aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorJohn Crispin <john@openwrt.org>2015-11-02 10:18:02 +0000
committerJohn Crispin <john@openwrt.org>2015-11-02 10:18:02 +0000
commit907c67fa87143dacd91cc4370f6b85a8fb3d0d12 (patch)
treed9f2f686cb61740a14eddb6171a12d7c7da75739 /target/linux
parent3760b95702b65de9d6d0f6a1029a654e3b11f72f (diff)
downloadupstream-907c67fa87143dacd91cc4370f6b85a8fb3d0d12.tar.gz
upstream-907c67fa87143dacd91cc4370f6b85a8fb3d0d12.tar.bz2
upstream-907c67fa87143dacd91cc4370f6b85a8fb3d0d12.zip
ramips: preinit: use iproute2 instead of vconfig
Replace use of vconfig with the corresponding iproute2 syntax in /lib/preinit/07_set_preinit_iface_ramips The switch reset work-around needed on some ramips targets used the deprecated vconfig tool to bring up the pre-init/failsafe interface. This doesn't work on recent builds where vconfig is no longer being deployed, resulting in the device being unreachable when triggered into failsafe mode. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 47349
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips4
1 files changed, 2 insertions, 2 deletions
diff --git a/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips b/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips
index 90b6d15057..3dce1b667b 100644
--- a/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips
+++ b/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips
@@ -23,8 +23,8 @@ ramips_set_preinit_iface() {
swconfig dev rt305x vlan 1 set ports "0 6"
swconfig dev rt305x port 6 set untag 0
swconfig dev rt305x set apply 1
- vconfig add eth0 1
- ifconfig eth0 up
+ ip link add link eth0 name eth0.1 type vlan id 1
+ ip link set eth0 up
ifname=eth0.1
else
ifname=eth0