aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorLiu Yu <f78fk@live.com>2019-05-05 10:54:52 +0800
committerChristian Lamparter <chunkeey@gmail.com>2019-05-18 13:43:55 +0200
commit671c9d16e382bcace441d8ad07816f8ceeed3612 (patch)
tree749a577c94524d8bbd8d15e934f1d0d96ff98013 /target/linux
parent30dcbc741d84e36ea5408d99593ccb35f900cb5e (diff)
downloadupstream-671c9d16e382bcace441d8ad07816f8ceeed3612.tar.gz
upstream-671c9d16e382bcace441d8ad07816f8ceeed3612.tar.bz2
upstream-671c9d16e382bcace441d8ad07816f8ceeed3612.zip
ramips: add support for HILINK HLK-7628N
Specification: CPU: MT7628 580 MHz. MIPS 24K RAM: 128 MB Flash: 32 MB WIFI: 802.11n/g/b 20/40 MHz Ethernet: 5 Port ethernet switch UART: 2x Flash instruction: The U-boot is based on Ralink SDK so we can flash the firmware using UART: 1. Configure PC with a static IP address and setup an TFTP server. 2. Put the firmware into the tftp directory. 3. Connect the UART0 line as described on the PCB. 4. Power up the device and press 2, follow the instruction to set device and tftp server IP address and input the firmware file name. U-boot will then load the firmware and write it into the flash. 5. After firmware is started connect via ethernet at 192.168.1.1 Signed-off-by: Liu Yu <f78fk@live.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [removed dupped subject]
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds1
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network2
-rw-r--r--target/linux/ramips/dts/HLK-7628N.dts99
-rw-r--r--target/linux/ramips/image/mt76x8.mk7
4 files changed, 109 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index b55ca0413e..ccbe53d770 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -17,6 +17,7 @@ case $board in
set_wifi_led "$boardname:amber:wlan"
;;
3g-6200nl|\
+hilink,hlk-7628n|\
skylab,skw92a|\
wnce2001)
set_wifi_led "$boardname:green:wlan"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 2e56678cf5..9c9517a7f3 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -220,6 +220,7 @@ ramips_setup_interfaces()
gl-mt300a|\
gl-mt300n|\
gl-mt750|\
+ hilink,hlk-7628n|\
hiwifi,hc5861b|\
jhr-n805r|\
jhr-n825r|\
@@ -498,6 +499,7 @@ ramips_setup_macs()
dir-620-a1|\
esr-9753|\
freestation5|\
+ hilink,hlk-7628n|\
hlk-rm04|\
mpr-a1|\
psr-680w|\
diff --git a/target/linux/ramips/dts/HLK-7628N.dts b/target/linux/ramips/dts/HLK-7628N.dts
new file mode 100644
index 0000000000..71c6b60ac2
--- /dev/null
+++ b/target/linux/ramips/dts/HLK-7628N.dts
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "hilink,hlk-7628n", "mediatek,mt7628an-soc";
+ model = "HILINK HLK-7628N";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "hlk-7628n:green:wlan";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x1fb0000>;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+};
+
diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk
index ba3354a8a6..0fd72a4117 100644
--- a/target/linux/ramips/image/mt76x8.mk
+++ b/target/linux/ramips/image/mt76x8.mk
@@ -81,6 +81,13 @@ define Device/hc5661a
endef
TARGET_DEVICES += hc5661a
+define Device/hilink_hlk-7628n
+ DTS := HLK-7628N
+ IMAGE_SIZE := $(ralink_default_fw_size_32M)
+ DEVICE_TITLE := HILINK HLK7628N
+endef
+TARGET_DEVICES += hilink_hlk-7628n
+
define Device/hiwifi_hc5861b
DTS := HC5861B
IMAGE_SIZE := 15808k