TIMER_FLAG_FALL_EDGE            0x0020
++#define TIMER_FLAG_ANY_EDGE             0x0030
++/*  Signal is syncronous to module clock or not.    */
++#define TIMER_FLAG_UNSYNC               0x0000
++#define TIMER_FLAG_SYNC                 0x0080
++/*  Different interrupt handle type.                */
++#define TIMER_FLAG_NO_HANDLE            0x0000
++#if defined(__KERNEL__)
++    #define TIMER_FLAG_CALLBACK_IN_IRQ  0x0100
++#endif  //  defined(__KERNEL__)
++#define TIMER_FLAG_SIGNAL               0x0300
++/*  Internal clock source or external clock source  */
++#define TIMER_FLAG_INT_SRC              0x0000
++#define TIMER_FLAG_EXT_SRC              0x1000
++
++
++/*
++ *  ioctl Command
++ */
++#define GPTU_REQUEST_TIMER              0x01    /*  General method to setup timer/counter.  */
++#define GPTU_FREE_TIMER                 0x02    /*  Free timer/counter.                     */
++#define GPTU_START_TIMER                0x03    /*  Start or resume timer/counter.          */
++#define GPTU_STOP_TIMER                 0x04    /*  Suspend timer/counter.                  */
++#define GPTU_GET_COUNT_VALUE            0x05    /*  Get current count value.                */
++#define GPTU_CALCULATE_DIVIDER          0x06    /*  Calculate timer divider from given freq.*/
++#define GPTU_SET_TIMER                  0x07    /*  Simplified method to setup timer.       */
++#define GPTU_SET_COUNTER                0x08    /*  Simplified method to setup counter.     */
++
++/*
++ *  Data Type Used to Call ioctl
++ */
++struct gptu_ioctl_param {
++    unsigned int                        timer;  /*  In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and  *
++                                                 *  GPTU_SET_COUNTER, this field is ID of expected      *
++                                                 *  timer/counter. If it's zero, a timer/counter would  *
++                                                 *  be dynamically allocated and ID would be stored in  *
++                                                 *  this field.                                         *
++                                                 *  In command GPTU_GET_COUNT_VALUE, this field is      *
++                                                 *  ignored.                                            *
++                                                 *  In other command, this field is ID of timer/counter *
++                                                 *  allocated.                                          */
++    unsigned int                        flag;   /*  In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and  *
++                                                 *  GPTU_SET_COUNTER, this field contains flags to      *
++                                                 *  specify how to configure timer/counter.             *
++                                                 *  In command GPTU_START_TIMER, zero indicate start    *
++                                                 *  and non-zero indicate resume timer/counter.         *
++                                                 *  In other command, this field is ignored.            */
++    unsigned long                       value;  /*  In command GPTU_REQUEST_TIMER, this field contains  *
++                                                 *  init/reload value.                                  *
++                                                 *  In command GPTU_SET_TIMER, this field contains      *
++                                                 *  frequency (0.001Hz) of timer.                       *
++                                                 *  In command GPTU_GET_COUNT_VALUE, current count      *
++                                                 *  value would be stored in this field.                *
++                                                 *  In command GPTU_CALCULATE_DIVIDER, this field       *
++                                                 *  contains frequency wanted, and after calculation,   *
++                                                 *  divider would be stored in this field to overwrite  *
++                                                 *  the frequency.                                      *
++                                                 *  In other command, this field is ignored.            */
++    int                                 pid;    /*  In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER,   *
++                                                 *  if signal is required, this field contains process  *
++                                                 *  ID to which signal would be sent.                   *
++                                                 *  In other command, this field is ignored.            */
++    int                                 sig;    /*  In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER,   *
++                                                 *  if signal is required, this field contains signal   *
++                                                 *  number which would be sent.                         *
++                                                 *  In other command, this field is ignored.            */
++};
++
++/*
++ * ####################################
++ *              Data Type
++ * ####################################
++ */
++typedef void (*timer_callback)(unsigned long arg);
++
++extern int lq_request_timer(unsigned int, unsigned int, unsigned long, unsigned long, unsigned long);
++extern int lq_free_timer(unsigned int);
++extern int lq_start_timer(unsigned int, int);
++extern int lq_stop_timer(unsigned int);
++extern int lq_reset_counter_flags(u32 timer, u32 flags);
++extern int lq_get_count_value(unsigned int, unsigned long *);
++extern u32 lq_cal_divider(unsigned long);
++extern int lq_set_timer(unsigned int, unsigned int, int, int, unsigned int, unsigned long, unsigned long);
++extern int lq_set_counter(unsigned int timer, unsigned int flag,
++	u32 reload, unsigned long arg1, unsigned long arg2);
++
++#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */
+diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
+index 277aa34..4c3106f 100644
+--- a/arch/mips/lantiq/xway/Makefile
++++ b/arch/mips/lantiq/xway/Makefile
+@@ -1,4 +1,4 @@
+-obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o prom.o nand.o
++obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o prom.o nand.o timer.o
+ 
+ obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
+ obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
+diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
+index 38f02f9..1a2e2d4 100644
+--- a/arch/mips/lantiq/xway/sysctrl.c
++++ b/arch/mips/lantiq/xway/sysctrl.c
+@@ -147,6 +147,7 @@ void __init ltq_soc_init(void)
+ 	clkdev_add_pmu("ltq_dma", NULL, 0, PMU_DMA);
+ 	clkdev_add_pmu("ltq_stp", NULL, 0, PMU_STP);
+ 	clkdev_add_pmu("ltq_spi", NULL, 0, PMU_SPI);
++        clkdev_add_pmu("ltq_gptu", NULL, 0, PMU_GPT);
+ 	if (!ltq_is_vr9())
+ 		clkdev_add_pmu("ltq_etop", NULL, 0, PMU_PPE);
+ 	if (ltq_is_ase()) {
+diff --git a/arch/mips/lantiq/xway/timer.c b/arch/mips/lantiq/xway/timer.c
+new file mode 100644
+index 0000000..9794c87
+--- /dev/null
++++ b/arch/mips/lantiq/xway/timer.c
+@@ -0,0 +1,846 @@
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/version.h>
++#include <linux/types.h>
++#include <linux/fs.h>
++#include <linux/miscdevice.h>
++#include <linux/init.h>
++#include <linux/uaccess.h>
++#include <linux/unistd.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/sched.h>
++
++#include <asm/irq.h>
++#include <asm/div64.h>
++#include "../clk.h"
++
++#include <lantiq_soc.h>
++#include <lantiq_irq.h>
++#include <lantiq_timer.h>
++
++#define MAX_NUM_OF_32BIT_TIMER_BLOCKS	6
++
++#ifdef TIMER1A
++#define FIRST_TIMER			TIMER1A
++#else
++#define FIRST_TIMER			2
++#endif
++
++/*
++ *  GPTC divider is set or not.
++ */
++#define GPTU_CLC_RMC_IS_SET		0
++
++/*
++ *  Timer Interrupt (IRQ)
++ */
++/*  Must be adjusted when ICU driver is available */
++#define TIMER_INTERRUPT			(INT_NUM_IM3_IRL0 + 22)
++
++/*
++ *  Bits Operation
++ */
++#define GET_BITS(x, msb, lsb)		\
++	(((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
++#define SET_BITS(x, msb, lsb, value)	\
++	(((x) & ~(((1 << ((msb) + 1)) - 1) ^ ((1 << (lsb)) - 1))) | \
++	(((value) & ((1 << (1 + (msb) - (lsb))) - 1)) << (lsb)))
++
++/*
++ *  GPTU Register Mapping
++ */
++#define LQ_GPTU			(KSEG1 + 0x1E100A00)
++#define LQ_GPTU_CLC		((volatile u32 *)(LQ_GPTU + 0x0000))
++#define LQ_GPTU_ID			((volatile u32 *)(LQ_GPTU + 0x0008))
++#define LQ_GPTU_CON(n, X)		((volatile u32 *)(LQ_GPTU + 0x0010 + ((X) * 4) + ((n) - 1) * 0x0020))	/* X must be either A or B */
++#define LQ_GPTU_RUN(n, X)		((volatile u32 *)(LQ_GPTU + 0x0018 + ((X) * 4) + ((n) - 1) * 0x0020))	/* X must be either A or B */
++#define LQ_GPTU_RELOAD(n, X)	((volatile u32 *)(LQ_GPTU + 0x0020 + ((X) * 4) + ((n) - 1) * 0x0020))	/* X must be either A or B */
++#define LQ_GPTU_COUNT(n, X)	((volatile u32 *)(LQ_GPTU + 0x0028 + ((X) * 4) + ((n) - 1) * 0x0020))	/* X must be either A or B */
++#define LQ_GPTU_IRNEN		((volatile u32 *)(LQ_GPTU + 0x00F4))
++#define LQ_GPTU_IRNICR		((volatile u32 *)(LQ_GPTU + 0x00F8))
++#define LQ_GPTU_IRNCR		((volatile u32 *)(LQ_GPTU + 0x00FC))
++
++/*
++ *  Clock Control Register
++ */
++#define GPTU_CLC_SMC			GET_BITS(*LQ_GPTU_CLC, 23, 16)
++#define GPTU_CLC_RMC			GET_BITS(*LQ_GPTU_CLC, 15, 8)
++#define GPTU_CLC_FSOE			(*LQ_GPTU_CLC & (1 << 5))
++#define GPTU_CLC_EDIS			(*LQ_GPTU_CLC & (1 << 3))
++#define GPTU_CLC_SPEN			(*LQ_GPTU_CLC & (1 << 2))
++#define GPTU_CLC_DISS			(*LQ_GPTU_CLC & (1 << 1))
++#define GPTU_CLC_DISR			(*LQ_GPTU_CLC & (1 << 0))
++
++#define GPTU_CLC_SMC_SET(value)		SET_BITS(0, 23, 16, (value))
++#define GPTU_CLC_RMC_SET(value)		SET_BITS(0, 15, 8, (value))
++#define GPTU_CLC_FSOE_SET(value)	((value) ? (1 << 5) : 0)
++#define GPTU_CLC_SBWE_SET(value)	((value) ? (1 << 4) : 0)
++#define GPTU_CLC_EDIS_SET(value)	((value) ? (1 << 3) : 0)
++#define GPTU_CLC_SPEN_SET(value)	((value) ? (1 << 2) : 0)
++#define GPTU_CLC_DISR_SET(value)	((value) ? (1 << 0) : 0)
++
++/*
++ *  ID Register
++ */
++#define GPTU_ID_ID			GET_BITS(*LQ_GPTU_ID, 15, 8)
++#define GPTU_ID_CFG			GET_BITS(*LQ_GPTU_ID, 7, 5)
++#define GPTU_ID_REV			GET_BITS(*LQ_GPTU_ID, 4, 0)
++
++/*
++ *  Control Register of Timer/Counter nX
++ *    n is the index of block (1 based index)
++ *    X is either A or B
++ */
++#define GPTU_CON_SRC_EG(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 10))
++#define GPTU_CON_SRC_EXT(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 9))
++#define GPTU_CON_SYNC(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 8))
++#define GPTU_CON_EDGE(n, X)		GET_BITS(*LQ_GPTU_CON(n, X), 7, 6)
++#define GPTU_CON_INV(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 5))
++#define GPTU_CON_EXT(n, X)		(*LQ_GPTU_CON(n, A) & (1 << 4))	/* Timer/Counter B does not have this bit */
++#define GPTU_CON_STP(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 3))
++#define GPTU_CON_CNT(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 2))
++#define GPTU_CON_DIR(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 1))
++#define GPTU_CON_EN(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 0))
++
++#define GPTU_CON_SRC_EG_SET(value)	((value) ? 0 : (1 << 10))
++#define GPTU_CON_SRC_EXT_SET(value)	((value) ? (1 << 9) : 0)
++#define GPTU_CON_SYNC_SET(value)	((value) ? (1 << 8) : 0)
++#define GPTU_CON_EDGE_SET(value)	SET_BITS(0, 7, 6, (value))
++#define GPTU_CON_INV_SET(value)		((value) ? (1 << 5) : 0)
++#define GPTU_CON_EXT_SET(value)		((value) ? (1 << 4) : 0)
++#define GPTU_CON_STP_SET(value)		((value) ? (1 << 3) : 0)
++#define GPTU_CON_CNT_SET(value)		((value) ? (1 << 2) : 0)
++#define GPTU_CON_DIR_SET(value)		((value) ? (1 << 1) : 0)
++
++#define GPTU_RUN_RL_SET(value)		((value) ? (1 << 2) : 0)
++#define GPTU_RUN_CEN_SET(value)		((value) ? (1 << 1) : 0)
++#define GPTU_RUN_SEN_SET(value)		((value) ? (1 << 0) : 0)
++
++#define GPTU_IRNEN_TC_SET(n, X, value)	((value) ? (1 << (((n) - 1) * 2 + (X))) : 0)
++#define GPTU_IRNCR_TC_SET(n, X, value)	((value) ? (1 << (((n) - 1) * 2 + (X))) : 0)
++
++#define TIMER_FLAG_MASK_SIZE(x)		(x & 0x0001)
++#define TIMER_FLAG_MASK_TYPE(x)		(x & 0x0002)
++#define TIMER_FLAG_MASK_STOP(x)		(x & 0x0004)
++#define TIMER_FLAG_MASK_DIR(x)		(x & 0x0008)
++#define TIMER_FLAG_NONE_EDGE		0x0000
++#define TIMER_FLAG_MASK_EDGE(x)		(x & 0x0030)
++#define TIMER_FLAG_REAL			0x0000
++#define TIMER_FLAG_INVERT		0x0040
++#define TIMER_FLAG_MASK_INVERT(x)	(x & 0x0040)
++#define TIMER_FLAG_MASK_TRIGGER(x)	(x & 0x0070)
++#define TIMER_FLAG_MASK_SYNC(x)		(x & 0x0080)
++#define TIMER_FLAG_CALLBACK_IN_HB	0x0200
++#define TIMER_FLAG_MASK_HANDLE(x)	(x & 0x0300)
++#define TIMER_FLAG_MASK_SRC(x)		(x & 0x1000)
++
++struct timer_dev_timer {
++	unsigned int f_irq_on;
++	unsigned int irq;
++	unsigned int flag;
++	unsigned long arg1;
++	unsigned long arg2;
++};
++
++struct timer_dev {
++	struct mutex gptu_mutex;
++	unsigned int number_of_timers;
++	unsigned int occupation;
++	unsigned int f_gptu_on;
++	struct timer_dev_timer timer[MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2];
++};
++
++unsigned long ltq_danube_fpi_bus_clock(int fpi);
++unsigned long ltq_vr9_fpi_bus_clock(int fpi);
++
++unsigned int ltq_get_fpi_bus_clock(int fpi) {
++	if (ltq_is_ase())
++		return CLOCK_133M;
++	else if (ltq_is_vr9())
++		return ltq_vr9_fpi_bus_clock(fpi);
++
++	return ltq_danube_fpi_bus_clock(fpi);
++}
++
++
++static long gptu_ioctl(struct file *, unsigned int, unsigned long);
++static int gptu_open(struct inode *, struct file *);
++static int gptu_release(struct inode *, struct file *);
++
++static struct file_operations gptu_fops = {
++	.owner = THIS_MODULE,
++	.unlocked_ioctl = gptu_ioctl,
++	.open = gptu_open,
++	.release = gptu_release
++};
++
++static struct miscdevice gptu_miscdev = {
++	.minor = MISC_DYNAMIC_MINOR,
++	.name = "gptu",
++	.fops = &gptu_fops,
++};
++
++static struct timer_dev timer_dev;
++
++static irqreturn_t timer_irq_handler(int irq, void *p)
++{
++	unsigned int timer;
++	unsigned int flag;
++	struct timer_dev_timer *dev_timer = (struct timer_dev_timer *)p;
++
++	timer = irq - TIMER_INTERRUPT;
++	if (timer < timer_dev.number_of_timers
++		&& dev_timer == &timer_dev.timer[timer]) {
++		/*  Clear interrupt.    */
++		ltq_w32(1 << timer, LQ_GPTU_IRNCR);
++
++		/*  Call user hanler or signal. */
++		flag = dev_timer->flag;
++		if (!(timer & 0x01)
++			|| TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) {
++			/* 16-bit timer or timer A of 32-bit timer  */
++			switch (TIMER_FLAG_MASK_HANDLE(flag)) {
++			case TIMER_FLAG_CALLBACK_IN_IRQ:
++			case TIMER_FLAG_CALLBACK_IN_HB:
++				if (dev_timer->arg1)
++					(*(timer_callback)dev_timer->arg1)(dev_timer->arg2);
++				break;
++			case TIMER_FLAG_SIGNAL:
++				send_sig((int)dev_timer->arg2, (struct task_struct *)dev_timer->arg1, 0);
++				break;
++			}
++		}
++	}
++	return IRQ_HANDLED;
++}
++
++static inline void lq_enable_gptu(void)
++{
++	struct clk *clk = clk_get_sys("ltq_gptu", NULL);
++	clk_enable(clk);
++
++	//ltq_pmu_enable(PMU_GPT);
++
++	/*  Set divider as 1, disable write protection for SPEN, enable module. */
++	*LQ_GPTU_CLC =
++		GPTU_CLC_SMC_SET(0x00) |
++		GPTU_CLC_RMC_SET(0x01) |
++		GPTU_CLC_FSOE_SET(0) |
++		GPTU_CLC_SBWE_SET(1) |
++		GPTU_CLC_EDIS_SET(0) |
++		GPTU_CLC_SPEN_SET(0) |
++		GPTU_CLC_DISR_SET(0);
++}
++
++static inline void lq_disable_gptu(void)
++{
++	struct clk *clk = clk_get_sys("ltq_gptu", NULL);
++	ltq_w32(0x00, LQ_GPTU_IRNEN);
++	ltq_w32(0xfff, LQ_GPTU_IRNCR);
++
++	/*  Set divider as 0, enable write protection for SPEN, disable module. */
++	*LQ_GPTU_CLC =
++		GPTU_CLC_SMC_SET(0x00) |
++		GPTU_CLC_RMC_SET(0x00) |
++		GPTU_CLC_FSOE_SET(0) |
++		GPTU_CLC_SBWE_SET(0) |
++		GPTU_CLC_EDIS_SET(0) |
++		GPTU_CLC_SPEN_SET(0) |
++		GPTU_CLC_DISR_SET(1);
++
++	clk_enable(clk);
++}
++
++int lq_request_timer(unsigned int timer, unsigned int flag,
++	unsigned long value, unsigned long arg1, unsigned long arg2)
++{
++	int ret = 0;
++	unsigned int con_reg, irnen_reg;
++	int n, X;
++
++	if (timer >= FIRST_TIMER + timer_dev.number_of_timers)
++		return -EINVAL;
++
++	printk(KERN_INFO "request_timer(%d, 0x%08X, %lu)...",
++		timer, flag, value);
++
++	if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT)
++		value &= 0xFFFF;
++	else
++		timer &= ~0x01;
++
++	mutex_lock(&timer_dev.gptu_mutex);
++
++	/*
++	 *  Allocate timer.
++	 */
++	if (timer < FIRST_TIMER) {
++		unsigned int mask;
++		unsigned int shift;
++		/* This takes care of TIMER1B which is the only choice for Voice TAPI system */
++		unsigned int offset = TIMER2A;
++
++		/*
++		 *  Pick up a free timer.
++		 */
++		if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) {
++			mask = 1 << offset;
++			shift = 1;
++		} else {
++			mask = 3 << offset;
++			shift = 2;
++		}
++		for (timer = offset;
++		     timer < offset + timer_dev.number_of_timers;
++		     timer += shift, mask <<= shift)
++			if (!(timer_dev.occupation & mask)) {
++				timer_dev.occupation |= mask;
++				break;
++			}
++		if (timer >= offset + timer_dev.number_of_timers) {
++			printk("failed![%d]\n", __LINE__);
++			mutex_unlock(&timer_dev.gptu_mutex);
++			return -EINVAL;
++		} else
++			ret = timer;
++	} else {
++		register unsigned int mask;
++
++		/*
++		 *  Check if the requested timer is free.
++		 */
++		mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
++		if ((timer_dev.occupation & mask)) {
++			printk("failed![%d] mask %#x, timer_dev.occupation %#x\n",
++				__LINE__, mask, timer_dev.occupation);
++			mutex_unlock(&timer_dev.gptu_mutex);
++			return -EBUSY;
++		} else {
++			timer_dev.occupation |= mask;
++			ret = 0;
++		}
++	}
++
++	/*
++	 *  Prepare control register value.
++	 */
++	switch (TIMER_FLAG_MASK_EDGE(flag)) {
++	default:
++	case TIMER_FLAG_NONE_EDGE:
++		con_reg = GPTU_CON_EDGE_SET(0x00);
++		break;
++	case TIMER_FLAG_RISE_EDGE:
++		con_reg = GPTU_CON_EDGE_SET(0x01);
++		break;
++	case TIMER_FLAG_FALL_EDGE:
++		con_reg = GPTU_CON_EDGE_SET(0x02);
++		break;
++	case TIMER_FLAG_ANY_EDGE:
++		con_reg = GPTU_CON_EDGE_SET(0x03);
++		break;
++	}
++	if (TIMER_FLAG_MASK_TYPE(flag) == TIMER_FLAG_TIMER)
++		con_reg |=
++			TIMER_FLAG_MASK_SRC(flag) ==
++			TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) :
++			GPTU_CON_SRC_EXT_SET(0);
++	else
++		con_reg |=
++			TIMER_FLAG_MASK_SRC(flag) ==
++			TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) :
++			GPTU_CON_SRC_EG_SET(0);
++	con_reg |=
++		TIMER_FLAG_MASK_SYNC(flag) ==
++		TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) :
++		GPTU_CON_SYNC_SET(1);
++	con_reg |=
++		TIMER_FLAG_MASK_INVERT(flag) ==
++		TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1);
++	con_reg |=
++		TIMER_FLAG_MASK_SIZE(flag) ==
++		TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) :
++		GPTU_CON_EXT_SET(1);
++	con_reg |=
++		TIMER_FLAG_MASK_STOP(flag) ==
++		TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0);
++	con_reg |=
++		TIMER_FLAG_MASK_TYPE(flag) ==
++		TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) :
++		GPTU_CON_CNT_SET(1);
++	con_reg |=
++		TIMER_FLAG_MASK_DIR(flag) ==
++		TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0);
++
++	/*
++	 *  Fill up running data.
++	 */
++	timer_dev.timer[timer - FIRST_TIMER].flag = flag;
++	timer_dev.timer[timer - FIRST_TIMER].arg1 = arg1;
++	timer_dev.timer[timer - FIRST_TIMER].arg2 = arg2;
++	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
++		timer_dev.timer[timer - FIRST_TIMER + 1].flag = flag;
++
++	/*
++	 *  Enable GPTU module.
++	 */
++	if (!timer_dev.f_gptu_on) {
++		lq_enable_gptu();
++		timer_dev.f_gptu_on = 1;
++	}
++
++	/*
++	 *  Enable IRQ.
++	 */
++	if (TIMER_FLAG_MASK_HANDLE(flag) != TIMER_FLAG_NO_HANDLE) {
++		if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL)
++			timer_dev.timer[timer - FIRST_TIMER].arg1 =
++				(unsigned long) find_task_by_vpid((int) arg1);
++
++		irnen_reg = 1 << (timer - FIRST_TIMER);
++
++		if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL
++		    || (TIMER_FLAG_MASK_HANDLE(flag) ==
++			TIMER_FLAG_CALLBACK_IN_IRQ
++			&& timer_dev.timer[timer - FIRST_TIMER].arg1)) {
++			enable_irq(timer_dev.timer[timer - FIRST_TIMER].irq);
++			timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 1;
++		}
++	} else
++		irnen_reg = 0;
++
++	/*
++	 *  Write config register, reload value and enable interrupt.
++	 */
++	n = timer >> 1;
++	X = timer & 0x01;
++	*LQ_GPTU_CON(n, X) = con_reg;
++	*LQ_GPTU_RELOAD(n, X) = value;
++	/* printk("reload value = %d\n", (u32)value); */
++	*LQ_GPTU_IRNEN |= irnen_reg;
++
++	mutex_unlock(&timer_dev.gptu_mutex);
++	printk("successful!\n");
++	return ret;
++}
++EXPORT_SYMBOL(lq_request_timer);
++
++int lq_free_timer(unsigned int timer)
++{
++	unsigned int flag;
++	unsigned int mask;
++	int n, X;
++
++	if (!timer_dev.f_gptu_on)
++		return -EINVAL;
++
++	if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
++		return -EINVAL;
++
++	mutex_lock(&timer_dev.gptu_mutex);
++
++	flag = timer_dev.timer[timer - FIRST_TIMER].flag;
++	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
++		timer &= ~0x01;
++
++	mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
++	if (((timer_dev.occupation & mask) ^ mask)) {
++		mutex_unlock(&timer_dev.gptu_mutex);
++		return -EINVAL;
++	}
++
++	n = timer >> 1;
++	X = timer & 0x01;
++
++	if (GPTU_CON_EN(n, X))
++		*LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1);
++
++	*LQ_GPTU_IRNEN &= ~GPTU_IRNEN_TC_SET(n, X, 1);
++	*LQ_GPTU_IRNCR |= GPTU_IRNCR_TC_SET(n, X, 1);
++
++	if (timer_dev.timer[timer - FIRST_TIMER].f_irq_on) {
++		disable_irq(timer_dev.timer[timer - FIRST_TIMER].irq);
++		timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 0;
++	}
++
++	timer_dev.occupation &= ~mask;
++	if (!timer_dev.occupation && timer_dev.f_gptu_on) {
++		lq_disable_gptu();
++		timer_dev.f_gptu_on = 0;
++	}
++
++	mutex_unlock(&timer_dev.gptu_mutex);
++
++	return 0;
++}
++EXPORT_SYMBOL(lq_free_timer);
++
++int lq_start_timer(unsigned int timer, int is_resume)
++{
++	unsigned int flag;
++	unsigned int mask;
++	int n, X;
++
++	if (!timer_dev.f_gptu_on)
++		return -EINVAL;
++
++	if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
++		return -EINVAL;
++
++	mutex_lock(&timer_dev.gptu_mutex);
++
++	flag = timer_dev.timer[timer - FIRST_TIMER].flag;
++	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
++		timer &= ~0x01;
++
++	mask = (TIMER_FLAG_MASK_SIZE(flag) ==
++	TIMER_FLAG_16BIT ? 1 : 3) << timer;
++	if (((timer_dev.occupation & mask) ^ mask)) {
++		mutex_unlock(&timer_dev.gptu_mutex);
++		return -EINVAL;
++	}
++
++	n = timer >> 1;
++	X = timer & 0x01;
++
++	*LQ_GPTU_RUN(n, X) = GPTU_RUN_RL_SET(!is_resume) | GPTU_RUN_SEN_SET(1);
++
++	mutex_unlock(&timer_dev.gptu_mutex);
++
++	return 0;
++}
++EXPORT_SYMBOL(lq_start_timer);
++
++int lq_stop_timer(unsigned int timer)
++{
++	unsigned int flag;
++	unsigned int mask;
++	int n, X;
++
++	if (!timer_dev.f_gptu_on)
++		return -EINVAL;
++
++	if (timer < FIRST_TIMER
++	    || timer >= FIRST_TIMER + timer_dev.number_of_timers)
++		return -EINVAL;
++
++	mutex_lock(&timer_dev.gptu_mutex);
++
++	flag = timer_dev.timer[timer - FIRST_TIMER].flag;
++	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
++		timer &= ~0x01;
++
++	mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
++	if (((timer_dev.occupation & mask) ^ mask)) {
++		mutex_unlock(&timer_dev.gptu_mutex);
++		return -EINVAL;
++	}
++
++	n = timer >> 1;
++	X = timer & 0x01;
++
++	*LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1);
++
++	mutex_unlock(&timer_dev.gptu_mutex);
++
++	return 0;
++}
++EXPORT_SYMBOL(lq_stop_timer);
++
++int lq_reset_counter_flags(u32 timer, u32 flags)
++{
++	unsigned int oflag;
++	unsigned int mask, con_reg;
++	int n, X;
++
++	if (!timer_dev.f_gptu_on)
++		return -EINVAL;
++
++	if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
++		return -EINVAL;
++
++	mutex_lock(&timer_dev.gptu_mutex);
++
++	oflag = timer_dev.timer[timer - FIRST_TIMER].flag;
++	if (TIMER_FLAG_MASK_SIZE(oflag) != TIMER_FLAG_16BIT)
++		timer &= ~0x01;
++
++	mask = (TIMER_FLAG_MASK_SIZE(oflag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
++	if (((timer_dev.occupation & mask) ^ mask)) {
++		mutex_unlock(&timer_dev.gptu_mutex);
++		return -EINVAL;
++	}
++
++	switch (TIMER_FLAG_MASK_EDGE(flags)) {
++	default:
++	case TIMER_FLAG_NONE_EDGE:
++		con_reg = GPTU_CON_EDGE_SET(0x00);
++		break;
++	case TIMER_FLAG_RISE_EDGE:
++		con_reg = GPTU_CON_EDGE_SET(0x01);
++		break;
++	case TIMER_FLAG_FALL_EDGE:
++		con_reg = GPTU_CON_EDGE_SET(0x02);
++		break;
++	case TIMER_FLAG_ANY_EDGE:
++		con_reg = GPTU_CON_EDGE_SET(0x03);
++		break;
++	}
++	if (TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER)
++		con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) : GPTU_CON_SRC_EXT_SET(0);
++	else
++		con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) : GPTU_CON_SRC_EG_SET(0);
++	con_reg |= TIMER_FLAG_MASK_SYNC(flags) == TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) : GPTU_CON_SYNC_SET(1);
++	con_reg |= TIMER_FLAG_MASK_INVERT(flags) == TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1);
++	con_reg |= TIMER_FLAG_MASK_SIZE(flags) == TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) : GPTU_CON_EXT_SET(1);
++	con_reg |= TIMER_FLAG_MASK_STOP(flags) == TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0);
++	con_reg |= TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) : GPTU_CON_CNT_SET(1);
++	con_reg |= TIMER_FLAG_MASK_DIR(flags) == TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0);
++
++	timer_dev.timer[timer - FIRST_TIMER].flag = flags;
++	if (TIMER_FLAG_MASK_SIZE(flags) != TIMER_FLAG_16BIT)
++		timer_dev.timer[timer - FIRST_TIMER + 1].flag = flags;
++
++	n = timer >> 1;
++	X = timer & 0x01;
++
++	*LQ_GPTU_CON(n, X) = con_reg;
++	smp_wmb();
++	printk(KERN_INFO "[%s]: counter%d oflags %#x, nflags %#x, GPTU_CON %#x\n", __func__, timer, oflag, flags, *LQ_GPTU_CON(n, X));
++	mutex_unlock(&timer_dev.gptu_mutex);
++	return 0;
++}
++EXPORT_SYMBOL(lq_reset_counter_flags);
++
++int lq_get_count_value(unsigned int timer, unsigned long *value)
++{
++	unsigned int flag;
++	unsigned int mask;
++	int n, X;
++
++	if (!timer_dev.f_gptu_on)
++		return -EINVAL;
++
++	if (timer < FIRST_TIMER
++	    || timer >= FIRST_TIMER + timer_dev.number_of_timers)
++		return -EINVAL;
++
++	mutex_lock(&timer_dev.gptu_mutex);
++
++	flag = timer_dev.timer[timer - FIRST_TIMER].flag;
++	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
++		timer &= ~0x01;
++
++	mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
++	if (((timer_dev.occupation & mask) ^ mask)) {
++		mutex_unlock(&timer_dev.gptu_mutex);
++		return -EINVAL;
++	}
++
++	n = timer >> 1;
++	X = timer & 0x01;
++
++	*value = *LQ_GPTU_COUNT(n, X);
++
++	mutex_unlock(&timer_dev.gptu_mutex);
++
++	return 0;
++}
++EXPORT_SYMBOL(lq_get_count_value);
++
++u32 lq_cal_divider(unsigned long freq)
++{
++	u64 module_freq, fpi = ltq_get_fpi_bus_clock(2);
++	u32 clock_divider = 1;
++	module_freq = fpi * 1000;
++	do_div(module_freq, clock_divider * freq);
++	return module_freq;
++}
++EXPORT_SYMBOL(lq_cal_divider);
++
++int lq_set_timer(unsigned int timer, unsigned int freq, int is_cyclic,
++	int is_ext_src, unsigned int handle_flag, unsigned long arg1,
++	unsigned long arg2)
++{
++	unsigned long divider;
++	unsigned int flag;
++
++	divider = lq_cal_divider(freq);
++	if (divider == 0)
++		return -EINVAL;
++	flag = ((divider & ~0xFFFF) ? TIMER_FLAG_32BIT : TIMER_FLAG_16BIT)
++		| (is_cyclic ? TIMER_FLAG_CYCLIC : TIMER_FLAG_ONCE)
++		| (is_ext_src ? TIMER_FLAG_EXT_SRC : TIMER_FLAG_INT_SRC)
++		| TIMER_FLAG_TIMER | TIMER_FLAG_DOWN
++		| TIMER_FLAG_MASK_HANDLE(handle_flag);
++
++	printk(KERN_INFO "lq_set_timer(%d, %d), divider = %lu\n",
++		timer, freq, divider);
++	return lq_request_timer(timer, flag, divider, arg1, arg2);
++}
++EXPORT_SYMBOL(lq_set_timer);
++
++int lq_set_counter(unsigned int timer, unsigned int flag, u32 reload,
++	unsigned long arg1, unsigned long arg2)
++{
++	printk(KERN_INFO "lq_set_counter(%d, %#x, %d)\n", timer, flag, reload);
++	return lq_request_timer(timer, flag, reload, arg1, arg2);
++}
++EXPORT_SYMBOL(lq_set_counter);
++
++static long gptu_ioctl(struct file *file, unsigned int cmd,
++	unsigned long arg)
++{
++	int ret;
++	struct gptu_ioctl_param param;
++
++	if (!access_ok(VERIFY_READ, arg, sizeof(struct gptu_ioctl_param)))
++		return -EFAULT;
++	copy_from_user(&param, (void *) arg, sizeof(param));
++
++	if ((((cmd == GPTU_REQUEST_TIMER || cmd == GPTU_SET_TIMER
++	       || GPTU_SET_COUNTER) && param.timer < 2)
++	     || cmd == GPTU_GET_COUNT_VALUE || cmd == GPTU_CALCULATE_DIVIDER)
++	    && !access_ok(VERIFY_WRITE, arg,
++			   sizeof(struct gptu_ioctl_param)))
++		return -EFAULT;
++
++	switch (cmd) {
++	case GPTU_REQUEST_TIMER:
++		ret = lq_request_timer(param.timer, param.flag, param.value,
++				     (unsigned long) param.pid,
++				     (unsigned long) param.sig);
++		if (ret > 0) {
++			copy_to_user(&((struct gptu_ioctl_param *) arg)->
++				      timer, &ret, sizeof(&ret));
++			ret = 0;
++		}
++		break;
++	case GPTU_FREE_TIMER:
++		ret = lq_free_timer(param.timer);
++		break;
++	case GPTU_START_TIMER:
++		ret = lq_start_timer(param.timer, param.flag);
++		break;
++	case GPTU_STOP_TIMER:
++		ret = lq_stop_timer(param.timer);
++		break;
++	case GPTU_GET_COUNT_VALUE:
++		ret = lq_get_count_value(param.timer, &param.value);
++		if (!ret)
++			copy_to_user(&((struct gptu_ioctl_param *) arg)->
++				      value, &param.value,
++				      sizeof(param.value));
++		break;
++	case GPTU_CALCULATE_DIVIDER:
++		param.value = lq_cal_divider(param.value);
++		if (param.value == 0)
++			ret = -EINVAL;
++		else {
++			copy_to_user(&((struct gptu_ioctl_param *) arg)->
++				      value, &param.value,
++				      sizeof(param.value));
++			ret = 0;
++		}
++		break;
++	case GPTU_SET_TIMER:
++		ret = lq_set_timer(param.timer, param.value,
++				 TIMER_FLAG_MASK_STOP(param.flag) !=
++				 TIMER_FLAG_ONCE ? 1 : 0,
++				 TIMER_FLAG_MASK_SRC(param.flag) ==
++				 TIMER_FLAG_EXT_SRC ? 1 : 0,
++				 TIMER_FLAG_MASK_HANDLE(param.flag) ==
++				 TIMER_FLAG_SIGNAL ? TIMER_FLAG_SIGNAL :
++				 TIMER_FLAG_NO_HANDLE,
++				 (unsigned long) param.pid,
++				 (unsigned long) param.sig);
++		if (ret > 0) {
++			copy_to_user(&((struct gptu_ioctl_param *) arg)->
++				      timer, &ret, sizeof(&ret));
++			ret = 0;
++		}
++		break;
++	case GPTU_SET_COUNTER:
++		lq_set_counter(param.timer, param.flag, param.value, 0, 0);
++		if (ret > 0) {
++			copy_to_user(&((struct gptu_ioctl_param *) arg)->
++				      timer, &ret, sizeof(&ret));
++			ret = 0;
++		}
++		break;
++	default:
++		ret = -ENOTTY;
++	}
++
++	return ret;
++}
++
++static int gptu_open(struct inode *inode, struct file *file)
++{
++	return 0;
++}
++
++static int gptu_release(struct inode *inode, struct file *file)
++{
++	return 0;
++}
++
++int __init lq_gptu_init(void)
++{
++	int ret;
++	unsigned int i;
++
++	ltq_w32(0, LQ_GPTU_IRNEN);
++	ltq_w32(0xfff, LQ_GPTU_IRNCR);
++
++	memset(&timer_dev, 0, sizeof(timer_dev));
++	mutex_init(&timer_dev.gptu_mutex);
++
++	lq_enable_gptu();
++	timer_dev.number_of_timers = GPTU_ID_CFG * 2;
++	lq_disable_gptu();
++	if (timer_dev.number_of_timers > MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2)
++		timer_dev.number_of_timers = MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2;
++	printk(KERN_INFO "gptu: totally %d 16-bit timers/counters\n", timer_dev.number_of_timers);
++
++	ret = misc_register(&gptu_miscdev);
++	if (ret) {
++		printk(KERN_ERR "gptu: can't misc_register, get error %d\n", -ret);
++		return ret;
++	} else {
++		printk(KERN_INFO "gptu: misc_register on minor %d\n", gptu_miscdev.minor);
++	}
++
++	for (i = 0; i < timer_dev.number_of_timers; i++) {
++		ret = request_irq(TIMER_INTERRUPT + i, timer_irq_handler, IRQF_TIMER, gptu_miscdev.name, &timer_dev.timer[i]);
++		if (ret) {
++			for (; i >= 0; i--)
++				free_irq(TIMER_INTERRUPT + i, &timer_dev.timer[i]);
++			misc_deregister(&gptu_miscdev);
++			printk(KERN_ERR "gptu: failed in requesting irq (%d), get error %d\n", i, -ret);
++			return ret;
++		} else {
++			timer_dev.timer[i].irq = TIMER_INTERRUPT + i;
++			disable_irq(timer_dev.timer[i].irq);
++			printk(KERN_INFO "gptu: succeeded to request irq %d\n", timer_dev.timer[i].irq);
++		}
++	}
++
++	return 0;
++}
++
++void __exit lq_gptu_exit(void)
++{
++	unsigned int i;
++
++	for (i = 0; i < timer_dev.number_of_timers; i++) {
++		if (timer_dev.timer[i].f_irq_on)
++			disable_irq(timer_dev.timer[i].irq);
++		free_irq(timer_dev.timer[i].irq, &timer_dev.timer[i]);
++	}
++	lq_disable_gptu();
++	misc_deregister(&gptu_miscdev);
++}
++
++module_init(lq_gptu_init);
++module_exit(lq_gptu_exit);
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0044-MIPS-lantiq-adds-dwc_otg.patch b/target/linux/lantiq/patches-3.3/0044-MIPS-lantiq-adds-dwc_otg.patch
new file mode 100644
index 0000000000..ef1c4ff128
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0044-MIPS-lantiq-adds-dwc_otg.patch
@@ -0,0 +1,15639 @@
+From 5bd209cb056fcf421710a1cd1521596a242bc569 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 30 Sep 2011 14:37:36 +0200
+Subject: [PATCH 44/70] MIPS: lantiq: adds dwc_otg
+
+---
+ drivers/usb/Kconfig                     |    2 +
+ drivers/usb/Makefile                    |    2 +
+ drivers/usb/core/hub.c                  |    4 +-
+ drivers/usb/dwc_otg/Kconfig             |   37 +
+ drivers/usb/dwc_otg/Makefile            |   39 +
+ drivers/usb/dwc_otg/dwc_otg_attr.c      |  802 ++++++++
+ drivers/usb/dwc_otg/dwc_otg_attr.h      |   67 +
+ drivers/usb/dwc_otg/dwc_otg_cil.c       | 3025 +++++++++++++++++++++++++++++++
+ drivers/usb/dwc_otg/dwc_otg_cil.h       |  911 ++++++++++
+ drivers/usb/dwc_otg/dwc_otg_cil_ifx.h   |   58 +
+ drivers/usb/dwc_otg/dwc_otg_cil_intr.c  |  708 ++++++++
+ drivers/usb/dwc_otg/dwc_otg_driver.c    | 1274 +++++++++++++
+ drivers/usb/dwc_otg/dwc_otg_driver.h    |   84 +
+ drivers/usb/dwc_otg/dwc_otg_hcd.c       | 2870 +++++++++++++++++++++++++++++
+ drivers/usb/dwc_otg/dwc_otg_hcd.h       |  676 +++++++
+ drivers/usb/dwc_otg/dwc_otg_hcd_intr.c  | 1841 +++++++++++++++++++
+ drivers/usb/dwc_otg/dwc_otg_hcd_queue.c |  794 ++++++++
+ drivers/usb/dwc_otg/dwc_otg_ifx.c       |  100 +
+ drivers/usb/dwc_otg/dwc_otg_ifx.h       |   85 +
+ drivers/usb/dwc_otg/dwc_otg_plat.h      |  269 +++
+ drivers/usb/dwc_otg/dwc_otg_regs.h      | 1797 ++++++++++++++++++
+ 21 files changed, 15443 insertions(+), 2 deletions(-)
+ create mode 100644 drivers/usb/dwc_otg/Kconfig
+ create mode 100644 drivers/usb/dwc_otg/Makefile
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_attr.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_attr.h
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_cil.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_cil.h
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_cil_ifx.h
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_cil_intr.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_driver.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_driver.h
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_hcd.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_hcd.h
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_hcd_queue.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_ifx.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_ifx.h
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_plat.h
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_regs.h
+
+diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
+index 75823a1..8469e23 100644
+--- a/drivers/usb/Kconfig
++++ b/drivers/usb/Kconfig
+@@ -130,6 +130,8 @@ source "drivers/usb/wusbcore/Kconfig"
+ 
+ source "drivers/usb/host/Kconfig"
+ 
++source "drivers/usb/dwc_otg/Kconfig"
++
+ source "drivers/usb/musb/Kconfig"
+ 
+ source "drivers/usb/renesas_usbhs/Kconfig"
+diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
+index 53a7bc0..d46b792 100644
+--- a/drivers/usb/Makefile
++++ b/drivers/usb/Makefile
+@@ -32,6 +32,8 @@ obj-$(CONFIG_USB_C67X00_HCD)	+= c67x00/
+ 
+ obj-$(CONFIG_USB_WUSB)		+= wusbcore/
+ 
++obj-$(CONFIG_DWC_OTG)           += dwc_otg/
++
+ obj-$(CONFIG_USB_ACM)		+= class/
+ obj-$(CONFIG_USB_PRINTER)	+= class/
+ obj-$(CONFIG_USB_WDM)		+= class/
+diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
+index 265c2f6..5d39022 100644
+--- a/drivers/usb/core/hub.c
++++ b/drivers/usb/core/hub.c
+@@ -2938,11 +2938,11 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
+ 		udev->ttport = hdev->ttport;
+ 	} else if (udev->speed != USB_SPEED_HIGH
+ 			&& hdev->speed == USB_SPEED_HIGH) {
+-		if (!hub->tt.hub) {
++/*		if (!hub->tt.hub) {
+ 			dev_err(&udev->dev, "parent hub has no TT\n");
+ 			retval = -EINVAL;
+ 			goto fail;
+-		}
++		}*/
+ 		udev->tt = &hub->tt;
+ 		udev->ttport = port1;
+ 	}
+diff --git a/drivers/usb/dwc_otg/Kconfig b/drivers/usb/dwc_otg/Kconfig
+new file mode 100644
+index 0000000..e018490
+--- /dev/null
++++ b/drivers/usb/dwc_otg/Kconfig
+@@ -0,0 +1,37 @@
++config DWC_OTG
++        tristate "Synopsis DWC_OTG support"
++        depends on USB
++        help
++          This driver supports Synopsis DWC_OTG IP core
++		  embebbed on many SOCs (ralink, infineon, etc)
++
++choice
++        prompt "USB Operation Mode"
++        depends on DWC_OTG
++        default DWC_OTG_HOST_ONLY
++
++config DWC_OTG_HOST_ONLY
++        bool "HOST ONLY MODE"
++        depends on DWC_OTG
++
++#config DWC_OTG_DEVICE_ONLY
++#        bool "DEVICE ONLY MODE"
++#        depends on DWC_OTG
++endchoice
++
++choice
++        prompt "Platform"
++        depends on DWC_OTG
++        default DWC_OTG_LANTIQ
++
++config DWC_OTG_LANTIQ
++        bool "Lantiq"
++        depends on LANTIQ
++        help
++          Danube USB Host Controller
++		  platform support
++endchoice
++
++config DWC_OTG_DEBUG
++        bool "Enable debug mode"
++        depends on DWC_OTG
+diff --git a/drivers/usb/dwc_otg/Makefile b/drivers/usb/dwc_otg/Makefile
+new file mode 100644
+index 0000000..d4d2355
+--- /dev/null
++++ b/drivers/usb/dwc_otg/Makefile
+@@ -0,0 +1,39 @@
++#
++# Makefile for DWC_otg Highspeed USB controller driver
++#
++
++ifeq ($(CONFIG_DWC_OTG_DEBUG),y)
++EXTRA_CFLAGS   += -DDEBUG
++endif
++
++# Use one of the following flags to compile the software in host-only or
++# device-only mode based on the configuration selected by the user
++ifeq ($(CONFIG_DWC_OTG_HOST_ONLY),y)
++	EXTRA_CFLAGS   += -DDWC_OTG_HOST_ONLY -DDWC_HOST_ONLY
++	EXTRA_CFLAGS   += -DDWC_OTG_EN_ISOC -DDWC_EN_ISOC
++else ifeq ($(CONFIG_DWC_OTG_DEVICE_ONLY),y)
++	EXTRA_CFLAGS   += -DDWC_OTG_DEVICE_ONLY
++else
++	EXTRA_CFLAGS   += -DDWC_OTG_MODE
++endif
++
++#	EXTRA_CFLAGS += -DDWC_HS_ELECT_TST
++#	EXTRA_CFLAGS    += -DDWC_OTG_EXT_CHG_PUMP
++
++ifeq ($(CONFIG_DWC_OTG_LANTIQ),y)
++     EXTRA_CFLAGS += -Dlinux -D__LINUX__ -DDWC_OTG_IFX -DDWC_OTG_HOST_ONLY -DDWC_HOST_ONLY  -D__KERNEL__ 
++endif
++ifeq ($(CONFIG_DWC_OTG_LANTIQ),m)
++     EXTRA_CFLAGS += -Dlinux -D__LINUX__ -DDWC_OTG_IFX -DDWC_HOST_ONLY -DMODULE -D__KERNEL__  -DDEBUG
++endif
++
++obj-$(CONFIG_DWC_OTG)	:= dwc_otg.o
++dwc_otg-objs    := dwc_otg_hcd.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o
++#dwc_otg-objs	+= dwc_otg_pcd.o dwc_otg_pcd_intr.o 
++dwc_otg-objs    += dwc_otg_attr.o 
++dwc_otg-objs    += dwc_otg_cil.o dwc_otg_cil_intr.o
++dwc_otg-objs	+= dwc_otg_ifx.o
++dwc_otg-objs    += dwc_otg_driver.o
++
++#obj-$(CONFIG_DWC_OTG_IFX)	:= dwc_otg_ifx.o
++#dwc_otg_ifx-objs		:= dwc_otg_ifx.o
+diff --git a/drivers/usb/dwc_otg/dwc_otg_attr.c b/drivers/usb/dwc_otg/dwc_otg_attr.c
+new file mode 100644
+index 0000000..4675a5c
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_attr.c
+@@ -0,0 +1,802 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_attr.c $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 537387 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file 
++ *
++ * The diagnostic interface will provide access to the controller for
++ * bringing up the hardware and testing.  The Linux driver attributes
++ * feature will be used to provide the Linux Diagnostic
++ * Interface. These attributes are accessed through sysfs.
++ */
++
++/** @page "Linux Module Attributes" 
++ *
++ * The Linux module attributes feature is used to provide the Linux
++ * Diagnostic Interface.  These attributes are accessed through sysfs.
++ * The diagnostic interface will provide access to the controller for
++ * bringing up the hardware and testing.
++
++
++ The following table shows the attributes.
++ <table>
++ <tr>
++ <td><b> Name</b></td>
++ <td><b> Description</b></td>
++ <td><b> Access</b></td>
++ </tr>
++ 
++ <tr>
++ <td> mode </td>
++ <td> Returns the current mode: 0 for device mode, 1 for host mode</td>
++ <td> Read</td>
++ </tr>
++ 
++ <tr>
++ <td> hnpcapable </td>
++ <td> Gets or sets the "HNP-capable" bit in the Core USB Configuraton Register.
++ Read returns the current value.</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> srpcapable </td>
++ <td> Gets or sets the "SRP-capable" bit in the Core USB Configuraton Register.
++ Read returns the current value.</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> hnp </td>
++ <td> Initiates the Host Negotiation Protocol.  Read returns the status.</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> srp </td>
++ <td> Initiates the Session Request Protocol.  Read returns the status.</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> buspower </td>
++ <td> Gets or sets the Power State of the bus (0 - Off or 1 - On)</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> bussuspend </td>
++ <td> Suspends the USB bus.</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> busconnected </td>
++ <td> Gets the connection status of the bus</td>
++ <td> Read</td>
++ </tr>
++ 
++ <tr>
++ <td> gotgctl </td>
++ <td> Gets or sets the Core Control Status Register.</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> gusbcfg </td>
++ <td> Gets or sets the Core USB Configuration Register</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> grxfsiz </td>
++ <td> Gets or sets the Receive FIFO Size Register</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> gnptxfsiz </td>
++ <td> Gets or sets the non-periodic Transmit Size Register</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> gpvndctl </td>
++ <td> Gets or sets the PHY Vendor Control Register</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> ggpio </td>
++ <td> Gets the value in the lower 16-bits of the General Purpose IO Register
++ or sets the upper 16 bits.</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> guid </td>
++ <td> Gets or sets the value of the User ID Register</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> gsnpsid </td>
++ <td> Gets the value of the Synopsys ID Regester</td>
++ <td> Read</td>
++ </tr>
++ 
++ <tr>
++ <td> devspeed </td>
++ <td> Gets or sets the device speed setting in the DCFG register</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> enumspeed </td>
++ <td> Gets the device enumeration Speed.</td>
++ <td> Read</td>
++ </tr>
++ 
++ <tr>
++ <td> hptxfsiz </td>
++ <td> Gets the value of the Host Periodic Transmit FIFO</td>
++ <td> Read</td>
++ </tr>
++ 
++ <tr>
++ <td> hprt0 </td>
++ <td> Gets or sets the value in the Host Port Control and Status Register</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> regoffset </td>
++ <td> Sets the register offset for the next Register Access</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> regvalue </td>
++ <td> Gets or sets the value of the register at the offset in the regoffset attribute.</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> remote_wakeup </td>
++ <td> On read, shows the status of Remote Wakeup. On write, initiates a remote
++ wakeup of the host. When bit 0 is 1 and Remote Wakeup is enabled, the Remote
++ Wakeup signalling bit in the Device Control Register is set for 1
++ milli-second.</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> regdump </td>
++ <td> Dumps the contents of core registers.</td>
++ <td> Read</td>
++ </tr>
++ 
++ <tr>
++ <td> hcddump </td>
++ <td> Dumps the current HCD state.</td>
++ <td> Read</td>
++ </tr>
++ 
++ <tr>
++ <td> hcd_frrem </td>
++ <td> Shows the average value of the Frame Remaining
++ field in the Host Frame Number/Frame Remaining register when an SOF interrupt
++ occurs. This can be used to determine the average interrupt latency. Also
++ shows the average Frame Remaining value for start_transfer and the "a" and
++ "b" sample points. The "a" and "b" sample points may be used during debugging
++ bto determine how long it takes to execute a section of the HCD code.</td>
++ <td> Read</td>
++ </tr>
++ 
++ <tr>
++ <td> rd_reg_test </td>
++ <td> Displays the time required to read the GNPTXFSIZ register many times
++ (the output shows the number of times the register is read).
++ <td> Read</td>
++ </tr>
++ 
++ <tr>
++ <td> wr_reg_test </td>
++ <td> Displays the time required to write the GNPTXFSIZ register many times
++ (the output shows the number of times the register is written).
++ <td> Read</td>
++ </tr>
++ 
++ </table>
++ 
++ Example usage:
++ To get the current mode:
++ cat /sys/devices/lm0/mode
++ 
++ To power down the USB:
++ echo 0 > /sys/devices/lm0/buspower
++ */
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/errno.h>
++#include <linux/types.h>
++#include <linux/stat.h>  /* permission constants */
++
++#include <asm/io.h>
++
++#include "dwc_otg_plat.h"
++#include "dwc_otg_attr.h"
++#include "dwc_otg_driver.h"
++// #include "dwc_otg_pcd.h"
++#include "dwc_otg_hcd.h"
++
++// 20070316, winder added.
++#ifndef SZ_256K
++#define SZ_256K                         0x00040000
++#endif
++
++/*
++ * MACROs for defining sysfs attribute
++ */
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
++	uint32_t val; \
++	val = dwc_read_reg32 (_addr_); \
++	val = (val & (_mask_)) >> _shift_; \
++	return sprintf (buf, "%s = 0x%x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, const char *buf, size_t count) \
++{ \
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
++	uint32_t set = simple_strtoul(buf, NULL, 16); \
++	uint32_t clear = set; \
++	clear = ((~clear) << _shift_) & _mask_; \
++	set = (set << _shift_) & _mask_; \
++	dev_dbg(_dev, "Storing Address=0x%08x Set=0x%08x Clear=0x%08x\n", (uint32_t)_addr_, set, clear); \
++	dwc_modify_reg32(_addr_, clear, set); \
++	return count; \
++}
++
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_RW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
++
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_RO(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
++
++/*
++ * MACROs for defining sysfs attribute for 32-bit registers
++ */
++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
++	uint32_t val; \
++	val = dwc_read_reg32 (_addr_); \
++	return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, const char *buf, size_t count) \
++{ \
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
++	uint32_t val = simple_strtoul(buf, NULL, 16); \
++	dev_dbg(_dev, "Storing Address=0x%08x Val=0x%08x\n", (uint32_t)_addr_, val); \
++	dwc_write_reg32(_addr_, val); \
++	return count; \
++}
++
++#define DWC_OTG_DEVICE_ATTR_REG32_RW(_otg_attr_name_,_addr_,_string_) \
++DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
++DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
++
++#define DWC_OTG_DEVICE_ATTR_REG32_RO(_otg_attr_name_,_addr_,_string_) \
++DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
++
++
++/** @name Functions for Show/Store of Attributes */
++/**@{*/
++
++/**
++ * Show the register offset of the Register Access.
++ */
++static ssize_t regoffset_show( struct device *_dev, struct device_attribute *attr, char *buf) 
++{
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	return snprintf(buf, sizeof("0xFFFFFFFF\n")+1,"0x%08x\n", otg_dev->reg_offset);
++}
++
++/**
++ * Set the register offset for the next Register Access 	Read/Write
++ */
++static ssize_t regoffset_store( struct device *_dev, struct device_attribute *attr, const char *buf, 
++                                size_t count ) 
++{
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	uint32_t offset = simple_strtoul(buf, NULL, 16);
++	//dev_dbg(_dev, "Offset=0x%08x\n", offset);
++	if (offset < SZ_256K ) {
++		otg_dev->reg_offset = offset;
++	}
++	else {
++		dev_err( _dev, "invalid offset\n" );
++	}
++
++	return count;
++}
++DEVICE_ATTR(regoffset, S_IRUGO|S_IWUSR, regoffset_show, regoffset_store);
++
++/**
++ * Show the value of the register at the offset in the reg_offset
++ * attribute.
++ */
++static ssize_t regvalue_show( struct device *_dev, struct device_attribute *attr, char *buf) 
++{
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	uint32_t val;
++	volatile uint32_t *addr;
++        
++	if (otg_dev->reg_offset != 0xFFFFFFFF &&  0 != otg_dev->base) {
++		/* Calculate the address */
++		addr = (uint32_t*)(otg_dev->reg_offset + 
++				   (uint8_t*)otg_dev->base);
++		//dev_dbg(_dev, "@0x%08x\n", (unsigned)addr); 
++		val = dwc_read_reg32( addr );             
++		return snprintf(buf, sizeof("Reg@0xFFFFFFFF = 0xFFFFFFFF\n")+1,
++				"Reg@0x%06x = 0x%08x\n", 
++				otg_dev->reg_offset, val);
++	}
++	else {
++		dev_err(_dev, "Invalid offset (0x%0x)\n", 
++			otg_dev->reg_offset);
++		return sprintf(buf, "invalid offset\n" );
++	}
++}
++
++/**
++ * Store the value in the register at the offset in the reg_offset
++ * attribute.
++ * 
++ */
++static ssize_t regvalue_store( struct device *_dev, struct device_attribute *attr, const char *buf, 
++                               size_t count ) 
++{
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	volatile uint32_t * addr;
++	uint32_t val = simple_strtoul(buf, NULL, 16);
++	//dev_dbg(_dev, "Offset=0x%08x Val=0x%08x\n", otg_dev->reg_offset, val);
++	if (otg_dev->reg_offset != 0xFFFFFFFF && 0 != otg_dev->base) {
++		/* Calculate the address */
++		addr = (uint32_t*)(otg_dev->reg_offset + 
++				   (uint8_t*)otg_dev->base);
++		//dev_dbg(_dev, "@0x%08x\n", (unsigned)addr); 
++		dwc_write_reg32( addr, val );
++	}
++	else {
++		dev_err(_dev, "Invalid Register Offset (0x%08x)\n", 
++			otg_dev->reg_offset);
++	}
++	return count;
++}
++DEVICE_ATTR(regvalue,  S_IRUGO|S_IWUSR, regvalue_show, regvalue_store);
++
++/*
++ * Attributes
++ */
++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(mode,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<20),20,"Mode");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hnpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<9),9,"Mode");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(srpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<8),8,"Mode");
++
++//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(buspower,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
++//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(bussuspend,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(busconnected,otg_dev->core_if->host_if->hprt0,0x01,0,"Bus Connected");
++
++DWC_OTG_DEVICE_ATTR_REG32_RW(gotgctl,&(otg_dev->core_if->core_global_regs->gotgctl),"GOTGCTL");
++DWC_OTG_DEVICE_ATTR_REG32_RW(gusbcfg,&(otg_dev->core_if->core_global_regs->gusbcfg),"GUSBCFG");
++DWC_OTG_DEVICE_ATTR_REG32_RW(grxfsiz,&(otg_dev->core_if->core_global_regs->grxfsiz),"GRXFSIZ");
++DWC_OTG_DEVICE_ATTR_REG32_RW(gnptxfsiz,&(otg_dev->core_if->core_global_regs->gnptxfsiz),"GNPTXFSIZ");
++DWC_OTG_DEVICE_ATTR_REG32_RW(gpvndctl,&(otg_dev->core_if->core_global_regs->gpvndctl),"GPVNDCTL");
++DWC_OTG_DEVICE_ATTR_REG32_RW(ggpio,&(otg_dev->core_if->core_global_regs->ggpio),"GGPIO");
++DWC_OTG_DEVICE_ATTR_REG32_RW(guid,&(otg_dev->core_if->core_global_regs->guid),"GUID");
++DWC_OTG_DEVICE_ATTR_REG32_RO(gsnpsid,&(otg_dev->core_if->core_global_regs->gsnpsid),"GSNPSID");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(devspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dcfg),0x3,0,"Device Speed");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(enumspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dsts),0x6,1,"Device Enumeration Speed");
++
++DWC_OTG_DEVICE_ATTR_REG32_RO(hptxfsiz,&(otg_dev->core_if->core_global_regs->hptxfsiz),"HPTXFSIZ");
++DWC_OTG_DEVICE_ATTR_REG32_RW(hprt0,otg_dev->core_if->host_if->hprt0,"HPRT0");
++
++
++/**
++ * @todo Add code to initiate the HNP.
++ */
++/**
++ * Show the HNP status bit
++ */
++static ssize_t hnp_show( struct device *_dev, struct device_attribute *attr, char *buf) 
++{
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	gotgctl_data_t val;
++	val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl));
++	return sprintf (buf, "HstNegScs = 0x%x\n", val.b.hstnegscs);
++}
++
++/**
++ * Set the HNP Request bit
++ */
++static ssize_t hnp_store( struct device *_dev, struct device_attribute *attr, const char *buf, 
++			  size_t count ) 
++{
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	uint32_t in = simple_strtoul(buf, NULL, 16);
++	uint32_t *addr = (uint32_t *)&(otg_dev->core_if->core_global_regs->gotgctl);
++	gotgctl_data_t mem;
++	mem.d32 = dwc_read_reg32(addr);
++	mem.b.hnpreq = in;
++	dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
++	dwc_write_reg32(addr, mem.d32);
++	return count;
++}
++DEVICE_ATTR(hnp, 0644, hnp_show, hnp_store);
++
++/**
++ * @todo Add code to initiate the SRP.
++ */
++/**
++ * Show the SRP status bit
++ */
++static ssize_t srp_show( struct device *_dev, struct device_attribute *attr, char *buf) 
++{
++#ifndef DWC_HOST_ONLY
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	gotgctl_data_t val;
++	val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl));
++	return sprintf (buf, "SesReqScs = 0x%x\n", val.b.sesreqscs);
++#else
++	return sprintf(buf, "Host Only Mode!\n");
++#endif
++}
++
++/**
++ * Set the SRP Request bit
++ */
++static ssize_t srp_store( struct device *_dev, struct device_attribute *attr, const char *buf, 
++			  size_t count ) 
++{
++#ifndef DWC_HOST_ONLY
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	dwc_otg_pcd_initiate_srp(otg_dev->pcd);
++#endif
++	return count;
++}
++DEVICE_ATTR(srp, 0644, srp_show, srp_store);
++
++/**
++ * @todo Need to do more for power on/off?
++ */
++/**
++ * Show the Bus Power status
++ */
++static ssize_t buspower_show( struct device *_dev, struct device_attribute *attr, char *buf) 
++{
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	hprt0_data_t val;
++	val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0);
++	return sprintf (buf, "Bus Power = 0x%x\n", val.b.prtpwr);
++}
++
++
++/**
++ * Set the Bus Power status
++ */
++static ssize_t buspower_store( struct device *_dev, struct device_attribute *attr, const char *buf, 
++                               size_t count ) 
++{
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	uint32_t on = simple_strtoul(buf, NULL, 16);
++	uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0;
++	hprt0_data_t mem;
++
++	mem.d32 = dwc_read_reg32(addr);
++	mem.b.prtpwr = on;
++
++	//dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
++	dwc_write_reg32(addr, mem.d32);
++
++	return count;
++}
++DEVICE_ATTR(buspower, 0644, buspower_show, buspower_store);
++
++/**
++ * @todo Need to do more for suspend?
++ */
++/**
++ * Show the Bus Suspend status
++ */
++static ssize_t bussuspend_show( struct device *_dev, struct device_attribute *attr, char *buf) 
++{
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	hprt0_data_t val;
++	val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0);
++	return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp);
++}
++
++/**
++ * Set the Bus Suspend status
++ */
++static ssize_t bussuspend_store( struct device *_dev, struct device_attribute *attr, const char *buf, 
++                                 size_t count ) 
++{
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	uint32_t in = simple_strtoul(buf, NULL, 16);
++	uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0;
++	hprt0_data_t mem;
++	mem.d32 = dwc_read_reg32(addr);
++	mem.b.prtsusp = in;
++	dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
++	dwc_write_reg32(addr, mem.d32);
++	return count;
++}
++DEVICE_ATTR(bussuspend, 0644, bussuspend_show, bussuspend_store);
++
++/**
++ * Show the status of Remote Wakeup.
++ */
++static ssize_t remote_wakeup_show( struct device *_dev, struct device_attribute *attr, char *buf) 
++{
++#ifndef DWC_HOST_ONLY
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	dctl_data_t val;
++	val.d32 = dwc_read_reg32( &otg_dev->core_if->dev_if->dev_global_regs->dctl);
++	return sprintf( buf, "Remote Wakeup = %d Enabled = %d\n", 
++                        val.b.rmtwkupsig, otg_dev->pcd->remote_wakeup_enable);
++#else
++	return sprintf(buf, "Host Only Mode!\n");
++#endif
++}
++
++/**
++ * Initiate a remote wakeup of the host.  The Device control register
++ * Remote Wakeup Signal bit is written if the PCD Remote wakeup enable
++ * flag is set.
++ * 
++ */
++static ssize_t remote_wakeup_store( struct device *_dev, struct device_attribute *attr, const char *buf, 
++                                    size_t count ) 
++{
++#ifndef DWC_HOST_ONLY
++        uint32_t val = simple_strtoul(buf, NULL, 16);        
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	if (val&1) {
++		dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 1);
++	}
++	else {
++		dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 0);
++	}
++#endif
++	return count;
++}
++DEVICE_ATTR(remote_wakeup,  S_IRUGO|S_IWUSR, remote_wakeup_show, 
++            remote_wakeup_store);
++
++/**
++ * Dump global registers and either host or device registers (depending on the
++ * current mode of the core).
++ */
++static ssize_t regdump_show( struct device *_dev, struct device_attribute *attr, char *buf) 
++{
++#ifdef DEBUG
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	printk("%s otg_dev=0x%p\n", __FUNCTION__, otg_dev);
++
++        dwc_otg_dump_global_registers( otg_dev->core_if);
++        if (dwc_otg_is_host_mode(otg_dev->core_if)) {
++                dwc_otg_dump_host_registers( otg_dev->core_if);
++        } else {
++                dwc_otg_dump_dev_registers( otg_dev->core_if);
++        }
++#endif
++
++   	return sprintf( buf, "Register Dump\n" );
++}
++
++DEVICE_ATTR(regdump, S_IRUGO|S_IWUSR, regdump_show, 0);
++
++/**
++ * Dump the current hcd state.
++ */
++static ssize_t hcddump_show( struct device *_dev, struct device_attribute *attr, char *buf) 
++{
++#ifndef DWC_DEVICE_ONLY
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	dwc_otg_hcd_dump_state(otg_dev->hcd);
++#endif
++   	return sprintf( buf, "HCD Dump\n" );
++}
++
++DEVICE_ATTR(hcddump, S_IRUGO|S_IWUSR, hcddump_show, 0);
++
++/**
++ * Dump the average frame remaining at SOF. This can be used to
++ * determine average interrupt latency. Frame remaining is also shown for
++ * start transfer and two additional sample points.
++ */
++static ssize_t hcd_frrem_show( struct device *_dev, struct device_attribute *attr, char *buf) 
++{
++#ifndef DWC_DEVICE_ONLY
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	dwc_otg_hcd_dump_frrem(otg_dev->hcd);
++#endif
++   	return sprintf( buf, "HCD Dump Frame Remaining\n" );
++}
++
++DEVICE_ATTR(hcd_frrem, S_IRUGO|S_IWUSR, hcd_frrem_show, 0);
++
++/**
++ * Displays the time required to read the GNPTXFSIZ register many times (the
++ * output shows the number of times the register is read).
++ */
++#define RW_REG_COUNT 10000000
++#define MSEC_PER_JIFFIE 1000/HZ	
++static ssize_t rd_reg_test_show( struct device *_dev, struct device_attribute *attr, char *buf) 
++{
++	int i;
++	int time;
++	int start_jiffies;
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++	printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
++	       HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
++	start_jiffies = jiffies;
++	for (i = 0; i < RW_REG_COUNT; i++) {
++		dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz);
++	}
++	time = jiffies - start_jiffies;
++   	return sprintf( buf, "Time to read GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
++			RW_REG_COUNT, time * MSEC_PER_JIFFIE, time );
++}
++
++DEVICE_ATTR(rd_reg_test, S_IRUGO|S_IWUSR, rd_reg_test_show, 0);
++
++/**
++ * Displays the time required to write the GNPTXFSIZ register many times (the
++ * output shows the number of times the register is written).
++ */
++static ssize_t wr_reg_test_show( struct device *_dev, struct device_attribute *attr, char *buf) 
++{
++	int i;
++	int time;
++	int start_jiffies;
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	uint32_t reg_val;
++
++	printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
++	       HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
++	reg_val = dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz);
++	start_jiffies = jiffies;
++	for (i = 0; i < RW_REG_COUNT; i++) {
++		dwc_write_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz, reg_val);
++	}
++	time = jiffies - start_jiffies;
++   	return sprintf( buf, "Time to write GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
++			RW_REG_COUNT, time * MSEC_PER_JIFFIE, time);
++}
++
++DEVICE_ATTR(wr_reg_test, S_IRUGO|S_IWUSR, wr_reg_test_show, 0);
++/**@}*/
++
++/**
++ * Create the device files
++ */
++void dwc_otg_attr_create (struct device *_dev)
++{
++    int retval;
++    
++    retval = device_create_file(_dev, &dev_attr_regoffset);
++    retval += device_create_file(_dev, &dev_attr_regvalue);
++    retval += device_create_file(_dev, &dev_attr_mode);
++    retval += device_create_file(_dev, &dev_attr_hnpcapable);
++    retval += device_create_file(_dev, &dev_attr_srpcapable);
++    retval += device_create_file(_dev, &dev_attr_hnp);
++    retval += device_create_file(_dev, &dev_attr_srp);
++    retval += device_create_file(_dev, &dev_attr_buspower);
++    retval += device_create_file(_dev, &dev_attr_bussuspend);
++    retval += device_create_file(_dev, &dev_attr_busconnected);
++    retval += device_create_file(_dev, &dev_attr_gotgctl);
++    retval += device_create_file(_dev, &dev_attr_gusbcfg);
++    retval += device_create_file(_dev, &dev_attr_grxfsiz);
++    retval += device_create_file(_dev, &dev_attr_gnptxfsiz);
++    retval += device_create_file(_dev, &dev_attr_gpvndctl);
++    retval += device_create_file(_dev, &dev_attr_ggpio);
++    retval += device_create_file(_dev, &dev_attr_guid);
++    retval += device_create_file(_dev, &dev_attr_gsnpsid);
++    retval += device_create_file(_dev, &dev_attr_devspeed);
++    retval += device_create_file(_dev, &dev_attr_enumspeed);
++    retval += device_create_file(_dev, &dev_attr_hptxfsiz);
++    retval += device_create_file(_dev, &dev_attr_hprt0);
++    retval += device_create_file(_dev, &dev_attr_remote_wakeup);
++    retval += device_create_file(_dev, &dev_attr_regdump);
++    retval += device_create_file(_dev, &dev_attr_hcddump);
++    retval += device_create_file(_dev, &dev_attr_hcd_frrem);
++    retval += device_create_file(_dev, &dev_attr_rd_reg_test);
++    retval += device_create_file(_dev, &dev_attr_wr_reg_test);
++
++    if(retval != 0)
++    {
++        DWC_PRINT("cannot create sysfs device files.\n");
++        // DWC_PRINT("killing own sysfs device files!\n");
++        dwc_otg_attr_remove(_dev);
++    }
++}
++
++/**
++ * Remove the device files
++ */
++void dwc_otg_attr_remove (struct device *_dev)
++{
++	device_remove_file(_dev, &dev_attr_regoffset);
++	device_remove_file(_dev, &dev_attr_regvalue);
++	device_remove_file(_dev, &dev_attr_mode);
++	device_remove_file(_dev, &dev_attr_hnpcapable);
++	device_remove_file(_dev, &dev_attr_srpcapable);
++	device_remove_file(_dev, &dev_attr_hnp);
++	device_remove_file(_dev, &dev_attr_srp);
++	device_remove_file(_dev, &dev_attr_buspower);
++	device_remove_file(_dev, &dev_attr_bussuspend);
++	device_remove_file(_dev, &dev_attr_busconnected);
++	device_remove_file(_dev, &dev_attr_gotgctl);
++	device_remove_file(_dev, &dev_attr_gusbcfg);
++	device_remove_file(_dev, &dev_attr_grxfsiz);
++	device_remove_file(_dev, &dev_attr_gnptxfsiz);
++	device_remove_file(_dev, &dev_attr_gpvndctl);
++	device_remove_file(_dev, &dev_attr_ggpio);
++	device_remove_file(_dev, &dev_attr_guid);
++	device_remove_file(_dev, &dev_attr_gsnpsid);
++	device_remove_file(_dev, &dev_attr_devspeed);
++	device_remove_file(_dev, &dev_attr_enumspeed);
++	device_remove_file(_dev, &dev_attr_hptxfsiz);
++	device_remove_file(_dev, &dev_attr_hprt0);      
++	device_remove_file(_dev, &dev_attr_remote_wakeup);      
++	device_remove_file(_dev, &dev_attr_regdump);
++	device_remove_file(_dev, &dev_attr_hcddump);
++	device_remove_file(_dev, &dev_attr_hcd_frrem);
++	device_remove_file(_dev, &dev_attr_rd_reg_test);
++	device_remove_file(_dev, &dev_attr_wr_reg_test);
++}
+diff --git a/drivers/usb/dwc_otg/dwc_otg_attr.h b/drivers/usb/dwc_otg/dwc_otg_attr.h
+new file mode 100644
+index 0000000..4bbf7df0
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_attr.h
+@@ -0,0 +1,67 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_attr.h $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 510275 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_OTG_ATTR_H__)
++#define __DWC_OTG_ATTR_H__
++
++/** @file
++ * This file contains the interface to the Linux device attributes.
++ */
++extern struct device_attribute dev_attr_regoffset;
++extern struct device_attribute dev_attr_regvalue;
++
++extern struct device_attribute dev_attr_mode;
++extern struct device_attribute dev_attr_hnpcapable;
++extern struct device_attribute dev_attr_srpcapable;
++extern struct device_attribute dev_attr_hnp;
++extern struct device_attribute dev_attr_srp;
++extern struct device_attribute dev_attr_buspower;
++extern struct device_attribute dev_attr_bussuspend;
++extern struct device_attribute dev_attr_busconnected;
++extern struct device_attribute dev_attr_gotgctl;
++extern struct device_attribute dev_attr_gusbcfg;
++extern struct device_attribute dev_attr_grxfsiz;
++extern struct device_attribute dev_attr_gnptxfsiz;
++extern struct device_attribute dev_attr_gpvndctl;
++extern struct device_attribute dev_attr_ggpio;
++extern struct device_attribute dev_attr_guid;
++extern struct device_attribute dev_attr_gsnpsid;
++extern struct device_attribute dev_attr_devspeed;
++extern struct device_attribute dev_attr_enumspeed;
++extern struct device_attribute dev_attr_hptxfsiz;
++extern struct device_attribute dev_attr_hprt0;
++
++void dwc_otg_attr_create (struct device *_dev);
++void dwc_otg_attr_remove (struct device *_dev);
++
++#endif
+diff --git a/drivers/usb/dwc_otg/dwc_otg_cil.c b/drivers/usb/dwc_otg/dwc_otg_cil.c
+new file mode 100644
+index 0000000..42c69eb
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_cil.c
+@@ -0,0 +1,3025 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_cil.c $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 631780 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file 
++ *
++ * The Core Interface Layer provides basic services for accessing and
++ * managing the DWC_otg hardware. These services are used by both the
++ * Host Controller Driver and the Peripheral Controller Driver.
++ *
++ * The CIL manages the memory map for the core so that the HCD and PCD
++ * don't have to do this separately. It also handles basic tasks like
++ * reading/writing the registers and data FIFOs in the controller.
++ * Some of the data access functions provide encapsulation of several
++ * operations required to perform a task, such as writing multiple
++ * registers to start a transfer. Finally, the CIL performs basic
++ * services that are not specific to either the host or device modes
++ * of operation. These services include management of the OTG Host
++ * Negotiation Protocol (HNP) and Session Request Protocol (SRP). A
++ * Diagnostic API is also provided to allow testing of the controller
++ * hardware.
++ *
++ * The Core Interface Layer has the following requirements:
++ * - Provides basic controller operations.
++ * - Minimal use of OS services.  
++ * - The OS services used will be abstracted by using inline functions
++ *   or macros.
++ *
++ */
++#include <asm/unaligned.h>
++
++#ifdef DEBUG
++#include <linux/jiffies.h>
++#endif
++
++#include "dwc_otg_plat.h"
++
++#include "dwc_otg_regs.h"
++#include "dwc_otg_cil.h"
++
++/** 
++ * This function is called to initialize the DWC_otg CSR data
++ * structures.  The register addresses in the device and host
++ * structures are initialized from the base address supplied by the
++ * caller.  The calling function must make the OS calls to get the
++ * base address of the DWC_otg controller registers.  The core_params
++ * argument holds the parameters that specify how the core should be
++ * configured.
++ *
++ * @param[in] _reg_base_addr Base address of DWC_otg core registers
++ * @param[in] _core_params Pointer to the core configuration parameters 
++ *
++ */
++dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *_reg_base_addr,
++                                    dwc_otg_core_params_t *_core_params)
++{
++    dwc_otg_core_if_t *core_if = 0;
++    dwc_otg_dev_if_t *dev_if = 0;
++    dwc_otg_host_if_t *host_if = 0;
++    uint8_t *reg_base = (uint8_t *)_reg_base_addr;
++    int i = 0;
++
++    DWC_DEBUGPL(DBG_CILV, "%s(%p,%p)\n", __func__, _reg_base_addr, _core_params);
++   
++    core_if = kmalloc( sizeof(dwc_otg_core_if_t), GFP_KERNEL);
++    if (core_if == 0) {
++        DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_core_if_t failed\n");
++        return 0;
++    }
++    memset(core_if, 0, sizeof(dwc_otg_core_if_t));
++        
++    core_if->core_params = _core_params;
++    core_if->core_global_regs = (dwc_otg_core_global_regs_t *)reg_base;
++    /*
++     * Allocate the Device Mode structures.
++     */
++    dev_if = kmalloc( sizeof(dwc_otg_dev_if_t), GFP_KERNEL);
++    if (dev_if == 0) {
++        DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_dev_if_t failed\n");
++        kfree( core_if );
++        return 0;
++    }
++
++    dev_if->dev_global_regs = 
++        (dwc_otg_device_global_regs_t *)(reg_base + DWC_DEV_GLOBAL_REG_OFFSET);
++        
++    for (i=0; i<MAX_EPS_CHANNELS; i++) {
++        dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *)
++            (reg_base + DWC_DEV_IN_EP_REG_OFFSET +
++            (i * DWC_EP_REG_OFFSET));
++                
++        dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *) 
++            (reg_base + DWC_DEV_OUT_EP_REG_OFFSET +
++            (i * DWC_EP_REG_OFFSET));
++        DWC_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p\n", 
++                            i, &dev_if->in_ep_regs[i]->diepctl);
++        DWC_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p\n", 
++                            i, &dev_if->out_ep_regs[i]->doepctl);
++    }
++    dev_if->speed = 0; // unknown
++    //dev_if->num_eps = MAX_EPS_CHANNELS;
++    //dev_if->num_perio_eps = 0;
++        
++    core_if->dev_if = dev_if;
++    /*
++    * Allocate the Host Mode structures.
++    */
++    host_if = kmalloc( sizeof(dwc_otg_host_if_t), GFP_KERNEL);
++    if (host_if == 0) {
++        DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_host_if_t failed\n");
++        kfree( dev_if );
++        kfree( core_if );
++        return 0;
++    }
++
++    host_if->host_global_regs = (dwc_otg_host_global_regs_t *)
++        (reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET);
++    host_if->hprt0 = (uint32_t*)(reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET);
++    for (i=0; i<MAX_EPS_CHANNELS; i++) {
++        host_if->hc_regs[i] = (dwc_otg_hc_regs_t *)
++            (reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET + 
++            (i * DWC_OTG_CHAN_REGS_OFFSET));
++        DWC_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n", 
++                            i, &host_if->hc_regs[i]->hcchar);
++    }
++    host_if->num_host_channels = MAX_EPS_CHANNELS;
++    core_if->host_if = host_if;
++
++    for (i=0; i<MAX_EPS_CHANNELS; i++) {
++        core_if->data_fifo[i] = 
++            (uint32_t *)(reg_base + DWC_OTG_DATA_FIFO_OFFSET + 
++            (i * DWC_OTG_DATA_FIFO_SIZE)); 
++        DWC_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08x\n", 
++            i, (unsigned)core_if->data_fifo[i]);
++    } // for loop.
++        
++    core_if->pcgcctl = (uint32_t*)(reg_base + DWC_OTG_PCGCCTL_OFFSET);
++
++    /*
++     * Store the contents of the hardware configuration registers here for
++     * easy access later.
++     */
++    core_if->hwcfg1.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg1);
++    core_if->hwcfg2.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg2);
++    core_if->hwcfg3.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg3);
++    core_if->hwcfg4.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg4);
++
++    DWC_DEBUGPL(DBG_CILV,"hwcfg1=%08x\n",core_if->hwcfg1.d32);
++    DWC_DEBUGPL(DBG_CILV,"hwcfg2=%08x\n",core_if->hwcfg2.d32);
++    DWC_DEBUGPL(DBG_CILV,"hwcfg3=%08x\n",core_if->hwcfg3.d32);
++    DWC_DEBUGPL(DBG_CILV,"hwcfg4=%08x\n",core_if->hwcfg4.d32);
++        
++
++    DWC_DEBUGPL(DBG_CILV,"op_mode=%0x\n",core_if->hwcfg2.b.op_mode);
++    DWC_DEBUGPL(DBG_CILV,"arch=%0x\n",core_if->hwcfg2.b.architecture);
++    DWC_DEBUGPL(DBG_CILV,"num_dev_ep=%d\n",core_if->hwcfg2.b.num_dev_ep);
++    DWC_DEBUGPL(DBG_CILV,"num_host_chan=%d\n",core_if->hwcfg2.b.num_host_chan);
++    DWC_DEBUGPL(DBG_CILV,"nonperio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.nonperio_tx_q_depth);
++    DWC_DEBUGPL(DBG_CILV,"host_perio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.host_perio_tx_q_depth);
++    DWC_DEBUGPL(DBG_CILV,"dev_token_q_depth=0x%0x\n",core_if->hwcfg2.b.dev_token_q_depth);
++
++    DWC_DEBUGPL(DBG_CILV,"Total FIFO SZ=%d\n", core_if->hwcfg3.b.dfifo_depth);
++    DWC_DEBUGPL(DBG_CILV,"xfer_size_cntr_width=%0x\n", core_if->hwcfg3.b.xfer_size_cntr_width);
++
++    /*
++     * Set the SRP sucess bit for FS-I2c
++     */
++    core_if->srp_success = 0;
++    core_if->srp_timer_started = 0;
++	
++    return core_if;
++}
++/**
++ * This function frees the structures allocated by dwc_otg_cil_init().
++ * 
++ * @param[in] _core_if The core interface pointer returned from
++ * dwc_otg_cil_init().
++ *
++ */
++void dwc_otg_cil_remove( dwc_otg_core_if_t *_core_if )
++{
++        /* Disable all interrupts */
++        dwc_modify_reg32( &_core_if->core_global_regs->gahbcfg, 1, 0);
++        dwc_write_reg32( &_core_if->core_global_regs->gintmsk, 0);
++
++        if ( _core_if->dev_if ) {
++                kfree( _core_if->dev_if );
++        }
++        if ( _core_if->host_if ) {
++                kfree( _core_if->host_if );
++        }
++        kfree( _core_if );
++}
++
++/**
++ * This function enables the controller's Global Interrupt in the AHB Config
++ * register.
++ *
++ * @param[in] _core_if Programming view of DWC_otg controller.
++ */
++extern void dwc_otg_enable_global_interrupts( dwc_otg_core_if_t *_core_if )
++{
++        gahbcfg_data_t ahbcfg = { .d32 = 0};
++        ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
++        dwc_modify_reg32(&_core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32);
++}
++/**
++ * This function disables the controller's Global Interrupt in the AHB Config
++ * register.
++ *
++ * @param[in] _core_if Programming view of DWC_otg controller.
++ */
++extern void dwc_otg_disable_global_interrupts( dwc_otg_core_if_t *_core_if )
++{
++        gahbcfg_data_t ahbcfg = { .d32 = 0};
++        ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
++        dwc_modify_reg32(&_core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0);
++}
++
++/**
++ * This function initializes the commmon interrupts, used in both
++ * device and host modes.
++ *
++ * @param[in] _core_if Programming view of the DWC_otg controller
++ *
++ */
++static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t *_core_if)
++{
++        dwc_otg_core_global_regs_t *global_regs = 
++                _core_if->core_global_regs;
++        gintmsk_data_t intr_mask = { .d32 = 0};
++        /* Clear any pending OTG Interrupts */
++        dwc_write_reg32( &global_regs->gotgint, 0xFFFFFFFF); 
++        /* Clear any pending interrupts */
++        dwc_write_reg32( &global_regs->gintsts, 0xFFFFFFFF); 
++        /* 
++         * Enable the interrupts in the GINTMSK. 
++         */
++        intr_mask.b.modemismatch = 1;
++        intr_mask.b.otgintr = 1;
++        if (!_core_if->dma_enable) {
++                intr_mask.b.rxstsqlvl = 1;
++        }
++        intr_mask.b.conidstschng = 1;
++        intr_mask.b.wkupintr = 1;
++        intr_mask.b.disconnect = 1;
++        intr_mask.b.usbsuspend = 1;
++	intr_mask.b.sessreqintr = 1;
++        dwc_write_reg32( &global_regs->gintmsk, intr_mask.d32);
++}
++
++/**
++ * Initializes the FSLSPClkSel field of the HCFG register depending on the PHY
++ * type.
++ */
++static void init_fslspclksel(dwc_otg_core_if_t *_core_if)
++{
++	uint32_t 	val;
++	hcfg_data_t 	hcfg;
++
++	if (((_core_if->hwcfg2.b.hs_phy_type == 2) &&
++	     (_core_if->hwcfg2.b.fs_phy_type == 1) &&
++	     (_core_if->core_params->ulpi_fs_ls)) ||
++	    (_core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS))
++	{
++		/* Full speed PHY */
++		val = DWC_HCFG_48_MHZ;
++	} else {
++		/* High speed PHY running at full speed or high speed */
++		val = DWC_HCFG_30_60_MHZ;
++	}
++
++	DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val);
++	hcfg.d32 = dwc_read_reg32(&_core_if->host_if->host_global_regs->hcfg);
++	hcfg.b.fslspclksel = val;
++	dwc_write_reg32(&_core_if->host_if->host_global_regs->hcfg, hcfg.d32);
++}
++
++/**
++ * Initializes the DevSpd field of the DCFG register depending on the PHY type
++ * and the enumeration speed of the device.
++ */
++static void init_devspd(dwc_otg_core_if_t *_core_if)
++{
++	uint32_t 	val;
++	dcfg_data_t 	dcfg;
++
++	if (((_core_if->hwcfg2.b.hs_phy_type == 2) &&
++	     (_core_if->hwcfg2.b.fs_phy_type == 1) &&
++	     (_core_if->core_params->ulpi_fs_ls)) ||
++	     (_core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) 
++	{
++		/* Full speed PHY */
++		val = 0x3;
++	} else if (_core_if->core_params->speed == DWC_SPEED_PARAM_FULL) {
++		/* High speed PHY running at full speed */
++		val = 0x1;
++	} else {
++		/* High speed PHY running at high speed */
++		val = 0x0;
++	}
++
++	DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val);
++	dcfg.d32 = dwc_read_reg32(&_core_if->dev_if->dev_global_regs->dcfg);
++	dcfg.b.devspd = val;
++	dwc_write_reg32(&_core_if->dev_if->dev_global_regs->dcfg, dcfg.d32);
++}
++
++/**
++ * This function calculates the number of IN EPS
++ * using GHWCFG1 and GHWCFG2 registers values
++ *
++ * @param _pcd the pcd structure.
++ */
++static uint32_t calc_num_in_eps(dwc_otg_core_if_t * _core_if)
++{
++	uint32_t num_in_eps = 0;
++	uint32_t num_eps = _core_if->hwcfg2.b.num_dev_ep;
++	uint32_t hwcfg1 = _core_if->hwcfg1.d32 >> 2;
++	uint32_t num_tx_fifos = _core_if->hwcfg4.b.num_in_eps;
++	int i;
++	for (i = 0; i < num_eps; ++i) {
++		if (!(hwcfg1 & 0x1))
++			num_in_eps++;
++		hwcfg1 >>= 2;
++	}
++	if (_core_if->hwcfg4.b.ded_fifo_en) {
++		num_in_eps = (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps;
++	}
++	return num_in_eps;
++}
++
++
++/**
++ * This function calculates the number of OUT EPS
++ * using GHWCFG1 and GHWCFG2 registers values
++ *
++ * @param _pcd the pcd structure.
++ */
++static uint32_t calc_num_out_eps(dwc_otg_core_if_t * _core_if)
++{
++	uint32_t num_out_eps = 0;
++	uint32_t num_eps = _core_if->hwcfg2.b.num_dev_ep;
++	uint32_t hwcfg1 = _core_if->hwcfg1.d32 >> 2;
++	int i;
++	for (i = 0; i < num_eps; ++i) {
++		if (!(hwcfg1 & 0x2))
++			num_out_eps++;
++		hwcfg1 >>= 2;
++	}
++	return num_out_eps;
++}
++/**
++ * This function initializes the DWC_otg controller registers and
++ * prepares the core for device mode or host mode operation.
++ *
++ * @param _core_if Programming view of the DWC_otg controller
++ *
++ */
++void dwc_otg_core_init(dwc_otg_core_if_t *_core_if) 
++{
++	dwc_otg_core_global_regs_t * global_regs = _core_if->core_global_regs;
++    dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
++    int i = 0;
++    gahbcfg_data_t ahbcfg = { .d32 = 0};
++    gusbcfg_data_t usbcfg = { .d32 = 0 };
++    gi2cctl_data_t i2cctl = {.d32 = 0};
++
++    DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p)\n",_core_if);
++
++    /* Common Initialization */
++
++    usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++	DWC_DEBUGPL(DBG_CIL, "USB config register: 0x%08x\n", usbcfg.d32);
++
++    /* Program the ULPI External VBUS bit if needed */
++    //usbcfg.b.ulpi_ext_vbus_drv = 1;
++    //usbcfg.b.ulpi_ext_vbus_drv = 0;
++    usbcfg.b.ulpi_ext_vbus_drv = 
++        (_core_if->core_params->phy_ulpi_ext_vbus == DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0;
++
++    /* Set external TS Dline pulsing */
++    usbcfg.b.term_sel_dl_pulse = (_core_if->core_params->ts_dline == 1) ? 1 : 0;
++    dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
++
++    /* Reset the Controller */
++    dwc_otg_core_reset( _core_if );
++
++    /* Initialize parameters from Hardware configuration registers. */
++#if 0
++    dev_if->num_eps = _core_if->hwcfg2.b.num_dev_ep;
++    dev_if->num_perio_eps = _core_if->hwcfg4.b.num_dev_perio_in_ep;
++#else
++	dev_if->num_in_eps = calc_num_in_eps(_core_if);
++	dev_if->num_out_eps = calc_num_out_eps(_core_if);
++#endif        
++	DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n",
++		       _core_if->hwcfg4.b.num_dev_perio_in_ep);
++	DWC_DEBUGPL(DBG_CIL, "Is power optimization enabled?  %s\n",
++		     _core_if->hwcfg4.b.power_optimiz ? "Yes" : "No");
++	DWC_DEBUGPL(DBG_CIL, "vbus_valid filter enabled?  %s\n",
++		     _core_if->hwcfg4.b.vbus_valid_filt_en ? "Yes" : "No");
++	DWC_DEBUGPL(DBG_CIL, "iddig filter enabled?  %s\n",
++		     _core_if->hwcfg4.b.iddig_filt_en ? "Yes" : "No");
++
++    DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n",_core_if->hwcfg4.b.num_dev_perio_in_ep);
++    for (i=0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++) {
++        dev_if->perio_tx_fifo_size[i] =
++		    dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
++		DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n", i,
++			     dev_if->perio_tx_fifo_size[i]);
++	}
++	for (i = 0; i < _core_if->hwcfg4.b.num_in_eps; i++) {
++		dev_if->tx_fifo_size[i] =
++		    dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
++		DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n", i,
++			     dev_if->perio_tx_fifo_size[i]);
++	}
++        
++    _core_if->total_fifo_size = _core_if->hwcfg3.b.dfifo_depth;
++	_core_if->rx_fifo_size = dwc_read_reg32(&global_regs->grxfsiz);
++	_core_if->nperio_tx_fifo_size = dwc_read_reg32(&global_regs->gnptxfsiz) >> 16;
++        
++    DWC_DEBUGPL(DBG_CIL, "Total FIFO SZ=%d\n", _core_if->total_fifo_size);
++    DWC_DEBUGPL(DBG_CIL, "Rx FIFO SZ=%d\n", _core_if->rx_fifo_size);
++    DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO SZ=%d\n", _core_if->nperio_tx_fifo_size);
++
++    /* This programming sequence needs to happen in FS mode before any other
++    * programming occurs */
++    if ((_core_if->core_params->speed == DWC_SPEED_PARAM_FULL) &&
++        (_core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
++        /* If FS mode with FS PHY */
++
++        /* core_init() is now called on every switch so only call the
++         * following for the first time through. */
++        if (!_core_if->phy_init_done) {
++            _core_if->phy_init_done = 1;
++            DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n");
++            usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++            usbcfg.b.physel = 1;
++            dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
++
++            /* Reset after a PHY select */
++            dwc_otg_core_reset( _core_if );
++        }
++
++        /* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS.  Also
++         * do this on HNP Dev/Host mode switches (done in dev_init and
++         * host_init). */
++        if (dwc_otg_is_host_mode(_core_if)) {
++			DWC_DEBUGPL(DBG_CIL, "host mode\n");
++            init_fslspclksel(_core_if);
++		} else {
++			DWC_DEBUGPL(DBG_CIL, "device mode\n");
++            init_devspd(_core_if);
++        }
++
++        if (_core_if->core_params->i2c_enable) {
++            DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n");
++            /* Program GUSBCFG.OtgUtmifsSel to I2C */
++            usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++            usbcfg.b.otgutmifssel = 1;
++            dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
++				
++            /* Program GI2CCTL.I2CEn */
++            i2cctl.d32 = dwc_read_reg32(&global_regs->gi2cctl);
++            i2cctl.b.i2cdevaddr = 1;
++            i2cctl.b.i2cen = 0;
++            dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32);
++            i2cctl.b.i2cen = 1;
++            dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32);
++        }
++
++    } /* endif speed == DWC_SPEED_PARAM_FULL */
++	else {
++        /* High speed PHY. */
++        if (!_core_if->phy_init_done) {
++            _core_if->phy_init_done = 1;
++			DWC_DEBUGPL(DBG_CIL, "High spped PHY\n");
++            /* HS PHY parameters.  These parameters are preserved
++             * during soft reset so only program the first time.  Do
++             * a soft reset immediately after setting phyif.  */
++            usbcfg.b.ulpi_utmi_sel = _core_if->core_params->phy_type;
++            if (usbcfg.b.ulpi_utmi_sel == 2) { // winder
++				DWC_DEBUGPL(DBG_CIL, "ULPI\n");
++                /* ULPI interface */
++                usbcfg.b.phyif = 0;
++                usbcfg.b.ddrsel = _core_if->core_params->phy_ulpi_ddr;
++            } else {
++                /* UTMI+ interface */
++                if (_core_if->core_params->phy_utmi_width == 16) {
++                    usbcfg.b.phyif = 1;
++					DWC_DEBUGPL(DBG_CIL, "UTMI+ 16\n");
++				} else {
++					DWC_DEBUGPL(DBG_CIL, "UTMI+ 8\n");
++                    usbcfg.b.phyif = 0;
++                }
++            }
++            dwc_write_reg32( &global_regs->gusbcfg, usbcfg.d32);
++
++            /* Reset after setting the PHY parameters */
++            dwc_otg_core_reset( _core_if );
++        }
++    }
++
++    if ((_core_if->hwcfg2.b.hs_phy_type == 2) &&
++        (_core_if->hwcfg2.b.fs_phy_type == 1) &&
++        (_core_if->core_params->ulpi_fs_ls)) 
++    {
++        DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n");
++        usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++        usbcfg.b.ulpi_fsls = 1;
++        usbcfg.b.ulpi_clk_sus_m = 1;
++        dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++	} else {
++		DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS=0\n");
++        usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++        usbcfg.b.ulpi_fsls = 0;
++        usbcfg.b.ulpi_clk_sus_m = 0;
++        dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++    }
++
++    /* Program the GAHBCFG Register.*/
++    switch (_core_if->hwcfg2.b.architecture){
++
++        case DWC_SLAVE_ONLY_ARCH:
++            DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n");
++            ahbcfg.b.nptxfemplvl_txfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
++            ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
++            _core_if->dma_enable = 0;
++            break;
++
++        case DWC_EXT_DMA_ARCH:
++            DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n");
++            ahbcfg.b.hburstlen = _core_if->core_params->dma_burst_size; 
++            _core_if->dma_enable = (_core_if->core_params->dma_enable != 0);
++            break;
++
++        case DWC_INT_DMA_ARCH:
++            DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n");
++            //ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR;
++            ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR4;
++            _core_if->dma_enable = (_core_if->core_params->dma_enable != 0);
++            break;
++    }
++    ahbcfg.b.dmaenable = _core_if->dma_enable;
++    dwc_write_reg32(&global_regs->gahbcfg, ahbcfg.d32);
++	_core_if->en_multiple_tx_fifo = _core_if->hwcfg4.b.ded_fifo_en;
++
++    /* 
++     * Program the GUSBCFG register. 
++     */
++    usbcfg.d32 = dwc_read_reg32( &global_regs->gusbcfg );
++
++    switch (_core_if->hwcfg2.b.op_mode) {
++        case DWC_MODE_HNP_SRP_CAPABLE:
++            usbcfg.b.hnpcap = (_core_if->core_params->otg_cap ==
++            DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE);
++            usbcfg.b.srpcap = (_core_if->core_params->otg_cap !=
++            DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++            break;
++
++        case DWC_MODE_SRP_ONLY_CAPABLE:
++            usbcfg.b.hnpcap = 0;
++            usbcfg.b.srpcap = (_core_if->core_params->otg_cap !=
++            DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++            break;
++
++        case DWC_MODE_NO_HNP_SRP_CAPABLE:
++            usbcfg.b.hnpcap = 0;
++            usbcfg.b.srpcap = 0;
++            break;
++
++        case DWC_MODE_SRP_CAPABLE_DEVICE:
++            usbcfg.b.hnpcap = 0;
++            usbcfg.b.srpcap = (_core_if->core_params->otg_cap !=
++            DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++            break;
++
++        case DWC_MODE_NO_SRP_CAPABLE_DEVICE:
++            usbcfg.b.hnpcap = 0;
++            usbcfg.b.srpcap = 0;
++            break;
++
++        case DWC_MODE_SRP_CAPABLE_HOST:
++            usbcfg.b.hnpcap = 0;
++            usbcfg.b.srpcap = (_core_if->core_params->otg_cap !=
++            DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++            break;
++
++        case DWC_MODE_NO_SRP_CAPABLE_HOST:
++            usbcfg.b.hnpcap = 0;
++            usbcfg.b.srpcap = 0;
++            break;
++    }
++
++    dwc_write_reg32( &global_regs->gusbcfg, usbcfg.d32);
++        
++    /* Enable common interrupts */
++    dwc_otg_enable_common_interrupts( _core_if );
++
++    /* Do device or host intialization based on mode during PCD
++     * and HCD initialization  */
++    if (dwc_otg_is_host_mode( _core_if )) {
++        DWC_DEBUGPL(DBG_ANY, "Host Mode\n" );
++        _core_if->op_state = A_HOST;
++    } else {
++        DWC_DEBUGPL(DBG_ANY, "Device Mode\n" );
++        _core_if->op_state = B_PERIPHERAL;
++#ifdef DWC_DEVICE_ONLY
++        dwc_otg_core_dev_init( _core_if );
++#endif
++    }
++}
++
++
++/** 
++ * This function enables the Device mode interrupts.
++ *
++ * @param _core_if Programming view of DWC_otg controller
++ */
++void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *_core_if)
++{
++        gintmsk_data_t intr_mask = { .d32 = 0};
++	dwc_otg_core_global_regs_t * global_regs = _core_if->core_global_regs;
++
++        DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
++
++        /* Disable all interrupts. */
++        dwc_write_reg32( &global_regs->gintmsk, 0);
++
++        /* Clear any pending interrupts */
++        dwc_write_reg32( &global_regs->gintsts, 0xFFFFFFFF); 
++
++        /* Enable the common interrupts */
++        dwc_otg_enable_common_interrupts( _core_if );
++
++        /* Enable interrupts */
++        intr_mask.b.usbreset = 1;
++        intr_mask.b.enumdone = 1;
++        //intr_mask.b.epmismatch = 1;
++        intr_mask.b.inepintr = 1;
++        intr_mask.b.outepintr = 1;
++        intr_mask.b.erlysuspend = 1;
++	if (_core_if->en_multiple_tx_fifo == 0) {
++		intr_mask.b.epmismatch = 1;
++	}
++
++        /** @todo NGS: Should this be a module parameter? */
++        intr_mask.b.isooutdrop = 1;
++        intr_mask.b.eopframe = 1;
++        intr_mask.b.incomplisoin = 1;
++        intr_mask.b.incomplisoout = 1;
++
++        dwc_modify_reg32( &global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
++
++        DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__, 
++                    dwc_read_reg32( &global_regs->gintmsk));
++}
++
++/**
++ * This function initializes the DWC_otg controller registers for
++ * device mode.
++ * 
++ * @param _core_if Programming view of DWC_otg controller
++ *
++ */
++void dwc_otg_core_dev_init(dwc_otg_core_if_t *_core_if)
++{
++        dwc_otg_core_global_regs_t *global_regs = 
++                _core_if->core_global_regs;
++        dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
++        dwc_otg_core_params_t *params = _core_if->core_params;
++        dcfg_data_t dcfg = {.d32 = 0};
++        grstctl_t resetctl = { .d32=0 };
++        int i;
++        uint32_t rx_fifo_size;
++        fifosize_data_t nptxfifosize;
++	fifosize_data_t txfifosize;
++	dthrctl_data_t dthrctl;
++
++        fifosize_data_t ptxfifosize;
++        
++        /* Restart the Phy Clock */
++        dwc_write_reg32(_core_if->pcgcctl, 0);
++        
++        /* Device configuration register */
++	init_devspd(_core_if);
++	dcfg.d32 = dwc_read_reg32( &dev_if->dev_global_regs->dcfg);
++        dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80;
++        dwc_write_reg32( &dev_if->dev_global_regs->dcfg, dcfg.d32 );
++
++        /* Configure data FIFO sizes */
++        if ( _core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo ) {
++                
++                DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", _core_if->total_fifo_size);
++                DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", params->dev_rx_fifo_size);
++                DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", params->dev_nperio_tx_fifo_size);
++
++		/* Rx FIFO */
++                DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n", 
++                            dwc_read_reg32(&global_regs->grxfsiz));
++                rx_fifo_size = params->dev_rx_fifo_size;
++                dwc_write_reg32( &global_regs->grxfsiz, rx_fifo_size );
++                DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n", 
++                            dwc_read_reg32(&global_regs->grxfsiz));
++
++		/** Set Periodic Tx FIFO Mask all bits 0 */
++	    _core_if->p_tx_msk = 0;
++
++		/** Set Tx FIFO Mask all bits 0 */
++	    _core_if->tx_msk = 0;
++		if (_core_if->en_multiple_tx_fifo == 0) {
++		/* Non-periodic Tx FIFO */
++                DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", 
++                            dwc_read_reg32(&global_regs->gnptxfsiz));
++                nptxfifosize.b.depth  = params->dev_nperio_tx_fifo_size;
++                nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
++                dwc_write_reg32( &global_regs->gnptxfsiz, nptxfifosize.d32 );
++                DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", 
++                            dwc_read_reg32(&global_regs->gnptxfsiz));
++
++
++                /**@todo NGS: Fix Periodic FIFO Sizing! */
++		/*
++		 * Periodic Tx FIFOs These FIFOs are numbered from 1 to 15.
++		 * Indexes of the FIFO size module parameters in the
++		 * dev_perio_tx_fifo_size array and the FIFO size registers in
++		 * the dptxfsiz array run from 0 to 14.
++		 */
++                /** @todo Finish debug of this */   
++		    ptxfifosize.b.startaddr =
++		    nptxfifosize.b.startaddr + nptxfifosize.b.depth;
++			for (i = 0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep;i++) {
++			ptxfifosize.b.depth = params->dev_perio_tx_fifo_size[i];
++				DWC_DEBUGPL(DBG_CIL,"initial dptxfsiz_dieptxf[%d]=%08x\n",
++				     i,dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
++				dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i],ptxfifosize.d32);
++				DWC_DEBUGPL(DBG_CIL,"new dptxfsiz_dieptxf[%d]=%08x\n",
++				     i,dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
++                        ptxfifosize.b.startaddr += ptxfifosize.b.depth;
++                }
++		} else {
++
++		    /*
++		     * Tx FIFOs These FIFOs are numbered from 1 to 15.
++		     * Indexes of the FIFO size module parameters in the
++		     * dev_tx_fifo_size array and the FIFO size registers in
++		     * the dptxfsiz_dieptxf array run from 0 to 14.
++		     */
++
++		    /* Non-periodic Tx FIFO */
++		    DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
++				dwc_read_reg32(&global_regs->gnptxfsiz));
++			nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size;
++			nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
++			dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
++			DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
++				      dwc_read_reg32(&global_regs->gnptxfsiz));
++			txfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
++			for (i = 1;i < _core_if->hwcfg4.b.num_dev_perio_in_ep;i++) {
++				txfifosize.b.depth = params->dev_tx_fifo_size[i];
++				DWC_DEBUGPL(DBG_CIL,"initial dptxfsiz_dieptxf[%d]=%08x\n",
++				      i,dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
++				dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i - 1],txfifosize.d32);
++				DWC_DEBUGPL(DBG_CIL,"new dptxfsiz_dieptxf[%d]=%08x\n",
++				      i,dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i-1]));
++				txfifosize.b.startaddr += txfifosize.b.depth;
++        }
++		}
++	}
++        /* Flush the FIFOs */
++        dwc_otg_flush_tx_fifo(_core_if, 0x10); /* all Tx FIFOs */
++        dwc_otg_flush_rx_fifo(_core_if);
++
++	/* Flush the Learning Queue. */
++	resetctl.b.intknqflsh = 1;
++        dwc_write_reg32( &_core_if->core_global_regs->grstctl, resetctl.d32);
++
++        /* Clear all pending Device Interrupts */
++        dwc_write_reg32( &dev_if->dev_global_regs->diepmsk, 0 );
++        dwc_write_reg32( &dev_if->dev_global_regs->doepmsk, 0 );
++        dwc_write_reg32( &dev_if->dev_global_regs->daint, 0xFFFFFFFF );
++        dwc_write_reg32( &dev_if->dev_global_regs->daintmsk, 0 );
++
++	for (i = 0; i <= dev_if->num_in_eps; i++) {
++		depctl_data_t depctl;
++		depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl);
++		if (depctl.b.epena) {
++			depctl.d32 = 0;
++			depctl.b.epdis = 1;
++			depctl.b.snak = 1;
++		} else {
++			depctl.d32 = 0;
++		}
++		dwc_write_reg32( &dev_if->in_ep_regs[i]->diepctl, depctl.d32);
++
++		dwc_write_reg32(&dev_if->in_ep_regs[i]->dieptsiz, 0);
++		dwc_write_reg32(&dev_if->in_ep_regs[i]->diepdma, 0);
++		dwc_write_reg32(&dev_if->in_ep_regs[i]->diepint, 0xFF);
++	}
++	for (i = 0; i <= dev_if->num_out_eps; i++) {
++		depctl_data_t depctl;
++		depctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl);
++		if (depctl.b.epena) {
++			depctl.d32 = 0;
++			depctl.b.epdis = 1;
++			depctl.b.snak = 1;
++		} else {
++			depctl.d32 = 0;
++		}
++		dwc_write_reg32( &dev_if->out_ep_regs[i]->doepctl, depctl.d32);
++
++                //dwc_write_reg32( &dev_if->in_ep_regs[i]->dieptsiz, 0);
++                dwc_write_reg32( &dev_if->out_ep_regs[i]->doeptsiz, 0);
++                //dwc_write_reg32( &dev_if->in_ep_regs[i]->diepdma, 0);
++                dwc_write_reg32( &dev_if->out_ep_regs[i]->doepdma, 0);
++                //dwc_write_reg32( &dev_if->in_ep_regs[i]->diepint, 0xFF);
++                dwc_write_reg32( &dev_if->out_ep_regs[i]->doepint, 0xFF);
++        }
++        
++	if (_core_if->en_multiple_tx_fifo && _core_if->dma_enable) {
++		dev_if->non_iso_tx_thr_en = _core_if->core_params->thr_ctl & 0x1;
++		dev_if->iso_tx_thr_en = (_core_if->core_params->thr_ctl >> 1) & 0x1;
++		dev_if->rx_thr_en = (_core_if->core_params->thr_ctl >> 2) & 0x1;
++		dev_if->rx_thr_length = _core_if->core_params->rx_thr_length;
++		dev_if->tx_thr_length = _core_if->core_params->tx_thr_length;
++		dthrctl.d32 = 0;
++		dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en;
++		dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en;
++		dthrctl.b.tx_thr_len = dev_if->tx_thr_length;
++		dthrctl.b.rx_thr_en = dev_if->rx_thr_en;
++		dthrctl.b.rx_thr_len = dev_if->rx_thr_length;
++		dwc_write_reg32(&dev_if->dev_global_regs->dtknqr3_dthrctl,dthrctl.d32);
++		DWC_DEBUGPL(DBG_CIL, "Non ISO Tx Thr - %d\nISO Tx Thr - %d\n"
++					"Rx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n",
++					dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en,
++					dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len,
++					dthrctl.b.rx_thr_len);
++	}
++        dwc_otg_enable_device_interrupts( _core_if );        
++	{
++		diepmsk_data_t msk = {.d32 = 0};
++		msk.b.txfifoundrn = 1;
++		dwc_modify_reg32(&dev_if->dev_global_regs->diepmsk, msk.d32,msk.d32);
++}
++}
++
++/** 
++ * This function enables the Host mode interrupts.
++ *
++ * @param _core_if Programming view of DWC_otg controller
++ */
++void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *_core_if)
++{
++        dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs;
++	gintmsk_data_t intr_mask = {.d32 = 0};
++
++        DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
++
++        /* Disable all interrupts. */
++        dwc_write_reg32(&global_regs->gintmsk, 0);
++
++        /* Clear any pending interrupts. */
++        dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF); 
++
++        /* Enable the common interrupts */
++        dwc_otg_enable_common_interrupts(_core_if);
++
++	/*
++	 * Enable host mode interrupts without disturbing common
++	 * interrupts.
++	 */
++	intr_mask.b.sofintr = 1;
++	intr_mask.b.portintr = 1;
++	intr_mask.b.hcintr = 1;
++
++        //dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
++        //dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
++	dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
++}
++
++/** 
++ * This function disables the Host Mode interrupts.
++ *
++ * @param _core_if Programming view of DWC_otg controller
++ */
++void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *_core_if)
++{
++        dwc_otg_core_global_regs_t *global_regs =
++		_core_if->core_global_regs;
++	gintmsk_data_t intr_mask = {.d32 = 0};
++
++        DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__);
++         
++	/*
++	 * Disable host mode interrupts without disturbing common
++	 * interrupts.
++	 */
++	intr_mask.b.sofintr = 1;
++	intr_mask.b.portintr = 1;
++	intr_mask.b.hcintr = 1;
++        intr_mask.b.ptxfempty = 1;
++	intr_mask.b.nptxfempty = 1;
++        
++        dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
++}
++
++#if 0
++/* currently not used, keep it here as if needed later */
++static int phy_read(dwc_otg_core_if_t * _core_if, int addr)
++{
++	u32 val;
++	int timeout = 10;
++
++	dwc_write_reg32(&_core_if->core_global_regs->gpvndctl,
++			0x02000000 | (addr << 16));
++	val = dwc_read_reg32(&_core_if->core_global_regs->gpvndctl);
++	while (((val & 0x08000000) == 0) && (timeout--)) {
++		udelay(1000);
++		val = dwc_read_reg32(&_core_if->core_global_regs->gpvndctl);
++	}
++	val = dwc_read_reg32(&_core_if->core_global_regs->gpvndctl);
++	printk("%s: addr=%02x regval=%02x\n", __func__, addr, val & 0x000000ff);
++
++	return 0;
++}
++#endif
++
++/**
++ * This function initializes the DWC_otg controller registers for
++ * host mode.
++ *
++ * This function flushes the Tx and Rx FIFOs and it flushes any entries in the
++ * request queues. Host channels are reset to ensure that they are ready for
++ * performing transfers.
++ *
++ * @param _core_if Programming view of DWC_otg controller
++ *
++ */
++void dwc_otg_core_host_init(dwc_otg_core_if_t *_core_if)
++{
++        dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs;
++	dwc_otg_host_if_t 	*host_if = _core_if->host_if;
++        dwc_otg_core_params_t 	*params = _core_if->core_params;
++	hprt0_data_t 		hprt0 = {.d32 = 0};
++        fifosize_data_t 	nptxfifosize;
++        fifosize_data_t 	ptxfifosize;
++	int			i;
++	hcchar_data_t		hcchar;
++	hcfg_data_t		hcfg;
++	dwc_otg_hc_regs_t	*hc_regs;
++	int			num_channels;
++	gotgctl_data_t  gotgctl = {.d32 = 0};
++
++	DWC_DEBUGPL(DBG_CILV,"%s(%p)\n", __func__, _core_if);
++
++        /* Restart the Phy Clock */
++        dwc_write_reg32(_core_if->pcgcctl, 0);
++        
++	/* Initialize Host Configuration Register */
++	init_fslspclksel(_core_if);
++	if (_core_if->core_params->speed == DWC_SPEED_PARAM_FULL) {
++		hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg);
++		hcfg.b.fslssupp = 1;
++		dwc_write_reg32(&host_if->host_global_regs->hcfg, hcfg.d32);
++	}
++
++	/* Configure data FIFO sizes */
++	if (_core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
++                DWC_DEBUGPL(DBG_CIL,"Total FIFO Size=%d\n", _core_if->total_fifo_size);
++                DWC_DEBUGPL(DBG_CIL,"Rx FIFO Size=%d\n", params->host_rx_fifo_size);
++                DWC_DEBUGPL(DBG_CIL,"NP Tx FIFO Size=%d\n", params->host_nperio_tx_fifo_size);
++                DWC_DEBUGPL(DBG_CIL,"P Tx FIFO Size=%d\n", params->host_perio_tx_fifo_size);
++
++		/* Rx FIFO */
++		DWC_DEBUGPL(DBG_CIL,"initial grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz));
++		dwc_write_reg32(&global_regs->grxfsiz, params->host_rx_fifo_size);
++		DWC_DEBUGPL(DBG_CIL,"new grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz));
++
++		/* Non-periodic Tx FIFO */
++                DWC_DEBUGPL(DBG_CIL,"initial gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz));
++                nptxfifosize.b.depth  = params->host_nperio_tx_fifo_size;
++                nptxfifosize.b.startaddr = params->host_rx_fifo_size;
++                dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
++                DWC_DEBUGPL(DBG_CIL,"new gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz));
++		
++		/* Periodic Tx FIFO */
++                DWC_DEBUGPL(DBG_CIL,"initial hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz));
++                ptxfifosize.b.depth  = params->host_perio_tx_fifo_size;
++                ptxfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
++                dwc_write_reg32(&global_regs->hptxfsiz, ptxfifosize.d32);
++                DWC_DEBUGPL(DBG_CIL,"new hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz));
++	}
++
++        /* Clear Host Set HNP Enable in the OTG Control Register */
++        gotgctl.b.hstsethnpen = 1;
++        dwc_modify_reg32( &global_regs->gotgctl, gotgctl.d32, 0);
++
++	/* Make sure the FIFOs are flushed. */
++	dwc_otg_flush_tx_fifo(_core_if, 0x10 /* all Tx FIFOs */);
++	dwc_otg_flush_rx_fifo(_core_if);
++
++	/* Flush out any leftover queued requests. */
++	num_channels = _core_if->core_params->host_channels;
++	for (i = 0; i < num_channels; i++) {
++		hc_regs = _core_if->host_if->hc_regs[i];
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		hcchar.b.chen = 0;
++		hcchar.b.chdis = 1;
++		hcchar.b.epdir = 0;
++		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++	}
++	       
++	/* Halt all channels to put them into a known state. */
++	for (i = 0; i < num_channels; i++) {
++		int count = 0;
++		hc_regs = _core_if->host_if->hc_regs[i];
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		hcchar.b.chen = 1;
++		hcchar.b.chdis = 1;
++		hcchar.b.epdir = 0;
++		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++		DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d\n", __func__, i);
++		do {
++			hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++			if (++count > 200) {
++				DWC_ERROR("%s: Unable to clear halt on channel %d\n",
++					  __func__, i);
++				break;
++			}
++			udelay(100);
++		} while (hcchar.b.chen);
++	}
++
++	/* Turn on the vbus power. */
++        DWC_PRINT("Init: Port Power? op_state=%d\n", _core_if->op_state);
++        if (_core_if->op_state == A_HOST){   
++                hprt0.d32 = dwc_otg_read_hprt0(_core_if);
++                DWC_PRINT("Init: Power Port (%d)\n", hprt0.b.prtpwr);
++                if (hprt0.b.prtpwr == 0 ) {
++                        hprt0.b.prtpwr = 1;
++                        dwc_write_reg32(host_if->hprt0, hprt0.d32);
++                }  
++        }
++
++        dwc_otg_enable_host_interrupts( _core_if );
++}
++
++/**
++ * Prepares a host channel for transferring packets to/from a specific
++ * endpoint. The HCCHARn register is set up with the characteristics specified
++ * in _hc. Host channel interrupts that may need to be serviced while this
++ * transfer is in progress are enabled.
++ *
++ * @param _core_if Programming view of DWC_otg controller
++ * @param _hc Information needed to initialize the host channel
++ */
++void dwc_otg_hc_init(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
++{
++	uint32_t intr_enable;
++	hcintmsk_data_t hc_intr_mask;
++	gintmsk_data_t gintmsk = {.d32 = 0};
++	hcchar_data_t hcchar;
++	hcsplt_data_t hcsplt;
++
++	uint8_t hc_num = _hc->hc_num;
++	dwc_otg_host_if_t *host_if = _core_if->host_if;
++	dwc_otg_hc_regs_t *hc_regs = host_if->hc_regs[hc_num];
++
++	/* Clear old interrupt conditions for this host channel. */
++	hc_intr_mask.d32 = 0xFFFFFFFF;
++	hc_intr_mask.b.reserved = 0;
++	dwc_write_reg32(&hc_regs->hcint, hc_intr_mask.d32);
++
++	/* Enable channel interrupts required for this transfer. */
++	hc_intr_mask.d32 = 0;
++	hc_intr_mask.b.chhltd = 1;
++	if (_core_if->dma_enable) {
++		hc_intr_mask.b.ahberr = 1;
++		if (_hc->error_state && !_hc->do_split &&
++		    _hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
++			hc_intr_mask.b.ack = 1;
++			if (_hc->ep_is_in) {
++				hc_intr_mask.b.datatglerr = 1;
++				if (_hc->ep_type != DWC_OTG_EP_TYPE_INTR) {
++					hc_intr_mask.b.nak = 1;
++				}
++			}
++		}
++	} else {
++		switch (_hc->ep_type) {
++		case DWC_OTG_EP_TYPE_CONTROL:
++		case DWC_OTG_EP_TYPE_BULK:
++			hc_intr_mask.b.xfercompl = 1;
++			hc_intr_mask.b.stall = 1;
++			hc_intr_mask.b.xacterr = 1;
++			hc_intr_mask.b.datatglerr = 1;
++			if (_hc->ep_is_in) {
++				hc_intr_mask.b.bblerr = 1;
++			} else {
++				hc_intr_mask.b.nak = 1;
++				hc_intr_mask.b.nyet = 1;
++				if (_hc->do_ping) {
++					hc_intr_mask.b.ack = 1;
++				}
++			}
++
++			if (_hc->do_split) {
++				hc_intr_mask.b.nak = 1;
++				if (_hc->complete_split) {
++					hc_intr_mask.b.nyet = 1;
++				}
++				else {
++					hc_intr_mask.b.ack = 1;
++				}
++			}
++
++			if (_hc->error_state) {
++				hc_intr_mask.b.ack = 1;
++			}
++			break;
++		case DWC_OTG_EP_TYPE_INTR:
++			hc_intr_mask.b.xfercompl = 1;
++			hc_intr_mask.b.nak = 1;
++			hc_intr_mask.b.stall = 1;
++			hc_intr_mask.b.xacterr = 1;
++			hc_intr_mask.b.datatglerr = 1;
++			hc_intr_mask.b.frmovrun = 1;
++
++			if (_hc->ep_is_in) {
++				hc_intr_mask.b.bblerr = 1;
++			}
++			if (_hc->error_state) {
++				hc_intr_mask.b.ack = 1;
++			}
++			if (_hc->do_split) {
++				if (_hc->complete_split) {
++					hc_intr_mask.b.nyet = 1;
++				}
++				else {
++					hc_intr_mask.b.ack = 1;
++				}
++			}
++			break;
++		case DWC_OTG_EP_TYPE_ISOC:
++			hc_intr_mask.b.xfercompl = 1;
++			hc_intr_mask.b.frmovrun = 1;
++			hc_intr_mask.b.ack = 1;
++
++			if (_hc->ep_is_in) {
++				hc_intr_mask.b.xacterr = 1;
++				hc_intr_mask.b.bblerr = 1;
++			}
++			break;
++		}
++	}
++	dwc_write_reg32(&hc_regs->hcintmsk, hc_intr_mask.d32);
++
++	/* Enable the top level host channel interrupt. */
++	intr_enable = (1 << hc_num);
++	dwc_modify_reg32(&host_if->host_global_regs->haintmsk, 0, intr_enable);
++
++	/* Make sure host channel interrupts are enabled. */
++	gintmsk.b.hcintr = 1;
++	dwc_modify_reg32(&_core_if->core_global_regs->gintmsk, 0, gintmsk.d32);
++	
++	/*
++	 * Program the HCCHARn register with the endpoint characteristics for
++	 * the current transfer.
++	 */
++	hcchar.d32 = 0;
++	hcchar.b.devaddr = _hc->dev_addr;
++	hcchar.b.epnum = _hc->ep_num;
++	hcchar.b.epdir = _hc->ep_is_in;
++	hcchar.b.lspddev = (_hc->speed == DWC_OTG_EP_SPEED_LOW);
++	hcchar.b.eptype = _hc->ep_type;
++	hcchar.b.mps = _hc->max_packet;
++
++	dwc_write_reg32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32);
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num);
++	DWC_DEBUGPL(DBG_HCDV, "  Dev Addr: %d\n", hcchar.b.devaddr);
++	DWC_DEBUGPL(DBG_HCDV, "  Ep Num: %d\n", hcchar.b.epnum);
++	DWC_DEBUGPL(DBG_HCDV, "  Is In: %d\n", hcchar.b.epdir);
++	DWC_DEBUGPL(DBG_HCDV, "  Is Low Speed: %d\n", hcchar.b.lspddev);
++	DWC_DEBUGPL(DBG_HCDV, "  Ep Type: %d\n", hcchar.b.eptype);
++	DWC_DEBUGPL(DBG_HCDV, "  Max Pkt: %d\n", hcchar.b.mps);
++	DWC_DEBUGPL(DBG_HCDV, "  Multi Cnt: %d\n", hcchar.b.multicnt);
++
++	/*
++	 * Program the HCSPLIT register for SPLITs
++	 */
++	hcsplt.d32 = 0;
++	if (_hc->do_split) {
++		DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", _hc->hc_num,
++			   _hc->complete_split ? "CSPLIT" : "SSPLIT");
++		hcsplt.b.compsplt = _hc->complete_split;
++		hcsplt.b.xactpos = _hc->xact_pos;
++		hcsplt.b.hubaddr = _hc->hub_addr;
++		hcsplt.b.prtaddr = _hc->port_addr;
++		DWC_DEBUGPL(DBG_HCDV, "   comp split %d\n", _hc->complete_split);
++		DWC_DEBUGPL(DBG_HCDV, "   xact pos %d\n", _hc->xact_pos);
++		DWC_DEBUGPL(DBG_HCDV, "   hub addr %d\n", _hc->hub_addr);
++		DWC_DEBUGPL(DBG_HCDV, "   port addr %d\n", _hc->port_addr);
++		DWC_DEBUGPL(DBG_HCDV, "   is_in %d\n", _hc->ep_is_in);
++		DWC_DEBUGPL(DBG_HCDV, "   Max Pkt: %d\n", hcchar.b.mps);
++		DWC_DEBUGPL(DBG_HCDV, "   xferlen: %d\n", _hc->xfer_len);		
++	}
++	dwc_write_reg32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32);
++
++}
++
++/**
++ * Attempts to halt a host channel. This function should only be called in
++ * Slave mode or to abort a transfer in either Slave mode or DMA mode. Under
++ * normal circumstances in DMA mode, the controller halts the channel when the
++ * transfer is complete or a condition occurs that requires application
++ * intervention.
++ *
++ * In slave mode, checks for a free request queue entry, then sets the Channel
++ * Enable and Channel Disable bits of the Host Channel Characteristics
++ * register of the specified channel to intiate the halt. If there is no free
++ * request queue entry, sets only the Channel Disable bit of the HCCHARn
++ * register to flush requests for this channel. In the latter case, sets a
++ * flag to indicate that the host channel needs to be halted when a request
++ * queue slot is open.
++ *
++ * In DMA mode, always sets the Channel Enable and Channel Disable bits of the
++ * HCCHARn register. The controller ensures there is space in the request
++ * queue before submitting the halt request.
++ *
++ * Some time may elapse before the core flushes any posted requests for this
++ * host channel and halts. The Channel Halted interrupt handler completes the
++ * deactivation of the host channel.
++ *
++ * @param _core_if Controller register interface.
++ * @param _hc Host channel to halt.
++ * @param _halt_status Reason for halting the channel.
++ */
++void dwc_otg_hc_halt(dwc_otg_core_if_t *_core_if,
++		     dwc_hc_t *_hc,
++		     dwc_otg_halt_status_e _halt_status)
++{
++	gnptxsts_data_t 		nptxsts;
++	hptxsts_data_t			hptxsts;
++	hcchar_data_t 			hcchar;
++	dwc_otg_hc_regs_t 		*hc_regs;
++	dwc_otg_core_global_regs_t	*global_regs;
++	dwc_otg_host_global_regs_t	*host_global_regs;
++
++	hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
++	global_regs = _core_if->core_global_regs;
++	host_global_regs = _core_if->host_if->host_global_regs;
++
++	WARN_ON(_halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS);
++
++	if (_halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
++	    _halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
++		/*
++		 * Disable all channel interrupts except Ch Halted. The QTD
++		 * and QH state associated with this transfer has been cleared
++		 * (in the case of URB_DEQUEUE), so the channel needs to be
++		 * shut down carefully to prevent crashes.
++		 */
++		hcintmsk_data_t hcintmsk;
++		hcintmsk.d32 = 0;
++		hcintmsk.b.chhltd = 1;
++		dwc_write_reg32(&hc_regs->hcintmsk, hcintmsk.d32);
++
++		/*
++		 * Make sure no other interrupts besides halt are currently
++		 * pending. Handling another interrupt could cause a crash due
++		 * to the QTD and QH state.
++		 */
++		dwc_write_reg32(&hc_regs->hcint, ~hcintmsk.d32);
++
++		/*
++		 * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
++		 * even if the channel was already halted for some other
++		 * reason.
++		 */
++		_hc->halt_status = _halt_status;
++
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		if (hcchar.b.chen == 0) {
++			/*
++			 * The channel is either already halted or it hasn't
++			 * started yet. In DMA mode, the transfer may halt if
++			 * it finishes normally or a condition occurs that
++			 * requires driver intervention. Don't want to halt
++			 * the channel again. In either Slave or DMA mode,
++			 * it's possible that the transfer has been assigned
++			 * to a channel, but not started yet when an URB is
++			 * dequeued. Don't want to halt a channel that hasn't
++			 * started yet.
++			 */
++			return;
++		}
++	}
++
++	if (_hc->halt_pending) {
++		/*
++		 * A halt has already been issued for this channel. This might
++		 * happen when a transfer is aborted by a higher level in
++		 * the stack.
++		 */
++#ifdef DEBUG
++		DWC_PRINT("*** %s: Channel %d, _hc->halt_pending already set ***\n",
++			  __func__, _hc->hc_num);
++
++/* 		dwc_otg_dump_global_registers(_core_if); */
++/* 		dwc_otg_dump_host_registers(_core_if); */
++#endif		
++		return;
++	}
++
++        hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	hcchar.b.chen = 1;
++	hcchar.b.chdis = 1;
++
++	if (!_core_if->dma_enable) {
++		/* Check for space in the request queue to issue the halt. */
++		if (_hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
++		    _hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
++			nptxsts.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++			if (nptxsts.b.nptxqspcavail == 0) {
++				hcchar.b.chen = 0;
++			}
++		} else {
++			hptxsts.d32 = dwc_read_reg32(&host_global_regs->hptxsts);
++			if ((hptxsts.b.ptxqspcavail == 0) || (_core_if->queuing_high_bandwidth)) {
++				hcchar.b.chen = 0;
++			}
++		}
++	}
++
++	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++	_hc->halt_status = _halt_status;
++
++	if (hcchar.b.chen) {
++		_hc->halt_pending = 1;
++		_hc->halt_on_queue = 0;
++	} else {
++		_hc->halt_on_queue = 1;
++	}
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num);
++	DWC_DEBUGPL(DBG_HCDV, "  hcchar: 0x%08x\n", hcchar.d32);
++	DWC_DEBUGPL(DBG_HCDV, "  halt_pending: %d\n", _hc->halt_pending);
++	DWC_DEBUGPL(DBG_HCDV, "  halt_on_queue: %d\n", _hc->halt_on_queue);
++	DWC_DEBUGPL(DBG_HCDV, "  halt_status: %d\n", _hc->halt_status);
++
++	return;
++}
++
++/**
++ * Clears the transfer state for a host channel. This function is normally
++ * called after a transfer is done and the host channel is being released.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _hc Identifies the host channel to clean up.
++ */
++void dwc_otg_hc_cleanup(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
++{
++	dwc_otg_hc_regs_t *hc_regs;
++
++	_hc->xfer_started = 0;
++
++	/*
++	 * Clear channel interrupt enables and any unhandled channel interrupt
++	 * conditions.
++	 */
++	hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
++	dwc_write_reg32(&hc_regs->hcintmsk, 0);
++	dwc_write_reg32(&hc_regs->hcint, 0xFFFFFFFF);
++
++#ifdef DEBUG
++	del_timer(&_core_if->hc_xfer_timer[_hc->hc_num]);
++	{
++		hcchar_data_t hcchar;
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		if (hcchar.b.chdis) {
++			DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
++				 __func__, _hc->hc_num, hcchar.d32);
++		}
++	}
++#endif	
++}
++
++/**
++ * Sets the channel property that indicates in which frame a periodic transfer
++ * should occur. This is always set to the _next_ frame. This function has no
++ * effect on non-periodic transfers.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _hc Identifies the host channel to set up and its properties.
++ * @param _hcchar Current value of the HCCHAR register for the specified host
++ * channel.
++ */
++static inline void hc_set_even_odd_frame(dwc_otg_core_if_t *_core_if,
++					 dwc_hc_t *_hc,
++					 hcchar_data_t *_hcchar)
++{
++	if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++	    _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++		hfnum_data_t	hfnum;
++		hfnum.d32 = dwc_read_reg32(&_core_if->host_if->host_global_regs->hfnum);
++		/* 1 if _next_ frame is odd, 0 if it's even */
++		_hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1;
++#ifdef DEBUG
++		if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR && _hc->do_split && !_hc->complete_split) {
++			switch (hfnum.b.frnum & 0x7) {
++			case 7:
++				_core_if->hfnum_7_samples++;
++				_core_if->hfnum_7_frrem_accum += hfnum.b.frrem;
++				break;
++			case 0:
++				_core_if->hfnum_0_samples++;
++				_core_if->hfnum_0_frrem_accum += hfnum.b.frrem;
++				break;
++			default:
++				_core_if->hfnum_other_samples++;
++				_core_if->hfnum_other_frrem_accum += hfnum.b.frrem;
++				break;
++			}
++		}
++#endif		
++	}
++}
++
++#ifdef DEBUG
++static void hc_xfer_timeout(unsigned long _ptr)
++{
++	hc_xfer_info_t *xfer_info = (hc_xfer_info_t *)_ptr;
++	int hc_num = xfer_info->hc->hc_num;
++	DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num);
++	DWC_WARN("  start_hcchar_val 0x%08x\n", xfer_info->core_if->start_hcchar_val[hc_num]);
++}
++#endif
++
++/*
++ * This function does the setup for a data transfer for a host channel and
++ * starts the transfer. May be called in either Slave mode or DMA mode. In
++ * Slave mode, the caller must ensure that there is sufficient space in the
++ * request queue and Tx Data FIFO.
++ *
++ * For an OUT transfer in Slave mode, it loads a data packet into the
++ * appropriate FIFO. If necessary, additional data packets will be loaded in
++ * the Host ISR.
++ *
++ * For an IN transfer in Slave mode, a data packet is requested. The data
++ * packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
++ * additional data packets are requested in the Host ISR.
++ *
++ * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
++ * register along with a packet count of 1 and the channel is enabled. This
++ * causes a single PING transaction to occur. Other fields in HCTSIZ are
++ * simply set to 0 since no data transfer occurs in this case.
++ *
++ * For a PING transfer in DMA mode, the HCTSIZ register is initialized with
++ * all the information required to perform the subsequent data transfer. In
++ * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
++ * controller performs the entire PING protocol, then starts the data
++ * transfer.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _hc Information needed to initialize the host channel. The xfer_len
++ * value may be reduced to accommodate the max widths of the XferSize and
++ * PktCnt fields in the HCTSIZn register. The multi_count value may be changed
++ * to reflect the final xfer_len value.
++ */
++void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
++{
++	hcchar_data_t hcchar;
++	hctsiz_data_t hctsiz;
++	uint16_t num_packets;
++	uint32_t max_hc_xfer_size = _core_if->core_params->max_transfer_size;
++	uint16_t max_hc_pkt_count = _core_if->core_params->max_packet_count;
++	dwc_otg_hc_regs_t *hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
++
++	hctsiz.d32 = 0;
++
++	if (_hc->do_ping) {
++		if (!_core_if->dma_enable) {
++			dwc_otg_hc_do_ping(_core_if, _hc);
++			_hc->xfer_started = 1;
++			return;
++		} else {
++			hctsiz.b.dopng = 1;
++		}
++	}
++
++	if (_hc->do_split) {
++		num_packets = 1;
++
++		if (_hc->complete_split && !_hc->ep_is_in) {
++			/* For CSPLIT OUT Transfer, set the size to 0 so the
++			 * core doesn't expect any data written to the FIFO */
++			_hc->xfer_len = 0;
++		} else if (_hc->ep_is_in || (_hc->xfer_len > _hc->max_packet)) {
++			_hc->xfer_len = _hc->max_packet;
++		} else if (!_hc->ep_is_in && (_hc->xfer_len > 188)) {
++			_hc->xfer_len = 188;
++		}
++
++		hctsiz.b.xfersize = _hc->xfer_len;
++	} else {
++		/*
++		 * Ensure that the transfer length and packet count will fit
++		 * in the widths allocated for them in the HCTSIZn register.
++		 */
++		if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++		    _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++			/*
++			 * Make sure the transfer size is no larger than one
++			 * (micro)frame's worth of data. (A check was done
++			 * when the periodic transfer was accepted to ensure
++			 * that a (micro)frame's worth of data can be
++			 * programmed into a channel.)
++			 */
++			uint32_t max_periodic_len = _hc->multi_count * _hc->max_packet;
++			if (_hc->xfer_len > max_periodic_len) {
++				_hc->xfer_len = max_periodic_len;
++			} else {
++			}
++		} else if (_hc->xfer_len > max_hc_xfer_size) {
++			/* Make sure that xfer_len is a multiple of max packet size. */
++			_hc->xfer_len = max_hc_xfer_size - _hc->max_packet + 1;
++		}
++
++		if (_hc->xfer_len > 0) {
++			num_packets = (_hc->xfer_len + _hc->max_packet - 1) / _hc->max_packet;
++			if (num_packets > max_hc_pkt_count) {
++				num_packets = max_hc_pkt_count;
++				_hc->xfer_len = num_packets * _hc->max_packet;
++			}
++		} else {
++			/* Need 1 packet for transfer length of 0. */
++			num_packets = 1;
++		}
++
++		if (_hc->ep_is_in) {
++			/* Always program an integral # of max packets for IN transfers. */
++			_hc->xfer_len = num_packets * _hc->max_packet;
++		}
++
++		if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++		    _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++			/*
++			 * Make sure that the multi_count field matches the
++			 * actual transfer length.
++			 */
++			_hc->multi_count = num_packets;
++
++		}
++
++		if (_hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++			/* Set up the initial PID for the transfer. */
++			if (_hc->speed == DWC_OTG_EP_SPEED_HIGH) {
++				if (_hc->ep_is_in) {
++					if (_hc->multi_count == 1) {
++						_hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
++					} else if (_hc->multi_count == 2) {
++						_hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
++					} else {
++						_hc->data_pid_start = DWC_OTG_HC_PID_DATA2;
++					}
++				} else {
++					if (_hc->multi_count == 1) {
++						_hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
++					} else {
++						_hc->data_pid_start = DWC_OTG_HC_PID_MDATA;
++					}
++				}
++			} else {
++				_hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
++			}
++		}
++
++		hctsiz.b.xfersize = _hc->xfer_len;
++	}
++
++	_hc->start_pkt_count = num_packets;
++	hctsiz.b.pktcnt = num_packets;
++	hctsiz.b.pid = _hc->data_pid_start;
++	dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num);
++	DWC_DEBUGPL(DBG_HCDV, "  Xfer Size: %d\n", hctsiz.b.xfersize);
++	DWC_DEBUGPL(DBG_HCDV, "  Num Pkts: %d\n", hctsiz.b.pktcnt);
++	DWC_DEBUGPL(DBG_HCDV, "  Start PID: %d\n", hctsiz.b.pid);
++
++	if (_core_if->dma_enable) {
++#ifdef DEBUG
++if(((uint32_t)_hc->xfer_buff)%4)
++printk("dwc_otg_hc_start_transfer _hc->xfer_buff not 4 byte alignment\n");
++#endif
++		dwc_write_reg32(&hc_regs->hcdma, (uint32_t)_hc->xfer_buff);
++	}
++
++	/* Start the split */
++	if (_hc->do_split) {
++		hcsplt_data_t hcsplt;
++		hcsplt.d32 = dwc_read_reg32 (&hc_regs->hcsplt);
++		hcsplt.b.spltena = 1;
++		dwc_write_reg32(&hc_regs->hcsplt, hcsplt.d32);
++	}
++
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	hcchar.b.multicnt = _hc->multi_count;
++	hc_set_even_odd_frame(_core_if, _hc, &hcchar);
++#ifdef DEBUG
++	_core_if->start_hcchar_val[_hc->hc_num] = hcchar.d32;
++	if (hcchar.b.chdis) {
++		DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
++			 __func__, _hc->hc_num, hcchar.d32);
++	}
++#endif	
++
++	/* Set host channel enable after all other setup is complete. */
++	hcchar.b.chen = 1;
++	hcchar.b.chdis = 0;
++	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++	_hc->xfer_started = 1;
++	_hc->requests++;
++
++	if (!_core_if->dma_enable && !_hc->ep_is_in && _hc->xfer_len > 0) {
++		/* Load OUT packet into the appropriate Tx FIFO. */
++		dwc_otg_hc_write_packet(_core_if, _hc);
++	}
++
++#ifdef DEBUG
++	/* Start a timer for this transfer. */
++	_core_if->hc_xfer_timer[_hc->hc_num].function = hc_xfer_timeout;
++	_core_if->hc_xfer_info[_hc->hc_num].core_if = _core_if;
++	_core_if->hc_xfer_info[_hc->hc_num].hc = _hc;
++	_core_if->hc_xfer_timer[_hc->hc_num].data = (unsigned long)(&_core_if->hc_xfer_info[_hc->hc_num]);
++	_core_if->hc_xfer_timer[_hc->hc_num].expires = jiffies + (HZ*10);
++	add_timer(&_core_if->hc_xfer_timer[_hc->hc_num]);
++#endif
++}
++
++/**
++ * This function continues a data transfer that was started by previous call
++ * to <code>dwc_otg_hc_start_transfer</code>. The caller must ensure there is
++ * sufficient space in the request queue and Tx Data FIFO. This function
++ * should only be called in Slave mode. In DMA mode, the controller acts
++ * autonomously to complete transfers programmed to a host channel.
++ *
++ * For an OUT transfer, a new data packet is loaded into the appropriate FIFO
++ * if there is any data remaining to be queued. For an IN transfer, another
++ * data packet is always requested. For the SETUP phase of a control transfer,
++ * this function does nothing.
++ *
++ * @return 1 if a new request is queued, 0 if no more requests are required
++ * for this transfer.
++ */
++int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
++{
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num);
++
++	if (_hc->do_split) {
++		/* SPLITs always queue just once per channel */
++		return 0;
++	} else if (_hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
++		/* SETUPs are queued only once since they can't be NAKed. */
++		return 0;
++	} else if (_hc->ep_is_in) {
++		/*
++		 * Always queue another request for other IN transfers. If
++		 * back-to-back INs are issued and NAKs are received for both,
++		 * the driver may still be processing the first NAK when the
++		 * second NAK is received. When the interrupt handler clears
++		 * the NAK interrupt for the first NAK, the second NAK will
++		 * not be seen. So we can't depend on the NAK interrupt
++		 * handler to requeue a NAKed request. Instead, IN requests
++		 * are issued each time this function is called. When the
++		 * transfer completes, the extra requests for the channel will
++		 * be flushed.
++		 */
++		hcchar_data_t hcchar;
++		dwc_otg_hc_regs_t *hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
++
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		hc_set_even_odd_frame(_core_if, _hc, &hcchar);
++		hcchar.b.chen = 1;
++		hcchar.b.chdis = 0;
++		DWC_DEBUGPL(DBG_HCDV, "  IN xfer: hcchar = 0x%08x\n", hcchar.d32);
++		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++		_hc->requests++;
++		return 1;
++	} else {
++		/* OUT transfers. */
++		if (_hc->xfer_count < _hc->xfer_len) {
++			if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++			    _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++				hcchar_data_t hcchar;
++				dwc_otg_hc_regs_t *hc_regs;
++				hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
++				hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++				hc_set_even_odd_frame(_core_if, _hc, &hcchar);
++			}
++
++			/* Load OUT packet into the appropriate Tx FIFO. */
++			dwc_otg_hc_write_packet(_core_if, _hc);
++			_hc->requests++;
++			return 1;
++		} else {
++			return 0;
++		}
++	}
++}
++
++/**
++ * Starts a PING transfer. This function should only be called in Slave mode.
++ * The Do Ping bit is set in the HCTSIZ register, then the channel is enabled.
++ */
++void dwc_otg_hc_do_ping(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
++{
++	hcchar_data_t hcchar;
++	hctsiz_data_t hctsiz;
++	dwc_otg_hc_regs_t *hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num);
++
++	hctsiz.d32 = 0;
++	hctsiz.b.dopng = 1;
++	hctsiz.b.pktcnt = 1;
++	dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	hcchar.b.chen = 1;
++	hcchar.b.chdis = 0;
++	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++}
++
++/*
++ * This function writes a packet into the Tx FIFO associated with the Host
++ * Channel. For a channel associated with a non-periodic EP, the non-periodic
++ * Tx FIFO is written. For a channel associated with a periodic EP, the
++ * periodic Tx FIFO is written. This function should only be called in Slave
++ * mode.
++ *
++ * Upon return the xfer_buff and xfer_count fields in _hc are incremented by
++ * then number of bytes written to the Tx FIFO.
++ */
++void dwc_otg_hc_write_packet(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
++{
++	uint32_t i;
++	uint32_t remaining_count;
++	uint32_t byte_count;
++	uint32_t dword_count;
++
++	uint32_t *data_buff = (uint32_t *)(_hc->xfer_buff);
++	uint32_t *data_fifo = _core_if->data_fifo[_hc->hc_num];
++
++	remaining_count = _hc->xfer_len - _hc->xfer_count;
++	if (remaining_count > _hc->max_packet) {
++		byte_count = _hc->max_packet;
++	} else {
++		byte_count = remaining_count;
++	}
++
++	dword_count = (byte_count + 3) / 4;
++
++	if ((((unsigned long)data_buff) & 0x3) == 0) {
++		/* xfer_buff is DWORD aligned. */
++		for (i = 0; i < dword_count; i++, data_buff++) {
++			dwc_write_reg32(data_fifo, *data_buff);
++		}
++	} else {
++		/* xfer_buff is not DWORD aligned. */
++		for (i = 0; i < dword_count; i++, data_buff++) {
++			dwc_write_reg32(data_fifo, get_unaligned(data_buff));
++		}
++	}
++
++	_hc->xfer_count += byte_count;
++	_hc->xfer_buff += byte_count;
++}
++
++/**
++ * Gets the current USB frame number. This is the frame number from the last 
++ * SOF packet.  
++ */
++uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *_core_if)
++{
++	dsts_data_t dsts;
++	dsts.d32 = dwc_read_reg32(&_core_if->dev_if->dev_global_regs->dsts);
++
++	/* read current frame/microfreme number from DSTS register */
++	return dsts.b.soffn;
++}
++
++/**
++ * This function reads a setup packet from the Rx FIFO into the destination 
++ * buffer.  This function is called from the Rx Status Queue Level (RxStsQLvl)
++ * Interrupt routine when a SETUP packet has been received in Slave mode.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _dest Destination buffer for packet data.
++ */
++void dwc_otg_read_setup_packet(dwc_otg_core_if_t *_core_if, uint32_t *_dest)
++{
++	/* Get the 8 bytes of a setup transaction data */
++
++	/* Pop 2 DWORDS off the receive data FIFO into memory */
++	_dest[0] = dwc_read_reg32(_core_if->data_fifo[0]);
++	_dest[1] = dwc_read_reg32(_core_if->data_fifo[0]);
++    //_dest[0] = dwc_read_datafifo32(_core_if->data_fifo[0]);
++	//_dest[1] = dwc_read_datafifo32(_core_if->data_fifo[0]);
++}
++
++
++/**
++ * This function enables EP0 OUT to receive SETUP packets and configures EP0 
++ * IN for transmitting packets.  It is normally called when the
++ * "Enumeration Done" interrupt occurs.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _ep The EP0 data.
++ */
++void dwc_otg_ep0_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
++{
++        dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
++	dsts_data_t dsts;
++	depctl_data_t diepctl;
++	depctl_data_t doepctl;
++	dctl_data_t dctl ={.d32=0};        
++
++	/* Read the Device Status and Endpoint 0 Control registers */
++	dsts.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dsts);
++	diepctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl);
++	doepctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl);
++
++	/* Set the MPS of the IN EP based on the enumeration speed */
++	switch (dsts.b.enumspd) {
++	case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
++	case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
++	case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
++		diepctl.b.mps = DWC_DEP0CTL_MPS_64;
++		break;
++	case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
++		diepctl.b.mps = DWC_DEP0CTL_MPS_8;
++		break;
++	}
++
++	dwc_write_reg32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32);
++
++	/* Enable OUT EP for receive */
++	doepctl.b.epena = 1;
++	dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);
++
++#ifdef VERBOSE
++        DWC_DEBUGPL(DBG_PCDV,"doepctl0=%0x\n", 
++                    dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl));
++        DWC_DEBUGPL(DBG_PCDV,"diepctl0=%0x\n", 
++                    dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl));        
++#endif
++        dctl.b.cgnpinnak = 1;
++        dwc_modify_reg32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
++        DWC_DEBUGPL(DBG_PCDV,"dctl=%0x\n", 
++                    dwc_read_reg32(&dev_if->dev_global_regs->dctl));
++}
++
++/**
++ * This function activates an EP.  The Device EP control register for
++ * the EP is configured as defined in the ep structure.  Note: This
++ * function is not used for EP0.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _ep The EP to activate.
++ */
++void dwc_otg_ep_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
++{
++        dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
++	depctl_data_t depctl;
++	volatile uint32_t *addr;
++        daint_data_t daintmsk = {.d32=0};
++
++        DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, _ep->num, 
++                    (_ep->is_in?"IN":"OUT"));
++        
++	/* Read DEPCTLn register */
++	if (_ep->is_in == 1) {
++		addr = &dev_if->in_ep_regs[_ep->num]->diepctl;
++                daintmsk.ep.in = 1<<_ep->num;
++        } else {
++		addr = &dev_if->out_ep_regs[_ep->num]->doepctl;
++                daintmsk.ep.out = 1<<_ep->num;
++	}
++        
++        /* If the EP is already active don't change the EP Control
++         * register. */
++        depctl.d32 = dwc_read_reg32(addr);
++	if (!depctl.b.usbactep) {
++                depctl.b.mps = _ep->maxpacket;
++                depctl.b.eptype = _ep->type;
++                depctl.b.txfnum = _ep->tx_fifo_num;
++                
++                if (_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++			depctl.b.setd0pid = 1;	// ???
++                } else {
++                        depctl.b.setd0pid = 1;
++                }
++                depctl.b.usbactep = 1;
++
++                dwc_write_reg32(addr, depctl.d32);
++                DWC_DEBUGPL(DBG_PCDV,"DEPCTL=%08x\n", dwc_read_reg32(addr));
++        }
++        
++
++        /* Enable the Interrupt for this EP */
++        dwc_modify_reg32(&dev_if->dev_global_regs->daintmsk,
++                         0, daintmsk.d32);
++        DWC_DEBUGPL(DBG_PCDV,"DAINTMSK=%0x\n", 
++                    dwc_read_reg32(&dev_if->dev_global_regs->daintmsk));
++	_ep->stall_clear_flag = 0;
++	return;
++}
++
++/**
++ * This function deactivates an EP.  This is done by clearing the USB Active 
++ * EP bit in the Device EP control register.  Note: This function is not used 
++ * for EP0. EP0 cannot be deactivated.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _ep The EP to deactivate.
++ */
++void dwc_otg_ep_deactivate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
++{
++	depctl_data_t depctl ={.d32 = 0};
++	volatile uint32_t *addr;
++        daint_data_t daintmsk = {.d32=0};
++        
++	/* Read DEPCTLn register */
++	if (_ep->is_in == 1) {
++		addr = &_core_if->dev_if->in_ep_regs[_ep->num]->diepctl;
++                daintmsk.ep.in = 1<<_ep->num;
++	} else {
++		addr = &_core_if->dev_if->out_ep_regs[_ep->num]->doepctl;
++                daintmsk.ep.out = 1<<_ep->num;
++	}
++
++	depctl.b.usbactep = 0;
++	dwc_write_reg32(addr, depctl.d32);
++
++        /* Disable the Interrupt for this EP */
++        dwc_modify_reg32(&_core_if->dev_if->dev_global_regs->daintmsk,
++                         daintmsk.d32, 0);
++
++	return;
++}
++
++/**
++ * This function does the setup for a data transfer for an EP and
++ * starts the transfer.  For an IN transfer, the packets will be
++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
++ * the packets are unloaded from the Rx FIFO in the ISR.  the ISR.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _ep The EP to start the transfer on.
++ */
++void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
++{
++        /** @todo Refactor this funciton to check the transfer size
++         * count value does not execed the number bits in the Transfer
++         * count register. */
++	depctl_data_t depctl;
++	deptsiz_data_t deptsiz;
++        gintmsk_data_t intr_mask = { .d32 = 0};
++
++#ifdef CHECK_PACKET_COUNTER_WIDTH
++        const uint32_t MAX_XFER_SIZE = 
++                _core_if->core_params->max_transfer_size;
++        const uint32_t MAX_PKT_COUNT = 
++                _core_if->core_params->max_packet_count;
++        uint32_t num_packets;
++        uint32_t transfer_len;
++        dwc_otg_dev_out_ep_regs_t *out_regs = 
++                _core_if->dev_if->out_ep_regs[_ep->num];
++        dwc_otg_dev_in_ep_regs_t *in_regs = 
++                _core_if->dev_if->in_ep_regs[_ep->num];
++        gnptxsts_data_t txstatus;
++
++        int lvl = SET_DEBUG_LEVEL(DBG_PCD);
++
++        
++        DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
++                    "xfer_buff=%p start_xfer_buff=%p\n",
++                    _ep->num, (_ep->is_in?"IN":"OUT"), _ep->xfer_len, 
++                    _ep->xfer_count, _ep->xfer_buff, _ep->start_xfer_buff);
++
++        transfer_len = _ep->xfer_len - _ep->xfer_count;
++        if (transfer_len > MAX_XFER_SIZE) {
++                transfer_len = MAX_XFER_SIZE;
++        }
++        if (transfer_len == 0) {
++                num_packets = 1;
++                /* OUT EP to recieve Zero-length packet set transfer
++                 * size to maxpacket size. */
++                if (!_ep->is_in) {
++                        transfer_len = _ep->maxpacket;                
++                }
++        } else {
++                num_packets = 
++                        (transfer_len + _ep->maxpacket - 1) / _ep->maxpacket;
++                if (num_packets > MAX_PKT_COUNT) {
++                        num_packets = MAX_PKT_COUNT;
++                }
++        }
++        DWC_DEBUGPL(DBG_PCD, "transfer_len=%d #pckt=%d\n", transfer_len, 
++                    num_packets);
++
++        deptsiz.b.xfersize = transfer_len;
++        deptsiz.b.pktcnt = num_packets;
++
++	/* IN endpoint */
++	if (_ep->is_in == 1) {
++		depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
++        } else {/* OUT endpoint */
++                depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
++        }
++        
++        /* EP enable, IN data in FIFO */
++        depctl.b.cnak = 1;
++        depctl.b.epena = 1;
++	/* IN endpoint */
++	if (_ep->is_in == 1) {
++                txstatus.d32 = 
++                        dwc_read_reg32(&_core_if->core_global_regs->gnptxsts);
++                if (txstatus.b.nptxqspcavail == 0) {
++                        DWC_DEBUGPL(DBG_ANY, "TX Queue Full (0x%0x)\n", 
++                                    txstatus.d32);
++                        return;
++                }
++                dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++		dwc_write_reg32(&in_regs->diepctl, depctl.d32);
++                /** 
++                 * Enable the Non-Periodic Tx FIFO empty interrupt, the
++                 * data will be written into the fifo by the ISR.
++                 */ 
++                if (_core_if->dma_enable) {
++			dwc_write_reg32(&in_regs->diepdma, (uint32_t) _ep->xfer_buff);
++		} else {
++			if (_core_if->en_multiple_tx_fifo == 0) {
++                        intr_mask.b.nptxfempty = 1;
++                        dwc_modify_reg32( &_core_if->core_global_regs->gintsts,
++                                          intr_mask.d32, 0);
++                        dwc_modify_reg32( &_core_if->core_global_regs->gintmsk,
++                                          intr_mask.d32, intr_mask.d32);
++			} else {
++			    /* Enable the Tx FIFO Empty Interrupt for this EP */
++			    if (_ep->xfer_len > 0 &&
++					 _ep->type != DWC_OTG_EP_TYPE_ISOC) {
++					uint32_t fifoemptymsk = 0;
++					fifoemptymsk = (0x1 << _ep->num);
++					dwc_modify_reg32(&_core_if->dev_if->dev_global_regs->
++							dtknqr4_fifoemptymsk,0, fifoemptymsk);
++                }
++			}
++		}
++	} else {	    /* OUT endpoint */
++		dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++		dwc_write_reg32(&out_regs->doepctl, depctl.d32);
++                if (_core_if->dma_enable) {
++			dwc_write_reg32(&out_regs->doepdma,(uint32_t) _ep->xfer_buff);
++		}
++        }
++        DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n", 
++                    dwc_read_reg32(&out_regs->doepctl),
++                    dwc_read_reg32(&out_regs->doeptsiz));
++        DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n", 
++                    dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daintmsk),
++                    dwc_read_reg32(&_core_if->core_global_regs->gintmsk));        
++
++        SET_DEBUG_LEVEL(lvl);
++#endif
++        DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
++        
++        DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
++                    "xfer_buff=%p start_xfer_buff=%p\n",
++                    _ep->num, (_ep->is_in?"IN":"OUT"), _ep->xfer_len, 
++                    _ep->xfer_count, _ep->xfer_buff, _ep->start_xfer_buff);
++
++	/* IN endpoint */
++	if (_ep->is_in == 1) {
++		dwc_otg_dev_in_ep_regs_t * in_regs = _core_if->dev_if->in_ep_regs[_ep->num];
++		gnptxsts_data_t gtxstatus;
++		gtxstatus.d32 = dwc_read_reg32(&_core_if->core_global_regs->gnptxsts);
++		if (_core_if->en_multiple_tx_fifo == 0 &&
++			gtxstatus.b.nptxqspcavail == 0) {
++#ifdef DEBUG
++                        DWC_PRINT("TX Queue Full (0x%0x)\n", gtxstatus.d32);
++#endif
++                        //return;
++                        MDELAY(100); //james
++                }
++                
++		depctl.d32 = dwc_read_reg32(&(in_regs->diepctl));
++		deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz));
++
++                /* Zero Length Packet? */
++                if (_ep->xfer_len == 0) {
++                        deptsiz.b.xfersize = 0;
++                        deptsiz.b.pktcnt = 1;
++                } else {
++                        
++                        /* Program the transfer size and packet count
++                         *  as follows: xfersize = N * maxpacket +
++                         *  short_packet pktcnt = N + (short_packet
++                         *  exist ? 1 : 0)  
++                         */
++                        deptsiz.b.xfersize = _ep->xfer_len;
++			deptsiz.b.pktcnt = (_ep->xfer_len - 1 + _ep->maxpacket) / _ep->maxpacket;
++		}
++
++                dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++
++		/* Write the DMA register */
++		if (_core_if->dma_enable) {
++#if 1 // winder
++			dma_cache_wback_inv((unsigned long) _ep->xfer_buff, _ep->xfer_len); // winder
++			dwc_write_reg32 (&(in_regs->diepdma), 
++					 CPHYSADDR((uint32_t)_ep->xfer_buff)); // winder
++#else
++                        dwc_write_reg32 (&(in_regs->diepdma),
++				         (uint32_t)_ep->dma_addr);
++#endif
++		} else {
++			if (_ep->type != DWC_OTG_EP_TYPE_ISOC) {
++			/** 
++			 * Enable the Non-Periodic Tx FIFO empty interrupt,
++				 * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
++			 * the data will be written into the fifo by the ISR.
++			 */ 
++			    if (_core_if->en_multiple_tx_fifo == 0) {
++                        intr_mask.b.nptxfempty = 1;
++                        dwc_modify_reg32( &_core_if->core_global_regs->gintsts,
++                                          intr_mask.d32, 0);
++                        dwc_modify_reg32( &_core_if->core_global_regs->gintmsk,
++                                          intr_mask.d32, intr_mask.d32);
++				} else {
++				    /* Enable the Tx FIFO Empty Interrupt for this EP */
++				    if (_ep->xfer_len > 0) {
++						uint32_t fifoemptymsk = 0;
++						fifoemptymsk = 1 << _ep->num;
++						dwc_modify_reg32(&_core_if->dev_if->dev_global_regs->
++								  dtknqr4_fifoemptymsk,0,fifoemptymsk);
++					}
++				}
++			}
++                }
++                
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		dwc_write_reg32(&in_regs->diepctl, depctl.d32);
++
++		if (_core_if->dma_enable) {
++		depctl.d32 = dwc_read_reg32 (&_core_if->dev_if->in_ep_regs[0]->diepctl);
++		depctl.b.nextep = _ep->num;
++		dwc_write_reg32 (&_core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32);
++
++		}
++	} else {
++                /* OUT endpoint */
++	    dwc_otg_dev_out_ep_regs_t * out_regs = _core_if->dev_if->out_ep_regs[_ep->num];
++
++		depctl.d32 = dwc_read_reg32(&(out_regs->doepctl));
++		deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz));
++
++		/* Program the transfer size and packet count as follows:
++                 * 
++		 *  pktcnt = N                                         
++		 *  xfersize = N * maxpacket
++                 */
++                if (_ep->xfer_len == 0) {
++                        /* Zero Length Packet */
++                        deptsiz.b.xfersize = _ep->maxpacket;
++                        deptsiz.b.pktcnt = 1;
++                } else {
++			deptsiz.b.pktcnt = (_ep->xfer_len + (_ep->maxpacket - 1)) / _ep->maxpacket;
++                        deptsiz.b.xfersize = deptsiz.b.pktcnt * _ep->maxpacket;
++                }
++		dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++
++                DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n",
++			      _ep->num, deptsiz.b.xfersize, deptsiz.b.pktcnt);
++
++		if (_core_if->dma_enable) {
++#if 1 // winder
++			dwc_write_reg32 (&(out_regs->doepdma), 
++					 CPHYSADDR((uint32_t)_ep->xfer_buff)); // winder
++#else
++			dwc_write_reg32 (&(out_regs->doepdma), 
++					 (uint32_t)_ep->dma_addr);
++#endif
++		}
++
++		if (_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++                        /** @todo NGS: dpid is read-only. Use setd0pid
++                         * or setd1pid. */
++			if (_ep->even_odd_frame) {
++				depctl.b.setd1pid = 1;
++			} else {
++				depctl.b.setd0pid = 1;
++			}
++		}
++
++		/* EP enable */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++
++		dwc_write_reg32(&out_regs->doepctl, depctl.d32);
++
++                DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n", 
++                            dwc_read_reg32(&out_regs->doepctl),
++                            dwc_read_reg32(&out_regs->doeptsiz));
++                DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n", 
++                            dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daintmsk),
++                            dwc_read_reg32(&_core_if->core_global_regs->gintmsk));        
++	}
++}
++
++
++/**
++ * This function does the setup for a data transfer for EP0 and starts
++ * the transfer.  For an IN transfer, the packets will be loaded into
++ * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are
++ * unloaded from the Rx FIFO in the ISR.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _ep The EP0 data.
++ */
++void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
++{
++	volatile depctl_data_t depctl;
++	volatile deptsiz0_data_t deptsiz;
++        gintmsk_data_t intr_mask = { .d32 = 0};
++
++        DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
++                    "xfer_buff=%p start_xfer_buff=%p total_len=%d\n",
++                    _ep->num, (_ep->is_in?"IN":"OUT"), _ep->xfer_len, 
++                    _ep->xfer_count, _ep->xfer_buff, _ep->start_xfer_buff,
++                    _ep->total_len);
++        _ep->total_len = _ep->xfer_len;
++
++	/* IN endpoint */
++	if (_ep->is_in == 1) {
++		dwc_otg_dev_in_ep_regs_t * in_regs = _core_if->dev_if->in_ep_regs[0];
++		gnptxsts_data_t gtxstatus;
++		gtxstatus.d32 = dwc_read_reg32(&_core_if->core_global_regs->gnptxsts);
++		if (_core_if->en_multiple_tx_fifo == 0 &&
++			gtxstatus.b.nptxqspcavail == 0) {
++#ifdef DEBUG
++                        deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
++                        DWC_DEBUGPL(DBG_PCD,"DIEPCTL0=%0x\n", 
++                                    dwc_read_reg32(&in_regs->diepctl));
++                        DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n", 
++				     deptsiz.d32, deptsiz.b.xfersize,deptsiz.b.pktcnt);
++			DWC_PRINT("TX Queue or FIFO Full (0x%0x)\n", gtxstatus.d32);
++#endif	/*  */
++                        			printk("TX Queue or FIFO Full!!!!\n"); // test-only
++                        //return;
++                        MDELAY(100); //james
++                }
++
++                depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
++		deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
++
++                /* Zero Length Packet? */
++                if (_ep->xfer_len == 0) {
++                        deptsiz.b.xfersize = 0;
++                        deptsiz.b.pktcnt = 1;
++                } else {
++                        /* Program the transfer size and packet count
++                         *  as follows: xfersize = N * maxpacket +
++                         *  short_packet pktcnt = N + (short_packet
++                         *  exist ? 1 : 0)  
++                         */
++			if (_ep->xfer_len > _ep->maxpacket) {
++				_ep->xfer_len = _ep->maxpacket;
++				deptsiz.b.xfersize = _ep->maxpacket;
++			}
++			else {
++				deptsiz.b.xfersize = _ep->xfer_len;
++			}
++                        deptsiz.b.pktcnt = 1;
++
++		}
++                dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++                DWC_DEBUGPL(DBG_PCDV, "IN len=%d  xfersize=%d pktcnt=%d [%08x]\n",
++			     _ep->xfer_len, deptsiz.b.xfersize,deptsiz.b.pktcnt, deptsiz.d32);
++
++		/* Write the DMA register */
++		if (_core_if->dma_enable) {
++			dwc_write_reg32(&(in_regs->diepdma), (uint32_t) _ep->dma_addr);
++		}
++
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		dwc_write_reg32(&in_regs->diepctl, depctl.d32);
++
++                /** 
++                 * Enable the Non-Periodic Tx FIFO empty interrupt, the
++                 * data will be written into the fifo by the ISR.
++                 */ 
++                if (!_core_if->dma_enable) {
++			if (_core_if->en_multiple_tx_fifo == 0) {
++                        intr_mask.b.nptxfempty = 1;
++				dwc_modify_reg32(&_core_if->core_global_regs->gintsts, intr_mask.d32, 0);
++				dwc_modify_reg32(&_core_if->core_global_regs->gintmsk, intr_mask.d32,
++						  intr_mask.d32);
++			} else {
++			    /* Enable the Tx FIFO Empty Interrupt for this EP */
++			    if (_ep->xfer_len > 0) {
++					uint32_t fifoemptymsk = 0;
++					fifoemptymsk |= 1 << _ep->num;
++					dwc_modify_reg32(&_core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++						 0, fifoemptymsk);
++                }
++                
++			}
++		}
++	} else {
++	    /* OUT endpoint */
++	    dwc_otg_dev_out_ep_regs_t * out_regs = _core_if->dev_if->out_ep_regs[_ep->num];
++
++		depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
++		deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz);
++
++		/* Program the transfer size and packet count as follows:
++		 *  xfersize = N * (maxpacket + 4 - (maxpacket % 4))
++		 *  pktcnt = N                                          */
++                if (_ep->xfer_len == 0) {
++                        /* Zero Length Packet */
++                        deptsiz.b.xfersize = _ep->maxpacket;
++                        deptsiz.b.pktcnt = 1;
++                } else {
++			deptsiz.b.pktcnt = (_ep->xfer_len + (_ep->maxpacket - 1)) / _ep->maxpacket;
++                        deptsiz.b.xfersize = deptsiz.b.pktcnt * _ep->maxpacket;
++                }
++                
++		dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++                DWC_DEBUGPL(DBG_PCDV, "len=%d  xfersize=%d pktcnt=%d\n",
++			     _ep->xfer_len, deptsiz.b.xfersize,deptsiz.b.pktcnt);
++
++		if (_core_if->dma_enable) {
++			dwc_write_reg32(&(out_regs->doepdma), (uint32_t) _ep->dma_addr);
++		}
++
++		/* EP enable */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		dwc_write_reg32 (&(out_regs->doepctl), depctl.d32);
++	}
++}
++
++/**
++ * This function continues control IN transfers started by
++ * dwc_otg_ep0_start_transfer, when the transfer does not fit in a
++ * single packet.  NOTE: The DIEPCTL0/DOEPCTL0 registers only have one
++ * bit for the packet count.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _ep The EP0 data.
++ */
++void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
++{
++	depctl_data_t depctl;
++	deptsiz0_data_t deptsiz;
++        gintmsk_data_t intr_mask = { .d32 = 0};
++
++	if (_ep->is_in == 1) {
++		dwc_otg_dev_in_ep_regs_t *in_regs = 
++			_core_if->dev_if->in_ep_regs[0];
++                gnptxsts_data_t tx_status = {.d32 = 0};
++
++                tx_status.d32 = dwc_read_reg32( &_core_if->core_global_regs->gnptxsts );
++                /** @todo Should there be check for room in the Tx
++                 * Status Queue.  If not remove the code above this comment. */
++
++                depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
++		deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
++
++                /* Program the transfer size and packet count
++                 *  as follows: xfersize = N * maxpacket +
++                 *  short_packet pktcnt = N + (short_packet
++                 *  exist ? 1 : 0)  
++                 */
++                deptsiz.b.xfersize = (_ep->total_len - _ep->xfer_count) > _ep->maxpacket ? _ep->maxpacket : 
++                        (_ep->total_len - _ep->xfer_count);
++                deptsiz.b.pktcnt = 1;
++		_ep->xfer_len += deptsiz.b.xfersize;
++
++                dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++                DWC_DEBUGPL(DBG_PCDV, "IN len=%d  xfersize=%d pktcnt=%d [%08x]\n",
++                            _ep->xfer_len, 
++                            deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
++
++		/* Write the DMA register */
++		if (_core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
++			dwc_write_reg32 (&(in_regs->diepdma), 
++					 CPHYSADDR((uint32_t)_ep->dma_addr)); // winder
++		}
++
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		dwc_write_reg32(&in_regs->diepctl, depctl.d32);
++
++                /** 
++                 * Enable the Non-Periodic Tx FIFO empty interrupt, the
++                 * data will be written into the fifo by the ISR.
++                 */ 
++                if (!_core_if->dma_enable) {
++                        /* First clear it from GINTSTS */
++                        intr_mask.b.nptxfempty = 1;
++                        dwc_write_reg32( &_core_if->core_global_regs->gintsts,
++                                         intr_mask.d32 );
++
++                        dwc_modify_reg32( &_core_if->core_global_regs->gintmsk,
++                                          intr_mask.d32, intr_mask.d32);
++                }
++                
++	} 
++
++}
++
++#ifdef DEBUG
++void dump_msg(const u8 *buf, unsigned int length)
++{
++	unsigned int	start, num, i;
++	char		line[52], *p;
++
++	if (length >= 512)
++		return;
++	start = 0;
++	while (length > 0) {
++		num = min(length, 16u);
++		p = line;
++		for (i = 0; i < num; ++i) {
++			if (i == 8)
++				*p++ = ' ';
++			sprintf(p, " %02x", buf[i]);
++			p += 3;
++		}
++		*p = 0;
++		DWC_PRINT( "%6x: %s\n", start, line);
++		buf += num;
++		start += num;
++		length -= num;
++	}
++}
++#else
++static inline void dump_msg(const u8 *buf, unsigned int length)
++{
++}
++#endif
++
++/**
++ * This function writes a packet into the Tx FIFO associated with the
++ * EP.  For non-periodic EPs the non-periodic Tx FIFO is written.  For
++ * periodic EPs the periodic Tx FIFO associated with the EP is written
++ * with all packets for the next micro-frame.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _ep The EP to write packet for.
++ * @param _dma Indicates if DMA is being used.
++ */
++void dwc_otg_ep_write_packet(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep, int _dma)
++{
++	/**
++	 * The buffer is padded to DWORD on a per packet basis in
++	 * slave/dma mode if the MPS is not DWORD aligned.  The last
++	 * packet, if short, is also padded to a multiple of DWORD.
++	 *
++	 * ep->xfer_buff always starts DWORD aligned in memory and is a 
++	 * multiple of DWORD in length
++	 *
++	 * ep->xfer_len can be any number of bytes
++	 *
++	 * ep->xfer_count is a multiple of ep->maxpacket until the last 
++	 *  packet
++	 *
++	 * FIFO access is DWORD */
++
++	uint32_t i;
++	uint32_t byte_count;
++	uint32_t dword_count;
++	uint32_t *fifo;
++        uint32_t *data_buff = (uint32_t *)_ep->xfer_buff;
++        
++        //DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, _core_if, _ep);
++        if (_ep->xfer_count >= _ep->xfer_len) {
++                DWC_WARN("%s() No data for EP%d!!!\n", __func__, _ep->num);
++                return;                
++        }
++
++	/* Find the byte length of the packet either short packet or MPS */
++	if ((_ep->xfer_len - _ep->xfer_count) < _ep->maxpacket) {
++		byte_count = _ep->xfer_len - _ep->xfer_count;
++	}
++	else {
++		byte_count = _ep->maxpacket;
++	}
++
++	/* Find the DWORD length, padded by extra bytes as neccessary if MPS
++	 * is not a multiple of DWORD */
++	dword_count =  (byte_count + 3) / 4;
++
++#ifdef VERBOSE
++        dump_msg(_ep->xfer_buff, byte_count);        
++#endif
++        if (_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++                /**@todo NGS Where are the Periodic Tx FIFO addresses
++                 * intialized?  What should this be? */
++                fifo = _core_if->data_fifo[_ep->tx_fifo_num];
++        } else {
++                fifo = _core_if->data_fifo[_ep->num];
++        }
++        
++        DWC_DEBUGPL((DBG_PCDV|DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n",
++                    fifo, data_buff, *data_buff, byte_count);
++        
++
++	if (!_dma) {
++		for (i=0; i<dword_count; i++, data_buff++) {
++			dwc_write_reg32( fifo, *data_buff );
++		}
++	}
++
++	_ep->xfer_count += byte_count;
++        _ep->xfer_buff += byte_count;
++#if 1 // winder, why do we need this??
++	_ep->dma_addr += byte_count;
++#endif
++}
++
++/** 
++ * Set the EP STALL.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _ep The EP to set the stall on.
++ */
++void dwc_otg_ep_set_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
++{
++	depctl_data_t depctl;
++	volatile uint32_t *depctl_addr;
++
++        DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, _ep->num, 
++	          (_ep->is_in?"IN":"OUT"));
++
++	if (_ep->is_in == 1) {
++		depctl_addr = &(_core_if->dev_if->in_ep_regs[_ep->num]->diepctl);
++		depctl.d32 = dwc_read_reg32(depctl_addr);
++
++		/* set the disable and stall bits */
++		if (depctl.b.epena) {
++                        depctl.b.epdis = 1;
++                }
++		depctl.b.stall = 1;
++		dwc_write_reg32(depctl_addr, depctl.d32);
++
++	} else {
++		depctl_addr = &(_core_if->dev_if->out_ep_regs[_ep->num]->doepctl);
++		depctl.d32 = dwc_read_reg32(depctl_addr);
++
++		/* set the stall bit */
++		depctl.b.stall = 1;
++		dwc_write_reg32(depctl_addr, depctl.d32);
++	}
++        DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr));
++	return;
++}
++
++/** 
++ * Clear the EP STALL.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _ep The EP to clear stall from.
++ */
++void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
++{
++	depctl_data_t depctl;
++	volatile uint32_t *depctl_addr;
++
++        DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, _ep->num, 
++                    (_ep->is_in?"IN":"OUT"));
++
++	if (_ep->is_in == 1) {
++		depctl_addr = &(_core_if->dev_if->in_ep_regs[_ep->num]->diepctl);
++	} else {
++		depctl_addr = &(_core_if->dev_if->out_ep_regs[_ep->num]->doepctl);
++	}
++
++	depctl.d32 = dwc_read_reg32(depctl_addr);
++
++	/* clear the stall bits */
++	depctl.b.stall = 0;
++
++        /* 
++         * USB Spec 9.4.5: For endpoints using data toggle, regardless
++         * of whether an endpoint has the Halt feature set, a
++         * ClearFeature(ENDPOINT_HALT) request always results in the
++         * data toggle being reinitialized to DATA0.
++         */
++        if (_ep->type == DWC_OTG_EP_TYPE_INTR || 
++            _ep->type == DWC_OTG_EP_TYPE_BULK) {
++                depctl.b.setd0pid = 1; /* DATA0 */
++        }
++        
++	dwc_write_reg32(depctl_addr, depctl.d32);
++        DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr));
++	return;
++}
++
++/** 
++ * This function reads a packet from the Rx FIFO into the destination
++ * buffer.  To read SETUP data use dwc_otg_read_setup_packet.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _dest   Destination buffer for the packet.
++ * @param _bytes  Number of bytes to copy to the destination.
++ */
++void dwc_otg_read_packet(dwc_otg_core_if_t *_core_if,
++			 uint8_t *_dest, 
++			 uint16_t _bytes)
++{
++	int i;
++	int word_count = (_bytes + 3) / 4;
++
++	volatile uint32_t *fifo = _core_if->data_fifo[0];
++	uint32_t *data_buff = (uint32_t *)_dest;
++
++	/**
++	 * @todo Account for the case where _dest is not dword aligned. This
++	 * requires reading data from the FIFO into a uint32_t temp buffer,
++	 * then moving it into the data buffer.
++	 */
++
++        DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p,%d)\n", __func__, 
++                    _core_if, _dest, _bytes);
++
++	for (i=0; i<word_count; i++, data_buff++) {
++		*data_buff = dwc_read_reg32(fifo);
++	}
++
++	return;
++}
++
++
++#ifdef DEBUG
++/**
++ * This functions reads the device registers and prints them
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *_core_if)
++{
++	int i;
++	volatile uint32_t *addr;
++
++	DWC_PRINT("Device Global Registers\n");
++	addr=&_core_if->dev_if->dev_global_regs->dcfg;
++	DWC_PRINT("DCFG      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->dev_if->dev_global_regs->dctl;
++	DWC_PRINT("DCTL      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->dev_if->dev_global_regs->dsts;
++	DWC_PRINT("DSTS      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->dev_if->dev_global_regs->diepmsk;
++	DWC_PRINT("DIEPMSK   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->dev_if->dev_global_regs->doepmsk;
++	DWC_PRINT("DOEPMSK   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->dev_if->dev_global_regs->daint;
++	DWC_PRINT("DAINT     @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->dev_if->dev_global_regs->dtknqr1;
++	DWC_PRINT("DTKNQR1   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++        if (_core_if->hwcfg2.b.dev_token_q_depth > 6) {
++                addr=&_core_if->dev_if->dev_global_regs->dtknqr2;
++                DWC_PRINT("DTKNQR2   @0x%08X : 0x%08X\n",
++                          (uint32_t)addr,dwc_read_reg32(addr));
++        }
++        
++	addr=&_core_if->dev_if->dev_global_regs->dvbusdis;
++	DWC_PRINT("DVBUSID   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++
++	addr=&_core_if->dev_if->dev_global_regs->dvbuspulse;
++	DWC_PRINT("DVBUSPULSE   @0x%08X : 0x%08X\n",
++                  (uint32_t)addr,dwc_read_reg32(addr));
++
++        if (_core_if->hwcfg2.b.dev_token_q_depth > 14) {
++		addr = &_core_if->dev_if->dev_global_regs->dtknqr3_dthrctl;
++                DWC_PRINT("DTKNQR3   @0x%08X : 0x%08X\n",
++                          (uint32_t)addr, dwc_read_reg32(addr));
++        }
++
++        if (_core_if->hwcfg2.b.dev_token_q_depth > 22) {
++		addr = &_core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
++		DWC_PRINT("DTKNQR4	 @0x%08X : 0x%08X\n", (uint32_t) addr,
++			   dwc_read_reg32(addr));
++	}
++	for (i = 0; i <= _core_if->dev_if->num_in_eps; i++) {
++		DWC_PRINT("Device IN EP %d Registers\n", i);
++		addr=&_core_if->dev_if->in_ep_regs[i]->diepctl;
++		DWC_PRINT("DIEPCTL   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&_core_if->dev_if->in_ep_regs[i]->diepint;
++		DWC_PRINT("DIEPINT   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&_core_if->dev_if->in_ep_regs[i]->dieptsiz;
++		DWC_PRINT("DIETSIZ   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&_core_if->dev_if->in_ep_regs[i]->diepdma;
++		DWC_PRINT("DIEPDMA   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		
++addr = &_core_if->dev_if->in_ep_regs[i]->dtxfsts;
++		DWC_PRINT("DTXFSTS	 @0x%08X : 0x%08X\n", (uint32_t) addr,
++			   dwc_read_reg32(addr));
++	}
++	for (i = 0; i <= _core_if->dev_if->num_out_eps; i++) {
++		DWC_PRINT("Device OUT EP %d Registers\n", i);
++		addr=&_core_if->dev_if->out_ep_regs[i]->doepctl;
++		DWC_PRINT("DOEPCTL   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&_core_if->dev_if->out_ep_regs[i]->doepfn;
++		DWC_PRINT("DOEPFN    @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&_core_if->dev_if->out_ep_regs[i]->doepint;
++		DWC_PRINT("DOEPINT   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&_core_if->dev_if->out_ep_regs[i]->doeptsiz;
++		DWC_PRINT("DOETSIZ   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&_core_if->dev_if->out_ep_regs[i]->doepdma;
++		DWC_PRINT("DOEPDMA   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	}
++	return;
++}
++
++/**
++ * This function reads the host registers and prints them
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_host_registers(dwc_otg_core_if_t *_core_if)
++{
++	int i;
++	volatile uint32_t *addr;
++
++	DWC_PRINT("Host Global Registers\n");
++	addr=&_core_if->host_if->host_global_regs->hcfg;
++	DWC_PRINT("HCFG      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->host_if->host_global_regs->hfir;
++	DWC_PRINT("HFIR      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->host_if->host_global_regs->hfnum;
++	DWC_PRINT("HFNUM     @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->host_if->host_global_regs->hptxsts;
++	DWC_PRINT("HPTXSTS   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->host_if->host_global_regs->haint;
++	DWC_PRINT("HAINT     @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->host_if->host_global_regs->haintmsk;
++	DWC_PRINT("HAINTMSK  @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=_core_if->host_if->hprt0;
++	DWC_PRINT("HPRT0     @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++
++	for (i=0; i<_core_if->core_params->host_channels; i++) {
++		DWC_PRINT("Host Channel %d Specific Registers\n", i);
++		addr=&_core_if->host_if->hc_regs[i]->hcchar;
++		DWC_PRINT("HCCHAR    @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&_core_if->host_if->hc_regs[i]->hcsplt;
++		DWC_PRINT("HCSPLT    @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&_core_if->host_if->hc_regs[i]->hcint;
++		DWC_PRINT("HCINT     @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&_core_if->host_if->hc_regs[i]->hcintmsk;
++		DWC_PRINT("HCINTMSK  @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&_core_if->host_if->hc_regs[i]->hctsiz;
++		DWC_PRINT("HCTSIZ    @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&_core_if->host_if->hc_regs[i]->hcdma;
++		DWC_PRINT("HCDMA     @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++
++	}
++	return;
++}
++
++/**
++ * This function reads the core global registers and prints them
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_global_registers(dwc_otg_core_if_t *_core_if)
++{
++	int i;
++	volatile uint32_t *addr;
++
++	DWC_PRINT("Core Global Registers\n");
++	addr=&_core_if->core_global_regs->gotgctl;
++	DWC_PRINT("GOTGCTL   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->gotgint;
++	DWC_PRINT("GOTGINT   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->gahbcfg;
++	DWC_PRINT("GAHBCFG   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->gusbcfg;
++	DWC_PRINT("GUSBCFG   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->grstctl;
++	DWC_PRINT("GRSTCTL   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->gintsts;
++	DWC_PRINT("GINTSTS   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->gintmsk;
++	DWC_PRINT("GINTMSK   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->grxstsr;
++	DWC_PRINT("GRXSTSR   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	//addr=&_core_if->core_global_regs->grxstsp;
++	//DWC_PRINT("GRXSTSP   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->grxfsiz;
++	DWC_PRINT("GRXFSIZ   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->gnptxfsiz;
++	DWC_PRINT("GNPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->gnptxsts;
++	DWC_PRINT("GNPTXSTS  @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->gi2cctl;
++	DWC_PRINT("GI2CCTL   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->gpvndctl;
++	DWC_PRINT("GPVNDCTL  @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->ggpio;
++	DWC_PRINT("GGPIO     @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->guid;
++	DWC_PRINT("GUID      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->gsnpsid;
++	DWC_PRINT("GSNPSID   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->ghwcfg1;
++	DWC_PRINT("GHWCFG1   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->ghwcfg2;
++	DWC_PRINT("GHWCFG2   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->ghwcfg3;
++	DWC_PRINT("GHWCFG3   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->ghwcfg4;
++	DWC_PRINT("GHWCFG4   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->hptxfsiz;
++	DWC_PRINT("HPTXFSIZ  @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++
++        for (i=0; i<_core_if->hwcfg4.b.num_dev_perio_in_ep; i++) {
++		addr=&_core_if->core_global_regs->dptxfsiz_dieptxf[i];
++		DWC_PRINT("DPTXFSIZ[%d] @0x%08X : 0x%08X\n",i,(uint32_t)addr,dwc_read_reg32(addr));
++	}
++
++}
++#endif
++
++/**
++ * Flush a Tx FIFO.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _num Tx FIFO to flush.
++ */
++extern void dwc_otg_flush_tx_fifo( dwc_otg_core_if_t *_core_if, 
++                                   const int _num ) 
++{
++        dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs;
++        volatile grstctl_t greset = { .d32 = 0};
++        int count = 0;
++        
++        DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "Flush Tx FIFO %d\n", _num);
++
++        greset.b.txfflsh = 1;
++        greset.b.txfnum = _num;
++        dwc_write_reg32( &global_regs->grstctl, greset.d32 );
++        
++        do {
++                greset.d32 = dwc_read_reg32( &global_regs->grstctl);
++                if (++count > 10000){
++                        DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n",
++                                  __func__, greset.d32,
++                                  dwc_read_reg32( &global_regs->gnptxsts));
++                        break;
++                }
++
++		udelay(1);
++        } while (greset.b.txfflsh == 1);
++        /* Wait for 3 PHY Clocks*/
++        UDELAY(1);
++}
++
++/**
++ * Flush Rx FIFO.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++extern void dwc_otg_flush_rx_fifo( dwc_otg_core_if_t *_core_if ) 
++{
++        dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs;
++        volatile grstctl_t greset = { .d32 = 0};
++        int count = 0;
++        
++        DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "%s\n", __func__);
++        /*
++         * 
++         */
++        greset.b.rxfflsh = 1;
++        dwc_write_reg32( &global_regs->grstctl, greset.d32 );
++        
++        do {
++                greset.d32 = dwc_read_reg32( &global_regs->grstctl);
++                if (++count > 10000){
++                        DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__, 
++                                 greset.d32);
++                        break;
++                }
++        } while (greset.b.rxfflsh == 1);        
++        /* Wait for 3 PHY Clocks*/
++        UDELAY(1);
++}
++
++/**
++ * Do core a soft reset of the core.  Be careful with this because it
++ * resets all the internal state machines of the core.
++ */
++
++void dwc_otg_core_reset(dwc_otg_core_if_t *_core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs;
++	volatile grstctl_t greset = { .d32 = 0};
++	int count = 0;
++
++	DWC_DEBUGPL(DBG_CILV, "%s\n", __func__);
++	/* Wait for AHB master IDLE state. */
++	do {
++		UDELAY(10);
++		greset.d32 = dwc_read_reg32( &global_regs->grstctl);
++		if (++count > 100000){
++			DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x %x\n", __func__, 
++			greset.d32, greset.b.ahbidle);
++			return;
++		}
++	} while (greset.b.ahbidle == 0);
++        
++// winder add.
++#if 1
++	/* Note: Actually, I don't exactly why we need to put delay here. */
++	MDELAY(100);
++#endif
++	/* Core Soft Reset */
++	count = 0;
++	greset.b.csftrst = 1;
++	dwc_write_reg32( &global_regs->grstctl, greset.d32 );
++// winder add.
++#if 1
++	/* Note: Actually, I don't exactly why we need to put delay here. */
++	MDELAY(100);
++#endif
++	do {
++		greset.d32 = dwc_read_reg32( &global_regs->grstctl);
++		if (++count > 10000){
++			DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", __func__, 
++				greset.d32);
++			break;
++		}
++		udelay(1);
++	} while (greset.b.csftrst == 1);        
++	/* Wait for 3 PHY Clocks*/
++	//DWC_PRINT("100ms\n");
++	MDELAY(100);
++}
++
++
++
++/**
++ * Register HCD callbacks.  The callbacks are used to start and stop
++ * the HCD for interrupt processing.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _cb the HCD callback structure.
++ * @param _p pointer to be passed to callback function (usb_hcd*).
++ */
++extern void dwc_otg_cil_register_hcd_callbacks( dwc_otg_core_if_t *_core_if,
++                                                dwc_otg_cil_callbacks_t *_cb,
++                                                void *_p)
++{
++        _core_if->hcd_cb = _cb;        
++        _cb->p = _p;        
++}
++
++/**
++ * Register PCD callbacks.  The callbacks are used to start and stop
++ * the PCD for interrupt processing.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _cb the PCD callback structure.
++ * @param _p pointer to be passed to callback function (pcd*).
++ */
++extern void dwc_otg_cil_register_pcd_callbacks( dwc_otg_core_if_t *_core_if,
++                                                dwc_otg_cil_callbacks_t *_cb,
++                                                void *_p)
++{
++        _core_if->pcd_cb = _cb;
++        _cb->p = _p;
++}
++
+diff --git a/drivers/usb/dwc_otg/dwc_otg_cil.h b/drivers/usb/dwc_otg/dwc_otg_cil.h
+new file mode 100644
+index 0000000..bbb9516
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_cil.h
+@@ -0,0 +1,911 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_cil.h $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 631780 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_CIL_H__)
++#define __DWC_CIL_H__
++
++#include "dwc_otg_plat.h"
++
++#include "dwc_otg_regs.h"
++#ifdef DEBUG
++#include "linux/timer.h"
++#endif
++
++/* the OTG capabilities. */
++#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0
++#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1
++#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2
++/* the maximum speed of operation in host and device mode. */
++#define DWC_SPEED_PARAM_HIGH 0
++#define DWC_SPEED_PARAM_FULL 1
++/* the PHY clock rate in low power mode when connected to a
++ * Low Speed device in host mode. */
++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0
++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1
++/* the type of PHY interface to use. */
++#define DWC_PHY_TYPE_PARAM_FS 0
++#define DWC_PHY_TYPE_PARAM_UTMI 1
++#define DWC_PHY_TYPE_PARAM_ULPI 2
++/* whether to use the internal or external supply to 
++ * drive the vbus with a ULPI phy. */
++#define DWC_PHY_ULPI_INTERNAL_VBUS 0
++#define DWC_PHY_ULPI_EXTERNAL_VBUS 1
++/* EP type. */
++
++/**
++ * @file
++ * This file contains the interface to the Core Interface Layer.
++ */
++
++/**
++ * The <code>dwc_ep</code> structure represents the state of a single
++ * endpoint when acting in device mode. It contains the data items
++ * needed for an endpoint to be activated and transfer packets.
++ */
++typedef struct dwc_ep {
++        /** EP number used for register address lookup */
++        uint8_t  num;
++        /** EP direction 0 = OUT */
++        unsigned is_in : 1;           
++        /** EP active. */
++        unsigned active : 1;
++
++	/** Periodic Tx FIFO # for IN EPs For INTR EP set to 0 to use non-periodic Tx FIFO
++		If dedicated Tx FIFOs are enabled for all IN Eps - Tx FIFO # FOR IN EPs*/
++        unsigned tx_fifo_num : 4;  
++        /** EP type: 0 - Control, 1 - ISOC,  2 - BULK,  3 - INTR */
++        unsigned type : 2;      
++#define DWC_OTG_EP_TYPE_CONTROL    0
++#define DWC_OTG_EP_TYPE_ISOC       1
++#define DWC_OTG_EP_TYPE_BULK       2
++#define DWC_OTG_EP_TYPE_INTR       3
++
++        /** DATA start PID for INTR and BULK EP */
++        unsigned data_pid_start : 1;  
++        /** Frame (even/odd) for ISOC EP */
++        unsigned even_odd_frame : 1;  
++        /** Max Packet bytes */
++        unsigned maxpacket : 11;
++
++        /** @name Transfer state */
++	/** @{ */
++
++	/**
++	 * Pointer to the beginning of the transfer buffer -- do not modify
++	 * during transfer.
++	 */
++	
++	uint32_t dma_addr;
++
++	uint8_t *start_xfer_buff;
++        /** pointer to the transfer buffer */
++        uint8_t *xfer_buff;          
++        /** Number of bytes to transfer */
++        unsigned xfer_len : 19;       
++        /** Number of bytes transferred. */
++        unsigned xfer_count : 19;
++        /** Sent ZLP */
++        unsigned sent_zlp : 1;
++        /** Total len for control transfer */
++        unsigned total_len : 19;
++
++		/** stall clear flag */
++		unsigned stall_clear_flag : 1;
++
++	/** @} */
++} dwc_ep_t;
++
++/*
++ * Reasons for halting a host channel.
++ */
++typedef enum dwc_otg_halt_status {
++	DWC_OTG_HC_XFER_NO_HALT_STATUS,
++	DWC_OTG_HC_XFER_COMPLETE,
++	DWC_OTG_HC_XFER_URB_COMPLETE,
++	DWC_OTG_HC_XFER_ACK,
++	DWC_OTG_HC_XFER_NAK,
++	DWC_OTG_HC_XFER_NYET,
++	DWC_OTG_HC_XFER_STALL,
++	DWC_OTG_HC_XFER_XACT_ERR,
++	DWC_OTG_HC_XFER_FRAME_OVERRUN,
++	DWC_OTG_HC_XFER_BABBLE_ERR,
++	DWC_OTG_HC_XFER_DATA_TOGGLE_ERR,
++	DWC_OTG_HC_XFER_AHB_ERR,
++	DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE,
++	DWC_OTG_HC_XFER_URB_DEQUEUE
++} dwc_otg_halt_status_e;
++	
++/**
++ * Host channel descriptor. This structure represents the state of a single
++ * host channel when acting in host mode. It contains the data items needed to
++ * transfer packets to an endpoint via a host channel.
++ */
++typedef struct dwc_hc {
++	/** Host channel number used for register address lookup */
++	uint8_t  hc_num;
++
++	/** Device to access */
++	unsigned dev_addr : 7;
++
++	/** EP to access */
++	unsigned ep_num : 4;
++
++	/** EP direction. 0: OUT, 1: IN */
++	unsigned ep_is_in : 1;
++
++	/**
++	 * EP speed.
++	 * One of the following values:
++	 * 	- DWC_OTG_EP_SPEED_LOW
++	 *	- DWC_OTG_EP_SPEED_FULL
++	 *	- DWC_OTG_EP_SPEED_HIGH
++	 */
++	unsigned speed : 2;
++#define DWC_OTG_EP_SPEED_LOW	0
++#define DWC_OTG_EP_SPEED_FULL	1
++#define DWC_OTG_EP_SPEED_HIGH	2	
++
++	/**
++	 * Endpoint type.
++	 * One of the following values:
++	 *	- DWC_OTG_EP_TYPE_CONTROL: 0
++	 *	- DWC_OTG_EP_TYPE_ISOC: 1
++	 *	- DWC_OTG_EP_TYPE_BULK: 2
++	 *	- DWC_OTG_EP_TYPE_INTR: 3
++	 */
++	unsigned ep_type : 2;
++
++	/** Max packet size in bytes */
++	unsigned max_packet : 11;
++
++	/**
++	 * PID for initial transaction.
++	 * 0: DATA0,<br>
++	 * 1: DATA2,<br>
++	 * 2: DATA1,<br>
++	 * 3: MDATA (non-Control EP),
++	 *    SETUP (Control EP)
++	 */
++	unsigned data_pid_start : 2;
++#define DWC_OTG_HC_PID_DATA0 0
++#define DWC_OTG_HC_PID_DATA2 1
++#define DWC_OTG_HC_PID_DATA1 2
++#define DWC_OTG_HC_PID_MDATA 3
++#define DWC_OTG_HC_PID_SETUP 3
++
++	/** Number of periodic transactions per (micro)frame */
++	unsigned multi_count: 2;
++
++	/** @name Transfer State */
++	/** @{ */
++
++	/** Pointer to the current transfer buffer position. */
++	uint8_t *xfer_buff;
++	/** Total number of bytes to transfer. */
++	uint32_t xfer_len;
++	/** Number of bytes transferred so far. */
++	uint32_t xfer_count;
++	/** Packet count at start of transfer.*/
++	uint16_t start_pkt_count;
++
++	/**
++	 * Flag to indicate whether the transfer has been started. Set to 1 if
++	 * it has been started, 0 otherwise.
++	 */
++	uint8_t xfer_started;
++
++	/**
++	 * Set to 1 to indicate that a PING request should be issued on this
++	 * channel. If 0, process normally.
++	 */
++	uint8_t	do_ping;
++
++	/**
++	 * Set to 1 to indicate that the error count for this transaction is
++	 * non-zero. Set to 0 if the error count is 0.
++	 */
++	uint8_t error_state;
++
++	/**
++	 * Set to 1 to indicate that this channel should be halted the next
++	 * time a request is queued for the channel. This is necessary in
++	 * slave mode if no request queue space is available when an attempt
++	 * is made to halt the channel.
++	 */
++	uint8_t halt_on_queue;
++
++	/**
++	 * Set to 1 if the host channel has been halted, but the core is not
++	 * finished flushing queued requests. Otherwise 0.
++	 */
++	uint8_t halt_pending;
++
++	/**
++	 * Reason for halting the host channel.
++	 */
++	dwc_otg_halt_status_e 	halt_status;
++
++	/*
++	 * Split settings for the host channel
++	 */
++	uint8_t do_split;          /**< Enable split for the channel */
++	uint8_t complete_split;    /**< Enable complete split */
++	uint8_t hub_addr;          /**< Address of high speed hub */
++
++	uint8_t port_addr;         /**< Port of the low/full speed device */
++	/** Split transaction position 
++	 * One of the following values:
++	 *    - DWC_HCSPLIT_XACTPOS_MID 
++	 *    - DWC_HCSPLIT_XACTPOS_BEGIN
++	 *    - DWC_HCSPLIT_XACTPOS_END
++	 *    - DWC_HCSPLIT_XACTPOS_ALL */
++	uint8_t xact_pos;
++
++	/** Set when the host channel does a short read. */
++	uint8_t short_read;
++
++	/**
++	 * Number of requests issued for this channel since it was assigned to
++	 * the current transfer (not counting PINGs).
++	 */
++	uint8_t requests;
++
++	/**
++	 * Queue Head for the transfer being processed by this channel.
++	 */
++	struct dwc_otg_qh *qh;
++
++	/** @} */
++
++	/** Entry in list of host channels. */
++	struct list_head	hc_list_entry;
++} dwc_hc_t;
++
++/**
++ * The following parameters may be specified when starting the module. These
++ * parameters define how the DWC_otg controller should be configured.
++ * Parameter values are passed to the CIL initialization function
++ * dwc_otg_cil_init.
++ */
++
++typedef struct dwc_otg_core_params 
++{
++	int32_t opt;
++//#define dwc_param_opt_default 1
++        /**
++	 * Specifies the OTG capabilities. The driver will automatically
++	 * detect the value for this parameter if none is specified.
++         * 0 - HNP and SRP capable (default)
++         * 1 - SRP Only capable
++         * 2 - No HNP/SRP capable
++         */
++        int32_t otg_cap;
++#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0
++#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1
++#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2
++//#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE
++	/**
++         * Specifies whether to use slave or DMA mode for accessing the data
++         * FIFOs. The driver will automatically detect the value for this
++         * parameter if none is specified.
++         * 0 - Slave
++         * 1 - DMA (default, if available)
++         */
++	int32_t dma_enable;
++//#define dwc_param_dma_enable_default 1
++	/** The DMA Burst size (applicable only for External DMA
++         * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32)
++         */
++        int32_t dma_burst_size;  /* Translate this to GAHBCFG values */
++//#define dwc_param_dma_burst_size_default 32
++	/**
++	 * Specifies the maximum speed of operation in host and device mode.
++	 * The actual speed depends on the speed of the attached device and
++	 * the value of phy_type. The actual speed depends on the speed of the
++	 * attached device.
++	 * 0 - High Speed (default)
++	 * 1 - Full Speed
++	 */
++        int32_t speed;
++//#define dwc_param_speed_default 0
++#define DWC_SPEED_PARAM_HIGH 0
++#define DWC_SPEED_PARAM_FULL 1
++
++	/** Specifies whether low power mode is supported when attached 
++	 *  to a Full Speed or Low Speed device in host mode.
++	 * 0 - Don't support low power mode (default)
++	 * 1 - Support low power mode
++	 */
++	int32_t host_support_fs_ls_low_power;
++//#define dwc_param_host_support_fs_ls_low_power_default 0
++	/** Specifies the PHY clock rate in low power mode when connected to a
++	 * Low Speed device in host mode. This parameter is applicable only if
++	 * HOST_SUPPORT_FS_LS_LOW_POWER is enabled.  If PHY_TYPE is set to FS
++	 * then defaults to 6 MHZ otherwise 48 MHZ.
++	 *
++	 * 0 - 48 MHz
++	 * 1 - 6 MHz
++	 */
++	int32_t host_ls_low_power_phy_clk;
++//#define dwc_param_host_ls_low_power_phy_clk_default 0
++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0
++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1
++	/**
++	 * 0 - Use cC FIFO size parameters
++	 * 1 - Allow dynamic FIFO sizing (default)
++	 */
++	int32_t enable_dynamic_fifo;
++//#define dwc_param_enable_dynamic_fifo_default 1
++	/** Total number of 4-byte words in the data FIFO memory. This 
++	 * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic 
++	 * Tx FIFOs.
++	 * 32 to 32768 (default 8192)
++	 * Note: The total FIFO memory depth in the FPGA configuration is 8192.
++	 */
++	int32_t data_fifo_size;
++//#define dwc_param_data_fifo_size_default 8192
++	/** Number of 4-byte words in the Rx FIFO in device mode when dynamic 
++	 * FIFO sizing is enabled.
++	 * 16 to 32768 (default 1064)
++	 */
++	int32_t dev_rx_fifo_size;
++//#define dwc_param_dev_rx_fifo_size_default 1064
++	/** Number of 4-byte words in the non-periodic Tx FIFO in device mode 
++	 * when dynamic FIFO sizing is enabled.
++	 * 16 to 32768 (default 1024)
++	 */
++	int32_t dev_nperio_tx_fifo_size;
++//#define dwc_param_dev_nperio_tx_fifo_size_default 1024
++	/** Number of 4-byte words in each of the periodic Tx FIFOs in device
++	 * mode when dynamic FIFO sizing is enabled.
++	 * 4 to 768 (default 256)
++	 */
++	uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS];
++//#define dwc_param_dev_perio_tx_fifo_size_default 256
++	/** Number of 4-byte words in the Rx FIFO in host mode when dynamic 
++	 * FIFO sizing is enabled.
++	 * 16 to 32768 (default 1024)  
++	 */
++	int32_t host_rx_fifo_size;
++//#define dwc_param_host_rx_fifo_size_default 1024
++        /** Number of 4-byte words in the non-periodic Tx FIFO in host mode 
++	 * when Dynamic FIFO sizing is enabled in the core. 
++	 * 16 to 32768 (default 1024)
++	 */
++	int32_t host_nperio_tx_fifo_size;
++//#define dwc_param_host_nperio_tx_fifo_size_default 1024
++	/** Number of 4-byte words in the host periodic Tx FIFO when dynamic 
++	 * FIFO sizing is enabled. 
++	 * 16 to 32768 (default 1024)
++	 */
++	int32_t host_perio_tx_fifo_size;
++//#define dwc_param_host_perio_tx_fifo_size_default 1024
++	/** The maximum transfer size supported in bytes.  
++	 * 2047 to 65,535  (default 65,535)
++	 */
++	int32_t max_transfer_size;
++//#define dwc_param_max_transfer_size_default 65535
++	/** The maximum number of packets in a transfer.  
++	 * 15 to 511  (default 511)
++	 */
++	int32_t max_packet_count;
++//#define dwc_param_max_packet_count_default 511
++	/** The number of host channel registers to use.  
++	 * 1 to 16 (default 12) 
++	 * Note: The FPGA configuration supports a maximum of 12 host channels.
++	 */
++	int32_t host_channels;
++//#define dwc_param_host_channels_default 12
++	/** The number of endpoints in addition to EP0 available for device 
++	 * mode operations. 
++	 * 1 to 15 (default 6 IN and OUT) 
++	 * Note: The FPGA configuration supports a maximum of 6 IN and OUT 
++	 * endpoints in addition to EP0.
++	 */
++	int32_t dev_endpoints;
++//#define dwc_param_dev_endpoints_default 6
++        /** 
++         * Specifies the type of PHY interface to use. By default, the driver
++         * will automatically detect the phy_type.
++         * 
++         * 0 - Full Speed PHY
++         * 1 - UTMI+ (default)
++         * 2 - ULPI
++         */
++	int32_t phy_type; 
++#define DWC_PHY_TYPE_PARAM_FS 0
++#define DWC_PHY_TYPE_PARAM_UTMI 1
++#define DWC_PHY_TYPE_PARAM_ULPI 2
++//#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI
++	/**
++         * Specifies the UTMI+ Data Width.  This parameter is
++         * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI
++         * PHY_TYPE, this parameter indicates the data width between
++         * the MAC and the ULPI Wrapper.) Also, this parameter is
++         * applicable only if the OTG_HSPHY_WIDTH cC parameter was set
++         * to "8 and 16 bits", meaning that the core has been
++         * configured to work at either data path width. 
++         *
++         * 8 or 16 bits (default 16)
++         */
++        int32_t phy_utmi_width;
++//#define dwc_param_phy_utmi_width_default 16
++        /**
++         * Specifies whether the ULPI operates at double or single
++         * data rate. This parameter is only applicable if PHY_TYPE is
++         * ULPI.
++         * 
++         * 0 - single data rate ULPI interface with 8 bit wide data
++         * bus (default)
++         * 1 - double data rate ULPI interface with 4 bit wide data
++         * bus
++         */
++        int32_t phy_ulpi_ddr;
++//#define dwc_param_phy_ulpi_ddr_default 0
++	/**
++	 * Specifies whether to use the internal or external supply to 
++	 * drive the vbus with a ULPI phy.
++	 */
++	int32_t phy_ulpi_ext_vbus;
++#define DWC_PHY_ULPI_INTERNAL_VBUS 0
++#define DWC_PHY_ULPI_EXTERNAL_VBUS 1
++//#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS
++        /**
++	 * Specifies whether to use the I2Cinterface for full speed PHY. This
++	 * parameter is only applicable if PHY_TYPE is FS.
++         * 0 - No (default)
++         * 1 - Yes
++         */
++        int32_t i2c_enable;
++//#define dwc_param_i2c_enable_default 0
++
++        int32_t ulpi_fs_ls;
++//#define dwc_param_ulpi_fs_ls_default 0
++
++	int32_t ts_dline;
++//#define dwc_param_ts_dline_default 0
++
++	/**
++	 * Specifies whether dedicated transmit FIFOs are
++	 * enabled for non periodic IN endpoints in device mode
++	 * 0 - No
++	 * 1 - Yes
++	 */
++	 int32_t en_multiple_tx_fifo;
++#define dwc_param_en_multiple_tx_fifo_default 1
++
++	/** Number of 4-byte words in each of the Tx FIFOs in device
++	 * mode when dynamic FIFO sizing is enabled.
++	 * 4 to 768 (default 256)
++	 */
++	uint32_t dev_tx_fifo_size[MAX_TX_FIFOS];
++#define dwc_param_dev_tx_fifo_size_default 256
++
++	/** Thresholding enable flag-
++	 * bit 0 - enable non-ISO Tx thresholding
++	 * bit 1 - enable ISO Tx thresholding
++	 * bit 2 - enable Rx thresholding
++	 */
++	uint32_t thr_ctl;
++#define dwc_param_thr_ctl_default 0
++
++	/** Thresholding length for Tx
++	 *	FIFOs in 32 bit DWORDs
++	 */
++	uint32_t tx_thr_length;
++#define dwc_param_tx_thr_length_default 64
++
++	/** Thresholding length for Rx
++	 *	FIFOs in 32 bit DWORDs
++	 */
++	uint32_t rx_thr_length;
++#define dwc_param_rx_thr_length_default 64
++} dwc_otg_core_params_t;
++
++#ifdef DEBUG
++struct dwc_otg_core_if;
++typedef	struct hc_xfer_info
++{
++	struct dwc_otg_core_if	*core_if;
++	dwc_hc_t		*hc;
++} hc_xfer_info_t;
++#endif
++
++/**
++ * The <code>dwc_otg_core_if</code> structure contains information needed to manage
++ * the DWC_otg controller acting in either host or device mode. It
++ * represents the programming view of the controller as a whole.
++ */
++typedef struct dwc_otg_core_if 
++{
++    /** Parameters that define how the core should be configured.*/
++    dwc_otg_core_params_t      *core_params;
++
++    /** Core Global registers starting at offset 000h. */
++    dwc_otg_core_global_regs_t *core_global_regs;
++
++    /** Device-specific information */
++    dwc_otg_dev_if_t           *dev_if;
++    /** Host-specific information */
++    dwc_otg_host_if_t          *host_if;
++
++    /*
++     * Set to 1 if the core PHY interface bits in USBCFG have been
++     * initialized.
++     */
++    uint8_t phy_init_done;
++
++    /*
++     * SRP Success flag, set by srp success interrupt in FS I2C mode
++     */
++    uint8_t srp_success;
++    uint8_t srp_timer_started;
++
++    /* Common configuration information */
++    /** Power and Clock Gating Control Register */
++    volatile uint32_t *pcgcctl;
++#define DWC_OTG_PCGCCTL_OFFSET 0xE00
++
++    /** Push/pop addresses for endpoints or host channels.*/
++    uint32_t *data_fifo[MAX_EPS_CHANNELS];
++#define DWC_OTG_DATA_FIFO_OFFSET 0x1000
++#define DWC_OTG_DATA_FIFO_SIZE 0x1000
++
++    /** Total RAM for FIFOs (Bytes) */
++    uint16_t total_fifo_size;
++    /** Size of Rx FIFO (Bytes) */
++    uint16_t rx_fifo_size;
++    /** Size of Non-periodic Tx FIFO (Bytes) */
++    uint16_t nperio_tx_fifo_size;
++        
++    /** 1 if DMA is enabled, 0 otherwise. */
++    uint8_t	dma_enable;
++
++	/** 1 if dedicated Tx FIFOs are enabled, 0 otherwise. */
++	uint8_t en_multiple_tx_fifo;
++
++    /** Set to 1 if multiple packets of a high-bandwidth transfer is in
++     * process of being queued */
++    uint8_t queuing_high_bandwidth;
++
++    /** Hardware Configuration -- stored here for convenience.*/
++    hwcfg1_data_t hwcfg1;
++    hwcfg2_data_t hwcfg2;
++    hwcfg3_data_t hwcfg3;
++    hwcfg4_data_t hwcfg4;
++
++    /** The operational State, during transations
++     * (a_host>>a_peripherial and b_device=>b_host) this may not
++     * match the core but allows the software to determine
++     * transitions.
++     */
++    uint8_t op_state;
++        
++    /**
++     * Set to 1 if the HCD needs to be restarted on a session request
++     * interrupt. This is required if no connector ID status change has
++     * occurred since the HCD was last disconnected.
++     */
++    uint8_t restart_hcd_on_session_req;
++
++    /** HCD callbacks */
++    /** A-Device is a_host */
++#define A_HOST 		(1)
++    /** A-Device is a_suspend */
++#define A_SUSPEND 	(2)
++    /** A-Device is a_peripherial */
++#define A_PERIPHERAL 	(3)
++    /** B-Device is operating as a Peripheral. */
++#define B_PERIPHERAL	(4)
++    /** B-Device is operating as a Host. */
++#define B_HOST 		(5)        
++
++    /** HCD callbacks */
++    struct dwc_otg_cil_callbacks *hcd_cb;
++    /** PCD callbacks */
++    struct dwc_otg_cil_callbacks *pcd_cb;
++
++	/** Device mode Periodic Tx FIFO Mask */
++	uint32_t p_tx_msk;
++	/** Device mode Periodic Tx FIFO Mask */
++	uint32_t tx_msk;
++
++#ifdef DEBUG
++    uint32_t		start_hcchar_val[MAX_EPS_CHANNELS];
++
++    hc_xfer_info_t		hc_xfer_info[MAX_EPS_CHANNELS];
++    struct timer_list	hc_xfer_timer[MAX_EPS_CHANNELS];
++
++#if 1 // winder
++    uint32_t		hfnum_7_samples;
++    uint32_t		hfnum_7_frrem_accum;
++    uint32_t		hfnum_0_samples;
++    uint32_t		hfnum_0_frrem_accum;
++    uint32_t		hfnum_other_samples;
++    uint32_t		hfnum_other_frrem_accum;
++#else
++    uint32_t		hfnum_7_samples;
++    uint64_t		hfnum_7_frrem_accum;
++    uint32_t		hfnum_0_samples;
++    uint64_t		hfnum_0_frrem_accum;
++    uint32_t		hfnum_other_samples;
++    uint64_t		hfnum_other_frrem_accum;
++#endif
++	resource_size_t phys_addr;		/* Added to support PLB DMA : phys-virt mapping */
++#endif	
++
++} dwc_otg_core_if_t;
++
++/*
++ * The following functions support initialization of the CIL driver component
++ * and the DWC_otg controller.
++ */
++extern dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *_reg_base_addr,
++                                           dwc_otg_core_params_t *_core_params);
++extern void dwc_otg_cil_remove(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_core_init(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_core_host_init(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_core_dev_init(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_enable_global_interrupts( dwc_otg_core_if_t *_core_if );
++extern void dwc_otg_disable_global_interrupts( dwc_otg_core_if_t *_core_if );
++
++/** @name Device CIL Functions
++ * The following functions support managing the DWC_otg controller in device
++ * mode.
++ */
++/**@{*/
++extern void dwc_otg_wakeup(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_read_setup_packet (dwc_otg_core_if_t *_core_if, uint32_t *_dest);
++extern uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_ep0_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_deactivate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_write_packet(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep, int _dma);
++extern void dwc_otg_ep_set_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *_core_if);
++/**@}*/
++
++/** @name Host CIL Functions
++ * The following functions support managing the DWC_otg controller in host
++ * mode.
++ */
++/**@{*/
++extern void dwc_otg_hc_init(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_hc_halt(dwc_otg_core_if_t *_core_if,
++			    dwc_hc_t *_hc,
++			    dwc_otg_halt_status_e _halt_status);
++extern void dwc_otg_hc_cleanup(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_hc_do_ping(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_hc_write_packet(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *_core_if);
++
++/**
++ * This function Reads HPRT0 in preparation to modify.  It keeps the
++ * WC bits 0 so that if they are read as 1, they won't clear when you
++ * write it back 
++ */
++static inline uint32_t dwc_otg_read_hprt0(dwc_otg_core_if_t *_core_if) 
++{
++        hprt0_data_t hprt0;
++        hprt0.d32 = dwc_read_reg32(_core_if->host_if->hprt0);
++        hprt0.b.prtena = 0;
++        hprt0.b.prtconndet = 0;
++        hprt0.b.prtenchng = 0;
++        hprt0.b.prtovrcurrchng = 0;
++        return hprt0.d32;
++}
++
++extern void dwc_otg_dump_host_registers(dwc_otg_core_if_t *_core_if);
++/**@}*/
++
++/** @name Common CIL Functions
++ * The following functions support managing the DWC_otg controller in either
++ * device or host mode.
++ */
++/**@{*/
++
++extern void dwc_otg_read_packet(dwc_otg_core_if_t *core_if,
++				uint8_t *dest, 
++				uint16_t bytes);
++
++extern void dwc_otg_dump_global_registers(dwc_otg_core_if_t *_core_if);
++
++extern void dwc_otg_flush_tx_fifo( dwc_otg_core_if_t *_core_if, 
++                                   const int _num );
++extern void dwc_otg_flush_rx_fifo( dwc_otg_core_if_t *_core_if );
++extern void dwc_otg_core_reset( dwc_otg_core_if_t *_core_if );
++
++#define NP_TXFIFO_EMPTY -1
++#define MAX_NP_TXREQUEST_Q_SLOTS 8
++/**
++ * This function returns the endpoint number of the request at
++ * the top of non-periodic TX FIFO, or -1 if the request FIFO is
++ * empty.
++ */
++static inline int dwc_otg_top_nptxfifo_epnum(dwc_otg_core_if_t *_core_if) {
++	gnptxsts_data_t txstatus = {.d32 = 0};
++
++	txstatus.d32 = dwc_read_reg32(&_core_if->core_global_regs->gnptxsts);
++	return (txstatus.b.nptxqspcavail == MAX_NP_TXREQUEST_Q_SLOTS ?
++		-1 : txstatus.b.nptxqtop_chnep);
++}
++/**
++ * This function returns the Core Interrupt register.
++ */
++static inline uint32_t dwc_otg_read_core_intr(dwc_otg_core_if_t *_core_if) {
++	return (dwc_read_reg32(&_core_if->core_global_regs->gintsts) &
++                dwc_read_reg32(&_core_if->core_global_regs->gintmsk));
++}
++
++/**
++ * This function returns the OTG Interrupt register.
++ */
++static inline uint32_t dwc_otg_read_otg_intr (dwc_otg_core_if_t *_core_if) {
++	return (dwc_read_reg32 (&_core_if->core_global_regs->gotgint));
++}
++
++/**
++ * This function reads the Device All Endpoints Interrupt register and
++ * returns the IN endpoint interrupt bits.
++ */
++static inline uint32_t dwc_otg_read_dev_all_in_ep_intr(dwc_otg_core_if_t *_core_if) {
++        uint32_t v;
++        v = dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daint) &
++                dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daintmsk);
++        return (v & 0xffff);
++        
++}
++
++/**
++ * This function reads the Device All Endpoints Interrupt register and
++ * returns the OUT endpoint interrupt bits.
++ */
++static inline uint32_t dwc_otg_read_dev_all_out_ep_intr(dwc_otg_core_if_t *_core_if) {
++        uint32_t v;
++        v = dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daint) &
++                dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daintmsk);
++        return ((v & 0xffff0000) >> 16);
++}
++
++/**
++ * This function returns the Device IN EP Interrupt register
++ */
++static inline uint32_t dwc_otg_read_dev_in_ep_intr(dwc_otg_core_if_t *_core_if,
++                                                   dwc_ep_t *_ep)
++{
++        dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
++	uint32_t v, msk, emp;
++	msk = dwc_read_reg32(&dev_if->dev_global_regs->diepmsk);
++	emp = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk);
++	msk |= ((emp >> _ep->num) & 0x1) << 7;
++	v = dwc_read_reg32(&dev_if->in_ep_regs[_ep->num]->diepint) & msk;
++/*
++	dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
++        uint32_t v;
++        v = dwc_read_reg32(&dev_if->in_ep_regs[_ep->num]->diepint) &
++                dwc_read_reg32(&dev_if->dev_global_regs->diepmsk);
++*/
++        return v;        
++}
++/**
++ * This function returns the Device OUT EP Interrupt register
++ */
++static inline uint32_t dwc_otg_read_dev_out_ep_intr(dwc_otg_core_if_t *_core_if, 
++                                                    dwc_ep_t *_ep)
++{
++        dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
++        uint32_t v;
++        v = dwc_read_reg32( &dev_if->out_ep_regs[_ep->num]->doepint) &
++			dwc_read_reg32(&dev_if->dev_global_regs->doepmsk);
++        return v;        
++}
++
++/**
++ * This function returns the Host All Channel Interrupt register
++ */
++static inline uint32_t dwc_otg_read_host_all_channels_intr (dwc_otg_core_if_t *_core_if)
++{
++	return (dwc_read_reg32 (&_core_if->host_if->host_global_regs->haint));
++}
++
++static inline uint32_t dwc_otg_read_host_channel_intr (dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
++{
++	return (dwc_read_reg32 (&_core_if->host_if->hc_regs[_hc->hc_num]->hcint));
++}
++
++
++/**
++ * This function returns the mode of the operation, host or device.
++ *
++ * @return 0 - Device Mode, 1 - Host Mode 
++ */
++static inline uint32_t dwc_otg_mode(dwc_otg_core_if_t *_core_if) {
++        return (dwc_read_reg32( &_core_if->core_global_regs->gintsts ) & 0x1);
++}
++
++static inline uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t *_core_if) 
++{
++        return (dwc_otg_mode(_core_if) != DWC_HOST_MODE);
++}
++static inline uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t *_core_if) 
++{
++        return (dwc_otg_mode(_core_if) == DWC_HOST_MODE);
++}
++
++extern int32_t dwc_otg_handle_common_intr( dwc_otg_core_if_t *_core_if );
++
++
++/**@}*/
++
++/**
++ * DWC_otg CIL callback structure.  This structure allows the HCD and
++ * PCD to register functions used for starting and stopping the PCD
++ * and HCD for role change on for a DRD.
++ */
++typedef struct dwc_otg_cil_callbacks 
++{
++        /** Start function for role change */
++        int (*start) (void *_p);
++        /** Stop Function for role change */
++        int (*stop) (void *_p);
++        /** Disconnect Function for role change */
++        int (*disconnect) (void *_p);
++        /** Resume/Remote wakeup Function */
++        int (*resume_wakeup) (void *_p);
++        /** Suspend function */
++        int (*suspend) (void *_p);
++        /** Session Start (SRP) */
++        int (*session_start) (void *_p);
++        /** Pointer passed to start() and stop() */
++        void *p;
++} dwc_otg_cil_callbacks_t;
++
++
++
++extern void dwc_otg_cil_register_pcd_callbacks( dwc_otg_core_if_t *_core_if,
++                                                dwc_otg_cil_callbacks_t *_cb,
++                                                void *_p);
++extern void dwc_otg_cil_register_hcd_callbacks( dwc_otg_core_if_t *_core_if,
++                                                dwc_otg_cil_callbacks_t *_cb,
++                                                void *_p);
++
++
++#endif
+diff --git a/drivers/usb/dwc_otg/dwc_otg_cil_ifx.h b/drivers/usb/dwc_otg/dwc_otg_cil_ifx.h
+new file mode 100644
+index 0000000..b0298ec
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_cil_ifx.h
+@@ -0,0 +1,58 @@
++/******************************************************************************
++**
++** FILE NAME    : dwc_otg_cil_ifx.h
++** PROJECT      : Twinpass/Danube
++** MODULES      : DWC OTG USB
++**
++** DATE         : 07 Sep. 2007
++** AUTHOR       : Sung Winder
++** DESCRIPTION  : Default param value.
++** COPYRIGHT    :       Copyright (c) 2007
++**                      Infineon Technologies AG
++**                      2F, No.2, Li-Hsin Rd., Hsinchu Science Park,
++**                      Hsin-chu City, 300 Taiwan.
++**
++**    This program is free software; you can redistribute it and/or modify
++**    it under the terms of the GNU General Public License as published by
++**    the Free Software Foundation; either version 2 of the License, or
++**    (at your option) any later version.
++**
++** HISTORY
++** $Date          $Author         $Comment
++** 12 April 2007   Sung Winder     Initiate Version
++*******************************************************************************/
++#if !defined(__DWC_OTG_CIL_IFX_H__)
++#define __DWC_OTG_CIL_IFX_H__
++
++/* ================ Default param value ================== */
++#define dwc_param_opt_default 1
++#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE
++#define dwc_param_dma_enable_default 1
++#define dwc_param_dma_burst_size_default 32
++#define dwc_param_speed_default DWC_SPEED_PARAM_HIGH
++#define dwc_param_host_support_fs_ls_low_power_default 0
++#define dwc_param_host_ls_low_power_phy_clk_default DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ
++#define dwc_param_enable_dynamic_fifo_default 1
++#define dwc_param_data_fifo_size_default 2048
++#define dwc_param_dev_rx_fifo_size_default 1024
++#define dwc_param_dev_nperio_tx_fifo_size_default 1024
++#define dwc_param_dev_perio_tx_fifo_size_default 768
++#define dwc_param_host_rx_fifo_size_default 640
++#define dwc_param_host_nperio_tx_fifo_size_default 640
++#define dwc_param_host_perio_tx_fifo_size_default 768
++#define dwc_param_max_transfer_size_default 65535
++#define dwc_param_max_packet_count_default 511
++#define dwc_param_host_channels_default 16
++#define dwc_param_dev_endpoints_default 6
++#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI
++#define dwc_param_phy_utmi_width_default 16
++#define dwc_param_phy_ulpi_ddr_default 0
++#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS
++#define dwc_param_i2c_enable_default 0
++#define dwc_param_ulpi_fs_ls_default 0
++#define dwc_param_ts_dline_default 0
++
++/* ======================================================= */
++
++#endif // __DWC_OTG_CIL_IFX_H__
++
+diff --git a/drivers/usb/dwc_otg/dwc_otg_cil_intr.c b/drivers/usb/dwc_otg/dwc_otg_cil_intr.c
+new file mode 100644
+index 0000000..d469ab4
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_cil_intr.c
+@@ -0,0 +1,708 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_cil_intr.c $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 553126 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file 
++ *
++ * The Core Interface Layer provides basic services for accessing and
++ * managing the DWC_otg hardware. These services are used by both the
++ * Host Controller Driver and the Peripheral Controller Driver.
++ *
++ * This file contains the Common Interrupt handlers.
++ */
++#include "dwc_otg_plat.h"
++#include "dwc_otg_regs.h"
++#include "dwc_otg_cil.h"
++
++#ifdef DEBUG
++inline const char *op_state_str( dwc_otg_core_if_t *_core_if ) 
++{
++        return (_core_if->op_state==A_HOST?"a_host":
++                (_core_if->op_state==A_SUSPEND?"a_suspend":
++                 (_core_if->op_state==A_PERIPHERAL?"a_peripheral":
++                  (_core_if->op_state==B_PERIPHERAL?"b_peripheral":
++                   (_core_if->op_state==B_HOST?"b_host":
++                    "unknown")))));
++}
++#endif
++
++/** This function will log a debug message 
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_mode_mismatch_intr (dwc_otg_core_if_t *_core_if)
++{
++	gintsts_data_t gintsts;
++	DWC_WARN("Mode Mismatch Interrupt: currently in %s mode\n", 
++		 dwc_otg_mode(_core_if) ? "Host" : "Device");
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.modemismatch = 1;	
++	dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32);
++	return 1;
++}
++
++/** Start the HCD.  Helper function for using the HCD callbacks.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++static inline void hcd_start( dwc_otg_core_if_t *_core_if ) 
++{        
++        if (_core_if->hcd_cb && _core_if->hcd_cb->start) {
++                _core_if->hcd_cb->start( _core_if->hcd_cb->p );
++        }
++}
++/** Stop the HCD.  Helper function for using the HCD callbacks. 
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++static inline void hcd_stop( dwc_otg_core_if_t *_core_if ) 
++{        
++        if (_core_if->hcd_cb && _core_if->hcd_cb->stop) {
++                _core_if->hcd_cb->stop( _core_if->hcd_cb->p );
++        }
++}
++/** Disconnect the HCD.  Helper function for using the HCD callbacks.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++static inline void hcd_disconnect( dwc_otg_core_if_t *_core_if ) 
++{
++        if (_core_if->hcd_cb && _core_if->hcd_cb->disconnect) {
++                _core_if->hcd_cb->disconnect( _core_if->hcd_cb->p );
++        }
++}
++/** Inform the HCD the a New Session has begun.  Helper function for
++ * using the HCD callbacks.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++static inline void hcd_session_start( dwc_otg_core_if_t *_core_if ) 
++{
++        if (_core_if->hcd_cb && _core_if->hcd_cb->session_start) {
++                _core_if->hcd_cb->session_start( _core_if->hcd_cb->p );
++        }
++}
++
++/** Start the PCD.  Helper function for using the PCD callbacks.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++static inline void pcd_start( dwc_otg_core_if_t *_core_if ) 
++{
++        if (_core_if->pcd_cb && _core_if->pcd_cb->start ) {
++                _core_if->pcd_cb->start( _core_if->pcd_cb->p );
++        }
++}
++/** Stop the PCD.  Helper function for using the PCD callbacks. 
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++static inline void pcd_stop( dwc_otg_core_if_t *_core_if ) 
++{
++        if (_core_if->pcd_cb && _core_if->pcd_cb->stop ) {
++                _core_if->pcd_cb->stop( _core_if->pcd_cb->p );
++        }
++}
++/** Suspend the PCD.  Helper function for using the PCD callbacks. 
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++static inline void pcd_suspend( dwc_otg_core_if_t *_core_if ) 
++{
++        if (_core_if->pcd_cb && _core_if->pcd_cb->suspend ) {
++                _core_if->pcd_cb->suspend( _core_if->pcd_cb->p );
++        }
++}
++/** Resume the PCD.  Helper function for using the PCD callbacks. 
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++static inline void pcd_resume( dwc_otg_core_if_t *_core_if ) 
++{
++        if (_core_if->pcd_cb && _core_if->pcd_cb->resume_wakeup ) {
++                _core_if->pcd_cb->resume_wakeup( _core_if->pcd_cb->p );
++        }
++}
++
++/**
++ * This function handles the OTG Interrupts. It reads the OTG
++ * Interrupt Register (GOTGINT) to determine what interrupt has
++ * occurred.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_otg_intr(dwc_otg_core_if_t *_core_if)
++{
++        dwc_otg_core_global_regs_t *global_regs = 
++                _core_if->core_global_regs;
++	gotgint_data_t gotgint;
++        gotgctl_data_t gotgctl;
++	gintmsk_data_t gintmsk;
++
++	gotgint.d32 = dwc_read_reg32( &global_regs->gotgint);
++        gotgctl.d32 = dwc_read_reg32( &global_regs->gotgctl);
++	DWC_DEBUGPL(DBG_CIL, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint.d32,
++                    op_state_str(_core_if));
++        //DWC_DEBUGPL(DBG_CIL, "gotgctl=%08x\n", gotgctl.d32 );
++
++	if (gotgint.b.sesenddet) {
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "Session End Detected++ (%s)\n",
++                            op_state_str(_core_if));
++                gotgctl.d32 = dwc_read_reg32( &global_regs->gotgctl);
++
++                if (_core_if->op_state == B_HOST) {
++                        pcd_start( _core_if );
++                        _core_if->op_state = B_PERIPHERAL;
++                } else {
++                        /* If not B_HOST and Device HNP still set. HNP
++                         * Did not succeed!*/
++                        if (gotgctl.b.devhnpen) {
++                                DWC_DEBUGPL(DBG_ANY, "Session End Detected\n");
++                                DWC_ERROR( "Device Not Connected/Responding!\n" );
++                        }
++
++                        /* If Session End Detected the B-Cable has
++                         * been disconnected. */
++                        /* Reset PCD and Gadget driver to a
++                         * clean state. */
++                        pcd_stop(_core_if);
++                }
++                gotgctl.d32 = 0;
++                gotgctl.b.devhnpen = 1;
++                dwc_modify_reg32( &global_regs->gotgctl, 
++                                  gotgctl.d32, 0);
++        }
++	if (gotgint.b.sesreqsucstschng) {
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "Session Reqeust Success Status Change++\n");
++                gotgctl.d32 = dwc_read_reg32( &global_regs->gotgctl);
++                if (gotgctl.b.sesreqscs) {
++			if ((_core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) && 
++			    (_core_if->core_params->i2c_enable)) {
++				_core_if->srp_success = 1;
++			}
++			else {
++				pcd_resume( _core_if );
++				/* Clear Session Request */
++				gotgctl.d32 = 0;
++				gotgctl.b.sesreq = 1;
++				dwc_modify_reg32( &global_regs->gotgctl, 
++						  gotgctl.d32, 0);
++			}
++                }
++	}
++	if (gotgint.b.hstnegsucstschng) {
++                /* Print statements during the HNP interrupt handling
++                 * can cause it to fail.*/
++                gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
++                if (gotgctl.b.hstnegscs) {
++                        if (dwc_otg_is_host_mode(_core_if) ) {
++                                _core_if->op_state = B_HOST;
++				/*
++				 * Need to disable SOF interrupt immediately.
++				 * When switching from device to host, the PCD
++				 * interrupt handler won't handle the
++				 * interrupt if host mode is already set. The
++				 * HCD interrupt handler won't get called if
++				 * the HCD state is HALT. This means that the
++				 * interrupt does not get handled and Linux
++				 * complains loudly.
++				 */
++				gintmsk.d32 = 0;
++				gintmsk.b.sofintr = 1;
++				dwc_modify_reg32(&global_regs->gintmsk,
++						 gintmsk.d32, 0);
++                                pcd_stop(_core_if);
++                                /*
++                                 * Initialize the Core for Host mode.
++                                 */
++                                hcd_start( _core_if );
++                                _core_if->op_state = B_HOST;
++                        }
++                } else {
++                        gotgctl.d32 = 0;
++                        gotgctl.b.hnpreq = 1;
++                        gotgctl.b.devhnpen = 1;
++                        dwc_modify_reg32( &global_regs->gotgctl, 
++                                          gotgctl.d32, 0);
++                        DWC_DEBUGPL( DBG_ANY, "HNP Failed\n");
++                        DWC_ERROR( "Device Not Connected/Responding\n" );
++                }
++	}
++	if (gotgint.b.hstnegdet) {
++                /* The disconnect interrupt is set at the same time as
++		 * Host Negotiation Detected.  During the mode
++		 * switch all interrupts are cleared so the disconnect
++		 * interrupt handler will not get executed.
++                 */
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "Host Negotiation Detected++ (%s)\n", 
++                            (dwc_otg_is_host_mode(_core_if)?"Host":"Device"));
++                if (dwc_otg_is_device_mode(_core_if)){
++                        DWC_DEBUGPL(DBG_ANY, "a_suspend->a_peripheral (%d)\n",_core_if->op_state);
++                        hcd_disconnect( _core_if );
++                        pcd_start( _core_if );
++                        _core_if->op_state = A_PERIPHERAL;
++                } else {
++			/*
++			 * Need to disable SOF interrupt immediately. When
++			 * switching from device to host, the PCD interrupt
++			 * handler won't handle the interrupt if host mode is
++			 * already set. The HCD interrupt handler won't get
++			 * called if the HCD state is HALT. This means that
++			 * the interrupt does not get handled and Linux
++			 * complains loudly.
++			 */
++			gintmsk.d32 = 0;
++			gintmsk.b.sofintr = 1;
++			dwc_modify_reg32(&global_regs->gintmsk,
++					 gintmsk.d32, 0);
++                        pcd_stop( _core_if );
++                        hcd_start( _core_if );
++                        _core_if->op_state = A_HOST;
++                }
++	}
++	if (gotgint.b.adevtoutchng) {
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "A-Device Timeout Change++\n");
++	}
++	if (gotgint.b.debdone) {
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "Debounce Done++\n");
++	}
++
++	/* Clear GOTGINT */
++	dwc_write_reg32 (&_core_if->core_global_regs->gotgint, gotgint.d32);
++
++	return 1;
++}
++
++/**
++ * This function handles the Connector ID Status Change Interrupt.  It
++ * reads the OTG Interrupt Register (GOTCTL) to determine whether this
++ * is a Device to Host Mode transition or a Host Mode to Device
++ * Transition.  
++ *
++ * This only occurs when the cable is connected/removed from the PHY
++ * connector.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_conn_id_status_change_intr(dwc_otg_core_if_t *_core_if)
++{
++        uint32_t count = 0;
++        
++	gintsts_data_t gintsts = { .d32 = 0 };
++	gintmsk_data_t gintmsk = { .d32 = 0 };
++        gotgctl_data_t gotgctl = { .d32 = 0 }; 
++
++	/*
++	 * Need to disable SOF interrupt immediately. If switching from device
++	 * to host, the PCD interrupt handler won't handle the interrupt if
++	 * host mode is already set. The HCD interrupt handler won't get
++	 * called if the HCD state is HALT. This means that the interrupt does
++	 * not get handled and Linux complains loudly.
++	 */
++	gintmsk.b.sofintr = 1;
++	dwc_modify_reg32(&_core_if->core_global_regs->gintmsk, gintmsk.d32, 0);
++
++	DWC_DEBUGPL(DBG_CIL, " ++Connector ID Status Change Interrupt++  (%s)\n",
++                    (dwc_otg_is_host_mode(_core_if)?"Host":"Device"));
++        gotgctl.d32 = dwc_read_reg32(&_core_if->core_global_regs->gotgctl);
++	DWC_DEBUGPL(DBG_CIL, "gotgctl=%0x\n", gotgctl.d32);
++	DWC_DEBUGPL(DBG_CIL, "gotgctl.b.conidsts=%d\n", gotgctl.b.conidsts);
++        
++        /* B-Device connector (Device Mode) */
++        if (gotgctl.b.conidsts) {
++                /* Wait for switch to device mode. */
++                while (!dwc_otg_is_device_mode(_core_if) ){
++                        DWC_PRINT("Waiting for Peripheral Mode, Mode=%s\n",
++                                  (dwc_otg_is_host_mode(_core_if)?"Host":"Peripheral"));
++                        MDELAY(100);
++                        if (++count > 10000) *(uint32_t*)NULL=0;
++                }
++                _core_if->op_state = B_PERIPHERAL;
++		dwc_otg_core_init(_core_if);
++		dwc_otg_enable_global_interrupts(_core_if);
++                pcd_start( _core_if );
++        } else {
++                /* A-Device connector (Host Mode) */
++                while (!dwc_otg_is_host_mode(_core_if) ) {
++                        DWC_PRINT("Waiting for Host Mode, Mode=%s\n",
++                                  (dwc_otg_is_host_mode(_core_if)?"Host":"Peripheral"));
++                        MDELAY(100);
++                        if (++count > 10000) *(uint32_t*)NULL=0;
++                }
++                _core_if->op_state = A_HOST;
++                /*
++                 * Initialize the Core for Host mode.
++                 */
++		dwc_otg_core_init(_core_if);
++		dwc_otg_enable_global_interrupts(_core_if);
++                hcd_start( _core_if );
++        }
++
++	/* Set flag and clear interrupt */
++	gintsts.b.conidstschng = 1;
++	dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/** 
++ * This interrupt indicates that a device is initiating the Session
++ * Request Protocol to request the host to turn on bus power so a new
++ * session can begin. The handler responds by turning on bus power. If
++ * the DWC_otg controller is in low power mode, the handler brings the
++ * controller out of low power mode before turning on bus power. 
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_session_req_intr( dwc_otg_core_if_t *_core_if )
++{
++#ifndef DWC_HOST_ONLY // winder
++    hprt0_data_t hprt0;
++#endif
++    gintsts_data_t gintsts;
++
++#ifndef DWC_HOST_ONLY
++    DWC_DEBUGPL(DBG_ANY, "++Session Request Interrupt++\n");	
++
++    if (dwc_otg_is_device_mode(_core_if) ) {
++        DWC_PRINT("SRP: Device mode\n");
++    } else {
++        DWC_PRINT("SRP: Host mode\n");
++
++        /* Turn on the port power bit. */
++        hprt0.d32 = dwc_otg_read_hprt0( _core_if );
++        hprt0.b.prtpwr = 1;
++        dwc_write_reg32(_core_if->host_if->hprt0, hprt0.d32);
++
++        /* Start the Connection timer. So a message can be displayed
++        * if connect does not occur within 10 seconds. */ 
++        hcd_session_start( _core_if );
++    }
++#endif
++
++    /* Clear interrupt */
++    gintsts.d32 = 0;
++    gintsts.b.sessreqintr = 1;
++    dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32);
++
++    return 1;
++}
++
++/** 
++ * This interrupt indicates that the DWC_otg controller has detected a
++ * resume or remote wakeup sequence. If the DWC_otg controller is in
++ * low power mode, the handler must brings the controller out of low
++ * power mode. The controller automatically begins resume
++ * signaling. The handler schedules a time to stop resume signaling.
++ */
++int32_t dwc_otg_handle_wakeup_detected_intr( dwc_otg_core_if_t *_core_if )
++{
++	gintsts_data_t gintsts;
++
++	DWC_DEBUGPL(DBG_ANY, "++Resume and Remote Wakeup Detected Interrupt++\n");
++
++        if (dwc_otg_is_device_mode(_core_if) ) { 
++                dctl_data_t dctl = {.d32=0};
++                DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", 
++                            dwc_read_reg32( &_core_if->dev_if->dev_global_regs->dsts));
++#ifdef PARTIAL_POWER_DOWN
++                if (_core_if->hwcfg4.b.power_optimiz) {
++                        pcgcctl_data_t power = {.d32=0};
++
++                        power.d32 = dwc_read_reg32( _core_if->pcgcctl );
++                        DWC_DEBUGPL(DBG_CIL, "PCGCCTL=%0x\n", power.d32);
++
++                        power.b.stoppclk = 0;
++                        dwc_write_reg32( _core_if->pcgcctl, power.d32);
++
++                        power.b.pwrclmp = 0;
++                        dwc_write_reg32( _core_if->pcgcctl, power.d32);
++
++                        power.b.rstpdwnmodule = 0;
++                        dwc_write_reg32( _core_if->pcgcctl, power.d32);
++                }
++#endif
++                /* Clear the Remote Wakeup Signalling */
++                dctl.b.rmtwkupsig = 1;
++                dwc_modify_reg32( &_core_if->dev_if->dev_global_regs->dctl, 
++                                  dctl.d32, 0 );
++
++                if (_core_if->pcd_cb && _core_if->pcd_cb->resume_wakeup) {
++                        _core_if->pcd_cb->resume_wakeup( _core_if->pcd_cb->p );
++                }
++        
++        } else {
++                /*
++		 * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms
++		 * so that OPT tests pass with all PHYs).
++		 */
++                hprt0_data_t hprt0 = {.d32=0};
++                pcgcctl_data_t pcgcctl = {.d32=0};
++                /* Restart the Phy Clock */
++                pcgcctl.b.stoppclk = 1;
++                dwc_modify_reg32(_core_if->pcgcctl, pcgcctl.d32, 0);
++                UDELAY(10);
++                
++                /* Now wait for 70 ms. */
++                hprt0.d32 = dwc_otg_read_hprt0( _core_if );
++                DWC_DEBUGPL(DBG_ANY,"Resume: HPRT0=%0x\n", hprt0.d32);
++                MDELAY(70);
++                hprt0.b.prtres = 0; /* Resume */
++                dwc_write_reg32(_core_if->host_if->hprt0, hprt0.d32);                
++                DWC_DEBUGPL(DBG_ANY,"Clear Resume: HPRT0=%0x\n", dwc_read_reg32(_core_if->host_if->hprt0));
++        }        
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.wkupintr = 1;
++	dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/** 
++ * This interrupt indicates that a device has been disconnected from
++ * the root port. 
++ */
++int32_t dwc_otg_handle_disconnect_intr( dwc_otg_core_if_t *_core_if)
++{
++	gintsts_data_t gintsts;
++
++	DWC_DEBUGPL(DBG_ANY, "++Disconnect Detected Interrupt++ (%s) %s\n", 
++                    (dwc_otg_is_host_mode(_core_if)?"Host":"Device"), 
++                    op_state_str(_core_if));
++
++/** @todo Consolidate this if statement. */
++#ifndef DWC_HOST_ONLY
++        if (_core_if->op_state == B_HOST) {
++                /* If in device mode Disconnect and stop the HCD, then
++                 * start the PCD. */
++                hcd_disconnect( _core_if );
++                pcd_start( _core_if );
++                _core_if->op_state = B_PERIPHERAL;
++        } else if (dwc_otg_is_device_mode(_core_if)) {
++                gotgctl_data_t gotgctl = { .d32 = 0 }; 
++                gotgctl.d32 = dwc_read_reg32(&_core_if->core_global_regs->gotgctl);
++                if (gotgctl.b.hstsethnpen==1) {
++                        /* Do nothing, if HNP in process the OTG
++                         * interrupt "Host Negotiation Detected"
++                         * interrupt will do the mode switch.
++                         */
++                } else if (gotgctl.b.devhnpen == 0) {
++                        /* If in device mode Disconnect and stop the HCD, then
++                         * start the PCD. */
++                        hcd_disconnect( _core_if );
++                        pcd_start( _core_if );
++                        _core_if->op_state = B_PERIPHERAL;
++                } else {
++                        DWC_DEBUGPL(DBG_ANY,"!a_peripheral && !devhnpen\n");
++                }
++        } else {
++                if (_core_if->op_state == A_HOST) {
++                        /* A-Cable still connected but device disconnected. */
++                        hcd_disconnect( _core_if );
++                }
++        }
++#endif
++/* Without OTG, we should use the disconnect function!? winder added.*/
++#if 1 // NO OTG, so host only!!
++        hcd_disconnect( _core_if );
++#endif
++   
++	gintsts.d32 = 0;
++	gintsts.b.disconnect = 1;
++	dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32);
++	return 1;
++}
++/**
++ * This interrupt indicates that SUSPEND state has been detected on
++ * the USB.
++ * 
++ * For HNP the USB Suspend interrupt signals the change from
++ * "a_peripheral" to "a_host".
++ *
++ * When power management is enabled the core will be put in low power
++ * mode.
++ */
++int32_t dwc_otg_handle_usb_suspend_intr(dwc_otg_core_if_t *_core_if )
++{
++        dsts_data_t dsts;
++        gintsts_data_t gintsts;
++
++         //805141:<IFTW-fchang>.removed DWC_DEBUGPL(DBG_ANY,"USB SUSPEND\n");
++
++        if (dwc_otg_is_device_mode( _core_if ) ) {             
++                /* Check the Device status register to determine if the Suspend
++                 * state is active. */
++                dsts.d32 = dwc_read_reg32( &_core_if->dev_if->dev_global_regs->dsts);
++                DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", dsts.d32);
++                DWC_DEBUGPL(DBG_PCD, "DSTS.Suspend Status=%d "
++                            "HWCFG4.power Optimize=%d\n", 
++                            dsts.b.suspsts, _core_if->hwcfg4.b.power_optimiz);
++
++
++#ifdef PARTIAL_POWER_DOWN
++/** @todo Add a module parameter for power management. */
++        
++                if (dsts.b.suspsts && _core_if->hwcfg4.b.power_optimiz) {
++                        pcgcctl_data_t power = {.d32=0};
++                        DWC_DEBUGPL(DBG_CIL, "suspend\n");
++
++                        power.b.pwrclmp = 1;
++                        dwc_write_reg32( _core_if->pcgcctl, power.d32);
++
++                        power.b.rstpdwnmodule = 1;
++                        dwc_modify_reg32( _core_if->pcgcctl, 0, power.d32);
++
++                        power.b.stoppclk = 1;
++                        dwc_modify_reg32( _core_if->pcgcctl, 0, power.d32);
++                
++                } else {
++                        DWC_DEBUGPL(DBG_ANY,"disconnect?\n");
++                }
++#endif
++                /* PCD callback for suspend. */
++                pcd_suspend(_core_if);
++        } else {
++                if (_core_if->op_state == A_PERIPHERAL) {
++                        DWC_DEBUGPL(DBG_ANY,"a_peripheral->a_host\n");
++                        /* Clear the a_peripheral flag, back to a_host. */
++                        pcd_stop( _core_if );
++                        hcd_start( _core_if );
++                        _core_if->op_state = A_HOST;
++                }                
++        }
++        
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.usbsuspend = 1;
++	dwc_write_reg32( &_core_if->core_global_regs->gintsts, gintsts.d32);
++
++        return 1;
++}
++
++
++/**
++ * This function returns the Core Interrupt register.
++ */
++static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t *_core_if) 
++{
++        gintsts_data_t gintsts;
++        gintmsk_data_t gintmsk;
++        gintmsk_data_t gintmsk_common = {.d32=0};
++	gintmsk_common.b.wkupintr = 1;
++	gintmsk_common.b.sessreqintr = 1;
++	gintmsk_common.b.conidstschng = 1;
++	gintmsk_common.b.otgintr = 1;
++	gintmsk_common.b.modemismatch = 1;
++        gintmsk_common.b.disconnect = 1;
++        gintmsk_common.b.usbsuspend = 1;
++        /** @todo: The port interrupt occurs while in device 
++         * mode. Added code to CIL to clear the interrupt for now! 
++         */
++        gintmsk_common.b.portintr = 1;
++
++        gintsts.d32 = dwc_read_reg32(&_core_if->core_global_regs->gintsts);
++        gintmsk.d32 = dwc_read_reg32(&_core_if->core_global_regs->gintmsk);
++#ifdef DEBUG
++        /* if any common interrupts set */
++        if (gintsts.d32 & gintmsk_common.d32) {
++                DWC_DEBUGPL(DBG_ANY, "gintsts=%08x  gintmsk=%08x\n", 
++                            gintsts.d32, gintmsk.d32);
++        }
++#endif        
++        
++        return ((gintsts.d32 & gintmsk.d32 ) & gintmsk_common.d32);
++
++}
++
++/**
++ * Common interrupt handler.
++ *
++ * The common interrupts are those that occur in both Host and Device mode. 
++ * This handler handles the following interrupts:
++ * - Mode Mismatch Interrupt
++ * - Disconnect Interrupt
++ * - OTG Interrupt
++ * - Connector ID Status Change Interrupt
++ * - Session Request Interrupt.
++ * - Resume / Remote Wakeup Detected Interrupt.
++ * 
++ */
++extern int32_t dwc_otg_handle_common_intr( dwc_otg_core_if_t *_core_if )
++{
++	int retval = 0;
++        gintsts_data_t gintsts;
++
++        gintsts.d32 = dwc_otg_read_common_intr(_core_if);
++
++        if (gintsts.b.modemismatch) {
++                retval |= dwc_otg_handle_mode_mismatch_intr( _core_if );
++        }
++        if (gintsts.b.otgintr) {
++                retval |= dwc_otg_handle_otg_intr( _core_if );
++        }
++        if (gintsts.b.conidstschng) {
++                retval |= dwc_otg_handle_conn_id_status_change_intr( _core_if );
++        }
++        if (gintsts.b.disconnect) {
++                retval |= dwc_otg_handle_disconnect_intr( _core_if );
++        }
++        if (gintsts.b.sessreqintr) {
++                retval |= dwc_otg_handle_session_req_intr( _core_if );
++        }
++        if (gintsts.b.wkupintr) {
++                retval |= dwc_otg_handle_wakeup_detected_intr( _core_if );
++        }
++        if (gintsts.b.usbsuspend) {
++                retval |= dwc_otg_handle_usb_suspend_intr( _core_if );
++        }
++        if (gintsts.b.portintr && dwc_otg_is_device_mode(_core_if)) {
++                /* The port interrupt occurs while in device mode with HPRT0
++                 * Port Enable/Disable.
++                 */
++                gintsts.d32 = 0;
++                gintsts.b.portintr = 1;
++                dwc_write_reg32(&_core_if->core_global_regs->gintsts, 
++                                gintsts.d32);
++                retval |= 1;
++                
++        }
++        return retval;
++}
+diff --git a/drivers/usb/dwc_otg/dwc_otg_driver.c b/drivers/usb/dwc_otg/dwc_otg_driver.c
+new file mode 100644
+index 0000000..1b0daab
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_driver.c
+@@ -0,0 +1,1274 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_driver.c $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 631780 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ * The dwc_otg_driver module provides the initialization and cleanup entry
++ * points for the DWC_otg driver. This module will be dynamically installed
++ * after Linux is booted using the insmod command. When the module is
++ * installed, the dwc_otg_init function is called. When the module is
++ * removed (using rmmod), the dwc_otg_cleanup function is called.
++ * 
++ * This module also defines a data structure for the dwc_otg_driver, which is
++ * used in conjunction with the standard ARM lm_device structure. These
++ * structures allow the OTG driver to comply with the standard Linux driver
++ * model in which devices and drivers are registered with a bus driver. This
++ * has the benefit that Linux can expose attributes of the driver and device
++ * in its special sysfs file system. Users can then read or write files in
++ * this file system to perform diagnostics on the driver components or the
++ * device.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/gpio.h>
++
++#include <linux/device.h>
++#include <linux/platform_device.h>
++
++#include <linux/errno.h>
++#include <linux/types.h>
++#include <linux/stat.h>  /* permission constants */
++#include <linux/irq.h>
++#include <asm/io.h>
++
++#include "dwc_otg_plat.h"
++#include "dwc_otg_attr.h"
++#include "dwc_otg_driver.h"
++#include "dwc_otg_cil.h"
++#include "dwc_otg_cil_ifx.h"
++
++// #include "dwc_otg_pcd.h" // device
++#include "dwc_otg_hcd.h"   // host
++
++#include "dwc_otg_ifx.h" // for Infineon platform specific.
++
++#define	DWC_DRIVER_VERSION	"2.60a 22-NOV-2006"
++#define	DWC_DRIVER_DESC		"HS OTG USB Controller driver"
++
++const char dwc_driver_name[] = "dwc_otg";
++
++static unsigned long dwc_iomem_base = IFX_USB_IOMEM_BASE;
++int dwc_irq = LTQ_USB_INT;
++//int dwc_irq = 54;
++//int dwc_irq = IFXMIPS_USB_OC_INT;
++
++extern int ifx_usb_hc_init(unsigned long base_addr, int irq);
++extern void ifx_usb_hc_remove(void);
++
++/*-------------------------------------------------------------------------*/
++/* Encapsulate the module parameter settings */
++
++static dwc_otg_core_params_t dwc_otg_module_params = {
++        .opt = -1,
++        .otg_cap = -1,
++        .dma_enable = -1,
++	.dma_burst_size = -1,
++	.speed = -1,
++	.host_support_fs_ls_low_power = -1,
++	.host_ls_low_power_phy_clk = -1,
++	.enable_dynamic_fifo = -1,
++	.data_fifo_size = -1,
++	.dev_rx_fifo_size = -1,
++	.dev_nperio_tx_fifo_size = -1,
++	.dev_perio_tx_fifo_size = /* dev_perio_tx_fifo_size_1 */ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},  /* 15 */
++	.host_rx_fifo_size = -1,
++	.host_nperio_tx_fifo_size = -1,
++	.host_perio_tx_fifo_size = -1,
++	.max_transfer_size = -1,
++	.max_packet_count = -1,
++	.host_channels = -1,
++	.dev_endpoints = -1,
++	.phy_type = -1,
++        .phy_utmi_width = -1,
++        .phy_ulpi_ddr = -1,
++        .phy_ulpi_ext_vbus = -1,
++	.i2c_enable = -1,
++	.ulpi_fs_ls = -1,
++	.ts_dline = -1,
++	.en_multiple_tx_fifo = -1,
++	.dev_tx_fifo_size = { /* dev_tx_fifo_size */
++     -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
++	}, /* 15 */
++	.thr_ctl = -1,
++	.tx_thr_length = -1,
++	.rx_thr_length = -1,
++};
++
++/**
++ * This function shows the Driver Version.
++ */
++static ssize_t version_show(struct device_driver *dev, char *buf)
++{
++        return snprintf(buf, sizeof(DWC_DRIVER_VERSION)+2,"%s\n", 
++                        DWC_DRIVER_VERSION);
++}
++static DRIVER_ATTR(version, S_IRUGO, version_show, NULL);
++
++/**
++ * Global Debug Level Mask.
++ */
++uint32_t g_dbg_lvl = 0xff; /* OFF */
++
++/**
++ * This function shows the driver Debug Level.
++ */
++static ssize_t dbg_level_show(struct device_driver *_drv, char *_buf)
++{
++        return sprintf(_buf, "0x%0x\n", g_dbg_lvl);
++}
++/**
++ * This function stores the driver Debug Level.
++ */
++static ssize_t dbg_level_store(struct device_driver *_drv, const char *_buf, 
++                               size_t _count)
++{
++	g_dbg_lvl = simple_strtoul(_buf, NULL, 16);
++        return _count;
++}
++static DRIVER_ATTR(debuglevel, S_IRUGO|S_IWUSR, dbg_level_show, dbg_level_store);
++
++/**
++ * This function is called during module intialization to verify that
++ * the module parameters are in a valid state.
++ */
++static int check_parameters(dwc_otg_core_if_t *core_if)
++{
++	int i;
++	int retval = 0;
++
++/* Checks if the parameter is outside of its valid range of values */
++#define DWC_OTG_PARAM_TEST(_param_,_low_,_high_) \
++	((dwc_otg_module_params._param_ < (_low_)) || \
++         (dwc_otg_module_params._param_ > (_high_)))
++
++/* If the parameter has been set by the user, check that the parameter value is
++ * within the value range of values.  If not, report a module error. */
++#define DWC_OTG_PARAM_ERR(_param_,_low_,_high_,_string_) \
++        do { \
++		if (dwc_otg_module_params._param_ != -1) { \
++			if (DWC_OTG_PARAM_TEST(_param_,(_low_),(_high_))) { \
++				DWC_ERROR("`%d' invalid for parameter `%s'\n", \
++					  dwc_otg_module_params._param_, _string_); \
++				dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \
++				retval ++; \
++			} \
++		} \
++	} while (0)
++
++	DWC_OTG_PARAM_ERR(opt,0,1,"opt");
++	DWC_OTG_PARAM_ERR(otg_cap,0,2,"otg_cap");
++        DWC_OTG_PARAM_ERR(dma_enable,0,1,"dma_enable");
++	DWC_OTG_PARAM_ERR(speed,0,1,"speed");
++	DWC_OTG_PARAM_ERR(host_support_fs_ls_low_power,0,1,"host_support_fs_ls_low_power");
++	DWC_OTG_PARAM_ERR(host_ls_low_power_phy_clk,0,1,"host_ls_low_power_phy_clk");
++	DWC_OTG_PARAM_ERR(enable_dynamic_fifo,0,1,"enable_dynamic_fifo");
++	DWC_OTG_PARAM_ERR(data_fifo_size,32,32768,"data_fifo_size");
++	DWC_OTG_PARAM_ERR(dev_rx_fifo_size,16,32768,"dev_rx_fifo_size");
++	DWC_OTG_PARAM_ERR(dev_nperio_tx_fifo_size,16,32768,"dev_nperio_tx_fifo_size");
++	DWC_OTG_PARAM_ERR(host_rx_fifo_size,16,32768,"host_rx_fifo_size");
++	DWC_OTG_PARAM_ERR(host_nperio_tx_fifo_size,16,32768,"host_nperio_tx_fifo_size");
++	DWC_OTG_PARAM_ERR(host_perio_tx_fifo_size,16,32768,"host_perio_tx_fifo_size");
++	DWC_OTG_PARAM_ERR(max_transfer_size,2047,524288,"max_transfer_size");
++	DWC_OTG_PARAM_ERR(max_packet_count,15,511,"max_packet_count");
++	DWC_OTG_PARAM_ERR(host_channels,1,16,"host_channels");
++	DWC_OTG_PARAM_ERR(dev_endpoints,1,15,"dev_endpoints");
++	DWC_OTG_PARAM_ERR(phy_type,0,2,"phy_type");
++        DWC_OTG_PARAM_ERR(phy_ulpi_ddr,0,1,"phy_ulpi_ddr");
++        DWC_OTG_PARAM_ERR(phy_ulpi_ext_vbus,0,1,"phy_ulpi_ext_vbus");
++	DWC_OTG_PARAM_ERR(i2c_enable,0,1,"i2c_enable");
++	DWC_OTG_PARAM_ERR(ulpi_fs_ls,0,1,"ulpi_fs_ls");
++	DWC_OTG_PARAM_ERR(ts_dline,0,1,"ts_dline");
++
++	if (dwc_otg_module_params.dma_burst_size != -1) {
++		if (DWC_OTG_PARAM_TEST(dma_burst_size,1,1) &&
++		    DWC_OTG_PARAM_TEST(dma_burst_size,4,4) &&
++		    DWC_OTG_PARAM_TEST(dma_burst_size,8,8) &&
++		    DWC_OTG_PARAM_TEST(dma_burst_size,16,16) &&
++		    DWC_OTG_PARAM_TEST(dma_burst_size,32,32) &&
++		    DWC_OTG_PARAM_TEST(dma_burst_size,64,64) &&
++		    DWC_OTG_PARAM_TEST(dma_burst_size,128,128) &&
++		    DWC_OTG_PARAM_TEST(dma_burst_size,256,256))
++		{
++			DWC_ERROR("`%d' invalid for parameter `dma_burst_size'\n", 
++				  dwc_otg_module_params.dma_burst_size);
++			dwc_otg_module_params.dma_burst_size = 32;
++			retval ++;
++		}
++	}
++
++	if (dwc_otg_module_params.phy_utmi_width != -1) {
++		if (DWC_OTG_PARAM_TEST(phy_utmi_width,8,8) &&
++		    DWC_OTG_PARAM_TEST(phy_utmi_width,16,16)) 
++		{
++			DWC_ERROR("`%d' invalid for parameter `phy_utmi_width'\n", 
++				  dwc_otg_module_params.phy_utmi_width);
++			//dwc_otg_module_params.phy_utmi_width = 16;
++			dwc_otg_module_params.phy_utmi_width = 8;
++			retval ++;
++		}
++	}
++
++	for (i=0; i<15; i++) {
++		/** @todo should be like above */
++		//DWC_OTG_PARAM_ERR(dev_perio_tx_fifo_size[i],4,768,"dev_perio_tx_fifo_size");
++		if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] != -1) {
++			if (DWC_OTG_PARAM_TEST(dev_perio_tx_fifo_size[i],4,768)) {
++				DWC_ERROR("`%d' invalid for parameter `%s_%d'\n",
++					  dwc_otg_module_params.dev_perio_tx_fifo_size[i], "dev_perio_tx_fifo_size", i);
++				dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default;
++				retval ++;
++			}
++		}
++	}
++
++	DWC_OTG_PARAM_ERR(en_multiple_tx_fifo, 0, 1, "en_multiple_tx_fifo");
++	for (i = 0; i < 15; i++) {
++		/** @todo should be like above */
++		    //DWC_OTG_PARAM_ERR(dev_tx_fifo_size[i],4,768,"dev_tx_fifo_size");
++		    if (dwc_otg_module_params.dev_tx_fifo_size[i] != -1) {
++			if (DWC_OTG_PARAM_TEST(dev_tx_fifo_size[i], 4, 768)) {
++				DWC_ERROR("`%d' invalid for parameter `%s_%d'\n",
++					dwc_otg_module_params.dev_tx_fifo_size[i],
++				     "dev_tx_fifo_size", i);
++				dwc_otg_module_params.dev_tx_fifo_size[i] =
++				    dwc_param_dev_tx_fifo_size_default;
++				retval++;
++			}
++		}
++	}
++	DWC_OTG_PARAM_ERR(thr_ctl, 0, 7, "thr_ctl");
++	DWC_OTG_PARAM_ERR(tx_thr_length, 8, 128, "tx_thr_length");
++	DWC_OTG_PARAM_ERR(rx_thr_length, 8, 128, "rx_thr_length");
++
++	/* At this point, all module parameters that have been set by the user
++	 * are valid, and those that have not are left unset.  Now set their
++	 * default values and/or check the parameters against the hardware
++	 * configurations of the OTG core. */
++
++
++
++/* This sets the parameter to the default value if it has not been set by the
++ * user */
++#define DWC_OTG_PARAM_SET_DEFAULT(_param_) \
++	({ \
++		int changed = 1; \
++		if (dwc_otg_module_params._param_ == -1) { \
++			changed = 0; \
++			dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \
++		} \
++		changed; \
++	})
++
++/* This checks the macro agains the hardware configuration to see if it is
++ * valid.  It is possible that the default value could be invalid.  In this
++ * case, it will report a module error if the user touched the parameter.
++ * Otherwise it will adjust the value without any error. */
++#define DWC_OTG_PARAM_CHECK_VALID(_param_,_str_,_is_valid_,_set_valid_) \
++	({ \
++	        int changed = DWC_OTG_PARAM_SET_DEFAULT(_param_); \
++		int error = 0; \
++		if (!(_is_valid_)) { \
++			if (changed) { \
++				DWC_ERROR("`%d' invalid for parameter `%s'.  Check HW configuration.\n", dwc_otg_module_params._param_,_str_); \
++				error = 1; \
++			} \
++			dwc_otg_module_params._param_ = (_set_valid_); \
++		} \
++		error; \
++	})
++
++	/* OTG Cap */
++	retval += DWC_OTG_PARAM_CHECK_VALID(otg_cap,"otg_cap",
++                  ({
++			  int valid;
++			  valid = 1;
++			  switch (dwc_otg_module_params.otg_cap) {
++			  case DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE:
++				  if (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) valid = 0;
++				  break;
++			  case DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE:
++				  if ((core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) &&
++				      (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) &&
++				      (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) &&
++				      (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST))
++				  {
++					  valid = 0;
++				  }
++				  break;
++			  case DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE:
++				  /* always valid */
++				  break;
++			  } 
++			  valid;
++		  }),
++                  (((core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) ||
++		    (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) ||
++		    (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
++		    (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) ?
++		   DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE :
++		   DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE));
++	
++	retval += DWC_OTG_PARAM_CHECK_VALID(dma_enable,"dma_enable",
++					    ((dwc_otg_module_params.dma_enable == 1) && (core_if->hwcfg2.b.architecture == 0)) ? 0 : 1, 
++					    0);
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(opt,"opt",
++					    1,
++					    0);
++
++	DWC_OTG_PARAM_SET_DEFAULT(dma_burst_size);
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(host_support_fs_ls_low_power,
++					    "host_support_fs_ls_low_power",
++					    1, 0);
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(enable_dynamic_fifo,
++				  "enable_dynamic_fifo",
++				  ((dwc_otg_module_params.enable_dynamic_fifo == 0) ||
++				   (core_if->hwcfg2.b.dynamic_fifo == 1)), 0);
++
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(data_fifo_size,
++				  "data_fifo_size",
++				  (dwc_otg_module_params.data_fifo_size <= core_if->hwcfg3.b.dfifo_depth),
++				  core_if->hwcfg3.b.dfifo_depth);
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(dev_rx_fifo_size,
++				  "dev_rx_fifo_size",
++				  (dwc_otg_module_params.dev_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)),
++				  dwc_read_reg32(&core_if->core_global_regs->grxfsiz));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(dev_nperio_tx_fifo_size,
++				  "dev_nperio_tx_fifo_size",
++				  (dwc_otg_module_params.dev_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)),
++				  (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(host_rx_fifo_size,
++					    "host_rx_fifo_size",
++					    (dwc_otg_module_params.host_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)),
++					    dwc_read_reg32(&core_if->core_global_regs->grxfsiz));
++
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(host_nperio_tx_fifo_size,
++				  "host_nperio_tx_fifo_size",
++				  (dwc_otg_module_params.host_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)),
++				  (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(host_perio_tx_fifo_size,
++					    "host_perio_tx_fifo_size",
++					    (dwc_otg_module_params.host_perio_tx_fifo_size <= ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16))),
++					    ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16)));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(max_transfer_size,
++				  "max_transfer_size",
++				  (dwc_otg_module_params.max_transfer_size < (1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11))),
++				  ((1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11)) - 1));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(max_packet_count,
++				  "max_packet_count",
++				  (dwc_otg_module_params.max_packet_count < (1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4))),
++				  ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(host_channels,
++				  "host_channels",
++				  (dwc_otg_module_params.host_channels <= (core_if->hwcfg2.b.num_host_chan + 1)),
++				  (core_if->hwcfg2.b.num_host_chan + 1));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(dev_endpoints,
++				  "dev_endpoints",
++				  (dwc_otg_module_params.dev_endpoints <= (core_if->hwcfg2.b.num_dev_ep)),
++				  core_if->hwcfg2.b.num_dev_ep);
++
++/*
++ * Define the following to disable the FS PHY Hardware checking.  This is for
++ * internal testing only.
++ *
++ * #define NO_FS_PHY_HW_CHECKS 
++ */
++
++#ifdef NO_FS_PHY_HW_CHECKS
++	retval += DWC_OTG_PARAM_CHECK_VALID(phy_type,
++					    "phy_type", 1, 0);
++#else
++	retval += DWC_OTG_PARAM_CHECK_VALID(phy_type,
++					    "phy_type",
++					    ({
++						    int valid = 0;
++						    if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_UTMI) &&
++							((core_if->hwcfg2.b.hs_phy_type == 1) || 
++							 (core_if->hwcfg2.b.hs_phy_type == 3)))
++						    {
++							    valid = 1;
++						    }
++						    else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_ULPI) &&
++							     ((core_if->hwcfg2.b.hs_phy_type == 2) || 
++							      (core_if->hwcfg2.b.hs_phy_type == 3)))
++						    {
++							    valid = 1;
++						    }
++						    else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) &&
++							     (core_if->hwcfg2.b.fs_phy_type == 1))
++						    {
++							    valid = 1;
++						    }
++						    valid;
++					    }),
++					    ({
++						    int set = DWC_PHY_TYPE_PARAM_FS;
++						    if (core_if->hwcfg2.b.hs_phy_type) { 
++							    if ((core_if->hwcfg2.b.hs_phy_type == 3) || 
++								(core_if->hwcfg2.b.hs_phy_type == 1)) {
++								    set = DWC_PHY_TYPE_PARAM_UTMI;
++							    }
++							    else {
++								    set = DWC_PHY_TYPE_PARAM_ULPI;
++							    }
++						    }
++						    set;
++					    }));
++#endif
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(speed,"speed",
++					    (dwc_otg_module_params.speed == 0) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1,
++					    dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS ? 1 : 0);
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(host_ls_low_power_phy_clk,
++					    "host_ls_low_power_phy_clk",
++					    ((dwc_otg_module_params.host_ls_low_power_phy_clk == DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1),
++					    ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ : DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ));
++
++        DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ddr);
++        DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ext_vbus);
++        DWC_OTG_PARAM_SET_DEFAULT(phy_utmi_width);
++        DWC_OTG_PARAM_SET_DEFAULT(ulpi_fs_ls);
++        DWC_OTG_PARAM_SET_DEFAULT(ts_dline);
++
++#ifdef NO_FS_PHY_HW_CHECKS
++	retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable,
++					    "i2c_enable", 1, 0);
++#else
++	retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable,
++					    "i2c_enable",
++					    (dwc_otg_module_params.i2c_enable == 1) && (core_if->hwcfg3.b.i2c == 0) ? 0 : 1,
++					    0);
++#endif
++
++	for (i=0; i<16; i++) {
++
++		int changed = 1;
++		int error = 0;
++
++		if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] == -1) {
++			changed = 0;
++			dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default;
++		}
++		if (!(dwc_otg_module_params.dev_perio_tx_fifo_size[i] <= (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) {
++			if (changed) {
++				DWC_ERROR("`%d' invalid for parameter `dev_perio_fifo_size_%d'.  Check HW configuration.\n", dwc_otg_module_params.dev_perio_tx_fifo_size[i],i);
++				error = 1;
++			}
++			dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]);
++		}
++		retval += error;
++	}
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(en_multiple_tx_fifo,
++				"en_multiple_tx_fifo",
++				((dwc_otg_module_params.en_multiple_tx_fifo == 1) &&
++				(core_if->hwcfg4.b.ded_fifo_en == 0)) ? 0 : 1, 0);
++
++	for (i = 0; i < 16; i++) {
++		int changed = 1;
++		int error = 0;
++		if (dwc_otg_module_params.dev_tx_fifo_size[i] == -1) {
++			changed = 0;
++			dwc_otg_module_params.dev_tx_fifo_size[i] =
++			    dwc_param_dev_tx_fifo_size_default;
++		}
++		if (!(dwc_otg_module_params.dev_tx_fifo_size[i] <=
++		     (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) {
++			if (changed) {
++				DWC_ERROR("%d' invalid for parameter `dev_perio_fifo_size_%d'."
++					"Check HW configuration.\n",dwc_otg_module_params.dev_tx_fifo_size[i],i);
++				error = 1;
++			}
++			dwc_otg_module_params.dev_tx_fifo_size[i] =
++			    dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]);
++		}
++		retval += error;
++	}
++	DWC_OTG_PARAM_SET_DEFAULT(thr_ctl);
++	DWC_OTG_PARAM_SET_DEFAULT(tx_thr_length);
++	DWC_OTG_PARAM_SET_DEFAULT(rx_thr_length);
++	return retval;
++} // check_parameters 
++
++
++/** 
++ * This function is the top level interrupt handler for the Common
++ * (Device and host modes) interrupts.
++ */
++static irqreturn_t dwc_otg_common_irq(int _irq, void *_dev)
++{
++	dwc_otg_device_t *otg_dev = _dev;
++	int32_t retval = IRQ_NONE;
++
++	retval = dwc_otg_handle_common_intr( otg_dev->core_if );
++
++	mask_and_ack_ifx_irq (_irq);
++    
++	return IRQ_RETVAL(retval);
++}
++
++
++/**
++ * This function is called when a DWC_OTG device is unregistered with the
++ * dwc_otg_driver. This happens, for example, when the rmmod command is
++ * executed. The device may or may not be electrically present. If it is
++ * present, the driver stops device processing. Any resources used on behalf
++ * of this device are freed.
++ *
++ * @return
++ */
++static int
++dwc_otg_driver_remove(struct platform_device *_dev)
++{
++    //dwc_otg_device_t *otg_dev = dev_get_drvdata(&_dev->dev);
++    dwc_otg_device_t *otg_dev = platform_get_drvdata(_dev);
++
++    DWC_DEBUGPL(DBG_ANY, "%s(%p)\n", __func__, _dev);
++
++    if (otg_dev == NULL) {
++        /* Memory allocation for the dwc_otg_device failed. */
++        return 0;
++    }
++
++    /*
++    * Free the IRQ 
++    */
++    if (otg_dev->common_irq_installed) {
++        free_irq( otg_dev->irq, otg_dev );
++    }
++
++#ifndef DWC_DEVICE_ONLY
++    if (otg_dev->hcd != NULL) {
++        dwc_otg_hcd_remove(&_dev->dev);
++    }
++#endif
++	printk("after removehcd\n");
++
++// Note: Integrate HOST and DEVICE(Gadget) is not planned yet.
++#ifndef DWC_HOST_ONLY
++    if (otg_dev->pcd != NULL) {
++        dwc_otg_pcd_remove(otg_dev);
++    }
++#endif
++    if (otg_dev->core_if != NULL) {
++        dwc_otg_cil_remove( otg_dev->core_if );
++    }
++	printk("after removecil\n");
++
++    /*
++     * Remove the device attributes
++     */
++    dwc_otg_attr_remove(&_dev->dev);
++	printk("after removeattr\n");
++
++    /*
++     * Return the memory.
++     */
++    if (otg_dev->base != NULL) {
++        iounmap(otg_dev->base);
++    }
++	if (otg_dev->phys_addr != 0) {
++		release_mem_region(otg_dev->phys_addr, otg_dev->base_len);
++	}
++    kfree(otg_dev);
++        
++    /*
++     * Clear the drvdata pointer.
++     */
++	//dev_set_drvdata(&_dev->dev, 0);
++    platform_set_drvdata(_dev, 0);
++    return 0;
++}
++
++/**
++ * This function is called when an DWC_OTG device is bound to a
++ * dwc_otg_driver. It creates the driver components required to
++ * control the device (CIL, HCD, and PCD) and it initializes the
++ * device. The driver components are stored in a dwc_otg_device
++ * structure. A reference to the dwc_otg_device is saved in the
++ * lm_device. This allows the driver to access the dwc_otg_device
++ * structure on subsequent calls to driver methods for this device.
++ *
++ * @return
++ */
++static int __devinit
++dwc_otg_driver_probe(struct platform_device *_dev)
++{
++	int retval = 0;
++	dwc_otg_device_t *dwc_otg_device;
++	int pin = (int)_dev->dev.platform_data;
++	int32_t	snpsid;
++	struct resource *res;
++	gusbcfg_data_t usbcfg = {.d32 = 0};
++
++	// GPIOs
++	if(pin >= 0)
++	{
++		gpio_request(pin, "usb_power");
++		gpio_direction_output(pin, 1);
++		gpio_set_value(pin, 1);
++		gpio_export(pin, 0);
++	}
++	dev_dbg(&_dev->dev, "dwc_otg_driver_probe (%p)\n", _dev);
++
++    dwc_otg_device = kmalloc(sizeof(dwc_otg_device_t), GFP_KERNEL);
++    if (dwc_otg_device == 0) {
++        dev_err(&_dev->dev, "kmalloc of dwc_otg_device failed\n");
++        retval = -ENOMEM;
++        goto fail;
++    }
++    memset(dwc_otg_device, 0, sizeof(*dwc_otg_device));
++    dwc_otg_device->reg_offset = 0xFFFFFFFF;
++
++    /*
++     * Retrieve the memory and IRQ resources.
++     */
++	dwc_otg_device->irq = platform_get_irq(_dev, 0);
++	if (dwc_otg_device->irq == 0) {
++		dev_err(&_dev->dev, "no device irq\n");
++		retval = -ENODEV;
++		goto fail;
++	}
++	dev_dbg(&_dev->dev, "OTG - device irq: %d\n", dwc_otg_device->irq);
++	res = platform_get_resource(_dev, IORESOURCE_MEM, 0);
++	if (res == NULL) {
++		dev_err(&_dev->dev, "no CSR address\n");
++		retval = -ENODEV;
++		goto fail;
++	}
++	dev_dbg(&_dev->dev, "OTG - ioresource_mem start0x%08x: end:0x%08x\n",
++		(unsigned)res->start, (unsigned)res->end);
++	dwc_otg_device->phys_addr = res->start;
++	dwc_otg_device->base_len = res->end - res->start + 1;
++	if (request_mem_region(dwc_otg_device->phys_addr, dwc_otg_device->base_len,
++	    dwc_driver_name) == NULL) {
++		dev_err(&_dev->dev, "request_mem_region failed\n");
++		retval = -EBUSY;
++		goto fail;
++	}
++
++	/*
++     * Map the DWC_otg Core memory into virtual address space.
++     */
++    dwc_otg_device->base = ioremap_nocache(dwc_otg_device->phys_addr, dwc_otg_device->base_len);
++    if (dwc_otg_device->base == NULL)    {
++        dev_err(&_dev->dev, "ioremap() failed\n");
++        retval = -ENOMEM;
++        goto fail;
++    }
++    dev_dbg(&_dev->dev, "mapped base=0x%08x\n", (unsigned)dwc_otg_device->base);
++
++    /*
++     * Attempt to ensure this device is really a DWC_otg Controller.
++     * Read and verify the SNPSID register contents. The value should be
++     * 0x45F42XXX, which corresponds to "OT2", as in "OTG version 2.XX".
++     */
++    snpsid = dwc_read_reg32((uint32_t *)((uint8_t *)dwc_otg_device->base + 0x40));
++    if ((snpsid & 0xFFFFF000) != 0x4F542000) {
++        dev_err(&_dev->dev, "Bad value for SNPSID: 0x%08x\n", snpsid);
++        retval = -EINVAL;
++        goto fail;
++    }
++
++    /*
++     * Initialize driver data to point to the global DWC_otg
++     * Device structure.
++     */
++    platform_set_drvdata(_dev, dwc_otg_device);
++    dev_dbg(&_dev->dev, "dwc_otg_device=0x%p\n", dwc_otg_device);
++    dwc_otg_device->core_if = dwc_otg_cil_init( dwc_otg_device->base, &dwc_otg_module_params);
++    if (dwc_otg_device->core_if == 0) {
++        dev_err(&_dev->dev, "CIL initialization failed!\n");
++        retval = -ENOMEM;
++        goto fail;
++    }
++	
++    /*
++     * Validate parameter values.
++     */
++    if (check_parameters(dwc_otg_device->core_if) != 0) {
++        retval = -EINVAL;
++        goto fail;
++    }
++
++	/* Added for PLB DMA phys virt mapping */
++	//dwc_otg_device->core_if->phys_addr = dwc_otg_device->phys_addr;
++    /*
++     * Create Device Attributes in sysfs
++     */  
++    dwc_otg_attr_create (&_dev->dev);
++
++    /*
++     * Disable the global interrupt until all the interrupt
++     * handlers are installed.
++     */
++    dwc_otg_disable_global_interrupts( dwc_otg_device->core_if );
++    /*
++     * Install the interrupt handler for the common interrupts before
++     * enabling common interrupts in core_init below.
++     */
++    DWC_DEBUGPL( DBG_CIL, "registering (common) handler for irq%d\n", dwc_otg_device->irq);
++
++    retval = request_irq((unsigned int)dwc_otg_device->irq, dwc_otg_common_irq,
++        //SA_INTERRUPT|SA_SHIRQ, "dwc_otg", (void *)dwc_otg_device );
++        IRQF_SHARED, "dwc_otg", (void *)dwc_otg_device );
++        //IRQF_DISABLED, "dwc_otg", (void *)dwc_otg_device );
++    if (retval != 0) {
++        DWC_ERROR("request of irq%d failed retval: %d\n", dwc_otg_device->irq, retval);
++        retval = -EBUSY;
++        goto fail;
++    } else {
++        dwc_otg_device->common_irq_installed = 1;
++    }
++
++    /*
++     * Initialize the DWC_otg core.
++     */
++    dwc_otg_core_init( dwc_otg_device->core_if );
++
++
++#ifndef DWC_HOST_ONLY  // otg device mode. (gadget.)
++    /*
++     * Initialize the PCD
++     */
++    retval = dwc_otg_pcd_init(dwc_otg_device);
++    if (retval != 0) {
++        DWC_ERROR("dwc_otg_pcd_init failed\n");
++        dwc_otg_device->pcd = NULL;
++        goto fail;
++    }
++#endif // DWC_HOST_ONLY
++
++#ifndef DWC_DEVICE_ONLY // otg host mode. (HCD)
++    /*
++     * Initialize the HCD
++     */
++#if 1	/*fscz*/
++	/* force_host_mode */
++	usbcfg.d32 = dwc_read_reg32(&dwc_otg_device->core_if->core_global_regs ->gusbcfg);
++	usbcfg.b.force_host_mode = 1;
++	dwc_write_reg32(&dwc_otg_device->core_if->core_global_regs ->gusbcfg, usbcfg.d32);
++#endif
++    retval = dwc_otg_hcd_init(&_dev->dev, dwc_otg_device);
++    if (retval != 0) {
++        DWC_ERROR("dwc_otg_hcd_init failed\n");
++        dwc_otg_device->hcd = NULL;
++        goto fail;
++    }
++#endif // DWC_DEVICE_ONLY
++
++    /*
++     * Enable the global interrupt after all the interrupt
++     * handlers are installed.
++     */
++    dwc_otg_enable_global_interrupts( dwc_otg_device->core_if );
++#if 0	/*fscz*/
++	usbcfg.d32 = dwc_read_reg32(&dwc_otg_device->core_if->core_global_regs ->gusbcfg);
++	usbcfg.b.force_host_mode = 0;
++	dwc_write_reg32(&dwc_otg_device->core_if->core_global_regs ->gusbcfg, usbcfg.d32);
++#endif
++
++
++    return 0;
++
++fail:
++    dwc_otg_driver_remove(_dev);
++    return retval;
++}
++
++/** 
++ * This structure defines the methods to be called by a bus driver
++ * during the lifecycle of a device on that bus. Both drivers and
++ * devices are registered with a bus driver. The bus driver matches
++ * devices to drivers based on information in the device and driver
++ * structures.
++ *
++ * The probe function is called when the bus driver matches a device
++ * to this driver. The remove function is called when a device is
++ * unregistered with the bus driver.
++ */
++struct platform_driver dwc_otg_driver = {
++	.probe	= dwc_otg_driver_probe,
++	.remove	= dwc_otg_driver_remove,
++//	.suspend = dwc_otg_driver_suspend,
++//	.resume = dwc_otg_driver_resume,
++	.driver = {
++		.name = dwc_driver_name,
++		.owner = THIS_MODULE,
++	},
++};
++EXPORT_SYMBOL(dwc_otg_driver);
++
++/**
++ * This function is called when the dwc_otg_driver is installed with the
++ * insmod command. It registers the dwc_otg_driver structure with the
++ * appropriate bus driver. This will cause the dwc_otg_driver_probe function
++ * to be called. In addition, the bus driver will automatically expose
++ * attributes defined for the device and driver in the special sysfs file
++ * system.
++ *
++ * @return
++ */
++static int __init dwc_otg_init(void) 
++{
++    int retval = 0;
++
++    printk(KERN_INFO "%s: version %s\n", dwc_driver_name, DWC_DRIVER_VERSION);
++
++	// ifxmips setup
++    retval = ifx_usb_hc_init(dwc_iomem_base, dwc_irq);
++    if (retval < 0)
++    {
++        printk(KERN_ERR "%s retval=%d\n", __func__, retval);
++        return retval;
++    }
++    dwc_otg_power_on(); // ifx only!!
++
++
++    retval = platform_driver_register(&dwc_otg_driver);
++
++    if (retval < 0) {
++        printk(KERN_ERR "%s retval=%d\n", __func__, retval);
++        goto error1;
++    }
++
++    retval = driver_create_file(&dwc_otg_driver.driver, &driver_attr_version);
++    if (retval < 0)
++    {
++        printk(KERN_ERR "%s retval=%d\n", __func__, retval);
++        goto error2;
++    }
++    retval = driver_create_file(&dwc_otg_driver.driver, &driver_attr_debuglevel);
++    if (retval < 0)
++    {
++        printk(KERN_ERR "%s retval=%d\n", __func__, retval);
++        goto error3;
++    }
++    return retval;
++
++
++error3:
++    driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version);
++error2:
++    driver_unregister(&dwc_otg_driver.driver);
++error1:
++    ifx_usb_hc_remove();
++    return retval;
++}
++module_init(dwc_otg_init);
++
++/** 
++ * This function is called when the driver is removed from the kernel
++ * with the rmmod command. The driver unregisters itself with its bus
++ * driver.
++ *
++ */
++static void __exit dwc_otg_cleanup(void)
++{
++    printk(KERN_DEBUG "dwc_otg_cleanup()\n");
++
++    driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel);
++    driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version);
++
++    platform_driver_unregister(&dwc_otg_driver);
++    ifx_usb_hc_remove();
++
++    printk(KERN_INFO "%s module removed\n", dwc_driver_name);
++}
++module_exit(dwc_otg_cleanup);
++
++MODULE_DESCRIPTION(DWC_DRIVER_DESC);
++MODULE_AUTHOR("Synopsys Inc.");
++MODULE_LICENSE("GPL");
++
++module_param_named(otg_cap, dwc_otg_module_params.otg_cap, int, 0444);
++MODULE_PARM_DESC(otg_cap, "OTG Capabilities 0=HNP&SRP 1=SRP Only 2=None");
++module_param_named(opt, dwc_otg_module_params.opt, int, 0444);
++MODULE_PARM_DESC(opt, "OPT Mode");
++module_param_named(dma_enable, dwc_otg_module_params.dma_enable, int, 0444);
++MODULE_PARM_DESC(dma_enable, "DMA Mode 0=Slave 1=DMA enabled");
++module_param_named(dma_burst_size, dwc_otg_module_params.dma_burst_size, int, 0444);
++MODULE_PARM_DESC(dma_burst_size, "DMA Burst Size 1, 4, 8, 16, 32, 64, 128, 256");
++module_param_named(speed, dwc_otg_module_params.speed, int, 0444);
++MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed");
++module_param_named(host_support_fs_ls_low_power, dwc_otg_module_params.host_support_fs_ls_low_power, int, 0444);
++MODULE_PARM_DESC(host_support_fs_ls_low_power, "Support Low Power w/FS or LS 0=Support 1=Don't Support");
++module_param_named(host_ls_low_power_phy_clk, dwc_otg_module_params.host_ls_low_power_phy_clk, int, 0444);
++MODULE_PARM_DESC(host_ls_low_power_phy_clk, "Low Speed Low Power Clock 0=48Mhz 1=6Mhz");
++module_param_named(enable_dynamic_fifo, dwc_otg_module_params.enable_dynamic_fifo, int, 0444);
++MODULE_PARM_DESC(enable_dynamic_fifo, "0=cC Setting 1=Allow Dynamic Sizing");
++module_param_named(data_fifo_size, dwc_otg_module_params.data_fifo_size, int, 0444);
++MODULE_PARM_DESC(data_fifo_size, "Total number of words in the data FIFO memory 32-32768");
++module_param_named(dev_rx_fifo_size, dwc_otg_module_params.dev_rx_fifo_size, int, 0444);
++MODULE_PARM_DESC(dev_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
++module_param_named(dev_nperio_tx_fifo_size, dwc_otg_module_params.dev_nperio_tx_fifo_size, int, 0444);
++MODULE_PARM_DESC(dev_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
++module_param_named(dev_perio_tx_fifo_size_1, dwc_otg_module_params.dev_perio_tx_fifo_size[0], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_1, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_2, dwc_otg_module_params.dev_perio_tx_fifo_size[1], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_2, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_3, dwc_otg_module_params.dev_perio_tx_fifo_size[2], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_3, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_4, dwc_otg_module_params.dev_perio_tx_fifo_size[3], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_4, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_5, dwc_otg_module_params.dev_perio_tx_fifo_size[4], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_5, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_6, dwc_otg_module_params.dev_perio_tx_fifo_size[5], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_6, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_7, dwc_otg_module_params.dev_perio_tx_fifo_size[6], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_7, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_8, dwc_otg_module_params.dev_perio_tx_fifo_size[7], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_8, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_9, dwc_otg_module_params.dev_perio_tx_fifo_size[8], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_9, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_10, dwc_otg_module_params.dev_perio_tx_fifo_size[9], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_10, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_11, dwc_otg_module_params.dev_perio_tx_fifo_size[10], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_11, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_12, dwc_otg_module_params.dev_perio_tx_fifo_size[11], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_12, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_13, dwc_otg_module_params.dev_perio_tx_fifo_size[12], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_13, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_14, dwc_otg_module_params.dev_perio_tx_fifo_size[13], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_14, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_15, dwc_otg_module_params.dev_perio_tx_fifo_size[14], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_15, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(host_rx_fifo_size, dwc_otg_module_params.host_rx_fifo_size, int, 0444);
++MODULE_PARM_DESC(host_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
++module_param_named(host_nperio_tx_fifo_size, dwc_otg_module_params.host_nperio_tx_fifo_size, int, 0444);
++MODULE_PARM_DESC(host_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
++module_param_named(host_perio_tx_fifo_size, dwc_otg_module_params.host_perio_tx_fifo_size, int, 0444);
++MODULE_PARM_DESC(host_perio_tx_fifo_size, "Number of words in the host periodic Tx FIFO 16-32768");
++module_param_named(max_transfer_size, dwc_otg_module_params.max_transfer_size, int, 0444);
++/** @todo Set the max to 512K, modify checks */
++MODULE_PARM_DESC(max_transfer_size, "The maximum transfer size supported in bytes 2047-65535");
++module_param_named(max_packet_count, dwc_otg_module_params.max_packet_count, int, 0444);
++MODULE_PARM_DESC(max_packet_count, "The maximum number of packets in a transfer 15-511");
++module_param_named(host_channels, dwc_otg_module_params.host_channels, int, 0444);
++MODULE_PARM_DESC(host_channels, "The number of host channel registers to use 1-16");
++module_param_named(dev_endpoints, dwc_otg_module_params.dev_endpoints, int, 0444);
++MODULE_PARM_DESC(dev_endpoints, "The number of endpoints in addition to EP0 available for device mode 1-15");
++module_param_named(phy_type, dwc_otg_module_params.phy_type, int, 0444);
++MODULE_PARM_DESC(phy_type, "0=Reserved 1=UTMI+ 2=ULPI");
++module_param_named(phy_utmi_width, dwc_otg_module_params.phy_utmi_width, int, 0444);
++MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits");
++module_param_named(phy_ulpi_ddr, dwc_otg_module_params.phy_ulpi_ddr, int, 0444);
++MODULE_PARM_DESC(phy_ulpi_ddr, "ULPI at double or single data rate 0=Single 1=Double");
++module_param_named(phy_ulpi_ext_vbus, dwc_otg_module_params.phy_ulpi_ext_vbus, int, 0444);
++MODULE_PARM_DESC(phy_ulpi_ext_vbus, "ULPI PHY using internal or external vbus 0=Internal");
++module_param_named(i2c_enable, dwc_otg_module_params.i2c_enable, int, 0444);
++MODULE_PARM_DESC(i2c_enable, "FS PHY Interface");
++module_param_named(ulpi_fs_ls, dwc_otg_module_params.ulpi_fs_ls, int, 0444);
++MODULE_PARM_DESC(ulpi_fs_ls, "ULPI PHY FS/LS mode only");
++module_param_named(ts_dline, dwc_otg_module_params.ts_dline, int, 0444);
++MODULE_PARM_DESC(ts_dline, "Term select Dline pulsing for all PHYs");
++module_param_named(debug, g_dbg_lvl, int, 0444);
++MODULE_PARM_DESC(debug, "0");
++module_param_named(en_multiple_tx_fifo,
++		     dwc_otg_module_params.en_multiple_tx_fifo, int, 0444);
++MODULE_PARM_DESC(en_multiple_tx_fifo,
++		  "Dedicated Non Periodic Tx FIFOs 0=disabled 1=enabled");
++module_param_named(dev_tx_fifo_size_1,
++		    dwc_otg_module_params.dev_tx_fifo_size[0], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_1, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_2,
++		    dwc_otg_module_params.dev_tx_fifo_size[1], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_2, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_3,
++		    dwc_otg_module_params.dev_tx_fifo_size[2], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_3, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_4,
++		    dwc_otg_module_params.dev_tx_fifo_size[3], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_4, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_5,
++		    dwc_otg_module_params.dev_tx_fifo_size[4], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_5, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_6,
++		    dwc_otg_module_params.dev_tx_fifo_size[5], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_6, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_7,
++		    dwc_otg_module_params.dev_tx_fifo_size[6], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_7, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_8,
++		    dwc_otg_module_params.dev_tx_fifo_size[7], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_8, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_9,
++		    dwc_otg_module_params.dev_tx_fifo_size[8], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_9, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_10,
++		    dwc_otg_module_params.dev_tx_fifo_size[9], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_10, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_11,
++		    dwc_otg_module_params.dev_tx_fifo_size[10], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_11, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_12,
++		    dwc_otg_module_params.dev_tx_fifo_size[11], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_12, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_13,
++		    dwc_otg_module_params.dev_tx_fifo_size[12], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_13, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_14,
++		    dwc_otg_module_params.dev_tx_fifo_size[13], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_14, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_15,
++		    dwc_otg_module_params.dev_tx_fifo_size[14], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_15, "Number of words in the Tx FIFO 4-768");
++module_param_named(thr_ctl, dwc_otg_module_params.thr_ctl, int, 0444);
++MODULE_PARM_DESC(thr_ctl, "Thresholding enable flag bit"
++		"0 - non ISO Tx thr., 1 - ISO Tx thr., 2 - Rx thr.- bit 0=disabled 1=enabled");
++module_param_named(tx_thr_length, dwc_otg_module_params.tx_thr_length, int, 0444);
++MODULE_PARM_DESC(tx_thr_length, "Tx Threshold length in 32 bit DWORDs");
++module_param_named(rx_thr_length, dwc_otg_module_params.rx_thr_length, int, 0444);
++MODULE_PARM_DESC(rx_thr_length, "Rx Threshold length in 32 bit DWORDs");
++module_param_named (iomem_base, dwc_iomem_base, ulong, 0444);
++MODULE_PARM_DESC (dwc_iomem_base, "The base address of the DWC_OTG register.");
++module_param_named (irq, dwc_irq, int, 0444);
++MODULE_PARM_DESC (dwc_irq, "The interrupt number");
++
++/** @page "Module Parameters"
++ *
++ * The following parameters may be specified when starting the module.
++ * These parameters define how the DWC_otg controller should be
++ * configured.  Parameter values are passed to the CIL initialization
++ * function dwc_otg_cil_init
++ *
++ * Example: <code>modprobe dwc_otg speed=1 otg_cap=1</code>
++ *
++ 
++ <table>
++ <tr><td>Parameter Name</td><td>Meaning</td></tr> 
++ 
++ <tr>
++ <td>otg_cap</td>
++ <td>Specifies the OTG capabilities. The driver will automatically detect the
++ value for this parameter if none is specified.
++ - 0: HNP and SRP capable (default, if available)
++ - 1: SRP Only capable
++ - 2: No HNP/SRP capable
++ </td></tr>
++ 
++ <tr>
++ <td>dma_enable</td>
++ <td>Specifies whether to use slave or DMA mode for accessing the data FIFOs.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: Slave
++ - 1: DMA (default, if available)
++ </td></tr>
++ 
++ <tr>
++ <td>dma_burst_size</td>
++ <td>The DMA Burst size (applicable only for External DMA Mode).
++ - Values: 1, 4, 8 16, 32, 64, 128, 256 (default 32)
++ </td></tr>
++ 
++ <tr>
++ <td>speed</td>
++ <td>Specifies the maximum speed of operation in host and device mode. The
++ actual speed depends on the speed of the attached device and the value of
++ phy_type.
++ - 0: High Speed (default)
++ - 1: Full Speed
++ </td></tr>
++ 
++ <tr>
++ <td>host_support_fs_ls_low_power</td>
++ <td>Specifies whether low power mode is supported when attached to a Full
++ Speed or Low Speed device in host mode.
++ - 0: Don't support low power mode (default)
++ - 1: Support low power mode
++ </td></tr>
++ 
++ <tr>
++ <td>host_ls_low_power_phy_clk</td>
++ <td>Specifies the PHY clock rate in low power mode when connected to a Low
++ Speed device in host mode. This parameter is applicable only if
++ HOST_SUPPORT_FS_LS_LOW_POWER is enabled.
++ - 0: 48 MHz (default)
++ - 1: 6 MHz
++ </td></tr>
++ 
++ <tr>
++ <td>enable_dynamic_fifo</td>
++ <td> Specifies whether FIFOs may be resized by the driver software.
++ - 0: Use cC FIFO size parameters
++ - 1: Allow dynamic FIFO sizing (default)
++ </td></tr>
++ 
++ <tr>
++ <td>data_fifo_size</td>
++ <td>Total number of 4-byte words in the data FIFO memory. This memory
++ includes the Rx FIFO, non-periodic Tx FIFO, and periodic Tx FIFOs.
++ - Values: 32 to 32768 (default 8192)
++
++ Note: The total FIFO memory depth in the FPGA configuration is 8192.
++ </td></tr>
++ 
++ <tr>
++ <td>dev_rx_fifo_size</td>
++ <td>Number of 4-byte words in the Rx FIFO in device mode when dynamic
++ FIFO sizing is enabled.
++ - Values: 16 to 32768 (default 1064)
++ </td></tr>
++ 
++ <tr>
++ <td>dev_nperio_tx_fifo_size</td>
++ <td>Number of 4-byte words in the non-periodic Tx FIFO in device mode when
++ dynamic FIFO sizing is enabled.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++ 
++ <tr>
++ <td>dev_perio_tx_fifo_size_n (n = 1 to 15)</td>
++ <td>Number of 4-byte words in each of the periodic Tx FIFOs in device mode
++ when dynamic FIFO sizing is enabled.
++ - Values: 4 to 768 (default 256)
++ </td></tr>
++ 
++ <tr>
++ <td>host_rx_fifo_size</td>
++ <td>Number of 4-byte words in the Rx FIFO in host mode when dynamic FIFO
++ sizing is enabled.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++ 
++ <tr>
++ <td>host_nperio_tx_fifo_size</td>
++ <td>Number of 4-byte words in the non-periodic Tx FIFO in host mode when
++ dynamic FIFO sizing is enabled in the core.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++ 
++ <tr>
++ <td>host_perio_tx_fifo_size</td>
++ <td>Number of 4-byte words in the host periodic Tx FIFO when dynamic FIFO
++ sizing is enabled.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++ 
++ <tr>
++ <td>max_transfer_size</td>
++ <td>The maximum transfer size supported in bytes.
++ - Values: 2047 to 65,535 (default 65,535)
++ </td></tr>
++ 
++ <tr>
++ <td>max_packet_count</td>
++ <td>The maximum number of packets in a transfer.
++ - Values: 15 to 511 (default 511)
++ </td></tr>
++ 
++ <tr>
++ <td>host_channels</td>
++ <td>The number of host channel registers to use.
++ - Values: 1 to 16 (default 12)
++
++ Note: The FPGA configuration supports a maximum of 12 host channels.
++ </td></tr>
++ 
++ <tr>
++ <td>dev_endpoints</td>
++ <td>The number of endpoints in addition to EP0 available for device mode
++ operations.
++ - Values: 1 to 15 (default 6 IN and OUT)
++
++ Note: The FPGA configuration supports a maximum of 6 IN and OUT endpoints in
++ addition to EP0.
++ </td></tr>
++ 
++ <tr>
++ <td>phy_type</td>
++ <td>Specifies the type of PHY interface to use. By default, the driver will
++ automatically detect the phy_type.
++ - 0: Full Speed
++ - 1: UTMI+ (default, if available)
++ - 2: ULPI
++ </td></tr>
++ 
++ <tr>
++ <td>phy_utmi_width</td>
++ <td>Specifies the UTMI+ Data Width. This parameter is applicable for a
++ phy_type of UTMI+. Also, this parameter is applicable only if the
++ OTG_HSPHY_WIDTH cC parameter was set to "8 and 16 bits", meaning that the
++ core has been configured to work at either data path width.
++ - Values: 8 or 16 bits (default 16)
++ </td></tr>
++ 
++ <tr>
++ <td>phy_ulpi_ddr</td>
++ <td>Specifies whether the ULPI operates at double or single data rate. This
++ parameter is only applicable if phy_type is ULPI.
++ - 0: single data rate ULPI interface with 8 bit wide data bus (default)
++ - 1: double data rate ULPI interface with 4 bit wide data bus
++ </td></tr>
++
++ <tr>
++ <td>i2c_enable</td>
++ <td>Specifies whether to use the I2C interface for full speed PHY. This
++ parameter is only applicable if PHY_TYPE is FS.
++ - 0: Disabled (default)
++ - 1: Enabled
++ </td></tr>
++
++ <tr>
++ <td>otg_en_multiple_tx_fifo</td>
++ <td>Specifies whether dedicatedto tx fifos are enabled for non periodic IN EPs.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: Disabled
++ - 1: Enabled (default, if available)
++ </td></tr>
++
++ <tr>
++ <td>dev_tx_fifo_size_n (n = 1 to 15)</td>
++ <td>Number of 4-byte words in each of the Tx FIFOs in device mode
++ when dynamic FIFO sizing is enabled.
++ - Values: 4 to 768 (default 256)
++ </td></tr>
++
++*/
+diff --git a/drivers/usb/dwc_otg/dwc_otg_driver.h b/drivers/usb/dwc_otg/dwc_otg_driver.h
+new file mode 100644
+index 0000000..7e6940d
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_driver.h
+@@ -0,0 +1,84 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_driver.h $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 510275 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_OTG_DRIVER_H__)
++#define __DWC_OTG_DRIVER_H__
++
++/** @file
++ * This file contains the interface to the Linux driver.
++ */
++#include "dwc_otg_cil.h"
++
++/* Type declarations */
++struct dwc_otg_pcd;
++struct dwc_otg_hcd;
++
++/**
++ * This structure is a wrapper that encapsulates the driver components used to
++ * manage a single DWC_otg controller.
++ */
++typedef struct dwc_otg_device
++{
++    /** Base address returned from ioremap() */
++    void *base;
++    
++    /** Pointer to the core interface structure. */
++    dwc_otg_core_if_t *core_if;
++
++    /** Register offset for Diagnostic API.*/
++    uint32_t reg_offset;
++
++    /** Pointer to the PCD structure. */
++    struct dwc_otg_pcd *pcd;
++
++    /** Pointer to the HCD structure. */
++    struct dwc_otg_hcd *hcd;
++
++    /** Flag to indicate whether the common IRQ handler is installed. */
++    uint8_t common_irq_installed;
++
++    /** Interrupt request number. */
++	unsigned int irq;
++
++    /** Physical address of Control and Status registers, used by
++     *  release_mem_region().
++     */
++	resource_size_t phys_addr;
++
++    /** Length of memory region, used by release_mem_region(). */
++	unsigned long base_len;
++} dwc_otg_device_t;
++
++//#define dev_dbg(fake, format, arg...) printk(KERN_CRIT __FILE__ ":%d: " format "\n" , __LINE__, ## arg)
++
++#endif
+diff --git a/drivers/usb/dwc_otg/dwc_otg_hcd.c b/drivers/usb/dwc_otg/dwc_otg_hcd.c
+new file mode 100644
+index 0000000..ad6bc72
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_hcd.c
+@@ -0,0 +1,2870 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd.c $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 631780 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++/**
++ * @file
++ *
++ * This file contains the implementation of the HCD. In Linux, the HCD
++ * implements the hc_driver API.
++ */
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++
++#include <linux/device.h>
++
++#include <linux/errno.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/string.h>
++
++#include <linux/dma-mapping.h>
++
++#include "dwc_otg_driver.h"
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_regs.h"
++
++#include <asm/irq.h>
++#include "dwc_otg_ifx.h" // for Infineon platform specific.
++extern atomic_t release_later;
++
++static u64 dma_mask = DMA_BIT_MASK(32);
++
++static const char dwc_otg_hcd_name [] = "dwc_otg_hcd";
++static const struct hc_driver dwc_otg_hc_driver = 
++{
++	.description =		dwc_otg_hcd_name,
++	.product_desc = 	"DWC OTG Controller",
++	.hcd_priv_size = 	sizeof(dwc_otg_hcd_t),
++	.irq =			dwc_otg_hcd_irq,
++	.flags =		HCD_MEMORY | HCD_USB2,
++	//.reset =
++	.start =		dwc_otg_hcd_start,
++	//.suspend =		
++	//.resume =		
++	.stop =			dwc_otg_hcd_stop,
++	.urb_enqueue =		dwc_otg_hcd_urb_enqueue,
++	.urb_dequeue =		dwc_otg_hcd_urb_dequeue,
++	.endpoint_disable =	dwc_otg_hcd_endpoint_disable,
++	.get_frame_number =	dwc_otg_hcd_get_frame_number,
++	.hub_status_data =	dwc_otg_hcd_hub_status_data,
++	.hub_control =		dwc_otg_hcd_hub_control,
++	//.hub_suspend =	
++	//.hub_resume =		
++};
++
++
++/**
++ * Work queue function for starting the HCD when A-Cable is connected.
++ * The dwc_otg_hcd_start() must be called in a process context.
++ */
++static void hcd_start_func(struct work_struct *work)
++{
++	struct dwc_otg_hcd *priv =
++		container_of(work, struct dwc_otg_hcd, start_work);
++	struct usb_hcd *usb_hcd = (struct usb_hcd *)priv->_p;
++	DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, usb_hcd);
++	if (usb_hcd) {
++		dwc_otg_hcd_start(usb_hcd);
++	}
++}
++
++
++/**
++ * HCD Callback function for starting the HCD when A-Cable is
++ * connected.
++ *
++ * @param _p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_start_cb(void *_p)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(_p);
++	dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
++	hprt0_data_t hprt0;
++	if (core_if->op_state == B_HOST) {
++		/* 
++		 * Reset the port.  During a HNP mode switch the reset
++		 * needs to occur within 1ms and have a duration of at
++		 * least 50ms. 
++		 */
++		hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++		hprt0.b.prtrst = 1;
++		dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++		((struct usb_hcd *)_p)->self.is_b_host = 1;
++	} else {
++		((struct usb_hcd *)_p)->self.is_b_host = 0;
++	}
++	/* Need to start the HCD in a non-interrupt context. */
++	INIT_WORK(&dwc_otg_hcd->start_work, hcd_start_func);
++	dwc_otg_hcd->_p = _p;
++	schedule_work(&dwc_otg_hcd->start_work);
++	return 1;
++}
++
++
++/**
++ * HCD Callback function for stopping the HCD.
++ *
++ * @param _p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_stop_cb( void *_p )
++{
++	struct usb_hcd *usb_hcd = (struct usb_hcd *)_p;
++	DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p);
++	dwc_otg_hcd_stop( usb_hcd );
++	return 1;
++}
++static void del_xfer_timers(dwc_otg_hcd_t *_hcd)
++{
++#ifdef DEBUG
++	int i;
++	int num_channels = _hcd->core_if->core_params->host_channels;
++	for (i = 0; i < num_channels; i++) {
++		del_timer(&_hcd->core_if->hc_xfer_timer[i]);
++	}
++#endif	/*  */
++}
++
++static void del_timers(dwc_otg_hcd_t *_hcd)
++{
++	del_xfer_timers(_hcd);
++	del_timer(&_hcd->conn_timer);
++}
++
++/**
++ * Processes all the URBs in a single list of QHs. Completes them with
++ * -ETIMEDOUT and frees the QTD.
++ */
++static void kill_urbs_in_qh_list(dwc_otg_hcd_t * _hcd,
++		struct list_head *_qh_list)
++{
++	struct list_head	*qh_item;
++	dwc_otg_qh_t		*qh;
++	struct list_head	*qtd_item;
++	dwc_otg_qtd_t		*qtd;
++
++	list_for_each(qh_item, _qh_list) {
++		qh = list_entry(qh_item, dwc_otg_qh_t, qh_list_entry);
++		for (qtd_item = qh->qtd_list.next; qtd_item != &qh->qtd_list;
++				qtd_item = qh->qtd_list.next) {
++			qtd = list_entry(qtd_item, dwc_otg_qtd_t, qtd_list_entry);
++			if (qtd->urb != NULL) {
++				dwc_otg_hcd_complete_urb(_hcd, qtd->urb,-ETIMEDOUT);
++			}
++			dwc_otg_hcd_qtd_remove_and_free(qtd);
++		}
++	}
++}
++
++/**
++ * Responds with an error status of ETIMEDOUT to all URBs in the non-periodic
++ * and periodic schedules. The QTD associated with each URB is removed from
++ * the schedule and freed. This function may be called when a disconnect is
++ * detected or when the HCD is being stopped.
++ */
++static void kill_all_urbs(dwc_otg_hcd_t *_hcd)
++{
++	kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_deferred);
++	kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_inactive);
++	kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_active);
++	kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_inactive);
++	kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_ready);
++	kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_assigned);
++	kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_queued);
++}
++
++/**
++ * HCD Callback function for disconnect of the HCD.
++ *
++ * @param _p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_disconnect_cb( void *_p )
++{
++	gintsts_data_t 	intr;
++	dwc_otg_hcd_t 	*dwc_otg_hcd = hcd_to_dwc_otg_hcd (_p);
++
++	DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p);
++
++	/* 
++	 * Set status flags for the hub driver.
++	 */
++	dwc_otg_hcd->flags.b.port_connect_status_change = 1;
++	dwc_otg_hcd->flags.b.port_connect_status = 0;
++
++	/*
++	 * Shutdown any transfers in process by clearing the Tx FIFO Empty
++	 * interrupt mask and status bits and disabling subsequent host
++	 * channel interrupts.
++	 */
++	intr.d32 = 0;
++	intr.b.nptxfempty = 1;
++	intr.b.ptxfempty = 1;
++	intr.b.hcintr = 1;
++	dwc_modify_reg32 (&dwc_otg_hcd->core_if->core_global_regs->gintmsk, intr.d32, 0);
++	dwc_modify_reg32 (&dwc_otg_hcd->core_if->core_global_regs->gintsts, intr.d32, 0);
++
++	del_timers(dwc_otg_hcd);
++
++	/*
++	 * Turn off the vbus power only if the core has transitioned to device
++	 * mode. If still in host mode, need to keep power on to detect a
++	 * reconnection.
++	 */
++	if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) {
++		if (dwc_otg_hcd->core_if->op_state != A_SUSPEND) {        
++			hprt0_data_t hprt0 = { .d32=0 };
++			DWC_PRINT("Disconnect: PortPower off\n");
++			hprt0.b.prtpwr = 0;
++			dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32);
++		}
++
++		dwc_otg_disable_host_interrupts( dwc_otg_hcd->core_if );
++	}
++
++	/* Respond with an error status to all URBs in the schedule. */
++	kill_all_urbs(dwc_otg_hcd);
++
++	if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) {
++		/* Clean up any host channels that were in use. */
++		int			num_channels;
++		int			i;
++		dwc_hc_t		*channel;
++		dwc_otg_hc_regs_t	*hc_regs;
++		hcchar_data_t		hcchar;
++
++		num_channels = dwc_otg_hcd->core_if->core_params->host_channels;
++
++		if (!dwc_otg_hcd->core_if->dma_enable) {
++			/* Flush out any channel requests in slave mode. */
++			for (i = 0; i < num_channels; i++) {
++				channel = dwc_otg_hcd->hc_ptr_array[i];
++				if (list_empty(&channel->hc_list_entry)) {
++					hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i];
++					hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++					if (hcchar.b.chen) {
++						hcchar.b.chen = 0;
++						hcchar.b.chdis = 1;
++						hcchar.b.epdir = 0;
++						dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++					}
++				}
++			}
++		}
++
++		for (i = 0; i < num_channels; i++) {
++			channel = dwc_otg_hcd->hc_ptr_array[i];
++			if (list_empty(&channel->hc_list_entry)) {
++				hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i];
++				hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++				if (hcchar.b.chen) {
++					/* Halt the channel. */
++					hcchar.b.chdis = 1;
++					dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++				}
++
++				dwc_otg_hc_cleanup(dwc_otg_hcd->core_if, channel);
++				list_add_tail(&channel->hc_list_entry,
++						&dwc_otg_hcd->free_hc_list);
++			}
++		}
++	}
++
++	/* A disconnect will end the session so the B-Device is no
++	 * longer a B-host. */
++	((struct usb_hcd *)_p)->self.is_b_host = 0;
++
++	return 1;
++}
++
++/**
++ * Connection timeout function.  An OTG host is required to display a
++ * message if the device does not connect within 10 seconds.
++ */
++void dwc_otg_hcd_connect_timeout( unsigned long _ptr )
++{
++	DWC_DEBUGPL(DBG_HCDV, "%s(%x)\n", __func__, (int)_ptr);
++	DWC_PRINT( "Connect Timeout\n");
++	DWC_ERROR( "Device Not Connected/Responding\n" );
++}
++
++/**
++ * Start the connection timer.  An OTG host is required to display a
++ * message if the device does not connect within 10 seconds.  The
++ * timer is deleted if a port connect interrupt occurs before the
++ * timer expires.
++ */
++static void dwc_otg_hcd_start_connect_timer( dwc_otg_hcd_t *_hcd)
++{
++	init_timer( &_hcd->conn_timer );
++	_hcd->conn_timer.function = dwc_otg_hcd_connect_timeout;
++	_hcd->conn_timer.data = (unsigned long)0;
++	_hcd->conn_timer.expires = jiffies + (HZ*10);
++	add_timer( &_hcd->conn_timer );
++}
++
++/**
++ * HCD Callback function for disconnect of the HCD.
++ *
++ * @param _p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_session_start_cb( void *_p )
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_p);
++	DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p);
++	dwc_otg_hcd_start_connect_timer( dwc_otg_hcd );
++	return 1;
++}
++
++/**
++ * HCD Callback structure for handling mode switching.
++ */
++static dwc_otg_cil_callbacks_t hcd_cil_callbacks = {
++	.start = dwc_otg_hcd_start_cb,
++	.stop = dwc_otg_hcd_stop_cb,
++	.disconnect = dwc_otg_hcd_disconnect_cb,
++	.session_start = dwc_otg_hcd_session_start_cb,
++	.p = 0,
++};
++
++
++/**
++ * Reset tasklet function
++ */
++static void reset_tasklet_func (unsigned long data)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t*)data;
++	dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
++	hprt0_data_t hprt0;
++
++	DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n");
++
++	hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++	hprt0.b.prtrst = 1;
++	dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++	mdelay (60);
++
++	hprt0.b.prtrst = 0;
++	dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++	dwc_otg_hcd->flags.b.port_reset_change = 1;	
++
++	return;
++}
++
++static struct tasklet_struct reset_tasklet = { 
++	.next = NULL,
++	.state = 0,
++	.count = ATOMIC_INIT(0),
++	.func = reset_tasklet_func,
++	.data = 0,
++};
++
++/**
++ * Initializes the HCD. This function allocates memory for and initializes the
++ * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the
++ * USB bus with the core and calls the hc_driver->start() function. It returns
++ * a negative error on failure.
++ */
++int init_hcd_usecs(dwc_otg_hcd_t *_hcd);
++
++int  __devinit  dwc_otg_hcd_init(struct device *_dev, dwc_otg_device_t * dwc_otg_device)
++{
++	struct usb_hcd *hcd = NULL;
++	dwc_otg_hcd_t *dwc_otg_hcd = NULL;
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++	int 		num_channels;
++	int 		i;
++	dwc_hc_t	*channel;
++
++	int retval = 0;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT\n");
++
++	/*
++	 * Allocate memory for the base HCD plus the DWC OTG HCD.
++	 * Initialize the base HCD.
++	 */
++	hcd = usb_create_hcd(&dwc_otg_hc_driver, _dev, dev_name(_dev));
++	if (hcd == NULL) {
++		retval = -ENOMEM;
++		goto error1;
++	}
++	dev_set_drvdata(_dev, dwc_otg_device); /* fscz restore */
++	hcd->regs = otg_dev->base;
++	hcd->rsrc_start = (int)otg_dev->base;
++
++	hcd->self.otg_port = 1;	 
++
++	/* Initialize the DWC OTG HCD. */
++	dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	dwc_otg_hcd->core_if = otg_dev->core_if;
++	otg_dev->hcd = dwc_otg_hcd;
++
++	/* Register the HCD CIL Callbacks */
++	dwc_otg_cil_register_hcd_callbacks(otg_dev->core_if, 
++			&hcd_cil_callbacks, hcd);
++
++	/* Initialize the non-periodic schedule. */
++	INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_inactive);
++	INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_active);
++	INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_deferred);
++
++	/* Initialize the periodic schedule. */
++	INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_inactive);
++	INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_ready);
++	INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_assigned);
++	INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_queued);
++
++	/*
++	 * Create a host channel descriptor for each host channel implemented
++	 * in the controller. Initialize the channel descriptor array.
++	 */
++	INIT_LIST_HEAD(&dwc_otg_hcd->free_hc_list);
++	num_channels = dwc_otg_hcd->core_if->core_params->host_channels;
++	for (i = 0; i < num_channels; i++) {
++		channel = kmalloc(sizeof(dwc_hc_t), GFP_KERNEL);
++		if (channel == NULL) {
++			retval = -ENOMEM;
++			DWC_ERROR("%s: host channel allocation failed\n", __func__);
++			goto error2;
++		}
++		memset(channel, 0, sizeof(dwc_hc_t));
++		channel->hc_num = i;
++		dwc_otg_hcd->hc_ptr_array[i] = channel;
++#ifdef DEBUG
++		init_timer(&dwc_otg_hcd->core_if->hc_xfer_timer[i]);
++#endif		
++
++		DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i, channel);
++	}
++
++	/* Initialize the Connection timeout timer. */
++	init_timer( &dwc_otg_hcd->conn_timer );
++
++	/* Initialize reset tasklet. */
++	reset_tasklet.data = (unsigned long) dwc_otg_hcd;
++	dwc_otg_hcd->reset_tasklet = &reset_tasklet;
++
++	/* Set device flags indicating whether the HCD supports DMA. */
++	if (otg_dev->core_if->dma_enable) {
++		DWC_PRINT("Using DMA mode\n");
++		//_dev->dma_mask = (void *)~0;
++		//_dev->coherent_dma_mask = ~0;
++		_dev->dma_mask = &dma_mask;
++		_dev->coherent_dma_mask = DMA_BIT_MASK(32);
++	} else {
++		DWC_PRINT("Using Slave mode\n");
++		_dev->dma_mask = (void *)0;
++		_dev->coherent_dma_mask = 0;
++	}
++
++	init_hcd_usecs(dwc_otg_hcd);
++	/*
++	 * Finish generic HCD initialization and start the HCD. This function
++	 * allocates the DMA buffer pool, registers the USB bus, requests the
++	 * IRQ line, and calls dwc_otg_hcd_start method.
++	 */
++	retval = usb_add_hcd(hcd, otg_dev->irq, IRQF_SHARED);
++	if (retval < 0) {
++		goto error2;
++	}
++
++	/*
++	 * Allocate space for storing data on status transactions. Normally no
++	 * data is sent, but this space acts as a bit bucket. This must be
++	 * done after usb_add_hcd since that function allocates the DMA buffer
++	 * pool.
++	 */
++	if (otg_dev->core_if->dma_enable) {
++		dwc_otg_hcd->status_buf =
++			dma_alloc_coherent(_dev,
++					DWC_OTG_HCD_STATUS_BUF_SIZE,
++					&dwc_otg_hcd->status_buf_dma,
++					GFP_KERNEL | GFP_DMA);
++	} else {
++		dwc_otg_hcd->status_buf = kmalloc(DWC_OTG_HCD_STATUS_BUF_SIZE,
++				GFP_KERNEL);
++	}
++	if (dwc_otg_hcd->status_buf == NULL) {
++		retval = -ENOMEM;
++		DWC_ERROR("%s: status_buf allocation failed\n", __func__);
++		goto error3;
++	}
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Initialized HCD, bus=%s, usbbus=%d\n", 
++			dev_name(_dev), hcd->self.busnum);
++
++	return 0;
++
++	/* Error conditions */
++error3:
++	usb_remove_hcd(hcd);
++error2:
++	dwc_otg_hcd_free(hcd);
++	usb_put_hcd(hcd);
++error1:
++	return retval;
++}
++
++/**
++ * Removes the HCD.
++ * Frees memory and resources associated with the HCD and deregisters the bus.
++ */
++void dwc_otg_hcd_remove(struct device *_dev)
++{
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	dwc_otg_hcd_t *dwc_otg_hcd = otg_dev->hcd;
++	struct usb_hcd *hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd);
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE\n");
++
++	/* Turn off all interrupts */
++	dwc_write_reg32 (&dwc_otg_hcd->core_if->core_global_regs->gintmsk, 0);
++	dwc_modify_reg32 (&dwc_otg_hcd->core_if->core_global_regs->gahbcfg, 1, 0);
++
++	usb_remove_hcd(hcd);
++
++	dwc_otg_hcd_free(hcd);
++
++	usb_put_hcd(hcd);
++
++	return;
++}
++
++
++/* =========================================================================
++ *  Linux HC Driver Functions
++ * ========================================================================= */
++
++/**
++ * Initializes dynamic portions of the DWC_otg HCD state.
++ */
++static void hcd_reinit(dwc_otg_hcd_t *_hcd)
++{
++	struct list_head 	*item;
++	int			num_channels;
++	int			i;
++	dwc_hc_t		*channel;
++
++	_hcd->flags.d32 = 0;
++
++	_hcd->non_periodic_qh_ptr = &_hcd->non_periodic_sched_active;
++	_hcd->available_host_channels = _hcd->core_if->core_params->host_channels;
++
++	/*
++	 * Put all channels in the free channel list and clean up channel
++	 * states.
++	 */
++	item = _hcd->free_hc_list.next;
++	while (item != &_hcd->free_hc_list) {
++		list_del(item);
++		item = _hcd->free_hc_list.next;
++	}
++	num_channels = _hcd->core_if->core_params->host_channels;
++	for (i = 0; i < num_channels; i++) {
++		channel = _hcd->hc_ptr_array[i];
++		list_add_tail(&channel->hc_list_entry, &_hcd->free_hc_list);
++		dwc_otg_hc_cleanup(_hcd->core_if, channel);
++	}
++
++	/* Initialize the DWC core for host mode operation. */
++	dwc_otg_core_host_init(_hcd->core_if);
++}
++
++/** Initializes the DWC_otg controller and its root hub and prepares it for host
++ * mode operation. Activates the root port. Returns 0 on success and a negative
++ * error code on failure. */
++int dwc_otg_hcd_start(struct usb_hcd *_hcd)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
++	dwc_otg_core_if_t * core_if = dwc_otg_hcd->core_if;
++	struct usb_bus *bus;
++
++	//      int retval;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n");
++
++	bus = hcd_to_bus(_hcd);
++
++	/* Initialize the bus state.  If the core is in Device Mode
++	 * HALT the USB bus and return. */
++	if (dwc_otg_is_device_mode (core_if)) {
++		_hcd->state = HC_STATE_HALT;
++		return 0;
++	}
++	_hcd->state = HC_STATE_RUNNING;
++
++	/* Initialize and connect root hub if one is not already attached */
++	if (bus->root_hub) {
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hub\n");
++		/* Inform the HUB driver to resume. */
++		usb_hcd_resume_root_hub(_hcd);
++	}
++	else {
++#if 0
++		struct usb_device *udev;
++		udev = usb_alloc_dev(NULL, bus, 0);
++		if (!udev) {
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error udev alloc\n");
++			return -ENODEV;
++		}
++		udev->speed = USB_SPEED_HIGH;
++		/* Not needed - VJ
++		   if ((retval = usb_hcd_register_root_hub(udev, _hcd)) != 0) {
++		   DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error registering %d\n", retval);
++		   return -ENODEV;
++		   }
++		   */
++#else
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error udev alloc\n");
++#endif
++	}
++
++	hcd_reinit(dwc_otg_hcd);
++
++	return 0;
++}
++
++static void qh_list_free(dwc_otg_hcd_t *_hcd, struct list_head *_qh_list)
++{
++	struct list_head 	*item;
++	dwc_otg_qh_t		*qh;
++
++	if (_qh_list->next == NULL) {
++		/* The list hasn't been initialized yet. */
++		return;
++	}
++
++	/* Ensure there are no QTDs or URBs left. */
++	kill_urbs_in_qh_list(_hcd, _qh_list);
++
++	for (item = _qh_list->next; item != _qh_list; item = _qh_list->next) {
++		qh = list_entry(item, dwc_otg_qh_t, qh_list_entry);
++		dwc_otg_hcd_qh_remove_and_free(_hcd, qh);
++	}
++}
++
++/**
++ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
++ * stopped.
++ */
++void dwc_otg_hcd_stop(struct usb_hcd *_hcd)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
++	hprt0_data_t hprt0 = { .d32=0 };
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n");
++
++	/* Turn off all host-specific interrupts. */
++	dwc_otg_disable_host_interrupts( dwc_otg_hcd->core_if );
++
++	/*
++	 * The root hub should be disconnected before this function is called.
++	 * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue)
++	 * and the QH lists (via ..._hcd_endpoint_disable).
++	 */
++
++	/* Turn off the vbus power */
++	DWC_PRINT("PortPower off\n");
++	hprt0.b.prtpwr = 0;
++	dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32);
++
++	return;
++}
++
++
++/** Returns the current frame number. */
++int dwc_otg_hcd_get_frame_number(struct usb_hcd *_hcd)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd);
++	hfnum_data_t hfnum;
++
++	hfnum.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if->
++			host_if->host_global_regs->hfnum);
++
++#ifdef DEBUG_SOF
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMBER %d\n", hfnum.b.frnum);
++#endif	
++	return hfnum.b.frnum;
++}
++
++/**
++ * Frees secondary storage associated with the dwc_otg_hcd structure contained
++ * in the struct usb_hcd field.
++ */
++void dwc_otg_hcd_free(struct usb_hcd *_hcd)
++{
++	dwc_otg_hcd_t 	*dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd);
++	int		i;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n");
++
++	del_timers(dwc_otg_hcd);
++
++	/* Free memory for QH/QTD lists */
++	qh_list_free(dwc_otg_hcd, 	&dwc_otg_hcd->non_periodic_sched_inactive);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_deferred);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_active);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_inactive);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_ready);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_assigned);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_queued);
++
++	/* Free memory for the host channels. */
++	for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++		dwc_hc_t *hc = dwc_otg_hcd->hc_ptr_array[i];
++		if (hc != NULL) {
++			DWC_DEBUGPL(DBG_HCDV, "HCD Free channel #%i, hc=%p\n", i, hc);
++			kfree(hc);
++		}
++	}
++
++	if (dwc_otg_hcd->core_if->dma_enable) {
++		if (dwc_otg_hcd->status_buf_dma) {
++			dma_free_coherent(_hcd->self.controller,
++					DWC_OTG_HCD_STATUS_BUF_SIZE,
++					dwc_otg_hcd->status_buf,
++					dwc_otg_hcd->status_buf_dma);
++		}
++	} else if (dwc_otg_hcd->status_buf != NULL) {
++		kfree(dwc_otg_hcd->status_buf);
++	}
++
++	return;
++}
++
++
++#ifdef DEBUG
++static void dump_urb_info(struct urb *_urb, char* _fn_name)
++{
++	DWC_PRINT("%s, urb %p\n", _fn_name, _urb);
++	DWC_PRINT("  Device address: %d\n", usb_pipedevice(_urb->pipe));
++	DWC_PRINT("  Endpoint: %d, %s\n", usb_pipeendpoint(_urb->pipe),
++			(usb_pipein(_urb->pipe) ? "IN" : "OUT"));
++	DWC_PRINT("  Endpoint type: %s\n",
++			({char *pipetype;
++			 switch (usb_pipetype(_urb->pipe)) {
++			 case PIPE_CONTROL: pipetype = "CONTROL"; break;
++			 case PIPE_BULK: pipetype = "BULK"; break;
++			 case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break;
++			 case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break;
++			 default: pipetype = "UNKNOWN"; break;
++			 }; pipetype;}));
++	DWC_PRINT("  Speed: %s\n",
++			({char *speed;
++			 switch (_urb->dev->speed) {
++			 case USB_SPEED_HIGH: speed = "HIGH"; break;
++			 case USB_SPEED_FULL: speed = "FULL"; break;
++			 case USB_SPEED_LOW: speed = "LOW"; break;
++			 default: speed = "UNKNOWN"; break;
++			 }; speed;}));
++	DWC_PRINT("  Max packet size: %d\n",
++			usb_maxpacket(_urb->dev, _urb->pipe, usb_pipeout(_urb->pipe)));
++	DWC_PRINT("  Data buffer length: %d\n", _urb->transfer_buffer_length);
++	DWC_PRINT("  Transfer buffer: %p, Transfer DMA: %p\n",
++			_urb->transfer_buffer, (void *)_urb->transfer_dma);
++	DWC_PRINT("  Setup buffer: %p, Setup DMA: %p\n",
++			_urb->setup_packet, (void *)_urb->setup_dma);
++	DWC_PRINT("  Interval: %d\n", _urb->interval);
++	if (usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS) {
++		int i;
++		for (i = 0; i < _urb->number_of_packets;  i++) {
++			DWC_PRINT("  ISO Desc %d:\n", i);
++			DWC_PRINT("    offset: %d, length %d\n",
++					_urb->iso_frame_desc[i].offset,
++					_urb->iso_frame_desc[i].length);
++		}
++	}
++}
++
++static void dump_channel_info(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *qh)
++{
++	if (qh->channel != NULL) {
++		dwc_hc_t *hc = qh->channel;
++		struct list_head *item;
++		dwc_otg_qh_t *qh_item;
++		int num_channels = _hcd->core_if->core_params->host_channels;
++		int i;
++
++		dwc_otg_hc_regs_t *hc_regs;
++		hcchar_data_t 	hcchar;
++		hcsplt_data_t	hcsplt;
++		hctsiz_data_t 	hctsiz;
++		uint32_t	hcdma;
++
++		hc_regs = _hcd->core_if->host_if->hc_regs[hc->hc_num];
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt);
++		hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
++		hcdma = dwc_read_reg32(&hc_regs->hcdma);
++
++		DWC_PRINT("  Assigned to channel %p:\n", hc);
++		DWC_PRINT("    hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
++		DWC_PRINT("    hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
++		DWC_PRINT("    dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
++				hc->dev_addr, hc->ep_num, hc->ep_is_in);
++		DWC_PRINT("    ep_type: %d\n", hc->ep_type);
++		DWC_PRINT("    max_packet: %d\n", hc->max_packet);
++		DWC_PRINT("    data_pid_start: %d\n", hc->data_pid_start);
++		DWC_PRINT("    xfer_started: %d\n", hc->xfer_started);
++		DWC_PRINT("    halt_status: %d\n", hc->halt_status);
++		DWC_PRINT("    xfer_buff: %p\n", hc->xfer_buff);
++		DWC_PRINT("    xfer_len: %d\n", hc->xfer_len);
++		DWC_PRINT("    qh: %p\n", hc->qh);
++		DWC_PRINT("  NP inactive sched:\n");
++		list_for_each(item, &_hcd->non_periodic_sched_inactive) {
++			qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
++			DWC_PRINT("    %p\n", qh_item);
++		} DWC_PRINT("  NP active sched:\n");
++		list_for_each(item, &_hcd->non_periodic_sched_deferred) {
++			qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
++			DWC_PRINT("    %p\n", qh_item);
++		} DWC_PRINT("  NP deferred sched:\n");
++		list_for_each(item, &_hcd->non_periodic_sched_active) {
++			qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
++			DWC_PRINT("    %p\n", qh_item);
++		} DWC_PRINT("  Channels: \n");
++		for (i = 0; i < num_channels; i++) {
++			dwc_hc_t *hc = _hcd->hc_ptr_array[i];
++			DWC_PRINT("    %2d: %p\n", i, hc);
++		}
++	}
++}
++#endif // DEBUG
++
++/** Starts processing a USB transfer request specified by a USB Request Block
++ * (URB). mem_flags indicates the type of memory allocation to use while
++ * processing this URB. */
++int dwc_otg_hcd_urb_enqueue(struct usb_hcd *_hcd, 
++		struct urb *_urb, 
++		gfp_t _mem_flags)
++{
++	unsigned long flags;
++	int retval;
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
++	dwc_otg_qtd_t *qtd;
++
++	local_irq_save(flags);
++	retval = usb_hcd_link_urb_to_ep(_hcd, _urb);
++	if (retval) {
++		local_irq_restore(flags);
++		return retval;
++	}
++#ifdef DEBUG
++	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++		dump_urb_info(_urb, "dwc_otg_hcd_urb_enqueue");
++	}
++#endif // DEBUG
++	if (!dwc_otg_hcd->flags.b.port_connect_status) {
++		/* No longer connected. */
++		local_irq_restore(flags);
++		return -ENODEV;
++	}
++
++	qtd = dwc_otg_hcd_qtd_create (_urb);
++	if (qtd == NULL) {
++		local_irq_restore(flags);
++		DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n");
++		return -ENOMEM;
++	}
++
++	retval = dwc_otg_hcd_qtd_add (qtd, dwc_otg_hcd);
++	if (retval < 0) {
++		DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. "
++				"Error status %d\n", retval);
++		dwc_otg_hcd_qtd_free(qtd);
++	}
++
++	local_irq_restore (flags);
++	return retval;
++}
++
++/** Aborts/cancels a USB transfer request. Always returns 0 to indicate
++ * success.  */
++int dwc_otg_hcd_urb_dequeue(struct usb_hcd *_hcd, struct urb *_urb, int _status)
++{
++	unsigned long flags;
++	dwc_otg_hcd_t *dwc_otg_hcd;
++	dwc_otg_qtd_t *urb_qtd;
++	dwc_otg_qh_t *qh;
++	int retval;
++	//struct usb_host_endpoint *_ep = NULL;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n");
++
++	local_irq_save(flags);
++
++	retval = usb_hcd_check_unlink_urb(_hcd, _urb, _status);
++	if (retval) {
++		local_irq_restore(flags);
++		return retval;
++	}
++
++	dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd);
++	urb_qtd = (dwc_otg_qtd_t *)_urb->hcpriv;
++	if (urb_qtd == NULL) {
++		printk("urb_qtd is NULL for _urb %08x\n",(unsigned)_urb);
++		goto done;
++	}
++	qh = (dwc_otg_qh_t *) urb_qtd->qtd_qh_ptr;
++	if (qh == NULL) {
++		goto done;
++	}
++
++#ifdef DEBUG
++	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++		dump_urb_info(_urb, "dwc_otg_hcd_urb_dequeue");
++		if (urb_qtd == qh->qtd_in_process) {
++			dump_channel_info(dwc_otg_hcd, qh);
++		}
++	}
++#endif // DEBUG
++
++	if (urb_qtd == qh->qtd_in_process) {
++		/* The QTD is in process (it has been assigned to a channel). */
++
++		if (dwc_otg_hcd->flags.b.port_connect_status) {
++			/*
++			 * If still connected (i.e. in host mode), halt the
++			 * channel so it can be used for other transfers. If
++			 * no longer connected, the host registers can't be
++			 * written to halt the channel since the core is in
++			 * device mode.
++			 */
++			dwc_otg_hc_halt(dwc_otg_hcd->core_if, qh->channel,
++					DWC_OTG_HC_XFER_URB_DEQUEUE);
++		}
++	}
++
++	/*
++	 * Free the QTD and clean up the associated QH. Leave the QH in the
++	 * schedule if it has any remaining QTDs.
++	 */
++	dwc_otg_hcd_qtd_remove_and_free(urb_qtd);
++	if (urb_qtd == qh->qtd_in_process) {
++		dwc_otg_hcd_qh_deactivate(dwc_otg_hcd, qh, 0);
++		qh->channel = NULL;
++		qh->qtd_in_process = NULL;
++	} else if (list_empty(&qh->qtd_list)) {
++		dwc_otg_hcd_qh_remove(dwc_otg_hcd, qh);
++	}
++
++done:
++	local_irq_restore(flags);
++	_urb->hcpriv = NULL;
++
++	/* Higher layer software sets URB status. */
++	usb_hcd_unlink_urb_from_ep(_hcd, _urb);
++	usb_hcd_giveback_urb(_hcd, _urb, _status);
++	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++		DWC_PRINT("Called usb_hcd_giveback_urb()\n");
++		DWC_PRINT("  urb->status = %d\n", _urb->status);
++	}
++
++	return 0;
++}
++
++
++/** Frees resources in the DWC_otg controller related to a given endpoint. Also
++ * clears state in the HCD related to the endpoint. Any URBs for the endpoint
++ * must already be dequeued. */
++void dwc_otg_hcd_endpoint_disable(struct usb_hcd *_hcd,
++		struct usb_host_endpoint *_ep)
++
++{
++	dwc_otg_qh_t *qh;
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd);
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP DISABLE: _bEndpointAddress=0x%02x, "
++			"endpoint=%d\n", _ep->desc.bEndpointAddress,
++			dwc_ep_addr_to_endpoint(_ep->desc.bEndpointAddress));
++
++	qh = (dwc_otg_qh_t *)(_ep->hcpriv);
++	if (qh != NULL) {
++#ifdef DEBUG
++		/** Check that the QTD list is really empty */
++		if (!list_empty(&qh->qtd_list)) {
++			DWC_WARN("DWC OTG HCD EP DISABLE:"
++					" QTD List for this endpoint is not empty\n");
++		}
++#endif // DEBUG
++
++		dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd, qh);
++		_ep->hcpriv = NULL;
++	}
++
++	return;
++}
++extern int dwc_irq;
++/** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if
++ * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid
++ * interrupt.
++ *
++ * This function is called by the USB core when an interrupt occurs */
++irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *_hcd)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
++
++	mask_and_ack_ifx_irq (dwc_irq);
++	return IRQ_RETVAL(dwc_otg_hcd_handle_intr(dwc_otg_hcd));
++}
++
++/** Creates Status Change bitmap for the root hub and root port. The bitmap is
++ * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1
++ * is the status change indicator for the single root port. Returns 1 if either
++ * change indicator is 1, otherwise returns 0. */
++int dwc_otg_hcd_hub_status_data(struct usb_hcd *_hcd, char *_buf)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
++
++	_buf[0] = 0;
++	_buf[0] |= (dwc_otg_hcd->flags.b.port_connect_status_change ||
++			dwc_otg_hcd->flags.b.port_reset_change ||
++			dwc_otg_hcd->flags.b.port_enable_change ||
++			dwc_otg_hcd->flags.b.port_suspend_change ||
++			dwc_otg_hcd->flags.b.port_over_current_change) << 1;
++
++#ifdef DEBUG
++	if (_buf[0]) {
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:"
++				" Root port status changed\n");
++		DWC_DEBUGPL(DBG_HCDV, "  port_connect_status_change: %d\n",
++				dwc_otg_hcd->flags.b.port_connect_status_change);
++		DWC_DEBUGPL(DBG_HCDV, "  port_reset_change: %d\n",
++				dwc_otg_hcd->flags.b.port_reset_change);
++		DWC_DEBUGPL(DBG_HCDV, "  port_enable_change: %d\n",
++				dwc_otg_hcd->flags.b.port_enable_change);
++		DWC_DEBUGPL(DBG_HCDV, "  port_suspend_change: %d\n",
++				dwc_otg_hcd->flags.b.port_suspend_change);
++		DWC_DEBUGPL(DBG_HCDV, "  port_over_current_change: %d\n",
++				dwc_otg_hcd->flags.b.port_over_current_change);
++	}
++#endif // DEBUG
++	return (_buf[0] != 0);
++}
++
++#ifdef DWC_HS_ELECT_TST
++/*
++ * Quick and dirty hack to implement the HS Electrical Test
++ * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature.
++ *
++ * This code was copied from our userspace app "hset". It sends a
++ * Get Device Descriptor control sequence in two parts, first the
++ * Setup packet by itself, followed some time later by the In and
++ * Ack packets. Rather than trying to figure out how to add this
++ * functionality to the normal driver code, we just hijack the
++ * hardware, using these two function to drive the hardware
++ * directly.
++ */
++
++dwc_otg_core_global_regs_t *global_regs;
++dwc_otg_host_global_regs_t *hc_global_regs;
++dwc_otg_hc_regs_t *hc_regs;
++uint32_t *data_fifo;
++
++static void do_setup(void)
++{
++	gintsts_data_t gintsts;
++	hctsiz_data_t hctsiz;
++	hcchar_data_t hcchar;
++	haint_data_t haint;
++	hcint_data_t hcint;
++
++	/* Enable HAINTs */
++	dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001);
++
++	/* Enable HCINTs */
++	dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++	/* Read HAINT */
++	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++	/* Read HCINT */
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++	/* Read HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++	/* Clear HCINT */
++	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++	/*
++	 * Send Setup packet (Get Device Descriptor)
++	 */
++
++	/* Make sure channel is disabled */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	if (hcchar.b.chen) {
++		//fprintf(stderr, "Channel already enabled 1, HCCHAR = %08x\n", hcchar.d32);
++		hcchar.b.chdis = 1;
++		//		hcchar.b.chen = 1;
++		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++		//sleep(1);
++		MDELAY(1000);
++
++		/* Read GINTSTS */
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++		//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++		/* Read HAINT */
++		haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++		//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++		/* Read HCINT */
++		hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++		//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++		/* Read HCCHAR */
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++		/* Clear HCINT */
++		dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++		/* Clear HAINT */
++		dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++		/* Clear GINTSTS */
++		dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		//if (hcchar.b.chen) {
++		//	fprintf(stderr, "** Channel _still_ enabled 1, HCCHAR = %08x **\n", hcchar.d32);
++		//}
++	}
++
++	/* Set HCTSIZ */
++	hctsiz.d32 = 0;
++	hctsiz.b.xfersize = 8;
++	hctsiz.b.pktcnt = 1;
++	hctsiz.b.pid = DWC_OTG_HC_PID_SETUP;
++	dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++	/* Set HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++	hcchar.b.epdir = 0;
++	hcchar.b.epnum = 0;
++	hcchar.b.mps = 8;
++	hcchar.b.chen = 1;
++	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++	/* Fill FIFO with Setup data for Get Device Descriptor */
++	data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
++	dwc_write_reg32(data_fifo++, 0x01000680);
++	dwc_write_reg32(data_fifo++, 0x00080000);
++
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "Waiting for HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Wait for host channel interrupt */
++	do {
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	} while (gintsts.b.hcintr == 0);
++
++	//fprintf(stderr, "Got HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Disable HCINTs */
++	dwc_write_reg32(&hc_regs->hcintmsk, 0x0000);
++
++	/* Disable HAINTs */
++	dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000);
++
++	/* Read HAINT */
++	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++	/* Read HCINT */
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++	/* Read HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++	/* Clear HCINT */
++	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++}
++
++static void do_in_ack(void)
++{
++	gintsts_data_t gintsts;
++	hctsiz_data_t hctsiz;
++	hcchar_data_t hcchar;
++	haint_data_t haint;
++	hcint_data_t hcint;
++	host_grxsts_data_t grxsts;
++
++	/* Enable HAINTs */
++	dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001);
++
++	/* Enable HCINTs */
++	dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++	/* Read HAINT */
++	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++	/* Read HCINT */
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++	/* Read HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++	/* Clear HCINT */
++	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++	/*
++	 * Receive Control In packet
++	 */
++
++	/* Make sure channel is disabled */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	if (hcchar.b.chen) {
++		//fprintf(stderr, "Channel already enabled 2, HCCHAR = %08x\n", hcchar.d32);
++		hcchar.b.chdis = 1;
++		hcchar.b.chen = 1;
++		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++		//sleep(1);
++		MDELAY(1000);
++
++		/* Read GINTSTS */
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++		//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++		/* Read HAINT */
++		haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++		//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++		/* Read HCINT */
++		hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++		//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++		/* Read HCCHAR */
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++		/* Clear HCINT */
++		dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++		/* Clear HAINT */
++		dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++		/* Clear GINTSTS */
++		dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		//if (hcchar.b.chen) {
++		//	fprintf(stderr, "** Channel _still_ enabled 2, HCCHAR = %08x **\n", hcchar.d32);
++		//}
++	}
++
++	/* Set HCTSIZ */
++	hctsiz.d32 = 0;
++	hctsiz.b.xfersize = 8;
++	hctsiz.b.pktcnt = 1;
++	hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
++	dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++	/* Set HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++	hcchar.b.epdir = 1;
++	hcchar.b.epnum = 0;
++	hcchar.b.mps = 8;
++	hcchar.b.chen = 1;
++	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "Waiting for RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Wait for receive status queue interrupt */
++	do {
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	} while (gintsts.b.rxstsqlvl == 0);
++
++	//fprintf(stderr, "Got RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Read RXSTS */
++	grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp);
++	//fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
++
++	/* Clear RXSTSQLVL in GINTSTS */
++	gintsts.d32 = 0;
++	gintsts.b.rxstsqlvl = 1;
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	switch (grxsts.b.pktsts) {
++		case DWC_GRXSTS_PKTSTS_IN:
++			/* Read the data into the host buffer */
++			if (grxsts.b.bcnt > 0) {
++				int i;
++				int word_count = (grxsts.b.bcnt + 3) / 4;
++
++				data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
++
++				for (i = 0; i < word_count; i++) {
++					(void)dwc_read_reg32(data_fifo++);
++				}
++			}
++
++			//fprintf(stderr, "Received %u bytes\n", (unsigned)grxsts.b.bcnt);
++			break;
++
++		default:
++			//fprintf(stderr, "** Unexpected GRXSTS packet status 1 **\n");
++			break;
++	}
++
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "Waiting for RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Wait for receive status queue interrupt */
++	do {
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	} while (gintsts.b.rxstsqlvl == 0);
++
++	//fprintf(stderr, "Got RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Read RXSTS */
++	grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp);
++	//fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
++
++	/* Clear RXSTSQLVL in GINTSTS */
++	gintsts.d32 = 0;
++	gintsts.b.rxstsqlvl = 1;
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	switch (grxsts.b.pktsts) {
++		case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
++			break;
++
++		default:
++			//fprintf(stderr, "** Unexpected GRXSTS packet status 2 **\n");
++			break;
++	}
++
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "Waiting for HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Wait for host channel interrupt */
++	do {
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	} while (gintsts.b.hcintr == 0);
++
++	//fprintf(stderr, "Got HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Read HAINT */
++	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++	/* Read HCINT */
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++	/* Read HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++	/* Clear HCINT */
++	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++	//	usleep(100000);
++	//	mdelay(100);
++	MDELAY(1);
++
++	/*
++	 * Send handshake packet
++	 */
++
++	/* Read HAINT */
++	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++	/* Read HCINT */
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++	/* Read HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++	/* Clear HCINT */
++	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++	/* Make sure channel is disabled */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	if (hcchar.b.chen) {
++		//fprintf(stderr, "Channel already enabled 3, HCCHAR = %08x\n", hcchar.d32);
++		hcchar.b.chdis = 1;
++		hcchar.b.chen = 1;
++		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++		//sleep(1);
++		MDELAY(1000);
++
++		/* Read GINTSTS */
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++		//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++		/* Read HAINT */
++		haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++		//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++		/* Read HCINT */
++		hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++		//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++		/* Read HCCHAR */
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++		/* Clear HCINT */
++		dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++		/* Clear HAINT */
++		dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++		/* Clear GINTSTS */
++		dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		//if (hcchar.b.chen) {
++		//	fprintf(stderr, "** Channel _still_ enabled 3, HCCHAR = %08x **\n", hcchar.d32);
++		//}
++	}
++
++	/* Set HCTSIZ */
++	hctsiz.d32 = 0;
++	hctsiz.b.xfersize = 0;
++	hctsiz.b.pktcnt = 1;
++	hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
++	dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++	/* Set HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++	hcchar.b.epdir = 0;
++	hcchar.b.epnum = 0;
++	hcchar.b.mps = 8;
++	hcchar.b.chen = 1;
++	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "Waiting for HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Wait for host channel interrupt */
++	do {
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	} while (gintsts.b.hcintr == 0);
++
++	//fprintf(stderr, "Got HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Disable HCINTs */
++	dwc_write_reg32(&hc_regs->hcintmsk, 0x0000);
++
++	/* Disable HAINTs */
++	dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000);
++
++	/* Read HAINT */
++	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++	/* Read HCINT */
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++	/* Read HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++	/* Clear HCINT */
++	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++}
++#endif /* DWC_HS_ELECT_TST */
++
++/** Handles hub class-specific requests.*/
++int dwc_otg_hcd_hub_control(struct usb_hcd *_hcd, 
++		u16 _typeReq, 
++		u16 _wValue, 
++		u16 _wIndex, 
++		char *_buf, 
++		u16 _wLength)
++{
++	int retval = 0;
++
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
++	dwc_otg_core_if_t *core_if = hcd_to_dwc_otg_hcd (_hcd)->core_if;
++	struct usb_hub_descriptor *desc;
++	hprt0_data_t hprt0 = {.d32 = 0};
++
++	uint32_t port_status;
++
++	switch (_typeReq) {
++		case ClearHubFeature:
++			DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++					"ClearHubFeature 0x%x\n", _wValue);
++			switch (_wValue) {
++				case C_HUB_LOCAL_POWER:
++				case C_HUB_OVER_CURRENT:
++					/* Nothing required here */
++					break;
++				default:
++					retval = -EINVAL;
++					DWC_ERROR ("DWC OTG HCD - "
++							"ClearHubFeature request %xh unknown\n", _wValue);
++			}
++			break;
++		case ClearPortFeature:
++			if (!_wIndex || _wIndex > 1)
++				goto error;
++
++			switch (_wValue) {
++				case USB_PORT_FEAT_ENABLE:
++					DWC_DEBUGPL (DBG_ANY, "DWC OTG HCD HUB CONTROL - "
++							"ClearPortFeature USB_PORT_FEAT_ENABLE\n");
++					hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++					hprt0.b.prtena = 1;
++					dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++					break;
++				case USB_PORT_FEAT_SUSPEND:
++					DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++							"ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
++					hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++					hprt0.b.prtres = 1;
++					dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++					/* Clear Resume bit */
++					mdelay (100);
++					hprt0.b.prtres = 0;
++					dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++					break;
++				case USB_PORT_FEAT_POWER:
++					DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++							"ClearPortFeature USB_PORT_FEAT_POWER\n");
++					hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++					hprt0.b.prtpwr = 0;
++					dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++					break;
++				case USB_PORT_FEAT_INDICATOR:
++					DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++							"ClearPortFeature USB_PORT_FEAT_INDICATOR\n");
++					/* Port inidicator not supported */
++					break;
++				case USB_PORT_FEAT_C_CONNECTION:
++					/* Clears drivers internal connect status change
++					 * flag */
++					DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++							"ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n");
++					dwc_otg_hcd->flags.b.port_connect_status_change = 0;
++					break;
++				case USB_PORT_FEAT_C_RESET:
++					/* Clears the driver's internal Port Reset Change
++					 * flag */
++					DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++							"ClearPortFeature USB_PORT_FEAT_C_RESET\n");
++					dwc_otg_hcd->flags.b.port_reset_change = 0;
++					break;
++				case USB_PORT_FEAT_C_ENABLE:
++					/* Clears the driver's internal Port
++					 * Enable/Disable Change flag */
++					DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++							"ClearPortFeature USB_PORT_FEAT_C_ENABLE\n");
++					dwc_otg_hcd->flags.b.port_enable_change = 0;
++					break;
++				case USB_PORT_FEAT_C_SUSPEND:
++					/* Clears the driver's internal Port Suspend
++					 * Change flag, which is set when resume signaling on
++					 * the host port is complete */
++					DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++							"ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n");
++					dwc_otg_hcd->flags.b.port_suspend_change = 0;
++					break;
++				case USB_PORT_FEAT_C_OVER_CURRENT:
++					DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++							"ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n");
++					dwc_otg_hcd->flags.b.port_over_current_change = 0;
++					break;
++				default:
++					retval = -EINVAL;
++					DWC_ERROR ("DWC OTG HCD - "
++							"ClearPortFeature request %xh "
++							"unknown or unsupported\n", _wValue);
++			}
++			break;
++		case GetHubDescriptor:
++			DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++					"GetHubDescriptor\n");
++			desc = (struct usb_hub_descriptor *)_buf;
++			desc->bDescLength = 9;
++			desc->bDescriptorType = 0x29;
++			desc->bNbrPorts = 1;
++			desc->wHubCharacteristics = 0x08;
++			desc->bPwrOn2PwrGood = 1;
++			desc->bHubContrCurrent = 0;
++			desc->u.hs.DeviceRemovable[0] = 0;
++			desc->u.hs.DeviceRemovable[1] = 0xff;
++			break;
++		case GetHubStatus:
++			DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++					"GetHubStatus\n");
++			memset (_buf, 0, 4);
++			break;
++		case GetPortStatus:
++			DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++					"GetPortStatus\n");
++
++			if (!_wIndex || _wIndex > 1)
++				goto error;
++
++			port_status = 0;
++
++			if (dwc_otg_hcd->flags.b.port_connect_status_change)
++				port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
++
++			if (dwc_otg_hcd->flags.b.port_enable_change)
++				port_status |= (1 << USB_PORT_FEAT_C_ENABLE);
++
++			if (dwc_otg_hcd->flags.b.port_suspend_change)
++				port_status |= (1 << USB_PORT_FEAT_C_SUSPEND);
++
++			if (dwc_otg_hcd->flags.b.port_reset_change)
++				port_status |= (1 << USB_PORT_FEAT_C_RESET);
++
++			if (dwc_otg_hcd->flags.b.port_over_current_change) {
++				DWC_ERROR("Device Not Supported\n");
++				port_status |= (1 << USB_PORT_FEAT_C_OVER_CURRENT);
++			}
++
++			if (!dwc_otg_hcd->flags.b.port_connect_status) {
++				printk("DISCONNECTED PORT\n");
++				/*
++				 * The port is disconnected, which means the core is
++				 * either in device mode or it soon will be. Just
++				 * return 0's for the remainder of the port status
++				 * since the port register can't be read if the core
++				 * is in device mode.
++				 */
++#if 1 // winder.
++				*((u32 *) _buf) = cpu_to_le32(port_status);
++#else
++				*((__le32 *) _buf) = cpu_to_le32(port_status);
++#endif
++				break;
++			}
++
++			hprt0.d32 = dwc_read_reg32(core_if->host_if->hprt0);
++			DWC_DEBUGPL(DBG_HCDV, "  HPRT0: 0x%08x\n", hprt0.d32);
++
++			if (hprt0.b.prtconnsts) 
++				port_status |= (1 << USB_PORT_FEAT_CONNECTION);
++
++			if (hprt0.b.prtena)
++				port_status |= (1 << USB_PORT_FEAT_ENABLE);
++
++			if (hprt0.b.prtsusp)
++				port_status |= (1 << USB_PORT_FEAT_SUSPEND);
++
++			if (hprt0.b.prtovrcurract)
++				port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT);
++
++			if (hprt0.b.prtrst)
++				port_status |= (1 << USB_PORT_FEAT_RESET);
++
++			if (hprt0.b.prtpwr)
++				port_status |= (1 << USB_PORT_FEAT_POWER);
++
++			if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED)
++				port_status |= USB_PORT_STAT_HIGH_SPEED;
++
++			else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED)
++				port_status |= (1 << USB_PORT_FEAT_LOWSPEED);
++
++			if (hprt0.b.prttstctl)
++				port_status |= (1 << USB_PORT_FEAT_TEST);
++
++			/* USB_PORT_FEAT_INDICATOR unsupported always 0 */
++#if 1 // winder.
++			*((u32 *) _buf) = cpu_to_le32(port_status);
++#else
++			*((__le32 *) _buf) = cpu_to_le32(port_status);
++#endif
++
++			break;
++		case SetHubFeature:
++			DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++					"SetHubFeature\n");
++			/* No HUB features supported */
++			break;
++		case SetPortFeature:
++			if (_wValue != USB_PORT_FEAT_TEST && (!_wIndex || _wIndex > 1))
++				goto error;
++
++			if (!dwc_otg_hcd->flags.b.port_connect_status) {
++				/*
++				 * The port is disconnected, which means the core is
++				 * either in device mode or it soon will be. Just
++				 * return without doing anything since the port
++				 * register can't be written if the core is in device
++				 * mode.
++				 */
++				break;
++			}
++
++			switch (_wValue) {
++				case USB_PORT_FEAT_SUSPEND:
++					DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++							"SetPortFeature - USB_PORT_FEAT_SUSPEND\n");
++					if (_hcd->self.otg_port == _wIndex
++							&& _hcd->self.b_hnp_enable) {
++						gotgctl_data_t  gotgctl = {.d32=0};
++						gotgctl.b.hstsethnpen = 1;
++						dwc_modify_reg32(&core_if->core_global_regs->
++								gotgctl, 0, gotgctl.d32);
++						core_if->op_state = A_SUSPEND;
++					}
++					hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++					hprt0.b.prtsusp = 1;
++					dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++					//DWC_PRINT( "SUSPEND: HPRT0=%0x\n", hprt0.d32);       
++					/* Suspend the Phy Clock */
++					{
++						pcgcctl_data_t pcgcctl = {.d32=0};
++						pcgcctl.b.stoppclk = 1;
++						dwc_write_reg32(core_if->pcgcctl, pcgcctl.d32);
++					}
++
++					/* For HNP the bus must be suspended for at least 200ms.*/
++					if (_hcd->self.b_hnp_enable) {
++						mdelay(200);
++						//DWC_PRINT( "SUSPEND: wait complete! (%d)\n", _hcd->state);
++					}
++					break;
++				case USB_PORT_FEAT_POWER:
++					DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++							"SetPortFeature - USB_PORT_FEAT_POWER\n");
++					hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++					hprt0.b.prtpwr = 1;
++					dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++					break;
++				case USB_PORT_FEAT_RESET:
++					DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++							"SetPortFeature - USB_PORT_FEAT_RESET\n");
++					hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++					/* TODO: Is this for OTG protocol??
++					 *       We shoudl remove OTG totally for Danube system.
++					 *       But, in the future, maybe we need this.
++					 */
++#if 1 // winder 
++					hprt0.b.prtrst = 1;
++					dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++#else
++					/* When B-Host the Port reset bit is set in
++					 * the Start HCD Callback function, so that
++					 * the reset is started within 1ms of the HNP
++					 * success interrupt. */
++					if (!_hcd->self.is_b_host) {
++						hprt0.b.prtrst = 1;
++						dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++					}
++#endif
++					/* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */
++					MDELAY (60);
++					hprt0.b.prtrst = 0;
++					dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++					break;
++
++#ifdef DWC_HS_ELECT_TST
++				case USB_PORT_FEAT_TEST:
++					{
++						uint32_t t;
++						gintmsk_data_t gintmsk;
++
++						t = (_wIndex >> 8); /* MSB wIndex USB */
++						DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++								"SetPortFeature - USB_PORT_FEAT_TEST %d\n", t);
++						printk("USB_PORT_FEAT_TEST %d\n", t);
++						if (t < 6) {
++							hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++							hprt0.b.prttstctl = t;
++							dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++						} else {
++							/* Setup global vars with reg addresses (quick and
++							 * dirty hack, should be cleaned up)
++							 */
++							global_regs = core_if->core_global_regs;
++							hc_global_regs = core_if->host_if->host_global_regs;
++							hc_regs = (dwc_otg_hc_regs_t *)((char *)global_regs + 0x500);
++							data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
++
++							if (t == 6) { /* HS_HOST_PORT_SUSPEND_RESUME */
++								/* Save current interrupt mask */
++								gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
++
++								/* Disable all interrupts while we muck with
++								 * the hardware directly
++								 */
++								dwc_write_reg32(&global_regs->gintmsk, 0);
++
++								/* 15 second delay per the test spec */
++								mdelay(15000);
++
++								/* Drive suspend on the root port */
++								hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++								hprt0.b.prtsusp = 1;
++								hprt0.b.prtres = 0;
++								dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++
++								/* 15 second delay per the test spec */
++								mdelay(15000);
++
++								/* Drive resume on the root port */
++								hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++								hprt0.b.prtsusp = 0;
++								hprt0.b.prtres = 1;
++								dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++								mdelay(100);
++
++								/* Clear the resume bit */
++								hprt0.b.prtres = 0;
++								dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++
++								/* Restore interrupts */
++								dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
++							} else if (t == 7) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */
++								/* Save current interrupt mask */
++								gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
++
++								/* Disable all interrupts while we muck with
++								 * the hardware directly
++								 */
++								dwc_write_reg32(&global_regs->gintmsk, 0);
++
++								/* 15 second delay per the test spec */
++								mdelay(15000);
++
++								/* Send the Setup packet */
++								do_setup();
++
++								/* 15 second delay so nothing else happens for awhile */
++								mdelay(15000);
++
++								/* Restore interrupts */
++								dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
++							} else if (t == 8) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */
++								/* Save current interrupt mask */
++								gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
++
++								/* Disable all interrupts while we muck with
++								 * the hardware directly
++								 */
++								dwc_write_reg32(&global_regs->gintmsk, 0);
++
++								/* Send the Setup packet */
++								do_setup();
++
++								/* 15 second delay so nothing else happens for awhile */
++								mdelay(15000);
++
++								/* Send the In and Ack packets */
++								do_in_ack();
++
++								/* 15 second delay so nothing else happens for awhile */
++								mdelay(15000);
++
++								/* Restore interrupts */
++								dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
++							}
++						}
++						break;
++					}
++#endif /* DWC_HS_ELECT_TST */
++
++				case USB_PORT_FEAT_INDICATOR:
++					DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++							"SetPortFeature - USB_PORT_FEAT_INDICATOR\n");
++					/* Not supported */
++					break;
++				default:
++					retval = -EINVAL;
++					DWC_ERROR ("DWC OTG HCD - "
++							"SetPortFeature request %xh "
++							"unknown or unsupported\n", _wValue);
++					break;
++			}
++			break;
++		default:
++error:
++			retval = -EINVAL;
++			DWC_WARN ("DWC OTG HCD - "
++					"Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n", 
++					_typeReq, _wIndex, _wValue);
++			break;
++	}
++
++	return retval;
++}
++
++
++/**
++ * Assigns transactions from a QTD to a free host channel and initializes the
++ * host channel to perform the transactions. The host channel is removed from
++ * the free list.
++ *
++ * @param _hcd The HCD state structure.
++ * @param _qh Transactions from the first QTD for this QH are selected and
++ * assigned to a free host channel.
++ */
++static void assign_and_init_hc(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
++{
++	dwc_hc_t	*hc;
++	dwc_otg_qtd_t	*qtd;
++	struct urb	*urb;
++
++	DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p)\n", __func__, _hcd, _qh);
++
++	hc = list_entry(_hcd->free_hc_list.next, dwc_hc_t, hc_list_entry);
++
++	/* Remove the host channel from the free list. */
++	list_del_init(&hc->hc_list_entry);
++
++	qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
++	urb = qtd->urb;
++	_qh->channel = hc;
++	_qh->qtd_in_process = qtd;
++
++	/*
++	 * Use usb_pipedevice to determine device address. This address is
++	 * 0 before the SET_ADDRESS command and the correct address afterward.
++	 */
++	hc->dev_addr = usb_pipedevice(urb->pipe);
++	hc->ep_num = usb_pipeendpoint(urb->pipe);
++
++	if (urb->dev->speed == USB_SPEED_LOW) {
++		hc->speed = DWC_OTG_EP_SPEED_LOW;
++	} else if (urb->dev->speed == USB_SPEED_FULL) {
++		hc->speed = DWC_OTG_EP_SPEED_FULL;
++	} else {
++		hc->speed = DWC_OTG_EP_SPEED_HIGH;
++	}
++	hc->max_packet = dwc_max_packet(_qh->maxp);
++
++	hc->xfer_started = 0;
++	hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS;
++	hc->error_state = (qtd->error_count > 0);
++	hc->halt_on_queue = 0;
++	hc->halt_pending = 0;
++	hc->requests = 0;
++
++	/*
++	 * The following values may be modified in the transfer type section
++	 * below. The xfer_len value may be reduced when the transfer is
++	 * started to accommodate the max widths of the XferSize and PktCnt
++	 * fields in the HCTSIZn register.
++	 */
++	hc->do_ping = _qh->ping_state;
++	hc->ep_is_in = (usb_pipein(urb->pipe) != 0);
++	hc->data_pid_start = _qh->data_toggle;
++	hc->multi_count = 1;
++
++	if (_hcd->core_if->dma_enable) {
++		hc->xfer_buff = (uint8_t *)(u32)urb->transfer_dma + urb->actual_length;
++	} else {
++		hc->xfer_buff = (uint8_t *)urb->transfer_buffer + urb->actual_length;
++	}
++	hc->xfer_len = urb->transfer_buffer_length - urb->actual_length;
++	hc->xfer_count = 0;
++
++	/*
++	 * Set the split attributes
++	 */
++	hc->do_split = 0;
++	if (_qh->do_split) {
++		hc->do_split = 1;
++		hc->xact_pos = qtd->isoc_split_pos;
++		hc->complete_split = qtd->complete_split;
++		hc->hub_addr = urb->dev->tt->hub->devnum;
++		hc->port_addr = urb->dev->ttport;
++	}
++
++	switch (usb_pipetype(urb->pipe)) {
++		case PIPE_CONTROL:
++			hc->ep_type = DWC_OTG_EP_TYPE_CONTROL;
++			switch (qtd->control_phase) {
++				case DWC_OTG_CONTROL_SETUP:
++					DWC_DEBUGPL(DBG_HCDV, "  Control setup transaction\n");
++					hc->do_ping = 0;
++					hc->ep_is_in = 0;
++					hc->data_pid_start = DWC_OTG_HC_PID_SETUP;
++					if (_hcd->core_if->dma_enable) {
++						hc->xfer_buff = (uint8_t *)(u32)urb->setup_dma;
++					} else {
++						hc->xfer_buff = (uint8_t *)urb->setup_packet;
++					}
++					hc->xfer_len = 8;
++					break;
++				case DWC_OTG_CONTROL_DATA:
++					DWC_DEBUGPL(DBG_HCDV, "  Control data transaction\n");
++					hc->data_pid_start = qtd->data_toggle;
++					break;
++				case DWC_OTG_CONTROL_STATUS:
++					/*
++					 * Direction is opposite of data direction or IN if no
++					 * data.
++					 */
++					DWC_DEBUGPL(DBG_HCDV, "  Control status transaction\n");
++					if (urb->transfer_buffer_length == 0) {
++						hc->ep_is_in = 1;
++					} else {
++						hc->ep_is_in = (usb_pipein(urb->pipe) != USB_DIR_IN);
++					}
++					if (hc->ep_is_in) {
++						hc->do_ping = 0;
++					}
++					hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
++					hc->xfer_len = 0;
++					if (_hcd->core_if->dma_enable) {
++						hc->xfer_buff = (uint8_t *)_hcd->status_buf_dma;
++					} else {
++						hc->xfer_buff = (uint8_t *)_hcd->status_buf;
++					}
++					break;
++			}
++			break;
++		case PIPE_BULK:
++			hc->ep_type = DWC_OTG_EP_TYPE_BULK;
++			break;
++		case PIPE_INTERRUPT:
++			hc->ep_type = DWC_OTG_EP_TYPE_INTR;
++			break;
++		case PIPE_ISOCHRONOUS:
++			{
++				struct usb_iso_packet_descriptor *frame_desc;
++				frame_desc = &urb->iso_frame_desc[qtd->isoc_frame_index];
++				hc->ep_type = DWC_OTG_EP_TYPE_ISOC;
++				if (_hcd->core_if->dma_enable) {
++					hc->xfer_buff = (uint8_t *)(u32)urb->transfer_dma;
++				} else {
++					hc->xfer_buff = (uint8_t *)urb->transfer_buffer;
++				}
++				hc->xfer_buff += frame_desc->offset + qtd->isoc_split_offset;
++				hc->xfer_len = frame_desc->length - qtd->isoc_split_offset;
++
++				if (hc->xact_pos == DWC_HCSPLIT_XACTPOS_ALL) {
++					if (hc->xfer_len <= 188) {
++						hc->xact_pos = DWC_HCSPLIT_XACTPOS_ALL;
++					}
++					else {
++						hc->xact_pos = DWC_HCSPLIT_XACTPOS_BEGIN;
++					}
++				}
++			}
++			break;
++	}
++
++	if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++			hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++		/*
++		 * This value may be modified when the transfer is started to
++		 * reflect the actual transfer length.
++		 */
++		hc->multi_count = dwc_hb_mult(_qh->maxp);
++	}
++
++	dwc_otg_hc_init(_hcd->core_if, hc);
++	hc->qh = _qh;
++}
++#define DEBUG_HOST_CHANNELS
++#ifdef DEBUG_HOST_CHANNELS
++static int last_sel_trans_num_per_scheduled = 0;
++module_param(last_sel_trans_num_per_scheduled, int, 0444);
++
++static int last_sel_trans_num_nonper_scheduled = 0;
++module_param(last_sel_trans_num_nonper_scheduled, int, 0444);
++
++static int last_sel_trans_num_avail_hc_at_start = 0;
++module_param(last_sel_trans_num_avail_hc_at_start, int, 0444);
++
++static int last_sel_trans_num_avail_hc_at_end = 0;
++module_param(last_sel_trans_num_avail_hc_at_end, int, 0444);
++#endif /* DEBUG_HOST_CHANNELS */
++
++/**
++ * This function selects transactions from the HCD transfer schedule and
++ * assigns them to available host channels. It is called from HCD interrupt
++ * handler functions.
++ *
++ * @param _hcd The HCD state structure.
++ *
++ * @return The types of new transactions that were assigned to host channels.
++ */
++dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *_hcd)
++{
++	struct list_head 		*qh_ptr;
++	dwc_otg_qh_t 			*qh;
++	int				num_channels;
++	unsigned long flags;
++	dwc_otg_transaction_type_e	ret_val = DWC_OTG_TRANSACTION_NONE;
++
++#ifdef DEBUG_SOF
++	DWC_DEBUGPL(DBG_HCD, "  Select Transactions\n");
++#endif	/*  */
++
++#ifdef DEBUG_HOST_CHANNELS
++	last_sel_trans_num_per_scheduled = 0;
++	last_sel_trans_num_nonper_scheduled = 0;
++	last_sel_trans_num_avail_hc_at_start = _hcd->available_host_channels;
++#endif /* DEBUG_HOST_CHANNELS */
++
++	/* Process entries in the periodic ready list. */
++	num_channels = _hcd->core_if->core_params->host_channels;
++	qh_ptr = _hcd->periodic_sched_ready.next;
++	while (qh_ptr != &_hcd->periodic_sched_ready
++			&& !list_empty(&_hcd->free_hc_list)) {
++
++		// Make sure we leave one channel for non periodic transactions.
++		local_irq_save(flags);
++		if (_hcd->available_host_channels <= 1) {
++			local_irq_restore(flags);
++			break;
++		}
++		_hcd->available_host_channels--;
++		local_irq_restore(flags);
++#ifdef DEBUG_HOST_CHANNELS
++		last_sel_trans_num_per_scheduled++;
++#endif /* DEBUG_HOST_CHANNELS */
++
++		qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++		assign_and_init_hc(_hcd, qh);
++
++		/*
++		 * Move the QH from the periodic ready schedule to the
++		 * periodic assigned schedule.
++		 */
++		qh_ptr = qh_ptr->next;
++		local_irq_save(flags);
++		list_move(&qh->qh_list_entry, &_hcd->periodic_sched_assigned);
++		local_irq_restore(flags);
++		ret_val = DWC_OTG_TRANSACTION_PERIODIC;
++	}
++
++	/*
++	 * Process entries in the deferred portion of the non-periodic list.
++	 * A NAK put them here and, at the right time, they need to be
++	 * placed on the sched_inactive list.
++	 */
++	qh_ptr = _hcd->non_periodic_sched_deferred.next;
++	while (qh_ptr != &_hcd->non_periodic_sched_deferred) {
++		uint16_t frame_number =
++			dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(_hcd));
++		qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++		qh_ptr = qh_ptr->next;
++
++		if (dwc_frame_num_le(qh->sched_frame, frame_number)) {
++			// NAK did this
++			/*
++			 * Move the QH from the non periodic deferred schedule to
++			 * the non periodic inactive schedule.
++			 */
++			local_irq_save(flags);
++			list_move(&qh->qh_list_entry,
++					&_hcd->non_periodic_sched_inactive);
++			local_irq_restore(flags);
++		}
++	}
++
++	/*
++	 * Process entries in the inactive portion of the non-periodic
++	 * schedule. Some free host channels may not be used if they are
++	 * reserved for periodic transfers.
++	 */
++	qh_ptr = _hcd->non_periodic_sched_inactive.next;
++	num_channels = _hcd->core_if->core_params->host_channels;
++	while (qh_ptr != &_hcd->non_periodic_sched_inactive
++			&& !list_empty(&_hcd->free_hc_list)) {
++
++		local_irq_save(flags);
++		if (_hcd->available_host_channels < 1) {
++			local_irq_restore(flags);
++			break;
++		}
++		_hcd->available_host_channels--;
++		local_irq_restore(flags);
++#ifdef DEBUG_HOST_CHANNELS
++		last_sel_trans_num_nonper_scheduled++;
++#endif /* DEBUG_HOST_CHANNELS */
++
++		qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++		assign_and_init_hc(_hcd, qh);
++
++		/*
++		 * Move the QH from the non-periodic inactive schedule to the
++		 * non-periodic active schedule.
++		 */
++		qh_ptr = qh_ptr->next;
++		local_irq_save(flags);
++		list_move(&qh->qh_list_entry, &_hcd->non_periodic_sched_active);
++		local_irq_restore(flags);
++
++		if (ret_val == DWC_OTG_TRANSACTION_NONE) {
++			ret_val = DWC_OTG_TRANSACTION_NON_PERIODIC;
++		} else {
++			ret_val = DWC_OTG_TRANSACTION_ALL;
++		}
++
++	}
++#ifdef DEBUG_HOST_CHANNELS
++	last_sel_trans_num_avail_hc_at_end = _hcd->available_host_channels;
++#endif /* DEBUG_HOST_CHANNELS */
++
++	return ret_val;
++}
++
++/**
++ * Attempts to queue a single transaction request for a host channel
++ * associated with either a periodic or non-periodic transfer. This function
++ * assumes that there is space available in the appropriate request queue. For
++ * an OUT transfer or SETUP transaction in Slave mode, it checks whether space
++ * is available in the appropriate Tx FIFO.
++ *
++ * @param _hcd The HCD state structure.
++ * @param _hc Host channel descriptor associated with either a periodic or
++ * non-periodic transfer.
++ * @param _fifo_dwords_avail Number of DWORDs available in the periodic Tx
++ * FIFO for periodic transfers or the non-periodic Tx FIFO for non-periodic
++ * transfers.
++ *
++ * @return 1 if a request is queued and more requests may be needed to
++ * complete the transfer, 0 if no more requests are required for this
++ * transfer, -1 if there is insufficient space in the Tx FIFO.
++ */
++static int queue_transaction(dwc_otg_hcd_t *_hcd,
++		dwc_hc_t *_hc,
++		uint16_t _fifo_dwords_avail)
++{
++	int retval;
++
++	if (_hcd->core_if->dma_enable) {
++		if (!_hc->xfer_started) {
++			dwc_otg_hc_start_transfer(_hcd->core_if, _hc);
++			_hc->qh->ping_state = 0;
++		}
++		retval = 0;
++	} else 	if (_hc->halt_pending) {
++		/* Don't queue a request if the channel has been halted. */
++		retval = 0;
++	} else if (_hc->halt_on_queue) {
++		dwc_otg_hc_halt(_hcd->core_if, _hc, _hc->halt_status);
++		retval = 0;
++	} else if (_hc->do_ping) {
++		if (!_hc->xfer_started) {
++			dwc_otg_hc_start_transfer(_hcd->core_if, _hc);
++		}
++		retval = 0;
++	} else if (!_hc->ep_is_in ||
++			_hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
++		if ((_fifo_dwords_avail * 4) >= _hc->max_packet) {
++			if (!_hc->xfer_started) {
++				dwc_otg_hc_start_transfer(_hcd->core_if, _hc);
++				retval = 1;
++			} else {
++				retval = dwc_otg_hc_continue_transfer(_hcd->core_if, _hc);
++			}
++		} else {
++			retval = -1;
++		}
++	} else {		
++		if (!_hc->xfer_started) {
++			dwc_otg_hc_start_transfer(_hcd->core_if, _hc);
++			retval = 1;
++		} else {
++			retval = dwc_otg_hc_continue_transfer(_hcd->core_if, _hc);
++		}
++	}
++
++	return retval;
++}
++
++/**
++ * Processes active non-periodic channels and queues transactions for these
++ * channels to the DWC_otg controller. After queueing transactions, the NP Tx
++ * FIFO Empty interrupt is enabled if there are more transactions to queue as
++ * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx
++ * FIFO Empty interrupt is disabled.
++ */
++static void process_non_periodic_channels(dwc_otg_hcd_t *_hcd)
++{
++	gnptxsts_data_t		tx_status;
++	struct list_head	*orig_qh_ptr;
++	dwc_otg_qh_t		*qh;
++	int			status;
++	int			no_queue_space = 0;
++	int			no_fifo_space = 0;
++	int			more_to_do = 0;
++
++	dwc_otg_core_global_regs_t *global_regs = _hcd->core_if->core_global_regs;
++
++	DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n");
++#ifdef DEBUG	
++	tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++	DWC_DEBUGPL(DBG_HCDV, "  NP Tx Req Queue Space Avail (before queue): %d\n",
++			tx_status.b.nptxqspcavail);
++	DWC_DEBUGPL(DBG_HCDV, "  NP Tx FIFO Space Avail (before queue): %d\n",
++			tx_status.b.nptxfspcavail);
++#endif
++	/*
++	 * Keep track of the starting point. Skip over the start-of-list
++	 * entry.
++	 */
++	if (_hcd->non_periodic_qh_ptr == &_hcd->non_periodic_sched_active) {
++		_hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next;
++	}
++	orig_qh_ptr = _hcd->non_periodic_qh_ptr;
++
++	/*
++	 * Process once through the active list or until no more space is
++	 * available in the request queue or the Tx FIFO.
++	 */
++	do {
++		tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++		if (!_hcd->core_if->dma_enable && tx_status.b.nptxqspcavail == 0) {
++			no_queue_space = 1;
++			break;
++		}
++
++		qh = list_entry(_hcd->non_periodic_qh_ptr, dwc_otg_qh_t, qh_list_entry);
++		status = queue_transaction(_hcd, qh->channel, tx_status.b.nptxfspcavail);
++
++		if (status > 0) {
++			more_to_do = 1;
++		} else if (status < 0) {
++			no_fifo_space = 1;
++			break;
++		}
++
++		/* Advance to next QH, skipping start-of-list entry. */
++		_hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next;
++		if (_hcd->non_periodic_qh_ptr == &_hcd->non_periodic_sched_active) {
++			_hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next;
++		}
++
++	} while (_hcd->non_periodic_qh_ptr != orig_qh_ptr);
++
++	if (!_hcd->core_if->dma_enable) {
++		gintmsk_data_t intr_mask = {.d32 = 0};
++		intr_mask.b.nptxfempty = 1;
++
++#ifdef DEBUG	
++		tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++		DWC_DEBUGPL(DBG_HCDV, "  NP Tx Req Queue Space Avail (after queue): %d\n",
++				tx_status.b.nptxqspcavail);
++		DWC_DEBUGPL(DBG_HCDV, "  NP Tx FIFO Space Avail (after queue): %d\n",
++				tx_status.b.nptxfspcavail);
++#endif
++		if (more_to_do || no_queue_space || no_fifo_space) {
++			/*
++			 * May need to queue more transactions as the request
++			 * queue or Tx FIFO empties. Enable the non-periodic
++			 * Tx FIFO empty interrupt. (Always use the half-empty
++			 * level to ensure that new requests are loaded as
++			 * soon as possible.)
++			 */
++			dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
++		} else {
++			/*
++			 * Disable the Tx FIFO empty interrupt since there are
++			 * no more transactions that need to be queued right
++			 * now. This function is called from interrupt
++			 * handlers to queue more transactions as transfer
++			 * states change.
++			 */
++			dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
++		}
++	}
++}
++
++/**
++ * Processes periodic channels for the next frame and queues transactions for
++ * these channels to the DWC_otg controller. After queueing transactions, the
++ * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions
++ * to queue as Periodic Tx FIFO or request queue space becomes available.
++ * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled.
++ */
++static void process_periodic_channels(dwc_otg_hcd_t *_hcd)
++{
++	hptxsts_data_t		tx_status;
++	struct list_head	*qh_ptr;
++	dwc_otg_qh_t		*qh;
++	int			status;
++	int 			no_queue_space = 0;
++	int			no_fifo_space = 0;
++
++	dwc_otg_host_global_regs_t *host_regs;
++	host_regs = _hcd->core_if->host_if->host_global_regs;
++
++	DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n");
++#ifdef DEBUG	
++	tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
++	DWC_DEBUGPL(DBG_HCDV, "  P Tx Req Queue Space Avail (before queue): %d\n",
++			tx_status.b.ptxqspcavail);
++	DWC_DEBUGPL(DBG_HCDV, "  P Tx FIFO Space Avail (before queue): %d\n",
++			tx_status.b.ptxfspcavail);
++#endif
++
++	qh_ptr = _hcd->periodic_sched_assigned.next;
++	while (qh_ptr != &_hcd->periodic_sched_assigned) {
++		tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
++		if (tx_status.b.ptxqspcavail == 0) {
++			no_queue_space = 1;
++			break;
++		}
++
++		qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++
++		/*
++		 * Set a flag if we're queuing high-bandwidth in slave mode.
++		 * The flag prevents any halts to get into the request queue in
++		 * the middle of multiple high-bandwidth packets getting queued.
++		 */
++		if ((!_hcd->core_if->dma_enable) && 
++				(qh->channel->multi_count > 1)) 
++		{
++			_hcd->core_if->queuing_high_bandwidth = 1;
++		}
++
++		status = queue_transaction(_hcd, qh->channel, tx_status.b.ptxfspcavail);
++		if (status < 0) {
++			no_fifo_space = 1;
++			break;
++		}
++
++		/*
++		 * In Slave mode, stay on the current transfer until there is
++		 * nothing more to do or the high-bandwidth request count is
++		 * reached. In DMA mode, only need to queue one request. The
++		 * controller automatically handles multiple packets for
++		 * high-bandwidth transfers.
++		 */
++		if (_hcd->core_if->dma_enable ||
++				(status == 0 ||
++				 qh->channel->requests == qh->channel->multi_count)) {
++			qh_ptr = qh_ptr->next;
++			/*
++			 * Move the QH from the periodic assigned schedule to
++			 * the periodic queued schedule.
++			 */
++			list_move(&qh->qh_list_entry, &_hcd->periodic_sched_queued);
++
++			/* done queuing high bandwidth */
++			_hcd->core_if->queuing_high_bandwidth = 0;
++		}
++	}
++
++	if (!_hcd->core_if->dma_enable) {
++		dwc_otg_core_global_regs_t *global_regs;
++		gintmsk_data_t intr_mask = {.d32 = 0};
++
++		global_regs = _hcd->core_if->core_global_regs;
++		intr_mask.b.ptxfempty = 1;
++#ifdef DEBUG	
++		tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
++		DWC_DEBUGPL(DBG_HCDV, "  P Tx Req Queue Space Avail (after queue): %d\n",
++				tx_status.b.ptxqspcavail);
++		DWC_DEBUGPL(DBG_HCDV, "  P Tx FIFO Space Avail (after queue): %d\n",
++				tx_status.b.ptxfspcavail);
++#endif
++		if (!(list_empty(&_hcd->periodic_sched_assigned)) ||
++				no_queue_space || no_fifo_space) {
++			/*
++			 * May need to queue more transactions as the request
++			 * queue or Tx FIFO empties. Enable the periodic Tx
++			 * FIFO empty interrupt. (Always use the half-empty
++			 * level to ensure that new requests are loaded as
++			 * soon as possible.)
++			 */
++			dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
++		} else {
++			/*
++			 * Disable the Tx FIFO empty interrupt since there are
++			 * no more transactions that need to be queued right
++			 * now. This function is called from interrupt
++			 * handlers to queue more transactions as transfer
++			 * states change.
++			 */
++			dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
++		}
++	}		
++}
++
++/**
++ * This function processes the currently active host channels and queues
++ * transactions for these channels to the DWC_otg controller. It is called
++ * from HCD interrupt handler functions.
++ *
++ * @param _hcd The HCD state structure.
++ * @param _tr_type The type(s) of transactions to queue (non-periodic,
++ * periodic, or both).
++ */
++void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *_hcd,
++		dwc_otg_transaction_type_e _tr_type)
++{
++#ifdef DEBUG_SOF
++	DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n");
++#endif
++	/* Process host channels associated with periodic transfers. */
++	if ((_tr_type == DWC_OTG_TRANSACTION_PERIODIC ||
++				_tr_type == DWC_OTG_TRANSACTION_ALL) &&
++			!list_empty(&_hcd->periodic_sched_assigned)) {
++
++		process_periodic_channels(_hcd);
++	}
++
++	/* Process host channels associated with non-periodic transfers. */
++	if ((_tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC ||
++				_tr_type == DWC_OTG_TRANSACTION_ALL)) {
++		if (!list_empty(&_hcd->non_periodic_sched_active)) {
++			process_non_periodic_channels(_hcd);
++		} else {
++			/*
++			 * Ensure NP Tx FIFO empty interrupt is disabled when
++			 * there are no non-periodic transfers to process.
++			 */
++			gintmsk_data_t gintmsk = {.d32 = 0};
++			gintmsk.b.nptxfempty = 1;
++			dwc_modify_reg32(&_hcd->core_if->core_global_regs->gintmsk, gintmsk.d32, 0);
++		}
++	}
++}
++
++/**
++ * Sets the final status of an URB and returns it to the device driver. Any
++ * required cleanup of the URB is performed.
++ */
++void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t * _hcd, struct urb *_urb,
++		int _status)
++	__releases(_hcd->lock)
++__acquires(_hcd->lock)
++{
++#ifdef DEBUG
++	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++		DWC_PRINT("%s: urb %p, device %d, ep %d %s, status=%d\n",
++				__func__, _urb, usb_pipedevice(_urb->pipe),
++				usb_pipeendpoint(_urb->pipe),
++				usb_pipein(_urb->pipe) ? "IN" : "OUT", _status);
++		if (usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS) {
++			int i;
++			for (i = 0; i < _urb->number_of_packets; i++) {
++				DWC_PRINT("  ISO Desc %d status: %d\n",
++						i, _urb->iso_frame_desc[i].status);
++			}
++		}
++	}
++#endif
++
++	_urb->status = _status;
++	_urb->hcpriv = NULL;
++	usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(_hcd), _urb);
++	spin_unlock(&_hcd->lock);
++	usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(_hcd), _urb, _status);
++	spin_lock(&_hcd->lock);
++}
++
++/*
++ * Returns the Queue Head for an URB.
++ */
++dwc_otg_qh_t *dwc_urb_to_qh(struct urb *_urb)
++{
++	struct usb_host_endpoint *ep = dwc_urb_to_endpoint(_urb);
++	return (dwc_otg_qh_t *)ep->hcpriv;
++}
++
++#ifdef DEBUG
++void dwc_print_setup_data (uint8_t *setup)
++{
++	int i;
++	if (CHK_DEBUG_LEVEL(DBG_HCD)){
++		DWC_PRINT("Setup Data = MSB ");
++		for (i=7; i>=0; i--) DWC_PRINT ("%02x ", setup[i]);
++		DWC_PRINT("\n");
++		DWC_PRINT("  bmRequestType Tranfer = %s\n", (setup[0]&0x80) ? "Device-to-Host" : "Host-to-Device");
++		DWC_PRINT("  bmRequestType Type = ");
++		switch ((setup[0]&0x60) >> 5) {
++			case 0: DWC_PRINT("Standard\n"); break;
++			case 1:	DWC_PRINT("Class\n"); break;
++			case 2:	DWC_PRINT("Vendor\n"); break;
++			case 3: DWC_PRINT("Reserved\n"); break;
++		}
++		DWC_PRINT("  bmRequestType Recipient = ");
++		switch (setup[0]&0x1f) {
++			case 0: DWC_PRINT("Device\n"); break;
++			case 1: DWC_PRINT("Interface\n"); break;
++			case 2: DWC_PRINT("Endpoint\n"); break;
++			case 3: DWC_PRINT("Other\n"); break;
++			default: DWC_PRINT("Reserved\n"); break;
++		}
++		DWC_PRINT("  bRequest = 0x%0x\n", setup[1]);
++		DWC_PRINT("  wValue = 0x%0x\n", *((uint16_t *)&setup[2]));
++		DWC_PRINT("  wIndex = 0x%0x\n", *((uint16_t *)&setup[4]));
++		DWC_PRINT("  wLength = 0x%0x\n\n", *((uint16_t *)&setup[6]));
++	}
++}
++#endif
++
++void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *_hcd) {
++#ifdef DEBUG
++#if 0
++	DWC_PRINT("Frame remaining at SOF:\n");
++	DWC_PRINT("  samples %u, accum %llu, avg %llu\n",
++			_hcd->frrem_samples, _hcd->frrem_accum,
++			(_hcd->frrem_samples > 0) ?
++			_hcd->frrem_accum/_hcd->frrem_samples : 0);
++
++	DWC_PRINT("\n");
++	DWC_PRINT("Frame remaining at start_transfer (uframe 7):\n");
++	DWC_PRINT("  samples %u, accum %u, avg %u\n",
++			_hcd->core_if->hfnum_7_samples, _hcd->core_if->hfnum_7_frrem_accum,
++			(_hcd->core_if->hfnum_7_samples > 0) ?
++			_hcd->core_if->hfnum_7_frrem_accum/_hcd->core_if->hfnum_7_samples : 0);
++	DWC_PRINT("Frame remaining at start_transfer (uframe 0):\n");
++	DWC_PRINT("  samples %u, accum %u, avg %u\n",
++			_hcd->core_if->hfnum_0_samples, _hcd->core_if->hfnum_0_frrem_accum,
++			(_hcd->core_if->hfnum_0_samples > 0) ?
++			_hcd->core_if->hfnum_0_frrem_accum/_hcd->core_if->hfnum_0_samples : 0);
++	DWC_PRINT("Frame remaining at start_transfer (uframe 1-6):\n");
++	DWC_PRINT("  samples %u, accum %u, avg %u\n",
++			_hcd->core_if->hfnum_other_samples, _hcd->core_if->hfnum_other_frrem_accum,
++			(_hcd->core_if->hfnum_other_samples > 0) ?
++			_hcd->core_if->hfnum_other_frrem_accum/_hcd->core_if->hfnum_other_samples : 0);
++
++	DWC_PRINT("\n");
++	DWC_PRINT("Frame remaining at sample point A (uframe 7):\n");
++	DWC_PRINT("  samples %u, accum %llu, avg %llu\n",
++			_hcd->hfnum_7_samples_a, _hcd->hfnum_7_frrem_accum_a,
++			(_hcd->hfnum_7_samples_a > 0) ?
++			_hcd->hfnum_7_frrem_accum_a/_hcd->hfnum_7_samples_a : 0);
++	DWC_PRINT("Frame remaining at sample point A (uframe 0):\n");
++	DWC_PRINT("  samples %u, accum %llu, avg %llu\n",
++			_hcd->hfnum_0_samples_a, _hcd->hfnum_0_frrem_accum_a,
++			(_hcd->hfnum_0_samples_a > 0) ?
++			_hcd->hfnum_0_frrem_accum_a/_hcd->hfnum_0_samples_a : 0);
++	DWC_PRINT("Frame remaining at sample point A (uframe 1-6):\n");
++	DWC_PRINT("  samples %u, accum %llu, avg %llu\n",
++			_hcd->hfnum_other_samples_a, _hcd->hfnum_other_frrem_accum_a,
++			(_hcd->hfnum_other_samples_a > 0) ?
++			_hcd->hfnum_other_frrem_accum_a/_hcd->hfnum_other_samples_a : 0);
++
++	DWC_PRINT("\n");
++	DWC_PRINT("Frame remaining at sample point B (uframe 7):\n");
++	DWC_PRINT("  samples %u, accum %llu, avg %llu\n",
++			_hcd->hfnum_7_samples_b, _hcd->hfnum_7_frrem_accum_b,
++			(_hcd->hfnum_7_samples_b > 0) ?
++			_hcd->hfnum_7_frrem_accum_b/_hcd->hfnum_7_samples_b : 0);
++	DWC_PRINT("Frame remaining at sample point B (uframe 0):\n");
++	DWC_PRINT("  samples %u, accum %llu, avg %llu\n",
++			_hcd->hfnum_0_samples_b, _hcd->hfnum_0_frrem_accum_b,
++			(_hcd->hfnum_0_samples_b > 0) ?
++			_hcd->hfnum_0_frrem_accum_b/_hcd->hfnum_0_samples_b : 0);
++	DWC_PRINT("Frame remaining at sample point B (uframe 1-6):\n");
++	DWC_PRINT("  samples %u, accum %llu, avg %llu\n",
++			_hcd->hfnum_other_samples_b, _hcd->hfnum_other_frrem_accum_b,
++			(_hcd->hfnum_other_samples_b > 0) ?
++			_hcd->hfnum_other_frrem_accum_b/_hcd->hfnum_other_samples_b : 0);
++#endif
++#endif	
++}
++
++void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *_hcd)
++{
++#ifdef DEBUG
++	int num_channels;
++	int i;
++	gnptxsts_data_t	np_tx_status;
++	hptxsts_data_t p_tx_status;
++
++	num_channels = _hcd->core_if->core_params->host_channels;
++	DWC_PRINT("\n");
++	DWC_PRINT("************************************************************\n");
++	DWC_PRINT("HCD State:\n");
++	DWC_PRINT("  Num channels: %d\n", num_channels);
++	for (i = 0; i < num_channels; i++) {
++		dwc_hc_t *hc = _hcd->hc_ptr_array[i];
++		DWC_PRINT("  Channel %d:\n", i);
++		DWC_PRINT("    dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
++				hc->dev_addr, hc->ep_num, hc->ep_is_in);
++		DWC_PRINT("    speed: %d\n", hc->speed);
++		DWC_PRINT("    ep_type: %d\n", hc->ep_type);
++		DWC_PRINT("    max_packet: %d\n", hc->max_packet);
++		DWC_PRINT("    data_pid_start: %d\n", hc->data_pid_start);
++		DWC_PRINT("    multi_count: %d\n", hc->multi_count);
++		DWC_PRINT("    xfer_started: %d\n", hc->xfer_started);
++		DWC_PRINT("    xfer_buff: %p\n", hc->xfer_buff);
++		DWC_PRINT("    xfer_len: %d\n", hc->xfer_len);
++		DWC_PRINT("    xfer_count: %d\n", hc->xfer_count);
++		DWC_PRINT("    halt_on_queue: %d\n", hc->halt_on_queue);
++		DWC_PRINT("    halt_pending: %d\n", hc->halt_pending);
++		DWC_PRINT("    halt_status: %d\n", hc->halt_status);
++		DWC_PRINT("    do_split: %d\n", hc->do_split);
++		DWC_PRINT("    complete_split: %d\n", hc->complete_split);
++		DWC_PRINT("    hub_addr: %d\n", hc->hub_addr);
++		DWC_PRINT("    port_addr: %d\n", hc->port_addr);
++		DWC_PRINT("    xact_pos: %d\n", hc->xact_pos);
++		DWC_PRINT("    requests: %d\n", hc->requests);
++		DWC_PRINT("    qh: %p\n", hc->qh);
++		if (hc->xfer_started) {
++			hfnum_data_t hfnum;
++			hcchar_data_t hcchar;
++			hctsiz_data_t hctsiz;
++			hcint_data_t hcint;
++			hcintmsk_data_t hcintmsk;
++			hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum);
++			hcchar.d32 = dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]->hcchar);
++			hctsiz.d32 = dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]->hctsiz);
++			hcint.d32 = dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]->hcint);
++			hcintmsk.d32 = dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]->hcintmsk);
++			DWC_PRINT("    hfnum: 0x%08x\n", hfnum.d32);
++			DWC_PRINT("    hcchar: 0x%08x\n", hcchar.d32);
++			DWC_PRINT("    hctsiz: 0x%08x\n", hctsiz.d32);
++			DWC_PRINT("    hcint: 0x%08x\n", hcint.d32);
++			DWC_PRINT("    hcintmsk: 0x%08x\n", hcintmsk.d32);
++		}
++		if (hc->xfer_started && (hc->qh != NULL) && (hc->qh->qtd_in_process != NULL)) {
++			dwc_otg_qtd_t *qtd;
++			struct urb *urb;
++			qtd = hc->qh->qtd_in_process;
++			urb = qtd->urb;
++			DWC_PRINT("    URB Info:\n");
++			DWC_PRINT("      qtd: %p, urb: %p\n", qtd, urb);
++			if (urb != NULL) {
++				DWC_PRINT("      Dev: %d, EP: %d %s\n",
++						usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe),
++						usb_pipein(urb->pipe) ? "IN" : "OUT");
++				DWC_PRINT("      Max packet size: %d\n",
++						usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
++				DWC_PRINT("      transfer_buffer: %p\n", urb->transfer_buffer);
++				DWC_PRINT("      transfer_dma: %p\n", (void *)urb->transfer_dma);
++				DWC_PRINT("      transfer_buffer_length: %d\n", urb->transfer_buffer_length);
++				DWC_PRINT("      actual_length: %d\n", urb->actual_length);
++			}
++		}
++	}
++	//DWC_PRINT("  non_periodic_channels: %d\n", _hcd->non_periodic_channels);
++	//DWC_PRINT("  periodic_channels: %d\n", _hcd->periodic_channels);
++	DWC_PRINT("  available_channels: %d\n", _hcd->available_host_channels);
++	DWC_PRINT("  periodic_usecs: %d\n", _hcd->periodic_usecs);
++	np_tx_status.d32 = dwc_read_reg32(&_hcd->core_if->core_global_regs->gnptxsts);
++	DWC_PRINT("  NP Tx Req Queue Space Avail: %d\n", np_tx_status.b.nptxqspcavail);
++	DWC_PRINT("  NP Tx FIFO Space Avail: %d\n", np_tx_status.b.nptxfspcavail);
++	p_tx_status.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hptxsts);
++	DWC_PRINT("  P Tx Req Queue Space Avail: %d\n", p_tx_status.b.ptxqspcavail);
++	DWC_PRINT("  P Tx FIFO Space Avail: %d\n", p_tx_status.b.ptxfspcavail);
++	dwc_otg_hcd_dump_frrem(_hcd);
++	dwc_otg_dump_global_registers(_hcd->core_if);
++	dwc_otg_dump_host_registers(_hcd->core_if);
++	DWC_PRINT("************************************************************\n");
++	DWC_PRINT("\n");
++#endif
++}
++#endif /* DWC_DEVICE_ONLY */
+diff --git a/drivers/usb/dwc_otg/dwc_otg_hcd.h b/drivers/usb/dwc_otg/dwc_otg_hcd.h
+new file mode 100644
+index 0000000..8a20dff
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_hcd.h
+@@ -0,0 +1,676 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd.h $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 537387 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++#if !defined(__DWC_HCD_H__)
++#define __DWC_HCD_H__
++
++#include <linux/list.h>
++#include <linux/usb.h>
++#include <linux/usb/hcd.h>
++
++struct lm_device;
++struct dwc_otg_device;
++
++#include "dwc_otg_cil.h"
++//#include "dwc_otg_ifx.h" // winder
++
++
++/**
++ * @file
++ *
++ * This file contains the structures, constants, and interfaces for
++ * the Host Contoller Driver (HCD).
++ *
++ * The Host Controller Driver (HCD) is responsible for translating requests
++ * from the USB Driver into the appropriate actions on the DWC_otg controller.
++ * It isolates the USBD from the specifics of the controller by providing an
++ * API to the USBD.
++ */
++
++/**
++ * Phases for control transfers.
++ */
++typedef enum dwc_otg_control_phase {
++	DWC_OTG_CONTROL_SETUP,
++	DWC_OTG_CONTROL_DATA,
++	DWC_OTG_CONTROL_STATUS
++} dwc_otg_control_phase_e;
++
++/** Transaction types. */
++typedef enum dwc_otg_transaction_type {
++	DWC_OTG_TRANSACTION_NONE,
++	DWC_OTG_TRANSACTION_PERIODIC,
++	DWC_OTG_TRANSACTION_NON_PERIODIC,
++	DWC_OTG_TRANSACTION_ALL
++} dwc_otg_transaction_type_e;
++
++/**
++ * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control,
++ * interrupt, or isochronous transfer. A single QTD is created for each URB
++ * (of one of these types) submitted to the HCD. The transfer associated with
++ * a QTD may require one or multiple transactions.
++ *
++ * A QTD is linked to a Queue Head, which is entered in either the
++ * non-periodic or periodic schedule for execution. When a QTD is chosen for
++ * execution, some or all of its transactions may be executed. After
++ * execution, the state of the QTD is updated. The QTD may be retired if all
++ * its transactions are complete or if an error occurred. Otherwise, it
++ * remains in the schedule so more transactions can be executed later.
++ */
++struct dwc_otg_qh;
++typedef struct dwc_otg_qtd {
++	/**
++	 * Determines the PID of the next data packet for the data phase of
++	 * control transfers. Ignored for other transfer types.<br>
++	 * One of the following values:
++	 *	- DWC_OTG_HC_PID_DATA0
++	 *	- DWC_OTG_HC_PID_DATA1
++	 */
++	uint8_t			data_toggle;
++
++	/** Current phase for control transfers (Setup, Data, or Status). */
++	dwc_otg_control_phase_e	control_phase;
++
++	/** Keep track of the current split type
++	 * for FS/LS endpoints on a HS Hub */
++	uint8_t                 complete_split;
++
++	/** How many bytes transferred during SSPLIT OUT */
++	uint32_t                ssplit_out_xfer_count;
++
++	/**
++	 * Holds the number of bus errors that have occurred for a transaction
++	 * within this transfer.
++	 */
++	uint8_t 		error_count;
++
++	/**
++	 * Index of the next frame descriptor for an isochronous transfer. A
++	 * frame descriptor describes the buffer position and length of the
++	 * data to be transferred in the next scheduled (micro)frame of an
++	 * isochronous transfer. It also holds status for that transaction.
++	 * The frame index starts at 0.
++	 */
++	int			isoc_frame_index;
++
++	/** Position of the ISOC split on full/low speed */
++	uint8_t                 isoc_split_pos;
++
++	/** Position of the ISOC split in the buffer for the current frame */
++	uint16_t                isoc_split_offset;
++
++	/** URB for this transfer */
++	struct urb 		*urb;
++
++	/** This list of QTDs */
++	struct list_head  	qtd_list_entry;
++
++	/* Field to track the qh pointer */
++	struct dwc_otg_qh *qtd_qh_ptr;
++} dwc_otg_qtd_t;
++
++/**
++ * A Queue Head (QH) holds the static characteristics of an endpoint and
++ * maintains a list of transfers (QTDs) for that endpoint. A QH structure may
++ * be entered in either the non-periodic or periodic schedule.
++ */
++typedef struct dwc_otg_qh {
++	/**
++	 * Endpoint type.
++	 * One of the following values:
++	 * 	- USB_ENDPOINT_XFER_CONTROL
++	 *	- USB_ENDPOINT_XFER_ISOC
++	 *	- USB_ENDPOINT_XFER_BULK
++	 *	- USB_ENDPOINT_XFER_INT
++	 */
++	uint8_t 		ep_type;
++	uint8_t 		ep_is_in;
++
++	/** wMaxPacketSize Field of Endpoint Descriptor. */
++	uint16_t		maxp;
++
++	/**
++	 * Determines the PID of the next data packet for non-control
++	 * transfers. Ignored for control transfers.<br>
++	 * One of the following values:
++	 *	- DWC_OTG_HC_PID_DATA0
++	 * 	- DWC_OTG_HC_PID_DATA1
++	 */
++	uint8_t			data_toggle;
++
++	/** Ping state if 1. */
++	uint8_t 		ping_state;
++
++	/**
++	 * List of QTDs for this QH.
++	 */
++	struct list_head 	qtd_list;
++
++	/** Host channel currently processing transfers for this QH. */
++	dwc_hc_t		*channel;
++
++	/** QTD currently assigned to a host channel for this QH. */
++	dwc_otg_qtd_t		*qtd_in_process;
++
++	/** Full/low speed endpoint on high-speed hub requires split. */
++	uint8_t                 do_split;
++
++	/** @name Periodic schedule information */
++	/** @{ */
++
++	/** Bandwidth in microseconds per (micro)frame. */
++	uint8_t			usecs;
++
++	/** Interval between transfers in (micro)frames. */
++	uint16_t		interval;
++
++	/**
++	 * (micro)frame to initialize a periodic transfer. The transfer
++	 * executes in the following (micro)frame.
++	 */
++	uint16_t		sched_frame;
++
++	/** (micro)frame at which last start split was initialized. */
++	uint16_t		start_split_frame;
++
++	/** @} */
++
++	uint16_t speed;
++	uint16_t frame_usecs[8];
++	/** Entry for QH in either the periodic or non-periodic schedule. */
++	struct list_head        qh_list_entry;
++} dwc_otg_qh_t;
++
++/**
++ * This structure holds the state of the HCD, including the non-periodic and
++ * periodic schedules.
++ */
++typedef struct dwc_otg_hcd {
++	spinlock_t		lock;
++
++	/** DWC OTG Core Interface Layer */
++	dwc_otg_core_if_t       *core_if;
++
++	/** Internal DWC HCD Flags */	
++	volatile union dwc_otg_hcd_internal_flags {
++		uint32_t d32;
++		struct {
++			unsigned port_connect_status_change : 1;
++			unsigned port_connect_status : 1;
++			unsigned port_reset_change : 1;
++			unsigned port_enable_change : 1;
++			unsigned port_suspend_change : 1;
++			unsigned port_over_current_change : 1;
++			unsigned reserved : 27;
++		} b;
++	} flags;
++
++	/**
++	 * Inactive items in the non-periodic schedule. This is a list of
++	 * Queue Heads. Transfers associated with these Queue Heads are not
++	 * currently assigned to a host channel.
++	 */
++	struct list_head 	non_periodic_sched_inactive;
++
++	/**
++	 * Deferred items in the non-periodic schedule. This is a list of
++	 * Queue Heads. Transfers associated with these Queue Heads are not
++	 * currently assigned to a host channel.
++	 * When we get an NAK, the QH goes here.
++	 */
++	struct list_head 	non_periodic_sched_deferred;
++
++	/**
++	 * Active items in the non-periodic schedule. This is a list of
++	 * Queue Heads. Transfers associated with these Queue Heads are
++	 * currently assigned to a host channel.
++	 */
++	struct list_head 	non_periodic_sched_active;
++
++	/**
++	 * Pointer to the next Queue Head to process in the active
++	 * non-periodic schedule.
++	 */
++	struct list_head 	*non_periodic_qh_ptr;
++
++	/**
++	 * Inactive items in the periodic schedule. This is a list of QHs for
++	 * periodic transfers that are _not_ scheduled for the next frame.
++	 * Each QH in the list has an interval counter that determines when it
++	 * needs to be scheduled for execution. This scheduling mechanism
++	 * allows only a simple calculation for periodic bandwidth used (i.e.
++	 * must assume that all periodic transfers may need to execute in the
++	 * same frame). However, it greatly simplifies scheduling and should
++	 * be sufficient for the vast majority of OTG hosts, which need to
++	 * connect to a small number of peripherals at one time.
++	 *
++	 * Items move from this list to periodic_sched_ready when the QH
++	 * interval counter is 0 at SOF.
++	 */
++	struct list_head	periodic_sched_inactive;
++
++	/**
++	 * List of periodic QHs that are ready for execution in the next
++	 * frame, but have not yet been assigned to host channels.
++	 *
++	 * Items move from this list to periodic_sched_assigned as host
++	 * channels become available during the current frame.
++	 */
++	struct list_head	periodic_sched_ready;
++
++	/**
++	 * List of periodic QHs to be executed in the next frame that are
++	 * assigned to host channels.
++	 *
++	 * Items move from this list to periodic_sched_queued as the
++	 * transactions for the QH are queued to the DWC_otg controller.
++	 */
++	struct list_head	periodic_sched_assigned;
++
++	/**
++	 * List of periodic QHs that have been queued for execution.
++	 *
++	 * Items move from this list to either periodic_sched_inactive or
++	 * periodic_sched_ready when the channel associated with the transfer
++	 * is released. If the interval for the QH is 1, the item moves to
++	 * periodic_sched_ready because it must be rescheduled for the next
++	 * frame. Otherwise, the item moves to periodic_sched_inactive.
++	 */
++	struct list_head	periodic_sched_queued;
++
++	/**
++	 * Total bandwidth claimed so far for periodic transfers. This value
++	 * is in microseconds per (micro)frame. The assumption is that all
++	 * periodic transfers may occur in the same (micro)frame.
++	 */
++	uint16_t		periodic_usecs;
++
++	/**
++	 * Total bandwidth claimed so far for all periodic transfers
++	 * in a frame.
++	 * This will include a mixture of HS and FS transfers.
++	 * Units are microseconds per (micro)frame.
++	 * We have a budget per frame and have to schedule
++	 * transactions accordingly.
++	 * Watch out for the fact that things are actually scheduled for the
++	 * "next frame".
++	 */
++	uint16_t		frame_usecs[8];
++
++	/**
++	 * Frame number read from the core at SOF. The value ranges from 0 to
++	 * DWC_HFNUM_MAX_FRNUM.
++	 */
++	uint16_t		frame_number;
++
++	/**
++	 * Free host channels in the controller. This is a list of
++	 * dwc_hc_t items.
++	 */
++	struct list_head 	free_hc_list;
++
++	/**
++	 * Number of available host channels.
++	 */
++	int			available_host_channels;
++
++	/**
++	 * Array of pointers to the host channel descriptors. Allows accessing
++	 * a host channel descriptor given the host channel number. This is
++	 * useful in interrupt handlers.
++	 */
++	dwc_hc_t		*hc_ptr_array[MAX_EPS_CHANNELS];
++
++	/**
++	 * Buffer to use for any data received during the status phase of a
++	 * control transfer. Normally no data is transferred during the status
++	 * phase. This buffer is used as a bit bucket. 
++	 */
++	uint8_t			*status_buf;
++
++	/**
++	 * DMA address for status_buf.
++	 */
++	dma_addr_t		status_buf_dma;
++#define DWC_OTG_HCD_STATUS_BUF_SIZE 64	
++
++	/**
++	 * Structure to allow starting the HCD in a non-interrupt context
++	 * during an OTG role change.
++	 */
++	struct work_struct	start_work;
++	struct usb_hcd		*_p;
++
++	/**
++	 * Connection timer. An OTG host must display a message if the device
++	 * does not connect. Started when the VBus power is turned on via
++	 * sysfs attribute "buspower".
++	 */
++        struct timer_list 	conn_timer;
++
++	/* Tasket to do a reset */
++	struct tasklet_struct   *reset_tasklet;
++
++#ifdef DEBUG
++	uint32_t 		frrem_samples;
++	uint64_t 		frrem_accum;
++
++	uint32_t		hfnum_7_samples_a;
++	uint64_t		hfnum_7_frrem_accum_a;
++	uint32_t		hfnum_0_samples_a;
++	uint64_t		hfnum_0_frrem_accum_a;
++	uint32_t		hfnum_other_samples_a;
++	uint64_t		hfnum_other_frrem_accum_a;
++
++	uint32_t		hfnum_7_samples_b;
++	uint64_t		hfnum_7_frrem_accum_b;
++	uint32_t		hfnum_0_samples_b;
++	uint64_t		hfnum_0_frrem_accum_b;
++	uint32_t		hfnum_other_samples_b;
++	uint64_t		hfnum_other_frrem_accum_b;
++#endif
++
++} dwc_otg_hcd_t;
++
++/** Gets the dwc_otg_hcd from a struct usb_hcd */
++static inline dwc_otg_hcd_t *hcd_to_dwc_otg_hcd(struct usb_hcd *hcd)
++{
++	return (dwc_otg_hcd_t *)(hcd->hcd_priv);
++}
++
++/** Gets the struct usb_hcd that contains a dwc_otg_hcd_t. */
++static inline struct usb_hcd *dwc_otg_hcd_to_hcd(dwc_otg_hcd_t *dwc_otg_hcd)
++{
++	return container_of((void *)dwc_otg_hcd, struct usb_hcd, hcd_priv);
++}
++
++/** @name HCD Create/Destroy Functions */
++/** @{ */
++extern int  __devinit dwc_otg_hcd_init(struct device *_dev, dwc_otg_device_t * dwc_otg_device);
++extern void dwc_otg_hcd_remove(struct device *_dev);
++/** @} */
++
++/** @name Linux HC Driver API Functions */
++/** @{ */
++
++extern int dwc_otg_hcd_start(struct usb_hcd *hcd);
++extern void dwc_otg_hcd_stop(struct usb_hcd *hcd);
++extern int dwc_otg_hcd_get_frame_number(struct usb_hcd *hcd);
++extern void dwc_otg_hcd_free(struct usb_hcd *hcd);
++
++extern int dwc_otg_hcd_urb_enqueue(struct usb_hcd *hcd, 
++				   struct urb *urb, 
++				   gfp_t mem_flags);
++extern int dwc_otg_hcd_urb_dequeue(struct usb_hcd *hcd, 
++				   struct urb *urb,
++				   int status);
++extern irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd);
++
++extern void dwc_otg_hcd_endpoint_disable(struct usb_hcd *hcd,
++					 struct usb_host_endpoint *ep);
++
++extern int dwc_otg_hcd_hub_status_data(struct usb_hcd *hcd, 
++				       char *buf);
++extern int dwc_otg_hcd_hub_control(struct usb_hcd *hcd, 
++				   u16 typeReq, 
++				   u16 wValue, 
++				   u16 wIndex, 
++				   char *buf, 
++				   u16 wLength);
++
++/** @} */
++
++/** @name Transaction Execution Functions */
++/** @{ */
++extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *_hcd);
++extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *_hcd,
++					   dwc_otg_transaction_type_e _tr_type);
++extern void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t *_hcd, struct urb *_urb,
++				     int _status);
++/** @} */
++
++/** @name Interrupt Handler Functions */
++/** @{ */
++extern int32_t dwc_otg_hcd_handle_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_sof_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_port_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_disconnect_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_hc_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_hc_n_intr (dwc_otg_hcd_t *_dwc_otg_hcd, uint32_t _num);
++extern int32_t dwc_otg_hcd_handle_session_req_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++/** @} */
++
++
++/** @name Schedule Queue Functions */
++/** @{ */
++
++/* Implemented in dwc_otg_hcd_queue.c */
++extern dwc_otg_qh_t *dwc_otg_hcd_qh_create (dwc_otg_hcd_t *_hcd, struct urb *_urb);
++extern void dwc_otg_hcd_qh_init (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, struct urb *_urb);
++extern void dwc_otg_hcd_qh_free (dwc_otg_qh_t *_qh);
++extern int dwc_otg_hcd_qh_add (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh);
++extern void dwc_otg_hcd_qh_remove (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh);
++extern void dwc_otg_hcd_qh_deactivate (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, int sched_csplit);
++extern int dwc_otg_hcd_qh_deferr (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, int delay);
++
++/** Remove and free a QH */
++static inline void dwc_otg_hcd_qh_remove_and_free (dwc_otg_hcd_t *_hcd,
++						   dwc_otg_qh_t *_qh)
++{
++	dwc_otg_hcd_qh_remove (_hcd, _qh);
++	dwc_otg_hcd_qh_free (_qh);
++}
++
++/** Allocates memory for a QH structure.
++ * @return Returns the memory allocate or NULL on error. */
++static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc (void)
++{
++#ifdef _SC_BUILD_ 
++    return (dwc_otg_qh_t *) kmalloc (sizeof(dwc_otg_qh_t), GFP_ATOMIC);
++#else
++	return (dwc_otg_qh_t *) kmalloc (sizeof(dwc_otg_qh_t), GFP_KERNEL);
++#endif	
++}
++
++extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create (struct urb *urb);
++extern void dwc_otg_hcd_qtd_init (dwc_otg_qtd_t *qtd, struct urb *urb);
++extern int dwc_otg_hcd_qtd_add (dwc_otg_qtd_t *qtd, dwc_otg_hcd_t *dwc_otg_hcd);
++
++/** Allocates memory for a QTD structure.
++ * @return Returns the memory allocate or NULL on error. */
++static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc (void)
++{
++#ifdef _SC_BUILD_    
++    return (dwc_otg_qtd_t *) kmalloc (sizeof(dwc_otg_qtd_t), GFP_ATOMIC);
++#else
++	return (dwc_otg_qtd_t *) kmalloc (sizeof(dwc_otg_qtd_t), GFP_KERNEL);
++#endif	
++}
++
++/** Frees the memory for a QTD structure.  QTD should already be removed from
++ * list.
++ * @param[in] _qtd QTD to free.*/
++static inline void dwc_otg_hcd_qtd_free (dwc_otg_qtd_t *_qtd)
++{
++	kfree (_qtd);
++}
++
++/** Removes a QTD from list.
++ * @param[in] _qtd QTD to remove from list. */
++static inline void dwc_otg_hcd_qtd_remove (dwc_otg_qtd_t *_qtd)
++{
++	unsigned long flags;
++	local_irq_save (flags);
++	list_del (&_qtd->qtd_list_entry);
++	local_irq_restore (flags);
++}
++
++/** Remove and free a QTD */
++static inline void dwc_otg_hcd_qtd_remove_and_free (dwc_otg_qtd_t *_qtd)
++{
++	dwc_otg_hcd_qtd_remove (_qtd);
++	dwc_otg_hcd_qtd_free (_qtd);
++}
++
++/** @} */
++
++
++/** @name Internal Functions */
++/** @{ */
++dwc_otg_qh_t *dwc_urb_to_qh(struct urb *_urb);
++void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *_hcd);
++void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *_hcd);
++/** @} */
++
++
++/** Gets the usb_host_endpoint associated with an URB. */
++static inline struct usb_host_endpoint *dwc_urb_to_endpoint(struct urb *_urb)
++{
++	struct usb_device *dev = _urb->dev;
++	int ep_num = usb_pipeendpoint(_urb->pipe);
++    if (usb_pipein(_urb->pipe))
++        return dev->ep_in[ep_num];
++    else
++        return dev->ep_out[ep_num];
++}
++
++/**
++ * Gets the endpoint number from a _bEndpointAddress argument. The endpoint is
++ * qualified with its direction (possible 32 endpoints per device).
++ */
++#define dwc_ep_addr_to_endpoint(_bEndpointAddress_) \
++	((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \
++                                                     ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4)
++
++/** Gets the QH that contains the list_head */
++#define dwc_list_to_qh(_list_head_ptr_) (container_of(_list_head_ptr_,dwc_otg_qh_t,qh_list_entry))
++
++/** Gets the QTD that contains the list_head */
++#define dwc_list_to_qtd(_list_head_ptr_) (container_of(_list_head_ptr_,dwc_otg_qtd_t,qtd_list_entry))
++
++/** Check if QH is non-periodic  */
++#define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == USB_ENDPOINT_XFER_BULK) || \
++                                     (_qh_ptr_->ep_type == USB_ENDPOINT_XFER_CONTROL))
++
++/** High bandwidth multiplier as encoded in highspeed endpoint descriptors */
++#define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
++
++/** Packet size for any kind of endpoint descriptor */
++#define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
++
++/**
++ * Returns true if _frame1 is less than or equal to _frame2. The comparison is
++ * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the
++ * frame number when the max frame number is reached.
++ */
++static inline int dwc_frame_num_le(uint16_t _frame1, uint16_t _frame2)
++{
++	return ((_frame2 - _frame1) & DWC_HFNUM_MAX_FRNUM) <=
++		(DWC_HFNUM_MAX_FRNUM >> 1);
++}
++
++/**
++ * Returns true if _frame1 is greater than _frame2. The comparison is done
++ * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the frame
++ * number when the max frame number is reached.
++ */
++static inline int dwc_frame_num_gt(uint16_t _frame1, uint16_t _frame2)
++{
++	return (_frame1 != _frame2) &&
++		(((_frame1 - _frame2) & DWC_HFNUM_MAX_FRNUM) <
++		 (DWC_HFNUM_MAX_FRNUM >> 1));
++}
++
++/**
++ * Increments _frame by the amount specified by _inc. The addition is done
++ * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value.
++ */
++static inline uint16_t dwc_frame_num_inc(uint16_t _frame, uint16_t _inc)
++{
++	return (_frame + _inc) & DWC_HFNUM_MAX_FRNUM;
++}
++
++static inline uint16_t dwc_full_frame_num (uint16_t _frame)
++{
++	return ((_frame) & DWC_HFNUM_MAX_FRNUM) >> 3;
++}
++
++static inline uint16_t dwc_micro_frame_num (uint16_t _frame)
++{
++	return (_frame) & 0x7;
++}
++
++#ifdef DEBUG
++/**
++ * Macro to sample the remaining PHY clocks left in the current frame. This
++ * may be used during debugging to determine the average time it takes to
++ * execute sections of code. There are two possible sample points, "a" and
++ * "b", so the _letter argument must be one of these values.
++ *
++ * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For
++ * example, "cat /sys/devices/lm0/hcd_frrem".
++ */
++#define dwc_sample_frrem(_hcd, _qh, _letter) \
++{ \
++	hfnum_data_t hfnum; \
++	dwc_otg_qtd_t *qtd; \
++	qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); \
++	if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_frame != 0 && !qtd->complete_split) { \
++		hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum); \
++		switch (hfnum.b.frnum & 0x7) { \
++		case 7: \
++			_hcd->hfnum_7_samples_##_letter++; \
++			_hcd->hfnum_7_frrem_accum_##_letter += hfnum.b.frrem; \
++			break; \
++		case 0: \
++			_hcd->hfnum_0_samples_##_letter++; \
++			_hcd->hfnum_0_frrem_accum_##_letter += hfnum.b.frrem; \
++			break; \
++		default: \
++			_hcd->hfnum_other_samples_##_letter++; \
++			_hcd->hfnum_other_frrem_accum_##_letter += hfnum.b.frrem; \
++			break; \
++		} \
++	} \
++}
++#else // DEBUG
++#define dwc_sample_frrem(_hcd, _qh, _letter) 
++#endif // DEBUG		
++#endif // __DWC_HCD_H__
++#endif /* DWC_DEVICE_ONLY */
+diff --git a/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c b/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
+new file mode 100644
+index 0000000..834b5e0
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
+@@ -0,0 +1,1841 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd_intr.c $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 553126 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++#include "dwc_otg_driver.h"
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_regs.h"
++
++const int erratum_usb09_patched = 0;
++const int deferral_on = 1;
++const int nak_deferral_delay = 8;
++const int nyet_deferral_delay = 1;
++/** @file 
++ * This file contains the implementation of the HCD Interrupt handlers. 
++ */
++
++/** This function handles interrupts for the HCD. */
++int32_t dwc_otg_hcd_handle_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
++{
++	int retval = 0;
++
++        dwc_otg_core_if_t *core_if = _dwc_otg_hcd->core_if;
++        gintsts_data_t gintsts;
++#ifdef DEBUG
++        dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++#endif
++
++	/* Check if HOST Mode */
++        if (dwc_otg_is_host_mode(core_if)) {
++		gintsts.d32 = dwc_otg_read_core_intr(core_if);
++		if (!gintsts.d32) {
++			return 0;
++		}
++
++#ifdef DEBUG
++		/* Don't print debug message in the interrupt handler on SOF */
++#  ifndef DEBUG_SOF
++		if (gintsts.d32 != DWC_SOF_INTR_MASK)
++#  endif
++			DWC_DEBUGPL (DBG_HCD, "\n");
++#endif
++
++#ifdef DEBUG
++#  ifndef DEBUG_SOF
++		if (gintsts.d32 != DWC_SOF_INTR_MASK)
++#  endif
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x\n", gintsts.d32);
++#endif
++
++                if (gintsts.b.sofintr) {
++			retval |= dwc_otg_hcd_handle_sof_intr (_dwc_otg_hcd);
++                }
++                if (gintsts.b.rxstsqlvl) {
++			retval |= dwc_otg_hcd_handle_rx_status_q_level_intr (_dwc_otg_hcd);
++                }
++                if (gintsts.b.nptxfempty) {
++			retval |= dwc_otg_hcd_handle_np_tx_fifo_empty_intr (_dwc_otg_hcd);
++		}
++                if (gintsts.b.i2cintr) {
++			/** @todo Implement i2cintr handler. */
++                }
++		if (gintsts.b.portintr) {
++			retval |= dwc_otg_hcd_handle_port_intr (_dwc_otg_hcd);
++		}
++		if (gintsts.b.hcintr) {
++			retval |= dwc_otg_hcd_handle_hc_intr (_dwc_otg_hcd);
++		}
++		if (gintsts.b.ptxfempty) {
++			retval |= dwc_otg_hcd_handle_perio_tx_fifo_empty_intr (_dwc_otg_hcd);
++		}
++#ifdef DEBUG
++#  ifndef DEBUG_SOF
++		if (gintsts.d32 != DWC_SOF_INTR_MASK)
++#  endif
++		{
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Finished Servicing Interrupts\n");
++			DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintsts=0x%08x\n",
++				    dwc_read_reg32(&global_regs->gintsts));
++			DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintmsk=0x%08x\n",
++				    dwc_read_reg32(&global_regs->gintmsk));                
++		}
++#endif
++
++#ifdef DEBUG
++#  ifndef DEBUG_SOF
++	if (gintsts.d32 != DWC_SOF_INTR_MASK)
++#  endif
++		DWC_DEBUGPL (DBG_HCD, "\n");
++#endif
++
++	}
++
++	return retval;
++}
++
++#ifdef DWC_TRACK_MISSED_SOFS
++#warning Compiling code to track missed SOFs
++#define FRAME_NUM_ARRAY_SIZE 1000
++/**
++ * This function is for debug only.
++ */
++static inline void track_missed_sofs(uint16_t _curr_frame_number) {
++	static uint16_t		frame_num_array[FRAME_NUM_ARRAY_SIZE];
++	static uint16_t		last_frame_num_array[FRAME_NUM_ARRAY_SIZE];
++	static int		frame_num_idx = 0;
++	static uint16_t		last_frame_num = DWC_HFNUM_MAX_FRNUM;
++	static int		dumped_frame_num_array = 0;
++	
++	if (frame_num_idx < FRAME_NUM_ARRAY_SIZE) {
++		if ((((last_frame_num + 1) & DWC_HFNUM_MAX_FRNUM) != _curr_frame_number)) {
++			frame_num_array[frame_num_idx] = _curr_frame_number;
++			last_frame_num_array[frame_num_idx++] = last_frame_num;
++		}
++	} else if (!dumped_frame_num_array) {
++		int i;
++		printk(KERN_EMERG USB_DWC "Frame     Last Frame\n");
++		printk(KERN_EMERG USB_DWC "-----     ----------\n");
++		for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) {
++			printk(KERN_EMERG USB_DWC "0x%04x    0x%04x\n",
++			       frame_num_array[i], last_frame_num_array[i]);
++		}
++		dumped_frame_num_array = 1;
++	}
++	last_frame_num = _curr_frame_number;
++}
++#endif	
++
++/**
++ * Handles the start-of-frame interrupt in host mode. Non-periodic
++ * transactions may be queued to the DWC_otg controller for the current
++ * (micro)frame. Periodic transactions may be queued to the controller for the
++ * next (micro)frame.
++ */
++int32_t dwc_otg_hcd_handle_sof_intr (dwc_otg_hcd_t *_hcd)
++{
++	hfnum_data_t		hfnum;
++	struct list_head 	*qh_entry;
++	dwc_otg_qh_t 		*qh;
++	dwc_otg_transaction_type_e tr_type;
++	gintsts_data_t gintsts = {.d32 = 0};
++
++	hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum);
++
++#ifdef DEBUG_SOF
++	DWC_DEBUGPL(DBG_HCD, "--Start of Frame Interrupt--\n");
++#endif
++
++	_hcd->frame_number = hfnum.b.frnum;
++
++#ifdef DEBUG
++	_hcd->frrem_accum += hfnum.b.frrem;
++	_hcd->frrem_samples++;
++#endif
++
++#ifdef DWC_TRACK_MISSED_SOFS
++	track_missed_sofs(_hcd->frame_number);
++#endif	
++
++	/* Determine whether any periodic QHs should be executed. */
++	qh_entry = _hcd->periodic_sched_inactive.next;
++	while (qh_entry != &_hcd->periodic_sched_inactive) {
++		qh = list_entry(qh_entry, dwc_otg_qh_t, qh_list_entry);
++		qh_entry = qh_entry->next;
++		if (dwc_frame_num_le(qh->sched_frame, _hcd->frame_number)) {
++			/* 
++			 * Move QH to the ready list to be executed next
++			 * (micro)frame.
++			 */
++			list_move(&qh->qh_list_entry, &_hcd->periodic_sched_ready);
++		}
++	}
++
++	tr_type = dwc_otg_hcd_select_transactions(_hcd);
++	if (tr_type != DWC_OTG_TRANSACTION_NONE) {
++		dwc_otg_hcd_queue_transactions(_hcd, tr_type);
++	}
++
++	/* Clear interrupt */
++	gintsts.b.sofintr = 1;
++	dwc_write_reg32(&_hcd->core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/** Handles the Rx Status Queue Level Interrupt, which indicates that there is at
++ * least one packet in the Rx FIFO.  The packets are moved from the FIFO to
++ * memory if the DWC_otg controller is operating in Slave mode. */
++int32_t dwc_otg_hcd_handle_rx_status_q_level_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
++{
++	host_grxsts_data_t grxsts;
++	dwc_hc_t *hc = NULL;
++
++	DWC_DEBUGPL(DBG_HCD, "--RxStsQ Level Interrupt--\n");
++
++	grxsts.d32 = dwc_read_reg32(&_dwc_otg_hcd->core_if->core_global_regs->grxstsp);
++
++	hc = _dwc_otg_hcd->hc_ptr_array[grxsts.b.chnum];
++
++	/* Packet Status */
++	DWC_DEBUGPL(DBG_HCDV, "    Ch num = %d\n", grxsts.b.chnum);
++	DWC_DEBUGPL(DBG_HCDV, "    Count = %d\n", grxsts.b.bcnt);
++	DWC_DEBUGPL(DBG_HCDV, "    DPID = %d, hc.dpid = %d\n", grxsts.b.dpid, hc->data_pid_start);
++	DWC_DEBUGPL(DBG_HCDV, "    PStatus = %d\n", grxsts.b.pktsts);
++	
++	switch (grxsts.b.pktsts) {
++	case DWC_GRXSTS_PKTSTS_IN:
++		/* Read the data into the host buffer. */
++		if (grxsts.b.bcnt > 0) {
++			dwc_otg_read_packet(_dwc_otg_hcd->core_if, 
++					    hc->xfer_buff, 
++					    grxsts.b.bcnt);
++
++			/* Update the HC fields for the next packet received. */
++			hc->xfer_count += grxsts.b.bcnt;
++			hc->xfer_buff += grxsts.b.bcnt;
++		}
++		
++	case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
++	case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR:
++	case DWC_GRXSTS_PKTSTS_CH_HALTED:
++		/* Handled in interrupt, just ignore data */
++		break;
++	default:
++		DWC_ERROR ("RX_STS_Q Interrupt: Unknown status %d\n", grxsts.b.pktsts);
++		break;
++	}
++	
++	return 1;
++}
++
++/** This interrupt occurs when the non-periodic Tx FIFO is half-empty. More
++ * data packets may be written to the FIFO for OUT transfers. More requests
++ * may be written to the non-periodic request queue for IN transfers. This
++ * interrupt is enabled only in Slave mode. */
++int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Non-Periodic TxFIFO Empty Interrupt--\n");
++	dwc_otg_hcd_queue_transactions(_dwc_otg_hcd,
++				       DWC_OTG_TRANSACTION_NON_PERIODIC);
++	return 1;
++}
++
++/** This interrupt occurs when the periodic Tx FIFO is half-empty. More data
++ * packets may be written to the FIFO for OUT transfers. More requests may be
++ * written to the periodic request queue for IN transfers. This interrupt is
++ * enabled only in Slave mode. */
++int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Periodic TxFIFO Empty Interrupt--\n");	
++	dwc_otg_hcd_queue_transactions(_dwc_otg_hcd,
++				       DWC_OTG_TRANSACTION_PERIODIC);
++	return 1;
++}
++
++/** There are multiple conditions that can cause a port interrupt. This function
++ * determines which interrupt conditions have occurred and handles them
++ * appropriately. */
++int32_t dwc_otg_hcd_handle_port_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
++{
++	int retval = 0;
++	hprt0_data_t hprt0;
++	hprt0_data_t hprt0_modify;
++
++	hprt0.d32 = dwc_read_reg32(_dwc_otg_hcd->core_if->host_if->hprt0);
++	hprt0_modify.d32 = dwc_read_reg32(_dwc_otg_hcd->core_if->host_if->hprt0);
++
++	/* Clear appropriate bits in HPRT0 to clear the interrupt bit in
++	 * GINTSTS */
++
++	hprt0_modify.b.prtena = 0;
++	hprt0_modify.b.prtconndet = 0; 
++	hprt0_modify.b.prtenchng = 0;
++	hprt0_modify.b.prtovrcurrchng = 0; 
++
++	/* Port Connect Detected 
++	 * Set flag and clear if detected */
++	if (hprt0.b.prtconndet) {
++		DWC_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x "
++			    "Port Connect Detected--\n", hprt0.d32);
++		_dwc_otg_hcd->flags.b.port_connect_status_change = 1;
++		_dwc_otg_hcd->flags.b.port_connect_status = 1;
++		hprt0_modify.b.prtconndet = 1;
++
++                /* B-Device has connected, Delete the connection timer.  */
++                del_timer( &_dwc_otg_hcd->conn_timer );
++
++		/* The Hub driver asserts a reset when it sees port connect
++		 * status change flag */
++		retval |= 1;
++	}
++
++	/* Port Enable Changed
++	 * Clear if detected - Set internal flag if disabled */
++	if (hprt0.b.prtenchng) {
++		DWC_DEBUGPL(DBG_HCD, "  --Port Interrupt HPRT0=0x%08x "
++			    "Port Enable Changed--\n", hprt0.d32);
++		hprt0_modify.b.prtenchng = 1;
++		if (hprt0.b.prtena == 1) {
++			int do_reset = 0;
++			dwc_otg_core_params_t *params = _dwc_otg_hcd->core_if->core_params;
++			dwc_otg_core_global_regs_t *global_regs = _dwc_otg_hcd->core_if->core_global_regs;
++			dwc_otg_host_if_t *host_if = _dwc_otg_hcd->core_if->host_if;
++
++			/* Check if we need to adjust the PHY clock speed for
++			 * low power and adjust it */
++			if (params->host_support_fs_ls_low_power)
++			{
++				gusbcfg_data_t usbcfg;
++
++				usbcfg.d32 = dwc_read_reg32 (&global_regs->gusbcfg);
++
++				if ((hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED) ||
++				    (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_FULL_SPEED))
++				{
++					/* 
++					 * Low power 
++					 */
++					hcfg_data_t hcfg;
++					if (usbcfg.b.phylpwrclksel == 0) {
++						/* Set PHY low power clock select for FS/LS devices */
++						usbcfg.b.phylpwrclksel = 1;
++						dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++						do_reset = 1;
++					}
++
++					hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg);
++
++					if ((hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED) && 
++					    (params->host_ls_low_power_phy_clk ==
++					     DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ))
++					{
++						/* 6 MHZ */
++						DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 6 MHz (Low Power)\n");
++						if (hcfg.b.fslspclksel != DWC_HCFG_6_MHZ) {
++							hcfg.b.fslspclksel = DWC_HCFG_6_MHZ;
++							dwc_write_reg32(&host_if->host_global_regs->hcfg,
++									hcfg.d32);
++							do_reset = 1;
++						}
++					}
++					else {
++						/* 48 MHZ */
++						DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 48 MHz ()\n");
++						if (hcfg.b.fslspclksel != DWC_HCFG_48_MHZ) {
++							hcfg.b.fslspclksel = DWC_HCFG_48_MHZ;
++							dwc_write_reg32(&host_if->host_global_regs->hcfg,
++									hcfg.d32);
++							do_reset = 1;
++						}
++					}
++				}
++				else {
++					/* 
++					 * Not low power 
++					 */
++					if (usbcfg.b.phylpwrclksel == 1) {
++						usbcfg.b.phylpwrclksel = 0;
++						dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++						do_reset = 1;
++					}
++				}
++
++				if (do_reset) {
++					tasklet_schedule(_dwc_otg_hcd->reset_tasklet);
++				}
++			}
++			
++			if (!do_reset) {
++				/* Port has been enabled set the reset change flag */
++				_dwc_otg_hcd->flags.b.port_reset_change = 1;
++			}
++
++		} else {
++			_dwc_otg_hcd->flags.b.port_enable_change = 1;
++		}
++		retval |= 1;
++	}
++
++	/** Overcurrent Change Interrupt */
++	if (hprt0.b.prtovrcurrchng) {
++		DWC_DEBUGPL(DBG_HCD, "  --Port Interrupt HPRT0=0x%08x "
++			    "Port Overcurrent Changed--\n", hprt0.d32);
++		_dwc_otg_hcd->flags.b.port_over_current_change = 1;
++		hprt0_modify.b.prtovrcurrchng = 1; 
++		retval |= 1;
++	}
++
++	/* Clear Port Interrupts */
++	dwc_write_reg32(_dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32);
++
++	return retval;
++}
++
++
++/** This interrupt indicates that one or more host channels has a pending
++ * interrupt. There are multiple conditions that can cause each host channel
++ * interrupt. This function determines which conditions have occurred for each
++ * host channel interrupt and handles them appropriately. */
++int32_t dwc_otg_hcd_handle_hc_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
++{
++	int i;
++	int retval = 0;
++	haint_data_t haint;
++
++	/* Clear appropriate bits in HCINTn to clear the interrupt bit in
++	 * GINTSTS */
++
++	haint.d32 = dwc_otg_read_host_all_channels_intr(_dwc_otg_hcd->core_if);
++
++	for (i=0; i<_dwc_otg_hcd->core_if->core_params->host_channels; i++) {
++		if (haint.b2.chint & (1 << i)) {
++			retval |= dwc_otg_hcd_handle_hc_n_intr (_dwc_otg_hcd, i);
++		}
++	}
++
++	return retval;
++}
++
++/* Macro used to clear one channel interrupt */
++#define clear_hc_int(_hc_regs_,_intr_) \
++do { \
++	hcint_data_t hcint_clear = {.d32 = 0}; \
++	hcint_clear.b._intr_ = 1; \
++	dwc_write_reg32(&((_hc_regs_)->hcint), hcint_clear.d32); \
++} while (0)
++
++/*
++ * Macro used to disable one channel interrupt. Channel interrupts are
++ * disabled when the channel is halted or released by the interrupt handler.
++ * There is no need to handle further interrupts of that type until the
++ * channel is re-assigned. In fact, subsequent handling may cause crashes
++ * because the channel structures are cleaned up when the channel is released.
++ */
++#define disable_hc_int(_hc_regs_,_intr_) \
++do { \
++	hcintmsk_data_t hcintmsk = {.d32 = 0}; \
++	hcintmsk.b._intr_ = 1; \
++	dwc_modify_reg32(&((_hc_regs_)->hcintmsk), hcintmsk.d32, 0); \
++} while (0)
++
++/**
++ * Gets the actual length of a transfer after the transfer halts. _halt_status
++ * holds the reason for the halt.
++ *
++ * For IN transfers where _halt_status is DWC_OTG_HC_XFER_COMPLETE, 
++ * *_short_read is set to 1 upon return if less than the requested
++ * number of bytes were transferred. Otherwise, *_short_read is set to 0 upon
++ * return. _short_read may also be NULL on entry, in which case it remains
++ * unchanged.
++ */
++static uint32_t get_actual_xfer_length(dwc_hc_t *_hc,
++				       dwc_otg_hc_regs_t *_hc_regs,
++				       dwc_otg_qtd_t *_qtd,
++				       dwc_otg_halt_status_e _halt_status,
++				       int *_short_read)
++{
++	hctsiz_data_t 	hctsiz;
++	uint32_t 	length;
++
++	if (_short_read != NULL) {
++		*_short_read = 0;
++	}
++	hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
++
++	if (_halt_status == DWC_OTG_HC_XFER_COMPLETE) {
++		if (_hc->ep_is_in) {
++			length = _hc->xfer_len - hctsiz.b.xfersize;
++			if (_short_read != NULL) {
++				*_short_read = (hctsiz.b.xfersize != 0);
++			}
++		} else if (_hc->qh->do_split) {
++			length = _qtd->ssplit_out_xfer_count;
++		} else {
++			length = _hc->xfer_len;
++		}
++	} else {
++		/*
++		 * Must use the hctsiz.pktcnt field to determine how much data
++		 * has been transferred. This field reflects the number of
++		 * packets that have been transferred via the USB. This is
++		 * always an integral number of packets if the transfer was
++		 * halted before its normal completion. (Can't use the
++		 * hctsiz.xfersize field because that reflects the number of
++		 * bytes transferred via the AHB, not the USB).
++		 */
++		length = (_hc->start_pkt_count - hctsiz.b.pktcnt) * _hc->max_packet;
++	}
++
++	return length;
++}
++
++/**
++ * Updates the state of the URB after a Transfer Complete interrupt on the
++ * host channel. Updates the actual_length field of the URB based on the
++ * number of bytes transferred via the host channel. Sets the URB status
++ * if the data transfer is finished. 
++ *
++ * @return 1 if the data transfer specified by the URB is completely finished,
++ * 0 otherwise.
++ */
++static int update_urb_state_xfer_comp(dwc_hc_t *_hc,
++				      dwc_otg_hc_regs_t * _hc_regs, struct urb *_urb,
++				      dwc_otg_qtd_t * _qtd, int *status)
++{
++	int 		xfer_done = 0;
++	int 		short_read = 0;
++
++	_urb->actual_length += get_actual_xfer_length(_hc, _hc_regs, _qtd,
++						      DWC_OTG_HC_XFER_COMPLETE,
++						      &short_read);
++
++	if (short_read || (_urb->actual_length == _urb->transfer_buffer_length)) {
++		xfer_done = 1;
++		if (short_read && (_urb->transfer_flags & URB_SHORT_NOT_OK)) {
++			*status = -EREMOTEIO;
++		} else {
++			*status = 0;
++		}
++	}
++
++#ifdef DEBUG
++	{
++		hctsiz_data_t 	hctsiz;
++		hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
++		DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
++			    __func__, (_hc->ep_is_in ? "IN" : "OUT"), _hc->hc_num);
++		DWC_DEBUGPL(DBG_HCDV, "  hc->xfer_len %d\n", _hc->xfer_len);
++		DWC_DEBUGPL(DBG_HCDV, "  hctsiz.xfersize %d\n", hctsiz.b.xfersize);
++		DWC_DEBUGPL(DBG_HCDV, "  urb->transfer_buffer_length %d\n",
++			    _urb->transfer_buffer_length);
++		DWC_DEBUGPL(DBG_HCDV, "  urb->actual_length %d\n", _urb->actual_length);
++		DWC_DEBUGPL(DBG_HCDV, "  short_read %d, xfer_done %d\n",
++			    short_read, xfer_done);
++	}
++#endif
++
++	return xfer_done;
++}
++
++/*
++ * Save the starting data toggle for the next transfer. The data toggle is
++ * saved in the QH for non-control transfers and it's saved in the QTD for
++ * control transfers.
++ */
++static void save_data_toggle(dwc_hc_t *_hc,
++			     dwc_otg_hc_regs_t *_hc_regs,
++			     dwc_otg_qtd_t *_qtd)
++{
++	hctsiz_data_t hctsiz;
++	hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
++
++	if (_hc->ep_type != DWC_OTG_EP_TYPE_CONTROL) {
++		dwc_otg_qh_t *qh = _hc->qh;
++		if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
++			qh->data_toggle = DWC_OTG_HC_PID_DATA0;
++		} else {
++			qh->data_toggle = DWC_OTG_HC_PID_DATA1;
++		}
++	} else {
++		if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
++			_qtd->data_toggle = DWC_OTG_HC_PID_DATA0;
++		} else {
++			_qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
++		}
++	}
++}
++
++/**
++ * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic
++ * QHs, removes the QH from the active non-periodic schedule. If any QTDs are
++ * still linked to the QH, the QH is added to the end of the inactive
++ * non-periodic schedule. For periodic QHs, removes the QH from the periodic
++ * schedule if no more QTDs are linked to the QH.
++ */
++static void deactivate_qh(dwc_otg_hcd_t *_hcd,
++			  dwc_otg_qh_t *_qh,
++			  int free_qtd)
++{
++	int continue_split = 0;
++	dwc_otg_qtd_t *qtd;
++
++	DWC_DEBUGPL(DBG_HCDV, "  %s(%p,%p,%d)\n", __func__, _hcd, _qh, free_qtd);
++
++	qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
++
++	if (qtd->complete_split) {
++		continue_split = 1;
++	} 
++	else if ((qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_MID) ||
++		 (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_END))
++	{
++		continue_split = 1;
++	}
++
++	if (free_qtd) {
++		/*
++		 * Note that this was previously a call to
++		 * dwc_otg_hcd_qtd_remove_and_free(qtd), which frees the qtd.
++		 * However, that call frees the qtd memory, and we continue in the
++		 * interrupt logic to access it many more times, including writing
++		 * to it.  With slub debugging on, it is clear that we were writing
++		 * to memory we had freed.
++		 * Call this instead, and now I have moved the freeing of the memory to
++		 * the end of processing this interrupt.
++		 */
++		//dwc_otg_hcd_qtd_remove_and_free(qtd);
++		dwc_otg_hcd_qtd_remove(qtd);
++		
++		continue_split = 0;
++	}
++
++	_qh->channel = NULL;
++	_qh->qtd_in_process = NULL;
++	dwc_otg_hcd_qh_deactivate(_hcd, _qh, continue_split);
++}
++
++/**
++ * Updates the state of an Isochronous URB when the transfer is stopped for
++ * any reason. The fields of the current entry in the frame descriptor array
++ * are set based on the transfer state and the input _halt_status. Completes
++ * the Isochronous URB if all the URB frames have been completed.
++ *
++ * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames remaining to be
++ * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_URB_COMPLETE.
++ */
++static dwc_otg_halt_status_e
++update_isoc_urb_state(dwc_otg_hcd_t *_hcd,
++		      dwc_hc_t *_hc,
++		      dwc_otg_hc_regs_t *_hc_regs,
++		      dwc_otg_qtd_t *_qtd,
++		      dwc_otg_halt_status_e _halt_status)
++{
++	struct urb *urb = _qtd->urb;
++	dwc_otg_halt_status_e ret_val = _halt_status;
++	struct usb_iso_packet_descriptor *frame_desc;
++
++	frame_desc = &urb->iso_frame_desc[_qtd->isoc_frame_index];
++	switch (_halt_status) {
++	case DWC_OTG_HC_XFER_COMPLETE:
++		frame_desc->status = 0;
++		frame_desc->actual_length =
++			get_actual_xfer_length(_hc, _hc_regs, _qtd,
++					       _halt_status, NULL);
++		break;
++	case DWC_OTG_HC_XFER_FRAME_OVERRUN:
++		urb->error_count++;
++		if (_hc->ep_is_in) {
++			frame_desc->status = -ENOSR;
++		} else {
++			frame_desc->status = -ECOMM;
++		}
++		frame_desc->actual_length = 0;
++		break;
++	case DWC_OTG_HC_XFER_BABBLE_ERR:
++		urb->error_count++;
++		frame_desc->status = -EOVERFLOW;
++		/* Don't need to update actual_length in this case. */
++		break;
++	case DWC_OTG_HC_XFER_XACT_ERR:
++		urb->error_count++;
++		frame_desc->status = -EPROTO;
++		frame_desc->actual_length =
++			get_actual_xfer_length(_hc, _hc_regs, _qtd,
++					       _halt_status, NULL);
++	default:
++		DWC_ERROR("%s: Unhandled _halt_status (%d)\n", __func__,
++			  _halt_status);
++		BUG();
++		break;
++	}
++
++	if (++_qtd->isoc_frame_index == urb->number_of_packets) {
++		/*
++		 * urb->status is not used for isoc transfers. 
++		 * The individual frame_desc statuses are used instead.
++		 */
++		dwc_otg_hcd_complete_urb(_hcd, urb, 0);
++		ret_val = DWC_OTG_HC_XFER_URB_COMPLETE;
++	} else {
++		ret_val = DWC_OTG_HC_XFER_COMPLETE;
++	}
++
++	return ret_val;
++}
++
++/**
++ * Releases a host channel for use by other transfers. Attempts to select and
++ * queue more transactions since at least one host channel is available.
++ *
++ * @param _hcd The HCD state structure.
++ * @param _hc The host channel to release.
++ * @param _qtd The QTD associated with the host channel. This QTD may be freed
++ * if the transfer is complete or an error has occurred.
++ * @param _halt_status Reason the channel is being released. This status
++ * determines the actions taken by this function.
++ */
++static void release_channel(dwc_otg_hcd_t *_hcd,
++			    dwc_hc_t *_hc,
++			    dwc_otg_qtd_t *_qtd,
++			    dwc_otg_halt_status_e _halt_status,
++				int *must_free)
++{
++	dwc_otg_transaction_type_e tr_type;
++	int free_qtd;
++	dwc_otg_qh_t * _qh;
++	int deact = 1;
++	int retry_delay = 1;
++	unsigned long flags;
++
++	DWC_DEBUGPL(DBG_HCDV, "  %s: channel %d, halt_status %d\n", __func__,
++		      _hc->hc_num, _halt_status);
++
++	switch (_halt_status) {
++	case DWC_OTG_HC_XFER_NYET:
++	case DWC_OTG_HC_XFER_NAK:
++		if (_halt_status == DWC_OTG_HC_XFER_NYET) {
++			retry_delay = nyet_deferral_delay;
++		} else {
++			retry_delay = nak_deferral_delay;
++		}
++		free_qtd = 0;
++		if (deferral_on && _hc->do_split) {
++			_qh = _hc->qh;
++			if (_qh) {
++				deact = dwc_otg_hcd_qh_deferr(_hcd, _qh , retry_delay);
++			}
++		}
++	        break;
++	case DWC_OTG_HC_XFER_URB_COMPLETE:
++		free_qtd = 1;
++		break;
++	case DWC_OTG_HC_XFER_AHB_ERR:
++	case DWC_OTG_HC_XFER_STALL:
++	case DWC_OTG_HC_XFER_BABBLE_ERR:
++		free_qtd = 1;
++		break;
++	case DWC_OTG_HC_XFER_XACT_ERR:
++		if (_qtd->error_count >= 3) {
++			DWC_DEBUGPL(DBG_HCDV, "  Complete URB with transaction error\n");
++			free_qtd = 1;
++			//_qtd->urb->status = -EPROTO;
++			dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EPROTO);
++		} else {
++			free_qtd = 0;
++		}
++		break;
++	case DWC_OTG_HC_XFER_URB_DEQUEUE:
++		/*
++		 * The QTD has already been removed and the QH has been
++		 * deactivated. Don't want to do anything except release the
++		 * host channel and try to queue more transfers.
++		 */
++		goto cleanup;
++	case DWC_OTG_HC_XFER_NO_HALT_STATUS:
++		DWC_ERROR("%s: No halt_status, channel %d\n", __func__, _hc->hc_num);
++		free_qtd = 0;
++		break;
++	default:
++		free_qtd = 0;
++		break;
++	}
++	if (free_qtd) {
++		/* Only change must_free to true (do not set to zero here -- it is
++		 * pre-initialized to zero).
++		 */
++		*must_free = 1;
++	}
++	if (deact) {
++	deactivate_qh(_hcd, _hc->qh, free_qtd);
++	}
++ cleanup:
++	/*
++	 * Release the host channel for use by other transfers. The cleanup
++	 * function clears the channel interrupt enables and conditions, so
++	 * there's no need to clear the Channel Halted interrupt separately.
++	 */
++	dwc_otg_hc_cleanup(_hcd->core_if, _hc);
++	list_add_tail(&_hc->hc_list_entry, &_hcd->free_hc_list);
++
++	local_irq_save(flags);
++	_hcd->available_host_channels++;
++	local_irq_restore(flags);
++	/* Try to queue more transfers now that there's a free channel, */
++	/* unless erratum_usb09_patched is set */
++	if (!erratum_usb09_patched) {
++	tr_type = dwc_otg_hcd_select_transactions(_hcd);
++	if (tr_type != DWC_OTG_TRANSACTION_NONE) {
++		dwc_otg_hcd_queue_transactions(_hcd, tr_type);
++		}
++	}
++}
++
++/**
++ * Halts a host channel. If the channel cannot be halted immediately because
++ * the request queue is full, this function ensures that the FIFO empty
++ * interrupt for the appropriate queue is enabled so that the halt request can
++ * be queued when there is space in the request queue.
++ *
++ * This function may also be called in DMA mode. In that case, the channel is
++ * simply released since the core always halts the channel automatically in
++ * DMA mode.
++ */
++static void halt_channel(dwc_otg_hcd_t *_hcd,
++			 dwc_hc_t *_hc,
++			 dwc_otg_qtd_t *_qtd,
++			 dwc_otg_halt_status_e _halt_status, int *must_free)
++{
++	if (_hcd->core_if->dma_enable) {
++		release_channel(_hcd, _hc, _qtd, _halt_status, must_free);
++		return;
++	}
++
++	/* Slave mode processing... */
++	dwc_otg_hc_halt(_hcd->core_if, _hc, _halt_status);
++
++	if (_hc->halt_on_queue) {
++		gintmsk_data_t gintmsk = {.d32 = 0};
++		dwc_otg_core_global_regs_t *global_regs;
++		global_regs = _hcd->core_if->core_global_regs;
++
++		if (_hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
++		    _hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
++			/*
++			 * Make sure the Non-periodic Tx FIFO empty interrupt
++			 * is enabled so that the non-periodic schedule will
++			 * be processed.
++			 */
++			gintmsk.b.nptxfempty = 1;
++			dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32);
++		} else {
++			/*
++			 * Move the QH from the periodic queued schedule to
++			 * the periodic assigned schedule. This allows the
++			 * halt to be queued when the periodic schedule is
++			 * processed.
++			 */
++			list_move(&_hc->qh->qh_list_entry,
++				  &_hcd->periodic_sched_assigned);
++
++			/*
++			 * Make sure the Periodic Tx FIFO Empty interrupt is
++			 * enabled so that the periodic schedule will be
++			 * processed.
++			 */
++			gintmsk.b.ptxfempty = 1;
++			dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32);
++		}
++	}
++}
++
++/**
++ * Performs common cleanup for non-periodic transfers after a Transfer
++ * Complete interrupt. This function should be called after any endpoint type
++ * specific handling is finished to release the host channel.
++ */
++static void complete_non_periodic_xfer(dwc_otg_hcd_t *_hcd,
++				       dwc_hc_t *_hc,
++				       dwc_otg_hc_regs_t *_hc_regs,
++				       dwc_otg_qtd_t *_qtd,
++				       dwc_otg_halt_status_e _halt_status, int *must_free)
++{
++	hcint_data_t hcint;
++
++	_qtd->error_count = 0;
++
++	hcint.d32 = dwc_read_reg32(&_hc_regs->hcint);
++	if (hcint.b.nyet) {
++		/*
++		 * Got a NYET on the last transaction of the transfer. This
++		 * means that the endpoint should be in the PING state at the
++		 * beginning of the next transfer.
++		 */
++		_hc->qh->ping_state = 1;
++		clear_hc_int(_hc_regs,nyet);
++	}
++
++	/*
++	 * Always halt and release the host channel to make it available for
++	 * more transfers. There may still be more phases for a control
++	 * transfer or more data packets for a bulk transfer at this point,
++	 * but the host channel is still halted. A channel will be reassigned
++	 * to the transfer when the non-periodic schedule is processed after
++	 * the channel is released. This allows transactions to be queued
++	 * properly via dwc_otg_hcd_queue_transactions, which also enables the
++	 * Tx FIFO Empty interrupt if necessary.
++	 */
++	if (_hc->ep_is_in) {
++		/*
++		 * IN transfers in Slave mode require an explicit disable to
++		 * halt the channel. (In DMA mode, this call simply releases
++		 * the channel.)
++		 */
++	    halt_channel(_hcd, _hc, _qtd, _halt_status, must_free);
++	} else {
++		/*
++		 * The channel is automatically disabled by the core for OUT
++		 * transfers in Slave mode.
++		 */
++	    release_channel(_hcd, _hc, _qtd, _halt_status, must_free);
++	}
++}
++
++/**
++ * Performs common cleanup for periodic transfers after a Transfer Complete
++ * interrupt. This function should be called after any endpoint type specific
++ * handling is finished to release the host channel.
++ */
++static void complete_periodic_xfer(dwc_otg_hcd_t *_hcd,
++				   dwc_hc_t *_hc,
++				   dwc_otg_hc_regs_t *_hc_regs,
++				   dwc_otg_qtd_t *_qtd,
++				   dwc_otg_halt_status_e _halt_status, int *must_free)
++{
++	hctsiz_data_t hctsiz;
++	_qtd->error_count = 0;
++		
++	hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
++	if (!_hc->ep_is_in || hctsiz.b.pktcnt == 0) {
++		/* Core halts channel in these cases. */
++	    release_channel(_hcd, _hc, _qtd, _halt_status, must_free);
++	} else {
++		/* Flush any outstanding requests from the Tx queue. */
++	    halt_channel(_hcd, _hc, _qtd, _halt_status, must_free);
++	}
++}
++
++/**
++ * Handles a host channel Transfer Complete interrupt. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t *_hcd,
++				       dwc_hc_t *_hc,
++				       dwc_otg_hc_regs_t *_hc_regs,
++				       dwc_otg_qtd_t *_qtd, int *must_free)
++{
++	int 			urb_xfer_done;
++	dwc_otg_halt_status_e 	halt_status = DWC_OTG_HC_XFER_COMPLETE;
++	struct urb 		*urb = _qtd->urb;
++	int 			pipe_type = usb_pipetype(urb->pipe);
++	int status = -EINPROGRESS;
++
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "Transfer Complete--\n", _hc->hc_num);
++
++     	/* 
++	 * Handle xfer complete on CSPLIT.
++	 */
++	if (_hc->qh->do_split) {
++		_qtd->complete_split = 0;
++	}
++
++	/* Update the QTD and URB states. */
++	switch (pipe_type) {
++	case PIPE_CONTROL:
++		switch (_qtd->control_phase) {
++		case DWC_OTG_CONTROL_SETUP:
++			if (urb->transfer_buffer_length > 0) {
++				_qtd->control_phase = DWC_OTG_CONTROL_DATA;
++			} else {
++				_qtd->control_phase = DWC_OTG_CONTROL_STATUS;
++			}
++			DWC_DEBUGPL(DBG_HCDV, "  Control setup transaction done\n");
++			halt_status = DWC_OTG_HC_XFER_COMPLETE;
++			break;
++		case DWC_OTG_CONTROL_DATA: {
++			urb_xfer_done = update_urb_state_xfer_comp(_hc, _hc_regs,urb, _qtd, &status);
++			if (urb_xfer_done) {
++				_qtd->control_phase = DWC_OTG_CONTROL_STATUS;
++				DWC_DEBUGPL(DBG_HCDV, "  Control data transfer done\n");
++			} else {
++				save_data_toggle(_hc, _hc_regs, _qtd);
++			}
++			halt_status = DWC_OTG_HC_XFER_COMPLETE;
++			break;
++		}
++		case DWC_OTG_CONTROL_STATUS:
++			DWC_DEBUGPL(DBG_HCDV, "  Control transfer complete\n");
++			if (status == -EINPROGRESS) {
++				status = 0;
++			}
++			dwc_otg_hcd_complete_urb(_hcd, urb, status);
++			halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
++			break;
++		}
++
++		complete_non_periodic_xfer(_hcd, _hc, _hc_regs, _qtd,
++					     halt_status, must_free);
++		break;
++	case PIPE_BULK:
++		DWC_DEBUGPL(DBG_HCDV, "  Bulk transfer complete\n");
++		urb_xfer_done = update_urb_state_xfer_comp(_hc, _hc_regs, urb, _qtd, &status);
++		if (urb_xfer_done) {
++			dwc_otg_hcd_complete_urb(_hcd, urb, status);
++			halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
++		} else {
++			halt_status = DWC_OTG_HC_XFER_COMPLETE;
++		}
++			
++		save_data_toggle(_hc, _hc_regs, _qtd);
++		complete_non_periodic_xfer(_hcd, _hc, _hc_regs, _qtd,halt_status, must_free);
++		break;
++	case PIPE_INTERRUPT:
++		DWC_DEBUGPL(DBG_HCDV, "  Interrupt transfer complete\n");
++		update_urb_state_xfer_comp(_hc, _hc_regs, urb, _qtd, &status);
++
++		/*
++		 * Interrupt URB is done on the first transfer complete
++		 * interrupt.
++		 */
++	    dwc_otg_hcd_complete_urb(_hcd, urb, status);
++		save_data_toggle(_hc, _hc_regs, _qtd);
++		complete_periodic_xfer(_hcd, _hc, _hc_regs, _qtd,
++					DWC_OTG_HC_XFER_URB_COMPLETE, must_free);
++		break;
++	case PIPE_ISOCHRONOUS:
++		DWC_DEBUGPL(DBG_HCDV,  "  Isochronous transfer complete\n");
++		if (_qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_ALL)
++		{
++			halt_status = update_isoc_urb_state(_hcd, _hc, _hc_regs, _qtd,
++							    DWC_OTG_HC_XFER_COMPLETE);
++		}
++		complete_periodic_xfer(_hcd, _hc, _hc_regs, _qtd, halt_status, must_free);
++		break;
++	}
++
++        disable_hc_int(_hc_regs,xfercompl);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel STALL interrupt. This handler may be called in
++ * either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_stall_intr(dwc_otg_hcd_t *_hcd,
++				    dwc_hc_t *_hc,
++				    dwc_otg_hc_regs_t *_hc_regs,
++				    dwc_otg_qtd_t *_qtd, int *must_free)
++{
++	struct urb *urb = _qtd->urb;
++	int pipe_type = usb_pipetype(urb->pipe);
++
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "STALL Received--\n", _hc->hc_num);
++
++	if (pipe_type == PIPE_CONTROL) {
++		dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EPIPE);
++	}
++
++	if (pipe_type == PIPE_BULK || pipe_type == PIPE_INTERRUPT) {
++		dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EPIPE);
++		/*
++		 * USB protocol requires resetting the data toggle for bulk
++		 * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT)
++		 * setup command is issued to the endpoint. Anticipate the
++		 * CLEAR_FEATURE command since a STALL has occurred and reset
++		 * the data toggle now.
++		 */
++		_hc->qh->data_toggle = 0;
++	}
++
++	halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_STALL, must_free);
++	disable_hc_int(_hc_regs,stall);
++
++	return 1;
++}
++
++/*
++ * Updates the state of the URB when a transfer has been stopped due to an
++ * abnormal condition before the transfer completes. Modifies the
++ * actual_length field of the URB to reflect the number of bytes that have
++ * actually been transferred via the host channel.
++ */
++static void update_urb_state_xfer_intr(dwc_hc_t *_hc,
++				       dwc_otg_hc_regs_t *_hc_regs,
++				       struct urb *_urb,
++				       dwc_otg_qtd_t *_qtd,
++				       dwc_otg_halt_status_e _halt_status)
++{
++	uint32_t bytes_transferred = get_actual_xfer_length(_hc, _hc_regs, _qtd,
++							    _halt_status, NULL);
++	_urb->actual_length += bytes_transferred;
++
++#ifdef DEBUG
++	{
++		hctsiz_data_t 	hctsiz;
++		hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
++		DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
++			    __func__, (_hc->ep_is_in ? "IN" : "OUT"), _hc->hc_num);
++		DWC_DEBUGPL(DBG_HCDV, "  _hc->start_pkt_count %d\n", _hc->start_pkt_count);
++		DWC_DEBUGPL(DBG_HCDV, "  hctsiz.pktcnt %d\n", hctsiz.b.pktcnt);
++		DWC_DEBUGPL(DBG_HCDV, "  _hc->max_packet %d\n", _hc->max_packet);
++		DWC_DEBUGPL(DBG_HCDV, "  bytes_transferred %d\n", bytes_transferred);
++		DWC_DEBUGPL(DBG_HCDV, "  _urb->actual_length %d\n", _urb->actual_length);
++		DWC_DEBUGPL(DBG_HCDV, "  _urb->transfer_buffer_length %d\n",
++			    _urb->transfer_buffer_length);
++	}
++#endif	
++}
++
++/**
++ * Handles a host channel NAK interrupt. This handler may be called in either
++ * DMA mode or Slave mode.
++ */
++static int32_t handle_hc_nak_intr(dwc_otg_hcd_t *_hcd,
++				  dwc_hc_t *_hc,
++				  dwc_otg_hc_regs_t *_hc_regs,
++				  dwc_otg_qtd_t *_qtd, int *must_free)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "NAK Received--\n", _hc->hc_num);
++
++	/*
++	 * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and
++	 * interrupt.  Re-start the SSPLIT transfer.
++	 */
++	if (_hc->do_split) {
++		if (_hc->complete_split) {
++			_qtd->error_count = 0;
++		}
++		_qtd->complete_split = 0;
++		halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NAK, must_free);
++		goto handle_nak_done;
++	}
++
++	switch (usb_pipetype(_qtd->urb->pipe)) {
++	case PIPE_CONTROL:
++	case PIPE_BULK:
++		if (_hcd->core_if->dma_enable && _hc->ep_is_in) {
++			/*
++			 * NAK interrupts are enabled on bulk/control IN
++			 * transfers in DMA mode for the sole purpose of
++			 * resetting the error count after a transaction error
++			 * occurs. The core will continue transferring data.
++			 */
++			_qtd->error_count = 0;
++			goto handle_nak_done;
++		}
++
++		/*
++		 * NAK interrupts normally occur during OUT transfers in DMA
++		 * or Slave mode. For IN transfers, more requests will be
++		 * queued as request queue space is available.
++		 */
++		_qtd->error_count = 0;
++
++		if (!_hc->qh->ping_state) {
++			update_urb_state_xfer_intr(_hc, _hc_regs, _qtd->urb,
++						   _qtd, DWC_OTG_HC_XFER_NAK);
++			save_data_toggle(_hc, _hc_regs, _qtd);
++			if (_qtd->urb->dev->speed == USB_SPEED_HIGH) {
++				_hc->qh->ping_state = 1;
++			}
++		}
++
++		/*
++		 * Halt the channel so the transfer can be re-started from
++		 * the appropriate point or the PING protocol will
++		 * start/continue. 
++		 */
++	    halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NAK, must_free);
++		break;
++	case PIPE_INTERRUPT:
++		_qtd->error_count = 0;
++		halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NAK, must_free);
++		break;
++	case PIPE_ISOCHRONOUS:
++		/* Should never get called for isochronous transfers. */
++		BUG();
++		break;
++	}
++
++ handle_nak_done:
++	disable_hc_int(_hc_regs,nak);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel ACK interrupt. This interrupt is enabled when
++ * performing the PING protocol in Slave mode, when errors occur during
++ * either Slave mode or DMA mode, and during Start Split transactions.
++ */
++static int32_t handle_hc_ack_intr(dwc_otg_hcd_t *_hcd,
++	dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "ACK Received--\n", _hc->hc_num);
++
++	if (_hc->do_split) {
++		/*
++		 * Handle ACK on SSPLIT.
++		 * ACK should not occur in CSPLIT.
++		 */
++		if ((!_hc->ep_is_in) && (_hc->data_pid_start != DWC_OTG_HC_PID_SETUP)) {
++			_qtd->ssplit_out_xfer_count = _hc->xfer_len;
++		}
++		if (!(_hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !_hc->ep_is_in)) {
++			/* Don't need complete for isochronous out transfers. */
++			_qtd->complete_split = 1;
++		}
++
++		/* ISOC OUT */
++		if ((_hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && !_hc->ep_is_in) {
++			switch (_hc->xact_pos) {
++			case DWC_HCSPLIT_XACTPOS_ALL:
++				break;
++			case DWC_HCSPLIT_XACTPOS_END:
++				_qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
++				_qtd->isoc_split_offset = 0;
++				break;
++			case DWC_HCSPLIT_XACTPOS_BEGIN:
++			case DWC_HCSPLIT_XACTPOS_MID: 
++				/*
++				 * For BEGIN or MID, calculate the length for
++				 * the next microframe to determine the correct
++				 * SSPLIT token, either MID or END.
++				 */
++				do {
++					struct usb_iso_packet_descriptor *frame_desc;
++
++					frame_desc = &_qtd->urb->iso_frame_desc[_qtd->isoc_frame_index];
++					_qtd->isoc_split_offset += 188;
++
++					if ((frame_desc->length - _qtd->isoc_split_offset) <= 188) {
++						_qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_END;
++					}
++					else {
++						_qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_MID;
++					}
++					
++				} while(0);
++				break;
++			}
++		} else {
++			halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_ACK, must_free);
++		}
++	} else {
++		_qtd->error_count = 0;
++
++		if (_hc->qh->ping_state) {
++			_hc->qh->ping_state = 0;
++			/*
++			 * Halt the channel so the transfer can be re-started
++			 * from the appropriate point. This only happens in
++			 * Slave mode. In DMA mode, the ping_state is cleared
++			 * when the transfer is started because the core
++			 * automatically executes the PING, then the transfer.
++			 */
++		    halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_ACK, must_free);
++		} else {
++		    halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
++		}
++	}
++
++	/*
++	 * If the ACK occurred when _not_ in the PING state, let the channel
++	 * continue transferring data after clearing the error count.
++	 */
++
++	disable_hc_int(_hc_regs,ack);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel NYET interrupt. This interrupt should only occur on
++ * Bulk and Control OUT endpoints and for complete split transactions. If a
++ * NYET occurs at the same time as a Transfer Complete interrupt, it is
++ * handled in the xfercomp interrupt handler, not here. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t *_hcd,
++				   dwc_hc_t *_hc,
++				   dwc_otg_hc_regs_t *_hc_regs,
++				   dwc_otg_qtd_t *_qtd, int *must_free)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "NYET Received--\n", _hc->hc_num);
++
++	/*
++	 * NYET on CSPLIT
++	 * re-do the CSPLIT immediately on non-periodic
++	 */
++	if ((_hc->do_split) && (_hc->complete_split)) {
++		if ((_hc->ep_type == DWC_OTG_EP_TYPE_INTR) || 
++		    (_hc->ep_type == DWC_OTG_EP_TYPE_ISOC)) {
++			int frnum = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(_hcd));
++
++			if (dwc_full_frame_num(frnum) !=
++			    dwc_full_frame_num(_hc->qh->sched_frame)) {
++				/*
++				 * No longer in the same full speed frame.
++				 * Treat this as a transaction error.
++				 */
++#if 0
++				/** @todo Fix system performance so this can
++				 * be treated as an error. Right now complete
++				 * splits cannot be scheduled precisely enough
++				 * due to other system activity, so this error
++				 * occurs regularly in Slave mode.
++				 */
++				_qtd->error_count++;
++#endif				
++				_qtd->complete_split = 0;
++				halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_XACT_ERR, must_free);
++				/** @todo add support for isoc release */
++				goto handle_nyet_done;
++			}
++		}
++
++		halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NYET, must_free);
++		goto handle_nyet_done;
++	}
++
++	_hc->qh->ping_state = 1;
++	_qtd->error_count = 0;
++
++	update_urb_state_xfer_intr(_hc, _hc_regs, _qtd->urb, _qtd,
++				   DWC_OTG_HC_XFER_NYET);
++	save_data_toggle(_hc, _hc_regs, _qtd);
++
++	/*
++	 * Halt the channel and re-start the transfer so the PING
++	 * protocol will start.
++	 */
++    halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NYET, must_free);
++
++handle_nyet_done:
++	disable_hc_int(_hc_regs,nyet);
++	clear_hc_int(_hc_regs, nyet);
++	return 1;
++}
++
++/**
++ * Handles a host channel babble interrupt. This handler may be called in
++ * either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_babble_intr(dwc_otg_hcd_t *_hcd,
++	dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "Babble Error--\n", _hc->hc_num);
++	if (_hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
++		dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EOVERFLOW);
++		halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_BABBLE_ERR, must_free);
++	} else {
++		dwc_otg_halt_status_e halt_status;
++		halt_status = update_isoc_urb_state(_hcd, _hc, _hc_regs, _qtd,
++						    DWC_OTG_HC_XFER_BABBLE_ERR);
++		halt_channel(_hcd, _hc, _qtd, halt_status, must_free);
++	}
++	disable_hc_int(_hc_regs,bblerr);
++	return 1;
++}
++
++/**
++ * Handles a host channel AHB error interrupt. This handler is only called in
++ * DMA mode.
++ */
++static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t *_hcd,
++				     dwc_hc_t *_hc,
++				     dwc_otg_hc_regs_t *_hc_regs,
++				     dwc_otg_qtd_t *_qtd)
++{
++	hcchar_data_t 	hcchar;
++	hcsplt_data_t	hcsplt;
++	hctsiz_data_t 	hctsiz;
++	uint32_t	hcdma;
++	struct urb	*urb = _qtd->urb;
++
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "AHB Error--\n", _hc->hc_num);
++
++	hcchar.d32 = dwc_read_reg32(&_hc_regs->hcchar);
++	hcsplt.d32 = dwc_read_reg32(&_hc_regs->hcsplt);
++	hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
++	hcdma = dwc_read_reg32(&_hc_regs->hcdma);
++
++	DWC_ERROR("AHB ERROR, Channel %d\n", _hc->hc_num);
++	DWC_ERROR("  hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
++	DWC_ERROR("  hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Enqueue\n");
++	DWC_ERROR("  Device address: %d\n", usb_pipedevice(urb->pipe));
++	DWC_ERROR("  Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
++		    (usb_pipein(urb->pipe) ? "IN" : "OUT"));
++	DWC_ERROR("  Endpoint type: %s\n",
++		    ({char *pipetype;
++		    switch (usb_pipetype(urb->pipe)) {
++		    case PIPE_CONTROL: pipetype = "CONTROL"; break;
++		    case PIPE_BULK: pipetype = "BULK"; break;
++		    case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break;
++		    case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break;
++		    default: pipetype = "UNKNOWN"; break;
++		    }; pipetype;}));
++	DWC_ERROR("  Speed: %s\n",
++		    ({char *speed;
++		    switch (urb->dev->speed) {
++		    case USB_SPEED_HIGH: speed = "HIGH"; break;
++		    case USB_SPEED_FULL: speed = "FULL"; break;
++		    case USB_SPEED_LOW: speed = "LOW"; break;
++		    default: speed = "UNKNOWN"; break;
++		    }; speed;}));
++	DWC_ERROR("  Max packet size: %d\n",
++		    usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
++	DWC_ERROR("  Data buffer length: %d\n", urb->transfer_buffer_length);
++	DWC_ERROR("  Transfer buffer: %p, Transfer DMA: %p\n",
++		  urb->transfer_buffer, (void *)(u32)urb->transfer_dma);
++	DWC_ERROR("  Setup buffer: %p, Setup DMA: %p\n", 
++		  urb->setup_packet, (void *)(u32)urb->setup_dma);
++	DWC_ERROR("  Interval: %d\n", urb->interval);
++
++	dwc_otg_hcd_complete_urb(_hcd, urb, -EIO);
++
++	/*
++	 * Force a channel halt. Don't call halt_channel because that won't
++	 * write to the HCCHARn register in DMA mode to force the halt.
++	 */
++	dwc_otg_hc_halt(_hcd->core_if, _hc, DWC_OTG_HC_XFER_AHB_ERR);
++
++	disable_hc_int(_hc_regs,ahberr);
++	return 1;
++}
++
++/**
++ * Handles a host channel transaction error interrupt. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t *_hcd,
++	dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "Transaction Error--\n", _hc->hc_num);
++
++	switch (usb_pipetype(_qtd->urb->pipe)) {
++	case PIPE_CONTROL:
++	case PIPE_BULK:
++		_qtd->error_count++;
++		if (!_hc->qh->ping_state) {
++			update_urb_state_xfer_intr(_hc, _hc_regs, _qtd->urb,
++						   _qtd, DWC_OTG_HC_XFER_XACT_ERR);
++			save_data_toggle(_hc, _hc_regs, _qtd);
++			if (!_hc->ep_is_in && _qtd->urb->dev->speed == USB_SPEED_HIGH) {
++				_hc->qh->ping_state = 1;
++			}
++		}
++
++		/*
++		 * Halt the channel so the transfer can be re-started from
++		 * the appropriate point or the PING protocol will start.
++		 */
++	    halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_XACT_ERR, must_free);
++		break;
++	case PIPE_INTERRUPT:
++		_qtd->error_count++;
++		if ((_hc->do_split) && (_hc->complete_split)) {
++			_qtd->complete_split = 0;
++		}
++		halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_XACT_ERR, must_free);
++		break;
++	case PIPE_ISOCHRONOUS:
++		{
++			dwc_otg_halt_status_e halt_status;
++			halt_status = update_isoc_urb_state(_hcd, _hc, _hc_regs, _qtd,
++							    DWC_OTG_HC_XFER_XACT_ERR);
++							    
++			halt_channel(_hcd, _hc, _qtd, halt_status, must_free);
++		}
++		break;
++	}
++		
++
++	disable_hc_int(_hc_regs,xacterr);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel frame overrun interrupt. This handler may be called
++ * in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t *_hcd,
++	dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "Frame Overrun--\n", _hc->hc_num);
++
++	switch (usb_pipetype(_qtd->urb->pipe)) {
++	case PIPE_CONTROL:
++	case PIPE_BULK:
++		break;
++	case PIPE_INTERRUPT:
++		halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_FRAME_OVERRUN, must_free);
++		break;
++	case PIPE_ISOCHRONOUS:
++		{
++			dwc_otg_halt_status_e halt_status;
++			halt_status = update_isoc_urb_state(_hcd, _hc, _hc_regs, _qtd,
++							    DWC_OTG_HC_XFER_FRAME_OVERRUN);
++							    
++			halt_channel(_hcd, _hc, _qtd, halt_status, must_free);
++		}
++		break;
++	}
++
++	disable_hc_int(_hc_regs,frmovrun);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel data toggle error interrupt. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t *_hcd,
++	dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "Data Toggle Error--\n", _hc->hc_num);
++
++	if (_hc->ep_is_in) {
++		_qtd->error_count = 0;
++	} else {
++		DWC_ERROR("Data Toggle Error on OUT transfer,"
++			  "channel %d\n", _hc->hc_num);
++	}
++
++	disable_hc_int(_hc_regs,datatglerr);
++
++	return 1;
++}
++
++#ifdef DEBUG
++/**
++ * This function is for debug only. It checks that a valid halt status is set
++ * and that HCCHARn.chdis is clear. If there's a problem, corrective action is
++ * taken and a warning is issued.
++ * @return 1 if halt status is ok, 0 otherwise.
++ */
++static inline int halt_status_ok(dwc_otg_hcd_t *_hcd,
++	dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
++{
++	hcchar_data_t hcchar;
++	hctsiz_data_t hctsiz;
++	hcint_data_t hcint;
++	hcintmsk_data_t hcintmsk;
++	hcsplt_data_t hcsplt;
++
++	if (_hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS) {
++		/*
++		 * This code is here only as a check. This condition should
++		 * never happen. Ignore the halt if it does occur.
++		 */
++		hcchar.d32 = dwc_read_reg32(&_hc_regs->hcchar);
++		hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
++		hcint.d32 = dwc_read_reg32(&_hc_regs->hcint);
++		hcintmsk.d32 = dwc_read_reg32(&_hc_regs->hcintmsk);
++		hcsplt.d32 = dwc_read_reg32(&_hc_regs->hcsplt);
++		DWC_WARN("%s: _hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS, "
++			 "channel %d, hcchar 0x%08x, hctsiz 0x%08x, "
++			 "hcint 0x%08x, hcintmsk 0x%08x, "
++			 "hcsplt 0x%08x, qtd->complete_split %d\n",
++			 __func__, _hc->hc_num, hcchar.d32, hctsiz.d32,
++			 hcint.d32, hcintmsk.d32,
++			 hcsplt.d32, _qtd->complete_split);
++
++		DWC_WARN("%s: no halt status, channel %d, ignoring interrupt\n",
++			 __func__, _hc->hc_num);
++		DWC_WARN("\n");
++		clear_hc_int(_hc_regs,chhltd);
++		return 0;
++	}
++
++	/*
++	 * This code is here only as a check. hcchar.chdis should
++	 * never be set when the halt interrupt occurs. Halt the
++	 * channel again if it does occur.
++	 */
++	hcchar.d32 = dwc_read_reg32(&_hc_regs->hcchar);
++	if (hcchar.b.chdis) {
++		DWC_WARN("%s: hcchar.chdis set unexpectedly, "
++			 "hcchar 0x%08x, trying to halt again\n",
++			 __func__, hcchar.d32);
++		clear_hc_int(_hc_regs,chhltd);
++		_hc->halt_pending = 0;
++		halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
++		return 0;
++	}
++
++	return 1;
++}
++#endif
++
++/**
++ * Handles a host Channel Halted interrupt in DMA mode. This handler
++ * determines the reason the channel halted and proceeds accordingly.
++ */
++static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t *_hcd,
++	dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
++{
++	hcint_data_t hcint;
++	hcintmsk_data_t hcintmsk;
++
++	if (_hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
++	    _hc->halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
++		/*
++		 * Just release the channel. A dequeue can happen on a
++		 * transfer timeout. In the case of an AHB Error, the channel
++		 * was forced to halt because there's no way to gracefully
++		 * recover.
++		 */
++	    release_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
++		return;
++	}
++
++	/* Read the HCINTn register to determine the cause for the halt. */
++	hcint.d32 = dwc_read_reg32(&_hc_regs->hcint);
++	hcintmsk.d32 = dwc_read_reg32(&_hc_regs->hcintmsk);
++
++	if (hcint.b.xfercomp) {
++		/** @todo This is here because of a possible hardware bug.  Spec
++		 * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT
++		 * interrupt w/ACK bit set should occur, but I only see the
++		 * XFERCOMP bit, even with it masked out.  This is a workaround
++		 * for that behavior.  Should fix this when hardware is fixed.
++		 */
++		if ((_hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && (!_hc->ep_is_in)) {
++			handle_hc_ack_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++		}
++		handle_hc_xfercomp_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++	} else if (hcint.b.stall) {
++		handle_hc_stall_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++	} else if (hcint.b.xacterr) {
++		/*
++		 * Must handle xacterr before nak or ack. Could get a xacterr
++		 * at the same time as either of these on a BULK/CONTROL OUT
++		 * that started with a PING. The xacterr takes precedence.
++		 */
++	    handle_hc_xacterr_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++	} else if (hcint.b.nyet) {
++		/*
++		 * Must handle nyet before nak or ack. Could get a nyet at the
++		 * same time as either of those on a BULK/CONTROL OUT that
++		 * started with a PING. The nyet takes precedence.
++		 */
++	    handle_hc_nyet_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++	} else if (hcint.b.bblerr) {
++		handle_hc_babble_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++	} else if (hcint.b.frmovrun) {
++		handle_hc_frmovrun_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++	} else if (hcint.b.datatglerr) {
++		handle_hc_datatglerr_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++		_hc->qh->data_toggle = 0;
++		halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
++	} else if (hcint.b.nak && !hcintmsk.b.nak) {
++		/*
++		 * If nak is not masked, it's because a non-split IN transfer
++		 * is in an error state. In that case, the nak is handled by
++		 * the nak interrupt handler, not here. Handle nak here for
++		 * BULK/CONTROL OUT transfers, which halt on a NAK to allow
++		 * rewinding the buffer pointer.
++		 */
++	    handle_hc_nak_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++	} else if (hcint.b.ack && !hcintmsk.b.ack) {
++		/*
++		 * If ack is not masked, it's because a non-split IN transfer
++		 * is in an error state. In that case, the ack is handled by
++		 * the ack interrupt handler, not here. Handle ack here for
++		 * split transfers. Start splits halt on ACK.
++		 */
++	    handle_hc_ack_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++	} else {
++		if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++		    _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++			/*
++			 * A periodic transfer halted with no other channel
++			 * interrupts set. Assume it was halted by the core
++			 * because it could not be completed in its scheduled
++			 * (micro)frame.
++			 */
++#ifdef DEBUG
++			DWC_PRINT("%s: Halt channel %d (assume incomplete periodic transfer)\n",
++				  __func__, _hc->hc_num);
++#endif	/*  */
++		    halt_channel(_hcd, _hc, _qtd,
++					 DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE, must_free);
++		} else {
++#ifdef DEBUG
++			DWC_ERROR("%s: Channel %d, DMA Mode -- ChHltd set, but reason "
++			     "for halting is unknown, nyet %d, hcint 0x%08x, intsts 0x%08x\n",
++			     __func__, _hc->hc_num, hcint.b.nyet, hcint.d32,
++				 dwc_read_reg32(&_hcd->core_if->core_global_regs->gintsts));
++#endif			
++			halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
++		}
++	}
++}
++
++/**
++ * Handles a host channel Channel Halted interrupt.
++ *
++ * In slave mode, this handler is called only when the driver specifically
++ * requests a halt. This occurs during handling other host channel interrupts
++ * (e.g. nak, xacterr, stall, nyet, etc.).
++ *
++ * In DMA mode, this is the interrupt that occurs when the core has finished
++ * processing a transfer on a channel. Other host channel interrupts (except
++ * ahberr) are disabled in DMA mode.
++ */
++static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t *_hcd,
++	dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "Channel Halted--\n", _hc->hc_num);
++
++	if (_hcd->core_if->dma_enable) {
++		handle_hc_chhltd_intr_dma(_hcd, _hc, _hc_regs, _qtd, must_free);
++	} else {
++#ifdef DEBUG
++		if (!halt_status_ok(_hcd, _hc, _hc_regs, _qtd, must_free)) {
++			return 1;
++		}
++#endif	/*  */
++	    release_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
++	}
++
++	return 1;
++}
++
++/** Handles interrupt for a specific Host Channel */
++int32_t dwc_otg_hcd_handle_hc_n_intr (dwc_otg_hcd_t *_dwc_otg_hcd, uint32_t _num)
++{
++	int must_free = 0;
++	int retval = 0;
++	hcint_data_t hcint;
++	hcintmsk_data_t hcintmsk;
++	dwc_hc_t *hc;
++	dwc_otg_hc_regs_t *hc_regs;
++	dwc_otg_qtd_t *qtd;
++	
++	DWC_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", _num);
++
++	hc = _dwc_otg_hcd->hc_ptr_array[_num];
++	hc_regs = _dwc_otg_hcd->core_if->host_if->hc_regs[_num];
++	qtd = list_entry(hc->qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
++
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk);
++	DWC_DEBUGPL(DBG_HCDV, "  hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
++		    hcint.d32, hcintmsk.d32, (hcint.d32 & hcintmsk.d32));
++	hcint.d32 = hcint.d32 & hcintmsk.d32;
++
++	if (!_dwc_otg_hcd->core_if->dma_enable) {
++		if ((hcint.b.chhltd) && (hcint.d32 != 0x2)) {
++			hcint.b.chhltd = 0;
++		}
++	}
++
++	if (hcint.b.xfercomp) {
++		retval |= handle_hc_xfercomp_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++		/*
++		 * If NYET occurred at same time as Xfer Complete, the NYET is
++		 * handled by the Xfer Complete interrupt handler. Don't want
++		 * to call the NYET interrupt handler in this case.
++		 */
++		hcint.b.nyet = 0;
++	}
++	if (hcint.b.chhltd) {
++		retval |= handle_hc_chhltd_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++	}
++	if (hcint.b.ahberr) {
++		retval |= handle_hc_ahberr_intr(_dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.stall) {
++		retval |= handle_hc_stall_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++	}
++	if (hcint.b.nak) {
++		retval |= handle_hc_nak_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++	}
++	if (hcint.b.ack) {
++		retval |= handle_hc_ack_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++	}
++	if (hcint.b.nyet) {
++		retval |= handle_hc_nyet_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++	}
++	if (hcint.b.xacterr) {
++		retval |= handle_hc_xacterr_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++	}
++	if (hcint.b.bblerr) {
++		retval |= handle_hc_babble_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++	}
++	if (hcint.b.frmovrun) {
++		retval |= handle_hc_frmovrun_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++	}
++	if (hcint.b.datatglerr) {
++		retval |= handle_hc_datatglerr_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++	}
++
++	/*
++	 * Logic to free the qtd here, at the end of the hc intr
++	 * processing, if the handling of this interrupt determined
++	 * that it needs to be freed.
++	 */
++	if (must_free) {
++		/* Free the qtd here now that we are done using it. */
++		dwc_otg_hcd_qtd_free(qtd);
++	}
++	return retval;
++}
++
++#endif /* DWC_DEVICE_ONLY */
+diff --git a/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c b/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c
+new file mode 100644
+index 0000000..fcb5ce6
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c
+@@ -0,0 +1,794 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd_queue.c $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 537387 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++/**
++ * @file
++ *
++ * This file contains the functions to manage Queue Heads and Queue
++ * Transfer Descriptors.
++ */
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/errno.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/string.h>
++
++#include "dwc_otg_driver.h"
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_regs.h"
++
++/**
++ * This function allocates and initializes a QH.
++ *
++ * @param _hcd The HCD state structure for the DWC OTG controller.
++ * @param[in] _urb Holds the information about the device/endpoint that we need
++ * to initialize the QH.
++ *
++ * @return Returns pointer to the newly allocated QH, or NULL on error. */
++dwc_otg_qh_t *dwc_otg_hcd_qh_create (dwc_otg_hcd_t *_hcd, struct urb *_urb)
++{
++	dwc_otg_qh_t *qh;
++
++	/* Allocate memory */
++	/** @todo add memflags argument */
++	qh = dwc_otg_hcd_qh_alloc ();
++	if (qh == NULL) {
++		return NULL;
++	}
++
++	dwc_otg_hcd_qh_init (_hcd, qh, _urb);
++	return qh;
++}
++
++/** Free each QTD in the QH's QTD-list then free the QH.  QH should already be
++ * removed from a list.  QTD list should already be empty if called from URB
++ * Dequeue.
++ *
++ * @param[in] _qh The QH to free.
++ */
++void dwc_otg_hcd_qh_free (dwc_otg_qh_t *_qh)
++{
++	dwc_otg_qtd_t *qtd;
++	struct list_head *pos;
++	unsigned long flags;
++
++	/* Free each QTD in the QTD list */
++	local_irq_save (flags);
++	for (pos = _qh->qtd_list.next;
++	     pos != &_qh->qtd_list;
++	     pos = _qh->qtd_list.next)
++	{
++		list_del (pos);
++		qtd = dwc_list_to_qtd (pos);
++		dwc_otg_hcd_qtd_free (qtd);
++	}
++	local_irq_restore (flags);
++
++	kfree (_qh);
++	return;
++}
++
++/** Initializes a QH structure.
++ *
++ * @param[in] _hcd The HCD state structure for the DWC OTG controller.
++ * @param[in] _qh The QH to init.
++ * @param[in] _urb Holds the information about the device/endpoint that we need
++ * to initialize the QH. */
++#define SCHEDULE_SLOP 10
++void dwc_otg_hcd_qh_init(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, struct urb *_urb)
++{
++	memset (_qh, 0, sizeof (dwc_otg_qh_t));
++
++	/* Initialize QH */
++	switch (usb_pipetype(_urb->pipe)) {
++	case PIPE_CONTROL:
++		_qh->ep_type = USB_ENDPOINT_XFER_CONTROL;
++		break;
++	case PIPE_BULK:
++		_qh->ep_type = USB_ENDPOINT_XFER_BULK;
++		break;
++	case PIPE_ISOCHRONOUS:
++		_qh->ep_type = USB_ENDPOINT_XFER_ISOC;
++		break;
++	case PIPE_INTERRUPT: 
++		_qh->ep_type = USB_ENDPOINT_XFER_INT;
++		break;
++	}
++
++	_qh->ep_is_in = usb_pipein(_urb->pipe) ? 1 : 0;
++
++	_qh->data_toggle = DWC_OTG_HC_PID_DATA0;
++	_qh->maxp = usb_maxpacket(_urb->dev, _urb->pipe, !(usb_pipein(_urb->pipe)));
++	INIT_LIST_HEAD(&_qh->qtd_list);
++	INIT_LIST_HEAD(&_qh->qh_list_entry);
++	_qh->channel = NULL;
++
++	/* FS/LS Enpoint on HS Hub 
++	 * NOT virtual root hub */
++	_qh->do_split = 0;
++	_qh->speed = _urb->dev->speed;
++	if (((_urb->dev->speed == USB_SPEED_LOW) || 
++	     (_urb->dev->speed == USB_SPEED_FULL)) &&
++		(_urb->dev->tt) && (_urb->dev->tt->hub) && (_urb->dev->tt->hub->devnum != 1)) {
++		DWC_DEBUGPL(DBG_HCD, "QH init: EP %d: TT found at hub addr %d, for port %d\n", 
++			   usb_pipeendpoint(_urb->pipe), _urb->dev->tt->hub->devnum, 
++			   _urb->dev->ttport);
++		_qh->do_split = 1;
++	}
++
++	if (_qh->ep_type == USB_ENDPOINT_XFER_INT ||
++	    _qh->ep_type == USB_ENDPOINT_XFER_ISOC) {
++		/* Compute scheduling parameters once and save them. */
++		hprt0_data_t hprt;
++
++		/** @todo Account for split transfers in the bus time. */
++		int bytecount = dwc_hb_mult(_qh->maxp) * dwc_max_packet(_qh->maxp);
++		_qh->usecs = NS_TO_US(usb_calc_bus_time(_urb->dev->speed,
++					       usb_pipein(_urb->pipe),
++					(_qh->ep_type == USB_ENDPOINT_XFER_ISOC),bytecount));
++
++		/* Start in a slightly future (micro)frame. */
++		_qh->sched_frame = dwc_frame_num_inc(_hcd->frame_number, SCHEDULE_SLOP);
++		_qh->interval = _urb->interval;
++#if 0
++		/* Increase interrupt polling rate for debugging. */
++		if (_qh->ep_type == USB_ENDPOINT_XFER_INT) {
++			_qh->interval = 8;
++		}
++#endif		
++		hprt.d32 = dwc_read_reg32(_hcd->core_if->host_if->hprt0);
++		if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) && 
++		    ((_urb->dev->speed == USB_SPEED_LOW) || 
++		     (_urb->dev->speed == USB_SPEED_FULL)))
++		{
++			_qh->interval *= 8;
++			_qh->sched_frame |= 0x7;
++			_qh->start_split_frame = _qh->sched_frame;
++		}
++	}
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n");
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - qh = %p\n", _qh);
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Device Address = %d\n",
++		    _urb->dev->devnum);
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Endpoint %d, %s\n",
++		    usb_pipeendpoint(_urb->pipe),
++		    usb_pipein(_urb->pipe) == USB_DIR_IN ? "IN" : "OUT");
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Speed = %s\n", 
++		    ({ char *speed; switch (_urb->dev->speed) {
++		    case USB_SPEED_LOW: speed = "low";	break;
++		    case USB_SPEED_FULL: speed = "full";	break;
++		    case USB_SPEED_HIGH: speed = "high";	break;
++		    default: speed = "?";	break;
++		    }; speed;}));
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Type = %s\n",
++		    ({ char *type; switch (_qh->ep_type) {
++		    case USB_ENDPOINT_XFER_ISOC: type = "isochronous";	break;
++		    case USB_ENDPOINT_XFER_INT: type = "interrupt";	break;
++		    case USB_ENDPOINT_XFER_CONTROL: type = "control";	break;
++		    case USB_ENDPOINT_XFER_BULK: type = "bulk";	break;
++		    default: type = "?";	break;
++		    }; type;}));
++#ifdef DEBUG
++	if (_qh->ep_type == USB_ENDPOINT_XFER_INT) {
++		DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs = %d\n",
++			    _qh->usecs);
++		DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - interval = %d\n",
++			    _qh->interval);
++	}
++#endif	
++	
++	return;
++}
++
++/**
++ * Microframe scheduler
++ * track the total use in hcd->frame_usecs
++ * keep each qh use in qh->frame_usecs
++ * when surrendering the qh then donate the time back
++ */
++const unsigned short max_uframe_usecs[]={ 100, 100, 100, 100, 100, 100, 30, 0 };
++
++/*
++ * called from dwc_otg_hcd.c:dwc_otg_hcd_init
++ */
++int init_hcd_usecs(dwc_otg_hcd_t *_hcd)
++{
++	int i;
++	for (i=0; i<8; i++) {
++		_hcd->frame_usecs[i] = max_uframe_usecs[i];
++	}
++	return 0;
++}
++
++static int find_single_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
++{
++	int i;
++	unsigned short utime;
++	int t_left;
++	int ret;
++	int done;
++
++	ret = -1;
++	utime = _qh->usecs;
++	t_left = utime;
++	i = 0;
++	done = 0;
++	while (done == 0) {
++		/* At the start _hcd->frame_usecs[i] = max_uframe_usecs[i]; */
++		if (utime <= _hcd->frame_usecs[i]) {
++			_hcd->frame_usecs[i] -= utime;
++			_qh->frame_usecs[i] += utime;
++			t_left -= utime;
++			ret = i;
++			done = 1;
++			return ret;
++		} else {
++			i++;
++			if (i == 8) {
++				done = 1;
++				ret = -1;
++			}
++		}
++	}
++	return ret;
++}
++
++/*
++ * use this for FS apps that can span multiple uframes
++ */
++static int find_multi_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
++{
++	int i;
++	int j;
++	unsigned short utime;
++	int t_left;
++	int ret;
++	int done;
++	unsigned short xtime;
++
++	ret = -1;
++	utime = _qh->usecs;
++	t_left = utime;
++	i = 0;
++	done = 0;
++loop:
++	while (done == 0) {
++		if(_hcd->frame_usecs[i] <= 0) {
++			i++;
++			if (i == 8) {
++				done = 1;
++				ret = -1;
++			}
++			goto loop;
++		}
++
++		/*
++		 * we need n consequtive slots
++		 * so use j as a start slot j plus j+1 must be enough time (for now)
++		 */
++		xtime= _hcd->frame_usecs[i];
++		for (j = i+1 ; j < 8 ; j++ ) {
++			/*
++			 * if we add this frame remaining time to xtime we may
++			 * be OK, if not we need to test j for a complete frame
++			 */
++			if ((xtime+_hcd->frame_usecs[j]) < utime) {
++				if (_hcd->frame_usecs[j] < max_uframe_usecs[j]) {
++					j = 8;
++					ret = -1;
++					continue;
++				}
++			}
++			if (xtime >= utime) {
++				ret = i;
++				j = 8;	/* stop loop with a good value ret */
++				continue;
++			}
++			/* add the frame time to x time */
++			xtime += _hcd->frame_usecs[j];
++			/* we must have a fully available next frame or break */
++			if ((xtime < utime)
++			    && (_hcd->frame_usecs[j] == max_uframe_usecs[j])) {
++				ret = -1;
++				j = 8;	/* stop loop with a bad value ret */
++				continue;
++			}
++		}
++		if (ret >= 0) {
++			t_left = utime;
++			for (j = i; (t_left>0) && (j < 8); j++ ) {
++				t_left -= _hcd->frame_usecs[j];
++				if ( t_left <= 0 ) {
++					_qh->frame_usecs[j] += _hcd->frame_usecs[j] + t_left;
++					_hcd->frame_usecs[j]= -t_left;
++					ret = i;
++					done = 1;
++				} else {
++					_qh->frame_usecs[j] += _hcd->frame_usecs[j];
++					_hcd->frame_usecs[j] = 0;
++				}
++			}
++		} else {
++			i++;
++			if (i == 8) {
++				done = 1;
++				ret = -1;
++			}
++		}
++	}
++	return ret;
++}
++
++static int find_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
++{
++	int ret;
++	ret = -1;
++
++	if (_qh->speed == USB_SPEED_HIGH) {
++		/* if this is a hs transaction we need a full frame */
++		ret = find_single_uframe(_hcd, _qh);
++	} else {
++		/* if this is a fs transaction we may need a sequence of frames */
++		ret = find_multi_uframe(_hcd, _qh);
++	}
++	return ret;
++}
++			
++/**
++ * Checks that the max transfer size allowed in a host channel is large enough
++ * to handle the maximum data transfer in a single (micro)frame for a periodic
++ * transfer.
++ *
++ * @param _hcd The HCD state structure for the DWC OTG controller.
++ * @param _qh QH for a periodic endpoint.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++static int check_max_xfer_size(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
++{
++	int		status;
++	uint32_t 	max_xfer_size;
++	uint32_t	max_channel_xfer_size;
++
++	status = 0;
++
++	max_xfer_size = dwc_max_packet(_qh->maxp) * dwc_hb_mult(_qh->maxp);
++	max_channel_xfer_size = _hcd->core_if->core_params->max_transfer_size;
++
++	if (max_xfer_size > max_channel_xfer_size) {
++		DWC_NOTICE("%s: Periodic xfer length %d > "
++			    "max xfer length for channel %d\n",
++			    __func__, max_xfer_size, max_channel_xfer_size);
++		status = -ENOSPC;
++	}
++
++	return status;
++}
++
++/**
++ * Schedules an interrupt or isochronous transfer in the periodic schedule.
++ *
++ * @param _hcd The HCD state structure for the DWC OTG controller.
++ * @param _qh QH for the periodic transfer. The QH should already contain the
++ * scheduling information.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++static int schedule_periodic(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
++{
++	int status = 0;
++
++	int frame;
++	status = find_uframe(_hcd, _qh);
++	frame = -1;
++	if (status == 0) {
++		frame = 7;
++	} else {
++		if (status > 0 )
++			frame = status-1;
++	}
++
++	/* Set the new frame up */
++	if (frame > -1) {
++		_qh->sched_frame &= ~0x7;
++		_qh->sched_frame |= (frame & 7);
++	}
++
++	if (status != -1 )
++		status = 0;
++	if (status) {
++		DWC_NOTICE("%s: Insufficient periodic bandwidth for "
++			   "periodic transfer.\n", __func__);
++		return status;
++	}
++
++	status = check_max_xfer_size(_hcd, _qh);
++	if (status) {
++		DWC_NOTICE("%s: Channel max transfer size too small "
++			    "for periodic transfer.\n", __func__);
++		return status;
++	}
++
++	/* Always start in the inactive schedule. */
++	list_add_tail(&_qh->qh_list_entry, &_hcd->periodic_sched_inactive);
++
++
++	/* Update claimed usecs per (micro)frame. */
++	_hcd->periodic_usecs += _qh->usecs;
++
++	/* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */
++	hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_allocated += _qh->usecs / _qh->interval;
++	if (_qh->ep_type == USB_ENDPOINT_XFER_INT) {
++		hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_int_reqs++;
++		DWC_DEBUGPL(DBG_HCD, "Scheduled intr: qh %p, usecs %d, period %d\n",
++			    _qh, _qh->usecs, _qh->interval);
++	} else {
++		hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_isoc_reqs++;
++		DWC_DEBUGPL(DBG_HCD, "Scheduled isoc: qh %p, usecs %d, period %d\n",
++			    _qh, _qh->usecs, _qh->interval);
++	}
++		
++	return status;
++}
++
++/**
++ * This function adds a QH to either the non periodic or periodic schedule if
++ * it is not already in the schedule. If the QH is already in the schedule, no
++ * action is taken.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++int dwc_otg_hcd_qh_add (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
++{
++	unsigned long flags;
++	int status = 0;
++
++	local_irq_save(flags);
++
++	if (!list_empty(&_qh->qh_list_entry)) {
++		/* QH already in a schedule. */
++		goto done;
++	}
++
++	/* Add the new QH to the appropriate schedule */
++	if (dwc_qh_is_non_per(_qh)) {
++		/* Always start in the inactive schedule. */
++		list_add_tail(&_qh->qh_list_entry, &_hcd->non_periodic_sched_inactive);
++	} else {
++		status = schedule_periodic(_hcd, _qh);
++	}
++
++ done:
++	local_irq_restore(flags);
++
++	return status;
++}
++
++/**
++ * This function adds a QH to the non periodic deferred schedule.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++int dwc_otg_hcd_qh_add_deferred(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
++{
++	unsigned long flags;
++	local_irq_save(flags);
++	if (!list_empty(&_qh->qh_list_entry)) {
++		/* QH already in a schedule. */
++		goto done;
++	}
++
++	/* Add the new QH to the non periodic deferred schedule */
++	if (dwc_qh_is_non_per(_qh)) {
++		list_add_tail(&_qh->qh_list_entry,
++			      &_hcd->non_periodic_sched_deferred);
++	}
++done:
++	local_irq_restore(flags);
++	return 0;
++}
++
++/**
++ * Removes an interrupt or isochronous transfer from the periodic schedule.
++ *
++ * @param _hcd The HCD state structure for the DWC OTG controller.
++ * @param _qh QH for the periodic transfer.
++ */
++static void deschedule_periodic(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
++{
++	int i;
++	list_del_init(&_qh->qh_list_entry);
++
++
++	/* Update claimed usecs per (micro)frame. */
++	_hcd->periodic_usecs -= _qh->usecs;
++
++	for (i = 0; i < 8; i++) {
++		_hcd->frame_usecs[i] += _qh->frame_usecs[i];
++		_qh->frame_usecs[i] = 0;
++	}
++	/* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */
++	hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_allocated -= _qh->usecs / _qh->interval;
++
++	if (_qh->ep_type == USB_ENDPOINT_XFER_INT) {
++		hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_int_reqs--;
++		DWC_DEBUGPL(DBG_HCD, "Descheduled intr: qh %p, usecs %d, period %d\n",
++			    _qh, _qh->usecs, _qh->interval);
++	} else {
++		hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_isoc_reqs--;
++		DWC_DEBUGPL(DBG_HCD, "Descheduled isoc: qh %p, usecs %d, period %d\n",
++			    _qh, _qh->usecs, _qh->interval);
++	}
++}
++
++/** 
++ * Removes a QH from either the non-periodic or periodic schedule.  Memory is
++ * not freed.
++ *
++ * @param[in] _hcd The HCD state structure.
++ * @param[in] _qh QH to remove from schedule. */
++void dwc_otg_hcd_qh_remove (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
++{
++	unsigned long flags;
++
++	local_irq_save(flags);
++
++	if (list_empty(&_qh->qh_list_entry)) {
++		/* QH is not in a schedule. */
++		goto done;
++	}
++
++	if (dwc_qh_is_non_per(_qh)) {
++		if (_hcd->non_periodic_qh_ptr == &_qh->qh_list_entry) {
++			_hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next;
++		}
++		list_del_init(&_qh->qh_list_entry);
++	} else {
++		deschedule_periodic(_hcd, _qh);
++	}
++
++ done:
++	local_irq_restore(flags);
++}
++
++/**
++ * Defers a QH. For non-periodic QHs, removes the QH from the active
++ * non-periodic schedule. The QH is added to the deferred non-periodic
++ * schedule if any QTDs are still attached to the QH.
++ */
++int dwc_otg_hcd_qh_deferr(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh, int delay)
++{
++        int deact = 1;
++	unsigned long flags;
++	local_irq_save(flags);
++	if (dwc_qh_is_non_per(_qh)) {
++	        _qh->sched_frame =
++		  dwc_frame_num_inc(_hcd->frame_number,
++				    delay);
++		_qh->channel = NULL;
++		_qh->qtd_in_process = NULL;
++		deact = 0;
++		dwc_otg_hcd_qh_remove(_hcd, _qh);
++		if (!list_empty(&_qh->qtd_list)) {
++			/* Add back to deferred non-periodic schedule. */
++			dwc_otg_hcd_qh_add_deferred(_hcd, _qh);
++		}
++	}
++	local_irq_restore(flags);
++	return deact;
++}
++
++/**
++ * Deactivates a QH. For non-periodic QHs, removes the QH from the active
++ * non-periodic schedule. The QH is added to the inactive non-periodic
++ * schedule if any QTDs are still attached to the QH.
++ *
++ * For periodic QHs, the QH is removed from the periodic queued schedule. If
++ * there are any QTDs still attached to the QH, the QH is added to either the
++ * periodic inactive schedule or the periodic ready schedule and its next
++ * scheduled frame is calculated. The QH is placed in the ready schedule if
++ * the scheduled frame has been reached already. Otherwise it's placed in the
++ * inactive schedule. If there are no QTDs attached to the QH, the QH is
++ * completely removed from the periodic schedule.
++ */
++void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, int sched_next_periodic_split)
++{
++	unsigned long flags;
++	local_irq_save(flags);
++
++	if (dwc_qh_is_non_per(_qh)) {
++		dwc_otg_hcd_qh_remove(_hcd, _qh);
++		if (!list_empty(&_qh->qtd_list)) {
++			/* Add back to inactive non-periodic schedule. */
++			dwc_otg_hcd_qh_add(_hcd, _qh);
++		}
++	} else {
++		uint16_t frame_number =	dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(_hcd));
++
++		if (_qh->do_split) {
++			/* Schedule the next continuing periodic split transfer */
++			if (sched_next_periodic_split) {
++
++				_qh->sched_frame = frame_number;
++				if (dwc_frame_num_le(frame_number,
++						     dwc_frame_num_inc(_qh->start_split_frame, 1))) {
++					/*
++					 * Allow one frame to elapse after start
++					 * split microframe before scheduling
++					 * complete split, but DONT if we are
++					 * doing the next start split in the
++					 * same frame for an ISOC out.
++					 */
++					if ((_qh->ep_type != USB_ENDPOINT_XFER_ISOC) || (_qh->ep_is_in != 0)) {
++						_qh->sched_frame = dwc_frame_num_inc(_qh->sched_frame, 1);
++					}
++				}
++			} else {
++				_qh->sched_frame = dwc_frame_num_inc(_qh->start_split_frame,
++								     _qh->interval);
++				if (dwc_frame_num_le(_qh->sched_frame, frame_number)) {
++					_qh->sched_frame = frame_number;
++				}
++				_qh->sched_frame |= 0x7;
++				_qh->start_split_frame = _qh->sched_frame;
++			}
++		} else {
++			_qh->sched_frame = dwc_frame_num_inc(_qh->sched_frame, _qh->interval);
++			if (dwc_frame_num_le(_qh->sched_frame, frame_number)) {
++				_qh->sched_frame = frame_number;
++			}
++		}
++
++		if (list_empty(&_qh->qtd_list)) {
++			dwc_otg_hcd_qh_remove(_hcd, _qh);
++		} else {
++			/*
++			 * Remove from periodic_sched_queued and move to
++			 * appropriate queue.
++			 */
++			if (dwc_frame_num_le(_qh->sched_frame, frame_number)) {
++				list_move(&_qh->qh_list_entry,
++					  &_hcd->periodic_sched_ready);
++			} else {
++				list_move(&_qh->qh_list_entry,
++					  &_hcd->periodic_sched_inactive);
++			}
++		}
++	}
++
++	local_irq_restore(flags);
++}
++
++/** 
++ * This function allocates and initializes a QTD. 
++ *
++ * @param[in] _urb The URB to create a QTD from.  Each URB-QTD pair will end up
++ * pointing to each other so each pair should have a unique correlation.
++ *
++ * @return Returns pointer to the newly allocated QTD, or NULL on error. */
++dwc_otg_qtd_t *dwc_otg_hcd_qtd_create (struct urb *_urb)
++{
++	dwc_otg_qtd_t *qtd;
++
++	qtd = dwc_otg_hcd_qtd_alloc ();
++	if (qtd == NULL) {
++		return NULL;
++	}
++
++	dwc_otg_hcd_qtd_init (qtd, _urb);
++	return qtd;
++}
++
++/** 
++ * Initializes a QTD structure.
++ *
++ * @param[in] _qtd The QTD to initialize.
++ * @param[in] _urb The URB to use for initialization.  */
++void dwc_otg_hcd_qtd_init (dwc_otg_qtd_t *_qtd, struct urb *_urb)
++{
++	memset (_qtd, 0, sizeof (dwc_otg_qtd_t));
++	_qtd->urb = _urb;
++	if (usb_pipecontrol(_urb->pipe)) {
++		/*
++		 * The only time the QTD data toggle is used is on the data
++		 * phase of control transfers. This phase always starts with
++		 * DATA1.
++		 */
++		_qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
++		_qtd->control_phase = DWC_OTG_CONTROL_SETUP;
++	}
++
++	/* start split */
++	_qtd->complete_split = 0;
++	_qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
++	_qtd->isoc_split_offset = 0;
++
++	/* Store the qtd ptr in the urb to reference what QTD. */
++	_urb->hcpriv = _qtd;
++	return;
++}
++
++/**
++ * This function adds a QTD to the QTD-list of a QH.  It will find the correct
++ * QH to place the QTD into.  If it does not find a QH, then it will create a
++ * new QH. If the QH to which the QTD is added is not currently scheduled, it
++ * is placed into the proper schedule based on its EP type.
++ *
++ * @param[in] _qtd The QTD to add
++ * @param[in] _dwc_otg_hcd The DWC HCD structure
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * _qtd,  dwc_otg_hcd_t * _dwc_otg_hcd)
++{
++	struct usb_host_endpoint *ep;
++	dwc_otg_qh_t *qh;
++	unsigned long flags;
++	int retval = 0;
++	struct urb *urb = _qtd->urb;
++
++	local_irq_save(flags);
++
++	/*
++	 * Get the QH which holds the QTD-list to insert to. Create QH if it
++	 * doesn't exist.
++	 */
++	ep = dwc_urb_to_endpoint(urb);
++	qh = (dwc_otg_qh_t *)ep->hcpriv;
++	if (qh == NULL) {
++		qh = dwc_otg_hcd_qh_create (_dwc_otg_hcd, urb);
++		if (qh == NULL) {
++			retval = -1;
++			goto done;
++		}
++		ep->hcpriv = qh;
++	}
++
++	_qtd->qtd_qh_ptr = qh;
++	retval = dwc_otg_hcd_qh_add(_dwc_otg_hcd, qh);
++	if (retval == 0) {
++		list_add_tail(&_qtd->qtd_list_entry, &qh->qtd_list);
++	}
++
++ done:
++	local_irq_restore(flags);
++	return retval;
++}
++
++#endif /* DWC_DEVICE_ONLY */
+diff --git a/drivers/usb/dwc_otg/dwc_otg_ifx.c b/drivers/usb/dwc_otg/dwc_otg_ifx.c
+new file mode 100644
+index 0000000..0a4c209
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_ifx.c
+@@ -0,0 +1,100 @@
++/******************************************************************************
++**
++** FILE NAME    : dwc_otg_ifx.c
++** PROJECT      : Twinpass/Danube
++** MODULES      : DWC OTG USB
++**
++** DATE         : 12 Auguest 2007
++** AUTHOR       : Sung Winder
++** DESCRIPTION  : Platform specific initialization.
++** COPYRIGHT    :       Copyright (c) 2007
++**                      Infineon Technologies AG
++**                      2F, No.2, Li-Hsin Rd., Hsinchu Science Park,
++**                      Hsin-chu City, 300 Taiwan.
++**
++**    This program is free software; you can redistribute it and/or modify
++**    it under the terms of the GNU General Public License as published by
++**    the Free Software Foundation; either version 2 of the License, or
++**    (at your option) any later version.
++**
++** HISTORY
++** $Date             $Author         $Comment
++** 12 Auguest 2007   Sung Winder     Initiate Version
++*******************************************************************************/
++#include "dwc_otg_ifx.h"
++
++#include <linux/platform_device.h>
++#include <linux/kernel.h>
++#include <linux/ioport.h>
++#include <linux/gpio.h>
++
++#include <asm/io.h>
++//#include <asm/mach-ifxmips/ifxmips.h>
++#include <lantiq_soc.h>
++
++#define IFXMIPS_GPIO_BASE_ADDR  (0xBE100B00)
++
++#define IFXMIPS_GPIO_P0_OUT     ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0010))
++#define IFXMIPS_GPIO_P1_OUT     ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0040))
++#define IFXMIPS_GPIO_P0_IN      ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0014))
++#define IFXMIPS_GPIO_P1_IN      ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0044))
++#define IFXMIPS_GPIO_P0_DIR     ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0018))
++#define IFXMIPS_GPIO_P1_DIR     ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0048))
++#define IFXMIPS_GPIO_P0_ALTSEL0     ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x001C))
++#define IFXMIPS_GPIO_P1_ALTSEL0     ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x004C))
++#define IFXMIPS_GPIO_P0_ALTSEL1     ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0020))
++#define IFXMIPS_GPIO_P1_ALTSEL1     ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0050))
++#define IFXMIPS_GPIO_P0_OD      ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0024))
++#define IFXMIPS_GPIO_P1_OD      ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0054))
++#define IFXMIPS_GPIO_P0_STOFF       ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0028))
++#define IFXMIPS_GPIO_P1_STOFF       ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0058))
++#define IFXMIPS_GPIO_P0_PUDSEL      ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x002C))
++#define IFXMIPS_GPIO_P1_PUDSEL      ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x005C))
++#define IFXMIPS_GPIO_P0_PUDEN       ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0030))
++#define IFXMIPS_GPIO_P1_PUDEN       ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0060))
++
++
++#define writel ltq_w32
++#define readl ltq_r32
++void dwc_otg_power_on (void)
++{
++	// clear power
++	writel(readl(DANUBE_PMU_PWDCR) | 0x41, DANUBE_PMU_PWDCR);
++	// set clock gating
++	writel(readl(DANUBE_CGU_IFCCR) | 0x30, DANUBE_CGU_IFCCR);
++	// set power
++	writel(readl(DANUBE_PMU_PWDCR) & ~0x1, DANUBE_PMU_PWDCR);
++	writel(readl(DANUBE_PMU_PWDCR) & ~0x40, DANUBE_PMU_PWDCR);
++	writel(readl(DANUBE_PMU_PWDCR) & ~0x8000, DANUBE_PMU_PWDCR);
++
++#if 1//defined (DWC_HOST_ONLY)
++	// make the hardware be a host controller (default)
++	//clear_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_UBSCFG);
++	writel(readl(DANUBE_RCU_UBSCFG) & ~(1<<DANUBE_USBCFG_HDSEL_BIT), DANUBE_RCU_UBSCFG);
++
++	//#elif defined (DWC_DEVICE_ONLY)
++	/* set the controller to the device mode */
++	//    set_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_UBSCFG);
++#else
++#error  "For Danube/Twinpass, it should be HOST or Device Only."
++#endif
++
++	// set the HC's byte-order to big-endian
++	//set_bit (DANUBE_USBCFG_HOST_END_BIT, (volatile unsigned long *)DANUBE_RCU_UBSCFG);
++	writel(readl(DANUBE_RCU_UBSCFG) | (1<<DANUBE_USBCFG_HOST_END_BIT), DANUBE_RCU_UBSCFG);
++	//clear_bit (DANUBE_USBCFG_SLV_END_BIT, (volatile unsigned long *)DANUBE_RCU_UBSCFG);
++	writel(readl(DANUBE_RCU_UBSCFG) & ~(1<<DANUBE_USBCFG_SLV_END_BIT), DANUBE_RCU_UBSCFG);
++	//writel(0x400, DANUBE_RCU_UBSCFG);
++
++	// PHY configurations.
++	writel (0x14014, (volatile unsigned long *)0xbe10103c);
++}
++
++int ifx_usb_hc_init(unsigned long base_addr, int irq)
++{
++	return 0;
++}
++
++void ifx_usb_hc_remove(void)
++{
++}
+diff --git a/drivers/usb/dwc_otg/dwc_otg_ifx.h b/drivers/usb/dwc_otg/dwc_otg_ifx.h
+new file mode 100644
+index 0000000..402d7a6
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_ifx.h
+@@ -0,0 +1,85 @@
++/******************************************************************************
++**
++** FILE NAME    : dwc_otg_ifx.h
++** PROJECT      : Twinpass/Danube
++** MODULES      : DWC OTG USB
++**
++** DATE         : 12 April 2007
++** AUTHOR       : Sung Winder
++** DESCRIPTION  : Platform specific initialization.
++** COPYRIGHT    :       Copyright (c) 2007
++**                      Infineon Technologies AG
++**                      2F, No.2, Li-Hsin Rd., Hsinchu Science Park,
++**                      Hsin-chu City, 300 Taiwan.
++**
++**    This program is free software; you can redistribute it and/or modify
++**    it under the terms of the GNU General Public License as published by
++**    the Free Software Foundation; either version 2 of the License, or
++**    (at your option) any later version.
++**
++** HISTORY
++** $Date          $Author         $Comment
++** 12 April 2007   Sung Winder     Initiate Version
++*******************************************************************************/
++#if !defined(__DWC_OTG_IFX_H__)
++#define __DWC_OTG_IFX_H__
++
++#include <linux/irq.h>
++#include <irq.h>
++
++// 20070316, winder added.
++#ifndef SZ_256K
++#define SZ_256K                         0x00040000
++#endif
++
++extern void dwc_otg_power_on (void);
++
++/* FIXME: The current Linux-2.6 do not have these header files, but anyway, we need these. */
++// #include <asm/danube/danube.h>
++// #include <asm/ifx/irq.h>
++
++/* winder, I used the Danube parameter as default. *
++ * We could change this through module param.      */
++#define IFX_USB_IOMEM_BASE 0x1e101000
++#define IFX_USB_IOMEM_SIZE SZ_256K
++#define IFX_USB_IRQ LTQ_USB_INT
++
++/**
++ * This function is called to set correct clock gating and power.
++ * For Twinpass/Danube board.
++ */
++#ifndef DANUBE_RCU_BASE_ADDR
++#define DANUBE_RCU_BASE_ADDR            (0xBF203000)
++#endif
++
++#ifndef DANUBE_CGU
++#define DANUBE_CGU                          (0xBF103000)
++#endif
++#ifndef DANUBE_CGU_IFCCR
++/***CGU Interface Clock Control Register***/
++#define DANUBE_CGU_IFCCR                        ((volatile u32*)(DANUBE_CGU+ 0x0018))
++#endif
++
++#ifndef DANUBE_PMU
++#define DANUBE_PMU                              (KSEG1+0x1F102000)
++#endif
++#ifndef DANUBE_PMU_PWDCR
++/* PMU Power down Control Register */
++#define DANUBE_PMU_PWDCR                        ((volatile u32*)(DANUBE_PMU+0x001C))
++#endif
++
++
++#define DANUBE_RCU_UBSCFG  ((volatile u32*)(DANUBE_RCU_BASE_ADDR + 0x18))
++#define DANUBE_USBCFG_HDSEL_BIT    11	// 0:host, 1:device
++#define DANUBE_USBCFG_HOST_END_BIT 10	// 0:little_end, 1:big_end
++#define DANUBE_USBCFG_SLV_END_BIT  9	// 0:little_end, 1:big_end
++
++extern void ltq_mask_and_ack_irq(struct irq_data *d);
++
++static void inline mask_and_ack_ifx_irq(int x)
++{
++	struct irq_data d;
++	d.irq = x;
++	ltq_mask_and_ack_irq(&d);
++}
++#endif //__DWC_OTG_IFX_H__
+diff --git a/drivers/usb/dwc_otg/dwc_otg_plat.h b/drivers/usb/dwc_otg/dwc_otg_plat.h
+new file mode 100644
+index 0000000..727d0c4
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_plat.h
+@@ -0,0 +1,269 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/platform/dwc_otg_plat.h $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 510301 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_OTG_PLAT_H__)
++#define __DWC_OTG_PLAT_H__
++
++#include <linux/types.h>
++#include <linux/slab.h>
++#include <linux/list.h>
++#include <linux/delay.h>
++#include <asm/io.h>
++
++/**
++ * @file 
++ *
++ * This file contains the Platform Specific constants, interfaces
++ * (functions and macros) for Linux.
++ *
++ */
++/*#if !defined(__LINUX__)
++#error "The contents of this file is Linux specific!!!"
++#endif
++*/
++#include <lantiq_soc.h>
++#define writel ltq_w32
++#define readl ltq_r32
++
++/**
++ * Reads the content of a register.
++ *
++ * @param _reg address of register to read.
++ * @return contents of the register.
++ *
++
++ * Usage:<br>
++ * <code>uint32_t dev_ctl = dwc_read_reg32(&dev_regs->dctl);</code> 
++ */
++static __inline__ uint32_t dwc_read_reg32( volatile uint32_t *_reg) 
++{
++        return readl(_reg);
++};
++
++/** 
++ * Writes a register with a 32 bit value.
++ *
++ * @param _reg address of register to read.
++ * @param _value to write to _reg.
++ *
++ * Usage:<br>
++ * <code>dwc_write_reg32(&dev_regs->dctl, 0); </code>
++ */
++static __inline__ void dwc_write_reg32( volatile uint32_t *_reg, const uint32_t _value) 
++{
++        writel( _value, _reg );
++};
++
++/**  
++ * This function modifies bit values in a register.  Using the
++ * algorithm: (reg_contents & ~clear_mask) | set_mask.
++ *
++ * @param _reg address of register to read.
++ * @param _clear_mask bit mask to be cleared.
++ * @param _set_mask bit mask to be set.
++ *
++ * Usage:<br> 
++ * <code> // Clear the SOF Interrupt Mask bit and <br>
++ * // set the OTG Interrupt mask bit, leaving all others as they were.
++ *    dwc_modify_reg32(&dev_regs->gintmsk, DWC_SOF_INT, DWC_OTG_INT);</code>
++ */
++static __inline__
++ void dwc_modify_reg32( volatile uint32_t *_reg, const uint32_t _clear_mask, const uint32_t _set_mask) 
++{
++        writel( (readl(_reg) & ~_clear_mask) | _set_mask, _reg );  
++};
++
++
++/**
++ * Wrapper for the OS micro-second delay function.
++ * @param[in] _usecs Microseconds of delay
++ */
++static __inline__ void UDELAY( const uint32_t _usecs ) 
++{
++        udelay( _usecs );
++}
++
++/**
++ * Wrapper for the OS milli-second delay function.
++ * @param[in] _msecs milliseconds of delay
++ */
++static __inline__ void MDELAY( const uint32_t _msecs ) 
++{
++        mdelay( _msecs );
++}
++
++/**
++ * Wrapper for the Linux spin_lock.  On the ARM (Integrator)
++ * spin_lock() is a nop.
++ *
++ * @param _lock Pointer to the spinlock.
++ */
++static __inline__ void SPIN_LOCK( spinlock_t *_lock )  
++{
++        spin_lock(_lock);
++}
++
++/**
++ * Wrapper for the Linux spin_unlock.  On the ARM (Integrator)
++ * spin_lock() is a nop.
++ *
++ * @param _lock Pointer to the spinlock.
++ */
++static __inline__ void SPIN_UNLOCK( spinlock_t *_lock )     
++{ 
++        spin_unlock(_lock);
++}
++
++/**
++ * Wrapper (macro) for the Linux spin_lock_irqsave.  On the ARM
++ * (Integrator) spin_lock() is a nop.
++ *
++ * @param _l Pointer to the spinlock.
++ * @param _f unsigned long for irq flags storage.
++ */
++#define SPIN_LOCK_IRQSAVE( _l, _f )  { \
++	spin_lock_irqsave(_l,_f); \
++	}
++
++/**
++ * Wrapper (macro) for the Linux spin_unlock_irqrestore.  On the ARM
++ * (Integrator) spin_lock() is a nop.
++ *
++ * @param _l Pointer to the spinlock.
++ * @param _f unsigned long for irq flags storage.
++ */
++#define SPIN_UNLOCK_IRQRESTORE( _l,_f ) {\
++	spin_unlock_irqrestore(_l,_f); 	\
++	}
++
++
++/*
++ * Debugging support vanishes in non-debug builds.  
++ */
++
++
++/**
++ * The Debug Level bit-mask variable.
++ */
++extern uint32_t g_dbg_lvl;
++/**
++ * Set the Debug Level variable.
++ */
++static inline uint32_t SET_DEBUG_LEVEL( const uint32_t _new )
++{
++        uint32_t old = g_dbg_lvl;
++        g_dbg_lvl = _new;
++        return old;
++}
++
++/** When debug level has the DBG_CIL bit set, display CIL Debug messages. */
++#define DBG_CIL		(0x2)
++/** When debug level has the DBG_CILV bit set, display CIL Verbose debug
++ * messages */
++#define DBG_CILV	(0x20)
++/**  When debug level has the DBG_PCD bit set, display PCD (Device) debug
++ *  messages */
++#define DBG_PCD		(0x4)	
++/** When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug
++ * messages */
++#define DBG_PCDV	(0x40)	
++/** When debug level has the DBG_HCD bit set, display Host debug messages */
++#define DBG_HCD		(0x8)	
++/** When debug level has the DBG_HCDV bit set, display Verbose Host debug
++ * messages */
++#define DBG_HCDV	(0x80)
++/** When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host
++ *  mode. */
++#define DBG_HCD_URB	(0x800)
++
++/** When debug level has any bit set, display debug messages */
++#define DBG_ANY		(0xFF)
++
++/** All debug messages off */
++#define DBG_OFF		0
++
++/** Prefix string for DWC_DEBUG print macros. */
++#define USB_DWC "DWC_otg: "
++
++/** 
++ * Print a debug message when the Global debug level variable contains
++ * the bit defined in <code>lvl</code>.
++ *
++ * @param[in] lvl - Debug level, use one of the DBG_ constants above.
++ * @param[in] x - like printf
++ *
++ *    Example:<p>
++ * <code>
++ *      DWC_DEBUGPL( DBG_ANY, "%s(%p)\n", __func__, _reg_base_addr);
++ * </code>
++ * <br>
++ * results in:<br> 
++ * <code>
++ * usb-DWC_otg: dwc_otg_cil_init(ca867000)
++ * </code>
++ */
++#ifdef DEBUG
++
++# define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)printk( KERN_DEBUG USB_DWC x ); }while(0)
++# define DWC_DEBUGP(x...)	DWC_DEBUGPL(DBG_ANY, x )
++
++# define CHK_DEBUG_LEVEL(level) ((level) & g_dbg_lvl)
++
++#else
++
++# define DWC_DEBUGPL(lvl, x...) do{}while(0)
++# define DWC_DEBUGP(x...)
++
++# define CHK_DEBUG_LEVEL(level) (0)
++
++#endif /*DEBUG*/
++
++/**
++ * Print an Error message.
++ */
++#define DWC_ERROR(x...) printk( KERN_ERR USB_DWC x )
++/**
++ * Print a Warning message.
++ */
++#define DWC_WARN(x...) printk( KERN_WARNING USB_DWC x )
++/**
++ * Print a notice (normal but significant message).
++ */
++#define DWC_NOTICE(x...) printk( KERN_NOTICE USB_DWC x )
++/**
++ *  Basic message printing.
++ */
++#define DWC_PRINT(x...) printk( KERN_INFO USB_DWC x )
++
++#endif
++
+diff --git a/drivers/usb/dwc_otg/dwc_otg_regs.h b/drivers/usb/dwc_otg/dwc_otg_regs.h
+new file mode 100644
+index 0000000..397a954
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_regs.h
+@@ -0,0 +1,1797 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_regs.h $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 631780 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#ifndef __DWC_OTG_REGS_H__
++#define __DWC_OTG_REGS_H__
++
++/**
++ * @file
++ *
++ * This file contains the data structures for accessing the DWC_otg core registers.
++ *
++ * The application interfaces with the HS OTG core by reading from and
++ * writing to the Control and Status Register (CSR) space through the
++ * AHB Slave interface. These registers are 32 bits wide, and the
++ * addresses are 32-bit-block aligned.
++ * CSRs are classified as follows:
++ * - Core Global Registers
++ * - Device Mode Registers
++ * - Device Global Registers
++ * - Device Endpoint Specific Registers
++ * - Host Mode Registers
++ * - Host Global Registers
++ * - Host Port CSRs
++ * - Host Channel Specific Registers
++ *
++ * Only the Core Global registers can be accessed in both Device and
++ * Host modes. When the HS OTG core is operating in one mode, either
++ * Device or Host, the application must not access registers from the
++ * other mode. When the core switches from one mode to another, the
++ * registers in the new mode of operation must be reprogrammed as they
++ * would be after a power-on reset.
++ */
++
++/****************************************************************************/
++/** DWC_otg Core registers .  
++ * The dwc_otg_core_global_regs structure defines the size
++ * and relative field offsets for the Core Global registers.
++ */
++typedef struct dwc_otg_core_global_regs 
++{
++        /** OTG Control and Status Register.  <i>Offset: 000h</i> */
++        volatile uint32_t gotgctl; 
++        /** OTG Interrupt Register.  <i>Offset: 004h</i> */
++        volatile uint32_t gotgint; 
++        /**Core AHB Configuration Register.  <i>Offset: 008h</i> */
++        volatile uint32_t gahbcfg; 
++#define DWC_GLBINTRMASK 	0x0001
++#define DWC_DMAENABLE   	0x0020
++#define DWC_NPTXEMPTYLVL_EMPTY 	0x0080
++#define DWC_NPTXEMPTYLVL_HALFEMPTY 	0x0000
++#define DWC_PTXEMPTYLVL_EMPTY 	0x0100
++#define DWC_PTXEMPTYLVL_HALFEMPTY 	0x0000
++
++
++        /**Core USB Configuration Register.  <i>Offset: 00Ch</i> */
++        volatile uint32_t gusbcfg; 
++        /**Core Reset Register.  <i>Offset: 010h</i> */
++        volatile uint32_t grstctl; 
++        /**Core Interrupt Register.  <i>Offset: 014h</i> */
++        volatile uint32_t gintsts; 
++        /**Core Interrupt Mask Register.  <i>Offset: 018h</i> */
++        volatile uint32_t gintmsk; 
++        /**Receive Status Queue Read Register (Read Only).  <i>Offset: 01Ch</i> */
++        volatile uint32_t grxstsr; 
++        /**Receive Status Queue Read & POP Register (Read Only).  <i>Offset: 020h</i>*/
++        volatile uint32_t grxstsp; 
++        /**Receive FIFO Size Register.  <i>Offset: 024h</i> */
++        volatile uint32_t grxfsiz; 
++        /**Non Periodic Transmit FIFO Size Register.  <i>Offset: 028h</i> */
++        volatile uint32_t gnptxfsiz; 
++        /**Non Periodic Transmit FIFO/Queue Status Register (Read
++         * Only). <i>Offset: 02Ch</i> */
++        volatile uint32_t gnptxsts; 
++        /**I2C Access Register.  <i>Offset: 030h</i> */
++        volatile uint32_t gi2cctl; 
++        /**PHY Vendor Control Register.  <i>Offset: 034h</i> */
++        volatile uint32_t gpvndctl;
++        /**General Purpose Input/Output Register.  <i>Offset: 038h</i> */
++        volatile uint32_t ggpio; 
++        /**User ID Register.  <i>Offset: 03Ch</i> */
++        volatile uint32_t guid; 
++        /**Synopsys ID Register (Read Only).  <i>Offset: 040h</i> */
++        volatile uint32_t gsnpsid;
++        /**User HW Config1 Register (Read Only).  <i>Offset: 044h</i> */
++        volatile uint32_t ghwcfg1; 
++        /**User HW Config2 Register (Read Only).  <i>Offset: 048h</i> */
++        volatile uint32_t ghwcfg2;
++#define DWC_SLAVE_ONLY_ARCH 0
++#define DWC_EXT_DMA_ARCH 1
++#define DWC_INT_DMA_ARCH 2
++
++#define DWC_MODE_HNP_SRP_CAPABLE 	0
++#define DWC_MODE_SRP_ONLY_CAPABLE 	1
++#define DWC_MODE_NO_HNP_SRP_CAPABLE 	2
++#define DWC_MODE_SRP_CAPABLE_DEVICE 	3
++#define DWC_MODE_NO_SRP_CAPABLE_DEVICE  4
++#define DWC_MODE_SRP_CAPABLE_HOST 	5
++#define DWC_MODE_NO_SRP_CAPABLE_HOST  	6
++
++        /**User HW Config3 Register (Read Only).  <i>Offset: 04Ch</i> */
++        volatile uint32_t ghwcfg3;
++        /**User HW Config4 Register (Read Only).  <i>Offset: 050h</i>*/
++        volatile uint32_t ghwcfg4;
++        /** Reserved  <i>Offset: 054h-0FFh</i> */
++        uint32_t reserved[43];
++        /** Host Periodic Transmit FIFO Size Register. <i>Offset: 100h</i> */
++        volatile uint32_t hptxfsiz;
++	/** Device Periodic Transmit FIFO#n Register if dedicated fifos are disabled,
++		otherwise Device Transmit FIFO#n Register.
++         * <i>Offset: 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15 (1<=n<=15).</i> */
++        //volatile uint32_t dptxfsiz[15];
++	volatile uint32_t dptxfsiz_dieptxf[15];
++} dwc_otg_core_global_regs_t;
++
++/**
++ * This union represents the bit fields of the Core OTG Control
++ * and Status Register (GOTGCTL).  Set the bits using the bit 
++ * fields then write the <i>d32</i> value to the register.
++ */
++typedef union gotgctl_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct 
++        {
++		unsigned reserved31_21 : 11;
++		unsigned currmod : 1;
++		unsigned bsesvld : 1;
++		unsigned asesvld : 1;
++		unsigned reserved17 : 1;
++		unsigned conidsts : 1;
++		unsigned reserved15_12 : 4;
++		unsigned devhnpen : 1;
++		unsigned hstsethnpen : 1;
++		unsigned hnpreq : 1;
++		unsigned hstnegscs : 1;
++		unsigned reserved7_2 : 6;
++        unsigned sesreq : 1;
++        unsigned sesreqscs : 1;
++        } b;
++} gotgctl_data_t;
++
++/**
++ * This union represents the bit fields of the Core OTG Interrupt Register
++ * (GOTGINT).  Set/clear the bits using the bit fields then write the <i>d32</i>
++ * value to the register.
++ */
++typedef union gotgint_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct 
++        {
++		/** Current Mode */
++		unsigned reserved31_20 : 12;
++		/** Debounce Done */
++		unsigned debdone : 1;
++		/** A-Device Timeout Change */
++		unsigned adevtoutchng : 1;
++		/** Host Negotiation Detected */
++		unsigned hstnegdet : 1;
++		unsigned reserver16_10 : 7;
++		/** Host Negotiation Success Status Change */
++		unsigned hstnegsucstschng : 1;
++		/** Session Request Success Status Change */
++		unsigned sesreqsucstschng : 1;
++		unsigned reserved3_7 : 5;
++		/** Session End Detected */
++		unsigned sesenddet : 1;
++		/** Current Mode */
++		unsigned reserved1_0 : 2;
++        } b;
++} gotgint_data_t;
++
++
++/**
++ * This union represents the bit fields of the Core AHB Configuration
++ * Register (GAHBCFG).  Set/clear the bits using the bit fields then
++ * write the <i>d32</i> value to the register.
++ */
++typedef union gahbcfg_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct 
++        {
++#define DWC_GAHBCFG_TXFEMPTYLVL_EMPTY 		1
++#define DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY	0
++                unsigned reserved9_31 : 23;
++                unsigned ptxfemplvl : 1;
++                unsigned nptxfemplvl_txfemplvl : 1;
++#define DWC_GAHBCFG_DMAENABLE   		1
++                unsigned reserved : 1;
++                unsigned dmaenable : 1;
++#define DWC_GAHBCFG_INT_DMA_BURST_SINGLE 	0
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR 		1
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR4 	3
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR8 	5
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR16 	7
++                unsigned hburstlen : 4;
++                unsigned glblintrmsk : 1;
++#define DWC_GAHBCFG_GLBINT_ENABLE 		1
++
++        } b;
++} gahbcfg_data_t;
++
++/**
++ * This union represents the bit fields of the Core USB Configuration
++ * Register (GUSBCFG).  Set the bits using the bit fields then write
++ * the <i>d32</i> value to the register.
++ */
++typedef union gusbcfg_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct 
++        {
++	unsigned corrupt_tx_packet: 1;		/*fscz*/
++		unsigned force_device_mode: 1;
++		unsigned force_host_mode: 1;
++		unsigned reserved23_28 : 6;
++		unsigned term_sel_dl_pulse : 1;
++                unsigned ulpi_int_vbus_indicator : 1;
++                unsigned ulpi_ext_vbus_drv : 1;
++		unsigned ulpi_clk_sus_m : 1;
++		unsigned ulpi_auto_res : 1;
++		unsigned ulpi_fsls : 1;
++                unsigned otgutmifssel : 1;
++                unsigned phylpwrclksel : 1;
++                unsigned nptxfrwnden : 1;
++                unsigned usbtrdtim : 4;
++                unsigned hnpcap : 1;
++                unsigned srpcap : 1;
++                unsigned ddrsel : 1;
++                unsigned physel : 1;
++                unsigned fsintf : 1;
++                unsigned ulpi_utmi_sel : 1;
++                unsigned phyif : 1;
++                unsigned toutcal : 3;
++        } b;
++} gusbcfg_data_t;
++
++/**
++ * This union represents the bit fields of the Core Reset Register
++ * (GRSTCTL).  Set/clear the bits using the bit fields then write the
++ * <i>d32</i> value to the register.
++ */
++typedef union grstctl_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct 
++        {
++                /** AHB Master Idle.  Indicates the AHB Master State
++                 * Machine is in IDLE condition. */
++                unsigned ahbidle : 1;                
++                /** DMA Request Signal.  Indicated DMA request is in
++                 * probress.  Used for debug purpose. */
++                unsigned dmareq : 1;
++                /** Reserved */
++			unsigned reserved29_11 : 19;
++                /** TxFIFO Number (TxFNum) (Device and Host).
++                 * 
++                 * This is the FIFO number which needs to be flushed,
++                 * using the TxFIFO Flush bit. This field should not
++                 * be changed until the TxFIFO Flush bit is cleared by
++                 * the core.
++                 *   - 0x0 : Non Periodic TxFIFO Flush
++                 *   - 0x1 : Periodic TxFIFO #1 Flush in device mode
++                 *     or Periodic TxFIFO in host mode
++                 *   - 0x2 : Periodic TxFIFO #2 Flush in device mode.
++                 *   - ...
++                 *   - 0xF : Periodic TxFIFO #15 Flush in device mode
++                 *   - 0x10: Flush all the Transmit NonPeriodic and
++                 *     Transmit Periodic FIFOs in the core
++                 */
++                unsigned txfnum : 5;
++                /** TxFIFO Flush (TxFFlsh) (Device and Host).  
++                 *
++                 * This bit is used to selectively flush a single or
++                 * all transmit FIFOs.  The application must first
++                 * ensure that the core is not in the middle of a
++                 * transaction.  <p>The application should write into
++                 * this bit, only after making sure that neither the
++                 * DMA engine is writing into the TxFIFO nor the MAC
++                 * is reading the data out of the FIFO.  <p>The
++                 * application should wait until the core clears this
++                 * bit, before performing any operations. This bit
++                 * will takes 8 clocks (slowest of PHY or AHB clock)
++                 * to clear.
++                 */
++                unsigned txfflsh : 1;
++                /** RxFIFO Flush (RxFFlsh) (Device and Host)
++                 *
++                 * The application can flush the entire Receive FIFO
++                 * using this bit.  <p>The application must first
++                 * ensure that the core is not in the middle of a
++                 * transaction.  <p>The application should write into
++                 * this bit, only after making sure that neither the
++                 * DMA engine is reading from the RxFIFO nor the MAC
++                 * is writing the data in to the FIFO.  <p>The
++                 * application should wait until the bit is cleared
++                 * before performing any other operations. This bit
++                 * will takes 8 clocks (slowest of PHY or AHB clock)
++                 * to clear.
++                 */
++                unsigned rxfflsh : 1;
++                /** In Token Sequence Learning Queue Flush
++                 * (INTknQFlsh) (Device Only)
++                 */
++                unsigned intknqflsh : 1;
++                /** Host Frame Counter Reset (Host Only)<br>
++                 * 
++                 * The application can reset the (micro)frame number
++                 * counter inside the core, using this bit. When the
++                 * (micro)frame counter is reset, the subsequent SOF
++                 * sent out by the core, will have a (micro)frame
++                 * number of 0.
++                 */
++                unsigned hstfrm : 1;
++                /** Hclk Soft Reset
++		 *
++		 * The application uses this bit to reset the control logic in
++		 * the AHB clock domain. Only AHB clock domain pipelines are
++		 * reset.
++		 */
++                unsigned hsftrst : 1;
++                /** Core Soft Reset (CSftRst) (Device and Host)
++                 *
++                 * The application can flush the control logic in the
++                 * entire core using this bit. This bit resets the
++                 * pipelines in the AHB Clock domain as well as the
++                 * PHY Clock domain.
++                 *
++                 * The state machines are reset to an IDLE state, the
++                 * control bits in the CSRs are cleared, all the
++                 * transmit FIFOs and the receive FIFO are flushed.
++                 *
++                 * The status mask bits that control the generation of
++                 * the interrupt, are cleared, to clear the
++                 * interrupt. The interrupt status bits are not
++                 * cleared, so the application can get the status of
++                 * any events that occurred in the core after it has
++                 * set this bit.
++                 *
++                 * Any transactions on the AHB are terminated as soon
++                 * as possible following the protocol. Any
++                 * transactions on the USB are terminated immediately.
++                 *
++                 * The configuration settings in the CSRs are
++                 * unchanged, so the software doesn't have to
++                 * reprogram these registers (Device
++                 * Configuration/Host Configuration/Core System
++                 * Configuration/Core PHY Configuration).
++                 *
++                 * The application can write to this bit, any time it
++                 * wants to reset the core. This is a self clearing
++                 * bit and the core clears this bit after all the
++                 * necessary logic is reset in the core, which may
++                 * take several clocks, depending on the current state
++                 * of the core.
++                 */
++                unsigned csftrst : 1;
++        } b;
++} grstctl_t;
++
++
++/**
++ * This union represents the bit fields of the Core Interrupt Mask
++ * Register (GINTMSK).  Set/clear the bits using the bit fields then
++ * write the <i>d32</i> value to the register.
++ */
++typedef union gintmsk_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct 
++        {
++                unsigned wkupintr : 1;
++                unsigned sessreqintr : 1;
++                unsigned disconnect : 1;
++                unsigned conidstschng : 1;
++                unsigned reserved27 : 1;
++                unsigned ptxfempty : 1;
++                unsigned hcintr : 1;
++                unsigned portintr : 1;
++                unsigned reserved22_23 : 2;
++                unsigned incomplisoout : 1;
++                unsigned incomplisoin : 1;
++                unsigned outepintr : 1;
++                unsigned inepintr : 1;
++                unsigned epmismatch : 1;
++                unsigned reserved16 : 1;
++                unsigned eopframe : 1;
++                unsigned isooutdrop : 1;
++                unsigned enumdone : 1;
++                unsigned usbreset : 1;
++                unsigned usbsuspend : 1;
++                unsigned erlysuspend : 1;
++                unsigned i2cintr : 1;
++                unsigned reserved8 : 1;
++                unsigned goutnakeff : 1;
++                unsigned ginnakeff : 1;
++                unsigned nptxfempty : 1;
++                unsigned rxstsqlvl : 1;
++                unsigned sofintr : 1;
++                unsigned otgintr : 1;
++                unsigned modemismatch : 1;
++                unsigned reserved0 : 1;
++        } b;
++} gintmsk_data_t;
++/**
++ * This union represents the bit fields of the Core Interrupt Register
++ * (GINTSTS).  Set/clear the bits using the bit fields then write the
++ * <i>d32</i> value to the register.
++ */
++typedef union gintsts_data
++{
++        /** raw register data */
++        uint32_t d32;
++#define DWC_SOF_INTR_MASK 0x0008
++        /** register bits */
++        struct 
++        {
++#define DWC_HOST_MODE 1
++                unsigned wkupintr : 1;
++                unsigned sessreqintr : 1;
++                unsigned disconnect : 1;
++                unsigned conidstschng : 1;
++                unsigned reserved27 : 1;
++                unsigned ptxfempty : 1;
++                unsigned hcintr : 1;
++                unsigned portintr : 1;
++                unsigned reserved22_23 : 2;
++                unsigned incomplisoout : 1;
++                unsigned incomplisoin : 1;
++                unsigned outepintr : 1;
++                unsigned inepint: 1;
++                unsigned epmismatch : 1;
++                unsigned intokenrx : 1;
++                unsigned eopframe : 1;
++                unsigned isooutdrop : 1;
++                unsigned enumdone : 1;
++                unsigned usbreset : 1;
++                unsigned usbsuspend : 1;
++                unsigned erlysuspend : 1;
++                unsigned i2cintr : 1;
++                unsigned reserved8 : 1;
++                unsigned goutnakeff : 1;
++                unsigned ginnakeff : 1;
++                unsigned nptxfempty : 1;
++                unsigned rxstsqlvl : 1;
++                unsigned sofintr : 1;
++                unsigned otgintr : 1;
++                unsigned modemismatch : 1;
++                unsigned curmode : 1;
++        } b;
++} gintsts_data_t;
++
++
++/**
++ * This union represents the bit fields in the Device Receive Status Read and 
++ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i> 
++ * element then read out the bits using the <i>b</i>it elements.
++ */
++typedef union device_grxsts_data {
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++	struct {
++	  unsigned reserved : 7;
++	  unsigned fn : 4;
++#define DWC_STS_DATA_UPDT   	0x2               // OUT Data Packet
++#define DWC_STS_XFER_COMP   	0x3               // OUT Data Transfer Complete
++
++#define DWC_DSTS_GOUT_NAK   	0x1               // Global OUT NAK
++#define DWC_DSTS_SETUP_COMP 	0x4               // Setup Phase Complete
++#define DWC_DSTS_SETUP_UPDT	0x6               // SETUP Packet
++	  unsigned pktsts : 4;
++	  unsigned dpid : 2;
++	  unsigned bcnt : 11;
++	  unsigned epnum : 4;
++        } b;
++} device_grxsts_data_t;
++
++/**
++ * This union represents the bit fields in the Host Receive Status Read and 
++ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i> 
++ * element then read out the bits using the <i>b</i>it elements.
++ */
++typedef union host_grxsts_data {
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++	struct {
++	  unsigned reserved31_21 : 11;
++#define DWC_GRXSTS_PKTSTS_IN              0x2
++#define DWC_GRXSTS_PKTSTS_IN_XFER_COMP    0x3
++#define DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR 0x5
++#define DWC_GRXSTS_PKTSTS_CH_HALTED       0x7
++	  unsigned pktsts : 4;
++	  unsigned dpid : 2;
++	  unsigned bcnt : 11;
++	  unsigned chnum : 4;
++        } b;
++} host_grxsts_data_t;
++
++/**
++ * This union represents the bit fields in the FIFO Size Registers (HPTXFSIZ,
++ * GNPTXFSIZ, DPTXFSIZn). Read the register into the <i>d32</i> element then
++ * read out the bits using the <i>b</i>it elements.
++ */
++typedef union fifosize_data {
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++	struct {
++		unsigned depth : 16;
++		unsigned startaddr : 16;
++        } b;
++} fifosize_data_t;
++
++/**
++ * This union represents the bit fields in the Non-Periodic Transmit
++ * FIFO/Queue Status Register (GNPTXSTS). Read the register into the
++ * <i>d32</i> element then read out the bits using the <i>b</i>it
++ * elements.
++ */
++typedef union gnptxsts_data {
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++	struct {
++                unsigned reserved : 1;
++                /** Top of the Non-Periodic Transmit Request Queue 
++                 *  - bits 30:27 - Channel/EP Number
++                 *  - bits 26:25 - Token Type 
++                 *  - bit 24 - Terminate (Last entry for the selected
++                 *    channel/EP)
++                 *    - 2'b00 - IN/OUT
++                 *    - 2'b01 - Zero Length OUT
++                 *    - 2'b10 - PING/Complete Split
++                 *    - 2'b11 - Channel Halt
++
++                 */
++                unsigned nptxqtop_chnep : 4;
++                unsigned nptxqtop_token : 2;
++                unsigned nptxqtop_terminate : 1;
++		unsigned nptxqspcavail : 8;
++		unsigned nptxfspcavail : 16;
++        } b;
++} gnptxsts_data_t;
++
++/**
++ * This union represents the bit fields in the Transmit
++ * FIFO Status Register (DTXFSTS). Read the register into the
++ * <i>d32</i> element then read out the bits using the <i>b</i>it
++ * elements.
++ */
++typedef union dtxfsts_data 	/* fscz */	 //*
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned reserved : 16;
++		unsigned txfspcavail : 16;
++	} b;
++} dtxfsts_data_t;
++
++/**
++ * This union represents the bit fields in the I2C Control Register
++ * (I2CCTL). Read the register into the <i>d32</i> element then read out the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union gi2cctl_data {
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++	struct {
++		unsigned bsydne : 1;
++		unsigned rw : 1;
++		unsigned reserved : 2;
++		unsigned i2cdevaddr : 2;
++		unsigned i2csuspctl : 1;
++		unsigned ack : 1;
++		unsigned i2cen : 1;
++		unsigned addr : 7;
++		unsigned regaddr : 8;
++		unsigned rwdata : 8;
++        } b;
++} gi2cctl_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config1
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg1_data {
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct {
++                unsigned ep_dir15 : 2;
++                unsigned ep_dir14 : 2;
++                unsigned ep_dir13 : 2;
++                unsigned ep_dir12 : 2;
++                unsigned ep_dir11 : 2;
++                unsigned ep_dir10 : 2;
++                unsigned ep_dir9 : 2;
++                unsigned ep_dir8 : 2;
++                unsigned ep_dir7 : 2;
++                unsigned ep_dir6 : 2;
++                unsigned ep_dir5 : 2;
++                unsigned ep_dir4 : 2;
++                unsigned ep_dir3 : 2;
++                unsigned ep_dir2 : 2;
++                unsigned ep_dir1 : 2;
++                unsigned ep_dir0 : 2;
++        } b;
++} hwcfg1_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config2
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg2_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct {
++                /* GHWCFG2 */
++                unsigned reserved31 : 1;
++                unsigned dev_token_q_depth : 5;
++                unsigned host_perio_tx_q_depth : 2;
++                unsigned nonperio_tx_q_depth : 2;
++                unsigned rx_status_q_depth : 2;
++                unsigned dynamic_fifo : 1;
++                unsigned perio_ep_supported : 1;
++                unsigned num_host_chan : 4;
++                unsigned num_dev_ep : 4;
++                unsigned fs_phy_type : 2;
++#define DWC_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0
++#define DWC_HWCFG2_HS_PHY_TYPE_UTMI 1
++#define DWC_HWCFG2_HS_PHY_TYPE_ULPI 2
++#define DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3
++                unsigned hs_phy_type : 2;
++                unsigned point2point : 1;
++                unsigned architecture : 2;
++#define DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0
++#define DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1
++#define DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2
++#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3
++#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4
++#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5
++#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6
++                unsigned op_mode : 3;
++        } b;
++} hwcfg2_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config3
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg3_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct {
++                /* GHWCFG3 */
++                unsigned dfifo_depth : 16;
++                unsigned reserved15_13 : 3;
++                unsigned ahb_phy_clock_synch : 1;
++                unsigned synch_reset_type : 1;
++                unsigned optional_features : 1;
++                unsigned vendor_ctrl_if : 1;
++                unsigned i2c : 1;
++                unsigned otg_func : 1;
++                unsigned packet_size_cntr_width : 3;
++                unsigned xfer_size_cntr_width : 4;
++        } b;
++} hwcfg3_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config4
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg4_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct {
++unsigned reserved31_30 : 2;	/* fscz */
++		unsigned num_in_eps : 4;
++		unsigned ded_fifo_en : 1;
++
++                unsigned session_end_filt_en : 1;                
++                unsigned b_valid_filt_en : 1;                
++                unsigned a_valid_filt_en : 1;
++                unsigned vbus_valid_filt_en : 1;
++                unsigned iddig_filt_en : 1;
++                unsigned num_dev_mode_ctrl_ep : 4;
++                unsigned utmi_phy_data_width : 2;
++                unsigned min_ahb_freq : 9;
++                unsigned power_optimiz : 1;
++                unsigned num_dev_perio_in_ep : 4;
++        } b;
++} hwcfg4_data_t;
++
++////////////////////////////////////////////
++// Device Registers
++/**
++ * Device Global Registers. <i>Offsets 800h-BFFh</i>
++ *
++ * The following structures define the size and relative field offsets
++ * for the Device Mode Registers.
++ *
++ * <i>These registers are visible only in Device mode and must not be
++ * accessed in Host mode, as the results are unknown.</i>
++ */
++typedef struct dwc_otg_dev_global_regs 
++{
++        /** Device Configuration Register. <i>Offset 800h</i> */
++        volatile uint32_t dcfg; 
++        /** Device Control Register. <i>Offset: 804h</i> */
++        volatile uint32_t dctl; 
++        /** Device Status Register (Read Only). <i>Offset: 808h</i> */
++        volatile uint32_t dsts; 
++        /** Reserved. <i>Offset: 80Ch</i> */
++        uint32_t unused;      	
++        /** Device IN Endpoint Common Interrupt Mask
++         * Register. <i>Offset: 810h</i> */
++        volatile uint32_t diepmsk; 
++        /** Device OUT Endpoint Common Interrupt Mask
++         * Register. <i>Offset: 814h</i> */
++        volatile uint32_t doepmsk; 	
++        /** Device All Endpoints Interrupt Register.  <i>Offset: 818h</i> */
++        volatile uint32_t daint; 	
++        /** Device All Endpoints Interrupt Mask Register.  <i>Offset:
++         * 81Ch</i> */
++        volatile uint32_t daintmsk; 
++        /** Device IN Token Queue Read Register-1 (Read Only).
++         * <i>Offset: 820h</i> */
++        volatile uint32_t dtknqr1; 	
++        /** Device IN Token Queue Read Register-2 (Read Only).
++         * <i>Offset: 824h</i> */ 
++        volatile uint32_t dtknqr2; 	
++        /** Device VBUS  discharge Register.  <i>Offset: 828h</i> */
++        volatile uint32_t dvbusdis; 	
++        /** Device VBUS Pulse Register.  <i>Offset: 82Ch</i> */
++        volatile uint32_t dvbuspulse;
++        /** Device IN Token Queue Read Register-3 (Read Only).
++    	 *  Device Thresholding control register (Read/Write)
++	 * <i>Offset: 830h</i> */
++	    volatile uint32_t dtknqr3_dthrctl;
++    	/** Device IN Token Queue Read Register-4 (Read Only). /
++	 *  Device IN EPs empty Inr. Mask Register (Read/Write)
++         * <i>Offset: 834h</i> */ 
++	    volatile uint32_t dtknqr4_fifoemptymsk;
++} dwc_otg_device_global_regs_t; 
++
++/**
++ * This union represents the bit fields in the Device Configuration
++ * Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.  Write the
++ * <i>d32</i> member to the dcfg register.
++ */
++typedef union dcfg_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct {
++                unsigned reserved31_23 : 9;
++                /** In Endpoint Mis-match count */
++                unsigned epmscnt : 5;
++                unsigned reserved13_17 : 5;
++                /** Periodic Frame Interval */
++#define DWC_DCFG_FRAME_INTERVAL_80 0
++#define DWC_DCFG_FRAME_INTERVAL_85 1
++#define DWC_DCFG_FRAME_INTERVAL_90 2
++#define DWC_DCFG_FRAME_INTERVAL_95 3
++                unsigned perfrint : 2;
++                /** Device Addresses */
++                unsigned devaddr : 7;
++                unsigned reserved3 : 1;
++                /** Non Zero Length Status OUT Handshake */
++#define DWC_DCFG_SEND_STALL 1
++                unsigned nzstsouthshk : 1;
++                /** Device Speed */
++                unsigned devspd : 2;
++        } b;
++} dcfg_data_t;
++
++/**
++ * This union represents the bit fields in the Device Control
++ * Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union dctl_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned reserved : 20;
++		/** Power-On Programming Done */
++		unsigned pwronprgdone : 1;
++		/** Clear Global OUT NAK */
++		unsigned cgoutnak : 1;
++		/** Set Global OUT NAK */
++		unsigned sgoutnak : 1;
++		/** Clear Global Non-Periodic IN NAK */
++		unsigned cgnpinnak : 1;
++		/** Set Global Non-Periodic IN NAK */
++		unsigned sgnpinnak : 1;
++		/** Test Control */
++		unsigned tstctl : 3;
++		/** Global OUT NAK Status */
++		unsigned goutnaksts : 1;
++		/** Global Non-Periodic IN NAK Status */
++		unsigned gnpinnaksts : 1;
++		/** Soft Disconnect */
++		unsigned sftdiscon : 1;
++		/** Remote Wakeup */
++		unsigned rmtwkupsig : 1;
++	} b;
++} dctl_data_t;
++
++/**
++ * This union represents the bit fields in the Device Status
++ * Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union dsts_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned reserved22_31 : 10;
++		/** Frame or Microframe Number of the received SOF */
++		unsigned soffn : 14;
++		unsigned reserved4_7: 4;
++		/** Erratic Error */
++		unsigned errticerr : 1;
++		/** Enumerated Speed */
++#define DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0
++#define DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1
++#define DWC_DSTS_ENUMSPD_LS_PHY_6MHZ           2
++#define DWC_DSTS_ENUMSPD_FS_PHY_48MHZ          3
++		unsigned enumspd : 2;
++		/** Suspend Status */
++		unsigned suspsts : 1;
++        } b;
++} dsts_data_t;
++
++
++/**
++ * This union represents the bit fields in the Device IN EP Interrupt
++ * Register and the Device IN EP Common Mask Register.
++ *
++ * - Read the register into the <i>d32</i> member then set/clear the
++ *   bits using the <i>b</i>it elements.
++ */
++typedef union diepint_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned reserved07_31 : 23;
++		unsigned txfifoundrn : 1;
++		/** IN Endpoint HAK Effective mask */
++        unsigned emptyintr : 1;
++		/** IN Endpoint NAK Effective mask */
++		unsigned inepnakeff : 1;
++		/** IN Token Received with EP mismatch mask */
++		unsigned intknepmis : 1;
++		/** IN Token received with TxF Empty mask */
++		unsigned intktxfemp : 1;
++		/** TimeOUT Handshake mask (non-ISOC EPs) */
++		unsigned timeout : 1;
++		/** AHB Error mask */
++		unsigned ahberr : 1;
++		/** Endpoint disable mask */
++		unsigned epdisabled : 1;
++		/** Transfer complete mask */
++		unsigned xfercompl : 1;
++        } b;
++} diepint_data_t;
++/**
++ * This union represents the bit fields in the Device IN EP Common
++ * Interrupt Mask Register.
++ */
++typedef union diepint_data diepmsk_data_t;
++
++/**
++ * This union represents the bit fields in the Device OUT EP Interrupt
++ * Registerand Device OUT EP Common Interrupt Mask Register.
++ *
++ * - Read the register into the <i>d32</i> member then set/clear the
++ *   bits using the <i>b</i>it elements.
++ */
++typedef union doepint_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned reserved04_31 : 27;
++		/** OUT Token Received when Endpoint Disabled */
++		unsigned outtknepdis : 1;
++		/** Setup Phase Done (contorl EPs) */
++		unsigned setup : 1;
++		/** AHB Error */
++		unsigned ahberr : 1;
++		/** Endpoint disable  */
++		unsigned epdisabled : 1;
++		/** Transfer complete */
++		unsigned xfercompl : 1;
++        } b;
++} doepint_data_t;
++/**
++ * This union represents the bit fields in the Device OUT EP Common
++ * Interrupt Mask Register.
++ */
++typedef union doepint_data doepmsk_data_t;
++
++
++/**
++ * This union represents the bit fields in the Device All EP Interrupt
++ * and Mask Registers.
++ * - Read the register into the <i>d32</i> member then set/clear the
++ *   bits using the <i>b</i>it elements.
++ */
++typedef union daint_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** OUT Endpoint bits */
++		unsigned out : 16;
++		/** IN Endpoint bits */
++		unsigned in : 16;
++        } ep;
++	struct {
++		/** OUT Endpoint bits */
++		unsigned outep15 : 1;
++		unsigned outep14 : 1;
++		unsigned outep13 : 1;
++		unsigned outep12 : 1;
++		unsigned outep11 : 1;
++		unsigned outep10 : 1;
++		unsigned outep9  : 1;
++		unsigned outep8  : 1;
++		unsigned outep7  : 1;
++		unsigned outep6  : 1;
++		unsigned outep5  : 1;
++		unsigned outep4  : 1;
++		unsigned outep3  : 1;
++		unsigned outep2  : 1;
++		unsigned outep1  : 1;
++		unsigned outep0  : 1;
++		/** IN Endpoint bits */
++		unsigned inep15 : 1;
++		unsigned inep14 : 1;
++		unsigned inep13 : 1;
++		unsigned inep12 : 1;
++		unsigned inep11 : 1;
++		unsigned inep10 : 1;
++		unsigned inep9  : 1;
++		unsigned inep8  : 1;
++		unsigned inep7  : 1;
++		unsigned inep6  : 1;
++		unsigned inep5  : 1;
++		unsigned inep4  : 1;
++		unsigned inep3  : 1;
++		unsigned inep2  : 1;
++		unsigned inep1  : 1;
++		unsigned inep0  : 1;
++        } b;
++} daint_data_t;
++
++/**
++ * This union represents the bit fields in the Device IN Token Queue
++ * Read Registers.
++ * - Read the register into the <i>d32</i> member.
++ * - READ-ONLY Register
++ */
++typedef union dtknq1_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct {
++                /** EP Numbers of IN Tokens 0 ... 4 */
++                unsigned epnums0_5 : 24;
++                /** write pointer has wrapped. */
++                unsigned wrap_bit : 1;
++                /** Reserved */
++                unsigned reserved05_06 : 2;
++                /** In Token Queue Write Pointer */
++                unsigned intknwptr : 5;
++        }b;
++} dtknq1_data_t;
++
++/**
++ * This union represents Threshold control Register
++ * - Read and write the register into the <i>d32</i> member.
++ * - READ-WRITABLE Register
++ */
++typedef union dthrctl_data			//* /*fscz */
++{
++    /** raw register data */
++    uint32_t d32;
++    /** register bits */
++    struct {
++        /** Reserved */
++        unsigned reserved26_31 : 6;
++        /** Rx Thr. Length */
++        unsigned rx_thr_len : 9;
++        /** Rx Thr. Enable */
++        unsigned rx_thr_en : 1;
++        /** Reserved */
++        unsigned reserved11_15 : 5;
++        /** Tx Thr. Length */
++        unsigned tx_thr_len : 9;
++        /** ISO Tx Thr. Enable */
++        unsigned iso_thr_en : 1;
++        /** non ISO Tx Thr. Enable */
++        unsigned non_iso_thr_en : 1;
++
++    }b;
++} dthrctl_data_t;
++
++/**
++ * Device Logical IN Endpoint-Specific Registers. <i>Offsets
++ * 900h-AFCh</i>
++ *
++ * There will be one set of endpoint registers per logical endpoint
++ * implemented.
++ *
++ * <i>These registers are visible only in Device mode and must not be
++ * accessed in Host mode, as the results are unknown.</i>
++ */
++typedef struct dwc_otg_dev_in_ep_regs 
++{
++        /** Device IN Endpoint Control Register. <i>Offset:900h +
++         * (ep_num * 20h) + 00h</i> */
++        volatile uint32_t diepctl;
++        /** Reserved. <i>Offset:900h + (ep_num * 20h) + 04h</i> */
++        uint32_t reserved04;    
++        /** Device IN Endpoint Interrupt Register. <i>Offset:900h +
++         * (ep_num * 20h) + 08h</i> */
++        volatile uint32_t diepint; 
++        /** Reserved. <i>Offset:900h + (ep_num * 20h) + 0Ch</i> */
++        uint32_t reserved0C;    
++        /** Device IN Endpoint Transfer Size
++         * Register. <i>Offset:900h + (ep_num * 20h) + 10h</i> */
++        volatile uint32_t dieptsiz; 
++        /** Device IN Endpoint DMA Address Register. <i>Offset:900h +
++         * (ep_num * 20h) + 14h</i> */
++        volatile uint32_t diepdma; 
++        /** Reserved. <i>Offset:900h + (ep_num * 20h) + 18h - 900h +
++         * (ep_num * 20h) + 1Ch</i>*/
++	    volatile uint32_t dtxfsts;
++    	/** Reserved. <i>Offset:900h + (ep_num * 20h) + 1Ch - 900h +
++	     * (ep_num * 20h) + 1Ch</i>*/
++    	uint32_t reserved18;
++} dwc_otg_dev_in_ep_regs_t;
++
++/**
++ * Device Logical OUT Endpoint-Specific Registers. <i>Offsets:
++ * B00h-CFCh</i>
++ *
++ * There will be one set of endpoint registers per logical endpoint
++ * implemented.
++ *
++ * <i>These registers are visible only in Device mode and must not be
++ * accessed in Host mode, as the results are unknown.</i>
++ */
++typedef struct dwc_otg_dev_out_ep_regs 
++{
++        /** Device OUT Endpoint Control Register. <i>Offset:B00h +
++         * (ep_num * 20h) + 00h</i> */
++        volatile uint32_t doepctl; 
++        /** Device OUT Endpoint Frame number Register.  <i>Offset:
++         * B00h + (ep_num * 20h) + 04h</i> */ 
++        volatile uint32_t doepfn; 
++        /** Device OUT Endpoint Interrupt Register. <i>Offset:B00h +
++         * (ep_num * 20h) + 08h</i> */
++        volatile uint32_t doepint; 
++        /** Reserved. <i>Offset:B00h + (ep_num * 20h) + 0Ch</i> */
++        uint32_t reserved0C;    
++        /** Device OUT Endpoint Transfer Size Register. <i>Offset:
++         * B00h + (ep_num * 20h) + 10h</i> */
++        volatile uint32_t doeptsiz; 
++        /** Device OUT Endpoint DMA Address Register. <i>Offset:B00h
++         * + (ep_num * 20h) + 14h</i> */
++        volatile uint32_t doepdma; 
++        /** Reserved. <i>Offset:B00h + (ep_num * 20h) + 18h - B00h +
++         * (ep_num * 20h) + 1Ch</i> */
++        uint32_t unused[2];     
++} dwc_otg_dev_out_ep_regs_t;
++
++/**
++ * This union represents the bit fields in the Device EP Control
++ * Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union depctl_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct {
++		/** Endpoint Enable */
++		unsigned epena : 1;
++		/** Endpoint Disable */
++		unsigned epdis : 1;
++                /** Set DATA1 PID (INTR/Bulk IN and OUT endpoints)
++                 * Writing to this field sets the Endpoint DPID (DPID)
++                 * field in this register to DATA1 Set Odd
++                 * (micro)frame (SetOddFr) (ISO IN and OUT Endpoints)
++                 * Writing to this field sets the Even/Odd
++                 * (micro)frame (EO_FrNum) field to odd (micro) frame.
++                 */
++                unsigned setd1pid : 1;
++                /** Set DATA0 PID (INTR/Bulk IN and OUT endpoints)
++                 * Writing to this field sets the Endpoint DPID (DPID)
++                 * field in this register to DATA0. Set Even
++                 * (micro)frame (SetEvenFr) (ISO IN and OUT Endpoints)
++                 * Writing to this field sets the Even/Odd
++                 * (micro)frame (EO_FrNum) field to even (micro)
++                 * frame.
++                 */
++                unsigned setd0pid : 1;
++		/** Set NAK */
++		unsigned snak : 1;
++		/** Clear NAK */
++		unsigned cnak : 1;
++		/** Tx Fifo Number 
++		 * IN EPn/IN EP0
++		 * OUT EPn/OUT EP0 - reserved */
++		unsigned txfnum : 4;
++		/** Stall Handshake */
++		unsigned stall : 1;
++		/** Snoop Mode 
++		 * OUT EPn/OUT EP0
++		 * IN EPn/IN EP0 - reserved */
++		unsigned snp : 1;
++		/** Endpoint Type 
++		 *  2'b00: Control
++		 *  2'b01: Isochronous
++		 *  2'b10: Bulk
++		 *  2'b11: Interrupt */
++		unsigned eptype : 2;
++		/** NAK Status */
++		unsigned naksts : 1;
++		/** Endpoint DPID (INTR/Bulk IN and OUT endpoints)
++                 * This field contains the PID of the packet going to
++                 * be received or transmitted on this endpoint. The
++                 * application should program the PID of the first
++                 * packet going to be received or transmitted on this
++                 * endpoint , after the endpoint is
++                 * activated. Application use the SetD1PID and
++                 * SetD0PID fields of this register to program either
++                 * D0 or D1 PID.
++                 * 
++                 * The encoding for this field is
++                 *   - 0: D0
++                 *   - 1: D1
++                 */
++		unsigned dpid : 1;
++		/** USB Active Endpoint */
++		unsigned usbactep : 1;
++		/** Next Endpoint 
++		 * IN EPn/IN EP0 
++		 * OUT EPn/OUT EP0 - reserved */
++		unsigned nextep : 4;
++		/** Maximum Packet Size 
++		 * IN/OUT EPn
++		 * IN/OUT EP0 - 2 bits
++		 *   2'b00: 64 Bytes
++		 *   2'b01: 32
++		 *   2'b10: 16
++		 *   2'b11: 8 */
++#define DWC_DEP0CTL_MPS_64   0
++#define DWC_DEP0CTL_MPS_32   1
++#define DWC_DEP0CTL_MPS_16   2
++#define DWC_DEP0CTL_MPS_8    3
++		unsigned mps : 11;
++        } b;
++} depctl_data_t;
++
++/**
++ * This union represents the bit fields in the Device EP Transfer
++ * Size Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union deptsiz_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct {
++		unsigned reserved : 1;
++		/** Multi Count - Periodic IN endpoints */
++		unsigned mc : 2;
++		/** Packet Count */
++		unsigned pktcnt : 10;
++		/** Transfer size */
++		unsigned xfersize : 19;
++        } b;
++} deptsiz_data_t;
++
++/**
++ * This union represents the bit fields in the Device EP 0 Transfer
++ * Size Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union deptsiz0_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct {
++                unsigned reserved31 : 1;
++                /**Setup Packet Count (DOEPTSIZ0 Only) */
++                unsigned supcnt : 2;
++                /** Reserved */
++		unsigned reserved28_20 : 9;
++		/** Packet Count */
++		unsigned pktcnt : 1;
++                /** Reserved */
++		unsigned reserved18_7 : 12;
++		/** Transfer size */
++		unsigned xfersize : 7;
++        } b;
++} deptsiz0_data_t;
++
++
++/** Maximum number of Periodic FIFOs */
++#define MAX_PERIO_FIFOS 15
++/** Maximum number of TX FIFOs */
++#define MAX_TX_FIFOS 15
++/** Maximum number of Endpoints/HostChannels */
++#define MAX_EPS_CHANNELS 16
++//#define MAX_EPS_CHANNELS 4
++
++/**
++ * The dwc_otg_dev_if structure contains information needed to manage
++ * the DWC_otg controller acting in device mode. It represents the
++ * programming view of the device-specific aspects of the controller.
++ */
++typedef struct dwc_otg_dev_if {
++        /** Pointer to device Global registers.
++         * Device Global Registers starting at offset 800h
++         */
++        dwc_otg_device_global_regs_t *dev_global_regs; 
++#define DWC_DEV_GLOBAL_REG_OFFSET 0x800
++
++        /** 
++         * Device Logical IN Endpoint-Specific Registers 900h-AFCh 
++         */
++        dwc_otg_dev_in_ep_regs_t     *in_ep_regs[MAX_EPS_CHANNELS];
++#define DWC_DEV_IN_EP_REG_OFFSET 0x900
++#define DWC_EP_REG_OFFSET 0x20
++
++        /** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */
++        dwc_otg_dev_out_ep_regs_t    *out_ep_regs[MAX_EPS_CHANNELS];
++#define DWC_DEV_OUT_EP_REG_OFFSET 0xB00
++
++        /* Device configuration information*/
++        uint8_t  speed;              /**< Device Speed  0: Unknown, 1: LS, 2:FS, 3: HS */
++        //uint8_t  num_eps;            /**< Number of EPs  range: 0-16 (includes EP0) */
++        //uint8_t  num_perio_eps;      /**< # of Periodic EP range: 0-15 */
++	/*fscz */
++    uint8_t  num_in_eps;         /**< Number # of Tx EP range: 0-15 exept ep0 */
++    uint8_t  num_out_eps;        /**< Number # of Rx EP range: 0-15 exept ep 0*/
++
++        /** Size of periodic FIFOs (Bytes) */
++        uint16_t perio_tx_fifo_size[MAX_PERIO_FIFOS];  
++
++	/** Size of Tx FIFOs (Bytes) */
++	uint16_t tx_fifo_size[MAX_TX_FIFOS];
++
++	/** Thresholding enable flags and length varaiables **/
++	uint16_t rx_thr_en;
++	uint16_t iso_tx_thr_en;
++	uint16_t non_iso_tx_thr_en;
++
++	uint16_t rx_thr_length;
++	uint16_t tx_thr_length;
++} dwc_otg_dev_if_t;
++
++/**
++ * This union represents the bit fields in the Power and Clock Gating Control
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union pcgcctl_data	
++{
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		unsigned reserved31_05 : 27;
++		/** PHY Suspended */
++		unsigned physuspended : 1;
++		/** Reset Power Down Modules */
++		unsigned rstpdwnmodule : 1;
++		/** Power Clamp */
++		unsigned pwrclmp : 1;
++		/** Gate Hclk */
++		unsigned gatehclk : 1;
++		/** Stop Pclk */
++		unsigned stoppclk : 1;
++	} b;
++} pcgcctl_data_t;
++
++/////////////////////////////////////////////////
++// Host Mode Register Structures
++//
++/**
++ * The Host Global Registers structure defines the size and relative
++ * field offsets for the Host Mode Global Registers.  Host Global
++ * Registers offsets 400h-7FFh.
++*/
++typedef struct dwc_otg_host_global_regs 
++{
++        /** Host Configuration Register.   <i>Offset: 400h</i> */
++        volatile uint32_t hcfg;       
++        /** Host Frame Interval Register.   <i>Offset: 404h</i> */
++        volatile uint32_t hfir;       
++        /** Host Frame Number / Frame Remaining Register. <i>Offset: 408h</i> */
++        volatile uint32_t hfnum; 
++        /** Reserved.   <i>Offset: 40Ch</i> */
++        uint32_t reserved40C;
++        /** Host Periodic Transmit FIFO/ Queue Status Register. <i>Offset: 410h</i> */
++        volatile uint32_t hptxsts;    
++        /** Host All Channels Interrupt Register. <i>Offset: 414h</i> */
++        volatile uint32_t haint;      
++        /** Host All Channels Interrupt Mask Register. <i>Offset: 418h</i> */
++        volatile uint32_t haintmsk;   
++} dwc_otg_host_global_regs_t;
++
++/**
++ * This union represents the bit fields in the Host Configuration Register.
++ * Read the register into the <i>d32</i> member then set/clear the bits using
++ * the <i>b</i>it elements. Write the <i>d32</i> member to the hcfg register.
++ */
++typedef union hcfg_data
++{
++        /** raw register data */
++        uint32_t d32;
++
++        /** register bits */
++        struct {
++                /** Reserved */
++		//unsigned reserved31_03 : 29;
++		/** FS/LS Only Support */
++		unsigned fslssupp : 1;
++		/** FS/LS Phy Clock Select */
++#define DWC_HCFG_30_60_MHZ 0
++#define DWC_HCFG_48_MHZ    1
++#define DWC_HCFG_6_MHZ     2
++		unsigned fslspclksel : 2;
++        } b;
++} hcfg_data_t;
++
++/**
++ * This union represents the bit fields in the Host Frame Remaing/Number
++ * Register.  
++ */
++typedef union hfir_data
++{
++        /** raw register data */
++        uint32_t d32;
++
++        /** register bits */
++        struct {
++		unsigned reserved : 16;
++		unsigned frint : 16;
++        } b;
++} hfir_data_t;
++
++/**
++ * This union represents the bit fields in the Host Frame Remaing/Number
++ * Register.  
++ */
++typedef union hfnum_data
++{
++        /** raw register data */
++        uint32_t d32;
++
++        /** register bits */
++        struct {
++		unsigned frrem : 16;
++#define DWC_HFNUM_MAX_FRNUM 0x3FFF
++		unsigned frnum : 16;
++        } b;
++} hfnum_data_t;
++
++typedef union hptxsts_data
++{
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		/** Top of the Periodic Transmit Request Queue
++		 *  - bit 24 - Terminate (last entry for the selected channel)
++		 *  - bits 26:25 - Token Type
++		 *    - 2'b00 - Zero length
++		 *    - 2'b01 - Ping
++		 *    - 2'b10 - Disable
++		 *  - bits 30:27 - Channel Number
++		 *  - bit 31 - Odd/even microframe
++		 */
++		unsigned ptxqtop_odd : 1;
++		unsigned ptxqtop_chnum : 4;
++		unsigned ptxqtop_token : 2;
++		unsigned ptxqtop_terminate : 1;
++		unsigned ptxqspcavail : 8;
++		unsigned ptxfspcavail : 16;
++	} b;
++} hptxsts_data_t;
++
++/**
++ * This union represents the bit fields in the Host Port Control and Status
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hprt0 register.
++ */
++typedef union hprt0_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct {
++		unsigned reserved19_31 : 13;
++#define DWC_HPRT0_PRTSPD_HIGH_SPEED 0
++#define DWC_HPRT0_PRTSPD_FULL_SPEED 1
++#define DWC_HPRT0_PRTSPD_LOW_SPEED  2
++		unsigned prtspd : 2;
++		unsigned prttstctl : 4;
++		unsigned prtpwr : 1;
++		unsigned prtlnsts : 2;
++		unsigned reserved9 : 1;
++		unsigned prtrst : 1;
++		unsigned prtsusp : 1;
++		unsigned prtres : 1;
++		unsigned prtovrcurrchng : 1;
++		unsigned prtovrcurract : 1;
++		unsigned prtenchng : 1;
++		unsigned prtena : 1;
++		unsigned prtconndet : 1;
++		unsigned prtconnsts : 1;
++        } b;
++} hprt0_data_t;
++
++/**
++ * This union represents the bit fields in the Host All Interrupt 
++ * Register.  
++ */
++typedef union haint_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct {
++		unsigned reserved : 16;
++		unsigned ch15 : 1;
++		unsigned ch14 : 1;
++		unsigned ch13 : 1;
++		unsigned ch12 : 1;
++		unsigned ch11 : 1;
++		unsigned ch10 : 1;
++		unsigned ch9 : 1;
++		unsigned ch8 : 1;
++		unsigned ch7 : 1;
++		unsigned ch6 : 1;
++		unsigned ch5 : 1;
++		unsigned ch4 : 1;
++		unsigned ch3 : 1;
++		unsigned ch2 : 1;
++		unsigned ch1 : 1;
++		unsigned ch0 : 1;
++	} b;
++        struct {
++		unsigned reserved : 16;
++		unsigned chint : 16;
++	} b2;
++} haint_data_t;
++
++/**
++ * This union represents the bit fields in the Host All Interrupt 
++ * Register.  
++ */
++typedef union haintmsk_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct {
++		unsigned reserved : 16;
++		unsigned ch15 : 1;
++		unsigned ch14 : 1;
++		unsigned ch13 : 1;
++		unsigned ch12 : 1;
++		unsigned ch11 : 1;
++		unsigned ch10 : 1;
++		unsigned ch9 : 1;
++		unsigned ch8 : 1;
++		unsigned ch7 : 1;
++		unsigned ch6 : 1;
++		unsigned ch5 : 1;
++		unsigned ch4 : 1;
++		unsigned ch3 : 1;
++		unsigned ch2 : 1;
++		unsigned ch1 : 1;
++		unsigned ch0 : 1;
++	} b;
++        struct {
++		unsigned reserved : 16;
++		unsigned chint : 16;
++	} b2;
++} haintmsk_data_t;
++
++/** 
++ * Host Channel Specific Registers. <i>500h-5FCh</i>
++ */
++typedef struct dwc_otg_hc_regs 
++{
++        /** Host Channel 0 Characteristic Register. <i>Offset: 500h + (chan_num * 20h) + 00h</i> */
++        volatile uint32_t hcchar;     
++        /** Host Channel 0 Split Control Register. <i>Offset: 500h + (chan_num * 20h) + 04h</i> */
++        volatile uint32_t hcsplt;     
++        /** Host Channel 0 Interrupt Register. <i>Offset: 500h + (chan_num * 20h) + 08h</i> */
++        volatile uint32_t hcint;
++        /** Host Channel 0 Interrupt Mask Register. <i>Offset: 500h + (chan_num * 20h) + 0Ch</i> */
++        volatile uint32_t hcintmsk;
++        /** Host Channel 0 Transfer Size Register. <i>Offset: 500h + (chan_num * 20h) + 10h</i> */
++        volatile uint32_t hctsiz;
++        /** Host Channel 0 DMA Address Register. <i>Offset: 500h + (chan_num * 20h) + 14h</i> */
++        volatile uint32_t hcdma;
++        /** Reserved.  <i>Offset: 500h + (chan_num * 20h) + 18h - 500h + (chan_num * 20h) + 1Ch</i> */
++        uint32_t reserved[2];
++} dwc_otg_hc_regs_t;
++
++/**
++ * This union represents the bit fields in the Host Channel Characteristics
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hcchar register.
++ */
++typedef union hcchar_data
++{
++        /** raw register data */
++        uint32_t d32;
++
++        /** register bits */
++        struct {
++		/** Channel enable */
++		unsigned chen : 1;
++		/** Channel disable */
++		unsigned chdis : 1;
++		/**
++		 * Frame to transmit periodic transaction.
++		 * 0: even, 1: odd
++		 */
++		unsigned oddfrm : 1;
++		/** Device address */
++		unsigned devaddr : 7;
++		/** Packets per frame for periodic transfers. 0 is reserved. */
++		unsigned multicnt : 2;
++		/** 0: Control, 1: Isoc, 2: Bulk, 3: Intr */
++		unsigned eptype : 2;
++		/** 0: Full/high speed device, 1: Low speed device */
++		unsigned lspddev : 1;
++		unsigned reserved : 1;
++		/** 0: OUT, 1: IN */
++		unsigned epdir : 1;
++		/** Endpoint number */
++		unsigned epnum : 4;
++		/** Maximum packet size in bytes */
++		unsigned mps : 11;
++        } b;
++} hcchar_data_t;
++
++typedef union hcsplt_data
++{
++        /** raw register data */
++        uint32_t d32;
++
++        /** register bits */
++        struct {
++		/** Split Enble */
++		unsigned spltena : 1;
++		/** Reserved */
++		unsigned reserved : 14;
++		/** Do Complete Split */
++		unsigned compsplt : 1;
++		/** Transaction Position */
++#define DWC_HCSPLIT_XACTPOS_MID 0
++#define DWC_HCSPLIT_XACTPOS_END 1
++#define DWC_HCSPLIT_XACTPOS_BEGIN 2
++#define DWC_HCSPLIT_XACTPOS_ALL 3
++		unsigned xactpos : 2;
++		/** Hub Address */
++		unsigned hubaddr : 7;
++		/** Port Address */
++		unsigned prtaddr : 7;
++	} b;
++} hcsplt_data_t;
++
++
++/**
++ * This union represents the bit fields in the Host All Interrupt 
++ * Register.  
++ */
++typedef union hcint_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct {
++		/** Reserved */
++		unsigned reserved : 21;
++		/** Data Toggle Error */
++		unsigned datatglerr : 1;
++		/** Frame Overrun */
++		unsigned frmovrun : 1;
++		/** Babble Error */
++		unsigned bblerr : 1;
++		/** Transaction Err */
++		unsigned xacterr : 1;
++		/** NYET Response Received */
++		unsigned nyet : 1;
++		/** ACK Response Received */
++		unsigned ack : 1;
++		/** NAK Response Received */
++		unsigned nak : 1;
++		/** STALL Response Received */
++		unsigned stall : 1;
++		/** AHB Error */
++		unsigned ahberr : 1;
++		/** Channel Halted */
++		unsigned chhltd : 1;
++		/** Transfer Complete */
++		unsigned xfercomp : 1;
++	} b;
++} hcint_data_t;
++
++/**
++ * This union represents the bit fields in the Host Channel Transfer Size
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hcchar register.
++ */
++typedef union hctsiz_data
++{
++        /** raw register data */
++        uint32_t d32;
++
++        /** register bits */
++        struct {
++		/** Do PING protocol when 1 */
++		unsigned dopng : 1;
++		/**
++		 * Packet ID for next data packet
++		 * 0: DATA0
++		 * 1: DATA2
++		 * 2: DATA1
++		 * 3: MDATA (non-Control), SETUP (Control)
++		 */
++#define DWC_HCTSIZ_DATA0 0
++#define DWC_HCTSIZ_DATA1 2
++#define DWC_HCTSIZ_DATA2 1
++#define DWC_HCTSIZ_MDATA 3
++#define DWC_HCTSIZ_SETUP 3		
++		unsigned pid : 2;
++		/** Data packets to transfer */
++		unsigned pktcnt : 10;
++		/** Total transfer size in bytes */
++		unsigned xfersize : 19;
++        } b;
++} hctsiz_data_t;
++
++/**
++ * This union represents the bit fields in the Host Channel Interrupt Mask
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hcintmsk register.
++ */
++typedef union hcintmsk_data
++{
++        /** raw register data */
++        uint32_t d32;
++
++        /** register bits */
++        struct {
++		unsigned reserved : 21;
++		unsigned datatglerr : 1;
++		unsigned frmovrun : 1;
++		unsigned bblerr : 1;
++		unsigned xacterr : 1;
++		unsigned nyet : 1;
++		unsigned ack : 1;
++		unsigned nak : 1;
++		unsigned stall : 1;
++		unsigned ahberr : 1;
++		unsigned chhltd : 1;
++		unsigned xfercompl : 1;
++        } b;
++} hcintmsk_data_t;
++
++/** OTG Host Interface Structure.
++ *
++ * The OTG Host Interface Structure structure contains information
++ * needed to manage the DWC_otg controller acting in host mode. It
++ * represents the programming view of the host-specific aspects of the
++ * controller.
++ */
++typedef struct dwc_otg_host_if {
++        /** Host Global Registers starting at offset 400h.*/
++        dwc_otg_host_global_regs_t *host_global_regs;
++#define DWC_OTG_HOST_GLOBAL_REG_OFFSET 0x400 
++
++        /** Host Port 0 Control and Status Register */
++        volatile uint32_t *hprt0;
++#define DWC_OTG_HOST_PORT_REGS_OFFSET 0x440
++        
++
++        /** Host Channel Specific Registers at offsets 500h-5FCh. */
++        dwc_otg_hc_regs_t *hc_regs[MAX_EPS_CHANNELS];
++#define DWC_OTG_HOST_CHAN_REGS_OFFSET 0x500
++#define DWC_OTG_CHAN_REGS_OFFSET 0x20
++
++
++        /* Host configuration information */
++        /** Number of Host Channels (range: 1-16) */
++        uint8_t  num_host_channels;    
++        /** Periodic EPs supported (0: no, 1: yes) */
++        uint8_t  perio_eps_supported;
++        /** Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO) */
++        uint16_t perio_tx_fifo_size;   
++  
++} dwc_otg_host_if_t;
++
++#endif
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0045-dwc_otg-remove-bogus-halt_channel.patch b/target/linux/lantiq/patches-3.3/0045-dwc_otg-remove-bogus-halt_channel.patch
new file mode 100644
index 0000000000..888e4ccb26
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0045-dwc_otg-remove-bogus-halt_channel.patch
@@ -0,0 +1,26 @@
+From 0cb5a616c2f1aaca4e8946155e84982ae96aae4a Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 23 Mar 2012 16:14:33 +0100
+Subject: [PATCH 45/70] dwc_otg: remove bogus halt_channel
+
+https://lists.openwrt.org/pipermail/openwrt-devel/2012-March/014524.html
+---
+ drivers/usb/dwc_otg/dwc_otg_hcd_intr.c |    2 --
+ 1 files changed, 0 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c b/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
+index 834b5e0..f6f3f3d 100644
+--- a/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
++++ b/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
+@@ -1278,8 +1278,6 @@ static int32_t handle_hc_ack_intr(dwc_otg_hcd_t *_hcd,
+ 			 * automatically executes the PING, then the transfer.
+ 			 */
+ 		    halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_ACK, must_free);
+-		} else {
+-		    halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
+ 		}
+ 	}
+ 
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0046-MIPS-adds-ifxhcd.patch b/target/linux/lantiq/patches-3.3/0046-MIPS-adds-ifxhcd.patch
new file mode 100644
index 0000000000..fdf5efbda7
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0046-MIPS-adds-ifxhcd.patch
@@ -0,0 +1,16672 @@
+From 518d6418815f8ee4189b5ac3455a580fa5f3d3a6 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 11 Mar 2012 15:59:39 +0100
+Subject: [PATCH 46/70] MIPS: adds ifxhcd
+
+---
+ arch/mips/lantiq/xway/Makefile      |    2 +-
+ arch/mips/lantiq/xway/dev-ifxhcd.c  |   45 +
+ arch/mips/lantiq/xway/dev-ifxhcd.h  |   17 +
+ arch/mips/lantiq/xway/sysctrl.c     |    2 +
+ drivers/usb/Kconfig                 |    2 +
+ drivers/usb/Makefile                |    2 +
+ drivers/usb/ifxhcd/Kconfig          |   58 +
+ drivers/usb/ifxhcd/Makefile         |   85 +
+ drivers/usb/ifxhcd/TagHistory       |  171 ++
+ drivers/usb/ifxhcd/ifxhcd.c         | 2523 +++++++++++++++++++++++
+ drivers/usb/ifxhcd/ifxhcd.h         |  628 ++++++
+ drivers/usb/ifxhcd/ifxhcd_es.c      |  549 +++++
+ drivers/usb/ifxhcd/ifxhcd_intr.c    | 3742 +++++++++++++++++++++++++++++++++++
+ drivers/usb/ifxhcd/ifxhcd_queue.c   |  418 ++++
+ drivers/usb/ifxhcd/ifxusb_cif.c     | 1458 ++++++++++++++
+ drivers/usb/ifxhcd/ifxusb_cif.h     |  665 +++++++
+ drivers/usb/ifxhcd/ifxusb_cif_d.c   |  458 +++++
+ drivers/usb/ifxhcd/ifxusb_cif_h.c   |  846 ++++++++
+ drivers/usb/ifxhcd/ifxusb_ctl.c     | 1385 +++++++++++++
+ drivers/usb/ifxhcd/ifxusb_driver.c  |  970 +++++++++
+ drivers/usb/ifxhcd/ifxusb_plat.h    | 1018 ++++++++++
+ drivers/usb/ifxhcd/ifxusb_regs.h    | 1420 +++++++++++++
+ drivers/usb/ifxhcd/ifxusb_version.h |    5 +
+ 23 files changed, 16468 insertions(+), 1 deletions(-)
+ create mode 100644 arch/mips/lantiq/xway/dev-ifxhcd.c
+ create mode 100644 arch/mips/lantiq/xway/dev-ifxhcd.h
+ create mode 100644 drivers/usb/ifxhcd/Kconfig
+ create mode 100644 drivers/usb/ifxhcd/Makefile
+ create mode 100644 drivers/usb/ifxhcd/TagHistory
+ create mode 100644 drivers/usb/ifxhcd/ifxhcd.c
+ create mode 100644 drivers/usb/ifxhcd/ifxhcd.h
+ create mode 100644 drivers/usb/ifxhcd/ifxhcd_es.c
+ create mode 100644 drivers/usb/ifxhcd/ifxhcd_intr.c
+ create mode 100644 drivers/usb/ifxhcd/ifxhcd_queue.c
+ create mode 100644 drivers/usb/ifxhcd/ifxusb_cif.c
+ create mode 100644 drivers/usb/ifxhcd/ifxusb_cif.h
+ create mode 100644 drivers/usb/ifxhcd/ifxusb_cif_d.c
+ create mode 100644 drivers/usb/ifxhcd/ifxusb_cif_h.c
+ create mode 100644 drivers/usb/ifxhcd/ifxusb_ctl.c
+ create mode 100644 drivers/usb/ifxhcd/ifxusb_driver.c
+ create mode 100644 drivers/usb/ifxhcd/ifxusb_plat.h
+ create mode 100644 drivers/usb/ifxhcd/ifxusb_regs.h
+ create mode 100644 drivers/usb/ifxhcd/ifxusb_version.h
+
+diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
+index 4c3106f..c9baf91 100644
+--- a/arch/mips/lantiq/xway/Makefile
++++ b/arch/mips/lantiq/xway/Makefile
+@@ -1,4 +1,4 @@
+-obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o prom.o nand.o timer.o
++obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o prom.o nand.o timer.o dev-ifxhcd.o
+ 
+ obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
+ obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
+diff --git a/arch/mips/lantiq/xway/dev-ifxhcd.c b/arch/mips/lantiq/xway/dev-ifxhcd.c
+new file mode 100644
+index 0000000..ea08a35
+--- /dev/null
++++ b/arch/mips/lantiq/xway/dev-ifxhcd.c
+@@ -0,0 +1,45 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/string.h>
++#include <linux/mtd/physmap.h>
++#include <linux/kernel.h>
++#include <linux/reboot.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <linux/etherdevice.h>
++#include <linux/reboot.h>
++#include <linux/time.h>
++#include <linux/io.h>
++#include <linux/gpio.h>
++#include <linux/leds.h>
++
++#include <asm/bootinfo.h>
++#include <asm/irq.h>
++
++#include <lantiq_soc.h>
++#include <lantiq_irq.h>
++#include <lantiq_platform.h>
++
++static u64 dmamask = (u32)0x1fffffff;
++
++static struct platform_device platform_dev = {
++	.name = "ifxusb_hcd",
++	.dev.dma_mask = &dmamask,
++};
++
++int __init
++xway_register_hcd(int *pins)
++{
++	platform_dev.dev.platform_data = pins;
++	return platform_device_register(&platform_dev);
++}
+diff --git a/arch/mips/lantiq/xway/dev-ifxhcd.h b/arch/mips/lantiq/xway/dev-ifxhcd.h
+new file mode 100644
+index 0000000..18b3d2d
+--- /dev/null
++++ b/arch/mips/lantiq/xway/dev-ifxhcd.h
+@@ -0,0 +1,17 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _LTQ_DEV_HCD_H__
++#define _LTQ_DEV_HCD_H__
++
++#include <lantiq_platform.h>
++
++extern void __init xway_register_hcd(int *pin);
++
++#endif
+diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
+index 1a2e2d4..ac7383f 100644
+--- a/arch/mips/lantiq/xway/sysctrl.c
++++ b/arch/mips/lantiq/xway/sysctrl.c
+@@ -166,6 +166,8 @@ void __init ltq_soc_init(void)
+ 		clkdev_add_pmu("ltq_pcie", "pdi", 1, PMU1_PCIE_PDI);
+ 		clkdev_add_pmu("ltq_pcie", "ctl", 1, PMU1_PCIE_CTL);
+ 		clkdev_add_pmu("ltq_pcie", "ahb", 0, PMU_AHBM | PMU_AHBS);
++		clkdev_add_pmu("usb0", NULL, 0, (1<<6) | 1);
++		clkdev_add_pmu("usb1", NULL, 0, (1<<26) | (1<<27));
+ 	} else {
+ 		clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
+ 					ltq_danube_io_region_clock());
+diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
+index 8469e23..f69cc4a 100644
+--- a/drivers/usb/Kconfig
++++ b/drivers/usb/Kconfig
+@@ -184,4 +184,6 @@ source "drivers/usb/gadget/Kconfig"
+ 
+ source "drivers/usb/otg/Kconfig"
+ 
++source "drivers/usb/ifxhcd/Kconfig"
++
+ endif # USB_SUPPORT
+diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
+index d46b792..7068e99 100644
+--- a/drivers/usb/Makefile
++++ b/drivers/usb/Makefile
+@@ -58,3 +58,5 @@ obj-$(CONFIG_USB_RENESAS_USBHS)	+= renesas_usbhs/
+ obj-$(CONFIG_USB_GADGET)	+= gadget/
+ 
+ obj-$(CONFIG_USB_COMMON)	+= usb-common.o
++
++obj-$(CONFIG_USB_HOST_IFX)	+= ifxhcd/
+diff --git a/drivers/usb/ifxhcd/Kconfig b/drivers/usb/ifxhcd/Kconfig
+new file mode 100644
+index 0000000..7eb8ceb
+--- /dev/null
++++ b/drivers/usb/ifxhcd/Kconfig
+@@ -0,0 +1,58 @@
++
++config USB_HOST_IFX
++	tristate "Infineon USB Host Controller Driver"
++	depends on USB
++	default n
++	help
++	Infineon USB Host Controller
++
++config USB_HOST_IFX_B
++	bool "USB host mode on core 1 and 2"
++	depends on USB_HOST_IFX
++	help
++	Both cores run as host
++
++#config USB_HOST_IFX_1
++#config USB_HOST_IFX_2
++
++#config IFX_DANUBE
++#config IFX_AMAZON_SE
++config IFX_AR9
++	depends on USB_HOST_IFX
++	bool "AR9"
++
++config IFX_VR9
++	depends on USB_HOST_IFX
++	bool "VR9"
++
++#config USB_HOST_IFX_FORCE_USB11
++#	bool "Forced USB1.1"
++#	depends on USB_HOST_IFX
++#	default n
++#	help
++#	force to be USB 1.1
++
++#config USB_HOST_IFX_WITH_HS_ELECT_TST
++#	bool "With HS_Electrical Test"
++#	depends on USB_HOST_IFX
++#	default n
++#	help
++#	With USBIF HSET routines
++
++#config USB_HOST_IFX_WITH_ISO
++#	bool "With ISO transfer"
++#	depends on USB_HOST_IFX
++#	default n
++#	help
++#	With USBIF ISO transfer
++
++config USB_HOST_IFX_UNALIGNED_ADJ
++	bool "Adjust"
++	depends on USB_HOST_IFX
++	help
++	USB_HOST_IFX_UNALIGNED_ADJ
++
++#config USB_HOST_IFX_UNALIGNED_CHK
++#config USB_HOST_IFX_UNALIGNED_NONE
++
++
+diff --git a/drivers/usb/ifxhcd/Makefile b/drivers/usb/ifxhcd/Makefile
+new file mode 100644
+index 0000000..0a2ac99
+--- /dev/null
++++ b/drivers/usb/ifxhcd/Makefile
+@@ -0,0 +1,85 @@
++
++#
++# Makefile for USB Core files and filesystem
++#
++	ifxusb_host-objs    := ifxusb_driver.o
++	ifxusb_host-objs    += ifxusb_ctl.o
++	ifxusb_host-objs    += ifxusb_cif.o
++	ifxusb_host-objs    += ifxusb_cif_h.o
++	ifxusb_host-objs    += ifxhcd.o
++	ifxusb_host-objs    += ifxhcd_es.o
++	ifxusb_host-objs    += ifxhcd_intr.o
++	ifxusb_host-objs    += ifxhcd_queue.o
++
++ifeq ($(CONFIG_IFX_TWINPASS),y)
++        EXTRA_CFLAGS        += -D__IS_TWINPASS__
++endif
++ifeq ($(CONFIG_IFX_DANUBE),y)
++        EXTRA_CFLAGS        += -D__IS_DANUBE__
++endif
++ifeq ($(CONFIG_IFX_AMAZON_SE),y)
++        EXTRA_CFLAGS        += -D__IS_AMAZON_SE__
++endif
++ifeq ($(CONFIG_IFX_AR9),y)
++        EXTRA_CFLAGS        += -D__IS_AR9__
++endif
++ifeq ($(CONFIG_IFX_AMAZON_S),y)
++        EXTRA_CFLAGS        += -D__IS_AR9__
++endif
++ifeq ($(CONFIG_IFX_VR9),y)
++        EXTRA_CFLAGS        += -D__IS_VR9__
++endif
++
++ifeq ($(CONFIG_USB_HOST_IFX),y)
++	EXTRA_CFLAGS  += -Dlinux -D__LINUX__
++	EXTRA_CFLAGS  += -D__IS_HOST__
++	EXTRA_CFLAGS  += -D__KERNEL__
++endif
++
++ifeq ($(CONFIG_USB_HOST_IFX),m)
++	EXTRA_CFLAGS  += -Dlinux -D__LINUX__
++	EXTRA_CFLAGS  += -D__IS_HOST__
++	EXTRA_CFLAGS  += -D__KERNEL__
++endif
++
++ifeq ($(CONFIG_USB_DEBUG),y)
++	EXTRA_CFLAGS  += -D__DEBUG__
++	EXTRA_CFLAGS  += -D__ENABLE_DUMP__
++endif
++
++ifeq ($(CONFIG_USB_HOST_IFX_B),y)
++        EXTRA_CFLAGS  += -D__IS_DUAL__
++endif
++ifeq ($(CONFIG_USB_HOST_IFX_1),y)
++        EXTRA_CFLAGS  += -D__IS_FIRST__
++endif
++ifeq ($(CONFIG_USB_HOST_IFX_2),y)
++        EXTRA_CFLAGS  += -D__IS_SECOND__
++endif
++
++ifeq ($(CONFIG_USB_HOST_IFX_FORCE_USB11),y)
++	EXTRA_CFLAGS  += -D__FORCE_USB11__
++endif
++ifeq ($(CONFIG_USB_HOST_IFX_WITH_HS_ELECT_TST),y)
++	EXTRA_CFLAGS  += -D__WITH_HS_ELECT_TST__
++endif
++ifeq ($(CONFIG_USB_HOST_IFX_WITH_ISO),y)
++	EXTRA_CFLAGS  += -D__EN_ISOC__
++endif
++ifeq ($(CONFIG_USB_HOST_IFX_UNALIGNED_ADJ),y)
++	EXTRA_CFLAGS  += -D__UNALIGNED_BUFFER_ADJ__
++endif
++ifeq ($(CONFIG_USB_HOST_IFX_UNALIGNED_CHK),y)
++	EXTRA_CFLAGS  += -D__UNALIGNED_BUFFER_CHK__
++endif
++
++#	EXTRA_CFLAGS  += -D__DYN_SOF_INTR__
++	EXTRA_CFLAGS  += -D__UEIP__
++#	EXTRA_CFLAGS  += -D__EN_ISOC__
++#	EXTRA_CFLAGS  += -D__EN_ISOC_SPLIT__
++
++## 20110628 AVM/WK New flag for less SOF IRQs
++	EXTRA_CFLAGS  += -D__USE_TIMER_4_SOF__
++	
++obj-$(CONFIG_USB_HOST_IFX)	+= ifxusb_host.o
++
+diff --git a/drivers/usb/ifxhcd/TagHistory b/drivers/usb/ifxhcd/TagHistory
+new file mode 100644
+index 0000000..3820d70
+--- /dev/null
++++ b/drivers/usb/ifxhcd/TagHistory
+@@ -0,0 +1,171 @@
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://embeddedvm/home/SVN/drivers/usb_host20/tags/5.18-r240-non_musb_ar9_vr9-SOF_Timer_Fixed
++| Erzeugt mit SVN-Tagger Version 3.74.
+++----------------------------------------------------------------------+
++FIX - Korrektur bei der SOF-Timer/IRQ Steuerung. (Bug in Tag 5.17)
++FIX - Fehlerbehandlung an mehreren Stellen korrigiert bzw. eingebaut.
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://embeddedvm/home/SVN/drivers/usb_host20/tags/5.17-r237-non_musb_ar9_vr9-2_6_32_41_Kompatibel
++| Erzeugt mit SVN-Tagger Version 3.73.
+++----------------------------------------------------------------------+
++FIX - Kompatiblität zum Update auf Kernel 2.6.32-41. Weiterhin für 28er geeignet.
++ENH - Reduktion der Interrruptlast durch Nutzung eines hrtimers anstatt SOF-IRQ.
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.16-r208-non_musb_ar9_vr9-20110421_Zero_Paket_Optimiert
++| Erzeugt mit SVN-Tagger Version 3.66.
+++----------------------------------------------------------------------+
++
++FIX - VR9 / AR9 - Zero Packet. Optimierung korrigiert.
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.15-r205-non_musb_ar9_vr9-20110421_Zero_Paket_WA_funktioniert
++| Erzeugt mit SVN-Tagger Version 3.66.
+++----------------------------------------------------------------------+
++
++FIX - VR9 / AR9 - "Zero Packet" funktioniert nun wirklich. Letzter Tag hatte einen Bug.
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.14-r202-non_musb_ar9_vr9-20110420_Zero_Paket_WA
++| Erzeugt mit SVN-Tagger Version 3.66.
+++----------------------------------------------------------------------+
++
++FIX - VR9 / AR9 - Zero Packet Workaround: ZLP wird nun geschickt wenn URB_ZERO_PACKET aktiv ist. 
++                  Wird von LTE Altair Firmware benoetig. 
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.13-r199-non_musb_ar9_vr9-20110310_Init_Fix
++| Erzeugt mit SVN-Tagger Version 3.64.
+++----------------------------------------------------------------------+
++
++FIX - VR9 / AR9 - Timing der Initialisierungsphase angepasst zum Kernel 2.6.28 mit UGW-4.3.1.
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.12-r184-non_musb_ar9_vr9-20110118_Full_Speed_Fix
++| Erzeugt mit SVN-Tagger Version 3.58.
+++----------------------------------------------------------------------+
++AR9/VR9 (3370,6840,7320):
++Makefile - FIX - (Workaround) Debug Modus hilft gegen Enumerationsfehler bei Full Speed Drucker. 
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.11-r175-non_musb_ar9_vr9-20101220_VR9_2_Ports_DMA_Fix
++| Erzeugt mit SVN-Tagger Version 3.58.
+++----------------------------------------------------------------------+
++
++FIX - VR9 - Workaround DMA Burst Size. Wenn beiden USB Ports benutzt werden, geht der USB Host nicht mehr. 
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.10-r169-non_musb_ar9_vr9-Fix_Spontan_Reboot
++| Erzeugt mit SVN-Tagger Version 3.58.
+++----------------------------------------------------------------------+
++
++FIX - Endlosschleife führte zu einem spontanen Reboot. 
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.9-r166-non_musb_ar9_vr9-20101112_deferred_completion
++| Erzeugt mit SVN-Tagger Version 3.58.
+++----------------------------------------------------------------------+
++
++ENH - Deferred URB Completion Mechanismus eingebaut. Nun ca. 10% schneller bei usb-storage.
++ 
++FIX - PING Flow Control gefixt.
++FIX - Channel Halt wird nun immer angerufen. (Split Transaction wurde nicht erfolgreich gestoppt).
++FIX - Spinlock Benutzung verbessert. Mehr Stabilitaet. 
++   
++CHG - Ubersetztungsoption __DEBUG__ ist nun abhaengig von CONFIG_USB_DEBUG
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.8-r149-non_musb_ar9_vr9-20100827_LTE_Interrupt_EP_Fix
++| Erzeugt mit SVN-Tagger Version 3.57.
+++----------------------------------------------------------------------+
++AR9/VR9 - FIX - Interrupt Packets gingen verloren, wegen falschem Timing beim OddFrame Bit.
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.7-r142-non_musb_ar9_vr9-20100728_Unaligned_Buf_Fix
++| Erzeugt mit SVN-Tagger Version 3.57.
+++----------------------------------------------------------------------+
++FIX - "Unaligned Data" Flag wieder nach Transfer geloescht. 
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.6-r133-non_musb_ar9_vr9-20100714_Toggle_Datenverlust_Fix
++| Erzeugt mit SVN-Tagger Version 3.57.
+++----------------------------------------------------------------------+
++TL5508 - Einige UMTS Modems funktionierten nicht korrekt an der 7320 (AR9).
++FIX - USB Data Toggle des usbcore benutzen. Datenverlust nach EP-Halt.
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.5-r130-non_musb_ar9_vr9-20100712_USB_Ports_abschaltbar
++| Erzeugt mit SVN-Tagger Version 3.57.
+++----------------------------------------------------------------------+
++Power - Fix - Beide USB Port abschaltbar bei rmmod.
++rmmod - FIX - URB_Dequeue funktionierte beim Entladen des Treibers nicht (mehrere Ursachen).
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.4-r126-non_musb_ar9_vr9-20100701_Lost_Interrupt_Workaround
++| Erzeugt mit SVN-Tagger Version 3.57.
+++----------------------------------------------------------------------+
++FIX - Workaround wegen verpasstem Interrupt, bei Full-Speed Interrupt EP.
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.3-r123-non_musb_ar9_vr9-20100630_UMTS_Fixes
++| Erzeugt mit SVN-Tagger Version 3.57.
+++----------------------------------------------------------------------+
++FIX - Full-Speed Interrupt Endpoint hinter Hi-Speed Hub funktioniert nun (UMTS Modems)
++FIX - usb_hcd_link_urb_from_ep API von USBCore muss benutzt werden.
++FIX - Interrupt URBs nicht bei NAK completen. 
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.2-r114-non_musb_ar9_vr9-20100520_StickAndSurf_funktioniert
++| Erzeugt mit SVN-Tagger Version 3.56.
+++----------------------------------------------------------------------+
++- Merge mit neuen LANTIQ Sourcen "3.0alpha B100312"
++- Fix - Spin_lock eingebaut, Stick&Surf funktioniert nun
++
++- DEP - CONFIG_USB_HOST_IFX_WITH_ISO wird nicht unterstuetzt: In der Kernel Config deaktivieren.
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.1-r107-non_musb_ar9_vr9-20100505_IFXUSB_Host_mit_Energiemonitor
++| Erzeugt mit SVN-Tagger Version 3.56.
+++----------------------------------------------------------------------+
++USB Host Treiber für AR9 und VR9
++--------------------------------
++FIX - Toggle Error nach STALL - Einfacher Workaround - Nun werden Massenspeicherpartitionen erkannt!
++AVM_POWERMETER - USB Energiemonitor Support.
++
++Bekanntes Problem: Stick and Surf funktioniert nur sporadisch, weil CONTROL_IRQ manchmal ausbleibt.
++
+diff --git a/drivers/usb/ifxhcd/ifxhcd.c b/drivers/usb/ifxhcd/ifxhcd.c
+new file mode 100644
+index 0000000..d2ae125
+--- /dev/null
++++ b/drivers/usb/ifxhcd/ifxhcd.c
+@@ -0,0 +1,2523 @@
++/*****************************************************************************
++ **   FILE NAME       : ifxhcd.c
++ **   PROJECT         : IFX USB sub-system V3
++ **   MODULES         : IFX USB sub-system Host and Device driver
++ **   SRC VERSION     : 1.0
++ **   DATE            : 1/Jan/2009
++ **   AUTHOR          : Chen, Howard
++ **   DESCRIPTION     : This file contains the structures, constants, and interfaces for
++ **                     the Host Contoller Driver (HCD).
++ **
++ **                     The Host Controller Driver (HCD) is responsible for translating requests
++ **                     from the USB Driver into the appropriate actions on the IFXUSB controller.
++ **                     It isolates the USBD from the specifics of the controller by providing an
++ **                     API to the USBD.
++ *****************************************************************************/
++
++/*!
++  \file ifxhcd.c
++  \ingroup IFXUSB_DRIVER_V3
++  \brief This file contains the implementation of the HCD. In Linux,
++   the HCD implements the hc_driver API.
++*/
++
++#include <linux/version.h>
++#include "ifxusb_version.h"
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++
++#include <linux/device.h>
++
++#include <linux/errno.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/string.h>
++
++#include <linux/dma-mapping.h>
++
++
++#include "ifxusb_plat.h"
++#include "ifxusb_regs.h"
++#include "ifxusb_cif.h"
++#include "ifxhcd.h"
++
++#include <asm/irq.h>
++
++#ifdef CONFIG_AVM_POWERMETER
++#include <linux/avm_power.h>
++#endif /*--- #ifdef CONFIG_AVM_POWERMETER ---*/
++
++#ifdef __DEBUG__
++	static void dump_urb_info(struct urb *_urb, char* _fn_name);
++	static void dump_channel_info(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh);
++#endif
++
++
++/*!
++ \brief Sets the final status of an URB and returns it to the device driver. Any
++  required cleanup of the URB is performed.
++ */
++void ifxhcd_complete_urb(ifxhcd_hcd_t *_ifxhcd, ifxhcd_urbd_t *_urbd,  int _status)
++{
++	struct urb *urb=NULL;
++	unsigned long flags = 0;
++
++	/*== AVM/BC 20101111 Function called with Lock ==*/
++	//SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
++
++	if (!list_empty(&_urbd->urbd_list_entry))
++		list_del_init (&_urbd->urbd_list_entry);
++
++	if(!_urbd->urb)
++	{
++		IFX_ERROR("%s: invalid urb\n",__func__);
++		/*== AVM/BC 20101111 Function called with Lock ==*/
++		//SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
++		return;
++	}
++
++	urb=_urbd->urb;
++
++	#ifdef __DEBUG__
++		if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB))
++		{
++			IFX_PRINT("%s: _urbd %p, urb %p, device %d, ep %d %s/%s, status=%d\n",
++				  __func__, _urbd,_urbd->urb, usb_pipedevice(_urbd->urb->pipe),
++				  usb_pipeendpoint(_urbd->urb->pipe),
++				  usb_pipein(_urbd->urb->pipe) ? "IN" : "OUT",
++				  (_urbd->is_in) ? "IN" : "OUT",
++				   _status);
++			if (_urbd->epqh->ep_type == IFXUSB_EP_TYPE_ISOC)
++			{
++				int i;
++				for (i = 0; i < _urbd->urb->number_of_packets; i++)
++					IFX_PRINT("  ISO Desc %d status: %d\n", i, _urbd->urb->iso_frame_desc[i].status);
++			}
++		}
++	#endif
++
++	if (!_urbd->epqh)
++		IFX_ERROR("%s: invalid epqd\n",__func__);
++
++	#if   defined(__UNALIGNED_BUFFER_ADJ__)
++		else if(_urbd->is_active)
++		{
++			if( _urbd->epqh->aligned_checked   &&
++			    _urbd->epqh->using_aligned_buf &&
++			    _urbd->xfer_buff &&
++			    _urbd->is_in )
++				memcpy(_urbd->xfer_buff,_urbd->epqh->aligned_buf,_urbd->xfer_len);
++			_urbd->epqh->using_aligned_buf=0;
++			_urbd->epqh->using_aligned_setup=0;
++			_urbd->epqh->aligned_checked=0;
++		}
++	#endif
++
++	urb->status = _status;
++	urb->hcpriv=NULL;
++	kfree(_urbd);
++
++	usb_hcd_unlink_urb_from_ep(ifxhcd_to_syshcd(_ifxhcd), urb);
++	SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
++
++//    usb_hcd_giveback_urb(ifxhcd_to_syshcd(_ifxhcd), urb);
++    usb_hcd_giveback_urb(ifxhcd_to_syshcd(_ifxhcd), urb, _status);
++
++    /*== AVM/BC 20100630 - 2.6.28 needs HCD link/unlink URBs ==*/
++	SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
++}
++
++/*== AVM/BC 20101111 URB Complete deferred
++ * Must be called with Spinlock
++ */
++
++/*!
++ \brief Inserts an urbd structur in the completion list. The urbd will be
++  later completed by select_eps_sub
++ */
++void defer_ifxhcd_complete_urb(ifxhcd_hcd_t *_ifxhcd, ifxhcd_urbd_t *_urbd,  int _status)
++{
++
++	_urbd->status = _status;
++
++	//Unlink Urbd from epqh / Insert it into the complete list
++	list_move_tail(&_urbd->urbd_list_entry, &_ifxhcd->urbd_complete_list);
++
++}
++
++/*!
++ \brief Processes all the URBs in a single EPQHs. Completes them with
++        status and frees the URBD.
++ */
++//static
++void kill_all_urbs_in_epqh(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh, int _status)
++{
++	struct list_head *urbd_item;
++	ifxhcd_urbd_t    *urbd;
++
++	if(!_epqh)
++		return;
++
++	for (urbd_item  =  _epqh->urbd_list.next;
++	     urbd_item != &_epqh->urbd_list;
++	     urbd_item  =  _epqh->urbd_list.next)
++	{
++		urbd = list_entry(urbd_item, ifxhcd_urbd_t, urbd_list_entry);
++		ifxhcd_complete_urb(_ifxhcd, urbd, _status);
++	}
++}
++
++
++/*!
++ \brief Free all EPS in one Processes all the URBs in a single list of EPQHs. Completes them with
++        -ETIMEDOUT and frees the URBD.
++ */
++//static
++void epqh_list_free(ifxhcd_hcd_t *_ifxhcd, struct list_head *_epqh_list)
++{
++		struct list_head *item;
++		ifxhcd_epqh_t    *epqh;
++
++		if (!_epqh_list)
++			return;
++		if (_epqh_list->next == NULL) /* The list hasn't been initialized yet. */
++			return;
++
++	/* Ensure there are no URBDs or URBs left. */
++	for (item = _epqh_list->next; item != _epqh_list; item = _epqh_list->next)
++	{
++		epqh = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
++		kill_all_urbs_in_epqh(_ifxhcd, epqh, -ETIMEDOUT);
++		ifxhcd_epqh_free(epqh);
++	}
++}
++
++
++
++//static
++void epqh_list_free_all(ifxhcd_hcd_t *_ifxhcd)
++{
++	unsigned long flags;
++
++	/*== AVM/BC 20101111 - 2.6.28 Needs Spinlock ==*/
++	SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
++
++	epqh_list_free(_ifxhcd, &_ifxhcd->epqh_np_active   );
++	epqh_list_free(_ifxhcd, &_ifxhcd->epqh_np_ready    );
++	epqh_list_free(_ifxhcd, &_ifxhcd->epqh_intr_active );
++	epqh_list_free(_ifxhcd, &_ifxhcd->epqh_intr_ready  );
++	#ifdef __EN_ISOC__
++		epqh_list_free(_ifxhcd, &_ifxhcd->epqh_isoc_active );
++		epqh_list_free(_ifxhcd, &_ifxhcd->epqh_isoc_ready  );
++	#endif
++	epqh_list_free(_ifxhcd, &_ifxhcd->epqh_stdby       );
++
++	SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
++
++}
++
++
++/*!
++   \brief This function is called to handle the disconnection of host port.
++ */
++int32_t ifxhcd_disconnect(ifxhcd_hcd_t *_ifxhcd)
++{
++	IFX_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _ifxhcd);
++
++	/* Set status flags for the hub driver. */
++	_ifxhcd->flags.b.port_connect_status_change = 1;
++	_ifxhcd->flags.b.port_connect_status = 0;
++
++	/*
++	 * Shutdown any transfers in process by clearing the Tx FIFO Empty
++	 * interrupt mask and status bits and disabling subsequent host
++	 * channel interrupts.
++	 */
++	 {
++		gint_data_t intr = { .d32 = 0 };
++		intr.b.nptxfempty = 1;
++		intr.b.ptxfempty  = 1;
++		intr.b.hcintr     = 1;
++		ifxusb_mreg (&_ifxhcd->core_if.core_global_regs->gintmsk, intr.d32, 0);
++		ifxusb_mreg (&_ifxhcd->core_if.core_global_regs->gintsts, intr.d32, 0);
++	}
++
++	/* Respond with an error status to all URBs in the schedule. */
++	epqh_list_free_all(_ifxhcd);
++
++	/* Clean up any host channels that were in use. */
++	{
++		int               num_channels;
++		ifxhcd_hc_t      *channel;
++		ifxusb_hc_regs_t *hc_regs;
++		hcchar_data_t     hcchar;
++		int	              i;
++
++		num_channels = _ifxhcd->core_if.params.host_channels;
++
++		for (i = 0; i < num_channels; i++)
++		{
++			channel = &_ifxhcd->ifxhc[i];
++			if (list_empty(&channel->hc_list_entry))
++			{
++				hc_regs = _ifxhcd->core_if.hc_regs[i];
++				hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++				if (hcchar.b.chen)
++				{
++					/* Halt the channel. */
++					hcchar.b.chdis = 1;
++					ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
++				}
++				list_add_tail(&channel->hc_list_entry, &_ifxhcd->free_hc_list);
++				ifxhcd_hc_cleanup(&_ifxhcd->core_if, channel);
++			}
++		}
++	}
++	return 1;
++}
++
++
++/*!
++   \brief Frees secondary storage associated with the ifxhcd_hcd structure contained
++          in the struct usb_hcd field.
++ */
++static void ifxhcd_freeextra(struct usb_hcd *_syshcd)
++{
++	ifxhcd_hcd_t 	*ifxhcd = syshcd_to_ifxhcd(_syshcd);
++
++	IFX_DEBUGPL(DBG_HCD, "IFXUSB HCD FREE\n");
++
++	/* Free memory for EPQH/URBD lists */
++	epqh_list_free_all(ifxhcd);
++
++	/* Free memory for the host channels. */
++	ifxusb_free_buf(ifxhcd->status_buf);
++	return;
++}
++#ifdef __USE_TIMER_4_SOF__
++static enum hrtimer_restart ifxhcd_timer_func(struct hrtimer *timer) {
++	ifxhcd_hcd_t 	*ifxhcd = container_of(timer, ifxhcd_hcd_t, hr_timer);
++	
++	ifxhcd_handle_intr(ifxhcd);
++
++    return HRTIMER_NORESTART;
++}
++#endif
++
++/*!
++   \brief Initializes the HCD. This function allocates memory for and initializes the
++  static parts of the usb_hcd and ifxhcd_hcd structures. It also registers the
++  USB bus with the core and calls the hc_driver->start() function. It returns
++  a negative error on failure.
++ */
++int ifxhcd_init(ifxhcd_hcd_t *_ifxhcd)
++{
++	int retval = 0;
++	struct usb_hcd *syshcd = NULL;
++
++	IFX_DEBUGPL(DBG_HCD, "IFX USB HCD INIT\n");
++
++	spin_lock_init(&_ifxhcd->lock);
++#ifdef __USE_TIMER_4_SOF__
++	hrtimer_init(&_ifxhcd->hr_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
++	_ifxhcd->hr_timer.function = ifxhcd_timer_func;
++#endif
++	_ifxhcd->hc_driver.description      = _ifxhcd->core_if.core_name;
++	_ifxhcd->hc_driver.product_desc     = "IFX USB Controller";
++	//_ifxhcd->hc_driver.hcd_priv_size    = sizeof(ifxhcd_hcd_t);
++	_ifxhcd->hc_driver.hcd_priv_size    = sizeof(unsigned long);
++	_ifxhcd->hc_driver.irq              = ifxhcd_irq;
++	_ifxhcd->hc_driver.flags            = HCD_MEMORY | HCD_USB2;
++	_ifxhcd->hc_driver.start            = ifxhcd_start;
++	_ifxhcd->hc_driver.stop             = ifxhcd_stop;
++	//_ifxhcd->hc_driver.reset          =
++	//_ifxhcd->hc_driver.suspend        =
++	//_ifxhcd->hc_driver.resume         =
++	_ifxhcd->hc_driver.urb_enqueue      = ifxhcd_urb_enqueue;
++	_ifxhcd->hc_driver.urb_dequeue      = ifxhcd_urb_dequeue;
++	_ifxhcd->hc_driver.endpoint_disable = ifxhcd_endpoint_disable;
++	_ifxhcd->hc_driver.get_frame_number = ifxhcd_get_frame_number;
++	_ifxhcd->hc_driver.hub_status_data  = ifxhcd_hub_status_data;
++	_ifxhcd->hc_driver.hub_control      = ifxhcd_hub_control;
++	//_ifxhcd->hc_driver.hub_suspend    =
++	//_ifxhcd->hc_driver.hub_resume     =
++
++	/* Allocate memory for and initialize the base HCD and  */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
++	syshcd = usb_create_hcd(&_ifxhcd->hc_driver, _ifxhcd->dev, _ifxhcd->core_if.core_name);
++#else
++	syshcd = usb_create_hcd(&_ifxhcd->hc_driver, _ifxhcd->dev, _ifxhcd->dev->bus_id);
++#endif
++
++	if (syshcd == NULL)
++	{
++		retval = -ENOMEM;
++		goto error1;
++	}
++	
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
++	syshcd->has_tt = 1;
++#endif
++
++	syshcd->rsrc_start = (unsigned long)_ifxhcd->core_if.core_global_regs;
++	syshcd->regs       = (void *)_ifxhcd->core_if.core_global_regs;
++	syshcd->self.otg_port = 0;
++
++	//*((unsigned long *)(&(syshcd->hcd_priv)))=(unsigned long)_ifxhcd;
++	//*((unsigned long *)(&(syshcd->hcd_priv[0])))=(unsigned long)_ifxhcd;
++	syshcd->hcd_priv[0]=(unsigned long)_ifxhcd;
++	_ifxhcd->syshcd=syshcd;
++
++	INIT_LIST_HEAD(&_ifxhcd->epqh_np_active   );
++	INIT_LIST_HEAD(&_ifxhcd->epqh_np_ready    );
++	INIT_LIST_HEAD(&_ifxhcd->epqh_intr_active );
++	INIT_LIST_HEAD(&_ifxhcd->epqh_intr_ready  );
++	#ifdef __EN_ISOC__
++		INIT_LIST_HEAD(&_ifxhcd->epqh_isoc_active );
++		INIT_LIST_HEAD(&_ifxhcd->epqh_isoc_ready  );
++	#endif
++	INIT_LIST_HEAD(&_ifxhcd->epqh_stdby       );
++	INIT_LIST_HEAD(&_ifxhcd->urbd_complete_list);
++
++	/*
++	 * Create a host channel descriptor for each host channel implemented
++	 * in the controller. Initialize the channel descriptor array.
++	 */
++	INIT_LIST_HEAD(&_ifxhcd->free_hc_list);
++	{
++		int          num_channels = _ifxhcd->core_if.params.host_channels;
++		int i;
++		for (i = 0; i < num_channels; i++)
++		{
++			_ifxhcd->ifxhc[i].hc_num = i;
++			IFX_DEBUGPL(DBG_HCDV, "HCD Added channel #%d\n", i);
++		}
++	}
++
++	/* Set device flags indicating whether the HCD supports DMA. */
++	if(_ifxhcd->dev->dma_mask)
++		*(_ifxhcd->dev->dma_mask) = ~0;
++	_ifxhcd->dev->coherent_dma_mask = ~0;
++
++	/*
++	 * Finish generic HCD initialization and start the HCD. This function
++	 * allocates the DMA buffer pool, registers the USB bus, requests the
++	 * IRQ line, and calls ifxusb_hcd_start method.
++	 */
++//	retval = usb_add_hcd(syshcd, _ifxhcd->core_if.irq, SA_INTERRUPT|SA_SHIRQ);
++	retval = usb_add_hcd(syshcd, _ifxhcd->core_if.irq, IRQF_DISABLED | IRQF_SHARED );
++	if (retval < 0)
++		goto error2;
++
++	/*
++	 * Allocate space for storing data on status transactions. Normally no
++	 * data is sent, but this space acts as a bit bucket. This must be
++	 * done after usb_add_hcd since that function allocates the DMA buffer
++	 * pool.
++	 */
++	_ifxhcd->status_buf = ifxusb_alloc_buf(IFXHCD_STATUS_BUF_SIZE, 1);
++
++	if (_ifxhcd->status_buf)
++	{
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
++		IFX_DEBUGPL(DBG_HCD, "IFX USB HCD Initialized, bus=%s, usbbus=%d\n", _ifxhcd->core_if.core_name, syshcd->self.busnum);
++#else
++		IFX_DEBUGPL(DBG_HCD, "IFX USB HCD Initialized, bus=%s, usbbus=%d\n", _ifxhcd->dev->bus_id, syshcd->self.busnum);
++#endif
++		return 0;
++	}
++	IFX_ERROR("%s: status_buf allocation failed\n", __func__);
++
++	/* Error conditions */
++	usb_remove_hcd(syshcd);
++error2:
++	ifxhcd_freeextra(syshcd);
++	usb_put_hcd(syshcd);
++error1:
++	return retval;
++}
++
++/*!
++   \brief Removes the HCD.
++  Frees memory and resources associated with the HCD and deregisters the bus.
++ */
++void ifxhcd_remove(ifxhcd_hcd_t *_ifxhcd)
++{
++	struct usb_hcd *syshcd = ifxhcd_to_syshcd(_ifxhcd);
++
++	IFX_DEBUGPL(DBG_HCD, "IFX USB HCD REMOVE\n");
++
++/* == AVM/WK 20100709 - Fix: Order changed, disable IRQs not before remove_hcd == */
++
++	usb_remove_hcd(syshcd);
++
++	/* Turn off all interrupts */
++	ifxusb_wreg (&_ifxhcd->core_if.core_global_regs->gintmsk, 0);
++	ifxusb_mreg (&_ifxhcd->core_if.core_global_regs->gahbcfg, 1, 0);
++
++	ifxhcd_freeextra(syshcd);
++
++	usb_put_hcd(syshcd);
++
++	return;
++}
++
++
++/* =========================================================================
++ *  Linux HC Driver Functions
++ * ========================================================================= */
++
++/*!
++   \brief Initializes the IFXUSB controller and its root hub and prepares it for host
++ mode operation. Activates the root port. Returns 0 on success and a negative
++ error code on failure.
++ Called by USB stack.
++ */
++int ifxhcd_start(struct usb_hcd *_syshcd)
++{
++	ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd (_syshcd);
++	ifxusb_core_if_t *core_if = &ifxhcd->core_if;
++	struct usb_bus *bus;
++
++	IFX_DEBUGPL(DBG_HCD, "IFX USB HCD START\n");
++
++	bus = hcd_to_bus(_syshcd);
++
++	/* Initialize the bus state.  */
++	_syshcd->state = HC_STATE_RUNNING;
++
++	/* Initialize and connect root hub if one is not already attached */
++	if (bus->root_hub)
++	{
++		IFX_DEBUGPL(DBG_HCD, "IFX USB HCD Has Root Hub\n");
++		/* Inform the HUB driver to resume. */
++		usb_hcd_resume_root_hub(_syshcd);
++	}
++
++	ifxhcd->flags.d32 = 0;
++
++	/* Put all channels in the free channel list and clean up channel states.*/
++	{
++		struct list_head 	*item;
++		item = ifxhcd->free_hc_list.next;
++		while (item != &ifxhcd->free_hc_list)
++		{
++			list_del(item);
++			item = ifxhcd->free_hc_list.next;
++		}
++	}
++	{
++		int num_channels = ifxhcd->core_if.params.host_channels;
++		int i;
++		for (i = 0; i < num_channels; i++)
++		{
++			ifxhcd_hc_t      *channel;
++			channel = &ifxhcd->ifxhc[i];
++			list_add_tail(&channel->hc_list_entry, &ifxhcd->free_hc_list);
++			ifxhcd_hc_cleanup(&ifxhcd->core_if, channel);
++		}
++	}
++	/* Initialize the USB core for host mode operation. */
++
++	ifxusb_host_enable_interrupts(core_if);
++	ifxusb_enable_global_interrupts(core_if);
++	ifxusb_phy_power_on (core_if);
++
++	ifxusb_vbus_init(core_if);
++
++	/* Turn on the vbus power. */
++	{
++		hprt0_data_t hprt0;
++		hprt0.d32 = ifxusb_read_hprt0(core_if);
++
++		IFX_PRINT("Init: Power Port (%d)\n", hprt0.b.prtpwr);
++		if (hprt0.b.prtpwr == 0 )
++		{
++			hprt0.b.prtpwr = 1;
++			ifxusb_wreg(core_if->hprt0, hprt0.d32);
++			ifxusb_vbus_on(core_if);
++		}
++	}
++	return 0;
++}
++
++
++/*!
++   \brief Halts the IFXUSB  host mode operations in a clean manner. USB transfers are
++ stopped.
++ */
++void ifxhcd_stop(struct usb_hcd *_syshcd)
++{
++	ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd(_syshcd);
++	hprt0_data_t  hprt0 = { .d32=0 };
++
++	IFX_DEBUGPL(DBG_HCD, "IFX USB HCD STOP\n");
++
++	/* Turn off all interrupts. */
++	ifxusb_disable_global_interrupts(&ifxhcd->core_if );
++	ifxusb_host_disable_interrupts(&ifxhcd->core_if );
++#ifdef __USE_TIMER_4_SOF__
++	hrtimer_cancel(&ifxhcd->hr_timer);
++#endif
++	/*
++	 * The root hub should be disconnected before this function is called.
++	 * The disconnect will clear the URBD lists (via ..._hcd_urb_dequeue)
++	 * and the EPQH lists (via ..._hcd_endpoint_disable).
++	 */
++
++	/* Turn off the vbus power */
++	IFX_PRINT("PortPower off\n");
++
++	ifxusb_vbus_off(&ifxhcd->core_if );
++
++	ifxusb_vbus_free(&ifxhcd->core_if );
++
++	hprt0.b.prtpwr = 0;
++	ifxusb_wreg(ifxhcd->core_if.hprt0, hprt0.d32);
++	return;
++}
++
++/*!
++   \brief Returns the current frame number
++ */
++int ifxhcd_get_frame_number(struct usb_hcd *_syshcd)
++{
++	ifxhcd_hcd_t 	*ifxhcd = syshcd_to_ifxhcd(_syshcd);
++	hfnum_data_t hfnum;
++
++	hfnum.d32 = ifxusb_rreg(&ifxhcd->core_if.host_global_regs->hfnum);
++
++	return hfnum.b.frnum;
++}
++
++/*!
++   \brief Starts processing a USB transfer request specified by a USB Request Block
++  (URB). mem_flags indicates the type of memory allocation to use while
++  processing this URB.
++ */
++int ifxhcd_urb_enqueue( struct usb_hcd           *_syshcd,
++                        /*--- struct usb_host_endpoint *_sysep, Parameter im 2.6.28 entfallen ---*/
++                        struct urb               *_urb,
++                        gfp_t                     _mem_flags)
++{
++	int retval = 0;
++	ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd (_syshcd);
++	struct usb_host_endpoint *_sysep = ifxhcd_urb_to_endpoint(_urb);
++	ifxhcd_epqh_t *epqh;
++
++	#ifdef __DEBUG__
++		if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB))
++			dump_urb_info(_urb, "ifxusb_hcd_urb_enqueue");
++	#endif //__DEBUG__
++
++	if (!ifxhcd->flags.b.port_connect_status)  /* No longer connected. */
++		return -ENODEV;
++
++	#ifndef __EN_ISOC__
++		if(usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS)
++		{
++			IFX_ERROR("ISOC transfer not supported!!!\n");
++			return -ENODEV;
++		}
++	#endif
++
++	retval=ifxhcd_urbd_create (ifxhcd,_urb);
++
++	if (retval)
++	{
++		IFX_ERROR("IFXUSB HCD URB Enqueue failed creating URBD\n");
++		return retval;
++	}
++	epqh = (ifxhcd_epqh_t *) _sysep->hcpriv;
++	ifxhcd_epqh_ready(ifxhcd, epqh);
++
++	select_eps(ifxhcd);
++	//enable_sof(ifxhcd);
++	{
++		gint_data_t gintsts;
++		gintsts.d32=0;
++		gintsts.b.sofintr = 1;
++		ifxusb_mreg(&ifxhcd->core_if.core_global_regs->gintmsk, 0,gintsts.d32);
++	}
++
++	return retval;
++}
++
++/*!
++   \brief Aborts/cancels a USB transfer request. Always returns 0 to indicate
++  success.
++ */
++int ifxhcd_urb_dequeue( struct usb_hcd *_syshcd,
++                        struct urb *_urb, int status /* Parameter neu in 2.6.28 */)
++{
++	unsigned long flags;
++	ifxhcd_hcd_t  *ifxhcd;
++	ifxhcd_urbd_t *urbd;
++	ifxhcd_epqh_t *epqh;
++	int is_active=0;
++	int rc;
++
++	struct usb_host_endpoint *_sysep;
++
++	IFX_DEBUGPL(DBG_HCD, "IFXUSB HCD URB Dequeue\n");
++
++	#ifndef __EN_ISOC__
++		if(usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS)
++			return 0;
++	#endif
++
++	_sysep = ifxhcd_urb_to_endpoint(_urb);
++
++	ifxhcd = syshcd_to_ifxhcd(_syshcd);
++
++	SPIN_LOCK_IRQSAVE(&ifxhcd->lock, flags);
++
++	/*== AVM/BC 20100630 - 2.6.28 needs HCD link/unlink URBs ==*/
++	rc = usb_hcd_check_unlink_urb(_syshcd, _urb, status);
++	if (rc) {
++		SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags);
++		return rc;
++	}
++
++	urbd = (ifxhcd_urbd_t *) _urb->hcpriv;
++
++	if(_sysep)
++		epqh = (ifxhcd_epqh_t *) _sysep->hcpriv;
++	else
++		epqh = (ifxhcd_epqh_t *) urbd->epqh;
++
++	if(epqh!=urbd->epqh)
++		IFX_ERROR("%s inconsistant epqh %p %p\n",__func__,epqh,urbd->epqh);
++
++	#ifdef __DEBUG__
++		if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB))
++		{
++			dump_urb_info(_urb, "ifxhcd_urb_dequeue");
++			if (epqh->is_active)
++				dump_channel_info(ifxhcd, epqh);
++		}
++	#endif //__DEBUG__
++
++	if(!epqh->hc)
++		epqh->is_active=0;
++	else if (!ifxhcd->flags.b.port_connect_status)
++			epqh->is_active=0;
++	else if (epqh->is_active && urbd->is_active)
++	{
++		/*== AVM/WK 20100709 - halt channel only if really started ==*/
++		//if (epqh->hc->xfer_started && !epqh->hc->wait_for_sof) {
++		/*== AVM/WK 20101112 - halt channel if started ==*/
++		if (epqh->hc->xfer_started) {
++			/*
++			 * If still connected (i.e. in host mode), halt the
++			 * channel so it can be used for other transfers. If
++			 * no longer connected, the host registers can't be
++			 * written to halt the channel since the core is in
++			 * device mode.
++			 */
++			/* == 20110803 AVM/WK FIX propagate status == */
++			if (_urb->status == -EINPROGRESS) {
++				_urb->status = status;
++			}
++			ifxhcd_hc_halt(&ifxhcd->core_if, epqh->hc, HC_XFER_URB_DEQUEUE);
++			epqh->hc = NULL;
++			is_active=1;
++		}
++	}
++
++	if(is_active)
++	{
++		SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags);
++	}
++	else
++	{
++		list_del_init(&urbd->urbd_list_entry);
++		kfree (urbd);
++
++		/*== AVM/BC 20100630 - 2.6.28 needs HCD link/unlink URBs ==*/
++		usb_hcd_unlink_urb_from_ep(_syshcd, _urb);
++
++		SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags);
++		_urb->hcpriv = NULL;
++//		usb_hcd_giveback_urb(_syshcd, _urb);
++		usb_hcd_giveback_urb(_syshcd, _urb, status /* neu in 2.6.28 */);
++		select_eps(ifxhcd);
++	}
++
++	return 0;
++}
++
++
++
++/*!
++   \brief Frees resources in the IFXUSB controller related to a given endpoint. Also
++  clears state in the HCD related to the endpoint. Any URBs for the endpoint
++  must already be dequeued.
++ */
++void ifxhcd_endpoint_disable( struct usb_hcd *_syshcd,
++                              struct usb_host_endpoint *_sysep)
++{
++	ifxhcd_epqh_t *epqh;
++	ifxhcd_hcd_t  *ifxhcd = syshcd_to_ifxhcd(_syshcd);
++	unsigned long flags;
++
++	int retry = 0;
++
++	IFX_DEBUGPL(DBG_HCD, "IFXUSB HCD EP DISABLE: _bEndpointAddress=0x%02x, "
++	    "endpoint=%d\n", _sysep->desc.bEndpointAddress,
++		    ifxhcd_ep_addr_to_endpoint(_sysep->desc.bEndpointAddress));
++
++	SPIN_LOCK_IRQSAVE(&ifxhcd->lock, flags);
++	if((uint32_t)_sysep>=0x80000000 && (uint32_t)_sysep->hcpriv>=(uint32_t)0x80000000)
++	{
++		epqh = (ifxhcd_epqh_t *)(_sysep->hcpriv);
++		if (epqh && epqh->sysep==_sysep)
++		{
++
++#if 1  /*== AVM/BC 20101111 CHG Option active: Kill URBs when disabling EP  ==*/
++			while (!list_empty(&epqh->urbd_list))
++			{
++				if (retry++ > 250)
++				{
++					IFX_WARN("IFXUSB HCD EP DISABLE:"
++						 " URBD List for this endpoint is not empty\n");
++					break;
++				}
++				kill_all_urbs_in_epqh(ifxhcd, epqh, -ETIMEDOUT);
++			}
++#else
++			while (!list_empty(&epqh->urbd_list))
++			{
++				/** Check that the QTD list is really empty */
++				if (retry++ > 250)
++				{
++					IFX_WARN("IFXUSB HCD EP DISABLE:"
++						 " URBD List for this endpoint is not empty\n");
++					break;
++				}
++				SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags);
++				schedule_timeout_uninterruptible(1);
++				SPIN_LOCK_IRQSAVE(&ifxhcd->lock, flags);
++			}
++#endif
++
++			ifxhcd_epqh_free(epqh);
++			_sysep->hcpriv = NULL;
++		}
++	}
++	SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags);
++}
++
++
++/*!
++   \brief Handles host mode interrupts for the IFXUSB controller. Returns IRQ_NONE if
++ * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid
++ * interrupt.
++ *
++ * This function is called by the USB core when an interrupt occurs
++ */
++irqreturn_t ifxhcd_irq(struct usb_hcd *_syshcd)
++{
++	ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd (_syshcd);
++    int32_t retval=0;
++
++	//mask_and_ack_ifx_irq (ifxhcd->core_if.irq);
++	retval = ifxhcd_handle_intr(ifxhcd);
++	return IRQ_RETVAL(retval);
++}
++
++
++/*!
++   \brief Handles host mode Over Current Interrupt
++ */
++irqreturn_t ifxhcd_oc_irq(int _irq , void *_dev)
++{
++	ifxhcd_hcd_t *ifxhcd = _dev;
++	int32_t retval=1;
++
++	ifxhcd->flags.b.port_over_current_change = 1;
++	ifxusb_vbus_off(&ifxhcd->core_if);
++	IFX_DEBUGP("OC INTERRUPT # %d\n",ifxhcd->core_if.core_no);
++
++	//mask_and_ack_ifx_irq (_irq);
++	return IRQ_RETVAL(retval);
++}
++
++/*!
++ \brief Creates Status Change bitmap for the root hub and root port. The bitmap is
++  returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1
++  is the status change indicator for the single root port. Returns 1 if either
++  change indicator is 1, otherwise returns 0.
++ */
++int ifxhcd_hub_status_data(struct usb_hcd *_syshcd, char *_buf)
++{
++	ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd (_syshcd);
++
++	_buf[0] = 0;
++	_buf[0] |= (ifxhcd->flags.b.port_connect_status_change ||
++	            ifxhcd->flags.b.port_reset_change ||
++	            ifxhcd->flags.b.port_enable_change ||
++	            ifxhcd->flags.b.port_suspend_change ||
++	            ifxhcd->flags.b.port_over_current_change) << 1;
++
++	#ifdef __DEBUG__
++		if (_buf[0])
++		{
++			IFX_DEBUGPL(DBG_HCD, "IFXUSB HCD HUB STATUS DATA:"
++				    " Root port status changed\n");
++			IFX_DEBUGPL(DBG_HCDV, "  port_connect_status_change: %d\n",
++				    ifxhcd->flags.b.port_connect_status_change);
++			IFX_DEBUGPL(DBG_HCDV, "  port_reset_change: %d\n",
++				    ifxhcd->flags.b.port_reset_change);
++			IFX_DEBUGPL(DBG_HCDV, "  port_enable_change: %d\n",
++				    ifxhcd->flags.b.port_enable_change);
++			IFX_DEBUGPL(DBG_HCDV, "  port_suspend_change: %d\n",
++				    ifxhcd->flags.b.port_suspend_change);
++			IFX_DEBUGPL(DBG_HCDV, "  port_over_current_change: %d\n",
++				    ifxhcd->flags.b.port_over_current_change);
++		}
++	#endif //__DEBUG__
++	return (_buf[0] != 0);
++}
++
++#ifdef __WITH_HS_ELECT_TST__
++	extern void do_setup(ifxusb_core_if_t *_core_if) ;
++	extern void do_in_ack(ifxusb_core_if_t *_core_if);
++#endif //__WITH_HS_ELECT_TST__
++
++/*!
++ \brief Handles hub class-specific requests.
++ */
++int ifxhcd_hub_control( struct usb_hcd *_syshcd,
++                        u16             _typeReq,
++                        u16             _wValue,
++                        u16             _wIndex,
++                        char           *_buf,
++                        u16             _wLength)
++{
++	int retval = 0;
++
++	ifxhcd_hcd_t              *ifxhcd  = syshcd_to_ifxhcd (_syshcd);
++	ifxusb_core_if_t          *core_if = &ifxhcd->core_if;
++	struct usb_hub_descriptor *desc;
++	hprt0_data_t               hprt0 = {.d32 = 0};
++
++	uint32_t port_status;
++
++	switch (_typeReq)
++	{
++		case ClearHubFeature:
++			IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++			         "ClearHubFeature 0x%x\n", _wValue);
++			switch (_wValue)
++			{
++				case C_HUB_LOCAL_POWER:
++				case C_HUB_OVER_CURRENT:
++					/* Nothing required here */
++					break;
++				default:
++					retval = -EINVAL;
++					IFX_ERROR ("IFXUSB HCD - "
++						   "ClearHubFeature request %xh unknown\n", _wValue);
++			}
++			break;
++		case ClearPortFeature:
++			if (!_wIndex || _wIndex > 1)
++				goto error;
++
++			switch (_wValue)
++			{
++				case USB_PORT_FEAT_ENABLE:
++					IFX_DEBUGPL (DBG_ANY, "IFXUSB HCD HUB CONTROL - "
++						     "ClearPortFeature USB_PORT_FEAT_ENABLE\n");
++					hprt0.d32 = ifxusb_read_hprt0 (core_if);
++					hprt0.b.prtena = 1;
++					ifxusb_wreg(core_if->hprt0, hprt0.d32);
++					break;
++				case USB_PORT_FEAT_SUSPEND:
++					IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++						     "ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
++					hprt0.d32 = ifxusb_read_hprt0 (core_if);
++					hprt0.b.prtres = 1;
++					ifxusb_wreg(core_if->hprt0, hprt0.d32);
++					/* Clear Resume bit */
++					mdelay (100);
++					hprt0.b.prtres = 0;
++					ifxusb_wreg(core_if->hprt0, hprt0.d32);
++					break;
++				case USB_PORT_FEAT_POWER:
++					IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++						     "ClearPortFeature USB_PORT_FEAT_POWER\n");
++					#ifdef __IS_DUAL__
++						ifxusb_vbus_off(core_if);
++					#else
++						ifxusb_vbus_off(core_if);
++					#endif
++					hprt0.d32 = ifxusb_read_hprt0 (core_if);
++					hprt0.b.prtpwr = 0;
++					ifxusb_wreg(core_if->hprt0, hprt0.d32);
++					break;
++				case USB_PORT_FEAT_INDICATOR:
++					IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++						     "ClearPortFeature USB_PORT_FEAT_INDICATOR\n");
++					/* Port inidicator not supported */
++					break;
++				case USB_PORT_FEAT_C_CONNECTION:
++					/* Clears drivers internal connect status change
++					 * flag */
++					IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++						     "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n");
++					ifxhcd->flags.b.port_connect_status_change = 0;
++					break;
++				case USB_PORT_FEAT_C_RESET:
++					/* Clears the driver's internal Port Reset Change
++					 * flag */
++					IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++						     "ClearPortFeature USB_PORT_FEAT_C_RESET\n");
++					ifxhcd->flags.b.port_reset_change = 0;
++					break;
++				case USB_PORT_FEAT_C_ENABLE:
++					/* Clears the driver's internal Port
++					 * Enable/Disable Change flag */
++					IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++						     "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n");
++					ifxhcd->flags.b.port_enable_change = 0;
++					break;
++				case USB_PORT_FEAT_C_SUSPEND:
++					/* Clears the driver's internal Port Suspend
++					 * Change flag, which is set when resume signaling on
++					 * the host port is complete */
++					IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++						     "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n");
++					ifxhcd->flags.b.port_suspend_change = 0;
++					break;
++				case USB_PORT_FEAT_C_OVER_CURRENT:
++					IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++						     "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n");
++					ifxhcd->flags.b.port_over_current_change = 0;
++					break;
++				default:
++					retval = -EINVAL;
++					IFX_ERROR ("IFXUSB HCD - "
++					         "ClearPortFeature request %xh "
++					         "unknown or unsupported\n", _wValue);
++			}
++			break;
++		case GetHubDescriptor:
++			IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++			         "GetHubDescriptor\n");
++			desc = (struct usb_hub_descriptor *)_buf;
++			desc->bDescLength = 9;
++			desc->bDescriptorType = 0x29;
++			desc->bNbrPorts = 1;
++			desc->wHubCharacteristics = 0x08;
++			desc->bPwrOn2PwrGood = 1;
++			desc->bHubContrCurrent = 0;
++//			desc->bitmap[0] = 0;
++//			desc->bitmap[1] = 0xff;
++			break;
++		case GetHubStatus:
++			IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++			         "GetHubStatus\n");
++			memset (_buf, 0, 4);
++			break;
++		case GetPortStatus:
++			IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++			         "GetPortStatus\n");
++			if (!_wIndex || _wIndex > 1)
++				goto error;
++
++#       	ifdef CONFIG_AVM_POWERMETER
++			{
++				/* first port only, but 2 Hosts */
++				static unsigned char ucOldPower1 = 255;
++				static unsigned char ucOldPower2 = 255;
++
++				unsigned char ucNewPower = 0;
++				struct usb_device *childdev = _syshcd->self.root_hub->children[0];
++
++				if (childdev != NULL) {
++					ucNewPower = (childdev->actconfig != NULL)
++									? childdev->actconfig->desc.bMaxPower
++									: 50;/* default: 50 means 100 mA*/
++				}
++				if (_syshcd->self.busnum == 1) {
++					if (ucOldPower1 != ucNewPower) {
++						ucOldPower1 = ucNewPower;
++						printk (KERN_INFO "IFXHCD#1: AVM Powermeter changed to %u mA\n", ucNewPower*2);
++						PowerManagmentRessourceInfo(powerdevice_usb_host, ucNewPower*2);
++					}
++				} else {
++					if (ucOldPower2 != ucNewPower) {
++						ucOldPower2 = ucNewPower;
++						printk (KERN_INFO "IFXHCD#2: AVM Powermeter changed to %u mA\n", ucNewPower*2);
++						PowerManagmentRessourceInfo(powerdevice_usb_host2, ucNewPower*2);
++					}
++				}
++			}
++#	        endif  /*--- #ifdef CONFIG_AVM_POWERMETER ---*/
++
++			port_status = 0;
++			if (ifxhcd->flags.b.port_connect_status_change)
++				port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
++			if (ifxhcd->flags.b.port_enable_change)
++				port_status |= (1 << USB_PORT_FEAT_C_ENABLE);
++			if (ifxhcd->flags.b.port_suspend_change)
++				port_status |= (1 << USB_PORT_FEAT_C_SUSPEND);
++			if (ifxhcd->flags.b.port_reset_change)
++				port_status |= (1 << USB_PORT_FEAT_C_RESET);
++			if (ifxhcd->flags.b.port_over_current_change)
++			{
++				IFX_ERROR("Device Not Supported\n");
++				port_status |= (1 << USB_PORT_FEAT_C_OVER_CURRENT);
++			}
++			if (!ifxhcd->flags.b.port_connect_status)
++			{
++				/*
++				 * The port is disconnected, which means the core is
++				 * either in device mode or it soon will be. Just
++				 * return 0's for the remainder of the port status
++				 * since the port register can't be read if the core
++				 * is in device mode.
++				 */
++				*((u32 *) _buf) = cpu_to_le32(port_status);
++				break;
++			}
++
++			hprt0.d32 = ifxusb_rreg(core_if->hprt0);
++			IFX_DEBUGPL(DBG_HCDV, "  HPRT0: 0x%08x\n", hprt0.d32);
++			if (hprt0.b.prtconnsts)
++				port_status |= (1 << USB_PORT_FEAT_CONNECTION);
++			if (hprt0.b.prtena)
++				port_status |= (1 << USB_PORT_FEAT_ENABLE);
++			if (hprt0.b.prtsusp)
++				port_status |= (1 << USB_PORT_FEAT_SUSPEND);
++			if (hprt0.b.prtovrcurract)
++				port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT);
++			if (hprt0.b.prtrst)
++				port_status |= (1 << USB_PORT_FEAT_RESET);
++			if (hprt0.b.prtpwr)
++				port_status |= (1 << USB_PORT_FEAT_POWER);
++/*			if (hprt0.b.prtspd == IFXUSB_HPRT0_PRTSPD_HIGH_SPEED)
++				port_status |= (1 << USB_PORT_FEAT_HIGHSPEED);
++			else if (hprt0.b.prtspd == IFXUSB_HPRT0_PRTSPD_LOW_SPEED)
++				port_status |= (1 << USB_PORT_FEAT_LOWSPEED);*/
++			if (hprt0.b.prttstctl)
++				port_status |= (1 << USB_PORT_FEAT_TEST);
++			/* USB_PORT_FEAT_INDICATOR unsupported always 0 */
++			*((u32 *) _buf) = cpu_to_le32(port_status);
++			break;
++		case SetHubFeature:
++			IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++			         "SetHubFeature\n");
++			/* No HUB features supported */
++			break;
++		case SetPortFeature:
++			if (_wValue != USB_PORT_FEAT_TEST && (!_wIndex || _wIndex > 1))
++				goto error;
++			/*
++			 * The port is disconnected, which means the core is
++			 * either in device mode or it soon will be. Just
++			 * return without doing anything since the port
++			 * register can't be written if the core is in device
++			 * mode.
++			 */
++			if (!ifxhcd->flags.b.port_connect_status)
++				break;
++			switch (_wValue)
++			{
++				case USB_PORT_FEAT_SUSPEND:
++					IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++						     "SetPortFeature - USB_PORT_FEAT_SUSPEND\n");
++					hprt0.d32 = ifxusb_read_hprt0 (core_if);
++					hprt0.b.prtsusp = 1;
++					ifxusb_wreg(core_if->hprt0, hprt0.d32);
++					//IFX_PRINT( "SUSPEND: HPRT0=%0x\n", hprt0.d32);
++					/* Suspend the Phy Clock */
++					{
++						pcgcctl_data_t pcgcctl = {.d32=0};
++						pcgcctl.b.stoppclk = 1;
++						ifxusb_wreg(core_if->pcgcctl, pcgcctl.d32);
++					}
++					break;
++				case USB_PORT_FEAT_POWER:
++					IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++					     "SetPortFeature - USB_PORT_FEAT_POWER\n");
++					ifxusb_vbus_on (core_if);
++					hprt0.d32 = ifxusb_read_hprt0 (core_if);
++					hprt0.b.prtpwr = 1;
++					ifxusb_wreg(core_if->hprt0, hprt0.d32);
++					break;
++				case USB_PORT_FEAT_RESET:
++					IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++						     "SetPortFeature - USB_PORT_FEAT_RESET\n");
++					hprt0.d32 = ifxusb_read_hprt0 (core_if);
++					hprt0.b.prtrst = 1;
++					ifxusb_wreg(core_if->hprt0, hprt0.d32);
++					/* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */
++					MDELAY (60);
++					hprt0.b.prtrst = 0;
++					ifxusb_wreg(core_if->hprt0, hprt0.d32);
++					break;
++			#ifdef __WITH_HS_ELECT_TST__
++				case USB_PORT_FEAT_TEST:
++					{
++						uint32_t t;
++						gint_data_t gintmsk;
++						t = (_wIndex >> 8); /* MSB wIndex USB */
++						IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++							     "SetPortFeature - USB_PORT_FEAT_TEST %d\n", t);
++						warn("USB_PORT_FEAT_TEST %d\n", t);
++						if (t < 6)
++						{
++							hprt0.d32 = ifxusb_read_hprt0 (core_if);
++							hprt0.b.prttstctl = t;
++							ifxusb_wreg(core_if->hprt0, hprt0.d32);
++						}
++						else if (t == 6)  /* HS_HOST_PORT_SUSPEND_RESUME */
++						{
++							/* Save current interrupt mask */
++							gintmsk.d32 = ifxusb_rreg(&core_if->core_global_regs->gintmsk);
++
++							/* Disable all interrupts while we muck with
++							 * the hardware directly
++							 */
++							ifxusb_wreg(&core_if->core_global_regs->gintmsk, 0);
++
++							/* 15 second delay per the test spec */
++							mdelay(15000);
++
++							/* Drive suspend on the root port */
++							hprt0.d32 = ifxusb_read_hprt0 (core_if);
++							hprt0.b.prtsusp = 1;
++							hprt0.b.prtres = 0;
++							ifxusb_wreg(core_if->hprt0, hprt0.d32);
++
++							/* 15 second delay per the test spec */
++							mdelay(15000);
++
++							/* Drive resume on the root port */
++							hprt0.d32 = ifxusb_read_hprt0 (core_if);
++							hprt0.b.prtsusp = 0;
++							hprt0.b.prtres = 1;
++							ifxusb_wreg(core_if->hprt0, hprt0.d32);
++							mdelay(100);
++
++							/* Clear the resume bit */
++							hprt0.b.prtres = 0;
++							ifxusb_wreg(core_if->hprt0, hprt0.d32);
++
++							/* Restore interrupts */
++							ifxusb_wreg(&core_if->core_global_regs->gintmsk, gintmsk.d32);
++						}
++						else if (t == 7)  /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */
++						{
++							/* Save current interrupt mask */
++							gintmsk.d32 = ifxusb_rreg(&core_if->core_global_regs->gintmsk);
++
++							/* Disable all interrupts while we muck with
++							 * the hardware directly
++							 */
++							ifxusb_wreg(&core_if->core_global_regs->gintmsk, 0);
++
++							/* 15 second delay per the test spec */
++							mdelay(15000);
++
++							/* Send the Setup packet */
++							do_setup(core_if);
++
++							/* 15 second delay so nothing else happens for awhile */
++							mdelay(15000);
++
++							/* Restore interrupts */
++							ifxusb_wreg(&core_if->core_global_regs->gintmsk, gintmsk.d32);
++						}
++
++						else if (t == 8)  /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */
++						{
++							/* Save current interrupt mask */
++							gintmsk.d32 = ifxusb_rreg(&core_if->core_global_regs->gintmsk);
++
++							/* Disable all interrupts while we muck with
++							 * the hardware directly
++							 */
++							ifxusb_wreg(&core_if->core_global_regs->gintmsk, 0);
++
++							/* Send the Setup packet */
++							do_setup(core_if);
++
++							/* 15 second delay so nothing else happens for awhile */
++							mdelay(15000);
++
++							/* Send the In and Ack packets */
++							do_in_ack(core_if);
++
++							/* 15 second delay so nothing else happens for awhile */
++							mdelay(15000);
++
++							/* Restore interrupts */
++							ifxusb_wreg(&core_if->core_global_regs->gintmsk, gintmsk.d32);
++						}
++					}
++					break;
++			#endif //__WITH_HS_ELECT_TST__
++				case USB_PORT_FEAT_INDICATOR:
++					IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++						     "SetPortFeature - USB_PORT_FEAT_INDICATOR\n");
++					/* Not supported */
++					break;
++				default:
++					retval = -EINVAL;
++					IFX_ERROR ("IFXUSB HCD - "
++						   "SetPortFeature request %xh "
++						   "unknown or unsupported\n", _wValue);
++			}
++			break;
++		default:
++		error:
++			retval = -EINVAL;
++			IFX_WARN ("IFXUSB HCD - "
++			          "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n",
++			          _typeReq, _wIndex, _wValue);
++	}
++	return retval;
++}
++
++
++/*!
++ \brief Assigns transactions from a URBD to a free host channel and initializes the
++ host channel to perform the transactions. The host channel is removed from
++ the free list.
++ \param _ifxhcd The HCD state structure.
++ \param _epqh Transactions from the first URBD for this EPQH are selected and assigned to a free host channel.
++ */
++static int assign_and_init_hc(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh)
++{
++	ifxhcd_hc_t   *ifxhc;
++	ifxhcd_urbd_t *urbd;
++	struct urb    *urb;
++
++	IFX_DEBUGPL(DBG_HCDV, "%s(%p,%p)\n", __func__, _ifxhcd, _epqh);
++
++	if(list_empty(&_epqh->urbd_list))
++		return 0;
++
++	ifxhc = list_entry(_ifxhcd->free_hc_list.next, ifxhcd_hc_t, hc_list_entry);
++	/* Remove the host channel from the free list. */
++	list_del_init(&ifxhc->hc_list_entry);
++
++	urbd = list_entry(_epqh->urbd_list.next, ifxhcd_urbd_t, urbd_list_entry);
++	urb  = urbd->urb;
++
++	_epqh->hc   = ifxhc;
++	_epqh->urbd = urbd;
++	ifxhc->epqh = _epqh;
++
++	urbd->is_active=1;
++
++	/*
++	 * Use usb_pipedevice to determine device address. This address is
++	 * 0 before the SET_ADDRESS command and the correct address afterward.
++	 */
++	ifxhc->dev_addr = usb_pipedevice(urb->pipe);
++	ifxhc->ep_num   = usb_pipeendpoint(urb->pipe);
++
++	ifxhc->xfer_started   = 0;
++
++	if      (urb->dev->speed == USB_SPEED_LOW)  ifxhc->speed = IFXUSB_EP_SPEED_LOW;
++	else if (urb->dev->speed == USB_SPEED_FULL) ifxhc->speed = IFXUSB_EP_SPEED_FULL;
++	else                                        ifxhc->speed = IFXUSB_EP_SPEED_HIGH;
++
++	ifxhc->mps         = _epqh->mps;
++	ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
++
++	ifxhc->ep_type = _epqh->ep_type;
++
++	if(_epqh->ep_type==IFXUSB_EP_TYPE_CTRL)
++	{
++		ifxhc->control_phase=IFXHCD_CONTROL_SETUP;
++		ifxhc->is_in          = 0;
++		ifxhc->data_pid_start = IFXUSB_HC_PID_SETUP;
++		ifxhc->xfer_buff      = urbd->setup_buff;
++		ifxhc->xfer_len       = 8;
++		ifxhc->xfer_count     = 0;
++		ifxhc->short_rw       =(urb->transfer_flags & URB_ZERO_PACKET)?1:0;
++	}
++	else
++	{
++		ifxhc->is_in          = urbd->is_in;
++		ifxhc->xfer_buff      = urbd->xfer_buff;
++		ifxhc->xfer_len       = urbd->xfer_len;
++		ifxhc->xfer_count     = 0;
++		/* == AVM/WK 20100710 Fix - Use toggle of usbcore ==*/
++		//ifxhc->data_pid_start = _epqh->data_toggle;
++		ifxhc->data_pid_start = usb_gettoggle (urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout (urb->pipe))
++								? IFXUSB_HC_PID_DATA1
++								: IFXUSB_HC_PID_DATA0;
++		if(ifxhc->is_in)
++			ifxhc->short_rw       =0;
++		else
++			ifxhc->short_rw       =(urb->transfer_flags & URB_ZERO_PACKET)?1:0;
++
++		#ifdef __EN_ISOC__
++			if(_epqh->ep_type==IFXUSB_EP_TYPE_ISOC)
++			{
++				struct usb_iso_packet_descriptor *frame_desc;
++				frame_desc = &urb->iso_frame_desc[urbd->isoc_frame_index];
++				ifxhc->xfer_buff += frame_desc->offset + urbd->isoc_split_offset;
++				ifxhc->xfer_len   = frame_desc->length - urbd->isoc_split_offset;
++				if (ifxhc->isoc_xact_pos == IFXUSB_HCSPLIT_XACTPOS_ALL)
++				{
++					if (ifxhc->xfer_len <= 188)
++						ifxhc->isoc_xact_pos = IFXUSB_HCSPLIT_XACTPOS_ALL;
++					else
++						ifxhc->isoc_xact_pos = IFXUSB_HCSPLIT_XACTPOS_BEGIN;
++				}
++			}
++		#endif
++	}
++
++	ifxhc->do_ping=0;
++	if (_ifxhcd->core_if.snpsid < 0x4f54271a && ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
++		ifxhc->do_ping=1;
++
++
++	/* Set the split attributes */
++	ifxhc->split = 0;
++	if (_epqh->need_split) {
++		ifxhc->split = 1;
++		ifxhc->hub_addr       = urb->dev->tt->hub->devnum;
++		ifxhc->port_addr      = urb->dev->ttport;
++	}
++
++	//ifxhc->uint16_t pkt_count_limit
++
++	{
++		hcint_data_t      hc_intr_mask;
++		uint8_t           hc_num = ifxhc->hc_num;
++		ifxusb_hc_regs_t *hc_regs = _ifxhcd->core_if.hc_regs[hc_num];
++
++		/* Clear old interrupt conditions for this host channel. */
++		hc_intr_mask.d32 = 0xFFFFFFFF;
++		hc_intr_mask.b.reserved = 0;
++		ifxusb_wreg(&hc_regs->hcint, hc_intr_mask.d32);
++
++		/* Enable channel interrupts required for this transfer. */
++		hc_intr_mask.d32 = 0;
++		hc_intr_mask.b.chhltd = 1;
++		hc_intr_mask.b.ahberr = 1;
++
++		ifxusb_wreg(&hc_regs->hcintmsk, hc_intr_mask.d32);
++
++		/* Enable the top level host channel interrupt. */
++		{
++			uint32_t          intr_enable;
++			intr_enable = (1 << hc_num);
++			ifxusb_mreg(&_ifxhcd->core_if.host_global_regs->haintmsk, 0, intr_enable);
++		}
++
++		/* Make sure host channel interrupts are enabled. */
++		{
++			gint_data_t       gintmsk ={.d32 = 0};
++			gintmsk.b.hcintr = 1;
++			ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk, 0, gintmsk.d32);
++		}
++
++		/*
++		 * Program the HCCHARn register with the endpoint characteristics for
++		 * the current transfer.
++		 */
++		{
++			hcchar_data_t     hcchar;
++
++			hcchar.d32 = 0;
++			hcchar.b.devaddr   =  ifxhc->dev_addr;
++			hcchar.b.epnum     =  ifxhc->ep_num;
++			hcchar.b.lspddev   = (ifxhc->speed == IFXUSB_EP_SPEED_LOW);
++			hcchar.b.eptype    =  ifxhc->ep_type;
++			hcchar.b.mps       =  ifxhc->mps;
++			ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
++
++			IFX_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, ifxhc->hc_num);
++			IFX_DEBUGPL(DBG_HCDV, "  Dev Addr: %d\n"    , hcchar.b.devaddr);
++			IFX_DEBUGPL(DBG_HCDV, "  Ep Num: %d\n"      , hcchar.b.epnum);
++			IFX_DEBUGPL(DBG_HCDV, "  Is Low Speed: %d\n", hcchar.b.lspddev);
++			IFX_DEBUGPL(DBG_HCDV, "  Ep Type: %d\n"     , hcchar.b.eptype);
++			IFX_DEBUGPL(DBG_HCDV, "  Max Pkt: %d\n"     , hcchar.b.mps);
++			IFX_DEBUGPL(DBG_HCDV, "  Multi Cnt: %d\n"   , hcchar.b.multicnt);
++		}
++		/* Program the HCSPLIT register for SPLITs */
++		{
++			hcsplt_data_t     hcsplt;
++
++			hcsplt.d32 = 0;
++			if (ifxhc->split)
++			{
++				IFX_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", ifxhc->hc_num,
++					   (ifxhc->split==2) ? "CSPLIT" : "SSPLIT");
++				hcsplt.b.spltena  = 1;
++				hcsplt.b.compsplt = (ifxhc->split==2);
++				#ifdef __EN_ISOC__
++					if(_epqh->ep_type==IFXUSB_EP_TYPE_ISOC)
++						hcsplt.b.xactpos  = ifxhc->isoc_xact_pos;
++					else
++				#endif
++					hcsplt.b.xactpos  = IFXUSB_HCSPLIT_XACTPOS_ALL;
++				hcsplt.b.hubaddr  = ifxhc->hub_addr;
++				hcsplt.b.prtaddr  = ifxhc->port_addr;
++				IFX_DEBUGPL(DBG_HCDV, "   comp split %d\n" , hcsplt.b.compsplt);
++				IFX_DEBUGPL(DBG_HCDV, "   xact pos %d\n"   , hcsplt.b.xactpos);
++				IFX_DEBUGPL(DBG_HCDV, "   hub addr %d\n"   , hcsplt.b.hubaddr);
++				IFX_DEBUGPL(DBG_HCDV, "   port addr %d\n"  , hcsplt.b.prtaddr);
++				IFX_DEBUGPL(DBG_HCDV, "   is_in %d\n"      , ifxhc->is_in);
++				IFX_DEBUGPL(DBG_HCDV, "   Max Pkt: %d\n"   , ifxhc->mps);
++				IFX_DEBUGPL(DBG_HCDV, "   xferlen: %d\n"   , ifxhc->xfer_len);
++			}
++			ifxusb_wreg(&hc_regs->hcsplt, hcsplt.d32);
++		}
++	}
++
++	ifxhc->nak_retry_r=ifxhc->nak_retry=0;
++	ifxhc->nak_countdown_r=ifxhc->nak_countdown=0;
++
++	if (ifxhc->split)
++	{
++		if(ifxhc->is_in)
++		{
++		}
++		else
++		{
++		}
++	}
++	else if(_epqh->ep_type==IFXUSB_EP_TYPE_CTRL)
++	{
++		if(ifxhc->is_in)
++		{
++		}
++		else
++		{
++		}
++	}
++	else if(_epqh->ep_type==IFXUSB_EP_TYPE_BULK)
++	{
++		if(ifxhc->is_in)
++		{
++//			ifxhc->nak_retry_r=ifxhc->nak_retry=nak_retry_max;
++//			ifxhc->nak_countdown_r=ifxhc->nak_countdown=nak_countdown_max;
++		}
++		else
++		{
++		}
++	}
++	else if(_epqh->ep_type==IFXUSB_EP_TYPE_INTR)
++	{
++		if(ifxhc->is_in)
++		{
++		}
++		else
++		{
++		}
++	}
++	else if(_epqh->ep_type==IFXUSB_EP_TYPE_ISOC)
++	{
++		if(ifxhc->is_in)
++		{
++		}
++		else
++		{
++		}
++	}
++
++	return 1;
++}
++
++/*!
++ \brief This function selects transactions from the HCD transfer schedule and
++  assigns them to available host channels. It is called from HCD interrupt
++  handler functions.
++ */
++static void select_eps_sub(ifxhcd_hcd_t *_ifxhcd)
++{
++	struct list_head *epqh_ptr;
++	struct list_head *urbd_ptr;
++	ifxhcd_epqh_t    *epqh;
++	ifxhcd_urbd_t    *urbd;
++	int               ret_val=0;
++
++	/*== AVM/BC 20101111 Function called with Lock ==*/
++
++//	#ifdef __DEBUG__
++//		IFX_DEBUGPL(DBG_HCD, "  ifxhcd_select_ep\n");
++//	#endif
++
++	/* Process entries in the periodic ready list. */
++	#ifdef __EN_ISOC__
++		epqh_ptr       = _ifxhcd->epqh_isoc_ready.next;
++		while (epqh_ptr != &_ifxhcd->epqh_isoc_ready && !list_empty(&_ifxhcd->free_hc_list))
++		{
++			epqh = list_entry(epqh_ptr, ifxhcd_epqh_t, epqh_list_entry);
++			epqh_ptr = epqh_ptr->next;
++			if(epqh->period_do)
++			{
++				if(assign_and_init_hc(_ifxhcd, epqh))
++				{
++					IFX_DEBUGPL(DBG_HCD, "  select_eps ISOC\n");
++					list_move_tail(&epqh->epqh_list_entry, &_ifxhcd->epqh_isoc_active);
++					epqh->is_active=1;
++					ret_val=1;
++					epqh->period_do=0;
++				}
++			}
++		}
++	#endif
++
++	epqh_ptr       = _ifxhcd->epqh_intr_ready.next;
++	while (epqh_ptr != &_ifxhcd->epqh_intr_ready && !list_empty(&_ifxhcd->free_hc_list))
++	{
++		epqh = list_entry(epqh_ptr, ifxhcd_epqh_t, epqh_list_entry);
++		epqh_ptr = epqh_ptr->next;
++		if(epqh->period_do)
++		{
++			if(assign_and_init_hc(_ifxhcd, epqh))
++			{
++				IFX_DEBUGPL(DBG_HCD, "  select_eps INTR\n");
++				list_move_tail(&epqh->epqh_list_entry, &_ifxhcd->epqh_intr_active);
++				epqh->is_active=1;
++				ret_val=1;
++				epqh->period_do=0;
++			}
++		}
++	}
++
++	epqh_ptr       = _ifxhcd->epqh_np_ready.next;
++	while (epqh_ptr != &_ifxhcd->epqh_np_ready && !list_empty(&_ifxhcd->free_hc_list))  // may need to preserve at lease one for period
++	{
++		epqh = list_entry(epqh_ptr, ifxhcd_epqh_t, epqh_list_entry);
++		epqh_ptr = epqh_ptr->next;
++		if(assign_and_init_hc(_ifxhcd, epqh))
++		{
++			IFX_DEBUGPL(DBG_HCD, "  select_eps CTRL/BULK\n");
++			list_move_tail(&epqh->epqh_list_entry, &_ifxhcd->epqh_np_active);
++			epqh->is_active=1;
++			ret_val=1;
++		}
++	}
++	if(ret_val)
++		/*== AVM/BC 20101111 Function called with Lock ==*/
++		process_channels_sub(_ifxhcd);
++
++	/* AVM/BC 20101111 Urbds completion loop */
++	while (!list_empty(&_ifxhcd->urbd_complete_list))
++	{
++		urbd_ptr = _ifxhcd->urbd_complete_list.next;
++		list_del_init(urbd_ptr);
++
++		urbd = list_entry(urbd_ptr, ifxhcd_urbd_t, urbd_list_entry);
++
++		ifxhcd_complete_urb(_ifxhcd, urbd, urbd->status);
++
++	}
++
++}
++
++static void select_eps_func(unsigned long data)
++{
++	unsigned long flags;
++
++	ifxhcd_hcd_t *ifxhcd;
++	ifxhcd=((ifxhcd_hcd_t *)data);
++
++	/* AVM/BC 20101111 select_eps_in_use flag removed */
++
++	SPIN_LOCK_IRQSAVE(&ifxhcd->lock, flags);
++
++	/*if(ifxhcd->select_eps_in_use){
++		SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags);
++		return;
++	}
++	ifxhcd->select_eps_in_use=1;
++	*/
++
++	select_eps_sub(ifxhcd);
++
++	//ifxhcd->select_eps_in_use=0;
++
++	SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags);
++}
++
++void select_eps(ifxhcd_hcd_t *_ifxhcd)
++{
++	if(in_irq())
++	{
++		if(!_ifxhcd->select_eps.func)
++		{
++			_ifxhcd->select_eps.next = NULL;
++			_ifxhcd->select_eps.state = 0;
++			atomic_set( &_ifxhcd->select_eps.count, 0);
++			_ifxhcd->select_eps.func = select_eps_func;
++			_ifxhcd->select_eps.data = (unsigned long)_ifxhcd;
++		}
++		tasklet_schedule(&_ifxhcd->select_eps);
++	}
++	else
++	{
++		unsigned long flags;
++
++		/* AVM/BC 20101111 select_eps_in_use flag removed */
++
++		SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
++
++		/*if(_ifxhcd->select_eps_in_use){
++			printk ("select_eps non_irq: busy\n");
++			SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
++			return;
++		}
++		_ifxhcd->select_eps_in_use=1;
++		*/
++
++		select_eps_sub(_ifxhcd);
++
++		//_ifxhcd->select_eps_in_use=0;
++
++		SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
++	}
++}
++
++/*!
++ \brief
++ */
++static void process_unaligned( ifxhcd_epqh_t *_epqh)
++{
++	#if   defined(__UNALIGNED_BUFFER_ADJ__)
++		if(!_epqh->aligned_checked)
++		{
++			uint32_t xfer_len;
++			xfer_len=_epqh->urbd->xfer_len;
++			if(_epqh->urbd->is_in && xfer_len<_epqh->mps)
++				xfer_len = _epqh->mps;
++			_epqh->using_aligned_buf=0;
++
++			if(xfer_len > 0 && ((unsigned long)_epqh->urbd->xfer_buff) & 3)
++			{
++				if(   _epqh->aligned_buf
++				   && _epqh->aligned_buf_len > 0
++				   && _epqh->aligned_buf_len < xfer_len
++				  )
++				{
++					ifxusb_free_buf(_epqh->aligned_buf);
++					_epqh->aligned_buf=NULL;
++					_epqh->aligned_buf_len=0;
++				}
++				if(! _epqh->aligned_buf || ! _epqh->aligned_buf_len)
++				{
++					_epqh->aligned_buf = ifxusb_alloc_buf(xfer_len, _epqh->urbd->is_in);
++					if(_epqh->aligned_buf)
++						_epqh->aligned_buf_len = xfer_len;
++				}
++				if(_epqh->aligned_buf)
++				{
++					if(!_epqh->urbd->is_in)
++						memcpy(_epqh->aligned_buf, _epqh->urbd->xfer_buff, xfer_len);
++					_epqh->using_aligned_buf=1;
++					_epqh->hc->xfer_buff = _epqh->aligned_buf;
++				}
++				else
++					IFX_WARN("%s():%d\n",__func__,__LINE__);
++			}
++			if(_epqh->ep_type==IFXUSB_EP_TYPE_CTRL)
++			{
++				_epqh->using_aligned_setup=0;
++				if(((unsigned long)_epqh->urbd->setup_buff) & 3)
++				{
++					if(! _epqh->aligned_setup)
++						_epqh->aligned_setup = ifxusb_alloc_buf(8,0);
++					if(_epqh->aligned_setup)
++					{
++						memcpy(_epqh->aligned_setup, _epqh->urbd->setup_buff, 8);
++						_epqh->using_aligned_setup=1;
++					}
++					else
++						IFX_WARN("%s():%d\n",__func__,__LINE__);
++					_epqh->hc->xfer_buff = _epqh->aligned_setup;
++				}
++			}
++		}
++	#elif defined(__UNALIGNED_BUFFER_CHK__)
++		if(!_epqh->aligned_checked)
++		{
++			if(_epqh->urbd->is_in)
++			{
++				if(_epqh->urbd->xfer_len==0)
++					IFX_WARN("%s():%d IN xfer while length is zero \n",__func__,__LINE__);
++				else{
++					if(_epqh->urbd->xfer_len < _epqh->mps)
++						IFX_WARN("%s():%d IN xfer while length < mps \n",__func__,__LINE__);
++
++					if(((unsigned long)_epqh->urbd->xfer_buff) & 3)
++						IFX_WARN("%s():%d IN xfer Buffer UNALIGNED\n",__func__,__LINE__);
++				}
++			}
++			else
++			{
++				if(_epqh->urbd->xfer_len > 0 && (((unsigned long)_epqh->urbd->xfer_buff) & 3) )
++					IFX_WARN("%s():%d OUT xfer Buffer UNALIGNED\n",__func__,__LINE__);
++			}
++
++			if(_epqh->ep_type==IFXUSB_EP_TYPE_CTRL)
++			{
++				if(((unsigned long)_epqh->urbd->setup_buff) & 3)
++					IFX_WARN("%s():%d SETUP xfer Buffer UNALIGNED\n",__func__,__LINE__);
++			}
++		}
++	#endif
++	_epqh->aligned_checked=1;
++}
++
++
++/*!
++ \brief
++ */
++void process_channels_sub(ifxhcd_hcd_t *_ifxhcd)
++{
++	ifxhcd_epqh_t	 *epqh;
++	struct list_head *epqh_item;
++	struct ifxhcd_hc *hc;
++
++	#ifdef __EN_ISOC__
++		if (!list_empty(&_ifxhcd->epqh_isoc_active))
++		{
++			for (epqh_item  =  _ifxhcd->epqh_isoc_active.next;
++			     epqh_item != &_ifxhcd->epqh_isoc_active;
++			     )
++			{
++				epqh = list_entry(epqh_item, ifxhcd_epqh_t, epqh_list_entry);
++				epqh_item  =  epqh_item->next;
++				hc=epqh->hc;
++				if(hc && !hc->xfer_started && epqh->period_do)
++				{
++					if(hc->split==0
++					    || hc->split==1
++					   )
++					{
++						//epqh->ping_state = 0;
++						process_unaligned(epqh);
++						hc->wait_for_sof=epqh->wait_for_sof;
++						epqh->wait_for_sof=0;
++						ifxhcd_hc_start(&_ifxhcd->core_if, hc);
++						epqh->period_do=0;
++						{
++							gint_data_t gintsts = {.d32 = 0};
++							gintsts.b.sofintr = 1;
++							ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk,0, gintsts.d32);
++						}
++					}
++				}
++			}
++		}
++	#endif
++
++	if (!list_empty(&_ifxhcd->epqh_intr_active))
++	{
++		for (epqh_item  =  _ifxhcd->epqh_intr_active.next;
++		     epqh_item != &_ifxhcd->epqh_intr_active;
++		     )
++		{
++			epqh = list_entry(epqh_item, ifxhcd_epqh_t, epqh_list_entry);
++			epqh_item  =  epqh_item->next;
++			hc=epqh->hc;
++			if(hc && !hc->xfer_started && epqh->period_do)
++			{
++				if(hc->split==0
++				    || hc->split==1
++				   )
++				{
++					//epqh->ping_state = 0;
++					process_unaligned(epqh);
++					hc->wait_for_sof=epqh->wait_for_sof;
++					epqh->wait_for_sof=0;
++					ifxhcd_hc_start(&_ifxhcd->core_if, hc);
++					epqh->period_do=0;
++#ifdef __USE_TIMER_4_SOF__
++					/* AVM/WK change: let hc_start decide, if irq is needed */
++#else
++					{
++						gint_data_t gintsts = {.d32 = 0};
++						gintsts.b.sofintr = 1;
++						ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk,0, gintsts.d32);
++					}
++#endif
++				}
++			}
++
++		}
++	}
++
++	if (!list_empty(&_ifxhcd->epqh_np_active))
++	{
++		for (epqh_item  =  _ifxhcd->epqh_np_active.next;
++		     epqh_item != &_ifxhcd->epqh_np_active;
++		     )
++		{
++			epqh = list_entry(epqh_item, ifxhcd_epqh_t, epqh_list_entry);
++			epqh_item  =  epqh_item->next;
++			hc=epqh->hc;
++			if(hc)
++			{
++				if(!hc->xfer_started)
++				{
++					if(hc->split==0
++					    || hc->split==1
++					  //|| hc->split_counter == 0
++					   )
++					{
++						//epqh->ping_state = 0;
++						process_unaligned(epqh);
++						hc->wait_for_sof=epqh->wait_for_sof;
++						epqh->wait_for_sof=0;
++						ifxhcd_hc_start(&_ifxhcd->core_if, hc);
++					}
++				}
++			}
++		}
++	}
++}
++
++void process_channels(ifxhcd_hcd_t *_ifxhcd)
++{
++	unsigned long flags;
++
++	/* AVM/WK Fix: use spin_lock instead busy flag
++	**/
++	SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
++
++	//if(_ifxhcd->process_channels_in_use)
++	//	return;
++	//_ifxhcd->process_channels_in_use=1;
++
++	process_channels_sub(_ifxhcd);
++	//_ifxhcd->process_channels_in_use=0;
++	SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
++}
++
++
++#ifdef __HC_XFER_TIMEOUT__
++	static void hc_xfer_timeout(unsigned long _ptr)
++	{
++		hc_xfer_info_t *xfer_info = (hc_xfer_info_t *)_ptr;
++		int hc_num = xfer_info->hc->hc_num;
++		IFX_WARN("%s: timeout on channel %d\n", __func__, hc_num);
++		IFX_WARN("  start_hcchar_val 0x%08x\n", xfer_info->hc->start_hcchar_val);
++	}
++#endif
++
++void ifxhcd_hc_dumb_rx(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc,uint8_t   *dump_buf)
++{
++	ifxusb_hc_regs_t *hc_regs = _core_if->hc_regs[_ifxhc->hc_num];
++	hctsiz_data_t hctsiz= { .d32=0 };
++	hcchar_data_t hcchar;
++
++
++	_ifxhc->xfer_len = _ifxhc->mps;
++	hctsiz.b.xfersize = _ifxhc->mps;
++	hctsiz.b.pktcnt   = 0;
++	hctsiz.b.pid      = _ifxhc->data_pid_start;
++	ifxusb_wreg(&hc_regs->hctsiz, hctsiz.d32);
++
++	ifxusb_wreg(&hc_regs->hcdma, (uint32_t)(CPHYSADDR( ((uint32_t)(dump_buf)))));
++
++	{
++		hcint_data_t hcint= { .d32=0 };
++//		hcint.b.nak =1;
++//		hcint.b.nyet=1;
++//		hcint.b.ack =1;
++		hcint.d32 =0xFFFFFFFF;
++		ifxusb_wreg(&hc_regs->hcint, hcint.d32);
++	}
++
++	/* Set host channel enable after all other setup is complete. */
++	hcchar.b.chen  = 1;
++	hcchar.b.chdis = 0;
++	hcchar.b.epdir = 1;
++	IFX_DEBUGPL(DBG_HCDV, "  HCCHART: 0x%08x\n", hcchar.d32);
++	ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
++}
++
++/*!
++   \brief This function trigger a data transfer for a host channel and
++  starts the transfer.
++
++  For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
++  register along with a packet count of 1 and the channel is enabled. This
++  causes a single PING transaction to occur. Other fields in HCTSIZ are
++  simply set to 0 since no data transfer occurs in this case.
++
++  For a PING transfer in DMA mode, the HCTSIZ register is initialized with
++  all the information required to perform the subsequent data transfer. In
++  addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
++  controller performs the entire PING protocol, then starts the data
++  transfer.
++  \param _core_if        Pointer of core_if structure
++  \param _ifxhc Information needed to initialize the host channel. The xfer_len
++  value may be reduced to accommodate the max widths of the XferSize and
++  PktCnt fields in the HCTSIZn register. The multi_count value may be changed
++  to reflect the final xfer_len value.
++ */
++void ifxhcd_hc_start(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc)
++{
++	hctsiz_data_t hctsiz= { .d32=0 };
++	hcchar_data_t hcchar;
++	uint32_t max_hc_xfer_size = _core_if->params.max_transfer_size;
++	uint16_t max_hc_pkt_count = _core_if->params.max_packet_count;
++	ifxusb_hc_regs_t *hc_regs = _core_if->hc_regs[_ifxhc->hc_num];
++	hfnum_data_t hfnum;
++
++	hctsiz.b.dopng = 0;
++//	if(_ifxhc->do_ping && !_ifxhc->is_in) hctsiz.b.dopng = 1;
++
++	_ifxhc->nak_countdown=_ifxhc->nak_countdown_r;
++
++	/* AVM/BC 20101111 Workaround: Always PING if HI-Speed Out and xfer_len > 0 */
++	if(/*_ifxhc->do_ping &&*/
++		(!_ifxhc->is_in) &&
++		(_ifxhc->speed == IFXUSB_EP_SPEED_HIGH) &&
++		((_ifxhc->ep_type == IFXUSB_EP_TYPE_BULK) || ((_ifxhc->ep_type == IFXUSB_EP_TYPE_CTRL) && (_ifxhc->control_phase != IFXHCD_CONTROL_SETUP))) &&
++		_ifxhc->xfer_len
++		)
++		hctsiz.b.dopng = 1;
++
++	_ifxhc->xfer_started = 1;
++
++	if(_ifxhc->epqh->pkt_count_limit > 0 && _ifxhc->epqh->pkt_count_limit < max_hc_pkt_count )
++	{
++		max_hc_pkt_count=_ifxhc->epqh->pkt_count_limit;
++		if(max_hc_pkt_count * _ifxhc->mps <  max_hc_xfer_size)
++			max_hc_xfer_size = max_hc_pkt_count * _ifxhc->mps;
++	}
++	if (_ifxhc->split > 0)
++	{
++		{
++			gint_data_t gintsts = {.d32 = 0};
++			gintsts.b.sofintr = 1;
++			ifxusb_mreg(&_core_if->core_global_regs->gintmsk,0, gintsts.d32);
++		}
++
++		_ifxhc->start_pkt_count = 1;
++		if(!_ifxhc->is_in && _ifxhc->split>1) // OUT CSPLIT
++			_ifxhc->xfer_len = 0;
++		if (_ifxhc->xfer_len > _ifxhc->mps)
++			_ifxhc->xfer_len = _ifxhc->mps;
++		if (_ifxhc->xfer_len > 188)
++			_ifxhc->xfer_len = 188;
++	}
++	else if(_ifxhc->is_in)
++	{
++		_ifxhc->short_rw = 0;
++		if (_ifxhc->xfer_len > 0)
++		{
++			if (_ifxhc->xfer_len > max_hc_xfer_size)
++				_ifxhc->xfer_len = max_hc_xfer_size - _ifxhc->mps + 1;
++			_ifxhc->start_pkt_count = (_ifxhc->xfer_len + _ifxhc->mps - 1) / _ifxhc->mps;
++			if (_ifxhc->start_pkt_count > max_hc_pkt_count)
++				_ifxhc->start_pkt_count = max_hc_pkt_count;
++		}
++		else /* Need 1 packet for transfer length of 0. */
++			_ifxhc->start_pkt_count = 1;
++		_ifxhc->xfer_len = _ifxhc->start_pkt_count * _ifxhc->mps;
++	}
++	else //non-split out
++	{
++		if (_ifxhc->xfer_len == 0)
++		{
++			/*== AVM/BC WK 20110421 ZERO PACKET Workaround: Is not an error ==*/
++			//if(_ifxhc->short_rw==0)
++			//	printk(KERN_INFO "%s() line %d: ZLP write without short_rw set!\n",__func__,__LINE__);
++			_ifxhc->start_pkt_count = 1;
++		}
++		else
++		{
++			if (_ifxhc->xfer_len > max_hc_xfer_size)
++			{
++				_ifxhc->start_pkt_count = (max_hc_xfer_size / _ifxhc->mps);
++				_ifxhc->xfer_len = _ifxhc->start_pkt_count * _ifxhc->mps;
++			}
++			else
++			{
++				_ifxhc->start_pkt_count = (_ifxhc->xfer_len+_ifxhc->mps-1)  / _ifxhc->mps;
++//				if(_ifxhc->start_pkt_count * _ifxhc->mps == _ifxhc->xfer_len )
++//					_ifxhc->start_pkt_count += _ifxhc->short_rw;
++				/*== AVM/BC WK 20110421 ZERO PACKET Workaround / check if short_rw is needed ==*/
++				if(_ifxhc->start_pkt_count * _ifxhc->mps != _ifxhc->xfer_len )
++					_ifxhc->short_rw = 0;
++			}
++		}
++	}
++
++	#ifdef __EN_ISOC__
++		if (_ifxhc->ep_type == IFXUSB_EP_TYPE_ISOC)
++		{
++			/* Set up the initial PID for the transfer. */
++			#if 1
++				_ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
++			#else
++				if (_ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
++				{
++					if (_ifxhc->is_in)
++					{
++						if      (_ifxhc->multi_count == 1)
++							_ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
++						else if (_ifxhc->multi_count == 2)
++							_ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
++						else
++							_ifxhc->data_pid_start = IFXUSB_HC_PID_DATA2;
++					}
++					else
++					{
++						if (_ifxhc->multi_count == 1)
++							_ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
++						else
++							_ifxhc->data_pid_start = IFXUSB_HC_PID_MDATA;
++					}
++				}
++				else
++					_ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
++			#endif
++		}
++	#endif
++
++	hctsiz.b.xfersize = _ifxhc->xfer_len;
++	hctsiz.b.pktcnt   = _ifxhc->start_pkt_count;
++	hctsiz.b.pid      = _ifxhc->data_pid_start;
++
++	ifxusb_wreg(&hc_regs->hctsiz, hctsiz.d32);
++
++
++	IFX_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _ifxhc->hc_num);
++	IFX_DEBUGPL(DBG_HCDV, "  Xfer Size: %d\n", hctsiz.b.xfersize);
++	IFX_DEBUGPL(DBG_HCDV, "  Num Pkts: %d\n" , hctsiz.b.pktcnt);
++	IFX_DEBUGPL(DBG_HCDV, "  Start PID: %d\n", hctsiz.b.pid);
++	IFX_DEBUGPL(DBG_HCDV, "  DMA: 0x%08x\n", (uint32_t)(CPHYSADDR( ((uint32_t)(_ifxhc->xfer_buff))+ _ifxhc->xfer_count )));
++	ifxusb_wreg(&hc_regs->hcdma, (uint32_t)(CPHYSADDR( ((uint32_t)(_ifxhc->xfer_buff))+ _ifxhc->xfer_count )));
++
++	/* Start the split */
++	if (_ifxhc->split>0)
++	{
++		hcsplt_data_t hcsplt;
++		hcsplt.d32 = ifxusb_rreg (&hc_regs->hcsplt);
++		hcsplt.b.spltena = 1;
++		if (_ifxhc->split>1)
++			hcsplt.b.compsplt = 1;
++		else
++			hcsplt.b.compsplt = 0;
++
++		#ifdef __EN_ISOC__
++			if (_ifxhc->ep_type == IFXUSB_EP_TYPE_ISOC)
++				hcsplt.b.xactpos = _ifxhc->isoc_xact_pos;
++			else
++		#endif
++		hcsplt.b.xactpos = IFXUSB_HCSPLIT_XACTPOS_ALL;// if not ISO
++		ifxusb_wreg(&hc_regs->hcsplt, hcsplt.d32);
++		IFX_DEBUGPL(DBG_HCDV, "  SPLIT: XACT_POS:0x%08x\n", hcsplt.d32);
++	}
++
++	hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++//	hcchar.b.multicnt = _ifxhc->multi_count;
++	hcchar.b.multicnt = 1;
++
++	#ifdef __DEBUG__
++		_ifxhc->start_hcchar_val = hcchar.d32;
++		if (hcchar.b.chdis)
++			IFX_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
++				 __func__, _ifxhc->hc_num, hcchar.d32);
++	#endif
++
++	/* Set host channel enable after all other setup is complete. */
++	hcchar.b.chen  = 1;
++	hcchar.b.chdis = 0;
++	hcchar.b.epdir =  _ifxhc->is_in;
++	_ifxhc->hcchar=hcchar.d32;
++
++	IFX_DEBUGPL(DBG_HCDV, "  HCCHART: 0x%08x\n", _ifxhc->hcchar);
++
++	/* == 20110901 AVM/WK Fix: Clear IRQ flags in any case ==*/
++	{
++		hcint_data_t hcint= { .d32=0 };
++		hcint.d32 =0xFFFFFFFF;
++		ifxusb_wreg(&hc_regs->hcint, hcint.d32);
++	}
++
++	if(_ifxhc->wait_for_sof==0)
++	{
++		hcint_data_t hcint;
++
++		hcint.d32=ifxusb_rreg(&hc_regs->hcintmsk);
++
++		hcint.b.nak =0;
++		hcint.b.ack =0;
++		/* == 20110901 AVM/WK Fix: We don't need NOT YET IRQ ==*/
++		hcint.b.nyet=0;
++		if(_ifxhc->nak_countdown_r)
++			hcint.b.nak =1;
++		ifxusb_wreg(&hc_regs->hcintmsk, hcint.d32);
++
++		/* AVM WK / BC 20100827
++		 * MOVED. Oddframe updated inmediatly before write HCChar Register.
++		 */
++		if (_ifxhc->ep_type == IFXUSB_EP_TYPE_INTR || _ifxhc->ep_type == IFXUSB_EP_TYPE_ISOC)
++		{
++			hfnum.d32 = ifxusb_rreg(&_core_if->host_global_regs->hfnum);
++			/* 1 if _next_ frame is odd, 0 if it's even */
++			hcchar.b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1;
++			_ifxhc->hcchar=hcchar.d32;
++		}
++
++		ifxusb_wreg(&hc_regs->hcchar, _ifxhc->hcchar);
++#ifdef __USE_TIMER_4_SOF__
++	} else {
++		//activate SOF IRQ
++		gint_data_t gintsts = {.d32 = 0};
++		gintsts.b.sofintr = 1;
++		ifxusb_mreg(&_core_if->core_global_regs->gintmsk,0, gintsts.d32);
++#endif
++	}
++
++	#ifdef __HC_XFER_TIMEOUT__
++		/* Start a timer for this transfer. */
++		init_timer(&_ifxhc->hc_xfer_timer);
++		_ifxhc->hc_xfer_timer.function = hc_xfer_timeout;
++		_ifxhc->hc_xfer_timer.core_if = _core_if;
++		_ifxhc->hc_xfer_timer.hc = _ifxhc;
++		_ifxhc->hc_xfer_timer.data = (unsigned long)(&_ifxhc->hc_xfer_info);
++		_ifxhc->hc_xfer_timer.expires = jiffies + (HZ*10);
++		add_timer(&_ifxhc->hc_xfer_timer);
++	#endif
++}
++
++/*!
++   \brief Attempts to halt a host channel. This function should only be called
++  to abort a transfer in DMA mode. Under normal circumstances in DMA mode, the
++  controller halts the channel when the transfer is complete or a condition
++  occurs that requires application intervention.
++
++  In DMA mode, always sets the Channel Enable and Channel Disable bits of the
++  HCCHARn register. The controller ensures there is space in the request
++  queue before submitting the halt request.
++
++  Some time may elapse before the core flushes any posted requests for this
++  host channel and halts. The Channel Halted interrupt handler completes the
++  deactivation of the host channel.
++ */
++void ifxhcd_hc_halt(ifxusb_core_if_t *_core_if,
++                    ifxhcd_hc_t *_ifxhc,
++                    ifxhcd_halt_status_e _halt_status)
++{
++	hcchar_data_t   hcchar;
++	ifxusb_hc_regs_t           *hc_regs;
++
++	hc_regs          = _core_if->hc_regs[_ifxhc->hc_num];
++
++	WARN_ON(_halt_status == HC_XFER_NO_HALT_STATUS);
++
++	if (_halt_status == HC_XFER_URB_DEQUEUE ||
++	    _halt_status == HC_XFER_AHB_ERR)
++	{
++		/*
++		 * Disable all channel interrupts except Ch Halted. The URBD
++		 * and EPQH state associated with this transfer has been cleared
++		 * (in the case of URB_DEQUEUE), so the channel needs to be
++		 * shut down carefully to prevent crashes.
++		 */
++		hcint_data_t hcintmsk;
++		hcintmsk.d32 = 0;
++		hcintmsk.b.chhltd = 1;
++		ifxusb_wreg(&hc_regs->hcintmsk, hcintmsk.d32);
++
++		/*
++		 * Make sure no other interrupts besides halt are currently
++		 * pending. Handling another interrupt could cause a crash due
++		 * to the URBD and EPQH state.
++		 */
++		ifxusb_wreg(&hc_regs->hcint, ~hcintmsk.d32);
++
++		/*
++		 * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
++		 * even if the channel was already halted for some other
++		 * reason.
++		 */
++		_ifxhc->halt_status = _halt_status;
++
++		hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++		if (hcchar.b.chen == 0)
++		{
++			/*
++			 * The channel is either already halted or it hasn't
++			 * started yet. In DMA mode, the transfer may halt if
++			 * it finishes normally or a condition occurs that
++			 * requires driver intervention. Don't want to halt
++			 * the channel again. In either Slave or DMA mode,
++			 * it's possible that the transfer has been assigned
++			 * to a channel, but not started yet when an URB is
++			 * dequeued. Don't want to halt a channel that hasn't
++			 * started yet.
++			 */
++			return;
++		}
++	}
++
++	if (_ifxhc->halting)
++	{
++		/*
++		 * A halt has already been issued for this channel. This might
++		 * happen when a transfer is aborted by a higher level in
++		 * the stack.
++		 */
++		#ifdef __DEBUG__
++			IFX_PRINT("*** %s: Channel %d, _hc->halting already set ***\n",
++				  __func__, _ifxhc->hc_num);
++		#endif
++		//ifxusb_dump_global_registers(_core_if); */
++		//ifxusb_dump_host_registers(_core_if); */
++		return;
++	}
++	hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++	/* == AVM/WK 20100709 halt channel only if enabled ==*/
++	if (hcchar.b.chen) {
++		_ifxhc->halting = 1;
++		hcchar.b.chdis = 1;
++
++		ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
++		_ifxhc->halt_status = _halt_status;
++	}
++
++	IFX_DEBUGPL(DBG_HCDV, "%s: Channel %d\n" , __func__, _ifxhc->hc_num);
++	IFX_DEBUGPL(DBG_HCDV, "  hcchar: 0x%08x\n"   , hcchar.d32);
++	IFX_DEBUGPL(DBG_HCDV, "  halting: %d\n" , _ifxhc->halting);
++	IFX_DEBUGPL(DBG_HCDV, "  halt_status: %d\n"  , _ifxhc->halt_status);
++
++	return;
++}
++
++/*!
++   \brief Clears a host channel.
++ */
++void ifxhcd_hc_cleanup(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc)
++{
++	ifxusb_hc_regs_t *hc_regs;
++
++	_ifxhc->xfer_started = 0;
++	/*
++	 * Clear channel interrupt enables and any unhandled channel interrupt
++	 * conditions.
++	 */
++	hc_regs = _core_if->hc_regs[_ifxhc->hc_num];
++	ifxusb_wreg(&hc_regs->hcintmsk, 0);
++	ifxusb_wreg(&hc_regs->hcint, 0xFFFFFFFF);
++
++	#ifdef __HC_XFER_TIMEOUT__
++		del_timer(&_ifxhc->hc_xfer_timer);
++	#endif
++	#ifdef __DEBUG__
++		{
++			hcchar_data_t hcchar;
++			hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++			if (hcchar.b.chdis)
++				IFX_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n", __func__, _ifxhc->hc_num, hcchar.d32);
++		}
++	#endif
++}
++
++
++
++
++
++
++
++
++#ifdef __DEBUG__
++	static void dump_urb_info(struct urb *_urb, char* _fn_name)
++	{
++		IFX_PRINT("%s, urb %p\n"          , _fn_name, _urb);
++		IFX_PRINT("  Device address: %d\n", usb_pipedevice(_urb->pipe));
++		IFX_PRINT("  Endpoint: %d, %s\n"  , usb_pipeendpoint(_urb->pipe),
++		                                    (usb_pipein(_urb->pipe) ? "IN" : "OUT"));
++		IFX_PRINT("  Endpoint type: %s\n",
++		    ({	char *pipetype;
++		    	switch (usb_pipetype(_urb->pipe)) {
++		    		case PIPE_CONTROL:     pipetype = "CONTROL"; break;
++		    		case PIPE_BULK:        pipetype = "BULK"; break;
++		    		case PIPE_INTERRUPT:   pipetype = "INTERRUPT"; break;
++		    		case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break;
++		    		default:               pipetype = "UNKNOWN"; break;
++		    	};
++		    	pipetype;
++		    }));
++		IFX_PRINT("  Speed: %s\n",
++		    ({	char *speed;
++		    	switch (_urb->dev->speed) {
++		    		case USB_SPEED_HIGH: speed = "HIGH"; break;
++		    		case USB_SPEED_FULL: speed = "FULL"; break;
++		    		case USB_SPEED_LOW:  speed = "LOW"; break;
++		    		default:             speed = "UNKNOWN"; break;
++		    	};
++		    	speed;
++		    }));
++		IFX_PRINT("  Max packet size: %d\n",
++			  usb_maxpacket(_urb->dev, _urb->pipe, usb_pipeout(_urb->pipe)));
++		IFX_PRINT("  Data buffer length: %d\n", _urb->transfer_buffer_length);
++		IFX_PRINT("  Transfer buffer: %p, Transfer DMA: %p\n",
++			  _urb->transfer_buffer, (void *)_urb->transfer_dma);
++		IFX_PRINT("  Setup buffer: %p, Setup DMA: %p\n",
++			  _urb->setup_packet, (void *)_urb->setup_dma);
++		IFX_PRINT("  Interval: %d\n", _urb->interval);
++		if (usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS)
++		{
++			int i;
++			for (i = 0; i < _urb->number_of_packets;  i++)
++			{
++				IFX_PRINT("  ISO Desc %d:\n", i);
++				IFX_PRINT("    offset: %d, length %d\n",
++				    _urb->iso_frame_desc[i].offset,
++				    _urb->iso_frame_desc[i].length);
++			}
++		}
++	}
++
++	static void dump_channel_info(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh)
++	{
++		if (_epqh->hc != NULL)
++		{
++			ifxhcd_hc_t      *hc = _epqh->hc;
++			struct list_head *item;
++			ifxhcd_epqh_t      *epqh_item;
++
++			ifxusb_hc_regs_t *hc_regs;
++
++			hcchar_data_t  hcchar;
++			hcsplt_data_t  hcsplt;
++			hctsiz_data_t  hctsiz;
++			uint32_t       hcdma;
++
++			hc_regs = _ifxhcd->core_if.hc_regs[hc->hc_num];
++			hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++			hcsplt.d32 = ifxusb_rreg(&hc_regs->hcsplt);
++			hctsiz.d32 = ifxusb_rreg(&hc_regs->hctsiz);
++			hcdma      = ifxusb_rreg(&hc_regs->hcdma);
++
++			IFX_PRINT("  Assigned to channel %d:\n"       , hc->hc_num);
++			IFX_PRINT("    hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
++			IFX_PRINT("    hctsiz 0x%08x, hcdma 0x%08x\n" , hctsiz.d32, hcdma);
++			IFX_PRINT("    dev_addr: %d, ep_num: %d, is_in: %d\n",
++			   hc->dev_addr, hc->ep_num, hc->is_in);
++			IFX_PRINT("    ep_type: %d\n"        , hc->ep_type);
++			IFX_PRINT("    max_packet_size: %d\n", hc->mps);
++			IFX_PRINT("    data_pid_start: %d\n" , hc->data_pid_start);
++			IFX_PRINT("    xfer_started: %d\n"   , hc->xfer_started);
++			IFX_PRINT("    halt_status: %d\n"    , hc->halt_status);
++			IFX_PRINT("    xfer_buff: %p\n"      , hc->xfer_buff);
++			IFX_PRINT("    xfer_len: %d\n"       , hc->xfer_len);
++			IFX_PRINT("    epqh: %p\n"           , hc->epqh);
++			IFX_PRINT("  NP Active:\n");
++			list_for_each(item, &_ifxhcd->epqh_np_active)
++			{
++				epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
++				IFX_PRINT("    %p\n", epqh_item);
++			}
++			IFX_PRINT("  NP Ready:\n");
++			list_for_each(item, &_ifxhcd->epqh_np_ready)
++			{
++				epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
++				IFX_PRINT("    %p\n", epqh_item);
++			}
++			IFX_PRINT("  INTR Active:\n");
++			list_for_each(item, &_ifxhcd->epqh_intr_active)
++			{
++				epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
++				IFX_PRINT("    %p\n", epqh_item);
++			}
++			IFX_PRINT("  INTR Ready:\n");
++			list_for_each(item, &_ifxhcd->epqh_intr_ready)
++			{
++				epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
++				IFX_PRINT("    %p\n", epqh_item);
++			}
++			#ifdef __EN_ISOC__
++				IFX_PRINT("  ISOC Active:\n");
++				list_for_each(item, &_ifxhcd->epqh_isoc_active)
++				{
++					epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
++					IFX_PRINT("    %p\n", epqh_item);
++				}
++				IFX_PRINT("  ISOC Ready:\n");
++				list_for_each(item, &_ifxhcd->epqh_isoc_ready)
++				{
++					epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
++					IFX_PRINT("    %p\n", epqh_item);
++				}
++			#endif
++			IFX_PRINT("  Standby:\n");
++			list_for_each(item, &_ifxhcd->epqh_stdby)
++			{
++				epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
++				IFX_PRINT("    %p\n", epqh_item);
++			}
++		}
++	}
++#endif //__DEBUG__
++
++
++/*!
++   \brief This function writes a packet into the Tx FIFO associated with the Host
++  Channel. For a channel associated with a non-periodic EP, the non-periodic
++  Tx FIFO is written. For a channel associated with a periodic EP, the
++  periodic Tx FIFO is written. This function should only be called in Slave
++  mode.
++
++  Upon return the xfer_buff and xfer_count fields in _hc are incremented by
++  then number of bytes written to the Tx FIFO.
++ */
++
++#ifdef __ENABLE_DUMP__
++	void ifxhcd_dump_state(ifxhcd_hcd_t *_ifxhcd)
++	{
++		int num_channels;
++		int i;
++		num_channels = _ifxhcd->core_if.params.host_channels;
++		IFX_PRINT("\n");
++		IFX_PRINT("************************************************************\n");
++		IFX_PRINT("HCD State:\n");
++		IFX_PRINT("  Num channels: %d\n", num_channels);
++		for (i = 0; i < num_channels; i++) {
++			ifxhcd_hc_t *hc = &_ifxhcd->ifxhc[i];
++			IFX_PRINT("  Channel %d:\n", hc->hc_num);
++			IFX_PRINT("    dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
++				  hc->dev_addr, hc->ep_num, hc->is_in);
++			IFX_PRINT("    speed: %d\n"          , hc->speed);
++			IFX_PRINT("    ep_type: %d\n"        , hc->ep_type);
++			IFX_PRINT("    mps: %d\n", hc->mps);
++			IFX_PRINT("    data_pid_start: %d\n" , hc->data_pid_start);
++			IFX_PRINT("    xfer_started: %d\n"   , hc->xfer_started);
++			IFX_PRINT("    xfer_buff: %p\n"      , hc->xfer_buff);
++			IFX_PRINT("    xfer_len: %d\n"       , hc->xfer_len);
++			IFX_PRINT("    xfer_count: %d\n"     , hc->xfer_count);
++			IFX_PRINT("    halting: %d\n"   , hc->halting);
++			IFX_PRINT("    halt_status: %d\n"    , hc->halt_status);
++			IFX_PRINT("    split: %d\n"          , hc->split);
++			IFX_PRINT("    hub_addr: %d\n"       , hc->hub_addr);
++			IFX_PRINT("    port_addr: %d\n"      , hc->port_addr);
++			#ifdef __EN_ISOC__
++				IFX_PRINT("    isoc_xact_pos: %d\n"       , hc->isoc_xact_pos);
++			#endif
++			IFX_PRINT("    epqh: %p\n"           , hc->epqh);
++			IFX_PRINT("    short_rw: %d\n"       , hc->short_rw);
++			IFX_PRINT("    do_ping: %d\n"        , hc->do_ping);
++			IFX_PRINT("    control_phase: %d\n"  , hc->control_phase);
++			IFX_PRINT("    pkt_count_limit: %d\n", hc->epqh->pkt_count_limit);
++			IFX_PRINT("    start_pkt_count: %d\n"       , hc->start_pkt_count);
++		}
++		IFX_PRINT("************************************************************\n");
++		IFX_PRINT("\n");
++	}
++#endif //__ENABLE_DUMP__
++
+diff --git a/drivers/usb/ifxhcd/ifxhcd.h b/drivers/usb/ifxhcd/ifxhcd.h
+new file mode 100644
+index 0000000..3a40851
+--- /dev/null
++++ b/drivers/usb/ifxhcd/ifxhcd.h
+@@ -0,0 +1,628 @@
++/*****************************************************************************
++ **   FILE NAME       : ifxhcd.h
++ **   PROJECT         : IFX USB sub-system V3
++ **   MODULES         : IFX USB sub-system Host and Device driver
++ **   SRC VERSION     : 1.0
++ **   DATE            : 1/Jan/2009
++ **   AUTHOR          : Chen, Howard
++ **   DESCRIPTION     : This file contains the structures, constants, and interfaces for
++ **                     the Host Contoller Driver (HCD).
++ **
++ **                     The Host Controller Driver (HCD) is responsible for translating requests
++ **                     from the USB Driver into the appropriate actions on the IFXUSB controller.
++ **                     It isolates the USBD from the specifics of the controller by providing an
++ **                     API to the USBD.
++ **   FUNCTIONS       :
++ **   COMPILER        : gcc
++ **   REFERENCE       : Synopsys DWC-OTG Driver 2.7
++ **   COPYRIGHT       :
++ **  Version Control Section  **
++ **   $Author$
++ **   $Date$
++ **   $Revisions$
++ **   $Log$       Revision history
++*****************************************************************************/
++
++/*!
++  \defgroup IFXUSB_HCD HCD Interface
++  \ingroup IFXUSB_DRIVER_V3
++  \brief  The Host Controller Driver (HCD) is responsible for translating requests
++ from the USB Driver into the appropriate actions on the IFXUSB controller.
++ It isolates the USBD from the specifics of the controller by providing an
++ API to the USBD.
++ */
++
++
++/*!
++  \file ifxhcd.h
++  \ingroup IFXUSB_DRIVER_V3
++  \brief This file contains the structures, constants, and interfaces for
++ the Host Contoller Driver (HCD).
++ */
++
++#if !defined(__IFXHCD_H__)
++#define __IFXHCD_H__
++
++#include <linux/list.h>
++#include <linux/usb.h>
++
++#ifdef __USE_TIMER_4_SOF__
++#include <linux/hrtimer.h>
++#endif
++#include <linux/usb/hcd.h>
++
++#include "ifxusb_cif.h"
++#include "ifxusb_plat.h"
++
++
++
++/*!
++  \addtogroup IFXUSB_HCD
++ */
++/*@{*/
++
++/* Phases for control transfers.*/
++typedef enum ifxhcd_control_phase {
++	IFXHCD_CONTROL_SETUP,
++	IFXHCD_CONTROL_DATA,
++	IFXHCD_CONTROL_STATUS
++} ifxhcd_control_phase_e;
++
++/* Reasons for halting a host channel. */
++typedef enum ifxhcd_halt_status
++{
++	HC_XFER_NO_HALT_STATUS,         // Initial
++	HC_XFER_COMPLETE,               // Xact complete without error, upward
++	HC_XFER_URB_COMPLETE,           // Xfer complete without error, short upward
++	HC_XFER_STALL,                  // HC stopped abnormally, upward/downward
++	HC_XFER_XACT_ERR,               // HC stopped abnormally, upward
++	HC_XFER_FRAME_OVERRUN,          // HC stopped abnormally, upward
++	HC_XFER_BABBLE_ERR,             // HC stopped abnormally, upward
++	HC_XFER_AHB_ERR,                // HC stopped abnormally, upward
++	HC_XFER_DATA_TOGGLE_ERR,
++	HC_XFER_URB_DEQUEUE,            // HC stopper manually, downward
++	HC_XFER_NAK                     // HC stopped by nak monitor, downward
++} ifxhcd_halt_status_e;
++
++struct ifxhcd_urbd;
++struct ifxhcd_hc ;
++struct ifxhcd_epqh ;
++struct ifxhcd_hcd;
++
++/*!
++ \brief A URB Descriptor (URBD) holds the state of a bulk, control,
++  interrupt, or isochronous transfer. A single URBD is created for each URB
++  (of one of these types) submitted to the HCD. The transfer associated with
++  a URBD may require one or multiple transactions.
++
++  A URBD is linked to a EP Queue Head, which is entered in either the
++  isoc, intr or non-periodic schedule for execution. When a URBD is chosen for
++  execution, some or all of its transactions may be executed. After
++  execution, the state of the URBD is updated. The URBD may be retired if all
++  its transactions are complete or if an error occurred. Otherwise, it
++  remains in the schedule so more transactions can be executed later.
++ */
++typedef struct ifxhcd_urbd {
++	struct list_head          urbd_list_entry;  // Hook for EPQH->urbd_list and ifxhcd->urbd_complete_list
++	struct urb               *urb;              /*!< URB for this transfer */
++	                                            //struct urb {
++	                                            //  struct list_head urb_list;
++	                                            //  struct list_head anchor_list;
++	                                            //  struct usb_anchor * anchor;
++	                                            //  struct usb_device * dev;
++	                                            //  struct usb_host_endpoint * ep;
++	                                            //  unsigned int pipe;
++	                                            //  int status;
++	                                            //  unsigned int transfer_flags;
++	                                            //  void * transfer_buffer;
++	                                            //  dma_addr_t transfer_dma;
++	                                            //  u32 transfer_buffer_length;
++	                                            //  u32 actual_length;
++	                                            //  unsigned char * setup_packet;
++	                                            //  dma_addr_t setup_dma;
++	                                            //  int start_frame;
++	                                            //  int number_of_packets;
++	                                            //  int interval;
++	                                            //  int error_count;
++	                                            //  void * context;
++	                                            //  usb_complete_t complete;
++	                                            //  struct usb_iso_packet_descriptor iso_frame_desc[0];
++	                                            //};
++	                                            //urb_list         For use by current owner of the URB.
++	                                            //anchor_list      membership in the list of an anchor
++	                                            //anchor           to anchor URBs to a common mooring
++	                                            //dev              Identifies the USB device to perform the request.
++	                                            //ep               Points to the endpoint's data structure. Will
++	                                            //                 eventually replace pipe.
++	                                            //pipe             Holds endpoint number, direction, type, and more.
++	                                            //                 Create these values with the eight macros available; u
++	                                            //                 sb_{snd,rcv}TYPEpipe(dev,endpoint), where the TYPE is
++	                                            //                  "ctrl", "bulk", "int" or "iso". For example
++	                                            //                 usb_sndbulkpipe or usb_rcvintpipe. Endpoint numbers
++	                                            //                 range from zero to fifteen. Note that "in" endpoint two
++	                                            //                 is a different endpoint (and pipe) from "out" endpoint
++	                                            //                 two. The current configuration controls the existence,
++	                                            //                 type, and maximum packet size of any given endpoint.
++	                                            //status           This is read in non-iso completion functions to get
++	                                            //                 the status of the particular request. ISO requests
++	                                            //                 only use it to tell whether the URB was unlinked;
++	                                            //                 detailed status for each frame is in the fields of
++	                                            //                 the iso_frame-desc.
++	                                            //transfer_flags   A variety of flags may be used to affect how URB
++	                                            //                 submission, unlinking, or operation are handled.
++	                                            //                 Different kinds of URB can use different flags.
++	                                            //                      URB_SHORT_NOT_OK
++	                                            //                      URB_ISO_ASAP
++	                                            //                      URB_NO_TRANSFER_DMA_MAP
++	                                            //                      URB_NO_SETUP_DMA_MAP
++	                                            //                      URB_NO_FSBR
++	                                            //                      URB_ZERO_PACKET
++	                                            //                      URB_NO_INTERRUPT
++	                                            //transfer_buffer  This identifies the buffer to (or from) which the I/O
++	                                            //                 request will be performed (unless URB_NO_TRANSFER_DMA_MAP
++	                                            //                 is set). This buffer must be suitable for DMA; allocate it
++	                                            //                 with kmalloc or equivalent. For transfers to "in"
++	                                            //                 endpoints, contents of this buffer will be modified. This
++	                                            //                 buffer is used for the data stage of control transfers.
++	                                            //transfer_dma     When transfer_flags includes URB_NO_TRANSFER_DMA_MAP, the
++	                                            //                 device driver is saying that it provided this DMA address,
++	                                            //                 which the host controller driver should use in preference
++	                                            //                 to the transfer_buffer.
++	                                            //transfer_buffer_length How big is transfer_buffer. The transfer may be broken
++	                                            //                 up into chunks according to the current maximum packet size
++	                                            //                 for the endpoint, which is a function of the configuration
++	                                            //                 and is encoded in the pipe. When the length is zero, neither
++	                                            //                 transfer_buffer nor transfer_dma is used.
++	                                            //actual_length    This is read in non-iso completion functions, and it tells
++	                                            //                 how many bytes (out of transfer_buffer_length) were transferred.
++	                                            //                 It will normally be the same as requested, unless either an error
++	                                            //                 was reported or a short read was performed. The URB_SHORT_NOT_OK
++	                                            //                 transfer flag may be used to make such short reads be reported
++	                                            //                 as errors.
++	                                            //setup_packet     Only used for control transfers, this points to eight bytes of
++	                                            //                 setup data. Control transfers always start by sending this data
++	                                            //                 to the device. Then transfer_buffer is read or written, if needed.
++	                                            //setup_dma        For control transfers with URB_NO_SETUP_DMA_MAP set, the device
++	                                            //                 driver has provided this DMA address for the setup packet. The
++	                                            //                 host controller driver should use this in preference to setup_packet.
++	                                            //start_frame      Returns the initial frame for isochronous transfers.
++	                                            //number_of_packets Lists the number of ISO transfer buffers.
++	                                            //interval         Specifies the polling interval for interrupt or isochronous transfers.
++	                                            //                 The units are frames (milliseconds) for for full and low speed devices,
++	                                            //                 and microframes (1/8 millisecond) for highspeed ones.
++	                                            //error_count      Returns the number of ISO transfers that reported errors.
++	                                            //context          For use in completion functions. This normally points to request-specific
++	                                            //                 driver context.
++	                                            //complete         Completion handler. This URB is passed as the parameter to the completion
++	                                            //                 function. The completion function may then do what it likes with the URB,
++	                                            //                 including resubmitting or freeing it.
++	                                            //iso_frame_desc[0] Used to provide arrays of ISO transfer buffers and to collect the transfer
++	                                            //                 status for each buffer.
++
++	struct ifxhcd_epqh       *epqh;
++                                                // Actual data portion, not SETUP or STATUS in case of CTRL XFER
++                                                // DMA adjusted
++	uint8_t                  *setup_buff;       /*!< Pointer to the entire transfer buffer. (CPU accessable)*/
++	uint8_t                  *xfer_buff;        /*!< Pointer to the entire transfer buffer. (CPU accessable)*/
++	uint32_t                  xfer_len;         /*!< Total number of bytes to transfer in this xfer. */
++	unsigned                  is_in    :1;
++	unsigned                  is_active:1;
++
++	                          // For ALL XFER
++	uint8_t                   error_count;    /*!< Holds the number of bus errors that have occurred for a transaction
++	                                               within this transfer.
++	                                           */
++	/*== AVM/BC 20101111  Needed for URB Complete List ==*/
++	int 					  status;
++	                          // For ISOC XFER only
++	#ifdef __EN_ISOC__
++		int                       isoc_frame_index; /*!< Index of the next frame descriptor for an isochronous transfer. A
++		                                                 frame descriptor describes the buffer position and length of the
++		                                                 data to be transferred in the next scheduled (micro)frame of an
++		                                                 isochronous transfer. It also holds status for that transaction.
++		                                                 The frame index starts at 0.
++		                                             */
++		                          // For SPLITed ISOC XFER only
++		uint8_t                   isoc_split_pos;   /*!< Position of the ISOC split on full/low speed */
++		uint16_t                  isoc_split_offset;/*!< Position of the ISOC split in the buffer for the current frame */
++	#endif
++} ifxhcd_urbd_t;
++
++/*!
++ \brief A EP Queue Head (EPQH) holds the static characteristics of an endpoint and
++ maintains a list of transfers (URBDs) for that endpoint. A EPQH structure may
++ be entered in either the isoc, intr or non-periodic schedule.
++ */
++
++typedef struct ifxhcd_epqh {
++	struct list_head     epqh_list_entry;   // Hook for EP Queues
++	struct list_head     urbd_list;         /*!< List of URBDs for this EPQH. */
++	struct ifxhcd_hc    *hc;                /*!< Host channel currently processing transfers for this EPQH. */
++	struct ifxhcd_urbd  *urbd;              /*!< URBD currently assigned to a host channel for this EPQH. */
++	struct usb_host_endpoint *sysep;
++	uint8_t              ep_type;           /*!< Endpoint type. One of the following values:
++	                                             - IFXUSB_EP_TYPE_CTRL
++	                                             - IFXUSB_EP_TYPE_ISOC
++	                                             - IFXUSB_EP_TYPE_BULK
++	                                             - IFXUSB_EP_TYPE_INTR
++	                                         */
++	uint16_t             mps;               /*!< wMaxPacketSize Field of Endpoint Descriptor. */
++
++	/* == AVM/WK 20100710 Fix - Use toggle of usbcore ==*/
++	/*uint8_t              data_toggle;*/     /*!< Determines the PID of the next data packet
++	                                             One of the following values:
++	                                             - IFXHCD_HC_PID_DATA0
++	                                             - IFXHCD_HC_PID_DATA1
++	                                         */
++	uint8_t              is_active;
++
++	uint8_t              pkt_count_limit;
++	#ifdef __EPQD_DESTROY_TIMEOUT__
++		struct timer_list destroy_timer;
++	#endif
++
++	uint16_t             wait_for_sof;
++	uint8_t              need_split;        /*!< Full/low speed endpoint on high-speed hub requires split. */
++	uint16_t             interval;          /*!< Interval between transfers in (micro)frames. (for INTR)*/
++
++	uint16_t             period_counter;    /*!< Interval between transfers in (micro)frames. */
++	uint8_t              period_do;
++
++	uint8_t aligned_checked;
++
++	#if   defined(__UNALIGNED_BUFFER_ADJ__)
++		uint8_t using_aligned_setup;
++		uint8_t *aligned_setup;
++		uint8_t using_aligned_buf;
++		uint8_t *aligned_buf;
++		unsigned aligned_buf_len : 19;
++	#endif
++
++	uint8_t   *dump_buf;
++} ifxhcd_epqh_t;
++
++
++#if defined(__HC_XFER_TIMEOUT__)
++	struct ifxusb_core_if;
++	struct ifxhcd_hc;
++	typedef struct hc_xfer_info
++	{
++		struct ifxusb_core_if *core_if;
++		struct ifxhcd_hc      *hc;
++	} hc_xfer_info_t;
++#endif //defined(__HC_XFER_TIMEOUT__)
++
++
++/*!
++ \brief Host channel descriptor. This structure represents the state of a single
++ host channel when acting in host mode. It contains the data items needed to
++ transfer packets to an endpoint via a host channel.
++ */
++typedef struct ifxhcd_hc
++{
++	struct list_head hc_list_entry  ; // Hook to free hc
++	struct ifxhcd_epqh *epqh        ; /*!< EP Queue Head for the transfer being processed by this channel. */
++
++	uint8_t  hc_num                 ; /*!< Host channel number used for register address lookup */
++	uint8_t *xfer_buff              ; /*!< Pointer to the entire transfer buffer. */
++	uint32_t xfer_count             ; /*!< Number of bytes transferred so far. The offset of the begin of the buf */
++	uint32_t xfer_len               ; /*!< Total number of bytes to transfer in this xfer. */
++	uint16_t start_pkt_count        ; /*!< Packet count at start of transfer. Used to calculate the actual xfer size*/
++	ifxhcd_halt_status_e halt_status; /*!< Reason for halting the host channel. */
++
++	unsigned dev_addr       : 7; /*!< Device to access */
++	unsigned ep_num         : 4; /*!< EP to access */
++	unsigned is_in          : 1; /*!< EP direction. 0: OUT, 1: IN */
++	unsigned speed          : 2; /*!< EP speed. */
++	unsigned ep_type        : 2; /*!< Endpoint type. */
++	unsigned mps            :11; /*!< Max packet size in bytes */
++	unsigned data_pid_start : 2; /*!< PID for initial transaction. */
++	unsigned do_ping        : 1; /*!< Set to 1 to indicate that a PING request should be issued on this
++	                                  channel. If 0, process normally.
++	                              */
++
++	unsigned xfer_started   : 1; /*!< Flag to indicate whether the transfer has been started. Set to 1 if
++	                                  it has been started, 0 otherwise.
++	                              */
++	unsigned halting        : 1; /*!< Set to 1 if the host channel has been halted, but the core is not
++	                                  finished flushing queued requests. Otherwise 0.
++	                              */
++	unsigned short_rw       : 1; /*!< When Tx, means termination needed.
++	                                  When Rx, indicate Short Read  */
++	/* Split settings for the host channel */
++	unsigned split          : 2; /*!< Split: 0-Non Split, 1-SSPLIT, 2&3 CSPLIT */
++
++	/*== AVM/BC 20100701 - Workaround FullSpeed Interrupts with HiSpeed Hub ==*/
++	unsigned nyet_count;
++
++	/* nak monitor */
++	unsigned nak_retry_r    : 16;
++	unsigned nak_retry      : 16;
++		#define nak_retry_max     40000
++	unsigned nak_countdown  : 8;
++	unsigned nak_countdown_r: 8;
++		#define nak_countdown_max 1
++
++	uint16_t                  wait_for_sof;
++	ifxhcd_control_phase_e    control_phase;  /*!< Current phase for control transfers (Setup, Data, or Status). */
++	uint32_t ssplit_out_xfer_count; /*!< How many bytes transferred during SSPLIT OUT */
++	#ifdef __DEBUG__
++		uint32_t          start_hcchar_val;
++	#endif
++	#ifdef __HC_XFER_TIMEOUT__
++		hc_xfer_info_t    hc_xfer_info;
++		struct timer_list hc_xfer_timer;
++	#endif
++	uint32_t hcchar;
++
++	/* Split settings for the host channel */
++	uint8_t hub_addr;          /*!< Address of high speed hub */
++	uint8_t port_addr;         /*!< Port of the low/full speed device */
++	#ifdef __EN_ISOC__
++		uint8_t isoc_xact_pos;          /*!< Split transaction position */
++	#endif
++} ifxhcd_hc_t;
++
++
++/*!
++ \brief This structure holds the state of the HCD, including the non-periodic and
++ periodic schedules.
++ */
++typedef struct ifxhcd_hcd
++{
++	struct device *dev;
++	struct hc_driver hc_driver;
++	ifxusb_core_if_t core_if;   /*!< Pointer to the core interface structure. */
++	struct usb_hcd *syshcd;
++
++	volatile union ifxhcd_internal_flags
++	{
++		uint32_t d32;
++		struct
++		{
++			unsigned port_connect_status_change : 1;
++			unsigned port_connect_status        : 1;
++			unsigned port_reset_change          : 1;
++			unsigned port_enable_change         : 1;
++			unsigned port_suspend_change        : 1;
++			unsigned port_over_current_change   : 1;
++			unsigned reserved                   : 27;
++		} b;
++	} flags; /*!< Internal HCD Flags */
++
++	struct ifxhcd_hc ifxhc[MAX_EPS_CHANNELS];         /*!< Array of pointers to the host channel descriptors. Allows accessing
++	                                                       a host channel descriptor given the host channel number. This is
++	                                                       useful in interrupt handlers.
++	                                                   */
++	struct list_head free_hc_list;                    /*!< Free host channels in the controller. This is a list of ifxhcd_hc_t items. */
++	uint8_t   *status_buf;                            /*!< Buffer to use for any data received during the status phase of a
++	                                                       control transfer. Normally no data is transferred during the status
++	                                                       phase. This buffer is used as a bit bucket.
++	                                                   */
++		#define IFXHCD_STATUS_BUF_SIZE 64
++
++	struct list_head epqh_np_active;    // with URBD, with HC
++	struct list_head epqh_np_ready;     // with URBD, No HC
++
++	struct list_head epqh_intr_active;  // with URBD, with HC
++	struct list_head epqh_intr_ready;   // with URBD, no pass, No HC
++
++	#ifdef __EN_ISOC__
++		struct list_head epqh_isoc_active;  // with URBD, with HC
++		struct list_head epqh_isoc_ready;   // with URBD, no pass, No HC
++	#endif
++
++	/*== AVM/BC 20101111  URB Complete List ==*/
++	struct list_head urbd_complete_list;
++
++	struct list_head epqh_stdby;
++
++	/* AVM/BC 20101111 flags removed */
++	//unsigned process_channels_in_use  : 1;
++	//unsigned select_eps_in_use        : 1;
++
++	struct tasklet_struct  select_eps;                /*!<  Tasket to do a reset */
++	uint32_t lastframe;
++	spinlock_t	lock;
++#ifdef __USE_TIMER_4_SOF__
++	struct hrtimer hr_timer;
++#endif
++} ifxhcd_hcd_t;
++
++/* Gets the ifxhcd_hcd from a struct usb_hcd */
++static inline ifxhcd_hcd_t *syshcd_to_ifxhcd(struct usb_hcd *syshcd)
++{
++	return (ifxhcd_hcd_t *)(syshcd->hcd_priv[0]);
++}
++
++/* Gets the struct usb_hcd that contains a ifxhcd_hcd_t. */
++static inline struct usb_hcd *ifxhcd_to_syshcd(ifxhcd_hcd_t *ifxhcd)
++{
++	return (struct usb_hcd *)(ifxhcd->syshcd);
++}
++
++/*! \brief HCD Create/Destroy Functions */
++/*@{*/
++	extern int  ifxhcd_init  (ifxhcd_hcd_t *_ifxhcd);
++	extern void ifxhcd_remove(ifxhcd_hcd_t *_ifxhcd);
++/*@}*/
++
++/*! \brief Linux HC Driver API Functions */
++/*@{*/
++extern int  ifxhcd_start(struct usb_hcd *hcd);
++extern void ifxhcd_stop (struct usb_hcd *hcd);
++extern int  ifxhcd_get_frame_number(struct usb_hcd *hcd);
++
++
++/*!
++   \brief This function does the setup for a data transfer for a host channel and
++  starts the transfer. May be called in either Slave mode or DMA mode. In
++  Slave mode, the caller must ensure that there is sufficient space in the
++  request queue and Tx Data FIFO.
++
++  For an OUT transfer in Slave mode, it loads a data packet into the
++  appropriate FIFO. If necessary, additional data packets will be loaded in
++  the Host ISR.
++
++  For an IN transfer in Slave mode, a data packet is requested. The data
++  packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
++  additional data packets are requested in the Host ISR.
++
++  For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
++  register along with a packet count of 1 and the channel is enabled. This
++  causes a single PING transaction to occur. Other fields in HCTSIZ are
++  simply set to 0 since no data transfer occurs in this case.
++
++  For a PING transfer in DMA mode, the HCTSIZ register is initialized with
++  all the information required to perform the subsequent data transfer. In
++  addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
++  controller performs the entire PING protocol, then starts the data
++  transfer.
++
++  @param _ifxhc Information needed to initialize the host channel. The xfer_len
++  value may be reduced to accommodate the max widths of the XferSize and
++  PktCnt fields in the HCTSIZn register. The multi_count value may be changed
++  to reflect the final xfer_len value.
++ */
++extern void ifxhcd_hc_start(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc);
++
++//extern int ifxhcd_urb_enqueue(struct usb_hcd *_syshcd, struct usb_host_endpoint *_sysep, struct urb *_urb, gfp_t mem_flags);
++//extern int ifxhcd_urb_dequeue(struct usb_hcd *_syshcd, struct urb *_urb);
++extern irqreturn_t ifxhcd_irq(struct usb_hcd *_syshcd);
++int ifxhcd_urb_enqueue( struct usb_hcd           *_syshcd,
++                        /*--- struct usb_host_endpoint *_sysep, Parameter im 2.6.28 entfallen ---*/
++                        struct urb               *_urb,
++                        gfp_t                     _mem_flags);
++int ifxhcd_urb_dequeue( struct usb_hcd *_syshcd,
++                        struct urb *_urb, int status /* Parameter neu in 2.6.28 */);
++
++extern void ifxhcd_endpoint_disable(struct usb_hcd *_syshcd, struct usb_host_endpoint *_sysep);
++
++extern int ifxhcd_hub_status_data(struct usb_hcd *_syshcd, char *_buf);
++extern int ifxhcd_hub_control( struct usb_hcd *_syshcd,
++                               u16             _typeReq,
++                               u16             _wValue,
++                               u16             _wIndex,
++                               char           *_buf,
++                               u16             _wLength);
++
++/*@}*/
++
++/*! \brief Transaction Execution Functions */
++/*@{*/
++extern void                      ifxhcd_complete_urb       (ifxhcd_hcd_t *_ifxhcd, ifxhcd_urbd_t *_urbd,  int _status);
++
++/*@}*/
++
++/*! \brief Deferred Transaction Execution Functions */
++/*@{*/
++
++/*== AVM/BC 20101111  URB Complete List ==*/
++extern void                      defer_ifxhcd_complete_urb       (ifxhcd_hcd_t *_ifxhcd, ifxhcd_urbd_t *_urbd,  int _status);
++
++/*!
++   \brief Clears the transfer state for a host channel. This function is normally
++  called after a transfer is done and the host channel is being released.
++ */
++extern void ifxhcd_hc_cleanup(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc);
++
++/*!
++   \brief Attempts to halt a host channel. This function should only be called in
++  Slave mode or to abort a transfer in either Slave mode or DMA mode. Under
++  normal circumstances in DMA mode, the controller halts the channel when the
++  transfer is complete or a condition occurs that requires application
++  intervention.
++
++  In slave mode, checks for a free request queue entry, then sets the Channel
++  Enable and Channel Disable bits of the Host Channel Characteristics
++  register of the specified channel to intiate the halt. If there is no free
++  request queue entry, sets only the Channel Disable bit of the HCCHARn
++  register to flush requests for this channel. In the latter case, sets a
++  flag to indicate that the host channel needs to be halted when a request
++  queue slot is open.
++
++  In DMA mode, always sets the Channel Enable and Channel Disable bits of the
++  HCCHARn register. The controller ensures there is space in the request
++  queue before submitting the halt request.
++
++  Some time may elapse before the core flushes any posted requests for this
++  host channel and halts. The Channel Halted interrupt handler completes the
++  deactivation of the host channel.
++ */
++extern void ifxhcd_hc_halt(ifxusb_core_if_t *_core_if,
++                    ifxhcd_hc_t *_ifxhc,
++                    ifxhcd_halt_status_e _halt_status);
++
++/*!
++   \brief Prepares a host channel for transferring packets to/from a specific
++  endpoint. The HCCHARn register is set up with the characteristics specified
++  in _ifxhc. Host channel interrupts that may need to be serviced while this
++  transfer is in progress are enabled.
++ */
++extern void ifxhcd_hc_init(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc);
++
++/*!
++   \brief This function is called to handle the disconnection of host port.
++ */
++int32_t ifxhcd_disconnect(ifxhcd_hcd_t *_ifxhcd);
++/*@}*/
++
++/*!  \brief Interrupt Handler Functions */
++/*@{*/
++extern irqreturn_t ifxhcd_oc_irq(int _irq, void *_dev);
++
++extern int32_t ifxhcd_handle_oc_intr(ifxhcd_hcd_t *_ifxhcd);
++extern int32_t ifxhcd_handle_intr   (ifxhcd_hcd_t *_ifxhcd);
++/*@}*/
++
++
++/*! \brief Schedule Queue Functions */
++/*@{*/
++extern ifxhcd_epqh_t *ifxhcd_epqh_create (ifxhcd_hcd_t *_ifxhcd, struct urb *_urb);
++extern void           ifxhcd_epqh_free   (                       ifxhcd_epqh_t *_epqh);
++extern void           select_eps      (ifxhcd_hcd_t *_ifxhcd);
++extern void           process_channels(ifxhcd_hcd_t *_ifxhcd);
++extern void           process_channels_sub(ifxhcd_hcd_t *_ifxhcd);
++extern void 		  complete_channel(ifxhcd_hcd_t *_ifxhcd, ifxhcd_hc_t *_ifxhc, ifxhcd_urbd_t *_urbd);
++extern void           ifxhcd_epqh_ready(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh);
++extern void           ifxhcd_epqh_active(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh);
++extern void           ifxhcd_epqh_idle(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh);
++extern void           ifxhcd_epqh_idle_periodic(ifxhcd_epqh_t *_epqh);
++extern int            ifxhcd_urbd_create (ifxhcd_hcd_t *_ifxhcd,struct urb *_urb);
++/*@}*/
++
++/*! \brief Gets the usb_host_endpoint associated with an URB. */
++static inline struct usb_host_endpoint *ifxhcd_urb_to_endpoint(struct urb *_urb)
++{
++	struct usb_device *dev = _urb->dev;
++	int    ep_num = usb_pipeendpoint(_urb->pipe);
++
++	return (usb_pipein(_urb->pipe))?(dev->ep_in[ep_num]):(dev->ep_out[ep_num]);
++}
++
++/*!
++ * \brief Gets the endpoint number from a _bEndpointAddress argument. The endpoint is
++ * qualified with its direction (possible 32 endpoints per device).
++ */
++#define ifxhcd_ep_addr_to_endpoint(_bEndpointAddress_) ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \
++                                                       ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4)
++
++
++/* AVM/WK: not needed?
++
++extern struct usb_device *usb_alloc_dev  (struct usb_device *parent, struct usb_bus *, unsigned port);
++extern int                usb_add_hcd    (struct usb_hcd *syshcd, unsigned int irqnum, unsigned long irqflags);
++extern void               usb_remove_hcd (struct usb_hcd *syshcd);
++extern struct usb_hcd    *usb_create_hcd (const struct hc_driver *driver, struct device *dev, char *bus_name);
++extern void               usb_hcd_giveback_urb (struct usb_hcd *syshcd, struct urb *urb);
++extern void               usb_put_hcd       (struct usb_hcd *syshcd);
++extern long               usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount);
++
++*/
++/** Internal Functions */
++void         ifxhcd_dump_state(ifxhcd_hcd_t *_ifxhcd);
++extern char *syserr(int errno);
++
++/*@}*//*IFXUSB_HCD*/
++
++#endif // __IFXHCD_H__
+diff --git a/drivers/usb/ifxhcd/ifxhcd_es.c b/drivers/usb/ifxhcd/ifxhcd_es.c
+new file mode 100644
+index 0000000..ef9e8c0
+--- /dev/null
++++ b/drivers/usb/ifxhcd/ifxhcd_es.c
+@@ -0,0 +1,549 @@
++/*****************************************************************************
++ **   FILE NAME       : ifxhcd_es.c
++ **   PROJECT         : IFX USB sub-system V3
++ **   MODULES         : IFX USB sub-system Host and Device driver
++ **   SRC VERSION     : 1.0
++ **   DATE            : 1/Jan/2009
++ **   AUTHOR          : Chen, Howard
++ **   DESCRIPTION     : The file contain function to enable host mode USB-IF Electrical Test function.
++ *****************************************************************************/
++
++/*!
++ \file ifxhcd_es.c
++ \ingroup IFXUSB_DRIVER_V3
++ \brief The file contain function to enable host mode USB-IF Electrical Test function.
++*/
++
++#include <linux/version.h>
++#include "ifxusb_version.h"
++
++#include <linux/kernel.h>
++
++#include <linux/errno.h>
++
++#include <linux/dma-mapping.h>
++
++#include "ifxusb_plat.h"
++#include "ifxusb_regs.h"
++#include "ifxusb_cif.h"
++#include "ifxhcd.h"
++
++
++#ifdef __WITH_HS_ELECT_TST__
++	/*
++	 * Quick and dirty hack to implement the HS Electrical Test
++	 * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature.
++	 *
++	 * This code was copied from our userspace app "hset". It sends a
++	 * Get Device Descriptor control sequence in two parts, first the
++	 * Setup packet by itself, followed some time later by the In and
++	 * Ack packets. Rather than trying to figure out how to add this
++	 * functionality to the normal driver code, we just hijack the
++	 * hardware, using these two function to drive the hardware
++	 * directly.
++	 */
++
++
++	void do_setup(ifxusb_core_if_t *_core_if)
++	{
++
++		ifxusb_core_global_regs_t *global_regs    = _core_if->core_global_regs;
++		ifxusb_host_global_regs_t *hc_global_regs = _core_if->host_global_regs;
++		ifxusb_hc_regs_t          *hc_regs        = _core_if->hc_regs[0];
++		uint32_t                  *data_fifo      = _core_if->data_fifo[0];
++
++		gint_data_t    gintsts;
++		hctsiz_data_t  hctsiz;
++		hcchar_data_t  hcchar;
++		haint_data_t   haint;
++		hcint_data_t   hcint;
++
++
++		/* Enable HAINTs */
++		ifxusb_wreg(&hc_global_regs->haintmsk, 0x0001);
++
++		/* Enable HCINTs */
++		ifxusb_wreg(&hc_regs->hcintmsk, 0x04a3);
++
++		/* Read GINTSTS */
++		gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++		//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++		/* Read HAINT */
++		haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
++		//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++		/* Read HCINT */
++		hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
++		//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++		/* Read HCCHAR */
++		hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++		//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++		/* Clear HCINT */
++		ifxusb_wreg(&hc_regs->hcint, hcint.d32);
++
++		/* Clear HAINT */
++		ifxusb_wreg(&hc_global_regs->haint, haint.d32);
++
++		/* Clear GINTSTS */
++		ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
++
++		/* Read GINTSTS */
++		gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++		//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++		/*
++		 * Send Setup packet (Get Device Descriptor)
++		 */
++
++		/* Make sure channel is disabled */
++		hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++		if (hcchar.b.chen) {
++			//fprintf(stderr, "Channel already enabled 1, HCCHAR = %08x\n", hcchar.d32);
++			hcchar.b.chdis = 1;
++	//		hcchar.b.chen = 1;
++			ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
++			//sleep(1);
++			mdelay(1000);
++
++			/* Read GINTSTS */
++			gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++			//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++			/* Read HAINT */
++			haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
++			//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++			/* Read HCINT */
++			hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
++			//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++			/* Read HCCHAR */
++			hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++			//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++			/* Clear HCINT */
++			ifxusb_wreg(&hc_regs->hcint, hcint.d32);
++
++			/* Clear HAINT */
++			ifxusb_wreg(&hc_global_regs->haint, haint.d32);
++
++			/* Clear GINTSTS */
++			ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
++
++			hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++			//if (hcchar.b.chen) {
++			//	fprintf(stderr, "** Channel _still_ enabled 1, HCCHAR = %08x **\n", hcchar.d32);
++			//}
++		}
++
++		/* Set HCTSIZ */
++		hctsiz.d32 = 0;
++		hctsiz.b.xfersize = 8;
++		hctsiz.b.pktcnt = 1;
++		hctsiz.b.pid = IFXUSB_HC_PID_SETUP;
++		ifxusb_wreg(&hc_regs->hctsiz, hctsiz.d32);
++
++		/* Set HCCHAR */
++		hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++		hcchar.b.eptype = IFXUSB_EP_TYPE_CTRL;
++		hcchar.b.epdir = 0;
++		hcchar.b.epnum = 0;
++		hcchar.b.mps = 8;
++		hcchar.b.chen = 1;
++		ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
++
++		/* Fill FIFO with Setup data for Get Device Descriptor */
++		ifxusb_wreg(data_fifo++, 0x01000680);
++		ifxusb_wreg(data_fifo++, 0x00080000);
++
++		gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++		//fprintf(stderr, "Waiting for HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++		/* Wait for host channel interrupt */
++		do {
++			gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++		} while (gintsts.b.hcintr == 0);
++
++		//fprintf(stderr, "Got HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++		/* Disable HCINTs */
++		ifxusb_wreg(&hc_regs->hcintmsk, 0x0000);
++
++		/* Disable HAINTs */
++		ifxusb_wreg(&hc_global_regs->haintmsk, 0x0000);
++
++		/* Read HAINT */
++		haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
++		//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++		/* Read HCINT */
++		hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
++		//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++		/* Read HCCHAR */
++		hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++		//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++		/* Clear HCINT */
++		ifxusb_wreg(&hc_regs->hcint, hcint.d32);
++
++		/* Clear HAINT */
++		ifxusb_wreg(&hc_global_regs->haint, haint.d32);
++
++		/* Clear GINTSTS */
++		ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
++
++		/* Read GINTSTS */
++		gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++		//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++	}
++
++	void do_in_ack(ifxusb_core_if_t *_core_if)
++	{
++
++		ifxusb_core_global_regs_t *global_regs    = _core_if->core_global_regs;
++		ifxusb_host_global_regs_t *hc_global_regs = _core_if->host_global_regs;
++		ifxusb_hc_regs_t          *hc_regs        = _core_if->hc_regs[0];
++		uint32_t                  *data_fifo      = _core_if->data_fifo[0];
++
++		gint_data_t        gintsts;
++		hctsiz_data_t      hctsiz;
++		hcchar_data_t      hcchar;
++		haint_data_t       haint;
++		hcint_data_t       hcint;
++		grxsts_data_t      grxsts;
++
++		/* Enable HAINTs */
++		ifxusb_wreg(&hc_global_regs->haintmsk, 0x0001);
++
++		/* Enable HCINTs */
++		ifxusb_wreg(&hc_regs->hcintmsk, 0x04a3);
++
++		/* Read GINTSTS */
++		gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++		//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++		/* Read HAINT */
++		haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
++		//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++		/* Read HCINT */
++		hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
++		//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++		/* Read HCCHAR */
++		hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++		//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++		/* Clear HCINT */
++		ifxusb_wreg(&hc_regs->hcint, hcint.d32);
++
++		/* Clear HAINT */
++		ifxusb_wreg(&hc_global_regs->haint, haint.d32);
++
++		/* Clear GINTSTS */
++		ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
++
++		/* Read GINTSTS */
++		gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++		//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++		/*
++		 * Receive Control In packet
++		 */
++
++		/* Make sure channel is disabled */
++		hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++		if (hcchar.b.chen) {
++			//fprintf(stderr, "Channel already enabled 2, HCCHAR = %08x\n", hcchar.d32);
++			hcchar.b.chdis = 1;
++			hcchar.b.chen = 1;
++			ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
++			//sleep(1);
++			mdelay(1000);
++
++			/* Read GINTSTS */
++			gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++			//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++			/* Read HAINT */
++			haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
++			//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++			/* Read HCINT */
++			hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
++			//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++			/* Read HCCHAR */
++			hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++			//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++			/* Clear HCINT */
++			ifxusb_wreg(&hc_regs->hcint, hcint.d32);
++
++			/* Clear HAINT */
++			ifxusb_wreg(&hc_global_regs->haint, haint.d32);
++
++			/* Clear GINTSTS */
++			ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
++
++			hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++			//if (hcchar.b.chen) {
++			//	fprintf(stderr, "** Channel _still_ enabled 2, HCCHAR = %08x **\n", hcchar.d32);
++			//}
++		}
++
++		/* Set HCTSIZ */
++		hctsiz.d32 = 0;
++		hctsiz.b.xfersize = 8;
++		hctsiz.b.pktcnt = 1;
++		hctsiz.b.pid = IFXUSB_HC_PID_DATA1;
++		ifxusb_wreg(&hc_regs->hctsiz, hctsiz.d32);
++
++		/* Set HCCHAR */
++		hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++		hcchar.b.eptype = IFXUSB_EP_TYPE_CTRL;
++		hcchar.b.epdir = 1;
++		hcchar.b.epnum = 0;
++		hcchar.b.mps = 8;
++		hcchar.b.chen = 1;
++		ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
++
++		gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++		//fprintf(stderr, "Waiting for RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++		/* Wait for receive status queue interrupt */
++		do {
++			gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++		} while (gintsts.b.rxstsqlvl == 0);
++
++		//fprintf(stderr, "Got RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++		/* Read RXSTS */
++		grxsts.d32 = ifxusb_rreg(&global_regs->grxstsp);
++		//fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
++
++		/* Clear RXSTSQLVL in GINTSTS */
++		gintsts.d32 = 0;
++		gintsts.b.rxstsqlvl = 1;
++		ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
++
++		switch (grxsts.hb.pktsts) {
++			case IFXUSB_HSTS_DATA_UPDT:
++				/* Read the data into the host buffer */
++				if (grxsts.hb.bcnt > 0) {
++					int i;
++					int word_count = (grxsts.hb.bcnt + 3) / 4;
++
++					for (i = 0; i < word_count; i++) {
++						(void)ifxusb_rreg(data_fifo++);
++					}
++				}
++
++				//fprintf(stderr, "Received %u bytes\n", (unsigned)grxsts.hb.bcnt);
++				break;
++
++			default:
++				//fprintf(stderr, "** Unexpected GRXSTS packet status 1 **\n");
++				break;
++		}
++
++		gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++		//fprintf(stderr, "Waiting for RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++		/* Wait for receive status queue interrupt */
++		do {
++			gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++		} while (gintsts.b.rxstsqlvl == 0);
++
++		//fprintf(stderr, "Got RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++		/* Read RXSTS */
++		grxsts.d32 = ifxusb_rreg(&global_regs->grxstsp);
++		//fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
++
++		/* Clear RXSTSQLVL in GINTSTS */
++		gintsts.d32 = 0;
++		gintsts.b.rxstsqlvl = 1;
++		ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
++
++		switch (grxsts.hb.pktsts) {
++			case IFXUSB_HSTS_XFER_COMP:
++				break;
++
++			default:
++				//fprintf(stderr, "** Unexpected GRXSTS packet status 2 **\n");
++				break;
++		}
++
++		gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++		//fprintf(stderr, "Waiting for HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++		/* Wait for host channel interrupt */
++		do {
++			gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++		} while (gintsts.b.hcintr == 0);
++
++		//fprintf(stderr, "Got HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++		/* Read HAINT */
++		haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
++		//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++		/* Read HCINT */
++		hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
++		//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++		/* Read HCCHAR */
++		hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++		//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++		/* Clear HCINT */
++		ifxusb_wreg(&hc_regs->hcint, hcint.d32);
++
++		/* Clear HAINT */
++		ifxusb_wreg(&hc_global_regs->haint, haint.d32);
++
++		/* Clear GINTSTS */
++		ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
++
++		/* Read GINTSTS */
++		gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++		//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++	//	usleep(100000);
++	//	mdelay(100);
++		mdelay(1);
++
++		/*
++		 * Send handshake packet
++		 */
++
++		/* Read HAINT */
++		haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
++		//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++		/* Read HCINT */
++		hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
++		//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++		/* Read HCCHAR */
++		hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++		//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++		/* Clear HCINT */
++		ifxusb_wreg(&hc_regs->hcint, hcint.d32);
++
++		/* Clear HAINT */
++		ifxusb_wreg(&hc_global_regs->haint, haint.d32);
++
++		/* Clear GINTSTS */
++		ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
++
++		/* Read GINTSTS */
++		gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++		//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++		/* Make sure channel is disabled */
++		hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++		if (hcchar.b.chen) {
++			//fprintf(stderr, "Channel already enabled 3, HCCHAR = %08x\n", hcchar.d32);
++			hcchar.b.chdis = 1;
++			hcchar.b.chen = 1;
++			ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
++			//sleep(1);
++			mdelay(1000);
++
++			/* Read GINTSTS */
++			gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++			//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++			/* Read HAINT */
++			haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
++			//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++			/* Read HCINT */
++			hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
++			//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++			/* Read HCCHAR */
++			hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++			//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++			/* Clear HCINT */
++			ifxusb_wreg(&hc_regs->hcint, hcint.d32);
++
++			/* Clear HAINT */
++			ifxusb_wreg(&hc_global_regs->haint, haint.d32);
++
++			/* Clear GINTSTS */
++			ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
++
++			hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++			//if (hcchar.b.chen) {
++			//	fprintf(stderr, "** Channel _still_ enabled 3, HCCHAR = %08x **\n", hcchar.d32);
++			//}
++		}
++
++		/* Set HCTSIZ */
++		hctsiz.d32 = 0;
++		hctsiz.b.xfersize = 0;
++		hctsiz.b.pktcnt = 1;
++		hctsiz.b.pid = IFXUSB_HC_PID_DATA1;
++		ifxusb_wreg(&hc_regs->hctsiz, hctsiz.d32);
++
++		/* Set HCCHAR */
++		hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++		hcchar.b.eptype = IFXUSB_EP_TYPE_CTRL;
++		hcchar.b.epdir = 0;
++		hcchar.b.epnum = 0;
++		hcchar.b.mps = 8;
++		hcchar.b.chen = 1;
++		ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
++
++		gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++		//fprintf(stderr, "Waiting for HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
++
++		/* Wait for host channel interrupt */
++		do {
++			gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++		} while (gintsts.b.hcintr == 0);
++
++		//fprintf(stderr, "Got HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
++
++		/* Disable HCINTs */
++		ifxusb_wreg(&hc_regs->hcintmsk, 0x0000);
++
++		/* Disable HAINTs */
++		ifxusb_wreg(&hc_global_regs->haintmsk, 0x0000);
++
++		/* Read HAINT */
++		haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
++		//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++		/* Read HCINT */
++		hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
++		//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++		/* Read HCCHAR */
++		hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++		//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++		/* Clear HCINT */
++		ifxusb_wreg(&hc_regs->hcint, hcint.d32);
++
++		/* Clear HAINT */
++		ifxusb_wreg(&hc_global_regs->haint, haint.d32);
++
++		/* Clear GINTSTS */
++		ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
++
++		/* Read GINTSTS */
++		gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++		//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++	}
++#endif //__WITH_HS_ELECT_TST__
++
+diff --git a/drivers/usb/ifxhcd/ifxhcd_intr.c b/drivers/usb/ifxhcd/ifxhcd_intr.c
+new file mode 100644
+index 0000000..76fe602
+--- /dev/null
++++ b/drivers/usb/ifxhcd/ifxhcd_intr.c
+@@ -0,0 +1,3742 @@
++/*****************************************************************************
++ **   FILE NAME       : ifxhcd_intr.c
++ **   PROJECT         : IFX USB sub-system V3
++ **   MODULES         : IFX USB sub-system Host and Device driver
++ **   SRC VERSION     : 1.0
++ **   DATE            : 1/Jan/2009
++ **   AUTHOR          : Chen, Howard
++ **   DESCRIPTION     : This file contains the implementation of the HCD Interrupt handlers.
++ *****************************************************************************/
++
++/*!
++ \file ifxhcd_intr.c
++ \ingroup IFXUSB_DRIVER_V3
++ \brief This file contains the implementation of the HCD Interrupt handlers.
++*/
++
++
++#include <linux/version.h>
++#include "ifxusb_version.h"
++
++#include "ifxusb_plat.h"
++#include "ifxusb_regs.h"
++#include "ifxusb_cif.h"
++
++#include "ifxhcd.h"
++
++/* AVM/WK 20100520*/
++#ifdef __EN_ISOC__
++#error AVM/WK: CONFIG_USB_HOST_IFX_WITH_ISO currently not supported!
++#endif
++
++/* Macro used to clear one channel interrupt */
++#define clear_hc_int(_hc_regs_,_intr_) \
++	do { \
++		hcint_data_t hcint_clear = {.d32 = 0}; \
++		hcint_clear.b._intr_ = 1; \
++		ifxusb_wreg(&((_hc_regs_)->hcint), hcint_clear.d32); \
++	} while (0)
++
++/*
++ * Macro used to disable one channel interrupt. Channel interrupts are
++ * disabled when the channel is halted or released by the interrupt handler.
++ * There is no need to handle further interrupts of that type until the
++ * channel is re-assigned. In fact, subsequent handling may cause crashes
++ * because the channel structures are cleaned up when the channel is released.
++ */
++#define disable_hc_int(_hc_regs_,_intr_) \
++	do { \
++		hcint_data_t hcintmsk = {.d32 = 0}; \
++		hcintmsk.b._intr_ = 1; \
++		ifxusb_mreg(&((_hc_regs_)->hcintmsk), hcintmsk.d32, 0); \
++	} while (0)
++
++#define enable_hc_int(_hc_regs_,_intr_) \
++	do { \
++		hcint_data_t hcintmsk = {.d32 = 0}; \
++		hcintmsk.b._intr_ = 1; \
++		ifxusb_mreg(&((_hc_regs_)->hcintmsk),0, hcintmsk.d32); \
++	} while (0)
++
++/*
++ * Save the starting data toggle for the next transfer. The data toggle is
++ * saved in the QH for non-control transfers and it's saved in the QTD for
++ * control transfers.
++ */
++uint8_t read_data_toggle(ifxusb_hc_regs_t *_hc_regs)
++{
++	hctsiz_data_t hctsiz;
++	hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
++	return(hctsiz.b.pid);
++}
++
++
++static void release_channel_dump(ifxhcd_hc_t      *ifxhc,
++                               struct urb       *urb,
++                               ifxhcd_epqh_t    *epqh,
++                               ifxhcd_urbd_t    *urbd,
++                               ifxhcd_halt_status_e  halt_status)
++{
++	#ifdef __DEBUG__
++		printk(KERN_INFO);
++		switch (halt_status)
++		{
++			case HC_XFER_NO_HALT_STATUS:
++				printk("HC_XFER_NO_HALT_STATUS");break;
++			case HC_XFER_URB_COMPLETE:
++				printk("HC_XFER_URB_COMPLETE");break;
++			case HC_XFER_AHB_ERR:
++				printk("HC_XFER_AHB_ERR");break;
++			case HC_XFER_STALL:
++				printk("HC_XFER_STALL");break;
++			case HC_XFER_BABBLE_ERR:
++				printk("HC_XFER_BABBLE_ERR");break;
++			case HC_XFER_XACT_ERR:
++				printk("HC_XFER_XACT_ERR");break;
++			case HC_XFER_URB_DEQUEUE:
++				printk("HC_XFER_URB_DEQUEUE");break;
++			case HC_XFER_FRAME_OVERRUN:
++				printk("HC_XFER_FRAME_OVERRUN");break;
++			case HC_XFER_DATA_TOGGLE_ERR:
++				printk("HC_XFER_DATA_TOGGLE_ERR");break;
++			case HC_XFER_NAK:
++				printk("HC_XFER_NAK");break;
++			case HC_XFER_COMPLETE:
++				printk("HC_XFER_COMPLETE");break;
++			default:
++				printk("KNOWN");break;
++		}
++		if(ifxhc)
++			printk("Ch %d %s%s S%d " , ifxhc->hc_num
++				,(ifxhc->ep_type == IFXUSB_EP_TYPE_CTRL)?"CTRL-":
++				   ((ifxhc->ep_type == IFXUSB_EP_TYPE_BULK)?"BULK-":
++				     ((ifxhc->ep_type == IFXUSB_EP_TYPE_INTR)?"INTR-":
++				       ((ifxhc->ep_type == IFXUSB_EP_TYPE_ISOC)?"ISOC-":"????"
++				       )
++				     )
++				   )
++				,(ifxhc->is_in)?"IN":"OUT"
++				,(ifxhc->split)
++				);
++		else
++			printk(" [NULL HC] ");
++		printk("urb=%p epqh=%p urbd=%p\n",urb,epqh,urbd);
++
++		if(urb)
++		{
++			printk(KERN_INFO "  Device address: %d\n", usb_pipedevice(urb->pipe));
++			printk(KERN_INFO "  Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
++				    (usb_pipein(urb->pipe) ? "IN" : "OUT"));
++			printk(KERN_INFO "  Endpoint type: %s\n",
++				    ({char *pipetype;
++				    switch (usb_pipetype(urb->pipe)) {
++					    case PIPE_CONTROL: pipetype = "CTRL"; break;
++					    case PIPE_BULK: pipetype = "BULK"; break;
++					    case PIPE_INTERRUPT: pipetype = "INTR"; break;
++					    case PIPE_ISOCHRONOUS: pipetype = "ISOC"; break;
++					    default: pipetype = "????"; break;
++				    }; pipetype;}));
++			printk(KERN_INFO "  Speed: %s\n",
++				    ({char *speed;
++				    switch (urb->dev->speed) {
++					    case USB_SPEED_HIGH: speed = "HS"; break;
++					    case USB_SPEED_FULL: speed = "FS"; break;
++					    case USB_SPEED_LOW: speed = "LS"; break;
++				    	default: speed = "????"; break;
++				    }; speed;}));
++			printk(KERN_INFO "  Max packet size: %d\n",
++				    usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
++			printk(KERN_INFO "  Data buffer length: %d\n", urb->transfer_buffer_length);
++			printk(KERN_INFO "  Transfer buffer: %p, Transfer DMA: %p\n",
++				    urb->transfer_buffer, (void *)urb->transfer_dma);
++			printk(KERN_INFO "  Setup buffer: %p, Setup DMA: %p\n",
++				    urb->setup_packet, (void *)urb->setup_dma);
++			printk(KERN_INFO "  Interval: %d\n", urb->interval);
++			switch (urb->status)
++			{
++				case HC_XFER_NO_HALT_STATUS:
++					printk(KERN_INFO "  STATUS:HC_XFER_NO_HALT_STATUS\n");break;
++				case HC_XFER_URB_COMPLETE:
++					printk(KERN_INFO "  STATUS:HC_XFER_URB_COMPLETE\n");break;
++				case HC_XFER_AHB_ERR:
++					printk(KERN_INFO "  STATUS:HC_XFER_AHB_ERR\n");break;
++				case HC_XFER_STALL:
++					printk(KERN_INFO "  STATUS:HC_XFER_STALL\n");break;
++				case HC_XFER_BABBLE_ERR:
++					printk(KERN_INFO "  STATUS:HC_XFER_BABBLE_ERR\n");break;
++				case HC_XFER_XACT_ERR:
++					printk(KERN_INFO "  STATUS:HC_XFER_XACT_ERR\n");break;
++				case HC_XFER_URB_DEQUEUE:
++					printk(KERN_INFO "  STATUS:HC_XFER_URB_DEQUEUE\n");break;
++				case HC_XFER_FRAME_OVERRUN:
++					printk(KERN_INFO "  STATUS:HC_XFER_FRAME_OVERRUN\n");break;
++				case HC_XFER_DATA_TOGGLE_ERR:
++					printk(KERN_INFO "  STATUS:HC_XFER_DATA_TOGGLE_ERR\n");break;
++				case HC_XFER_COMPLETE:
++					printk(KERN_INFO "  STATUS:HC_XFER_COMPLETE\n");break;
++				default:
++					printk(KERN_INFO "  STATUS:KNOWN\n");break;
++			}
++		}
++	#endif
++}
++
++
++static void release_channel(ifxhcd_hcd_t          *_ifxhcd,
++                            ifxhcd_hc_t           *_ifxhc,
++                            ifxhcd_halt_status_e  _halt_status)
++{
++	ifxusb_hc_regs_t *hc_regs = _ifxhcd->core_if.hc_regs[_ifxhc->hc_num];
++	struct urb       *urb     = NULL;
++	ifxhcd_epqh_t    *epqh    = NULL;
++	ifxhcd_urbd_t    *urbd    = NULL;
++
++	IFX_DEBUGPL(DBG_HCDV, "  %s: channel %d, halt_status %d\n",
++		    __func__, _ifxhc->hc_num, _halt_status);
++
++	epqh=_ifxhc->epqh;
++
++	if(!epqh)
++		IFX_ERROR("%s epqh=null\n",__func__);
++	else
++	{
++		urbd=epqh->urbd;
++		if(!urbd)
++			IFX_ERROR("%s urbd=null\n",__func__);
++		else
++		{
++			urb=urbd->urb;
++			if(!urb)
++				IFX_ERROR("%s urb =null\n",__func__);
++			else {
++				/* == AVM/WK 20100710 Fix - Use toggle of usbcore ==*/
++				unsigned toggle = (read_data_toggle(hc_regs) == IFXUSB_HC_PID_DATA0)? 0: 1;
++				usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), usb_pipeout(urb->pipe), toggle);
++			}
++		}
++		//epqh->data_toggle = read_data_toggle(hc_regs);
++
++	}
++
++	switch (_halt_status)
++	{
++		case HC_XFER_NO_HALT_STATUS:
++			IFX_ERROR("%s: No halt_status, channel %d\n", __func__, _ifxhc->hc_num);
++			break;
++		case HC_XFER_COMPLETE:
++			IFX_ERROR("%s: Inavalid halt_status HC_XFER_COMPLETE, channel %d\n", __func__, _ifxhc->hc_num);
++			break;
++		case HC_XFER_URB_COMPLETE:
++		case HC_XFER_URB_DEQUEUE:
++		case HC_XFER_AHB_ERR:
++		case HC_XFER_XACT_ERR:
++		case HC_XFER_FRAME_OVERRUN:
++			if(urbd && urb) {
++				/* == 20110803 AVM/WK FIX set status, if still in progress == */
++				if (urb->status == -EINPROGRESS) {
++					switch (_halt_status) {
++					case HC_XFER_URB_COMPLETE:
++						urb->status = 0;
++						break;
++					case HC_XFER_URB_DEQUEUE:
++						urb->status = -ECONNRESET;
++						break;
++					case HC_XFER_AHB_ERR:
++					case HC_XFER_XACT_ERR:
++					case HC_XFER_FRAME_OVERRUN:
++						urb->status = -EPROTO;
++						break;
++					default:
++						break;
++					}
++				}
++				/*== AVM/BC 20101111 Deferred Complete ==*/
++				defer_ifxhcd_complete_urb(_ifxhcd, urbd, urb->status);
++			}
++			else
++			{
++				IFX_WARN("WARNING %s():%d urbd=%p urb=%p\n",__func__,__LINE__,urbd,urb);
++				release_channel_dump(_ifxhc,urb,epqh,urbd,_halt_status);
++			}
++			if(epqh)
++				ifxhcd_epqh_idle(_ifxhcd, epqh);
++			else
++			{
++				IFX_WARN("WARNING %s():%d epqh=%p\n",__func__,__LINE__,epqh);
++				release_channel_dump(_ifxhc,urb,epqh,urbd,_halt_status);
++			}
++
++			list_add_tail(&_ifxhc->hc_list_entry, &_ifxhcd->free_hc_list);
++			ifxhcd_hc_cleanup(&_ifxhcd->core_if, _ifxhc);
++			break;
++		case HC_XFER_STALL:
++			release_channel_dump(_ifxhc,urb,epqh,urbd,_halt_status);
++			if(urbd)
++				/*== AVM/BC 20101111 Deferred Complete ==*/
++				defer_ifxhcd_complete_urb(_ifxhcd, urbd, -EPIPE);
++			else
++				IFX_WARN("WARNING %s():%d urbd=%p urb=%p\n",__func__,__LINE__,urbd,urb);
++			if(epqh)
++			{
++//				epqh->data_toggle = 0;
++				ifxhcd_epqh_idle(_ifxhcd, epqh);
++			}
++			else
++				IFX_WARN("WARNING %s():%d epqh=%p\n",__func__,__LINE__,epqh);
++			list_add_tail(&_ifxhc->hc_list_entry, &_ifxhcd->free_hc_list);
++			ifxhcd_hc_cleanup(&_ifxhcd->core_if, _ifxhc);
++			break;
++		case HC_XFER_NAK:
++			release_channel_dump(_ifxhc,urb,epqh,urbd,_halt_status);
++			if(urbd)
++			{
++				//ifxhcd_complete_urb(_ifxhcd, urbd, -ETIMEDOUT);
++				urb->status = 0;
++				/*== AVM/BC 20101111 Deferred Complete ==*/
++				defer_ifxhcd_complete_urb(_ifxhcd, urbd, urb->status);
++			}
++			else
++				IFX_WARN("WARNING %s():%d urbd=%p urb=%p\n",__func__,__LINE__,urbd,urb);
++			if(epqh)
++				ifxhcd_epqh_idle(_ifxhcd, epqh);
++			else
++				IFX_WARN("WARNING %s():%d epqh=%p\n",__func__,__LINE__,epqh);
++			list_add_tail(&_ifxhc->hc_list_entry, &_ifxhcd->free_hc_list);
++			ifxhcd_hc_cleanup(&_ifxhcd->core_if, _ifxhc);
++			break;
++		case HC_XFER_BABBLE_ERR:
++		case HC_XFER_DATA_TOGGLE_ERR:
++			release_channel_dump(_ifxhc,urb,epqh,urbd,_halt_status);
++			if(urbd)
++				/*== AVM/BC 20101111 Deferred Complete ==*/
++				defer_ifxhcd_complete_urb(_ifxhcd, urbd, -EOVERFLOW);
++			else
++				IFX_WARN("WARNING %s():%d urbd=%p urb=%p\n",__func__,__LINE__,urbd,urb);
++			if(epqh)
++				ifxhcd_epqh_idle(_ifxhcd, epqh);
++			else
++				IFX_WARN("WARNING %s():%d epqh=%p\n",__func__,__LINE__,epqh);
++			list_add_tail(&_ifxhc->hc_list_entry, &_ifxhcd->free_hc_list);
++			ifxhcd_hc_cleanup(&_ifxhcd->core_if, _ifxhc);
++			break;
++	}
++	select_eps(_ifxhcd);
++}
++
++/*
++ * Updates the state of the URB after a Transfer Complete interrupt on the
++ * host channel. Updates the actual_length field of the URB based on the
++ * number of bytes transferred via the host channel. Sets the URB status
++ * if the data transfer is finished.
++ *
++ * @return 1 if the data transfer specified by the URB is completely finished,
++ * 0 otherwise.
++ */
++static int update_urb_state_xfer_comp(ifxhcd_hc_t       *_ifxhc,
++                                      ifxusb_hc_regs_t  *_hc_regs,
++                                      struct urb        *_urb,
++                                      ifxhcd_urbd_t      *_urbd)
++{
++	int xfer_done  = 0;
++
++	if (_ifxhc->is_in)
++	{
++		hctsiz_data_t hctsiz;
++		hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
++		_urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
++		if ((hctsiz.b.xfersize != 0) || (_urb->actual_length >= _urb->transfer_buffer_length))
++		{
++			xfer_done = 1;
++			_urb->status = 0;
++			/* 20110805 AVM/WK Workaround: catch overflow error here, hardware does not */
++			if (_urb->actual_length > _urb->transfer_buffer_length) {
++				_urb->status = -EOVERFLOW;
++			}
++			#if 0
++				if (_urb->actual_length < _urb->transfer_buffer_length && _urb->transfer_flags & URB_SHORT_NOT_OK)
++				_urb->status = -EREMOTEIO;
++			#endif
++		}
++
++	}
++	else
++	{
++		if (_ifxhc->split)
++			_urb->actual_length +=  _ifxhc->ssplit_out_xfer_count;
++		else
++			_urb->actual_length +=  _ifxhc->xfer_len;
++
++		if (_urb->actual_length >= _urb->transfer_buffer_length)
++		{
++			/*== AVM/BC WK 20110421 ZERO PACKET Workaround ==*/
++			if ((_ifxhc->short_rw == 1) && ( _ifxhc->xfer_len > 0) && ( _ifxhc->xfer_len % _ifxhc->mps == 0 ))
++			{
++				_ifxhc->short_rw = 0;
++				//Transfer not finished. Another iteration for ZLP.
++			}
++			else
++			{
++				xfer_done = 1;
++			}
++			_urb->status = 0;
++		}
++	}
++
++	#ifdef __DEBUG__
++		{
++			hctsiz_data_t 	hctsiz;
++			hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
++			IFX_DEBUGPL(DBG_HCDV, "IFXUSB: %s: %s, channel %d\n",
++				    __func__, (_ifxhc->is_in ? "IN" : "OUT"), _ifxhc->hc_num);
++			IFX_DEBUGPL(DBG_HCDV, "  hc->xfer_len %d\n", _ifxhc->xfer_len);
++			IFX_DEBUGPL(DBG_HCDV, "  hctsiz.xfersize %d\n", hctsiz.b.xfersize);
++			IFX_DEBUGPL(DBG_HCDV, "  urb->transfer_buffer_length %d\n",
++				    _urb->transfer_buffer_length);
++			IFX_DEBUGPL(DBG_HCDV, "  urb->actual_length %d\n", _urb->actual_length);
++		}
++	#endif
++	return xfer_done;
++}
++
++/*== AVM/BC 20101111 Function called with Lock ==*/
++
++void complete_channel(ifxhcd_hcd_t        *_ifxhcd,
++                            ifxhcd_hc_t          *_ifxhc,
++                            ifxhcd_urbd_t        *_urbd)
++{
++	ifxusb_hc_regs_t *hc_regs = _ifxhcd->core_if.hc_regs[_ifxhc->hc_num];
++	struct urb    *urb  = NULL;
++	ifxhcd_epqh_t *epqh = NULL;
++	int urb_xfer_done;
++
++	IFX_DEBUGPL(DBG_HCD, "--Complete Channel %d : \n", _ifxhc->hc_num);
++
++	if(!_urbd)
++	{
++		IFX_ERROR("ERROR %s():%d urbd=%p\n",__func__,__LINE__,_urbd);
++		return;
++	}
++
++	urb  = _urbd->urb;
++	epqh = _urbd->epqh;
++
++	if(!urb || !epqh)
++	{
++		IFX_ERROR("ERROR %s():%d urb=%p epqh=%p\n",__func__,__LINE__,urb,epqh);
++		return;
++	}
++
++	_ifxhc->do_ping=0;
++
++	if (_ifxhc->split)
++		_ifxhc->split = 1;
++
++	switch (epqh->ep_type)
++	{
++		case IFXUSB_EP_TYPE_CTRL:
++			switch (_ifxhc->control_phase)
++			{
++				case IFXHCD_CONTROL_SETUP:
++					IFX_DEBUGPL(DBG_HCDV, "  Control setup transaction done\n");
++					if (_urbd->xfer_len > 0)
++					{
++						_ifxhc->control_phase = IFXHCD_CONTROL_DATA;
++						_ifxhc->is_in         = _urbd->is_in;
++						_ifxhc->xfer_len      = _urbd->xfer_len;
++						#if   defined(__UNALIGNED_BUFFER_ADJ__)
++							if(epqh->using_aligned_buf)
++								_ifxhc->xfer_buff      = epqh->aligned_buf;
++							else
++						#endif
++								_ifxhc->xfer_buff      = _urbd->xfer_buff;
++					}
++					else
++					{
++						_ifxhc->control_phase = IFXHCD_CONTROL_STATUS;
++						_ifxhc->is_in          = 1;
++						_ifxhc->xfer_len       = 0;
++						_ifxhc->xfer_buff      = _ifxhcd->status_buf;
++					}
++					if(_ifxhc->is_in)
++						_ifxhc->short_rw       =0;
++					else
++						_ifxhc->short_rw       =(urb->transfer_flags & URB_ZERO_PACKET)?1:0;
++					_ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
++					_ifxhc->xfer_count     = 0;
++					_ifxhc->halt_status    = HC_XFER_NO_HALT_STATUS;
++					/*== AVM/BC 20101111 Lock not needed ==*/
++					process_channels_sub(_ifxhcd);
++					break;
++				case IFXHCD_CONTROL_DATA:
++					urb_xfer_done = update_urb_state_xfer_comp(_ifxhc, hc_regs, urb, _urbd);
++					if (urb_xfer_done)
++					{
++						_ifxhc->control_phase  = IFXHCD_CONTROL_STATUS;
++						_ifxhc->is_in          = (_urbd->is_in)?0:1;
++						_ifxhc->xfer_len       = 0;
++						_ifxhc->xfer_count     = 0;
++						_ifxhc->xfer_buff      = _ifxhcd->status_buf;
++						_ifxhc->halt_status    = HC_XFER_NO_HALT_STATUS;
++						_ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
++						if(_ifxhc->is_in)
++							_ifxhc->short_rw       =0;
++						else
++							_ifxhc->short_rw       =1;
++					}
++					else // continue
++					{
++						_ifxhc->xfer_len       = _urbd->xfer_len - urb->actual_length;
++						_ifxhc->xfer_count     = urb->actual_length;
++						_ifxhc->halt_status    = HC_XFER_NO_HALT_STATUS;
++						_ifxhc->data_pid_start = read_data_toggle(hc_regs);
++					}
++					/*== AVM/BC 20101111 Lock not needed ==*/
++					process_channels_sub(_ifxhcd);
++					break;
++				case IFXHCD_CONTROL_STATUS:
++					if (urb->status == -EINPROGRESS)
++						urb->status = 0;
++					release_channel(_ifxhcd,_ifxhc,HC_XFER_URB_COMPLETE);
++					break;
++			}
++			break;
++		case IFXUSB_EP_TYPE_BULK:
++			IFX_DEBUGPL(DBG_HCDV, "  Bulk transfer complete\n");
++			urb_xfer_done = update_urb_state_xfer_comp(_ifxhc, hc_regs, urb, _urbd);
++			if (urb_xfer_done)
++				release_channel(_ifxhcd,_ifxhc,HC_XFER_URB_COMPLETE);
++			else
++			{
++				_ifxhc->xfer_len       = _urbd->xfer_len - urb->actual_length;
++				_ifxhc->xfer_count     = urb->actual_length;
++				_ifxhc->halt_status    = HC_XFER_NO_HALT_STATUS;
++				_ifxhc->data_pid_start = read_data_toggle(hc_regs);
++				/*== AVM/BC 20101111 Lock not needed ==*/
++				process_channels_sub(_ifxhcd);
++			}
++			break;
++		case IFXUSB_EP_TYPE_INTR:
++			urb_xfer_done = update_urb_state_xfer_comp(_ifxhc, hc_regs, urb, _urbd);
++			release_channel(_ifxhcd,_ifxhc,HC_XFER_URB_COMPLETE);
++			break;
++		case IFXUSB_EP_TYPE_ISOC:
++//			if (_urbd->isoc_split_pos == IFXUSB_HCSPLIT_XACTPOS_ALL)
++//				halt_status = update_isoc_urb_state(_ifxhcd, _ifxhc, hc_regs, _urbd, HC_XFER_COMPLETE);
++//			complete_periodic_xfer(_ifxhcd, _ifxhc, hc_regs, _urbd, halt_status);
++			urb_xfer_done = update_urb_state_xfer_comp(_ifxhc, hc_regs, urb, _urbd);
++			release_channel(_ifxhcd,_ifxhc,HC_XFER_URB_COMPLETE);
++			break;
++	}
++}
++
++
++
++void showint(uint32_t val_hcint
++            ,uint32_t val_hcintmsk
++            ,uint32_t val_hctsiz)
++{
++#ifdef __DEBUG__
++	hcint_data_t  hcint    = {.d32 = val_hcint};
++	hcint_data_t  hcintmsk = {.d32 = val_hcintmsk};
++
++	printk(KERN_INFO "   WITH FLAG: Sz:%08x I:%08X/M:%08X %s%s%s%s%s%s%s%s%s%s\n"
++		,val_hctsiz,hcint.d32 ,hcintmsk.d32
++		,(hcint.b.datatglerr || hcintmsk.b.datatglerr)?
++		 (
++		   (hcint.b.datatglerr && hcintmsk.b.datatglerr)?"datatglerr[*/*] ":
++		    (
++		      (hcint.b.datatglerr)?"datatglerr[*/] ":"datatglerr[/*] "
++		    )
++		 )
++		 :""
++		,(hcint.b.frmovrun || hcintmsk.b.frmovrun)?
++		 (
++		   (hcint.b.frmovrun && hcintmsk.b.frmovrun)?"frmovrun[*/*] ":
++		    (
++		      (hcint.b.frmovrun)?"frmovrun[*/] ":"frmovrun[/*] "
++		    )
++		 )
++		 :""
++		,(hcint.b.bblerr || hcintmsk.b.bblerr)?
++		 (
++		   (hcint.b.bblerr && hcintmsk.b.bblerr)?"bblerr[*/*] ":
++		    (
++		      (hcint.b.bblerr)?"bblerr[*/] ":"bblerr[/*] "
++		    )
++		 )
++		 :""
++		,(hcint.b.xacterr || hcintmsk.b.xacterr)?
++		 (
++		   (hcint.b.xacterr && hcintmsk.b.xacterr)?"xacterr[*/*] ":
++		    (
++		      (hcint.b.xacterr)?"xacterr[*/] ":"xacterr[/*] "
++		    )
++		 )
++		 :""
++		,(hcint.b.nyet || hcintmsk.b.nyet)?
++		 (
++		   (hcint.b.nyet && hcintmsk.b.nyet)?"nyet[*/*] ":
++		    (
++		      (hcint.b.nyet)?"nyet[*/] ":"nyet[/*] "
++		    )
++		 )
++		 :""
++		,(hcint.b.nak || hcintmsk.b.nak)?
++		 (
++		   (hcint.b.nak && hcintmsk.b.nak)?"nak[*/*] ":
++		    (
++		      (hcint.b.nak)?"nak[*/] ":"nak[/*] "
++		    )
++		 )
++		 :""
++		,(hcint.b.ack || hcintmsk.b.ack)?
++		 (
++		   (hcint.b.ack && hcintmsk.b.ack)?"ack[*/*] ":
++		    (
++		      (hcint.b.ack)?"ack[*/] ":"ack[/*] "
++		    )
++		 )
++		 :""
++		,(hcint.b.stall || hcintmsk.b.stall)?
++		 (
++		   (hcint.b.stall && hcintmsk.b.stall)?"stall[*/*] ":
++		    (
++		      (hcint.b.stall)?"stall[*/] ":"stall[/*] "
++		    )
++		 )
++		 :""
++		,(hcint.b.ahberr || hcintmsk.b.ahberr)?
++		 (
++		   (hcint.b.ahberr && hcintmsk.b.ahberr)?"ahberr[*/*] ":
++		    (
++		      (hcint.b.ahberr)?"ahberr[*/] ":"ahberr[/*] "
++		    )
++		 )
++		 :""
++		,(hcint.b.xfercomp || hcintmsk.b.xfercomp)?
++		 (
++		   (hcint.b.xfercomp && hcintmsk.b.xfercomp)?"xfercomp[*/*] ":
++		    (
++		      (hcint.b.xfercomp)?"xfercomp[*/] ":"xfercomp[/*] "
++		    )
++		 )
++		 :""
++	);
++#endif
++}
++
++
++extern void ifxhcd_hc_dumb_rx(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc,uint8_t   *dump_buf);
++
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_ctrlbulk_rx_nonsplit(ifxhcd_hcd_t      *_ifxhcd,
++                                        ifxhcd_hc_t       *_ifxhc,
++                                        ifxusb_hc_regs_t  *_hc_regs,
++                                        ifxhcd_urbd_t     *_urbd)
++{
++	hcint_data_t  hcint;
++	hcint_data_t  hcintmsk;
++	hctsiz_data_t hctsiz;
++
++	hcint.d32    = ifxusb_rreg(&_hc_regs->hcint);
++	hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++	hctsiz.d32   = ifxusb_rreg(&_hc_regs->hctsiz);
++
++	disable_hc_int(_hc_regs,ack);
++	disable_hc_int(_hc_regs,nak);
++	disable_hc_int(_hc_regs,nyet);
++	_ifxhc->do_ping        = 0;
++
++	if(_ifxhc->halt_status == HC_XFER_NAK)
++	{
++		if(_ifxhc->nak_retry_r)
++		{
++			_urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
++			_ifxhc->nak_retry--;
++			if(_ifxhc->nak_retry)
++			{
++				_ifxhc->xfer_len           = _urbd->xfer_len - _urbd->urb->actual_length;
++				_ifxhc->xfer_count         = _urbd->urb->actual_length;
++				_ifxhc->data_pid_start     = read_data_toggle(_hc_regs);
++				_ifxhc->wait_for_sof   = 1;
++				_ifxhc->halt_status    = HC_XFER_NO_HALT_STATUS;
++				ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++			}
++			else
++			{
++				_ifxhc->wait_for_sof   = 0;
++				release_channel(_ifxhcd, _ifxhc, _ifxhc->halt_status);
++			}
++		}
++		else
++		{
++			_urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
++			_ifxhc->xfer_len           = _urbd->xfer_len - _urbd->urb->actual_length;
++			_ifxhc->xfer_count         = _urbd->urb->actual_length;
++			_ifxhc->data_pid_start     = read_data_toggle(_hc_regs);
++			_ifxhc->wait_for_sof   = 1;
++			_ifxhc->halt_status    = HC_XFER_NO_HALT_STATUS;
++			ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		}
++		return 1;
++	}
++
++	if (hcint.b.xfercomp)
++	{
++		_urbd->error_count     =0;
++		_ifxhc->wait_for_sof   =0;
++		complete_channel(_ifxhcd, _ifxhc, _urbd);
++		return 1;
++	}
++	else if (hcint.b.stall)
++	{
++		_urbd->error_count     =0;
++		_ifxhc->wait_for_sof   =0;
++		// ZLP shortcut
++		#if 0
++		if(hctsiz.b.pktcnt==0)
++			complete_channel(_ifxhcd, _ifxhc, _urbd);
++		else
++		#endif
++		{
++		// Stall FIFO compensation.
++		#if 0
++			int sz1,sz2;
++			sz2=_ifxhc->start_pkt_count - hctsiz.b.pktcnt;
++			sz2*=_ifxhc->mps;
++			sz1=_ifxhc->xfer_len - hctsiz.b.xfersize;
++			sz2-=sz1;
++			if(sz2)
++				ifxhcd_hc_dumb_rx(&_ifxhcd->core_if, _ifxhc,_ifxhc->epqh->dump_buf);
++		#endif
++			_urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
++			release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
++		}
++		return 1;
++	}
++	else if (hcint.b.bblerr)
++	{
++		_urbd->error_count     =0;
++		_ifxhc->wait_for_sof   =0;
++
++		// ZLP shortcut
++		#if 0
++		if(hctsiz.b.pktcnt==0)
++			complete_channel(_ifxhcd, _ifxhc, _urbd);
++		else
++		#endif
++		_urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
++		release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
++		return 1;
++	}
++	else if (hcint.b.xacterr)
++	{
++		// ZLP shortcut
++		#if 1
++		if(hctsiz.b.pktcnt==0)
++		{
++			_urbd->error_count     =0;
++			_ifxhc->wait_for_sof   =0;
++			complete_channel(_ifxhcd, _ifxhc, _urbd);
++		}
++		else
++		#endif
++		{
++			_urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
++			_ifxhc->xfer_len           = _urbd->xfer_len - _urbd->urb->actual_length;
++			_ifxhc->xfer_count         = _urbd->urb->actual_length;
++			_ifxhc->data_pid_start     = read_data_toggle(_hc_regs);
++
++			/* 20110803 AVM/WK FIX: Reset error count on any handshake */
++			if (hcint.b.nak || hcint.b.nyet || hcint.b.ack) {
++				_urbd->error_count = 1;
++			} else {
++				_urbd->error_count++;
++			}
++
++			if (_urbd->error_count >= 3)
++			{
++				_urbd->error_count     =0;
++				_ifxhc->wait_for_sof   =0;
++				release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
++			}
++			else
++			{
++				_ifxhc->wait_for_sof   = 1;
++				ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++			}
++		}
++		return 1;
++	}
++	else if(hcint.b.datatglerr )
++	{
++		_urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
++		#if 1
++			if(_ifxhc->data_pid_start == IFXUSB_HC_PID_DATA0)
++				_ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
++			else
++				_ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
++			_ifxhc->wait_for_sof   = 1;
++			_ifxhc->xfer_len       = _urbd->xfer_len - _urbd->urb->actual_length;
++			_ifxhc->xfer_count     = _urbd->urb->actual_length;
++			ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		#else
++			release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR);
++		#endif
++		return 1;
++	}
++	else if(hcint.b.frmovrun   )
++	{
++IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT0 FRMOVRUN [should be Period only]\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++		release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
++		return 1;
++	}
++	else if(hcint.b.nyet   )
++	{
++IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT0 NYET  [should be Out only]\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++	}
++	return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_ctrlbulk_tx_nonsplit(ifxhcd_hcd_t      *_ifxhcd,
++                                        ifxhcd_hc_t       *_ifxhc,
++                                        ifxusb_hc_regs_t  *_hc_regs,
++                                        ifxhcd_urbd_t     *_urbd)
++{
++	hcint_data_t  hcint;
++	hcint_data_t  hcintmsk;
++	hctsiz_data_t hctsiz;
++	int out_nak_enh = 0;
++
++#ifdef __DEBUG__
++static int first=0;
++#endif
++
++	if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
++		out_nak_enh = 1;
++
++	hcint.d32    = ifxusb_rreg(&_hc_regs->hcint);
++	hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++	hctsiz.d32   = ifxusb_rreg(&_hc_regs->hctsiz);
++
++#ifdef __DEBUG__
++if(!first&& _ifxhc->ep_type == IFXUSB_EP_TYPE_BULK
++   &&(hcint.b.stall || hcint.b.datatglerr || hcint.b.frmovrun || hcint.b.bblerr || hcint.b.xacterr) && !hcint.b.ack)
++{
++	showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++	first=1;
++	printk(KERN_INFO "   [%02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X] \n"
++	,*(_ifxhc->xfer_buff+ 0),*(_ifxhc->xfer_buff+ 1),*(_ifxhc->xfer_buff+ 2),*(_ifxhc->xfer_buff+ 3)
++	,*(_ifxhc->xfer_buff+ 4),*(_ifxhc->xfer_buff+ 5),*(_ifxhc->xfer_buff+ 6),*(_ifxhc->xfer_buff+ 7)
++	,*(_ifxhc->xfer_buff+ 8),*(_ifxhc->xfer_buff+ 9),*(_ifxhc->xfer_buff+10),*(_ifxhc->xfer_buff+11)
++	,*(_ifxhc->xfer_buff+12),*(_ifxhc->xfer_buff+13),*(_ifxhc->xfer_buff+14),*(_ifxhc->xfer_buff+15));
++
++	printk(KERN_INFO "   [_urbd->urb->actual_length:%08X _ifxhc->start_pkt_count:%08X hctsiz.b.pktcnt:%08X ,_urbd->xfer_len:%08x] \n"
++	,_urbd->urb->actual_length
++	,_ifxhc->start_pkt_count
++	,hctsiz.b.pktcnt
++	,_urbd->xfer_len);
++}
++#endif
++
++	if(_ifxhc->halt_status == HC_XFER_NAK)
++	{
++		if(_ifxhc->nak_retry_r)
++		{
++			_ifxhc->nak_retry--;
++			if(_ifxhc->nak_retry)
++			{
++				if(_ifxhc->xfer_len!=0)
++					_urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
++				_ifxhc->xfer_len       = _urbd->xfer_len - _urbd->urb->actual_length;
++				_ifxhc->xfer_count     = _urbd->urb->actual_length;
++				_ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++				_ifxhc->wait_for_sof   = 1;
++				_ifxhc->halt_status    = HC_XFER_NO_HALT_STATUS;
++				ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++			}
++			else
++			{
++				_ifxhc->wait_for_sof   = 0;
++				release_channel(_ifxhcd, _ifxhc, _ifxhc->halt_status);
++			}
++		}
++		else
++		{
++			if(_ifxhc->xfer_len!=0)
++				_urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
++			_ifxhc->xfer_len       = _urbd->xfer_len - _urbd->urb->actual_length;
++			_ifxhc->xfer_count     = _urbd->urb->actual_length;
++			_ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++			_ifxhc->wait_for_sof   = 1;
++			_ifxhc->halt_status    = HC_XFER_NO_HALT_STATUS;
++			ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		}
++		return 1;
++	}
++
++	if (hcint.b.xfercomp)
++	{
++		disable_hc_int(_hc_regs,ack);
++		disable_hc_int(_hc_regs,nak);
++		disable_hc_int(_hc_regs,nyet);
++		_urbd->error_count     =0;
++		if(_ifxhc->xfer_len==0 && !hcint.b.ack && hcint.b.nak)
++		{
++			// Walkaround: When sending ZLP and receive NAK but also issue CMPT intr
++			// Solution:   NoSplit: Resend at next SOF
++			//             Split  : Resend at next SOF with SSPLIT
++			if(hcint.b.nyet && !out_nak_enh)
++				_ifxhc->do_ping        = 1;
++			else
++				_ifxhc->do_ping        = 0;
++			_ifxhc->xfer_len       = 0;
++			_ifxhc->xfer_count     = 0;
++			_ifxhc->halt_status    = HC_XFER_NO_HALT_STATUS;
++			_ifxhc->wait_for_sof   = 1;
++			ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		}
++		else
++		{
++			_ifxhc->wait_for_sof   = 0;
++			_ifxhc->do_ping        = 0;
++			complete_channel(_ifxhcd, _ifxhc, _urbd);
++		}
++		return 1;
++	}
++	else if (hcint.b.stall)
++	{
++		disable_hc_int(_hc_regs,ack);
++		disable_hc_int(_hc_regs,nak);
++		disable_hc_int(_hc_regs,nyet);
++		_urbd->error_count     =0;
++		_ifxhc->wait_for_sof   =0;
++		_ifxhc->do_ping        =0;
++
++		// ZLP shortcut
++		#if 1
++		if(hctsiz.b.pktcnt==0)
++			complete_channel(_ifxhcd, _ifxhc, _urbd);
++		else
++		#endif
++		{
++			if(_ifxhc->xfer_len!=0)
++				_urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
++			release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
++		}
++		return 1;
++	}
++	else if (hcint.b.xacterr)
++	{
++		// ZLP shortcut
++		#if 1
++		if(hctsiz.b.pktcnt==0)
++		{
++			disable_hc_int(_hc_regs,ack);
++			disable_hc_int(_hc_regs,nak);
++			disable_hc_int(_hc_regs,nyet);
++			_urbd->error_count     =0;
++			_ifxhc->wait_for_sof   =0;
++			_ifxhc->do_ping        =0;
++			complete_channel(_ifxhcd, _ifxhc, _urbd);
++		}
++		else
++		#endif
++		{
++			if(_ifxhc->xfer_len!=0)
++				_urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
++			_ifxhc->xfer_len       = _urbd->xfer_len - _urbd->urb->actual_length;
++			_ifxhc->xfer_count     = _urbd->urb->actual_length;
++			_ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++
++			if (hcint.b.nak || hcint.b.nyet || hcint.b.ack)
++			{
++				_urbd->error_count     =0;
++				_ifxhc->wait_for_sof   =1;
++				enable_hc_int(_hc_regs,ack);
++				enable_hc_int(_hc_regs,nak);
++				enable_hc_int(_hc_regs,nyet);
++				if(!out_nak_enh)
++					_ifxhc->do_ping        =1;
++				else
++					_ifxhc->do_ping        =0;
++				ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++			}
++			else
++			{
++				_urbd->error_count ++ ;
++				if (_urbd->error_count == 3)
++				{
++					disable_hc_int(_hc_regs,ack);
++					disable_hc_int(_hc_regs,nak);
++					disable_hc_int(_hc_regs,nyet);
++					_urbd->error_count     =0;
++					_ifxhc->wait_for_sof   =0;
++					_ifxhc->do_ping        =0;
++					release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
++				}
++				else
++				{
++					enable_hc_int(_hc_regs,ack);
++					enable_hc_int(_hc_regs,nak);
++					enable_hc_int(_hc_regs,nyet);
++					_ifxhc->wait_for_sof   =1;
++					if(!out_nak_enh)
++						_ifxhc->do_ping        =1;
++					else
++						_ifxhc->do_ping        =0;
++					ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++				}
++			}
++		}
++		return 1;
++	}
++	else if(hcint.b.bblerr     )
++	{
++IFX_WARN("%s() %d Warning CTRLBULK OUT SPLIT0 BABBLE [should be IN only]\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++		_ifxhc->do_ping        = 0;
++		if(_ifxhc->xfer_len!=0)
++			_urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
++		release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
++		return 1;
++	}
++	else if(hcint.b.nak || hcint.b.nyet)
++	{
++		if(!out_nak_enh)
++		{
++			// ZLP shortcut
++			#if 1
++			if(hctsiz.b.pktcnt==0)
++			{
++				_urbd->error_count     =0;
++				_ifxhc->wait_for_sof   =0;
++				_ifxhc->do_ping        =0;
++				complete_channel(_ifxhcd, _ifxhc, _urbd);
++			}
++			else
++			#endif
++			{
++				if(!out_nak_enh)
++					_ifxhc->do_ping        =1;
++				else
++					_ifxhc->do_ping        =0;
++				if(_ifxhc->xfer_len!=0)
++				{
++					_urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
++					_ifxhc->xfer_len           = _urbd->xfer_len - _urbd->urb->actual_length;
++					_ifxhc->xfer_count         = _urbd->urb->actual_length;
++				}
++				_ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++				_ifxhc->wait_for_sof   = 1;
++				ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++			}
++			return 1;
++		}
++	}
++	else if(hcint.b.datatglerr )
++	{
++IFX_WARN("%s() %d Warning CTRLBULK OUT SPLIT0 DATATGLERR [should be IN only]\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++		_urbd->error_count     =0;
++		_ifxhc->wait_for_sof   =0;
++		_ifxhc->do_ping        =0;
++		release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR);
++		return 1;
++	}
++	else if(hcint.b.frmovrun   )
++	{
++IFX_WARN("%s() %d Warning CTRLBULK OUT SPLIT0 FRMOVRUN [should be PERIODIC only]\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++		_urbd->error_count     =0;
++		_ifxhc->wait_for_sof   =0;
++		_ifxhc->do_ping        =0;
++		release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
++		return 1;
++	}
++	return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_intr_rx_nonsplit(ifxhcd_hcd_t      *_ifxhcd,
++                                    ifxhcd_hc_t       *_ifxhc,
++                                    ifxusb_hc_regs_t  *_hc_regs,
++                                    ifxhcd_urbd_t     *_urbd)
++{
++	hcint_data_t  hcint;
++	hcint_data_t  hcintmsk;
++	hctsiz_data_t hctsiz;
++
++	hcint.d32    = ifxusb_rreg(&_hc_regs->hcint);
++	hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++	hctsiz.d32   = ifxusb_rreg(&_hc_regs->hctsiz);
++	disable_hc_int(_hc_regs,ack);
++	disable_hc_int(_hc_regs,nak);
++	disable_hc_int(_hc_regs,nyet);
++	_ifxhc->do_ping        =0;
++
++	if(_ifxhc->halt_status == HC_XFER_NAK)
++	{
++		if(_ifxhc->nak_retry_r)
++		{
++			_ifxhc->nak_retry--;
++			if(_ifxhc->nak_retry)
++			{
++				if(_ifxhc->xfer_len!=0)
++					_urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
++				_ifxhc->xfer_len       = _urbd->xfer_len - _urbd->urb->actual_length;
++				_ifxhc->xfer_count     = _urbd->urb->actual_length;
++				_ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++				_ifxhc->wait_for_sof   = 1;
++				_ifxhc->halt_status    = HC_XFER_NO_HALT_STATUS;
++				ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++			}
++			else
++			{
++				_ifxhc->wait_for_sof   = 0;
++				release_channel(_ifxhcd, _ifxhc, _ifxhc->halt_status);
++			}
++		}
++		else
++		{
++			if(_ifxhc->xfer_len!=0)
++				_urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
++			_ifxhc->xfer_len       = _urbd->xfer_len - _urbd->urb->actual_length;
++			_ifxhc->xfer_count     = _urbd->urb->actual_length;
++			_ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++			_ifxhc->wait_for_sof   = 1;
++			_ifxhc->halt_status    = HC_XFER_NO_HALT_STATUS;
++			ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		}
++		return 1;
++	}
++
++	if(hcint.b.xfercomp   )
++	{
++		_urbd->error_count   =0;
++		//restart INTR immediately
++		#if 1
++		if(hctsiz.b.pktcnt>0)
++		{
++			// TODO Re-initialize Channel (in next b_interval - 1 uF/F)
++			_ifxhc->wait_for_sof   = _ifxhc->epqh->interval-1;
++			if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++			ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		}
++		else
++		#endif
++		{
++			_ifxhc->wait_for_sof =0;
++			complete_channel(_ifxhcd, _ifxhc, _urbd);
++		}
++		return 1;
++	}
++	else if (hcint.b.stall)
++	{
++		_urbd->error_count   =0;
++		_ifxhc->wait_for_sof =0;
++
++		// Don't care shortcut
++		#if 0
++		if(hctsiz.b.pktcnt==0)
++			complete_channel(_ifxhcd, _ifxhc, _urbd);
++		else
++		#endif
++		{
++			// Stall FIFO compensation.
++			#if 0
++				int sz1,sz2;
++				sz2=_ifxhc->start_pkt_count - hctsiz.b.pktcnt;
++				sz2*=_ifxhc->mps;
++				sz1=_ifxhc->xfer_len - hctsiz.b.xfersize;
++				sz2-=sz1;
++				if(sz2)
++					ifxhcd_hc_dumb_rx(&_ifxhcd->core_if, _ifxhc,_ifxhc->epqh->dump_buf);
++			#endif
++			_urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
++			release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
++		}
++		return 1;
++	}
++
++
++	else if (hcint.b.bblerr)
++	{
++		_urbd->error_count   =0;
++		_ifxhc->wait_for_sof =0;
++
++		// Don't care shortcut
++		#if 0
++		if(hctsiz.b.pktcnt==0)
++			complete_channel(_ifxhcd, _ifxhc, _urbd);
++		else
++		#endif
++		{
++			_urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
++			release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
++		}
++		return 1;
++	}
++	else if (hcint.b.nak || hcint.b.datatglerr || hcint.b.frmovrun)
++	{
++		_urbd->error_count   =0;
++		//restart INTR immediately
++		#if 1
++		if(hctsiz.b.pktcnt>0)
++		{
++			// TODO Re-initialize Channel (in next b_interval - 1 uF/F)
++			_ifxhc->wait_for_sof   = _ifxhc->epqh->interval-1;
++			if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++			ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		}
++		else
++		#endif
++		{
++			_ifxhc->wait_for_sof =0;
++			complete_channel(_ifxhcd, _ifxhc, _urbd);
++		}
++		return 1;
++	}
++	else if (hcint.b.xacterr)
++	{
++		// ZLP shortcut
++		#if 1
++		if(hctsiz.b.pktcnt==0)
++		{
++			_urbd->error_count     =0;
++			_ifxhc->wait_for_sof   =0;
++			complete_channel(_ifxhcd, _ifxhc, _urbd);
++		}
++		else
++		#endif
++		{
++			/* 20110803 AVM/WK FIX: Reset error count on any handshake */
++			if (hcint.b.nak || hcint.b.nyet || hcint.b.ack) {
++				_urbd->error_count = 1;
++			} else {
++				_urbd->error_count++;
++			}
++
++			if(_urbd->error_count>=3)
++			{
++				_urbd->error_count     =0;
++				_ifxhc->wait_for_sof   =0;
++				release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
++			}
++			else
++			{
++				_ifxhc->wait_for_sof   = _ifxhc->epqh->interval-1;
++				ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++			}
++		}
++		return 1;
++	}
++	else if(hcint.b.nyet   )
++	{
++IFX_WARN("%s() %d Warning INTR IN SPLIT0 NYET [should be OUT only]\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++		return 1;
++	}
++	return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_intr_tx_nonsplit(ifxhcd_hcd_t      *_ifxhcd,
++                                    ifxhcd_hc_t       *_ifxhc,
++                                    ifxusb_hc_regs_t  *_hc_regs,
++                                    ifxhcd_urbd_t     *_urbd)
++{
++	hcint_data_t  hcint;
++	hcint_data_t  hcintmsk;
++	hctsiz_data_t hctsiz;
++	int out_nak_enh = 0;
++
++	if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
++		out_nak_enh = 1;
++
++	hcint.d32    = ifxusb_rreg(&_hc_regs->hcint);
++	hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++	hctsiz.d32   = ifxusb_rreg(&_hc_regs->hctsiz);
++
++	if(_ifxhc->halt_status == HC_XFER_NAK)
++	{
++		if(_ifxhc->nak_retry_r)
++		{
++			_ifxhc->nak_retry--;
++			if(_ifxhc->nak_retry)
++			{
++				if(_ifxhc->xfer_len!=0)
++					_urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
++				_ifxhc->xfer_len       = _urbd->xfer_len - _urbd->urb->actual_length;
++				_ifxhc->xfer_count     = _urbd->urb->actual_length;
++				_ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++				_ifxhc->wait_for_sof   = 1;
++				_ifxhc->halt_status    = HC_XFER_NO_HALT_STATUS;
++				ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++			}
++			else
++			{
++				_ifxhc->wait_for_sof   = 0;
++				release_channel(_ifxhcd, _ifxhc, _ifxhc->halt_status);
++			}
++		}
++		else
++		{
++			if(_ifxhc->xfer_len!=0)
++				_urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
++			_ifxhc->xfer_len       = _urbd->xfer_len - _urbd->urb->actual_length;
++			_ifxhc->xfer_count     = _urbd->urb->actual_length;
++			_ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++			_ifxhc->wait_for_sof   = 1;
++			_ifxhc->halt_status    = HC_XFER_NO_HALT_STATUS;
++			ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		}
++		return 1;
++	}
++
++	if(hcint.b.xfercomp   )
++	{
++		disable_hc_int(_hc_regs,ack);
++		disable_hc_int(_hc_regs,nak);
++		disable_hc_int(_hc_regs,nyet);
++		_urbd->error_count   =0;
++		//restart INTR immediately
++		#if 0
++		if(hctsiz.b.pktcnt>0)
++		{
++			// TODO Re-initialize Channel (in next b_interval - 1 uF/F)
++			_ifxhc->wait_for_sof   = _ifxhc->epqh->interval-1;
++			if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++			if(hcint.b.nyet && !out_nak_enh  )
++				_ifxhc->do_ping        =1;
++			else
++				_ifxhc->do_ping        =0;
++			ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		}
++		else
++		#endif
++		{
++			_ifxhc->wait_for_sof =0;
++			_ifxhc->do_ping      =0;
++			complete_channel(_ifxhcd, _ifxhc, _urbd);
++		}
++		return 1;
++	}
++	else if (hcint.b.stall)
++	{
++		disable_hc_int(_hc_regs,ack);
++		disable_hc_int(_hc_regs,nyet);
++		disable_hc_int(_hc_regs,nak);
++		_urbd->error_count   =0;
++		_ifxhc->wait_for_sof =0;
++		_ifxhc->do_ping      =0;
++
++		// Don't care shortcut
++		#if 0
++		if(hctsiz.b.pktcnt==0)
++			complete_channel(_ifxhcd, _ifxhc, _urbd);
++		else
++		#endif
++		{
++			if(_ifxhc->xfer_len!=0)// !_ifxhc->is_in
++				_urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
++			release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
++		}
++		return 1;
++	}
++	else if(hcint.b.nak || hcint.b.frmovrun )
++	{
++		disable_hc_int(_hc_regs,ack);
++		disable_hc_int(_hc_regs,nyet);
++		disable_hc_int(_hc_regs,nak);
++		_urbd->error_count   =0;
++		//restart INTR immediately
++		#if 0
++		if(hctsiz.b.pktcnt>0)
++		{
++			// TODO Re-initialize Channel (in next b_interval - 1 uF/F)
++			_ifxhc->wait_for_sof   = _ifxhc->epqh->interval-1;
++			if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++			if(!out_nak_enh  )
++				_ifxhc->do_ping        =1;
++			else
++				_ifxhc->do_ping        =0;
++			ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		}
++		else
++		#endif
++		{
++			_ifxhc->wait_for_sof =0;
++			_ifxhc->do_ping      =0;
++			complete_channel(_ifxhcd, _ifxhc, _urbd);
++		}
++		return 1;
++	}
++	else if(hcint.b.xacterr    )
++	{
++		// ZLP shortcut
++		#if 1
++		if(hctsiz.b.pktcnt==0)
++		{
++			_urbd->error_count     =0;
++			_ifxhc->wait_for_sof   =0;
++			_ifxhc->do_ping        =0;
++			complete_channel(_ifxhcd, _ifxhc, _urbd);
++		}
++		else
++		#endif
++		{
++			/* 20110803 AVM/WK FIX: Reset error count on any handshake */
++			if (hcint.b.nak || hcint.b.nyet || hcint.b.ack) {
++				_urbd->error_count = 1;
++			} else {
++				_urbd->error_count++;
++			}
++
++			if(_urbd->error_count>=3)
++			{
++				_urbd->error_count     =0;
++				_ifxhc->wait_for_sof   =0;
++				_ifxhc->do_ping        =0;
++				release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
++			}
++			else
++			{
++				//_ifxhc->wait_for_sof   = _ifxhc->epqh->interval-1;
++				//if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++				_ifxhc->wait_for_sof=1;
++				if(!out_nak_enh  )
++					_ifxhc->do_ping        =1;
++				else
++					_ifxhc->do_ping        =0;
++
++				ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++			}
++		}
++		return 1;
++	}
++	else if(hcint.b.bblerr     )
++	{
++IFX_WARN("%s() %d Warning INTR OUT SPLIT0 BABBLEERR  [should be IN only]\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++		_urbd->error_count     =0;
++		_ifxhc->wait_for_sof   =0;
++		_ifxhc->do_ping        =0;
++		release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
++		return 1;
++	}
++	else if(hcint.b.datatglerr )
++	{
++IFX_WARN("%s() %d Warning INTR OUT SPLIT0 DATATGLERR\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++		_urbd->error_count     =0;
++		_ifxhc->wait_for_sof   =0;
++		_ifxhc->do_ping        =0;
++		release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR);
++		return 1;
++	}
++	return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_isoc_rx_nonsplit(ifxhcd_hcd_t      *_ifxhcd,
++                                    ifxhcd_hc_t       *_ifxhc,
++                                    ifxusb_hc_regs_t  *_hc_regs,
++                                    ifxhcd_urbd_t     *_urbd)
++{
++	#if defined(__EN_ISOC__)
++		hcint_data_t  hcint;
++		hcint_data_t  hcintmsk;
++		hctsiz_data_t hctsiz;
++
++		hcint.d32    = ifxusb_rreg(&_hc_regs->hcint);
++		hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++		hctsiz.d32   = ifxusb_rreg(&_hc_regs->hctsiz);
++
++		if (hcint.b.xfercomp || hcint.b.frmovrun)
++		{
++			_urbd->error_count=0;
++			disable_hc_int(_hc_regs,ack);
++			disable_hc_int(_hc_regs,nak);
++			disable_hc_int(_hc_regs,nyet);
++			_ifxhc->wait_for_sof   = 0;
++			if (hcint.b.xfercomp)
++				complete_channel(_ifxhcd, _ifxhc, _urbd);
++			else
++				release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
++		}
++		else if (hcint.b.xacterr || hcint.b.bblerr)
++		{
++			#ifndef VR9Skip
++				if(hctsiz.b.pktcnt==0)
++				{
++					complete_channel(_ifxhcd, _ifxhc, _urbd);
++				}
++				else
++				{
++					int sz1,sz2;
++					sz2=_ifxhc->start_pkt_count - hctsiz.b.pktcnt;
++					sz2*=_ifxhc->mps;
++					sz1=_ifxhc->xfer_len - hctsiz.b.xfersize;
++					sz2-=sz1;
++					if(sz2)
++						ifxhcd_hc_dumb_rx(&_ifxhcd->core_if, _ifxhc,_ifxhc->epqh->dump_buf);
++					_urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
++					_ifxhc->xfer_len           = _urbd->xfer_len - _urbd->urb->actual_length;
++					_ifxhc->xfer_count         = _urbd->urb->actual_length;
++					_ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++					_urbd->error_count++;
++					if(_urbd->error_count>=3)
++					{
++						_urbd->error_count=0;
++						_ifxhc->wait_for_sof   = 0;
++						release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
++						release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
++					}
++					else
++					{
++						_ifxhc->wait_for_sof   = 1;
++						enable_hc_int(_hc_regs,ack);
++						enable_hc_int(_hc_regs,nak);
++						enable_hc_int(_hc_regs,nyet);
++						ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++					}
++				}
++			#endif
++		}
++		else if(hcint.b.datatglerr )
++		{
++			warning
++		}
++		else if(hcint.b.stall      )
++		{
++			warning
++		}
++	#else
++	#endif
++	return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_isoc_tx_nonsplit(ifxhcd_hcd_t      *_ifxhcd,
++                                    ifxhcd_hc_t       *_ifxhc,
++                                    ifxusb_hc_regs_t  *_hc_regs,
++                                    ifxhcd_urbd_t     *_urbd)
++{
++	#if defined(__EN_ISOC__)
++		hcint_data_t  hcint;
++		hcint_data_t  hcintmsk;
++		hctsiz_data_t hctsiz;
++		int out_nak_enh = 0;
++
++		if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
++			out_nak_enh = 1;
++
++		hcint.d32    = ifxusb_rreg(&_hc_regs->hcint);
++		hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++		hctsiz.d32   = ifxusb_rreg(&_hc_regs->hctsiz);
++
++		if (hcint.b.xfercomp)
++		{
++			_urbd->error_count=0;
++			disable_hc_int(_hc_regs,ack);
++			disable_hc_int(_hc_regs,nak);
++			disable_hc_int(_hc_regs,nyet);
++			_ifxhc->wait_for_sof   = 0;
++			complete_channel(_ifxhcd, _ifxhc, _urbd);
++			return 1;
++		}
++		else if (hcint.b.frmovrun)
++		{
++			#ifndef VR9Skip
++				_urbd->error_count=0;
++				disable_hc_int(_hc_regs,ack);
++				disable_hc_int(_hc_regs,nak);
++				disable_hc_int(_hc_regs,nyet);
++				_ifxhc->wait_for_sof   = 0;
++				release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
++			#endif
++		}
++		else if(hcint.b.datatglerr )
++		{
++			warning
++		}
++		else if(hcint.b.bblerr     )
++		{
++			#ifndef VR9Skip
++				if(hctsiz.b.pktcnt==0)
++				{
++					complete_channel(_ifxhcd, _ifxhc, _urbd);
++				}
++				else
++				{
++					int sz1,sz2;
++					sz2=_ifxhc->start_pkt_count - hctsiz.b.pktcnt;
++					sz2*=_ifxhc->mps;
++					sz1=_ifxhc->xfer_len - hctsiz.b.xfersize;
++					sz2-=sz1;
++						if(sz2)
++							ifxhcd_hc_dumb_rx(&_ifxhcd->core_if, _ifxhc,_ifxhc->epqh->dump_buf);
++						_urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
++					_ifxhc->xfer_len           = _urbd->xfer_len - _urbd->urb->actual_length;
++					_ifxhc->xfer_count         = _urbd->urb->actual_length;
++					_ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++					_urbd->error_count++;
++					if(_urbd->error_count>=3)
++					{
++						_urbd->error_count=0;
++						_ifxhc->wait_for_sof   = 0;
++						release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
++					}
++					else
++					{
++						_ifxhc->wait_for_sof   = 1;
++						enable_hc_int(_hc_regs,ack);
++						enable_hc_int(_hc_regs,nak);
++						enable_hc_int(_hc_regs,nyet);
++						ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++					}
++				}
++			#endif
++		}
++		else if(hcint.b.xacterr    )
++		{
++			if(hctsiz.b.pktcnt==0)
++			{
++				complete_channel(_ifxhcd, _ifxhc, _urbd);
++				return 1;
++			}
++			_urbd->error_count++;
++			if(_urbd->error_count>=3)
++			{
++				_urbd->error_count=0;
++				_ifxhc->wait_for_sof   = 0;
++				release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
++			}
++			else
++			{
++				_ifxhc->wait_for_sof   = 1;
++				ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++			}
++			return 1;
++		}
++		else if(hcint.b.stall      )
++		{
++				warning
++		}
++	#else
++	#endif
++	return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_ctrlbulk_rx_ssplit(ifxhcd_hcd_t      *_ifxhcd,
++                                      ifxhcd_hc_t       *_ifxhc,
++                                      ifxusb_hc_regs_t  *_hc_regs,
++                                      ifxhcd_urbd_t     *_urbd)
++{
++	hcint_data_t  hcint;
++	hcint_data_t  hcintmsk;
++	hctsiz_data_t hctsiz;
++
++	hcint.d32    = ifxusb_rreg(&_hc_regs->hcint);
++	hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++	hctsiz.d32   = ifxusb_rreg(&_hc_regs->hctsiz);
++
++	disable_hc_int(_hc_regs,ack);
++	disable_hc_int(_hc_regs,nak);
++	disable_hc_int(_hc_regs,nyet);
++
++	_ifxhc->do_ping        =0;
++
++	if (hcint.b.ack)
++	{
++		_urbd->error_count=0;
++		_ifxhc->split=2;
++		_ifxhc->wait_for_sof   = 8;
++		_ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++		ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		return 1;
++	}
++	else if (hcint.b.nak)
++	{
++		_ifxhc->wait_for_sof   = 1;
++		_urbd->error_count     = 0;
++		ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		return 1;
++	}
++	else if (hcint.b.xacterr)
++	{
++		_urbd->error_count++;
++		if(_urbd->error_count>=3)
++		{
++			_urbd->error_count=0;
++			_ifxhc->wait_for_sof =0;
++			release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
++		}
++		else
++		{
++			_ifxhc->wait_for_sof =1;
++			ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		}
++		return 1;
++	}
++	else if(hcint.b.bblerr     )
++	{
++		_urbd->error_count   =0;
++		_ifxhc->wait_for_sof =0;
++		release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
++		return 1;
++	}
++	else if(hcint.b.stall      )
++	{
++		_urbd->error_count   =0;
++		_ifxhc->wait_for_sof =0;
++		release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
++		return 1;
++	}
++	else if(hcint.b.datatglerr )
++	{
++IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT1 HC_XFER_DATA_TOGGLE_ERR\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++		_urbd->error_count   =0;
++		_ifxhc->wait_for_sof =0;
++		release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR);
++		return 1;
++	}
++	else if(hcint.b.frmovrun   )
++	{
++IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT1 HC_XFER_FRAME_OVERRUN\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++		_urbd->error_count   =0;
++		_ifxhc->wait_for_sof =0;
++		release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
++		return 1;
++	}
++	else if(hcint.b.nyet   )
++	{
++IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT1 NYET\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++	}
++	else if(hcint.b.xfercomp   )
++	{
++IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT1 COMPLETE\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++	}
++	return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_ctrlbulk_tx_ssplit(ifxhcd_hcd_t      *_ifxhcd,
++                                      ifxhcd_hc_t       *_ifxhc,
++                                      ifxusb_hc_regs_t  *_hc_regs,
++                                      ifxhcd_urbd_t     *_urbd)
++{
++	hcint_data_t  hcint;
++	hcint_data_t  hcintmsk;
++	hctsiz_data_t hctsiz;
++	int out_nak_enh = 0;
++
++#ifdef __DEBUG__
++static int first=0;
++#endif
++
++	if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
++		out_nak_enh = 1;
++
++	hcint.d32    = ifxusb_rreg(&_hc_regs->hcint);
++	hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++	hctsiz.d32   = ifxusb_rreg(&_hc_regs->hctsiz);
++	disable_hc_int(_hc_regs,ack);
++	disable_hc_int(_hc_regs,nak);
++	disable_hc_int(_hc_regs,nyet);
++
++#ifdef __DEBUG__
++	if(!first&& _ifxhc->ep_type == IFXUSB_EP_TYPE_BULK
++	   &&(hcint.b.stall || hcint.b.datatglerr || hcint.b.frmovrun || hcint.b.bblerr || hcint.b.xacterr) && !hcint.b.ack)
++	{
++		showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++		first=1;
++		printk(KERN_INFO "   [%02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X] \n"
++		,*(_ifxhc->xfer_buff+ 0),*(_ifxhc->xfer_buff+ 1),*(_ifxhc->xfer_buff+ 2),*(_ifxhc->xfer_buff+ 3)
++		,*(_ifxhc->xfer_buff+ 4),*(_ifxhc->xfer_buff+ 5),*(_ifxhc->xfer_buff+ 6),*(_ifxhc->xfer_buff+ 7)
++		,*(_ifxhc->xfer_buff+ 8),*(_ifxhc->xfer_buff+ 9),*(_ifxhc->xfer_buff+10),*(_ifxhc->xfer_buff+11)
++		,*(_ifxhc->xfer_buff+12),*(_ifxhc->xfer_buff+13),*(_ifxhc->xfer_buff+14),*(_ifxhc->xfer_buff+15));
++
++		printk(KERN_INFO "   [_urbd->urb->actual_length:%08X _ifxhc->start_pkt_count:%08X hctsiz.b.pktcnt:%08X ,_urbd->xfer_len:%08x] \n"
++		,_urbd->urb->actual_length
++		,_ifxhc->start_pkt_count
++		,hctsiz.b.pktcnt
++		,_urbd->xfer_len);
++	}
++#endif
++
++	if     (hcint.b.ack )
++	{
++		_urbd->error_count=0;
++		if (_ifxhc->ep_type == IFXUSB_EP_TYPE_BULK || _ifxhc->control_phase != IFXHCD_CONTROL_SETUP)
++			_ifxhc->ssplit_out_xfer_count = _ifxhc->xfer_len;
++		_ifxhc->split=2;
++		_ifxhc->wait_for_sof   =8;
++		_ifxhc->data_pid_start =read_data_toggle(_hc_regs);
++		ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		return 1;
++	}
++	else if(hcint.b.nyet)
++	{
++IFX_WARN("%s() %d Warning CTRLBULK OUT SPLIT1 NYET\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++		_urbd->error_count=0;
++		if (_ifxhc->ep_type == IFXUSB_EP_TYPE_BULK || _ifxhc->control_phase != IFXHCD_CONTROL_SETUP)
++			_ifxhc->ssplit_out_xfer_count = _ifxhc->xfer_len;
++		_ifxhc->split=2;
++		_ifxhc->wait_for_sof   =1;
++		_ifxhc->data_pid_start =read_data_toggle(_hc_regs);
++		ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		return 1;
++	}
++	else if(hcint.b.nak        )
++	{
++		_ifxhc->wait_for_sof  =1;
++		if(!out_nak_enh  )
++			_ifxhc->do_ping        =1;
++		else
++			_ifxhc->do_ping        =0;
++		_urbd->error_count    =0;
++		ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		return 1;
++	}
++	else if(hcint.b.xacterr    )
++	{
++		_urbd->error_count++;
++		if(_urbd->error_count>=3)
++		{
++			_urbd->error_count=0;
++			_ifxhc->wait_for_sof  =0;
++			_ifxhc->do_ping       =0;
++			release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
++		}
++		else
++		{
++			_ifxhc->wait_for_sof  =1;
++			_ifxhc->do_ping       =1;
++			ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		}
++		return 1;
++	}
++	else if(hcint.b.datatglerr )
++	{
++		_urbd->error_count   =0;
++		_ifxhc->wait_for_sof =0;
++		_ifxhc->do_ping      =0;
++		release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR);
++		return 1;
++	}
++	else if(hcint.b.bblerr     )
++	{
++		_urbd->error_count   =0;
++		_ifxhc->wait_for_sof =0;
++		_ifxhc->do_ping      =0;
++		release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
++		return 1;
++	}
++	else if(hcint.b.stall      )
++	{
++		_urbd->error_count   =0;
++		_ifxhc->wait_for_sof =0;
++		_ifxhc->do_ping      =0;
++		release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
++		return 1;
++	}
++	else if(hcint.b.frmovrun   )
++	{
++IFX_WARN("%s() %d Warning CTRLBULK OUT SPLIT1 HC_XFER_FRAME_OVERRUN\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++		_urbd->error_count   =0;
++		_ifxhc->wait_for_sof =0;
++		_ifxhc->do_ping      =0;
++		release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
++		return 1;
++	}
++	else if(hcint.b.xfercomp   )
++	{
++		printk(KERN_INFO "%s() %d Warning CTRLBULK OUT SPLIT1 COMPLETE\n",__func__,__LINE__);
++	}
++	return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_intr_rx_ssplit(ifxhcd_hcd_t      *_ifxhcd,
++                                  ifxhcd_hc_t       *_ifxhc,
++                                  ifxusb_hc_regs_t  *_hc_regs,
++                                  ifxhcd_urbd_t     *_urbd)
++{
++	hcint_data_t  hcint;
++	hcint_data_t  hcintmsk;
++	hctsiz_data_t hctsiz;
++
++	hcint.d32    = ifxusb_rreg(&_hc_regs->hcint);
++	hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++	hctsiz.d32   = ifxusb_rreg(&_hc_regs->hctsiz);
++
++	disable_hc_int(_hc_regs,ack);
++	disable_hc_int(_hc_regs,nak);
++	disable_hc_int(_hc_regs,nyet);
++
++	_ifxhc->do_ping        =0;
++
++	if     (hcint.b.ack )
++	{
++		/*== AVM/BC 20100701 - Workaround FullSpeed Interrupts with HiSpeed Hub ==*/
++		_ifxhc->nyet_count=0;
++
++		_urbd->error_count=0;
++		_ifxhc->split=2;
++		_ifxhc->wait_for_sof   = 0;
++		_ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++		ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		return 1;
++	}
++	else if(hcint.b.nak        )
++	{
++		_ifxhc->wait_for_sof   = _ifxhc->epqh->interval-1;
++		if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++		_urbd->error_count=0;
++		ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		return 1;
++	}
++	else if(hcint.b.xacterr    )
++	{
++		hcchar_data_t 	hcchar;
++		hcchar.d32 = ifxusb_rreg(&_hc_regs->hcchar);
++		_urbd->error_count=hcchar.b.multicnt;
++		if(_urbd->error_count>=3)
++		{
++			_urbd->error_count=0;
++			_ifxhc->wait_for_sof   = 0;
++			release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
++		}
++		else
++		{
++			_ifxhc->wait_for_sof   = _ifxhc->epqh->interval-1;
++			if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++			ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		}
++		return 1;
++	}
++	else if(hcint.b.stall      )
++	{
++		_urbd->error_count   =0;
++		_ifxhc->wait_for_sof =0;
++		release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
++		return 1;
++	}
++	else if(hcint.b.bblerr     )
++	{
++		_urbd->error_count   =0;
++		_ifxhc->wait_for_sof =0;
++		release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
++		return 1;
++	}
++	else if(hcint.b.frmovrun   )
++	{
++		_ifxhc->wait_for_sof   = _ifxhc->epqh->interval-1;
++		if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++		ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		return 1;
++	}
++	else if(hcint.b.datatglerr )
++	{
++IFX_WARN( "%s() %d Warning INTR IN SPLIT1 DATATGLERR\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++		_urbd->error_count   =0;
++		_ifxhc->wait_for_sof =0;
++		release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR);
++		return 1;
++	}
++	else if(hcint.b.xfercomp   )
++	{
++IFX_WARN("%s() %d Warning INTR IN SPLIT1 COMPLETE\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++	}
++	return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_intr_tx_ssplit(ifxhcd_hcd_t      *_ifxhcd,
++                                  ifxhcd_hc_t       *_ifxhc,
++                                  ifxusb_hc_regs_t  *_hc_regs,
++                                  ifxhcd_urbd_t     *_urbd)
++{
++	hcint_data_t  hcint;
++	hcint_data_t  hcintmsk;
++	hctsiz_data_t hctsiz;
++	int out_nak_enh = 0;
++
++	if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
++		out_nak_enh = 1;
++
++	hcint.d32    = ifxusb_rreg(&_hc_regs->hcint);
++	hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++	hctsiz.d32   = ifxusb_rreg(&_hc_regs->hctsiz);
++
++	disable_hc_int(_hc_regs,ack);
++	disable_hc_int(_hc_regs,nak);
++	disable_hc_int(_hc_regs,nyet);
++
++	if     (hcint.b.ack )
++	{
++		/*== AVM/BC 20100701 - Workaround FullSpeed Interrupts with HiSpeed Hub ==*/
++		_ifxhc->nyet_count=0;
++
++		_urbd->error_count=0;
++		_ifxhc->ssplit_out_xfer_count = _ifxhc->xfer_len;
++		_ifxhc->split=2;
++		_ifxhc->wait_for_sof   = 0;
++		_ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++		ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		return 1;
++	}
++	else if(hcint.b.nyet)
++	{
++IFX_WARN("%s() %d Warning INTR OUT SPLIT1 NYET\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++		_urbd->error_count=0;
++		_ifxhc->ssplit_out_xfer_count = _ifxhc->xfer_len;
++		_ifxhc->split=2;
++		_ifxhc->wait_for_sof   = 0;
++		_ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++		ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		return 1;
++	}
++	else if(hcint.b.nak        )
++	{
++		_ifxhc->wait_for_sof   = _ifxhc->epqh->interval-1;
++		if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++		_urbd->error_count   =0;
++		ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		return 1;
++	}
++	else if(hcint.b.frmovrun   )
++	{
++		_urbd->error_count   =0;
++		_ifxhc->wait_for_sof   = _ifxhc->epqh->interval-1;
++		if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++		ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		return 1;
++	}
++	else if(hcint.b.xacterr    )
++	{
++		hcchar_data_t 	hcchar;
++		hcchar.d32 = ifxusb_rreg(&_hc_regs->hcchar);
++		_urbd->error_count=hcchar.b.multicnt;
++		if(_urbd->error_count>=3)
++		{
++			_urbd->error_count=0;
++			_ifxhc->wait_for_sof =0;
++			release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
++		}
++		else
++		{
++			enable_hc_int(_hc_regs,ack);
++			enable_hc_int(_hc_regs,nak);
++			enable_hc_int(_hc_regs,nyet);
++			_ifxhc->wait_for_sof   = _ifxhc->epqh->interval-1;
++			if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++			ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		}
++		return 1;
++	}
++	else if(hcint.b.datatglerr )
++	{
++IFX_WARN("%s() %d Warning INTR IN SPLIT1 DATATGLERR\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++		_urbd->error_count   =0;
++		_ifxhc->wait_for_sof =0;
++		release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR);
++		return 1;
++	}
++	else if(hcint.b.bblerr     )
++	{
++IFX_WARN("%s() %d Warning INTR IN SPLIT1 BABBLEERR\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++		_urbd->error_count   =0;
++		_ifxhc->wait_for_sof =0;
++		release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
++		return 1;
++	}
++	else if(hcint.b.stall      )
++	{
++IFX_WARN("%s() %d Warning INTR IN SPLIT1 STALL\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++		_urbd->error_count   =0;
++		_ifxhc->wait_for_sof =0;
++		release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
++		return 1;
++	}
++	else if(hcint.b.xfercomp   )
++	{
++IFX_WARN("%s() %d Warning INTR IN SPLIT1 COMPLETE\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++	}
++	return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_isoc_rx_ssplit(ifxhcd_hcd_t      *_ifxhcd,
++                                   ifxhcd_hc_t       *_ifxhc,
++                                   ifxusb_hc_regs_t  *_hc_regs,
++                                   ifxhcd_urbd_t     *_urbd)
++{
++	#if defined(__EN_ISOC__) && defined(__EN_ISOC_SPLIT__)
++		hcint_data_t  hcint;
++		hcint_data_t  hcintmsk;
++		hctsiz_data_t hctsiz;
++
++		hcint.d32    = ifxusb_rreg(&_hc_regs->hcint);
++		hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++		hctsiz.d32   = ifxusb_rreg(&_hc_regs->hctsiz);
++		if     (hcint.b.ack )
++		{
++			Do Complete Split
++		}
++		else if(hcint.b.frmovrun   )
++		{
++			Rewind Buffer Pointers
++			Retry Start Split (in next b_interval ¡V 1 uF)
++		}
++		else if(hcint.b.datatglerr )
++		{
++			warning
++		}
++		else if(hcint.b.bblerr     )
++		{
++			warning
++		}
++		else if(hcint.b.xacterr    )
++		{
++			warning
++		}
++		else if(hcint.b.stall      )
++		{
++			warning
++		}
++		else if(hcint.b.nak        )
++		{
++			warning
++		}
++		else if(hcint.b.xfercomp   )
++		{
++			warning
++		}
++		else if(hcint.b.nyet)
++		{
++			warning
++		}
++	#endif
++	return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_isoc_tx_ssplit(ifxhcd_hcd_t      *_ifxhcd,
++                                   ifxhcd_hc_t       *_ifxhc,
++                                   ifxusb_hc_regs_t  *_hc_regs,
++                                   ifxhcd_urbd_t     *_urbd)
++{
++	#if defined(__EN_ISOC__) && defined(__EN_ISOC_SPLIT__)
++		hcint_data_t  hcint;
++		hcint_data_t  hcintmsk;
++		hctsiz_data_t hctsiz;
++		int out_nak_enh = 0;
++
++		if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
++			out_nak_enh = 1;
++
++		hcint.d32    = ifxusb_rreg(&_hc_regs->hcint);
++		hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++		hctsiz.d32   = ifxusb_rreg(&_hc_regs->hctsiz);
++		if     (hcint.b.ack )
++		{
++			Do Next Start Split (in next b_interval ¡V 1 uF)
++		}
++		else if(hcint.b.frmovrun   )
++		{
++			Do Next Transaction in next frame.
++		}
++		else if(hcint.b.datatglerr )
++		{
++			warning
++		}
++		else if(hcint.b.bblerr     )
++		{
++			warning
++		}
++		else if(hcint.b.xacterr    )
++		{
++			warning
++		}
++		else if(hcint.b.stall      )
++		{
++			warning
++		}
++		else if(hcint.b.nak        )
++		{
++			warning
++		}
++		else if(hcint.b.xfercomp   )
++		{
++			warning
++		}
++		else if(hcint.b.nyet)
++		{
++			warning
++		}
++	#endif
++	return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_ctrlbulk_rx_csplit(ifxhcd_hcd_t      *_ifxhcd,
++                                      ifxhcd_hc_t       *_ifxhc,
++                                      ifxusb_hc_regs_t  *_hc_regs,
++                                      ifxhcd_urbd_t     *_urbd)
++{
++	hcint_data_t  hcint;
++	hcint_data_t  hcintmsk;
++	hctsiz_data_t hctsiz;
++
++	hcint.d32    = ifxusb_rreg(&_hc_regs->hcint);
++	hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++	hctsiz.d32   = ifxusb_rreg(&_hc_regs->hctsiz);
++	disable_hc_int(_hc_regs,ack);
++	disable_hc_int(_hc_regs,nak);
++	disable_hc_int(_hc_regs,nyet);
++
++	_ifxhc->do_ping        = 0;
++
++	if (hcint.b.xfercomp)
++	{
++		_urbd->error_count   =0;
++		_ifxhc->wait_for_sof = 0;
++		_ifxhc->split=1;
++		complete_channel(_ifxhcd, _ifxhc, _urbd);
++		return 1;
++	}
++	else if (hcint.b.nak)
++	{
++		_urbd->error_count=0;
++
++		_ifxhc->split          = 1;
++		_ifxhc->wait_for_sof   = 1;
++		_ifxhc->xfer_len       = _urbd->xfer_len - _urbd->urb->actual_length;
++		_ifxhc->xfer_count     = _urbd->urb->actual_length;
++		ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		return 1;
++	}
++	else if(hcint.b.nyet)
++	{
++		_urbd->error_count=0;
++		_ifxhc->halt_status    = HC_XFER_NO_HALT_STATUS;
++		_ifxhc->wait_for_sof   = 1;
++		ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		return 1;
++	}
++	else if(hcint.b.stall || hcint.b.bblerr )
++	{
++		_urbd->error_count=0;
++		_ifxhc->wait_for_sof   = 0;
++		if     (hcint.b.stall)
++			release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
++		else if(hcint.b.bblerr )
++			release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
++		return 1;
++	}
++	else if(hcint.b.xacterr    )
++	{
++		_urbd->error_count++;
++		if(_urbd->error_count>=3)
++		{
++			_urbd->error_count=0;
++			_ifxhc->wait_for_sof   = 0;
++			release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
++		}
++		else
++		{
++			_ifxhc->split=1;
++			_ifxhc->wait_for_sof   = 1;
++			_ifxhc->xfer_len       = _urbd->xfer_len - _urbd->urb->actual_length;
++			_ifxhc->xfer_count     = _urbd->urb->actual_length;
++			ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		}
++		return 1;
++	}
++	else if(hcint.b.datatglerr )
++	{
++		if(_ifxhc->data_pid_start == IFXUSB_HC_PID_DATA0)
++			_ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
++		else
++			_ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
++		_ifxhc->split=1;
++		_ifxhc->wait_for_sof   = 1;
++		_ifxhc->xfer_len       = _urbd->xfer_len - _urbd->urb->actual_length;
++		_ifxhc->xfer_count     = _urbd->urb->actual_length;
++		ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		return 1;
++	}
++	else if(hcint.b.frmovrun   )
++	{
++		_urbd->error_count=0;
++		_ifxhc->wait_for_sof   = 0;
++		release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
++		return 1;
++	}
++	return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_ctrlbulk_tx_csplit(ifxhcd_hcd_t      *_ifxhcd,
++                                      ifxhcd_hc_t       *_ifxhc,
++                                      ifxusb_hc_regs_t  *_hc_regs,
++                                      ifxhcd_urbd_t     *_urbd)
++{
++	hcint_data_t  hcint;
++	hcint_data_t  hcintmsk;
++	hctsiz_data_t hctsiz;
++	int out_nak_enh = 0;
++
++#if 1
++static int first=0;
++#endif
++
++	if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
++		out_nak_enh = 1;
++
++	hcint.d32    = ifxusb_rreg(&_hc_regs->hcint);
++	hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++	hctsiz.d32   = ifxusb_rreg(&_hc_regs->hctsiz);
++	disable_hc_int(_hc_regs,ack);
++	disable_hc_int(_hc_regs,nak);
++	disable_hc_int(_hc_regs,nyet);
++
++#if 1
++	if(!first&& _ifxhc->ep_type == IFXUSB_EP_TYPE_BULK
++	   &&(hcint.b.stall || hcint.b.datatglerr || hcint.b.frmovrun || hcint.b.bblerr || hcint.b.xacterr) && !hcint.b.ack)
++	{
++		showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++		first=1;
++		printk(KERN_INFO "   [%02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X] \n"
++		,*(_ifxhc->xfer_buff+ 0),*(_ifxhc->xfer_buff+ 1),*(_ifxhc->xfer_buff+ 2),*(_ifxhc->xfer_buff+ 3)
++		,*(_ifxhc->xfer_buff+ 4),*(_ifxhc->xfer_buff+ 5),*(_ifxhc->xfer_buff+ 6),*(_ifxhc->xfer_buff+ 7)
++		,*(_ifxhc->xfer_buff+ 8),*(_ifxhc->xfer_buff+ 9),*(_ifxhc->xfer_buff+10),*(_ifxhc->xfer_buff+11)
++		,*(_ifxhc->xfer_buff+12),*(_ifxhc->xfer_buff+13),*(_ifxhc->xfer_buff+14),*(_ifxhc->xfer_buff+15));
++
++		printk(KERN_INFO "   [_urbd->urb->actual_length:%08X _ifxhc->start_pkt_count:%08X hctsiz.b.pktcnt:%08X ,_urbd->xfer_len:%08x] \n"
++		,_urbd->urb->actual_length
++		,_ifxhc->start_pkt_count
++		,hctsiz.b.pktcnt
++		,_urbd->xfer_len);
++	}
++#endif
++
++	if(hcint.b.xfercomp   )
++	{
++		_urbd->error_count=0;
++		_ifxhc->split=1;
++		_ifxhc->do_ping= 0;
++		#if 0
++		if(_ifxhc->xfer_len==0 && !hcint.b.ack && (hcint.b.nak || hcint.b.nyet))
++		{
++			// Walkaround: When sending ZLP and receive NYEY or NAK but also issue CMPT intr
++			// Solution:   NoSplit: Resend at next SOF
++			//             Split  : Resend at next SOF with SSPLIT
++			_ifxhc->xfer_len       = 0;
++			_ifxhc->xfer_count     = 0;
++			_ifxhc->halt_status    = HC_XFER_NO_HALT_STATUS;
++			_ifxhc->wait_for_sof   = 1;
++			ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		}
++		else
++		#endif
++		{
++			_ifxhc->wait_for_sof   = 0;
++			complete_channel(_ifxhcd, _ifxhc, _urbd);
++		}
++		return 1;
++	}
++	else if(hcint.b.nak        )
++	{
++		_urbd->error_count=0;
++
++		_ifxhc->split          = 1;
++		_ifxhc->wait_for_sof   = 1;
++		if(!out_nak_enh  )
++			_ifxhc->do_ping        =1;
++		else
++			_ifxhc->do_ping        =0;
++		_ifxhc->xfer_len       = _urbd->xfer_len - _urbd->urb->actual_length;
++		_ifxhc->xfer_count     = _urbd->urb->actual_length;
++		ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		return 1;
++	}
++	else if(hcint.b.nyet)
++	{
++		//Retry Complete Split
++		// Issue Retry instantly on next SOF, without gothrough process_channels
++		_urbd->error_count=0;
++		_ifxhc->halt_status    = HC_XFER_NO_HALT_STATUS;
++		_ifxhc->wait_for_sof   = 1;
++		_ifxhc->do_ping        = 0;
++		ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		return 1;
++	}
++	else if(hcint.b.stall      )
++	{
++		_urbd->error_count=0;
++		_ifxhc->wait_for_sof   = 0;
++		_ifxhc->do_ping        = 0;
++		release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
++		return 1;
++	}
++	else if(hcint.b.xacterr    )
++	{
++		_urbd->error_count++;
++		if(_urbd->error_count>=3)
++		{
++			_urbd->error_count=0;
++			_ifxhc->wait_for_sof   = 0;
++			_ifxhc->do_ping        = 0;
++			release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
++		}
++		else
++		{
++			_ifxhc->split=1;
++			_ifxhc->wait_for_sof   = 1;
++			if(!out_nak_enh  )
++				_ifxhc->do_ping        =1;
++			else
++				_ifxhc->do_ping        =0;
++			_ifxhc->xfer_len       = _urbd->xfer_len - _urbd->urb->actual_length;
++			_ifxhc->xfer_count     = _urbd->urb->actual_length;
++			ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		}
++		return 1;
++	}
++	else if(hcint.b.datatglerr )
++	{
++		if(_ifxhc->data_pid_start == IFXUSB_HC_PID_DATA0)
++			_ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
++		else
++			_ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
++		_ifxhc->split=1;
++		_ifxhc->wait_for_sof   = 1;
++		if(!out_nak_enh  )
++			_ifxhc->do_ping        =1;
++		else
++			_ifxhc->do_ping        =0;
++		_ifxhc->xfer_len       = _urbd->xfer_len - _urbd->urb->actual_length;
++		_ifxhc->xfer_count     = _urbd->urb->actual_length;
++		ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		return 1;
++	}
++	else if(hcint.b.frmovrun   )
++	{
++		_urbd->error_count=0;
++		_ifxhc->wait_for_sof   = 0;
++		_ifxhc->do_ping        = 0;
++		release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
++		return 1;
++	}
++	else if(hcint.b.bblerr     )
++	{
++		_urbd->error_count=0;
++		_ifxhc->wait_for_sof   = 0;
++		_ifxhc->do_ping        = 0;
++		release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
++		return 1;
++	}
++	return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_intr_rx_csplit(ifxhcd_hcd_t      *_ifxhcd,
++                                  ifxhcd_hc_t       *_ifxhc,
++                                  ifxusb_hc_regs_t  *_hc_regs,
++                                  ifxhcd_urbd_t     *_urbd)
++{
++	hcint_data_t  hcint;
++	hcint_data_t  hcintmsk;
++	hctsiz_data_t hctsiz;
++
++	hcint.d32    = ifxusb_rreg(&_hc_regs->hcint);
++	hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++	hctsiz.d32   = ifxusb_rreg(&_hc_regs->hctsiz);
++	disable_hc_int(_hc_regs,ack);
++	disable_hc_int(_hc_regs,nak);
++	disable_hc_int(_hc_regs,nyet);
++	_ifxhc->do_ping        = 0;
++
++	if (hcint.b.xfercomp   )
++	{
++		_urbd->error_count=0;
++		_ifxhc->wait_for_sof   = 0;
++		_ifxhc->split=1;
++		complete_channel(_ifxhcd, _ifxhc, _urbd);
++		return 1;
++	}
++	else if(hcint.b.nak        )
++	{
++		_urbd->error_count=0;
++		_ifxhc->split          = 1;
++		_ifxhc->wait_for_sof   = _ifxhc->epqh->interval-1;
++		if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++		_ifxhc->xfer_len       = _urbd->xfer_len - _urbd->urb->actual_length;
++		_ifxhc->xfer_count     = _urbd->urb->actual_length;
++		ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		return 1;
++	}
++	else if(hcint.b.nyet)
++	{
++		_urbd->error_count=0;
++		_ifxhc->halt_status    = HC_XFER_NO_HALT_STATUS;
++		_ifxhc->wait_for_sof   = 0;
++
++		/*== AVM/BC 20100701 - Workaround FullSpeed Interrupts with HiSpeed Hub ==*/
++		_ifxhc->nyet_count++;
++		if(_ifxhc->nyet_count > 2) {
++			_ifxhc->split = 1;
++			_ifxhc->nyet_count = 0;
++			_ifxhc->wait_for_sof   = 5;
++		}
++
++		ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		return 1;
++	}
++	else if(hcint.b.frmovrun || hcint.b.bblerr || hcint.b.stall )
++	{
++		_urbd->error_count=0;
++		_ifxhc->wait_for_sof   = 0;
++		if     (hcint.b.stall)
++			release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
++		else if(hcint.b.bblerr )
++			release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
++		else if(hcint.b.frmovrun )
++			release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
++		return 1;
++	}
++	else if(hcint.b.xacterr    )
++	{
++		hcchar_data_t 	hcchar;
++		hcchar.d32 = ifxusb_rreg(&_hc_regs->hcchar);
++		_urbd->error_count=hcchar.b.multicnt;
++		if(_urbd->error_count>=3)
++		{
++			_urbd->error_count=0;
++			_ifxhc->wait_for_sof   = 0;
++			release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
++		}
++		else
++		{
++			_ifxhc->split=1;
++			_ifxhc->wait_for_sof   = _ifxhc->epqh->interval-1;
++			if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++			_ifxhc->xfer_len       = _urbd->xfer_len - _urbd->urb->actual_length;
++			_ifxhc->xfer_count     = _urbd->urb->actual_length;
++			ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		}
++		return 1;
++	}
++	else if(hcint.b.datatglerr )
++	{
++		if(_ifxhc->data_pid_start == IFXUSB_HC_PID_DATA0)
++			_ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
++		else
++			_ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
++		_ifxhc->split=1;
++		_ifxhc->wait_for_sof   = _ifxhc->epqh->interval-1;
++		if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++		_ifxhc->xfer_len       = _urbd->xfer_len - _urbd->urb->actual_length;
++		_ifxhc->xfer_count     = _urbd->urb->actual_length;
++		ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		return 1;
++	}
++	return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_intr_tx_csplit(ifxhcd_hcd_t      *_ifxhcd,
++                                  ifxhcd_hc_t       *_ifxhc,
++                                  ifxusb_hc_regs_t  *_hc_regs,
++                                  ifxhcd_urbd_t     *_urbd)
++{
++	hcint_data_t  hcint;
++	hcint_data_t  hcintmsk;
++	hctsiz_data_t hctsiz;
++	int out_nak_enh = 0;
++
++	if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
++		out_nak_enh = 1;
++
++	hcint.d32    = ifxusb_rreg(&_hc_regs->hcint);
++	hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++	hctsiz.d32   = ifxusb_rreg(&_hc_regs->hctsiz);
++	disable_hc_int(_hc_regs,ack);
++	disable_hc_int(_hc_regs,nak);
++	disable_hc_int(_hc_regs,nyet);
++
++	if(hcint.b.xfercomp   )
++	{
++		_urbd->error_count=0;
++		_ifxhc->wait_for_sof   = 0;
++		_ifxhc->split=1;
++		_ifxhc->do_ping        = 0;
++		complete_channel(_ifxhcd, _ifxhc, _urbd);
++		return 1;
++	}
++	else if(hcint.b.nak        )
++	{
++		_urbd->error_count=0;
++		_ifxhc->split          = 1;
++		_ifxhc->wait_for_sof   = _ifxhc->epqh->interval-1;
++		if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++		if(!out_nak_enh  )
++			_ifxhc->do_ping        =1;
++		else
++			_ifxhc->do_ping        =0;
++		_ifxhc->xfer_len       = _urbd->xfer_len - _urbd->urb->actual_length;
++		_ifxhc->xfer_count     = _urbd->urb->actual_length;
++		ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		return 1;
++	}
++	else if(hcint.b.nyet)
++	{
++		_urbd->error_count=0;
++		_ifxhc->halt_status    = HC_XFER_NO_HALT_STATUS;
++		_ifxhc->wait_for_sof   = 0;
++		_ifxhc->do_ping        = 0;
++
++		/*== AVM/BC 20100701 - Workaround FullSpeed Interrupts with HiSpeed Hub ==*/
++		_ifxhc->nyet_count++;
++		if(_ifxhc->nyet_count > 2) {
++			_ifxhc->split = 1;
++			_ifxhc->nyet_count = 0;
++			_ifxhc->wait_for_sof = 5;
++		}
++
++		ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		return 1;
++	}
++	else if(hcint.b.stall || hcint.b.frmovrun)
++	{
++		_urbd->error_count=0;
++		_ifxhc->wait_for_sof   = 0;
++		_ifxhc->do_ping        = 0;
++		if     (hcint.b.stall)
++			release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
++		else if(hcint.b.frmovrun )
++			release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
++		return 1;
++	}
++	else if(hcint.b.xacterr    )
++	{
++		hcchar_data_t 	hcchar;
++		hcchar.d32 = ifxusb_rreg(&_hc_regs->hcchar);
++		_urbd->error_count=hcchar.b.multicnt;
++		if(_urbd->error_count>=3)
++		{
++			_urbd->error_count=0;
++			_ifxhc->wait_for_sof   = 0;
++			_ifxhc->do_ping        = 0;
++			release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
++		}
++		else
++		{
++			_ifxhc->split=1;
++			_ifxhc->wait_for_sof   = _ifxhc->epqh->interval-1;
++			if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++			if(!out_nak_enh  )
++				_ifxhc->do_ping        =1;
++			else
++				_ifxhc->do_ping        =0;
++			_ifxhc->xfer_len       = _urbd->xfer_len - _urbd->urb->actual_length;
++			_ifxhc->xfer_count     = _urbd->urb->actual_length;
++			ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		}
++		return 1;
++	}
++	else if(hcint.b.datatglerr )
++	{
++		if(_ifxhc->data_pid_start == IFXUSB_HC_PID_DATA0)
++			_ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
++		else
++			_ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
++		_ifxhc->split=1;
++		if(!out_nak_enh  )
++			_ifxhc->do_ping        =1;
++		else
++			_ifxhc->do_ping        =0;
++		_ifxhc->xfer_len       = _urbd->xfer_len - _urbd->urb->actual_length;
++		_ifxhc->xfer_count     = _urbd->urb->actual_length;
++		ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++		return 1;
++	}
++	else if(hcint.b.bblerr     )
++	{
++		_urbd->error_count=0;
++		_ifxhc->wait_for_sof   = 0;
++		_ifxhc->do_ping        = 0;
++		release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
++		return 1;
++	}
++	return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_isoc_rx_csplit(ifxhcd_hcd_t      *_ifxhcd,
++                                   ifxhcd_hc_t       *_ifxhc,
++                                   ifxusb_hc_regs_t  *_hc_regs,
++                                   ifxhcd_urbd_t     *_urbd)
++{
++	#if defined(__EN_ISOC__) && defined(__EN_ISOC_SPLIT__)
++		hcint_data_t  hcint;
++		hcint_data_t  hcintmsk;
++		hctsiz_data_t hctsiz;
++
++		hcint.d32    = ifxusb_rreg(&_hc_regs->hcint);
++		hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++		hctsiz.d32   = ifxusb_rreg(&_hc_regs->hctsiz);
++		if(hcint.b.xfercomp   )
++		{
++			disable_hc_int(_hc_regs,ack);
++			disable_hc_int(_hc_regs,nak);
++			disable_hc_int(_hc_regs,nyet);
++			_urbd->error_count=0;
++			_ifxhc->wait_for_sof   = 0;
++			_ifxhc->split=1;
++			complete_channel(_ifxhcd, _ifxhc, _urbd);
++			return 1;
++		}
++		else if(hcint.b.nak        )
++		{
++			Retry Start Split (in next b_interval ¡V 1 uF)
++		}
++		else if(hcint.b.nyet)
++		{
++			//Do Next Complete Split
++			// Issue Retry instantly on next SOF, without gothrough process_channels
++			_urbd->error_count=0;
++			//disable_hc_int(_hc_regs,ack);
++			//disable_hc_int(_hc_regs,nak);
++			//disable_hc_int(_hc_regs,datatglerr);
++			_ifxhc->halt_status    = HC_XFER_NO_HALT_STATUS;
++			_ifxhc->wait_for_sof   = 1;
++			ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++			return 1;
++		}
++		else if(hcint.b.frmovrun || hcint.b.stall || hcint.b.bblerr)
++		{
++			_urbd->error_count=0;
++			disable_hc_int(_hc_regs,ack);
++			disable_hc_int(_hc_regs,nyet);
++			disable_hc_int(_hc_regs,nak);
++			_ifxhc->wait_for_sof   = 0;
++
++			//if(hctsiz.b.pktcnt==0)
++			//{
++			//	complete_channel(_ifxhcd, _ifxhc, _urbd);
++			//	return 1;
++			//}
++			//else
++			//	_urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
++			if     (hcint.b.stall)
++				release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
++			else if(hcint.b.frmovrun )
++			else if(hcint.b.bblerr )
++			return 1;
++		}
++		else if(hcint.b.xacterr    )
++		{
++			Rewind Buffer Pointers
++			if (HCCHARn.EC = = 3) // ERR response received
++			{
++				Record ERR error
++				Do Next Start Split (in next frame)
++			}
++			else
++			{
++				De-allocate Channel
++			}
++		}
++		else if(hcint.b.datatglerr )
++		{
++			warning
++		}
++		else if(hcint.b.ack )
++		{
++			warning
++		}
++	#endif
++	return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_isoc_tx_csplit(ifxhcd_hcd_t      *_ifxhcd,
++                                   ifxhcd_hc_t       *_ifxhc,
++                                   ifxusb_hc_regs_t  *_hc_regs,
++                                   ifxhcd_urbd_t     *_urbd)
++{
++	#if defined(__EN_ISOC__) && defined(__EN_ISOC_SPLIT__)
++		hcint_data_t  hcint;
++		hcint_data_t  hcintmsk;
++		hctsiz_data_t hctsiz;
++		int out_nak_enh = 0;
++
++		if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
++			out_nak_enh = 1;
++
++		hcint.d32    = ifxusb_rreg(&_hc_regs->hcint);
++		hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++		hctsiz.d32   = ifxusb_rreg(&_hc_regs->hctsiz);
++		warning
++	#endif
++	return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++
++static int32_t handle_hc_chhltd_intr(ifxhcd_hcd_t      *_ifxhcd,
++                                     ifxhcd_hc_t       *_ifxhc,
++                                     ifxusb_hc_regs_t  *_hc_regs,
++                                     ifxhcd_urbd_t      *_urbd)
++{
++	IFX_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: Channel Halted--\n", _ifxhc->hc_num);
++
++	_ifxhc->halting      = 0;
++	_ifxhc->xfer_started = 0;
++
++	if (_ifxhc->halt_status == HC_XFER_URB_DEQUEUE ||
++	    _ifxhc->halt_status == HC_XFER_AHB_ERR) {
++		/*
++		 * Just release the channel. A dequeue can happen on a
++		 * transfer timeout. In the case of an AHB Error, the channel
++		 * was forced to halt because there's no way to gracefully
++		 * recover.
++		 */
++		release_channel(_ifxhcd, _ifxhc, _ifxhc->halt_status);
++		return 1;
++	}
++
++	if     (_ifxhc->ep_type == IFXUSB_EP_TYPE_CTRL || _ifxhc->ep_type == IFXUSB_EP_TYPE_BULK)
++	{
++		if     (_ifxhc->split==0)
++		{
++			if(_ifxhc->is_in)
++				return (chhltd_ctrlbulk_rx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++			else
++				return (chhltd_ctrlbulk_tx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++		}
++		else if(_ifxhc->split==1)
++		{
++			if(_ifxhc->is_in)
++				return (chhltd_ctrlbulk_rx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++			else
++				return (chhltd_ctrlbulk_tx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++		}
++		else if(_ifxhc->split==2)
++		{
++			if(_ifxhc->is_in)
++				return (chhltd_ctrlbulk_rx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++			else
++				return (chhltd_ctrlbulk_tx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++		}
++	}
++	else if(_ifxhc->ep_type == IFXUSB_EP_TYPE_INTR)
++	{
++		if     (_ifxhc->split==0)
++		{
++			if(_ifxhc->is_in)
++				return (chhltd_intr_rx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++			else
++				return (chhltd_intr_tx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++		}
++		else if(_ifxhc->split==1)
++		{
++			if(_ifxhc->is_in)
++				return (chhltd_intr_rx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++			else
++				return (chhltd_intr_tx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++		}
++		else if(_ifxhc->split==2)
++		{
++			if(_ifxhc->is_in)
++				return (chhltd_intr_rx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++			else
++				return (chhltd_intr_tx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++		}
++	}
++	else if(_ifxhc->ep_type == IFXUSB_EP_TYPE_ISOC)
++	{
++		if     (_ifxhc->split==0)
++		{
++			if(_ifxhc->is_in)
++				return (chhltd_isoc_rx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++			else
++				return (chhltd_isoc_tx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++		}
++		else if(_ifxhc->split==1)
++		{
++			if(_ifxhc->is_in)
++				return (chhltd_isoc_rx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++			else
++				return (chhltd_isoc_tx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++		}
++		else if(_ifxhc->split==2)
++		{
++			if(_ifxhc->is_in)
++				return (chhltd_isoc_rx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++			else
++				return (chhltd_isoc_tx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++		}
++	}
++	return 0;
++}
++
++/*
++ * Handles a host channel AHB error interrupt. This handler is only called in
++ * DMA mode.
++ */
++static void hc_other_intr_dump(ifxhcd_hcd_t      *_ifxhcd,
++                               ifxhcd_hc_t       *_ifxhc,
++                               ifxusb_hc_regs_t  *_hc_regs,
++                               ifxhcd_urbd_t      *_urbd)
++{
++	#ifdef __DEBUG__
++		hcchar_data_t hcchar;
++		hcsplt_data_t hcsplt;
++		hctsiz_data_t hctsiz;
++		uint32_t      hcdma;
++		struct urb   *urb = _urbd->urb;
++		hcchar.d32 = ifxusb_rreg(&_hc_regs->hcchar);
++		hcsplt.d32 = ifxusb_rreg(&_hc_regs->hcsplt);
++		hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
++		hcdma = ifxusb_rreg(&_hc_regs->hcdma);
++
++		IFX_ERROR("Channel %d\n", _ifxhc->hc_num);
++		IFX_ERROR("  hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
++		IFX_ERROR("  hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
++		IFX_ERROR("  Device address: %d\n", usb_pipedevice(urb->pipe));
++		IFX_ERROR("  Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
++			    (usb_pipein(urb->pipe) ? "IN" : "OUT"));
++		IFX_ERROR("  Endpoint type: %s\n",
++			    ({char *pipetype;
++			    switch (usb_pipetype(urb->pipe)) {
++				    case PIPE_CONTROL: pipetype = "CTRL"; break;
++				    case PIPE_BULK: pipetype = "BULK"; break;
++				    case PIPE_INTERRUPT: pipetype = "INTR"; break;
++				    case PIPE_ISOCHRONOUS: pipetype = "ISOC"; break;
++				    default: pipetype = "????"; break;
++			    }; pipetype;}));
++		IFX_ERROR("  Speed: %s\n",
++			    ({char *speed;
++			    switch (urb->dev->speed) {
++				    case USB_SPEED_HIGH: speed = "HS"; break;
++				    case USB_SPEED_FULL: speed = "FS"; break;
++				    case USB_SPEED_LOW: speed = "LS"; break;
++			    	default: speed = "????"; break;
++			    }; speed;}));
++		IFX_ERROR("  Max packet size: %d\n",
++			    usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
++		IFX_ERROR("  Data buffer length: %d\n", urb->transfer_buffer_length);
++		IFX_ERROR("  Transfer buffer: %p, Transfer DMA: %p\n",
++			    urb->transfer_buffer, (void *)urb->transfer_dma);
++		IFX_ERROR("  Setup buffer: %p, Setup DMA: %p\n",
++			    urb->setup_packet, (void *)urb->setup_dma);
++		IFX_ERROR("  Interval: %d\n", urb->interval);
++	#endif //__DEBUG__
++}
++
++/*
++ * Handles a host channel ACK interrupt. This interrupt is enabled when
++ *  errors occur, and during Start Split transactions.
++ */
++static int32_t handle_hc_ack_intr(ifxhcd_hcd_t      *_ifxhcd,
++                                  ifxhcd_hc_t      *_ifxhc,
++                                  ifxusb_hc_regs_t *_hc_regs,
++                                  ifxhcd_urbd_t     *_urbd)
++{
++	_urbd->error_count=0;
++	if(_ifxhc->nak_countdown_r)
++	{
++		_ifxhc->nak_retry=_ifxhc->nak_retry_r;
++		_ifxhc->nak_countdown=_ifxhc->nak_countdown_r;
++	}
++	else
++		disable_hc_int(_hc_regs,nak);
++	disable_hc_int(_hc_regs,ack);
++	return 1;
++}
++
++/*
++ * Handles a host channel ACK interrupt. This interrupt is enabled when
++ *  errors occur, and during Start Split transactions.
++ */
++static int32_t handle_hc_nak_intr(ifxhcd_hcd_t      *_ifxhcd,
++                                  ifxhcd_hc_t      *_ifxhc,
++                                  ifxusb_hc_regs_t *_hc_regs,
++                                  ifxhcd_urbd_t     *_urbd)
++{
++
++	_urbd->error_count=0;
++
++	if(_ifxhc->nak_countdown_r)
++	{
++		_ifxhc->nak_countdown--;
++		if(!_ifxhc->nak_countdown)
++		{
++			_ifxhc->nak_countdown=_ifxhc->nak_countdown_r;
++			disable_hc_int(_hc_regs,ack);
++			disable_hc_int(_hc_regs,nak);
++			ifxhcd_hc_halt(&_ifxhcd->core_if, _ifxhc, HC_XFER_NAK);
++		}
++		else
++			enable_hc_int(_hc_regs,ack);
++	}
++	else
++	{
++		disable_hc_int(_hc_regs,ack);
++		disable_hc_int(_hc_regs,nak);
++	}
++	return 1;
++}
++
++/*
++ * Handles a host channel AHB error interrupt. This handler is only called in
++ * DMA mode.
++ */
++static int32_t handle_hc_ahberr_intr(ifxhcd_hcd_t      *_ifxhcd,
++                                     ifxhcd_hc_t       *_ifxhc,
++                                     ifxusb_hc_regs_t  *_hc_regs,
++                                     ifxhcd_urbd_t      *_urbd)
++{
++	IFX_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "AHB Error--\n", _ifxhc->hc_num);
++	hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
++
++	ifxhcd_hc_halt(&_ifxhcd->core_if, _ifxhc, HC_XFER_AHB_ERR);
++	return 1;
++}
++
++/*
++ * Datatoggle
++ */
++static int32_t handle_hc_datatglerr_intr(ifxhcd_hcd_t      *_ifxhcd,
++                                         ifxhcd_hc_t      *_ifxhc,
++                                         ifxusb_hc_regs_t *_hc_regs,
++                                         ifxhcd_urbd_t     *_urbd)
++{
++	IFX_ERROR( "--Host Channel %d Interrupt: "
++		    "DATATOGGLE Error--\n", _ifxhc->hc_num);
++	hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
++	disable_hc_int(_hc_regs,datatglerr);
++	return 1;
++}
++
++
++
++/*
++ * Interrupts which should not been triggered
++ */
++static int32_t handle_hc_frmovrun_intr(ifxhcd_hcd_t      *_ifxhcd,
++                                       ifxhcd_hc_t      *_ifxhc,
++                                       ifxusb_hc_regs_t *_hc_regs,
++                                       ifxhcd_urbd_t     *_urbd)
++{
++	IFX_ERROR( "--Host Channel %d Interrupt: "
++		    "FrameOverRun Error--\n", _ifxhc->hc_num);
++	hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
++	disable_hc_int(_hc_regs,frmovrun);
++	return 1;
++}
++
++static int32_t handle_hc_bblerr_intr(ifxhcd_hcd_t      *_ifxhcd,
++                                     ifxhcd_hc_t      *_ifxhc,
++                                     ifxusb_hc_regs_t *_hc_regs,
++                                     ifxhcd_urbd_t     *_urbd)
++{
++	IFX_ERROR( "--Host Channel %d Interrupt: "
++		    "BBL Error--\n", _ifxhc->hc_num);
++	hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
++	disable_hc_int(_hc_regs,bblerr);
++	return 1;
++}
++
++static int32_t handle_hc_xacterr_intr(ifxhcd_hcd_t      *_ifxhcd,
++                                      ifxhcd_hc_t      *_ifxhc,
++                                      ifxusb_hc_regs_t *_hc_regs,
++                                      ifxhcd_urbd_t     *_urbd)
++{
++	IFX_ERROR( "--Host Channel %d Interrupt: "
++		    "XACT Error--\n", _ifxhc->hc_num);
++	hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
++	disable_hc_int(_hc_regs,xacterr);
++	return 1;
++}
++
++static int32_t handle_hc_nyet_intr(ifxhcd_hcd_t      *_ifxhcd,
++                                   ifxhcd_hc_t      *_ifxhc,
++                                   ifxusb_hc_regs_t *_hc_regs,
++                                   ifxhcd_urbd_t     *_urbd)
++{
++	IFX_ERROR( "--Host Channel %d Interrupt: "
++		    "NYET--\n", _ifxhc->hc_num);
++	hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
++	_urbd->error_count=0;
++	disable_hc_int(_hc_regs,nyet);
++	return 1;
++}
++
++static int32_t handle_hc_stall_intr(ifxhcd_hcd_t      *_ifxhcd,
++                                    ifxhcd_hc_t      *_ifxhc,
++                                    ifxusb_hc_regs_t *_hc_regs,
++                                    ifxhcd_urbd_t     *_urbd)
++{
++	IFX_ERROR( "--Host Channel %d Interrupt: "
++		    "STALL--\n", _ifxhc->hc_num);
++	hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
++	disable_hc_int(_hc_regs,stall);
++	return 1;
++}
++
++static int32_t handle_hc_xfercomp_intr(ifxhcd_hcd_t      *_ifxhcd,
++                                       ifxhcd_hc_t      *_ifxhc,
++                                       ifxusb_hc_regs_t *_hc_regs,
++                                       ifxhcd_urbd_t     *_urbd)
++{
++	IFX_ERROR( "--Host Channel %d Interrupt: "
++		    "XFERCOMP--\n", _ifxhc->hc_num);
++	hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
++	disable_hc_int(_hc_regs,xfercomp);
++	return 1;
++}
++
++
++
++/* This interrupt indicates that the specified host channels has a pending
++ * interrupt. There are multiple conditions that can cause each host channel
++ * interrupt. This function determines which conditions have occurred for this
++ * host channel interrupt and handles them appropriately. */
++static int32_t handle_hc_n_intr (ifxhcd_hcd_t *_ifxhcd, uint32_t _num)
++{
++	uint32_t          hcintval,hcintmsk;
++	hcint_data_t      hcint;
++	ifxhcd_hc_t      *ifxhc;
++	ifxusb_hc_regs_t *hc_regs;
++	ifxhcd_urbd_t     *urbd;
++	unsigned long     flags;
++
++	int retval = 0;
++
++	IFX_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", _num);
++
++	/*== AVM/BC 20101111 Lock needed ==*/
++	SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
++
++	ifxhc = &_ifxhcd->ifxhc[_num];
++	hc_regs = _ifxhcd->core_if.hc_regs[_num];
++
++	hcintval  = ifxusb_rreg(&hc_regs->hcint);
++	hcintmsk  = ifxusb_rreg(&hc_regs->hcintmsk);
++	hcint.d32 = hcintval & hcintmsk;
++	IFX_DEBUGPL(DBG_HCDV, "  0x%08x & 0x%08x = 0x%08x\n",
++		    hcintval, hcintmsk, hcint.d32);
++
++	urbd = list_entry(ifxhc->epqh->urbd_list.next, ifxhcd_urbd_t, urbd_list_entry);
++
++	if (hcint.b.datatglerr)
++		retval |= handle_hc_datatglerr_intr(_ifxhcd, ifxhc, hc_regs, urbd);
++	if (hcint.b.frmovrun)
++		retval |= handle_hc_frmovrun_intr(_ifxhcd, ifxhc, hc_regs, urbd);
++	if (hcint.b.bblerr)
++		retval |= handle_hc_bblerr_intr(_ifxhcd, ifxhc, hc_regs, urbd);
++	if (hcint.b.xacterr)
++		retval |= handle_hc_xacterr_intr(_ifxhcd, ifxhc, hc_regs, urbd);
++	if (hcint.b.nyet)
++		retval |= handle_hc_nyet_intr(_ifxhcd, ifxhc, hc_regs, urbd);
++	if (hcint.b.ack)
++		retval |= handle_hc_ack_intr(_ifxhcd, ifxhc, hc_regs, urbd);
++	if (hcint.b.nak)
++		retval |= handle_hc_nak_intr(_ifxhcd, ifxhc, hc_regs, urbd);
++	if (hcint.b.stall)
++		retval |= handle_hc_stall_intr(_ifxhcd, ifxhc, hc_regs, urbd);
++	if (hcint.b.ahberr) {
++		clear_hc_int(hc_regs, ahberr);
++		retval |= handle_hc_ahberr_intr(_ifxhcd, ifxhc, hc_regs, urbd);
++	}
++	if (hcint.b.chhltd) {
++		/* == 20110901 AVM/WK Fix: Flag must not be cleared after restart of channel ==*/
++		clear_hc_int(hc_regs, chhltd);
++		retval |= handle_hc_chhltd_intr(_ifxhcd, ifxhc, hc_regs, urbd);
++	}
++	if (hcint.b.xfercomp)
++		retval |= handle_hc_xfercomp_intr(_ifxhcd, ifxhc, hc_regs, urbd);
++
++	/* == 20110901 AVM/WK Fix: Never clear possibly new intvals ==*/
++	//ifxusb_wreg(&hc_regs->hcint,hcintval);
++
++	SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
++
++	return retval;
++}
++
++
++
++
++
++
++static uint8_t update_interval_counter(ifxhcd_epqh_t *_epqh,uint32_t _diff)
++{
++	if(_diff>=_epqh->period_counter)
++	{
++		_epqh->period_do=1;
++		if(_diff>_epqh->interval)
++			_epqh->period_counter=1;
++		else
++			_epqh->period_counter=_epqh->period_counter+_epqh->interval-_diff;
++		return 1;
++	}
++	_epqh->period_counter=_epqh->period_counter-_diff;
++	return 0;
++}
++
++
++
++
++/*
++ * Handles the start-of-frame interrupt in host mode. Non-periodic
++ * transactions may be queued to the DWC_otg controller for the current
++ * (micro)frame. Periodic transactions may be queued to the controller for the
++ * next (micro)frame.
++ */
++static int32_t handle_sof_intr (ifxhcd_hcd_t *_ifxhcd)
++{
++	#ifdef __DYN_SOF_INTR__
++		uint8_t with_count_down=0;
++	#endif
++	uint8_t active_on=0;
++	uint8_t ready_on=0;
++	struct list_head  *epqh_entry;
++	ifxhcd_epqh_t     *epqh;
++	hfnum_data_t hfnum;
++	uint32_t fndiff;
++
++	unsigned long flags;
++#ifdef __USE_TIMER_4_SOF__
++	uint32_t wait_for_sof = 0x10000;
++#endif
++
++	SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
++
++	{
++		int               num_channels;
++		ifxusb_hc_regs_t *hc_regs;
++		int	              i;
++		num_channels = _ifxhcd->core_if.params.host_channels;
++
++// AVM/WK moved block here due to use of SOF timer
++		hfnum.d32 = ifxusb_rreg(&_ifxhcd->core_if.host_global_regs->hfnum);
++		fndiff = hfnum.b.frnum;
++		fndiff+= 0x00004000;
++		fndiff-= _ifxhcd->lastframe ;
++		fndiff&= 0x00003FFF;
++		if(!fndiff) fndiff =1;
++
++		for (i = 0; i < num_channels; i++)
++		{
++			if(_ifxhcd->ifxhc[i].wait_for_sof && _ifxhcd->ifxhc[i].xfer_started)
++			{
++#ifdef __USE_TIMER_4_SOF__
++				if (_ifxhcd->ifxhc[i].wait_for_sof > fndiff) {
++					_ifxhcd->ifxhc[i].wait_for_sof -= fndiff;
++				} else {
++					_ifxhcd->ifxhc[i].wait_for_sof = 0;
++				}
++#else
++				_ifxhcd->ifxhc[i].wait_for_sof--;
++#endif
++				if(_ifxhcd->ifxhc[i].wait_for_sof==0)
++				{
++					hcint_data_t hcint= { .d32=0 };
++					hc_regs = _ifxhcd->core_if.hc_regs[i];
++
++					hcint.d32 =0xFFFFFFFF;
++					ifxusb_wreg(&hc_regs->hcint, hcint.d32);
++
++					hcint.d32=ifxusb_rreg(&hc_regs->hcintmsk);
++					hcint.b.nak =0;
++					hcint.b.ack =0;
++					/* == 20110901 AVM/WK Fix: We don't need NOT YET IRQ ==*/
++					hcint.b.nyet=0;
++					_ifxhcd->ifxhc[i].nak_countdown=_ifxhcd->ifxhc[i].nak_countdown_r;
++					if(_ifxhcd->ifxhc[i].nak_countdown_r)
++						hcint.b.nak =1;
++					ifxusb_wreg(&hc_regs->hcintmsk, hcint.d32);
++
++					/* AVM WK / BC 20100827
++					 * FIX: Packet was ignored because of wrong Oddframe bit
++					 */
++					if (_ifxhcd->ifxhc[i].ep_type == IFXUSB_EP_TYPE_INTR || _ifxhcd->ifxhc[i].ep_type == IFXUSB_EP_TYPE_ISOC)
++					{
++						hcchar_data_t hcchar;
++						hcchar.d32 = _ifxhcd->ifxhc[i].hcchar;
++						hfnum.d32 = ifxusb_rreg(&_ifxhcd->core_if.host_global_regs->hfnum);
++						/* 1 if _next_ frame is odd, 0 if it's even */
++						hcchar.b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1;
++						_ifxhcd->ifxhc[i].hcchar = hcchar.d32;
++					}
++
++					ifxusb_wreg(&hc_regs->hcchar, _ifxhcd->ifxhc[i].hcchar);
++
++				}
++			}
++			else
++				_ifxhcd->ifxhc[i].wait_for_sof=0;
++
++#ifdef __USE_TIMER_4_SOF__
++			if (_ifxhcd->ifxhc[i].wait_for_sof && (wait_for_sof > _ifxhcd->ifxhc[i].wait_for_sof)) {
++				wait_for_sof = _ifxhcd->ifxhc[i].wait_for_sof;
++			}
++#endif
++		}
++	}
++
++	// ISOC Active
++	#ifdef __EN_ISOC__
++		#error ISOC not supported: missing SOF code
++		epqh_entry = _ifxhcd->epqh_isoc_active.next;
++		while (epqh_entry != &_ifxhcd->epqh_isoc_active)
++		{
++			epqh = list_entry(epqh_entry, ifxhcd_epqh_t, epqh_list_entry);
++			epqh_entry = epqh_entry->next;
++			#ifdef __DYN_SOF_INTR__
++				with_count_down=1;
++			#endif
++			active_on+=update_interval_counter(epqh,fndiff);
++		}
++
++		// ISOC Ready
++		epqh_entry = _ifxhcd->epqh_isoc_ready.next;
++		while (epqh_entry != &_ifxhcd->epqh_isoc_ready)
++		{
++			epqh = list_entry(epqh_entry, ifxhcd_epqh_t, epqh_list_entry);
++			epqh_entry = epqh_entry->next;
++			#ifdef __DYN_SOF_INTR__
++				with_count_down=1;
++			#endif
++			ready_on+=update_interval_counter(epqh,fndiff);
++		}
++	#endif
++
++	// INTR Active
++	epqh_entry = _ifxhcd->epqh_intr_active.next;
++	while (epqh_entry != &_ifxhcd->epqh_intr_active)
++	{
++		epqh = list_entry(epqh_entry, ifxhcd_epqh_t, epqh_list_entry);
++		epqh_entry = epqh_entry->next;
++		#ifdef __DYN_SOF_INTR__
++			with_count_down=1;
++		#endif
++#ifdef __USE_TIMER_4_SOF__
++		if (update_interval_counter(epqh,fndiff)) {
++			active_on ++;
++			wait_for_sof = 1;
++		} else {
++			if (epqh->period_counter && (wait_for_sof > epqh->period_counter)) {
++				wait_for_sof = epqh->period_counter;
++			}
++		}
++#else
++		active_on+=update_interval_counter(epqh,fndiff);
++#endif
++	}
++
++	// INTR Ready
++	epqh_entry = _ifxhcd->epqh_intr_ready.next;
++	while (epqh_entry != &_ifxhcd->epqh_intr_ready)
++	{
++		epqh = list_entry(epqh_entry, ifxhcd_epqh_t, epqh_list_entry);
++		epqh_entry = epqh_entry->next;
++		#ifdef __DYN_SOF_INTR__
++			with_count_down=1;
++		#endif
++#ifdef __USE_TIMER_4_SOF__
++		if (update_interval_counter(epqh,fndiff)) {
++			ready_on ++;
++			wait_for_sof = 1;
++		} else {
++			if (epqh->period_counter && (wait_for_sof > epqh->period_counter)) {
++				wait_for_sof = epqh->period_counter;
++			}
++		}
++#else
++		ready_on+=update_interval_counter(epqh,fndiff);
++#endif
++	}
++
++	// Stdby
++	epqh_entry = _ifxhcd->epqh_stdby.next;
++	while (epqh_entry != &_ifxhcd->epqh_stdby)
++	{
++		epqh = list_entry(epqh_entry, ifxhcd_epqh_t, epqh_list_entry);
++		epqh_entry = epqh_entry->next;
++		if(epqh->period_counter > 0 ) {
++#ifdef __USE_TIMER_4_SOF__
++			if (epqh->period_counter > fndiff) {
++				epqh->period_counter -= fndiff;
++			} else {
++				epqh->period_counter = 0;
++			}
++#else
++			epqh->period_counter --;
++#endif
++			#ifdef __DYN_SOF_INTR__
++				with_count_down=1;
++			#endif
++		}
++		if(epqh->period_counter == 0) {
++			ifxhcd_epqh_idle_periodic(epqh);
++		}
++#ifdef __USE_TIMER_4_SOF__
++		else {
++			if (wait_for_sof > epqh->period_counter) {
++				wait_for_sof = epqh->period_counter;
++			}
++		}
++#endif
++	}
++	SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
++
++	if(ready_on)
++		select_eps(_ifxhcd);
++	else if(active_on)
++		process_channels(_ifxhcd);
++
++	/* Clear interrupt */
++	{
++		gint_data_t gintsts;
++		gintsts.d32=0;
++		gintsts.b.sofintr = 1;
++		ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32);
++
++		#ifdef __DYN_SOF_INTR__
++			if(!with_count_down)
++				ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk, gintsts.d32,0);
++		#endif
++#ifdef __USE_TIMER_4_SOF__
++		wait_for_sof &= 0xFFFF; // reduce to 16 Bits.
++
++		if(wait_for_sof == 1) {
++			// enable SOF
++				gint_data_t gintsts;
++				gintsts.d32=0;
++				gintsts.b.sofintr = 1;
++				ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk, 0,gintsts.d32);
++		} else {
++			// disable SOF
++			ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk, gintsts.d32,0);
++			if (wait_for_sof > 1) {
++				// use timer, not SOF IRQ
++				hprt0_data_t   hprt0;
++				ktime_t ktime;
++				hprt0.d32 = ifxusb_read_hprt0 (&_ifxhcd->core_if);
++				if (hprt0.b.prtspd == IFXUSB_HPRT0_PRTSPD_HIGH_SPEED) {
++					ktime = ktime_set(0, wait_for_sof * 125 * 1000); /*--- wakeup in n*125usec ---*/
++				} else {
++					ktime = ktime_set(0, wait_for_sof * (1000*1000)); /*--- wakeup in n*1000usec ---*/
++				}
++				hrtimer_start(&_ifxhcd->hr_timer, ktime, HRTIMER_MODE_REL);
++			}
++		}
++#endif
++	}
++	_ifxhcd->lastframe=hfnum.b.frnum;
++	return 1;
++}
++
++
++
++/* There are multiple conditions that can cause a port interrupt. This function
++ * determines which interrupt conditions have occurred and handles them
++ * appropriately. */
++static int32_t handle_port_intr (ifxhcd_hcd_t *_ifxhcd)
++{
++	int retval = 0;
++	hprt0_data_t hprt0;
++	hprt0_data_t hprt0_modify;
++
++	hprt0.d32        =
++	hprt0_modify.d32 = ifxusb_rreg(_ifxhcd->core_if.hprt0);
++
++	/* Clear appropriate bits in HPRT0 to clear the interrupt bit in
++	 * GINTSTS */
++
++	hprt0_modify.b.prtena = 0;
++	hprt0_modify.b.prtconndet = 0;
++	hprt0_modify.b.prtenchng = 0;
++	hprt0_modify.b.prtovrcurrchng = 0;
++
++	/* Port Connect Detected
++	 * Set flag and clear if detected */
++	if (hprt0.b.prtconndet) {
++		IFX_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x "
++			    "Port Connect Detected--\n", hprt0.d32);
++		_ifxhcd->flags.b.port_connect_status_change = 1;
++		_ifxhcd->flags.b.port_connect_status = 1;
++		hprt0_modify.b.prtconndet = 1;
++
++		/* The Hub driver asserts a reset when it sees port connect
++		 * status change flag */
++		retval |= 1;
++	}
++
++	/* Port Enable Changed
++	 * Clear if detected - Set internal flag if disabled */
++	if (hprt0.b.prtenchng) {
++
++		IFX_DEBUGPL(DBG_HCD, "  --Port Interrupt HPRT0=0x%08x "
++			    "Port Enable Changed--\n", hprt0.d32);
++		hprt0_modify.b.prtenchng = 1;
++		if (hprt0.b.prtena == 1)
++			/* Port has been enabled set the reset change flag */
++			_ifxhcd->flags.b.port_reset_change = 1;
++		else
++			_ifxhcd->flags.b.port_enable_change = 1;
++		retval |= 1;
++	}
++
++	/* Overcurrent Change Interrupt */
++
++	if (hprt0.b.prtovrcurrchng) {
++		IFX_DEBUGPL(DBG_HCD, "  --Port Interrupt HPRT0=0x%08x "
++			    "Port Overcurrent Changed--\n", hprt0.d32);
++		_ifxhcd->flags.b.port_over_current_change = 1;
++		hprt0_modify.b.prtovrcurrchng = 1;
++		retval |= 1;
++	}
++
++	/* Clear Port Interrupts */
++	ifxusb_wreg(_ifxhcd->core_if.hprt0, hprt0_modify.d32);
++	return retval;
++}
++
++/*
++ * This interrupt indicates that SUSPEND state has been detected on
++ * the USB.
++ * No Functioning in Host Mode
++ */
++static int32_t handle_usb_suspend_intr(ifxhcd_hcd_t *_ifxhcd)
++{
++	gint_data_t gintsts;
++	IFX_DEBUGP("USB SUSPEND RECEIVED!\n");
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.usbsuspend = 1;
++	ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32);
++	return 1;
++}
++
++/*
++ * This interrupt indicates that the IFXUSB controller has detected a
++ * resume or remote wakeup sequence. If the IFXUSB controller is in
++ * low power mode, the handler must brings the controller out of low
++ * power mode. The controller automatically begins resume
++ * signaling. The handler schedules a time to stop resume signaling.
++ */
++static int32_t handle_wakeup_detected_intr(ifxhcd_hcd_t *_ifxhcd)
++{
++	gint_data_t gintsts;
++	hprt0_data_t hprt0 = {.d32=0};
++	pcgcctl_data_t pcgcctl = {.d32=0};
++	ifxusb_core_if_t *core_if = &_ifxhcd->core_if;
++
++	IFX_DEBUGPL(DBG_ANY, "++Resume and Remote Wakeup Detected Interrupt++\n");
++
++	/*
++	 * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms
++	 * so that OPT tests pass with all PHYs).
++	 */
++	/* Restart the Phy Clock */
++	pcgcctl.b.stoppclk = 1;
++	ifxusb_mreg(core_if->pcgcctl, pcgcctl.d32, 0);
++	UDELAY(10);
++
++	/* Now wait for 70 ms. */
++	hprt0.d32 = ifxusb_read_hprt0( core_if );
++	IFX_DEBUGPL(DBG_ANY,"Resume: HPRT0=%0x\n", hprt0.d32);
++	MDELAY(70);
++	hprt0.b.prtres = 0; /* Resume */
++	ifxusb_wreg(core_if->hprt0, hprt0.d32);
++	IFX_DEBUGPL(DBG_ANY,"Clear Resume: HPRT0=%0x\n", ifxusb_rreg(core_if->hprt0));
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.wkupintr = 1;
++	ifxusb_wreg(&core_if->core_global_regs->gintsts, gintsts.d32);
++	return 1;
++}
++
++/*
++ * This interrupt indicates that a device is initiating the Session
++ * Request Protocol to request the host to turn on bus power so a new
++ * session can begin. The handler responds by turning on bus power. If
++ * the DWC_otg controller is in low power mode, the handler brings the
++ * controller out of low power mode before turning on bus power.
++ */
++static int32_t handle_session_req_intr(ifxhcd_hcd_t *_ifxhcd)
++{
++	/* Clear interrupt */
++	gint_data_t gintsts = { .d32 = 0 };
++	gintsts.b.sessreqintr = 1;
++	ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32);
++	return 1;
++}
++
++/*
++ * This interrupt indicates that a device has been disconnected from
++ * the root port.
++ */
++static int32_t handle_disconnect_intr(ifxhcd_hcd_t *_ifxhcd)
++{
++	gint_data_t gintsts;
++
++	ifxhcd_disconnect(_ifxhcd);
++
++	gintsts.d32 = 0;
++	gintsts.b.disconnect = 1;
++	ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32);
++	return 1;
++}
++
++/*
++ * This function handles the Connector ID Status Change Interrupt.  It
++ * reads the OTG Interrupt Register (GOTCTL) to determine whether this
++ * is a Device to Host Mode transition or a Host Mode to Device
++ * Transition.
++ * This only occurs when the cable is connected/removed from the PHY
++ * connector.
++ */
++static int32_t handle_conn_id_status_change_intr(ifxhcd_hcd_t *_ifxhcd)
++{
++	gint_data_t gintsts;
++
++	IFX_WARN("ID Status Change Interrupt: currently in %s mode\n",
++	     ifxusb_mode(&_ifxhcd->core_if) ? "Host" : "Device");
++
++	gintsts.d32 = 0;
++	gintsts.b.conidstschng = 1;
++	ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32);
++	return 1;
++}
++
++static int32_t handle_otg_intr(ifxhcd_hcd_t *_ifxhcd)
++{
++	ifxusb_core_global_regs_t *global_regs = _ifxhcd->core_if.core_global_regs;
++	gotgint_data_t gotgint;
++	gotgint.d32 = ifxusb_rreg( &global_regs->gotgint);
++	/* Clear GOTGINT */
++	ifxusb_wreg (&global_regs->gotgint, gotgint.d32);
++	return 1;
++}
++
++/** This function will log a debug message */
++static int32_t handle_mode_mismatch_intr(ifxhcd_hcd_t *_ifxhcd)
++{
++	gint_data_t gintsts;
++
++	IFX_WARN("Mode Mismatch Interrupt: currently in %s mode\n",
++	     ifxusb_mode(&_ifxhcd->core_if) ? "Host" : "Device");
++	gintsts.d32 = 0;
++	gintsts.b.modemismatch = 1;
++	ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32);
++	return 1;
++}
++
++/** This function handles interrupts for the HCD. */
++int32_t ifxhcd_handle_intr (ifxhcd_hcd_t *_ifxhcd)
++{
++	int retval = 0;
++
++	ifxusb_core_if_t *core_if = &_ifxhcd->core_if;
++	/* AVM/BC 20101111 Unnecesary variable removed*/
++	//gint_data_t gintsts,gintsts2;
++	gint_data_t gintsts;
++
++	/* Check if HOST Mode */
++	if (ifxusb_is_device_mode(core_if))
++	{
++		IFX_ERROR("%s() CRITICAL!  IN DEVICE MODE\n", __func__);
++		return 0;
++	}
++
++	gintsts.d32 = ifxusb_read_core_intr(core_if);
++
++	if (!gintsts.d32)
++		return 0;
++
++	//Common INT
++	if (gintsts.b.modemismatch)
++	{
++		retval |= handle_mode_mismatch_intr(_ifxhcd);
++		gintsts.b.modemismatch=0;
++	}
++	if (gintsts.b.otgintr)
++	{
++		retval |= handle_otg_intr(_ifxhcd);
++		gintsts.b.otgintr=0;
++	}
++	if (gintsts.b.conidstschng)
++	{
++		retval |= handle_conn_id_status_change_intr(_ifxhcd);
++		gintsts.b.conidstschng=0;
++	}
++	if (gintsts.b.disconnect)
++	{
++		retval |= handle_disconnect_intr(_ifxhcd);
++		gintsts.b.disconnect=0;
++	}
++	if (gintsts.b.sessreqintr)
++	{
++		retval |= handle_session_req_intr(_ifxhcd);
++		gintsts.b.sessreqintr=0;
++	}
++	if (gintsts.b.wkupintr)
++	{
++		retval |= handle_wakeup_detected_intr(_ifxhcd);
++		gintsts.b.wkupintr=0;
++	}
++	if (gintsts.b.usbsuspend)
++	{
++		retval |= handle_usb_suspend_intr(_ifxhcd);
++		gintsts.b.usbsuspend=0;
++	}
++
++	//Host Int
++	if (gintsts.b.sofintr)
++	{
++		retval |= handle_sof_intr (_ifxhcd);
++		gintsts.b.sofintr=0;
++	}
++	if (gintsts.b.portintr)
++	{
++		retval |= handle_port_intr (_ifxhcd);
++		gintsts.b.portintr=0;
++	}
++	if (gintsts.b.hcintr)
++	{
++		int i;
++		haint_data_t haint;
++		haint.d32 = ifxusb_read_host_all_channels_intr(core_if);
++		for (i=0; i< core_if->params.host_channels; i++)
++			if (haint.b2.chint & (1 << i))
++				retval |= handle_hc_n_intr (_ifxhcd, i);
++		gintsts.b.hcintr=0;
++	}
++	return retval;
++}
+diff --git a/drivers/usb/ifxhcd/ifxhcd_queue.c b/drivers/usb/ifxhcd/ifxhcd_queue.c
+new file mode 100644
+index 0000000..8f9dd25
+--- /dev/null
++++ b/drivers/usb/ifxhcd/ifxhcd_queue.c
+@@ -0,0 +1,418 @@
++/*****************************************************************************
++ **   FILE NAME       : ifxhcd_queue.c
++ **   PROJECT         : IFX USB sub-system V3
++ **   MODULES         : IFX USB sub-system Host and Device driver
++ **   SRC VERSION     : 1.0
++ **   DATE            : 1/Jan/2009
++ **   AUTHOR          : Chen, Howard
++ **   DESCRIPTION     : This file contains the functions to manage Queue Heads and Queue
++ **                     Transfer Descriptors.
++ *****************************************************************************/
++
++/*!
++ \file ifxhcd_queue.c
++ \ingroup IFXUSB_DRIVER_V3
++  \brief This file contains the functions to manage Queue Heads and Queue
++  Transfer Descriptors.
++*/
++#include <linux/version.h>
++#include "ifxusb_version.h"
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/errno.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/string.h>
++
++#include "ifxusb_plat.h"
++#include "ifxusb_regs.h"
++#include "ifxusb_cif.h"
++#include "ifxhcd.h"
++
++#ifdef __EPQD_DESTROY_TIMEOUT__
++	#define epqh_self_destroy_timeout 5
++	static void eqph_destroy_func(unsigned long _ptr)
++	{
++		ifxhcd_epqh_t *epqh=(ifxhcd_epqh_t *)_ptr;
++		if(epqh)
++		{
++			ifxhcd_epqh_free (epqh);
++		}
++	}
++#endif
++
++#define SCHEDULE_SLOP 10
++
++/*!
++  \brief This function allocates and initializes a EPQH.
++
++  \param _ifxhcd The HCD state structure for the USB Host controller.
++  \param[in] _urb Holds the information about the device/endpoint that we need
++  to initialize the EPQH.
++
++  \return Returns pointer to the newly allocated EPQH, or NULL on error.
++ */
++ifxhcd_epqh_t *ifxhcd_epqh_create (ifxhcd_hcd_t *_ifxhcd, struct urb *_urb)
++{
++	ifxhcd_epqh_t *epqh;
++
++	hprt0_data_t   hprt0;
++	struct usb_host_endpoint *sysep = ifxhcd_urb_to_endpoint(_urb);
++
++	/* Allocate memory */
++//	epqh=(ifxhcd_epqh_t *) kmalloc (sizeof(ifxhcd_epqh_t), GFP_KERNEL);
++	epqh=(ifxhcd_epqh_t *) kmalloc (sizeof(ifxhcd_epqh_t), GFP_ATOMIC);
++
++	if(epqh == NULL)
++		return NULL;
++
++	memset (epqh, 0, sizeof (ifxhcd_epqh_t));
++
++	epqh->sysep=sysep;
++
++	/* Initialize EPQH */
++	switch (usb_pipetype(_urb->pipe))
++	{
++		case PIPE_CONTROL    : epqh->ep_type = IFXUSB_EP_TYPE_CTRL; break;
++		case PIPE_BULK       : epqh->ep_type = IFXUSB_EP_TYPE_BULK; break;
++		case PIPE_ISOCHRONOUS: epqh->ep_type = IFXUSB_EP_TYPE_ISOC; break;
++		case PIPE_INTERRUPT  : epqh->ep_type = IFXUSB_EP_TYPE_INTR; break;
++	}
++
++	//epqh->data_toggle = IFXUSB_HC_PID_DATA0;
++
++	epqh->mps = usb_maxpacket(_urb->dev, _urb->pipe, !(usb_pipein(_urb->pipe)));
++
++	hprt0.d32 = ifxusb_read_hprt0 (&_ifxhcd->core_if);
++
++	INIT_LIST_HEAD(&epqh->urbd_list);
++	INIT_LIST_HEAD(&epqh->epqh_list_entry);
++	epqh->hc = NULL;
++
++	epqh->dump_buf = ifxusb_alloc_buf(epqh->mps, 0);
++
++	/* FS/LS Enpoint on HS Hub
++	 * NOT virtual root hub */
++	epqh->need_split = 0;
++	epqh->pkt_count_limit=0;
++	if(epqh->ep_type == IFXUSB_EP_TYPE_BULK && !(usb_pipein(_urb->pipe)) )
++		epqh->pkt_count_limit=4;
++	if (hprt0.b.prtspd == IFXUSB_HPRT0_PRTSPD_HIGH_SPEED &&
++	    ((_urb->dev->speed == USB_SPEED_LOW) ||
++	     (_urb->dev->speed == USB_SPEED_FULL)) &&
++	     (_urb->dev->tt) && (_urb->dev->tt->hub->devnum != 1))
++	{
++		IFX_DEBUGPL(DBG_HCD, "QH init: EP %d: TT found at hub addr %d, for port %d\n",
++		       usb_pipeendpoint(_urb->pipe), _urb->dev->tt->hub->devnum,
++		       _urb->dev->ttport);
++		epqh->need_split = 1;
++		epqh->pkt_count_limit=1;
++	}
++
++	if (epqh->ep_type == IFXUSB_EP_TYPE_INTR ||
++	    epqh->ep_type == IFXUSB_EP_TYPE_ISOC)
++	{
++		/* Compute scheduling parameters once and save them. */
++		epqh->interval    = _urb->interval;
++		if(epqh->need_split)
++			epqh->interval *= 8;
++	}
++
++	epqh->period_counter=0;
++	epqh->is_active=0;
++
++	#ifdef __EPQD_DESTROY_TIMEOUT__
++		/* Start a timer for this transfer. */
++		init_timer(&epqh->destroy_timer);
++		epqh->destroy_timer.function = eqph_destroy_func;
++		epqh->destroy_timer.data = (unsigned long)(epqh);
++	#endif
++
++	#ifdef __DEBUG__
++		IFX_DEBUGPL(DBG_HCD , "IFXUSB HCD EPQH Initialized\n");
++		IFX_DEBUGPL(DBG_HCDV, "IFXUSB HCD EPQH  - epqh = %p\n", epqh);
++		IFX_DEBUGPL(DBG_HCDV, "IFXUSB HCD EPQH  - Device Address = %d EP %d, %s\n",
++			    _urb->dev->devnum,
++			    usb_pipeendpoint(_urb->pipe),
++			    usb_pipein(_urb->pipe) == USB_DIR_IN ? "IN" : "OUT");
++		IFX_DEBUGPL(DBG_HCDV, "IFXUSB HCD EPQH  - Speed = %s\n",
++			    ({ char *speed; switch (_urb->dev->speed) {
++			    case USB_SPEED_LOW: speed  = "low" ; break;
++			    case USB_SPEED_FULL: speed = "full"; break;
++			    case USB_SPEED_HIGH: speed = "high"; break;
++			    default: speed = "?";	break;
++			    }; speed;}));
++		IFX_DEBUGPL(DBG_HCDV, "IFXUSB HCD EPQH  - Type = %s\n",
++			({
++				char *type; switch (epqh->ep_type)
++				{
++				    case IFXUSB_EP_TYPE_ISOC: type = "isochronous"; break;
++				    case IFXUSB_EP_TYPE_INTR: type = "interrupt"  ; break;
++				    case IFXUSB_EP_TYPE_CTRL: type = "control"    ; break;
++				    case IFXUSB_EP_TYPE_BULK: type = "bulk"       ; break;
++				    default: type = "?";	break;
++				};
++				type;
++			}));
++		if (epqh->ep_type == IFXUSB_EP_TYPE_INTR)
++			IFX_DEBUGPL(DBG_HCDV, "IFXUSB HCD EPQH - interval = %d\n", epqh->interval);
++	#endif
++
++	return epqh;
++}
++
++
++
++
++
++
++/*!
++  \brief Free the EPQH.  EPQH should already be removed from a list.
++  URBD list should already be empty if called from URB Dequeue.
++
++  \param[in] _epqh The EPQH to free.
++ */
++void ifxhcd_epqh_free (ifxhcd_epqh_t *_epqh)
++{
++	unsigned long     flags;
++
++	if(_epqh->sysep) _epqh->sysep->hcpriv=NULL;
++	_epqh->sysep=NULL;
++
++	if(!_epqh)
++		return;
++
++	/* Free each QTD in the QTD list */
++	local_irq_save (flags);
++	if (!list_empty(&_epqh->urbd_list))
++		IFX_WARN("%s() invalid epqh state\n",__func__);
++
++	#if defined(__UNALIGNED_BUFFER_ADJ__)
++		if(_epqh->aligned_buf)
++			ifxusb_free_buf(_epqh->aligned_buf);
++		if(_epqh->aligned_setup)
++			ifxusb_free_buf(_epqh->aligned_setup);
++	#endif
++
++	if (!list_empty(&_epqh->epqh_list_entry))
++		list_del_init(&_epqh->epqh_list_entry);
++
++	#ifdef __EPQD_DESTROY_TIMEOUT__
++		del_timer(&_epqh->destroy_timer);
++	#endif
++	if(_epqh->dump_buf)
++		ifxusb_free_buf(_epqh->dump_buf);
++	_epqh->dump_buf=0;
++
++
++	kfree (_epqh);
++	local_irq_restore (flags);
++}
++
++/*!
++  \brief This function adds a EPQH to
++
++  \return 0 if successful, negative error code otherwise.
++ */
++void ifxhcd_epqh_ready(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh)
++{
++	unsigned long flags;
++	local_irq_save(flags);
++	if (list_empty(&_epqh->epqh_list_entry))
++	{
++		#ifdef __EN_ISOC__
++		if     (_epqh->ep_type == IFXUSB_EP_TYPE_ISOC)
++			list_add_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_isoc_ready);
++		else
++		#endif
++		if(_epqh->ep_type == IFXUSB_EP_TYPE_INTR)
++			list_add_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_intr_ready);
++		else
++			list_add_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_np_ready);
++		_epqh->is_active=0;
++	}
++	else if(!_epqh->is_active)
++	{
++		#ifdef __EN_ISOC__
++		if     (_epqh->ep_type == IFXUSB_EP_TYPE_ISOC)
++			list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_isoc_ready);
++		else
++		#endif
++		if(_epqh->ep_type == IFXUSB_EP_TYPE_INTR)
++			list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_intr_ready);
++		else
++			list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_np_ready);
++	}
++	#ifdef __EPQD_DESTROY_TIMEOUT__
++		del_timer(&_epqh->destroy_timer);
++	#endif
++	local_irq_restore(flags);
++}
++
++void ifxhcd_epqh_active(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh)
++{
++	unsigned long flags;
++	local_irq_save(flags);
++	if (list_empty(&_epqh->epqh_list_entry))
++		IFX_WARN("%s() invalid epqh state\n",__func__);
++	#ifdef __EN_ISOC__
++		if     (_epqh->ep_type == IFXUSB_EP_TYPE_ISOC)
++			list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_isoc_active);
++		else
++	#endif
++	if(_epqh->ep_type == IFXUSB_EP_TYPE_INTR)
++		list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_intr_active);
++	else
++		list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_np_active);
++	_epqh->is_active=1;
++	#ifdef __EPQD_DESTROY_TIMEOUT__
++		del_timer(&_epqh->destroy_timer);
++	#endif
++	local_irq_restore(flags);
++}
++
++void ifxhcd_epqh_idle(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh)
++{
++	unsigned long flags;
++	local_irq_save(flags);
++
++	if (list_empty(&_epqh->urbd_list))
++	{
++		if(_epqh->ep_type == IFXUSB_EP_TYPE_ISOC || _epqh->ep_type == IFXUSB_EP_TYPE_INTR)
++		{
++			list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_stdby);
++		}
++		else
++		{
++			list_del_init(&_epqh->epqh_list_entry);
++			#ifdef __EPQD_DESTROY_TIMEOUT__
++				del_timer(&_epqh->destroy_timer);
++				_epqh->destroy_timer.expires = jiffies + (HZ*epqh_self_destroy_timeout);
++				add_timer(&_epqh->destroy_timer );
++			#endif
++		}
++	}
++	else
++	{
++		#ifdef __EN_ISOC__
++		if     (_epqh->ep_type == IFXUSB_EP_TYPE_ISOC)
++			list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_isoc_ready);
++		else
++		#endif
++		if(_epqh->ep_type == IFXUSB_EP_TYPE_INTR)
++			list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_intr_ready);
++		else
++			list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_np_ready);
++	}
++	_epqh->is_active=0;
++	local_irq_restore(flags);
++}
++
++
++void ifxhcd_epqh_idle_periodic(ifxhcd_epqh_t *_epqh)
++{
++	unsigned long flags;
++	if(_epqh->ep_type != IFXUSB_EP_TYPE_ISOC && _epqh->ep_type != IFXUSB_EP_TYPE_INTR)
++		return;
++
++	local_irq_save(flags);
++
++	if (list_empty(&_epqh->epqh_list_entry))
++		IFX_WARN("%s() invalid epqh state\n",__func__);
++	if (!list_empty(&_epqh->urbd_list))
++		IFX_WARN("%s() invalid epqh state(not empty)\n",__func__);
++
++	_epqh->is_active=0;
++	list_del_init(&_epqh->epqh_list_entry);
++	#ifdef __EPQD_DESTROY_TIMEOUT__
++		del_timer(&_epqh->destroy_timer);
++		_epqh->destroy_timer.expires = jiffies + (HZ*epqh_self_destroy_timeout);
++		add_timer(&_epqh->destroy_timer );
++	#endif
++
++	local_irq_restore(flags);
++}
++
++
++int ifxhcd_urbd_create (ifxhcd_hcd_t *_ifxhcd,struct urb *_urb)
++{
++	ifxhcd_urbd_t            *urbd;
++	struct usb_host_endpoint *sysep;
++	ifxhcd_epqh_t            *epqh;
++	unsigned long             flags;
++	/* == AVM/WK 20100714 retval correctly initialized ==*/
++	int                       retval = -ENOMEM;
++
++	/*== AVM/BC 20100630 - Spinlock ==*/
++	//local_irq_save(flags);
++	SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
++
++//		urbd =  (ifxhcd_urbd_t *) kmalloc (sizeof(ifxhcd_urbd_t), GFP_KERNEL);
++	urbd =  (ifxhcd_urbd_t *) kmalloc (sizeof(ifxhcd_urbd_t), GFP_ATOMIC);
++	if (urbd != NULL) /* Initializes a QTD structure.*/
++	{
++		retval = 0;
++		memset (urbd, 0, sizeof (ifxhcd_urbd_t));
++
++		sysep = ifxhcd_urb_to_endpoint(_urb);
++		epqh = (ifxhcd_epqh_t *)sysep->hcpriv;
++		if (epqh == NULL)
++		{
++			epqh = ifxhcd_epqh_create (_ifxhcd, _urb);
++			if (epqh == NULL)
++			{
++				retval = -ENOSPC;
++				kfree(urbd);
++				//local_irq_restore (flags);
++				SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
++				return retval;
++			}
++			sysep->hcpriv = epqh;
++		}
++
++		INIT_LIST_HEAD(&urbd->urbd_list_entry);
++
++		/*== AVM/BC 20100630 - 2.6.28 needs HCD link/unlink URBs ==*/
++		retval = usb_hcd_link_urb_to_ep(ifxhcd_to_syshcd(_ifxhcd), _urb);
++
++		if (unlikely(retval)){
++			kfree(urbd);
++			kfree(epqh);
++			SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
++			return retval;
++		}
++
++		list_add_tail(&urbd->urbd_list_entry, &epqh->urbd_list);
++		urbd->urb = _urb;
++		_urb->hcpriv = urbd;
++
++		urbd->epqh=epqh;
++		urbd->is_in=usb_pipein(_urb->pipe) ? 1 : 0;;
++
++		urbd->xfer_len=_urb->transfer_buffer_length;
++#define URB_NO_SETUP_DMA_MAP 0
++
++		if(urbd->xfer_len>0)
++		{
++			if(_urb->transfer_flags && URB_NO_TRANSFER_DMA_MAP)
++				urbd->xfer_buff = (uint8_t *) (KSEG1ADDR((uint32_t *)_urb->transfer_dma));
++			else
++				urbd->xfer_buff = (uint8_t *) _urb->transfer_buffer;
++		}
++		if(epqh->ep_type == IFXUSB_EP_TYPE_CTRL)
++		{
++			if(_urb->transfer_flags && URB_NO_SETUP_DMA_MAP)
++				urbd->setup_buff = (uint8_t *) (KSEG1ADDR((uint32_t *)_urb->setup_dma));
++			else
++				urbd->setup_buff = (uint8_t *) _urb->setup_packet;
++		}
++	}
++	//local_irq_restore (flags);
++	SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
++	return retval;
++}
++
+diff --git a/drivers/usb/ifxhcd/ifxusb_cif.c b/drivers/usb/ifxhcd/ifxusb_cif.c
+new file mode 100644
+index 0000000..10b1292
+--- /dev/null
++++ b/drivers/usb/ifxhcd/ifxusb_cif.c
+@@ -0,0 +1,1458 @@
++/*****************************************************************************
++ **   FILE NAME       : ifxusb_cif.c
++ **   PROJECT         : IFX USB sub-system V3
++ **   MODULES         : IFX USB sub-system Host and Device driver
++ **   SRC VERSION     : 1.0
++ **   DATE            : 1/Jan/2009
++ **   AUTHOR          : Chen, Howard
++ **   DESCRIPTION     : The Core Interface provides basic services for accessing and
++ **                     managing the IFX USB hardware. These services are used by both the
++ **                     Host Controller Driver and the Peripheral Controller Driver.
++ *****************************************************************************/
++
++/*!
++ \file ifxusb_cif.c
++ \ingroup IFXUSB_DRIVER_V3
++ \brief This file contains the interface to the IFX USB Core.
++*/
++
++#include <linux/clk.h>
++#include <linux/version.h>
++#include "ifxusb_version.h"
++
++#include <asm/byteorder.h>
++#include <asm/unaligned.h>
++
++
++#include <linux/jiffies.h>
++#include <linux/platform_device.h>
++#include <linux/kernel.h>
++#include <linux/ioport.h>
++
++#if defined(__UEIP__)
++//	#include <asm/ifx/ifx_pmu.h>
++//	#include <ifx_pmu.h>
++#endif
++
++
++#include "ifxusb_plat.h"
++#include "ifxusb_regs.h"
++#include "ifxusb_cif.h"
++
++
++#ifdef __IS_DEVICE__
++	#include "ifxpcd.h"
++#endif
++
++#ifdef __IS_HOST__
++	#include "ifxhcd.h"
++#endif
++
++#include <linux/mm.h>
++
++#include <linux/gfp.h>
++
++#if defined(__UEIP__)
++//	#include <asm/ifx/ifx_board.h>
++	//#include <ifx_board.h>
++#endif
++
++//#include <asm/ifx/ifx_gpio.h>
++//#include <ifx_gpio.h>
++#if defined(__UEIP__)
++//	#include <asm/ifx/ifx_led.h>
++	//#include <ifx_led.h>
++#endif
++
++
++
++#if defined(__UEIP__)
++	#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
++		#ifndef USB_CTRL_PMU_SETUP
++			#define USB_CTRL_PMU_SETUP(__x) USB0_CTRL_PMU_SETUP(__x)
++		#endif
++		#ifndef USB_PHY_PMU_SETUP
++			#define USB_PHY_PMU_SETUP(__x) USB0_PHY_PMU_SETUP(__x)
++		#endif
++	#endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
++#endif // defined(__UEIP__)
++
++/*!
++ \brief This function is called to allocate buffer of specified size.
++        The allocated buffer is mapped into DMA accessable address.
++ \param size Size in BYTE to be allocated
++ \param clear 0: don't do clear after buffer allocated, other: do clear to zero
++ \return 0/NULL: Fail; uncached pointer of allocated buffer
++ */
++void *ifxusb_alloc_buf(size_t size, int clear)
++{
++	uint32_t *cached,*uncached;
++	uint32_t totalsize,page;
++
++	if(!size)
++		return 0;
++
++	size=(size+3)&0xFFFFFFFC;
++	totalsize=size + 12;
++	page=get_order(totalsize);
++
++	cached = (void *) __get_free_pages(( GFP_ATOMIC | GFP_DMA), page);
++
++	if(!cached)
++	{
++		IFX_PRINT("%s Allocation Failed size:%d\n",__func__,size);
++		return NULL;
++	}
++
++	uncached = (uint32_t *)(KSEG1ADDR(cached));
++	if(clear)
++		memset(uncached, 0, totalsize);
++
++	*(uncached+0)=totalsize;
++	*(uncached+1)=page;
++	*(uncached+2)=(uint32_t)cached;
++	return (void *)(uncached+3);
++}
++
++
++/*!
++ \brief This function is called to free allocated buffer.
++ \param vaddr the uncached pointer of the buffer
++ */
++void ifxusb_free_buf(void *vaddr)
++{
++	uint32_t totalsize,page;
++	uint32_t *cached,*uncached;
++
++	if(vaddr != NULL)
++	{
++		uncached=vaddr;
++		uncached-=3;
++		totalsize=*(uncached+0);
++		page=*(uncached+1);
++		cached=(uint32_t *)(*(uncached+2));
++		if(totalsize && page==get_order(totalsize) && cached==(uint32_t *)(KSEG0ADDR(uncached)))
++		{
++			free_pages((unsigned long)cached, page);
++			return;
++		}
++		// the memory is not allocated by ifxusb_alloc_buf. Allowed but must be careful.
++		return;
++	}
++}
++
++
++
++/*!
++   \brief This function is called to initialize the IFXUSB CSR data
++ 	 structures.  The register addresses in the device and host
++ 	 structures are initialized from the base address supplied by the
++ 	 caller.  The calling function must make the OS calls to get the
++ 	 base address of the IFXUSB controller registers.
++
++   \param _core_if        Pointer of core_if structure
++   \param _irq            irq number
++   \param _reg_base_addr  Base address of IFXUSB core registers
++   \param _fifo_base_addr Fifo base address
++   \param _fifo_dbg_addr  Fifo debug address
++   \return 	0: success;
++ */
++int ifxusb_core_if_init(ifxusb_core_if_t *_core_if,
++                        int               _irq,
++                        uint32_t          _reg_base_addr,
++                        uint32_t          _fifo_base_addr,
++                        uint32_t          _fifo_dbg_addr)
++{
++	int retval = 0;
++	uint32_t *reg_base  =NULL;
++    uint32_t *fifo_base =NULL;
++    uint32_t *fifo_dbg  =NULL;
++
++    int i;
++
++	IFX_DEBUGPL(DBG_CILV, "%s(%p,%d,0x%08X,0x%08X,0x%08X)\n", __func__,
++	                                             _core_if,
++	                                             _irq,
++	                                             _reg_base_addr,
++	                                             _fifo_base_addr,
++	                                             _fifo_dbg_addr);
++
++	if( _core_if == NULL)
++	{
++		IFX_ERROR("%s() invalid _core_if\n", __func__);
++		retval = -ENOMEM;
++		goto fail;
++	}
++
++	//memset(_core_if, 0, sizeof(ifxusb_core_if_t));
++
++	_core_if->irq=_irq;
++
++	reg_base  =ioremap_nocache(_reg_base_addr , IFXUSB_IOMEM_SIZE  );
++	fifo_base =ioremap_nocache(_fifo_base_addr, IFXUSB_FIFOMEM_SIZE);
++    fifo_dbg  =ioremap_nocache(_fifo_dbg_addr , IFXUSB_FIFODBG_SIZE);
++	if( reg_base == NULL || fifo_base == NULL || fifo_dbg == NULL)
++	{
++		IFX_ERROR("%s() usb ioremap() failed\n", __func__);
++		retval = -ENOMEM;
++		goto fail;
++	}
++
++	_core_if->core_global_regs = (ifxusb_core_global_regs_t *)reg_base;
++
++	/*
++	 * Attempt to ensure this device is really a IFXUSB Controller.
++	 * Read and verify the SNPSID register contents. The value should be
++	 * 0x45F42XXX
++	 */
++	{
++		int32_t snpsid;
++		snpsid = ifxusb_rreg(&_core_if->core_global_regs->gsnpsid);
++		if ((snpsid & 0xFFFFF000) != 0x4F542000)
++		{
++			IFX_ERROR("%s() snpsid error(0x%08x) failed\n", __func__,snpsid);
++			retval = -EINVAL;
++			goto fail;
++		}
++		_core_if->snpsid=snpsid;
++	}
++
++	#ifdef __IS_HOST__
++		_core_if->host_global_regs = (ifxusb_host_global_regs_t *)
++		    ((uint32_t)reg_base + IFXUSB_HOST_GLOBAL_REG_OFFSET);
++		_core_if->hprt0 = (uint32_t*)((uint32_t)reg_base + IFXUSB_HOST_PORT_REGS_OFFSET);
++
++		for (i=0; i<MAX_EPS_CHANNELS; i++)
++		{
++			_core_if->hc_regs[i] = (ifxusb_hc_regs_t *)
++			    ((uint32_t)reg_base + IFXUSB_HOST_CHAN_REGS_OFFSET +
++			    (i * IFXUSB_CHAN_REGS_OFFSET));
++			IFX_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n",
++			    i, &_core_if->hc_regs[i]->hcchar);
++		}
++	#endif //__IS_HOST__
++
++	#ifdef __IS_DEVICE__
++		_core_if->dev_global_regs =
++		    (ifxusb_device_global_regs_t *)((uint32_t)reg_base + IFXUSB_DEV_GLOBAL_REG_OFFSET);
++
++		for (i=0; i<MAX_EPS_CHANNELS; i++)
++		{
++			_core_if->in_ep_regs[i] = (ifxusb_dev_in_ep_regs_t *)
++			    ((uint32_t)reg_base + IFXUSB_DEV_IN_EP_REG_OFFSET +
++			    (i * IFXUSB_EP_REG_OFFSET));
++			_core_if->out_ep_regs[i] = (ifxusb_dev_out_ep_regs_t *)
++			    ((uint32_t)reg_base + IFXUSB_DEV_OUT_EP_REG_OFFSET +
++			    (i * IFXUSB_EP_REG_OFFSET));
++			IFX_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p/%p %p/0x%08X/0x%08X\n",
++			    i, &_core_if->in_ep_regs[i]->diepctl, _core_if->in_ep_regs[i],
++			    reg_base,IFXUSB_DEV_IN_EP_REG_OFFSET,(i * IFXUSB_EP_REG_OFFSET)
++			    );
++			IFX_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p/%p %p/0x%08X/0x%08X\n",
++			    i, &_core_if->out_ep_regs[i]->doepctl, _core_if->out_ep_regs[i],
++			    reg_base,IFXUSB_DEV_OUT_EP_REG_OFFSET,(i * IFXUSB_EP_REG_OFFSET)
++			    );
++		}
++	#endif //__IS_DEVICE__
++
++	/* Setting the FIFO and other Address. */
++	for (i=0; i<MAX_EPS_CHANNELS; i++)
++	{
++		_core_if->data_fifo[i] = fifo_base + (i * IFXUSB_DATA_FIFO_SIZE);
++		IFX_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08x\n",
++		    i, (unsigned)_core_if->data_fifo[i]);
++	}
++
++	_core_if->data_fifo_dbg = fifo_dbg;
++	_core_if->pcgcctl = (uint32_t*)(((uint32_t)reg_base) + IFXUSB_PCGCCTL_OFFSET);
++
++	/*
++	 * Store the contents of the hardware configuration registers here for
++	 * easy access later.
++	 */
++	_core_if->hwcfg1.d32 = ifxusb_rreg(&_core_if->core_global_regs->ghwcfg1);
++	_core_if->hwcfg2.d32 = ifxusb_rreg(&_core_if->core_global_regs->ghwcfg2);
++	_core_if->hwcfg3.d32 = ifxusb_rreg(&_core_if->core_global_regs->ghwcfg3);
++	_core_if->hwcfg4.d32 = ifxusb_rreg(&_core_if->core_global_regs->ghwcfg4);
++
++	IFX_DEBUGPL(DBG_CILV,"hwcfg1=%08x\n",_core_if->hwcfg1.d32);
++	IFX_DEBUGPL(DBG_CILV,"hwcfg2=%08x\n",_core_if->hwcfg2.d32);
++	IFX_DEBUGPL(DBG_CILV,"hwcfg3=%08x\n",_core_if->hwcfg3.d32);
++	IFX_DEBUGPL(DBG_CILV,"hwcfg4=%08x\n",_core_if->hwcfg4.d32);
++
++
++	#ifdef __DED_FIFO__
++		IFX_PRINT("Waiting for PHY Clock Lock!\n");
++		while(!( ifxusb_rreg(&_core_if->core_global_regs->grxfsiz) & (1<<9)))
++		{
++		}
++		IFX_PRINT("PHY Clock Locked!\n");
++		//ifxusb_clean_spram(_core_if,128*1024/4);
++	#endif
++
++	/* Create new workqueue and init works */
++#if 0
++	_core_if->wq_usb = create_singlethread_workqueue(_core_if->core_name);
++
++	if(_core_if->wq_usb == 0)
++	{
++		IFX_DEBUGPL(DBG_CIL, "Creation of wq_usb failed\n");
++		retval = -EINVAL;
++		goto fail;
++	}
++
++	#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++		INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change, core_if);
++		INIT_WORK(&core_if->w_wkp, w_wakeup_detected, core_if);
++	#else
++		INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change);
++		INIT_DELAYED_WORK(&core_if->w_wkp, w_wakeup_detected);
++	#endif
++#endif
++	return 0;
++
++fail:
++	if( reg_base  != NULL) iounmap(reg_base );
++	if( fifo_base != NULL) iounmap(fifo_base);
++	if( fifo_dbg  != NULL) iounmap(fifo_dbg );
++	return retval;
++}
++
++/*!
++ \brief This function free the mapped address in the IFXUSB CSR data structures.
++ \param _core_if Pointer of core_if structure
++ */
++void ifxusb_core_if_remove(ifxusb_core_if_t *_core_if)
++{
++	/* Disable all interrupts */
++	if( _core_if->core_global_regs  != NULL)
++	{
++		ifxusb_mreg( &_core_if->core_global_regs->gahbcfg, 1, 0);
++		ifxusb_wreg( &_core_if->core_global_regs->gintmsk, 0);
++	}
++
++	if( _core_if->core_global_regs  != NULL) iounmap(_core_if->core_global_regs );
++	if( _core_if->data_fifo[0]      != NULL) iounmap(_core_if->data_fifo[0]     );
++	if( _core_if->data_fifo_dbg     != NULL) iounmap(_core_if->data_fifo_dbg    );
++
++#if 0
++	if (_core_if->wq_usb)
++		destroy_workqueue(_core_if->wq_usb);
++#endif
++	memset(_core_if, 0, sizeof(ifxusb_core_if_t));
++}
++
++
++
++
++/*!
++ \brief This function enbles the controller's Global Interrupt in the AHB Config register.
++ \param _core_if Pointer of core_if structure
++ */
++void ifxusb_enable_global_interrupts( ifxusb_core_if_t *_core_if )
++{
++	gahbcfg_data_t ahbcfg ={ .d32 = 0};
++	ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
++	ifxusb_mreg(&_core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32);
++}
++
++/*!
++ \brief This function disables the controller's Global Interrupt in the AHB Config register.
++ \param _core_if Pointer of core_if structure
++ */
++void ifxusb_disable_global_interrupts( ifxusb_core_if_t *_core_if )
++{
++	gahbcfg_data_t ahbcfg ={ .d32 = 0};
++	ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
++	ifxusb_mreg(&_core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0);
++}
++
++
++
++
++/*!
++ \brief Flush Tx and Rx FIFO.
++ \param _core_if Pointer of core_if structure
++ */
++void ifxusb_flush_both_fifo( ifxusb_core_if_t *_core_if )
++{
++	ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
++	volatile grstctl_t greset ={ .d32 = 0};
++	int count = 0;
++
++	IFX_DEBUGPL((DBG_CIL|DBG_PCDV), "%s\n", __func__);
++	greset.b.rxfflsh = 1;
++	greset.b.txfflsh = 1;
++	greset.b.txfnum = 0x10;
++	greset.b.intknqflsh=1;
++	greset.b.hstfrm=1;
++	ifxusb_wreg( &global_regs->grstctl, greset.d32 );
++
++	do
++	{
++		greset.d32 = ifxusb_rreg( &global_regs->grstctl);
++		if (++count > 10000)
++		{
++			IFX_WARN("%s() HANG! GRSTCTL=%0x\n", __func__, greset.d32);
++			break;
++		}
++	} while (greset.b.rxfflsh == 1 || greset.b.txfflsh == 1);
++	/* Wait for 3 PHY Clocks*/
++	UDELAY(1);
++}
++
++/*!
++ \brief Flush a Tx FIFO.
++ \param _core_if Pointer of core_if structure
++ \param _num Tx FIFO to flush. ( 0x10 for ALL TX FIFO )
++ */
++void ifxusb_flush_tx_fifo( ifxusb_core_if_t *_core_if, const int _num )
++{
++	ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
++	volatile grstctl_t greset ={ .d32 = 0};
++	int count = 0;
++
++	IFX_DEBUGPL((DBG_CIL|DBG_PCDV), "Flush Tx FIFO %d\n", _num);
++
++	greset.b.intknqflsh=1;
++	greset.b.txfflsh = 1;
++	greset.b.txfnum = _num;
++	ifxusb_wreg( &global_regs->grstctl, greset.d32 );
++
++	do
++	{
++		greset.d32 = ifxusb_rreg( &global_regs->grstctl);
++		if (++count > 10000&&(_num==0 ||_num==0x10))
++		{
++			IFX_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n",
++			    __func__, greset.d32,
++			ifxusb_rreg( &global_regs->gnptxsts));
++			break;
++		}
++	} while (greset.b.txfflsh == 1);
++	/* Wait for 3 PHY Clocks*/
++	UDELAY(1);
++}
++
++
++/*!
++ \brief Flush Rx FIFO.
++ \param _core_if Pointer of core_if structure
++ */
++void ifxusb_flush_rx_fifo( ifxusb_core_if_t *_core_if )
++{
++	ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
++	volatile grstctl_t greset ={ .d32 = 0};
++	int count = 0;
++
++	IFX_DEBUGPL((DBG_CIL|DBG_PCDV), "%s\n", __func__);
++	greset.b.rxfflsh = 1;
++	ifxusb_wreg( &global_regs->grstctl, greset.d32 );
++
++	do
++	{
++		greset.d32 = ifxusb_rreg( &global_regs->grstctl);
++		if (++count > 10000)
++		{
++			IFX_WARN("%s() HANG! GRSTCTL=%0x\n", __func__, greset.d32);
++			break;
++		}
++	} while (greset.b.rxfflsh == 1);
++	/* Wait for 3 PHY Clocks*/
++	UDELAY(1);
++}
++
++
++#define SOFT_RESET_DELAY 100
++
++/*!
++ \brief Do a soft reset of the core.  Be careful with this because it
++        resets all the internal state machines of the core.
++ \param _core_if Pointer of core_if structure
++ */
++int ifxusb_core_soft_reset(ifxusb_core_if_t *_core_if)
++{
++	ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
++	volatile grstctl_t greset ={ .d32 = 0};
++	int count = 0;
++
++	IFX_DEBUGPL(DBG_CILV, "%s\n", __func__);
++	/* Wait for AHB master IDLE state. */
++	do
++	{
++		UDELAY(10);
++		greset.d32 = ifxusb_rreg( &global_regs->grstctl);
++		if (++count > 100000)
++		{
++			IFX_WARN("%s() HANG! AHB Idle GRSTCTL=%0x %x\n", __func__,
++			greset.d32, greset.b.ahbidle);
++			break;
++		}
++	} while (greset.b.ahbidle == 0);
++
++	UDELAY(1);
++
++	/* Core Soft Reset */
++	count = 0;
++	greset.b.csftrst = 1;
++	ifxusb_wreg( &global_regs->grstctl, greset.d32 );
++
++	#ifdef SOFT_RESET_DELAY
++		MDELAY(SOFT_RESET_DELAY);
++	#endif
++
++	do
++	{
++		UDELAY(10);
++		greset.d32 = ifxusb_rreg( &global_regs->grstctl);
++		if (++count > 100000)
++		{
++			IFX_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", __func__, greset.d32);
++			return -1;
++		}
++	} while (greset.b.csftrst == 1);
++
++	#ifdef SOFT_RESET_DELAY
++		MDELAY(SOFT_RESET_DELAY);
++	#endif
++
++
++	#if defined(__IS_VR9__)
++		if(_core_if->core_no==0)
++		{
++			set_bit (4, VR9_RCU_USBRESET2);
++			MDELAY(50);
++			clear_bit (4, VR9_RCU_USBRESET2);
++		}
++		else
++		{
++			set_bit (5, VR9_RCU_USBRESET2);
++			MDELAY(50);
++			clear_bit (5, VR9_RCU_USBRESET2);
++		}
++		MDELAY(50);
++	#endif //defined(__IS_VR9__)
++
++	IFX_PRINT("USB core #%d soft-reset\n",_core_if->core_no);
++
++	return 0;
++}
++
++/*!
++ \brief Turn on the USB Core Power
++ \param _core_if Pointer of core_if structure
++*/
++void ifxusb_power_on (ifxusb_core_if_t *_core_if)
++{
++	struct clk *clk0 = clk_get_sys("usb0", NULL);
++	struct clk *clk1 = clk_get_sys("usb1", NULL);
++	// set clock gating
++	IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++	#if defined(__UEIP__)
++
++		#if defined(__IS_TWINPASS) || defined(__IS_DANUBE__)
++			set_bit (4, (volatile unsigned long *)DANUBE_CGU_IFCCR);
++			set_bit (5, (volatile unsigned long *)DANUBE_CGU_IFCCR);
++		#endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++		#if defined(__IS_AMAZON_SE__)
++		//	clear_bit (4, (volatile unsigned long *)AMAZON_SE_CGU_IFCCR);
++			clear_bit (5, (volatile unsigned long *)AMAZON_SE_CGU_IFCCR);
++		#endif //defined(__IS_AMAZON_SE__)
++		#if defined(__IS_AR9__)
++			set_bit (0, (volatile unsigned long *)AR9_CGU_IFCCR);
++			set_bit (1, (volatile unsigned long *)AR9_CGU_IFCCR);
++		#endif //defined(__IS_AR9__)
++		#if defined(__IS_VR9__)
++//			set_bit (0, (volatile unsigned long *)VR9_CGU_IFCCR);
++//			set_bit (1, (volatile unsigned long *)VR9_CGU_IFCCR);
++		#endif //defined(__IS_VR9__)
++
++		MDELAY(50);
++
++		// set power
++		#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
++			USB_CTRL_PMU_SETUP(IFX_PMU_ENABLE);
++			//#if defined(__IS_TWINPASS__)
++			//	ifxusb_enable_afe_oc();
++			//#endif
++		#endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
++		#if defined(__IS_AR9__) || defined(__IS_VR9__)
++			if(_core_if->core_no==0)
++				clk_enable(clk0);
++//				USB0_CTRL_PMU_SETUP(IFX_PMU_ENABLE);
++			else
++				clk_enable(clk1);
++//				USB1_CTRL_PMU_SETUP(IFX_PMU_ENABLE);
++		#endif //defined(__IS_AR9__) || defined(__IS_VR9__)
++
++		if(_core_if->core_global_regs)
++		{
++			// PHY configurations.
++			#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++				ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++			#endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++			#if defined(__IS_AMAZON_SE__)
++				ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++			#endif //defined(__IS_AMAZON_SE__)
++			#if defined(__IS_AR9__)
++				ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++			#endif //defined(__IS_AR9__)
++			#if defined(__IS_VR9__)
++				//ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++			#endif //defined(__IS_VR9__)
++		}
++	#else //defined(__UEIP__)
++		#if defined(__IS_TWINPASS) || defined(__IS_DANUBE__)
++			set_bit (4, (volatile unsigned long *)DANUBE_CGU_IFCCR);
++			set_bit (5, (volatile unsigned long *)DANUBE_CGU_IFCCR);
++		#endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++		#if defined(__IS_AMAZON_SE__)
++		//	clear_bit (4, (volatile unsigned long *)AMAZON_SE_CGU_IFCCR);
++			clear_bit (5, (volatile unsigned long *)AMAZON_SE_CGU_IFCCR);
++		#endif //defined(__IS_AMAZON_SE__)
++		#if defined(__IS_AR9__)
++			set_bit (0, (volatile unsigned long *)AMAZON_S_CGU_IFCCR);
++			set_bit (1, (volatile unsigned long *)AMAZON_S_CGU_IFCCR);
++		#endif //defined(__IS_AR9__)
++
++		MDELAY(50);
++
++		// set power
++		#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++			clear_bit (6,  (volatile unsigned long *)DANUBE_PMU_PWDCR);//USB
++			clear_bit (9,  (volatile unsigned long *)DANUBE_PMU_PWDCR);//DSL
++			clear_bit (15, (volatile unsigned long *)DANUBE_PMU_PWDCR);//AHB
++			#if defined(__IS_TWINPASS__)
++				ifxusb_enable_afe_oc();
++			#endif
++		#endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++		#if defined(__IS_AMAZON_SE__)
++			clear_bit (6,  (volatile unsigned long *)AMAZON_SE_PMU_PWDCR);
++			clear_bit (9,  (volatile unsigned long *)AMAZON_SE_PMU_PWDCR);
++			clear_bit (15, (volatile unsigned long *)AMAZON_SE_PMU_PWDCR);
++		#endif //defined(__IS_AMAZON_SE__)
++		#if defined(__IS_AR9__)
++			if(_core_if->core_no==0)
++				clear_bit (6, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//USB
++			else
++				clear_bit (27, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//USB
++			clear_bit (9, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//DSL
++			clear_bit (15, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//AHB
++		#endif //defined(__IS_AR9__)
++
++		if(_core_if->core_global_regs)
++		{
++			// PHY configurations.
++			#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++				ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++			#endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++			#if defined(__IS_AMAZON_SE__)
++				ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++			#endif //defined(__IS_AMAZON_SE__)
++			#if defined(__IS_AR9__)
++				ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++			#endif //defined(__IS_AR9__)
++		}
++
++	#endif //defined(__UEIP__)
++}
++
++/*!
++ \brief Turn off the USB Core Power
++ \param _core_if Pointer of core_if structure
++*/
++void ifxusb_power_off (ifxusb_core_if_t *_core_if)
++{
++	struct clk *clk0 = clk_get_sys("usb0", NULL);
++	struct clk *clk1 = clk_get_sys("usb1", NULL);
++	ifxusb_phy_power_off (_core_if);
++
++	// set power
++	#if defined(__UEIP__)
++		#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
++			USB_CTRL_PMU_SETUP(IFX_PMU_DISABLE);
++		#endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
++		#if defined(__IS_AR9__) || defined(__IS_VR9__)
++			if(_core_if->core_no==0)
++				clk_disable(clk0);
++				//USB0_CTRL_PMU_SETUP(IFX_PMU_DISABLE);
++			else
++				clk_disable(clk1);
++				//USB1_CTRL_PMU_SETUP(IFX_PMU_DISABLE);
++		#endif //defined(__IS_AR9__) || defined(__IS_VR9__)
++	#else //defined(__UEIP__)
++		#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++			set_bit (6, (volatile unsigned long *)DANUBE_PMU_PWDCR);//USB
++		#endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++		#if defined(__IS_AMAZON_SE__)
++			set_bit (6, (volatile unsigned long *)AMAZON_SE_PMU_PWDCR);//USB
++		#endif //defined(__IS_AMAZON_SE__)
++		#if defined(__IS_AR9__)
++			if(_core_if->core_no==0)
++				set_bit (6, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//USB
++			else
++				set_bit (27, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//USB
++		#endif //defined(__IS_AR9__)
++	#endif //defined(__UEIP__)
++}
++
++/*!
++ \brief Turn on the USB PHY Power
++ \param _core_if Pointer of core_if structure
++*/
++void ifxusb_phy_power_on (ifxusb_core_if_t *_core_if)
++{
++	struct clk *clk0 = clk_get_sys("usb0", NULL);
++	struct clk *clk1 = clk_get_sys("usb1", NULL);
++	#if defined(__UEIP__)
++		if(_core_if->core_global_regs)
++		{
++			#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++				ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++			#endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++			#if defined(__IS_AMAZON_SE__)
++				ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++			#endif //defined(__IS_AMAZON_SE__)
++			#if defined(__IS_AR9__)
++				ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++			#endif //defined(__IS_AR9__)
++			#if defined(__IS_VR9_S__)
++				if(_core_if->core_no==0)
++					set_bit (0, VR9_RCU_USB_ANA_CFG1A);
++				else
++					set_bit (0, VR9_RCU_USB_ANA_CFG1B);
++			#endif //defined(__IS_VR9__)
++		}
++
++		#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
++			USB_PHY_PMU_SETUP(IFX_PMU_ENABLE);
++		#endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
++		#if defined(__IS_AR9__) || defined(__IS_VR9__)
++			if(_core_if->core_no==0)
++				clk_enable(clk0);
++				//USB0_PHY_PMU_SETUP(IFX_PMU_ENABLE);
++			else
++				clk_enable(clk1);
++				//USB1_PHY_PMU_SETUP(IFX_PMU_ENABLE);
++		#endif //defined(__IS_AR9__) || defined(__IS_VR9__)
++
++		// PHY configurations.
++		if(_core_if->core_global_regs)
++		{
++			#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++				ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++			#endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++			#if defined(__IS_AMAZON_SE__)
++				ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++			#endif //defined(__IS_AMAZON_SE__)
++			#if defined(__IS_AR9__)
++				ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++			#endif //defined(__IS_AR9__)
++			#if defined(__IS_VR9_S__)
++				if(_core_if->core_no==0)
++					set_bit (0, VR9_RCU_USB_ANA_CFG1A);
++				else
++					set_bit (0, VR9_RCU_USB_ANA_CFG1B);
++			#endif //defined(__IS_VR9__)
++		}
++	#else //defined(__UEIP__)
++		// PHY configurations.
++		if(_core_if->core_global_regs)
++		{
++			#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++				ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++			#endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++			#if defined(__IS_AMAZON_SE__)
++				ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++			#endif //defined(__IS_AMAZON_SE__)
++			#if defined(__IS_AR9__)
++				ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++			#endif //defined(__IS_AR9__)
++		}
++
++		#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++			clear_bit (0,  (volatile unsigned long *)DANUBE_PMU_PWDCR);//PHY
++		#endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++		#if defined(__IS_AMAZON_SE__)
++			clear_bit (0,  (volatile unsigned long *)AMAZON_SE_PMU_PWDCR);
++		#endif //defined(__IS_AMAZON_SE__)
++		#if defined(__IS_AR9__)
++			if(_core_if->core_no==0)
++				clear_bit (0,  (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//PHY
++			else
++				clear_bit (26, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//PHY
++		#endif //defined(__IS_AR9__)
++
++		// PHY configurations.
++		if(_core_if->core_global_regs)
++		{
++			#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++				ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++			#endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++			#if defined(__IS_AMAZON_SE__)
++				ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++			#endif //defined(__IS_AMAZON_SE__)
++			#if defined(__IS_AR9__)
++				ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++			#endif //defined(__IS_AR9__)
++		}
++	#endif //defined(__UEIP__)
++}
++
++
++/*!
++ \brief Turn off the USB PHY Power
++ \param _core_if Pointer of core_if structure
++*/
++void ifxusb_phy_power_off (ifxusb_core_if_t *_core_if)
++{
++	struct clk *clk0 = clk_get_sys("usb0", NULL);
++	struct clk *clk1 = clk_get_sys("usb1", NULL);
++	#if defined(__UEIP__)
++		#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
++			USB_PHY_PMU_SETUP(IFX_PMU_DISABLE);
++		#endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
++		#if defined(__IS_AR9__) || defined(__IS_VR9__)
++			if(_core_if->core_no==0)
++				clk_disable(clk0);
++				//USB0_PHY_PMU_SETUP(IFX_PMU_DISABLE);
++			else
++				clk_disable(clk1);
++				//USB1_PHY_PMU_SETUP(IFX_PMU_DISABLE);
++		#endif // defined(__IS_AR9__) || defined(__IS_VR9__)
++	#else //defined(__UEIP__)
++		#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++			set_bit (0, (volatile unsigned long *)DANUBE_PMU_PWDCR);//PHY
++		#endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++		#if defined(__IS_AMAZON_SE__)
++			set_bit (0, (volatile unsigned long *)AMAZON_SE_PMU_PWDCR);//PHY
++		#endif //defined(__IS_AMAZON_SE__)
++		#if defined(__IS_AR9__)
++			if(_core_if->core_no==0)
++				set_bit (0, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//PHY
++			else
++				set_bit (26, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//PHY
++		#endif //defined(__IS_AR9__)
++	#endif //defined(__UEIP__)
++}
++
++
++/*!
++ \brief Reset on the USB Core RCU
++ \param _core_if Pointer of core_if structure
++ */
++#if defined(__IS_VR9__)
++	int already_hard_reset=0;
++#endif
++void ifxusb_hard_reset(ifxusb_core_if_t *_core_if)
++{
++	#if defined(__UEIP__)
++		#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++			#if defined (__IS_HOST__)
++				clear_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
++			#elif defined (__IS_DEVICE__)
++				set_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
++			#endif
++		#endif //defined(__IS_AMAZON_SE__)
++
++		#if defined(__IS_AMAZON_SE__)
++			#if defined (__IS_HOST__)
++				clear_bit (AMAZON_SE_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
++			#elif defined (__IS_DEVICE__)
++				set_bit (AMAZON_SE_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
++			#endif
++		#endif //defined(__IS_AMAZON_SE__)
++
++		#if defined(__IS_AR9__)
++			if(_core_if->core_no==0)
++			{
++				#if defined (__IS_HOST__)
++					clear_bit (AR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)AR9_RCU_USB1CFG);
++				#elif defined (__IS_DEVICE__)
++					set_bit (AR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)AR9_RCU_USB1CFG);
++				#endif
++			}
++			else
++			{
++				#if defined (__IS_HOST__)
++					clear_bit (AR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)AR9_RCU_USB2CFG);
++				#elif defined (__IS_DEVICE__)
++					set_bit (AR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)AR9_RCU_USB2CFG);
++				#endif
++			}
++		#endif //defined(__IS_AR9__)
++
++		#if defined(__IS_VR9__)
++			if(_core_if->core_no==0)
++			{
++				#if defined (__IS_HOST__)
++					clear_bit (VR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)VR9_RCU_USB1CFG);
++				#elif defined (__IS_DEVICE__)
++					set_bit (VR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)VR9_RCU_USB1CFG);
++				#endif
++			}
++			else
++			{
++				#if defined (__IS_HOST__)
++					clear_bit (VR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)VR9_RCU_USB2CFG);
++				#elif defined (__IS_DEVICE__)
++					set_bit (VR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)VR9_RCU_USB2CFG);
++				#endif
++			}
++		#endif //defined(__IS_VR9__)
++
++
++		// set the HC's byte-order to big-endian
++		#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++			set_bit   (DANUBE_USBCFG_HOST_END_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
++			clear_bit (DANUBE_USBCFG_SLV_END_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
++		#endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++		#if defined(__IS_AMAZON_SE__)
++			set_bit (AMAZON_SE_USBCFG_HOST_END_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
++			clear_bit (AMAZON_SE_USBCFG_SLV_END_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
++		#endif //defined(__IS_AMAZON_SE__)
++		#if defined(__IS_AR9__)
++			if(_core_if->core_no==0)
++			{
++				set_bit   (AR9_USBCFG_HOST_END_BIT, (volatile unsigned long *)AR9_RCU_USB1CFG);
++				clear_bit (AR9_USBCFG_SLV_END_BIT, (volatile unsigned long *)AR9_RCU_USB1CFG);
++			}
++			else
++			{
++				set_bit   (AR9_USBCFG_HOST_END_BIT, (volatile unsigned long *)AR9_RCU_USB2CFG);
++				clear_bit (AR9_USBCFG_SLV_END_BIT, (volatile unsigned long *)AR9_RCU_USB2CFG);
++			}
++		#endif //defined(__IS_AR9__)
++		#if defined(__IS_VR9__)
++			if(_core_if->core_no==0)
++			{
++				set_bit   (VR9_USBCFG_HOST_END_BIT, (volatile unsigned long *)VR9_RCU_USB1CFG);
++				clear_bit (VR9_USBCFG_SLV_END_BIT, (volatile unsigned long *)VR9_RCU_USB1CFG);
++			}
++			else
++			{
++				set_bit   (VR9_USBCFG_HOST_END_BIT, (volatile unsigned long *)VR9_RCU_USB2CFG);
++				clear_bit (VR9_USBCFG_SLV_END_BIT, (volatile unsigned long *)VR9_RCU_USB2CFG);
++			}
++		#endif //defined(__IS_VR9__)
++
++		#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++		    set_bit (4, DANUBE_RCU_RESET);
++			MDELAY(500);
++		    clear_bit (4, DANUBE_RCU_RESET);
++		#endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++
++		#if defined(__IS_AMAZON_SE__)
++		    set_bit (4, AMAZON_SE_RCU_RESET);
++			MDELAY(500);
++		    clear_bit (4, AMAZON_SE_RCU_RESET);
++			MDELAY(500);
++		#endif //defined(__IS_AMAZON_SE__)
++
++		#if defined(__IS_AR9__)
++			if(_core_if->core_no==0)
++			{
++				set_bit (4, AR9_RCU_USBRESET);
++				MDELAY(500);
++				clear_bit (4, AR9_RCU_USBRESET);
++			}
++			else
++			{
++				set_bit (28, AR9_RCU_USBRESET);
++				MDELAY(500);
++				clear_bit (28, AR9_RCU_USBRESET);
++			}
++			MDELAY(500);
++		#endif //defined(__IS_AR9__)
++		#if defined(__IS_VR9__)
++			if(!already_hard_reset)
++			{
++				set_bit (4, VR9_RCU_USBRESET);
++				MDELAY(500);
++				clear_bit (4, VR9_RCU_USBRESET);
++				MDELAY(500);
++				already_hard_reset=1;
++			}
++		#endif //defined(__IS_VR9__)
++
++		#if defined(__IS_TWINPASS__)
++			ifxusb_enable_afe_oc();
++		#endif
++
++		if(_core_if->core_global_regs)
++		{
++			// PHY configurations.
++			#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++				ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++			#endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++			#if defined(__IS_AMAZON_SE__)
++				ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++			#endif //defined(__IS_AMAZON_SE__)
++			#if defined(__IS_AR9__)
++				ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++			#endif //defined(__IS_AR9__)
++			#if defined(__IS_VR9__)
++			//	ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++			#endif //defined(__IS_VR9__)
++		}
++	#else //defined(__UEIP__)
++		#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++			#if defined (__IS_HOST__)
++				clear_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
++			#elif defined (__IS_DEVICE__)
++				set_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
++			#endif
++		#endif //defined(__IS_AMAZON_SE__)
++
++		#if defined(__IS_AMAZON_SE__)
++			#if defined (__IS_HOST__)
++				clear_bit (AMAZON_SE_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
++			#elif defined (__IS_DEVICE__)
++				set_bit (AMAZON_SE_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
++			#endif
++		#endif //defined(__IS_AMAZON_SE__)
++
++		#if defined(__IS_AR9__)
++			if(_core_if->core_no==0)
++			{
++				#if defined (__IS_HOST__)
++					clear_bit (AMAZON_S_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB1CFG);
++				#elif defined (__IS_DEVICE__)
++					set_bit (AMAZON_S_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB1CFG);
++				#endif
++			}
++			else
++			{
++				#if defined (__IS_HOST__)
++					clear_bit (AMAZON_S_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB2CFG);
++				#elif defined (__IS_DEVICE__)
++					set_bit (AMAZON_S_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB2CFG);
++				#endif
++			}
++		#endif //defined(__IS_AR9__)
++
++		// set the HC's byte-order to big-endian
++		#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++			set_bit   (DANUBE_USBCFG_HOST_END_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
++			clear_bit (DANUBE_USBCFG_SLV_END_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
++		#endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++		#if defined(__IS_AMAZON_SE__)
++			set_bit (AMAZON_SE_USBCFG_HOST_END_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
++			clear_bit (AMAZON_SE_USBCFG_SLV_END_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
++		#endif //defined(__IS_AMAZON_SE__)
++		#if defined(__IS_AR9__)
++			if(_core_if->core_no==0)
++			{
++				set_bit   (AMAZON_S_USBCFG_HOST_END_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB1CFG);
++				clear_bit (AMAZON_S_USBCFG_SLV_END_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB1CFG);
++			}
++			else
++			{
++				set_bit   (AMAZON_S_USBCFG_HOST_END_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB2CFG);
++				clear_bit (AMAZON_S_USBCFG_SLV_END_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB2CFG);
++			}
++		#endif //defined(__IS_AR9__)
++
++		#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++		    set_bit (4, DANUBE_RCU_RESET);
++		#endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++		#if defined(__IS_AMAZON_SE__)
++		    set_bit (4, AMAZON_SE_RCU_RESET);
++		#endif //defined(__IS_AMAZON_SE__)
++		#if defined(__IS_AR9__)
++			if(_core_if->core_no==0)
++			{
++				set_bit (4, AMAZON_S_RCU_USBRESET);
++			}
++			else
++			{
++				set_bit (28, AMAZON_S_RCU_USBRESET);
++			}
++		#endif //defined(__IS_AR9__)
++
++		MDELAY(500);
++
++		#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++		    clear_bit (4, DANUBE_RCU_RESET);
++		#endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++		#if defined(__IS_AMAZON_SE__)
++		    clear_bit (4, AMAZON_SE_RCU_RESET);
++		#endif //defined(__IS_AMAZON_SE__)
++		#if defined(__IS_AR9__)
++			if(_core_if->core_no==0)
++			{
++				clear_bit (4, AMAZON_S_RCU_USBRESET);
++			}
++			else
++			{
++				clear_bit (28, AMAZON_S_RCU_USBRESET);
++			}
++		#endif //defined(__IS_AR9__)
++
++		MDELAY(500);
++
++		#if defined(__IS_TWINPASS__)
++			ifxusb_enable_afe_oc();
++		#endif
++
++		if(_core_if->core_global_regs)
++		{
++			// PHY configurations.
++			#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++				ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++			#endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++			#if defined(__IS_AMAZON_SE__)
++				ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++			#endif //defined(__IS_AMAZON_SE__)
++			#if defined(__IS_AR9__)
++				ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++			#endif //defined(__IS_AR9__)
++		}
++	#endif //defined(__UEIP__)
++}
++
++#if defined(__GADGET_LED__) || defined(__HOST_LED__)
++	#if defined(__UEIP__)
++		static void *g_usb_led_trigger  = NULL;
++	#endif
++
++	void ifxusb_led_init(ifxusb_core_if_t *_core_if)
++	{
++		#if defined(__UEIP__)
++			if ( !g_usb_led_trigger )
++			{
++				ifx_led_trigger_register("usb_link", &g_usb_led_trigger);
++				if ( g_usb_led_trigger != NULL )
++				{
++					struct ifx_led_trigger_attrib attrib = {0};
++					attrib.delay_on     = 250;
++					attrib.delay_off    = 250;
++					attrib.timeout      = 2000;
++					attrib.def_value    = 1;
++					attrib.flags        = IFX_LED_TRIGGER_ATTRIB_DELAY_ON | IFX_LED_TRIGGER_ATTRIB_DELAY_OFF | IFX_LED_TRIGGER_ATTRIB_TIMEOUT | IFX_LED_TRIGGER_ATTRIB_DEF_VALUE;
++					IFX_DEBUGP("Reg USB LED!!\n");
++					ifx_led_trigger_set_attrib(g_usb_led_trigger, &attrib);
++				}
++			}
++		#endif //defined(__UEIP__)
++	}
++
++	void ifxusb_led_free(ifxusb_core_if_t *_core_if)
++	{
++		#if defined(__UEIP__)
++			if ( g_usb_led_trigger )
++			{
++			    ifx_led_trigger_deregister(g_usb_led_trigger);
++			    g_usb_led_trigger = NULL;
++			}
++		#endif //defined(__UEIP__)
++	}
++
++	/*!
++	   \brief Turn off the USB 5V VBus Power
++	   \param _core_if        Pointer of core_if structure
++	 */
++	void ifxusb_led(ifxusb_core_if_t *_core_if)
++	{
++		#if defined(__UEIP__)
++			if(g_usb_led_trigger)
++				ifx_led_trigger_activate(g_usb_led_trigger);
++		#else
++		#endif //defined(__UEIP__)
++	}
++#endif // defined(__GADGET_LED__) || defined(__HOST_LED__)
++
++
++
++#if defined(__IS_HOST__) && defined(__DO_OC_INT__) && defined(__DO_OC_INT_ENABLE__)
++/*!
++ \brief Turn on the OC Int
++ */
++	void ifxusb_oc_int_on()
++	{
++		#if defined(__UEIP__)
++		#else
++			#if defined(__IS_TWINPASS__)
++				irq_enable(DANUBE_USB_OC_INT);
++			#endif
++		#endif //defined(__UEIP__)
++	}
++/*!
++ \brief Turn off the OC Int
++ */
++	void ifxusb_oc_int_off()
++	{
++		#if defined(__UEIP__)
++		#else
++			#if defined(__IS_TWINPASS__)
++				irq_disable(DANUBE_USB_OC_INT);
++			#endif
++		#endif //defined(__UEIP__)
++	}
++#endif //defined(__IS_HOST__) && defined(__DO_OC_INT__) && defined(__DO_OC_INT_ENABLE__)
++
++/* internal routines for debugging */
++void ifxusb_dump_msg(const u8 *buf, unsigned int length)
++{
++#ifdef __DEBUG__
++	unsigned int	start, num, i;
++	char		line[52], *p;
++
++	if (length >= 512)
++		return;
++	start = 0;
++	while (length > 0)
++	{
++		num = min(length, 16u);
++		p = line;
++		for (i = 0; i < num; ++i)
++		{
++			if (i == 8)
++				*p++ = ' ';
++			sprintf(p, " %02x", buf[i]);
++			p += 3;
++		}
++		*p = 0;
++		IFX_PRINT( "%6x: %s\n", start, line);
++		buf += num;
++		start += num;
++		length -= num;
++	}
++#endif
++}
++
++/* This functions reads the SPRAM and prints its content */
++void ifxusb_dump_spram(ifxusb_core_if_t *_core_if)
++{
++#ifdef __ENABLE_DUMP__
++	volatile uint8_t *addr, *start_addr, *end_addr;
++	uint32_t size;
++	IFX_PRINT("SPRAM Data:\n");
++	start_addr = (void*)_core_if->core_global_regs;
++	IFX_PRINT("Base Address: 0x%8X\n", (uint32_t)start_addr);
++
++	start_addr = (void*)_core_if->data_fifo_dbg;
++	IFX_PRINT("Starting Address: 0x%8X\n", (uint32_t)start_addr);
++
++	size=_core_if->hwcfg3.b.dfifo_depth;
++	size<<=2;
++	size+=0x200;
++	size&=0x0003FFFC;
++
++	end_addr = (void*)_core_if->data_fifo_dbg;
++	end_addr += size;
++
++	for(addr = start_addr; addr < end_addr; addr+=16)
++	{
++		IFX_PRINT("0x%8X:\t%02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X\n", (uint32_t)addr,
++			addr[ 0], addr[ 1], addr[ 2], addr[ 3],
++			addr[ 4], addr[ 5], addr[ 6], addr[ 7],
++			addr[ 8], addr[ 9], addr[10], addr[11],
++			addr[12], addr[13], addr[14], addr[15]
++			);
++	}
++	return;
++#endif //__ENABLE_DUMP__
++}
++
++
++
++
++/* This function reads the core global registers and prints them */
++void ifxusb_dump_registers(ifxusb_core_if_t *_core_if)
++{
++#ifdef __ENABLE_DUMP__
++	int i;
++	volatile uint32_t *addr;
++	#ifdef __IS_DEVICE__
++		volatile uint32_t *addri,*addro;
++	#endif
++
++	IFX_PRINT("Core Global Registers\n");
++	addr=&_core_if->core_global_regs->gotgctl;
++	IFX_PRINT("GOTGCTL   @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++	addr=&_core_if->core_global_regs->gotgint;
++	IFX_PRINT("GOTGINT   @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++	addr=&_core_if->core_global_regs->gahbcfg;
++	IFX_PRINT("GAHBCFG   @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++	addr=&_core_if->core_global_regs->gusbcfg;
++	IFX_PRINT("GUSBCFG   @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++	addr=&_core_if->core_global_regs->grstctl;
++	IFX_PRINT("GRSTCTL   @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++	addr=&_core_if->core_global_regs->gintsts;
++	IFX_PRINT("GINTSTS   @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++	addr=&_core_if->core_global_regs->gintmsk;
++	IFX_PRINT("GINTMSK   @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++	addr=&_core_if->core_global_regs->gi2cctl;
++	IFX_PRINT("GI2CCTL   @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++	addr=&_core_if->core_global_regs->gpvndctl;
++	IFX_PRINT("GPVNDCTL  @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++	addr=&_core_if->core_global_regs->ggpio;
++	IFX_PRINT("GGPIO     @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++	addr=&_core_if->core_global_regs->guid;
++	IFX_PRINT("GUID      @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++	addr=&_core_if->core_global_regs->gsnpsid;
++	IFX_PRINT("GSNPSID   @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++	addr=&_core_if->core_global_regs->ghwcfg1;
++	IFX_PRINT("GHWCFG1   @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++	addr=&_core_if->core_global_regs->ghwcfg2;
++	IFX_PRINT("GHWCFG2   @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++	addr=&_core_if->core_global_regs->ghwcfg3;
++	IFX_PRINT("GHWCFG3   @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++	addr=&_core_if->core_global_regs->ghwcfg4;
++	IFX_PRINT("GHWCFG4   @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++
++	addr=_core_if->pcgcctl;
++	IFX_PRINT("PCGCCTL   @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++
++	addr=&_core_if->core_global_regs->grxfsiz;
++	IFX_PRINT("GRXFSIZ   @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++
++	#ifdef __IS_HOST__
++		addr=&_core_if->core_global_regs->gnptxfsiz;
++		IFX_PRINT("GNPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++		addr=&_core_if->core_global_regs->hptxfsiz;
++		IFX_PRINT("HPTXFSIZ  @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++	#endif //__IS_HOST__
++
++	#ifdef __IS_DEVICE__
++		#ifdef __DED_FIFO__
++			addr=&_core_if->core_global_regs->gnptxfsiz;
++			IFX_PRINT("GNPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++			for (i=0; i<= _core_if->hwcfg4.b.num_in_eps; i++)
++			{
++				addr=&_core_if->core_global_regs->dptxfsiz_dieptxf[i];
++				IFX_PRINT("DPTXFSIZ[%d] @0x%08X : 0x%08X\n",i,(uint32_t)addr,ifxusb_rreg(addr));
++			}
++		#else
++			addr=&_core_if->core_global_regs->gnptxfsiz;
++			IFX_PRINT("TXFSIZ[00] @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++			for (i=0; i< _core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
++			{
++				addr=&_core_if->core_global_regs->dptxfsiz_dieptxf[i];
++				IFX_PRINT("TXFSIZ[%02d] @0x%08X : 0x%08X\n",i+1,(uint32_t)addr,ifxusb_rreg(addr));
++			}
++		#endif
++	#endif //__IS_DEVICE__
++
++	#ifdef __IS_HOST__
++		IFX_PRINT("Host Global Registers\n");
++		addr=&_core_if->host_global_regs->hcfg;
++		IFX_PRINT("HCFG		 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++		addr=&_core_if->host_global_regs->hfir;
++		IFX_PRINT("HFIR		 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++		addr=&_core_if->host_global_regs->hfnum;
++		IFX_PRINT("HFNUM	 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++		addr=&_core_if->host_global_regs->hptxsts;
++		IFX_PRINT("HPTXSTS	 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++		addr=&_core_if->host_global_regs->haint;
++		IFX_PRINT("HAINT	 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++		addr=&_core_if->host_global_regs->haintmsk;
++		IFX_PRINT("HAINTMSK	 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++		addr= _core_if->hprt0;
++		IFX_PRINT("HPRT0	 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++
++		for (i=0; i<MAX_EPS_CHANNELS; i++)
++		{
++			IFX_PRINT("Host Channel %d Specific Registers\n", i);
++			addr=&_core_if->hc_regs[i]->hcchar;
++			IFX_PRINT("HCCHAR	 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++			addr=&_core_if->hc_regs[i]->hcsplt;
++			IFX_PRINT("HCSPLT	 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++			addr=&_core_if->hc_regs[i]->hcint;
++			IFX_PRINT("HCINT	 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++			addr=&_core_if->hc_regs[i]->hcintmsk;
++			IFX_PRINT("HCINTMSK	 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++			addr=&_core_if->hc_regs[i]->hctsiz;
++			IFX_PRINT("HCTSIZ	 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++			addr=&_core_if->hc_regs[i]->hcdma;
++			IFX_PRINT("HCDMA	 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++		}
++	#endif //__IS_HOST__
++
++	#ifdef __IS_DEVICE__
++		IFX_PRINT("Device Global Registers\n");
++		addr=&_core_if->dev_global_regs->dcfg;
++		IFX_PRINT("DCFG		 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++		addr=&_core_if->dev_global_regs->dctl;
++		IFX_PRINT("DCTL		 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++		addr=&_core_if->dev_global_regs->dsts;
++		IFX_PRINT("DSTS		 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++		addr=&_core_if->dev_global_regs->diepmsk;
++		IFX_PRINT("DIEPMSK	 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++		addr=&_core_if->dev_global_regs->doepmsk;
++		IFX_PRINT("DOEPMSK	 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++		addr=&_core_if->dev_global_regs->daintmsk;
++		IFX_PRINT("DAINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++		addr=&_core_if->dev_global_regs->daint;
++		IFX_PRINT("DAINT	 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++		addr=&_core_if->dev_global_regs->dvbusdis;
++		IFX_PRINT("DVBUSID	 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++		addr=&_core_if->dev_global_regs->dvbuspulse;
++		IFX_PRINT("DVBUSPULSE	@0x%08X : 0x%08X\n", (uint32_t)addr,ifxusb_rreg(addr));
++
++		addr=&_core_if->dev_global_regs->dtknqr1;
++		IFX_PRINT("DTKNQR1	 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++		if (_core_if->hwcfg2.b.dev_token_q_depth > 6) {
++			addr=&_core_if->dev_global_regs->dtknqr2;
++			IFX_PRINT("DTKNQR2	 @0x%08X : 0x%08X\n", (uint32_t)addr,ifxusb_rreg(addr));
++		}
++
++		if (_core_if->hwcfg2.b.dev_token_q_depth > 14)
++		{
++			addr=&_core_if->dev_global_regs->dtknqr3_dthrctl;
++			IFX_PRINT("DTKNQR3_DTHRCTL	 @0x%08X : 0x%08X\n", (uint32_t)addr, ifxusb_rreg(addr));
++		}
++
++		if (_core_if->hwcfg2.b.dev_token_q_depth > 22)
++		{
++			addr=&_core_if->dev_global_regs->dtknqr4_fifoemptymsk;
++			IFX_PRINT("DTKNQR4	 @0x%08X : 0x%08X\n", (uint32_t)addr, ifxusb_rreg(addr));
++		}
++
++		//for (i=0; i<= MAX_EPS_CHANNELS; i++)
++		//for (i=0; i<= 10; i++)
++		for (i=0; i<= 3; i++)
++		{
++			IFX_PRINT("Device EP %d Registers\n", i);
++			addri=&_core_if->in_ep_regs[i]->diepctl;addro=&_core_if->out_ep_regs[i]->doepctl;
++			IFX_PRINT("DEPCTL	 I: 0x%08X O: 0x%08X\n",ifxusb_rreg(addri),ifxusb_rreg(addro));
++			                                        addro=&_core_if->out_ep_regs[i]->doepfn;
++			IFX_PRINT("DEPFN	 I:            O: 0x%08X\n",ifxusb_rreg(addro));
++			addri=&_core_if->in_ep_regs[i]->diepint;addro=&_core_if->out_ep_regs[i]->doepint;
++			IFX_PRINT("DEPINT	 I: 0x%08X O: 0x%08X\n",ifxusb_rreg(addri),ifxusb_rreg(addro));
++			addri=&_core_if->in_ep_regs[i]->dieptsiz;addro=&_core_if->out_ep_regs[i]->doeptsiz;
++			IFX_PRINT("DETSIZ	 I: 0x%08X O: 0x%08X\n",ifxusb_rreg(addri),ifxusb_rreg(addro));
++			addri=&_core_if->in_ep_regs[i]->diepdma;addro=&_core_if->out_ep_regs[i]->doepdma;
++			IFX_PRINT("DEPDMA	 I: 0x%08X O: 0x%08X\n",ifxusb_rreg(addri),ifxusb_rreg(addro));
++			addri=&_core_if->in_ep_regs[i]->dtxfsts;
++			IFX_PRINT("DTXFSTS	 I: 0x%08X\n",ifxusb_rreg(addri)                   );
++			addri=&_core_if->in_ep_regs[i]->diepdmab;addro=&_core_if->out_ep_regs[i]->doepdmab;
++			IFX_PRINT("DEPDMAB	 I: 0x%08X O: 0x%08X\n",ifxusb_rreg(addri),ifxusb_rreg(addro));
++		}
++	#endif //__IS_DEVICE__
++#endif //__ENABLE_DUMP__
++}
++
++void ifxusb_clean_spram(ifxusb_core_if_t *_core_if,uint32_t dwords)
++{
++	volatile uint32_t *addr1,*addr2, *start_addr, *end_addr;
++
++	if(!dwords)
++		return;
++
++	start_addr = (uint32_t *)_core_if->data_fifo_dbg;
++
++	end_addr = (uint32_t *)_core_if->data_fifo_dbg;
++	end_addr += dwords;
++
++	IFX_PRINT("Clearning SPRAM: 0x%8X-0x%8X\n", (uint32_t)start_addr,(uint32_t)end_addr);
++	for(addr1 = start_addr; addr1 < end_addr; addr1+=4)
++	{
++		for(addr2 = addr1; addr2 < addr1+4; addr2++)
++			*addr2=0x00000000;
++	}
++	IFX_PRINT("Clearning SPRAM: 0x%8X-0x%8X Done\n", (uint32_t)start_addr,(uint32_t)end_addr);
++	return;
++}
++
+diff --git a/drivers/usb/ifxhcd/ifxusb_cif.h b/drivers/usb/ifxhcd/ifxusb_cif.h
+new file mode 100644
+index 0000000..191781f
+--- /dev/null
++++ b/drivers/usb/ifxhcd/ifxusb_cif.h
+@@ -0,0 +1,665 @@
++/*****************************************************************************
++ **   FILE NAME       : ifxusb_cif.h
++ **   PROJECT         : IFX USB sub-system V3
++ **   MODULES         : IFX USB sub-system Host and Device driver
++ **   SRC VERSION     : 1.0
++ **   DATE            : 1/Jan/2009
++ **   AUTHOR          : Chen, Howard
++ **   DESCRIPTION     : The Core Interface provides basic services for accessing and
++ **                     managing the IFX USB hardware. These services are used by both the
++ **                     Host Controller Driver and the Peripheral Controller Driver.
++ **   FUNCTIONS       :
++ **   COMPILER        : gcc
++ **   REFERENCE       : IFX hardware ref handbook for each plateforms
++ **   COPYRIGHT       :
++ **  Version Control Section  **
++ **   $Author$
++ **   $Date$
++ **   $Revisions$
++ **   $Log$       Revision history
++*****************************************************************************/
++
++/*!
++ \defgroup IFXUSB_DRIVER_V3 IFX USB SS Project
++ \brief IFX USB subsystem V3.x
++ */
++
++/*!
++ \defgroup IFXUSB_CIF Core Interface APIs
++ \ingroup IFXUSB_DRIVER_V3
++ \brief The Core Interface provides basic services for accessing and
++        managing the IFXUSB hardware. These services are used by both the
++        Host Controller Driver and the Peripheral Controller Driver.
++ */
++
++
++/*!
++ \file ifxusb_cif.h
++ \ingroup IFXUSB_DRIVER_V3
++ \brief This file contains the interface to the IFX USB Core.
++ */
++
++#if !defined(__IFXUSB_CIF_H__)
++#define __IFXUSB_CIF_H__
++
++#include <linux/workqueue.h>
++
++#include <linux/version.h>
++#include <asm/param.h>
++
++#include "ifxusb_plat.h"
++#include "ifxusb_regs.h"
++
++#ifdef __DEBUG__
++	#include "linux/timer.h"
++#endif
++
++///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++
++#define IFXUSB_PARAM_SPEED_HIGH 0
++#define IFXUSB_PARAM_SPEED_FULL 1
++
++#define IFXUSB_EP_SPEED_LOW     0
++#define IFXUSB_EP_SPEED_FULL    1
++#define IFXUSB_EP_SPEED_HIGH    2
++
++#define IFXUSB_EP_TYPE_CTRL     0
++#define IFXUSB_EP_TYPE_ISOC     1
++#define IFXUSB_EP_TYPE_BULK     2
++#define IFXUSB_EP_TYPE_INTR     3
++
++#define IFXUSB_HC_PID_DATA0 0
++#define IFXUSB_HC_PID_DATA2 1
++#define IFXUSB_HC_PID_DATA1 2
++#define IFXUSB_HC_PID_MDATA 3
++#define IFXUSB_HC_PID_SETUP 3
++
++
++/*!
++ \addtogroup IFXUSB_CIF
++ */
++/*@{*/
++
++/*!
++ \struct ifxusb_params
++ \brief IFXUSB Parameters structure.
++       This structure is used for both importing from insmod stage and run-time storage.
++       These parameters define how the IFXUSB controller should be configured.
++ */
++typedef struct ifxusb_params
++{
++	int32_t dma_burst_size;  /*!< The DMA Burst size (applicable only for Internal DMA
++	                              Mode). 0(for single), 1(incr), 4(incr4), 8(incr8) 16(incr16)
++	                          */
++	                         /* Translate this to GAHBCFG values */
++	int32_t speed;           /*!< Specifies the maximum speed of operation in host and device mode.
++	                              The actual speed depends on the speed of the attached device and
++	                              the value of phy_type. The actual speed depends on the speed of the
++	                              attached device.
++	                              0 - High Speed (default)
++	                              1 - Full Speed
++                              */
++
++	int32_t data_fifo_size;   /*!< Total number of dwords in the data FIFO memory. This
++	                               memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic
++	                               Tx FIFOs.
++	                               32 to 32768
++	                           */
++	#ifdef __IS_DEVICE__
++		int32_t rx_fifo_size; /*!< Number of dwords in the Rx FIFO in device mode.
++		                           16 to 32768
++		                       */
++
++
++		int32_t tx_fifo_size[MAX_EPS_CHANNELS]; /*!< Number of dwords in each of the Tx FIFOs in device mode.
++		                                             4 to 768
++		                                         */
++		#ifdef __DED_FIFO__
++			int32_t thr_ctl;        /*!< Threshold control on/off */
++			int32_t tx_thr_length;  /*!< Threshold length for Tx */
++			int32_t rx_thr_length;  /*!< Threshold length for Rx*/
++		#endif
++	#else //__IS_HOST__
++		int32_t host_channels;      /*!< The number of host channel registers to use.
++		                                 1 to 16
++		                             */
++
++		int32_t rx_fifo_size;       /*!< Number of dwords in the Rx FIFO in host mode.
++		                                16 to 32768
++		                             */
++
++		int32_t nperio_tx_fifo_size;/*!< Number of dwords in the non-periodic Tx FIFO in host mode.
++		                                 16 to 32768
++		                             */
++
++		int32_t perio_tx_fifo_size; /*!< Number of dwords in the host periodic Tx FIFO.
++		                                 16 to 32768
++		                             */
++	#endif //__IS_HOST__
++
++	int32_t max_transfer_size;      /*!< The maximum transfer size supported in bytes.
++	                                     2047 to 65,535
++	                                 */
++
++	int32_t max_packet_count;       /*!< The maximum number of packets in a transfer.
++	                                     15 to 511  (default 511)
++	                                 */
++	int32_t phy_utmi_width;         /*!< Specifies the UTMI+ Data Width.
++	                                     8 or 16 bits (default 16)
++	                                 */
++
++	int32_t turn_around_time_hs;    /*!< Specifies the Turn-Around time at HS*/
++	int32_t turn_around_time_fs;    /*!< Specifies the Turn-Around time at FS*/
++
++	int32_t timeout_cal_hs;         /*!< Specifies the Timeout_Calibration at HS*/
++	int32_t timeout_cal_fs;         /*!< Specifies the Timeout_Calibration at FS*/
++} ifxusb_params_t;
++
++///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++
++/*!
++ \struct ifxusb_core_if
++ \brief The ifx_core_if structure contains information needed to manage
++       the IFX USB controller acting in either host or device mode. It
++       represents the programming view of the controller as a whole.
++ */
++typedef struct ifxusb_core_if
++{
++	ifxusb_params_t      params;  /*!< Run-time Parameters */
++
++	uint8_t  core_no;             /*!< core number (used as id when multi-core case */
++	char    *core_name;           /*!< core name used for registration and informative purpose*/
++	int      irq;                 /*!< irq number this core is hooked */
++
++	/*****************************************************************
++	 * Structures and pointers to physical register interface.
++	 *****************************************************************/
++	/** Core Global registers starting at offset 000h. */
++	ifxusb_core_global_regs_t *core_global_regs;  /*!< pointer to Core Global Registers, offset at 000h */
++
++	/** Host-specific registers */
++	#ifdef __IS_HOST__
++		/** Host Global Registers starting at offset 400h.*/
++		ifxusb_host_global_regs_t *host_global_regs; /*!< pointer to Host Global Registers, offset at 400h */
++			#define IFXUSB_HOST_GLOBAL_REG_OFFSET 0x400
++		/** Host Port 0 Control and Status Register */
++		volatile uint32_t *hprt0;                    /*!< pointer to HPRT0 Registers, offset at 440h */
++			#define IFXUSB_HOST_PORT_REGS_OFFSET 0x440
++		/** Host Channel Specific Registers at offsets 500h-5FCh. */
++		ifxusb_hc_regs_t *hc_regs[MAX_EPS_CHANNELS]; /*!< pointer to Host-Channel n Registers, offset at 500h */
++			#define IFXUSB_HOST_CHAN_REGS_OFFSET 0x500
++			#define IFXUSB_CHAN_REGS_OFFSET 0x20
++	#endif
++
++	/** Device-specific registers */
++	#ifdef __IS_DEVICE__
++		/** Device Global Registers starting at offset 800h */
++		ifxusb_device_global_regs_t *dev_global_regs; /*!< pointer to Device Global Registers, offset at 800h */
++			#define IFXUSB_DEV_GLOBAL_REG_OFFSET 0x800
++
++		/** Device Logical IN Endpoint-Specific Registers 900h-AFCh */
++		ifxusb_dev_in_ep_regs_t     *in_ep_regs[MAX_EPS_CHANNELS]; /*!< pointer to Device IN-EP Registers, offset at 900h */
++			#define IFXUSB_DEV_IN_EP_REG_OFFSET 0x900
++			#define IFXUSB_EP_REG_OFFSET 0x20
++		/** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */
++		ifxusb_dev_out_ep_regs_t    *out_ep_regs[MAX_EPS_CHANNELS];/*!< pointer to Device OUT-EP Registers, offset at 900h */
++			#define IFXUSB_DEV_OUT_EP_REG_OFFSET 0xB00
++	#endif
++
++	/** Power and Clock Gating Control Register */
++	volatile uint32_t *pcgcctl;                                    /*!< pointer to Power and Clock Gating Control Registers, offset at E00h */
++		#define IFXUSB_PCGCCTL_OFFSET 0xE00
++
++	/** Push/pop addresses for endpoints or host channels.*/
++	uint32_t *data_fifo[MAX_EPS_CHANNELS];    /*!< pointer to FIFO access windows, offset at 1000h */
++		#define IFXUSB_DATA_FIFO_OFFSET 0x1000
++		#define IFXUSB_DATA_FIFO_SIZE   0x1000
++
++	uint32_t *data_fifo_dbg;                 /*!< pointer to FIFO debug windows, offset at 1000h */
++
++	/** Hardware Configuration -- stored here for convenience.*/
++	hwcfg1_data_t hwcfg1;  /*!< preserved Hardware Configuration 1 */
++	hwcfg2_data_t hwcfg2;  /*!< preserved Hardware Configuration 2 */
++	hwcfg3_data_t hwcfg3;  /*!< preserved Hardware Configuration 3 */
++	hwcfg4_data_t hwcfg4;  /*!< preserved Hardware Configuration 3 */
++	uint32_t      snpsid;  /*!< preserved SNPSID */
++
++	/*****************************************************************
++	 * Run-time informations.
++	 *****************************************************************/
++	/* Set to 1 if the core PHY interface bits in USBCFG have been  initialized. */
++	uint8_t phy_init_done;  /*!< indicated PHY is initialized. */
++
++	#ifdef __IS_HOST__
++		uint8_t queuing_high_bandwidth; /*!< Host mode, Queueing High Bandwidth. */
++	#endif
++} ifxusb_core_if_t;
++
++/*@}*//*IFXUSB_CIF*/
++
++
++/*!
++ \fn    void *ifxusb_alloc_buf(size_t size, int clear)
++ \brief This function is called to allocate buffer of specified size.
++        The allocated buffer is mapped into DMA accessable address.
++ \param    size Size in BYTE to be allocated
++ \param    clear 0: don't do clear after buffer allocated, other: do clear to zero
++ \return   0/NULL: Fail; uncached pointer of allocated buffer
++ \ingroup  IFXUSB_CIF
++ */
++extern void *ifxusb_alloc_buf(size_t size, int clear);
++
++/*!
++ \fn    void ifxusb_free_buf(void *vaddr)
++ \brief This function is called to free allocated buffer.
++ \param vaddr the uncached pointer of the buffer
++ \ingroup  IFXUSB_CIF
++ */
++extern void ifxusb_free_buf(void *vaddr);
++
++/*!
++ \fn    int ifxusb_core_if_init(ifxusb_core_if_t *_core_if,
++                        int               _irq,
++                        uint32_t          _reg_base_addr,
++                        uint32_t          _fifo_base_addr,
++                        uint32_t          _fifo_dbg_addr)
++ \brief This function is called to initialize the IFXUSB CSR data
++        structures.  The register addresses in the device and host
++        structures are initialized from the base address supplied by the
++        caller.  The calling function must make the OS calls to get the
++        base address of the IFXUSB controller registers.
++ \param _core_if        Pointer of core_if structure
++ \param _irq            irq number
++ \param _reg_base_addr  Base address of IFXUSB core registers
++ \param _fifo_base_addr Fifo base address
++ \param _fifo_dbg_addr  Fifo debug address
++ \return 0: success;
++ \ingroup  IFXUSB_CIF
++ */
++extern int ifxusb_core_if_init(ifxusb_core_if_t *_core_if,
++                        int               _irq,
++                        uint32_t          _reg_base_addr,
++                        uint32_t          _fifo_base_addr,
++                        uint32_t          _fifo_dbg_addr);
++
++
++/*!
++ \fn    void ifxusb_core_if_remove(ifxusb_core_if_t *_core_if)
++ \brief This function free the mapped address in the IFXUSB CSR data structures.
++ \param _core_if Pointer of core_if structure
++ \ingroup  IFXUSB_CIF
++ */
++extern void ifxusb_core_if_remove(ifxusb_core_if_t *_core_if);
++
++/*!
++ \fn    void ifxusb_enable_global_interrupts( ifxusb_core_if_t *_core_if )
++ \brief This function enbles the controller's Global Interrupt in the AHB Config register.
++ \param _core_if Pointer of core_if structure
++ */
++extern void ifxusb_enable_global_interrupts( ifxusb_core_if_t *_core_if );
++
++/*!
++ \fn    void ifxusb_disable_global_interrupts( ifxusb_core_if_t *_core_if )
++ \brief This function disables the controller's Global Interrupt in the AHB Config register.
++ \param _core_if Pointer of core_if structure
++ \ingroup  IFXUSB_CIF
++ */
++extern void ifxusb_disable_global_interrupts( ifxusb_core_if_t *_core_if );
++
++/*!
++ \fn    void ifxusb_flush_tx_fifo( ifxusb_core_if_t *_core_if, const int _num )
++ \brief Flush a Tx FIFO.
++ \param _core_if Pointer of core_if structure
++ \param _num Tx FIFO to flush. ( 0x10 for ALL TX FIFO )
++ \ingroup  IFXUSB_CIF
++ */
++extern void ifxusb_flush_tx_fifo( ifxusb_core_if_t *_core_if, const int _num );
++
++/*!
++ \fn    void ifxusb_flush_rx_fifo( ifxusb_core_if_t *_core_if )
++ \brief Flush Rx FIFO.
++ \param _core_if Pointer of core_if structure
++ \ingroup  IFXUSB_CIF
++ */
++extern void ifxusb_flush_rx_fifo( ifxusb_core_if_t *_core_if );
++
++/*!
++ \fn    void ifxusb_flush_both_fifo( ifxusb_core_if_t *_core_if )
++ \brief Flush ALL Rx and Tx FIFO.
++ \param _core_if Pointer of core_if structure
++ \ingroup  IFXUSB_CIF
++ */
++extern void ifxusb_flush_both_fifo( ifxusb_core_if_t *_core_if );
++
++
++/*!
++ \fn    int ifxusb_core_soft_reset(ifxusb_core_if_t *_core_if)
++ \brief Do core a soft reset of the core.  Be careful with this because it
++        resets all the internal state machines of the core.
++ \param    _core_if Pointer of core_if structure
++ \ingroup  IFXUSB_CIF
++ */
++extern int ifxusb_core_soft_reset(ifxusb_core_if_t *_core_if);
++
++
++/*!
++ \brief Turn on the USB Core Power
++ \param _core_if Pointer of core_if structure
++ \ingroup  IFXUSB_CIF
++*/
++extern void ifxusb_power_on (ifxusb_core_if_t *_core_if);
++
++/*!
++ \fn    void ifxusb_power_off (ifxusb_core_if_t *_core_if)
++ \brief Turn off the USB Core Power
++ \param _core_if Pointer of core_if structure
++ \ingroup  IFXUSB_CIF
++*/
++extern void ifxusb_power_off (ifxusb_core_if_t *_core_if);
++
++/*!
++ \fn    void ifxusb_phy_power_on (ifxusb_core_if_t *_core_if)
++ \brief Turn on the USB PHY Power
++ \param _core_if Pointer of core_if structure
++ \ingroup  IFXUSB_CIF
++*/
++extern void ifxusb_phy_power_on (ifxusb_core_if_t *_core_if);
++
++/*!
++ \fn    void ifxusb_phy_power_off (ifxusb_core_if_t *_core_if)
++ \brief Turn off the USB PHY Power
++ \param _core_if Pointer of core_if structure
++ \ingroup  IFXUSB_CIF
++*/
++extern void ifxusb_phy_power_off (ifxusb_core_if_t *_core_if);
++
++/*!
++ \fn    void ifxusb_hard_reset(ifxusb_core_if_t *_core_if)
++ \brief Reset on the USB Core RCU
++ \param _core_if Pointer of core_if structure
++ \ingroup  IFXUSB_CIF
++ */
++extern void ifxusb_hard_reset(ifxusb_core_if_t *_core_if);
++
++///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++
++
++#ifdef __IS_HOST__
++	/*!
++	 \fn    void ifxusb_host_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t  *_params)
++	 \brief This function initializes the IFXUSB controller registers for  Host mode.
++	        This function flushes the Tx and Rx FIFOs and it flushes any entries in the
++	        request queues.
++	 \param _core_if        Pointer of core_if structure
++	 \param _params         parameters to be set
++	 \ingroup  IFXUSB_CIF
++	 */
++	extern void ifxusb_host_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t  *_params);
++
++	/*!
++	 \fn    void ifxusb_host_enable_interrupts(ifxusb_core_if_t *_core_if)
++	 \brief This function enables the Host mode interrupts.
++	 \param _core_if        Pointer of core_if structure
++	 \ingroup  IFXUSB_CIF
++	 */
++	extern void ifxusb_host_enable_interrupts(ifxusb_core_if_t *_core_if);
++
++	/*!
++	 \fn    void ifxusb_host_disable_interrupts(ifxusb_core_if_t *_core_if)
++	 \brief This function disables the Host mode interrupts.
++	 \param _core_if        Pointer of core_if structure
++	 \ingroup  IFXUSB_CIF
++	 */
++	extern void ifxusb_host_disable_interrupts(ifxusb_core_if_t *_core_if);
++
++	#if defined(__IS_TWINPASS__)
++		extern void ifxusb_enable_afe_oc(void);
++	#endif
++
++	/*!
++	 \fn    void ifxusb_vbus_init(ifxusb_core_if_t *_core_if)
++	 \brief This function init the VBUS control.
++	 \param _core_if        Pointer of core_if structure
++	 \ingroup  IFXUSB_CIF
++	 */
++	extern void ifxusb_vbus_init(ifxusb_core_if_t *_core_if);
++
++	/*!
++	 \fn    void ifxusb_vbus_free(ifxusb_core_if_t *_core_if)
++	 \brief This function free the VBUS control.
++	 \param _core_if        Pointer of core_if structure
++	 \ingroup  IFXUSB_CIF
++	 */
++	extern void ifxusb_vbus_free(ifxusb_core_if_t *_core_if);
++
++	/*!
++	 \fn    void ifxusb_vbus_on(ifxusb_core_if_t *_core_if)
++	 \brief Turn on the USB 5V VBus Power
++	 \param _core_if        Pointer of core_if structure
++	 \ingroup  IFXUSB_CIF
++	 */
++	extern void ifxusb_vbus_on(ifxusb_core_if_t *_core_if);
++
++	/*!
++	 \fn    void ifxusb_vbus_off(ifxusb_core_if_t *_core_if)
++	 \brief Turn off the USB 5V VBus Power
++	 \param _core_if        Pointer of core_if structure
++	 \ingroup  IFXUSB_CIF
++	 */
++	extern void ifxusb_vbus_off(ifxusb_core_if_t *_core_if);
++
++	/*!
++	 \fn    int ifxusb_vbus(ifxusb_core_if_t *_core_if)
++	 \brief Read Current VBus status
++	 \param _core_if        Pointer of core_if structure
++	 \ingroup  IFXUSB_CIF
++	 */
++	extern int ifxusb_vbus(ifxusb_core_if_t *_core_if);
++
++	#if defined(__DO_OC_INT__) && defined(__DO_OC_INT_ENABLE__)
++		/*!
++		 \fn    void ifxusb_oc_int_on(void)
++		 \brief Turn on the OC interrupt
++		 \ingroup  IFXUSB_CIF
++		 */
++		extern void ifxusb_oc_int_on(void);
++
++		/*!
++		 \fn    void ifxusb_oc_int_off(void)
++		 \brief Turn off the OC interrupt
++		 \ingroup  IFXUSB_CIF
++		 */
++		extern void ifxusb_oc_int_off(void);
++	#endif //defined(__DO_OC_INT__) && defined(__DO_OC_INT_ENABLE__)
++#endif
++
++///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++
++
++#ifdef __IS_DEVICE__
++	/*!
++	 \fn    void ifxusb_dev_enable_interrupts(ifxusb_core_if_t *_core_if)
++	 \brief This function enables the Device mode interrupts.
++	 \param _core_if        Pointer of core_if structure
++	 \ingroup  IFXUSB_CIF
++	 */
++	extern void ifxusb_dev_enable_interrupts(ifxusb_core_if_t *_core_if);
++
++	/*!
++	 \fn    uint32_t ifxusb_dev_get_frame_number(ifxusb_core_if_t *_core_if)
++	 \brief Gets the current USB frame number. This is the frame number from the last SOF packet.
++	 \param _core_if        Pointer of core_if structure
++	 \ingroup  IFXUSB_CIF
++	 */
++	extern uint32_t ifxusb_dev_get_frame_number(ifxusb_core_if_t *_core_if);
++
++	/*!
++	 \fn    void ifxusb_dev_ep_set_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _is_in)
++	 \brief Set the EP STALL.
++	 \param _core_if        Pointer of core_if structure
++	 \param _epno           EP number
++	 \param _is_in          1: is IN transfer
++	 \ingroup  IFXUSB_CIF
++	 */
++	extern void ifxusb_dev_ep_set_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _is_in);
++
++	/*!
++	 \fn    void ifxusb_dev_ep_clear_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _ep_type, uint8_t _is_in)
++	 \brief Set the EP STALL.
++	 \param _core_if        Pointer of core_if structure
++	 \param _epno           EP number
++	 \param _ep_type        EP Type
++	 \ingroup  IFXUSB_CIF
++	 */
++	extern void ifxusb_dev_ep_clear_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _ep_type, uint8_t _is_in);
++
++	/*!
++	 \fn    void ifxusb_dev_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t  *_params)
++	 \brief  This function initializes the IFXUSB controller registers for Device mode.
++	         This function flushes the Tx and Rx FIFOs and it flushes any entries in the
++	         request queues.
++	         This function validate the imported parameters and store the result in the CIF structure.
++	             After
++	 \param _core_if  Pointer of core_if structure
++	 \param _params   structure of inported parameters
++	 \ingroup  IFXUSB_CIF
++	 */
++	extern void ifxusb_dev_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t  *_params);
++#endif
++
++///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++
++#if defined(__GADGET_LED__) || defined(__HOST_LED__)
++	/*!
++	 \fn    void ifxusb_led_init(ifxusb_core_if_t *_core_if)
++	 \brief This function init the LED control.
++	 \param _core_if        Pointer of core_if structure
++	 \ingroup  IFXUSB_CIF
++	 */
++	extern void ifxusb_led_init(ifxusb_core_if_t *_core_if);
++
++	/*!
++	 \fn    void ifxusb_led_free(ifxusb_core_if_t *_core_if)
++	 \brief This function free the LED control.
++	 \param _core_if        Pointer of core_if structure
++	 \ingroup  IFXUSB_CIF
++	 */
++	extern void ifxusb_led_free(ifxusb_core_if_t *_core_if);
++
++	/*!
++	 \fn    void ifxusb_led(ifxusb_core_if_t *_core_if)
++	 \brief This function trigger the LED access.
++	 \param _core_if        Pointer of core_if structure
++	 \ingroup  IFXUSB_CIF
++	 */
++	extern void ifxusb_led(ifxusb_core_if_t *_core_if);
++#endif
++
++///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++
++/* internal routines for debugging */
++extern void ifxusb_dump_msg(const u8 *buf, unsigned int length);
++extern void ifxusb_dump_spram(ifxusb_core_if_t *_core_if);
++extern void ifxusb_dump_registers(ifxusb_core_if_t *_core_if);
++extern void ifxusb_clean_spram(ifxusb_core_if_t *_core_if,uint32_t dwords);
++
++///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++
++static inline uint32_t ifxusb_read_core_intr(ifxusb_core_if_t *_core_if)
++{
++	return (ifxusb_rreg(&_core_if->core_global_regs->gintsts) &
++	        (ifxusb_rreg(&_core_if->core_global_regs->gintmsk)
++#ifdef __USE_TIMER_4_SOF__
++			 | IFXUSB_SOF_INTR_MASK
++#endif
++			));
++}
++
++static inline uint32_t ifxusb_read_otg_intr (ifxusb_core_if_t *_core_if)
++{
++	return (ifxusb_rreg (&_core_if->core_global_regs->gotgint));
++}
++
++static inline uint32_t ifxusb_mode(ifxusb_core_if_t *_core_if)
++{
++	return (ifxusb_rreg( &_core_if->core_global_regs->gintsts ) & 0x1);
++}
++static inline uint8_t ifxusb_is_device_mode(ifxusb_core_if_t *_core_if)
++{
++	return (ifxusb_mode(_core_if) != 1);
++}
++static inline uint8_t ifxusb_is_host_mode(ifxusb_core_if_t *_core_if)
++{
++	return (ifxusb_mode(_core_if) == 1);
++}
++
++///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++
++#ifdef __IS_HOST__
++	static inline uint32_t ifxusb_read_hprt0(ifxusb_core_if_t *_core_if)
++	{
++		hprt0_data_t hprt0;
++		hprt0.d32 = ifxusb_rreg(_core_if->hprt0);
++		hprt0.b.prtena = 0;
++		hprt0.b.prtconndet = 0;
++		hprt0.b.prtenchng = 0;
++		hprt0.b.prtovrcurrchng = 0;
++		return hprt0.d32;
++	}
++
++	static inline uint32_t ifxusb_read_host_all_channels_intr (ifxusb_core_if_t *_core_if)
++	{
++		return (ifxusb_rreg (&_core_if->host_global_regs->haint));
++	}
++
++	static inline uint32_t ifxusb_read_host_channel_intr (ifxusb_core_if_t *_core_if, int hc_num)
++	{
++		return (ifxusb_rreg (&_core_if->hc_regs[hc_num]->hcint));
++	}
++#endif
++
++#ifdef __IS_DEVICE__
++	static inline uint32_t ifxusb_read_dev_all_in_ep_intr(ifxusb_core_if_t *_core_if)
++	{
++		uint32_t v;
++		v = ifxusb_rreg(&_core_if->dev_global_regs->daint) &
++		    ifxusb_rreg(&_core_if->dev_global_regs->daintmsk);
++		return (v & 0xffff);
++	}
++
++	static inline uint32_t ifxusb_read_dev_all_out_ep_intr(ifxusb_core_if_t *_core_if)
++	{
++		uint32_t v;
++		v = ifxusb_rreg(&_core_if->dev_global_regs->daint) &
++		    ifxusb_rreg(&_core_if->dev_global_regs->daintmsk);
++		return ((v & 0xffff0000) >> 16);
++	}
++
++	static inline uint32_t ifxusb_read_dev_in_ep_intr(ifxusb_core_if_t *_core_if, int _ep_num)
++	{
++		uint32_t v;
++		v = ifxusb_rreg(&_core_if->in_ep_regs[_ep_num]->diepint) &
++		    ifxusb_rreg(&_core_if->dev_global_regs->diepmsk);
++		return v;
++	}
++
++	static inline uint32_t ifxusb_read_dev_out_ep_intr(ifxusb_core_if_t *_core_if, int _ep_num)
++	{
++		uint32_t v;
++		v = ifxusb_rreg(&_core_if->out_ep_regs[_ep_num]->doepint) &
++		    ifxusb_rreg(&_core_if->dev_global_regs->doepmsk);
++		return v;
++	}
++
++#endif
++
++extern void ifxusb_attr_create (void *_dev);
++
++extern void ifxusb_attr_remove (void *_dev);
++
++///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++
++#endif // !defined(__IFXUSB_CIF_H__)
++
++
+diff --git a/drivers/usb/ifxhcd/ifxusb_cif_d.c b/drivers/usb/ifxhcd/ifxusb_cif_d.c
+new file mode 100644
+index 0000000..36ab0e7
+--- /dev/null
++++ b/drivers/usb/ifxhcd/ifxusb_cif_d.c
+@@ -0,0 +1,458 @@
++/*****************************************************************************
++ **   FILE NAME       : ifxusb_cif_d.c
++ **   PROJECT         : IFX USB sub-system V3
++ **   MODULES         : IFX USB sub-system Host and Device driver
++ **   SRC VERSION     : 1.0
++ **   DATE            : 1/Jan/2009
++ **   AUTHOR          : Chen, Howard
++ **   DESCRIPTION     : The Core Interface provides basic services for accessing and
++ **                     managing the IFX USB hardware. These services are used by the
++ **                     Peripheral Controller Driver only.
++ *****************************************************************************/
++
++/*!
++ \file ifxusb_cif_d.c
++ \ingroup IFXUSB_DRIVER_V3
++ \brief This file contains the interface to the IFX USB Core.
++*/
++
++#include <linux/version.h>
++#include "ifxusb_version.h"
++
++
++#include <asm/byteorder.h>
++#include <asm/unaligned.h>
++
++#ifdef __DEBUG__
++	#include <linux/jiffies.h>
++#endif
++
++#include "ifxusb_plat.h"
++#include "ifxusb_regs.h"
++#include "ifxusb_cif.h"
++
++#include "ifxpcd.h"
++
++
++
++/*!
++ \brief Initializes the DevSpd field of the DCFG register depending on the PHY type
++ and the enumeration speed of the device.
++ \param _core_if        Pointer of core_if structure
++ */
++void ifxusb_dev_init_spd(ifxusb_core_if_t *_core_if)
++{
++	uint32_t    val;
++	dcfg_data_t dcfg;
++
++	IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++	if (_core_if->params.speed == IFXUSB_PARAM_SPEED_FULL)
++		/* High speed PHY running at full speed */
++		val = 0x1;
++	else
++		/* High speed PHY running at high speed and full speed*/
++		val = 0x0;
++
++	IFX_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val);
++	dcfg.d32 = ifxusb_rreg(&_core_if->dev_global_regs->dcfg);
++	dcfg.b.devspd = val;
++	ifxusb_wreg(&_core_if->dev_global_regs->dcfg, dcfg.d32);
++}
++
++
++/*!
++ \brief This function enables the Device mode interrupts.
++ \param _core_if        Pointer of core_if structure
++ */
++void ifxusb_dev_enable_interrupts(ifxusb_core_if_t *_core_if)
++{
++	gint_data_t intr_mask ={ .d32 = 0};
++	ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
++
++	IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++	IFX_DEBUGPL(DBG_CIL, "%s()\n", __func__);
++
++	/* Clear any pending OTG Interrupts */
++	ifxusb_wreg( &global_regs->gotgint, 0xFFFFFFFF);
++
++	/* Clear any pending interrupts */
++	ifxusb_wreg( &global_regs->gintsts, 0xFFFFFFFF);
++
++	/* Enable the interrupts in the GINTMSK.*/
++	intr_mask.b.modemismatch = 1;
++	intr_mask.b.conidstschng = 1;
++	intr_mask.b.wkupintr = 1;
++	intr_mask.b.disconnect = 1;
++	intr_mask.b.usbsuspend = 1;
++
++	intr_mask.b.usbreset = 1;
++	intr_mask.b.enumdone = 1;
++	intr_mask.b.inepintr = 1;
++	intr_mask.b.outepintr = 1;
++	intr_mask.b.erlysuspend = 1;
++	#ifndef __DED_FIFO__
++//		intr_mask.b.epmismatch = 1;
++	#endif
++
++	ifxusb_mreg( &global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
++	IFX_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__, ifxusb_rreg( &global_regs->gintmsk));
++}
++
++/*!
++ \brief Gets the current USB frame number. This is the frame number from the last SOF packet.
++ \param _core_if        Pointer of core_if structure
++ */
++uint32_t ifxusb_dev_get_frame_number(ifxusb_core_if_t *_core_if)
++{
++	dsts_data_t dsts;
++	IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++	dsts.d32 = ifxusb_rreg(&_core_if->dev_global_regs->dsts);
++	/* read current frame/microfreme number from DSTS register */
++	return dsts.b.soffn;
++}
++
++
++/*!
++ \brief  Set the EP STALL.
++ */
++void ifxusb_dev_ep_set_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _is_in)
++{
++	depctl_data_t depctl;
++	volatile uint32_t *depctl_addr;
++
++	IFX_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, _epno, (_is_in?"IN":"OUT"));
++
++	depctl_addr = (_is_in)? (&(_core_if->in_ep_regs [_epno]->diepctl)):
++	                        (&(_core_if->out_ep_regs[_epno]->doepctl));
++	depctl.d32 = ifxusb_rreg(depctl_addr);
++	depctl.b.stall = 1;
++
++	if (_is_in && depctl.b.epena)
++		depctl.b.epdis = 1;
++
++	ifxusb_wreg(depctl_addr, depctl.d32);
++	IFX_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",ifxusb_rreg(depctl_addr));
++	return;
++}
++
++/*!
++\brief  Clear the EP STALL.
++ */
++void ifxusb_dev_ep_clear_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _ep_type, uint8_t _is_in)
++{
++	depctl_data_t depctl;
++	volatile uint32_t *depctl_addr;
++
++	IFX_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, _epno, (_is_in?"IN":"OUT"));
++
++	depctl_addr = (_is_in)? (&(_core_if->in_ep_regs [_epno]->diepctl)):
++	                        (&(_core_if->out_ep_regs[_epno]->doepctl));
++
++	depctl.d32 = ifxusb_rreg(depctl_addr);
++	/* clear the stall bits */
++	depctl.b.stall = 0;
++
++	/*
++	 * USB Spec 9.4.5: For endpoints using data toggle, regardless
++	 * of whether an endpoint has the Halt feature set, a
++	 * ClearFeature(ENDPOINT_HALT) request always results in the
++	 * data toggle being reinitialized to DATA0.
++	 */
++	if (_ep_type == IFXUSB_EP_TYPE_INTR || _ep_type == IFXUSB_EP_TYPE_BULK)
++		depctl.b.setd0pid = 1; /* DATA0 */
++
++	ifxusb_wreg(depctl_addr, depctl.d32);
++	IFX_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",ifxusb_rreg(depctl_addr));
++	return;
++}
++
++/*!
++   \brief This function initializes the IFXUSB controller registers for Device mode.
++ This function flushes the Tx and Rx FIFOs and it flushes any entries in the
++ request queues.
++   \param _core_if        Pointer of core_if structure
++   \param _params         parameters to be set
++ */
++void ifxusb_dev_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t  *_params)
++{
++	ifxusb_core_global_regs_t *global_regs =  _core_if->core_global_regs;
++
++	gusbcfg_data_t usbcfg   ={.d32 = 0};
++	gahbcfg_data_t ahbcfg   ={.d32 = 0};
++	dcfg_data_t    dcfg     ={.d32 = 0};
++	grstctl_t      resetctl ={.d32 = 0};
++	gotgctl_data_t gotgctl  ={.d32 = 0};
++
++	uint32_t dir;
++	int i;
++
++	IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++	IFX_DEBUGPL(DBG_CILV, "%s(%p)\n",__func__,_core_if);
++
++	/* Copy Params */
++	_core_if->params.dma_burst_size      =  _params->dma_burst_size;
++	_core_if->params.speed               =  _params->speed;
++	if(_params->max_transfer_size < 2048 || _params->max_transfer_size > ((1 << (_core_if->hwcfg3.b.xfer_size_cntr_width + 11)) - 1) )
++		_core_if->params.max_transfer_size = ((1 << (_core_if->hwcfg3.b.xfer_size_cntr_width + 11)) - 1);
++	else
++		_core_if->params.max_transfer_size = _params->max_transfer_size;
++
++	if(_params->max_packet_count < 16 || _params->max_packet_count > ((1 << (_core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1) )
++		_core_if->params.max_packet_count= ((1 << (_core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1);
++	else
++		_core_if->params.max_packet_count=  _params->max_packet_count;
++	_core_if->params.phy_utmi_width      =  _params->phy_utmi_width;
++	_core_if->params.turn_around_time_hs =  _params->turn_around_time_hs;
++	_core_if->params.turn_around_time_fs =  _params->turn_around_time_fs;
++	_core_if->params.timeout_cal_hs      =  _params->timeout_cal_hs;
++	_core_if->params.timeout_cal_fs      =  _params->timeout_cal_fs;
++
++	#ifdef __DED_FIFO__
++		_core_if->params.thr_ctl         =  _params->thr_ctl;
++		_core_if->params.tx_thr_length   =  _params->tx_thr_length;
++		_core_if->params.rx_thr_length   =  _params->rx_thr_length;
++	#endif
++
++	/* Reset the Controller */
++	do
++	{
++		while(ifxusb_core_soft_reset( _core_if ))
++			ifxusb_hard_reset(_core_if);
++	} while (ifxusb_is_host_mode(_core_if));
++
++	usbcfg.d32 = ifxusb_rreg(&global_regs->gusbcfg);
++	#if 0
++	#if defined(__DED_FIFO__)
++		usbcfg.b.ForceDevMode = 1;
++		usbcfg.b.ForceHstMode = 0;
++	#endif
++	#endif
++	usbcfg.b.term_sel_dl_pulse = 0;
++	ifxusb_wreg (&global_regs->gusbcfg, usbcfg.d32);
++
++	/* This programming sequence needs to happen in FS mode before any other
++	 * programming occurs */
++	/* High speed PHY. */
++	if (!_core_if->phy_init_done)
++	{
++		_core_if->phy_init_done = 1;
++		/* HS PHY parameters.  These parameters are preserved
++		 * during soft reset so only program the first time.  Do
++		 * a soft reset immediately after setting phyif.  */
++		usbcfg.b.ulpi_utmi_sel = 0; //UTMI+
++		usbcfg.b.phyif = ( _core_if->params.phy_utmi_width == 16)?1:0;
++		ifxusb_wreg( &global_regs->gusbcfg, usbcfg.d32);
++		/* Reset after setting the PHY parameters */
++		ifxusb_core_soft_reset( _core_if );
++	}
++
++	/* Program the GAHBCFG Register.*/
++	switch (_core_if->params.dma_burst_size)
++	{
++		case 0 :
++			ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_SINGLE;
++			break;
++		case 1 :
++			ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR;
++			break;
++		case 4 :
++			ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR4;
++			break;
++		case 8 :
++			ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR8;
++			break;
++		case 16:
++			ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR16;
++			break;
++	}
++	ahbcfg.b.dmaenable = 1;
++	ifxusb_wreg(&global_regs->gahbcfg, ahbcfg.d32);
++
++	/* Program the GUSBCFG register. */
++	usbcfg.d32 = ifxusb_rreg( &global_regs->gusbcfg );
++	usbcfg.b.hnpcap = 0;
++	usbcfg.b.srpcap = 0;
++	ifxusb_wreg( &global_regs->gusbcfg, usbcfg.d32);
++
++	/* Restart the Phy Clock */
++	ifxusb_wreg(_core_if->pcgcctl, 0);
++
++	/* Device configuration register */
++	ifxusb_dev_init_spd(_core_if);
++	dcfg.d32 = ifxusb_rreg( &_core_if->dev_global_regs->dcfg);
++	dcfg.b.perfrint = IFXUSB_DCFG_FRAME_INTERVAL_80;
++	#if defined(__DED_FIFO__)
++		#if defined(__DESC_DMA__)
++			dcfg.b.descdma = 1;
++		#else
++			dcfg.b.descdma = 0;
++		#endif
++	#endif
++
++	ifxusb_wreg( &_core_if->dev_global_regs->dcfg, dcfg.d32 );
++
++	/* Configure data FIFO sizes */
++	_core_if->params.data_fifo_size = _core_if->hwcfg3.b.dfifo_depth;
++	_core_if->params.rx_fifo_size   = ifxusb_rreg(&global_regs->grxfsiz);
++	IFX_DEBUGPL(DBG_CIL, "Initial: FIFO Size=0x%06X\n"   , _core_if->params.data_fifo_size);
++	IFX_DEBUGPL(DBG_CIL, "         Rx FIFO Size=0x%06X\n", _core_if->params.rx_fifo_size);
++
++	_core_if->params.tx_fifo_size[0]= ifxusb_rreg(&global_regs->gnptxfsiz) >> 16;
++
++	#ifdef __DED_FIFO__
++		for (i=1; i <= _core_if->hwcfg4.b.num_in_eps; i++)
++			_core_if->params.tx_fifo_size[i] =
++				ifxusb_rreg(&global_regs->dptxfsiz_dieptxf[i-1]) >> 16;
++	#else
++		for (i=0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
++			_core_if->params.tx_fifo_size[i+1] =
++				ifxusb_rreg(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
++	#endif
++
++	#ifdef __DEBUG__
++		#ifdef __DED_FIFO__
++			for (i=0; i <= _core_if->hwcfg4.b.num_in_eps; i++)
++				IFX_DEBUGPL(DBG_CIL, "         Tx[%02d] FIFO Size=0x%06X\n",i, _core_if->params.tx_fifo_size[i]);
++		#else
++			IFX_DEBUGPL(DBG_CIL, "         NPTx FIFO Size=0x%06X\n", _core_if->params.tx_fifo_size[0]);
++			for (i=0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
++				IFX_DEBUGPL(DBG_CIL, "         PTx[%02d] FIFO Size=0x%06X\n",i, _core_if->params.tx_fifo_size[i+1]);
++		#endif
++	#endif
++
++	{
++		fifosize_data_t txfifosize;
++		if(_params->data_fifo_size >=0 && _params->data_fifo_size < _core_if->params.data_fifo_size)
++			_core_if->params.data_fifo_size = _params->data_fifo_size;
++
++
++		if(_params->rx_fifo_size >=0 && _params->rx_fifo_size < _core_if->params.rx_fifo_size)
++			_core_if->params.rx_fifo_size = _params->rx_fifo_size;
++		if(_core_if->params.data_fifo_size < _core_if->params.rx_fifo_size)
++			_core_if->params.rx_fifo_size = _core_if->params.data_fifo_size;
++		ifxusb_wreg( &global_regs->grxfsiz, _core_if->params.rx_fifo_size);
++
++		for (i=0; i < MAX_EPS_CHANNELS; i++)
++			if(_params->tx_fifo_size[i] >=0 && _params->tx_fifo_size[i] < _core_if->params.tx_fifo_size[i])
++				_core_if->params.tx_fifo_size[i] = _params->tx_fifo_size[i];
++
++		txfifosize.b.startaddr = _core_if->params.rx_fifo_size;
++		#ifdef __DED_FIFO__
++			if(txfifosize.b.startaddr + _core_if->params.tx_fifo_size[0] > _core_if->params.data_fifo_size)
++				_core_if->params.tx_fifo_size[0]= _core_if->params.data_fifo_size - txfifosize.b.startaddr;
++			txfifosize.b.depth=_core_if->params.tx_fifo_size[0];
++			ifxusb_wreg( &global_regs->gnptxfsiz, txfifosize.d32);
++			txfifosize.b.startaddr += _core_if->params.tx_fifo_size[0];
++			for (i=1; i <= _core_if->hwcfg4.b.num_in_eps; i++)
++			{
++				if(txfifosize.b.startaddr + _core_if->params.tx_fifo_size[i] > _core_if->params.data_fifo_size)
++					_core_if->params.tx_fifo_size[i]= _core_if->params.data_fifo_size - txfifosize.b.startaddr;
++				txfifosize.b.depth=_core_if->params.tx_fifo_size[i];
++				ifxusb_wreg( &global_regs->dptxfsiz_dieptxf[i-1], txfifosize.d32);
++				txfifosize.b.startaddr += _core_if->params.tx_fifo_size[i];
++			}
++		#else
++			if(txfifosize.b.startaddr + _core_if->params.tx_fifo_size[0] > _core_if->params.data_fifo_size)
++				_core_if->params.tx_fifo_size[0]= _core_if->params.data_fifo_size - txfifosize.b.startaddr;
++			txfifosize.b.depth=_core_if->params.tx_fifo_size[0];
++			ifxusb_wreg( &global_regs->gnptxfsiz, txfifosize.d32);
++			txfifosize.b.startaddr += _core_if->params.tx_fifo_size[0];
++			for (i=0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
++			{
++				if(txfifosize.b.startaddr + _core_if->params.tx_fifo_size[i+1] > _core_if->params.data_fifo_size)
++					_core_if->params.tx_fifo_size[i+1]= _core_if->params.data_fifo_size - txfifosize.b.startaddr;
++				//txfifosize.b.depth=_core_if->params.tx_fifo_size[i+1];
++				ifxusb_wreg( &global_regs->dptxfsiz_dieptxf[i], txfifosize.d32);
++				txfifosize.b.startaddr += _core_if->params.tx_fifo_size[i+1];
++			}
++		#endif
++	}
++
++	#ifdef __DEBUG__
++	{
++		fifosize_data_t fifosize;
++		IFX_DEBUGPL(DBG_CIL, "Result : FIFO Size=0x%06X\n"   , _core_if->params.data_fifo_size);
++
++		IFX_DEBUGPL(DBG_CIL, "         Rx FIFO =0x%06X Sz=0x%06X\n", 0,ifxusb_rreg(&global_regs->grxfsiz));
++		#ifdef __DED_FIFO__
++			fifosize.d32=ifxusb_rreg(&global_regs->gnptxfsiz);
++			IFX_DEBUGPL(DBG_CIL, "         Tx[00] FIFO =0x%06X Sz=0x%06X\n", fifosize.b.startaddr,fifosize.b.depth);
++			for (i=1; i <= _core_if->hwcfg4.b.num_in_eps; i++)
++			{
++				fifosize.d32=ifxusb_rreg(&global_regs->dptxfsiz_dieptxf[i-1]);
++				IFX_DEBUGPL(DBG_CIL, "         Tx[%02d] FIFO 0x%06X Sz=0x%06X\n",i, fifosize.b.startaddr,fifosize.b.depth);
++			}
++		#else
++			fifosize.d32=ifxusb_rreg(&global_regs->gnptxfsiz);
++			IFX_DEBUGPL(DBG_CIL, "         NPTx FIFO =0x%06X Sz=0x%06X\n", fifosize.b.startaddr,fifosize.b.depth);
++			for (i=0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
++			{
++				fifosize.d32=ifxusb_rreg(&global_regs->dptxfsiz_dieptxf[i]);
++				IFX_DEBUGPL(DBG_CIL, "         PTx[%02d] FIFO 0x%06X Sz=0x%06X\n",i, fifosize.b.startaddr,fifosize.b.depth);
++			}
++		#endif
++	}
++	#endif
++
++	/* Clear Host Set HNP Enable in the OTG Control Register */
++	gotgctl.b.hstsethnpen = 1;
++	ifxusb_mreg( &global_regs->gotgctl, gotgctl.d32, 0);
++
++	/* Flush the FIFOs */
++	ifxusb_flush_tx_fifo(_core_if, 0x10);  /* all Tx FIFOs */
++	ifxusb_flush_rx_fifo(_core_if);
++
++	/* Flush the Learning Queue. */
++	resetctl.b.intknqflsh = 1;
++	ifxusb_wreg( &global_regs->grstctl, resetctl.d32);
++
++	/* Clear all pending Device Interrupts */
++	ifxusb_wreg( &_core_if->dev_global_regs->diepmsk , 0 );
++	ifxusb_wreg( &_core_if->dev_global_regs->doepmsk , 0 );
++	ifxusb_wreg( &_core_if->dev_global_regs->daint   , 0xFFFFFFFF );
++	ifxusb_wreg( &_core_if->dev_global_regs->daintmsk, 0 );
++
++	dir=_core_if->hwcfg1.d32;
++	for (i=0; i <= _core_if->hwcfg2.b.num_dev_ep ; i++,dir>>=2)
++	{
++		depctl_data_t depctl;
++		if((dir&0x03)==0 || (dir&0x03) ==1)
++		{
++			depctl.d32 = ifxusb_rreg(&_core_if->in_ep_regs[i]->diepctl);
++			if (depctl.b.epena)
++			{
++				depctl.d32 = 0;
++				depctl.b.epdis = 1;
++				depctl.b.snak = 1;
++			}
++			else
++				depctl.d32 = 0;
++			ifxusb_wreg( &_core_if->in_ep_regs[i]->diepctl, depctl.d32);
++			#ifndef __DESC_DMA__
++				ifxusb_wreg( &_core_if->in_ep_regs[i]->dieptsiz, 0);
++			#endif
++			ifxusb_wreg( &_core_if->in_ep_regs[i]->diepdma, 0);
++			ifxusb_wreg( &_core_if->in_ep_regs[i]->diepint, 0xFF);
++		}
++
++		if((dir&0x03)==0 || (dir&0x03) ==2)
++		{
++			depctl.d32 = ifxusb_rreg(&_core_if->out_ep_regs[i]->doepctl);
++			if (depctl.b.epena)
++			{
++				depctl.d32 = 0;
++				depctl.b.epdis = 1;
++				depctl.b.snak = 1;
++			}
++			else
++				depctl.d32 = 0;
++			ifxusb_wreg( &_core_if->out_ep_regs[i]->doepctl, depctl.d32);
++			#ifndef __DESC_DMA__
++				ifxusb_wreg( &_core_if->out_ep_regs[i]->doeptsiz, 0);
++			#endif
++			ifxusb_wreg( &_core_if->out_ep_regs[i]->doepdma, 0);
++			ifxusb_wreg( &_core_if->out_ep_regs[i]->doepint, 0xFF);
++		}
++	}
++}
++
+diff --git a/drivers/usb/ifxhcd/ifxusb_cif_h.c b/drivers/usb/ifxhcd/ifxusb_cif_h.c
+new file mode 100644
+index 0000000..0f47ecd
+--- /dev/null
++++ b/drivers/usb/ifxhcd/ifxusb_cif_h.c
+@@ -0,0 +1,846 @@
++/*****************************************************************************
++ **   FILE NAME       : ifxusb_cif_h.c
++ **   PROJECT         : IFX USB sub-system V3
++ **   MODULES         : IFX USB sub-system Host and Device driver
++ **   SRC VERSION     : 1.0
++ **   DATE            : 1/Jan/2009
++ **   AUTHOR          : Chen, Howard
++ **   DESCRIPTION     : The Core Interface provides basic services for accessing and
++ **                     managing the IFX USB hardware. These services are used by the
++ **                     Host Controller Driver only.
++ *****************************************************************************/
++
++/*!
++ \file ifxusb_cif_h.c
++ \ingroup IFXUSB_DRIVER_V3
++ \brief This file contains the interface to the IFX USB Core.
++*/
++#include <linux/version.h>
++#include "ifxusb_version.h"
++
++#include <asm/byteorder.h>
++#include <asm/unaligned.h>
++
++#ifdef __DEBUG__
++	#include <linux/jiffies.h>
++#endif
++#include <linux/platform_device.h>
++#include <linux/kernel.h>
++#include <linux/ioport.h>
++#if defined(__UEIP__)
++//	#include <asm/ifx/ifx_board.h>
++#endif
++
++//#include <asm/ifx/ifx_gpio.h>
++#if defined(__UEIP__)
++//	#include <asm/ifx/ifx_led.h>
++#endif
++
++#include "ifxusb_plat.h"
++#include "ifxusb_regs.h"
++#include "ifxusb_cif.h"
++
++#include "ifxhcd.h"
++
++#if !defined(__UEIP__)
++	#undef __USING_LED_AS_GPIO__
++#endif
++
++
++/*!
++ \brief This function enables the Host mode interrupts.
++ \param _core_if        Pointer of core_if structure
++ */
++void ifxusb_host_enable_interrupts(ifxusb_core_if_t *_core_if)
++{
++	gint_data_t intr_mask ={ .d32 = 0};
++	ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
++
++	IFX_DEBUGPL(DBG_CIL, "%s()\n", __func__);
++
++	/* Clear any pending OTG Interrupts */
++	ifxusb_wreg( &global_regs->gotgint, 0xFFFFFFFF);
++
++	/* Clear any pending interrupts */
++	ifxusb_wreg( &global_regs->gintsts, 0xFFFFFFFF);
++
++	/* Enable the interrupts in the GINTMSK.*/
++
++	/* Common interrupts */
++	intr_mask.b.modemismatch = 1;
++	intr_mask.b.conidstschng = 1;
++	intr_mask.b.wkupintr = 1;
++	intr_mask.b.disconnect = 1;
++	intr_mask.b.usbsuspend = 1;
++
++	/* Host interrupts */
++	intr_mask.b.sofintr = 1;
++	intr_mask.b.portintr = 1;
++	intr_mask.b.hcintr = 1;
++
++	ifxusb_mreg( &global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
++	IFX_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__, ifxusb_rreg( &global_regs->gintmsk));
++}
++
++/*!
++ \brief This function disables the Host mode interrupts.
++ \param _core_if        Pointer of core_if structure
++ */
++void ifxusb_host_disable_interrupts(ifxusb_core_if_t *_core_if)
++{
++	ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
++
++	IFX_DEBUGPL(DBG_CILV, "%s()\n", __func__);
++
++	#if 1
++		ifxusb_wreg( &global_regs->gintmsk, 0);
++	#else
++		/* Common interrupts */
++		{
++			gint_data_t intr_mask ={.d32 = 0};
++			intr_mask.b.modemismatch = 1;
++			intr_mask.b.rxstsqlvl = 1;
++			intr_mask.b.conidstschng = 1;
++			intr_mask.b.wkupintr = 1;
++			intr_mask.b.disconnect = 1;
++			intr_mask.b.usbsuspend = 1;
++
++			/* Host interrupts */
++			intr_mask.b.sofintr = 1;
++			intr_mask.b.portintr = 1;
++			intr_mask.b.hcintr = 1;
++			intr_mask.b.ptxfempty = 1;
++			intr_mask.b.nptxfempty = 1;
++			ifxusb_mreg(&global_regs->gintmsk, intr_mask.d32, 0);
++		}
++	#endif
++}
++
++/*!
++ \brief This function initializes the IFXUSB controller registers for  Host mode.
++        This function flushes the Tx and Rx FIFOs and it flushes any entries in the
++        request queues.
++ \param _core_if        Pointer of core_if structure
++ \param _params         parameters to be set
++ */
++void ifxusb_host_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t  *_params)
++{
++	ifxusb_core_global_regs_t *global_regs =  _core_if->core_global_regs;
++
++	gusbcfg_data_t usbcfg   ={.d32 = 0};
++	gahbcfg_data_t ahbcfg   ={.d32 = 0};
++	gotgctl_data_t gotgctl  ={.d32 = 0};
++
++	int i;
++
++	IFX_DEBUGPL(DBG_CILV, "%s(%p)\n",__func__,_core_if);
++
++	/* Copy Params */
++
++	_core_if->params.dma_burst_size      =  _params->dma_burst_size;
++	_core_if->params.speed               =  _params->speed;
++	_core_if->params.max_transfer_size   =  _params->max_transfer_size;
++	_core_if->params.max_packet_count    =  _params->max_packet_count;
++	_core_if->params.phy_utmi_width      =  _params->phy_utmi_width;
++	_core_if->params.turn_around_time_hs =  _params->turn_around_time_hs;
++	_core_if->params.turn_around_time_fs =  _params->turn_around_time_fs;
++	_core_if->params.timeout_cal_hs      =  _params->timeout_cal_hs;
++	_core_if->params.timeout_cal_fs      =  _params->timeout_cal_fs;
++
++	/* Reset the Controller */
++	do
++	{
++		while(ifxusb_core_soft_reset( _core_if ))
++			ifxusb_hard_reset(_core_if);
++	} while (ifxusb_is_device_mode(_core_if));
++
++	usbcfg.d32 = ifxusb_rreg(&global_regs->gusbcfg);
++//	usbcfg.b.ulpi_ext_vbus_drv = 1;
++	usbcfg.b.term_sel_dl_pulse = 0;
++	ifxusb_wreg (&global_regs->gusbcfg, usbcfg.d32);
++
++	/* This programming sequence needs to happen in FS mode before any other
++	 * programming occurs */
++	/* High speed PHY. */
++	if (!_core_if->phy_init_done)
++	{
++		_core_if->phy_init_done = 1;
++		/* HS PHY parameters.  These parameters are preserved
++		 * during soft reset so only program the first time.  Do
++		 * a soft reset immediately after setting phyif.  */
++		usbcfg.b.ulpi_utmi_sel = 0; //UTMI+
++		usbcfg.b.phyif = ( _core_if->params.phy_utmi_width == 16)?1:0;
++		ifxusb_wreg( &global_regs->gusbcfg, usbcfg.d32);
++		/* Reset after setting the PHY parameters */
++		ifxusb_core_soft_reset( _core_if );
++	}
++
++	usbcfg.d32 = ifxusb_rreg(&global_regs->gusbcfg);
++//	usbcfg.b.ulpi_fsls = 0;
++//	usbcfg.b.ulpi_clk_sus_m = 0;
++	ifxusb_wreg(&global_regs->gusbcfg, usbcfg.d32);
++
++	/* Program the GAHBCFG Register.*/
++	switch (_core_if->params.dma_burst_size)
++	{
++		case 0 :
++			ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_SINGLE;
++			break;
++		case 1 :
++			ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR;
++			break;
++		case 4 :
++			ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR4;
++			break;
++		case 8 :
++			ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR8;
++			break;
++		case 16:
++			ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR16;
++			break;
++	}
++	ahbcfg.b.dmaenable = 1;
++	ifxusb_wreg(&global_regs->gahbcfg, ahbcfg.d32);
++
++	/* Program the GUSBCFG register. */
++	usbcfg.d32 = ifxusb_rreg( &global_regs->gusbcfg );
++	usbcfg.b.hnpcap = 0;
++	usbcfg.b.srpcap = 0;
++	ifxusb_wreg( &global_regs->gusbcfg, usbcfg.d32);
++
++	/* Restart the Phy Clock */
++	ifxusb_wreg(_core_if->pcgcctl, 0);
++
++	/* Initialize Host Configuration Register */
++	{
++		hcfg_data_t 	hcfg;
++		hcfg.d32 = ifxusb_rreg(&_core_if->host_global_regs->hcfg);
++		hcfg.b.fslspclksel = IFXUSB_HCFG_30_60_MHZ;
++		if (_params->speed == IFXUSB_PARAM_SPEED_FULL)
++			hcfg.b.fslssupp = 1;
++		ifxusb_wreg(&_core_if->host_global_regs->hcfg, hcfg.d32);
++	}
++
++	_core_if->params.host_channels=(_core_if->hwcfg2.b.num_host_chan + 1);
++
++	if(_params->host_channels>0 && _params->host_channels < _core_if->params.host_channels)
++		_core_if->params.host_channels = _params->host_channels;
++
++	/* Configure data FIFO sizes */
++	_core_if->params.data_fifo_size     = _core_if->hwcfg3.b.dfifo_depth;
++	_core_if->params.rx_fifo_size       = ifxusb_rreg(&global_regs->grxfsiz);
++	_core_if->params.nperio_tx_fifo_size= ifxusb_rreg(&global_regs->gnptxfsiz) >> 16;
++	_core_if->params.perio_tx_fifo_size = ifxusb_rreg(&global_regs->hptxfsiz) >> 16;
++	IFX_DEBUGPL(DBG_CIL, "Initial: FIFO Size=0x%06X\n"   , _core_if->params.data_fifo_size);
++	IFX_DEBUGPL(DBG_CIL, "           Rx FIFO Size=0x%06X\n", _core_if->params.rx_fifo_size);
++	IFX_DEBUGPL(DBG_CIL, "         NPTx FIFO Size=0x%06X\n", _core_if->params.nperio_tx_fifo_size);
++	IFX_DEBUGPL(DBG_CIL, "          PTx FIFO Size=0x%06X\n", _core_if->params.perio_tx_fifo_size);
++
++	{
++		fifosize_data_t txfifosize;
++		if(_params->data_fifo_size >=0 && _params->data_fifo_size < _core_if->params.data_fifo_size)
++			_core_if->params.data_fifo_size = _params->data_fifo_size;
++
++		if( _params->rx_fifo_size >= 0 && _params->rx_fifo_size < _core_if->params.rx_fifo_size)
++			_core_if->params.rx_fifo_size = _params->rx_fifo_size;
++		if( _params->nperio_tx_fifo_size >=0 && _params->nperio_tx_fifo_size < _core_if->params.nperio_tx_fifo_size)
++			_core_if->params.nperio_tx_fifo_size = _params->nperio_tx_fifo_size;
++		if( _params->perio_tx_fifo_size >=0 && _params->perio_tx_fifo_size < _core_if->params.perio_tx_fifo_size)
++			_core_if->params.perio_tx_fifo_size = _params->perio_tx_fifo_size;
++
++		if(_core_if->params.data_fifo_size < _core_if->params.rx_fifo_size)
++			_core_if->params.rx_fifo_size = _core_if->params.data_fifo_size;
++		ifxusb_wreg( &global_regs->grxfsiz, _core_if->params.rx_fifo_size);
++		txfifosize.b.startaddr = _core_if->params.rx_fifo_size;
++
++		if(txfifosize.b.startaddr + _core_if->params.nperio_tx_fifo_size > _core_if->params.data_fifo_size)
++			_core_if->params.nperio_tx_fifo_size = _core_if->params.data_fifo_size - txfifosize.b.startaddr;
++		txfifosize.b.depth=_core_if->params.nperio_tx_fifo_size;
++		ifxusb_wreg( &global_regs->gnptxfsiz, txfifosize.d32);
++		txfifosize.b.startaddr += _core_if->params.nperio_tx_fifo_size;
++
++		if(txfifosize.b.startaddr + _core_if->params.perio_tx_fifo_size > _core_if->params.data_fifo_size)
++			_core_if->params.perio_tx_fifo_size = _core_if->params.data_fifo_size - txfifosize.b.startaddr;
++		txfifosize.b.depth=_core_if->params.perio_tx_fifo_size;
++		ifxusb_wreg( &global_regs->hptxfsiz, txfifosize.d32);
++		txfifosize.b.startaddr += _core_if->params.perio_tx_fifo_size;
++	}
++
++	#ifdef __DEBUG__
++	{
++		fifosize_data_t fifosize;
++		IFX_DEBUGPL(DBG_CIL, "Result : FIFO Size=0x%06X\n"   , _core_if->params.data_fifo_size);
++
++		fifosize.d32=ifxusb_rreg(&global_regs->grxfsiz);
++		IFX_DEBUGPL(DBG_CIL, "         Rx FIFO =0x%06X 0x%06X\n", fifosize.b.startaddr,fifosize.b.depth);
++		fifosize.d32=ifxusb_rreg(&global_regs->gnptxfsiz);
++		IFX_DEBUGPL(DBG_CIL, "         NPTx FIFO =0x%06X 0x%06X\n", fifosize.b.startaddr,fifosize.b.depth);
++		fifosize.d32=ifxusb_rreg(&global_regs->hptxfsiz);
++		IFX_DEBUGPL(DBG_CIL, "          PTx FIFO =0x%06X 0x%06X\n", fifosize.b.startaddr,fifosize.b.depth);
++	}
++	#endif
++
++	/* Clear Host Set HNP Enable in the OTG Control Register */
++	gotgctl.b.hstsethnpen = 1;
++	ifxusb_mreg( &global_regs->gotgctl, gotgctl.d32, 0);
++
++	/* Flush the FIFOs */
++	ifxusb_flush_tx_fifo(_core_if, 0x10);  /* all Tx FIFOs */
++	ifxusb_flush_rx_fifo(_core_if);
++
++	for (i = 0; i < _core_if->hwcfg2.b.num_host_chan + 1; i++)
++	{
++		hcchar_data_t    hcchar;
++		hcchar.d32 = ifxusb_rreg(&_core_if->hc_regs[i]->hcchar);
++		hcchar.b.chen  = 0;
++		hcchar.b.chdis = 1;
++		hcchar.b.epdir = 0;
++		ifxusb_wreg(&_core_if->hc_regs[i]->hcchar, hcchar.d32);
++	}
++	/* Halt all channels to put them into a known state. */
++	for (i = 0; i < _core_if->hwcfg2.b.num_host_chan + 1; i++)
++	{
++		hcchar_data_t    hcchar;
++		int count = 0;
++
++		hcchar.d32 = ifxusb_rreg(&_core_if->hc_regs[i]->hcchar);
++		hcchar.b.chen  = 1;
++		hcchar.b.chdis = 1;
++		hcchar.b.epdir = 0;
++		ifxusb_wreg(&_core_if->hc_regs[i]->hcchar, hcchar.d32);
++
++		IFX_DEBUGPL(DBG_HCDV, "%s: Halt channel %d\n", __func__, i);
++		do{
++			hcchar.d32 = ifxusb_rreg(&_core_if->hc_regs[i]->hcchar);
++			if (++count > 1000)
++			{
++				IFX_ERROR("%s: Unable to clear halt on channel %d\n", __func__, i);
++				break;
++			}
++		} while (hcchar.b.chen);
++	}
++}
++
++//////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++
++#if defined(__UEIP__)
++	#if defined(IFX_GPIO_USB_VBUS) || defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS)
++		int ifxusb_vbus_status =-1;
++	#endif
++
++	#if defined(IFX_GPIO_USB_VBUS1) || defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1)
++		int ifxusb_vbus1_status =-1;
++	#endif
++
++	#if defined(IFX_GPIO_USB_VBUS2) || defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2)
++		int ifxusb_vbus2_status =-1;
++	#endif
++
++	#if defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS)
++		static void *g_usb_vbus_trigger  = NULL;
++	#endif
++	#if defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1)
++		static void *g_usb_vbus1_trigger = NULL;
++	#endif
++	#if defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2)
++		static void *g_usb_vbus2_trigger = NULL;
++	#endif
++
++	#if defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
++		int ifxusb_vbus_gpio_inited=0;
++	#endif
++
++#else //defined(__UEIP__)
++	int ifxusb_vbus_gpio_inited=0;
++#endif
++
++//////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++
++void ifxusb_vbus_init(ifxusb_core_if_t *_core_if)
++{
++	#if defined(__UEIP__)
++		#if defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS)
++			if ( !g_usb_vbus_trigger )
++			{
++				ifx_led_trigger_register("USB_VBUS", &g_usb_vbus_trigger);
++				if ( g_usb_vbus_trigger != NULL )
++				{
++					struct ifx_led_trigger_attrib attrib = {0};
++					attrib.delay_on     = 0;
++					attrib.delay_off    = 0;
++					attrib.timeout      = 0;
++					attrib.def_value    = 0;
++					attrib.flags        = IFX_LED_TRIGGER_ATTRIB_DELAY_ON | IFX_LED_TRIGGER_ATTRIB_DELAY_OFF | IFX_LED_TRIGGER_ATTRIB_TIMEOUT | IFX_LED_TRIGGER_ATTRIB_DEF_VALUE;
++					IFX_DEBUGP("Reg USB power!!\n");
++					ifx_led_trigger_set_attrib(g_usb_vbus_trigger, &attrib);
++					ifxusb_vbus_status =0;
++				}
++			}
++		#endif
++		#if defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1)
++			if(_core_if->core_no==0 && !g_usb_vbus1_trigger )
++			{
++				ifx_led_trigger_register("USB_VBUS1", &g_usb_vbus1_trigger);
++				if ( g_usb_vbus1_trigger != NULL )
++				{
++					struct ifx_led_trigger_attrib attrib = {0};
++					attrib.delay_on     = 0;
++					attrib.delay_off    = 0;
++					attrib.timeout      = 0;
++					attrib.def_value    = 0;
++					attrib.flags        = IFX_LED_TRIGGER_ATTRIB_DELAY_ON | IFX_LED_TRIGGER_ATTRIB_DELAY_OFF | IFX_LED_TRIGGER_ATTRIB_TIMEOUT | IFX_LED_TRIGGER_ATTRIB_DEF_VALUE;
++					IFX_DEBUGP("Reg USB1 power!!\n");
++					ifx_led_trigger_set_attrib(g_usb_vbus1_trigger, &attrib);
++					ifxusb_vbus1_status =0;
++				}
++			}
++		#endif
++		#if defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2)
++			if(_core_if->core_no==1 && !g_usb_vbus2_trigger )
++			{
++				ifx_led_trigger_register("USB_VBUS2", &g_usb_vbus2_trigger);
++				if ( g_usb_vbus2_trigger != NULL )
++				{
++					struct ifx_led_trigger_attrib attrib = {0};
++					attrib.delay_on     = 0;
++					attrib.delay_off    = 0;
++					attrib.timeout      = 0;
++					attrib.def_value    = 0;
++					attrib.flags        = IFX_LED_TRIGGER_ATTRIB_DELAY_ON | IFX_LED_TRIGGER_ATTRIB_DELAY_OFF | IFX_LED_TRIGGER_ATTRIB_TIMEOUT | IFX_LED_TRIGGER_ATTRIB_DEF_VALUE;
++					IFX_DEBUGP("Reg USB2 power!!\n");
++					ifx_led_trigger_set_attrib(g_usb_vbus2_trigger, &attrib);
++					ifxusb_vbus2_status =0;
++				}
++			}
++		#endif
++
++		#if defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
++			/* == 20100712 AVM/WK use gpio_inited as bitmask == */
++			if(ifxusb_vbus_gpio_inited == 0)
++			{
++				if(!ifx_gpio_register(IFX_GPIO_MODULE_USB))
++				{
++					IFX_DEBUGP("Register USB VBus through GPIO OK!!\n");
++					#ifdef IFX_GPIO_USB_VBUS
++						ifxusb_vbus_status =0;
++					#endif //IFX_GPIO_USB_VBUS
++					#ifdef IFX_GPIO_USB_VBUS1
++						ifxusb_vbus1_status=0;
++					#endif //IFX_GPIO_USB_VBUS1
++					#ifdef IFX_GPIO_USB_VBUS2
++						ifxusb_vbus2_status=0;
++					#endif //IFX_GPIO_USB_VBUS2
++					ifxusb_vbus_gpio_inited|= (1<<_core_if->core_no);
++				}
++				else
++					IFX_PRINT("Register USB VBus Failed!!\n");
++			} else {
++				ifxusb_vbus_gpio_inited|= (1<<_core_if->core_no);
++			}
++		#endif //defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
++	#endif //defined(__UEIP__)
++}
++
++void ifxusb_vbus_free(ifxusb_core_if_t *_core_if)
++{
++	#if defined(__UEIP__)
++		#if defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS)
++			if ( g_usb_vbus_trigger )
++			{
++			    ifx_led_trigger_deregister(g_usb_vbus_trigger);
++			    g_usb_vbus_trigger = NULL;
++			    ifxusb_vbus_status =-1;
++			}
++		#endif
++		#if defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1)
++			if(_core_if->core_no==0 && g_usb_vbus1_trigger )
++			{
++			    ifx_led_trigger_deregister(g_usb_vbus1_trigger);
++			    g_usb_vbus1_trigger = NULL;
++			    ifxusb_vbus1_status =-1;
++			}
++		#endif
++		#if defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2)
++			if(_core_if->core_no==1 && g_usb_vbus2_trigger )
++			{
++			    ifx_led_trigger_deregister(g_usb_vbus2_trigger);
++			    g_usb_vbus2_trigger = NULL;
++			    ifxusb_vbus2_status =-1;
++			}
++		#endif
++
++		#if defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
++			/* == 20100712 AVM/WK use gpio_inited as bitmask == */
++			if((ifxusb_vbus_gpio_inited & (1<<_core_if->core_no)) == ifxusb_vbus_gpio_inited)
++			{
++				ifx_gpio_deregister(IFX_GPIO_MODULE_USB);
++				#ifdef IFX_GPIO_USB_VBUS
++					ifxusb_vbus_status =-1;
++				#endif //IFX_GPIO_USB_VBUS
++				#ifdef IFX_GPIO_USB_VBUS1
++					ifxusb_vbus1_status=-1;
++				#endif //IFX_GPIO_USB_VBUS1
++				#ifdef IFX_GPIO_USB_VBUS2
++					ifxusb_vbus2_status=-1;
++				#endif //IFX_GPIO_USB_VBUS2
++			}
++			ifxusb_vbus_gpio_inited &= ~(1<<_core_if->core_no);
++		#endif //defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
++	#endif //defined(__UEIP__)
++}
++
++
++/*!
++   \brief Turn on the USB 5V VBus Power
++   \param _core_if        Pointer of core_if structure
++ */
++void ifxusb_vbus_on(ifxusb_core_if_t *_core_if)
++{
++	IFX_DEBUGP("SENDING VBus POWER UP\n");
++	#if defined(__UEIP__)
++		#if defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS)
++			if ( g_usb_vbus_trigger && ifxusb_vbus_status==0)
++			{
++				ifx_led_trigger_activate(g_usb_vbus_trigger);
++				IFX_DEBUGP("Enable USB power!!\n");
++				ifxusb_vbus_status=1;
++			}
++		#endif
++		#if defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1)
++			if(_core_if->core_no==0 && g_usb_vbus1_trigger && ifxusb_vbus1_status==0)
++			{
++				ifx_led_trigger_activate(g_usb_vbus1_trigger);
++				IFX_DEBUGP("Enable USB1 power!!\n");
++				ifxusb_vbus1_status=1;
++			}
++		#endif
++		#if defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2)
++			if(_core_if->core_no==1 && g_usb_vbus2_trigger && ifxusb_vbus2_status==0)
++			{
++				ifx_led_trigger_activate(g_usb_vbus2_trigger);
++				IFX_DEBUGP("Enable USB2 power!!\n");
++				ifxusb_vbus2_status=1;
++			}
++		#endif
++
++		#if defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
++			if(ifxusb_vbus_gpio_inited)
++			{
++				#if defined(IFX_GPIO_USB_VBUS)
++					if(ifxusb_vbus_status==0)
++					{
++						ifx_gpio_output_set(IFX_GPIO_USB_VBUS,IFX_GPIO_MODULE_USB);
++						ifxusb_vbus_status=1;
++					}
++				#endif
++				#if defined(IFX_GPIO_USB_VBUS1)
++					if(_core_if->core_no==0 && ifxusb_vbus1_status==0)
++					{
++						ifx_gpio_output_set(IFX_GPIO_USB_VBUS1,IFX_GPIO_MODULE_USB);
++						ifxusb_vbus1_status=1;
++					}
++				#endif
++				#if defined(IFX_GPIO_USB_VBUS2)
++					if(_core_if->core_no==1 && ifxusb_vbus2_status==0)
++					{
++						ifx_gpio_output_set(IFX_GPIO_USB_VBUS2,IFX_GPIO_MODULE_USB);
++						ifxusb_vbus2_status=1;
++					}
++				#endif
++			}
++		#endif //defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
++	#else
++		#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++			ifxusb_vbus_status=1;
++			//usb_set_vbus_on();
++		#endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++		#if defined(__IS_AMAZON_SE__)
++			set_bit (4, (volatile unsigned long *)AMAZON_SE_GPIO_P0_OUT);
++			ifxusb_vbus_status=1;
++		#endif //defined(__IS_AMAZON_SE__)
++		#if defined(__IS_AR9__)
++			if(_core_if->core_no==0)
++			{
++				if (bsp_port_reserve_pin(1, 13, PORT_MODULE_USB) != 0)
++				{
++					IFX_PRINT("Can't enable USB1 5.5V power!!\n");
++					return;
++				}
++				bsp_port_clear_altsel0(1, 13, PORT_MODULE_USB);
++				bsp_port_clear_altsel1(1, 13, PORT_MODULE_USB);
++				bsp_port_set_dir_out(1, 13, PORT_MODULE_USB);
++				bsp_port_set_pudsel(1, 13, PORT_MODULE_USB);
++				bsp_port_set_puden(1, 13, PORT_MODULE_USB);
++				bsp_port_set_output(1, 13, PORT_MODULE_USB);
++				IFX_DEBUGP("Enable USB1 power!!\n");
++				ifxusb_vbus1_status=1;
++			}
++			else
++			{
++				if (bsp_port_reserve_pin(3, 4, PORT_MODULE_USB) != 0)
++				{
++					IFX_PRINT("Can't enable USB2 5.5V power!!\n");
++					return;
++				}
++				bsp_port_clear_altsel0(3, 4, PORT_MODULE_USB);
++				bsp_port_clear_altsel1(3, 4, PORT_MODULE_USB);
++				bsp_port_set_dir_out(3, 4, PORT_MODULE_USB);
++				bsp_port_set_pudsel(3, 4, PORT_MODULE_USB);
++				bsp_port_set_puden(3, 4, PORT_MODULE_USB);
++				bsp_port_set_output(3, 4, PORT_MODULE_USB);
++				IFX_DEBUGP("Enable USB2 power!!\n");
++				ifxusb_vbus2_status=1;
++			}
++		#endif //defined(__IS_AR9__)
++		#if defined(__IS_VR9__)
++			if(_core_if->core_no==0)
++			{
++				ifxusb_vbus1_status=1;
++			}
++			else
++			{
++				ifxusb_vbus2_status=1;
++			}
++		#endif //defined(__IS_VR9__)
++	#endif //defined(__UEIP__)
++}
++
++
++/*!
++   \brief Turn off the USB 5V VBus Power
++   \param _core_if        Pointer of core_if structure
++ */
++void ifxusb_vbus_off(ifxusb_core_if_t *_core_if)
++{
++	IFX_DEBUGP("SENDING VBus POWER OFF\n");
++
++	#if defined(__UEIP__)
++		#if defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS)
++			if ( g_usb_vbus_trigger && ifxusb_vbus_status==1)
++			{
++				ifx_led_trigger_deactivate(g_usb_vbus_trigger);
++				IFX_DEBUGP("Disable USB power!!\n");
++				ifxusb_vbus_status=0;
++			}
++		#endif
++		#if defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1)
++			if(_core_if->core_no==0 && g_usb_vbus1_trigger && ifxusb_vbus1_status==1)
++			{
++				ifx_led_trigger_deactivate(g_usb_vbus1_trigger);
++				IFX_DEBUGP("Disable USB1 power!!\n");
++				ifxusb_vbus1_status=0;
++			}
++		#endif
++		#if defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2)
++			if(_core_if->core_no==1 && g_usb_vbus2_trigger && ifxusb_vbus2_status==1)
++			{
++				ifx_led_trigger_deactivate(g_usb_vbus2_trigger);
++				IFX_DEBUGP("Disable USB2 power!!\n");
++				ifxusb_vbus2_status=0;
++			}
++		#endif
++
++		#if defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
++			if(ifxusb_vbus_gpio_inited)
++			{
++				#if defined(IFX_GPIO_USB_VBUS)
++					if(ifxusb_vbus_status==1)
++					{
++						ifx_gpio_output_clear(IFX_GPIO_USB_VBUS,IFX_GPIO_MODULE_USB);
++						ifxusb_vbus_status=0;
++					}
++				#endif
++				#if defined(IFX_GPIO_USB_VBUS1)
++					if(_core_if->core_no==0 && ifxusb_vbus1_status==1)
++					{
++						ifx_gpio_output_clear(IFX_GPIO_USB_VBUS1,IFX_GPIO_MODULE_USB);
++						ifxusb_vbus1_status=0;
++					}
++				#endif
++				#if defined(IFX_GPIO_USB_VBUS2)
++					if(_core_if->core_no==1 && ifxusb_vbus2_status==1)
++					{
++						ifx_gpio_output_clear(IFX_GPIO_USB_VBUS2,IFX_GPIO_MODULE_USB);
++						ifxusb_vbus2_status=0;
++					}
++				#endif
++			}
++		#endif //defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
++	#else
++		#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++			ifxusb_vbus_status=0;
++			//usb_set_vbus_on();
++		#endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++		#if defined(__IS_AMAZON_SE__)
++			clear_bit (4, (volatile unsigned long *)AMAZON_SE_GPIO_P0_OUT);
++			ifxusb_vbus_status=0;
++		#endif //defined(__IS_AMAZON_SE__)
++		#if defined(__IS_AR9__)
++			if(_core_if->core_no==0)
++			{
++				if (bsp_port_reserve_pin(1, 13, PORT_MODULE_USB) != 0) {
++					IFX_PRINT("Can't Disable USB1 5.5V power!!\n");
++					return;
++				}
++				bsp_port_clear_altsel0(1, 13, PORT_MODULE_USB);
++				bsp_port_clear_altsel1(1, 13, PORT_MODULE_USB);
++				bsp_port_set_dir_out(1, 13, PORT_MODULE_USB);
++				bsp_port_set_pudsel(1, 13, PORT_MODULE_USB);
++				bsp_port_set_puden(1, 13, PORT_MODULE_USB);
++				bsp_port_clear_output(1, 13, PORT_MODULE_USB);
++				IFX_DEBUGP("Disable USB1 power!!\n");
++				ifxusb_vbus1_status=0;
++			}
++			else
++			{
++				if (bsp_port_reserve_pin(3, 4, PORT_MODULE_USB) != 0) {
++					IFX_PRINT("Can't Disable USB2 5.5V power!!\n");
++					return;
++				}
++				bsp_port_clear_altsel0(3, 4, PORT_MODULE_USB);
++				bsp_port_clear_altsel1(3, 4, PORT_MODULE_USB);
++				bsp_port_set_dir_out(3, 4, PORT_MODULE_USB);
++				bsp_port_set_pudsel(3, 4, PORT_MODULE_USB);
++				bsp_port_set_puden(3, 4, PORT_MODULE_USB);
++				bsp_port_clear_output(3, 4, PORT_MODULE_USB);
++				IFX_DEBUGP("Disable USB2 power!!\n");
++
++				ifxusb_vbus2_status=0;
++			}
++		#endif //defined(__IS_AR9__)
++		#if defined(__IS_VR9__)
++			if(_core_if->core_no==0)
++			{
++				ifxusb_vbus1_status=0;
++			}
++			else
++			{
++				ifxusb_vbus2_status=0;
++			}
++		#endif //defined(__IS_VR9__)
++	#endif //defined(__UEIP__)
++}
++
++
++
++/*!
++   \brief Read Current VBus status
++   \param _core_if        Pointer of core_if structure
++ */
++int ifxusb_vbus(ifxusb_core_if_t *_core_if)
++{
++#if defined(__UEIP__)
++	#if defined(IFX_GPIO_USB_VBUS) || defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS)
++		return (ifxusb_vbus_status);
++	#endif
++
++	#if defined(IFX_GPIO_USB_VBUS1) || defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1)
++		if(_core_if->core_no==0)
++			return (ifxusb_vbus1_status);
++	#endif
++
++	#if defined(IFX_GPIO_USB_VBUS2) || defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2)
++		if(_core_if->core_no==1)
++			return (ifxusb_vbus2_status);
++	#endif
++#else //defined(__UEIP__)
++#endif
++	return -1;
++}
++
++#if defined(__UEIP__)
++#else
++	#if defined(__IS_TWINPASS__)
++		#define ADSL_BASE 0x20000
++		#define CRI_BASE          0x31F00
++		#define CRI_CCR0          CRI_BASE + 0x00
++		#define CRI_CCR1          CRI_BASE + 0x01*4
++		#define CRI_CDC0          CRI_BASE + 0x02*4
++		#define CRI_CDC1          CRI_BASE + 0x03*4
++		#define CRI_RST           CRI_BASE + 0x04*4
++		#define CRI_MASK0         CRI_BASE + 0x05*4
++		#define CRI_MASK1         CRI_BASE + 0x06*4
++		#define CRI_MASK2         CRI_BASE + 0x07*4
++		#define CRI_STATUS0       CRI_BASE + 0x08*4
++		#define CRI_STATUS1       CRI_BASE + 0x09*4
++		#define CRI_STATUS2       CRI_BASE + 0x0A*4
++		#define CRI_AMASK0        CRI_BASE + 0x0B*4
++		#define CRI_AMASK1        CRI_BASE + 0x0C*4
++		#define CRI_UPDCTL        CRI_BASE + 0x0D*4
++		#define CRI_MADST         CRI_BASE + 0x0E*4
++		// 0x0f is missing
++		#define CRI_EVENT0        CRI_BASE + 0x10*4
++		#define CRI_EVENT1        CRI_BASE + 0x11*4
++		#define CRI_EVENT2        CRI_BASE + 0x12*4
++
++		#define IRI_I_ENABLE    0x32000
++		#define STY_SMODE       0x3c004
++		#define AFE_TCR_0       0x3c0dc
++		#define AFE_ADDR_ADDR   0x3c0e8
++		#define AFE_RDATA_ADDR  0x3c0ec
++		#define AFE_WDATA_ADDR  0x3c0f0
++		#define AFE_CONFIG      0x3c0f4
++		#define AFE_SERIAL_CFG  0x3c0fc
++
++		#define DFE_BASE_ADDR         0xBE116000
++		//#define DFE_BASE_ADDR         0x9E116000
++
++		#define MEI_FR_ARCINT_C       (DFE_BASE_ADDR + 0x0000001C)
++		#define MEI_DBG_WADDR_C       (DFE_BASE_ADDR + 0x00000024)
++		#define MEI_DBG_RADDR_C       (DFE_BASE_ADDR + 0x00000028)
++		#define MEI_DBG_DATA_C        (DFE_BASE_ADDR + 0x0000002C)
++		#define MEI_DBG_DECO_C        (DFE_BASE_ADDR + 0x00000030)
++		#define MEI_DBG_MASTER_C      (DFE_BASE_ADDR + 0x0000003C)
++
++		static void WriteARCmem(uint32_t addr, uint32_t data)
++		{
++			writel(1    ,(volatile uint32_t *)MEI_DBG_MASTER_C);
++			writel(1    ,(volatile uint32_t *)MEI_DBG_DECO_C  );
++			writel(addr ,(volatile uint32_t *)MEI_DBG_WADDR_C  );
++			writel(data ,(volatile uint32_t *)MEI_DBG_DATA_C  );
++			while( (ifxusb_rreg((volatile uint32_t *)MEI_FR_ARCINT_C) & 0x20) != 0x20 ){};
++			writel(0    ,(volatile uint32_t *)MEI_DBG_MASTER_C);
++			IFX_DEBUGP("WriteARCmem %08x %08x\n",addr,data);
++		};
++
++		static uint32_t ReadARCmem(uint32_t addr)
++		{
++			u32 data;
++			writel(1    ,(volatile uint32_t *)MEI_DBG_MASTER_C);
++			writel(1    ,(volatile uint32_t *)MEI_DBG_DECO_C  );
++			writel(addr ,(volatile uint32_t *)MEI_DBG_RADDR_C  );
++			while( (ifxusb_rreg((volatile uint32_t *)MEI_FR_ARCINT_C) & 0x20) != 0x20 ){};
++			data = ifxusb_rreg((volatile uint32_t *)MEI_DBG_DATA_C  );
++			writel(0    ,(volatile uint32_t *)MEI_DBG_MASTER_C);
++			IFX_DEBUGP("ReadARCmem %08x %08x\n",addr,data);
++		  return data;
++		};
++
++		void ifxusb_enable_afe_oc(void)
++		{
++			/* Start the clock */
++			WriteARCmem(CRI_UPDCTL    ,0x00000008);
++			WriteARCmem(CRI_CCR0      ,0x00000014);
++			WriteARCmem(CRI_CCR1      ,0x00000500);
++			WriteARCmem(AFE_CONFIG    ,0x000001c8);
++			WriteARCmem(AFE_SERIAL_CFG,0x00000016); // (DANUBE_PCI_CFG_BASE+(1<<addrline))AFE serial interface clock & data latch edge
++			WriteARCmem(AFE_TCR_0     ,0x00000002);
++			//Take afe out of reset
++			WriteARCmem(AFE_CONFIG    ,0x000000c0);
++			WriteARCmem(IRI_I_ENABLE  ,0x00000101);
++			WriteARCmem(STY_SMODE     ,0x00001980);
++
++			ReadARCmem(CRI_UPDCTL    );
++			ReadARCmem(CRI_CCR0      );
++			ReadARCmem(CRI_CCR1      );
++			ReadARCmem(AFE_CONFIG    );
++			ReadARCmem(AFE_SERIAL_CFG); // (DANUBE_PCI_CFG_BASE+(1<<addrline))AFE serial interface clock & data latch edge
++			ReadARCmem(AFE_TCR_0     );
++			ReadARCmem(AFE_CONFIG    );
++			ReadARCmem(IRI_I_ENABLE  );
++			ReadARCmem(STY_SMODE     );
++		}
++	#endif  //defined(__IS_TWINPASS__)
++#endif //defined(__UEIP__)
++
++
+diff --git a/drivers/usb/ifxhcd/ifxusb_ctl.c b/drivers/usb/ifxhcd/ifxusb_ctl.c
+new file mode 100644
+index 0000000..ade8e13
+--- /dev/null
++++ b/drivers/usb/ifxhcd/ifxusb_ctl.c
+@@ -0,0 +1,1385 @@
++/*****************************************************************************
++ **   FILE NAME       : ifxusb_ctl.c
++ **   PROJECT         : IFX USB sub-system V3
++ **   MODULES         : IFX USB sub-system Host and Device driver
++ **   SRC VERSION     : 1.0
++ **   DATE            : 1/Jan/2009
++ **   AUTHOR          : Chen, Howard
++ **   DESCRIPTION     : Implementing the procfs and sysfs for IFX USB driver
++ *****************************************************************************/
++
++/*! \file ifxusb_ctl.c
++  \ingroup IFXUSB_DRIVER_V3
++    \brief Implementing the procfs and sysfs for IFX USB driver
++*/
++
++#include <linux/version.h>
++#include "ifxusb_version.h"
++
++
++#include <linux/proc_fs.h>
++#include <asm/byteorder.h>
++#include <asm/unaligned.h>
++#include <asm/uaccess.h>
++
++#include "ifxusb_plat.h"
++#include "ifxusb_regs.h"
++#include "ifxusb_cif.h"
++
++#ifdef __IS_DEVICE__
++	#include "ifxpcd.h"
++#endif
++
++#ifdef __IS_HOST__
++	#include "ifxhcd.h"
++#endif
++
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/gfp.h>
++
++
++#ifdef __IS_HOST__
++	extern char ifxusb_driver_name[];
++
++	#ifdef __IS_DUAL__
++		extern ifxhcd_hcd_t ifxusb_hcd_1;
++		extern ifxhcd_hcd_t ifxusb_hcd_2;
++		extern char ifxusb_hcd_name_1[];
++		extern char ifxusb_hcd_name_2[];
++	#else
++		extern ifxhcd_hcd_t ifxusb_hcd;
++		extern char ifxusb_hcd_name[];
++	#endif
++
++#endif
++
++#ifdef __IS_DEVICE__
++	extern char ifxusb_driver_name[];
++
++	extern ifxpcd_pcd_t ifxusb_pcd;
++	extern char ifxusb_pcd_name[];
++#endif
++
++
++//Attributes for sysfs (for 2.6 only)
++
++extern struct device_attribute dev_attr_dbglevel;
++
++#ifdef __IS_DUAL__
++	extern struct device_attribute dev_attr_dump_params_1;
++	extern struct device_attribute dev_attr_dump_params_2;
++#else
++	extern struct device_attribute dev_attr_dump_params;
++#endif
++
++#ifdef __IS_DUAL__
++	extern struct device_attribute dev_attr_mode_1;
++	extern struct device_attribute dev_attr_mode_2;
++#else
++	extern struct device_attribute dev_attr_mode;
++#endif
++
++#ifdef __IS_HOST__
++	#ifdef __IS_DUAL__
++		extern struct device_attribute dev_attr_buspower_1;
++		extern struct device_attribute dev_attr_buspower_2;
++		extern struct device_attribute dev_attr_bussuspend_1;
++		extern struct device_attribute dev_attr_bussuspend_2;
++		extern struct device_attribute dev_attr_busconnected_1;
++		extern struct device_attribute dev_attr_busconnected_2;
++		extern struct device_attribute dev_attr_connectspeed_1;
++		extern struct device_attribute dev_attr_connectspeed_1;
++	#else
++		extern struct device_attribute dev_attr_buspower;
++		extern struct device_attribute dev_attr_bussuspend;
++		extern struct device_attribute dev_attr_busconnected;
++		extern struct device_attribute dev_attr_connectspeed;
++	#endif
++#endif //__IS_HOST__
++
++#ifdef __IS_DEVICE__
++	extern struct device_attribute dev_attr_devspeed;
++	extern struct device_attribute dev_attr_enumspeed;
++#endif //__IS_DEVICE__
++
++#ifdef __ENABLE_DUMP__
++	#ifdef __IS_DUAL__
++		extern struct device_attribute dev_attr_dump_reg_1;
++		extern struct device_attribute dev_attr_dump_reg_2;
++		extern struct device_attribute dev_attr_dump_spram_1;
++		extern struct device_attribute dev_attr_dump_spram_2;
++		#ifdef __IS_HOST__
++			extern struct device_attribute dev_attr_dump_host_state_1;
++			extern struct device_attribute dev_attr_dump_host_state_2;
++		#else
++		#endif
++	#else
++		extern struct device_attribute dev_attr_dump_reg;
++		extern struct device_attribute dev_attr_dump_spram;
++		#ifdef __IS_HOST__
++			extern struct device_attribute dev_attr_dump_host_state;
++		#else
++		#endif
++	#endif
++#endif //__ENABLE_DUMP__
++
++
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++
++static ssize_t procfs_dbglevel_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++{
++	#ifdef __IS_HOST__
++		return sprintf( buf, "%08X\n",h_dbg_lvl );
++	#else
++		return sprintf( buf, "%08X\n",d_dbg_lvl );
++	#endif
++}
++
++static ssize_t procfs_dbglevel_store(struct file *file, const char *buffer, unsigned long count, void *data)
++{
++	char buf[10];
++	int i = 0;
++	uint32_t value;
++	if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
++		return -EFAULT;
++	value = simple_strtoul(buf, NULL, 16);
++	#ifdef __IS_HOST__
++		h_dbg_lvl =value;
++	#else
++		d_dbg_lvl =value;
++	#endif
++		//turn on and off power
++	return count;
++}
++
++#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++	static ssize_t sysfs_dbglevel_show( struct device *_dev, struct device_attribute *attr,char *buf)
++#else
++	static ssize_t sysfs_dbglevel_show( struct device *_dev,                               char *buf)
++#endif
++{
++	#ifdef __IS_HOST__
++		return sprintf( buf, "%08X\n",h_dbg_lvl );
++	#else
++		return sprintf( buf, "%08X\n",d_dbg_lvl );
++	#endif
++}
++
++#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++	static ssize_t sysfs_dbglevel_store( struct device *_dev, struct device_attribute *attr,const char *buffer, size_t count )
++#else
++    static ssize_t sysfs_dbglevel_store( struct device *_dev,                               const char *buffer, size_t count )
++#endif
++{
++	char buf[10];
++	int i = 0;
++	uint32_t value;
++	if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
++		return -EFAULT;
++	value = simple_strtoul(buf, NULL, 16);
++	#ifdef __IS_HOST__
++		h_dbg_lvl =value;
++	#else
++		d_dbg_lvl =value;
++	#endif
++		//turn on and off power
++	return count;
++}
++
++DEVICE_ATTR(dbglevel, S_IRUGO|S_IWUSR, sysfs_dbglevel_show, sysfs_dbglevel_store);
++
++
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++
++static void ifxusb_dump_params(ifxusb_core_if_t *_core_if);
++
++#ifdef __IS_DUAL__
++	static void dump_params_1(void)
++	{
++		ifxusb_dump_params(&ifxusb_hcd_1.core_if);
++	}
++	static void dump_params_2(void)
++	{
++		ifxusb_dump_params(&ifxusb_hcd_2.core_if);
++	}
++
++	static ssize_t procfs_dump_params_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++	{
++		dump_params_1();
++		return 0;
++	}
++	static ssize_t procfs_dump_params_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++	{
++		dump_params_2();
++		return 0;
++	}
++
++	#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++		static ssize_t sysfs_dump_params_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
++	#else
++		static ssize_t sysfs_dump_params_show_1( struct device *_dev,char *buf)
++	#endif
++	{
++		dump_params_1();
++		return 0;
++	}
++	DEVICE_ATTR(dump_params_1, S_IRUGO|S_IWUSR, sysfs_dump_params_show_1, NULL);
++
++	#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++		static ssize_t sysfs_dump_params_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
++	#else
++		static ssize_t sysfs_dump_params_show_2( struct device *_dev,char *buf)
++	#endif
++	{
++		dump_params_2();
++		return 0;
++	}
++
++	DEVICE_ATTR(dump_params_2, S_IRUGO|S_IWUSR, sysfs_dump_params_show_2, NULL);
++#else
++	static void dump_params(void)
++	{
++		#ifdef __IS_HOST__
++			ifxusb_dump_params(&ifxusb_hcd.core_if);
++		#else
++			ifxusb_dump_params(&ifxusb_pcd.core_if);
++		#endif
++	}
++
++	static ssize_t procfs_dump_params_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++	{
++		dump_params();
++		return 0;
++	}
++
++	#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++		static ssize_t sysfs_dump_params_show( struct device *_dev, struct device_attribute *attr,char *buf)
++	#else
++		static ssize_t sysfs_dump_params_show( struct device *_dev,char *buf)
++	#endif
++	{
++		dump_params();
++		return 0;
++	}
++	DEVICE_ATTR(dump_params, S_IRUGO|S_IWUSR, sysfs_dump_params_show, NULL);
++#endif
++
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++
++#ifdef __IS_DUAL__
++	static ssize_t mode_show_1(char *buf)
++	{
++		if((ifxusb_rreg(&ifxusb_hcd_1.core_if.core_global_regs->gintsts ) & 0x1) == 1)
++			return sprintf( buf, "HOST\n" );
++		else
++			return sprintf( buf, "DEVICE(INCORRECT!)\n" );
++	}
++
++	static ssize_t mode_show_2(char *buf)
++	{
++		if((ifxusb_rreg(&ifxusb_hcd_2.core_if.core_global_regs->gintsts ) & 0x1) == 1)
++			return sprintf( buf, "HOST\n" );
++		else
++			return sprintf( buf, "DEVICE(INCORRECT!)\n" );
++	}
++
++	static ssize_t procfs_mode_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++	{
++		return mode_show_1(buf);
++	}
++	static ssize_t procfs_mode_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++	{
++		return mode_show_2(buf);
++	}
++
++	#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++		static ssize_t sysfs_mode_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
++	#else
++		static ssize_t sysfs_mode_show_1( struct device *_dev,char *buf)
++	#endif
++	{
++		return mode_show_1(buf);
++	}
++
++	DEVICE_ATTR(mode_1, S_IRUGO|S_IWUSR, sysfs_mode_show_1, 0);
++
++	#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++		static ssize_t sysfs_mode_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
++	#else
++		static ssize_t sysfs_mode_show_2( struct device *_dev,char *buf)
++	#endif
++	{
++		return mode_show_2(buf);
++	}
++	DEVICE_ATTR(mode_2, S_IRUGO|S_IWUSR, sysfs_mode_show_2, NULL);
++#else
++	static ssize_t mode_show(char *buf)
++	{
++		#ifdef __IS_HOST__
++			if((ifxusb_rreg(&ifxusb_hcd.core_if.core_global_regs->gintsts ) & 0x1) == 1)
++				return sprintf( buf, "HOST\n" );
++			else
++				return sprintf( buf, "DEVICE(INCORRECT!)\n" );
++		#else
++			if((ifxusb_rreg(&ifxusb_pcd.core_if.core_global_regs->gintsts ) & 0x1) != 1)
++				return sprintf( buf, "DEVICE\n" );
++			else
++				return sprintf( buf, "HOST(INCORRECT!)\n" );
++		#endif
++	}
++	static ssize_t procfs_mode_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++	{
++		return mode_show(buf);
++	}
++	#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++		static ssize_t sysfs_mode_show( struct device *_dev, struct device_attribute *attr,char *buf)
++	#else
++		static ssize_t sysfs_mode_show( struct device *_dev,                               char *buf)
++	#endif
++	{
++		return mode_show(buf);
++	}
++	DEVICE_ATTR(mode, S_IRUGO|S_IWUSR, sysfs_mode_show, NULL);
++#endif
++
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++
++#ifdef __IS_HOST__
++	#ifdef __IS_DUAL__
++		static ssize_t buspower_show_1(char *buf)
++		{
++			if(ifxusb_vbus (&ifxusb_hcd_1.core_if)==1) return sprintf( buf, "1\n" );
++			if(ifxusb_vbus (&ifxusb_hcd_1.core_if)==0) return sprintf( buf, "0\n" );
++			return sprintf( buf, "UNKNOWN\n" );
++		}
++		static void buspower_store_1(uint32_t value)
++		{
++			if     (value==1)  ifxusb_vbus_on (&ifxusb_hcd_1.core_if);
++			else if(value==0)  ifxusb_vbus_off(&ifxusb_hcd_1.core_if);
++		}
++		static ssize_t buspower_show_2(char *buf)
++		{
++			if(ifxusb_vbus (&ifxusb_hcd_2.core_if)==1) return sprintf( buf, "1\n" );
++			if(ifxusb_vbus (&ifxusb_hcd_2.core_if)==0) return sprintf( buf, "0\n" );
++			return sprintf( buf, "UNKNOWN\n" );
++		}
++		static void buspower_store_2(uint32_t value)
++		{
++			if     (value==1)  ifxusb_vbus_on (&ifxusb_hcd_2.core_if);
++			else if(value==0)  ifxusb_vbus_off(&ifxusb_hcd_2.core_if);
++		}
++		static ssize_t procfs_buspower_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++		{
++			return buspower_show_1(buf);
++		}
++		static ssize_t procfs_buspower_store_1(struct file *file, const char *buffer, unsigned long count, void *data)
++		{
++			char buf[10];
++			int i = 0;
++			uint32_t value;
++			if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
++				return -EFAULT;
++			value = simple_strtoul(buf, NULL, 16);
++			buspower_store_1(value);
++			return count;
++		}
++		static ssize_t procfs_buspower_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++		{
++			return buspower_show_2(buf);
++		}
++		static ssize_t procfs_buspower_store_2(struct file *file, const char *buffer, unsigned long count, void *data)
++		{
++			char buf[10];
++			int i = 0;
++			uint32_t value;
++			if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
++				return -EFAULT;
++			value = simple_strtoul(buf, NULL, 16);
++			buspower_store_2(value);
++			return count;
++		}
++
++		#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			static ssize_t sysfs_buspower_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
++		#else
++			static ssize_t sysfs_buspower_show_1( struct device *_dev,char *buf)
++		#endif
++		{
++			return buspower_show_1(buf);
++		}
++		#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			static ssize_t sysfs_buspower_store_1( struct device *_dev, struct device_attribute *attr,const char *buffer, size_t count )
++		#else
++		    static ssize_t sysfs_buspower_store_1( struct device *_dev,                               const char *buffer, size_t count )
++		#endif
++		{
++			char buf[10];
++			int i = 0;
++			uint32_t value;
++			if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
++				return -EFAULT;
++			value = simple_strtoul(buf, NULL, 16);
++			buspower_store_1(value);
++			return count;
++		}
++		DEVICE_ATTR(buspower_1, S_IRUGO|S_IWUSR, sysfs_buspower_show_1, sysfs_buspower_store_1);
++
++		#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			static ssize_t sysfs_buspower_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
++		#else
++			static ssize_t sysfs_buspower_show_2( struct device *_dev,char *buf)
++		#endif
++		{
++			return buspower_show_2(buf);
++		}
++		#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			static ssize_t sysfs_buspower_store_2( struct device *_dev, struct device_attribute *attr,const char *buffer, size_t count )
++		#else
++		    static ssize_t sysfs_buspower_store_2( struct device *_dev,                               const char *buffer, size_t count )
++		#endif
++		{
++			char buf[10];
++			int i = 0;
++			uint32_t value;
++			if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
++				return -EFAULT;
++			value = simple_strtoul(buf, NULL, 16);
++			buspower_store_2(value);
++			return count;
++		}
++		DEVICE_ATTR(buspower_2, S_IRUGO|S_IWUSR, sysfs_buspower_show_2, sysfs_buspower_store_2);
++	#else
++		static ssize_t buspower_show(char *buf)
++		{
++			if(ifxusb_vbus (&ifxusb_hcd.core_if)==1) return sprintf( buf, "1\n" );
++			if(ifxusb_vbus (&ifxusb_hcd.core_if)==0) return sprintf( buf, "0\n" );
++			return sprintf( buf, "UNKNOWN\n" );
++		}
++		static void buspower_store(uint32_t value)
++		{
++			if     (value==1)  ifxusb_vbus_on (&ifxusb_hcd.core_if);
++			else if(value==0)  ifxusb_vbus_off(&ifxusb_hcd.core_if);
++		}
++		static ssize_t procfs_buspower_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++		{
++			return buspower_show(buf);
++		}
++		static ssize_t procfs_buspower_store(struct file *file, const char *buffer, unsigned long count, void *data)
++		{
++			char buf[10];
++			int i = 0;
++			uint32_t value;
++			if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
++				return -EFAULT;
++			value = simple_strtoul(buf, NULL, 16);
++			buspower_store(value);
++			return count;
++		}
++		#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			static ssize_t sysfs_buspower_show( struct device *_dev, struct device_attribute *attr,char *buf)
++		#else
++			static ssize_t sysfs_buspower_show( struct device *_dev,                               char *buf)
++		#endif
++		{
++			return buspower_show(buf);
++		}
++		#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			static ssize_t sysfs_buspower_store( struct device *_dev, struct device_attribute *attr,const char *buffer, size_t count )
++		#else
++		    static ssize_t sysfs_buspower_store( struct device *_dev,                               const char *buffer, size_t count )
++		#endif
++		{
++			char buf[10];
++			int i = 0;
++			uint32_t value;
++			if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
++				return -EFAULT;
++			value = simple_strtoul(buf, NULL, 16);
++			buspower_store(value);
++			return count;
++		}
++		DEVICE_ATTR(buspower, S_IRUGO|S_IWUSR, sysfs_buspower_show, sysfs_buspower_store);
++	#endif
++
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++
++
++	#ifdef __IS_DUAL__
++		static ssize_t bussuspend_show_1(char *buf)
++		{
++			hprt0_data_t val;
++			val.d32 = ifxusb_rreg(ifxusb_hcd_1.core_if.hprt0);
++			return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp);
++		}
++		static ssize_t bussuspend_show_2(char *buf)
++		{
++			hprt0_data_t val;
++			val.d32 = ifxusb_rreg(ifxusb_hcd_2.core_if.hprt0);
++			return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp);
++		}
++
++		static ssize_t procfs_bussuspend_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++		{
++			return bussuspend_show_1(buf);
++		}
++		static ssize_t procfs_bussuspend_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++		{
++			return bussuspend_show_2(buf);
++		}
++		#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			static ssize_t sysfs_bussuspend_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
++		#else
++			static ssize_t sysfs_bussuspend_show_1( struct device *_dev,char *buf)
++		#endif
++		{
++			return bussuspend_show_1(buf);
++		}
++		DEVICE_ATTR(bussuspend_1, S_IRUGO|S_IWUSR, sysfs_bussuspend_show_1, 0);
++		#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			static ssize_t sysfs_bussuspend_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
++		#else
++			static ssize_t sysfs_bussuspend_show_2( struct device *_dev,char *buf)
++		#endif
++		{
++			return bussuspend_show_2(buf);
++		}
++		DEVICE_ATTR(bussuspend_2, S_IRUGO|S_IWUSR, sysfs_bussuspend_show_2, 0);
++	#else
++		static ssize_t bussuspend_show(char *buf)
++		{
++			hprt0_data_t val;
++			val.d32 = ifxusb_rreg(ifxusb_hcd.core_if.hprt0);
++			return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp);
++		}
++		static ssize_t procfs_bussuspend_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++		{
++			return bussuspend_show(buf);
++		}
++
++		#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			static ssize_t sysfs_bussuspend_show( struct device *_dev, struct device_attribute *attr,char *buf)
++		#else
++			static ssize_t sysfs_bussuspend_show( struct device *_dev,                               char *buf)
++		#endif
++		{
++			return bussuspend_show(buf);
++		}
++		DEVICE_ATTR(bussuspend, S_IRUGO|S_IWUSR, sysfs_bussuspend_show, 0);
++	#endif
++
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++
++	#ifdef __IS_DUAL__
++		static ssize_t busconnected_show_1(char *buf)
++		{
++			hprt0_data_t val;
++			val.d32 = ifxusb_rreg(ifxusb_hcd_1.core_if.hprt0);
++			return sprintf (buf, "Bus Connected = 0x%x\n", val.b.prtconnsts);
++		}
++		static ssize_t busconnected_show_2(char *buf)
++		{
++			hprt0_data_t val;
++			val.d32 = ifxusb_rreg(ifxusb_hcd_2.core_if.hprt0);
++			return sprintf (buf, "Bus Connected = 0x%x\n", val.b.prtconnsts);
++		}
++
++		static ssize_t procfs_busconnected_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++		{
++			return busconnected_show_1(buf);
++		}
++		static ssize_t procfs_busconnected_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++		{
++			return busconnected_show_2(buf);
++		}
++		#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			static ssize_t sysfs_busconnected_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
++		#else
++			static ssize_t sysfs_busconnected_show_1( struct device *_dev,char *buf)
++		#endif
++		{
++			return busconnected_show_1(buf);
++		}
++		DEVICE_ATTR(busconnected_1, S_IRUGO|S_IWUSR, sysfs_busconnected_show_1, 0);
++		#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			static ssize_t sysfs_busconnected_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
++		#else
++			static ssize_t sysfs_busconnected_show_2( struct device *_dev,char *buf)
++		#endif
++		{
++			return busconnected_show_2(buf);
++		}
++		DEVICE_ATTR(busconnected_2, S_IRUGO|S_IWUSR, sysfs_busconnected_show_2, 0);
++	#else
++		static ssize_t busconnected_show(char *buf)
++		{
++			hprt0_data_t val;
++			val.d32 = ifxusb_rreg(ifxusb_hcd.core_if.hprt0);
++			return sprintf (buf, "Bus Connected = 0x%x\n", val.b.prtconnsts);
++		}
++		static ssize_t procfs_busconnected_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++		{
++			return busconnected_show(buf);
++		}
++
++		#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			static ssize_t sysfs_busconnected_show( struct device *_dev, struct device_attribute *attr,char *buf)
++		#else
++			static ssize_t sysfs_busconnected_show( struct device *_dev,                               char *buf)
++		#endif
++		{
++			return busconnected_show(buf);
++		}
++		DEVICE_ATTR(busconnected, S_IRUGO|S_IWUSR, sysfs_busconnected_show, 0);
++	#endif
++
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++
++	#ifdef __IS_DUAL__
++		static ssize_t connectspeed_show_1(char *buf)
++		{
++			hprt0_data_t val;
++			val.d32 = ifxusb_rreg(ifxusb_hcd_1.core_if.hprt0);
++			if( val.b.prtspd ==0) return sprintf (buf, "Bus Speed = High (%d)\n", val.b.prtspd);
++			if( val.b.prtspd ==1) return sprintf (buf, "Bus Speed = Full (%d)\n", val.b.prtspd);
++			if( val.b.prtspd ==2) return sprintf (buf, "Bus Speed = Low  (%d)\n", val.b.prtspd);
++			                      return sprintf (buf, "Bus Speed = Unknown (%d)\n", val.b.prtspd);
++		}
++		static ssize_t connectspeed_show_2(char *buf)
++		{
++			hprt0_data_t val;
++			val.d32 = ifxusb_rreg(ifxusb_hcd_2.core_if.hprt0);
++			if( val.b.prtspd ==0) return sprintf (buf, "Bus Speed = High (%d)\n", val.b.prtspd);
++			if( val.b.prtspd ==1) return sprintf (buf, "Bus Speed = Full (%d)\n", val.b.prtspd);
++			if( val.b.prtspd ==2) return sprintf (buf, "Bus Speed = Low  (%d)\n", val.b.prtspd);
++			                      return sprintf (buf, "Bus Speed = Unknown (%d)\n", val.b.prtspd);
++		}
++
++		static ssize_t procfs_connectspeed_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++		{
++			return connectspeed_show_1(buf);
++		}
++		static ssize_t procfs_connectspeed_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++		{
++			return connectspeed_show_2(buf);
++		}
++		#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			static ssize_t sysfs_connectspeed_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
++		#else
++			static ssize_t sysfs_connectspeed_show_1( struct device *_dev,char *buf)
++		#endif
++		{
++			return connectspeed_show_1(buf);
++		}
++		DEVICE_ATTR(connectspeed_1, S_IRUGO|S_IWUSR, sysfs_connectspeed_show_1, 0);
++		#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			static ssize_t sysfs_connectspeed_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
++		#else
++			static ssize_t sysfs_connectspeed_show_2( struct device *_dev,char *buf)
++		#endif
++		{
++			return connectspeed_show_2(buf);
++		}
++		DEVICE_ATTR(connectspeed_2, S_IRUGO|S_IWUSR, sysfs_connectspeed_show_2, 0);
++	#else
++		static ssize_t connectspeed_show(char *buf)
++		{
++			hprt0_data_t val;
++			val.d32 = ifxusb_rreg(ifxusb_hcd.core_if.hprt0);
++			if( val.b.prtspd ==0) return sprintf (buf, "Bus Speed = High (%d)\n", val.b.prtspd);
++			if( val.b.prtspd ==1) return sprintf (buf, "Bus Speed = Full (%d)\n", val.b.prtspd);
++			if( val.b.prtspd ==2) return sprintf (buf, "Bus Speed = Low  (%d)\n", val.b.prtspd);
++			                      return sprintf (buf, "Bus Speed = Unknown (%d)\n", val.b.prtspd);
++		}
++
++		static ssize_t procfs_connectspeed_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++		{
++			return connectspeed_show(buf);
++		}
++
++		#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			static ssize_t sysfs_connectspeed_show( struct device *_dev, struct device_attribute *attr,char *buf)
++		#else
++			static ssize_t sysfs_connectspeed_show( struct device *_dev,                               char *buf)
++		#endif
++		{
++			return connectspeed_show(buf);
++		}
++		DEVICE_ATTR(connectspeed, S_IRUGO|S_IWUSR, sysfs_connectspeed_show, 0);
++	#endif
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++#endif
++
++
++#ifdef __IS_DEVICE__
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++	static ssize_t devspeed_show(char *buf)
++	{
++		dcfg_data_t val;
++		val.d32 = ifxusb_rreg(&ifxusb_pcd.core_if.dev_global_regs->dcfg);
++		if( val.b.devspd ==0) return sprintf (buf, "Dev Speed = High (%d)\n", val.b.devspd);
++		if( val.b.devspd ==1) return sprintf (buf, "Dev Speed = Full (%d)\n", val.b.devspd);
++		if( val.b.devspd ==3) return sprintf (buf, "Dev Speed = Full (%d)\n", val.b.devspd);
++		                      return sprintf (buf, "Dev Speed = Unknown (%d)\n", val.b.devspd);
++	}
++
++	static ssize_t procfs_devspeed_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++	{
++		return devspeed_show(buf);
++	}
++
++	#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++		static ssize_t sysfs_devspeed_show( struct device *_dev, struct device_attribute *attr,char *buf)
++	#else
++		static ssize_t sysfs_devspeed_show( struct device *_dev,                               char *buf)
++	#endif
++	{
++		return devspeed_show(buf);
++	}
++	DEVICE_ATTR(devspeed, S_IRUGO|S_IWUSR, sysfs_devspeed_show, 0);
++
++	static ssize_t enumspeed_show(char *buf)
++	{
++		dsts_data_t val;
++		val.d32 = ifxusb_rreg(&ifxusb_pcd.core_if.dev_global_regs->dsts);
++		if( val.b.enumspd ==0) return sprintf (buf, "Enum Speed = High (%d)\n", val.b.enumspd);
++		if( val.b.enumspd ==1) return sprintf (buf, "Enum Speed = Full (%d)\n", val.b.enumspd);
++		if( val.b.enumspd ==2) return sprintf (buf, "Enum Speed = Low  (%d)\n", val.b.enumspd);
++		return sprintf (buf, "Enum Speed = invalid(%d)\n", val.b.enumspd);
++	}
++
++	static ssize_t procfs_enumspeed_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++	{
++		return enumspeed_show(buf);
++	}
++
++	#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++		static ssize_t sysfs_enumspeed_show( struct device *_dev, struct device_attribute *attr,char *buf)
++	#else
++		static ssize_t sysfs_enumspeed_show( struct device *_dev,                               char *buf)
++	#endif
++	{
++		return enumspeed_show(buf);
++	}
++	DEVICE_ATTR(enumspeed, S_IRUGO|S_IWUSR, sysfs_enumspeed_show, 0);
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++#endif
++
++
++//////////////////////////////////////////////////////////////////////////////////
++#ifdef __ENABLE_DUMP__
++
++	#ifdef __IS_DUAL__
++		static void dump_reg_1(void)
++		{
++			ifxusb_dump_registers(&ifxusb_hcd_1.core_if);
++		}
++		static void dump_reg_2(void)
++		{
++			ifxusb_dump_registers(&ifxusb_hcd_2.core_if);
++		}
++
++		static ssize_t procfs_dump_reg_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++		{
++			dump_reg_1();
++			return 0;
++		}
++		static ssize_t procfs_dump_reg_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++		{
++			dump_reg_2();
++			return 0;
++		}
++		#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			static ssize_t sysfs_dump_reg_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
++		#else
++			static ssize_t sysfs_dump_reg_show_1( struct device *_dev,char *buf)
++		#endif
++		{
++			dump_reg_1();
++			return 0;
++		}
++		DEVICE_ATTR(dump_reg_1, S_IRUGO|S_IWUSR, sysfs_dump_reg_show_1, 0);
++		#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			static ssize_t sysfs_dump_reg_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
++		#else
++			static ssize_t sysfs_dump_reg_show_2( struct device *_dev,char *buf)
++		#endif
++		{
++			dump_reg_2();
++			return 0;
++		}
++		DEVICE_ATTR(dump_reg_2, S_IRUGO|S_IWUSR, sysfs_dump_reg_show_2, 0);
++	#else
++		static void dump_reg(void)
++		{
++			#ifdef __IS_HOST__
++				ifxusb_dump_registers(&ifxusb_hcd.core_if);
++			#endif
++			#ifdef __IS_DEVICE__
++				ifxusb_dump_registers(&ifxusb_pcd.core_if);
++			#endif
++		}
++		static ssize_t procfs_dump_reg_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++		{
++			dump_reg();
++			return 0;
++		}
++		#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			static ssize_t sysfs_dump_reg_show( struct device *_dev, struct device_attribute *attr,char *buf)
++		#else
++			static ssize_t sysfs_dump_reg_show( struct device *_dev,char *buf)
++		#endif
++		{
++			dump_reg();
++			return 0;
++		}
++		DEVICE_ATTR(dump_reg, S_IRUGO|S_IWUSR, sysfs_dump_reg_show, 0);
++	#endif
++
++
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++
++	#ifdef __IS_DUAL__
++		static void dump_spram_1(void)
++		{
++			ifxusb_dump_spram(&ifxusb_hcd_1.core_if);
++		}
++		static void dump_spram_2(void)
++		{
++			ifxusb_dump_spram(&ifxusb_hcd_2.core_if);
++		}
++
++		static ssize_t procfs_dump_spram_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++		{
++			dump_spram_1();
++			return 0;
++		}
++		static ssize_t procfs_dump_spram_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++		{
++			dump_spram_2();
++			return 0;
++		}
++		#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			static ssize_t sysfs_dump_spram_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
++		#else
++			static ssize_t sysfs_dump_spram_show_1( struct device *_dev,char *buf)
++		#endif
++		{
++			dump_spram_1();
++			return 0;
++		}
++		DEVICE_ATTR(dump_spram_1, S_IRUGO|S_IWUSR, sysfs_dump_spram_show_1, 0);
++
++		#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			static ssize_t sysfs_dump_spram_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
++		#else
++			static ssize_t sysfs_dump_spram_show_2( struct device *_dev,char *buf)
++		#endif
++		{
++			dump_spram_2();
++			return 0;
++		}
++		DEVICE_ATTR(dump_spram_2, S_IRUGO|S_IWUSR, sysfs_dump_spram_show_2, 0);
++	#else
++		static void dump_spram(void)
++		{
++			#ifdef __IS_HOST__
++				ifxusb_dump_spram(&ifxusb_hcd.core_if);
++			#endif
++			#ifdef __IS_DEVICE__
++				ifxusb_dump_spram(&ifxusb_pcd.core_if);
++			#endif
++		}
++		static ssize_t procfs_dump_spram_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++		{
++			dump_spram();
++			return 0;
++		}
++		#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			static ssize_t sysfs_dump_spram_show( struct device *_dev, struct device_attribute *attr,char *buf)
++		#else
++			static ssize_t sysfs_dump_spram_show( struct device *_dev,char *buf)
++		#endif
++		{
++			dump_spram();
++			return 0;
++		}
++		DEVICE_ATTR(dump_spram, S_IRUGO|S_IWUSR, sysfs_dump_spram_show, 0);
++	#endif
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++
++	#ifdef __IS_HOST__
++		#ifdef __IS_DUAL__
++			static ssize_t procfs_dump_host_state_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++			{
++				ifxhcd_dump_state(&ifxusb_hcd_1);
++				return 0;
++			}
++			static ssize_t procfs_dump_host_state_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++			{
++				ifxhcd_dump_state(&ifxusb_hcd_2);
++				return 0;
++			}
++			#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++				static ssize_t sysfs_dump_host_state_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
++			#else
++				static ssize_t sysfs_dump_host_state_show_1( struct device *_dev,char *buf)
++			#endif
++			{
++				ifxhcd_dump_state(&ifxusb_hcd_1);
++				return 0;
++			}
++			DEVICE_ATTR(dump_host_state_1, S_IRUGO|S_IWUSR, sysfs_dump_host_state_show_1, 0);
++			#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++				static ssize_t sysfs_dump_host_state_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
++			#else
++				static ssize_t sysfs_dump_host_state_show_2( struct device *_dev,char *buf)
++			#endif
++			{
++				ifxhcd_dump_state(&ifxusb_hcd_2);
++				return 0;
++			}
++			DEVICE_ATTR(dump_host_state_2, S_IRUGO|S_IWUSR, sysfs_dump_host_state_show_2, 0);
++		#else
++			static ssize_t procfs_dump_host_state_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++			{
++				ifxhcd_dump_state(&ifxusb_hcd);
++				return 0;
++			}
++			#if   LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++				static ssize_t sysfs_dump_host_state_show( struct device *_dev, struct device_attribute *attr,char *buf)
++			#else
++				static ssize_t sysfs_dump_host_state_show( struct device *_dev,char *buf)
++			#endif
++			{
++				ifxhcd_dump_state(&ifxusb_hcd);
++				return 0;
++			}
++			DEVICE_ATTR(dump_host_state, S_IRUGO|S_IWUSR, sysfs_dump_host_state_show, 0);
++		#endif
++
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++
++	#endif //IS_HOST_
++
++#endif //__ENABLE_DUMP__
++
++//////////////////////////////////////////////////////////////////////////////////
++
++static int  ifx_proc_addproc(char *funcname, read_proc_t *hookfuncr, write_proc_t *hookfuncw);
++static void ifx_proc_delproc(char *funcname);
++
++//////////////////////////////////////////////////////////////////////////////////
++
++/*!
++  \brief This function create the sysfs and procfs entries
++  \param[in] _dev Pointer of device structure, if applied
++ */
++void ifxusb_attr_create (void *_dev)
++{
++	int error;
++
++	struct device *dev = (struct device *) _dev;
++
++	IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++	error = ifx_proc_addproc("dbglevel", procfs_dbglevel_show, procfs_dbglevel_store);
++	error = device_create_file(dev, &dev_attr_dbglevel);
++
++	#ifdef __IS_DUAL__
++		error = ifx_proc_addproc("dump_params_1", procfs_dump_params_show_1, NULL);
++		error = ifx_proc_addproc("dump_params_2", procfs_dump_params_show_2, NULL);
++		error = device_create_file(dev, &dev_attr_dump_params_1);
++		error = device_create_file(dev, &dev_attr_dump_params_2);
++	#else
++		error = ifx_proc_addproc("dump_params", procfs_dump_params_show, NULL);
++		error = device_create_file(dev, &dev_attr_dump_params);
++	#endif
++
++	#ifdef __IS_DUAL__
++		error = ifx_proc_addproc("mode_1", procfs_mode_show_1, NULL);
++		error = ifx_proc_addproc("mode_2", procfs_mode_show_2, NULL);
++		error = device_create_file(dev, &dev_attr_mode_1);
++		error = device_create_file(dev, &dev_attr_mode_2);
++	#else
++		error = ifx_proc_addproc("mode", procfs_mode_show, NULL);
++		error = device_create_file(dev, &dev_attr_mode);
++	#endif
++
++	#ifdef __IS_HOST__
++		#ifdef __IS_DUAL__
++			error = ifx_proc_addproc("buspower_1", procfs_buspower_show_1, procfs_buspower_store_1);
++			error = ifx_proc_addproc("buspower_2", procfs_buspower_show_2, procfs_buspower_store_2);
++			error = device_create_file(dev, &dev_attr_buspower_1);
++			error = device_create_file(dev, &dev_attr_buspower_2);
++		#else
++			error = ifx_proc_addproc("buspower", procfs_buspower_show, procfs_buspower_store);
++			error = device_create_file(dev, &dev_attr_buspower);
++		#endif
++
++		#ifdef __IS_DUAL__
++			error = ifx_proc_addproc("bussuspend_1", procfs_bussuspend_show_1, NULL);
++			error = ifx_proc_addproc("bussuspend_2", procfs_bussuspend_show_2, NULL);
++			error = device_create_file(dev, &dev_attr_bussuspend_1);
++			error = device_create_file(dev, &dev_attr_bussuspend_2);
++		#else
++			error = ifx_proc_addproc("bussuspend", procfs_bussuspend_show, NULL);
++			error = device_create_file(dev, &dev_attr_bussuspend);
++		#endif
++
++		#ifdef __IS_DUAL__
++			error = ifx_proc_addproc("busconnected_1", procfs_busconnected_show_1, NULL);
++			error = ifx_proc_addproc("busconnected_2", procfs_busconnected_show_2, NULL);
++			error = device_create_file(dev, &dev_attr_busconnected_1);
++			error = device_create_file(dev, &dev_attr_busconnected_2);
++		#else
++			error = ifx_proc_addproc("busconnected", procfs_busconnected_show, NULL);
++			error = device_create_file(dev, &dev_attr_busconnected);
++		#endif
++
++		#ifdef __IS_DUAL__
++			error = ifx_proc_addproc("connectspeed_1", procfs_connectspeed_show_1, NULL);
++			error = ifx_proc_addproc("connectspeed_2", procfs_connectspeed_show_2, NULL);
++			error = device_create_file(dev, &dev_attr_connectspeed_1);
++			error = device_create_file(dev, &dev_attr_connectspeed_2);
++		#else
++			error = ifx_proc_addproc("connectspeed", procfs_connectspeed_show, NULL);
++			error = device_create_file(dev, &dev_attr_connectspeed);
++		#endif
++	#endif
++
++	#ifdef __IS_DEVICE__
++		error = ifx_proc_addproc("devspeed", procfs_devspeed_show, NULL);
++		error = device_create_file(dev, &dev_attr_devspeed);
++		error = ifx_proc_addproc("enumspeed", procfs_enumspeed_show, NULL);
++		error = device_create_file(dev, &dev_attr_enumspeed);
++	#endif
++
++	//////////////////////////////////////////////////////
++	#ifdef __ENABLE_DUMP__
++		#ifdef __IS_DUAL__
++			error = ifx_proc_addproc("dump_reg_1", procfs_dump_reg_show_1, NULL);
++			error = ifx_proc_addproc("dump_reg_2", procfs_dump_reg_show_2, NULL);
++			error = device_create_file(dev, &dev_attr_dump_reg_1);
++			error = device_create_file(dev, &dev_attr_dump_reg_2);
++		#else
++			error = ifx_proc_addproc("dump_reg", procfs_dump_reg_show, NULL);
++			error = device_create_file(dev, &dev_attr_dump_reg);
++		#endif
++
++		#ifdef __IS_DUAL__
++			error = ifx_proc_addproc("dump_spram_1", procfs_dump_spram_show_1, NULL);
++			error = ifx_proc_addproc("dump_spram_2", procfs_dump_spram_show_2, NULL);
++			error = device_create_file(dev, &dev_attr_dump_spram_1);
++			error = device_create_file(dev, &dev_attr_dump_spram_2);
++		#else
++			error = ifx_proc_addproc("dump_spram", procfs_dump_spram_show, NULL);
++			error = device_create_file(dev, &dev_attr_dump_spram);
++		#endif
++
++		#ifdef __IS_HOST__
++			#ifdef __IS_DUAL__
++				error = ifx_proc_addproc("dump_host_state_1", procfs_dump_host_state_show_1, NULL);
++				error = ifx_proc_addproc("dump_host_state_2", procfs_dump_host_state_show_2, NULL);
++				error = device_create_file(dev, &dev_attr_dump_host_state_1);
++				error = device_create_file(dev, &dev_attr_dump_host_state_2);
++			#else
++				error = ifx_proc_addproc("dump_host_state", procfs_dump_host_state_show, NULL);
++				error = device_create_file(dev, &dev_attr_dump_host_state);
++			#endif
++		#endif
++	#endif //__ENABLE_DUMP__
++	//////////////////////////////////////////////////////
++}
++
++
++/*!
++  \brief This function remove the sysfs and procfs entries
++  \param[in] _dev Pointer of device structure, if applied
++ */
++void ifxusb_attr_remove (void *_dev)
++{
++	struct device *dev = (struct device *) _dev;
++
++	IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++	ifx_proc_delproc("dbglevel");
++	device_remove_file(dev, &dev_attr_dbglevel);
++
++	#ifdef __IS_DUAL__
++		ifx_proc_delproc("dump_params_1");
++		ifx_proc_delproc("dump_params_2");
++		device_remove_file(dev, &dev_attr_dump_params_1);
++		device_remove_file(dev, &dev_attr_dump_params_2);
++	#else
++		ifx_proc_delproc("dump_params");
++		device_remove_file(dev, &dev_attr_dump_params);
++	#endif
++
++	#ifdef __IS_DUAL__
++		ifx_proc_delproc("mode_1");
++		ifx_proc_delproc("mode_2");
++		device_remove_file(dev, &dev_attr_mode_1);
++		device_remove_file(dev, &dev_attr_mode_2);
++	#else
++		ifx_proc_delproc("mode");
++		device_remove_file(dev, &dev_attr_mode);
++	#endif
++
++	#ifdef __IS_HOST__
++		#ifdef __IS_DUAL__
++			ifx_proc_delproc("buspower_1");
++			ifx_proc_delproc("buspower_2");
++			device_remove_file(dev, &dev_attr_buspower_1);
++			device_remove_file(dev, &dev_attr_buspower_2);
++		#else
++			ifx_proc_delproc("buspower");
++			device_remove_file(dev, &dev_attr_buspower);
++		#endif
++
++		#ifdef __IS_DUAL__
++			ifx_proc_delproc("bussuspend_1");
++			ifx_proc_delproc("bussuspend_2");
++			device_remove_file(dev, &dev_attr_bussuspend_1);
++			device_remove_file(dev, &dev_attr_bussuspend_2);
++		#else
++			ifx_proc_delproc("bussuspend");
++			device_remove_file(dev, &dev_attr_bussuspend);
++		#endif
++
++		#ifdef __IS_DUAL__
++			ifx_proc_delproc("busconnected_1");
++			ifx_proc_delproc("busconnected_2");
++			device_remove_file(dev, &dev_attr_busconnected_1);
++			device_remove_file(dev, &dev_attr_busconnected_2);
++		#else
++			ifx_proc_delproc("busconnected");
++			device_remove_file(dev, &dev_attr_busconnected);
++		#endif
++
++		#ifdef __IS_DUAL__
++			ifx_proc_delproc("connectspeed_1");
++			ifx_proc_delproc("connectspeed_2");
++			device_remove_file(dev, &dev_attr_connectspeed_1);
++			device_remove_file(dev, &dev_attr_connectspeed_2);
++		#else
++			ifx_proc_delproc("connectspeed");
++			device_remove_file(dev, &dev_attr_connectspeed);
++		#endif
++	#endif
++
++	#ifdef __IS_DEVICE__
++		ifx_proc_delproc("devspeed");
++		device_remove_file(dev, &dev_attr_devspeed);
++		ifx_proc_delproc("enumspeed");
++		device_remove_file(dev, &dev_attr_enumspeed);
++	#endif
++
++	#ifdef __ENABLE_DUMP__
++		#ifdef __IS_DUAL__
++			ifx_proc_delproc("dump_reg_1");
++			ifx_proc_delproc("dump_reg_2");
++			device_remove_file(dev, &dev_attr_dump_reg_1);
++			device_remove_file(dev, &dev_attr_dump_reg_2);
++		#else
++			ifx_proc_delproc("dump_reg");
++			device_remove_file(dev, &dev_attr_dump_reg);
++		#endif
++
++		#ifdef __IS_DUAL__
++			ifx_proc_delproc("dump_spram_1");
++			ifx_proc_delproc("dump_spram_2");
++			device_remove_file(dev, &dev_attr_dump_spram_1);
++			device_remove_file(dev, &dev_attr_dump_spram_2);
++		#else
++			ifx_proc_delproc("dump_spram");
++			device_remove_file(dev, &dev_attr_dump_spram);
++		#endif
++
++		#ifdef __IS_HOST__
++			#ifdef __IS_DUAL__
++				ifx_proc_delproc("dump_host_state_1");
++				ifx_proc_delproc("dump_host_state_2");
++				device_remove_file(dev, &dev_attr_dump_host_state_1);
++				device_remove_file(dev, &dev_attr_dump_host_state_2);
++			#else
++				ifx_proc_delproc("dump_host_state");
++				device_remove_file(dev, &dev_attr_dump_host_state);
++			#endif
++		#endif
++	#endif //__ENABLE_DUMP__
++	/* AVM/WK fix: del IFXUSB root dir*/
++	ifx_proc_delproc(NULL);
++}
++
++static struct proc_dir_entry * proc_ifx_root = NULL;
++
++/* initialize the proc file system and make a dir named /proc/[name] */
++static void ifx_proc_init(void)
++{
++	IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++	proc_ifx_root = proc_mkdir(ifxusb_driver_name, (void *)0);
++	if (!proc_ifx_root){
++		IFX_PRINT("%s proc initialization failed! \n", ifxusb_driver_name);
++		return;
++	}
++}
++
++/* proc file system add function for debugging. */
++static int ifx_proc_addproc(char *funcname, read_proc_t *hookfuncr, write_proc_t *hookfuncw)
++{
++	struct proc_dir_entry *pe;
++	IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++	if (!proc_ifx_root)
++		ifx_proc_init();
++
++	if (hookfuncw == NULL)
++	{
++		pe = create_proc_read_entry(funcname, S_IRUGO, proc_ifx_root, hookfuncr, NULL);
++		if (!pe)
++		{
++			IFX_PRINT("ERROR in creating read proc entry (%s)! \n", funcname);
++			return -1;
++		}
++	}
++	else
++	{
++		pe = create_proc_entry(funcname, S_IRUGO | S_IWUGO, proc_ifx_root);
++		if (pe)
++		{
++			pe->read_proc = hookfuncr;
++			pe->write_proc = hookfuncw;
++		}
++		else
++		{
++			IFX_PRINT("ERROR in creating proc entry (%s)! \n", funcname);
++			return -1;
++		}
++	}
++	return 0;
++}
++
++
++/* proc file system del function for removing module. */
++static void ifx_proc_delproc(char *funcname)
++{
++/* AVM/WK Fix*/
++	if (funcname != NULL) {
++		remove_proc_entry(funcname, proc_ifx_root);
++	} else {
++		remove_proc_entry(ifxusb_driver_name, NULL);
++		proc_ifx_root = NULL;
++	}
++}
++
++static void ifxusb_dump_params(ifxusb_core_if_t *_core_if)
++{
++	ifxusb_params_t *params=&_core_if->params;
++
++	#ifdef __IS_HOST__
++		IFX_PRINT("IFXUSB Dump Parameters ( Host Mode) \n");
++	#endif //__IS_HOST__
++	#ifdef __IS_DEVICE__
++		IFX_PRINT("IFXUSB Dump Parameters ( Device Mode) \n");
++	#endif //__IS_DEVICE__
++
++	#ifdef __DESC_DMA__
++		IFX_PRINT("DMA: Hermes DMA\n");
++	#else
++		IFX_PRINT("DMA: Non-Desc DMA\n");
++	#endif
++	IFX_PRINT("     Burst size: %d\n",params->dma_burst_size);
++
++	if     (params->speed==1)
++		IFX_PRINT("Full Speed only\n");
++	else if(params->speed==0)
++		IFX_PRINT("Full/Hign Speed\n");
++	else
++		IFX_PRINT("Unkonwn setting (%d) for Speed\n",params->speed);
++
++	IFX_PRINT("Total Data FIFO size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n",
++		params->data_fifo_size,params->data_fifo_size,
++		params->data_fifo_size*4, params->data_fifo_size*4
++	);
++
++	#ifdef __IS_DEVICE__
++		IFX_PRINT("Rx FIFO size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n",
++			params->rx_fifo_size,params->rx_fifo_size,
++			params->rx_fifo_size*4, params->rx_fifo_size*4
++		);
++		{
++			int i;
++			for(i=0;i<MAX_EPS_CHANNELS;i++)
++			{
++				IFX_PRINT("Tx FIFO #%d size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n",i,
++					params->tx_fifo_size[i],params->tx_fifo_size[i],
++					params->tx_fifo_size[i]*4, params->tx_fifo_size[i]*4
++				);
++			}
++		}
++		#ifdef __DED_FIFO__
++			IFX_PRINT("Treshold : %s Rx:%d Tx:%d \n",
++				(params->thr_ctl)?"On":"Off",params->tx_thr_length,params->rx_thr_length);
++		#endif
++	#else //__IS_HOST__
++		IFX_PRINT("Host Channels: %d\n",params->host_channels);
++
++		IFX_PRINT("Rx FIFO size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n",
++			params->data_fifo_size,params->data_fifo_size,
++			params->data_fifo_size*4, params->data_fifo_size*4
++		);
++
++		IFX_PRINT("NP Tx FIFO size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n",
++			params->nperio_tx_fifo_size,params->nperio_tx_fifo_size,
++			params->nperio_tx_fifo_size*4, params->nperio_tx_fifo_size*4
++		);
++
++		IFX_PRINT(" P Tx FIFO size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n",
++			params->perio_tx_fifo_size,params->perio_tx_fifo_size,
++			params->perio_tx_fifo_size*4, params->perio_tx_fifo_size*4
++		);
++	#endif //__IS_HOST__
++
++	IFX_PRINT("Max Transfer size: %d(0x%06X) Bytes\n",
++		params->max_transfer_size,params->max_transfer_size
++	);
++	IFX_PRINT("Max Packet Count: %d(0x%06X)\n",
++		params->max_packet_count,params->max_packet_count
++	);
++
++	IFX_PRINT("PHY UTMI Width: %d\n",params->phy_utmi_width);
++
++	IFX_PRINT("Turn Around Time: HS:%d FS:%d\n",params->turn_around_time_hs,params->turn_around_time_fs);
++	IFX_PRINT("Timeout Calibration: HS:%d FS:%d\n",params->timeout_cal_hs,params->timeout_cal_fs);
++
++
++	IFX_PRINT("==================================================\n");
++	IFX_PRINT("End of Parameters Dump\n");
++	IFX_PRINT("==================================================\n");
++}
++
++
+diff --git a/drivers/usb/ifxhcd/ifxusb_driver.c b/drivers/usb/ifxhcd/ifxusb_driver.c
+new file mode 100644
+index 0000000..2334905
+--- /dev/null
++++ b/drivers/usb/ifxhcd/ifxusb_driver.c
+@@ -0,0 +1,970 @@
++/*****************************************************************************
++ **   FILE NAME       : ifxusb_driver.c
++ **   PROJECT         : IFX USB sub-system V3
++ **   MODULES         : IFX USB sub-system Host and Device driver
++ **   SRC VERSION     : 1.0
++ **   DATE            : 1/Jan/2009
++ **   AUTHOR          : Chen, Howard
++ **   DESCRIPTION     : The provides the initialization and cleanup entry
++ **                     points for the IFX USB driver. This module can be
++ **                     dynamically loaded with insmod command or built-in
++ **                     with kernel. When loaded or executed the ifxusb_driver_init
++ **                     function is called. When the module is removed (using rmmod),
++ **                     the ifxusb_driver_cleanup function is called.
++ *****************************************************************************/
++
++/*!
++ \file ifxusb_driver.c
++ \brief This file contains the loading/unloading interface to the Linux driver.
++*/
++
++#include <linux/version.h>
++#include "ifxusb_version.h"
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++
++#include <linux/device.h>
++#include <linux/platform_device.h>
++
++#include <linux/errno.h>
++#include <linux/types.h>
++#include <linux/stat.h>  /* permission constants */
++#include <linux/gpio.h>
++#include <lantiq_soc.h>
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++	#include <linux/irq.h>
++#endif
++
++#include <asm/io.h>
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++	#include <asm/irq.h>
++#endif
++
++#include "ifxusb_plat.h"
++
++#include "ifxusb_cif.h"
++
++#ifdef __IS_HOST__
++	#include "ifxhcd.h"
++
++	#define    USB_DRIVER_DESC		"IFX USB HCD driver"
++	const char ifxusb_driver_name[]    = "ifxusb_hcd";
++
++	#ifdef __IS_DUAL__
++		ifxhcd_hcd_t ifxusb_hcd_1;
++		ifxhcd_hcd_t ifxusb_hcd_2;
++		const char ifxusb_hcd_name_1[] = "ifxusb_hcd_1";
++		const char ifxusb_hcd_name_2[] = "ifxusb_hcd_2";
++	#else
++		ifxhcd_hcd_t ifxusb_hcd;
++		const char ifxusb_hcd_name[]   = "ifxusb_hcd";
++	#endif
++
++	#if defined(__DO_OC_INT__)
++		static unsigned int  oc_int_installed=0;
++		static ifxhcd_hcd_t *oc_int_id=NULL;
++	#endif
++#endif
++
++#ifdef __IS_DEVICE__
++	#include "ifxpcd.h"
++
++	#define    USB_DRIVER_DESC		"IFX USB PCD driver"
++	const char ifxusb_driver_name[] = "ifxusb_pcd";
++
++	ifxpcd_pcd_t ifxusb_pcd;
++	const char ifxusb_pcd_name[]    = "ifxusb_pcd";
++#endif
++
++/* Global Debug Level Mask. */
++#ifdef __IS_HOST__
++	uint32_t h_dbg_lvl = 0x00;
++#endif
++
++#ifdef __IS_DEVICE__
++	uint32_t d_dbg_lvl = 0x00;
++#endif
++
++ifxusb_params_t ifxusb_module_params;
++
++static void parse_parms(void);
++
++
++#include <lantiq_irq.h>
++#define IFX_USB0_IR                     (INT_NUM_IM1_IRL0 + 22)
++#define IFX_USB1_IR                     (INT_NUM_IM2_IRL0 + 19)
++
++/*!
++   \brief This function is called when a driver is unregistered. This happens when
++  the rmmod command is executed. The device may or may not be electrically
++  present. If it is present, the driver stops device processing. Any resources
++  used on behalf of this device are freed.
++*/
++static int ifxusb_driver_remove(struct platform_device *_dev)
++{
++	IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++	#ifdef __IS_HOST__
++		#if defined(__DO_OC_INT__)
++			#if defined(__DO_OC_INT_ENABLE__)
++				ifxusb_oc_int_off();
++			#endif
++
++			if(oc_int_installed && oc_int_id)
++				free_irq((unsigned int)IFXUSB_OC_IRQ, oc_int_id );
++			oc_int_installed=0;
++			oc_int_id=NULL;
++		#endif
++
++		#if defined(__IS_DUAL__)
++			ifxhcd_remove(&ifxusb_hcd_1);
++			ifxusb_core_if_remove(&ifxusb_hcd_1.core_if );
++			ifxhcd_remove(&ifxusb_hcd_2);
++			ifxusb_core_if_remove(&ifxusb_hcd_2.core_if );
++		#else
++			ifxhcd_remove(&ifxusb_hcd);
++			ifxusb_core_if_remove(&ifxusb_hcd.core_if );
++		#endif
++	#endif
++
++	#ifdef __IS_DEVICE__
++		ifxpcd_remove();
++		ifxusb_core_if_remove(&ifxusb_pcd.core_if );
++	#endif
++
++	/* Remove the device attributes */
++
++	ifxusb_attr_remove(&_dev->dev);
++
++	return 0;
++}
++
++
++/* Function to setup the structures to control one usb core running as host*/
++#ifdef __IS_HOST__
++/*!
++   \brief inlined by ifxusb_driver_probe(), handling host mode probing. Run at each host core.
++*/
++	static inline int ifxusb_driver_probe_h(ifxhcd_hcd_t *_hcd,
++	                                        int           _irq,
++	                                        uint32_t      _iobase,
++	                                        uint32_t      _fifomem,
++	                                        uint32_t      _fifodbg
++	                                        )
++	{
++		int retval = 0;
++
++		IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++
++#ifdef __DEV_NEW__
++		ifxusb_power_off  (&_hcd->core_if);
++		ifxusb_phy_power_off  (&_hcd->core_if); // Test
++		mdelay(500);
++#endif //__DEV_NEW__
++		ifxusb_power_on  (&_hcd->core_if);
++		mdelay(50);
++		ifxusb_phy_power_on  (&_hcd->core_if); // Test
++		mdelay(50);
++		ifxusb_hard_reset(&_hcd->core_if);
++		retval =ifxusb_core_if_init(&_hcd->core_if,
++		                             _irq,
++		                             _iobase,
++		                             _fifomem,
++		                             _fifodbg);
++		if(retval)
++			return retval;
++
++		ifxusb_host_core_init(&_hcd->core_if,&ifxusb_module_params);
++
++		ifxusb_disable_global_interrupts( &_hcd->core_if);
++
++		/* The driver is now initialized and need to be registered into Linux USB sub-system */
++
++		retval = ifxhcd_init(_hcd); // hook the hcd into usb ss
++
++		if (retval != 0)
++		{
++			IFX_ERROR("_hcd_init failed\n");
++			return retval;
++		}
++
++		//ifxusb_enable_global_interrupts( _hcd->core_if ); // this should be done at hcd_start , including hcd_interrupt
++		return 0;
++	}
++#endif //__IS_HOST__
++
++#ifdef __IS_DEVICE__
++/*!
++  \brief inlined by ifxusb_driver_probe(), handling device mode probing.
++*/
++	static inline int ifxusb_driver_probe_d(ifxpcd_pcd_t *_pcd,
++	                                        int           _irq,
++	                                        uint32_t      _iobase,
++	                                        uint32_t      _fifomem,
++	                                        uint32_t      _fifodbg
++	                                        )
++	{
++		int retval = 0;
++
++		IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++#ifdef __DEV_NEW__
++		ifxusb_power_off  (&_pcd->core_if);
++		ifxusb_phy_power_off (&_pcd->core_if); // Test
++		mdelay(500);
++#endif // __DEV_NEW__
++		ifxusb_power_on  (&_pcd->core_if);
++		mdelay(50);
++		ifxusb_phy_power_on  (&_pcd->core_if); // Test
++		mdelay(50);
++		ifxusb_hard_reset(&_pcd->core_if);
++		retval =ifxusb_core_if_init(&_pcd->core_if,
++		                             _irq,
++		                             _iobase,
++		                             _fifomem,
++		                             _fifodbg);
++		if(retval)
++			return retval;
++
++		IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++		ifxusb_dev_core_init(&_pcd->core_if,&ifxusb_module_params);
++
++		IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++		ifxusb_disable_global_interrupts( &_pcd->core_if);
++
++		/* The driver is now initialized and need to be registered into
++		   Linux USB Gadget sub-system
++		 */
++		retval = ifxpcd_init();
++		IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++
++		if (retval != 0)
++		{
++			IFX_ERROR("_pcd_init failed\n");
++			return retval;
++		}
++		//ifxusb_enable_global_interrupts( _pcd->core_if );  // this should be done at gadget bind or start
++		return 0;
++	}
++#endif //__IS_DEVICE__
++
++
++
++/*!
++   \brief This function is called by module management in 2.6 kernel or by ifxusb_driver_init with 2.4 kernel
++  It is to probe and setup IFXUSB core(s).
++*/
++static int ifxusb_driver_probe(struct platform_device *_dev)
++{
++	int retval = 0;
++	int *pins = _dev->dev.platform_data;
++	if (ltq_is_vr9()) {
++		gpio_request(6, "id1");
++		gpio_request(9, "id2");
++		gpio_direction_input(6);
++		gpio_direction_input(9);
++	}
++	if (pins) {
++		if (pins[0]) {
++			gpio_request(pins[0], "vbus1");
++			gpio_direction_output(pins[0], 1);
++		}
++		if (pins[1] && ltq_is_vr9()) {
++			gpio_request(pins[1], "vbus2");
++			gpio_direction_output(pins[1], 1);
++		}
++	}
++	// Parsing and store the parameters
++	IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++	parse_parms();
++
++	#ifdef __IS_HOST__
++		#if   defined(__IS_DUAL__)
++			memset(&ifxusb_hcd_1, 0, sizeof(ifxhcd_hcd_t));
++			memset(&ifxusb_hcd_2, 0, sizeof(ifxhcd_hcd_t));
++
++			ifxusb_hcd_1.core_if.core_no=0;
++			ifxusb_hcd_2.core_if.core_no=1;
++			ifxusb_hcd_1.core_if.core_name=(char *)ifxusb_hcd_name_1;
++			ifxusb_hcd_2.core_if.core_name=(char *)ifxusb_hcd_name_2;
++
++			ifxusb_hcd_1.dev=&_dev->dev;
++			ifxusb_hcd_2.dev=&_dev->dev;
++
++			retval = ifxusb_driver_probe_h(&ifxusb_hcd_1,
++			                               IFX_USB0_IR,
++			                               IFXUSB1_IOMEM_BASE,
++			                               IFXUSB1_FIFOMEM_BASE,
++			                               IFXUSB1_FIFODBG_BASE
++			                               );
++			if(retval)
++				goto ifxusb_driver_probe_fail;
++
++			retval = ifxusb_driver_probe_h(&ifxusb_hcd_2,
++			                               IFX_USB1_IR,
++			                               IFXUSB2_IOMEM_BASE,
++			                               IFXUSB2_FIFOMEM_BASE,
++			                               IFXUSB2_FIFODBG_BASE
++			                              );
++			if(retval)
++				goto ifxusb_driver_probe_fail;
++
++		#elif defined(__IS_FIRST__)
++			memset(&ifxusb_hcd, 0, sizeof(ifxhcd_hcd_t));
++
++			ifxusb_hcd.core_if.core_no=0;
++			ifxusb_hcd.core_if.core_name=(char *)ifxusb_hcd_name;
++
++			ifxusb_hcd.dev=&_dev->dev;
++
++			retval = ifxusb_driver_probe_h(&ifxusb_hcd,
++			                               IFX_USB0_IR,
++			                               IFXUSB1_IOMEM_BASE,
++			                               IFXUSB1_FIFOMEM_BASE,
++			                               IFXUSB1_FIFODBG_BASE
++			                              );
++			if(retval)
++				goto ifxusb_driver_probe_fail;
++
++		#elif defined(__IS_SECOND__)
++			memset(&ifxusb_hcd, 0, sizeof(ifxhcd_hcd_t));
++
++			ifxusb_hcd.core_if.core_no=1;
++			ifxusb_hcd.core_if.core_name=(char *)ifxusb_hcd_name;
++
++			ifxusb_hcd.dev=&_dev->dev;
++
++			retval = ifxusb_driver_probe_h(&ifxusb_hcd,
++			                               IFX_USB1_IR,
++			                               IFXUSB2_IOMEM_BASE,
++			                               IFXUSB2_FIFOMEM_BASE,
++			                               IFXUSB2_FIFODBG_BASE
++			                              );
++			if(retval)
++				goto ifxusb_driver_probe_fail;
++
++		#else
++			memset(&ifxusb_hcd, 0, sizeof(ifxhcd_hcd_t));
++
++			ifxusb_hcd.core_if.core_no=0;
++			ifxusb_hcd.core_if.core_name=(char *)ifxusb_hcd_name;
++
++			ifxusb_hcd.dev=&_dev->dev;
++
++			retval = ifxusb_driver_probe_h(&ifxusb_hcd,
++			                               IFXUSB_IRQ,
++			                               IFXUSB_IOMEM_BASE,
++			                               IFXUSB_FIFOMEM_BASE,
++			                               IFXUSB_FIFODBG_BASE
++			                              );
++			if(retval)
++				goto ifxusb_driver_probe_fail;
++		#endif
++
++		#if defined(__DO_OC_INT__)
++			IFXUSB_DEBUGPL( DBG_CIL, "registering (overcurrent) handler for irq%d\n", IFXUSB_OC_IRQ);
++			#if   defined(__IS_DUAL__)
++				request_irq((unsigned int)IFXUSB_OC_IRQ, &ifx_hcd_oc_irq,
++//				  SA_INTERRUPT|SA_SHIRQ, "ifxusb_oc", (void *)&ifxusb_hcd_1);
++				  IRQF_DISABLED | IRQF_SHARED, "ifxusb_oc", (void *)&ifxusb_hcd_1);
++				oc_int_id=&ifxusb_hcd_1;
++			#else
++				request_irq((unsigned int)IFXUSB_OC_IRQ, &ifx_hcd_oc_irq,
++//				  SA_INTERRUPT|SA_SHIRQ, "ifxusb_oc", (void *)&ifxusb_hcd);
++				  IRQF_DISABLED | IRQF_SHARED, "ifxusb_oc", (void *)&ifxusb_hcd);
++				oc_int_id=&ifxusb_hcd;
++			#endif
++			oc_int_installed=1;
++
++			#if defined(__DO_OC_INT_ENABLE__)
++				ifxusb_oc_int_on();
++			#endif
++		#endif
++
++	#endif
++
++	#ifdef __IS_DEVICE__
++		memset(&ifxusb_pcd, 0, sizeof(ifxpcd_pcd_t));
++		ifxusb_pcd.core_if.core_name=(char *)&ifxusb_pcd_name[0];
++
++		ifxusb_pcd.dev=&_dev->dev;
++
++		#if   defined(__IS_FIRST__)
++			ifxusb_pcd.core_if.core_no=0;
++			retval = ifxusb_driver_probe_d(&ifxusb_pcd,
++			                               IFXUSB1_IRQ,
++			                               IFXUSB1_IOMEM_BASE,
++			                               IFXUSB1_FIFOMEM_BASE,
++			                               IFXUSB1_FIFODBG_BASE
++			                              );
++		#elif defined(__IS_SECOND__)
++			ifxusb_pcd.core_if.core_no=1;
++			retval = ifxusb_driver_probe_d(&ifxusb_pcd,
++			                               IFXUSB2_IRQ,
++			                               IFXUSB2_IOMEM_BASE,
++			                               IFXUSB2_FIFOMEM_BASE,
++			                               IFXUSB2_FIFODBG_BASE
++			                              );
++		#else
++			ifxusb_pcd.core_if.core_no=0;
++			retval = ifxusb_driver_probe_d(&ifxusb_pcd,
++			                               IFXUSB_IRQ,
++			                               IFXUSB_IOMEM_BASE,
++			                               IFXUSB_FIFOMEM_BASE,
++			                               IFXUSB_FIFODBG_BASE
++			                              );
++		#endif
++		if(retval)
++			goto ifxusb_driver_probe_fail;
++	#endif
++
++	ifxusb_attr_create(&_dev->dev);
++
++	return 0;
++
++ifxusb_driver_probe_fail:
++	ifxusb_driver_remove(_dev);
++	return retval;
++}
++
++
++
++/*!
++   \brief This function is called when the ifxusb_driver is installed with the insmod command.
++*/
++
++
++static struct platform_driver ifxusb_driver = {
++	.driver = {
++		.name		= ifxusb_driver_name,
++		.owner = THIS_MODULE,
++	},
++	.probe		= ifxusb_driver_probe,
++	.remove		= ifxusb_driver_remove,
++};
++
++int __init ifxusb_driver_init(void)
++{
++	int retval = 0;
++
++	IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++	IFX_PRINT("%s: version %s\n", ifxusb_driver_name, IFXUSB_VERSION);
++
++	retval = platform_driver_register(&ifxusb_driver);
++
++	if (retval < 0) {
++		IFX_ERROR("%s retval=%d\n", __func__, retval);
++		return retval;
++	}
++	return retval;
++}
++
++#if 0 // 2.4
++	int __init ifxusb_driver_init(void)
++	{
++		int retval = 0;
++		IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++		IFX_PRINT("%s: version %s\n", ifxusb_driver_name, IFXUSB_VERSION);
++		retval = ifxusb_driver_probe();
++
++		if (retval < 0) {
++			IFX_ERROR("%s retval=%d\n", __func__, retval);
++			return retval;
++		}
++
++		return retval;
++	}
++#endif
++
++module_init(ifxusb_driver_init);
++
++
++/*!
++   \brief This function is called when the driver is removed from the kernel
++  with the rmmod command. The driver unregisters itself with its bus
++  driver.
++*/
++
++void __exit ifxusb_driver_cleanup(void)
++{
++	IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++
++	platform_driver_unregister(&ifxusb_driver);
++
++	IFX_PRINT("%s module removed\n", ifxusb_driver_name);
++}
++#if 0
++	void __exit ifxusb_driver_cleanup(void)
++	{
++		IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++		ifxusb_driver_remove();
++		IFX_PRINT("%s module removed\n", ifxusb_driver_name);
++	}
++#endif
++module_exit(ifxusb_driver_cleanup);
++
++
++
++MODULE_DESCRIPTION(USB_DRIVER_DESC);
++MODULE_AUTHOR("Infineon");
++MODULE_LICENSE("GPL");
++
++
++
++// Parameters set when loaded
++//static long  dbg_lvl =0xFFFFFFFF;
++static long  dbg_lvl =0;
++static short dma_burst_size =-1;
++static short speed =-1;
++static long  data_fifo_size =-1;
++#ifdef __IS_DEVICE__
++	static long   rx_fifo_size =-1;
++	#ifdef __DED_FIFO__
++		static long  tx_fifo_size_00 =-1;
++		static long  tx_fifo_size_01 =-1;
++		static long  tx_fifo_size_02 =-1;
++		static long  tx_fifo_size_03 =-1;
++		static long  tx_fifo_size_04 =-1;
++		static long  tx_fifo_size_05 =-1;
++		static long  tx_fifo_size_06 =-1;
++		static long  tx_fifo_size_07 =-1;
++		static long  tx_fifo_size_08 =-1;
++		static long  tx_fifo_size_09 =-1;
++		static long  tx_fifo_size_10 =-1;
++		static long  tx_fifo_size_11 =-1;
++		static long  tx_fifo_size_12 =-1;
++		static long  tx_fifo_size_13 =-1;
++		static long  tx_fifo_size_14 =-1;
++		static long  tx_fifo_size_15 =-1;
++		static short thr_ctl=-1;
++		static long  tx_thr_length =-1;
++		static long  rx_thr_length =-1;
++	#else
++		static long   nperio_tx_fifo_size =-1;
++		static long   perio_tx_fifo_size_01 =-1;
++		static long   perio_tx_fifo_size_02 =-1;
++		static long   perio_tx_fifo_size_03 =-1;
++		static long   perio_tx_fifo_size_04 =-1;
++		static long   perio_tx_fifo_size_05 =-1;
++		static long   perio_tx_fifo_size_06 =-1;
++		static long   perio_tx_fifo_size_07 =-1;
++		static long   perio_tx_fifo_size_08 =-1;
++		static long   perio_tx_fifo_size_09 =-1;
++		static long   perio_tx_fifo_size_10 =-1;
++		static long   perio_tx_fifo_size_11 =-1;
++		static long   perio_tx_fifo_size_12 =-1;
++		static long   perio_tx_fifo_size_13 =-1;
++		static long   perio_tx_fifo_size_14 =-1;
++		static long   perio_tx_fifo_size_15 =-1;
++	#endif
++	static short   dev_endpoints =-1;
++#endif
++
++#ifdef __IS_HOST__
++	static long   rx_fifo_size =-1;
++	static long   nperio_tx_fifo_size =-1;
++	static long   perio_tx_fifo_size =-1;
++	static short  host_channels =-1;
++#endif
++
++static long   max_transfer_size =-1;
++static long   max_packet_count =-1;
++static long   phy_utmi_width =-1;
++static long   turn_around_time_hs =-1;
++static long   turn_around_time_fs =-1;
++static long   timeout_cal_hs =-1;
++static long   timeout_cal_fs =-1;
++
++/*!
++   \brief Parsing the parameters taken when module load
++*/
++static void parse_parms(void)
++{
++
++	IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++	#ifdef __IS_HOST__
++		h_dbg_lvl=dbg_lvl;
++	#endif
++	#ifdef __IS_DEVICE__
++		d_dbg_lvl=dbg_lvl;
++	#endif
++
++	switch(dma_burst_size)
++	{
++		case 0:
++		case 1:
++		case 4:
++		case 8:
++		case 16:
++			ifxusb_module_params.dma_burst_size=dma_burst_size;
++			break;
++		default:
++			ifxusb_module_params.dma_burst_size=default_param_dma_burst_size;
++	}
++
++	if(speed==0 || speed==1)
++		ifxusb_module_params.speed=speed;
++	else
++		ifxusb_module_params.speed=default_param_speed;
++
++	if(max_transfer_size>=2048 && max_transfer_size<=65535)
++		ifxusb_module_params.max_transfer_size=max_transfer_size;
++	else
++		ifxusb_module_params.max_transfer_size=default_param_max_transfer_size;
++
++	if(max_packet_count>=15 && max_packet_count<=511)
++		ifxusb_module_params.max_packet_count=max_packet_count;
++	else
++		ifxusb_module_params.max_packet_count=default_param_max_packet_count;
++
++	switch(phy_utmi_width)
++	{
++		case 8:
++		case 16:
++			ifxusb_module_params.phy_utmi_width=phy_utmi_width;
++			break;
++		default:
++			ifxusb_module_params.phy_utmi_width=default_param_phy_utmi_width;
++	}
++
++	if(turn_around_time_hs>=0 && turn_around_time_hs<=7)
++		ifxusb_module_params.turn_around_time_hs=turn_around_time_hs;
++	else
++		ifxusb_module_params.turn_around_time_hs=default_param_turn_around_time_hs;
++
++	if(turn_around_time_fs>=0 && turn_around_time_fs<=7)
++		ifxusb_module_params.turn_around_time_fs=turn_around_time_fs;
++	else
++		ifxusb_module_params.turn_around_time_fs=default_param_turn_around_time_fs;
++
++	if(timeout_cal_hs>=0 && timeout_cal_hs<=7)
++		ifxusb_module_params.timeout_cal_hs=timeout_cal_hs;
++	else
++		ifxusb_module_params.timeout_cal_hs=default_param_timeout_cal_hs;
++
++	if(timeout_cal_fs>=0 && timeout_cal_fs<=7)
++		ifxusb_module_params.timeout_cal_fs=timeout_cal_fs;
++	else
++		ifxusb_module_params.timeout_cal_fs=default_param_timeout_cal_fs;
++
++	if(data_fifo_size>=32 && data_fifo_size<=32768)
++		ifxusb_module_params.data_fifo_size=data_fifo_size;
++	else
++		ifxusb_module_params.data_fifo_size=default_param_data_fifo_size;
++
++	#ifdef __IS_HOST__
++		if(host_channels>=1 && host_channels<=16)
++			ifxusb_module_params.host_channels=host_channels;
++		else
++			ifxusb_module_params.host_channels=default_param_host_channels;
++
++		if(rx_fifo_size>=16 && rx_fifo_size<=32768)
++			ifxusb_module_params.rx_fifo_size=rx_fifo_size;
++		else
++			ifxusb_module_params.rx_fifo_size=default_param_rx_fifo_size;
++
++		if(nperio_tx_fifo_size>=16 && nperio_tx_fifo_size<=32768)
++			ifxusb_module_params.nperio_tx_fifo_size=nperio_tx_fifo_size;
++		else
++			ifxusb_module_params.nperio_tx_fifo_size=default_param_nperio_tx_fifo_size;
++
++		if(perio_tx_fifo_size>=16 && perio_tx_fifo_size<=32768)
++			ifxusb_module_params.perio_tx_fifo_size=perio_tx_fifo_size;
++		else
++			ifxusb_module_params.perio_tx_fifo_size=default_param_perio_tx_fifo_size;
++	#endif //__IS_HOST__
++
++	#ifdef __IS_DEVICE__
++		if(rx_fifo_size>=16 && rx_fifo_size<=32768)
++			ifxusb_module_params.rx_fifo_size=rx_fifo_size;
++		else
++			ifxusb_module_params.rx_fifo_size=default_param_rx_fifo_size;
++		#ifdef __DED_FIFO__
++			if(tx_fifo_size_00>=16 && tx_fifo_size_00<=32768)
++				ifxusb_module_params.tx_fifo_size[ 0]=tx_fifo_size_00;
++			else
++				ifxusb_module_params.tx_fifo_size[ 0]=default_param_tx_fifo_size_00;
++			if(tx_fifo_size_01>=0 && tx_fifo_size_01<=32768)
++				ifxusb_module_params.tx_fifo_size[ 1]=tx_fifo_size_01;
++			else
++				ifxusb_module_params.tx_fifo_size[ 1]=default_param_tx_fifo_size_01;
++			if(tx_fifo_size_02>=0 && tx_fifo_size_02<=32768)
++				ifxusb_module_params.tx_fifo_size[ 2]=tx_fifo_size_02;
++			else
++				ifxusb_module_params.tx_fifo_size[ 2]=default_param_tx_fifo_size_02;
++			if(tx_fifo_size_03>=0 && tx_fifo_size_03<=32768)
++				ifxusb_module_params.tx_fifo_size[ 3]=tx_fifo_size_03;
++			else
++				ifxusb_module_params.tx_fifo_size[ 3]=default_param_tx_fifo_size_03;
++			if(tx_fifo_size_04>=0 && tx_fifo_size_04<=32768)
++				ifxusb_module_params.tx_fifo_size[ 4]=tx_fifo_size_04;
++			else
++				ifxusb_module_params.tx_fifo_size[ 4]=default_param_tx_fifo_size_04;
++			if(tx_fifo_size_05>=0 && tx_fifo_size_05<=32768)
++				ifxusb_module_params.tx_fifo_size[ 5]=tx_fifo_size_05;
++			else
++				ifxusb_module_params.tx_fifo_size[ 5]=default_param_tx_fifo_size_05;
++			if(tx_fifo_size_06>=0 && tx_fifo_size_06<=32768)
++				ifxusb_module_params.tx_fifo_size[ 6]=tx_fifo_size_06;
++			else
++				ifxusb_module_params.tx_fifo_size[ 6]=default_param_tx_fifo_size_06;
++			if(tx_fifo_size_07>=0 && tx_fifo_size_07<=32768)
++				ifxusb_module_params.tx_fifo_size[ 7]=tx_fifo_size_07;
++			else
++				ifxusb_module_params.tx_fifo_size[ 7]=default_param_tx_fifo_size_07;
++			if(tx_fifo_size_08>=0 && tx_fifo_size_08<=32768)
++				ifxusb_module_params.tx_fifo_size[ 8]=tx_fifo_size_08;
++			else
++				ifxusb_module_params.tx_fifo_size[ 8]=default_param_tx_fifo_size_08;
++			if(tx_fifo_size_09>=0 && tx_fifo_size_09<=32768)
++				ifxusb_module_params.tx_fifo_size[ 9]=tx_fifo_size_09;
++			else
++				ifxusb_module_params.tx_fifo_size[ 9]=default_param_tx_fifo_size_09;
++			if(tx_fifo_size_10>=0 && tx_fifo_size_10<=32768)
++				ifxusb_module_params.tx_fifo_size[10]=tx_fifo_size_10;
++			else
++				ifxusb_module_params.tx_fifo_size[10]=default_param_tx_fifo_size_10;
++			if(tx_fifo_size_11>=0 && tx_fifo_size_11<=32768)
++				ifxusb_module_params.tx_fifo_size[11]=tx_fifo_size_11;
++			else
++				ifxusb_module_params.tx_fifo_size[11]=default_param_tx_fifo_size_11;
++			if(tx_fifo_size_12>=0 && tx_fifo_size_12<=32768)
++				ifxusb_module_params.tx_fifo_size[12]=tx_fifo_size_12;
++			else
++				ifxusb_module_params.tx_fifo_size[12]=default_param_tx_fifo_size_12;
++			if(tx_fifo_size_13>=0 && tx_fifo_size_13<=32768)
++				ifxusb_module_params.tx_fifo_size[13]=tx_fifo_size_13;
++			else
++				ifxusb_module_params.tx_fifo_size[13]=default_param_tx_fifo_size_13;
++			if(tx_fifo_size_14>=0 && tx_fifo_size_14<=32768)
++				ifxusb_module_params.tx_fifo_size[14]=tx_fifo_size_14;
++			else
++				ifxusb_module_params.tx_fifo_size[14]=default_param_tx_fifo_size_14;
++			if(tx_fifo_size_15>=0 && tx_fifo_size_15<=32768)
++				ifxusb_module_params.tx_fifo_size[15]=tx_fifo_size_15;
++			else
++				ifxusb_module_params.tx_fifo_size[15]=default_param_tx_fifo_size_15;
++			if(thr_ctl==0 || thr_ctl==1)
++				ifxusb_module_params.thr_ctl=thr_ctl;
++			else
++				ifxusb_module_params.thr_ctl=default_param_thr_ctl;
++			if(tx_thr_length>=16 && tx_thr_length<=511)
++				ifxusb_module_params.tx_thr_length=tx_thr_length;
++			else
++				ifxusb_module_params.tx_thr_length=default_param_tx_thr_length;
++			if(rx_thr_length>=16 && rx_thr_length<=511)
++				ifxusb_module_params.rx_thr_length=rx_thr_length;
++			else
++				ifxusb_module_params.rx_thr_length=default_param_rx_thr_length;
++		#else  //__DED_FIFO__
++			if(nperio_tx_fifo_size>=16 && nperio_tx_fifo_size<=32768)
++				ifxusb_module_params.tx_fifo_size[ 0]=nperio_tx_fifo_size;
++			else
++				ifxusb_module_params.tx_fifo_size[ 0]=default_param_nperio_tx_fifo_size;
++			if(perio_tx_fifo_size_01>=0 && perio_tx_fifo_size_01<=32768)
++				ifxusb_module_params.tx_fifo_size[ 1]=perio_tx_fifo_size_01;
++			else
++				ifxusb_module_params.tx_fifo_size[ 1]=default_param_perio_tx_fifo_size_01;
++			if(perio_tx_fifo_size_02>=0 && perio_tx_fifo_size_02<=32768)
++				ifxusb_module_params.tx_fifo_size[ 2]=perio_tx_fifo_size_02;
++			else
++				ifxusb_module_params.tx_fifo_size[ 2]=default_param_perio_tx_fifo_size_02;
++			if(perio_tx_fifo_size_03>=0 && perio_tx_fifo_size_03<=32768)
++				ifxusb_module_params.tx_fifo_size[ 3]=perio_tx_fifo_size_03;
++			else
++				ifxusb_module_params.tx_fifo_size[ 3]=default_param_perio_tx_fifo_size_03;
++			if(perio_tx_fifo_size_04>=0 && perio_tx_fifo_size_04<=32768)
++				ifxusb_module_params.tx_fifo_size[ 4]=perio_tx_fifo_size_04;
++			else
++				ifxusb_module_params.tx_fifo_size[ 4]=default_param_perio_tx_fifo_size_04;
++			if(perio_tx_fifo_size_05>=0 && perio_tx_fifo_size_05<=32768)
++				ifxusb_module_params.tx_fifo_size[ 5]=perio_tx_fifo_size_05;
++			else
++				ifxusb_module_params.tx_fifo_size[ 5]=default_param_perio_tx_fifo_size_05;
++			if(perio_tx_fifo_size_06>=0 && perio_tx_fifo_size_06<=32768)
++				ifxusb_module_params.tx_fifo_size[ 6]=perio_tx_fifo_size_06;
++			else
++				ifxusb_module_params.tx_fifo_size[ 6]=default_param_perio_tx_fifo_size_06;
++			if(perio_tx_fifo_size_07>=0 && perio_tx_fifo_size_07<=32768)
++				ifxusb_module_params.tx_fifo_size[ 7]=perio_tx_fifo_size_07;
++			else
++				ifxusb_module_params.tx_fifo_size[ 7]=default_param_perio_tx_fifo_size_07;
++			if(perio_tx_fifo_size_08>=0 && perio_tx_fifo_size_08<=32768)
++				ifxusb_module_params.tx_fifo_size[ 8]=perio_tx_fifo_size_08;
++			else
++				ifxusb_module_params.tx_fifo_size[ 8]=default_param_perio_tx_fifo_size_08;
++			if(perio_tx_fifo_size_09>=0 && perio_tx_fifo_size_09<=32768)
++				ifxusb_module_params.tx_fifo_size[ 9]=perio_tx_fifo_size_09;
++			else
++				ifxusb_module_params.tx_fifo_size[ 9]=default_param_perio_tx_fifo_size_09;
++			if(perio_tx_fifo_size_10>=0 && perio_tx_fifo_size_10<=32768)
++				ifxusb_module_params.tx_fifo_size[10]=perio_tx_fifo_size_10;
++			else
++				ifxusb_module_params.tx_fifo_size[10]=default_param_perio_tx_fifo_size_10;
++			if(perio_tx_fifo_size_11>=0 && perio_tx_fifo_size_11<=32768)
++				ifxusb_module_params.tx_fifo_size[11]=perio_tx_fifo_size_11;
++			else
++				ifxusb_module_params.tx_fifo_size[11]=default_param_perio_tx_fifo_size_11;
++			if(perio_tx_fifo_size_12>=0 && perio_tx_fifo_size_12<=32768)
++				ifxusb_module_params.tx_fifo_size[12]=perio_tx_fifo_size_12;
++			else
++				ifxusb_module_params.tx_fifo_size[12]=default_param_perio_tx_fifo_size_12;
++			if(perio_tx_fifo_size_13>=0 && perio_tx_fifo_size_13<=32768)
++				ifxusb_module_params.tx_fifo_size[13]=perio_tx_fifo_size_13;
++			else
++				ifxusb_module_params.tx_fifo_size[13]=default_param_perio_tx_fifo_size_13;
++			if(perio_tx_fifo_size_14>=0 && perio_tx_fifo_size_14<=32768)
++				ifxusb_module_params.tx_fifo_size[14]=perio_tx_fifo_size_14;
++			else
++				ifxusb_module_params.tx_fifo_size[14]=default_param_perio_tx_fifo_size_14;
++			if(perio_tx_fifo_size_15>=0 && perio_tx_fifo_size_15<=32768)
++				ifxusb_module_params.tx_fifo_size[15]=perio_tx_fifo_size_15;
++			else
++				ifxusb_module_params.tx_fifo_size[15]=default_param_perio_tx_fifo_size_15;
++		#endif //__DED_FIFO__
++	#endif //__IS_DEVICE__
++}
++
++
++
++
++
++
++
++module_param(dbg_lvl, long, 0444);
++MODULE_PARM_DESC(dbg_lvl, "Debug level.");
++
++module_param(dma_burst_size, short, 0444);
++MODULE_PARM_DESC(dma_burst_size, "DMA Burst Size 0, 1, 4, 8, 16");
++
++module_param(speed, short, 0444);
++MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed");
++
++module_param(data_fifo_size, long, 0444);
++MODULE_PARM_DESC(data_fifo_size, "Total number of words in the data FIFO memory 32-32768");
++
++#ifdef __IS_DEVICE__
++	module_param(rx_fifo_size, long, 0444);
++	MODULE_PARM_DESC(rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
++
++	#ifdef __DED_FIFO__
++		module_param(tx_fifo_size_00, long, 0444);
++		MODULE_PARM_DESC(tx_fifo_size_00, "Number of words in the Tx FIFO #00 16-32768");
++		module_param(tx_fifo_size_01, long, 0444);
++		MODULE_PARM_DESC(tx_fifo_size_01, "Number of words in the Tx FIFO #01  0-32768");
++		module_param(tx_fifo_size_02, long, 0444);
++		MODULE_PARM_DESC(tx_fifo_size_02, "Number of words in the Tx FIFO #02  0-32768");
++		module_param(tx_fifo_size_03, long, 0444);
++		MODULE_PARM_DESC(tx_fifo_size_03, "Number of words in the Tx FIFO #03  0-32768");
++		module_param(tx_fifo_size_04, long, 0444);
++		MODULE_PARM_DESC(tx_fifo_size_04, "Number of words in the Tx FIFO #04  0-32768");
++		module_param(tx_fifo_size_05, long, 0444);
++		MODULE_PARM_DESC(tx_fifo_size_05, "Number of words in the Tx FIFO #05  0-32768");
++		module_param(tx_fifo_size_06, long, 0444);
++		MODULE_PARM_DESC(tx_fifo_size_06, "Number of words in the Tx FIFO #06  0-32768");
++		module_param(tx_fifo_size_07, long, 0444);
++		MODULE_PARM_DESC(tx_fifo_size_07, "Number of words in the Tx FIFO #07  0-32768");
++		module_param(tx_fifo_size_08, long, 0444);
++		MODULE_PARM_DESC(tx_fifo_size_08, "Number of words in the Tx FIFO #08  0-32768");
++		module_param(tx_fifo_size_09, long, 0444);
++		MODULE_PARM_DESC(tx_fifo_size_09, "Number of words in the Tx FIFO #09  0-32768");
++		module_param(tx_fifo_size_10, long, 0444);
++		MODULE_PARM_DESC(tx_fifo_size_10, "Number of words in the Tx FIFO #10  0-32768");
++		module_param(tx_fifo_size_11, long, 0444);
++		MODULE_PARM_DESC(tx_fifo_size_11, "Number of words in the Tx FIFO #11  0-32768");
++		module_param(tx_fifo_size_12, long, 0444);
++		MODULE_PARM_DESC(tx_fifo_size_12, "Number of words in the Tx FIFO #12  0-32768");
++		module_param(tx_fifo_size_13, long, 0444);
++		MODULE_PARM_DESC(tx_fifo_size_13, "Number of words in the Tx FIFO #13  0-32768");
++		module_param(tx_fifo_size_14, long, 0444);
++		MODULE_PARM_DESC(tx_fifo_size_14, "Number of words in the Tx FIFO #14  0-32768");
++		module_param(tx_fifo_size_15, long, 0444);
++		MODULE_PARM_DESC(tx_fifo_size_15, "Number of words in the Tx FIFO #15  0-32768");
++
++		module_param(thr_ctl, short, 0444);
++		MODULE_PARM_DESC(thr_ctl, "0=Without 1=With Theshold Ctrl");
++
++		module_param(tx_thr_length, long, 0444);
++		MODULE_PARM_DESC(tx_thr_length, "TX Threshold length");
++
++		module_param(rx_thr_length, long, 0444);
++		MODULE_PARM_DESC(rx_thr_length, "RX Threshold length");
++
++	#else
++		module_param(nperio_tx_fifo_size, long, 0444);
++		MODULE_PARM_DESC(nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
++
++		module_param(perio_tx_fifo_size_01, long, 0444);
++		MODULE_PARM_DESC(perio_tx_fifo_size_01, "Number of words in the periodic Tx FIFO #01  0-32768");
++		module_param(perio_tx_fifo_size_02, long, 0444);
++		MODULE_PARM_DESC(perio_tx_fifo_size_02, "Number of words in the periodic Tx FIFO #02  0-32768");
++		module_param(perio_tx_fifo_size_03, long, 0444);
++		MODULE_PARM_DESC(perio_tx_fifo_size_03, "Number of words in the periodic Tx FIFO #03  0-32768");
++		module_param(perio_tx_fifo_size_04, long, 0444);
++		MODULE_PARM_DESC(perio_tx_fifo_size_04, "Number of words in the periodic Tx FIFO #04  0-32768");
++		module_param(perio_tx_fifo_size_05, long, 0444);
++		MODULE_PARM_DESC(perio_tx_fifo_size_05, "Number of words in the periodic Tx FIFO #05  0-32768");
++		module_param(perio_tx_fifo_size_06, long, 0444);
++		MODULE_PARM_DESC(perio_tx_fifo_size_06, "Number of words in the periodic Tx FIFO #06  0-32768");
++		module_param(perio_tx_fifo_size_07, long, 0444);
++		MODULE_PARM_DESC(perio_tx_fifo_size_07, "Number of words in the periodic Tx FIFO #07  0-32768");
++		module_param(perio_tx_fifo_size_08, long, 0444);
++		MODULE_PARM_DESC(perio_tx_fifo_size_08, "Number of words in the periodic Tx FIFO #08  0-32768");
++		module_param(perio_tx_fifo_size_09, long, 0444);
++		MODULE_PARM_DESC(perio_tx_fifo_size_09, "Number of words in the periodic Tx FIFO #09  0-32768");
++		module_param(perio_tx_fifo_size_10, long, 0444);
++		MODULE_PARM_DESC(perio_tx_fifo_size_10, "Number of words in the periodic Tx FIFO #10  0-32768");
++		module_param(perio_tx_fifo_size_11, long, 0444);
++		MODULE_PARM_DESC(perio_tx_fifo_size_11, "Number of words in the periodic Tx FIFO #11  0-32768");
++		module_param(perio_tx_fifo_size_12, long, 0444);
++		MODULE_PARM_DESC(perio_tx_fifo_size_12, "Number of words in the periodic Tx FIFO #12  0-32768");
++		module_param(perio_tx_fifo_size_13, long, 0444);
++		MODULE_PARM_DESC(perio_tx_fifo_size_13, "Number of words in the periodic Tx FIFO #13  0-32768");
++		module_param(perio_tx_fifo_size_14, long, 0444);
++		MODULE_PARM_DESC(perio_tx_fifo_size_14, "Number of words in the periodic Tx FIFO #14  0-32768");
++		module_param(perio_tx_fifo_size_15, long, 0444);
++		MODULE_PARM_DESC(perio_tx_fifo_size_15, "Number of words in the periodic Tx FIFO #15  0-32768");
++	#endif//__DED_FIFO__
++	module_param(dev_endpoints, short, 0444);
++	MODULE_PARM_DESC(dev_endpoints, "The number of endpoints in addition to EP0 available for device mode 1-15");
++#endif
++
++#ifdef __IS_HOST__
++	module_param(rx_fifo_size, long, 0444);
++	MODULE_PARM_DESC(rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
++
++	module_param(nperio_tx_fifo_size, long, 0444);
++	MODULE_PARM_DESC(nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
++
++	module_param(perio_tx_fifo_size, long, 0444);
++	MODULE_PARM_DESC(perio_tx_fifo_size, "Number of words in the host periodic Tx FIFO 16-32768");
++
++	module_param(host_channels, short, 0444);
++	MODULE_PARM_DESC(host_channels, "The number of host channel registers to use 1-16");
++#endif
++
++module_param(max_transfer_size, long, 0444);
++MODULE_PARM_DESC(max_transfer_size, "The maximum transfer size supported in bytes 2047-65535");
++
++module_param(max_packet_count, long, 0444);
++MODULE_PARM_DESC(max_packet_count, "The maximum number of packets in a transfer 15-511");
++
++module_param(phy_utmi_width, long, 0444);
++MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits");
++
++module_param(turn_around_time_hs, long, 0444);
++MODULE_PARM_DESC(turn_around_time_hs, "Turn-Around time for HS");
++
++module_param(turn_around_time_fs, long, 0444);
++MODULE_PARM_DESC(turn_around_time_fs, "Turn-Around time for FS");
++
++module_param(timeout_cal_hs, long, 0444);
++MODULE_PARM_DESC(timeout_cal_hs, "Timeout Cal for HS");
++
++module_param(timeout_cal_fs, long, 0444);
++MODULE_PARM_DESC(timeout_cal_fs, "Timeout Cal for FS");
++
++
+diff --git a/drivers/usb/ifxhcd/ifxusb_plat.h b/drivers/usb/ifxhcd/ifxusb_plat.h
+new file mode 100644
+index 0000000..a50294f
+--- /dev/null
++++ b/drivers/usb/ifxhcd/ifxusb_plat.h
+@@ -0,0 +1,1018 @@
++/*****************************************************************************
++ **   FILE NAME       : ifxusb_plat.h
++ **   PROJECT         : IFX USB sub-system V3
++ **   MODULES         : IFX USB sub-system Host and Device driver
++ **   SRC VERSION     : 1.0
++ **   DATE            : 1/Jan/2009
++ **   AUTHOR          : Chen, Howard
++ **   DESCRIPTION     : This file contains the Platform Specific constants, interfaces
++ **                     (functions and macros).
++ **   FUNCTIONS       :
++ **   COMPILER        : gcc
++ **   REFERENCE       : IFX hardware ref handbook for each plateforms
++ **   COPYRIGHT       :
++ **  Version Control Section  **
++ **   $Author$
++ **   $Date$
++ **   $Revisions$
++ **   $Log$       Revision history
++ *****************************************************************************/
++
++
++/*!
++  \defgroup IFXUSB_PLATEFORM_DEFINITION Platform Specific constants, interfaces (functions and macros).
++  \ingroup IFXUSB_DRIVER_V3
++  \brief Maintain plateform specific definitions and macros in this file.
++         Each plateform has its own definition zone.
++ */
++
++/*!
++  \defgroup IFXUSB_PLATEFORM_MEM_ADDR Definition of memory address and size and default parameters
++  \ingroup IFXUSB_PLATEFORM_DEFINITION
++ */
++
++/*!
++  \defgroup IFXUSB_DBG_ROUTINE Routines for debug message
++  \ingroup IFXUSB_PLATEFORM_DEFINITION
++ */
++
++
++/*! \file ifxusb_plat.h
++    \ingroup IFXUSB_DRIVER_V3
++    \brief This file contains the Platform Specific constants, interfaces (functions and macros).
++*/
++
++#if !defined(__IFXUSB_PLAT_H__)
++#define __IFXUSB_PLAT_H__
++
++
++#include <linux/types.h>
++#include <linux/slab.h>
++#include <linux/list.h>
++#include <linux/delay.h>
++#include <asm/io.h>
++
++
++#define IFXUSB_IOMEM_SIZE   0x00001000
++#define IFXUSB_FIFOMEM_SIZE 0x00010000
++#define IFXUSB_FIFODBG_SIZE 0x00020000
++
++
++
++/*!
++  \addtogroup IFXUSB_PLATEFORM_MEM_ADDR
++ */
++/*@{*/
++#if defined(__UEIP__)
++	#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++//		#define IFXUSB_IRQ          54
++		#define IFXUSB_IOMEM_BASE   0x1e101000
++		#define IFXUSB_FIFOMEM_BASE 0x1e120000
++		#define IFXUSB_FIFODBG_BASE 0x1e140000
++//		#define IFXUSB_OC_IRQ       151
++
++		#ifndef DANUBE_RCU_BASE_ADDR
++			#define DANUBE_RCU_BASE_ADDR            (0xBF203000)
++		#endif
++
++		#ifndef DANUBE_CGU
++			#define DANUBE_CGU                      (0xBF103000)
++		#endif
++		#ifndef DANUBE_CGU_IFCCR
++			#define DANUBE_CGU_IFCCR                ((volatile unsigned long *)(DANUBE_CGU+ 0x0018))
++		#endif
++		#ifndef DANUBE_PMU
++			#define DANUBE_PMU                      (KSEG1+0x1F102000)
++		#endif
++		#ifndef DANUBE_PMU_PWDCR
++			#define DANUBE_PMU_PWDCR                ((volatile unsigned long *)(DANUBE_PMU+0x001C))
++		#endif
++
++		#ifndef DANUBE_GPIO_P0_OUT
++			#define DANUBE_GPIO_P0_OUT                      (0xBF103000+0x10)
++			#define DANUBE_GPIO_P0_DIR                      (0xBF103000+0x18)
++			#define DANUBE_GPIO_P0_ALTSEL0                  (0xBF103000+0x1C)
++			#define DANUBE_GPIO_P0_ALTSEL1                  (0xBF103000+0x20)
++			#define DANUBE_GPIO_P0_OD                       (0xBF103000+0x24)
++			#define DANUBE_GPIO_P0_PUDSEL                   (0xBF103000+0x2C)
++			#define DANUBE_GPIO_P0_PUDEN                    (0xBF103000+0x30)
++			#define DANUBE_GPIO_P1_OUT                      (0xBF103000+0x40)
++			#define DANUBE_GPIO_P1_DIR                      (0xBF103000+0x48)
++			#define DANUBE_GPIO_P1_ALTSEL0                  (0xBF103000+0x4C)
++			#define DANUBE_GPIO_P1_ALTSEL1                  (0xBF103000+0x50)
++			#define DANUBE_GPIO_P1_OD                       (0xBF103000+0x54)
++			#define DANUBE_GPIO_P1_PUDSEL                   (0xBF103000+0x5C)
++			#define DANUBE_GPIO_P1_PUDEN                    (0xBF103000+0x60)
++		#endif
++
++		#define DANUBE_RCU_USBCFG  ((volatile unsigned long *)(DANUBE_RCU_BASE_ADDR + 0x18))
++		#define DANUBE_RCU_RESET   ((volatile unsigned long *)(DANUBE_RCU_BASE_ADDR + 0x10))
++		#define DANUBE_USBCFG_HDSEL_BIT    11	// 0:host, 1:device
++		#define DANUBE_USBCFG_HOST_END_BIT 10	// 0:little_end, 1:big_end
++		#define DANUBE_USBCFG_SLV_END_BIT  9	// 0:little_end, 1:big_end
++
++		#define default_param_dma_burst_size      4
++
++		#define default_param_speed               IFXUSB_PARAM_SPEED_HIGH
++
++		#define default_param_max_transfer_size   -1  //(Max, hwcfg)
++		#define default_param_max_packet_count    -1  //(Max, hwcfg)
++		#define default_param_phy_utmi_width      16
++
++		#define default_param_turn_around_time_hs 4
++		#define default_param_turn_around_time_fs 4
++		#define default_param_timeout_cal_hs      -1 //(NoChange)
++		#define default_param_timeout_cal_fs      -1 //(NoChange)
++
++		#define default_param_data_fifo_size      -1 //(Max, hwcfg)
++
++		#ifdef __IS_HOST__
++			#define default_param_host_channels       -1 //(Max, hwcfg)
++			#define default_param_rx_fifo_size        640
++			#define default_param_nperio_tx_fifo_size 640
++			#define default_param_perio_tx_fifo_size  768
++		#endif //__IS_HOST__
++
++		#ifdef __IS_DEVICE__
++			#ifdef __DED_INTR__
++				#define default_param_rx_fifo_size          1024
++				#define default_param_nperio_tx_fifo_size   1016
++				#define default_param_perio_tx_fifo_size_01 8
++			#else
++				#define default_param_rx_fifo_size          1024
++				#define default_param_nperio_tx_fifo_size   1024
++				#define default_param_perio_tx_fifo_size_01 0
++			#endif
++			#define default_param_perio_tx_fifo_size_02 0
++			#define default_param_perio_tx_fifo_size_03 0
++			#define default_param_perio_tx_fifo_size_04 0
++			#define default_param_perio_tx_fifo_size_05 0
++			#define default_param_perio_tx_fifo_size_06 0
++			#define default_param_perio_tx_fifo_size_07 0
++			#define default_param_perio_tx_fifo_size_08 0
++			#define default_param_perio_tx_fifo_size_09 0
++			#define default_param_perio_tx_fifo_size_10 0
++			#define default_param_perio_tx_fifo_size_11 0
++			#define default_param_perio_tx_fifo_size_12 0
++			#define default_param_perio_tx_fifo_size_13 0
++			#define default_param_perio_tx_fifo_size_14 0
++			#define default_param_perio_tx_fifo_size_15 0
++		#endif //__IS_DEVICE__
++
++	#elif defined(__IS_AMAZON_SE__)
++		//#include <asm/amazon_se/amazon_se.h>
++		//#include <asm/amazon_se/irq.h>
++
++//		#define IFXUSB_IRQ          31
++		#define IFXUSB_IOMEM_BASE   0x1e101000
++		#define IFXUSB_FIFOMEM_BASE 0x1e120000
++		#define IFXUSB_FIFODBG_BASE 0x1e140000
++//		#define IFXUSB_OC_IRQ       20
++
++		#ifndef AMAZON_SE_RCU_BASE_ADDR
++			#define AMAZON_SE_RCU_BASE_ADDR            (0xBF203000)
++		#endif
++		#define AMAZON_SE_RCU_USBCFG  ((volatile unsigned long *)(AMAZON_SE_RCU_BASE_ADDR + 0x18))
++		#define AMAZON_SE_RCU_RESET   ((volatile unsigned long *)(AMAZON_SE_RCU_BASE_ADDR + 0x10))
++		#define AMAZON_SE_USBCFG_HDSEL_BIT    11	// 0:host, 1:device
++		#define AMAZON_SE_USBCFG_HOST_END_BIT 10	// 0:little_end, 1:big_end
++		#define AMAZON_SE_USBCFG_SLV_END_BIT  9 	// 0:little_end, 1:big_end
++
++		#ifndef AMAZON_SE_GPIO_P0_OUT
++			#define AMAZON_SE_GPIO_P0_OUT                      (0xBF103000+0x10)
++			#define AMAZON_SE_GPIO_P0_DIR                      (0xBF103000+0x18)
++			#define AMAZON_SE_GPIO_P0_ALTSEL0                  (0xBF103000+0x1C)
++			#define AMAZON_SE_GPIO_P0_ALTSEL1                  (0xBF103000+0x20)
++			#define AMAZON_SE_GPIO_P0_OD                       (0xBF103000+0x24)
++			#define AMAZON_SE_GPIO_P0_PUDSEL                   (0xBF103000+0x2C)
++			#define AMAZON_SE_GPIO_P0_PUDEN                    (0xBF103000+0x30)
++			#define AMAZON_SE_GPIO_P1_OUT                      (0xBF103000+0x40)
++			#define AMAZON_SE_GPIO_P1_DIR                      (0xBF103000+0x48)
++			#define AMAZON_SE_GPIO_P1_ALTSEL0                  (0xBF103000+0x4C)
++			#define AMAZON_SE_GPIO_P1_ALTSEL1                  (0xBF103000+0x50)
++			#define AMAZON_SE_GPIO_P1_OD                       (0xBF103000+0x54)
++			#define AMAZON_SE_GPIO_P1_PUDSEL                   (0xBF103000+0x5C)
++			#define AMAZON_SE_GPIO_P1_PUDEN                    (0xBF103000+0x60)
++		#endif
++
++		#ifndef AMAZON_SE_CGU
++			#define AMAZON_SE_CGU                      (0xBF103000)
++		#endif
++		#ifndef AMAZON_SE_CGU_IFCCR
++			#define AMAZON_SE_CGU_IFCCR                ((volatile unsigned long *)(AMAZON_SE_CGU+ 0x0018))
++		#endif
++		#ifndef AMAZON_SE_PMU
++			#define AMAZON_SE_PMU                      (KSEG1+0x1F102000)
++		#endif
++		#ifndef AMAZON_SE_PMU_PWDCR
++			#define AMAZON_SE_PMU_PWDCR                ((volatile unsigned long *)(AMAZON_SE_PMU+0x001C))
++		#endif
++
++		#define default_param_dma_burst_size      4
++
++		#define default_param_speed               IFXUSB_PARAM_SPEED_HIGH
++
++		#define default_param_max_transfer_size   -1  //(Max, hwcfg)
++		#define default_param_max_packet_count    -1  //(Max, hwcfg)
++		#define default_param_phy_utmi_width      16
++
++		#define default_param_turn_around_time_hs 4 //(NoChange)
++		#define default_param_turn_around_time_fs 4 //(NoChange)
++		#define default_param_timeout_cal_hs      -1 //(NoChange)
++		#define default_param_timeout_cal_fs      -1 //(NoChange)
++
++		#define default_param_data_fifo_size      -1 //(Max, hwcfg)
++
++		#ifdef __IS_HOST__
++			#define default_param_host_channels       -1 //(Max, hwcfg)
++			#define default_param_rx_fifo_size        240
++			#define default_param_nperio_tx_fifo_size 240
++			#define default_param_perio_tx_fifo_size  32
++		#endif //__IS_HOST__
++		#ifdef __IS_DEVICE__
++			#ifdef __DED_INTR__
++				#define default_param_rx_fifo_size          256
++				#define default_param_nperio_tx_fifo_size   248
++				#define default_param_perio_tx_fifo_size_01 8
++			#else
++				#define default_param_rx_fifo_size          256
++				#define default_param_nperio_tx_fifo_size   256
++				#define default_param_perio_tx_fifo_size_01 0
++			#endif
++			#define default_param_perio_tx_fifo_size_02 0
++			#define default_param_perio_tx_fifo_size_03 0
++			#define default_param_perio_tx_fifo_size_04 0
++			#define default_param_perio_tx_fifo_size_05 0
++			#define default_param_perio_tx_fifo_size_06 0
++			#define default_param_perio_tx_fifo_size_07 0
++			#define default_param_perio_tx_fifo_size_08 0
++			#define default_param_perio_tx_fifo_size_09 0
++			#define default_param_perio_tx_fifo_size_10 0
++			#define default_param_perio_tx_fifo_size_11 0
++			#define default_param_perio_tx_fifo_size_12 0
++			#define default_param_perio_tx_fifo_size_13 0
++			#define default_param_perio_tx_fifo_size_14 0
++			#define default_param_perio_tx_fifo_size_15 0
++		#endif //__IS_DEVICE__
++
++	#elif defined(__IS_AR9__)
++//		#define IFXUSB1_IRQ 54
++		#define IFXUSB1_IOMEM_BASE   0x1E101000
++		#define IFXUSB1_FIFOMEM_BASE 0x1E120000
++		#define IFXUSB1_FIFODBG_BASE 0x1E140000
++
++//		#define IFXUSB2_IRQ 83
++		#define IFXUSB2_IOMEM_BASE   0x1E106000
++		#define IFXUSB2_FIFOMEM_BASE 0x1E1E0000
++		#define IFXUSB2_FIFODBG_BASE 0x1E1C0000
++
++//		#define IFXUSB_OC_IRQ 60
++
++		#ifndef AR9_RCU_BASE_ADDR
++			#define AR9_RCU_BASE_ADDR                (0xBF203000)
++		#endif
++
++		#ifndef AR9_CGU
++			#define AR9_CGU                          (0xBF103000)
++		#endif
++		#ifndef AR9_CGU_IFCCR
++			#define AR9_CGU_IFCCR                        ((volatile unsigned long *)(AR9_CGU+ 0x0018))
++		#endif
++
++		#ifndef AR9_PMU
++			#define AR9_PMU                              (KSEG1+0x1F102000)
++		#endif
++		#ifndef AR9_PMU_PWDCR
++			#define AR9_PMU_PWDCR                        ((volatile unsigned long *)(AR9_PMU+0x001C))
++		#endif
++
++		#ifndef AR9_GPIO_P0_OUT
++			#define AR9_GPIO_P0_OUT                      (0xBF103000+0x10)
++			#define AR9_GPIO_P0_DIR                      (0xBF103000+0x18)
++			#define AR9_GPIO_P0_ALTSEL0                  (0xBF103000+0x1C)
++			#define AR9_GPIO_P0_ALTSEL1                  (0xBF103000+0x20)
++			#define AR9_GPIO_P0_OD                       (0xBF103000+0x24)
++			#define AR9_GPIO_P0_PUDSEL                   (0xBF103000+0x2C)
++			#define AR9_GPIO_P0_PUDEN                    (0xBF103000+0x30)
++			#define AR9_GPIO_P1_OUT                      (0xBF103000+0x40)
++			#define AR9_GPIO_P1_DIR                      (0xBF103000+0x48)
++			#define AR9_GPIO_P1_ALTSEL0                  (0xBF103000+0x4C)
++			#define AR9_GPIO_P1_ALTSEL1                  (0xBF103000+0x50)
++			#define AR9_GPIO_P1_OD                       (0xBF103000+0x54)
++			#define AR9_GPIO_P1_PUDSEL                   (0xBF103000+0x5C)
++			#define AR9_GPIO_P1_PUDEN                    (0xBF103000+0x60)
++		#endif
++
++		#define AR9_RCU_USB1CFG  ((volatile unsigned long *)(AR9_RCU_BASE_ADDR + 0x18))
++		#define AR9_RCU_USB2CFG  ((volatile unsigned long *)(AR9_RCU_BASE_ADDR + 0x34))
++		#define AR9_RCU_USBRESET ((volatile unsigned long *)(AR9_RCU_BASE_ADDR + 0x10))
++		#define AR9_USBCFG_ARB          7	//
++		#define AR9_USBCFG_HDSEL_BIT    11	// 0:host, 1:device
++		#define AR9_USBCFG_HOST_END_BIT 10	// 0:little_end, 1:big_end
++		#define AR9_USBCFG_SLV_END_BIT  17	// 0:little_end, 1:big_end
++
++		#define default_param_dma_burst_size      4
++
++		#define default_param_speed               IFXUSB_PARAM_SPEED_HIGH
++
++		#define default_param_max_transfer_size   -1  //(Max, hwcfg)
++		#define default_param_max_packet_count    -1  //(Max, hwcfg)
++		#define default_param_phy_utmi_width      16
++
++		#define default_param_turn_around_time_hs 4 //(NoChange)
++		#define default_param_turn_around_time_fs 4 //(NoChange)
++		#define default_param_timeout_cal_hs      -1 //(NoChange)
++		#define default_param_timeout_cal_fs      -1 //(NoChange)
++
++		#define default_param_data_fifo_size      -1 //(Max, hwcfg)
++
++		#ifdef __IS_HOST__
++			#define default_param_host_channels       -1 //(Max, hwcfg)
++			#define default_param_rx_fifo_size        240
++			#define default_param_nperio_tx_fifo_size 240
++			#define default_param_perio_tx_fifo_size  32
++		#endif //__IS_HOST__
++		#ifdef __IS_DEVICE__
++			#ifdef __DED_INTR__
++				#define default_param_rx_fifo_size          256
++//				#define default_param_nperio_tx_fifo_size   248
++//				#define default_param_perio_tx_fifo_size_01 8
++				#define default_param_nperio_tx_fifo_size   252
++				#define default_param_perio_tx_fifo_size_01 4
++			#else
++				#define default_param_rx_fifo_size          256
++				#define default_param_nperio_tx_fifo_size   256
++				#define default_param_perio_tx_fifo_size_01 0
++			#endif
++			#define default_param_perio_tx_fifo_size_02 0
++			#define default_param_perio_tx_fifo_size_03 0
++			#define default_param_perio_tx_fifo_size_04 0
++			#define default_param_perio_tx_fifo_size_05 0
++			#define default_param_perio_tx_fifo_size_06 0
++			#define default_param_perio_tx_fifo_size_07 0
++			#define default_param_perio_tx_fifo_size_08 0
++			#define default_param_perio_tx_fifo_size_09 0
++			#define default_param_perio_tx_fifo_size_10 0
++			#define default_param_perio_tx_fifo_size_11 0
++			#define default_param_perio_tx_fifo_size_12 0
++			#define default_param_perio_tx_fifo_size_13 0
++			#define default_param_perio_tx_fifo_size_14 0
++			#define default_param_perio_tx_fifo_size_15 0
++		#endif //__IS_DEVICE__
++
++	#elif defined(__IS_VR9__)
++//		#define IFXUSB1_IRQ 54
++		#define IFXUSB1_IOMEM_BASE   0x1E101000
++		#define IFXUSB1_FIFOMEM_BASE 0x1E120000
++		#define IFXUSB1_FIFODBG_BASE 0x1E140000
++
++//		#define IFXUSB2_IRQ 83
++		#define IFXUSB2_IOMEM_BASE   0x1E106000
++		#define IFXUSB2_FIFOMEM_BASE 0x1E1E0000
++		#define IFXUSB2_FIFODBG_BASE 0x1E1C0000
++//		#define IFXUSB_OC_IRQ 60
++
++		#ifndef VR9_RCU_BASE_ADDR
++			#define VR9_RCU_BASE_ADDR            (0xBF203000)
++		#endif
++
++		#ifndef VR9_CGU
++			#define VR9_CGU                          (0xBF103000)
++		#endif
++		#ifndef VR9_CGU_IFCCR
++			#define VR9_CGU_IFCCR                        ((volatile unsigned long *)(VR9_CGU+ 0x0018))
++		#endif
++
++		#ifndef VR9_PMU
++			#define VR9_PMU                              (KSEG1+0x1F102000)
++		#endif
++		#ifndef VR9_PMU_PWDCR
++			#define VR9_PMU_PWDCR                        ((volatile unsigned long *)(VR9_PMU+0x001C))
++		#endif
++
++		#ifndef VR9_GPIO_P0_OUT
++			#define VR9_GPIO_P0_OUT                      (0xBF103000+0x10)
++			#define VR9_GPIO_P0_DIR                      (0xBF103000+0x18)
++			#define VR9_GPIO_P0_ALTSEL0                  (0xBF103000+0x1C)
++			#define VR9_GPIO_P0_ALTSEL1                  (0xBF103000+0x20)
++			#define VR9_GPIO_P0_OD                       (0xBF103000+0x24)
++			#define VR9_GPIO_P0_PUDSEL                   (0xBF103000+0x2C)
++			#define VR9_GPIO_P0_PUDEN                    (0xBF103000+0x30)
++			#define VR9_GPIO_P1_OUT                      (0xBF103000+0x40)
++			#define VR9_GPIO_P1_DIR                      (0xBF103000+0x48)
++			#define VR9_GPIO_P1_ALTSEL0                  (0xBF103000+0x4C)
++			#define VR9_GPIO_P1_ALTSEL1                  (0xBF103000+0x50)
++			#define VR9_GPIO_P1_OD                       (0xBF103000+0x54)
++			#define VR9_GPIO_P1_PUDSEL                   (0xBF103000+0x5C)
++			#define VR9_GPIO_P1_PUDEN                    (0xBF103000+0x60)
++		#endif
++
++		#define VR9_RCU_USB1CFG   ((volatile unsigned long *)(VR9_RCU_BASE_ADDR + 0x18))
++		#define VR9_RCU_USB2CFG   ((volatile unsigned long *)(VR9_RCU_BASE_ADDR + 0x34))
++		#define VR9_RCU_USB_ANA_CFG1A  ((volatile unsigned long *)(AR9_RCU_BASE_ADDR + 0x38))
++		#define VR9_RCU_USB_ANA_CFG1B  ((volatile unsigned long *)(AR9_RCU_BASE_ADDR + 0x3C))
++		#define VR9_RCU_USBRESET  ((volatile unsigned long *)(VR9_RCU_BASE_ADDR + 0x10))
++		#define VR9_RCU_USBRESET2 ((volatile unsigned long *)(VR9_RCU_BASE_ADDR + 0x48))
++		#define VR9_USBCFG_ARB          7	//
++		#define VR9_USBCFG_HDSEL_BIT    11	// 0:host, 1:device
++		#define VR9_USBCFG_HOST_END_BIT 10	// 0:little_end, 1:big_end
++		#define VR9_USBCFG_SLV_END_BIT  9	// 0:little_end, 1:big_end
++
++		/*== AVM/BC 20101220 Workaround VR9 DMA burst size ==
++ 		 * Using 2 Devices in diferent ports cause a general USB Host Error.
++ 		 * Workaround found in UGW4.3
++ 		 */
++//		#define default_param_dma_burst_size 4      //(ALL)
++		//WA for AHB
++		#define default_param_dma_burst_size 0      //(ALL)
++
++		#define default_param_speed               IFXUSB_PARAM_SPEED_HIGH
++
++		#define default_param_max_transfer_size -1  //(Max, hwcfg)
++		#define default_param_max_packet_count  -1  //(Max, hwcfg)
++		#define default_param_phy_utmi_width    16
++
++		#define default_param_turn_around_time_hs 6 //(NoChange) snpsid >= 0x4f54260a
++		#define default_param_turn_around_time_fs 6 //(NoChange) snpsid >= 0x4f54260a
++		#define default_param_timeout_cal_hs      -1 //(NoChange)
++		#define default_param_timeout_cal_fs      -1 //(NoChange)
++
++		#define default_param_data_fifo_size      -1 //(Max, hwcfg)
++
++		#ifdef __IS_HOST__
++			#define default_param_host_channels       -1 //(Max, hwcfg)
++			#define default_param_rx_fifo_size        240
++			#define default_param_nperio_tx_fifo_size 240
++			#define default_param_perio_tx_fifo_size  32
++		#endif //__IS_HOST__
++		#ifdef __IS_DEVICE__
++#if 0
++			#define default_param_rx_fifo_size    256
++			#define default_param_tx_fifo_size_00 -1
++			#define default_param_tx_fifo_size_01 -1
++			#define default_param_tx_fifo_size_02 -1
++#else
++			#define default_param_rx_fifo_size    256
++			#define default_param_tx_fifo_size_00 32
++			#define default_param_tx_fifo_size_01 200
++			#define default_param_tx_fifo_size_02 8
++#endif
++			#define default_param_tx_fifo_size_03 -1
++			#define default_param_tx_fifo_size_04 -1
++			#define default_param_tx_fifo_size_05 -1
++			#define default_param_tx_fifo_size_06 -1
++			#define default_param_tx_fifo_size_07 -1
++			#define default_param_tx_fifo_size_08 -1
++			#define default_param_tx_fifo_size_09 -1
++			#define default_param_tx_fifo_size_10 -1
++			#define default_param_tx_fifo_size_11 -1
++			#define default_param_tx_fifo_size_12 -1
++			#define default_param_tx_fifo_size_13 -1
++			#define default_param_tx_fifo_size_14 -1
++			#define default_param_tx_fifo_size_15 -1
++			#define default_param_dma_unalgned_tx -1
++			#define default_param_dma_unalgned_rx -1
++			#define default_param_thr_ctl         -1
++			#define default_param_tx_thr_length   -1
++			#define default_param_rx_thr_length   -1
++		#endif //__IS_DEVICE__
++	#else // __IS_VR9__
++		#error "Please choose one platform!!"
++	#endif // __IS_VR9__
++
++#else //UEIP
++	#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++//		#define IFXUSB_IRQ          54
++		#define IFXUSB_IOMEM_BASE   0x1e101000
++		#define IFXUSB_FIFOMEM_BASE 0x1e120000
++		#define IFXUSB_FIFODBG_BASE 0x1e140000
++//		#define IFXUSB_OC_IRQ       151
++
++
++		#ifndef DANUBE_RCU_BASE_ADDR
++			#define DANUBE_RCU_BASE_ADDR            (0xBF203000)
++		#endif
++
++		#ifndef DANUBE_CGU
++			#define DANUBE_CGU                      (0xBF103000)
++		#endif
++		#ifndef DANUBE_CGU_IFCCR
++			#define DANUBE_CGU_IFCCR                ((volatile unsigned long *)(DANUBE_CGU+ 0x0018))
++		#endif
++		#ifndef DANUBE_PMU
++			#define DANUBE_PMU                      (KSEG1+0x1F102000)
++		#endif
++		#ifndef DANUBE_PMU_PWDCR
++			#define DANUBE_PMU_PWDCR                ((volatile unsigned long *)(DANUBE_PMU+0x001C))
++		#endif
++
++		#ifndef DANUBE_GPIO_P0_OUT
++			#define DANUBE_GPIO_P0_OUT                      (0xBF103000+0x10)
++			#define DANUBE_GPIO_P0_DIR                      (0xBF103000+0x18)
++			#define DANUBE_GPIO_P0_ALTSEL0                  (0xBF103000+0x1C)
++			#define DANUBE_GPIO_P0_ALTSEL1                  (0xBF103000+0x20)
++			#define DANUBE_GPIO_P0_OD                       (0xBF103000+0x24)
++			#define DANUBE_GPIO_P0_PUDSEL                   (0xBF103000+0x2C)
++			#define DANUBE_GPIO_P0_PUDEN                    (0xBF103000+0x30)
++			#define DANUBE_GPIO_P1_OUT                      (0xBF103000+0x40)
++			#define DANUBE_GPIO_P1_DIR                      (0xBF103000+0x48)
++			#define DANUBE_GPIO_P1_ALTSEL0                  (0xBF103000+0x4C)
++			#define DANUBE_GPIO_P1_ALTSEL1                  (0xBF103000+0x50)
++			#define DANUBE_GPIO_P1_OD                       (0xBF103000+0x54)
++			#define DANUBE_GPIO_P1_PUDSEL                   (0xBF103000+0x5C)
++			#define DANUBE_GPIO_P1_PUDEN                    (0xBF103000+0x60)
++		#endif
++
++
++		#define DANUBE_RCU_USBCFG  ((volatile unsigned long *)(DANUBE_RCU_BASE_ADDR + 0x18))
++		#define DANUBE_RCU_RESET   ((volatile unsigned long *)(DANUBE_RCU_BASE_ADDR + 0x10))
++		#define DANUBE_USBCFG_HDSEL_BIT    11	// 0:host, 1:device
++		#define DANUBE_USBCFG_HOST_END_BIT 10	// 0:little_end, 1:big_end
++		#define DANUBE_USBCFG_SLV_END_BIT  9	// 0:little_end, 1:big_end
++
++		#define default_param_dma_burst_size      4
++
++		#define default_param_speed               IFXUSB_PARAM_SPEED_HIGH
++
++		#define default_param_max_transfer_size   -1  //(Max, hwcfg)
++		#define default_param_max_packet_count    -1  //(Max, hwcfg)
++		#define default_param_phy_utmi_width      16
++
++		#define default_param_turn_around_time_hs 4 //(NoChange)
++		#define default_param_turn_around_time_fs 4 //(NoChange)
++		#define default_param_timeout_cal_hs      -1 //(NoChange)
++		#define default_param_timeout_cal_fs      -1 //(NoChange)
++
++		#define default_param_data_fifo_size      -1 //(Max, hwcfg)
++		#ifdef __IS_HOST__
++			#define default_param_host_channels       -1 //(Max, hwcfg)
++			#define default_param_rx_fifo_size        640
++			#define default_param_nperio_tx_fifo_size 640
++			#define default_param_perio_tx_fifo_size  768
++		#endif //__IS_HOST__
++
++		#ifdef __IS_DEVICE__
++			#ifdef __DED_INTR__
++				#define default_param_rx_fifo_size          1024
++				#define default_param_nperio_tx_fifo_size   1016
++				#define default_param_perio_tx_fifo_size_01 8
++			#else
++				#define default_param_rx_fifo_size          1024
++				#define default_param_nperio_tx_fifo_size   1024
++				#define default_param_perio_tx_fifo_size_01 0
++			#endif
++			#define default_param_perio_tx_fifo_size_02 0
++			#define default_param_perio_tx_fifo_size_03 0
++			#define default_param_perio_tx_fifo_size_04 0
++			#define default_param_perio_tx_fifo_size_05 0
++			#define default_param_perio_tx_fifo_size_06 0
++			#define default_param_perio_tx_fifo_size_07 0
++			#define default_param_perio_tx_fifo_size_08 0
++			#define default_param_perio_tx_fifo_size_09 0
++			#define default_param_perio_tx_fifo_size_10 0
++			#define default_param_perio_tx_fifo_size_11 0
++			#define default_param_perio_tx_fifo_size_12 0
++			#define default_param_perio_tx_fifo_size_13 0
++			#define default_param_perio_tx_fifo_size_14 0
++			#define default_param_perio_tx_fifo_size_15 0
++		#endif //__IS_DEVICE__
++
++	#elif defined(__IS_AMAZON_SE__)
++		#include <asm/amazon_se/amazon_se.h>
++		//#include <asm/amazon_se/irq.h>
++
++//		#define IFXUSB_IRQ          31
++		#define IFXUSB_IOMEM_BASE   0x1e101000
++		#define IFXUSB_FIFOMEM_BASE 0x1e120000
++		#define IFXUSB_FIFODBG_BASE 0x1e140000
++//		#define IFXUSB_OC_IRQ       20
++
++		#define AMAZON_SE_RCU_USBCFG  ((volatile unsigned long *)(AMAZON_SE_RCU_BASE_ADDR + 0x18))
++		#define AMAZON_SE_RCU_RESET   ((volatile unsigned long *)(AMAZON_SE_RCU_BASE_ADDR + 0x10))
++		#define AMAZON_SE_USBCFG_HDSEL_BIT    11	// 0:host, 1:device
++		#define AMAZON_SE_USBCFG_HOST_END_BIT 10	// 0:little_end, 1:big_end
++		#define AMAZON_SE_USBCFG_SLV_END_BIT  9 	// 0:little_end, 1:big_end
++
++		#ifndef AMAZON_SE_GPIO_P0_OUT
++			#define AMAZON_SE_GPIO_P0_OUT                      (0xBF103000+0x10)
++			#define AMAZON_SE_GPIO_P0_DIR                      (0xBF103000+0x18)
++			#define AMAZON_SE_GPIO_P0_ALTSEL0                  (0xBF103000+0x1C)
++			#define AMAZON_SE_GPIO_P0_ALTSEL1                  (0xBF103000+0x20)
++			#define AMAZON_SE_GPIO_P0_OD                       (0xBF103000+0x24)
++			#define AMAZON_SE_GPIO_P0_PUDSEL                   (0xBF103000+0x2C)
++			#define AMAZON_SE_GPIO_P0_PUDEN                    (0xBF103000+0x30)
++			#define AMAZON_SE_GPIO_P1_OUT                      (0xBF103000+0x40)
++			#define AMAZON_SE_GPIO_P1_DIR                      (0xBF103000+0x48)
++			#define AMAZON_SE_GPIO_P1_ALTSEL0                  (0xBF103000+0x4C)
++			#define AMAZON_SE_GPIO_P1_ALTSEL1                  (0xBF103000+0x50)
++			#define AMAZON_SE_GPIO_P1_OD                       (0xBF103000+0x54)
++			#define AMAZON_SE_GPIO_P1_PUDSEL                   (0xBF103000+0x5C)
++			#define AMAZON_SE_GPIO_P1_PUDEN                    (0xBF103000+0x60)
++		#endif
++
++
++		#ifndef AMAZON_SE_CGU
++			#define AMAZON_SE_CGU                      (0xBF103000)
++		#endif
++		#ifndef AMAZON_SE_CGU_IFCCR
++			#define AMAZON_SE_CGU_IFCCR                ((volatile unsigned long *)(AMAZON_SE_CGU+ 0x0018))
++		#endif
++		#ifndef AMAZON_SE_PMU
++			#define AMAZON_SE_PMU                      (KSEG1+0x1F102000)
++		#endif
++		#ifndef AMAZON_SE_PMU_PWDCR
++			#define AMAZON_SE_PMU_PWDCR                ((volatile unsigned long *)(AMAZON_SE_PMU+0x001C))
++		#endif
++
++		#define default_param_dma_burst_size      4
++
++		#define default_param_speed               IFXUSB_PARAM_SPEED_HIGH
++
++		#define default_param_max_transfer_size   -1  //(Max, hwcfg)
++		#define default_param_max_packet_count    -1  //(Max, hwcfg)
++		#define default_param_phy_utmi_width      16
++
++		#define default_param_turn_around_time_hs 4 //(NoChange)
++		#define default_param_turn_around_time_fs 4 //(NoChange)
++		#define default_param_timeout_cal_hs      -1 //(NoChange)
++		#define default_param_timeout_cal_fs      -1 //(NoChange)
++
++		#define default_param_data_fifo_size      -1 //(Max, hwcfg)
++
++		#ifdef __IS_HOST__
++			#define default_param_host_channels       -1 //(Max, hwcfg)
++			#define default_param_rx_fifo_size        240
++			#define default_param_nperio_tx_fifo_size 240
++			#define default_param_perio_tx_fifo_size  32
++		#endif //__IS_HOST__
++		#ifdef __IS_DEVICE__
++			#ifdef __DED_INTR__
++				#define default_param_rx_fifo_size          256
++				#define default_param_nperio_tx_fifo_size   248
++				#define default_param_perio_tx_fifo_size_01 8
++			#else
++				#define default_param_rx_fifo_size          256
++				#define default_param_nperio_tx_fifo_size   256
++				#define default_param_perio_tx_fifo_size_01 0
++			#endif
++			#define default_param_perio_tx_fifo_size_02 0
++			#define default_param_perio_tx_fifo_size_03 0
++			#define default_param_perio_tx_fifo_size_04 0
++			#define default_param_perio_tx_fifo_size_05 0
++			#define default_param_perio_tx_fifo_size_06 0
++			#define default_param_perio_tx_fifo_size_07 0
++			#define default_param_perio_tx_fifo_size_08 0
++			#define default_param_perio_tx_fifo_size_09 0
++			#define default_param_perio_tx_fifo_size_10 0
++			#define default_param_perio_tx_fifo_size_11 0
++			#define default_param_perio_tx_fifo_size_12 0
++			#define default_param_perio_tx_fifo_size_13 0
++			#define default_param_perio_tx_fifo_size_14 0
++			#define default_param_perio_tx_fifo_size_15 0
++		#endif //__IS_DEVICE__
++
++	#elif defined(__IS_AR9__)
++//		#define IFXUSB1_IRQ 54
++		#define IFXUSB1_IOMEM_BASE   0x1E101000
++		#define IFXUSB1_FIFOMEM_BASE 0x1E120000
++		#define IFXUSB1_FIFODBG_BASE 0x1E140000
++
++//		#define IFXUSB2_IRQ 83
++		#define IFXUSB2_IOMEM_BASE   0x1E106000
++		#define IFXUSB2_FIFOMEM_BASE 0x1E1E0000
++		#define IFXUSB2_FIFODBG_BASE 0x1E1C0000
++
++//		#define IFXUSB_OC_IRQ 60
++
++		#ifndef AMAZON_S_RCU_BASE_ADDR
++			#define AMAZON_S_RCU_BASE_ADDR                (0xBF203000)
++		#endif
++
++		#ifndef AMAZON_S_CGU
++			#define AMAZON_S_CGU                          (0xBF103000)
++		#endif
++		#ifndef AMAZON_S_CGU_IFCCR
++			#define AMAZON_S_CGU_IFCCR                        ((volatile unsigned long *)(AMAZON_S_CGU+ 0x0018))
++		#endif
++
++		#ifndef AMAZON_S_PMU
++			#define AMAZON_S_PMU                              (KSEG1+0x1F102000)
++		#endif
++		#ifndef AMAZON_S_PMU_PWDCR
++			#define AMAZON_S_PMU_PWDCR                        ((volatile unsigned long *)(AMAZON_S_PMU+0x001C))
++		#endif
++
++		#ifndef AMAZON_S_GPIO_P0_OUT
++			#define AMAZON_S_GPIO_P0_OUT                      (0xBF103000+0x10)
++			#define AMAZON_S_GPIO_P0_DIR                      (0xBF103000+0x18)
++			#define AMAZON_S_GPIO_P0_ALTSEL0                  (0xBF103000+0x1C)
++			#define AMAZON_S_GPIO_P0_ALTSEL1                  (0xBF103000+0x20)
++			#define AMAZON_S_GPIO_P0_OD                       (0xBF103000+0x24)
++			#define AMAZON_S_GPIO_P0_PUDSEL                   (0xBF103000+0x2C)
++			#define AMAZON_S_GPIO_P0_PUDEN                    (0xBF103000+0x30)
++			#define AMAZON_S_GPIO_P1_OUT                      (0xBF103000+0x40)
++			#define AMAZON_S_GPIO_P1_DIR                      (0xBF103000+0x48)
++			#define AMAZON_S_GPIO_P1_ALTSEL0                  (0xBF103000+0x4C)
++			#define AMAZON_S_GPIO_P1_ALTSEL1                  (0xBF103000+0x50)
++			#define AMAZON_S_GPIO_P1_OD                       (0xBF103000+0x54)
++			#define AMAZON_S_GPIO_P1_PUDSEL                   (0xBF103000+0x5C)
++			#define AMAZON_S_GPIO_P1_PUDEN                    (0xBF103000+0x60)
++		#endif
++
++		#define AMAZON_S_RCU_USB1CFG  ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x18))
++		#define AMAZON_S_RCU_USB2CFG  ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x34))
++		#define AMAZON_S_RCU_USBRESET ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x10))
++		#define AMAZON_S_USBCFG_ARB          7	//
++		#define AMAZON_S_USBCFG_HDSEL_BIT    11	// 0:host, 1:device
++		#define AMAZON_S_USBCFG_HOST_END_BIT 10	// 0:little_end, 1:big_end
++		#define AMAZON_S_USBCFG_SLV_END_BIT  17	// 0:little_end, 1:big_end
++
++		#define default_param_dma_burst_size      4
++
++		#define default_param_speed               IFXUSB_PARAM_SPEED_HIGH
++
++		#define default_param_max_transfer_size   -1  //(Max, hwcfg)
++		#define default_param_max_packet_count    -1  //(Max, hwcfg)
++		#define default_param_phy_utmi_width      16
++
++		#define default_param_turn_around_time_hs 4 //(NoChange)
++		#define default_param_turn_around_time_fs 4 //(NoChange)
++		#define default_param_timeout_cal_hs      -1 //(NoChange)
++		#define default_param_timeout_cal_fs      -1 //(NoChange)
++
++		#define default_param_data_fifo_size      -1 //(Max, hwcfg)
++
++		#ifdef __IS_HOST__
++			#define default_param_host_channels       -1 //(Max, hwcfg)
++			#define default_param_rx_fifo_size        240
++			#define default_param_nperio_tx_fifo_size 240
++			#define default_param_perio_tx_fifo_size  32
++		#endif //__IS_HOST__
++		#ifdef __IS_DEVICE__
++			#ifdef __DED_INTR__
++				#define default_param_rx_fifo_size          256
++				#define default_param_nperio_tx_fifo_size   248
++				#define default_param_perio_tx_fifo_size_01 8
++			#else
++				#define default_param_rx_fifo_size          256
++				#define default_param_nperio_tx_fifo_size   256
++				#define default_param_perio_tx_fifo_size_01 0
++			#endif
++			#define default_param_perio_tx_fifo_size_02 0
++			#define default_param_perio_tx_fifo_size_03 0
++			#define default_param_perio_tx_fifo_size_04 0
++			#define default_param_perio_tx_fifo_size_05 0
++			#define default_param_perio_tx_fifo_size_06 0
++			#define default_param_perio_tx_fifo_size_07 0
++			#define default_param_perio_tx_fifo_size_08 0
++			#define default_param_perio_tx_fifo_size_09 0
++			#define default_param_perio_tx_fifo_size_10 0
++			#define default_param_perio_tx_fifo_size_11 0
++			#define default_param_perio_tx_fifo_size_12 0
++			#define default_param_perio_tx_fifo_size_13 0
++			#define default_param_perio_tx_fifo_size_14 0
++			#define default_param_perio_tx_fifo_size_15 0
++		#endif //__IS_DEVICE__
++
++	#elif defined(__IS_VR9__)
++//		#define IFXUSB1_IRQ 54
++		#define IFXUSB1_IOMEM_BASE   0x1E101000
++		#define IFXUSB1_FIFOMEM_BASE 0x1E120000
++		#define IFXUSB1_FIFODBG_BASE 0x1E140000
++
++//		#define IFXUSB2_IRQ 83
++		#define IFXUSB2_IOMEM_BASE   0x1E106000
++		#define IFXUSB2_FIFOMEM_BASE 0x1E1E0000
++		#define IFXUSB2_FIFODBG_BASE 0x1E1C0000
++//		#define IFXUSB_OC_IRQ 60
++
++		#ifndef AMAZON_S_RCU_BASE_ADDR
++			#define AMAZON_S_RCU_BASE_ADDR            (0xBF203000)
++		#endif
++
++		#ifndef AMAZON_S_CGU
++			#define AMAZON_S_CGU                          (0xBF103000)
++		#endif
++		#ifndef AMAZON_S_CGU_IFCCR
++			#define AMAZON_S_CGU_IFCCR                        ((volatile unsigned long *)(AMAZON_S_CGU+ 0x0018))
++		#endif
++
++		#ifndef AMAZON_S_PMU
++			#define AMAZON_S_PMU                              (KSEG1+0x1F102000)
++		#endif
++		#ifndef AMAZON_S_PMU_PWDCR
++			#define AMAZON_S_PMU_PWDCR                        ((volatile unsigned long *)(AMAZON_S_PMU+0x001C))
++		#endif
++
++		#ifndef AMAZON_S_GPIO_P0_OUT
++			#define AMAZON_S_GPIO_P0_OUT                      (0xBF103000+0x10)
++			#define AMAZON_S_GPIO_P0_DIR                      (0xBF103000+0x18)
++			#define AMAZON_S_GPIO_P0_ALTSEL0                  (0xBF103000+0x1C)
++			#define AMAZON_S_GPIO_P0_ALTSEL1                  (0xBF103000+0x20)
++			#define AMAZON_S_GPIO_P0_OD                       (0xBF103000+0x24)
++			#define AMAZON_S_GPIO_P0_PUDSEL                   (0xBF103000+0x2C)
++			#define AMAZON_S_GPIO_P0_PUDEN                    (0xBF103000+0x30)
++			#define AMAZON_S_GPIO_P1_OUT                      (0xBF103000+0x40)
++			#define AMAZON_S_GPIO_P1_DIR                      (0xBF103000+0x48)
++			#define AMAZON_S_GPIO_P1_ALTSEL0                  (0xBF103000+0x4C)
++			#define AMAZON_S_GPIO_P1_ALTSEL1                  (0xBF103000+0x50)
++			#define AMAZON_S_GPIO_P1_OD                       (0xBF103000+0x54)
++			#define AMAZON_S_GPIO_P1_PUDSEL                   (0xBF103000+0x5C)
++			#define AMAZON_S_GPIO_P1_PUDEN                    (0xBF103000+0x60)
++		#endif
++
++		#define AMAZON_S_RCU_USB1CFG  ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x18))
++		#define AMAZON_S_RCU_USB2CFG  ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x34))
++		#define AMAZON_S_RCU_USBRESET ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x10))
++		#define AMAZON_S_USBCFG_ARB          7	//
++		#define AMAZON_S_USBCFG_HDSEL_BIT    11	// 0:host, 1:device
++		#define AMAZON_S_USBCFG_HOST_END_BIT 10	// 0:little_end, 1:big_end
++		#define AMAZON_S_USBCFG_SLV_END_BIT  17	// 0:little_end, 1:big_end
++
++		#define default_param_dma_burst_size 4      //(ALL)
++
++		#define default_param_speed               IFXUSB_PARAM_SPEED_HIGH
++
++		#define default_param_max_transfer_size -1  //(Max, hwcfg)
++		#define default_param_max_packet_count  -1  //(Max, hwcfg)
++		#define default_param_phy_utmi_width    16
++
++		#define default_param_turn_around_time_hs 6 //(NoChange) snpsid >= 0x4f54260a
++		#define default_param_turn_around_time_fs 6 //(NoChange) snpsid >= 0x4f54260a
++		#define default_param_timeout_cal_hs      -1 //(NoChange)
++		#define default_param_timeout_cal_fs      -1 //(NoChange)
++
++		#define default_param_data_fifo_size      -1 //(Max, hwcfg)
++
++		#ifdef __IS_HOST__
++			#define default_param_host_channels       -1 //(Max, hwcfg)
++			#define default_param_rx_fifo_size        240
++			#define default_param_nperio_tx_fifo_size 240
++			#define default_param_perio_tx_fifo_size  32
++		#endif //__IS_HOST__
++		#ifdef __IS_DEVICE__
++				#define default_param_rx_fifo_size          256
++			#define default_param_tx_fifo_size_00 -1
++			#define default_param_tx_fifo_size_01 -1
++			#define default_param_tx_fifo_size_02 -1
++			#define default_param_tx_fifo_size_03 -1
++			#define default_param_tx_fifo_size_04 -1
++			#define default_param_tx_fifo_size_05 -1
++			#define default_param_tx_fifo_size_06 -1
++			#define default_param_tx_fifo_size_07 -1
++			#define default_param_tx_fifo_size_08 -1
++			#define default_param_tx_fifo_size_09 -1
++			#define default_param_tx_fifo_size_10 -1
++			#define default_param_tx_fifo_size_11 -1
++			#define default_param_tx_fifo_size_12 -1
++			#define default_param_tx_fifo_size_13 -1
++			#define default_param_tx_fifo_size_14 -1
++			#define default_param_tx_fifo_size_15 -1
++			#define default_param_dma_unalgned_tx -1
++			#define default_param_dma_unalgned_rx -1
++			#define default_param_thr_ctl         -1
++			#define default_param_tx_thr_length   -1
++			#define default_param_rx_thr_length   -1
++		#endif //__IS_DEVICE__
++	#else // __IS_VR9__
++		#error "Please choose one platform!!"
++	#endif // __IS_VR9__
++#endif //UEIP
++
++/*@}*//*IFXUSB_PLATEFORM_MEM_ADDR*/
++
++/////////////////////////////////////////////////////////////////////////
++
++#ifdef __IS_HOST__
++	#ifdef CONFIG_USB_HOST_IFX_FORCE_USB11
++		#undef  default_param_speed
++		#define default_param_speed               IFXUSB_PARAM_SPEED_FULL
++	#endif
++#endif
++#ifdef __IS_DEVICE__
++	#ifndef CONFIG_USB_GADGET_DUALSPEED
++		#undef  default_param_speed
++		#define default_param_speed               IFXUSB_PARAM_SPEED_FULL
++	#endif
++#endif
++
++/////////////////////////////////////////////////////////////////////////
++
++static __inline__ void UDELAY( const uint32_t _usecs )
++{
++	udelay( _usecs );
++}
++
++static __inline__ void MDELAY( const uint32_t _msecs )
++{
++	mdelay( _msecs );
++}
++
++static __inline__ void SPIN_LOCK( spinlock_t *_lock )
++{
++	spin_lock(_lock);
++}
++
++static __inline__ void SPIN_UNLOCK( spinlock_t *_lock )
++{
++	spin_unlock(_lock);
++}
++
++#define SPIN_LOCK_IRQSAVE( _l, _f )  \
++	{ \
++	spin_lock_irqsave(_l,_f); \
++	}
++
++#define SPIN_UNLOCK_IRQRESTORE( _l,_f ) \
++	{ \
++	spin_unlock_irqrestore(_l,_f); \
++	}
++
++/////////////////////////////////////////////////////////////////////////
++/*!
++  \addtogroup IFXUSB_DBG_ROUTINE
++ */
++/*@{*/
++#ifdef __IS_HOST__
++	extern uint32_t h_dbg_lvl;
++#endif
++
++#ifdef __IS_DEVICE__
++	extern uint32_t d_dbg_lvl;
++#endif
++
++/*! \brief When debug level has the DBG_CIL bit set, display CIL Debug messages. */
++#define DBG_CIL		(0x2)
++/*! \brief When debug level has the DBG_CILV bit set, display CIL Verbose debug messages */
++#define DBG_CILV	(0x20)
++/*! \brief When debug level has the DBG_PCD bit set, display PCD (Device) debug messages */
++#define DBG_PCD		(0x4)
++/*! \brief When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug messages */
++#define DBG_PCDV	(0x40)
++/*! \brief When debug level has the DBG_HCD bit set, display Host debug messages */
++#define DBG_HCD		(0x8)
++/*! \brief When debug level has the DBG_HCDV bit set, display Verbose Host debug messages */
++#define DBG_HCDV	(0x80)
++/*! \brief When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host mode. */
++#define DBG_HCD_URB	(0x800)
++/*! \brief When debug level has any bit set, display debug messages */
++#define DBG_ANY		(0xFF)
++/*! \brief All debug messages off */
++#define DBG_OFF		0
++
++#define DBG_ENTRY	(0x8000)
++
++#define IFXUSB "IFXUSB: "
++
++/*!
++   \fn    inline uint32_t SET_DEBUG_LEVEL( const uint32_t _new )
++   \brief Set the Debug Level variable.
++   \param _new 32-bit mask of debug level.
++   \return previous debug level
++ */
++static inline uint32_t SET_DEBUG_LEVEL( const uint32_t _new )
++{
++	#ifdef __IS_HOST__
++		uint32_t old = h_dbg_lvl;
++		h_dbg_lvl = _new;
++	#endif
++
++	#ifdef __IS_DEVICE__
++		uint32_t old = d_dbg_lvl;
++		d_dbg_lvl = _new;
++	#endif
++	return old;
++}
++
++#ifdef __DEBUG__
++	#ifdef __IS_HOST__
++		# define IFX_DEBUGPL(lvl, x...) do{ if ((lvl)&h_dbg_lvl)printk( KERN_DEBUG IFXUSB x ); }while(0)
++		# define CHK_DEBUG_LEVEL(level) ((level) & h_dbg_lvl)
++	#endif
++
++	#ifdef __IS_DEVICE__
++		# define IFX_DEBUGPL(lvl, x...) do{ if ((lvl)&d_dbg_lvl)printk( KERN_DEBUG IFXUSB x ); }while(0)
++		# define CHK_DEBUG_LEVEL(level) ((level) & d_dbg_lvl)
++	#endif
++
++	# define IFX_DEBUGP(x...)	IFX_DEBUGPL(DBG_ANY, x )
++#else
++	# define IFX_DEBUGPL(lvl, x...) do{}while(0)
++	# define IFX_DEBUGP(x...)
++	# define CHK_DEBUG_LEVEL(level) (0)
++#endif //__DEBUG__
++
++/* Print an Error message. */
++#define IFX_ERROR(x...) printk( KERN_ERR IFXUSB x )
++/* Print a Warning message. */
++#define IFX_WARN(x...) printk( KERN_WARNING IFXUSB x )
++/* Print a notice (normal but significant message). */
++#define IFX_NOTICE(x...) printk( KERN_NOTICE IFXUSB x )
++/*  Basic message printing. */
++#define IFX_PRINT(x...) printk( KERN_INFO IFXUSB x )
++
++/*@}*//*IFXUSB_DBG_ROUTINE*/
++
++
++#endif //__IFXUSB_PLAT_H__
++
+diff --git a/drivers/usb/ifxhcd/ifxusb_regs.h b/drivers/usb/ifxhcd/ifxusb_regs.h
+new file mode 100644
+index 0000000..014c6db
+--- /dev/null
++++ b/drivers/usb/ifxhcd/ifxusb_regs.h
+@@ -0,0 +1,1420 @@
++/*****************************************************************************
++ **   FILE NAME       : ifxusb_regs.h
++ **   PROJECT         : IFX USB sub-system V3
++ **   MODULES         : IFX USB sub-system Host and Device driver
++ **   SRC VERSION     : 1.0
++ **   DATE            : 1/Jan/2009
++ **   AUTHOR          : Chen, Howard
++ **   DESCRIPTION     : This file contains the data structures for accessing the IFXUSB core
++ **                     registers.
++ **                     The application interfaces with the USB core by reading from and
++ **                     writing to the Control and Status Register (CSR) space through the
++ **                     AHB Slave interface. These registers are 32 bits wide, and the
++ **                     addresses are 32-bit-block aligned.
++ **                     CSRs are classified as follows:
++ **                     - Core Global Registers
++ **                     - Device Mode Registers
++ **                     - Device Global Registers
++ **                     - Device Endpoint Specific Registers
++ **                     - Host Mode Registers
++ **                     - Host Global Registers
++ **                     - Host Port CSRs
++ **                     - Host Channel Specific Registers
++ **
++ **                     Only the Core Global registers can be accessed in both Device and
++ **                     Host modes. When the USB core is operating in one mode, either
++ **                     Device or Host, the application must not access registers from the
++ **                     other mode. When the core switches from one mode to another, the
++ **                     registers in the new mode of operation must be reprogrammed as they
++ **                     would be after a power-on reset.
++ **   FUNCTIONS       :
++ **   COMPILER        : gcc
++ **   REFERENCE       : Synopsys DWC-OTG Driver 2.7
++ **   COPYRIGHT       :
++ **  Version Control Section  **
++ **   $Author$
++ **   $Date$
++ **   $Revisions$
++ **   $Log$       Revision history
++*****************************************************************************/
++
++
++
++/*!
++  \defgroup IFXUSB_CSR_DEFINITION Control and Status Register bit-map definition
++  \ingroup IFXUSB_DRIVER_V3
++   \brief Data structures for accessing the IFXUSB core registers.
++          The application interfaces with the USB core by reading from and
++          writing to the Control and Status Register (CSR) space through the
++          AHB Slave interface. These registers are 32 bits wide, and the
++          addresses are 32-bit-block aligned.
++          CSRs are classified as follows:
++           - Core Global Registers
++           - Device Mode Registers
++           - Device Global Registers
++           - Device Endpoint Specific Registers
++           - Host Mode Registers
++           - Host Global Registers
++           - Host Port CSRs
++           - Host Channel Specific Registers
++
++          Only the Core Global registers can be accessed in both Device andHost modes.
++          When the USB core is operating in one mode, either Device or Host, the
++          application must not access registers from the other mode. When the core
++          switches from one mode to another, the registers in the new mode of operation
++          must be reprogrammed as they would be after a power-on reset.
++ */
++
++/*!
++  \defgroup IFXUSB_CSR_DEVICE_GLOBAL_REG Device Mode Registers
++  \ingroup IFXUSB_CSR_DEFINITION
++  \brief Bit-mapped structure to access Device Mode Global Registers
++ */
++
++/*!
++  \defgroup IFXUSB_CSR_DEVICE_EP_REG Device Mode EP Registers
++  \ingroup IFXUSB_CSR_DEFINITION
++    \brief Bit-mapped structure to access Device Mode EP Registers
++     There will be one set of endpoint registers per logical endpoint
++     implemented.
++     These registers are visible only in Device mode and must not be
++     accessed in Host mode, as the results are unknown.
++ */
++
++/*!
++  \defgroup IFXUSB_CSR_DEVICE_DMA_DESC Device mode scatter dma descriptor strusture
++  \ingroup IFXUSB_CSR_DEFINITION
++  \brief Bit-mapped structure to DMA descriptor
++ */
++
++
++/*!
++  \defgroup IFXUSB_CSR_HOST_GLOBAL_REG Host Mode Registers
++  \ingroup IFXUSB_CSR_DEFINITION
++  \brief Bit-mapped structure to access Host Mode Global Registers
++ */
++
++/*!
++  \defgroup IFXUSB_CSR_HOST_HC_REG Host Mode HC Registers
++  \ingroup IFXUSB_CSR_DEFINITION
++    \brief Bit-mapped structure to access Host Mode Host Channel Registers
++     There will be one set of endpoint registers per host channel
++     implemented.
++     These registers are visible only in Host mode and must not be
++     accessed in Device mode, as the results are unknown.
++ */
++
++/*!
++  \defgroup IFXUSB_CSR_PWR_CLK_GATING_REG Power and Clock Gating Control Register
++  \ingroup IFXUSB_CSR_DEFINITION
++  \brief Bit-mapped structure to Power and Clock Gating Control Register
++ */
++
++
++
++
++
++
++
++
++/*!
++  \defgroup IFXUSB_CSR_CORE_GLOBAL_REG Core Global Registers
++  \ingroup IFXUSB_CSR_DEFINITION
++  \brief Bit-mapped structure to access Core Global Registers
++ */
++/*!
++  \defgroup IFXUSB_CSR_CORE_GLOBAL_REG Core Global Registers
++  \ingroup IFXUSB_CSR_DEFINITION
++  \brief Bit-mapped structure to access Core Global Registers
++ */
++
++
++
++
++
++
++
++
++
++/*!
++  \file ifxusb_regs.h
++  \ingroup IFXUSB_DRIVER_V3
++  \brief This file contains the data structures for accessing the IFXUSB core registers.
++ */
++
++
++#ifndef __IFXUSB_REGS_H__
++#define __IFXUSB_REGS_H__
++
++/****************************************************************************/
++
++#define MAX_PERIO_FIFOS  15  /** Maximum number of Periodic FIFOs */
++#define MAX_TX_FIFOS     15  /** Maximum number of Periodic FIFOs */
++#define MAX_EPS_CHANNELS 16  /** Maximum number of Endpoints/HostChannels */
++
++/****************************************************************************/
++
++/*!
++  \addtogroup IFXUSB_CSR_ACCESS_MACROS
++ */
++/*@{*/
++
++//#define RecordRegRW
++
++/*!
++   \fn    static __inline__ uint32_t ifxusb_rreg( volatile uint32_t *_reg)
++   \brief Reads the content of a register.
++   \param  _reg address of register to read.
++   \return contents of the register.
++ */
++static __inline__ uint32_t ifxusb_rreg( volatile uint32_t *_reg)
++{
++	#ifdef RecordRegRW
++		uint32_t r;
++		r=*(_reg);
++		return (r);
++	#else
++		return (*(_reg));
++	#endif
++};
++
++
++/*!
++   \fn    static __inline__ void ifxusb_wreg( volatile uint32_t *_reg, const uint32_t _value)
++   \brief Writes a register with a 32 bit value.
++   \param _reg   address of register to write.
++   \param _value value to write to _reg.
++ */
++static __inline__ void ifxusb_wreg( volatile uint32_t *_reg, const uint32_t _value)
++{
++	#ifdef RecordRegRW
++		printk(KERN_INFO "[W %p<-%08X]\n",_reg,_value);
++	#else
++		*(_reg)=_value;
++	#endif
++};
++
++/*!
++   \fn    static __inline__ void ifxusb_mreg( volatile uint32_t *_reg, const uint32_t _clear_mask, const uint32_t _set_mask)
++   \brief Modifies bit values in a register.  Using the
++          algorithm: (reg_contents & ~clear_mask) | set_mask.
++   \param _reg        address of register to modify.
++   \param _clear_mask bit mask to be cleared.
++   \param _set_mask   bit mask to be set.
++ */
++static __inline__ void ifxusb_mreg( volatile uint32_t *_reg, const uint32_t _clear_mask, const uint32_t _set_mask)
++{
++	uint32_t v;
++	#ifdef RecordRegRW
++		uint32_t r;
++		v=  *(_reg);
++		r=v;
++		r&=(~_clear_mask);
++		r|= _set_mask;
++		*(_reg)=r ;
++		printk(KERN_INFO "[M %p->%08X+%08X/%08X<-%08X]\n",_reg,r,_clear_mask,_set_mask,r);
++	#else
++		v=  *(_reg);
++		v&=(~_clear_mask);
++		v|= _set_mask;
++		*(_reg)=v ;
++	#endif
++};
++
++/*@}*//*IFXUSB_CSR_ACCESS_MACROS*/
++/****************************************************************************/
++
++/*!
++  \addtogroup IFXUSB_CSR_CORE_GLOBAL_REG
++ */
++/*@{*/
++
++/*!
++ \struct ifxusb_core_global_regs
++ \brief IFXUSB Core registers .
++         The ifxusb_core_global_regs structure defines the size
++         and relative field offsets for the Core Global registers.
++ */
++typedef struct ifxusb_core_global_regs
++{
++	volatile uint32_t gotgctl;             /*!< 000h OTG Control and Status Register. */
++	volatile uint32_t gotgint;             /*!< 004h OTG Interrupt Register. */
++	volatile uint32_t gahbcfg;             /*!< 008h Core AHB Configuration Register. */
++	volatile uint32_t gusbcfg;             /*!< 00Ch Core USB Configuration Register. */
++	volatile uint32_t grstctl;             /*!< 010h Core Reset Register. */
++	volatile uint32_t gintsts;             /*!< 014h Core Interrupt Register. */
++	volatile uint32_t gintmsk;             /*!< 018h Core Interrupt Mask Register. */
++	volatile uint32_t grxstsr;             /*!< 01Ch Receive Status Queue Read Register (Read Only). */
++	volatile uint32_t grxstsp;             /*!< 020h Receive Status Queue Read & POP Register (Read Only). */
++	volatile uint32_t grxfsiz;             /*!< 024h Receive FIFO Size Register. */
++	volatile uint32_t gnptxfsiz;           /*!< 028h Non Periodic Transmit FIFO Size Register. */
++	volatile uint32_t gnptxsts;            /*!< 02Ch Non Periodic Transmit FIFO/Queue Status Register (Read Only). */
++	volatile uint32_t gi2cctl;             /*!< 030h I2C Access Register. */
++	volatile uint32_t gpvndctl;            /*!< 034h PHY Vendor Control Register. */
++	volatile uint32_t ggpio;               /*!< 038h General Purpose Input/Output Register. */
++	volatile uint32_t guid;                /*!< 03Ch User ID Register. */
++	volatile uint32_t gsnpsid;             /*!< 040h Synopsys ID Register (Read Only). */
++	volatile uint32_t ghwcfg1;             /*!< 044h User HW Config1 Register (Read Only). */
++	volatile uint32_t ghwcfg2;             /*!< 048h User HW Config2 Register (Read Only). */
++	volatile uint32_t ghwcfg3;             /*!< 04Ch User HW Config3 Register (Read Only). */
++	volatile uint32_t ghwcfg4;             /*!< 050h User HW Config4 Register (Read Only). */
++	volatile uint32_t reserved[43];        /*!< 054h Reserved  054h-0FFh */
++	volatile uint32_t hptxfsiz;            /*!< 100h Host Periodic Transmit FIFO Size Register. */
++	volatile uint32_t dptxfsiz_dieptxf[15];/*!< 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15.
++	                                           Device Periodic Transmit FIFO#n Register if dedicated
++	                                           fifos are disabled, otherwise Device Transmit FIFO#n
++	                                           Register.
++	                                         */
++} ifxusb_core_global_regs_t;
++
++/*!
++ \brief Bits of the Core OTG Control and Status Register (GOTGCTL).
++ */
++typedef union gotgctl_data
++{
++	uint32_t d32;
++	struct{
++		unsigned reserved21_31 : 11;
++		unsigned currmod       : 1 ; /*!< 20 */
++		unsigned bsesvld       : 1 ; /*!< 19 */
++		unsigned asesvld       : 1 ; /*!< 18 */
++		unsigned reserved17    : 1 ;
++		unsigned conidsts      : 1 ; /*!< 16 */
++		unsigned reserved12_15 : 4 ;
++		unsigned devhnpen      : 1 ; /*!< 11 */
++		unsigned hstsethnpen   : 1 ; /*!< 10 */
++		unsigned hnpreq        : 1 ; /*!< 09 */
++		unsigned hstnegscs     : 1 ; /*!< 08 */
++		unsigned reserved2_7   : 6 ;
++		unsigned sesreq        : 1 ; /*!< 01 */
++		unsigned sesreqscs     : 1 ; /*!< 00 */
++	} b;
++} gotgctl_data_t;
++
++/*!
++ \brief Bit fields of the Core OTG Interrupt Register (GOTGINT).
++ */
++typedef union gotgint_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned reserved31_20     : 12;
++		unsigned debdone           : 1 ; /*!< 19 Debounce Done */
++		unsigned adevtoutchng      : 1 ; /*!< 18 A-Device Timeout Change */
++		unsigned hstnegdet         : 1 ; /*!< 17 Host Negotiation Detected */
++		unsigned reserver10_16     : 7 ;
++		unsigned hstnegsucstschng  : 1 ; /*!< 09 Host Negotiation Success Status Change */
++		unsigned sesreqsucstschng  : 1 ; /*!< 08 Session Request Success Status Change */
++		unsigned reserved3_7       : 5 ;
++		unsigned sesenddet         : 1 ; /*!< 02 Session End Detected */
++		unsigned reserved0_1       : 2 ;
++	} b;
++} gotgint_data_t;
++
++/*!
++ \brief Bit fields of the Core AHB Configuration Register (GAHBCFG).
++ */
++typedef union gahbcfg_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned reserved9_31      : 23;
++		unsigned ptxfemplvl        : 1 ; /*!< 08    Periodic FIFO empty level trigger condition*/
++		unsigned nptxfemplvl       : 1 ; /*!< 07    Non-Periodic FIFO empty level trigger condition*/
++			#define IFXUSB_GAHBCFG_TXFEMPTYLVL_EMPTY     1
++			#define IFXUSB_GAHBCFG_TXFEMPTYLVL_HALFEMPTY 0
++		unsigned reserved          : 1 ;
++		unsigned dmaenable         : 1 ; /*!< 05    DMA enable*/
++			#define IFXUSB_GAHBCFG_DMAENABLE             1
++		unsigned hburstlen         : 4 ; /*!< 01-04 DMA Burst-length*/
++			#define IFXUSB_GAHBCFG_INT_DMA_BURST_SINGLE  0
++			#define IFXUSB_GAHBCFG_INT_DMA_BURST_INCR    1
++			#define IFXUSB_GAHBCFG_INT_DMA_BURST_INCR4   3
++			#define IFXUSB_GAHBCFG_INT_DMA_BURST_INCR8   5
++			#define IFXUSB_GAHBCFG_INT_DMA_BURST_INCR16  7
++		unsigned glblintrmsk       : 1 ;  /*!< 00    USB Global Interrupt Enable */
++			#define IFXUSB_GAHBCFG_GLBINT_ENABLE         1
++	} b;
++} gahbcfg_data_t;
++
++/*!
++ \brief Bit fields of the Core USB Configuration Register (GUSBCFG).
++*/
++typedef union gusbcfg_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned reserved31              : 1;
++		unsigned ForceDevMode            : 1; /*!< 30 Force Device Mode */
++		unsigned ForceHstMode            : 1; /*!< 29 Force Host Mode */
++		unsigned TxEndDelay              : 1; /*!< 28 Tx End Delay */
++		unsigned reserved2723            : 5;
++		unsigned term_sel_dl_pulse       : 1; /*!< 22 TermSel DLine Pulsing Selection */
++		unsigned reserved2117            : 5;
++		unsigned otgutmifssel            : 1; /*!< 16 UTMIFS Select */
++		unsigned phylpwrclksel           : 1; /*!< 15 PHY Low-Power Clock Select */
++		unsigned reserved14              : 1;
++		unsigned usbtrdtim               : 4; /*!< 13-10 USB Turnaround Time */
++		unsigned hnpcap                  : 1; /*!< 09 HNP-Capable */
++		unsigned srpcap                  : 1; /*!< 08 SRP-Capable */
++		unsigned reserved07              : 1;
++		unsigned physel                  : 1; /*!< 06 USB 2.0 High-Speed PHY or
++		                                             USB 1.1 Full-Speed Serial
++		                                             Transceiver Select */
++		unsigned fsintf                  : 1; /*!< 05 Full-Speed Serial Interface Select */
++		unsigned ulpi_utmi_sel           : 1; /*!< 04 ULPI or UTMI+ Select */
++		unsigned phyif                   : 1; /*!< 03 PHY Interface */
++		unsigned toutcal                 : 3; /*!< 00-02 HS/FS Timeout Calibration */
++	}b;
++} gusbcfg_data_t;
++
++/*!
++ \brief Bit fields of the Core Reset Register (GRSTCTL).
++ */
++typedef union grstctl_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned ahbidle         : 1; /*!< 31 AHB Master Idle.  Indicates the AHB Master State
++		                                     Machine is in IDLE condition. */
++		unsigned dmareq          : 1; /*!< 30 DMA Request Signal.  Indicated DMA request is in
++		                                     probress.  Used for debug purpose. */
++		unsigned reserved11_29   :19;
++		unsigned txfnum          : 5; /*!< 10-06 TxFIFO Number (TxFNum) to be flushed.
++		                                  0x00: Non Periodic TxFIFO Flush or TxFIFO 0
++		                                  0x01-0x0F: Periodic TxFIFO Flush or TxFIFO n
++		                                  0x10: Flush all TxFIFO
++		                               */
++		unsigned txfflsh         : 1; /*!< 05 TxFIFO Flush */
++		unsigned rxfflsh         : 1; /*!< 04 RxFIFO Flush */
++		unsigned intknqflsh      : 1; /*!< 03 In Token Sequence Learning Queue Flush (Device Only) */
++		unsigned hstfrm          : 1; /*!< 02 Host Frame Counter Reset (Host Only) */
++		unsigned hsftrst         : 1; /*!< 01 Hclk Soft Reset */
++
++		unsigned csftrst         : 1; /*!< 00 Core Soft Reset
++		                                     The application can flush the control logic in the
++		                                     entire core using this bit. This bit resets the
++		                                     pipelines in the AHB Clock domain as well as the
++		                                     PHY Clock domain.
++		                                     The state machines are reset to an IDLE state, the
++		                                     control bits in the CSRs are cleared, all the
++		                                     transmit FIFOs and the receive FIFO are flushed.
++		                                     The status mask bits that control the generation of
++		                                     the interrupt, are cleared, to clear the
++		                                     interrupt. The interrupt status bits are not
++		                                     cleared, so the application can get the status of
++		                                     any events that occurred in the core after it has
++		                                     set this bit.
++		                                     Any transactions on the AHB are terminated as soon
++		                                     as possible following the protocol. Any
++		                                     transactions on the USB are terminated immediately.
++		                                     The configuration settings in the CSRs are
++		                                     unchanged, so the software doesn't have to
++		                                     reprogram these registers (Device
++		                                     Configuration/Host Configuration/Core System
++		                                     Configuration/Core PHY Configuration).
++		                                     The application can write to this bit, any time it
++		                                     wants to reset the core. This is a self clearing
++		                                     bit and the core clears this bit after all the
++		                                     necessary logic is reset in the core, which may
++		                                     take several clocks, depending on the current state
++		                                     of the core.
++		                               */
++	}b;
++} grstctl_t;
++
++/*!
++ \brief Bit fields of the Core Interrupt Mask Register (GINTMSK) and
++        Core Interrupt Register (GINTSTS).
++ */
++typedef union gint_data
++{
++	uint32_t d32;
++		#define IFXUSB_SOF_INTR_MASK 0x0008
++	struct
++	{
++		unsigned wkupintr      : 1; /*!< 31 Resume/Remote Wakeup Detected Interrupt */
++		unsigned sessreqintr   : 1; /*!< 30 Session Request/New Session Detected Interrupt */
++		unsigned disconnect    : 1; /*!< 29 Disconnect Detected Interrupt */
++		unsigned conidstschng  : 1; /*!< 28 Connector ID Status Change */
++		unsigned reserved27    : 1;
++		unsigned ptxfempty     : 1; /*!< 26 Periodic TxFIFO Empty */
++		unsigned hcintr        : 1; /*!< 25 Host Channels Interrupt */
++		unsigned portintr      : 1; /*!< 24 Host Port Interrupt */
++		unsigned reserved23    : 1;
++		unsigned fetsuspmsk    : 1; /*!< 22 Data Fetch Suspended */
++		unsigned incomplisoout : 1; /*!< 21 Incomplete IsochronousOUT/Period Transfer */
++		unsigned incomplisoin  : 1; /*!< 20 Incomplete Isochronous IN Transfer */
++		unsigned outepintr     : 1; /*!< 19 OUT Endpoints Interrupt */
++		unsigned inepintr      : 1; /*!< 18 IN Endpoints Interrupt */
++		unsigned epmismatch    : 1; /*!< 17 Endpoint Mismatch Interrupt */
++		unsigned reserved16    : 1;
++		unsigned eopframe      : 1; /*!< 15 End of Periodic Frame Interrupt */
++		unsigned isooutdrop    : 1; /*!< 14 Isochronous OUT Packet Dropped Interrupt */
++		unsigned enumdone      : 1; /*!< 13 Enumeration Done */
++		unsigned usbreset      : 1; /*!< 12 USB Reset */
++		unsigned usbsuspend    : 1; /*!< 11 USB Suspend */
++		unsigned erlysuspend   : 1; /*!< 10 Early Suspend */
++		unsigned i2cintr       : 1; /*!< 09 I2C Interrupt */
++		unsigned reserved8     : 1;
++		unsigned goutnakeff    : 1; /*!< 07 Global OUT NAK Effective */
++		unsigned ginnakeff     : 1; /*!< 06 Global Non-periodic IN NAK Effective */
++		unsigned nptxfempty    : 1; /*!< 05 Non-periodic TxFIFO Empty */
++		unsigned rxstsqlvl     : 1; /*!< 04 Receive FIFO Non-Empty */
++		unsigned sofintr       : 1; /*!< 03 Start of (u)Frame */
++		unsigned otgintr       : 1; /*!< 02 OTG Interrupt */
++		unsigned modemismatch  : 1; /*!< 01 Mode Mismatch Interrupt */
++		unsigned reserved0     : 1;
++	} b;
++} gint_data_t;
++
++/*!
++  \brief Bit fields in the Receive Status Read and Pop Registers (GRXSTSR, GRXSTSP)
++ */
++typedef union grxsts_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned reserved : 7;
++		unsigned fn       : 4; /*!< 24-21 Frame Number */
++		unsigned pktsts   : 4; /*!< 20-17 Packet Status */
++			#define IFXUSB_DSTS_DATA_UPDT  	0x2               // OUT Data Packet
++			#define IFXUSB_DSTS_XFER_COMP  	0x3               // OUT Data Transfer Complete
++			#define IFXUSB_DSTS_GOUT_NAK   	0x1               // Global OUT NAK
++			#define IFXUSB_DSTS_SETUP_COMP 	0x4               // Setup Phase Complete
++			#define IFXUSB_DSTS_SETUP_UPDT	0x6               // SETUP Packet
++		unsigned dpid     : 2; /*!< 16-15 Data PID */
++		unsigned bcnt     :11; /*!< 14-04 Byte Count */
++		unsigned epnum    : 4; /*!< 03-00 Endpoint Number */
++	} db;
++	struct
++	{
++		unsigned reserved :11;
++		unsigned pktsts   : 4; /*!< 20-17 Packet Status */
++			#define IFXUSB_HSTS_DATA_UPDT        0x2 // OUT Data Packet
++			#define IFXUSB_HSTS_XFER_COMP        0x3 // OUT Data Transfer Complete
++			#define IFXUSB_HSTS_DATA_TOGGLE_ERR  0x5 // DATA TOGGLE Error
++			#define IFXUSB_HSTS_CH_HALTED        0x7 // Channel Halted
++		unsigned dpid     : 2; /*!< 16-15 Data PID */
++		unsigned bcnt     :11; /*!< 14-04 Byte Count */
++		unsigned chnum    : 4; /*!< 03-00 Channel Number */
++	} hb;
++} grxsts_data_t;
++
++/*!
++  \brief Bit fields in the FIFO Size Registers (HPTXFSIZ, GNPTXFSIZ, DPTXFSIZn).
++ */
++typedef union fifosize_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned depth     : 16; /*!< 31-16 TxFIFO Depth (in DWord)*/
++		unsigned startaddr : 16; /*!< 15-00 RAM Starting address */
++	} b;
++} fifosize_data_t;
++
++/*!
++  \brief Bit fields in the Non-Periodic Transmit FIFO/Queue Status Register (GNPTXSTS).
++ */
++
++typedef union gnptxsts_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned reserved           : 1;
++		unsigned nptxqtop_chnep     : 4; /*!< 30-27 Channel/EP Number of top of the Non-Periodic
++		                                     Transmit Request Queue
++		                                  */
++		unsigned nptxqtop_token     : 2; /*!< 26-25 Token Type top of the Non-Periodic
++		                                     Transmit Request Queue
++	                                          0 - IN/OUT
++	                                          1 - Zero Length OUT
++	                                          2 - PING/Complete Split
++	                                          3 - Channel Halt
++		                                  */
++		unsigned nptxqtop_terminate : 1; /*!< 24    Terminate (Last entry for the selected
++		                                           channel/EP)*/
++		unsigned nptxqspcavail      : 8; /*!< 23-16 Transmit Request Queue Space Available */
++		unsigned nptxfspcavail      :16; /*!< 15-00 TxFIFO Space Avail (in DWord)*/
++	}b;
++} gnptxsts_data_t;
++
++
++/*!
++  \brief Bit fields in the Transmit FIFO Status Register (DTXFSTS).
++ */
++typedef union dtxfsts_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned reserved    : 16;
++		unsigned txfspcavail : 16; /*!< 15-00 TxFIFO Space Avail (in DWord)*/
++	}b;
++} dtxfsts_data_t;
++
++
++/*!
++  \brief Bit fields in the I2C Control Register (I2CCTL).
++ */
++typedef union gi2cctl_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned bsydne     : 1; /*!< 31    I2C Busy/Done*/
++		unsigned rw         : 1; /*!< 30    Read/Write Indicator */
++		unsigned reserved   : 2;
++		unsigned i2cdevaddr : 2; /*!< 27-26 I2C Device Address */
++		unsigned i2csuspctl : 1; /*!< 25    I2C Suspend Control */
++		unsigned ack        : 1; /*!< 24    I2C ACK */
++		unsigned i2cen      : 1; /*!< 23    I2C Enable */
++		unsigned addr       : 7; /*!< 22-16 I2C Address */
++		unsigned regaddr    : 8; /*!< 15-08 I2C Register Addr */
++		unsigned rwdata     : 8; /*!< I2C Read/Write Data */
++	} b;
++} gi2cctl_data_t;
++
++
++/*!
++  \brief Bit fields in the User HW Config1 Register.
++ */
++typedef union hwcfg1_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned ep_dir15 : 2; /*!< Direction of each EP
++		                           0: BIDIR (IN and OUT) endpoint
++	                               1: IN endpoint
++	                               2: OUT endpoint
++	                               3: Reserved
++	                            */
++		unsigned ep_dir14 : 2;
++		unsigned ep_dir13 : 2;
++		unsigned ep_dir12 : 2;
++		unsigned ep_dir11 : 2;
++		unsigned ep_dir10 : 2;
++		unsigned ep_dir09 : 2;
++		unsigned ep_dir08 : 2;
++		unsigned ep_dir07 : 2;
++		unsigned ep_dir06 : 2;
++		unsigned ep_dir05 : 2;
++		unsigned ep_dir04 : 2;
++		unsigned ep_dir03 : 2;
++		unsigned ep_dir02 : 2;
++		unsigned ep_dir01 : 2;
++		unsigned ep_dir00 : 2;
++	}b;
++} hwcfg1_data_t;
++
++/*!
++  \brief Bit fields in the User HW Config2 Register.
++ */
++typedef union hwcfg2_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned reserved31             : 1;
++		unsigned dev_token_q_depth      : 5; /*!< 30-26 Device Mode IN Token Sequence Learning Queue Depth */
++		unsigned host_perio_tx_q_depth  : 2; /*!< 25-24 Host Mode Periodic Request Queue Depth */
++		unsigned nonperio_tx_q_depth    : 2; /*!< 23-22 Non-periodic Request Queue Depth */
++		unsigned rx_status_q_depth      : 2; /*!< 21-20 Multi Processor Interrupt Enabled */
++		unsigned dynamic_fifo           : 1; /*!< 19    Dynamic FIFO Sizing Enabled */
++		unsigned perio_ep_supported     : 1; /*!< 18    Periodic OUT Channels Supported in Host Mode */
++		unsigned num_host_chan          : 4; /*!< 17-14 Number of Host Channels */
++		unsigned num_dev_ep             : 4; /*!< 13-10 Number of Device Endpoints */
++		unsigned fs_phy_type            : 2; /*!< 09-08 Full-Speed PHY Interface Type */
++			#define IFXUSB_HWCFG2_FS_PHY_TYPE_NOT_SUPPORTED 0
++			#define IFXUSB_HWCFG2_FS_PHY_TYPE_DEDICATE      1
++			#define IFXUSB_HWCFG2_FS_PHY_TYPE_UTMI          2
++			#define IFXUSB_HWCFG2_FS_PHY_TYPE_ULPI          3
++		unsigned hs_phy_type            : 2; /*!< 07-06 High-Speed PHY Interface Type */
++			#define IFXUSB_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0
++			#define IFXUSB_HWCFG2_HS_PHY_TYPE_UTMI          1
++			#define IFXUSB_HWCFG2_HS_PHY_TYPE_ULPI          2
++			#define IFXUSB_HWCFG2_HS_PHY_TYPE_UTMI_ULPI     3
++		unsigned point2point            : 1; /*!< 05    Point-to-Point */
++		unsigned architecture           : 2; /*!< 04-03 Architecture */
++			#define IFXUSB_HWCFG2_ARCH_SLAVE_ONLY  0
++			#define IFXUSB_HWCFG2_ARCH_EXT_DMA     1
++			#define IFXUSB_HWCFG2_ARCH_INT_DMA     2
++		unsigned op_mode                : 3; /*!< 02-00 Mode of Operation */
++			#define IFXUSB_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG    0
++			#define IFXUSB_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG   1
++			#define IFXUSB_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2
++			#define IFXUSB_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE     3
++			#define IFXUSB_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE  4
++			#define IFXUSB_HWCFG2_OP_MODE_SRP_CAPABLE_HOST       5
++			#define IFXUSB_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST    6
++	} b;
++} hwcfg2_data_t;
++
++/*!
++  \brief Bit fields in the User HW Config3 Register.
++ */
++typedef union hwcfg3_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned dfifo_depth            :16; /*!< 31-16 DFIFO Depth  */
++		unsigned reserved15_12          : 4;
++		unsigned synch_reset_type       : 1; /*!< 11    Reset Style for Clocked always Blocks in RTL */
++		unsigned optional_features      : 1; /*!< 10    Optional Features Removed */
++		unsigned vendor_ctrl_if         : 1; /*!< 09    Vendor Control Interface Support */
++		unsigned i2c                    : 1; /*!< 08    I2C Selection */
++		unsigned otg_func               : 1; /*!< 07    OTG Function Enabled */
++		unsigned packet_size_cntr_width : 3; /*!< 06-04 Width of Packet Size Counters */
++		unsigned xfer_size_cntr_width   : 4; /*!< 03-00 Width of Transfer Size Counters */
++	} b;
++} hwcfg3_data_t;
++
++/*!
++  \brief Bit fields in the User HW Config4
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg4_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned desc_dma_dyn         : 1; /*!< 31    Scatter/Gather DMA */
++		unsigned desc_dma             : 1; /*!< 30    Scatter/Gather DMA configuration */
++		unsigned num_in_eps           : 4; /*!< 29-26 Number of Device Mode IN Endpoints Including Control Endpoints */
++		unsigned ded_fifo_en          : 1; /*!< 25    Enable Dedicated Transmit FIFO for device IN Endpoints */
++		unsigned session_end_filt_en  : 1; /*!< 24    session_end Filter Enabled */
++		unsigned b_valid_filt_en      : 1; /*!< 23    b_valid Filter Enabled */
++		unsigned a_valid_filt_en      : 1; /*!< 22    a_valid Filter Enabled */
++		unsigned vbus_valid_filt_en   : 1; /*!< 21    vbus_valid Filter Enabled */
++		unsigned iddig_filt_en        : 1; /*!< 20    iddig Filter Enable */
++		unsigned num_dev_mode_ctrl_ep : 4; /*!< 19-16 Number of Device Mode Control Endpoints in Addition to Endpoint 0 */
++		unsigned utmi_phy_data_width  : 2; /*!< 15-14 UTMI+ PHY/ULPI-to-Internal UTMI+ Wrapper Data Width */
++		unsigned reserved13_06        : 8;
++		unsigned min_ahb_freq         : 1; /*!< 05    Minimum AHB Frequency Less Than 60 MHz */
++		unsigned power_optimiz        : 1; /*!< 04    Enable Power Optimization? */
++		unsigned num_dev_perio_in_ep  : 4; /*!< 03-00 Number of Device Mode Periodic IN Endpoints */
++	} b;
++} hwcfg4_data_t;
++
++/*@}*//*IFXUSB_CSR_CORE_GLOBAL_REG*/
++
++/****************************************************************************/
++/*!
++  \addtogroup IFXUSB_CSR_DEVICE_GLOBAL_REG
++ */
++/*@{*/
++
++/*!
++ \struct ifxusb_dev_global_regs
++ \brief IFXUSB Device Mode Global registers. Offsets 800h-BFFh
++        The ifxusb_dev_global_regs structure defines the size
++        and relative field offsets for the Device Global registers.
++        These registers are visible only in Device mode and must not be
++        accessed in Host mode, as the results are unknown.
++ */
++typedef struct ifxusb_dev_global_regs
++{
++	volatile uint32_t dcfg;                 /*!< 800h Device Configuration Register. */
++	volatile uint32_t dctl;                 /*!< 804h Device Control Register. */
++	volatile uint32_t dsts;                 /*!< 808h Device Status Register (Read Only). */
++	uint32_t unused;
++	volatile uint32_t diepmsk;              /*!< 810h Device IN Endpoint Common Interrupt Mask Register. */
++	volatile uint32_t doepmsk;              /*!< 814h Device OUT Endpoint Common Interrupt Mask Register. */
++	volatile uint32_t daint;                /*!< 818h Device All Endpoints Interrupt Register. */
++	volatile uint32_t daintmsk;             /*!< 81Ch Device All Endpoints Interrupt Mask Register. */
++	volatile uint32_t dtknqr1;              /*!< 820h Device IN Token Queue Read Register-1 (Read Only). */
++	volatile uint32_t dtknqr2;              /*!< 824h Device IN Token Queue Read Register-2 (Read Only). */
++	volatile uint32_t dvbusdis;             /*!< 828h Device VBUS discharge Register.*/
++	volatile uint32_t dvbuspulse;           /*!< 82Ch Device VBUS Pulse Register. */
++	volatile uint32_t dtknqr3_dthrctl;      /*!< 830h Device IN Token Queue Read Register-3 (Read Only).
++	                                                 Device Thresholding control register (Read/Write)
++	                                         */
++	volatile uint32_t dtknqr4_fifoemptymsk; /*!< 834h Device IN Token Queue Read Register-4 (Read Only).
++	 	                                             Device IN EPs empty Inr. Mask Register (Read/Write)
++	                                         */
++} ifxusb_device_global_regs_t;
++
++/*!
++  \brief Bit fields in the Device Configuration Register.
++ */
++
++typedef union dcfg_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned reserved31_26   : 6;
++		unsigned perschintvl     : 2; /*!< 25-24 Periodic Scheduling Interval */
++		unsigned descdma         : 1; /*!< 23    Enable Descriptor DMA in Device mode */
++		unsigned epmscnt         : 5; /*!< 22-18 In Endpoint Mis-match count */
++		unsigned reserved13_17   : 5;
++		unsigned perfrint        : 2; /*!< 12-11 Periodic Frame Interval */
++			#define IFXUSB_DCFG_FRAME_INTERVAL_80 0
++			#define IFXUSB_DCFG_FRAME_INTERVAL_85 1
++			#define IFXUSB_DCFG_FRAME_INTERVAL_90 2
++			#define IFXUSB_DCFG_FRAME_INTERVAL_95 3
++		unsigned devaddr         : 7; /*!< 10-04 Device Addresses */
++		unsigned reserved3       : 1;
++		unsigned nzstsouthshk    : 1; /*!< 02    Non Zero Length Status OUT Handshake */
++			#define IFXUSB_DCFG_SEND_STALL 1
++		unsigned devspd          : 2; /*!< 01-00 Device Speed */
++	} b;
++} dcfg_data_t;
++
++/*!
++  \brief Bit fields in the Device Control Register.
++ */
++typedef union dctl_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned reserved16_31  :16;
++		unsigned ifrmnum        : 1; /*!< 15    Ignore Frame Number for ISOC EPs */
++		unsigned gmc            : 2; /*!< 14-13 Global Multi Count */
++		unsigned gcontbna       : 1; /*!< 12    Global Continue on BNA */
++		unsigned pwronprgdone   : 1; /*!< 11    Power-On Programming Done */
++		unsigned cgoutnak       : 1; /*!< 10    Clear Global OUT NAK */
++		unsigned sgoutnak       : 1; /*!< 09    Set Global OUT NAK */
++		unsigned cgnpinnak      : 1; /*!< 08    Clear Global Non-Periodic IN NAK */
++		unsigned sgnpinnak      : 1; /*!< 07    Set Global Non-Periodic IN NAK */
++		unsigned tstctl         : 3; /*!< 06-04 Test Control */
++		unsigned goutnaksts     : 1; /*!< 03    Global OUT NAK Status */
++		unsigned gnpinnaksts    : 1; /*!< 02    Global Non-Periodic IN NAK Status */
++		unsigned sftdiscon      : 1; /*!< 01    Soft Disconnect */
++		unsigned rmtwkupsig     : 1; /*!< 00    Remote Wakeup */
++	} b;
++} dctl_data_t;
++
++
++/*!
++  \brief Bit fields in the Device Status Register.
++ */
++typedef union dsts_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned reserved22_31  :10;
++		unsigned soffn          :14; /*!< 21-08 Frame or Microframe Number of the received SOF */
++		unsigned reserved4_7    : 4;
++		unsigned errticerr      : 1; /*!< 03    Erratic Error */
++		unsigned enumspd        : 2; /*!< 02-01 Enumerated Speed */
++			#define IFXUSB_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0
++			#define IFXUSB_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1
++			#define IFXUSB_DSTS_ENUMSPD_LS_PHY_6MHZ           2
++			#define IFXUSB_DSTS_ENUMSPD_FS_PHY_48MHZ          3
++		unsigned suspsts        : 1; /*!< 00    Suspend Status */
++	} b;
++} dsts_data_t;
++
++/*!
++  \brief Bit fields in the Device IN EP Interrupt Register
++         and the Device IN EP Common Mask Register.
++ */
++typedef union diepint_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned reserved14_31   :18;
++		unsigned nakmsk          : 1; /*!< 13 NAK interrupt Mask */
++		unsigned reserved10_12   : 3;
++		unsigned bna             : 1; /*!< 09 BNA Interrupt mask */
++		unsigned txfifoundrn     : 1; /*!< 08 Fifo Underrun Mask */
++		unsigned emptyintr       : 1; /*!< 07 IN Endpoint HAK Effective mask */
++		unsigned inepnakeff      : 1; /*!< 06 IN Endpoint HAK Effective mask */
++		unsigned intknepmis      : 1; /*!< 05 IN Token Received with EP mismatch mask */
++		unsigned intktxfemp      : 1; /*!< 04 IN Token received with TxF Empty mask */
++		unsigned timeout         : 1; /*!< 03 TimeOUT Handshake mask (non-ISOC EPs) */
++		unsigned ahberr          : 1; /*!< 02 AHB Error mask */
++		unsigned epdisabled      : 1; /*!< 01 Endpoint disable mask */
++		unsigned xfercompl       : 1; /*!< 00 Transfer complete mask */
++	} b;
++} diepint_data_t;
++
++
++/*!
++  \brief Bit fields in the Device OUT EP Interrupt Register and
++         Device OUT EP Common Interrupt Mask Register.
++  */
++typedef union doepint_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned reserved15_31  :17;
++		unsigned nyetmsk        : 1; /*!< 14 NYET Interrupt */
++		unsigned nakmsk         : 1; /*!< 13 NAK Interrupt */
++		unsigned bbleerrmsk     : 1; /*!< 12 Babble Interrupt */
++		unsigned reserved10_11  : 2;
++		unsigned bna            : 1; /*!< 09 BNA Interrupt */
++		unsigned outpkterr      : 1; /*!< 08 OUT packet Error */
++		unsigned reserved07     : 1;
++		unsigned back2backsetup : 1; /*!< 06 Back-to-Back SETUP Packets Received */
++		unsigned stsphsercvd    : 1; /*!< 05 */
++		unsigned outtknepdis    : 1; /*!< 04 OUT Token Received when Endpoint Disabled */
++		unsigned setup          : 1; /*!< 03 Setup Phase Done (contorl EPs) */
++		unsigned ahberr         : 1; /*!< 02 AHB Error */
++		unsigned epdisabled     : 1; /*!< 01 Endpoint disable */
++		unsigned xfercompl      : 1; /*!< 00 Transfer complete */
++	} b;
++} doepint_data_t;
++
++
++/*!
++  \brief Bit fields in the Device All EP Interrupt Registers.
++ */
++typedef union daint_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned out : 16; /*!< 31-16 OUT Endpoint bits */
++		unsigned in  : 16; /*!< 15-00 IN Endpoint bits */
++	} eps;
++	struct
++	{
++		/** OUT Endpoint bits */
++		unsigned outep15 : 1;
++		unsigned outep14 : 1;
++		unsigned outep13 : 1;
++		unsigned outep12 : 1;
++		unsigned outep11 : 1;
++		unsigned outep10 : 1;
++		unsigned outep09 : 1;
++		unsigned outep08 : 1;
++		unsigned outep07 : 1;
++		unsigned outep06 : 1;
++		unsigned outep05 : 1;
++		unsigned outep04 : 1;
++		unsigned outep03 : 1;
++		unsigned outep02 : 1;
++		unsigned outep01 : 1;
++		unsigned outep00 : 1;
++		/** IN Endpoint bits */
++		unsigned inep15 : 1;
++		unsigned inep14 : 1;
++		unsigned inep13 : 1;
++		unsigned inep12 : 1;
++		unsigned inep11 : 1;
++		unsigned inep10 : 1;
++		unsigned inep09 : 1;
++		unsigned inep08 : 1;
++		unsigned inep07 : 1;
++		unsigned inep06 : 1;
++		unsigned inep05 : 1;
++		unsigned inep04 : 1;
++		unsigned inep03 : 1;
++		unsigned inep02 : 1;
++		unsigned inep01 : 1;
++		unsigned inep00 : 1;
++	} ep;
++} daint_data_t;
++
++
++/*!
++  \brief Bit fields in the Device IN Token Queue Read Registers.
++ */
++typedef union dtknq1_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned epnums0_5     :24; /*!< 31-08 EP Numbers of IN Tokens 0 ... 4 */
++		unsigned wrap_bit      : 1; /*!< 07    write pointer has wrapped */
++		unsigned reserved05_06 : 2;
++		unsigned intknwptr     : 5; /*!< 04-00 In Token Queue Write Pointer */
++	}b;
++} dtknq1_data_t;
++
++
++/*!
++  \brief Bit fields in Threshold control Register
++ */
++typedef union dthrctl_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned reserved26_31  : 6;
++		unsigned rx_thr_len     : 9; /*!< 25-17 Rx Thr. Length */
++		unsigned rx_thr_en      : 1; /*!< 16    Rx Thr. Enable */
++		unsigned reserved11_15  : 5;
++		unsigned tx_thr_len     : 9; /*!< 10-02 Tx Thr. Length */
++		unsigned iso_thr_en     : 1; /*!< 01    ISO Tx Thr. Enable */
++		unsigned non_iso_thr_en : 1; /*!< 00    non ISO Tx Thr. Enable */
++	} b;
++} dthrctl_data_t;
++
++/*@}*//*IFXUSB_CSR_DEVICE_GLOBAL_REG*/
++
++/****************************************************************************/
++
++/*!
++  \addtogroup IFXUSB_CSR_DEVICE_EP_REG
++ */
++/*@{*/
++
++/*!
++  \struct ifxusb_dev_in_ep_regs
++  \brief Device Logical IN Endpoint-Specific Registers.
++   There will be one set of endpoint registers per logical endpoint
++   implemented.
++   each EP's IN EP Register are offset at :
++	       900h + * (ep_num * 20h)
++ */
++
++typedef struct ifxusb_dev_in_ep_regs
++{
++	volatile uint32_t diepctl;    /*!< 00h: Endpoint Control Register */
++	uint32_t reserved04;          /*!< 04h: */
++	volatile uint32_t diepint;    /*!< 08h: Endpoint Interrupt Register */
++	uint32_t reserved0C;          /*!< 0Ch: */
++	volatile uint32_t dieptsiz;   /*!< 10h: Endpoint Transfer Size Register.*/
++	volatile uint32_t diepdma;    /*!< 14h: Endpoint DMA Address Register. */
++	volatile uint32_t dtxfsts;    /*!< 18h: Endpoint Transmit FIFO Status Register. */
++	volatile uint32_t diepdmab;   /*!< 1Ch: Endpoint DMA Buffer Register. */
++} ifxusb_dev_in_ep_regs_t;
++
++/*!
++  \brief Device Logical OUT Endpoint-Specific Registers.
++   There will be one set of endpoint registers per logical endpoint
++   implemented.
++   each EP's OUT EP Register are offset at :
++	       B00h + * (ep_num * 20h) + 00h
++ */
++typedef struct ifxusb_dev_out_ep_regs
++{
++	volatile uint32_t doepctl;    /*!< 00h: Endpoint Control Register */
++	volatile uint32_t doepfn;     /*!< 04h: Endpoint Frame number Register */
++	volatile uint32_t doepint;    /*!< 08h: Endpoint Interrupt Register */
++	uint32_t reserved0C;          /*!< 0Ch: */
++	volatile uint32_t doeptsiz;   /*!< 10h: Endpoint Transfer Size Register.*/
++	volatile uint32_t doepdma;    /*!< 14h: Endpoint DMA Address Register. */
++	uint32_t reserved18;          /*!< 18h: */
++	volatile uint32_t doepdmab;   /*!< 1Ch: Endpoint DMA Buffer Register. */
++} ifxusb_dev_out_ep_regs_t;
++
++
++/*!
++  \brief Bit fields in the Device EP Control
++  Register.
++ */
++typedef union depctl_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned epena     : 1; /*!< 31    Endpoint Enable */
++		unsigned epdis     : 1; /*!< 30    Endpoint Disable */
++		unsigned setd1pid  : 1; /*!< 29    Set DATA1 PID (INTR/Bulk IN and OUT endpoints) */
++		unsigned setd0pid  : 1; /*!< 28    Set DATA0 PID (INTR/Bulk IN and OUT endpoints) */
++		unsigned snak      : 1; /*!< 27    Set NAK */
++		unsigned cnak      : 1; /*!< 26    Clear NAK */
++		unsigned txfnum    : 4; /*!< 25-22 Tx Fifo Number */
++		unsigned stall     : 1; /*!< 21    Stall Handshake */
++		unsigned snp       : 1; /*!< 20    Snoop Mode */
++		unsigned eptype    : 2; /*!< 19-18 Endpoint Type
++		                                  0: Control
++		                                  1: Isochronous
++		                                  2: Bulk
++		                                  3: Interrupt
++		                         */
++		unsigned naksts    : 1; /*!< 17    NAK Status */
++		unsigned dpid      : 1; /*!< 16    Endpoint DPID (INTR/Bulk IN and OUT endpoints) */
++		unsigned usbactep  : 1; /*!< 15    USB Active Endpoint */
++		unsigned nextep    : 4; /*!< 14-11 Next Endpoint */
++		unsigned mps       :11; /*!< 10-00 Maximum Packet Size */
++			#define IFXUSB_DEP0CTL_MPS_64   0
++			#define IFXUSB_DEP0CTL_MPS_32   1
++			#define IFXUSB_DEP0CTL_MPS_16   2
++			#define IFXUSB_DEP0CTL_MPS_8    3
++	} b;
++} depctl_data_t;
++
++
++/*!
++  \brief Bit fields in the Device EP Transfer Size Register. (EP0 and EPn)
++ */
++typedef union deptsiz_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned reserved31    : 1;
++		unsigned supcnt        : 2; /*!< 30-29 Setup Packet Count */
++		unsigned reserved20_28 : 9;
++		unsigned pktcnt        : 1; /*!< 19    Packet Count */
++		unsigned reserved7_18  :12;
++		unsigned xfersize      : 7; /*!< 06-00 Transfer size */
++	}b0;
++	struct
++	{
++		unsigned reserved      : 1;
++		unsigned mc            : 2; /*!< 30-29 Multi Count */
++		unsigned pktcnt        :10; /*!< 28-19 Packet Count */
++		unsigned xfersize      :19; /*!< 18-00 Transfer size */
++	} b;
++} deptsiz_data_t;
++
++/*@}*//*IFXUSB_CSR_DEVICE_EP_REG*/
++/****************************************************************************/
++
++/*!
++  \addtogroup IFXUSB_CSR_DEVICE_DMA_DESC
++ */
++/*@{*/
++/*!
++  \struct desc_sts_data
++  \brief Bit fields in the DMA Descriptor status quadlet.
++ */
++typedef union desc_sts_data
++{
++	struct
++	{
++		unsigned bs            : 2; /*!< 31-30 Buffer Status */
++			#define BS_HOST_READY	0x0
++			#define BS_DMA_BUSY		0x1
++			#define BS_DMA_DONE		0x2
++			#define BS_HOST_BUSY	0x3
++		unsigned sts           : 2; /*!< 29-28 Receive/Trasmit Status */
++			#define RTS_SUCCESS		0x0
++			#define RTS_BUFFLUSH	0x1
++			#define RTS_RESERVED	0x2
++			#define RTS_BUFERR		0x3
++		unsigned l             : 1; /*!< 27    Last */
++		unsigned sp            : 1; /*!< 26    Short Packet */
++		unsigned ioc           : 1; /*!< 25    Interrupt On Complete */
++		unsigned sr            : 1; /*!< 24    Setup Packet received */
++		unsigned mtrf          : 1; /*!< 23    Multiple Transfer */
++		unsigned reserved16_22 : 7;
++		unsigned bytes         :16; /*!< 15-00 Transfer size in bytes */
++	} b;
++	uint32_t d32;    /*!< DMA Descriptor data buffer pointer */
++} desc_sts_data_t;
++
++/*@}*//*IFXUSB_CSR_DEVICE_DMA_DESC*/
++/****************************************************************************/
++
++/*!
++  \addtogroup IFXUSB_CSR_HOST_GLOBAL_REG
++ */
++/*@{*/
++/*!
++ \struct ifxusb_host_global_regs
++ \brief IFXUSB Host Mode Global registers. Offsets 400h-7FFh
++        The ifxusb_host_global_regs structure defines the size
++        and relative field offsets for the Host Global registers.
++        These registers are visible only in Host mode and must not be
++        accessed in Device mode, as the results are unknown.
++ */
++typedef struct ifxusb_host_global_regs
++{
++	volatile uint32_t hcfg;      /*!< 400h Host Configuration Register. */
++	volatile uint32_t hfir;      /*!< 404h Host Frame Interval Register. */
++	volatile uint32_t hfnum;     /*!< 408h Host Frame Number / Frame Remaining Register. */
++	uint32_t reserved40C;
++	volatile uint32_t hptxsts;   /*!< 410h Host Periodic Transmit FIFO/ Queue Status Register. */
++	volatile uint32_t haint;     /*!< 414h Host All Channels Interrupt Register. */
++	volatile uint32_t haintmsk;  /*!< 418h Host All Channels Interrupt Mask Register. */
++} ifxusb_host_global_regs_t;
++
++/*!
++  \brief Bit fields in the Host Configuration Register.
++ */
++typedef union hcfg_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned reserved31_03 :29;
++		unsigned fslssupp      : 1; /*!< 02    FS/LS Only Support */
++		unsigned fslspclksel   : 2; /*!< 01-00 FS/LS Phy Clock Select */
++			#define IFXUSB_HCFG_30_60_MHZ 0
++			#define IFXUSB_HCFG_48_MHZ    1
++			#define IFXUSB_HCFG_6_MHZ     2
++	} b;
++} hcfg_data_t;
++
++/*!
++  \brief Bit fields in the Host Frame Interval Register.
++ */
++typedef union hfir_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned reserved : 16;
++		unsigned frint    : 16; /*!< 15-00 Frame Interval */
++	} b;
++} hfir_data_t;
++
++/*!
++ \brief Bit fields in the Host Frame Time Remaing/Number Register.
++ */
++typedef union hfnum_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned frrem : 16; /*!< 31-16 Frame Time Remaining */
++		unsigned frnum : 16; /*!< 15-00 Frame Number*/
++			#define IFXUSB_HFNUM_MAX_FRNUM 0x3FFF
++	} b;
++} hfnum_data_t;
++
++/*!
++  \brief Bit fields in the Host Periodic Transmit FIFO/Queue Status Register
++ */
++typedef union hptxsts_data
++{
++	/** raw register data */
++	uint32_t d32;
++	struct
++	{
++		/** Top of the Periodic Transmit Request Queue
++		 *  - bit 24 - Terminate (last entry for the selected channel)
++		 */
++		unsigned ptxqtop_odd       : 1; /*!< 31    Top of the Periodic Transmit Request
++		                                          Queue Odd/even microframe*/
++		unsigned ptxqtop_chnum     : 4; /*!< 30-27 Top of the Periodic Transmit Request
++		                                          Channel Number */
++		unsigned ptxqtop_token     : 2; /*!< 26-25 Top of the Periodic Transmit Request
++		                                          Token Type
++		                                          0 - Zero length
++		                                          1 - Ping
++		                                          2 - Disable
++		                                 */
++		unsigned ptxqtop_terminate : 1; /*!< 24    Top of the Periodic Transmit Request
++		                                          Terminate (last entry for the selected channel)*/
++		unsigned ptxqspcavail      : 8; /*!< 23-16 Periodic Transmit Request Queue Space Available */
++		unsigned ptxfspcavail      :16; /*!< 15-00 Periodic Transmit Data FIFO Space Available */
++	} b;
++} hptxsts_data_t;
++
++/*!
++  \brief Bit fields in the Host Port Control and Status Register.
++ */
++typedef union hprt0_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned reserved19_31   :13;
++		unsigned prtspd          : 2; /*!< 18-17 Port Speed */
++			#define IFXUSB_HPRT0_PRTSPD_HIGH_SPEED 0
++			#define IFXUSB_HPRT0_PRTSPD_FULL_SPEED 1
++			#define IFXUSB_HPRT0_PRTSPD_LOW_SPEED  2
++		unsigned prttstctl       : 4; /*!< 16-13 Port Test Control */
++		unsigned prtpwr          : 1; /*!< 12    Port Power */
++		unsigned prtlnsts        : 2; /*!< 11-10 Port Line Status */
++		unsigned reserved9       : 1;
++		unsigned prtrst          : 1; /*!< 08    Port Reset */
++		unsigned prtsusp         : 1; /*!< 07    Port Suspend */
++		unsigned prtres          : 1; /*!< 06    Port Resume */
++		unsigned prtovrcurrchng  : 1; /*!< 05    Port Overcurrent Change */
++		unsigned prtovrcurract   : 1; /*!< 04    Port Overcurrent Active */
++		unsigned prtenchng       : 1; /*!< 03    Port Enable/Disable Change */
++		unsigned prtena          : 1; /*!< 02    Port Enable */
++		unsigned prtconndet      : 1; /*!< 01    Port Connect Detected */
++		unsigned prtconnsts      : 1; /*!< 00    Port Connect Status */
++	}b;
++} hprt0_data_t;
++
++/*!
++  \brief Bit fields in the Host All Interrupt Register.
++ */
++typedef union haint_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned reserved : 16;
++		unsigned ch15 : 1;
++		unsigned ch14 : 1;
++		unsigned ch13 : 1;
++		unsigned ch12 : 1;
++		unsigned ch11 : 1;
++		unsigned ch10 : 1;
++		unsigned ch09 : 1;
++		unsigned ch08 : 1;
++		unsigned ch07 : 1;
++		unsigned ch06 : 1;
++		unsigned ch05 : 1;
++		unsigned ch04 : 1;
++		unsigned ch03 : 1;
++		unsigned ch02 : 1;
++		unsigned ch01 : 1;
++		unsigned ch00 : 1;
++	} b;
++	struct
++	{
++		unsigned reserved : 16;
++		unsigned chint    : 16;
++	} b2;
++} haint_data_t;
++/*@}*//*IFXUSB_CSR_HOST_GLOBAL_REG*/
++/****************************************************************************/
++/*!
++  \addtogroup IFXUSB_CSR_HOST_HC_REG
++ */
++/*@{*/
++/*!
++  \brief Host Channel Specific Registers
++   There will be one set of hc registers per host channelimplemented.
++   each HC's Register are offset at :
++	       500h + * (hc_num * 20h)
++ */
++typedef struct ifxusb_hc_regs
++{
++	volatile uint32_t hcchar;   /*!< 00h Host Channel Characteristic Register.*/
++	volatile uint32_t hcsplt;   /*!< 04h Host Channel Split Control Register.*/
++	volatile uint32_t hcint;    /*!< 08h Host Channel Interrupt Register. */
++	volatile uint32_t hcintmsk; /*!< 0Ch Host Channel Interrupt Mask Register. */
++	volatile uint32_t hctsiz;   /*!< 10h Host Channel Transfer Size Register. */
++	volatile uint32_t hcdma;    /*!< 14h Host Channel DMA Address Register. */
++	uint32_t reserved[2];       /*!< 18h Reserved.   */
++} ifxusb_hc_regs_t;
++
++
++/*!
++  \brief Bit fields in the Host Channel Characteristics Register.
++ */
++typedef union hcchar_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned chen      : 1; /*!< 31    Channel enable */
++		unsigned chdis     : 1; /*!< 30    Channel disable */
++		unsigned oddfrm    : 1; /*!< 29    Frame to transmit periodic transaction */
++		unsigned devaddr   : 7; /*!< 28-22 Device address */
++		unsigned multicnt  : 2; /*!< 21-20 Packets per frame for periodic transfers */
++		unsigned eptype    : 2; /*!< 19-18 0: Control, 1: Isoc, 2: Bulk, 3: Intr */
++		unsigned lspddev   : 1; /*!< 17    0: Full/high speed device, 1: Low speed device */
++		unsigned reserved  : 1;
++		unsigned epdir     : 1; /*!< 15    0: OUT, 1: IN */
++		unsigned epnum     : 4; /*!< 14-11 Endpoint number */
++		unsigned mps       :11; /*!< 10-00 Maximum packet size in bytes */
++	} b;
++} hcchar_data_t;
++
++/*!
++  \brief Bit fields in the Host Channel Split Control Register
++ */
++typedef union hcsplt_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned spltena  : 1; /*!< 31    Split Enble */
++		unsigned reserved :14;
++		unsigned compsplt : 1; /*!< 16    Do Complete Split */
++		unsigned xactpos  : 2; /*!< 15-14 Transaction Position */
++			#define IFXUSB_HCSPLIT_XACTPOS_MID 0
++			#define IFXUSB_HCSPLIT_XACTPOS_END 1
++			#define IFXUSB_HCSPLIT_XACTPOS_BEGIN 2
++			#define IFXUSB_HCSPLIT_XACTPOS_ALL 3
++		unsigned hubaddr  : 7; /*!< 13-07 Hub Address */
++		unsigned prtaddr  : 7; /*!< 06-00 Port Address */
++	} b;
++} hcsplt_data_t;
++
++/*!
++  \brief Bit fields in the Host Interrupt Register.
++ */
++typedef union hcint_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned reserved   :21;
++		unsigned datatglerr : 1; /*!< 10 Data Toggle Error */
++		unsigned frmovrun   : 1; /*!< 09 Frame Overrun */
++		unsigned bblerr     : 1; /*!< 08 Babble Error */
++		unsigned xacterr    : 1; /*!< 07 Transaction Err */
++		unsigned nyet       : 1; /*!< 06 NYET Response Received */
++		unsigned ack        : 1; /*!< 05 ACK Response Received */
++		unsigned nak        : 1; /*!< 04 NAK Response Received */
++		unsigned stall      : 1; /*!< 03 STALL Response Received */
++		unsigned ahberr     : 1; /*!< 02 AHB Error */
++		unsigned chhltd     : 1; /*!< 01 Channel Halted */
++		unsigned xfercomp   : 1; /*!< 00 Channel Halted */
++	}b;
++} hcint_data_t;
++
++
++/*!
++ \brief Bit fields in the Host Channel Transfer Size
++  Register.
++ */
++typedef union hctsiz_data
++{
++	uint32_t d32;
++	struct
++	{
++		/** */
++		unsigned dopng     : 1; /*!< 31    Do PING protocol when 1  */
++		/**
++		 * Packet ID for next data packet
++		 * 0: DATA0
++		 * 1: DATA2
++		 * 2: DATA1
++		 * 3: MDATA (non-Control), SETUP (Control)
++		 */
++		unsigned pid       : 2; /*!< 30-29 Packet ID for next data packet
++		                                  0: DATA0
++		                                  1: DATA2
++		                                  2: DATA1
++		                                  3: MDATA (non-Control), SETUP (Control)
++		                         */
++			#define IFXUSB_HCTSIZ_DATA0 0
++			#define IFXUSB_HCTSIZ_DATA1 2
++			#define IFXUSB_HCTSIZ_DATA2 1
++			#define IFXUSB_HCTSIZ_MDATA 3
++			#define IFXUSB_HCTSIZ_SETUP 3
++		unsigned pktcnt    :10; /*!< 28-19 Data packets to transfer */
++		unsigned xfersize  :19; /*!< 18-00 Total transfer size in bytes */
++	}b;
++} hctsiz_data_t;
++
++/*@}*//*IFXUSB_CSR_HOST_HC_REG*/
++
++/****************************************************************************/
++
++/*!
++  \addtogroup IFXUSB_CSR_PWR_CLK_GATING_REG
++ */
++/*@{*/
++/*!
++  \brief Bit fields in the Power and Clock Gating Control Register
++ */
++typedef union pcgcctl_data
++{
++	uint32_t d32;
++	struct
++	{
++		unsigned reserved      : 27;
++		unsigned physuspended  : 1; /*!< 04 PHY Suspended */
++		unsigned rstpdwnmodule : 1; /*!< 03 Reset Power Down Modules */
++		unsigned pwrclmp       : 1; /*!< 02 Power Clamp */
++		unsigned gatehclk      : 1; /*!< 01 Gate Hclk */
++		unsigned stoppclk      : 1; /*!< 00 Stop Pclk */
++	} b;
++} pcgcctl_data_t;
++/*@}*//*IFXUSB_CSR_PWR_CLK_GATING_REG*/
++
++/****************************************************************************/
++
++#endif //__IFXUSB_REGS_H__
+diff --git a/drivers/usb/ifxhcd/ifxusb_version.h b/drivers/usb/ifxhcd/ifxusb_version.h
+new file mode 100644
+index 0000000..2dff735
+--- /dev/null
++++ b/drivers/usb/ifxhcd/ifxusb_version.h
+@@ -0,0 +1,5 @@
++
++#ifndef IFXUSB_VERSION
++#define IFXUSB_VERSION "3.0alpha B100312"
++#endif
++
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0047-MIPS-adds-gptu-driver.patch b/target/linux/lantiq/patches-3.3/0047-MIPS-adds-gptu-driver.patch
new file mode 100644
index 0000000000..3258456db8
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0047-MIPS-adds-gptu-driver.patch
@@ -0,0 +1,195 @@
+From 4dd444aa83346f37a2efcb10a2e3c83db2bf4ca5 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 14 Mar 2012 15:37:19 +0100
+Subject: [PATCH 47/70] MIPS: adds gptu driver
+
+---
+ arch/mips/lantiq/xway/gptu.c |  176 ++++++++++++++++++++++++++++++++++++++++++
+ 1 files changed, 176 insertions(+), 0 deletions(-)
+ create mode 100644 arch/mips/lantiq/xway/gptu.c
+
+diff --git a/arch/mips/lantiq/xway/gptu.c b/arch/mips/lantiq/xway/gptu.c
+new file mode 100644
+index 0000000..ac82c37
+--- /dev/null
++++ b/arch/mips/lantiq/xway/gptu.c
+@@ -0,0 +1,176 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2012 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/ioport.h>
++#include <linux/pm.h>
++#include <linux/export.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <asm/reboot.h>
++
++#include <lantiq_soc.h>
++#include "../clk.h"
++
++#include "../devices.h"
++
++#define ltq_gptu_w32(x, y)	ltq_w32((x), ltq_gptu_membase + (y))
++#define ltq_gptu_r32(x)		ltq_r32(ltq_gptu_membase + (x))
++
++
++/* the magic ID byte of the core */
++#define GPTU_MAGIC	0x59
++/* clock control register */
++#define GPTU_CLC	0x00
++/* id register */
++#define GPTU_ID		0x08
++/* interrupt node enable */
++#define GPTU_IRNEN	0xf4
++/* interrupt control register */
++#define GPTU_IRCR	0xf8
++/* interrupt capture register */
++#define GPTU_IRNCR	0xfc
++/* there are 3 identical blocks of 2 timers. calculate register offsets */
++#define GPTU_SHIFT(x)	(x % 2 ? 4 : 0)
++#define GPTU_BASE(x)	(((x >> 1) * 0x20) + 0x10)
++/* timer control register */
++#define GPTU_CON(x)	(GPTU_BASE(x) + GPTU_SHIFT(x) + 0x00)
++/* timer auto reload register */
++#define GPTU_RUN(x)	(GPTU_BASE(x) + GPTU_SHIFT(x) + 0x08)
++/* timer manual reload register */
++#define GPTU_RLD(x)	(GPTU_BASE(x) + GPTU_SHIFT(x) + 0x10)
++/* timer count register */
++#define GPTU_CNT(x)	(GPTU_BASE(x) + GPTU_SHIFT(x) + 0x18)
++
++/* GPTU_CON(x) */
++#define CON_CNT		BIT(2)
++#define CON_EDGE_FALL	BIT(7)
++#define CON_SYNC	BIT(8)
++#define CON_CLK_INT	BIT(10)
++
++/* GPTU_RUN(x) */
++#define RUN_SEN		BIT(0)
++#define RUN_RL		BIT(2)
++
++/* set clock to runmode */
++#define CLC_RMC		BIT(8)
++/* bring core out of suspend */
++#define CLC_SUSPEND	BIT(4)
++/* the disable bit */
++#define CLC_DISABLE	BIT(0)
++
++#define TIMER_INTERRUPT	(INT_NUM_IM3_IRL0 + 22)
++
++enum gptu_timer {
++	TIMER1A = 0,
++	TIMER1B,
++	TIMER2A,
++	TIMER2B,
++	TIMER3A,
++	TIMER3B
++};
++
++static struct resource ltq_gptu_resource =
++	MEM_RES("GPTU", LTQ_GPTU_BASE_ADDR, LTQ_GPTU_SIZE);
++
++static void __iomem *ltq_gptu_membase;
++
++static irqreturn_t timer_irq_handler(int irq, void *priv)
++{
++	int timer = irq - TIMER_INTERRUPT;
++	ltq_gptu_w32(1 << timer, GPTU_IRNCR);
++	return IRQ_HANDLED;
++}
++
++static void gptu_hwinit(void)
++{
++	struct clk *clk = clk_get_sys("ltq_gptu", NULL);
++	clk_enable(clk);
++	ltq_gptu_w32(0x00, GPTU_IRNEN);
++	ltq_gptu_w32(0xff, GPTU_IRNCR);
++	ltq_gptu_w32(CLC_RMC | CLC_SUSPEND, GPTU_CLC);
++}
++
++static void gptu_hwexit(void)
++{
++	ltq_gptu_w32(0x00, GPTU_IRNEN);
++	ltq_gptu_w32(0xff, GPTU_IRNCR);
++	ltq_gptu_w32(CLC_DISABLE, GPTU_CLC);
++}
++
++static int ltq_gptu_enable(struct clk *clk)
++{
++	int ret = request_irq(TIMER_INTERRUPT + clk->bits, timer_irq_handler,
++		IRQF_TIMER, "timer", NULL);
++	if (ret) {
++		pr_err("gptu: failed to request irq\n");
++		return ret;
++	}
++
++        ltq_gptu_w32(CON_CNT | CON_EDGE_FALL | CON_SYNC | CON_CLK_INT,
++		GPTU_CON(clk->bits));
++	ltq_gptu_w32(1, GPTU_RLD(clk->bits));
++	ltq_gptu_w32(ltq_gptu_r32(GPTU_IRNEN) | clk->bits, GPTU_IRNEN);
++	ltq_gptu_w32(RUN_SEN | RUN_RL, GPTU_RUN(clk->bits));
++	return 0;
++}
++
++static void ltq_gptu_disable(struct clk *clk)
++{
++	ltq_gptu_w32(0, GPTU_RUN(clk->bits));
++	ltq_gptu_w32(0,	GPTU_CON(clk->bits));
++	ltq_gptu_w32(0, GPTU_RLD(clk->bits));
++	ltq_gptu_w32(ltq_gptu_r32(GPTU_IRNEN) & ~clk->bits, GPTU_IRNEN);
++	free_irq(TIMER_INTERRUPT + clk->bits, NULL);
++}
++
++static inline void clkdev_add_gptu(const char *con, unsigned int timer)
++{
++	struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
++
++	clk->cl.dev_id = "ltq_gptu";
++	clk->cl.con_id = con;
++	clk->cl.clk = clk;
++	clk->enable = ltq_gptu_enable;
++	clk->disable = ltq_gptu_disable;
++	clk->bits = timer;
++	clkdev_add(&clk->cl);
++}
++
++static int __init gptu_setup(void)
++{
++	/* remap gptu register range */
++	ltq_gptu_membase = ltq_remap_resource(&ltq_gptu_resource);
++	if (!ltq_gptu_membase)
++		panic("Failed to remap gptu memory");
++
++	/* power up the core */
++	gptu_hwinit();
++
++	/* the gptu has a ID register */
++	if (((ltq_gptu_r32(GPTU_ID) >> 8) & 0xff) != GPTU_MAGIC) {
++		pr_err("gptu: failed to find magic\n");
++		gptu_hwexit();
++		return -ENAVAIL;
++	}
++
++	/* register the clocks */
++	clkdev_add_gptu("timer1a", TIMER1A);
++	clkdev_add_gptu("timer1b", TIMER1B);
++	clkdev_add_gptu("timer2a", TIMER2A);
++	clkdev_add_gptu("timer2b", TIMER2B);
++	clkdev_add_gptu("timer3a", TIMER3A);
++	clkdev_add_gptu("timer3b", TIMER3B);
++
++	pr_info("gptu: 6 timers loaded\n");
++
++	return 0;
++}
++
++arch_initcall(gptu_setup);
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0048-MIPS-lantiq-pci-rename-variable-inside.patch b/target/linux/lantiq/patches-3.3/0048-MIPS-lantiq-pci-rename-variable-inside.patch
new file mode 100644
index 0000000000..b3db0bc5f6
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0048-MIPS-lantiq-pci-rename-variable-inside.patch
@@ -0,0 +1,79 @@
+From 202f1bad2707e843dccc0fb08233692f8c845f90 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 8 Mar 2012 12:00:17 +0100
+Subject: [PATCH 48/70] MIPS: lantiq: pci: rename variable inside
+
+* rename a global var inside the pci code
+---
+ arch/mips/pci/ops-lantiq.c |    6 +++---
+ arch/mips/pci/pci-lantiq.c |    6 +++---
+ arch/mips/pci/pci-lantiq.h |    2 +-
+ 3 files changed, 7 insertions(+), 7 deletions(-)
+
+diff --git a/arch/mips/pci/ops-lantiq.c b/arch/mips/pci/ops-lantiq.c
+index 1f2afb5..5cbb0cf 100644
+--- a/arch/mips/pci/ops-lantiq.c
++++ b/arch/mips/pci/ops-lantiq.c
+@@ -41,7 +41,7 @@ static int ltq_pci_config_access(unsigned char access_type, struct pci_bus *bus,
+ 
+ 	spin_lock_irqsave(&ebu_lock, flags);
+ 
+-	cfg_base = (unsigned long) ltq_pci_mapped_cfg;
++	cfg_base = (unsigned long) ltq_pci_cfgbase;
+ 	cfg_base |= (bus->number << LTQ_PCI_CFG_BUSNUM_SHF) | (devfn <<
+ 			LTQ_PCI_CFG_FUNNUM_SHF) | (where & ~0x3);
+ 
+@@ -55,11 +55,11 @@ static int ltq_pci_config_access(unsigned char access_type, struct pci_bus *bus,
+ 	wmb();
+ 
+ 	/* clean possible Master abort */
+-	cfg_base = (unsigned long) ltq_pci_mapped_cfg;
++	cfg_base = (unsigned long) ltq_pci_cfgbase;
+ 	cfg_base |= (0x0 << LTQ_PCI_CFG_FUNNUM_SHF) + 4;
+ 	temp = ltq_r32(((u32 *)(cfg_base)));
+ 	temp = swab32(temp);
+-	cfg_base = (unsigned long) ltq_pci_mapped_cfg;
++	cfg_base = (unsigned long) ltq_pci_cfgbase;
+ 	cfg_base |= (0x68 << LTQ_PCI_CFG_FUNNUM_SHF) + 4;
+ 	ltq_w32(temp, ((u32 *)cfg_base));
+ 
+diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
+index 47b551c..efcdd45 100644
+--- a/arch/mips/pci/pci-lantiq.c
++++ b/arch/mips/pci/pci-lantiq.c
+@@ -65,8 +65,8 @@
+ #define ltq_pci_w32(x, y)	ltq_w32((x), ltq_pci_membase + (y))
+ #define ltq_pci_r32(x)		ltq_r32(ltq_pci_membase + (x))
+ 
+-#define ltq_pci_cfg_w32(x, y)	ltq_w32((x), ltq_pci_mapped_cfg + (y))
+-#define ltq_pci_cfg_r32(x)	ltq_r32(ltq_pci_mapped_cfg + (x))
++#define ltq_pci_cfg_w32(x, y)	ltq_w32((x), ltq_pci_cfgbase + (y))
++#define ltq_pci_cfg_r32(x)	ltq_r32(ltq_pci_cfgbase + (x))
+ 
+ struct ltq_pci_gpio_map {
+ 	int pin;
+@@ -273,7 +273,7 @@ static int __devinit ltq_pci_probe(struct platform_device *pdev)
+ 	pci_probe_only = 0;
+ 	ltq_pci_irq_map = ltq_pci_data->irq;
+ 	ltq_pci_membase = ioremap_nocache(PCI_CR_BASE_ADDR, PCI_CR_SIZE);
+-	ltq_pci_mapped_cfg =
++	ltq_pci_cfgbase =
+ 		ioremap_nocache(LTQ_PCI_CFG_BASE, LTQ_PCI_CFG_BASE);
+ 	ltq_pci_controller.io_map_base =
+ 		(unsigned long)ioremap(LTQ_PCI_IO_BASE, LTQ_PCI_IO_SIZE - 1);
+diff --git a/arch/mips/pci/pci-lantiq.h b/arch/mips/pci/pci-lantiq.h
+index 66bf6cd..c4721b4 100644
+--- a/arch/mips/pci/pci-lantiq.h
++++ b/arch/mips/pci/pci-lantiq.h
+@@ -9,7 +9,7 @@
+ #ifndef _LTQ_PCI_H__
+ #define _LTQ_PCI_H__
+ 
+-extern __iomem void *ltq_pci_mapped_cfg;
++extern __iomem void *ltq_pci_cfgbase;
+ extern int ltq_pci_read_config_dword(struct pci_bus *bus,
+ 	unsigned int devfn, int where, int size, u32 *val);
+ extern int ltq_pci_write_config_dword(struct pci_bus *bus,
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0049-MIPS-lantiq-pci-give-xway-pci-support-its-own-kbuild.patch b/target/linux/lantiq/patches-3.3/0049-MIPS-lantiq-pci-give-xway-pci-support-its-own-kbuild.patch
new file mode 100644
index 0000000000..5401436b02
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0049-MIPS-lantiq-pci-give-xway-pci-support-its-own-kbuild.patch
@@ -0,0 +1,45 @@
+From e5ae2eed68a7ccd406bde12ecfc12c88a52aeb06 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 8 Mar 2012 13:13:31 +0100
+Subject: [PATCH 49/70] MIPS: lantiq: pci: give xway pci support its own
+ kbuild symbol
+
+---
+ arch/mips/lantiq/Kconfig |    5 +++++
+ arch/mips/pci/Makefile   |    2 +-
+ 2 files changed, 6 insertions(+), 1 deletions(-)
+
+diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
+index cb6b39f..dde9fc6 100644
+--- a/arch/mips/lantiq/Kconfig
++++ b/arch/mips/lantiq/Kconfig
+@@ -19,8 +19,13 @@ config SOC_XWAY
+ 
+ config SOC_FALCON
+ 	bool "FALCON"
++
+ endchoice
+ 
++config PCI_LANTIQ
++	bool "PCI Support"
++	depends on SOC_XWAY && PCI
++
+ source "arch/mips/lantiq/xway/Kconfig"
+ source "arch/mips/lantiq/falcon/Kconfig"
+ 
+diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
+index c3ac4b0..1f07a58 100644
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -41,7 +41,7 @@ obj-$(CONFIG_SIBYTE_SB1250)	+= fixup-sb1250.o pci-sb1250.o
+ obj-$(CONFIG_SIBYTE_BCM112X)	+= fixup-sb1250.o pci-sb1250.o
+ obj-$(CONFIG_SIBYTE_BCM1x80)	+= pci-bcm1480.o pci-bcm1480ht.o
+ obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops-sni.o
+-obj-$(CONFIG_SOC_XWAY)		+= pci-lantiq.o ops-lantiq.o
++obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o ops-lantiq.o
+ obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
+ obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
+ obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0050-MIPS-lantiq-pci-move-pcibios-code-into-fixup-lantiq..patch b/target/linux/lantiq/patches-3.3/0050-MIPS-lantiq-pci-move-pcibios-code-into-fixup-lantiq..patch
new file mode 100644
index 0000000000..08be0c57da
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0050-MIPS-lantiq-pci-move-pcibios-code-into-fixup-lantiq..patch
@@ -0,0 +1,131 @@
+From a4f83d3f635603b982f11e7f1cb22057958ff52b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 8 Mar 2012 15:53:10 +0100
+Subject: [PATCH 50/70] MIPS: lantiq: pci: move pcibios code into
+ fixup-lantiq.c
+
+---
+ arch/mips/pci/Makefile       |    1 +
+ arch/mips/pci/fixup-lantiq.c |   42 ++++++++++++++++++++++++++++++++++++++++++
+ arch/mips/pci/pci-lantiq.c   |   24 ++----------------------
+ 3 files changed, 45 insertions(+), 22 deletions(-)
+ create mode 100644 arch/mips/pci/fixup-lantiq.c
+
+diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
+index 1f07a58..499a019 100644
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_SB1250)	+= fixup-sb1250.o pci-sb1250.o
+ obj-$(CONFIG_SIBYTE_BCM112X)	+= fixup-sb1250.o pci-sb1250.o
+ obj-$(CONFIG_SIBYTE_BCM1x80)	+= pci-bcm1480.o pci-bcm1480ht.o
+ obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops-sni.o
++obj-$(CONFIG_LANTIQ)		+= fixup-lantiq.o
+ obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o ops-lantiq.o
+ obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
+ obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
+diff --git a/arch/mips/pci/fixup-lantiq.c b/arch/mips/pci/fixup-lantiq.c
+new file mode 100644
+index 0000000..daf5ae9
+--- /dev/null
++++ b/arch/mips/pci/fixup-lantiq.c
+@@ -0,0 +1,42 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2012 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/of_irq.h>
++#include <linux/of_pci.h>
++
++int (*ltqpci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin) = NULL;
++int (*ltqpci_plat_arch_init)(struct pci_dev *dev) = NULL;
++int (*ltqpci_plat_dev_init)(struct pci_dev *dev) = NULL;
++int *ltq_pci_irq_map;
++
++int pcibios_plat_dev_init(struct pci_dev *dev)
++{
++	if (ltqpci_plat_arch_init)
++		return ltqpci_plat_arch_init(dev);
++
++	if (ltqpci_plat_dev_init)
++		return ltqpci_plat_dev_init(dev);
++
++	return 0;
++}
++
++int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++	if (ltqpci_map_irq)
++		return ltqpci_map_irq(dev, slot, pin);
++	if (ltq_pci_irq_map[slot]) {
++		dev_info(&dev->dev, "SLOT:%d PIN:%d IRQ:%d\n", slot, pin, ltq_pci_irq_map[slot]);
++		return ltq_pci_irq_map[slot];
++	}
++	printk(KERN_ERR "lq_pci: trying to map irq for unknown slot %d\n",
++		slot);
++
++	return 0;
++}
++
++
+diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
+index efcdd45..7a29738 100644
+--- a/arch/mips/pci/pci-lantiq.c
++++ b/arch/mips/pci/pci-lantiq.c
+@@ -93,16 +93,14 @@ static struct ltq_pci_gpio_map ltq_pci_gpio_map[] = {
+ 	{ 37, 2, 0, "pci-req4" },
+ };
+ 
+-__iomem void *ltq_pci_mapped_cfg;
++__iomem void *ltq_pci_cfgbase;
+ static __iomem void *ltq_pci_membase;
+ 
+-int (*ltqpci_plat_dev_init)(struct pci_dev *dev) = NULL;
+-
+ /* Since the PCI REQ pins can be reused for other functionality, make it
+    possible to exclude those from interpretation by the PCI controller */
+ static int ltq_pci_req_mask = 0xf;
+ 
+-static int *ltq_pci_irq_map;
++extern int *ltq_pci_irq_map;
+ 
+ struct pci_ops ltq_pci_ops = {
+ 	.read	= ltq_pci_read_config_dword,
+@@ -131,14 +129,6 @@ static struct pci_controller ltq_pci_controller = {
+ 	.io_offset	= 0x00000000UL,
+ };
+ 
+-int pcibios_plat_dev_init(struct pci_dev *dev)
+-{
+-	if (ltqpci_plat_dev_init)
+-		return ltqpci_plat_dev_init(dev);
+-
+-	return 0;
+-}
+-
+ static u32 ltq_calc_bar11mask(void)
+ {
+ 	u32 mem, bar11mask;
+@@ -256,16 +246,6 @@ static int __devinit ltq_pci_startup(struct device *dev)
+ 	return 0;
+ }
+ 
+-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+-{
+-	if (ltq_pci_irq_map[slot])
+-		return ltq_pci_irq_map[slot];
+-	printk(KERN_ERR "lq_pci: trying to map irq for unknown slot %d\n",
+-		slot);
+-
+-	return 0;
+-}
+-
+ static int __devinit ltq_pci_probe(struct platform_device *pdev)
+ {
+ 	struct ltq_pci_data *ltq_pci_data =
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0051-MIPS-lantiq-pcie-add-pcie-driver.patch b/target/linux/lantiq/patches-3.3/0051-MIPS-lantiq-pcie-add-pcie-driver.patch
new file mode 100644
index 0000000000..0d5e503a7b
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0051-MIPS-lantiq-pcie-add-pcie-driver.patch
@@ -0,0 +1,3503 @@
+From 5497be6394beeac27c136b254dcdfd0d741289de Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 8 Mar 2012 15:57:33 +0100
+Subject: [PATCH 51/70]  MIPS: lantiq: pcie: add pcie driver
+
+---
+ arch/mips/Kconfig                 |    1 +
+ arch/mips/lantiq/Kconfig          |    4 -
+ arch/mips/lantiq/xway/Kconfig     |   21 +
+ arch/mips/pci/Makefile            |    2 +
+ arch/mips/pci/fixup-lantiq-pcie.c |   81 +++
+ arch/mips/pci/pci.c               |   25 +
+ arch/mips/pci/pcie-lantiq-msi.c   |  399 +++++++++++
+ arch/mips/pci/pcie-lantiq-phy.c   |  408 ++++++++++++
+ arch/mips/pci/pcie-lantiq.c       | 1146 ++++++++++++++++++++++++++++++++
+ arch/mips/pci/pcie-lantiq.h       | 1305 +++++++++++++++++++++++++++++++++++++
+ 10 files changed, 3388 insertions(+), 4 deletions(-)
+ create mode 100644 arch/mips/pci/fixup-lantiq-pcie.c
+ create mode 100644 arch/mips/pci/pcie-lantiq-msi.c
+ create mode 100644 arch/mips/pci/pcie-lantiq-phy.c
+ create mode 100644 arch/mips/pci/pcie-lantiq.c
+ create mode 100644 arch/mips/pci/pcie-lantiq.h
+
+diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
+index df4e125..0dd8ae3 100644
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -2369,6 +2369,7 @@ config PCI_DOMAINS
+ 	bool
+ 
+ source "drivers/pci/Kconfig"
++source "drivers/pci/pcie/Kconfig"
+ 
+ #
+ # ISA support is now enabled via select.  Too many systems still have the one
+diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
+index dde9fc6..d21d9d4 100644
+--- a/arch/mips/lantiq/Kconfig
++++ b/arch/mips/lantiq/Kconfig
+@@ -22,10 +22,6 @@ config SOC_FALCON
+ 
+ endchoice
+ 
+-config PCI_LANTIQ
+-	bool "PCI Support"
+-	depends on SOC_XWAY && PCI
+-
+ source "arch/mips/lantiq/xway/Kconfig"
+ source "arch/mips/lantiq/falcon/Kconfig"
+ 
+diff --git a/arch/mips/lantiq/xway/Kconfig b/arch/mips/lantiq/xway/Kconfig
+index 2b857de..54a51ff 100644
+--- a/arch/mips/lantiq/xway/Kconfig
++++ b/arch/mips/lantiq/xway/Kconfig
+@@ -8,6 +8,27 @@ config LANTIQ_MACH_EASY50712
+ 
+ endmenu
+ 
++choice
++	prompt "PCI"
++	default PCI_LANTIQ_NONE
++
++config PCI_LANTIQ_NONE
++	bool "None"
++
++config PCI_LANTIQ
++	bool "PCI Support"
++	depends on PCI
++
++config PCIE_LANTIQ
++	bool "PCIE Support"
++	select ARCH_SUPPORTS_MSI
++
++endchoice
++
++config PCIE_LANTIQ_MSI
++	bool
++	depends on PCIE_LANTIQ && PCI_MSI
++	default y
+ endif
+ 
+ if SOC_AMAZON_SE
+diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
+index 499a019..31e70c5 100644
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -43,6 +43,8 @@ obj-$(CONFIG_SIBYTE_BCM1x80)	+= pci-bcm1480.o pci-bcm1480ht.o
+ obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops-sni.o
+ obj-$(CONFIG_LANTIQ)		+= fixup-lantiq.o
+ obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o ops-lantiq.o
++obj-$(CONFIG_PCIE_LANTIQ)	+= pcie-lantiq-phy.o pcie-lantiq.o fixup-lantiq-pcie.o
++obj-$(CONFIG_PCIE_LANTIQ_MSI)	+= pcie-lantiq-msi.o
+ obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
+ obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
+ obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o
+diff --git a/arch/mips/pci/fixup-lantiq-pcie.c b/arch/mips/pci/fixup-lantiq-pcie.c
+new file mode 100644
+index 0000000..84517df
+--- /dev/null
++++ b/arch/mips/pci/fixup-lantiq-pcie.c
+@@ -0,0 +1,81 @@
++/******************************************************************************
++**
++** FILE NAME    : ifxmips_fixup_pcie.c
++** PROJECT      : IFX UEIP for VRX200
++** MODULES      : PCIe 
++**
++** DATE         : 02 Mar 2009
++** AUTHOR       : Lei Chuanhua
++** DESCRIPTION  : PCIe Root Complex Driver
++** COPYRIGHT    :       Copyright (c) 2009
++**                      Infineon Technologies AG
++**                      Am Campeon 1-12, 85579 Neubiberg, Germany
++**
++**    This program is free software; you can redistribute it and/or modify
++**    it under the terms of the GNU General Public License as published by
++**    the Free Software Foundation; either version 2 of the License, or
++**    (at your option) any later version.
++** HISTORY
++** $Version $Date        $Author         $Comment
++** 0.0.1    17 Mar,2009  Lei Chuanhua    Initial version
++*******************************************************************************/
++/*!
++ \file ifxmips_fixup_pcie.c
++ \ingroup IFX_PCIE  
++ \brief PCIe Fixup functions source file
++*/
++#include <linux/pci.h>
++#include <linux/pci_regs.h>
++#include <linux/pci_ids.h>
++
++#include <lantiq_soc.h>
++
++#include "pcie-lantiq.h"
++
++#define PCI_VENDOR_ID_INFINEON         0x15D1
++#define PCI_DEVICE_ID_INFINEON_DANUBE  0x000F
++#define PCI_DEVICE_ID_INFINEON_PCIE    0x0011
++#define PCI_VENDOR_ID_LANTIQ        0x1BEF
++#define PCI_DEVICE_ID_LANTIQ_PCIE       0x0011
++
++
++
++static void __devinit
++ifx_pcie_fixup_resource(struct pci_dev *dev)
++{
++    u32 reg;
++
++    IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev));
++
++    IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s: fixup host controller %s (%04x:%04x)\n", 
++        __func__, pci_name(dev), dev->vendor, dev->device); 
++
++   /* Setup COMMAND register */
++    reg = PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER /* | 
++          PCI_COMMAND_INTX_DISABLE */| PCI_COMMAND_SERR;
++    pci_write_config_word(dev, PCI_COMMAND, reg);
++    IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev));
++}
++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE, ifx_pcie_fixup_resource);
++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_VENDOR_ID_LANTIQ, ifx_pcie_fixup_resource);
++
++static void __devinit
++ifx_pcie_rc_class_early_fixup(struct pci_dev *dev)
++{
++    IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev));
++
++    if (dev->devfn == PCI_DEVFN(0, 0) &&
++        (dev->class >> 8) == PCI_CLASS_BRIDGE_HOST) {
++
++        dev->class = (PCI_CLASS_BRIDGE_PCI << 8) | (dev->class & 0xff);
++
++        printk(KERN_INFO "%s: fixed pcie host bridge to pci-pci bridge\n", __func__);
++    }
++    IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev));
++}
++
++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE,
++     ifx_pcie_rc_class_early_fixup);
++
++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_DEVICE_ID_LANTIQ_PCIE,
++     ifx_pcie_rc_class_early_fixup);
+diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
+index 1552150..cd034a9 100644
+--- a/arch/mips/pci/pci.c
++++ b/arch/mips/pci/pci.c
+@@ -201,6 +201,31 @@ static int __init pcibios_init(void)
+ 
+ subsys_initcall(pcibios_init);
+ 
++int pcibios_host_nr(void)
++{
++    int count;
++    struct pci_controller *hose;
++    for (count = 0, hose = hose_head; hose; hose = hose->next, count++) {
++        ;
++    }
++    return count;
++}
++EXPORT_SYMBOL(pcibios_host_nr);
++
++int pcibios_1st_host_bus_nr(void)
++{
++    int bus_nr = 0;
++    struct pci_controller *hose = hose_head;
++
++    if (hose != NULL) {
++        if (hose->bus != NULL) {
++            bus_nr = hose->bus->subordinate + 1;
++        }
++    }
++    return bus_nr;
++}
++EXPORT_SYMBOL(pcibios_1st_host_bus_nr);
++
+ static int pcibios_enable_resources(struct pci_dev *dev, int mask)
+ {
+ 	u16 cmd, old_cmd;
+diff --git a/arch/mips/pci/pcie-lantiq-msi.c b/arch/mips/pci/pcie-lantiq-msi.c
+new file mode 100644
+index 0000000..9cbf639
+--- /dev/null
++++ b/arch/mips/pci/pcie-lantiq-msi.c
+@@ -0,0 +1,399 @@
++/******************************************************************************
++**
++** FILE NAME    : ifxmips_pcie_msi.c
++** PROJECT      : IFX UEIP for VRX200
++** MODULES      : PCI MSI sub module
++**
++** DATE         : 02 Mar 2009
++** AUTHOR       : Lei Chuanhua
++** DESCRIPTION  : PCIe MSI Driver
++** COPYRIGHT    :       Copyright (c) 2009
++**                      Infineon Technologies AG
++**                      Am Campeon 1-12, 85579 Neubiberg, Germany
++**
++**    This program is free software; you can redistribute it and/or modify
++**    it under the terms of the GNU General Public License as published by
++**    the Free Software Foundation; either version 2 of the License, or
++**    (at your option) any later version.
++** HISTORY
++** $Date        $Author         $Comment
++** 02 Mar,2009  Lei Chuanhua    Initial version
++*******************************************************************************/
++/*!
++ \defgroup IFX_PCIE_MSI MSI OS APIs
++ \ingroup IFX_PCIE
++ \brief PCIe bus driver OS interface functions
++*/
++
++/*!
++ \file ifxmips_pcie_msi.c
++ \ingroup IFX_PCIE 
++ \brief PCIe MSI OS interface file
++*/
++
++#include <linux/init.h>
++#include <linux/sched.h>
++#include <linux/slab.h>
++#include <linux/interrupt.h>
++#include <linux/kernel_stat.h>
++#include <linux/pci.h>
++#include <linux/msi.h>
++#include <linux/module.h>
++#include <asm/bootinfo.h>
++#include <asm/irq.h>
++#include <asm/traps.h>
++
++#include "pcie-lantiq.h"
++
++#define IFX_MSI_IRQ_NUM    16
++#define SM(_v, _f)		(((_v) << _f##_S) & (_f))
++
++#define IFX_MSI_PIC_REG_BASE                    (KSEG1 | 0x1F700000)
++#define IFX_PCIE_MSI_IR0                (INT_NUM_IM4_IRL0 + 27)
++#define IFX_PCIE_MSI_IR1                (INT_NUM_IM4_IRL0 + 28)
++#define IFX_PCIE_MSI_IR2                (INT_NUM_IM4_IRL0 + 29)
++#define IFX_PCIE_MSI_IR3                (INT_NUM_IM0_IRL0 + 30)
++
++#define IFX_MSI_PCI_INT_DISABLE                 0x80000000
++#define IFX_MSI_PIC_INT_LINE                    0x30000000
++#define IFX_MSI_PIC_MSG_ADDR                    0x0FFF0000
++#define IFX_MSI_PIC_MSG_DATA                    0x0000FFFF
++#define IFX_MSI_PIC_BIG_ENDIAN                  1
++#define IFX_MSI_PIC_INT_LINE_S                  28
++#define IFX_MSI_PIC_MSG_ADDR_S                  16
++#define IFX_MSI_PIC_MSG_DATA_S                  0x0
++
++enum {
++    IFX_PCIE_MSI_IDX0 = 0,
++    IFX_PCIE_MSI_IDX1,
++    IFX_PCIE_MSI_IDX2,
++    IFX_PCIE_MSI_IDX3,
++};
++
++typedef struct ifx_msi_irq_idx {
++    const int irq;
++    const int idx;
++}ifx_msi_irq_idx_t;
++
++struct ifx_msi_pic {
++    volatile u32  pic_table[IFX_MSI_IRQ_NUM];
++    volatile u32  pic_endian;    /* 0x40  */
++};
++typedef struct ifx_msi_pic *ifx_msi_pic_t;
++
++typedef struct ifx_msi_irq {
++    const volatile ifx_msi_pic_t msi_pic_p;
++    const u32 msi_phy_base;
++    const ifx_msi_irq_idx_t msi_irq_idx[IFX_MSI_IRQ_NUM];
++    /*
++     * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is 
++     * in use.
++     */
++    u16 msi_free_irq_bitmask;
++
++    /*
++     * Each bit in msi_multiple_irq_bitmask tells that the device using 
++     * this bit in msi_free_irq_bitmask is also using the next bit. This 
++     * is used so we can disable all of the MSI interrupts when a device 
++     * uses multiple.
++     */
++    u16 msi_multiple_irq_bitmask;
++}ifx_msi_irq_t;
++
++static ifx_msi_irq_t msi_irqs[IFX_PCIE_CORE_NR] = {
++    {
++        .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI_PIC_REG_BASE,
++        .msi_phy_base = PCIE_MSI_PHY_BASE,
++        .msi_irq_idx = {
++            {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
++            {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
++            {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
++            {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
++            {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
++            {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
++            {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
++            {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
++        },
++        .msi_free_irq_bitmask = 0,
++        .msi_multiple_irq_bitmask= 0,
++    },
++#ifdef CONFIG_IFX_PCIE_2ND_CORE
++    {
++        .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI1_PIC_REG_BASE,
++        .msi_phy_base = PCIE1_MSI_PHY_BASE,
++        .msi_irq_idx = {
++            {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
++            {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
++            {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
++            {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
++            {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
++            {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
++            {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
++            {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
++        },
++        .msi_free_irq_bitmask = 0,
++        .msi_multiple_irq_bitmask= 0,
++
++    },
++#endif /* CONFIG_IFX_PCIE_2ND_CORE */
++};
++
++/* 
++ * This lock controls updates to msi_free_irq_bitmask, 
++ * msi_multiple_irq_bitmask and pic register settting
++ */ 
++static DEFINE_SPINLOCK(ifx_pcie_msi_lock);
++
++void pcie_msi_pic_init(int pcie_port)
++{
++    spin_lock(&ifx_pcie_msi_lock);
++    msi_irqs[pcie_port].msi_pic_p->pic_endian = IFX_MSI_PIC_BIG_ENDIAN;
++    spin_unlock(&ifx_pcie_msi_lock);
++}
++
++/** 
++ * \fn int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
++ * \brief Called when a driver request MSI interrupts instead of the 
++ * legacy INT A-D. This routine will allocate multiple interrupts 
++ * for MSI devices that support them. A device can override this by 
++ * programming the MSI control bits [6:4] before calling 
++ * pci_enable_msi(). 
++ * 
++ * \param[in] pdev   Device requesting MSI interrupts 
++ * \param[in] desc   MSI descriptor 
++ * 
++ * \return   -EINVAL Invalid pcie root port or invalid msi bit
++ * \return    0        OK
++ * \ingroup IFX_PCIE_MSI
++ */
++int 
++arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
++{
++    int  irq, pos;
++    u16  control;
++    int  irq_idx;
++    int  irq_step;
++    int configured_private_bits;
++    int request_private_bits;
++    struct msi_msg msg;
++    u16 search_mask;
++    struct ifx_pci_controller *ctrl = pdev->bus->sysdata;
++    int pcie_port = ctrl->port;
++
++    IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s %s enter\n", __func__, pci_name(pdev));
++
++    /* XXX, skip RC MSI itself */
++    if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) {
++        IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s RC itself doesn't use MSI interrupt\n", __func__);
++        return -EINVAL;
++    }
++
++    /*
++     * Read the MSI config to figure out how many IRQs this device 
++     * wants.  Most devices only want 1, which will give 
++     * configured_private_bits and request_private_bits equal 0. 
++     */
++    pci_read_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, &control);
++
++    /*
++     * If the number of private bits has been configured then use 
++     * that value instead of the requested number. This gives the 
++     * driver the chance to override the number of interrupts 
++     * before calling pci_enable_msi(). 
++     */
++    configured_private_bits = (control & PCI_MSI_FLAGS_QSIZE) >> 4; 
++    if (configured_private_bits == 0) {
++        /* Nothing is configured, so use the hardware requested size */
++        request_private_bits = (control & PCI_MSI_FLAGS_QMASK) >> 1;
++    }
++    else {
++        /*
++         * Use the number of configured bits, assuming the 
++         * driver wanted to override the hardware request 
++         * value.
++         */
++        request_private_bits = configured_private_bits;
++    }
++
++    /*
++     * The PCI 2.3 spec mandates that there are at most 32
++     * interrupts. If this device asks for more, only give it one.
++     */
++    if (request_private_bits > 5) {
++        request_private_bits = 0;
++    }
++again:
++    /*
++     * The IRQs have to be aligned on a power of two based on the
++     * number being requested.
++     */
++    irq_step = (1 << request_private_bits);
++
++    /* Mask with one bit for each IRQ */
++    search_mask = (1 << irq_step) - 1;
++
++    /*
++     * We're going to search msi_free_irq_bitmask_lock for zero 
++     * bits. This represents an MSI interrupt number that isn't in 
++     * use.
++     */
++    spin_lock(&ifx_pcie_msi_lock);
++    for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos += irq_step) {
++        if ((msi_irqs[pcie_port].msi_free_irq_bitmask & (search_mask << pos)) == 0) {
++            msi_irqs[pcie_port].msi_free_irq_bitmask |= search_mask << pos; 
++            msi_irqs[pcie_port].msi_multiple_irq_bitmask |= (search_mask >> 1) << pos;
++            break; 
++        }
++    }
++    spin_unlock(&ifx_pcie_msi_lock); 
++
++    /* Make sure the search for available interrupts didn't fail */ 
++    if (pos >= IFX_MSI_IRQ_NUM) {
++        if (request_private_bits) {
++            IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s: Unable to find %d free "
++                  "interrupts, trying just one", __func__, 1 << request_private_bits);
++            request_private_bits = 0;
++            goto again;
++        }
++        else {
++            printk(KERN_ERR "%s: Unable to find a free MSI interrupt\n", __func__);
++            return -EINVAL;
++        }
++    } 
++    irq = msi_irqs[pcie_port].msi_irq_idx[pos].irq;
++    irq_idx = msi_irqs[pcie_port].msi_irq_idx[pos].idx;
++
++    IFX_PCIE_PRINT(PCIE_MSG_MSI, "pos %d, irq %d irq_idx %d\n", pos, irq, irq_idx);
++
++    /*
++     * Initialize MSI. This has to match the memory-write endianess from the device 
++     * Address bits [23:12]
++     */
++    spin_lock(&ifx_pcie_msi_lock); 
++    msi_irqs[pcie_port].msi_pic_p->pic_table[pos] = SM(irq_idx, IFX_MSI_PIC_INT_LINE) |
++                    SM((msi_irqs[pcie_port].msi_phy_base >> 12), IFX_MSI_PIC_MSG_ADDR) |
++                    SM((1 << pos), IFX_MSI_PIC_MSG_DATA);
++
++    /* Enable this entry */
++    msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~IFX_MSI_PCI_INT_DISABLE;
++    spin_unlock(&ifx_pcie_msi_lock);
++
++    IFX_PCIE_PRINT(PCIE_MSG_MSI, "pic_table[%d]: 0x%08x\n",
++        pos, msi_irqs[pcie_port].msi_pic_p->pic_table[pos]);
++
++    /* Update the number of IRQs the device has available to it */
++    control &= ~PCI_MSI_FLAGS_QSIZE;
++    control |= (request_private_bits << 4);
++    pci_write_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, control);
++
++    irq_set_msi_desc(irq, desc);
++    msg.address_hi = 0x0;
++    msg.address_lo = msi_irqs[pcie_port].msi_phy_base;
++    msg.data = SM((1 << pos), IFX_MSI_PIC_MSG_DATA);
++    IFX_PCIE_PRINT(PCIE_MSG_MSI, "msi_data: pos %d 0x%08x\n", pos, msg.data);
++
++    write_msi_msg(irq, &msg);
++    IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__);
++    return 0;
++}
++
++static int
++pcie_msi_irq_to_port(unsigned int irq, int *port)
++{
++    int ret = 0;
++
++    if (irq == IFX_PCIE_MSI_IR0 || irq == IFX_PCIE_MSI_IR1 ||
++        irq == IFX_PCIE_MSI_IR2 || irq == IFX_PCIE_MSI_IR3) {
++        *port = IFX_PCIE_PORT0;
++    }
++#ifdef CONFIG_IFX_PCIE_2ND_CORE
++    else if (irq == IFX_PCIE1_MSI_IR0 || irq == IFX_PCIE1_MSI_IR1 ||
++        irq == IFX_PCIE1_MSI_IR2 || irq == IFX_PCIE1_MSI_IR3) {
++        *port = IFX_PCIE_PORT1;
++    }
++#endif /* CONFIG_IFX_PCIE_2ND_CORE */
++    else {
++        printk(KERN_ERR "%s: Attempted to teardown illegal " 
++            "MSI interrupt (%d)\n", __func__, irq);
++        ret = -EINVAL;
++    }
++    return ret;
++}
++
++/** 
++ * \fn void arch_teardown_msi_irq(unsigned int irq)
++ * \brief Called when a device no longer needs its MSI interrupts. All 
++ * MSI interrupts for the device are freed. 
++ * 
++ * \param irq   The devices first irq number. There may be multple in sequence.
++ * \return none
++ * \ingroup IFX_PCIE_MSI
++ */
++void 
++arch_teardown_msi_irq(unsigned int irq)
++{
++    int pos;
++    int number_irqs; 
++    u16 bitmask;
++    int pcie_port;
++
++    IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s enter\n", __func__);
++
++    BUG_ON(irq > (INT_NUM_IM4_IRL0 + 31));
++
++    if (pcie_msi_irq_to_port(irq, &pcie_port) != 0) {
++        return;
++    }
++
++    /* Shift the mask to the correct bit location, not always correct 
++     * Probally, the first match will be chosen.
++     */
++    for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos++) {
++        if ((msi_irqs[pcie_port].msi_irq_idx[pos].irq == irq) 
++            && (msi_irqs[pcie_port].msi_free_irq_bitmask & ( 1 << pos))) {
++            break;
++        }
++    }
++    if (pos >= IFX_MSI_IRQ_NUM) {
++        printk(KERN_ERR "%s: Unable to find a matched MSI interrupt\n", __func__);
++        return;
++    }
++    spin_lock(&ifx_pcie_msi_lock);
++    /* Disable this entry */
++    msi_irqs[pcie_port].msi_pic_p->pic_table[pos] |= IFX_MSI_PCI_INT_DISABLE;
++    msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~(IFX_MSI_PIC_INT_LINE | IFX_MSI_PIC_MSG_ADDR | IFX_MSI_PIC_MSG_DATA);
++    spin_unlock(&ifx_pcie_msi_lock); 
++    /*
++     * Count the number of IRQs we need to free by looking at the
++     * msi_multiple_irq_bitmask. Each bit set means that the next
++     * IRQ is also owned by this device.
++     */ 
++    number_irqs = 0; 
++    while (((pos + number_irqs) < IFX_MSI_IRQ_NUM) && 
++        (msi_irqs[pcie_port].msi_multiple_irq_bitmask & (1 << (pos + number_irqs)))) {
++        number_irqs++;
++    }
++    number_irqs++;
++
++    /* Mask with one bit for each IRQ */
++    bitmask = (1 << number_irqs) - 1;
++
++    bitmask <<= pos;
++    if ((msi_irqs[pcie_port].msi_free_irq_bitmask & bitmask) != bitmask) {
++        printk(KERN_ERR "%s: Attempted to teardown MSI "
++             "interrupt (%d) not in use\n", __func__, irq);
++        return;
++    }
++    /* Checks are done, update the in use bitmask */
++    spin_lock(&ifx_pcie_msi_lock);
++    msi_irqs[pcie_port].msi_free_irq_bitmask &= ~bitmask;
++    msi_irqs[pcie_port].msi_multiple_irq_bitmask &= ~(bitmask >> 1);
++    spin_unlock(&ifx_pcie_msi_lock);
++    IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__);
++}
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Chuanhua.Lei@infineon.com");
++MODULE_SUPPORTED_DEVICE("Infineon PCIe IP builtin MSI PIC module");
++MODULE_DESCRIPTION("Infineon PCIe IP builtin MSI PIC driver");
++
+diff --git a/arch/mips/pci/pcie-lantiq-phy.c b/arch/mips/pci/pcie-lantiq-phy.c
+new file mode 100644
+index 0000000..9f5027d
+--- /dev/null
++++ b/arch/mips/pci/pcie-lantiq-phy.c
+@@ -0,0 +1,408 @@
++/******************************************************************************
++**
++** FILE NAME    : ifxmips_pcie_phy.c
++** PROJECT      : IFX UEIP for VRX200
++** MODULES      : PCIe PHY sub module
++**
++** DATE         : 14 May 2009
++** AUTHOR       : Lei Chuanhua
++** DESCRIPTION  : PCIe Root Complex Driver
++** COPYRIGHT    :       Copyright (c) 2009
++**                      Infineon Technologies AG
++**                      Am Campeon 1-12, 85579 Neubiberg, Germany
++**
++**    This program is free software; you can redistribute it and/or modify
++**    it under the terms of the GNU General Public License as published by
++**    the Free Software Foundation; either version 2 of the License, or
++**    (at your option) any later version.
++** HISTORY
++** $Version $Date        $Author         $Comment
++** 0.0.1    14 May,2009  Lei Chuanhua    Initial version
++*******************************************************************************/
++/*!
++ \file ifxmips_pcie_phy.c
++ \ingroup IFX_PCIE  
++ \brief PCIe PHY PLL register programming source file
++*/
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <asm/paccess.h>
++#include <linux/delay.h>
++
++#include "pcie-lantiq.h"
++
++/* PCIe PDI only supports 16 bit operation */
++
++#define IFX_PCIE_PHY_REG_WRITE16(__addr, __data) \
++    ((*(volatile u16 *) (__addr)) = (__data))
++    
++#define IFX_PCIE_PHY_REG_READ16(__addr)  \
++    (*(volatile u16 *) (__addr))
++
++#define IFX_PCIE_PHY_REG16(__addr)   \
++    (*(volatile u16 *) (__addr))
++
++#define IFX_PCIE_PHY_REG(__reg, __value, __mask) do { \
++    u16 read_data;                                    \
++    u16 write_data;                                   \
++    read_data = IFX_PCIE_PHY_REG_READ16((__reg));      \
++    write_data = (read_data & ((u16)~(__mask))) | (((u16)(__value)) & ((u16)(__mask)));\
++    IFX_PCIE_PHY_REG_WRITE16((__reg), write_data);               \
++} while (0)
++
++#define IFX_PCIE_PLL_TIMEOUT 1000 /* Tunnable */
++
++static void
++pcie_phy_comm_setup(int pcie_port)
++{
++   /* PLL Setting */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF);
++
++    /* increase the bias reference voltage */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF);
++
++    /* Endcnt */
++    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF);
++
++    /* force */
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008);
++
++    /* predrv_ser_en */
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF);
++
++    /* ctrl_lim */
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF);
++
++    /* ctrl */
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00);
++
++    /* predrv_ser_en */
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00);
++
++    /* RTERM*/
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF);
++
++    /* Improved 100MHz clock output  */
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF);
++
++    /* Reduced CDR BW to avoid glitches */
++    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF);
++}
++
++#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE
++static void 
++pcie_phy_36mhz_mode_setup(int pcie_port) 
++{
++    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
++
++    /* en_ext_mmd_div_ratio */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
++
++    /* ext_mmd_div_ratio*/
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
++
++    /* pll_ensdm */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
++
++    /* en_const_sdm */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
++
++    /* mmd */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
++
++    /* lf_mode */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
++
++    /* const_sdm */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
++
++    /* const sdm */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
++
++    /* pllmod */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF);
++
++    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
++}
++#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */
++
++#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE
++static void 
++pcie_phy_36mhz_ssc_mode_setup(int pcie_port) 
++{
++    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
++
++    /* PLL Setting */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF);
++
++    /* Increase the bias reference voltage */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF);
++
++    /* Endcnt */
++    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF);
++
++    /* Force */
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008);
++
++    /* Predrv_ser_en */
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF);
++
++    /* ctrl_lim */
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF);
++
++    /* ctrl */
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00);
++
++    /* predrv_ser_en */
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00);
++
++    /* RTERM*/
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF);
++
++    /* en_ext_mmd_div_ratio */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
++
++    /* ext_mmd_div_ratio*/
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
++
++    /* pll_ensdm */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0400, 0x0400);
++
++    /* en_const_sdm */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
++
++    /* mmd */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
++
++    /* lf_mode */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
++
++    /* const_sdm */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
++
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0100);
++    /* const sdm */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
++
++    /* pllmod */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1c72, 0xFFFF);
++
++    /* improved 100MHz clock output  */
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF);
++
++    /* reduced CDR BW to avoid glitches */
++    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF);
++    
++    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
++}
++#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE */
++
++#ifdef CONFIG_IFX_PCIE_PHY_25MHZ_MODE
++static void 
++pcie_phy_25mhz_mode_setup(int pcie_port) 
++{
++    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
++    /* en_const_sdm */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
++
++    /* pll_ensdm */    
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0200);
++
++    /* en_ext_mmd_div_ratio*/
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0002, 0x0002);
++
++    /* ext_mmd_div_ratio*/
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0040, 0x0070);
++
++    /* mmd */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x6000, 0xe000);
++
++    /* lf_mode */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x4000, 0x4000);
++
++    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
++}
++#endif /* CONFIG_IFX_PCIE_PHY_25MHZ_MODE */
++
++#ifdef CONFIG_IFX_PCIE_PHY_100MHZ_MODE
++static void 
++pcie_phy_100mhz_mode_setup(int pcie_port) 
++{
++    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
++    /* en_ext_mmd_div_ratio */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
++
++    /* ext_mmd_div_ratio*/
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
++
++    /* pll_ensdm */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
++
++    /* en_const_sdm */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
++
++    /* mmd */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
++
++    /* lf_mode */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
++
++    /* const_sdm */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
++
++    /* const sdm */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
++
++    /* pllmod */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF);
++
++    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
++}
++#endif /* CONFIG_IFX_PCIE_PHY_100MHZ_MODE */
++
++static int
++pcie_phy_wait_startup_ready(int pcie_port)
++{
++    int i;
++
++    for (i = 0; i < IFX_PCIE_PLL_TIMEOUT; i++) {
++        if ((IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_STATUS(pcie_port)) & 0x0040) != 0) {
++            break;
++        }
++        udelay(10);
++    }
++    if (i >= IFX_PCIE_PLL_TIMEOUT) {
++        printk(KERN_ERR "%s PLL Link timeout\n", __func__);
++        return -1;
++    }
++    return 0;
++}
++
++static void 
++pcie_phy_load_enable(int pcie_port, int slice) 
++{
++    /* Set the load_en of tx/rx slice to '1' */
++    switch (slice) {
++        case 1:
++            IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0010, 0x0010);
++            break;
++        case 2:
++            IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0010, 0x0010);
++            break;
++        case 3:
++            IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0002, 0x0002);
++            break;
++    }
++}
++
++static void 
++pcie_phy_load_disable(int pcie_port, int slice) 
++{ 
++    /* set the load_en of tx/rx slice to '0' */ 
++    switch (slice) {
++        case 1:
++            IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0000, 0x0010);
++            break;
++        case 2:
++            IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0000, 0x0010);
++            break;
++        case 3: 
++            IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0000, 0x0002);
++            break;
++    }
++}
++
++static void pcie_phy_load_war(int pcie_port)
++{
++	int slice;
++
++	for (slice = 1; slice < 4; slice++) {
++		pcie_phy_load_enable(pcie_port, slice);
++		udelay(1);
++		pcie_phy_load_disable(pcie_port, slice);
++	}
++}
++
++static void pcie_phy_tx2_modulation(int pcie_port)
++{
++	IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD1(pcie_port), 0x1FFE, 0xFFFF);
++	IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD2(pcie_port), 0xFFFE, 0xFFFF);
++	IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0601, 0xFFFF);
++	mdelay(1);
++	IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0001, 0xFFFF);
++}
++
++static void pcie_phy_tx1_modulation(int pcie_port)
++{
++	IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD1(pcie_port), 0x1FFE, 0xFFFF);
++	IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD2(pcie_port), 0xFFFE, 0xFFFF);
++	IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0601, 0xFFFF);
++	mdelay(1);
++	IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0001, 0xFFFF);
++}
++
++static void pcie_phy_tx_modulation_war(int pcie_port)
++{
++	int i;
++#define PCIE_PHY_MODULATION_NUM 5
++	for (i = 0; i < PCIE_PHY_MODULATION_NUM; i++) {
++		pcie_phy_tx2_modulation(pcie_port);
++		pcie_phy_tx1_modulation(pcie_port);
++	}
++#undef PCIE_PHY_MODULATION_NUM
++}
++
++void pcie_phy_clock_mode_setup(int pcie_port)
++{
++	pcie_pdi_big_endian(pcie_port);
++
++	/* Enable PDI to access PCIe PHY register */
++	pcie_pdi_pmu_enable(pcie_port);
++
++	/* Configure PLL and PHY clock */
++	pcie_phy_comm_setup(pcie_port);
++
++#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE
++	pcie_phy_36mhz_mode_setup(pcie_port);
++#elif defined(CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE)
++	pcie_phy_36mhz_ssc_mode_setup(pcie_port);
++#elif defined(CONFIG_IFX_PCIE_PHY_25MHZ_MODE)
++	pcie_phy_25mhz_mode_setup(pcie_port);
++#elif defined (CONFIG_IFX_PCIE_PHY_100MHZ_MODE)
++	pcie_phy_100mhz_mode_setup(pcie_port);
++#else
++	#error "PCIE PHY Clock Mode must be chosen first!!!!"
++#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */
++
++	/* Enable PCIe PHY and make PLL setting take effect */
++	pcie_phy_pmu_enable(pcie_port);
++
++	/* Check if we are in startup_ready status */
++	pcie_phy_wait_startup_ready(pcie_port);
++
++	pcie_phy_load_war(pcie_port);
++
++	/* Apply TX modulation workarounds */
++	pcie_phy_tx_modulation_war(pcie_port);
++
++#ifdef IFX_PCI_PHY_REG_DUMP
++	IFX_PCIE_PRINT(PCIE_MSG_PHY, "Modified PHY register dump\n");
++	pcie_phy_reg_dump(pcie_port);
++#endif
++}
++
+diff --git a/arch/mips/pci/pcie-lantiq.c b/arch/mips/pci/pcie-lantiq.c
+new file mode 100644
+index 0000000..1df55b5
+--- /dev/null
++++ b/arch/mips/pci/pcie-lantiq.c
+@@ -0,0 +1,1146 @@
++#include <linux/types.h>
++#include <linux/module.h>
++#include <linux/pci.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/mm.h>
++#include <asm/paccess.h>
++#include <linux/pci.h>
++#include <linux/pci_regs.h>
++#include <linux/platform_device.h>
++
++#define CONFIG_IFX_PCIE_1ST_CORE
++
++#include "pcie-lantiq.h"
++
++#define IFX_PCIE_IR                     (INT_NUM_IM4_IRL0 + 25)
++#define IFX_PCIE_INTA                   (INT_NUM_IM4_IRL0 + 8)
++#define IFX_PCIE_INTB                   (INT_NUM_IM4_IRL0 + 9)
++#define IFX_PCIE_INTC                   (INT_NUM_IM4_IRL0 + 10)
++#define IFX_PCIE_INTD                   (INT_NUM_IM4_IRL0 + 11)
++#define MS(_v, _f)  (((_v) & (_f)) >> _f##_S)
++#define SM(_v, _f)  (((_v) << _f##_S) & (_f))
++#define IFX_REG_SET_BIT(_f, _r) \
++    IFX_REG_W32((IFX_REG_R32((_r)) &~ (_f)) | (_f), (_r))
++#define IFX_PCIE_LTSSM_ENABLE_TIMEOUT 10
++#define IFX_PCIE_PHY_LINK_UP_TIMEOUT  1000
++#define IFX_PCIE_PHY_LOOP_CNT  5
++
++static DEFINE_SPINLOCK(ifx_pcie_lock);
++
++int pcibios_1st_host_bus_nr(void);
++
++unsigned int g_pcie_debug_flag = PCIE_MSG_ANY & (~PCIE_MSG_CFG);
++
++static ifx_pcie_irq_t pcie_irqs[IFX_PCIE_CORE_NR] = {
++    {
++        .ir_irq = {
++            .irq  = IFX_PCIE_IR,
++            .name = "ifx_pcie_rc0",
++        },
++
++        .legacy_irq = {
++            {
++                .irq_bit = PCIE_IRN_INTA,
++                .irq     = IFX_PCIE_INTA,
++            },
++            {
++                .irq_bit = PCIE_IRN_INTB,
++                .irq     = IFX_PCIE_INTB,
++            },
++            {
++                .irq_bit = PCIE_IRN_INTC,
++                .irq     = IFX_PCIE_INTC,
++            },
++            {
++                .irq_bit = PCIE_IRN_INTD,
++                .irq     = IFX_PCIE_INTD,
++            },
++        },
++    },
++};
++
++static inline int pcie_ltssm_enable(int pcie_port)
++{
++	int i;
++
++	IFX_REG_W32(PCIE_RC_CCR_LTSSM_ENABLE, PCIE_RC_CCR(pcie_port)); /* Enable LTSSM */
++
++	/* Wait for the link to come up */
++	for (i = 0; i < IFX_PCIE_LTSSM_ENABLE_TIMEOUT; i++) {
++		if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_RETRAIN_PENDING)) {
++			break;
++		}
++		udelay(10);
++	}
++	if (i >= IFX_PCIE_LTSSM_ENABLE_TIMEOUT) {
++		IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s link timeout!!!!!\n", __func__);
++		return -1;
++	}
++	return 0;
++}
++
++static inline void pcie_status_register_clear(int pcie_port)
++{
++	IFX_REG_W32(0, PCIE_RC_DR(pcie_port));
++	IFX_REG_W32(0, PCIE_PCICMDSTS(pcie_port));
++	IFX_REG_W32(0, PCIE_DCTLSTS(pcie_port));
++	IFX_REG_W32(0, PCIE_LCTLSTS(pcie_port));
++	IFX_REG_W32(0, PCIE_SLCTLSTS(pcie_port));
++	IFX_REG_W32(0, PCIE_RSTS(pcie_port));
++	IFX_REG_W32(0, PCIE_UES_R(pcie_port));
++	IFX_REG_W32(0, PCIE_UEMR(pcie_port));
++	IFX_REG_W32(0, PCIE_UESR(pcie_port));
++	IFX_REG_W32(0, PCIE_CESR(pcie_port));
++	IFX_REG_W32(0, PCIE_CEMR(pcie_port));
++	IFX_REG_W32(0, PCIE_RESR(pcie_port));
++	IFX_REG_W32(0, PCIE_PVCCRSR(pcie_port));
++	IFX_REG_W32(0, PCIE_VC0_RSR0(pcie_port));
++	IFX_REG_W32(0, PCIE_TPFCS(pcie_port));
++	IFX_REG_W32(0, PCIE_TNPFCS(pcie_port));
++	IFX_REG_W32(0, PCIE_TCFCS(pcie_port));
++	IFX_REG_W32(0, PCIE_QSR(pcie_port));
++	IFX_REG_W32(0, PCIE_IOBLSECS(pcie_port));
++}
++
++static inline int ifx_pcie_link_up(int pcie_port)
++{
++	return (IFX_REG_R32(PCIE_PHY_SR(pcie_port)) & PCIE_PHY_SR_PHY_LINK_UP) ? 1 : 0;
++}
++
++static inline void pcie_mem_io_setup(int pcie_port)
++{
++	unsigned int reg;
++	/*
++	 * BAR[0:1] readonly register 
++	 * RC contains only minimal BARs for packets mapped to this device 
++	 * Mem/IO filters defines a range of memory occupied by memory mapped IO devices that
++	 * reside on the downstream side fo the bridge.
++	 */
++	reg = SM((PCIE_MEM_PHY_PORT_TO_END(pcie_port) >> 20), PCIE_MBML_MEM_LIMIT_ADDR)
++		| SM((PCIE_MEM_PHY_PORT_TO_BASE(pcie_port) >> 20), PCIE_MBML_MEM_BASE_ADDR);
++	IFX_REG_W32(reg, PCIE_MBML(pcie_port));
++
++	/* PCIe_PBML, same as MBML */
++	IFX_REG_W32(IFX_REG_R32(PCIE_MBML(pcie_port)), PCIE_PMBL(pcie_port));
++
++	/* IO Address Range */
++	reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 12), PCIE_IOBLSECS_IO_LIMIT_ADDR)
++		| SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 12), PCIE_IOBLSECS_IO_BASE_ADDR);
++	reg |= PCIE_IOBLSECS_32BIT_IO_ADDR;
++		IFX_REG_W32(reg, PCIE_IOBLSECS(pcie_port));
++
++	reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT)
++		| SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_BASE);
++	IFX_REG_W32(reg, PCIE_IO_BANDL(pcie_port));
++}
++
++static inline void pcie_msi_setup(int pcie_port)
++{
++	unsigned int reg;
++
++	/* XXX, MSI stuff should only apply to EP */
++	/* MSI Capability: Only enable 32-bit addresses */
++	reg = IFX_REG_R32(PCIE_MCAPR(pcie_port));
++	reg &= ~PCIE_MCAPR_ADDR64_CAP;
++	reg |= PCIE_MCAPR_MSI_ENABLE;
++
++	/* Disable multiple message */
++	reg &= ~(PCIE_MCAPR_MULTI_MSG_CAP | PCIE_MCAPR_MULTI_MSG_ENABLE);
++	IFX_REG_W32(reg, PCIE_MCAPR(pcie_port));
++}
++
++static inline void pcie_pm_setup(int pcie_port)
++{
++	unsigned int reg;
++
++	/* Enable PME, Soft reset enabled */
++	reg = IFX_REG_R32(PCIE_PM_CSR(pcie_port));
++	reg |= PCIE_PM_CSR_PME_ENABLE | PCIE_PM_CSR_SW_RST;
++	IFX_REG_W32(reg, PCIE_PM_CSR(pcie_port));
++}
++
++static inline void pcie_bus_setup(int pcie_port)
++{
++	unsigned int reg;
++
++	reg = SM(0, PCIE_BNR_PRIMARY_BUS_NUM) | SM(1, PCIE_PNR_SECONDARY_BUS_NUM) | SM(0xFF, PCIE_PNR_SUB_BUS_NUM);
++	IFX_REG_W32(reg, PCIE_BNR(pcie_port));
++}
++
++static inline void pcie_device_setup(int pcie_port)
++{
++	unsigned int reg;
++
++	/* Device capability register, set up Maximum payload size */
++	reg = IFX_REG_R32(PCIE_DCAP(pcie_port));
++	reg |= PCIE_DCAP_ROLE_BASE_ERR_REPORT;
++	reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCAP_MAX_PAYLOAD_SIZE);
++
++	/* Only available for EP */
++	reg &= ~(PCIE_DCAP_EP_L0S_LATENCY | PCIE_DCAP_EP_L1_LATENCY);
++	IFX_REG_W32(reg, PCIE_DCAP(pcie_port));
++
++	/* Device control and status register */
++	/* Set Maximum Read Request size for the device as a Requestor */
++	reg = IFX_REG_R32(PCIE_DCTLSTS(pcie_port));
++
++	/* 
++	 * Request size can be larger than the MPS used, but the completions returned 
++	 * for the read will be bounded by the MPS size.
++	 * In our system, Max request size depends on AHB burst size. It is 64 bytes.
++	 * but we set it as 128 as minimum one.
++	 */
++	reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_READ_SIZE)
++		| SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_PAYLOAD_SIZE);
++
++	/* Enable relaxed ordering, no snoop, and all kinds of errors */
++	reg |= PCIE_DCTLSTS_RELAXED_ORDERING_EN | PCIE_DCTLSTS_ERR_EN | PCIE_DCTLSTS_NO_SNOOP_EN;
++
++	IFX_REG_W32(reg, PCIE_DCTLSTS(pcie_port));
++}
++
++static inline void pcie_link_setup(int pcie_port)
++{
++	unsigned int reg;
++
++	/*
++	 * XXX, Link capability register, bit 18 for EP CLKREQ# dynamic clock management for L1, L2/3 CPM 
++	 * L0s is reported during link training via TS1 order set by N_FTS
++	 */
++	reg = IFX_REG_R32(PCIE_LCAP(pcie_port));
++	reg &= ~PCIE_LCAP_L0S_EIXT_LATENCY;
++	reg |= SM(3, PCIE_LCAP_L0S_EIXT_LATENCY);
++	IFX_REG_W32(reg, PCIE_LCAP(pcie_port));
++
++	/* Link control and status register */
++	reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port));
++
++	/* Link Enable, ASPM enabled  */
++	reg &= ~PCIE_LCTLSTS_LINK_DISABLE;
++
++#ifdef CONFIG_PCIEASPM
++	/*  
++	 * We use the same physical reference clock that the platform provides on the connector 
++	 * It paved the way for ASPM to calculate the new exit Latency
++	 */
++	reg |= PCIE_LCTLSTS_SLOT_CLK_CFG;
++	reg |= PCIE_LCTLSTS_COM_CLK_CFG;
++	/*
++	 * We should disable ASPM by default except that we have dedicated power management support
++	 * Enable ASPM will cause the system hangup/instability, performance degration
++	 */
++	reg |= PCIE_LCTLSTS_ASPM_ENABLE;
++#else
++	reg &= ~PCIE_LCTLSTS_ASPM_ENABLE;
++#endif /* CONFIG_PCIEASPM */
++
++	/* 
++	 * The maximum size of any completion with data packet is bounded by the MPS setting 
++	 * in  device control register 
++	 */
++	/* RCB may cause multiple split transactions, two options available, we use 64 byte RCB */
++	reg &= ~ PCIE_LCTLSTS_RCB128;
++	IFX_REG_W32(reg, PCIE_LCTLSTS(pcie_port));
++}
++
++static inline void pcie_error_setup(int pcie_port)
++{
++	unsigned int reg;
++
++	/* 
++	 * Forward ERR_COR, ERR_NONFATAL, ERR_FATAL to the backbone 
++	 * Poisoned write TLPs and completions indicating poisoned TLPs will set the PCIe_PCICMDSTS.MDPE 
++	 */
++	reg = IFX_REG_R32(PCIE_INTRBCTRL(pcie_port));
++	reg |= PCIE_INTRBCTRL_SERR_ENABLE | PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE;
++
++	IFX_REG_W32(reg, PCIE_INTRBCTRL(pcie_port));
++
++	/* Uncorrectable Error Mask Register, Unmask <enable> all bits in PCIE_UESR */
++	reg = IFX_REG_R32(PCIE_UEMR(pcie_port));
++	reg &= ~PCIE_ALL_UNCORRECTABLE_ERR;
++	IFX_REG_W32(reg, PCIE_UEMR(pcie_port));
++
++	/* Uncorrectable Error Severity Register, ALL errors are FATAL */
++	IFX_REG_W32(PCIE_ALL_UNCORRECTABLE_ERR, PCIE_UESR(pcie_port));
++
++	/* Correctable Error Mask Register, unmask <enable> all bits */
++	reg = IFX_REG_R32(PCIE_CEMR(pcie_port));
++	reg &= ~PCIE_CORRECTABLE_ERR;
++	IFX_REG_W32(reg, PCIE_CEMR(pcie_port));
++
++	/* Advanced Error Capabilities and Control Registr */
++	reg = IFX_REG_R32(PCIE_AECCR(pcie_port));
++	reg |= PCIE_AECCR_ECRC_CHECK_EN | PCIE_AECCR_ECRC_GEN_EN;
++	IFX_REG_W32(reg, PCIE_AECCR(pcie_port));
++
++	/* Root Error Command Register, Report all types of errors */
++	reg = IFX_REG_R32(PCIE_RECR(pcie_port));
++	reg |= PCIE_RECR_ERR_REPORT_EN;
++	IFX_REG_W32(reg, PCIE_RECR(pcie_port));
++
++	/* Clear the Root status register */
++	reg = IFX_REG_R32(PCIE_RESR(pcie_port));
++	IFX_REG_W32(reg, PCIE_RESR(pcie_port));
++}
++
++static inline void pcie_root_setup(int pcie_port)
++{
++	unsigned int reg;
++
++	/* Root control and capabilities register */
++	reg = IFX_REG_R32(PCIE_RCTLCAP(pcie_port));
++	reg |= PCIE_RCTLCAP_SERR_ENABLE | PCIE_RCTLCAP_PME_INT_EN;
++	IFX_REG_W32(reg, PCIE_RCTLCAP(pcie_port));
++}
++
++static inline void pcie_vc_setup(int pcie_port)
++{
++	unsigned int reg;
++
++	/* Port VC Capability Register 2 */
++	reg = IFX_REG_R32(PCIE_PVC2(pcie_port));
++	reg &= ~PCIE_PVC2_VC_ARB_WRR;
++	reg |= PCIE_PVC2_VC_ARB_16P_FIXED_WRR;
++	IFX_REG_W32(reg, PCIE_PVC2(pcie_port));
++
++	/* VC0 Resource Capability Register */
++	reg = IFX_REG_R32(PCIE_VC0_RC(pcie_port));
++	reg &= ~PCIE_VC0_RC_REJECT_SNOOP;
++	IFX_REG_W32(reg, PCIE_VC0_RC(pcie_port));
++}
++
++static inline void pcie_port_logic_setup(int pcie_port)
++{
++	unsigned int reg;
++
++	/* FTS number, default 12, increase to 63, may increase time from/to L0s to L0  */
++	reg = IFX_REG_R32(PCIE_AFR(pcie_port));
++	reg &= ~(PCIE_AFR_FTS_NUM | PCIE_AFR_COM_FTS_NUM);
++	reg |= SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_FTS_NUM)
++		| SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_COM_FTS_NUM);
++	/* L0s and L1 entry latency */
++	reg &= ~(PCIE_AFR_L0S_ENTRY_LATENCY | PCIE_AFR_L1_ENTRY_LATENCY);
++	reg |= SM(PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L0S_ENTRY_LATENCY)
++		| SM(PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L1_ENTRY_LATENCY);
++	IFX_REG_W32(reg, PCIE_AFR(pcie_port));
++
++	/* Port Link Control Register */
++	reg = IFX_REG_R32(PCIE_PLCR(pcie_port));
++	reg |= PCIE_PLCR_DLL_LINK_EN;  /* Enable the DLL link */
++	IFX_REG_W32(reg, PCIE_PLCR(pcie_port));
++
++	/* Lane Skew Register */
++	reg = IFX_REG_R32(PCIE_LSR(pcie_port));
++	/* Enable ACK/NACK and FC */
++	reg &= ~(PCIE_LSR_ACKNAK_DISABLE | PCIE_LSR_FC_DISABLE); 
++	IFX_REG_W32(reg, PCIE_LSR(pcie_port));
++
++	/* Symbol Timer Register and Filter Mask Register 1 */
++	reg = IFX_REG_R32(PCIE_STRFMR(pcie_port));
++
++	/* Default SKP interval is very accurate already, 5us */
++	/* Enable IO/CFG transaction */
++	reg |= PCIE_STRFMR_RX_CFG_TRANS_ENABLE | PCIE_STRFMR_RX_IO_TRANS_ENABLE;
++	/* Disable FC WDT */
++	reg &= ~PCIE_STRFMR_FC_WDT_DISABLE;
++	IFX_REG_W32(reg, PCIE_STRFMR(pcie_port));
++
++	/* Filter Masker Register 2 */
++	reg = IFX_REG_R32(PCIE_FMR2(pcie_port));
++	reg |= PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 | PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1;
++	IFX_REG_W32(reg, PCIE_FMR2(pcie_port));
++
++	/* VC0 Completion Receive Queue Control Register */
++	reg = IFX_REG_R32(PCIE_VC0_CRQCR(pcie_port));
++	reg &= ~PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE;
++	reg |= SM(PCIE_VC0_TLP_QUEUE_MODE_BYPASS, PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE);
++	IFX_REG_W32(reg, PCIE_VC0_CRQCR(pcie_port));
++}
++
++static inline void pcie_rc_cfg_reg_setup(int pcie_port)
++{
++	/* diable ltssm */
++	IFX_REG_W32(0, PCIE_RC_CCR(pcie_port));
++
++	pcie_mem_io_setup(pcie_port);
++	pcie_msi_setup(pcie_port);
++	pcie_pm_setup(pcie_port);
++	pcie_bus_setup(pcie_port);
++	pcie_device_setup(pcie_port);
++	pcie_link_setup(pcie_port);
++	pcie_error_setup(pcie_port);
++	pcie_root_setup(pcie_port);
++	pcie_vc_setup(pcie_port);
++	pcie_port_logic_setup(pcie_port);
++}
++
++static int ifx_pcie_wait_phy_link_up(int pcie_port)
++{
++	int i;
++
++	/* Wait for PHY link is up */
++	for (i = 0; i < IFX_PCIE_PHY_LINK_UP_TIMEOUT; i++) {
++		if (ifx_pcie_link_up(pcie_port)) {
++			break;
++		}
++		udelay(100);
++	}
++	if (i >= IFX_PCIE_PHY_LINK_UP_TIMEOUT) {
++		printk(KERN_ERR "%s timeout\n", __func__);
++		return -1;
++	}
++
++	/* Check data link up or not */
++	if (!(IFX_REG_R32(PCIE_RC_DR(pcie_port)) & PCIE_RC_DR_DLL_UP)) {
++		printk(KERN_ERR "%s DLL link is still down\n", __func__);
++		return -1;
++	}
++
++	/* Check Data link active or not */
++	if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_DLL_ACTIVE)) {
++		printk(KERN_ERR "%s DLL is not active\n", __func__);
++		return -1;
++	}
++	return 0;
++}
++
++static inline int pcie_app_loigc_setup(int pcie_port)
++{
++	IFX_REG_W32(PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS, PCIE_AHB_CTRL(pcie_port));
++
++	/* Pull PCIe EP out of reset */
++	pcie_device_rst_deassert(pcie_port);
++
++	/* Start LTSSM training between RC and EP */
++	pcie_ltssm_enable(pcie_port);
++
++	/* Check PHY status after enabling LTSSM */
++	if (ifx_pcie_wait_phy_link_up(pcie_port) != 0) {
++		return -1;
++	}
++	return 0;
++}
++
++/* 
++ * Must be done after ltssm due to based on negotiated link 
++ * width and payload size
++ * Update the Replay Time Limit. Empirically, some PCIe 
++ * devices take a little longer to respond than expected under 
++ * load. As a workaround for this we configure the Replay Time 
++ * Limit to the value expected for a 512 byte MPS instead of 
++ * our actual 128 byte MPS. The numbers below are directly 
++ * from the PCIe spec table 3-4/5. 
++ */
++static inline void pcie_replay_time_update(int pcie_port)
++{
++	unsigned int reg;
++	int nlw;
++	int rtl;
++
++	reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port));
++
++	nlw = MS(reg, PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH);
++	switch (nlw) {
++	case PCIE_MAX_LENGTH_WIDTH_X1:
++		rtl = 1677;
++		break;
++	case PCIE_MAX_LENGTH_WIDTH_X2:
++		rtl = 867;
++		break;
++	case PCIE_MAX_LENGTH_WIDTH_X4:
++		rtl = 462;
++		break;
++	case PCIE_MAX_LENGTH_WIDTH_X8:
++		rtl = 258;
++		break;
++	default:
++		rtl = 1677;
++		break;
++	}
++	reg = IFX_REG_R32(PCIE_ALTRT(pcie_port));
++	reg &= ~PCIE_ALTRT_REPLAY_TIME_LIMIT;
++	reg |= SM(rtl, PCIE_ALTRT_REPLAY_TIME_LIMIT);
++	IFX_REG_W32(reg, PCIE_ALTRT(pcie_port));
++
++	IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_ALTRT 0x%08x\n",
++		__func__, IFX_REG_R32(PCIE_ALTRT(pcie_port)));
++}
++
++/*
++ * Table 359 Enhanced Configuration Address Mapping1)
++ * 1) This table is defined in Table 7-1, page 341, PCI Express Base Specification v1.1
++ * Memory Address PCI Express Configuration Space
++ * A[(20+n-1):20] Bus Number 1 < n < 8
++ * A[19:15] Device Number
++ * A[14:12] Function Number
++ * A[11:8] Extended Register Number
++ * A[7:2] Register Number
++ * A[1:0] Along with size of the access, used to generate Byte Enables
++ * For VR9, only the address bits [22:0] are mapped to the configuration space:
++ * . Address bits [22:20] select the target bus (1-of-8)1)
++ * . Address bits [19:15] select the target device (1-of-32) on the bus
++ * . Address bits [14:12] select the target function (1-of-8) within the device.
++ * . Address bits [11:2] selects the target dword (1-of-1024) within the selected function.s configuration space
++ * . Address bits [1:0] define the start byte location within the selected dword.
++ */
++static inline unsigned int pcie_bus_addr(u8 bus_num, u16 devfn, int where)
++{
++	unsigned int addr;
++	u8  bus;
++
++	if (!bus_num) {
++		/* type 0 */
++		addr = ((PCI_SLOT(devfn) & 0x1F) << 15) | ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF)& ~3);
++	} else {
++		bus = bus_num;
++		/* type 1, only support 8 buses  */
++		addr = ((bus & 0x7) << 20) | ((PCI_SLOT(devfn) & 0x1F) << 15) |
++			((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF) & ~3);
++	}
++	IFX_PCIE_PRINT(PCIE_MSG_CFG, "%s: bus addr : %02x:%02x.%01x/%02x, addr=%08x\n",
++		__func__, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn), where, addr);
++	return addr;
++}
++
++static int pcie_valid_config(int pcie_port, int bus, int dev)
++{
++	/* RC itself */
++	if ((bus == 0) && (dev == 0))
++		return 1;
++
++	/* No physical link */
++	if (!ifx_pcie_link_up(pcie_port))
++		return 0;
++
++	/* Bus zero only has RC itself
++	* XXX, check if EP will be integrated 
++	*/
++	if ((bus == 0) && (dev != 0))
++		return 0;
++
++	/* Maximum 8 buses supported for VRX */
++	if (bus > 9)
++		return 0;
++
++	/* 
++	 * PCIe is PtP link, one bus only supports only one device 
++	 * except bus zero and PCIe switch which is virtual bus device
++	 * The following two conditions really depends on the system design
++	 * and attached the device.
++	 * XXX, how about more new switch
++	 */
++	if ((bus == 1) && (dev != 0))
++		return 0;
++
++	if ((bus >= 3) && (dev != 0))
++		return 0;
++	return 1;
++}
++
++static inline unsigned int ifx_pcie_cfg_rd(int pcie_port, unsigned int reg)
++{
++	return IFX_REG_R32((volatile unsigned int *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg));
++}
++
++static inline void ifx_pcie_cfg_wr(int pcie_port, unsigned int reg, unsigned int val)
++{
++	IFX_REG_W32( val, (volatile unsigned int *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg));
++}
++
++static inline unsigned int ifx_pcie_rc_cfg_rd(int pcie_port, unsigned int reg)
++{
++	return IFX_REG_R32((volatile unsigned int *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg));
++}
++
++static inline void ifx_pcie_rc_cfg_wr(int pcie_port, unsigned int reg, unsigned int val)
++{
++	IFX_REG_W32(val, (volatile unsigned int *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg));
++}
++
++unsigned int ifx_pcie_bus_enum_read_hack(int where, unsigned int value)
++{
++	unsigned int tvalue = value;
++
++	if (where == PCI_PRIMARY_BUS) {
++		u8 primary, secondary, subordinate;
++
++		primary = tvalue & 0xFF;
++		secondary = (tvalue >> 8) & 0xFF;
++		subordinate = (tvalue >> 16) & 0xFF;
++		primary += pcibios_1st_host_bus_nr();
++		secondary += pcibios_1st_host_bus_nr();
++		subordinate += pcibios_1st_host_bus_nr();
++		tvalue = (tvalue & 0xFF000000) | (unsigned int)primary | (unsigned int)(secondary << 8) | (unsigned int)(subordinate << 16);
++	}
++	return tvalue;
++}
++
++unsigned int ifx_pcie_bus_enum_write_hack(int where, unsigned int value)
++{
++	unsigned int tvalue = value;
++
++	if (where == PCI_PRIMARY_BUS) {
++		u8 primary, secondary, subordinate;
++
++		primary = tvalue & 0xFF;
++		secondary = (tvalue >> 8) & 0xFF;
++		subordinate = (tvalue >> 16) & 0xFF;
++		if (primary > 0 && primary != 0xFF)
++			primary -= pcibios_1st_host_bus_nr();
++		if (secondary > 0 && secondary != 0xFF)
++			secondary -= pcibios_1st_host_bus_nr();
++		if (subordinate > 0 && subordinate != 0xFF)
++			subordinate -= pcibios_1st_host_bus_nr();
++		tvalue = (tvalue & 0xFF000000) | (unsigned int)primary | (unsigned int)(secondary << 8) | (unsigned int)(subordinate << 16);
++	} else if (where == PCI_SUBORDINATE_BUS) {
++		u8 subordinate = tvalue & 0xFF;
++		subordinate = subordinate > 0 ? subordinate - pcibios_1st_host_bus_nr() : 0;
++		tvalue = subordinate;
++	}
++	return tvalue;
++}
++
++/** 
++ * \fn static int ifx_pcie_read_config(struct pci_bus *bus, unsigned int devfn, 
++ *                   int where, int size, unsigned int *value)
++ * \brief Read a value from configuration space 
++ * 
++ * \param[in] bus    Pointer to pci bus
++ * \param[in] devfn  PCI device function number
++ * \param[in] where  PCI register number 
++ * \param[in] size   Register read size
++ * \param[out] value    Pointer to return value
++ * \return  PCIBIOS_BAD_REGISTER_NUMBER Invalid register number
++ * \return  PCIBIOS_FUNC_NOT_SUPPORTED  PCI function not supported
++ * \return  PCIBIOS_DEVICE_NOT_FOUND    PCI device not found
++ * \return  PCIBIOS_SUCCESSFUL          OK
++ * \ingroup IFX_PCIE_OS
++ */
++static int ifx_pcie_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, unsigned int *value)
++{
++	unsigned int data = 0;
++	int bus_number = bus->number;
++	static const unsigned int mask[8] = {0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0};
++	int ret = PCIBIOS_SUCCESSFUL;
++	struct ifx_pci_controller *ctrl = bus->sysdata;
++	int pcie_port = ctrl->port;
++
++	if (unlikely(size != 1 && size != 2 && size != 4)){
++		ret = PCIBIOS_BAD_REGISTER_NUMBER;
++		goto out;
++	}
++
++	/* Make sure the address is aligned to natural boundary */
++	if (unlikely(((size - 1) & where))) {
++		ret = PCIBIOS_BAD_REGISTER_NUMBER;
++		goto out;
++	}
++
++	/* 
++	 * If we are second controller, we have to cheat OS so that it assume 
++	 * its bus number starts from 0 in host controller
++	 */
++	bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port);
++
++	/* 
++	 * We need to force the bus number to be zero on the root 
++	 * bus. Linux numbers the 2nd root bus to start after all 
++	 * busses on root 0. 
++	 */
++	if (bus->parent == NULL)
++		bus_number = 0;
++
++	/* 
++	 * PCIe only has a single device connected to it. It is 
++	 * always device ID 0. Don't bother doing reads for other 
++	 * device IDs on the first segment. 
++	 */
++	if ((bus_number == 0) && (PCI_SLOT(devfn) != 0)) {
++		ret = PCIBIOS_FUNC_NOT_SUPPORTED;
++		goto out;
++	}
++
++	if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) {
++		*value = 0xffffffff;
++		ret = PCIBIOS_DEVICE_NOT_FOUND;
++		goto out;
++	}
++
++	IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: %02x:%02x.%01x/%02x:%01d\n", __func__, bus_number,
++		PCI_SLOT(devfn), PCI_FUNC(devfn), where, size);
++
++	PCIE_IRQ_LOCK(ifx_pcie_lock);
++	if (bus_number == 0) { /* RC itself */
++		unsigned int t;
++
++		t = (where & ~3);
++		data = ifx_pcie_rc_cfg_rd(pcie_port, t);
++		IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: rd local cfg, offset:%08x, data:%08x\n",
++			__func__, t, data);
++	} else {
++		unsigned int addr = pcie_bus_addr(bus_number, devfn, where);
++
++		data = ifx_pcie_cfg_rd(pcie_port, addr);
++		if (pcie_port == IFX_PCIE_PORT0) {
++#ifdef CONFIG_IFX_PCIE_HW_SWAP
++			data = le32_to_cpu(data);
++#endif /* CONFIG_IFX_PCIE_HW_SWAP */
++		} else {
++#ifdef CONFIG_IFX_PCIE1_HW_SWAP
++			data = le32_to_cpu(data);
++#endif /* CONFIG_IFX_PCIE_HW_SWAP */
++		}
++	}
++	/* To get a correct PCI topology, we have to restore the bus number to OS */
++	data = ifx_pcie_bus_enum_hack(bus, devfn, where, data, pcie_port, 1);
++
++	PCIE_IRQ_UNLOCK(ifx_pcie_lock);
++	IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: read config: data=%08x raw=%08x\n",
++		__func__, (data >> (8 * (where & 3))) & mask[size & 7], data); 
++
++	*value = (data >> (8 * (where & 3))) & mask[size & 7];
++out:
++	return ret;
++}
++
++static unsigned int ifx_pcie_size_to_value(int where, int size, unsigned int data, unsigned int value)
++{
++	unsigned int shift;
++	unsigned int tdata = data;
++
++	switch (size) {
++	case 1:
++		shift = (where & 0x3) << 3;
++		tdata &= ~(0xffU << shift);
++		tdata |= ((value & 0xffU) << shift);
++		break;
++	case 2:
++		shift = (where & 3) << 3;
++		tdata &= ~(0xffffU << shift);
++		tdata |= ((value & 0xffffU) << shift);
++		break;
++	case 4:
++		tdata = value;
++		break;
++	}
++	return tdata;
++}
++
++/** 
++ * \fn static static int ifx_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
++ *                 int where, int size, unsigned int value)
++ * \brief Write a value to PCI configuration space 
++ * 
++ * \param[in] bus    Pointer to pci bus
++ * \param[in] devfn  PCI device function number
++ * \param[in] where  PCI register number 
++ * \param[in] size   The register size to be written
++ * \param[in] value  The valule to be written
++ * \return PCIBIOS_BAD_REGISTER_NUMBER Invalid register number
++ * \return PCIBIOS_DEVICE_NOT_FOUND    PCI device not found
++ * \return PCIBIOS_SUCCESSFUL          OK
++ * \ingroup IFX_PCIE_OS
++ */
++static int ifx_pcie_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, unsigned int value)
++{
++	int bus_number = bus->number;
++	int ret = PCIBIOS_SUCCESSFUL;
++	struct ifx_pci_controller *ctrl = bus->sysdata;
++	int pcie_port = ctrl->port;
++	unsigned int tvalue = value;
++	unsigned int data;
++
++	/* Make sure the address is aligned to natural boundary */
++	if (unlikely(((size - 1) & where))) {
++		ret = PCIBIOS_BAD_REGISTER_NUMBER;
++		goto out;
++	}
++	/* 
++	 * If we are second controller, we have to cheat OS so that it assume 
++	 * its bus number starts from 0 in host controller
++ 	 */
++	bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port);
++
++	/* 
++	 * We need to force the bus number to be zero on the root 
++	 * bus. Linux numbers the 2nd root bus to start after all 
++	 * busses on root 0. 
++	 */
++	if (bus->parent == NULL)
++		bus_number = 0;
++
++	if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) {
++		ret = PCIBIOS_DEVICE_NOT_FOUND;
++		goto out;
++	}
++
++	IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: %02x:%02x.%01x/%02x:%01d value=%08x\n", __func__,
++		bus_number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, value);
++
++	/* XXX, some PCIe device may need some delay */
++	PCIE_IRQ_LOCK(ifx_pcie_lock);
++
++	/* 
++	 * To configure the correct bus topology using native way, we have to cheat Os so that
++	 * it can configure the PCIe hardware correctly.
++	 */
++	tvalue = ifx_pcie_bus_enum_hack(bus, devfn, where, value, pcie_port, 0);
++
++	if (bus_number == 0) { /* RC itself */
++		unsigned int t;
++
++		t = (where & ~3);
++		IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr local cfg, offset:%08x, fill:%08x\n", __func__, t, value);
++		data = ifx_pcie_rc_cfg_rd(pcie_port, t);
++		IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd local cfg, offset:%08x, data:%08x\n", __func__, t, data);
++
++		data = ifx_pcie_size_to_value(where, size, data, tvalue);
++
++		IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr local cfg, offset:%08x, value:%08x\n", __func__, t, data);
++		ifx_pcie_rc_cfg_wr(pcie_port, t, data);
++		IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd local cfg, offset:%08x, value:%08x\n",
++			__func__, t, ifx_pcie_rc_cfg_rd(pcie_port, t));
++	} else {
++		unsigned int addr = pcie_bus_addr(bus_number, devfn, where);
++
++		IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr cfg, offset:%08x, fill:%08x\n", __func__, addr, value);
++		data = ifx_pcie_cfg_rd(pcie_port, addr);
++		if (pcie_port == IFX_PCIE_PORT0) {
++#ifdef CONFIG_IFX_PCIE_HW_SWAP
++			data = le32_to_cpu(data);
++#endif /* CONFIG_IFX_PCIE_HW_SWAP */
++		} else {
++#ifdef CONFIG_IFX_PCIE1_HW_SWAP
++			data = le32_to_cpu(data);
++#endif /* CONFIG_IFX_PCIE_HW_SWAP */
++		}
++		IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd cfg, offset:%08x, data:%08x\n", __func__, addr, data);
++
++		data = ifx_pcie_size_to_value(where, size, data, tvalue);
++		if (pcie_port == IFX_PCIE_PORT0) {
++#ifdef CONFIG_IFX_PCIE_HW_SWAP
++			data = cpu_to_le32(data);
++#endif /* CONFIG_IFX_PCIE_HW_SWAP */
++		} else {
++#ifdef CONFIG_IFX_PCIE1_HW_SWAP
++			data = cpu_to_le32(data);
++#endif /* CONFIG_IFX_PCIE_HW_SWAP */
++		}
++		IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: wr cfg, offset:%08x, value:%08x\n", __func__, addr, data);
++		ifx_pcie_cfg_wr(pcie_port, addr, data);
++		IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: rd cfg, offset:%08x, value:%08x\n", 
++			__func__, addr, ifx_pcie_cfg_rd(pcie_port, addr));
++	}
++	PCIE_IRQ_UNLOCK(ifx_pcie_lock);
++out:
++	return ret;
++}
++
++static struct resource ifx_pcie_io_resource = {
++	.name  = "PCIe0 I/O space",
++	.start = PCIE_IO_PHY_BASE,
++	.end = PCIE_IO_PHY_END,
++	.flags = IORESOURCE_IO,
++};
++
++static struct resource ifx_pcie_mem_resource = {
++	.name = "PCIe0 Memory space",
++	.start = PCIE_MEM_PHY_BASE,
++	.end = PCIE_MEM_PHY_END,
++	.flags = IORESOURCE_MEM,
++};
++
++static struct pci_ops ifx_pcie_ops = {
++	.read = ifx_pcie_read_config,
++	.write = ifx_pcie_write_config,
++};
++
++static struct ifx_pci_controller ifx_pcie_controller[IFX_PCIE_CORE_NR] = {
++	{
++		.pcic = {
++			.pci_ops = &ifx_pcie_ops,
++			.mem_resource = &ifx_pcie_mem_resource,
++			.io_resource = &ifx_pcie_io_resource,
++		},
++		.port = IFX_PCIE_PORT0,
++	},
++};
++
++static inline void pcie_core_int_clear_all(int pcie_port)
++{
++	unsigned int reg;
++	reg = IFX_REG_R32(PCIE_IRNCR(pcie_port));
++	reg &= PCIE_RC_CORE_COMBINED_INT;
++	IFX_REG_W32(reg, PCIE_IRNCR(pcie_port));
++}
++
++static irqreturn_t pcie_rc_core_isr(int irq, void *dev_id)
++{
++	struct ifx_pci_controller *ctrl = (struct ifx_pci_controller *)dev_id;
++	int pcie_port = ctrl->port;
++
++	IFX_PCIE_PRINT(PCIE_MSG_ISR, "PCIe RC error intr %d\n", irq);
++	pcie_core_int_clear_all(pcie_port);
++	return IRQ_HANDLED;
++}
++
++static int pcie_rc_core_int_init(int pcie_port)
++{
++	int ret;
++
++	/* Enable core interrupt */
++	IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNEN(pcie_port));
++
++	/* Clear it first */
++	IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNCR(pcie_port));
++	ret = request_irq(pcie_irqs[pcie_port].ir_irq.irq, pcie_rc_core_isr, IRQF_DISABLED,
++	pcie_irqs[pcie_port].ir_irq.name, &ifx_pcie_controller[pcie_port]);
++	if (ret)
++		printk(KERN_ERR "%s request irq %d failed\n", __func__, IFX_PCIE_IR);
++
++	return ret;
++}
++
++int ifx_pcie_bios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++	unsigned int irq_bit = 0;
++	int irq = 0;
++	struct ifx_pci_controller *ctrl = dev->bus->sysdata;
++	int pcie_port = ctrl->port;
++
++	IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s port %d dev %s slot %d pin %d \n", __func__, pcie_port, pci_name(dev), slot, pin);
++
++	if ((pin == PCIE_LEGACY_DISABLE) || (pin > PCIE_LEGACY_INT_MAX)) {
++		printk(KERN_WARNING "WARNING: dev %s: invalid interrupt pin %d\n", pci_name(dev), pin);
++		return -1;
++	}
++	/* Pin index so minus one */
++	irq_bit = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq_bit;
++	irq = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq;
++	IFX_REG_SET_BIT(irq_bit, PCIE_IRNEN(pcie_port));
++	IFX_REG_SET_BIT(irq_bit, PCIE_IRNCR(pcie_port));
++	IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s irq %d assigned\n", __func__, pci_name(dev), irq);
++	return irq;
++}
++
++/** 
++ * \fn int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev)
++ * \brief Called to perform platform specific PCI setup 
++ * 
++ * \param[in] dev The Linux PCI device structure for the device to map
++ * \return OK
++ * \ingroup IFX_PCIE_OS
++ */ 
++int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev)
++{
++	u16 config;
++	unsigned int dconfig;
++	int pos;
++	/* Enable reporting System errors and parity errors on all devices */ 
++	/* Enable parity checking and error reporting */ 
++	pci_read_config_word(dev, PCI_COMMAND, &config);
++	config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR /*| PCI_COMMAND_INVALIDATE |
++	PCI_COMMAND_FAST_BACK*/;
++	pci_write_config_word(dev, PCI_COMMAND, config);
++
++	if (dev->subordinate) {
++		/* Set latency timers on sub bridges */
++		pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 0x40); /* XXX, */
++		/* More bridge error detection */
++		pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config);
++		config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR;
++		pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config);
++	}
++	/* Enable the PCIe normal error reporting */
++	pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
++	if (pos) {
++		/* Disable system error generation in response to error messages */
++		pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &config);
++		config &= ~(PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE | PCI_EXP_RTCTL_SEFEE);
++		pci_write_config_word(dev, pos + PCI_EXP_RTCTL, config);
++
++		/* Clear PCIE Capability's Device Status */
++		pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &config);
++		pci_write_config_word(dev, pos + PCI_EXP_DEVSTA, config);
++
++		/* Update Device Control */
++		pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config);
++		/* Correctable Error Reporting */
++		config |= PCI_EXP_DEVCTL_CERE;
++		/* Non-Fatal Error Reporting */
++		config |= PCI_EXP_DEVCTL_NFERE;
++		/* Fatal Error Reporting */
++		config |= PCI_EXP_DEVCTL_FERE;
++		/* Unsupported Request */
++		config |= PCI_EXP_DEVCTL_URRE;
++		pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config);
++	}
++
++	/* Find the Advanced Error Reporting capability */
++	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
++	if (pos) {
++		/* Clear Uncorrectable Error Status */
++		pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &dconfig);
++		pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, dconfig);
++		/* Enable reporting of all uncorrectable errors */
++		/* Uncorrectable Error Mask - turned on bits disable errors */
++		pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0);
++		/* 
++		 * Leave severity at HW default. This only controls if 
++		 * errors are reported as uncorrectable or 
++		 * correctable, not if the error is reported. 
++		 */
++		/* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
++		/* Clear Correctable Error Status */
++		pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig);
++		pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig);
++		/* Enable reporting of all correctable errors */
++		/* Correctable Error Mask - turned on bits disable errors */
++		pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0);
++		/* Advanced Error Capabilities */
++		pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig);
++		/* ECRC Generation Enable */
++		if (dconfig & PCI_ERR_CAP_ECRC_GENC)
++			dconfig |= PCI_ERR_CAP_ECRC_GENE;
++		/* ECRC Check Enable */
++		if (dconfig & PCI_ERR_CAP_ECRC_CHKC)
++			dconfig |= PCI_ERR_CAP_ECRC_CHKE;
++		pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig);
++
++		/* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */
++		/* Enable Root Port's interrupt in response to error messages */
++		pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND,
++			PCI_ERR_ROOT_CMD_COR_EN |
++			PCI_ERR_ROOT_CMD_NONFATAL_EN |
++			PCI_ERR_ROOT_CMD_FATAL_EN);
++		/* Clear the Root status register */
++		pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig);
++		pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
++	}
++	/* WAR, only 128 MRRS is supported, force all EPs to support this value */
++	pcie_set_readrq(dev, 128);
++	return 0;
++}
++
++static void pcie_phy_rst(int pcie_port)
++{
++	pcie_phy_rst_assert(pcie_port);
++	pcie_phy_rst_deassert(pcie_port);
++	/* Make sure PHY PLL is stable */
++	udelay(20);
++}
++
++static int pcie_rc_initialize(int pcie_port)
++{
++	int i;
++
++	pcie_rcu_endian_setup(pcie_port);
++
++	pcie_ep_gpio_rst_init(pcie_port);
++
++	/* 
++	 * XXX, PCIe elastic buffer bug will cause not to be detected. One more 
++	 * reset PCIe PHY will solve this issue 
++	 */
++	for (i = 0; i < IFX_PCIE_PHY_LOOP_CNT; i++) {
++		/* Disable PCIe PHY Analog part for sanity check */
++		pcie_phy_pmu_disable(pcie_port);
++		pcie_phy_rst(pcie_port);
++		/* PCIe Core reset enabled, low active, sw programmed */
++		pcie_core_rst_assert(pcie_port);
++		/* Put PCIe EP in reset status */
++		pcie_device_rst_assert(pcie_port);
++		/* PCI PHY & Core reset disabled, high active, sw programmed */
++		pcie_core_rst_deassert(pcie_port);
++		/* Already in a quiet state, program PLL, enable PHY, check ready bit */
++		pcie_phy_clock_mode_setup(pcie_port);
++		/* Enable PCIe PHY and Clock */
++		pcie_core_pmu_setup(pcie_port);
++		/* Clear status registers */
++		pcie_status_register_clear(pcie_port);
++#ifdef CONFIG_PCI_MSI
++		pcie_msi_init(pcie_port);
++#endif /* CONFIG_PCI_MSI */
++		pcie_rc_cfg_reg_setup(pcie_port);
++
++		/* Once link is up, break out */
++		if (pcie_app_loigc_setup(pcie_port) == 0)
++			break;
++	}
++	if (i >= IFX_PCIE_PHY_LOOP_CNT) {
++		printk(KERN_ERR "%s link up failed!!!!!\n", __func__);
++		return -EIO;
++	}
++	/* NB, don't increase ACK/NACK timer timeout value, which will cause a lot of COR errors */
++	pcie_replay_time_update(pcie_port);
++	return 0;
++}
++
++static int inline ifx_pcie_startup_port_nr(void)
++{
++	int pcie_port = IFX_PCIE_PORT0;
++
++	pcie_port = IFX_PCIE_PORT0;
++	return pcie_port;
++}
++
++/** 
++ * \fn static int __init ifx_pcie_bios_init(void)
++ * \brief Initialize the IFX PCIe controllers
++ *
++ * \return -EIO    PCIe PHY link is not up
++ * \return -ENOMEM Configuration/IO space failed to map
++ * \return 0       OK
++ * \ingroup IFX_PCIE_OS
++ */ 
++extern int (*ltqpci_plat_arch_init)(struct pci_dev *dev);
++extern int (*ltqpci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin);
++static int __devinit ltq_pcie_probe(struct platform_device *pdev)
++{
++	char ver_str[128] = {0};
++	void __iomem *io_map_base;
++	int pcie_port;
++	int startup_port;
++	ltqpci_map_irq = ifx_pcie_bios_map_irq;
++	ltqpci_plat_arch_init = ifx_pcie_bios_plat_dev_init;
++	/* Enable AHB Master/ Slave */
++	pcie_ahb_pmu_setup();
++
++	startup_port = ifx_pcie_startup_port_nr();
++
++	ltq_gpio_request(&pdev->dev, IFX_PCIE_GPIO_RESET, 0, 1, "pcie-reset");
++
++	for (pcie_port = startup_port; pcie_port < IFX_PCIE_CORE_NR; pcie_port++){
++		if (pcie_rc_initialize(pcie_port) == 0) {
++			/* Otherwise, warning will pop up */
++			io_map_base = ioremap(PCIE_IO_PHY_PORT_TO_BASE(pcie_port), PCIE_IO_SIZE);
++			if (io_map_base == NULL)
++				return -ENOMEM;
++			ifx_pcie_controller[pcie_port].pcic.io_map_base = (unsigned long)io_map_base;
++			register_pci_controller(&ifx_pcie_controller[pcie_port].pcic);
++			/* XXX, clear error status */
++			pcie_rc_core_int_init(pcie_port);
++		}
++	}
++
++	printk(KERN_INFO "%s", ver_str);
++return 0;
++}
++
++static struct platform_driver ltq_pcie_driver = {
++	.probe = ltq_pcie_probe,
++	.driver = {
++		.name = "pcie-xway",
++		.owner = THIS_MODULE,
++	},
++};
++
++int __init pciebios_init(void)
++{
++	return platform_driver_register(&ltq_pcie_driver);
++}
++
++arch_initcall(pciebios_init);
+diff --git a/arch/mips/pci/pcie-lantiq.h b/arch/mips/pci/pcie-lantiq.h
+new file mode 100644
+index 0000000..d877c23
+--- /dev/null
++++ b/arch/mips/pci/pcie-lantiq.h
+@@ -0,0 +1,1305 @@
++/******************************************************************************
++**
++** FILE NAME    : ifxmips_pcie_reg.h
++** PROJECT      : IFX UEIP for VRX200
++** MODULES      : PCIe module
++**
++** DATE         : 02 Mar 2009
++** AUTHOR       : Lei Chuanhua
++** DESCRIPTION  : PCIe Root Complex Driver
++** COPYRIGHT    :       Copyright (c) 2009
++**                      Infineon Technologies AG
++**                      Am Campeon 1-12, 85579 Neubiberg, Germany
++**
++**    This program is free software; you can redistribute it and/or modify
++**    it under the terms of the GNU General Public License as published by
++**    the Free Software Foundation; either version 2 of the License, or
++**    (at your option) any later version.
++** HISTORY
++** $Version $Date        $Author         $Comment
++** 0.0.1    17 Mar,2009  Lei Chuanhua    Initial version
++*******************************************************************************/
++#ifndef IFXMIPS_PCIE_REG_H
++#define IFXMIPS_PCIE_REG_H
++#include <linux/version.h>
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/interrupt.h>
++/*!
++ \file ifxmips_pcie_reg.h
++ \ingroup IFX_PCIE  
++ \brief header file for PCIe module register definition
++*/
++/* PCIe Address Mapping Base */
++#define PCIE_CFG_PHY_BASE        0x1D000000UL
++#define PCIE_CFG_BASE           (KSEG1 + PCIE_CFG_PHY_BASE)
++#define PCIE_CFG_SIZE           (8 * 1024 * 1024)
++
++#define PCIE_MEM_PHY_BASE        0x1C000000UL
++#define PCIE_MEM_BASE           (KSEG1 + PCIE_MEM_PHY_BASE)
++#define PCIE_MEM_SIZE           (16 * 1024 * 1024)
++#define PCIE_MEM_PHY_END        (PCIE_MEM_PHY_BASE + PCIE_MEM_SIZE - 1)
++
++#define PCIE_IO_PHY_BASE         0x1D800000UL
++#define PCIE_IO_BASE            (KSEG1 + PCIE_IO_PHY_BASE)
++#define PCIE_IO_SIZE            (1 * 1024 * 1024)
++#define PCIE_IO_PHY_END         (PCIE_IO_PHY_BASE + PCIE_IO_SIZE - 1)
++
++#define PCIE_RC_CFG_BASE        (KSEG1 + 0x1D900000)
++#define PCIE_APP_LOGIC_REG      (KSEG1 + 0x1E100900)
++#define PCIE_MSI_PHY_BASE        0x1F600000UL
++
++#define PCIE_PDI_PHY_BASE        0x1F106800UL
++#define PCIE_PDI_BASE           (KSEG1 + PCIE_PDI_PHY_BASE)
++#define PCIE_PDI_SIZE            0x400
++
++#define PCIE1_CFG_PHY_BASE        0x19000000UL
++#define PCIE1_CFG_BASE           (KSEG1 + PCIE1_CFG_PHY_BASE)
++#define PCIE1_CFG_SIZE           (8 * 1024 * 1024)
++
++#define PCIE1_MEM_PHY_BASE        0x18000000UL
++#define PCIE1_MEM_BASE           (KSEG1 + PCIE1_MEM_PHY_BASE)
++#define PCIE1_MEM_SIZE           (16 * 1024 * 1024)
++#define PCIE1_MEM_PHY_END        (PCIE1_MEM_PHY_BASE + PCIE1_MEM_SIZE - 1)
++
++#define PCIE1_IO_PHY_BASE         0x19800000UL
++#define PCIE1_IO_BASE            (KSEG1 + PCIE1_IO_PHY_BASE)
++#define PCIE1_IO_SIZE            (1 * 1024 * 1024)
++#define PCIE1_IO_PHY_END         (PCIE1_IO_PHY_BASE + PCIE1_IO_SIZE - 1)
++
++#define PCIE1_RC_CFG_BASE        (KSEG1 + 0x19900000)
++#define PCIE1_APP_LOGIC_REG      (KSEG1 + 0x1E100700)
++#define PCIE1_MSI_PHY_BASE        0x1F400000UL
++
++#define PCIE1_PDI_PHY_BASE        0x1F700400UL
++#define PCIE1_PDI_BASE           (KSEG1 + PCIE1_PDI_PHY_BASE)
++#define PCIE1_PDI_SIZE            0x400
++
++#define PCIE_CFG_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_CFG_BASE) : (PCIE_CFG_BASE))
++#define PCIE_MEM_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_MEM_BASE) : (PCIE_MEM_BASE))
++#define PCIE_IO_PORT_TO_BASE(X)      ((X) > 0 ? (PCIE1_IO_BASE) : (PCIE_IO_BASE))
++#define PCIE_MEM_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_PHY_BASE) : (PCIE_MEM_PHY_BASE))
++#define PCIE_MEM_PHY_PORT_TO_END(X)  ((X) > 0 ? (PCIE1_MEM_PHY_END) : (PCIE_MEM_PHY_END))
++#define PCIE_IO_PHY_PORT_TO_BASE(X)  ((X) > 0 ? (PCIE1_IO_PHY_BASE) : (PCIE_IO_PHY_BASE))
++#define PCIE_IO_PHY_PORT_TO_END(X)   ((X) > 0 ? (PCIE1_IO_PHY_END) : (PCIE_IO_PHY_END))
++#define PCIE_APP_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_APP_LOGIC_REG) : (PCIE_APP_LOGIC_REG))
++#define PCIE_RC_PORT_TO_BASE(X)      ((X) > 0 ? (PCIE1_RC_CFG_BASE) : (PCIE_RC_CFG_BASE))
++#define PCIE_PHY_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_PDI_BASE) : (PCIE_PDI_BASE))
++
++/* PCIe Application Logic Register */
++/* RC Core Control Register */
++#define PCIE_RC_CCR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x10)
++/* This should be enabled after initializing configuratin registers
++ * Also should check link status retraining bit
++ */
++#define PCIE_RC_CCR_LTSSM_ENABLE             0x00000001    /* Enable LTSSM to continue link establishment */
++
++/* RC Core Debug Register */
++#define PCIE_RC_DR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x14)
++#define PCIE_RC_DR_DLL_UP                    0x00000001  /* Data Link Layer Up */
++#define PCIE_RC_DR_CURRENT_POWER_STATE       0x0000000E  /* Current Power State */
++#define PCIE_RC_DR_CURRENT_POWER_STATE_S     1
++#define PCIE_RC_DR_CURRENT_LTSSM_STATE       0x000001F0  /* Current LTSSM State */
++#define PCIE_RC_DR_CURRENT_LTSSM_STATE_S     4
++
++#define PCIE_RC_DR_PM_DEV_STATE              0x00000E00  /* Power Management D-State */
++#define PCIE_RC_DR_PM_DEV_STATE_S            9
++
++#define PCIE_RC_DR_PM_ENABLED                0x00001000  /* Power Management State from PMU */
++#define PCIE_RC_DR_PME_EVENT_ENABLED         0x00002000  /* Power Management Event Enable State */
++#define PCIE_RC_DR_AUX_POWER_ENABLED         0x00004000  /* Auxiliary Power Enable */
++
++/* Current Power State Definition */
++enum {
++    PCIE_RC_DR_D0 = 0,
++    PCIE_RC_DR_D1,   /* Not supported */
++    PCIE_RC_DR_D2,   /* Not supported */
++    PCIE_RC_DR_D3,
++    PCIE_RC_DR_UN,
++};
++
++/* PHY Link Status Register */
++#define PCIE_PHY_SR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x18)
++#define PCIE_PHY_SR_PHY_LINK_UP              0x00000001   /* PHY Link Up/Down Indicator */
++
++/* Electromechanical Control Register */
++#define PCIE_EM_CR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x1C)
++#define PCIE_EM_CR_CARD_IS_PRESENT           0x00000001  /* Card Presence Detect State */
++#define PCIE_EM_CR_MRL_OPEN                  0x00000002  /* MRL Sensor State */
++#define PCIE_EM_CR_POWER_FAULT_SET           0x00000004  /* Power Fault Detected */
++#define PCIE_EM_CR_MRL_SENSOR_SET            0x00000008  /* MRL Sensor Changed */
++#define PCIE_EM_CR_PRESENT_DETECT_SET        0x00000010  /* Card Presense Detect Changed */
++#define PCIE_EM_CR_CMD_CPL_INT_SET           0x00000020  /* Command Complete Interrupt */
++#define PCIE_EM_CR_SYS_INTERLOCK_SET         0x00000040  /* System Electromechanical IterLock Engaged */
++#define PCIE_EM_CR_ATTENTION_BUTTON_SET      0x00000080  /* Attention Button Pressed */
++
++/* Interrupt Status Register */
++#define PCIE_IR_SR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x20)
++#define PCIE_IR_SR_PME_CAUSE_MSI             0x00000002  /* MSI caused by PME */
++#define PCIE_IR_SR_HP_PME_WAKE_GEN           0x00000004  /* Hotplug PME Wake Generation */
++#define PCIE_IR_SR_HP_MSI                    0x00000008  /* Hotplug MSI */
++#define PCIE_IR_SR_AHB_LU_ERR                0x00000030  /* AHB Bridge Lookup Error Signals */
++#define PCIE_IR_SR_AHB_LU_ERR_S              4
++#define PCIE_IR_SR_INT_MSG_NUM               0x00003E00  /* Interrupt Message Number */
++#define PCIE_IR_SR_INT_MSG_NUM_S             9
++#define PCIE_IR_SR_AER_INT_MSG_NUM           0xF8000000  /* Advanced Error Interrupt Message Number */
++#define PCIE_IR_SR_AER_INT_MSG_NUM_S         27
++
++/* Message Control Register */
++#define PCIE_MSG_CR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x30)
++#define PCIE_MSG_CR_GEN_PME_TURN_OFF_MSG     0x00000001  /* Generate PME Turn Off Message */
++#define PCIE_MSG_CR_GEN_UNLOCK_MSG           0x00000002  /* Generate Unlock Message */
++
++#define PCIE_VDM_DR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x34)
++
++/* Vendor-Defined Message Requester ID Register */
++#define PCIE_VDM_RID(X)                     (PCIE_APP_PORT_TO_BASE (X) + 0x38)
++#define PCIE_VDM_RID_VENROR_MSG_REQ_ID       0x0000FFFF
++#define PCIE_VDM_RID_VDMRID_S                0
++
++/* ASPM Control Register */
++#define PCIE_ASPM_CR(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x40)
++#define PCIE_ASPM_CR_HOT_RST                 0x00000001  /* Hot Reset Request to the downstream device */
++#define PCIE_ASPM_CR_REQ_EXIT_L1             0x00000002  /* Request to Exit L1 */
++#define PCIE_ASPM_CR_REQ_ENTER_L1            0x00000004  /* Request to Enter L1 */
++
++/* Vendor Message DW0 Register */
++#define PCIE_VM_MSG_DW0(X)                  (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x50)
++#define PCIE_VM_MSG_DW0_TYPE                 0x0000001F  /* Message type */
++#define PCIE_VM_MSG_DW0_TYPE_S               0
++#define PCIE_VM_MSG_DW0_FORMAT               0x00000060  /* Format */
++#define PCIE_VM_MSG_DW0_FORMAT_S             5
++#define PCIE_VM_MSG_DW0_TC                   0x00007000  /* Traffic Class */
++#define PCIE_VM_MSG_DW0_TC_S                 12
++#define PCIE_VM_MSG_DW0_ATTR                 0x000C0000  /* Atrributes */
++#define PCIE_VM_MSG_DW0_ATTR_S               18
++#define PCIE_VM_MSG_DW0_EP_TLP               0x00100000  /* Poisoned TLP */
++#define PCIE_VM_MSG_DW0_TD                   0x00200000  /* TLP Digest */
++#define PCIE_VM_MSG_DW0_LEN                  0xFFC00000  /* Length */
++#define PCIE_VM_MSG_DW0_LEN_S                22
++
++/* Format Definition */
++enum {
++    PCIE_VM_MSG_FORMAT_00 = 0,  /* 3DW Hdr, no data*/
++    PCIE_VM_MSG_FORMAT_01,      /* 4DW Hdr, no data */
++    PCIE_VM_MSG_FORMAT_10,      /* 3DW Hdr, with data */
++    PCIE_VM_MSG_FORMAT_11,      /* 4DW Hdr, with data */
++};
++
++/* Traffic Class Definition */
++enum {
++    PCIE_VM_MSG_TC0 = 0,
++    PCIE_VM_MSG_TC1,
++    PCIE_VM_MSG_TC2,
++    PCIE_VM_MSG_TC3,
++    PCIE_VM_MSG_TC4,
++    PCIE_VM_MSG_TC5,
++    PCIE_VM_MSG_TC6,
++    PCIE_VM_MSG_TC7,
++};
++
++/* Attributes Definition */
++enum {
++    PCIE_VM_MSG_ATTR_00 = 0,   /* RO and No Snoop cleared */
++    PCIE_VM_MSG_ATTR_01,       /* RO cleared , No Snoop set */
++    PCIE_VM_MSG_ATTR_10,       /* RO set, No Snoop cleared*/
++    PCIE_VM_MSG_ATTR_11,       /* RO and No Snoop set */
++};
++
++/* Payload Size Definition */
++#define PCIE_VM_MSG_LEN_MIN  0
++#define PCIE_VM_MSG_LEN_MAX  1024
++
++/* Vendor Message DW1 Register */
++#define PCIE_VM_MSG_DW1(X)                 (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x54)
++#define PCIE_VM_MSG_DW1_FUNC_NUM            0x00000070  /* Function Number */
++#define PCIE_VM_MSG_DW1_FUNC_NUM_S          8
++#define PCIE_VM_MSG_DW1_CODE                0x00FF0000  /* Message Code */
++#define PCIE_VM_MSG_DW1_CODE_S              16
++#define PCIE_VM_MSG_DW1_TAG                 0xFF000000  /* Tag */
++#define PCIE_VM_MSG_DW1_TAG_S               24
++
++#define PCIE_VM_MSG_DW2(X)                  (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x58)
++#define PCIE_VM_MSG_DW3(X)                  (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x5C)
++
++/* Vendor Message Request Register */
++#define PCIE_VM_MSG_REQR(X)                 (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x60)
++#define PCIE_VM_MSG_REQR_REQ                 0x00000001  /* Vendor Message Request */
++
++
++/* AHB Slave Side Band Control Register */
++#define PCIE_AHB_SSB(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x70)
++#define PCIE_AHB_SSB_REQ_BCM                0x00000001 /* Slave Reques BCM filed */
++#define PCIE_AHB_SSB_REQ_EP                 0x00000002 /* Slave Reques EP filed */
++#define PCIE_AHB_SSB_REQ_TD                 0x00000004 /* Slave Reques TD filed */
++#define PCIE_AHB_SSB_REQ_ATTR               0x00000018 /* Slave Reques Attribute number */
++#define PCIE_AHB_SSB_REQ_ATTR_S             3
++#define PCIE_AHB_SSB_REQ_TC                 0x000000E0 /* Slave Request TC Field */
++#define PCIE_AHB_SSB_REQ_TC_S               5
++
++/* AHB Master SideBand Ctrl Register */
++#define PCIE_AHB_MSB(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x74)
++#define PCIE_AHB_MSB_RESP_ATTR               0x00000003 /* Master Response Attribute number */
++#define PCIE_AHB_MSB_RESP_ATTR_S             0
++#define PCIE_AHB_MSB_RESP_BAD_EOT            0x00000004 /* Master Response Badeot filed */
++#define PCIE_AHB_MSB_RESP_BCM                0x00000008 /* Master Response BCM filed */
++#define PCIE_AHB_MSB_RESP_EP                 0x00000010 /* Master Response EP filed */
++#define PCIE_AHB_MSB_RESP_TD                 0x00000020 /* Master Response TD filed */
++#define PCIE_AHB_MSB_RESP_FUN_NUM            0x000003C0 /* Master Response Function number */
++#define PCIE_AHB_MSB_RESP_FUN_NUM_S          6
++
++/* AHB Control Register, fixed bus enumeration exception */
++#define PCIE_AHB_CTRL(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x78)
++#define PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS     0x00000001 
++
++/* Interrupt Enalbe Register */
++#define PCIE_IRNEN(X)                        (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF4)
++#define PCIE_IRNCR(X)                        (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF8)
++#define PCIE_IRNICR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xFC)
++
++/* PCIe interrupt enable/control/capture register definition */
++#define PCIE_IRN_AER_REPORT                 0x00000001  /* AER Interrupt */
++#define PCIE_IRN_AER_MSIX                   0x00000002  /* Advanced Error MSI-X Interrupt */
++#define PCIE_IRN_PME                        0x00000004  /* PME Interrupt */
++#define PCIE_IRN_HOTPLUG                    0x00000008  /* Hotplug Interrupt */
++#define PCIE_IRN_RX_VDM_MSG                 0x00000010  /* Vendor-Defined Message Interrupt */
++#define PCIE_IRN_RX_CORRECTABLE_ERR_MSG     0x00000020  /* Correctable Error Message Interrupt */
++#define PCIE_IRN_RX_NON_FATAL_ERR_MSG       0x00000040  /* Non-fatal Error Message */
++#define PCIE_IRN_RX_FATAL_ERR_MSG           0x00000080  /* Fatal Error Message */
++#define PCIE_IRN_RX_PME_MSG                 0x00000100  /* PME Message Interrupt */
++#define PCIE_IRN_RX_PME_TURNOFF_ACK         0x00000200  /* PME Turnoff Ack Message Interrupt */
++#define PCIE_IRN_AHB_BR_FATAL_ERR           0x00000400  /* AHB Fatal Error Interrupt */
++#define PCIE_IRN_LINK_AUTO_BW_STATUS        0x00000800  /* Link Auto Bandwidth Status Interrupt */
++#define PCIE_IRN_BW_MGT                     0x00001000  /* Bandwidth Managment Interrupt */
++#define PCIE_IRN_INTA                       0x00002000  /* INTA */
++#define PCIE_IRN_INTB                       0x00004000  /* INTB */
++#define PCIE_IRN_INTC                       0x00008000  /* INTC */
++#define PCIE_IRN_INTD                       0x00010000  /* INTD */
++#define PCIE_IRN_WAKEUP                     0x00020000  /* Wake up Interrupt */
++
++#define PCIE_RC_CORE_COMBINED_INT    (PCIE_IRN_AER_REPORT |  PCIE_IRN_AER_MSIX | PCIE_IRN_PME | \
++                                      PCIE_IRN_HOTPLUG | PCIE_IRN_RX_VDM_MSG | PCIE_IRN_RX_CORRECTABLE_ERR_MSG |\
++                                      PCIE_IRN_RX_NON_FATAL_ERR_MSG | PCIE_IRN_RX_FATAL_ERR_MSG | \
++                                      PCIE_IRN_RX_PME_MSG | PCIE_IRN_RX_PME_TURNOFF_ACK | PCIE_IRN_AHB_BR_FATAL_ERR | \
++                                      PCIE_IRN_LINK_AUTO_BW_STATUS | PCIE_IRN_BW_MGT)
++/* PCIe RC Configuration Register */
++#define PCIE_VDID(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x00)
++
++/* Bit definition from pci_reg.h */
++#define PCIE_PCICMDSTS(X)           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x04)
++#define PCIE_CCRID(X)               (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x08)
++#define PCIE_CLSLTHTBR(X)           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x0C) /* EP only */
++/* BAR0, BAR1,Only necessary if the bridges implements a device-specific register set or memory buffer */
++#define PCIE_BAR0(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10) /* Not used*/
++#define PCIE_BAR1(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14) /* Not used */
++
++#define PCIE_BNR(X)                 (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x18) /* Mandatory */
++/* Bus Number Register bits */
++#define PCIE_BNR_PRIMARY_BUS_NUM             0x000000FF
++#define PCIE_BNR_PRIMARY_BUS_NUM_S           0
++#define PCIE_PNR_SECONDARY_BUS_NUM           0x0000FF00
++#define PCIE_PNR_SECONDARY_BUS_NUM_S         8
++#define PCIE_PNR_SUB_BUS_NUM                 0x00FF0000
++#define PCIE_PNR_SUB_BUS_NUM_S               16
++
++/* IO Base/Limit Register bits */
++#define PCIE_IOBLSECS(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x1C)  /* RC only */
++#define PCIE_IOBLSECS_32BIT_IO_ADDR             0x00000001
++#define PCIE_IOBLSECS_IO_BASE_ADDR              0x000000F0
++#define PCIE_IOBLSECS_IO_BASE_ADDR_S            4
++#define PCIE_IOBLSECS_32BIT_IOLIMT              0x00000100
++#define PCIE_IOBLSECS_IO_LIMIT_ADDR             0x0000F000
++#define PCIE_IOBLSECS_IO_LIMIT_ADDR_S           12
++
++/* Non-prefetchable Memory Base/Limit Register bit */
++#define PCIE_MBML(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x20)  /* RC only */
++#define PCIE_MBML_MEM_BASE_ADDR                 0x0000FFF0
++#define PCIE_MBML_MEM_BASE_ADDR_S               4
++#define PCIE_MBML_MEM_LIMIT_ADDR                0xFFF00000
++#define PCIE_MBML_MEM_LIMIT_ADDR_S              20
++
++/* Prefetchable Memory Base/Limit Register bit */
++#define PCIE_PMBL(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x24)  /* RC only */
++#define PCIE_PMBL_64BIT_ADDR                    0x00000001
++#define PCIE_PMBL_UPPER_12BIT                   0x0000FFF0
++#define PCIE_PMBL_UPPER_12BIT_S                 4
++#define PCIE_PMBL_E64MA                         0x00010000
++#define PCIE_PMBL_END_ADDR                      0xFFF00000
++#define PCIE_PMBL_END_ADDR_S                    20
++#define PCIE_PMBU32(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x28)  /* RC only */
++#define PCIE_PMLU32(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x2C)  /* RC only */
++
++/* I/O Base/Limit Upper 16 bits register */
++#define PCIE_IO_BANDL(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x30)  /* RC only */
++#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE        0x0000FFFF
++#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE_S      0
++#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT       0xFFFF0000
++#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT_S     16
++
++#define PCIE_CPR(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x34)
++#define PCIE_EBBAR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x38)
++
++/* Interrupt and Secondary Bridge Control Register */
++#define PCIE_INTRBCTRL(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x3C)
++
++#define PCIE_INTRBCTRL_INT_LINE                 0x000000FF
++#define PCIE_INTRBCTRL_INT_LINE_S               0
++#define PCIE_INTRBCTRL_INT_PIN                  0x0000FF00
++#define PCIE_INTRBCTRL_INT_PIN_S                8
++#define PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE   0x00010000    /* #PERR */
++#define PCIE_INTRBCTRL_SERR_ENABLE              0x00020000    /* #SERR */
++#define PCIE_INTRBCTRL_ISA_ENABLE               0x00040000    /* ISA enable, IO 64KB only */
++#define PCIE_INTRBCTRL_VGA_ENABLE               0x00080000    /* VGA enable */
++#define PCIE_INTRBCTRL_VGA_16BIT_DECODE         0x00100000    /* VGA 16bit decode */
++#define PCIE_INTRBCTRL_RST_SECONDARY_BUS        0x00400000    /* Secondary bus rest, hot rest, 1ms */
++/* Others are read only */
++enum {
++    PCIE_INTRBCTRL_INT_NON = 0,
++    PCIE_INTRBCTRL_INTA,
++    PCIE_INTRBCTRL_INTB,
++    PCIE_INTRBCTRL_INTC,
++    PCIE_INTRBCTRL_INTD,
++};
++
++#define PCIE_PM_CAPR(X)                  (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x40)
++
++/* Power Management Control and Status Register */
++#define PCIE_PM_CSR(X)                   (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x44)
++
++#define PCIE_PM_CSR_POWER_STATE           0x00000003   /* Power State */
++#define PCIE_PM_CSR_POWER_STATE_S         0
++#define PCIE_PM_CSR_SW_RST                0x00000008   /* Soft Reset Enabled */
++#define PCIE_PM_CSR_PME_ENABLE            0x00000100   /* PME Enable */
++#define PCIE_PM_CSR_PME_STATUS            0x00008000   /* PME status */
++
++/* MSI Capability Register for EP */
++#define PCIE_MCAPR(X)                    (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x50)
++
++#define PCIE_MCAPR_MSI_CAP_ID             0x000000FF  /* MSI Capability ID */
++#define PCIE_MCAPR_MSI_CAP_ID_S           0
++#define PCIE_MCAPR_MSI_NEXT_CAP_PTR       0x0000FF00  /* Next Capability Pointer */
++#define PCIE_MCAPR_MSI_NEXT_CAP_PTR_S     8
++#define PCIE_MCAPR_MSI_ENABLE             0x00010000  /* MSI Enable */
++#define PCIE_MCAPR_MULTI_MSG_CAP          0x000E0000  /* Multiple Message Capable */
++#define PCIE_MCAPR_MULTI_MSG_CAP_S        17
++#define PCIE_MCAPR_MULTI_MSG_ENABLE       0x00700000  /* Multiple Message Enable */
++#define PCIE_MCAPR_MULTI_MSG_ENABLE_S     20
++#define PCIE_MCAPR_ADDR64_CAP             0X00800000  /* 64-bit Address Capable */
++
++/* MSI Message Address Register */
++#define PCIE_MA(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x54)
++
++#define PCIE_MA_ADDR_MASK                 0xFFFFFFFC  /* Message Address */
++
++/* MSI Message Upper Address Register */
++#define PCIE_MUA(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x58)
++
++/* MSI Message Data Register */
++#define PCIE_MD(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x5C)
++
++#define PCIE_MD_DATA                      0x0000FFFF  /* Message Data */
++#define PCIE_MD_DATA_S                    0
++
++/* PCI Express Capability Register */
++#define PCIE_XCAP(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70)
++
++#define PCIE_XCAP_ID                      0x000000FF  /* PCI Express Capability ID */
++#define PCIE_XCAP_ID_S                    0
++#define PCIE_XCAP_NEXT_CAP                0x0000FF00  /* Next Capability Pointer */
++#define PCIE_XCAP_NEXT_CAP_S              8
++#define PCIE_XCAP_VER                     0x000F0000  /* PCI Express Capability Version */
++#define PCIE_XCAP_VER_S                   16
++#define PCIE_XCAP_DEV_PORT_TYPE           0x00F00000  /* Device Port Type */
++#define PCIE_XCAP_DEV_PORT_TYPE_S         20
++#define PCIE_XCAP_SLOT_IMPLEMENTED        0x01000000  /* Slot Implemented */
++#define PCIE_XCAP_MSG_INT_NUM             0x3E000000  /* Interrupt Message Number */
++#define PCIE_XCAP_MSG_INT_NUM_S           25
++
++/* Device Capability Register */
++#define PCIE_DCAP(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74)
++
++#define PCIE_DCAP_MAX_PAYLOAD_SIZE        0x00000007   /* Max Payload size */
++#define PCIE_DCAP_MAX_PAYLOAD_SIZE_S      0
++#define PCIE_DCAP_PHANTOM_FUNC            0x00000018   /* Phanton Function, not supported */
++#define PCIE_DCAP_PHANTOM_FUNC_S          3
++#define PCIE_DCAP_EXT_TAG                 0x00000020   /* Extended Tag Field */
++#define PCIE_DCAP_EP_L0S_LATENCY          0x000001C0   /* EP L0s latency only */
++#define PCIE_DCAP_EP_L0S_LATENCY_S        6
++#define PCIE_DCAP_EP_L1_LATENCY           0x00000E00   /* EP L1 latency only */
++#define PCIE_DCAP_EP_L1_LATENCY_S         9
++#define PCIE_DCAP_ROLE_BASE_ERR_REPORT    0x00008000   /* Role Based ERR */
++
++/* Maximum payload size supported */
++enum {
++    PCIE_MAX_PAYLOAD_128 = 0,
++    PCIE_MAX_PAYLOAD_256,
++    PCIE_MAX_PAYLOAD_512,
++    PCIE_MAX_PAYLOAD_1024,
++    PCIE_MAX_PAYLOAD_2048,
++    PCIE_MAX_PAYLOAD_4096,
++};
++
++/* Device Control and Status Register */
++#define PCIE_DCTLSTS(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x78)
++
++#define PCIE_DCTLSTS_CORRECTABLE_ERR_EN        0x00000001   /* COR-ERR */
++#define PCIE_DCTLSTS_NONFATAL_ERR_EN           0x00000002   /* Non-fatal ERR */
++#define PCIE_DCTLSTS_FATAL_ERR_EN              0x00000004   /* Fatal ERR */
++#define PCIE_DCTLSYS_UR_REQ_EN                 0x00000008   /* UR ERR */
++#define PCIE_DCTLSTS_RELAXED_ORDERING_EN       0x00000010   /* Enable relaxing ordering */
++#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE          0x000000E0   /* Max payload mask */
++#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE_S        5
++#define PCIE_DCTLSTS_EXT_TAG_EN                0x00000100   /* Extended tag field */
++#define PCIE_DCTLSTS_PHANTOM_FUNC_EN           0x00000200   /* Phantom Function Enable */
++#define PCIE_DCTLSTS_AUX_PM_EN                 0x00000400   /* AUX Power PM Enable */
++#define PCIE_DCTLSTS_NO_SNOOP_EN               0x00000800   /* Enable no snoop, except root port*/
++#define PCIE_DCTLSTS_MAX_READ_SIZE             0x00007000   /* Max Read Request size*/
++#define PCIE_DCTLSTS_MAX_READ_SIZE_S           12
++#define PCIE_DCTLSTS_CORRECTABLE_ERR           0x00010000   /* COR-ERR Detected */
++#define PCIE_DCTLSTS_NONFATAL_ERR              0x00020000   /* Non-Fatal ERR Detected */
++#define PCIE_DCTLSTS_FATAL_ER                  0x00040000   /* Fatal ERR Detected */
++#define PCIE_DCTLSTS_UNSUPPORTED_REQ           0x00080000   /* UR Detected */
++#define PCIE_DCTLSTS_AUX_POWER                 0x00100000   /* Aux Power Detected */
++#define PCIE_DCTLSTS_TRANSACT_PENDING          0x00200000   /* Transaction pending */
++
++#define PCIE_DCTLSTS_ERR_EN      (PCIE_DCTLSTS_CORRECTABLE_ERR_EN | \
++                                  PCIE_DCTLSTS_NONFATAL_ERR_EN | PCIE_DCTLSTS_FATAL_ERR_EN | \
++                                  PCIE_DCTLSYS_UR_REQ_EN)
++
++/* Link Capability Register */
++#define PCIE_LCAP(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7C)
++#define PCIE_LCAP_MAX_LINK_SPEED               0x0000000F  /* Max link speed, 0x1 by default */
++#define PCIE_LCAP_MAX_LINK_SPEED_S             0
++#define PCIE_LCAP_MAX_LENGTH_WIDTH             0x000003F0  /* Maxium Length Width */
++#define PCIE_LCAP_MAX_LENGTH_WIDTH_S           4
++#define PCIE_LCAP_ASPM_LEVEL                   0x00000C00  /* Active State Link PM Support */
++#define PCIE_LCAP_ASPM_LEVEL_S                 10
++#define PCIE_LCAP_L0S_EIXT_LATENCY             0x00007000  /* L0s Exit Latency */
++#define PCIE_LCAP_L0S_EIXT_LATENCY_S           12
++#define PCIE_LCAP_L1_EXIT_LATENCY              0x00038000  /* L1 Exit Latency */
++#define PCIE_LCAP_L1_EXIT_LATENCY_S            15
++#define PCIE_LCAP_CLK_PM                       0x00040000  /* Clock Power Management */
++#define PCIE_LCAP_SDER                         0x00080000  /* Surprise Down Error Reporting */
++#define PCIE_LCAP_DLL_ACTIVE_REPROT            0x00100000  /* Data Link Layer Active Reporting Capable */
++#define PCIE_LCAP_PORT_NUM                     0xFF0000000  /* Port number */
++#define PCIE_LCAP_PORT_NUM_S                   24
++
++/* Maximum Length width definition */
++#define PCIE_MAX_LENGTH_WIDTH_RES  0x00
++#define PCIE_MAX_LENGTH_WIDTH_X1   0x01  /* Default */
++#define PCIE_MAX_LENGTH_WIDTH_X2   0x02
++#define PCIE_MAX_LENGTH_WIDTH_X4   0x04
++#define PCIE_MAX_LENGTH_WIDTH_X8   0x08
++#define PCIE_MAX_LENGTH_WIDTH_X12  0x0C
++#define PCIE_MAX_LENGTH_WIDTH_X16  0x10
++#define PCIE_MAX_LENGTH_WIDTH_X32  0x20
++
++/* Active State Link PM definition */
++enum {
++    PCIE_ASPM_RES0                = 0,
++    PCIE_ASPM_L0S_ENTRY_SUPPORT,        /* L0s */
++    PCIE_ASPM_RES1,
++    PCIE_ASPM_L0S_L1_ENTRY_SUPPORT,     /* L0s and L1, default */
++};
++
++/* L0s Exit Latency definition */
++enum {
++    PCIE_L0S_EIXT_LATENCY_L64NS    = 0, /* < 64 ns */
++    PCIE_L0S_EIXT_LATENCY_B64A128,      /* > 64 ns < 128 ns */
++    PCIE_L0S_EIXT_LATENCY_B128A256,     /* > 128 ns < 256 ns */
++    PCIE_L0S_EIXT_LATENCY_B256A512,     /* > 256 ns < 512 ns */
++    PCIE_L0S_EIXT_LATENCY_B512TO1U,     /* > 512 ns < 1 us */
++    PCIE_L0S_EIXT_LATENCY_B1A2U,        /* > 1 us < 2 us */
++    PCIE_L0S_EIXT_LATENCY_B2A4U,        /* > 2 us < 4 us */
++    PCIE_L0S_EIXT_LATENCY_M4US,         /* > 4 us  */
++};
++
++/* L1 Exit Latency definition */
++enum {
++    PCIE_L1_EXIT_LATENCY_L1US  = 0,  /* < 1 us */
++    PCIE_L1_EXIT_LATENCY_B1A2,       /* > 1 us < 2 us */
++    PCIE_L1_EXIT_LATENCY_B2A4,       /* > 2 us < 4 us */
++    PCIE_L1_EXIT_LATENCY_B4A8,       /* > 4 us < 8 us */
++    PCIE_L1_EXIT_LATENCY_B8A16,      /* > 8 us < 16 us */
++    PCIE_L1_EXIT_LATENCY_B16A32,     /* > 16 us < 32 us */
++    PCIE_L1_EXIT_LATENCY_B32A64,     /* > 32 us < 64 us */
++    PCIE_L1_EXIT_LATENCY_M64US,      /* > 64 us */
++};
++
++/* Link Control and Status Register */
++#define PCIE_LCTLSTS(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x80)
++#define PCIE_LCTLSTS_ASPM_ENABLE            0x00000003  /* Active State Link PM Control */
++#define PCIE_LCTLSTS_ASPM_ENABLE_S          0
++#define PCIE_LCTLSTS_RCB128                 0x00000008  /* Read Completion Boundary 128*/
++#define PCIE_LCTLSTS_LINK_DISABLE           0x00000010  /* Link Disable */
++#define PCIE_LCTLSTS_RETRIAN_LINK           0x00000020  /* Retrain Link */
++#define PCIE_LCTLSTS_COM_CLK_CFG            0x00000040  /* Common Clock Configuration */
++#define PCIE_LCTLSTS_EXT_SYNC               0x00000080  /* Extended Synch */
++#define PCIE_LCTLSTS_CLK_PM_EN              0x00000100  /* Enable Clock Powerm Management */
++#define PCIE_LCTLSTS_LINK_SPEED             0x000F0000  /* Link Speed */
++#define PCIE_LCTLSTS_LINK_SPEED_S           16
++#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH  0x03F00000  /* Negotiated Link Width */
++#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH_S 20
++#define PCIE_LCTLSTS_RETRAIN_PENDING        0x08000000  /* Link training is ongoing */
++#define PCIE_LCTLSTS_SLOT_CLK_CFG           0x10000000  /* Slot Clock Configuration */
++#define PCIE_LCTLSTS_DLL_ACTIVE             0x20000000  /* Data Link Layer Active */
++
++/* Slot Capabilities Register */
++#define PCIE_SLCAP(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x84)
++
++/* Slot Capabilities */
++#define PCIE_SLCTLSTS(X)                    (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x88)
++
++/* Root Control and Capability Register */
++#define PCIE_RCTLCAP(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x8C)
++#define PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR  0x00000001   /* #SERR on COR-ERR */
++#define PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR     0x00000002   /* #SERR on Non-Fatal ERR */
++#define PCIE_RCTLCAP_SERR_ON_FATAL_ERR        0x00000004   /* #SERR on Fatal ERR */
++#define PCIE_RCTLCAP_PME_INT_EN               0x00000008   /* PME Interrupt Enable */
++#define PCIE_RCTLCAP_SERR_ENABLE    (PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR | \
++                                     PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR | PCIE_RCTLCAP_SERR_ON_FATAL_ERR)
++/* Root Status Register */
++#define PCIE_RSTS(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x90)
++#define PCIE_RSTS_PME_REQ_ID                   0x0000FFFF   /* PME Request ID */
++#define PCIE_RSTS_PME_REQ_ID_S                 0
++#define PCIE_RSTS_PME_STATUS                   0x00010000   /* PME Status */
++#define PCIE_RSTS_PME_PENDING                  0x00020000   /* PME Pending */
++
++/* PCI Express Enhanced Capability Header */
++#define PCIE_ENHANCED_CAP(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x100)
++#define PCIE_ENHANCED_CAP_ID                 0x0000FFFF  /* PCI Express Extended Capability ID */
++#define PCIE_ENHANCED_CAP_ID_S               0
++#define PCIE_ENHANCED_CAP_VER                0x000F0000  /* Capability Version */
++#define PCIE_ENHANCED_CAP_VER_S              16
++#define PCIE_ENHANCED_CAP_NEXT_OFFSET        0xFFF00000  /* Next Capability Offset */
++#define PCIE_ENHANCED_CAP_NEXT_OFFSET_S      20
++
++/* Uncorrectable Error Status Register */
++#define PCIE_UES_R(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x104)
++#define PCIE_DATA_LINK_PROTOCOL_ERR          0x00000010  /* Data Link Protocol Error Status */
++#define PCIE_SURPRISE_DOWN_ERROR             0x00000020  /* Surprise Down Error Status */
++#define PCIE_POISONED_TLP                    0x00001000  /* Poisoned TLP Status */
++#define PCIE_FC_PROTOCOL_ERR                 0x00002000  /* Flow Control Protocol Error Status */
++#define PCIE_COMPLETION_TIMEOUT              0x00004000  /* Completion Timeout Status */
++#define PCIE_COMPLETOR_ABORT                 0x00008000  /* Completer Abort Error */
++#define PCIE_UNEXPECTED_COMPLETION           0x00010000  /* Unexpected Completion Status */
++#define PCIE_RECEIVER_OVERFLOW               0x00020000  /* Receive Overflow Status */
++#define PCIE_MALFORNED_TLP                   0x00040000  /* Malformed TLP Stauts */
++#define PCIE_ECRC_ERR                        0x00080000  /* ECRC Error Stauts */
++#define PCIE_UR_REQ                          0x00100000  /* Unsupported Request Error Status */
++#define PCIE_ALL_UNCORRECTABLE_ERR    (PCIE_DATA_LINK_PROTOCOL_ERR | PCIE_SURPRISE_DOWN_ERROR | \
++                         PCIE_POISONED_TLP | PCIE_FC_PROTOCOL_ERR | PCIE_COMPLETION_TIMEOUT |   \
++                         PCIE_COMPLETOR_ABORT | PCIE_UNEXPECTED_COMPLETION | PCIE_RECEIVER_OVERFLOW |\
++                         PCIE_MALFORNED_TLP | PCIE_ECRC_ERR | PCIE_UR_REQ)
++
++/* Uncorrectable Error Mask Register, Mask means no report */
++#define PCIE_UEMR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x108)
++
++/* Uncorrectable Error Severity Register */
++#define PCIE_UESR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10C)
++
++/* Correctable Error Status Register */
++#define PCIE_CESR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x110)
++#define PCIE_RX_ERR                          0x00000001  /* Receive Error Status */
++#define PCIE_BAD_TLP                         0x00000040  /* Bad TLP Status */
++#define PCIE_BAD_DLLP                        0x00000080  /* Bad DLLP Status */
++#define PCIE_REPLAY_NUM_ROLLOVER             0x00000100  /* Replay Number Rollover Status */
++#define PCIE_REPLAY_TIMER_TIMEOUT_ERR        0x00001000  /* Reply Timer Timeout Status */
++#define PCIE_ADVISORY_NONFTAL_ERR            0x00002000  /* Advisory Non-Fatal Error Status */
++#define PCIE_CORRECTABLE_ERR        (PCIE_RX_ERR | PCIE_BAD_TLP | PCIE_BAD_DLLP | PCIE_REPLAY_NUM_ROLLOVER |\
++                                     PCIE_REPLAY_TIMER_TIMEOUT_ERR | PCIE_ADVISORY_NONFTAL_ERR)
++
++/* Correctable Error Mask Register */
++#define PCIE_CEMR(X)                        (volatile u32*)(PCIE_RC_CFG_BASE + 0x114)
++
++/* Advanced Error Capabilities and Control Register */
++#define PCIE_AECCR(X)                       (volatile u32*)(PCIE_RC_CFG_BASE + 0x118)
++#define PCIE_AECCR_FIRST_ERR_PTR            0x0000001F  /* First Error Pointer */
++#define PCIE_AECCR_FIRST_ERR_PTR_S          0
++#define PCIE_AECCR_ECRC_GEN_CAP             0x00000020  /* ECRC Generation Capable */
++#define PCIE_AECCR_ECRC_GEN_EN              0x00000040  /* ECRC Generation Enable */
++#define PCIE_AECCR_ECRC_CHECK_CAP           0x00000080  /* ECRC Check Capable */
++#define PCIE_AECCR_ECRC_CHECK_EN            0x00000100  /* ECRC Check Enable */
++
++/* Header Log Register 1 */
++#define PCIE_HLR1(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x11C)
++
++/* Header Log Register 2 */
++#define PCIE_HLR2(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x120)
++
++/* Header Log Register 3 */
++#define PCIE_HLR3(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x124)
++
++/* Header Log Register 4 */
++#define PCIE_HLR4(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x128)
++
++/* Root Error Command Register */
++#define PCIE_RECR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x12C)
++#define PCIE_RECR_CORRECTABLE_ERR_REPORT_EN  0x00000001 /* COR-ERR */
++#define PCIE_RECR_NONFATAL_ERR_REPORT_EN     0x00000002 /* Non-Fatal ERR */
++#define PCIE_RECR_FATAL_ERR_REPORT_EN        0x00000004 /* Fatal ERR */
++#define PCIE_RECR_ERR_REPORT_EN  (PCIE_RECR_CORRECTABLE_ERR_REPORT_EN | \
++                PCIE_RECR_NONFATAL_ERR_REPORT_EN | PCIE_RECR_FATAL_ERR_REPORT_EN)
++
++/* Root Error Status Register */
++#define PCIE_RESR(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x130)
++#define PCIE_RESR_CORRECTABLE_ERR                0x00000001   /* COR-ERR Receveid */
++#define PCIE_RESR_MULTI_CORRECTABLE_ERR          0x00000002   /* Multiple COR-ERR Received */
++#define PCIE_RESR_FATAL_NOFATAL_ERR              0x00000004   /* ERR Fatal/Non-Fatal Received */
++#define PCIE_RESR_MULTI_FATAL_NOFATAL_ERR        0x00000008   /* Multiple ERR Fatal/Non-Fatal Received */
++#define PCIE_RESR_FIRST_UNCORRECTABLE_FATAL_ERR  0x00000010   /* First UN-COR Fatal */
++#define PCIR_RESR_NON_FATAL_ERR                  0x00000020   /* Non-Fatal Error Message Received */
++#define PCIE_RESR_FATAL_ERR                      0x00000040   /* Fatal Message Received */
++#define PCIE_RESR_AER_INT_MSG_NUM                0xF8000000   /* Advanced Error Interrupt Message Number */
++#define PCIE_RESR_AER_INT_MSG_NUM_S              27
++
++/* Error Source Indentification Register */
++#define PCIE_ESIR(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x134)
++#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID         0x0000FFFF
++#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID_S       0
++#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID         0xFFFF0000
++#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID_S       16
++
++/* VC Enhanced Capability Header */
++#define PCIE_VC_ECH(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x140)
++
++/* Port VC Capability Register */
++#define PCIE_PVC1(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x144)
++#define PCIE_PVC1_EXT_VC_CNT                    0x00000007  /* Extended VC Count */
++#define PCIE_PVC1_EXT_VC_CNT_S                  0
++#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT            0x00000070  /* Low Priority Extended VC Count */
++#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT_S          4
++#define PCIE_PVC1_REF_CLK                       0x00000300  /* Reference Clock */
++#define PCIE_PVC1_REF_CLK_S                     8
++#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE       0x00000C00  /* Port Arbitration Table Entry Size */
++#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE_S     10
++
++/* Extended Virtual Channel Count Defintion */
++#define PCIE_EXT_VC_CNT_MIN   0
++#define PCIE_EXT_VC_CNT_MAX   7
++
++/* Port Arbitration Table Entry Size Definition */
++enum {
++    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S1BIT = 0,
++    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S2BIT,
++    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S4BIT,
++    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S8BIT,
++};
++
++/* Port VC Capability Register 2 */
++#define PCIE_PVC2(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x148)
++#define PCIE_PVC2_VC_ARB_16P_FIXED_WRR      0x00000001  /* HW Fixed arbitration, 16 phase WRR */
++#define PCIE_PVC2_VC_ARB_32P_WRR            0x00000002  /* 32 phase WRR */
++#define PCIE_PVC2_VC_ARB_64P_WRR            0x00000004  /* 64 phase WRR */
++#define PCIE_PVC2_VC_ARB_128P_WRR           0x00000008  /* 128 phase WRR */
++#define PCIE_PVC2_VC_ARB_WRR                0x0000000F
++#define PCIE_PVC2_VC_ARB_TAB_OFFSET         0xFF000000  /* VC arbitration table offset, not support */
++#define PCIE_PVC2_VC_ARB_TAB_OFFSET_S       24
++
++/* Port VC Control and Status Register */     
++#define PCIE_PVCCRSR(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14C)
++#define PCIE_PVCCRSR_LOAD_VC_ARB_TAB         0x00000001  /* Load VC Arbitration Table */
++#define PCIE_PVCCRSR_VC_ARB_SEL              0x0000000E  /* VC Arbitration Select */
++#define PCIE_PVCCRSR_VC_ARB_SEL_S            1
++#define PCIE_PVCCRSR_VC_ARB_TAB_STATUS       0x00010000  /* Arbitration Status */
++
++/* VC0 Resource Capability Register */
++#define PCIE_VC0_RC(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x150)
++#define PCIE_VC0_RC_PORT_ARB_HW_FIXED        0x00000001  /* HW Fixed arbitration */
++#define PCIE_VC0_RC_PORT_ARB_32P_WRR         0x00000002  /* 32 phase WRR */
++#define PCIE_VC0_RC_PORT_ARB_64P_WRR         0x00000004  /* 64 phase WRR */
++#define PCIE_VC0_RC_PORT_ARB_128P_WRR        0x00000008  /* 128 phase WRR */
++#define PCIE_VC0_RC_PORT_ARB_TM_128P_WRR     0x00000010  /* Time-based 128 phase WRR */
++#define PCIE_VC0_RC_PORT_ARB_TM_256P_WRR     0x00000020  /* Time-based 256 phase WRR */
++#define PCIE_VC0_RC_PORT_ARB          (PCIE_VC0_RC_PORT_ARB_HW_FIXED | PCIE_VC0_RC_PORT_ARB_32P_WRR |\
++                        PCIE_VC0_RC_PORT_ARB_64P_WRR | PCIE_VC0_RC_PORT_ARB_128P_WRR | \
++                        PCIE_VC0_RC_PORT_ARB_TM_128P_WRR | PCIE_VC0_RC_PORT_ARB_TM_256P_WRR)
++
++#define PCIE_VC0_RC_REJECT_SNOOP             0x00008000  /* Reject Snoop Transactioin */
++#define PCIE_VC0_RC_MAX_TIMESLOTS            0x007F0000  /* Maximum time Slots */
++#define PCIE_VC0_RC_MAX_TIMESLOTS_S          16
++#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET      0xFF000000  /* Port Arbitration Table Offset */
++#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET_S    24
++
++/* VC0 Resource Control Register */
++#define PCIE_VC0_RC0(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x154)
++#define PCIE_VC0_RC0_TVM0                    0x00000001  /* TC0 and VC0 */
++#define PCIE_VC0_RC0_TVM1                    0x00000002  /* TC1 and VC1 */
++#define PCIE_VC0_RC0_TVM2                    0x00000004  /* TC2 and VC2 */
++#define PCIE_VC0_RC0_TVM3                    0x00000008  /* TC3 and VC3 */
++#define PCIE_VC0_RC0_TVM4                    0x00000010  /* TC4 and VC4 */
++#define PCIE_VC0_RC0_TVM5                    0x00000020  /* TC5 and VC5 */
++#define PCIE_VC0_RC0_TVM6                    0x00000040  /* TC6 and VC6 */
++#define PCIE_VC0_RC0_TVM7                    0x00000080  /* TC7 and VC7 */
++#define PCIE_VC0_RC0_TC_VC                   0x000000FF  /* TC/VC mask */
++
++#define PCIE_VC0_RC0_LOAD_PORT_ARB_TAB       0x00010000  /* Load Port Arbitration Table */
++#define PCIE_VC0_RC0_PORT_ARB_SEL            0x000E0000  /* Port Arbitration Select */
++#define PCIE_VC0_RC0_PORT_ARB_SEL_S          17
++#define PCIE_VC0_RC0_VC_ID                   0x07000000  /* VC ID */
++#define PCIE_VC0_RC0_VC_ID_S                 24
++#define PCIE_VC0_RC0_VC_EN                   0x80000000  /* VC Enable */
++
++/* VC0 Resource Status Register */
++#define PCIE_VC0_RSR0(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x158)
++#define PCIE_VC0_RSR0_PORT_ARB_TAB_STATUS    0x00010000  /* Port Arbitration Table Status,not used */
++#define PCIE_VC0_RSR0_VC_NEG_PENDING         0x00020000  /* VC Negotiation Pending */
++
++/* Ack Latency Timer and Replay Timer Register */
++#define PCIE_ALTRT(X)                         (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x700)
++#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT   0x0000FFFF  /* Round Trip Latency Time Limit */
++#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT_S 0
++#define PCIE_ALTRT_REPLAY_TIME_LIMIT          0xFFFF0000  /* Replay Time Limit */
++#define PCIE_ALTRT_REPLAY_TIME_LIMIT_S        16
++
++/* Other Message Register */
++#define PCIE_OMR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x704)
++
++/* Port Force Link Register */
++#define PCIE_PFLR(X)                         (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x708)
++#define PCIE_PFLR_LINK_NUM                   0x000000FF  /* Link Number */
++#define PCIE_PFLR_LINK_NUM_S                 0
++#define PCIE_PFLR_FORCE_LINK                 0x00008000  /* Force link */
++#define PCIE_PFLR_LINK_STATE                 0x003F0000  /* Link State */
++#define PCIE_PFLR_LINK_STATE_S               16
++#define PCIE_PFLR_LOW_POWER_ENTRY_CNT        0xFF000000  /* Low Power Entrance Count, only for EP */
++#define PCIE_PFLR_LOW_POWER_ENTRY_CNT_S      24
++
++/* Ack Frequency Register */
++#define PCIE_AFR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70C)
++#define PCIE_AFR_AF                          0x000000FF  /* Ack Frequency */
++#define PCIE_AFR_AF_S                        0
++#define PCIE_AFR_FTS_NUM                     0x0000FF00  /* The number of Fast Training Sequence from L0S to L0 */
++#define PCIE_AFR_FTS_NUM_S                   8
++#define PCIE_AFR_COM_FTS_NUM                 0x00FF0000  /* N_FTS; when common clock is used*/
++#define PCIE_AFR_COM_FTS_NUM_S               16
++#define PCIE_AFR_L0S_ENTRY_LATENCY           0x07000000  /* L0s Entrance Latency */
++#define PCIE_AFR_L0S_ENTRY_LATENCY_S         24
++#define PCIE_AFR_L1_ENTRY_LATENCY            0x38000000  /* L1 Entrance Latency */
++#define PCIE_AFR_L1_ENTRY_LATENCY_S          27
++#define PCIE_AFR_FTS_NUM_DEFAULT             32
++#define PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT   7
++#define PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT    5
++
++/* Port Link Control Register */
++#define PCIE_PLCR(X)                         (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x710)
++#define PCIE_PLCR_OTHER_MSG_REQ              0x00000001  /* Other Message Request */
++#define PCIE_PLCR_SCRAMBLE_DISABLE           0x00000002  /* Scramble Disable */  
++#define PCIE_PLCR_LOOPBACK_EN                0x00000004  /* Loopback Enable */
++#define PCIE_PLCR_LTSSM_HOT_RST              0x00000008  /* Force LTSSM to the hot reset */
++#define PCIE_PLCR_DLL_LINK_EN                0x00000020  /* Enable Link initialization */
++#define PCIE_PLCR_FAST_LINK_SIM_EN           0x00000080  /* Sets all internal timers to fast mode for simulation purposes */
++#define PCIE_PLCR_LINK_MODE                  0x003F0000  /* Link Mode Enable Mask */
++#define PCIE_PLCR_LINK_MODE_S                16
++#define PCIE_PLCR_CORRUPTED_CRC_EN           0x02000000  /* Enabled Corrupt CRC */
++
++/* Lane Skew Register */
++#define PCIE_LSR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x714)
++#define PCIE_LSR_LANE_SKEW_NUM               0x00FFFFFF  /* Insert Lane Skew for Transmit, not applicable */
++#define PCIE_LSR_LANE_SKEW_NUM_S             0
++#define PCIE_LSR_FC_DISABLE                  0x01000000  /* Disable of Flow Control */
++#define PCIE_LSR_ACKNAK_DISABLE              0x02000000  /* Disable of Ack/Nak */
++#define PCIE_LSR_LANE_DESKEW_DISABLE         0x80000000  /* Disable of Lane-to-Lane Skew */
++
++/* Symbol Number Register */
++#define PCIE_SNR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x718)
++#define PCIE_SNR_TS                          0x0000000F  /* Number of TS Symbol */
++#define PCIE_SNR_TS_S                        0
++#define PCIE_SNR_SKP                         0x00000700  /* Number of SKP Symbol */
++#define PCIE_SNR_SKP_S                       8
++#define PCIE_SNR_REPLAY_TIMER                0x0007C000  /* Timer Modifier for Replay Timer */
++#define PCIE_SNR_REPLAY_TIMER_S              14
++#define PCIE_SNR_ACKNAK_LATENCY_TIMER        0x00F80000  /* Timer Modifier for Ack/Nak Latency Timer */
++#define PCIE_SNR_ACKNAK_LATENCY_TIMER_S      19
++#define PCIE_SNR_FC_TIMER                    0x1F000000  /* Timer Modifier for Flow Control Watchdog Timer */
++#define PCIE_SNR_FC_TIMER_S                  28
++
++/* Symbol Timer Register and Filter Mask Register 1 */
++#define PCIE_STRFMR(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x71C)
++#define PCIE_STRFMR_SKP_INTERVAL            0x000007FF  /* SKP lnterval Value */
++#define PCIE_STRFMR_SKP_INTERVAL_S          0
++#define PCIE_STRFMR_FC_WDT_DISABLE          0x00008000  /* Disable of FC Watchdog Timer */
++#define PCIE_STRFMR_TLP_FUNC_MISMATCH_OK    0x00010000  /* Mask Function Mismatch Filtering for Incoming Requests */
++#define PCIE_STRFMR_POISONED_TLP_OK         0x00020000  /* Mask Poisoned TLP Filtering */
++#define PCIE_STRFMR_BAR_MATCH_OK            0x00040000  /* Mask BAR Match Filtering */
++#define PCIE_STRFMR_TYPE1_CFG_REQ_OK        0x00080000  /* Mask Type 1 Configuration Request Filtering */
++#define PCIE_STRFMR_LOCKED_REQ_OK           0x00100000  /* Mask Locked Request Filtering */
++#define PCIE_STRFMR_CPL_TAG_ERR_RULES_OK    0x00200000  /* Mask Tag Error Rules for Received Completions */
++#define PCIE_STRFMR_CPL_REQUESTOR_ID_MISMATCH_OK 0x00400000  /* Mask Requester ID Mismatch Error for Received Completions */
++#define PCIE_STRFMR_CPL_FUNC_MISMATCH_OK         0x00800000  /* Mask Function Mismatch Error for Received Completions */
++#define PCIE_STRFMR_CPL_TC_MISMATCH_OK           0x01000000  /* Mask Traffic Class Mismatch Error for Received Completions */
++#define PCIE_STRFMR_CPL_ATTR_MISMATCH_OK         0x02000000  /* Mask Attribute Mismatch Error for Received Completions */
++#define PCIE_STRFMR_CPL_LENGTH_MISMATCH_OK       0x04000000  /* Mask Length Mismatch Error for Received Completions */
++#define PCIE_STRFMR_TLP_ECRC_ERR_OK              0x08000000  /* Mask ECRC Error Filtering */
++#define PCIE_STRFMR_CPL_TLP_ECRC_OK              0x10000000  /* Mask ECRC Error Filtering for Completions */
++#define PCIE_STRFMR_RX_TLP_MSG_NO_DROP           0x20000000  /* Send Message TLPs */
++#define PCIE_STRFMR_RX_IO_TRANS_ENABLE           0x40000000  /* Mask Filtering of received I/O Requests */
++#define PCIE_STRFMR_RX_CFG_TRANS_ENABLE          0x80000000  /* Mask Filtering of Received Configuration Requests */
++
++#define PCIE_DEF_SKP_INTERVAL    700             /* 1180 ~1538 , 125MHz * 2, 250MHz * 1 */
++
++/* Filter Masker Register 2 */
++#define PCIE_FMR2(X)                             (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x720)
++#define PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1    0x00000001  /* Mask RADM Filtering and Error Handling Rules */
++#define PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1    0x00000002  /* Mask RADM Filtering and Error Handling Rules */
++
++/* Debug Register 0 */
++#define PCIE_DBR0(X)                              (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x728)
++
++/* Debug Register 1 */
++#define PCIE_DBR1(X)                              (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x72C)
++
++/* Transmit Posted FC Credit Status Register */
++#define PCIE_TPFCS(X)                             (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x730)
++#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS           0x00000FFF /* Transmit Posted Data FC Credits */
++#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS_S         0
++#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS            0x000FF000 /* Transmit Posted Header FC Credits */
++#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS_S          12
++
++/* Transmit Non-Posted FC Credit Status */
++#define PCIE_TNPFCS(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x734)
++#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS         0x00000FFF /* Transmit Non-Posted Data FC Credits */
++#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS_S       0
++#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS          0x000FF000 /* Transmit Non-Posted Header FC Credits */
++#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS_S        12
++
++/* Transmit Complete FC Credit Status Register */
++#define PCIE_TCFCS(X)                             (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x738)
++#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS         0x00000FFF /* Transmit Completion Data FC Credits */
++#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS_S       0
++#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS          0x000FF000 /* Transmit Completion Header FC Credits */
++#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS_S        12
++
++/* Queue Status Register */
++#define PCIE_QSR(X)                              (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x73C)
++#define PCIE_QSR_WAIT_UPDATE_FC_DLL               0x00000001 /* Received TLP FC Credits Not Returned */
++#define PCIE_QSR_TX_RETRY_BUF_NOT_EMPTY           0x00000002 /* Transmit Retry Buffer Not Empty */
++#define PCIE_QSR_RX_QUEUE_NOT_EMPTY               0x00000004 /* Received Queue Not Empty */
++
++/* VC Transmit Arbitration Register 1 */
++#define PCIE_VCTAR1(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x740)
++#define PCIE_VCTAR1_WRR_WEIGHT_VC0               0x000000FF /* WRR Weight for VC0 */
++#define PCIE_VCTAR1_WRR_WEIGHT_VC1               0x0000FF00 /* WRR Weight for VC1 */
++#define PCIE_VCTAR1_WRR_WEIGHT_VC2               0x00FF0000 /* WRR Weight for VC2 */
++#define PCIE_VCTAR1_WRR_WEIGHT_VC3               0xFF000000 /* WRR Weight for VC3 */
++
++/* VC Transmit Arbitration Register 2 */
++#define PCIE_VCTAR2(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x744)
++#define PCIE_VCTAR2_WRR_WEIGHT_VC4               0x000000FF /* WRR Weight for VC4 */
++#define PCIE_VCTAR2_WRR_WEIGHT_VC5               0x0000FF00 /* WRR Weight for VC5 */
++#define PCIE_VCTAR2_WRR_WEIGHT_VC6               0x00FF0000 /* WRR Weight for VC6 */
++#define PCIE_VCTAR2_WRR_WEIGHT_VC7               0xFF000000 /* WRR Weight for VC7 */
++
++/* VC0 Posted Receive Queue Control Register */
++#define PCIE_VC0_PRQCR(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x748)
++#define PCIE_VC0_PRQCR_P_DATA_CREDITS            0x00000FFF /* VC0 Posted Data Credits */
++#define PCIE_VC0_PRQCR_P_DATA_CREDITS_S          0
++#define PCIE_VC0_PRQCR_P_HDR_CREDITS             0x000FF000 /* VC0 Posted Header Credits */
++#define PCIE_VC0_PRQCR_P_HDR_CREDITS_S           12
++#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE          0x00E00000 /* VC0 Posted TLP Queue Mode */
++#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE_S        20
++#define PCIE_VC0_PRQCR_TLP_RELAX_ORDER           0x40000000 /* TLP Type Ordering for VC0 */    
++#define PCIE_VC0_PRQCR_VC_STRICT_ORDER           0x80000000 /* VC0 Ordering for Receive Queues */
++
++/* VC0 Non-Posted Receive Queue Control */
++#define PCIE_VC0_NPRQCR(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74C)
++#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS          0x00000FFF /* VC0 Non-Posted Data Credits */
++#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS_S        0
++#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS           0x000FF000 /* VC0 Non-Posted Header Credits */
++#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS_S         12
++#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE        0x00E00000 /* VC0 Non-Posted TLP Queue Mode */
++#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE_S      20
++
++/* VC0 Completion Receive Queue Control */
++#define PCIE_VC0_CRQCR(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x750)
++#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS          0x00000FFF /* VC0 Completion TLP Queue Mode */
++#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS_S        0
++#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS           0x000FF000 /* VC0 Completion Header Credits */
++#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS_S         12
++#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE        0x00E00000 /* VC0 Completion Data Credits */
++#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE_S      21
++
++/* Applicable to the above three registers */
++enum {
++    PCIE_VC0_TLP_QUEUE_MODE_STORE_FORWARD = 1,
++    PCIE_VC0_TLP_QUEUE_MODE_CUT_THROUGH   = 2,
++    PCIE_VC0_TLP_QUEUE_MODE_BYPASS        = 4,
++};
++
++/* VC0 Posted Buffer Depth Register */
++#define PCIE_VC0_PBD(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7A8)
++#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES       0x00003FFF /* VC0 Posted Data Queue Depth */
++#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES_S     0
++#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES        0x03FF0000 /* VC0 Posted Header Queue Depth */
++#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES_S      16
++
++/* VC0 Non-Posted Buffer Depth Register */
++#define PCIE_VC0_NPBD(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7AC)
++#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES     0x00003FFF /* VC0 Non-Posted Data Queue Depth */
++#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES_S   0
++#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES      0x03FF0000 /* VC0 Non-Posted Header Queue Depth */
++#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES_S    16
++
++/* VC0 Completion Buffer Depth Register */
++#define PCIE_VC0_CBD(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7B0)
++#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES     0x00003FFF /* C0 Completion Data Queue Depth */
++#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES_S   0
++#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES      0x03FF0000 /* VC0 Completion Header Queue Depth */
++#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES_S    16
++
++/* PHY Status Register, all zeros in VR9 */
++#define PCIE_PHYSR(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x810)
++
++/* PHY Control Register, all zeros in VR9 */
++#define PCIE_PHYCR(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x814)
++
++/* 
++ * PCIe PDI PHY register definition, suppose all the following 
++ * stuff is confidential. 
++ * XXX, detailed bit definition
++ */
++#define	PCIE_PHY_PLL_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x22 << 1))
++#define	PCIE_PHY_PLL_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x23 << 1))
++#define	PCIE_PHY_PLL_CTRL3(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x24 << 1))
++#define	PCIE_PHY_PLL_CTRL4(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x25 << 1))
++#define	PCIE_PHY_PLL_CTRL5(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x26 << 1))
++#define	PCIE_PHY_PLL_CTRL6(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x27 << 1))
++#define	PCIE_PHY_PLL_CTRL7(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x28 << 1))
++#define	PCIE_PHY_PLL_A_CTRL1(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x29 << 1))
++#define	PCIE_PHY_PLL_A_CTRL2(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x2A << 1))
++#define	PCIE_PHY_PLL_A_CTRL3(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x2B << 1))
++#define	PCIE_PHY_PLL_STATUS(X)      (PCIE_PHY_PORT_TO_BASE(X) + (0x2C << 1))
++ 
++#define PCIE_PHY_TX1_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x30 << 1))
++#define PCIE_PHY_TX1_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x31 << 1))
++#define PCIE_PHY_TX1_CTRL3(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x32 << 1))
++#define PCIE_PHY_TX1_A_CTRL1(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x33 << 1))
++#define PCIE_PHY_TX1_A_CTRL2(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x34 << 1))
++#define PCIE_PHY_TX1_MOD1(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x35 << 1))
++#define PCIE_PHY_TX1_MOD2(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x36 << 1))
++#define PCIE_PHY_TX1_MOD3(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x37 << 1))
++
++#define PCIE_PHY_TX2_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x38 << 1))
++#define PCIE_PHY_TX2_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x39 << 1))
++#define PCIE_PHY_TX2_A_CTRL1(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x3B << 1))
++#define PCIE_PHY_TX2_A_CTRL2(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x3C << 1))
++#define PCIE_PHY_TX2_MOD1(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x3D << 1))
++#define PCIE_PHY_TX2_MOD2(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x3E << 1))
++#define PCIE_PHY_TX2_MOD3(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x3F << 1))
++
++#define PCIE_PHY_RX1_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x50 << 1))
++#define PCIE_PHY_RX1_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x51 << 1))
++#define PCIE_PHY_RX1_CDR(X)         (PCIE_PHY_PORT_TO_BASE(X) + (0x52 << 1))
++#define PCIE_PHY_RX1_EI(X)          (PCIE_PHY_PORT_TO_BASE(X) + (0x53 << 1))
++#define PCIE_PHY_RX1_A_CTRL(X)      (PCIE_PHY_PORT_TO_BASE(X) + (0x55 << 1))
++
++/* Interrupt related stuff */
++#define PCIE_LEGACY_DISABLE 0
++#define PCIE_LEGACY_INTA  1
++#define PCIE_LEGACY_INTB  2
++#define PCIE_LEGACY_INTC  3
++#define PCIE_LEGACY_INTD  4
++#define PCIE_LEGACY_INT_MAX PCIE_LEGACY_INTD
++
++#define PCIE_IRQ_LOCK(lock) do {             \
++    unsigned long flags;                     \
++    spin_lock_irqsave(&(lock), flags);
++#define PCIE_IRQ_UNLOCK(lock)                \
++    spin_unlock_irqrestore(&(lock), flags);  \
++} while (0)
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)
++#define IRQF_SHARED SA_SHIRQ
++#endif
++
++#define PCIE_MSG_MSI        0x00000001
++#define PCIE_MSG_ISR        0x00000002
++#define PCIE_MSG_FIXUP      0x00000004
++#define PCIE_MSG_READ_CFG   0x00000008
++#define PCIE_MSG_WRITE_CFG  0x00000010
++#define PCIE_MSG_CFG        (PCIE_MSG_READ_CFG | PCIE_MSG_WRITE_CFG)
++#define PCIE_MSG_REG        0x00000020
++#define PCIE_MSG_INIT       0x00000040
++#define PCIE_MSG_ERR        0x00000080
++#define PCIE_MSG_PHY        0x00000100
++#define PCIE_MSG_ANY        0x000001ff
++
++#define IFX_PCIE_PORT0      0
++#define IFX_PCIE_PORT1      1
++
++#ifdef CONFIG_IFX_PCIE_2ND_CORE
++#define IFX_PCIE_CORE_NR    2
++#else
++#define IFX_PCIE_CORE_NR    1
++#endif
++
++//#define IFX_PCIE_ERROR_INT
++
++//#define IFX_PCIE_DBG
++
++#if defined(IFX_PCIE_DBG)
++#define IFX_PCIE_PRINT(_m, _fmt, args...) do {   \
++    if (g_pcie_debug_flag & (_m)) {              \
++        ifx_pcie_debug((_fmt), ##args);          \
++    }                                            \
++} while (0)
++
++#define INLINE 
++#else
++#define IFX_PCIE_PRINT(_m, _fmt, args...)   \
++    do {} while(0)
++#define INLINE inline
++#endif
++
++struct ifx_pci_controller {
++	struct pci_controller   pcic;
++    
++	/* RC specific, per host bus information */
++	u32   port;  /* Port index, 0 -- 1st core, 1 -- 2nd core */
++};
++
++typedef struct ifx_pcie_ir_irq {
++    const unsigned int irq;
++    const char name[16];
++}ifx_pcie_ir_irq_t;
++
++typedef struct ifx_pcie_legacy_irq{
++    const u32 irq_bit;
++    const int irq;
++}ifx_pcie_legacy_irq_t;
++
++typedef struct ifx_pcie_irq {
++    ifx_pcie_ir_irq_t ir_irq;
++    ifx_pcie_legacy_irq_t legacy_irq[PCIE_LEGACY_INT_MAX];
++}ifx_pcie_irq_t;
++
++extern u32 g_pcie_debug_flag;
++extern void ifx_pcie_debug(const char *fmt, ...);
++extern void pcie_phy_clock_mode_setup(int pcie_port);
++extern void pcie_msi_pic_init(int pcie_port);
++extern u32 ifx_pcie_bus_enum_read_hack(int where, u32 value);
++extern u32 ifx_pcie_bus_enum_write_hack(int where, u32 value);
++
++
++#include <linux/types.h>
++#include <linux/delay.h>
++#include <linux/gpio.h>
++#include <linux/clk.h>
++
++#include <lantiq_soc.h>
++
++#define IFX_PCIE_GPIO_RESET  38
++#define IFX_REG_R32	ltq_r32
++#define IFX_REG_W32	ltq_w32
++#define CONFIG_IFX_PCIE_HW_SWAP
++#define IFX_RCU_AHB_ENDIAN                      ((volatile u32*)(IFX_RCU + 0x004C))
++#define IFX_RCU_RST_REQ                         ((volatile u32*)(IFX_RCU + 0x0010))
++#define IFX_RCU_AHB_BE_PCIE_PDI                  0x00000080  /* Configure PCIE PDI module in big endian*/
++
++#define IFX_RCU                                 (KSEG1 | 0x1F203000)
++#define IFX_RCU_AHB_BE_PCIE_M                    0x00000001  /* Configure AHB master port that connects to PCIe RC in big endian */
++#define IFX_RCU_AHB_BE_PCIE_S                    0x00000010  /* Configure AHB slave port that connects to PCIe RC in little endian */
++#define IFX_RCU_AHB_BE_XBAR_M                    0x00000002  /* Configure AHB master port that connects to XBAR in big endian */
++#define CONFIG_IFX_PCIE_PHY_36MHZ_MODE
++
++#define IFX_PMU1_MODULE_PCIE_PHY   (0)
++#define IFX_PMU1_MODULE_PCIE_CTRL  (1)
++#define IFX_PMU1_MODULE_PDI        (4)
++#define IFX_PMU1_MODULE_MSI        (5)
++
++#define IFX_PMU_MODULE_PCIE_L0_CLK (31)
++
++
++static inline void pcie_ep_gpio_rst_init(int pcie_port)
++{
++}
++
++static inline void pcie_ahb_pmu_setup(void)
++{
++	struct clk *clk;
++	clk = clk_get_sys("ltq_pcie", "ahb");
++	clk_enable(clk);
++	//ltq_pmu_enable(PMU_AHBM | PMU_AHBS);
++}
++
++static inline void pcie_rcu_endian_setup(int pcie_port)
++{
++    u32 reg;
++
++    reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
++#ifdef CONFIG_IFX_PCIE_HW_SWAP
++    reg |= IFX_RCU_AHB_BE_PCIE_M;
++    reg |= IFX_RCU_AHB_BE_PCIE_S;
++    reg &= ~IFX_RCU_AHB_BE_XBAR_M;
++#else 
++    reg |= IFX_RCU_AHB_BE_PCIE_M;
++    reg &= ~IFX_RCU_AHB_BE_PCIE_S;
++    reg &= ~IFX_RCU_AHB_BE_XBAR_M;
++#endif /* CONFIG_IFX_PCIE_HW_SWAP */
++    IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
++    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN));
++}
++
++static inline void pcie_phy_pmu_enable(int pcie_port)
++{
++	struct clk *clk;
++	clk = clk_get_sys("ltq_pcie", "phy");
++	clk_enable(clk);
++	//ltq_pmu1_enable(1<<IFX_PMU1_MODULE_PCIE_PHY);
++}
++
++static inline void pcie_phy_pmu_disable(int pcie_port)
++{
++	struct clk *clk;
++	clk = clk_get_sys("ltq_pcie", "phy");
++	clk_disable(clk);
++	//ltq_pmu1_disable(1<<IFX_PMU1_MODULE_PCIE_PHY);
++}
++
++static inline void pcie_pdi_big_endian(int pcie_port)
++{
++    u32 reg;
++
++    /* SRAM2PDI endianness control. */
++    reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
++    /* Config AHB->PCIe and PDI endianness */
++    reg |= IFX_RCU_AHB_BE_PCIE_PDI;
++    IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
++}
++
++static inline void pcie_pdi_pmu_enable(int pcie_port)
++{
++	struct clk *clk;
++	clk = clk_get_sys("ltq_pcie", "pdi");
++	clk_enable(clk);
++	//ltq_pmu1_enable(1<<IFX_PMU1_MODULE_PDI);
++}
++
++static inline void pcie_core_rst_assert(int pcie_port)
++{
++    u32 reg;
++
++    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
++
++    /* Reset PCIe PHY & Core, bit 22, bit 26 may be affected if write it directly  */
++    reg |= 0x00400000;
++    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
++}
++
++static inline void pcie_core_rst_deassert(int pcie_port)
++{
++    u32 reg;
++
++    /* Make sure one micro-second delay */
++    udelay(1);
++
++    /* Reset PCIe PHY & Core, bit 22 */
++    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
++    reg &= ~0x00400000;
++    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
++}
++
++static inline void pcie_phy_rst_assert(int pcie_port)
++{
++    u32 reg;
++
++    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
++    reg |= 0x00001000; /* Bit 12 */
++    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
++}
++
++static inline void pcie_phy_rst_deassert(int pcie_port)
++{
++    u32 reg;
++
++    /* Make sure one micro-second delay */
++    udelay(1);
++
++    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
++    reg &= ~0x00001000; /* Bit 12 */
++    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
++}
++
++static inline void pcie_device_rst_assert(int pcie_port)
++{
++	gpio_set_value(IFX_PCIE_GPIO_RESET, 0);
++  //  ifx_gpio_output_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
++}
++
++static inline void pcie_device_rst_deassert(int pcie_port)
++{
++    mdelay(100);
++	gpio_set_value(IFX_PCIE_GPIO_RESET, 1);
++//    ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
++}
++
++static inline void pcie_core_pmu_setup(int pcie_port)
++{
++	struct clk *clk;
++	clk = clk_get_sys("ltq_pcie", "ctl");
++	clk_enable(clk);
++	clk = clk_get_sys("ltq_pcie", "bus");
++	clk_enable(clk);
++
++	//ltq_pmu1_enable(1 << IFX_PMU1_MODULE_PCIE_CTRL);
++	//ltq_pmu_enable(1 << IFX_PMU_MODULE_PCIE_L0_CLK);
++}
++
++static inline void pcie_msi_init(int pcie_port)
++{
++	struct clk *clk;
++    pcie_msi_pic_init(pcie_port);
++	clk = clk_get_sys("ltq_pcie", "msi");
++	clk_enable(clk);
++	//ltq_pmu1_enable(1 << IFX_PMU1_MODULE_MSI);
++}
++
++static inline u32
++ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port)
++{
++    u32 tbus_number = bus_number;
++
++#ifdef CONFIG_IFX_PCI
++    if (pcibios_host_nr() > 1) {
++        tbus_number -= pcibios_1st_host_bus_nr();
++    }
++#endif /* CONFIG_IFX_PCI */
++    return tbus_number;
++}
++
++static inline u32
++ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read)
++{
++    struct pci_dev *pdev;
++    u32 tvalue = value;
++
++    /* Sanity check */
++    pdev = pci_get_slot(bus, devfn);
++    if (pdev == NULL) {
++        return tvalue;
++    }
++
++    /* Only care about PCI bridge */
++    if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
++        return tvalue;
++    }
++
++    if (read) { /* Read hack */
++    #ifdef CONFIG_IFX_PCI
++        if (pcibios_host_nr() > 1) {
++            tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue);
++        }
++    #endif /* CONFIG_IFX_PCI */  
++    }
++    else { /* Write hack */
++    #ifdef CONFIG_IFX_PCI    
++        if (pcibios_host_nr() > 1) {
++            tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue);
++        }
++    #endif
++    }
++    return tvalue;
++}
++
++#endif /* IFXMIPS_PCIE_VR9_H */
++
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0052-MIPS-lantiq-make-GPIO3-work-on-AR9.patch b/target/linux/lantiq/patches-3.3/0052-MIPS-lantiq-make-GPIO3-work-on-AR9.patch
new file mode 100644
index 0000000000..b38cbeb727
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0052-MIPS-lantiq-make-GPIO3-work-on-AR9.patch
@@ -0,0 +1,236 @@
+From 85859883ce603bf0db782c03294873dad39176e5 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 13 Aug 2011 13:59:50 +0200
+Subject: [PATCH 52/70] MIPS: lantiq: make GPIO3 work on AR9
+
+There are 3 16bit and 1 8bit gpio ports on AR9. The gpio driver needs a hack
+at 2 places to make the different register layout of the GPIO3 work properly
+with the driver. Before only GPIO0-2 were supported. As the GPIO number scheme
+clashes with the new size, we also move the other gpio chips to new offsets.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+---
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h |    2 +
+ arch/mips/lantiq/xway/devices.c                    |    3 +
+ arch/mips/lantiq/xway/gpio.c                       |   84 ++++++++++++++++----
+ arch/mips/lantiq/xway/gpio_ebu.c                   |    3 +-
+ arch/mips/lantiq/xway/gpio_stp.c                   |    3 +-
+ 5 files changed, 75 insertions(+), 20 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index d1b8cc8..bfdeb16 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -126,7 +126,9 @@
+ #define LTQ_GPIO0_BASE_ADDR	0x1E100B10
+ #define LTQ_GPIO1_BASE_ADDR	0x1E100B40
+ #define LTQ_GPIO2_BASE_ADDR	0x1E100B70
++#define LTQ_GPIO3_BASE_ADDR	0x1E100BA0
+ #define LTQ_GPIO_SIZE		0x30
++#define LTQ_GPIO3_SIZE		0x10
+ 
+ /* SSC */
+ #define LTQ_SSC_BASE_ADDR	0x1e100800
+diff --git a/arch/mips/lantiq/xway/devices.c b/arch/mips/lantiq/xway/devices.c
+index 5efa4f3..e6d45bc 100644
+--- a/arch/mips/lantiq/xway/devices.c
++++ b/arch/mips/lantiq/xway/devices.c
+@@ -34,6 +34,7 @@ static struct resource ltq_gpio_resource[] = {
+ 	MEM_RES("gpio0", LTQ_GPIO0_BASE_ADDR, LTQ_GPIO_SIZE),
+ 	MEM_RES("gpio1", LTQ_GPIO1_BASE_ADDR, LTQ_GPIO_SIZE),
+ 	MEM_RES("gpio2", LTQ_GPIO2_BASE_ADDR, LTQ_GPIO_SIZE),
++	MEM_RES("gpio3", LTQ_GPIO3_BASE_ADDR, LTQ_GPIO3_SIZE),
+ };
+ 
+ void __init ltq_register_gpio(void)
+@@ -47,6 +48,8 @@ void __init ltq_register_gpio(void)
+ 	if (ltq_is_ar9() || ltq_is_vr9()) {
+ 		platform_device_register_simple("ltq_gpio", 2,
+ 			&ltq_gpio_resource[2], 1);
++		platform_device_register_simple("ltq_gpio", 3,
++			&ltq_gpio_resource[3], 1);
+ 	}
+ }
+ 
+diff --git a/arch/mips/lantiq/xway/gpio.c b/arch/mips/lantiq/xway/gpio.c
+index 54ec6c9..375329b 100644
+--- a/arch/mips/lantiq/xway/gpio.c
++++ b/arch/mips/lantiq/xway/gpio.c
+@@ -23,9 +23,17 @@
+ #define LTQ_GPIO_OD		0x14
+ #define LTQ_GPIO_PUDSEL		0x1C
+ #define LTQ_GPIO_PUDEN		0x20
++#define LTQ_GPIO3_OD		0x24
++#define LTQ_GPIO3_ALTSEL1	0x24
++#define LTQ_GPIO3_PUDSEL	0x28
++#define LTQ_GPIO3_PUDEN		0x2C
+ 
++/* PORT3 only has 8 pins and its register layout
++   is slightly different */
+ #define PINS_PER_PORT		16
+-#define MAX_PORTS		3
++#define PINS_PORT3		8
++#define MAX_PORTS		4
++#define MAX_PIN			56
+ 
+ #define ltq_gpio_getbit(m, r, p)	(!!(ltq_r32(m + r) & (1 << p)))
+ #define ltq_gpio_setbit(m, r, p)	ltq_w32_mask(0, (1 << p), m + r)
+@@ -55,7 +63,7 @@ int ltq_gpio_request(struct device *dev, unsigned int pin, unsigned int mux,
+ {
+ 	int id = 0;
+ 
+-	if (pin >= (MAX_PORTS * PINS_PER_PORT))
++	if (pin >= MAX_PIN)
+ 		return -EINVAL;
+ 	if (devm_gpio_request(dev, pin, name)) {
+ 		pr_err("failed to setup lantiq gpio: %s\n", name);
+@@ -75,12 +83,21 @@ int ltq_gpio_request(struct device *dev, unsigned int pin, unsigned int mux,
+ 	else
+ 		ltq_gpio_clearbit(ltq_gpio_port[id].membase,
+ 			LTQ_GPIO_ALTSEL0, pin);
+-	if (mux & 0x1)
+-		ltq_gpio_setbit(ltq_gpio_port[id].membase,
+-			LTQ_GPIO_ALTSEL1, pin);
+-	else
+-		ltq_gpio_clearbit(ltq_gpio_port[id].membase,
+-			LTQ_GPIO_ALTSEL1, pin);
++	if (id == 3) {
++		if (mux & 0x1)
++			ltq_gpio_setbit(ltq_gpio_port[1].membase,
++				LTQ_GPIO3_ALTSEL1, pin);
++		else
++			ltq_gpio_clearbit(ltq_gpio_port[1].membase,
++				LTQ_GPIO3_ALTSEL1, pin);
++	} else {
++		if (mux & 0x1)
++			ltq_gpio_setbit(ltq_gpio_port[id].membase,
++				LTQ_GPIO_ALTSEL1, pin);
++		else
++			ltq_gpio_clearbit(ltq_gpio_port[id].membase,
++				LTQ_GPIO_ALTSEL1, pin);
++	}
+ 	return 0;
+ }
+ EXPORT_SYMBOL(ltq_gpio_request);
+@@ -106,10 +123,19 @@ static int ltq_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
+ {
+ 	struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+ 
+-	ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
++	if (chip->ngpio == PINS_PORT3) {
++		ltq_gpio_clearbit(ltq_gpio_port[0].membase,
++				LTQ_GPIO3_OD, offset);
++		ltq_gpio_setbit(ltq_gpio_port[0].membase,
++				LTQ_GPIO3_PUDSEL, offset);
++		ltq_gpio_setbit(ltq_gpio_port[0].membase,
++				LTQ_GPIO3_PUDEN, offset);
++	} else {
++		ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
++		ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_PUDSEL, offset);
++		ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_PUDEN, offset);
++	}
+ 	ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset);
+-	ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_PUDSEL, offset);
+-	ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_PUDEN, offset);
+ 
+ 	return 0;
+ }
+@@ -119,10 +145,19 @@ static int ltq_gpio_direction_output(struct gpio_chip *chip,
+ {
+ 	struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+ 
+-	ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
++	if (chip->ngpio == PINS_PORT3) {
++		ltq_gpio_setbit(ltq_gpio_port[0].membase,
++				LTQ_GPIO3_OD, offset);
++		ltq_gpio_clearbit(ltq_gpio_port[0].membase,
++				LTQ_GPIO3_PUDSEL, offset);
++		ltq_gpio_clearbit(ltq_gpio_port[0].membase,
++				LTQ_GPIO3_PUDEN, offset);
++	} else {
++		ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
++		ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_PUDSEL, offset);
++		ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_PUDEN, offset);
++	}
+ 	ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset);
+-	ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_PUDSEL, offset);
+-	ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_PUDEN, offset);
+ 	ltq_gpio_set(chip, offset, value);
+ 
+ 	return 0;
+@@ -133,7 +168,11 @@ static int ltq_gpio_req(struct gpio_chip *chip, unsigned offset)
+ 	struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+ 
+ 	ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL0, offset);
+-	ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL1, offset);
++	if (chip->ngpio == PINS_PORT3)
++		ltq_gpio_clearbit(ltq_gpio_port[1].membase,
++				LTQ_GPIO3_ALTSEL1, offset);
++	else
++		ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL1, offset);
+ 	return 0;
+ }
+ 
+@@ -146,6 +185,16 @@ static int ltq_gpio_probe(struct platform_device *pdev)
+ 			pdev->id);
+ 		return -EINVAL;
+ 	}
++
++	/* dirty hack - The registers of port3 are not mapped linearly.
++	   Port 3 may only load if Port 1/2 are mapped */
++	if ((pdev->id == 3) && (!ltq_gpio_port[1].membase
++					|| !ltq_gpio_port[2].membase)) {
++		dev_err(&pdev->dev,
++			"ports 1/2 need to be loaded before port 3 works\n");
++		return -ENOMEM;
++	}
++
+ 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ 	if (!res) {
+ 		dev_err(&pdev->dev, "failed to get memory for gpio port %d\n",
+@@ -175,7 +224,10 @@ static int ltq_gpio_probe(struct platform_device *pdev)
+ 	ltq_gpio_port[pdev->id].chip.set = ltq_gpio_set;
+ 	ltq_gpio_port[pdev->id].chip.request = ltq_gpio_req;
+ 	ltq_gpio_port[pdev->id].chip.base = PINS_PER_PORT * pdev->id;
+-	ltq_gpio_port[pdev->id].chip.ngpio = PINS_PER_PORT;
++	if (pdev->id == 3)
++		ltq_gpio_port[pdev->id].chip.ngpio = PINS_PORT3;
++	else
++		ltq_gpio_port[pdev->id].chip.ngpio = PINS_PER_PORT;
+ 	platform_set_drvdata(pdev, &ltq_gpio_port[pdev->id]);
+ 	return gpiochip_add(&ltq_gpio_port[pdev->id].chip);
+ }
+diff --git a/arch/mips/lantiq/xway/gpio_ebu.c b/arch/mips/lantiq/xway/gpio_ebu.c
+index b91c7f1..bc5696b 100644
+--- a/arch/mips/lantiq/xway/gpio_ebu.c
++++ b/arch/mips/lantiq/xway/gpio_ebu.c
+@@ -61,9 +61,8 @@ static struct gpio_chip ltq_ebu_chip = {
+ 	.label = "ltq_ebu",
+ 	.direction_output = ltq_ebu_direction_output,
+ 	.set = ltq_ebu_set,
+-	.base = 72,
++	.base = 100,
+ 	.ngpio = 16,
+-	.can_sleep = 1,
+ 	.owner = THIS_MODULE,
+ };
+ 
+diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c
+index da91c5e..9610c10 100644
+--- a/arch/mips/lantiq/xway/gpio_stp.c
++++ b/arch/mips/lantiq/xway/gpio_stp.c
+@@ -74,9 +74,8 @@ static struct gpio_chip ltq_stp_chip = {
+ 	.label = "ltq_stp",
+ 	.direction_output = ltq_stp_direction_output,
+ 	.set = ltq_stp_set,
+-	.base = 48,
++	.base = 200,
+ 	.ngpio = 24,
+-	.can_sleep = 1,
+ 	.owner = THIS_MODULE,
+ };
+ 
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0053-MIPS-lantiq-VPE-extensions.patch b/target/linux/lantiq/patches-3.3/0053-MIPS-lantiq-VPE-extensions.patch
new file mode 100644
index 0000000000..34e3ac9483
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0053-MIPS-lantiq-VPE-extensions.patch
@@ -0,0 +1,1221 @@
+From 948bb4dd94209332253d2b69c28f44e2bb11f518 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 29 Sep 2011 20:30:40 +0200
+Subject: [PATCH 53/70] MIPS: lantiq: VPE extensions
+
+---
+ arch/mips/Kconfig                  |   22 +++
+ arch/mips/include/asm/mipsmtregs.h |   54 +++++++
+ arch/mips/kernel/Makefile          |    3 +-
+ arch/mips/kernel/mips-mt.c         |   97 +++++++++++--
+ arch/mips/kernel/mtsched_proc.c    |  279 ++++++++++++++++++++++++++++++++++++
+ arch/mips/kernel/perf_proc.c       |  191 ++++++++++++++++++++++++
+ arch/mips/kernel/proc.c            |   17 +++
+ arch/mips/kernel/smtc.c            |    7 +
+ arch/mips/kernel/vpe.c             |  250 ++++++++++++++++++++++++++++++++-
+ 9 files changed, 905 insertions(+), 15 deletions(-)
+ create mode 100644 arch/mips/kernel/mtsched_proc.c
+ create mode 100644 arch/mips/kernel/perf_proc.c
+
+diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
+index 0dd8ae3..4a36923 100644
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -1935,6 +1935,28 @@ config MIPS_VPE_LOADER
+ 	  Includes a loader for loading an elf relocatable object
+ 	  onto another VPE and running it.
+ 
++config IFX_VPE_EXT
++	bool "IFX APRP Extensions"
++	depends on MIPS_VPE_LOADER
++	default y
++	help
++	  IFX included extensions in APRP
++
++config PERFCTRS
++	bool "34K Performance counters"
++	depends on MIPS_MT && PROC_FS
++	default n
++	help
++	  34K Performance counter through /proc
++
++config MTSCHED
++	bool "Support mtsched priority configuration for TCs"
++	depends on MIPS_MT && PROC_FS
++	default y
++	help
++	  Support for mtsched priority configuration for TCs through
++	  /proc/mips/mtsched
++
+ config MIPS_MT_SMTC_IM_BACKSTOP
+ 	bool "Use per-TC register bits as backstop for inhibited IM bits"
+ 	depends on MIPS_MT_SMTC
+diff --git a/arch/mips/include/asm/mipsmtregs.h b/arch/mips/include/asm/mipsmtregs.h
+index c9420aa..04bfb4b 100644
+--- a/arch/mips/include/asm/mipsmtregs.h
++++ b/arch/mips/include/asm/mipsmtregs.h
+@@ -28,14 +28,34 @@
+ #define read_c0_vpeconf0()		__read_32bit_c0_register($1, 2)
+ #define write_c0_vpeconf0(val)		__write_32bit_c0_register($1, 2, val)
+ 
++#define read_c0_vpeconf1()              __read_32bit_c0_register($1, 3)
++#define write_c0_vpeconf1(val)          __write_32bit_c0_register($1, 3, val)
++
++#define read_c0_vpeschedule()           __read_32bit_c0_register($1, 5)
++#define write_c0_vpeschedule(val)       __write_32bit_c0_register($1, 5, val)
++
++#define read_c0_vpeschefback()      	__read_32bit_c0_register($1, 6)
++#define write_c0_vpeschefback(val)  	__write_32bit_c0_register($1, 6, val)
++
++#define read_c0_vpeopt()              __read_32bit_c0_register($1, 7)
++#define write_c0_vpeopt(val)          __write_32bit_c0_register($1, 7, val)
++
+ #define read_c0_tcstatus()		__read_32bit_c0_register($2, 1)
+ #define write_c0_tcstatus(val)		__write_32bit_c0_register($2, 1, val)
+ 
+ #define read_c0_tcbind()		__read_32bit_c0_register($2, 2)
++#define write_c0_tcbind(val)		__write_32bit_c0_register($2, 2, val)
+ 
+ #define read_c0_tccontext()		__read_32bit_c0_register($2, 5)
+ #define write_c0_tccontext(val)		__write_32bit_c0_register($2, 5, val)
+ 
++#define read_c0_tcschedule()		__read_32bit_c0_register($2, 6)
++#define write_c0_tcschedule(val)	__write_32bit_c0_register($2, 6, val)
++
++#define read_c0_tcschefback()		__read_32bit_c0_register($2, 7)
++#define write_c0_tcschefback(val)	__write_32bit_c0_register($2, 7, val)
++
++
+ #else /* Assembly */
+ /*
+  * Macros for use in assembly language code
+@@ -74,6 +94,8 @@
+ #define MVPCONTROL_STLB_SHIFT	2
+ #define MVPCONTROL_STLB		(_ULCAST_(1) << MVPCONTROL_STLB_SHIFT)
+ 
++#define MVPCONTROL_CPA_SHIFT	3
++#define MVPCONTROL_CPA		(_ULCAST_(1) << MVPCONTROL_CPA_SHIFT)
+ 
+ /* MVPConf0 fields */
+ #define MVPCONF0_PTC_SHIFT	0
+@@ -84,6 +106,8 @@
+ #define MVPCONF0_TCA		( _ULCAST_(1) << MVPCONF0_TCA_SHIFT)
+ #define MVPCONF0_PTLBE_SHIFT	16
+ #define MVPCONF0_PTLBE		(_ULCAST_(0x3ff) << MVPCONF0_PTLBE_SHIFT)
++#define MVPCONF0_PCP_SHIFT	27
++#define MVPCONF0_PCP		(_ULCAST_(1) << MVPCONF0_PCP_SHIFT)
+ #define MVPCONF0_TLBS_SHIFT	29
+ #define MVPCONF0_TLBS		(_ULCAST_(1) << MVPCONF0_TLBS_SHIFT)
+ #define MVPCONF0_M_SHIFT	31
+@@ -121,9 +145,25 @@
+ #define VPECONF0_VPA		(_ULCAST_(1) << VPECONF0_VPA_SHIFT)
+ #define VPECONF0_MVP_SHIFT	1
+ #define VPECONF0_MVP		(_ULCAST_(1) << VPECONF0_MVP_SHIFT)
++#define VPECONF0_ICS_SHIFT      16
++#define VPECONF0_ICS		(_ULCAST_(1) << VPECONF0_ICS_SHIFT)
++#define VPECONF0_DCS_SHIFT      17
++#define VPECONF0_DCS            (_ULCAST_(1) << VPECONF0_DCS_SHIFT)
+ #define VPECONF0_XTC_SHIFT	21
+ #define VPECONF0_XTC		(_ULCAST_(0xff) << VPECONF0_XTC_SHIFT)
+ 
++/* VPEOpt fields */
++#define VPEOPT_DWX_SHIFT	0
++#define VPEOPT_IWX_SHIFT	8
++#define VPEOPT_IWX0		( _ULCAST_(0x1) << VPEOPT_IWX_SHIFT)
++#define VPEOPT_IWX1		( _ULCAST_(0x2) << VPEOPT_IWX_SHIFT)
++#define VPEOPT_IWX2		( _ULCAST_(0x4) << VPEOPT_IWX_SHIFT)
++#define VPEOPT_IWX3		( _ULCAST_(0x8) << VPEOPT_IWX_SHIFT)
++#define VPEOPT_DWX0		( _ULCAST_(0x1) << VPEOPT_DWX_SHIFT)
++#define VPEOPT_DWX1		( _ULCAST_(0x2) << VPEOPT_DWX_SHIFT)
++#define VPEOPT_DWX2		( _ULCAST_(0x4) << VPEOPT_DWX_SHIFT)
++#define VPEOPT_DWX3		( _ULCAST_(0x8) << VPEOPT_DWX_SHIFT)
++
+ /* TCStatus fields (per TC) */
+ #define TCSTATUS_TASID		(_ULCAST_(0xff))
+ #define TCSTATUS_IXMT_SHIFT	10
+@@ -350,6 +390,14 @@ do {									\
+ #define write_vpe_c0_vpecontrol(val)	mttc0(1, 1, val)
+ #define read_vpe_c0_vpeconf0()		mftc0(1, 2)
+ #define write_vpe_c0_vpeconf0(val)	mttc0(1, 2, val)
++#define read_vpe_c0_vpeschedule()	mftc0(1, 5)
++#define write_vpe_c0_vpeschedule(val)	mttc0(1, 5, val)
++#define read_vpe_c0_vpeschefback()	mftc0(1, 6)
++#define write_vpe_c0_vpeschefback(val)	mttc0(1, 6, val)
++#define read_vpe_c0_vpeopt()            mftc0(1, 7)
++#define write_vpe_c0_vpeopt(val)        mttc0(1, 7, val)
++#define read_vpe_c0_wired()		mftc0(6, 0)
++#define write_vpe_c0_wired(val)		mttc0(6, 0, val)
+ #define read_vpe_c0_count()		mftc0(9, 0)
+ #define write_vpe_c0_count(val)		mttc0(9, 0, val)
+ #define read_vpe_c0_status()		mftc0(12, 0)
+@@ -381,6 +429,12 @@ do {									\
+ #define write_tc_c0_tchalt(val)		mttc0(2, 4, val)
+ #define read_tc_c0_tccontext()		mftc0(2, 5)
+ #define write_tc_c0_tccontext(val)	mttc0(2, 5, val)
++#define read_tc_c0_tcschedule()		mftc0(2, 6)
++#define write_tc_c0_tcschedule(val)	mttc0(2, 6, val)
++#define read_tc_c0_tcschefback()	mftc0(2, 7)
++#define write_tc_c0_tcschefback(val)	mttc0(2, 7, val)
++#define read_tc_c0_entryhi()            mftc0(10, 0)
++#define write_tc_c0_entryhi(val)        mttc0(10, 0, val)
+ 
+ /* GPR */
+ #define read_tc_gpr_sp()		mftgpr(29)
+diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
+index 0c6877e..4d75dd7 100644
+--- a/arch/mips/kernel/Makefile
++++ b/arch/mips/kernel/Makefile
+@@ -90,7 +90,8 @@ obj-$(CONFIG_MIPS32_O32)	+= binfmt_elfo32.o scall64-o32.o
+ 
+ obj-$(CONFIG_KGDB)		+= kgdb.o
+ obj-$(CONFIG_PROC_FS)		+= proc.o
+-
++obj-$(CONFIG_MTSCHED)		+= mtsched_proc.o
++obj-$(CONFIG_PERFCTRS)		+= perf_proc.o
+ obj-$(CONFIG_64BIT)		+= cpu-bugs64.o
+ 
+ obj-$(CONFIG_I8253)		+= i8253.o
+diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c
+index c23d11f..11d6489 100644
+--- a/arch/mips/kernel/mips-mt.c
++++ b/arch/mips/kernel/mips-mt.c
+@@ -21,26 +21,96 @@
+ #include <asm/cacheflush.h>
+ 
+ int vpelimit;
+-
+ static int __init maxvpes(char *str)
+ {
+ 	get_option(&str, &vpelimit);
+-
+ 	return 1;
+ }
+-
+ __setup("maxvpes=", maxvpes);
+ 
+ int tclimit;
+-
+ static int __init maxtcs(char *str)
+ {
+ 	get_option(&str, &tclimit);
++	return 1;
++}
++__setup("maxtcs=", maxtcs);
+ 
++#ifdef CONFIG_IFX_VPE_EXT
++int stlb;
++static int __init istlbshared(char *str)
++{
++	get_option(&str, &stlb);
+ 	return 1;
+ }
++__setup("vpe_tlb_shared=", istlbshared);
+ 
+-__setup("maxtcs=", maxtcs);
++int vpe0_wired;
++static int __init vpe0wired(char *str)
++{
++	get_option(&str, &vpe0_wired);
++	return 1;
++}
++__setup("vpe0_wired_tlb_entries=", vpe0wired);
++
++int vpe1_wired;
++static int __init vpe1wired(char *str)
++{
++	get_option(&str, &vpe1_wired);
++	return 1;
++}
++__setup("vpe1_wired_tlb_entries=", vpe1wired);
++
++#ifdef CONFIG_MIPS_MT_SMTC
++extern int nostlb;
++#endif
++void configure_tlb(void)
++{
++	int vpeflags, tcflags, tlbsiz;
++	unsigned int config1val;
++	vpeflags = dvpe();
++	tcflags = dmt();
++	write_c0_vpeconf0((read_c0_vpeconf0() | VPECONF0_MVP));
++	write_c0_mvpcontrol((read_c0_mvpcontrol() | MVPCONTROL_VPC));
++	mips_ihb();
++	//printk("stlb = %d, vpe0_wired = %d vpe1_wired=%d\n", stlb,vpe0_wired, vpe1_wired);
++	if (stlb) {
++		if (!(read_c0_mvpconf0() & MVPCONF0_TLBS)) {
++			emt(tcflags);
++			evpe(vpeflags);
++			return;
++		}
++
++		write_c0_mvpcontrol(read_c0_mvpcontrol() | MVPCONTROL_STLB);
++		write_c0_wired(vpe0_wired + vpe1_wired);
++		if (((read_vpe_c0_config() & MIPS_CONF_MT) >> 7) == 1) {
++			config1val = read_vpe_c0_config1();
++			tlbsiz = (((config1val >> 25) & 0x3f) + 1);
++			if (tlbsiz > 64)
++				tlbsiz = 64;
++			cpu_data[0].tlbsize = tlbsiz;
++			current_cpu_data.tlbsize = tlbsiz;
++		}
++
++	}
++	else {
++		write_c0_mvpcontrol(read_c0_mvpcontrol() & ~MVPCONTROL_STLB);
++		write_c0_wired(vpe0_wired);
++	}
++
++	ehb();
++	write_c0_mvpcontrol((read_c0_mvpcontrol() & ~MVPCONTROL_VPC));
++	ehb();
++	local_flush_tlb_all();
++
++	printk("Wired TLB entries for Linux read_c0_wired() = %d\n", read_c0_wired());
++#ifdef CONFIG_MIPS_MT_SMTC
++	nostlb = !stlb;
++#endif
++	emt(tcflags);
++	evpe(vpeflags);
++}
++#endif
+ 
+ /*
+  * Dump new MIPS MT state for the core. Does not leave TCs halted.
+@@ -78,18 +148,18 @@ void mips_mt_regdump(unsigned long mvpctl)
+ 			if ((read_tc_c0_tcbind() & TCBIND_CURVPE) == i) {
+ 				printk("  VPE %d\n", i);
+ 				printk("   VPEControl : %08lx\n",
+-				       read_vpe_c0_vpecontrol());
++					read_vpe_c0_vpecontrol());
+ 				printk("   VPEConf0 : %08lx\n",
+-				       read_vpe_c0_vpeconf0());
++					read_vpe_c0_vpeconf0());
+ 				printk("   VPE%d.Status : %08lx\n",
+-				       i, read_vpe_c0_status());
++					i, read_vpe_c0_status());
+ 				printk("   VPE%d.EPC : %08lx %pS\n",
+-				       i, read_vpe_c0_epc(),
+-				       (void *) read_vpe_c0_epc());
++					i, read_vpe_c0_epc(),
++					(void *) read_vpe_c0_epc());
+ 				printk("   VPE%d.Cause : %08lx\n",
+-				       i, read_vpe_c0_cause());
++					i, read_vpe_c0_cause());
+ 				printk("   VPE%d.Config7 : %08lx\n",
+-				       i, read_vpe_c0_config7());
++					i, read_vpe_c0_config7());
+ 				break; /* Next VPE */
+ 			}
+ 		}
+@@ -287,6 +357,9 @@ void mips_mt_set_cpuoptions(void)
+ 		printk("Mapped %ld ITC cells starting at 0x%08x\n",
+ 			((itcblkgrn & 0x7fe00000) >> 20), itc_base);
+ 	}
++#ifdef CONFIG_IFX_VPE_EXT
++	configure_tlb();
++#endif
+ }
+ 
+ /*
+diff --git a/arch/mips/kernel/mtsched_proc.c b/arch/mips/kernel/mtsched_proc.c
+new file mode 100644
+index 0000000..4dafded
+--- /dev/null
++++ b/arch/mips/kernel/mtsched_proc.c
+@@ -0,0 +1,279 @@
++/*
++ * /proc hooks for MIPS MT scheduling policy management for 34K cores
++ *
++ *  This program is free software; you can distribute it and/or modify it
++ *  under the terms of the GNU General Public License (Version 2) as
++ *  published by the Free Software Foundation.
++ *
++ *  This program is distributed in the hope it will be useful, but WITHOUT
++ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++ *  for more details.
++ *
++ *  You should have received a copy of the GNU General Public License along
++ *  with this program; if not, write to the Free Software Foundation, Inc.,
++ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * Copyright (C) 2006 Mips Technologies, Inc
++ */
++
++#include <linux/kernel.h>
++
++#include <asm/cpu.h>
++#include <asm/processor.h>
++#include <asm/system.h>
++#include <asm/mipsregs.h>
++#include <asm/mipsmtregs.h>
++#include <asm/uaccess.h>
++#include <linux/proc_fs.h>
++
++static struct proc_dir_entry *mtsched_proc;
++
++#ifndef CONFIG_MIPS_MT_SMTC
++#define NTCS 2
++#else
++#define NTCS NR_CPUS
++#endif
++#define NVPES 2
++
++int lastvpe = 1;
++int lasttc = 8;
++
++static int proc_read_mtsched(char *page, char **start, off_t off,
++			int count, int *eof, void *data)
++{
++	int totalen = 0;
++	int len;
++
++	int i;
++	int vpe;
++	int mytc;
++	unsigned long flags;
++	unsigned int mtflags;
++	unsigned int haltstate;
++	unsigned int vpes_checked[NVPES];
++	unsigned int vpeschedule[NVPES];
++	unsigned int vpeschefback[NVPES];
++	unsigned int tcschedule[NTCS];
++	unsigned int tcschefback[NTCS];
++
++	/* Dump the state of the MIPS MT scheduling policy manager */
++	/* Inititalize control state */
++	for(i = 0; i < NVPES; i++) {
++		vpes_checked[i] = 0;
++		vpeschedule[i] = 0;
++		vpeschefback[i] = 0;
++	}
++	for(i = 0; i < NTCS; i++) {
++		tcschedule[i] = 0;
++		tcschefback[i] = 0;
++	}
++
++	/* Disable interrupts and multithreaded issue */
++	local_irq_save(flags);
++	mtflags = dvpe();
++
++	/* Then go through the TCs, halt 'em, and extract the values */
++	mytc = (read_c0_tcbind() & TCBIND_CURTC) >> TCBIND_CURTC_SHIFT;
++	for(i = 0; i < NTCS; i++) {
++		if(i == mytc) {
++			/* No need to halt ourselves! */
++			tcschedule[i] = read_c0_tcschedule();
++			tcschefback[i] = read_c0_tcschefback();
++			/* If VPE bound to TC hasn't been checked, do it */
++			vpe = read_c0_tcbind() & TCBIND_CURVPE;
++			if(!vpes_checked[vpe]) {
++				vpeschedule[vpe] = read_c0_vpeschedule();
++				vpeschefback[vpe] = read_c0_vpeschefback();
++				vpes_checked[vpe] = 1;
++			}
++		} else {
++			settc(i);
++			haltstate = read_tc_c0_tchalt();
++			write_tc_c0_tchalt(TCHALT_H);
++			mips_ihb();
++			tcschedule[i] = read_tc_c0_tcschedule();
++			tcschefback[i] = read_tc_c0_tcschefback();
++			/* If VPE bound to TC hasn't been checked, do it */
++			vpe = read_tc_c0_tcbind() & TCBIND_CURVPE;
++			if(!vpes_checked[vpe]) {
++			    vpeschedule[vpe] = read_vpe_c0_vpeschedule();
++			    vpeschefback[vpe] = read_vpe_c0_vpeschefback();
++			    vpes_checked[vpe] = 1;
++			}
++			if(!haltstate) write_tc_c0_tchalt(0);
++		}
++	}
++	/* Re-enable MT and interrupts */
++	evpe(mtflags);
++	local_irq_restore(flags);
++
++	for(vpe=0; vpe < NVPES; vpe++) {
++		len = sprintf(page, "VPE[%d].VPEschedule  = 0x%08x\n",
++			vpe, vpeschedule[vpe]);
++		totalen += len;
++		page += len;
++		len = sprintf(page, "VPE[%d].VPEschefback = 0x%08x\n",
++			vpe, vpeschefback[vpe]);
++		totalen += len;
++		page += len;
++	}
++	for(i=0; i < NTCS; i++) {
++		len = sprintf(page, "TC[%d].TCschedule    = 0x%08x\n",
++			i, tcschedule[i]);
++		totalen += len;
++		page += len;
++		len = sprintf(page, "TC[%d].TCschefback   = 0x%08x\n",
++			i, tcschefback[i]);
++		totalen += len;
++		page += len;
++	}
++	return totalen;
++}
++
++/*
++ * Write to perf counter registers based on text input
++ */
++
++#define TXTBUFSZ 100
++
++static int proc_write_mtsched(struct file *file, const char *buffer,
++				unsigned long count, void *data)
++{
++	int len = 0;
++	char mybuf[TXTBUFSZ];
++	/* At most, we will set up 9 TCs and 2 VPEs, 11 entries in all */
++	char entity[1];   //, entity1[1];
++	int number[1];
++	unsigned long value[1];
++	int nparsed = 0 , index = 0;
++	unsigned long flags;
++	unsigned int mtflags;
++	unsigned int haltstate;
++	unsigned int tcbindval;
++
++	if(count >= TXTBUFSZ) len = TXTBUFSZ-1;
++	else len = count;
++	memset(mybuf,0,TXTBUFSZ);
++	if(copy_from_user(mybuf, buffer, len)) return -EFAULT;
++
++	nparsed = sscanf(mybuf, "%c%d %lx",
++		 &entity[0] ,&number[0], &value[0]);
++
++	/*
++	 * Having acquired the inputs, which might have
++	 * generated exceptions and preemptions,
++	 * program the registers.
++	 */
++	/* Disable interrupts and multithreaded issue */
++	local_irq_save(flags);
++	mtflags = dvpe();
++
++	if(entity[index] == 't' ) {
++		/* Set TCSchedule or TCScheFBack of specified TC */
++		if(number[index] > NTCS) goto skip;
++		/* If it's our own TC, do it direct */
++		if(number[index] ==
++				((read_c0_tcbind() & TCBIND_CURTC)
++				>> TCBIND_CURTC_SHIFT)) {
++			if(entity[index] == 't')
++				 write_c0_tcschedule(value[index]);
++			else
++				write_c0_tcschefback(value[index]);
++		} else {
++		/* Otherwise, we do it via MTTR */
++			settc(number[index]);
++			haltstate = read_tc_c0_tchalt();
++			write_tc_c0_tchalt(TCHALT_H);
++			mips_ihb();
++			if(entity[index] == 't')
++				 write_tc_c0_tcschedule(value[index]);
++			else
++				write_tc_c0_tcschefback(value[index]);
++			mips_ihb();
++			if(!haltstate) write_tc_c0_tchalt(0);
++		}
++	} else if(entity[index] == 'v') {
++		/* Set VPESchedule of specified VPE */
++		if(number[index] > NVPES) goto skip;
++		tcbindval = read_c0_tcbind();
++		/* Are we doing this to our current VPE? */
++		if((tcbindval & TCBIND_CURVPE) == number[index]) {
++			/* Then life is simple */
++			write_c0_vpeschedule(value[index]);
++		} else {
++			/*
++			 * Bind ourselves to the other VPE long enough
++			 * to program the bind value.
++			 */
++			write_c0_tcbind((tcbindval & ~TCBIND_CURVPE)
++					   | number[index]);
++			mips_ihb();
++			write_c0_vpeschedule(value[index]);
++			mips_ihb();
++			/* Restore previous binding */
++			write_c0_tcbind(tcbindval);
++			mips_ihb();
++		}
++	}
++
++	else if(entity[index] == 'r') {
++		unsigned int vpes_checked[2], vpe ,i , mytc;
++		vpes_checked[0] = vpes_checked[1] = 0;
++
++		/* Then go through the TCs, halt 'em, and extract the values */
++		mytc = (read_c0_tcbind() & TCBIND_CURTC) >> TCBIND_CURTC_SHIFT;
++
++		for(i = 0; i < NTCS; i++) {
++			if(i == mytc) {
++				/* No need to halt ourselves! */
++				write_c0_vpeschefback(0);
++				write_c0_tcschefback(0);
++			} else {
++				settc(i);
++				haltstate = read_tc_c0_tchalt();
++				write_tc_c0_tchalt(TCHALT_H);
++				mips_ihb();
++				write_tc_c0_tcschefback(0);
++				/* If VPE bound to TC hasn't been checked, do it */
++				vpe = read_tc_c0_tcbind() & TCBIND_CURVPE;
++				if(!vpes_checked[vpe]) {
++				    write_vpe_c0_vpeschefback(0);
++				    vpes_checked[vpe] = 1;
++				}
++				if(!haltstate) write_tc_c0_tchalt(0);
++			}
++		}
++	}
++	else {
++		printk ("\n Usage : <t/v><0/1> <Hex Value>\n Example : t0 0x01\n");
++	}
++
++skip:
++	/* Re-enable MT and interrupts */
++	evpe(mtflags);
++	local_irq_restore(flags);
++	return (len);
++}
++
++static int __init init_mtsched_proc(void)
++{
++	extern struct proc_dir_entry *get_mips_proc_dir(void);
++	struct proc_dir_entry *mips_proc_dir;
++
++	if (!cpu_has_mipsmt) {
++		printk("mtsched: not a MIPS MT capable processor\n");
++		return -ENODEV;
++	}
++
++	mips_proc_dir = get_mips_proc_dir();
++
++	mtsched_proc = create_proc_entry("mtsched", 0644, mips_proc_dir);
++	mtsched_proc->read_proc = proc_read_mtsched;
++	mtsched_proc->write_proc = proc_write_mtsched;
++
++	return 0;
++}
++
++/* Automagically create the entry */
++module_init(init_mtsched_proc);
+diff --git a/arch/mips/kernel/perf_proc.c b/arch/mips/kernel/perf_proc.c
+new file mode 100644
+index 0000000..7eec015
+--- /dev/null
++++ b/arch/mips/kernel/perf_proc.c
+@@ -0,0 +1,191 @@
++/*
++ * /proc hooks for CPU performance counter support for SMTC kernel
++ * (and ultimately others)
++ * Copyright (C) 2006 Mips Technologies, Inc
++ */
++
++#include <linux/kernel.h>
++
++#include <asm/cpu.h>
++#include <asm/processor.h>
++#include <asm/system.h>
++#include <asm/mipsregs.h>
++#include <asm/uaccess.h>
++#include <linux/proc_fs.h>
++
++/*
++ * /proc diagnostic and statistics hooks
++ */
++
++
++/* Internal software-extended event counters */
++
++static unsigned long long extencount[4] = {0,0,0,0};
++
++static struct proc_dir_entry *perf_proc;
++
++static int proc_read_perf(char *page, char **start, off_t off,
++				int count, int *eof, void *data)
++{
++	int totalen = 0;
++	int len;
++
++	len = sprintf(page, "PerfCnt[0].Ctl : 0x%08x\n", read_c0_perfctrl0());
++	totalen += len;
++	page += len;
++	len = sprintf(page, "PerfCnt[0].Cnt : %Lu\n",
++		extencount[0] + (unsigned long long)((unsigned)read_c0_perfcntr0()));
++	totalen += len;
++	page += len;
++	len = sprintf(page, "PerfCnt[1].Ctl : 0x%08x\n", read_c0_perfctrl1());
++	totalen += len;
++	page += len;
++	len = sprintf(page, "PerfCnt[1].Cnt : %Lu\n",
++		extencount[1] + (unsigned long long)((unsigned)read_c0_perfcntr1()));
++	totalen += len;
++	page += len;
++	len = sprintf(page, "PerfCnt[2].Ctl : 0x%08x\n", read_c0_perfctrl2());
++	totalen += len;
++	page += len;
++	len = sprintf(page, "PerfCnt[2].Cnt : %Lu\n",
++		extencount[2] + (unsigned long long)((unsigned)read_c0_perfcntr2()));
++	totalen += len;
++	page += len;
++	len = sprintf(page, "PerfCnt[3].Ctl : 0x%08x\n", read_c0_perfctrl3());
++	totalen += len;
++	page += len;
++	len = sprintf(page, "PerfCnt[3].Cnt : %Lu\n",
++		extencount[3] + (unsigned long long)((unsigned)read_c0_perfcntr3()));
++	totalen += len;
++	page += len;
++
++	return totalen;
++}
++
++/*
++ * Write to perf counter registers based on text input
++ */
++
++#define TXTBUFSZ 100
++
++static int proc_write_perf(struct file *file, const char *buffer,
++				unsigned long count, void *data)
++{
++	int len;
++	int nparsed;
++	int index;
++	char mybuf[TXTBUFSZ];
++
++	int which[4];
++	unsigned long control[4];
++	long long ctrdata[4];
++
++	if(count >= TXTBUFSZ) len = TXTBUFSZ-1;
++	else len = count;
++	memset(mybuf,0,TXTBUFSZ);
++	if(copy_from_user(mybuf, buffer, len)) return -EFAULT;
++
++	nparsed = sscanf(mybuf,
++			"%d %lx %Ld %d %lx %Ld %d %lx %Ld %d %lx %Ld",
++				&which[0], &control[0], &ctrdata[0],
++				&which[1], &control[1], &ctrdata[1],
++				&which[2], &control[2], &ctrdata[2],
++				&which[3], &control[3], &ctrdata[3]);
++
++	for(index = 0; nparsed >= 3; index++) {
++		switch (which[index]) {
++		case 0:
++			write_c0_perfctrl0(control[index]);
++			if(ctrdata[index] != -1) {
++			    extencount[0] = (unsigned long long)ctrdata[index];
++			    write_c0_perfcntr0((unsigned long)0);
++			}
++			break;
++		case 1:
++			write_c0_perfctrl1(control[index]);
++			if(ctrdata[index] != -1) {
++			    extencount[1] = (unsigned long long)ctrdata[index];
++			    write_c0_perfcntr1((unsigned long)0);
++			}
++			break;
++		case 2:
++			write_c0_perfctrl2(control[index]);
++			if(ctrdata[index] != -1) {
++			    extencount[2] = (unsigned long long)ctrdata[index];
++			    write_c0_perfcntr2((unsigned long)0);
++			}
++			break;
++		case 3:
++			write_c0_perfctrl3(control[index]);
++			if(ctrdata[index] != -1) {
++			    extencount[3] = (unsigned long long)ctrdata[index];
++			    write_c0_perfcntr3((unsigned long)0);
++			}
++			break;
++		}
++		nparsed -= 3;
++	}
++	return (len);
++}
++
++extern int (*perf_irq)(void);
++
++/*
++ * Invoked when timer interrupt vector picks up a perf counter overflow
++ */
++
++static int perf_proc_irq(void)
++{
++	unsigned long snapshot;
++
++	/*
++	 * It would be nice to do this as a loop, but we don't have
++	 * indirect access to CP0 registers.
++	 */
++	snapshot = read_c0_perfcntr0();
++	if ((long)snapshot < 0) {
++		extencount[0] +=
++			(unsigned long long)((unsigned)read_c0_perfcntr0());
++		write_c0_perfcntr0(0);
++	}
++	snapshot = read_c0_perfcntr1();
++	if ((long)snapshot < 0) {
++		extencount[1] +=
++			(unsigned long long)((unsigned)read_c0_perfcntr1());
++		write_c0_perfcntr1(0);
++	}
++	snapshot = read_c0_perfcntr2();
++	if ((long)snapshot < 0) {
++		extencount[2] +=
++			(unsigned long long)((unsigned)read_c0_perfcntr2());
++		write_c0_perfcntr2(0);
++	}
++	snapshot = read_c0_perfcntr3();
++	if ((long)snapshot < 0) {
++		extencount[3] +=
++			(unsigned long long)((unsigned)read_c0_perfcntr3());
++		write_c0_perfcntr3(0);
++	}
++	return 0;
++}
++
++static int __init init_perf_proc(void)
++{
++	extern struct proc_dir_entry *get_mips_proc_dir(void);
++
++	struct proc_dir_entry *mips_proc_dir = get_mips_proc_dir();
++
++	write_c0_perfcntr0(0);
++	write_c0_perfcntr1(0);
++	write_c0_perfcntr2(0);
++	write_c0_perfcntr3(0);
++	perf_proc = create_proc_entry("perf", 0644, mips_proc_dir);
++	perf_proc->read_proc = proc_read_perf;
++	perf_proc->write_proc = proc_write_perf;
++	perf_irq = perf_proc_irq;
++
++	return 0;
++}
++
++/* Automagically create the entry */
++module_init(init_perf_proc);
+diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
+index e309665..2de204f 100644
+--- a/arch/mips/kernel/proc.c
++++ b/arch/mips/kernel/proc.c
+@@ -7,6 +7,7 @@
+ #include <linux/kernel.h>
+ #include <linux/sched.h>
+ #include <linux/seq_file.h>
++#include <linux/proc_fs.h>
+ #include <asm/bootinfo.h>
+ #include <asm/cpu.h>
+ #include <asm/cpu-features.h>
+@@ -110,3 +111,19 @@ const struct seq_operations cpuinfo_op = {
+ 	.stop	= c_stop,
+ 	.show	= show_cpuinfo,
+ };
++
++/*
++ * Support for MIPS/local /proc hooks in /proc/mips/
++ */
++
++static struct proc_dir_entry *mips_proc = NULL;
++
++struct proc_dir_entry *get_mips_proc_dir(void)
++{
++       /*
++        * This ought not to be preemptable.
++        */
++       if(mips_proc == NULL)
++               mips_proc = proc_mkdir("mips", NULL);
++       return(mips_proc);
++}
+diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
+index 0a42ff3..41f5258 100644
+--- a/arch/mips/kernel/smtc.c
++++ b/arch/mips/kernel/smtc.c
+@@ -1334,6 +1334,13 @@ void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu)
+ 	asid = asid_cache(cpu);
+ 
+ 	do {
++#ifdef CONFIG_IFX_VPE_EXT
++		/* If TLB is shared between AP and RP (AP is running SMTC),
++		   leave out max ASID i.e., ASID_MASK for RP
++		 */
++		if (!nostlb && ((asid & ASID_MASK) == (ASID_MASK - 1)))
++			asid++;
++#endif
+ 		if (!((asid += ASID_INC) & ASID_MASK) ) {
+ 			if (cpu_has_vtag_icache)
+ 				flush_icache_all();
+diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
+index bfa12a4..e338ba5 100644
+--- a/arch/mips/kernel/vpe.c
++++ b/arch/mips/kernel/vpe.c
+@@ -75,6 +75,58 @@ static struct kspd_notifications kspd_events;
+ static int kspd_events_reqd;
+ #endif
+ 
++#ifdef CONFIG_IFX_VPE_EXT
++static int is_sdepgm;
++extern int stlb;
++extern int vpe0_wired;
++extern int vpe1_wired;
++unsigned int vpe1_load_addr;
++
++static int __init load_address(char *str)
++{
++	get_option(&str, &vpe1_load_addr);
++	return 1;
++}
++__setup("vpe1_load_addr=", load_address);
++
++#include <asm/mipsmtregs.h>
++#define write_vpe_c0_wired(val)		mttc0(6, 0, val)
++
++#ifndef COMMAND_LINE_SIZE
++#	define COMMAND_LINE_SIZE	512
++#endif
++
++char command_line[COMMAND_LINE_SIZE * 2];
++
++static unsigned int vpe1_mem;
++static int __init vpe1mem(char *str)
++{
++	vpe1_mem = memparse(str, &str);
++	return 1;
++}
++__setup("vpe1_mem=", vpe1mem);
++
++uint32_t vpe1_wdog_ctr;
++static int __init wdog_ctr(char *str)
++{
++	get_option(&str, &vpe1_wdog_ctr);
++	return 1;
++}
++
++__setup("vpe1_wdog_ctr_addr=", wdog_ctr);
++EXPORT_SYMBOL(vpe1_wdog_ctr);
++
++uint32_t vpe1_wdog_timeout;
++static int __init wdog_timeout(char *str)
++{
++        get_option(&str, &vpe1_wdog_timeout);
++        return 1;
++}
++
++__setup("vpe1_wdog_timeout=", wdog_timeout);
++EXPORT_SYMBOL(vpe1_wdog_timeout);
++
++#endif
+ /* grab the likely amount of memory we will need. */
+ #ifdef CONFIG_MIPS_VPE_LOADER_TOM
+ #define P_SIZE (2 * 1024 * 1024)
+@@ -267,6 +319,13 @@ static void *alloc_progmem(unsigned long len)
+ 	void *addr;
+ 
+ #ifdef CONFIG_MIPS_VPE_LOADER_TOM
++#ifdef CONFIG_IFX_VPE_EXT
++	if (vpe1_load_addr) {
++		memset((void *)vpe1_load_addr, 0, len);
++		return (void *)vpe1_load_addr;
++	}
++#endif
++
+ 	/*
+ 	 * This means you must tell Linux to use less memory than you
+ 	 * physically have, for example by passing a mem= boot argument.
+@@ -745,6 +804,12 @@ static int vpe_run(struct vpe * v)
+ 	}
+ 
+ 	/* Write the address we want it to start running from in the TCPC register. */
++#if defined(CONFIG_IFX_VPE_EXT) && 0
++	if (stlb)
++		write_vpe_c0_wired(vpe0_wired + vpe1_wired);
++	else
++		write_vpe_c0_wired(vpe1_wired);
++#endif
+ 	write_tc_c0_tcrestart((unsigned long)v->__start);
+ 	write_tc_c0_tccontext((unsigned long)0);
+ 
+@@ -758,6 +823,20 @@ static int vpe_run(struct vpe * v)
+ 
+ 	write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H);
+ 
++#if defined(CONFIG_IFX_VPE_EXT) && 0
++	/*
++	 * $a2 & $a3 are used to pass command line parameters to VPE1. $a2
++	 * points to the start of the command line string and $a3 points to
++	 * the end of the string. This convention is identical to the Linux
++	 * kernel boot parameter passing mechanism. Please note that $a3 is
++	 * used to pass physical memory size or 0 in SDE tool kit. So, if you
++	 * are passing comand line parameters through $a2 & $a3 SDE programs
++	 * don't work as desired.
++	 */
++	mttgpr(6, command_line);
++	mttgpr(7, (command_line + strlen(command_line)));
++	if (is_sdepgm)
++#endif
+ 	/*
+ 	 * The sde-kit passes 'memsize' to __start in $a3, so set something
+ 	 * here...  Or set $a3 to zero and define DFLT_STACK_SIZE and
+@@ -832,6 +911,9 @@ static int find_vpe_symbols(struct vpe * v, Elf_Shdr * sechdrs,
+ 	if ( (v->__start == 0) || (v->shared_ptr == NULL))
+ 		return -1;
+ 
++#ifdef CONFIG_IFX_VPE_EXT
++	is_sdepgm = 1;
++#endif
+ 	return 0;
+ }
+ 
+@@ -993,6 +1075,15 @@ static int vpe_elfload(struct vpe * v)
+ 			   (unsigned long)v->load_addr + v->len);
+ 
+ 	if ((find_vpe_symbols(v, sechdrs, symindex, strtab, &mod)) < 0) {
++#ifdef CONFIG_IFX_VPE_EXT
++		if (vpe1_load_addr) {
++			/* Conversion to KSEG1 is required ??? */
++			v->__start = KSEG1ADDR(vpe1_load_addr);
++			is_sdepgm = 0;
++			return 0;
++		}
++#endif
++
+ 		if (v->__start == 0) {
+ 			printk(KERN_WARNING "VPE loader: program does not contain "
+ 			       "a __start symbol\n");
+@@ -1063,6 +1154,9 @@ static int vpe_open(struct inode *inode, struct file *filp)
+ 	struct vpe_notifications *not;
+ 	struct vpe *v;
+ 	int ret;
++#ifdef CONFIG_IFX_VPE_EXT
++   int progsize;
++#endif
+ 
+ 	if (minor != iminor(inode)) {
+ 		/* assume only 1 device at the moment. */
+@@ -1088,7 +1182,12 @@ static int vpe_open(struct inode *inode, struct file *filp)
+ 		release_progmem(v->load_addr);
+ 		cleanup_tc(get_tc(tclimit));
+ 	}
+-
++#ifdef CONFIG_IFX_VPE_EXT
++	progsize = (vpe1_mem  != 0) ? vpe1_mem : P_SIZE;
++	//printk("progsize = %x\n", progsize);
++	v->pbuffer = vmalloc(progsize);
++	v->plen = progsize;
++#else
+ 	/* this of-course trashes what was there before... */
+ 	v->pbuffer = vmalloc(P_SIZE);
+ 	if (!v->pbuffer) {
+@@ -1096,11 +1195,14 @@ static int vpe_open(struct inode *inode, struct file *filp)
+ 		return -ENOMEM;
+ 	}
+ 	v->plen = P_SIZE;
++#endif
+ 	v->load_addr = NULL;
+ 	v->len = 0;
+ 
++#if 0
+ 	v->uid = filp->f_cred->fsuid;
+ 	v->gid = filp->f_cred->fsgid;
++#endif
+ 
+ #ifdef CONFIG_MIPS_APSP_KSPD
+ 	/* get kspd to tell us when a syscall_exit happens */
+@@ -1348,6 +1450,133 @@ static void kspd_sp_exit( int sp_id)
+ 	cleanup_tc(get_tc(sp_id));
+ }
+ #endif
++#ifdef CONFIG_IFX_VPE_EXT
++int32_t vpe1_sw_start(void* sw_start_addr, uint32_t tcmask, uint32_t flags)
++{
++	enum vpe_state state;
++	struct vpe *v = get_vpe(tclimit);
++	struct vpe_notifications *not;
++
++	if (tcmask || flags) {
++		printk(KERN_WARNING "Currently tcmask and flags should be 0.\
++				other values not supported\n");
++		return -1;
++	}
++
++	state = xchg(&v->state, VPE_STATE_INUSE);
++	if (state != VPE_STATE_UNUSED) {
++		vpe_stop(v);
++
++		list_for_each_entry(not, &v->notify, list) {
++			not->stop(tclimit);
++		}
++	}
++
++	v->__start = (unsigned long)sw_start_addr;
++	is_sdepgm = 0;
++
++	if (!vpe_run(v)) {
++		printk(KERN_DEBUG "VPE loader: VPE1 running successfully\n");
++		return 0;
++	}
++	return -1;
++}
++
++EXPORT_SYMBOL(vpe1_sw_start);
++
++int32_t vpe1_sw_stop(uint32_t flags)
++{
++	struct vpe *v = get_vpe(tclimit);
++
++	if (!vpe_free(v)) {
++		printk(KERN_DEBUG "RP Stopped\n");
++		return 0;
++	}
++	else
++		return -1;
++}
++
++EXPORT_SYMBOL(vpe1_sw_stop);
++
++uint32_t vpe1_get_load_addr (uint32_t flags)
++{
++	return vpe1_load_addr;
++}
++
++EXPORT_SYMBOL(vpe1_get_load_addr);
++
++uint32_t vpe1_get_max_mem (uint32_t flags)
++{
++	if (!vpe1_mem)
++		return P_SIZE;
++	else
++		return vpe1_mem;
++}
++
++EXPORT_SYMBOL(vpe1_get_max_mem);
++
++void* vpe1_get_cmdline_argument(void)
++{
++	return saved_command_line;
++}
++
++EXPORT_SYMBOL(vpe1_get_cmdline_argument);
++
++int32_t vpe1_set_boot_param(char *field, char *value, char flags)
++{
++	char *ptr, string[64];
++	int start_off, end_off;
++	if (!field)
++		return -1;
++	strcpy(string, field);
++	if (value) {
++		strcat(string, "=");
++		strcat(string, value);
++		strcat(command_line, " ");
++		strcat(command_line, string);
++	}
++	else {
++		ptr = strstr(command_line, string);
++		if (ptr) {
++			start_off = ptr - command_line;
++			ptr += strlen(string);
++			while ((*ptr != ' ') && (*ptr != '\0'))
++				ptr++;
++			end_off = ptr - command_line;
++			command_line[start_off] = '\0';
++			strcat (command_line, command_line+end_off);
++		}
++	}
++	return 0;
++}
++
++EXPORT_SYMBOL(vpe1_set_boot_param);
++
++int32_t vpe1_get_boot_param(char *field, char **value, char flags)
++{
++	char *ptr, string[64];
++	int i = 0;
++	if (!field)
++		return -1;
++	if ((ptr = strstr(command_line, field))) {
++		ptr += strlen(field) + 1; /* including = */
++		while ((*ptr != ' ') && (*ptr != '\0'))
++			string[i++] = *ptr++;
++		string[i] = '\0';
++		*value = kmalloc((strlen(string) + 1), GFP_KERNEL);
++		if (*value != NULL)
++			strcpy(*value, string);
++	}
++	else
++		*value = NULL;
++
++	return 0;
++}
++
++EXPORT_SYMBOL(vpe1_get_boot_param);
++
++extern void configure_tlb(void);
++#endif
+ 
+ static ssize_t store_kill(struct device *dev, struct device_attribute *attr,
+ 			  const char *buf, size_t len)
+@@ -1429,6 +1658,18 @@ static int __init vpe_module_init(void)
+ 		printk("VPE loader: not a MIPS MT capable processor\n");
+ 		return -ENODEV;
+ 	}
++#ifdef CONFIG_IFX_VPE_EXT
++#ifndef CONFIG_MIPS_MT_SMTC
++	configure_tlb();
++#endif
++#endif
++
++#ifndef CONFIG_MIPS_MT_SMTC
++	if (!vpelimit)
++		vpelimit = 1;
++	if (!tclimit)
++		tclimit = 1;
++#endif
+ 
+ 	if (vpelimit == 0) {
+ 		printk(KERN_WARNING "No VPEs reserved for AP/SP, not "
+@@ -1473,10 +1714,12 @@ static int __init vpe_module_init(void)
+ 	mtflags = dmt();
+ 	vpflags = dvpe();
+ 
++	back_to_back_c0_hazard();
++
+ 	/* Put MVPE's into 'configuration state' */
+ 	set_c0_mvpcontrol(MVPCONTROL_VPC);
+ 
+-	/* dump_mtregs(); */
++	dump_mtregs();
+ 
+ 	val = read_c0_mvpconf0();
+ 	hw_tcs = (val & MVPCONF0_PTC) + 1;
+@@ -1488,6 +1731,7 @@ static int __init vpe_module_init(void)
+ 		 * reschedule send IPIs or similar we might hang.
+ 		 */
+ 		clear_c0_mvpcontrol(MVPCONTROL_VPC);
++		back_to_back_c0_hazard();
+ 		evpe(vpflags);
+ 		emt(mtflags);
+ 		local_irq_restore(flags);
+@@ -1513,6 +1757,7 @@ static int __init vpe_module_init(void)
+ 			}
+ 
+ 			v->ntcs = hw_tcs - tclimit;
++                        write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE) | 1);
+ 
+ 			/* add the tc to the list of this vpe's tc's. */
+ 			list_add(&t->tc, &v->tc);
+@@ -1581,6 +1826,7 @@ static int __init vpe_module_init(void)
+ out_reenable:
+ 	/* release config state */
+ 	clear_c0_mvpcontrol(MVPCONTROL_VPC);
++	back_to_back_c0_hazard();
+ 
+ 	evpe(vpflags);
+ 	emt(mtflags);
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0054-MIPS-lantiq-falcon-VPE-softdog.patch b/target/linux/lantiq/patches-3.3/0054-MIPS-lantiq-falcon-VPE-softdog.patch
new file mode 100644
index 0000000000..18dced7da4
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0054-MIPS-lantiq-falcon-VPE-softdog.patch
@@ -0,0 +1,180 @@
+From b7a07d349a9a05ac39f5d359a86519d93395b729 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 29 Sep 2011 21:29:14 +0200
+Subject: [PATCH 54/70] MIPS: lantiq: falcon VPE softdog
+
+---
+ arch/mips/include/asm/mach-lantiq/falcon/vpe.h |   44 ++++++++++
+ arch/mips/lantiq/falcon/softdog_vpe.c          |  109 ++++++++++++++++++++++++
+ 2 files changed, 153 insertions(+), 0 deletions(-)
+ create mode 100644 arch/mips/include/asm/mach-lantiq/falcon/vpe.h
+ create mode 100644 arch/mips/lantiq/falcon/softdog_vpe.c
+
+diff --git a/arch/mips/include/asm/mach-lantiq/falcon/vpe.h b/arch/mips/include/asm/mach-lantiq/falcon/vpe.h
+new file mode 100644
+index 0000000..22a701b
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/falcon/vpe.h
+@@ -0,0 +1,44 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; either version 2 of the License, or
++ *   (at your option) any later version.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2005 infineon
++ *   Copyright (C) 2007 John Crispin <blogic@openwrt.org>
++ *
++ */
++#ifndef _IFXMIPS_VPE_H__
++#define _IFXMIPS_VPE_H__
++
++/* For the explanation of the APIs please refer the section "MT APRP Kernel
++ * Programming" in AR9 SW Architecture Specification
++ */
++int32_t vpe1_sw_start(void* sw_start_addr, uint32_t tcmask, uint32_t flags);
++int32_t vpe1_sw_stop(uint32_t flags);
++uint32_t vpe1_get_load_addr (uint32_t flags);
++uint32_t vpe1_get_max_mem (uint32_t flags);
++
++int32_t vpe1_set_boot_param(char *field, char *value, char flags);
++int32_t vpe1_get_boot_param(char *field, char **value, char flags);
++
++/* Watchdog APIs */
++extern unsigned long vpe1_wdog_ctr;
++extern unsigned long vpe1_wdog_timeout;
++
++unsigned long vpe1_sw_wdog_start(unsigned long);
++unsigned long vpe1_sw_wdog_stop(unsigned long);
++
++typedef int (*VPE_SW_WDOG_RESET)(unsigned long wdog_cleared_ok_count);
++int32_t vpe1_sw_wdog_register_reset_handler(VPE_SW_WDOG_RESET reset_fn);
++
++#endif
+diff --git a/arch/mips/lantiq/falcon/softdog_vpe.c b/arch/mips/lantiq/falcon/softdog_vpe.c
+new file mode 100644
+index 0000000..85d22a2
+--- /dev/null
++++ b/arch/mips/lantiq/falcon/softdog_vpe.c
+@@ -0,0 +1,109 @@
++/*
++** =============================================================================
++** FILE NAME     : softdog_vpe.c
++** MODULES       : LXDB
++** DATE          : 24-03-2008
++** AUTHOR        : LXDB Team
++** DESCRIPTION   : This header file contains the code for the watchdog
++**                 implentation on vpe1 side.
++** REFERENCES    :
++** COPYRIGHT     : Copyright (c) 2008
++**                 Am Campeon 1-12, 85579 Neubiberg, Germany
++** Any use of this software is subject to the conclusion of a respective
++** License agreement. Without such a License agreement no rights to the
++** software are granted
++**
++** HISTORY       :
++** $Date   $Author    $Comment
++** 24-03-2008   LXDB    Initial version
++** ============================================================================
++*/
++
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/types.h>
++#include <linux/timer.h>
++#include <linux/reboot.h>
++#include <linux/init.h>
++#include <linux/jiffies.h>
++
++#include <falcon/vpe.h>
++
++static unsigned long last_wdog_value;
++static unsigned long vpe1_wdog_cleared;
++
++static unsigned long vpe1_wdog_dead;
++static void watchdog_vpe0_fire(unsigned long); /* Called when vpe0 timer expires */
++static void keep_alive_vpe0(unsigned long);
++VPE_SW_WDOG_RESET reset_local_fn;
++
++
++static struct timer_list watchdog_vpe0_ticktock =
++                TIMER_INITIALIZER(watchdog_vpe0_fire, 0, 0);
++
++static void watchdog_vpe0_fire (unsigned long flags)
++{
++	volatile unsigned long *wdog_ctr_value;
++	wdog_ctr_value = (void*)vpe1_wdog_ctr;
++	if (*wdog_ctr_value == last_wdog_value) { /* VPE1 watchdog expiry handling */
++		vpe1_sw_wdog_stop(flags);
++		vpe1_wdog_dead++;
++		printk(KERN_DEBUG "VPE1 watchdog reset handler called\n");
++	/* Call the reset handler function */
++		reset_local_fn(flags);
++	} else { /* Everything is OK on vpe1 side. Continue. */
++		last_wdog_value = *wdog_ctr_value;
++		vpe1_wdog_cleared++;
++		keep_alive_vpe0(flags);
++	}
++}
++
++int32_t vpe1_sw_wdog_register_reset_handler (VPE_SW_WDOG_RESET reset_fn)
++{
++	reset_local_fn = (VPE_SW_WDOG_RESET)reset_fn;
++	return 0;
++}
++
++static void keep_alive_vpe0(unsigned long flags)
++{
++	mod_timer(&watchdog_vpe0_ticktock, jiffies+ vpe1_wdog_timeout );
++}
++
++unsigned long vpe1_sw_wdog_start(unsigned long flags)
++{
++	volatile unsigned long *wdog_ctr_value;
++	wdog_ctr_value = (void*)vpe1_wdog_ctr;
++	*wdog_ctr_value = 0;
++	last_wdog_value = 0;
++	keep_alive_vpe0(flags);
++	return 0;
++}
++
++unsigned long vpe1_sw_wdog_stop(unsigned long flags)
++{
++	del_timer(&watchdog_vpe0_ticktock);
++	return 0;
++}
++
++static int __init watchdog_vpe1_init(void)
++{
++	/* Nothing to be done here */
++	return 0;
++}
++
++static void __exit watchdog_vpe1_exit(void)
++{
++	unsigned long flags=0;
++	vpe1_sw_wdog_stop(flags);
++}
++
++module_init(watchdog_vpe1_init);
++module_exit(watchdog_vpe1_exit);
++
++EXPORT_SYMBOL(vpe1_sw_wdog_register_reset_handler);
++EXPORT_SYMBOL(vpe1_sw_wdog_start);
++EXPORT_SYMBOL(vpe1_sw_wdog_stop);
++
++MODULE_AUTHOR("LXDB");
++MODULE_DESCRIPTION("Software Watchdog For VPE1");
++MODULE_LICENSE("GPL");
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0055-MIPS-lantiq-udp-in-kernel-redirect.patch b/target/linux/lantiq/patches-3.3/0055-MIPS-lantiq-udp-in-kernel-redirect.patch
new file mode 100644
index 0000000000..8b69bbd3e2
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0055-MIPS-lantiq-udp-in-kernel-redirect.patch
@@ -0,0 +1,378 @@
+From 186a2683b8fc1730dff28b2201d7508501a1dee4 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 29 Sep 2011 20:29:54 +0200
+Subject: [PATCH 55/70] MIPS: lantiq: udp in-kernel redirect
+
+---
+ include/linux/udp_redirect.h |   57 +++++++++++++
+ net/Kconfig                  |    6 ++
+ net/ipv4/Makefile            |    3 +
+ net/ipv4/udp.c               |   28 ++++++-
+ net/ipv4/udp_redirect_symb.c |  186 ++++++++++++++++++++++++++++++++++++++++++
+ 5 files changed, 276 insertions(+), 4 deletions(-)
+ create mode 100644 include/linux/udp_redirect.h
+ create mode 100644 net/ipv4/udp_redirect_symb.c
+
+diff --git a/include/linux/udp_redirect.h b/include/linux/udp_redirect.h
+new file mode 100644
+index 0000000..de1e64f
+--- /dev/null
++++ b/include/linux/udp_redirect.h
+@@ -0,0 +1,57 @@
++#ifndef _UDP_REDIRECT_H
++#define _UDP_REDIRECT_H
++
++/******************************************************************************
++
++                               Copyright (c) 2006
++                            Infineon Technologies AG
++                     Am Campeon 1-12; 81726 Munich, Germany
++
++  THE DELIVERY OF THIS SOFTWARE AS WELL AS THE HEREBY GRANTED NON-EXCLUSIVE,
++  WORLDWIDE LICENSE TO USE, COPY, MODIFY, DISTRIBUTE AND SUBLICENSE THIS
++  SOFTWARE IS FREE OF CHARGE.
++
++  THE LICENSED SOFTWARE IS PROVIDED "AS IS" AND INFINEON EXPRESSLY DISCLAIMS
++  ALL REPRESENTATIONS AND WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING
++  WITHOUT LIMITATION, WARRANTIES OR REPRESENTATIONS OF WORKMANSHIP,
++  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, DURABILITY, THAT THE
++  OPERATING OF THE LICENSED SOFTWARE WILL BE ERROR FREE OR FREE OF ANY THIRD
++  PARTY CLAIMS, INCLUDING WITHOUT LIMITATION CLAIMS OF THIRD PARTY INTELLECTUAL
++  PROPERTY INFRINGEMENT.
++
++  EXCEPT FOR ANY LIABILITY DUE TO WILFUL ACTS OR GROSS NEGLIGENCE AND EXCEPT
++  FOR ANY PERSONAL INJURY INFINEON SHALL IN NO EVENT BE LIABLE FOR ANY CLAIM
++  OR DAMAGES OF ANY KIND, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
++  ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
++  DEALINGS IN THE SOFTWARE.
++
++******************************************************************************/
++
++/* ============================= */
++/* Includes                      */
++/* ============================= */
++#ifndef _LINUX_TYPES_H
++#include <linux/types.h>
++#endif
++
++
++/* ============================= */
++/* Definitions                   */
++/* ============================= */
++#define UDP_REDIRECT_MAGIC (void*)0x55445052L
++
++
++/* ============================= */
++/* Global variable declaration   */
++/* ============================= */
++extern int (*udp_do_redirect_fn)(struct sock *sk, struct sk_buff *skb);
++extern int (*udpredirect_getfrag_fn)(void *p, char * to,
++                                     int offset, int fraglen, int odd,
++                                     struct sk_buff *skb);
++/* ============================= */
++/* Global function declaration   */
++/* ============================= */
++
++extern int udpredirect_getfrag(void *p, char * to, int offset,
++                               int fraglen, int odd, struct sk_buff *skb);
++#endif
+diff --git a/net/Kconfig b/net/Kconfig
+index e07272d..2118693 100644
+--- a/net/Kconfig
++++ b/net/Kconfig
+@@ -72,6 +72,12 @@ config INET
+ 
+ 	  Short answer: say Y.
+ 
++config IFX_UDP_REDIRECT
++	bool "IFX Kernel Packet Interface for UDP redirection"
++	help
++	  You can say Y here if you want to use hooks from kernel for
++	  UDP redirection.
++
+ if INET
+ source "net/ipv4/Kconfig"
+ source "net/ipv6/Kconfig"
+diff --git a/net/ipv4/Makefile b/net/ipv4/Makefile
+index ff75d3b..127edb9 100644
+--- a/net/ipv4/Makefile
++++ b/net/ipv4/Makefile
+@@ -14,6 +14,9 @@ obj-y     := route.o inetpeer.o protocol.o \
+ 	     inet_fragment.o ping.o
+ 
+ obj-$(CONFIG_SYSCTL) += sysctl_net_ipv4.o
++ifneq ($(CONFIG_IFX_UDP_REDIRECT),)
++obj-$(CONFIG_IFX_UDP_REDIRECT) += udp_redirect_symb.o
++endif
+ obj-$(CONFIG_PROC_FS) += proc.o
+ obj-$(CONFIG_IP_MULTIPLE_TABLES) += fib_rules.o
+ obj-$(CONFIG_IP_MROUTE) += ipmr.o
+diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
+index 5d075b5..a2ee1bf 100644
+--- a/net/ipv4/udp.c
++++ b/net/ipv4/udp.c
+@@ -108,6 +108,10 @@
+ #include <trace/events/udp.h>
+ #include "udp_impl.h"
+ 
++#if defined(CONFIG_IFX_UDP_REDIRECT) || defined(CONFIG_IFX_UDP_REDIRECT_MODULE)
++#include <linux/udp_redirect.h>
++#endif
++
+ struct udp_table udp_table __read_mostly;
+ EXPORT_SYMBOL(udp_table);
+ 
+@@ -804,7 +808,7 @@ int udp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
+ 	u8  tos;
+ 	int err, is_udplite = IS_UDPLITE(sk);
+ 	int corkreq = up->corkflag || msg->msg_flags&MSG_MORE;
+-	int (*getfrag)(void *, char *, int, int, int, struct sk_buff *);
++	int (*getfrag)(void *, char *, int, int, int, struct sk_buff *) = NULL;
+ 	struct sk_buff *skb;
+ 	struct ip_options_data opt_copy;
+ 
+@@ -821,7 +825,13 @@ int udp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
+ 	ipc.opt = NULL;
+ 	ipc.tx_flags = 0;
+ 
+-	getfrag = is_udplite ? udplite_getfrag : ip_generic_getfrag;
++/* UDPREDIRECT */
++#if defined(CONFIG_IFX_UDP_REDIRECT) || defined(CONFIG_IFX_UDP_REDIRECT_MODULE)
++	if(udpredirect_getfrag_fn && sk->sk_user_data == UDP_REDIRECT_MAGIC)
++		getfrag = udpredirect_getfrag_fn;
++	else
++#endif /* IFX_UDP_REDIRECT */
++		getfrag = is_udplite ? udplite_getfrag : ip_generic_getfrag;
+ 
+ 	fl4 = &inet->cork.fl.u.ip4;
+ 	if (up->pending) {
+@@ -1625,6 +1635,7 @@ int __udp4_lib_rcv(struct sk_buff *skb, struct udp_table *udptable,
+ 	struct rtable *rt = skb_rtable(skb);
+ 	__be32 saddr, daddr;
+ 	struct net *net = dev_net(skb->dev);
++	int ret = 0;
+ 
+ 	/*
+ 	 *  Validate the packet.
+@@ -1657,7 +1668,16 @@ int __udp4_lib_rcv(struct sk_buff *skb, struct udp_table *udptable,
+ 	sk = __udp4_lib_lookup_skb(skb, uh->source, uh->dest, udptable);
+ 
+ 	if (sk != NULL) {
+-		int ret = udp_queue_rcv_skb(sk, skb);
++	/* UDPREDIRECT */
++#if defined(CONFIG_IFX_UDP_REDIRECT) || defined(CONFIG_IFX_UDP_REDIRECT_MODULE)
++      if(udp_do_redirect_fn && sk->sk_user_data == UDP_REDIRECT_MAGIC)
++      {
++         udp_do_redirect_fn(sk,skb);
++         kfree_skb(skb);
++         return(0);
++      }
++#endif
++		ret = udp_queue_rcv_skb(sk, skb);
+ 		sock_put(sk);
+ 
+ 		/* a return value > 0 means to resubmit the input, but
+@@ -1954,7 +1974,7 @@ struct proto udp_prot = {
+ 	.clear_sk	   = sk_prot_clear_portaddr_nulls,
+ };
+ EXPORT_SYMBOL(udp_prot);
+-
++EXPORT_SYMBOL(udp_rcv);
+ /* ------------------------------------------------------------------------ */
+ #ifdef CONFIG_PROC_FS
+ 
+diff --git a/net/ipv4/udp_redirect_symb.c b/net/ipv4/udp_redirect_symb.c
+new file mode 100644
+index 0000000..5617e86
+--- /dev/null
++++ b/net/ipv4/udp_redirect_symb.c
+@@ -0,0 +1,186 @@
++/******************************************************************************
++
++                               Copyright (c) 2006
++                            Infineon Technologies AG
++                     Am Campeon 1-12; 81726 Munich, Germany
++
++  THE DELIVERY OF THIS SOFTWARE AS WELL AS THE HEREBY GRANTED NON-EXCLUSIVE,
++  WORLDWIDE LICENSE TO USE, COPY, MODIFY, DISTRIBUTE AND SUBLICENSE THIS
++  SOFTWARE IS FREE OF CHARGE.
++
++  THE LICENSED SOFTWARE IS PROVIDED "AS IS" AND INFINEON EXPRESSLY DISCLAIMS
++  ALL REPRESENTATIONS AND WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING
++  WITHOUT LIMITATION, WARRANTIES OR REPRESENTATIONS OF WORKMANSHIP,
++  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, DURABILITY, THAT THE
++  OPERATING OF THE LICENSED SOFTWARE WILL BE ERROR FREE OR FREE OF ANY THIRD
++  PARTY CLAIMS, INCLUDING WITHOUT LIMITATION CLAIMS OF THIRD PARTY INTELLECTUAL
++  PROPERTY INFRINGEMENT.
++
++  EXCEPT FOR ANY LIABILITY DUE TO WILFUL ACTS OR GROSS NEGLIGENCE AND EXCEPT
++  FOR ANY PERSONAL INJURY INFINEON SHALL IN NO EVENT BE LIABLE FOR ANY CLAIM
++  OR DAMAGES OF ANY KIND, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
++  ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
++  DEALINGS IN THE SOFTWARE.
++
++******************************************************************************/
++#if defined(CONFIG_IFX_UDP_REDIRECT) || defined(CONFIG_IFX_UDP_REDIRECT_MODULE)
++/* ============================= */
++/* Includes                      */
++/* ============================= */
++#include <net/checksum.h>
++#include <net/udp.h>
++#include <linux/module.h>
++#include <linux/skbuff.h>
++#include <linux/udp_redirect.h>
++
++/* ============================= */
++/* Global variable definition    */
++/* ============================= */
++int (*udpredirect_getfrag_fn) (void *p, char * to, int offset,
++                               int fraglen, int odd, struct sk_buff *skb) = NULL;
++int (*udp_do_redirect_fn)(struct sock *sk, struct sk_buff *skb) = NULL;
++
++/* ============================= */
++/* Local type definitions        */
++/* ============================= */
++struct udpfakehdr
++{
++  struct udphdr uh;
++  u32 saddr;
++  u32 daddr;
++  struct iovec *iov;
++  u32 wcheck;
++};
++
++/* ============================= */
++/* Local function declaration    */
++/* ============================= */
++static int udpredirect_csum_partial_copy_fromiovecend(unsigned char *kdata,
++              struct iovec *iov, int offset, unsigned int len, __wsum *csump);
++
++static int udpredirect_memcpy_fromiovecend(unsigned char *kdata, struct iovec *iov, int offset,
++                        int len);
++
++/* ============================= */
++/* Global function definition    */
++/* ============================= */
++
++/*
++   Copy of udp_getfrag() from udp.c
++   This function exists because no copy_from_user() is needed for udpredirect.
++*/
++
++int
++udpredirect_getfrag(void *from, char *to, int offset, int len, int odd, struct sk_buff *skb)
++{
++   struct iovec *iov = from;
++
++        if (skb->ip_summed == CHECKSUM_PARTIAL) {
++                if (udpredirect_memcpy_fromiovecend(to, iov, offset, len) < 0)
++                        return -EFAULT;
++        } else {
++                __wsum csum = 0;
++                if (udpredirect_csum_partial_copy_fromiovecend(to, iov, offset, len, &csum) < 0)
++                        return -EFAULT;
++                skb->csum = csum_block_add(skb->csum, csum, odd);
++        }
++        return 0;
++}
++
++static int udpredirect_memcpy_fromiovecend(unsigned char *kdata, struct iovec *iov, int offset,
++                        int len)
++{
++        /* Skip over the finished iovecs */
++        while (offset >= iov->iov_len) {
++                offset -= iov->iov_len;
++                iov++;
++        }
++
++        while (len > 0) {
++                u8 __user *base = iov->iov_base + offset;
++                int copy = min_t(unsigned int, len, iov->iov_len - offset);
++
++                offset = 0;
++                memcpy(kdata, base, copy);
++                len -= copy;
++                kdata += copy;
++                iov++;
++        }
++
++        return 0;
++}
++
++/*
++   Copy of csum_partial_copy_fromiovecend() from iovec.c
++   This function exists because no copy_from_user() is needed for udpredirect.
++*/
++
++int udpredirect_csum_partial_copy_fromiovecend(unsigned char *kdata, struct iovec *iov,
++				 int offset, unsigned int len, __wsum *csump)
++{
++	__wsum csum = *csump;
++	int partial_cnt = 0, err = 0;
++
++	/* Skip over the finished iovecs */
++	while (offset >= iov->iov_len) {
++		offset -= iov->iov_len;
++		iov++;
++	}
++
++	while (len > 0) {
++		u8 __user *base = iov->iov_base + offset;
++		int copy = min_t(unsigned int, len, iov->iov_len - offset);
++
++		offset = 0;
++
++		/* There is a remnant from previous iov. */
++		if (partial_cnt) {
++			int par_len = 4 - partial_cnt;
++
++			/* iov component is too short ... */
++			if (par_len > copy) {
++				memcpy(kdata, base, copy);
++				kdata += copy;
++				base  += copy;
++				partial_cnt += copy;
++				len   -= copy;
++				iov++;
++				if (len)
++					continue;
++				*csump = csum_partial(kdata - partial_cnt,
++							 partial_cnt, csum);
++				goto out;
++			}
++			memcpy(kdata, base, par_len);
++			csum = csum_partial(kdata - partial_cnt, 4, csum);
++			kdata += par_len;
++			base  += par_len;
++			copy  -= par_len;
++			len   -= par_len;
++			partial_cnt = 0;
++		}
++
++		if (len > copy) {
++			partial_cnt = copy % 4;
++			if (partial_cnt) {
++				copy -= partial_cnt;
++				memcpy(kdata + copy, base + copy, partial_cnt);
++			}
++		}
++
++		if (copy) {
++			csum = csum_partial_copy_nocheck(base, kdata, copy, csum);
++		}
++		len   -= copy + partial_cnt;
++		kdata += copy + partial_cnt;
++		iov++;
++	}
++        *csump = csum;
++out:
++	return err;
++}
++
++EXPORT_SYMBOL(udpredirect_getfrag);
++EXPORT_SYMBOL(udp_do_redirect_fn);
++EXPORT_SYMBOL(udpredirect_getfrag_fn);
++#endif /* CONFIG_IFX_UDP_REDIRECT* */
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0056-MIPS-lantiq-cache-split.patch b/target/linux/lantiq/patches-3.3/0056-MIPS-lantiq-cache-split.patch
new file mode 100644
index 0000000000..22cc4b00b7
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0056-MIPS-lantiq-cache-split.patch
@@ -0,0 +1,321 @@
+From d137c7d096436ed5673d1555687423d627a07086 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 29 Sep 2011 20:31:54 +0200
+Subject: [PATCH 56/70] MIPS: lantiq: cache split
+
+---
+ arch/mips/Kconfig      |   22 ++++++
+ arch/mips/kernel/vpe.c |   66 ++++++++++++++++++
+ arch/mips/mm/c-r4k.c   |  172 ++++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 260 insertions(+), 0 deletions(-)
+
+diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
+index 4a36923..df21d0d 100644
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -1942,6 +1942,28 @@ config IFX_VPE_EXT
+ 	help
+ 	  IFX included extensions in APRP
+ 
++config IFX_VPE_CACHE_SPLIT
++	bool "IFX Cache Split Ways"
++	depends on IFX_VPE_EXT
++	help
++	  IFX extension for reserving (splitting) cache ways among VPEs. You must
++	  give kernel command line arguments vpe_icache_shared=0 or
++	  vpe_dcache_shared=0 to enable splitting of icache or dcache
++	  respectively. Then you can specify which cache ways should be
++	  assigned to which VPE. There are total 8 cache ways, 4 each
++	  for dcache and icache: dcache_way0, dcache_way1,dcache_way2,
++	  dcache_way3 and icache_way0,icache_way1, icache_way2,icache_way3.
++
++	  For example, if you specify vpe_icache_shared=0 and icache_way2=1,
++	  then the 3rd icache way will be assigned to VPE0 and denied in VPE1.
++
++	  For icache, software is required to make at least one cache way available
++	  for a VPE at all times i.e., one can't assign all the icache ways to one
++	  VPE.
++
++	  By default, vpe_dcache_shared and vpe_icache_shared are set to 1
++	  (i.e., both icache and dcache are shared among VPEs)
++
+ config PERFCTRS
+ 	bool "34K Performance counters"
+ 	depends on MIPS_MT && PROC_FS
+diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
+index e338ba5..0511d11 100644
+--- a/arch/mips/kernel/vpe.c
++++ b/arch/mips/kernel/vpe.c
+@@ -127,6 +127,13 @@ __setup("vpe1_wdog_timeout=", wdog_timeout);
+ EXPORT_SYMBOL(vpe1_wdog_timeout);
+ 
+ #endif
++
++#ifdef CONFIG_IFX_VPE_CACHE_SPLIT /* Code for splitting the cache ways among VPEs. */
++extern int vpe_icache_shared,vpe_dcache_shared;
++extern int icache_way0,icache_way1,icache_way2,icache_way3;
++extern int dcache_way0,dcache_way1,dcache_way2,dcache_way3;
++#endif
++
+ /* grab the likely amount of memory we will need. */
+ #ifdef CONFIG_MIPS_VPE_LOADER_TOM
+ #define P_SIZE (2 * 1024 * 1024)
+@@ -865,6 +872,65 @@ static int vpe_run(struct vpe * v)
+ 	/* enable this VPE */
+ 	write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
+ 
++#ifdef CONFIG_IFX_VPE_CACHE_SPLIT
++	if ( (!vpe_icache_shared) || (!vpe_dcache_shared) ) {
++
++		/* PCP bit must be 1 to split the cache */
++		if(read_c0_mvpconf0() & MVPCONF0_PCP) {
++
++			if ( !vpe_icache_shared ){
++				write_vpe_c0_vpeconf0((read_vpe_c0_vpeconf0()) & ~VPECONF0_ICS);
++
++				/*
++				 * If any cache way is 1, then that way is denied
++				 * in VPE1. Otherwise assign that way to VPE1.
++				 */
++				if (!icache_way0)
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_IWX0 );
++				else
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_IWX0 );
++				if (!icache_way1)
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_IWX1 );
++				else
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_IWX1 );
++				if (!icache_way2)
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_IWX2 );
++				else
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_IWX2 );
++				if (!icache_way3)
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_IWX3 );
++				else
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_IWX3 );
++			}
++
++			if ( !vpe_dcache_shared ) {
++				write_vpe_c0_vpeconf0((read_vpe_c0_vpeconf0()) & ~VPECONF0_DCS);
++
++				/*
++				 * If any cache way is 1, then that way is denied
++				 * in VPE1. Otherwise assign that way to VPE1.
++				 */
++				if (!dcache_way0)
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_DWX0 );
++				else
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_DWX0 );
++				if (!dcache_way1)
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_DWX1 );
++				else
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_DWX1 );
++				if (!dcache_way2)
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_DWX2 );
++				else
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_DWX2 );
++				if (!dcache_way3)
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_DWX3 );
++				else
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_DWX3 );
++			}
++		}
++	}
++#endif /* endif CONFIG_IFX_VPE_CACHE_SPLIT */
++
+ 	/* clear out any left overs from a previous program */
+ 	write_vpe_c0_status(0);
+ 	write_vpe_c0_cause(0);
+diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
+index 4f9eb0b..9e9f925 100644
+--- a/arch/mips/mm/c-r4k.c
++++ b/arch/mips/mm/c-r4k.c
+@@ -1386,6 +1386,106 @@ static int __init setcoherentio(char *str)
+ __setup("coherentio", setcoherentio);
+ #endif
+ 
++#ifdef CONFIG_IFX_VPE_CACHE_SPLIT /* Code for splitting the cache ways among VPEs. */
++
++#include <asm/mipsmtregs.h>
++
++/*
++ * By default, vpe_icache_shared and vpe_dcache_shared
++ * values are 1 i.e., both icache and dcache are shared
++ * among the VPEs.
++ */
++
++int vpe_icache_shared = 1;
++static int __init vpe_icache_shared_val(char *str)
++{
++	get_option(&str, &vpe_icache_shared);
++	return 1;
++}
++__setup("vpe_icache_shared=", vpe_icache_shared_val);
++EXPORT_SYMBOL(vpe_icache_shared);
++
++int vpe_dcache_shared = 1;
++static int __init vpe_dcache_shared_val(char *str)
++{
++	get_option(&str, &vpe_dcache_shared);
++	return 1;
++}
++__setup("vpe_dcache_shared=", vpe_dcache_shared_val);
++EXPORT_SYMBOL(vpe_dcache_shared);
++
++/*
++ * Software is required to make atleast one icache
++ * way available for a VPE at all times i.e., one
++ * can't assign all the icache ways to one VPE.
++ */
++
++int icache_way0 = 0;
++static int __init icache_way0_val(char *str)
++{
++	get_option(&str, &icache_way0);
++	return 1;
++}
++__setup("icache_way0=", icache_way0_val);
++
++int icache_way1 = 0;
++static int __init icache_way1_val(char *str)
++{
++	get_option(&str, &icache_way1);
++	return 1;
++}
++__setup("icache_way1=", icache_way1_val);
++
++int icache_way2 = 0;
++static int __init icache_way2_val(char *str)
++{
++	get_option(&str, &icache_way2);
++	return 1;
++}
++__setup("icache_way2=", icache_way2_val);
++
++int icache_way3 = 0;
++static int __init icache_way3_val(char *str)
++{
++	get_option(&str, &icache_way3);
++	return 1;
++}
++__setup("icache_way3=", icache_way3_val);
++
++int dcache_way0 = 0;
++static int __init dcache_way0_val(char *str)
++{
++	get_option(&str, &dcache_way0);
++	return 1;
++}
++__setup("dcache_way0=", dcache_way0_val);
++
++int dcache_way1 = 0;
++static int __init dcache_way1_val(char *str)
++{
++	get_option(&str, &dcache_way1);
++	return 1;
++}
++__setup("dcache_way1=", dcache_way1_val);
++
++int dcache_way2 = 0;
++static int __init dcache_way2_val(char *str)
++{
++	get_option(&str, &dcache_way2);
++	return 1;
++}
++__setup("dcache_way2=", dcache_way2_val);
++
++int dcache_way3 = 0;
++static int __init dcache_way3_val(char *str)
++{
++	get_option(&str, &dcache_way3);
++	return 1;
++}
++__setup("dcache_way3=", dcache_way3_val);
++
++#endif /* endif CONFIG_IFX_VPE_CACHE_SPLIT */
++
+ void __cpuinit r4k_cache_init(void)
+ {
+ 	extern void build_clear_page(void);
+@@ -1405,6 +1505,78 @@ void __cpuinit r4k_cache_init(void)
+ 		break;
+ 	}
+ 
++#ifdef CONFIG_IFX_VPE_CACHE_SPLIT
++	/*
++	 * We split the cache ways appropriately among the VPEs
++	 * based on cache ways values we received as command line
++	 * arguments
++	 */
++	if ( (!vpe_icache_shared) || (!vpe_dcache_shared) ){
++
++		/* PCP bit must be 1 to split the cache */
++		if(read_c0_mvpconf0() & MVPCONF0_PCP) {
++
++			/* Set CPA bit which enables us to modify VPEOpt register */
++			write_c0_mvpcontrol((read_c0_mvpcontrol()) | MVPCONTROL_CPA);
++
++			if ( !vpe_icache_shared ){
++				write_c0_vpeconf0((read_c0_vpeconf0()) & ~VPECONF0_ICS);
++				/*
++				 * If any cache way is 1, then that way is denied
++				 * in VPE0. Otherwise assign that way to VPE0.
++				 */
++				printk(KERN_DEBUG "icache is split\n");
++				printk(KERN_DEBUG "icache_way0=%d icache_way1=%d icache_way2=%d icache_way3=%d\n",
++					icache_way0, icache_way1,icache_way2, icache_way3);
++				if (icache_way0)
++					write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_IWX0 );
++				else
++					write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_IWX0 );
++				if (icache_way1)
++					write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_IWX1 );
++				else
++					write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_IWX1 );
++				if (icache_way2)
++					write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_IWX2 );
++				else
++					write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_IWX2 );
++				if (icache_way3)
++					write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_IWX3 );
++				else
++					write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_IWX3 );
++			}
++
++			if ( !vpe_dcache_shared ) {
++				/*
++				 * If any cache way is 1, then that way is denied
++				 * in VPE0. Otherwise assign that way to VPE0.
++				 */
++				printk(KERN_DEBUG "dcache is split\n");
++				printk(KERN_DEBUG "dcache_way0=%d dcache_way1=%d dcache_way2=%d dcache_way3=%d\n",
++					dcache_way0, dcache_way1, dcache_way2, dcache_way3);
++				write_c0_vpeconf0((read_c0_vpeconf0()) & ~VPECONF0_DCS);
++				if (dcache_way0)
++					write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_DWX0 );
++				else
++					write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_DWX0 );
++				if (dcache_way1)
++					write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_DWX1 );
++				else
++					write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_DWX1 );
++				if (dcache_way2)
++					write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_DWX2 );
++				else
++					write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_DWX2 );
++				if (dcache_way3)
++					write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_DWX3 );
++				else
++					write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_DWX3 );
++			}
++		}
++	}
++
++#endif /* endif CONFIG_IFX_VPE_CACHE_SPLIT */
++
+ 	probe_pcache();
+ 	setup_scache();
+ 
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0057-MIPS-clean-up-clock-code.patch b/target/linux/lantiq/patches-3.3/0057-MIPS-clean-up-clock-code.patch
new file mode 100644
index 0000000000..134fddb067
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0057-MIPS-clean-up-clock-code.patch
@@ -0,0 +1,319 @@
+From 580d6aef484b22b5da88588d9a2d944b4f06dc98 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 20 Mar 2012 08:26:04 +0100
+Subject: [PATCH 57/70] MIPS: clean up clock code
+
+---
+ arch/mips/lantiq/clk.c          |   11 +++
+ arch/mips/lantiq/clk.h          |    3 +-
+ arch/mips/lantiq/xway/devices.c |    2 +-
+ arch/mips/lantiq/xway/sysctrl.c |  166 ++++++++++++++++++++++++++++++---------
+ 4 files changed, 143 insertions(+), 39 deletions(-)
+
+diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c
+index 84a201e..5494b6e 100644
+--- a/arch/mips/lantiq/clk.c
++++ b/arch/mips/lantiq/clk.c
+@@ -44,6 +44,7 @@ struct clk *clk_get_fpi(void)
+ {
+ 	return &cpu_clk_generic[1];
+ }
++EXPORT_SYMBOL_GPL(clk_get_fpi);
+ 
+ struct clk *clk_get_io(void)
+ {
+@@ -70,6 +71,16 @@ unsigned long clk_get_rate(struct clk *clk)
+ }
+ EXPORT_SYMBOL(clk_get_rate);
+ 
++int clk_set_rate(struct clk *clk, unsigned long rate)
++{
++	if (unlikely(!clk_good(clk)))
++		return 0;
++
++	clk->rate = rate;
++	return 0;
++}
++EXPORT_SYMBOL(clk_set_rate);
++
+ int clk_enable(struct clk *clk)
+ {
+ 	if (unlikely(!clk_good(clk)))
+diff --git a/arch/mips/lantiq/clk.h b/arch/mips/lantiq/clk.h
+index d047768..b34e675 100644
+--- a/arch/mips/lantiq/clk.h
++++ b/arch/mips/lantiq/clk.h
+@@ -12,6 +12,7 @@
+ #include <linux/clkdev.h>
+ 
+ /* clock speeds */
++#define CLOCK_33M	33333333
+ #define CLOCK_60M	60000000
+ #define CLOCK_62_5M	62500000
+ #define CLOCK_83M	83333333
+@@ -38,9 +39,9 @@
+ struct clk {
+ 	struct clk_lookup cl;
+ 	unsigned long rate;
+-	unsigned long (*get_rate) (void);
+ 	unsigned int module;
+ 	unsigned int bits;
++	unsigned long (*get_rate) (void);
+ 	int (*enable) (struct clk *clk);
+ 	void (*disable) (struct clk *clk);
+ 	int (*activate) (struct clk *clk);
+diff --git a/arch/mips/lantiq/xway/devices.c b/arch/mips/lantiq/xway/devices.c
+index e6d45bc..5d4650d 100644
+--- a/arch/mips/lantiq/xway/devices.c
++++ b/arch/mips/lantiq/xway/devices.c
+@@ -59,7 +59,7 @@ static struct resource ltq_stp_resource =
+ 
+ void __init ltq_register_gpio_stp(void)
+ {
+-	platform_device_register_simple("ltq_stp", 0, &ltq_stp_resource, 1);
++	platform_device_register_simple("ltq_stp", -1, &ltq_stp_resource, 1);
+ }
+ 
+ /* asc ports - amazon se has its own serial mapping */
+diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
+index ac7383f..9df048c 100644
+--- a/arch/mips/lantiq/xway/sysctrl.c
++++ b/arch/mips/lantiq/xway/sysctrl.c
+@@ -16,40 +16,57 @@
+ #include "../devices.h"
+ 
+ /* clock control register */
+-#define LTQ_CGU_IFCCR	0x0018
++#define CGU_IFCCR	0x0018
+ /* system clock register */
+-#define LTQ_CGU_SYS     0x0010
+-
+-/* the enable / disable registers */
+-#define LTQ_PMU_PWDCR	0x1C
+-#define LTQ_PMU_PWDSR	0x20
+-#define LTQ_PMU_PWDCR1	0x24
+-#define LTQ_PMU_PWDSR1	0x28
+-
+-#define PWDCR(x) ((x) ? (LTQ_PMU_PWDCR1) : (LTQ_PMU_PWDCR))
+-#define PWDSR(x) ((x) ? (LTQ_PMU_PWDSR1) : (LTQ_PMU_PWDSR))
+-
+-/* CGU - clock generation unit */
+-#define CGU_EPHY		0x10
++#define CGU_SYS		0x0010
++/* pci control register */
++#define CGU_PCICR	0x0034
++/* ephy configuration register */
++#define CGU_EPHY	0x10
++/* power control register */
++#define PMU_PWDCR	0x1C
++/* power status register */
++#define PMU_PWDSR	0x20
++/* power control register */
++#define PMU_PWDCR1	0x24
++/* power status register */
++#define PMU_PWDSR1	0x28
++/* power control register */
++#define PWDCR(x) ((x) ? (PMU_PWDCR1) : (PMU_PWDCR))
++/* power status register */
++#define PWDSR(x) ((x) ? (PMU_PWDSR1) : (PMU_PWDSR))
+ 
+ /* PMU - power management unit */
+-#define PMU_DMA			0x0020
+-#define PMU_SPI			0x0100
+-#define PMU_EPHY		0x0080
+-#define PMU_USB			0x8041
+-#define PMU_STP			0x0800
+-#define PMU_GPT			0x1000
+-#define PMU_PPE			0x2000
+-#define PMU_FPI			0x4000
+-#define PMU_SWITCH		0x10000000
+-#define PMU_AHBS		0x2000
+-#define PMU_AHBM		0x8000
+-#define PMU_PCIE_CLK            0x80000000
+-
+-#define PMU1_PCIE_PHY		0x0001
+-#define PMU1_PCIE_CTL		0x0002
+-#define PMU1_PCIE_MSI		0x0020
+-#define PMU1_PCIE_PDI		0x0010
++#define PMU_USB0_P	BIT(0)
++#define PMU_PCI		BIT(4)
++#define PMU_DMA		BIT(5)
++#define PMU_USB0	BIT(5)
++#define PMU_SPI		BIT(8)
++#define PMU_EPHY	BIT(7)
++#define PMU_EBU		BIT(10)
++#define PMU_STP		BIT(11)
++#define PMU_GPT		BIT(12)
++#define PMU_PPE		BIT(13)
++#define PMU_AHBS	BIT(13) /* vr9 */
++#define PMU_FPI		BIT(14)
++#define PMU_AHBM	BIT(15)
++#define PMU_PPE_QSB	BIT(18)
++#define PMU_PPE_SLL01	BIT(19)
++#define PMU_PPE_TC	BIT(21)
++#define PMU_PPE_EMA	BIT(22)
++#define PMU_PPE_DPLUM	BIT(23)
++#define PMU_PPE_DPLUS	BIT(24)
++#define PMU_USB1_P	BIT(26)
++#define PMU_USB1	BIT(27)
++#define PMU_SWITCH	BIT(28)
++#define PMU_PPE_TOP	BIT(29)
++#define PMU_GPHY	BIT(30)
++#define PMU_PCIE_CLK	BIT(31)
++
++#define PMU1_PCIE_PHY	BIT(0)
++#define PMU1_PCIE_CTL	BIT(1)
++#define PMU1_PCIE_PDI	BIT(4)
++#define PMU1_PCIE_MSI	BIT(5)
+ 
+ #define ltq_pmu_w32(x, y)	ltq_w32((x), ltq_pmu_membase + (y))
+ #define ltq_pmu_r32(x)		ltq_r32(ltq_pmu_membase + (x))
+@@ -69,13 +86,13 @@ static void __iomem *ltq_pmu_membase;
+ 
+ static int ltq_cgu_enable(struct clk *clk)
+ {
+-	ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | clk->bits, LTQ_CGU_IFCCR);
++	ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) | clk->bits, CGU_IFCCR);
+ 	return 0;
+ }
+ 
+ static void ltq_cgu_disable(struct clk *clk)
+ {
+-	ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~clk->bits, LTQ_CGU_IFCCR);
++	ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) & ~clk->bits, CGU_IFCCR);
+ }
+ 
+ static int ltq_pmu_enable(struct clk *clk)
+@@ -94,9 +111,49 @@ static int ltq_pmu_enable(struct clk *clk)
+ 
+ static void ltq_pmu_disable(struct clk *clk)
+ {
+-	ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) | clk->bits, LTQ_PMU_PWDCR);
++	ltq_pmu_w32(ltq_pmu_r32(PWDCR(clk->module)) | clk->bits,
++		PWDCR(clk->module));
++}
++
++static int ltq_pci_enable(struct clk *clk)
++{
++	unsigned int ifccr = ltq_cgu_r32(CGU_IFCCR);
++	/* set clock bus speed */
++	if (ltq_is_ar9()) {
++		ifccr &= ~0x1f00000;
++		if (clk->rate == CLOCK_33M)
++			ifccr |= 0xe00000;
++		else
++			ifccr |= 0x700000; /* 62.5M */
++	} else {
++		ifccr &= ~0xf00000;
++		if (clk->rate == CLOCK_33M)
++			ifccr |= 0x800000;
++		else
++			ifccr |= 0x400000; /* 62.5M */
++	}
++	ltq_cgu_w32(ifccr, CGU_IFCCR);
++	return 0;
++}
++
++static int ltq_pci_ext_enable(struct clk *clk)
++{
++	/* enable external pci clock */
++	ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) & ~(1 << 16),
++		CGU_IFCCR);
++	ltq_cgu_w32((1 << 30), CGU_PCICR);
++	return 0;
++}
++
++static void ltq_pci_ext_disable(struct clk *clk)
++{
++	/* enable external pci clock */
++	ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) | (1 << 16),
++		CGU_IFCCR);
++	ltq_cgu_w32((1 << 31) | (1 << 30), CGU_PCICR);
+ }
+ 
++/* manage the clock gates via PMU */
+ static inline void clkdev_add_pmu(const char *dev, const char *con,
+ 					unsigned int module, unsigned int bits)
+ {
+@@ -112,6 +169,7 @@ static inline void clkdev_add_pmu(const char *dev, const char *con,
+ 	clkdev_add(&clk->cl);
+ }
+ 
++/* manage the clock generator */
+ static inline void clkdev_add_cgu(const char *dev, const char *con,
+ 					unsigned int bits)
+ {
+@@ -126,6 +184,33 @@ static inline void clkdev_add_cgu(const char *dev, const char *con,
+ 	clkdev_add(&clk->cl);
+ }
+ 
++/* pci needs its own enable function */
++static inline void clkdev_add_pci(void)
++{
++	struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
++	struct clk *clk_ext = kzalloc(sizeof(struct clk), GFP_KERNEL);
++
++	/* main pci clock */
++	clk->cl.dev_id = "ltq_pci";
++	clk->cl.con_id = NULL;
++	clk->cl.clk = clk;
++	clk->rate = CLOCK_33M;
++	clk->enable = ltq_pci_enable;
++	clk->disable = ltq_pmu_disable;
++	clk->module = 0;
++	clk->bits = PMU_PCI;
++	clkdev_add(&clk->cl);
++
++	/* use internal/external bus clock */
++	clk_ext->cl.dev_id = "ltq_pci";
++	clk_ext->cl.con_id = "external";
++	clk_ext->cl.clk = clk_ext;
++	clk_ext->enable = ltq_pci_ext_enable;
++	clk_ext->disable = ltq_pci_ext_disable;
++	clkdev_add(&clk_ext->cl);
++
++}
++
+ void __init ltq_soc_init(void)
+ {
+ 	ltq_pmu_membase = ltq_remap_resource(&ltq_pmu_resource);
+@@ -144,14 +229,16 @@ void __init ltq_soc_init(void)
+ 	ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0);
+ 
+ 	/* add our clocks */
++	clkdev_add_pmu("ltq_fpi", NULL, 0, PMU_FPI);
+ 	clkdev_add_pmu("ltq_dma", NULL, 0, PMU_DMA);
+ 	clkdev_add_pmu("ltq_stp", NULL, 0, PMU_STP);
+ 	clkdev_add_pmu("ltq_spi", NULL, 0, PMU_SPI);
+         clkdev_add_pmu("ltq_gptu", NULL, 0, PMU_GPT);
++        clkdev_add_pmu("ltq_ebu", NULL, 0, PMU_EBU);
+ 	if (!ltq_is_vr9())
+ 		clkdev_add_pmu("ltq_etop", NULL, 0, PMU_PPE);
+ 	if (ltq_is_ase()) {
+-		if (ltq_cgu_r32(LTQ_CGU_SYS) & (1 << 5))
++		if (ltq_cgu_r32(CGU_SYS) & (1 << 5))
+ 			clkdev_add_static(CLOCK_266M, CLOCK_133M, CLOCK_133M);
+ 		else
+ 			clkdev_add_static(CLOCK_133M, CLOCK_133M, CLOCK_133M);
+@@ -166,11 +253,16 @@ void __init ltq_soc_init(void)
+ 		clkdev_add_pmu("ltq_pcie", "pdi", 1, PMU1_PCIE_PDI);
+ 		clkdev_add_pmu("ltq_pcie", "ctl", 1, PMU1_PCIE_CTL);
+ 		clkdev_add_pmu("ltq_pcie", "ahb", 0, PMU_AHBM | PMU_AHBS);
+-		clkdev_add_pmu("usb0", NULL, 0, (1<<6) | 1);
+-		clkdev_add_pmu("usb1", NULL, 0, (1<<26) | (1<<27));
++		clkdev_add_pmu("usb0", NULL, 0, PMU_USB0 | PMU_USB0_P);
++		clkdev_add_pmu("usb1", NULL, 0, PMU_USB1 | PMU_USB1_P);
++		clkdev_add_pmu("ltq_vrx200", NULL, 0,
++			PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM |
++			PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
++			PMU_PPE_QSB);
+ 	} else {
+ 		clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
+ 					ltq_danube_io_region_clock());
++		clkdev_add_pci();
+ 		if (ltq_is_ar9())
+ 			clkdev_add_pmu("ltq_etop", "switch", 0, PMU_SWITCH);
+ 	}
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0058-MIPS-cleanup-reset-code.patch b/target/linux/lantiq/patches-3.3/0058-MIPS-cleanup-reset-code.patch
new file mode 100644
index 0000000000..b91a01d0c1
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0058-MIPS-cleanup-reset-code.patch
@@ -0,0 +1,103 @@
+From f2e6a9e24af6d3e3ca14e66269c9621cecb9836b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 16 Mar 2012 15:49:32 +0100
+Subject: [PATCH 58/70] MIPS: cleanup reset code
+
+---
+ arch/mips/lantiq/xway/reset.c |   59 ++++++++++++++++++++++++++++++++++------
+ 1 files changed, 50 insertions(+), 9 deletions(-)
+
+diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c
+index c705bbf..abdf9b1 100644
+--- a/arch/mips/lantiq/xway/reset.c
++++ b/arch/mips/lantiq/xway/reset.c
+@@ -11,6 +11,7 @@
+ #include <linux/ioport.h>
+ #include <linux/pm.h>
+ #include <linux/export.h>
++#include <linux/delay.h>
+ #include <asm/reboot.h>
+ 
+ #include <lantiq_soc.h>
+@@ -20,12 +21,45 @@
+ #define ltq_rcu_w32(x, y)	ltq_w32((x), ltq_rcu_membase + (y))
+ #define ltq_rcu_r32(x)		ltq_r32(ltq_rcu_membase + (x))
+ 
+-/* register definitions */
+-#define LTQ_RCU_RST		0x0010
+-#define LTQ_RCU_RST_ALL		0x40000000
+-
+-#define LTQ_RCU_RST_STAT	0x0014
+-#define LTQ_RCU_STAT_SHIFT	26
++/* reset request register */
++#define RCU_RST_REQ	0x0010
++/* reset status register */
++#define RCU_RST_STAT	0x0014
++
++/* reset cause */
++#define RCU_STAT_SHIFT	26
++/* Global SW Reset */
++#define RCU_RD_SRST		BIT(30)
++/* Memory Controller */
++#define RCU_RD_MC		BIT(14)
++/* PCI core */
++#define RCU_RD_PCI		BIT(13)
++/* Voice DFE/AFE */
++#define RCU_RD_DFE_AFE		BIT(12)
++/* DSL AFE */
++#define RCU_RD_DSL_AFE		BIT(11)
++/* SDIO core */
++#define RCU_RD_SDIO		BIT(10)
++/* DMA core */
++#define RCU_RD_DMA		BIT(9)
++/* PPE core */
++#define RCU_RD_PPE		BIT(8)
++/* ARC/DFE core */
++#define RCU_RD_ARC_DFE		BIT(7)
++/* AHB bus */
++#define RCU_RD_AHB		BIT(6)
++/* Ethernet MAC1 */
++#define RCU_RD_ENET_MAC1	BIT(5)
++/* USB and Phy core */
++#define RCU_RD_USB		BIT(4)
++/* CPU1 subsystem */
++#define RCU_RD_CPU1		BIT(3)
++/* FPI bus */
++#define RCU_RD_FPI		BIT(2)
++/* CPU0 subsystem */
++#define RCU_RD_CPU0		BIT(1)
++/* HW reset via HRST pin */
++#define RCU_RD_HRST		BIT(0)
+ 
+ static struct resource ltq_rcu_resource =
+ 	MEM_RES("rcu", LTQ_RCU_BASE_ADDR, LTQ_RCU_SIZE);
+@@ -36,16 +70,23 @@ static void __iomem *ltq_rcu_membase;
+ /* This function is used by the watchdog driver */
+ int ltq_reset_cause(void)
+ {
+-	u32 val = ltq_rcu_r32(LTQ_RCU_RST_STAT);
+-	return val >> LTQ_RCU_STAT_SHIFT;
++	u32 val = ltq_rcu_r32(RCU_RST_STAT);
++	return val >> RCU_STAT_SHIFT;
+ }
+ EXPORT_SYMBOL_GPL(ltq_reset_cause);
+ 
++void ltq_reset_once(unsigned int module, ulong usec)
++{
++	ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | module, RCU_RST_REQ);
++	udelay(usec);
++	ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~module, RCU_RST_REQ);
++}
++
+ static void ltq_machine_restart(char *command)
+ {
+ 	pr_notice("System restart\n");
+ 	local_irq_disable();
+-	ltq_rcu_w32(ltq_rcu_r32(LTQ_RCU_RST) | LTQ_RCU_RST_ALL, LTQ_RCU_RST);
++	ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | RCU_RD_SRST, RCU_RST_REQ);
+ 	unreachable();
+ }
+ 
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0059-MIPS-lantiq-fixes-ar9-vr9-clock.patch b/target/linux/lantiq/patches-3.3/0059-MIPS-lantiq-fixes-ar9-vr9-clock.patch
new file mode 100644
index 0000000000..7197a12504
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0059-MIPS-lantiq-fixes-ar9-vr9-clock.patch
@@ -0,0 +1,116 @@
+From bbe68381c786d73ff4dc8b8b10deaa9db7700a9d Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 17 Mar 2012 09:58:07 +0100
+Subject: [PATCH 59/70] MIPS: lantiq: fixes ar9/vr9 clock
+
+---
+ arch/mips/lantiq/clk.h          |    4 +++-
+ arch/mips/lantiq/xway/clk.c     |   29 ++++++++++++++++++++++++-----
+ arch/mips/lantiq/xway/sysctrl.c |   13 ++++++++-----
+ 3 files changed, 35 insertions(+), 11 deletions(-)
+
+diff --git a/arch/mips/lantiq/clk.h b/arch/mips/lantiq/clk.h
+index b34e675..010dfa7 100644
+--- a/arch/mips/lantiq/clk.h
++++ b/arch/mips/lantiq/clk.h
+@@ -56,8 +56,10 @@ extern unsigned long ltq_danube_cpu_hz(void);
+ extern unsigned long ltq_danube_fpi_hz(void);
+ extern unsigned long ltq_danube_io_region_clock(void);
+ 
++extern unsigned long ltq_ar9_cpu_hz(void);
++extern unsigned long ltq_ar9_fpi_hz(void);
++
+ extern unsigned long ltq_vr9_cpu_hz(void);
+ extern unsigned long ltq_vr9_fpi_hz(void);
+-extern unsigned long ltq_vr9_io_region_clock(void);
+ 
+ #endif
+diff --git a/arch/mips/lantiq/xway/clk.c b/arch/mips/lantiq/xway/clk.c
+index 3635c9f..2bafc04 100644
+--- a/arch/mips/lantiq/xway/clk.c
++++ b/arch/mips/lantiq/xway/clk.c
+@@ -217,6 +217,30 @@ unsigned long ltq_danube_cpu_hz(void)
+ 	}
+ }
+ 
++unsigned long ltq_ar9_sys_hz(void)
++{
++	if (((ltq_cgu_r32(LTQ_CGU_SYS) >> 3) & 0x3) == 0x2)
++		return CLOCK_393M;
++	return CLOCK_333M;
++}
++
++unsigned long ltq_ar9_fpi_hz(void)
++{
++	unsigned long sys = ltq_ar9_sys_hz();
++
++	if (ltq_cgu_r32(LTQ_CGU_SYS) & BIT(0))
++		return sys;
++	return sys >> 1;
++}
++
++unsigned long ltq_ar9_cpu_hz(void)
++{
++	if (ltq_cgu_r32(LTQ_CGU_SYS) & BIT(2))
++		return ltq_ar9_fpi_hz();
++	else
++		return ltq_ar9_sys_hz();
++}
++
+ unsigned long ltq_danube_fpi_hz(void)
+ {
+ 	unsigned long ddr_clock = DDR_HZ;
+@@ -299,11 +323,6 @@ unsigned long ltq_vr9_fpi_hz(void)
+ 	return clk;
+ }
+ 
+-unsigned long ltq_vr9_io_region_clock(void)
+-{
+-	return ltq_vr9_fpi_hz();
+-}
+-
+ unsigned long ltq_vr9_fpi_bus_clock(int fpi)
+ {
+ 	return ltq_vr9_fpi_hz();
+diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
+index 9df048c..6771a7e 100644
+--- a/arch/mips/lantiq/xway/sysctrl.c
++++ b/arch/mips/lantiq/xway/sysctrl.c
+@@ -237,6 +237,8 @@ void __init ltq_soc_init(void)
+         clkdev_add_pmu("ltq_ebu", NULL, 0, PMU_EBU);
+ 	if (!ltq_is_vr9())
+ 		clkdev_add_pmu("ltq_etop", NULL, 0, PMU_PPE);
++	if (!ltq_is_ase())
++		clkdev_add_pci();
+ 	if (ltq_is_ase()) {
+ 		if (ltq_cgu_r32(CGU_SYS) & (1 << 5))
+ 			clkdev_add_static(CLOCK_266M, CLOCK_133M, CLOCK_133M);
+@@ -246,7 +248,7 @@ void __init ltq_soc_init(void)
+ 		clkdev_add_pmu("ltq_etop", "ephy", 0, PMU_EPHY);
+ 	} else if (ltq_is_vr9()) {
+ 		clkdev_add_static(ltq_vr9_cpu_hz(), ltq_vr9_fpi_hz(),
+-					ltq_vr9_io_region_clock());
++			ltq_vr9_fpi_hz());
+ 		clkdev_add_pmu("ltq_pcie", "phy", 1, PMU1_PCIE_PHY);
+ 		clkdev_add_pmu("ltq_pcie", "bus", 0, PMU_PCIE_CLK);
+ 		clkdev_add_pmu("ltq_pcie", "msi", 1, PMU1_PCIE_MSI);
+@@ -259,11 +261,12 @@ void __init ltq_soc_init(void)
+ 			PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM |
+ 			PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
+ 			PMU_PPE_QSB);
++	} else if (ltq_is_ar9()) {
++		clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(),
++			ltq_ar9_fpi_hz());
++		clkdev_add_pmu("ltq_etop", "switch", 0, PMU_SWITCH);
+ 	} else {
+ 		clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
+-					ltq_danube_io_region_clock());
+-		clkdev_add_pci();
+-		if (ltq_is_ar9())
+-			clkdev_add_pmu("ltq_etop", "switch", 0, PMU_SWITCH);
++			ltq_danube_io_region_clock());
+ 	}
+ }
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0060-MIPS-lantiq-fixes-danube-clock.patch b/target/linux/lantiq/patches-3.3/0060-MIPS-lantiq-fixes-danube-clock.patch
new file mode 100644
index 0000000000..549038ba02
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0060-MIPS-lantiq-fixes-danube-clock.patch
@@ -0,0 +1,57 @@
+From e8f13d2824871027e8b6d374a2db3672db043915 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 19 Mar 2012 15:53:37 +0100
+Subject: [PATCH 60/70] MIPS: lantiq: fixes danube clock
+
+---
+ arch/mips/lantiq/xway/clk.c |   20 ++++++++++----------
+ 1 files changed, 10 insertions(+), 10 deletions(-)
+
+diff --git a/arch/mips/lantiq/xway/clk.c b/arch/mips/lantiq/xway/clk.c
+index 2bafc04..5d850dc 100644
+--- a/arch/mips/lantiq/xway/clk.c
++++ b/arch/mips/lantiq/xway/clk.c
+@@ -181,7 +181,7 @@ unsigned long ltq_danube_io_region_clock(void)
+ {
+ 	unsigned int ret = ltq_get_pll0_fosc();
+ 
+-	switch (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & CGU_SYS_DDR_SEL) {
++	switch (ltq_cgu_r32(LTQ_CGU_SYS) & 0x3) {
+ 	default:
+ 	case 0:
+ 		return (ret + 1) / 2;
+@@ -203,6 +203,15 @@ unsigned long ltq_danube_fpi_bus_clock(int fpi)
+ 	return ret;
+ }
+ 
++unsigned long ltq_danube_fpi_hz(void)
++{
++	unsigned long ddr_clock = DDR_HZ;
++
++	if (ltq_cgu_r32(LTQ_CGU_SYS) & 0x40)
++		return ddr_clock >> 1;
++	return ddr_clock;
++}
++
+ unsigned long ltq_danube_cpu_hz(void)
+ {
+ 	switch (ltq_cgu_r32(LTQ_CGU_SYS) & 0xc) {
+@@ -241,15 +250,6 @@ unsigned long ltq_ar9_cpu_hz(void)
+ 		return ltq_ar9_sys_hz();
+ }
+ 
+-unsigned long ltq_danube_fpi_hz(void)
+-{
+-	unsigned long ddr_clock = DDR_HZ;
+-
+-	if (ltq_cgu_r32(LTQ_CGU_SYS) & 0x40)
+-		return ddr_clock >> 1;
+-	return ddr_clock;
+-}
+-
+ unsigned long ltq_vr9_cpu_hz(void)
+ {
+ 	unsigned int cpu_sel;
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0061-MIPS-adds-dsl-clocks.patch b/target/linux/lantiq/patches-3.3/0061-MIPS-adds-dsl-clocks.patch
new file mode 100644
index 0000000000..a0a85ec24e
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0061-MIPS-adds-dsl-clocks.patch
@@ -0,0 +1,66 @@
+From 77da4ad0d8dfe7c5f46a06296a04a992a961c1a3 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 20 Mar 2012 13:05:11 +0100
+Subject: [PATCH 61/70] MIPS: adds dsl clocks
+
+---
+ arch/mips/lantiq/xway/sysctrl.c |   15 +++++++++++++--
+ 1 files changed, 13 insertions(+), 2 deletions(-)
+
+diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
+index 6771a7e..3672fc6 100644
+--- a/arch/mips/lantiq/xway/sysctrl.c
++++ b/arch/mips/lantiq/xway/sysctrl.c
+@@ -41,8 +41,9 @@
+ #define PMU_PCI		BIT(4)
+ #define PMU_DMA		BIT(5)
+ #define PMU_USB0	BIT(5)
++#define PMU_EPHY	BIT(7)	/* ase */
+ #define PMU_SPI		BIT(8)
+-#define PMU_EPHY	BIT(7)
++#define PMU_DFE		BIT(9)
+ #define PMU_EBU		BIT(10)
+ #define PMU_STP		BIT(11)
+ #define PMU_GPT		BIT(12)
+@@ -147,7 +148,7 @@ static int ltq_pci_ext_enable(struct clk *clk)
+ 
+ static void ltq_pci_ext_disable(struct clk *clk)
+ {
+-	/* enable external pci clock */
++	/* disable external pci clock (internal) */
+ 	ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) | (1 << 16),
+ 		CGU_IFCCR);
+ 	ltq_cgu_w32((1 << 31) | (1 << 30), CGU_PCICR);
+@@ -246,6 +247,9 @@ void __init ltq_soc_init(void)
+ 			clkdev_add_static(CLOCK_133M, CLOCK_133M, CLOCK_133M);
+ 		clkdev_add_cgu("ltq_etop", "ephycgu", CGU_EPHY),
+ 		clkdev_add_pmu("ltq_etop", "ephy", 0, PMU_EPHY);
++		clkdev_add_pmu("ltq_dsl", NULL, 0,
++			PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
++			PMU_AHBS | PMU_DFE);
+ 	} else if (ltq_is_vr9()) {
+ 		clkdev_add_static(ltq_vr9_cpu_hz(), ltq_vr9_fpi_hz(),
+ 			ltq_vr9_fpi_hz());
+@@ -261,12 +265,19 @@ void __init ltq_soc_init(void)
+ 			PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM |
+ 			PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
+ 			PMU_PPE_QSB);
++		clkdev_add_pmu("ltq_dsl", NULL, 0, PMU_DFE | PMU_AHBS);
+ 	} else if (ltq_is_ar9()) {
+ 		clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(),
+ 			ltq_ar9_fpi_hz());
+ 		clkdev_add_pmu("ltq_etop", "switch", 0, PMU_SWITCH);
++		clkdev_add_pmu("ltq_dsl", NULL, 0,
++			PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
++			PMU_PPE_QSB | PMU_AHBS | PMU_DFE);
+ 	} else {
+ 		clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
+ 			ltq_danube_io_region_clock());
++		clkdev_add_pmu("ltq_dsl", NULL, 0,
++			PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
++			PMU_PPE_QSB | PMU_AHBS | PMU_DFE);
+ 	}
+ }
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0062-MIPS-lantiq-dont-always-register-asc0.patch b/target/linux/lantiq/patches-3.3/0062-MIPS-lantiq-dont-always-register-asc0.patch
new file mode 100644
index 0000000000..185210f220
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0062-MIPS-lantiq-dont-always-register-asc0.patch
@@ -0,0 +1,31 @@
+From d9acb5a4a0b3781a63f805695319fc8d2d4ec427 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 20 Mar 2012 08:22:11 +0100
+Subject: [PATCH 62/70] MIPS: lantiq: dont always register asc0
+
+---
+ arch/mips/lantiq/xway/prom.c |    6 ++----
+ 1 files changed, 2 insertions(+), 4 deletions(-)
+
+diff --git a/arch/mips/lantiq/xway/prom.c b/arch/mips/lantiq/xway/prom.c
+index e3dcbbd..f776d5a 100644
+--- a/arch/mips/lantiq/xway/prom.c
++++ b/arch/mips/lantiq/xway/prom.c
+@@ -101,12 +101,10 @@ void __init ltq_soc_detect(struct ltq_soc_info *i)
+ 
+ void __init ltq_soc_setup(void)
+ {
+-	if (ltq_is_ase()) {
++	if (ltq_is_ase())
+ 		ltq_register_ase_asc();
+-	} else {
+-		ltq_register_asc(0);
++	else
+ 		ltq_register_asc(1);
+-	}
+ 	ltq_register_gpio();
+ 	ltq_register_wdt();
+ }
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0063-MIPS-lantiq-irqs-were-not-cleared-properly-on-boot.patch b/target/linux/lantiq/patches-3.3/0063-MIPS-lantiq-irqs-were-not-cleared-properly-on-boot.patch
new file mode 100644
index 0000000000..85573284be
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0063-MIPS-lantiq-irqs-were-not-cleared-properly-on-boot.patch
@@ -0,0 +1,34 @@
+From 875a7139535da541aa2e9de308b3f6f791a131d0 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 20 Mar 2012 09:44:27 +0100
+Subject: [PATCH 63/70] MIPS: lantiq: irqs were not cleared properly on boot
+
+---
+ arch/mips/lantiq/irq.c |   10 +++++-----
+ 1 files changed, 5 insertions(+), 5 deletions(-)
+
+diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
+index f17caec..7224231 100644
+--- a/arch/mips/lantiq/irq.c
++++ b/arch/mips/lantiq/irq.c
+@@ -326,12 +326,12 @@ void __init arch_init_irq(void)
+ 			panic("Failed to remap eiu memory\n");
+ 	}
+ 
+-	/* make sure all irqs are turned off by default */
+-	for (i = 0; i < 5; i++)
++	for (i = 0; i < 5; i++) {
++		/* make sure all irqs are turned off by default */
+ 		ltq_icu_w32(0, LTQ_ICU_IM0_IER + (i * LTQ_ICU_OFFSET));
+-
+-	/* clear all possibly pending interrupts */
+-	ltq_icu_w32(~0, LTQ_ICU_IM0_ISR + (i * LTQ_ICU_OFFSET));
++		/* clear all possibly pending interrupts */
++		ltq_icu_w32(~0, LTQ_ICU_IM0_ISR + (i * LTQ_ICU_OFFSET));
++	}
+ 
+ 	mips_cpu_irq_init();
+ 
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0064-MIPS-lantiq-adds-bootsel-helper.patch b/target/linux/lantiq/patches-3.3/0064-MIPS-lantiq-adds-bootsel-helper.patch
new file mode 100644
index 0000000000..d89b3a170f
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0064-MIPS-lantiq-adds-bootsel-helper.patch
@@ -0,0 +1,66 @@
+From 7746053f44b55a7cd914e1b7753cde7ac39e6fd6 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 21 Mar 2012 14:17:37 +0100
+Subject: [PATCH 64/70] MIPS: lantiq: adds bootsel helper
+
+---
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h |   12 ++++++++++++
+ arch/mips/lantiq/xway/reset.c                      |   12 +++++++++++-
+ 2 files changed, 23 insertions(+), 1 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index bfdeb16..1ec8f2a 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -144,6 +144,18 @@
+ #define LTQ_MPS_BASE_ADDR	(KSEG1 + 0x1F107000)
+ #define LTQ_MPS_CHIPID		((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344))
+ 
++/* BOOT_SEL - find what boot media we have */
++#define BS_EXT_ROM	0x0
++#define BS_FLASH	0x1
++#define BS_MII0		0x2
++#define BS_PCI		0x3
++#define BS_UART1	0x4
++#define BS_SPI		0x5
++#define BS_NAND		0x6
++#define BS_RMII0	0x7
++
++extern unsigned char ltq_boot_select(void);
++
+ /* register access macros for EBU and CGU */
+ #define ltq_ebu_w32(x, y)	ltq_w32((x), ltq_ebu_membase + (y))
+ #define ltq_ebu_r32(x)		ltq_r32(ltq_ebu_membase + (x))
+diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c
+index abdf9b1..970ca17 100644
+--- a/arch/mips/lantiq/xway/reset.c
++++ b/arch/mips/lantiq/xway/reset.c
+@@ -27,7 +27,11 @@
+ #define RCU_RST_STAT	0x0014
+ 
+ /* reset cause */
+-#define RCU_STAT_SHIFT	26
++#define RCU_STAT_SHIFT		26
++/* boot selection */
++#define RCU_BOOT_SEL_SHIFT	26
++#define RCU_BOOT_SEL_MASK	0x7
++
+ /* Global SW Reset */
+ #define RCU_RD_SRST		BIT(30)
+ /* Memory Controller */
+@@ -75,6 +79,12 @@ int ltq_reset_cause(void)
+ }
+ EXPORT_SYMBOL_GPL(ltq_reset_cause);
+ 
++unsigned char ltq_boot_select(void)
++{
++	u32 val = ltq_rcu_r32(RCU_RST_STAT);
++	return (val >> RCU_BOOT_SEL_SHIFT) & RCU_BOOT_SEL_MASK;
++}
++
+ void ltq_reset_once(unsigned int module, ulong usec)
+ {
+ 	ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | module, RCU_RST_REQ);
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0065-MIPS-lantiq-adds-USB_ARCH_HAS_HCD-to-CONFIG_LANTIQ.patch b/target/linux/lantiq/patches-3.3/0065-MIPS-lantiq-adds-USB_ARCH_HAS_HCD-to-CONFIG_LANTIQ.patch
new file mode 100644
index 0000000000..c53d009d7e
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0065-MIPS-lantiq-adds-USB_ARCH_HAS_HCD-to-CONFIG_LANTIQ.patch
@@ -0,0 +1,24 @@
+From 495ab2cb0a347dd8270634e42993418eb8122c9e Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 23 Mar 2012 11:28:22 +0100
+Subject: [PATCH 65/70] MIPS: lantiq: adds USB_ARCH_HAS_HCD to CONFIG_LANTIQ
+
+---
+ arch/mips/Kconfig |    1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
+index df21d0d..8d3b920 100644
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -232,6 +232,7 @@ config LANTIQ
+ 	select CLKDEV_LOOKUP
+ 	select HAVE_OPROFILE
+ 	select MIPS_MACHINE
++	select USB_ARCH_HAS_HCD
+ 
+ config LASAT
+ 	bool "LASAT Networks platforms"
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0066-MIPS-lantiq-fixes-bad-PMU_USB0-0-define.patch b/target/linux/lantiq/patches-3.3/0066-MIPS-lantiq-fixes-bad-PMU_USB0-0-define.patch
new file mode 100644
index 0000000000..e711bdd0ef
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0066-MIPS-lantiq-fixes-bad-PMU_USB0-0-define.patch
@@ -0,0 +1,25 @@
+From 307d2969597246720e7fdfad2a28a2561fb0b951 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 5 Apr 2012 21:51:05 +0200
+Subject: [PATCH 66/70] MIPS: lantiq: fixes bad PMU_USB0(0) define
+
+---
+ arch/mips/lantiq/xway/sysctrl.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
+index 3672fc6..5807456 100644
+--- a/arch/mips/lantiq/xway/sysctrl.c
++++ b/arch/mips/lantiq/xway/sysctrl.c
+@@ -40,7 +40,7 @@
+ #define PMU_USB0_P	BIT(0)
+ #define PMU_PCI		BIT(4)
+ #define PMU_DMA		BIT(5)
+-#define PMU_USB0	BIT(5)
++#define PMU_USB0	BIT(6)
+ #define PMU_EPHY	BIT(7)	/* ase */
+ #define PMU_SPI		BIT(8)
+ #define PMU_DFE		BIT(9)
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0067-MIPS-lantiq-fix-dwc_otg-usb-for-ase.patch b/target/linux/lantiq/patches-3.3/0067-MIPS-lantiq-fix-dwc_otg-usb-for-ase.patch
new file mode 100644
index 0000000000..65f3cb05f8
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0067-MIPS-lantiq-fix-dwc_otg-usb-for-ase.patch
@@ -0,0 +1,60 @@
+From 6f421cda8e6e43f74b8f8a7f63db67c6d3ac9ba3 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 11 Apr 2012 18:43:50 +0200
+Subject: [PATCH 67/70] MIPS: lantiq: fix dwc_otg usb for ase
+
+changed irq number and pmu settings. little bit of fiddling to get the now variable
+irq into resources.
+
+Signed-off-by: Conor O'Gorman <i@conorogorman.net>
+---
+ .../mips/include/asm/mach-lantiq/xway/lantiq_irq.h |    1 +
+ drivers/usb/dwc_otg/dwc_otg_driver.c               |    3 +++
+ drivers/usb/dwc_otg/dwc_otg_ifx.c                  |    5 ++++-
+ 3 files changed, 8 insertions(+), 1 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
+index b7f10e6..d9c892b 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
+@@ -36,6 +36,7 @@
+ 
+ #define LTQ_TIMER6_INT		(INT_NUM_IM1_IRL0 + 23)
+ #define LTQ_USB_INT		(INT_NUM_IM1_IRL0 + 22)
++#define LTQ_USB_ASE_INT		(INT_NUM_IM0_IRL0 + 31)
+ #define LTQ_USB_OC_INT		(INT_NUM_IM4_IRL0 + 23)
+ 
+ #define MIPS_CPU_TIMER_IRQ		7
+diff --git a/drivers/usb/dwc_otg/dwc_otg_driver.c b/drivers/usb/dwc_otg/dwc_otg_driver.c
+index 1b0daab..5c64ebb 100644
+--- a/drivers/usb/dwc_otg/dwc_otg_driver.c
++++ b/drivers/usb/dwc_otg/dwc_otg_driver.c
+@@ -860,6 +860,9 @@ static int __init dwc_otg_init(void)
+ 
+     printk(KERN_INFO "%s: version %s\n", dwc_driver_name, DWC_DRIVER_VERSION);
+ 
++    if (ltq_is_ase())
++        dwc_irq = LTQ_USB_ASE_INT;
++
+ 	// ifxmips setup
+     retval = ifx_usb_hc_init(dwc_iomem_base, dwc_irq);
+     if (retval < 0)
+diff --git a/drivers/usb/dwc_otg/dwc_otg_ifx.c b/drivers/usb/dwc_otg/dwc_otg_ifx.c
+index 0a4c209..e45da85 100644
+--- a/drivers/usb/dwc_otg/dwc_otg_ifx.c
++++ b/drivers/usb/dwc_otg/dwc_otg_ifx.c
+@@ -61,7 +61,10 @@ void dwc_otg_power_on (void)
+ 	// clear power
+ 	writel(readl(DANUBE_PMU_PWDCR) | 0x41, DANUBE_PMU_PWDCR);
+ 	// set clock gating
+-	writel(readl(DANUBE_CGU_IFCCR) | 0x30, DANUBE_CGU_IFCCR);
++	if (ltq_is_ase())
++		writel(readl(DANUBE_CGU_IFCCR) & ~0x20, DANUBE_CGU_IFCCR);
++	else
++		writel(readl(DANUBE_CGU_IFCCR) | 0x30, DANUBE_CGU_IFCCR);
+ 	// set power
+ 	writel(readl(DANUBE_PMU_PWDCR) & ~0x1, DANUBE_PMU_PWDCR);
+ 	writel(readl(DANUBE_PMU_PWDCR) & ~0x40, DANUBE_PMU_PWDCR);
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0068-MIPS-lantiq-stp-fix-for-ase-add-get-clock-disabled.patch b/target/linux/lantiq/patches-3.3/0068-MIPS-lantiq-stp-fix-for-ase-add-get-clock-disabled.patch
new file mode 100644
index 0000000000..ffa96cd50f
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0068-MIPS-lantiq-stp-fix-for-ase-add-get-clock-disabled.patch
@@ -0,0 +1,88 @@
+From 0ea046d777bf567cfd89c7d968c0b962e3e7589b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 11 Apr 2012 18:47:53 +0200
+Subject: [PATCH 68/70] MIPS: lantiq: stp, fix for ase, add get, clock
+ disabled
+
+Lantiq serial-to-parallel hardware gpio module
+Added gpio pins as used for amazon se (ase)
+Added get to enable reporting of gpio status
+Changed to use software update, as hw clock was not running on ase. Clock
+really only needed if hw flashing was implemented.
+
+Signed-off-by: Conor O'Gorman <i@conorogorman.net>
+---
+ arch/mips/lantiq/xway/gpio_stp.c |   22 +++++++++++++---------
+ 1 files changed, 13 insertions(+), 9 deletions(-)
+
+diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c
+index 9610c10..791beeb 100644
+--- a/arch/mips/lantiq/xway/gpio_stp.c
++++ b/arch/mips/lantiq/xway/gpio_stp.c
+@@ -27,6 +27,7 @@
+ #define LTQ_STP_AR		0x10
+ 
+ #define LTQ_STP_CON_SWU		(1 << 31)
++#define LTQ_STP_SWU_MASK	(1 << 31)
+ #define LTQ_STP_2HZ		0
+ #define LTQ_STP_4HZ		(1 << 23)
+ #define LTQ_STP_8HZ		(2 << 23)
+@@ -60,6 +61,12 @@ static void ltq_stp_set(struct gpio_chip *chip, unsigned offset, int value)
+ 	else
+ 		ltq_stp_shadow &= ~(1 << offset);
+ 	ltq_stp_w32(ltq_stp_shadow, LTQ_STP_CPU0);
++	ltq_stp_w32_mask(LTQ_STP_SWU_MASK, LTQ_STP_CON_SWU, LTQ_STP_CON0);
++}
++
++static int ltq_stp_get(struct gpio_chip *chip, unsigned offset)
++{
++	return !!(ltq_stp_r32(LTQ_STP_CPU0) & (1<<offset));
+ }
+ 
+ static int ltq_stp_direction_output(struct gpio_chip *chip, unsigned offset,
+@@ -74,6 +81,7 @@ static struct gpio_chip ltq_stp_chip = {
+ 	.label = "ltq_stp",
+ 	.direction_output = ltq_stp_direction_output,
+ 	.set = ltq_stp_set,
++	.get = ltq_stp_get,
+ 	.base = 200,
+ 	.ngpio = 24,
+ 	.owner = THIS_MODULE,
+@@ -97,12 +105,6 @@ static int ltq_stp_hw_init(struct device *dev)
+ 	ltq_stp_w32_mask(0, LTQ_STP_GROUP0 | LTQ_STP_GROUP1 | LTQ_STP_GROUP2,
+ 		LTQ_STP_CON1);
+ 
+-	/* stp are update periodically by the FPI bus */
+-	ltq_stp_w32_mask(LTQ_STP_UPD_MASK, LTQ_STP_UPD_FPI, LTQ_STP_CON1);
+-
+-	/* set stp update speed */
+-	ltq_stp_w32_mask(LTQ_STP_SPEED_MASK, LTQ_STP_8HZ, LTQ_STP_CON1);
+-
+ 	/* tell the hardware that pin (led) 0 and 1 are controlled
+ 	 *  by the dsl arc
+ 	 */
+@@ -118,6 +120,7 @@ static int __devinit ltq_stp_probe(struct platform_device *pdev)
+ {
+ 	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ 	int ret = 0;
++	int pin;
+ 
+ 	if (!res)
+ 		return -ENOENT;
+@@ -135,9 +138,10 @@ static int __devinit ltq_stp_probe(struct platform_device *pdev)
+ 	}
+ 
+ 	/* the 3 pins used to control the external stp */
+-	if (ltq_gpio_request(&pdev->dev, 4, 2, 1, "stp-st") ||
+-			ltq_gpio_request(&pdev->dev, 5, 2, 1, "stp-d") ||
+-			ltq_gpio_request(&pdev->dev, 6, 2, 1, "stp-sh")) {
++	pin = ltq_is_ase() ? 1 : 4;
++	if (ltq_gpio_request(&pdev->dev, pin, 2, 1, "stp-st") ||
++			ltq_gpio_request(&pdev->dev, pin+1, 2, 1, "stp-d") ||
++			ltq_gpio_request(&pdev->dev, pin+2, 2, 1, "stp-sh")) {
+ 		dev_err(&pdev->dev, "failed to request needed gpios\n");
+ 		return -EBUSY;
+ 	}
+-- 
+1.7.9.1
+
diff --git a/target/linux/lantiq/patches-3.3/0069-MIPS-lantiq-fix-spi-for-ase-update-for-clkdev-and-pl.patch b/target/linux/lantiq/patches-3.3/0069-MIPS-lantiq-fix-spi-for-ase-update-for-clkdev-and-pl.patch
new file mode 100644
index 0000000000..2ea1547ca3
--- /dev/null
+++ b/target/linux/lantiq/patches-3.3/0069-MIPS-lantiq-fix-spi-for-ase-update-for-clkdev-and-pl.patch
@@ -0,0 +1,197 @@
+From e765119d933dd84de2c095d422f1609486775f79 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 12 Apr 2012 13:25:42 +0200
+Subject: [PATCH 69/70] MIPS: lantiq: fix spi for ase, update for clkdev and
+ platform driver
+
+irqs, gpios, chipselects
+updated to use module_platform_driver()
+clkdev is a bit hacky, using ltq_spi.0, as specifying no device numbering led to
+the mtd driver not hooking up to an spi flash.
+
+Signed-off-by: Conor O'Gorman <i@conorogorman.net>
+---
+ .../mips/include/asm/mach-lantiq/xway/lantiq_irq.h |    4 ++
+ arch/mips/lantiq/xway/sysctrl.c                    |    2 +-
+ drivers/spi/spi-xway.c                             |   58 ++++++++++----------
+ 3 files changed, 35 insertions(+), 29 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
+index d9c892b..d86acdd 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
+@@ -30,6 +30,10 @@
+ #define LTQ_SSC_TIR_AR9		(INT_NUM_IM0_IRL0 + 14)
+ #define LTQ_SSC_RIR_AR9		(INT_NUM_IM0_IRL0 + 15)
+ #define LTQ_SSC_EIR		(INT_NUM_IM0_IRL0 + 16)
++#define LTQ_SSC_RIR_ASE		(INT_NUM_IM0_IRL0 + 16)
++#define LTQ_SSC_TIR_ASE		(INT_NUM_IM0_IRL0 + 17)
++#define LTQ_SSC_EIR_ASE		(INT_NUM_IM0_IRL0 + 18)
++#define LTQ_SSC_FIR_ASE		(INT_NUM_IM0_IRL0 + 19)
+ 
+ #define LTQ_MEI_DYING_GASP_INT	(INT_NUM_IM1_IRL0 + 21)
+ #define LTQ_MEI_INT		(INT_NUM_IM1_IRL0 + 23)
+diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
+index 5807456..de4ce8f 100644
+--- a/arch/mips/lantiq/xway/sysctrl.c
++++ b/arch/mips/lantiq/xway/sysctrl.c
+@@ -233,7 +233,7 @@ void __init ltq_soc_init(void)
+ 	clkdev_add_pmu("ltq_fpi", NULL, 0, PMU_FPI);
+ 	clkdev_add_pmu("ltq_dma", NULL, 0, PMU_DMA);
+ 	clkdev_add_pmu("ltq_stp", NULL, 0, PMU_STP);
+-	clkdev_add_pmu("ltq_spi", NULL, 0, PMU_SPI);
++	clkdev_add_pmu("ltq_spi.0", NULL, 0, PMU_SPI);
+         clkdev_add_pmu("ltq_gptu", NULL, 0, PMU_GPT);
+         clkdev_add_pmu("ltq_ebu", NULL, 0, PMU_EBU);
+ 	if (!ltq_is_vr9())
+diff --git a/drivers/spi/spi-xway.c b/drivers/spi/spi-xway.c
+index 016a6d0..be5c25b 100644
+--- a/drivers/spi/spi-xway.c
++++ b/drivers/spi/spi-xway.c
+@@ -143,9 +143,9 @@
+ #define LTQ_SPI_IRNEN_ALL	0xF
+ 
+ /* Hard-wired GPIOs used by SPI controller */
+-#define LTQ_SPI_GPIO_DI 	16
+-#define LTQ_SPI_GPIO_DO		17
+-#define LTQ_SPI_GPIO_CLK	18
++#define LTQ_SPI_GPIO_DI 	(ltq_is_ase()?  8 : 16)
++#define LTQ_SPI_GPIO_DO 	(ltq_is_ase()?  9 : 17)
++#define LTQ_SPI_GPIO_CLK	(ltq_is_ase()? 10 : 18)
+ 
+ struct ltq_spi {
+ 	struct spi_bitbang	bitbang;
+@@ -229,7 +229,7 @@ static void ltq_spi_hw_enable(struct ltq_spi *hw)
+ 	u32 clc;
+ 
+ 	/* Power-up mdule */
+-        clk_enable(hw->spiclk);
++	clk_enable(hw->spiclk);
+ 
+ 	/*
+ 	 * Set clock divider for run mode to 1 to
+@@ -245,7 +245,7 @@ static void ltq_spi_hw_disable(struct ltq_spi *hw)
+ 	ltq_spi_reg_write(hw, LTQ_SPI_CLC_DISS, LTQ_SPI_CLC);
+ 
+ 	/* Power-down mdule */
+-        clk_disable(hw->spiclk);
++	clk_disable(hw->spiclk);
+ }
+ 
+ static void ltq_spi_reset_fifos(struct ltq_spi *hw)
+@@ -284,7 +284,7 @@ static inline int ltq_spi_wait_ready(struct ltq_spi *hw)
+ 		cond_resched();
+ 	} while (!time_after_eq(jiffies, timeout));
+ 
+-	dev_err(hw->dev, "SPI wait ready timed out\n");
++	dev_err(hw->dev, "SPI wait ready timed out stat: %x\n", stat);
+ 
+ 	return -ETIMEDOUT;
+ }
+@@ -556,6 +556,12 @@ static const struct ltq_spi_cs_gpio_map ltq_spi_cs[] = {
+ 	{ 11, 3 },
+ };
+ 
++static const struct ltq_spi_cs_gpio_map ltq_spi_cs_ase[] = {
++	{  7, 2 },
++	{ 15, 1 },
++	{ 14, 1 },
++};
++
+ static int ltq_spi_setup(struct spi_device *spi)
+ {
+ 	struct ltq_spi *hw = ltq_spi_to_hw(spi);
+@@ -600,8 +606,10 @@ static int ltq_spi_setup(struct spi_device *spi)
+ 		cstate->cs_activate = ltq_spi_gpio_cs_activate;
+ 		cstate->cs_deactivate = ltq_spi_gpio_cs_deactivate;
+ 	} else {
+-		ret = ltq_gpio_request(&spi->dev, ltq_spi_cs[spi->chip_select].gpio,
+-				ltq_spi_cs[spi->chip_select].mux,
++		struct ltq_spi_cs_gpio_map *cs_map =
++				ltq_is_ase() ? ltq_spi_cs_ase : ltq_spi_cs;
++		ret = ltq_gpio_request(&spi->dev, cs_map[spi->chip_select].gpio,
++				cs_map[spi->chip_select].mux,
+ 				1, "spi-cs");
+ 		if (ret)
+ 			return -EBUSY;
+@@ -633,7 +641,8 @@ static void ltq_spi_cleanup(struct spi_device *spi)
+ 	if (cdata && cdata->gpio)
+ 		gpio = cdata->gpio;
+ 	else
+-		gpio = ltq_spi_cs[spi->chip_select].gpio;
++		gpio = ltq_is_ase() ? ltq_spi_cs_ase[spi->chip_select].gpio :
++					 ltq_spi_cs[spi->chip_select].gpio;
+ 
+ 	gpio_free(gpio);
+ 	kfree(cstate);
+@@ -868,7 +877,8 @@ static const struct ltq_spi_irq_map ltq_spi_irqs[] = {
+ 	{ "spi_err", ltq_spi_err_irq },
+ };
+ 
+-static int __init ltq_spi_probe(struct platform_device *pdev)
++static int __devinit
++ltq_spi_probe(struct platform_device *pdev)
+ {
+ 	struct spi_master *master;
+ 	struct resource *r;
+@@ -910,14 +920,14 @@ static int __init ltq_spi_probe(struct platform_device *pdev)
+ 
+ 	hw->fpiclk = clk_get_fpi();
+ 	if (IS_ERR(hw->fpiclk)) {
+-		dev_err(&pdev->dev, "clk_get\n");
++		dev_err(&pdev->dev, "fpi clk\n");
+ 		ret = PTR_ERR(hw->fpiclk);
+ 		goto err_master;
+ 	}
+ 
+ 	hw->spiclk = clk_get(&pdev->dev, NULL);
+ 	if (IS_ERR(hw->spiclk)) {
+-		dev_err(&pdev->dev, "clk_get\n");
++		dev_err(&pdev->dev, "spi clk\n");
+ 		ret = PTR_ERR(hw->spiclk);
+ 		goto err_master;
+ 	}
+@@ -1014,7 +1024,8 @@ err:
+ 	return ret;
+ }
+ 
+-static int __exit ltq_spi_remove(struct platform_device *pdev)
++static int __devexit
++ltq_spi_remove(struct platform_device *pdev)
+ {
+ 	struct ltq_spi *hw = platform_get_drvdata(pdev);
+ 	int ret, i;
+@@ -1043,24 +1054,15 @@ static int __exit ltq_spi_remove(struct platform_device *pdev)
+ }
+ 
+ static struct platform_driver ltq_spi_driver = {
++	.probe = ltq_spi_probe,
++	.remove = __devexit_p(ltq_spi_remove),
+ 	.driver = {
+-		   .name = "ltq_spi",
+-		   .owner = THIS_MODULE,
+-		   },
+-	.remove = __exit_p(ltq_spi_remove),
++		.name = "ltq_spi",
++		.owner = THIS_MODULE,
++		},
+ };
+ 
+-static int __init ltq_spi_init(void)
+-{
+-	return platform_driver_probe(&ltq_spi_driver, ltq_spi_probe);
+-}
+-module_init(ltq_spi_init);
+-
+-static void __exit ltq_spi_exit(void)
+-{
+-	platform_driver_unregister(&ltq_spi_driver);
+-}
+-module_exit(ltq_spi_exit);
++module_platform_driver(ltq_spi_driver);
+ 
+ MODULE_DESCRIPTION("Lantiq SoC SPI controller driver");
+ MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>");
+-- 
+1.7.9.1
+