aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorDavid Bauer <mail@david-bauer.net>2018-05-29 17:00:53 +0200
committerJohn Crispin <john@phrozen.org>2018-06-07 09:31:58 +0200
commite36f8b3f3980903d5cefc51fe274c19c7a0719f2 (patch)
tree9b3a86a9d695efc09b565dcf88f14dbe28da7253 /target/linux
parenta84962ea35e4e97f1c4a42f2eac0242cc2cbd879 (diff)
downloadupstream-e36f8b3f3980903d5cefc51fe274c19c7a0719f2.tar.gz
upstream-e36f8b3f3980903d5cefc51fe274c19c7a0719f2.tar.bz2
upstream-e36f8b3f3980903d5cefc51fe274c19c7a0719f2.zip
ar71xx: add support for OCEDO Koala
This commit adds support for the OCEDO Koala SOC: Qualcomm QCA9558 (Scorpion) RAM: 128MB FLASH: 16MiB WLAN1: QCA9558 2.4 GHz 802.11bgn 3x3 WLAN2: QCA9880 5 GHz 802.11nac 3x3 INPUT: RESET button LED: Power, LAN, WiFi 2.4, WiFi 5, SYS Serial: Header Next to Black metal shield Pinout is 3.3V - GND - TX - RX (Arrow Pad is 3.3V) The Serial setting is 115200-8-N-1. Tested and working: - Ethernet - 2.4 GHz WiFi - 5 GHz WiFi - TFTP boot from ramdisk image - Installation via ramdisk image - OpenWRT sysupgrade - Buttons - LEDs Installation seems to be possible only through booting an OpenWRT ramdisk image. Hold down the reset button while powering on the device. It will load a ramdisk image named 'koala-uImage-initramfs-lzma.bin' from 192.168.100.8. Note: depending on the present software, the device might also try to pull a file called 'koala-uimage-factory'. Only the name differs, it is still used as a ramdisk image. Wait for the ramdisk image to boot. OpenWRT can be written to the flash via sysupgrade or mtd. Due to the flip-flop bootloader which we not (yet) support, you need to set the partition the bootloader is selecting. It is possible from the initramfs image with > fw_setenv bootcmd run bootcmd_1 Afterwards you can reboot the device. Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/01_leds5
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ar71xx/base-files/etc/diag.sh3
-rw-r--r--target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata4
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ar71xx/config-4.91
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt10
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Makefile1
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-koala.c161
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h1
-rw-r--r--target/linux/ar71xx/generic/config-default1
-rw-r--r--target/linux/ar71xx/image/generic-senao.mk13
13 files changed, 205 insertions, 0 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index f436854384..b53aafb0ee 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -423,6 +423,11 @@ hornet-ub-x2)
ucidef_set_led_wlan "wlan" "WLAN" "alfa:blue:wlan" "phy0tpt"
ucidef_set_led_usbdev "usb" "USB" "alfa:blue:usb" "1-1"
;;
+koala)
+ ucidef_set_led_default "power" "POWER" "$board:green:power" "1"
+ ucidef_set_led_wlan "wlan2g" "WLAN 2.4GHz" "$board:yellow:wlan2" "phy1tpt"
+ ucidef_set_led_wlan "wlan5g" "WLAN 5GHz" "$board:red:wlan58" "phy0tpt"
+ ;;
lan-turtle)
ucidef_set_led_netdev "wan" "WAN" "$board:orange:system" "eth1"
;;
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 47153d9481..5044e7f92b 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -82,6 +82,7 @@ ar71xx_setup_interfaces()
fritz300e|\
gl-usb150|\
hiveap-121|\
+ koala|\
lbe-m5|\
loco-m-xw|\
mr12|\
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 03c639a2b7..1530dded12 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -260,6 +260,9 @@ get_status_led() {
jwap230)
status_led="$board:green:led1"
;;
+ koala)
+ status_led="$board:blue:sys"
+ ;;
lan-turtle)
status_led="$board:orange:system"
;;
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index f82026c7ad..c3ae7b64ec 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -105,6 +105,10 @@ case "$FIRMWARE" in
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
;;
+ koala)
+ ath10kcal_extract "art" 20480 2116
+ ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 12) +0)
+ ;;
mc-mac1200r)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1)
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index c64520d6f2..ce9225ec94 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -768,6 +768,9 @@ ar71xx_board_detect() {
*"JWAP230")
name="jwap230"
;;
+ *"Koala")
+ name="koala"
+ ;;
*"LAN Turtle")
name="lan-turtle"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index b3342e3feb..192c4a7608 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -689,6 +689,7 @@ platform_check_image() {
# these boards use metadata images
fritz300e|\
fritz4020|\
+ koala|\
rb-750-r2|\
rb-750p-pbr2|\
rb-750up-r2|\
diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9
index 9eae158ebe..0c0f8f50a1 100644
--- a/target/linux/ar71xx/config-4.9
+++ b/target/linux/ar71xx/config-4.9
@@ -133,6 +133,7 @@ CONFIG_ATH79=y
# CONFIG_ATH79_MACH_JA76PF is not set
# CONFIG_ATH79_MACH_JWAP003 is not set
# CONFIG_ATH79_MACH_JWAP230 is not set
+# CONFIG_ATH79_MACH_KOALA is not set
# CONFIG_ATH79_MACH_LAN_TURTLE is not set
# CONFIG_ATH79_MACH_LIMA is not set
# CONFIG_ATH79_MACH_MC_MAC1200R is not set
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 7400f2c86d..72b3fe0aea 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -960,6 +960,16 @@ config ATH79_MACH_JWAP230
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_KOALA
+ bool "OCEDO Koala board support"
+ select SOC_QCA955X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_ETH
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_WAM250
bool "Samsung WAM250 support"
select SOC_AR934X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index b6c77b2029..cdd1d40c96 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -143,6 +143,7 @@ obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o
obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
obj-$(CONFIG_ATH79_MACH_JWAP230) += mach-jwap230.o
+obj-$(CONFIG_ATH79_MACH_KOALA) += mach-koala.o
obj-$(CONFIG_ATH79_MACH_LAN_TURTLE) += mach-lan-turtle.o
obj-$(CONFIG_ATH79_MACH_LIMA) += mach-lima.o
obj-$(CONFIG_ATH79_MACH_MC_MAC1200R) += mach-mc-mac1200r.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-koala.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-koala.c
new file mode 100644
index 0000000000..48354b4d2c
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-koala.c
@@ -0,0 +1,161 @@
+/*
+ * OCEDO Koala board support
+ * Based on the MR1750 machine file
+ *
+ * Copyright (c) 2012 Qualcomm Atheros
+ * Copyright (c) 2012-2013 Marek Lindner <marek@open-mesh.com>
+ * Copyright (c) 2018 David Bauer <mail@david-bauer.net>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <linux/platform_data/phy-at803x.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-eth.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define KOALA_GPIO_LED_POWER 22
+#define KOALA_GPIO_LED_WLAN_5G 13
+#define KOALA_GPIO_LED_WLAN_2G 23
+#define KOALA_GPIO_LED_WLAN_SYS 19
+
+#define KOALA_GPIO_BTN_RESET 17
+
+#define KOALA_KEYS_POLL_INTERVAL 20 /* msecs */
+#define KOALA_KEYS_DEBOUNCE_INTERVAL (3 * KOALA_KEYS_POLL_INTERVAL)
+
+#define KOALA_LAN_MAC_OFFSET 0
+#define KOALA_WIFI2G_MAC_OFFSET 0x06
+#define KOALA_WMAC_CALDATA_OFFSET 0x1000
+
+static struct gpio_led koala_leds_gpio[] __initdata = {
+ {
+ .name = "koala:green:power",
+ .gpio = KOALA_GPIO_LED_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "koala:red:wlan58",
+ .gpio = KOALA_GPIO_LED_WLAN_5G,
+ .active_low = 1,
+ },
+ {
+ .name = "koala:yellow:wlan2",
+ .gpio = KOALA_GPIO_LED_WLAN_2G,
+ .active_low = 1,
+ },
+ {
+ .name = "koala:blue:sys",
+ .gpio = KOALA_GPIO_LED_WLAN_SYS,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button koala_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = KOALA_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = KOALA_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+};
+
+static struct at803x_platform_data koala_at803x_data = {
+ .disable_smarteee = 1,
+ .enable_rgmii_rx_delay = 1,
+ .enable_rgmii_tx_delay = 0,
+ .fixup_rgmii_tx_delay = 1,
+};
+
+static struct mdio_board_info koala_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 5,
+ .platform_data = &koala_at803x_data,
+ },
+};
+
+static void __init koala_setup_qca955x_eth_cfg(u32 mask,
+ unsigned int rxd,
+ unsigned int rxdv,
+ unsigned int txd,
+ unsigned int txe)
+{
+ void __iomem *base;
+ u32 t;
+
+ base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
+
+ t = mask;
+ t |= rxd << QCA955X_ETH_CFG_RXD_DELAY_SHIFT;
+ t |= rxdv << QCA955X_ETH_CFG_RDV_DELAY_SHIFT;
+ t |= txd << QCA955X_ETH_CFG_TXD_DELAY_SHIFT;
+ t |= txe << QCA955X_ETH_CFG_TXE_DELAY_SHIFT;
+
+ __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
+
+ iounmap(base);
+}
+
+static void __init koala_setup(void)
+{
+ u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
+ u8 mac[6];
+
+ ath79_eth0_pll_data.pll_1000 = 0xae000000;
+ ath79_eth0_pll_data.pll_100 = 0xa0000101;
+ ath79_eth0_pll_data.pll_10 = 0xa0001313;
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(koala_leds_gpio),
+ koala_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, KOALA_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(koala_gpio_keys),
+ koala_gpio_keys);
+
+ ath79_init_mac(mac, art + KOALA_WIFI2G_MAC_OFFSET, 0);
+ ath79_register_wmac(art + KOALA_WMAC_CALDATA_OFFSET, mac);
+ ath79_register_pci();
+
+ koala_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN, 3, 3, 0, 0);
+ ath79_register_mdio(0, 0x0);
+
+ mdiobus_register_board_info(koala_mdio0_info,
+ ARRAY_SIZE(koala_mdio0_info));
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, art + KOALA_LAN_MAC_OFFSET, 0);
+
+ /* GMAC0 is connected to the RMGII interface */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(5);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+
+ ath79_register_eth(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_KOALA, "KOALA", "OCEDO Koala", koala_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 1457d8b347..3a1f66cefd 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -141,6 +141,7 @@ enum ath79_mach_type {
ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */
ATH79_MACH_JWAP003, /* jjPlus JWAP003 */
ATH79_MACH_JWAP230, /* jjPlus JWAP230 */
+ ATH79_MACH_KOALA, /* OCEDO Koala */
ATH79_MACH_LAN_TURTLE, /* Hak5 LAN Turtle */
ATH79_MACH_LIMA, /* 8devices Lima */
ATH79_MACH_MC_MAC1200R, /* MERCURY MAC1200R */
diff --git a/target/linux/ar71xx/generic/config-default b/target/linux/ar71xx/generic/config-default
index 53281c1250..0dc64165de 100644
--- a/target/linux/ar71xx/generic/config-default
+++ b/target/linux/ar71xx/generic/config-default
@@ -105,6 +105,7 @@ CONFIG_ATH79_MACH_HORNET_UB=y
CONFIG_ATH79_MACH_JA76PF=y
CONFIG_ATH79_MACH_JWAP003=y
CONFIG_ATH79_MACH_JWAP230=y
+CONFIG_ATH79_MACH_KOALA=y
CONFIG_ATH79_MACH_LAN_TURTLE=y
CONFIG_ATH79_MACH_LIMA=y
CONFIG_ATH79_MACH_MC_MAC1200R=y
diff --git a/target/linux/ar71xx/image/generic-senao.mk b/target/linux/ar71xx/image/generic-senao.mk
index 3a7f6776b3..f5473126dd 100644
--- a/target/linux/ar71xx/image/generic-senao.mk
+++ b/target/linux/ar71xx/image/generic-senao.mk
@@ -26,3 +26,16 @@ define Device/ens202ext
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
endef
TARGET_DEVICES += ens202ext
+
+define Device/koala
+ DEVICE_TITLE := OCEDO Koala
+ BOARDNAME := KOALA
+ DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
+ KERNEL_SIZE := 1536k
+ IMAGE_SIZE := 7424k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),1536k(kernel),5888k(rootfs),1536k(kernel2),5888k(rootfs2),1088k(data)ro,64k(id)ro,64k(art)ro,7424k@0x50000(firmware)
+ KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma
+ KERNEL_INITRAMFS := $$(KERNEL)
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += koala